.1.0,LLDP-MIB::std,,,,,,
.1.0.8802,LLDP-MIB::iso8802,,,,,,
.1.0.8802.1,LLDP-MIB::ieee802dot1,,,,,,
.1.0.8802.1.1,LLDP-MIB::ieee802dot1mibs,,,,,,
.1.0.8802.1.1.2,LLDP-MIB::lldpMIB,,,,,,Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components. Copyright (C) IEEE (2005). This version of this MIB module is published as subclause 12.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices.
.1.0.8802.1.1.2.0,LLDP-MIB::lldpNotifications,,,,,,
.1.0.8802.1.1.2.0.0,LLDP-MIB::lldpNotificationPrefix,,,,,,
.1.0.8802.1.1.2.0.0.1,LLDP-MIB::lldpRemTablesChange,,,,,,A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote systems table maintenance polls. Note that transmission of lldpRemTablesChange notifications are throttled by the agent, as specified by the 'lldpNotificationInterval' object.
.1.0.8802.1.1.2.1,LLDP-MIB::lldpObjects,,,,,,
.1.0.8802.1.1.2.1.1,LLDP-MIB::lldpConfiguration,,,,,,
.1.0.8802.1.1.2.1.1.1,LLDP-MIB::lldpMessageTxInterval,Integer32,read-write,,current,,The interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpMessageTxInterval object is 30 seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.2,LLDP-MIB::lldpMessageTxHoldMultiplier,Integer32,read-write,,current,,The time-to-live value expressed as a multiple of the lldpMessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf of this LLDP agent, can be expressed by the following formula: TTL = min(65535, (lldpMessageTxInterval * lldpMessageTxHoldMultiplier)) For example, if the value of lldpMessageTxInterval is '30', and the value of lldpMessageTxHoldMultiplier is '4', then the value '120' is encoded in the TTL field in the LLDP header. The default value for lldpMessageTxHoldMultiplier object is 4. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.3,LLDP-MIB::lldpReinitDelay,Integer32,read-write,,current,,The lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted. The default value for lldpReintDelay object is two seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.4,LLDP-MIB::lldpTxDelay,Integer32,read-write,,current,,The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions  initiated by value/status changes in the LLDP local systems MIB. The recommended value for the lldpTxDelay is set by the following formula: 1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval) The default value for lldpTxDelay object is two seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.5,LLDP-MIB::lldpNotificationInterval,Integer32,read-write,,current,,This object controls the transmission of LLDP notifications. the agent must not generate more than one lldpRemTablesChange notification-event in the indicated period, where a 'notification-event' is the transmission of a single notification PDU type to a list of notification destinations. If additional changes in lldpRemoteSystemsData object groups occur within the indicated throttling period, then these trap- events must be suppressed by the agent. An NMS should periodically check the value of lldpStatsRemTableLastChangeTime to detect any missed lldpRemTablesChange notification-events, e.g. due to throttling or transmission loss. If notification transmission is enabled for particular ports, the suggested default throttling period is 5 seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.6,LLDP-MIB::lldpPortConfigTable,,not-accessible,,current,,The table that controls LLDP frame transmission on individual ports.
.1.0.8802.1.1.2.1.1.6.1,LLDP-MIB::lldpPortConfigEntry,,not-accessible,lldpPortConfigPortNum,current,,LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.
.1.0.8802.1.1.2.1.1.6.1.1,LLDP-MIB::lldpPortConfigPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpPortConfigTable.
.1.0.8802.1.1.2.1.1.6.1.2,LLDP-MIB::lldpPortConfigAdminStatus,INTEGER,read-write,,current,txOnly(1):rxOnly(2):txAndRx(3):disabled(4),The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent will transmit LLDP frames on this port and it will not store any information about the remote systems connected.  If the associated lldpPortConfigAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent will receive, but it will not transmit LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent will transmit and receive LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in other tables, before the port's lldpPortConfigAdminStatus becomes disabled, then the information will naturally age out.
.1.0.8802.1.1.2.1.1.6.1.3,LLDP-MIB::lldpPortConfigNotificationEnable,INTEGER,read-write,,current,true(1):false(2),The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.
.1.0.8802.1.1.2.1.1.6.1.4,LLDP-MIB::lldpPortConfigTLVsTxEnable,BITS,read-write,,current,portDesc(0):sysName(1):sysDesc(2):sysCap(3),The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. It should be noted that the organizationally-specific TLVs are excluded from the lldpTLVsTxEnable bitmap.  LLDP Organization Specific Information Extension MIBs should have similar configuration object to control transmission of their organizationally defined TLVs. The bit 'portDesc(0)' indicates that LLDP agent should transmit 'Port Description TLV'. The bit 'sysName(1)' indicates that LLDP agent should transmit 'System Name TLV'. The bit 'sysDesc(2)' indicates that LLDP agent should transmit 'System Description TLV'. The bit 'sysCap(3)' indicates that LLDP agent should transmit 'System Capabilities TLV'. There is no bit reserved for the management address TLV type since transmission of management address TLVs are controlled by another object, lldpConfigManAddrTable. The default value for lldpPortConfigTLVsTxEnable object is empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.7,LLDP-MIB::lldpConfigManAddrTable,,not-accessible,,current,,The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.
.1.0.8802.1.1.2.1.1.7.1,LLDP-MIB::lldpConfigManAddrEntry,,not-accessible,,current,,LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transmitted. This configuration object augments the lldpLocManAddrEntry, therefore it is only present along with the management address instance contained in the associated lldpLocManAddrEntry entry. Each active lldpConfigManAddrEntry must be restored from non-volatile and re-created (along with the corresponding lldpLocManAddrEntry) after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.7.1.1,LLDP-MIB::lldpConfigManAddrPortsTxEnable,OCTET,read-write,,current,,A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable.  The default value for lldpConfigManAddrPortsTxEnable object is empty binary string, which means no ports are specified for advertising indicated management address instance.
.1.0.8802.1.1.2.1.2,LLDP-MIB::lldpStatistics,,,,,,
.1.0.8802.1.1.2.1.2.1,LLDP-MIB::lldpStatsRemTablesLastChangeTime,TimeTicks,read-only,,current,,The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems. An NMS can use this object to reduce polling of the lldpRemoteSystemsData objects.
.1.0.8802.1.1.2.1.2.2,LLDP-MIB::lldpStatsRemTablesInserts,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects. The complete set of information received from a particular MSAP should be inserted into related tables. If partial information cannot be inserted for a reason such as lack of resources, all of the complete set of information should be removed. This counter should be incremented only once after the complete set of information is successfully recorded in all related tables. Any failures during inserting information set which result in deletion of previously inserted information should not trigger any changes in lldpStatsRemTablesInserts since the insert is not completed yet or or in lldpStatsRemTablesDeletes, since the deletion would only be a partial deletion. If the failure was the result of lack of resources, the lldpStatsRemTablesDrops counter should be incremented once.
.1.0.8802.1.1.2.1.2.3,LLDP-MIB::lldpStatsRemTablesDeletes,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects. This counter should be incremented only once when the complete set of information is completely deleted from all related tables. Partial deletions, such as deletion of rows associated with a particular MSAP from some tables, but not from all tables are not allowed, thus should not change the value of this counter.
.1.0.8802.1.1.2.1.2.4,LLDP-MIB::lldpStatsRemTablesDrops,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.
.1.0.8802.1.1.2.1.2.5,LLDP-MIB::lldpStatsRemTablesAgeouts,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter should be incremented only once when the complete set of information is completely invalidated (aged out) from all related tables. Partial aging, similar to deletion case, is not allowed, and thus, should not change the value of this counter.
.1.0.8802.1.1.2.1.2.6,LLDP-MIB::lldpStatsTxPortTable,,not-accessible,,current,,A table containing LLDP transmission statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.
.1.0.8802.1.1.2.1.2.6.1,LLDP-MIB::lldpStatsTxPortEntry,,not-accessible,lldpStatsTxPortNum,current,,LLDP frame transmission statistics for a particular port.  The port must be contained in the same chassis as the LLDP agent.  All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxInfoTTL timing counters in the LLDP remote systems MIB of the receipt of a shutdown frame from a remote LLDP agent. All statistical counters associated with a particular port on the local LLDP agent become frozen whenever the adminStatus is disabled for the same port.
.1.0.8802.1.1.2.1.2.6.1.1,LLDP-MIB::lldpStatsTxPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.
.1.0.8802.1.1.2.1.2.6.1.2,LLDP-MIB::lldpStatsTxPortFramesTotal,Counter32,read-only,,current,,The number of LLDP frames transmitted by this LLDP agent on the indicated port.
.1.0.8802.1.1.2.1.2.7,LLDP-MIB::lldpStatsRxPortTable,,not-accessible,,current,,A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.
.1.0.8802.1.1.2.1.2.7.1,LLDP-MIB::lldpStatsRxPortEntry,,not-accessible,lldpStatsRxPortNum,current,,LLDP frame reception statistics for a particular port. The port must be contained in the same chassis as the LLDP agent.  All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxInfoTTL timing counters in the LLDP remote systems MIB of the receipt of a shutdown frame from a remote LLDP agent. All statistical counters associated with a particular port on the local LLDP agent become frozen whenever the adminStatus is disabled for the same port.
.1.0.8802.1.1.2.1.2.7.1.1,LLDP-MIB::lldpStatsRxPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.
.1.0.8802.1.1.2.1.2.7.1.2,LLDP-MIB::lldpStatsRxPortFramesDiscardedTotal,Counter32,read-only,,current,,The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formating problems may exist with the local LLDP agent in the sending system or that LLDPDU validation problems may exist with the local LLDP agent in the receiving system.
.1.0.8802.1.1.2.1.2.7.1.3,LLDP-MIB::lldpStatsRxPortFramesErrors,Counter32,read-only,,current,,The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
.1.0.8802.1.1.2.1.2.7.1.4,LLDP-MIB::lldpStatsRxPortFramesTotal,Counter32,read-only,,current,,The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
.1.0.8802.1.1.2.1.2.7.1.5,LLDP-MIB::lldpStatsRxPortTLVsDiscardedTotal,Counter32,read-only,,current,,The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.
.1.0.8802.1.1.2.1.2.7.1.6,LLDP-MIB::lldpStatsRxPortTLVsUnrecognizedTotal,Counter32,read-only,,current,,The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port.  An unrecognized TLV is referred to as the TLV whose type value is in the range of reserved TLV types (000 1001 - 111 1110) in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized TLV may be a basic management TLV from a later LLDP version.
.1.0.8802.1.1.2.1.2.7.1.7,LLDP-MIB::lldpStatsRxPortAgeoutsTotal,Gauge32,read-only,,current,,The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter is similar to lldpStatsRemTablesAgeouts, except that the counter is on a per port basis. This enables NMS to poll tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems on the indicated port only. This counter should be set to zero during agent initialization and its value should not be saved in non-volatile storage. When a port's admin status changes from 'disabled' to 'rxOnly', 'txOnly' or 'txAndRx', the counter associated with the same port should reset to 0. The agent should also flush all remote system information associated with the same port. This counter should be incremented only once when the complete set of information is invalidated (aged out) from all related tables on a particular port. Partial aging is not allowed, and thus, should not change the value of this counter.
.1.0.8802.1.1.2.1.3,LLDP-MIB::lldpLocalSystemData,,,,,,
.1.0.8802.1.1.2.1.3.1,LLDP-MIB::lldpLocChassisIdSubtype,INTEGER,read-only,,current,chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7),The type of encoding used to identify the chassis associated with the local system.
.1.0.8802.1.1.2.1.3.2,LLDP-MIB::lldpLocChassisId,OCTET,read-only,,current,,The string value used to identify the chassis component associated with the local system.
.1.0.8802.1.1.2.1.3.3,LLDP-MIB::lldpLocSysName,OCTET,read-only,,current,,The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same value of sysName object.
.1.0.8802.1.1.2.1.3.4,LLDP-MIB::lldpLocSysDesc,OCTET,read-only,,current,,The string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the same value of sysDesc object.
.1.0.8802.1.1.2.1.3.5,LLDP-MIB::lldpLocSysCapSupported,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are supported on the local system.
.1.0.8802.1.1.2.1.3.6,LLDP-MIB::lldpLocSysCapEnabled,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are enabled on the local system.
.1.0.8802.1.1.2.1.3.7,LLDP-MIB::lldpLocPortTable,,not-accessible,,current,,This table contains one or more rows per port information associated with the local system known to this agent.
.1.0.8802.1.1.2.1.3.7.1,LLDP-MIB::lldpLocPortEntry,,not-accessible,lldpLocPortNum,current,,Information about a particular port component. Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.3.7.1.1,LLDP-MIB::lldpLocPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.  The value of this object is used as a port index to the lldpLocPortTable.
.1.0.8802.1.1.2.1.3.7.1.2,LLDP-MIB::lldpLocPortIdSubtype,INTEGER,read-only,,current,interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7),The type of port identifier encoding used in the associated 'lldpLocPortId' object.
.1.0.8802.1.1.2.1.3.7.1.3,LLDP-MIB::lldpLocPortId,OCTET,read-only,,current,,The string value used to identify the port component associated with a given port in the local system.
.1.0.8802.1.1.2.1.3.7.1.4,LLDP-MIB::lldpLocPortDesc,OCTET,read-only,,current,,The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object.
.1.0.8802.1.1.2.1.3.8,LLDP-MIB::lldpLocManAddrTable,,not-accessible,,current,,This table contains management address information on the local system known to this agent.
.1.0.8802.1.1.2.1.3.8.1,LLDP-MIB::lldpLocManAddrEntry,,not-accessible,lldpLocManAddrSubtype:lldpLocManAddr,current,,Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a particular lldpLocChassisId. Each management address should have distinct 'management address type' (lldpLocManAddrSubtype) and 'management address' (lldpLocManAddr.) Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.3.8.1.1,LLDP-MIB::lldpLocManAddrSubtype,INTEGER,not-accessible,,current,other(0):ipV4(1):ipV6(2):nsap(3):hdlc(4):bbn1822(5):all802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164withNsap(15):dns(16):distinguishedName(17):asNumber(18):xtpOverIpv4(19):xtpOverIpv6(20):xtpNativeModeXTP(21):fibreChannelWWPN(22):fibreChannelWWNN(23):gwid(24):afi(25):mplsTpSectionEndpointIdentifier(26):mplsTpLspEndpointIdentifier(27):mplsTpPseudowireEndpointIdentifier(28):eigrpCommonServiceFamily(16384):eigrpIpv4ServiceFamily(16385):eigrpIpv6ServiceFamily(16386):lispCanonicalAddressFormat(16387):bgpLs(16388):fortyeightBitMac(16389):sixtyfourBitMac(16390):oui(16391):mac24(16392):mac40(16393):ipv664(16394):rBridgePortID(16395):trillNickname(16396):reserved(65535),The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.
.1.0.8802.1.1.2.1.3.8.1.2,LLDP-MIB::lldpLocManAddr,OCTET,not-accessible,,current,,The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.
.1.0.8802.1.1.2.1.3.8.1.3,LLDP-MIB::lldpLocManAddrLen,Integer32,read-only,,current,,The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address length field is needed so that the receiving systems that do not implement SNMP will not be required to implement an iana family numbers/address length equivalency table in order to decode the management adress.
.1.0.8802.1.1.2.1.3.8.1.4,LLDP-MIB::lldpLocManAddrIfSubtype,INTEGER,read-only,,current,unknown(1):ifIndex(2):systemPortNumber(3),The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.
.1.0.8802.1.1.2.1.3.8.1.5,LLDP-MIB::lldpLocManAddrIfId,Integer32,read-only,,current,,The integer value used to identify the interface number regarding the management address component associated with the local system.
.1.0.8802.1.1.2.1.3.8.1.6,LLDP-MIB::lldpLocManAddrOID,OBJECT,read-only,,current,,The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.
.1.0.8802.1.1.2.1.4,LLDP-MIB::lldpRemoteSystemsData,,,,,,
.1.0.8802.1.1.2.1.4.1,LLDP-MIB::lldpRemTable,,not-accessible,,current,,This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present for each local port, or it may choose to maintain multiple lldpRemEntries for the same local port. The following procedure may be used to retrieve remote systems information updates from an LLDP agent: 1. NMS polls all tables associated with remote systems and keeps a local copy of the information retrieved. NMS polls periodically the values of the following objects: a. lldpStatsRemTablesInserts b. lldpStatsRemTablesDeletes c. lldpStatsRemTablesDrops d. lldpStatsRemTablesAgeouts e. lldpStatsRxPortAgeoutsTotal for all ports. 2. LLDP agent updates remote systems MIB objects, and sends out notifications to a list of notification destinations. 3. NMS receives the notifications and compares the new values of objects listed in step 1.  Periodically, NMS should poll the object lldpStatsRemTablesLastChangeTime to find out if anything has changed since the last poll. if something has changed, NMS will poll the objects listed in step 1 to figure out what kind of changes occurred in the tables. if value of lldpStatsRemTablesInserts has changed, then NMS will walk all tables by employing TimeFilter with the last-polled time value. This request will return new objects or objects whose values are updated since the last poll. if value of lldpStatsRemTablesAgeouts has changed, then NMS will walk the lldpStatsRxPortAgeoutsTotal and compare the new values with previously recorded ones. For ports whose lldpStatsRxPortAgeoutsTotal value is greater than the recorded value, NMS will have to retrieve objects associated with those ports from table(s) without employing a TimeFilter (which is performed by specifying 0 for the TimeFilter.) lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops objects are provided for informational purposes.
.1.0.8802.1.1.2.1.4.1.1,LLDP-MIB::lldpRemEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex,current,,Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.
.1.0.8802.1.1.2.1.4.1.1.1,LLDP-MIB::lldpRemTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and  http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
.1.0.8802.1.1.2.1.4.1.1.2,LLDP-MIB::lldpRemLocalPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
.1.0.8802.1.1.2.1.4.1.1.3,LLDP-MIB::lldpRemIndex,Integer32,not-accessible,,current,,This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemIndex will wrap between reboots.
.1.0.8802.1.1.2.1.4.1.1.4,LLDP-MIB::lldpRemChassisIdSubtype,INTEGER,read-only,,current,chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7),The type of encoding used to identify the chassis associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.5,LLDP-MIB::lldpRemChassisId,OCTET,read-only,,current,,The string value used to identify the chassis component associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.6,LLDP-MIB::lldpRemPortIdSubtype,INTEGER,read-only,,current,interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7),The type of port identifier encoding used in the associated 'lldpRemPortId' object.
.1.0.8802.1.1.2.1.4.1.1.7,LLDP-MIB::lldpRemPortId,OCTET,read-only,,current,,The string value used to identify the port component associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.8,LLDP-MIB::lldpRemPortDesc,OCTET,read-only,,current,,The string value used to identify the description of the given port associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.9,LLDP-MIB::lldpRemSysName,OCTET,read-only,,current,,The string value used to identify the system name of the remote system.
.1.0.8802.1.1.2.1.4.1.1.10,LLDP-MIB::lldpRemSysDesc,OCTET,read-only,,current,,The string value used to identify the system description of the remote system.
.1.0.8802.1.1.2.1.4.1.1.11,LLDP-MIB::lldpRemSysCapSupported,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are supported on the remote system.
.1.0.8802.1.1.2.1.4.1.1.12,LLDP-MIB::lldpRemSysCapEnabled,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are enabled on the remote system.
.1.0.8802.1.1.2.1.4.2,LLDP-MIB::lldpRemManAddrTable,,not-accessible,,current,,This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known to this agent.
.1.0.8802.1.1.2.1.4.2.1,LLDP-MIB::lldpRemManAddrEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex:lldpRemManAddrSubtype:lldpRemManAddr,current,,Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a particular lldpRemIndex whose information is received on lldpRemLocalPortNum of the local system. Each management address should have distinct 'management address type' (lldpRemManAddrSubtype) and 'management address' (lldpRemManAddr.) Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.4.2.1.1,LLDP-MIB::lldpRemManAddrSubtype,INTEGER,not-accessible,,current,other(0):ipV4(1):ipV6(2):nsap(3):hdlc(4):bbn1822(5):all802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164withNsap(15):dns(16):distinguishedName(17):asNumber(18):xtpOverIpv4(19):xtpOverIpv6(20):xtpNativeModeXTP(21):fibreChannelWWPN(22):fibreChannelWWNN(23):gwid(24):afi(25):mplsTpSectionEndpointIdentifier(26):mplsTpLspEndpointIdentifier(27):mplsTpPseudowireEndpointIdentifier(28):eigrpCommonServiceFamily(16384):eigrpIpv4ServiceFamily(16385):eigrpIpv6ServiceFamily(16386):lispCanonicalAddressFormat(16387):bgpLs(16388):fortyeightBitMac(16389):sixtyfourBitMac(16390):oui(16391):mac24(16392):mac40(16393):ipv664(16394):rBridgePortID(16395):trillNickname(16396):reserved(65535),The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object.
.1.0.8802.1.1.2.1.4.2.1.2,LLDP-MIB::lldpRemManAddr,OCTET,not-accessible,,current,,The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.
.1.0.8802.1.1.2.1.4.2.1.3,LLDP-MIB::lldpRemManAddrIfSubtype,INTEGER,read-only,,current,unknown(1):ifIndex(2):systemPortNumber(3),The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.
.1.0.8802.1.1.2.1.4.2.1.4,LLDP-MIB::lldpRemManAddrIfId,Integer32,read-only,,current,,The integer value used to identify the interface number regarding the management address component associated with the remote system.
.1.0.8802.1.1.2.1.4.2.1.5,LLDP-MIB::lldpRemManAddrOID,OBJECT,read-only,,current,,The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.
.1.0.8802.1.1.2.1.4.3,LLDP-MIB::lldpRemUnknownTLVTable,,not-accessible,,current,,This table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic management set. This table should only contain TLVs that are found in a single LLDP frame. Entries in this table, associated with an MAC service access point (MSAP, the access point for MAC services provided to the LCC sublayer, defined in IEEE 100, which is also identified with a particular lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with most recently received unrecognized TLV from the same MSAP, or they will naturally age out when the rxInfoTTL timer (associated with the MSAP) expires.
.1.0.8802.1.1.2.1.4.3.1,LLDP-MIB::lldpRemUnknownTLVEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex:lldpRemUnknownTLVType,current,,Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.
.1.0.8802.1.1.2.1.4.3.1.1,LLDP-MIB::lldpRemUnknownTLVType,Integer32,not-accessible,,current,,This object represents the value extracted from the type field of the TLV.
.1.0.8802.1.1.2.1.4.3.1.2,LLDP-MIB::lldpRemUnknownTLVInfo,OCTET,read-only,,current,,This object represents the value extracted from the value field of the TLV.
.1.0.8802.1.1.2.1.4.4,LLDP-MIB::lldpRemOrgDefInfoTable,,not-accessible,,current,,This table contains one or more rows per physical network connection which advertises the organizationally defined information. Note that this table contains one or more rows of organizationally defined information that is not recognized by the local agent. If the local system is capable of recognizing any organizationally defined information, appropriate extension MIBs from the organization should be used for information retrieval.
.1.0.8802.1.1.2.1.4.4.1,LLDP-MIB::lldpRemOrgDefInfoEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex:lldpRemOrgDefInfoOUI:lldpRemOrgDefInfoSubtype:lldpRemOrgDefInfoIndex,current,,Information about the unrecognized organizationally defined information advertised by the remote system. The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, lldpRemOrgDefInfoOUI, lldpRemOrgDefInfoSubtype, and lldpRemOrgDefInfoIndex are indexes to this table. If there is an lldpRemOrgDefInfoEntry associated with a particular remote system identified by the lldpRemLocalPortNum and lldpRemIndex, there must be an lldpRemEntry associated with the same instance (i.e, using same indexes.) When the lldpRemEntry for the same index is removed from the lldpRemTable, the associated lldpRemOrgDefInfoEntry should be removed from the lldpRemOrgDefInfoTable. Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.4.4.1.1,LLDP-MIB::lldpRemOrgDefInfoOUI,OCTET,not-accessible,,current,,The Organizationally Unique Identifier (OUI), as defined in IEEE std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various standards, of the information received from the remote system.
.1.0.8802.1.1.2.1.4.4.1.2,LLDP-MIB::lldpRemOrgDefInfoSubtype,Integer32,not-accessible,,current,,The integer value used to identify the subtype of the organizationally defined information received from the remote system. The subtype value is required to identify different instances of organizationally defined information that could not be retrieved without a unique identifier that indicates the particular type of information contained in the information string.
.1.0.8802.1.1.2.1.4.4.1.3,LLDP-MIB::lldpRemOrgDefInfoIndex,Integer32,not-accessible,,current,,This object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance, unique only for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype from the same remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemOrgDefInfoIndex will wrap between reboots.
.1.0.8802.1.1.2.1.4.4.1.4,LLDP-MIB::lldpRemOrgDefInfo,OCTET,read-only,,current,,The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdminString TC.
.1.0.8802.1.1.2.1.5,LLDP-MIB::lldpExtensions,,,,,,
.1.0.8802.1.1.2.2,LLDP-MIB::lldpConformance,,,,,,
.1.0.8802.1.1.2.2.1,LLDP-MIB::lldpCompliances,,,,,,
.1.0.8802.1.1.2.2.1.1,LLDP-MIB::lldpCompliance,,,,,,The compliance statement for SNMP entities which implement the LLDP MIB.
.1.0.8802.1.1.2.2.2,LLDP-MIB::lldpGroups,,,,,,
.1.0.8802.1.1.2.2.2.1,LLDP-MIB::lldpConfigGroup,,,,,,The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP.
.1.0.8802.1.1.2.2.2.2,LLDP-MIB::lldpConfigRxGroup,,,,,,The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.0.8802.1.1.2.2.2.3,LLDP-MIB::lldpConfigTxGroup,,,,,,The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.
.1.0.8802.1.1.2.2.2.4,LLDP-MIB::lldpStatsRxGroup,,,,,,The collection of objects which are used to represent LLDP reception statistics. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.0.8802.1.1.2.2.2.5,LLDP-MIB::lldpStatsTxGroup,,,,,,The collection of objects which are used to represent LLDP transmission statistics. This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.
.1.0.8802.1.1.2.2.2.6,LLDP-MIB::lldpLocSysGroup,,,,,,The collection of objects which are used to represent LLDP Local System Information.   This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.
.1.0.8802.1.1.2.2.2.7,LLDP-MIB::lldpRemSysGroup,,,,,,The collection of objects which are used to represent LLDP Remote Systems Information. The objects represent the information associated with the basic TLV set. Please note that even the agent doesn't implement some of the optional TLVs, it shall recognize all the optional TLV information that the remote system may advertise.  This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.0.8802.1.1.2.2.2.8,LLDP-MIB::lldpNotificationsGroup,,,,,,The collection of notifications used to indicate LLDP MIB data consistency and general status information. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.3,SNMPv2-SMI::org,,,,,,
.1.3.6,SNMPv2-SMI::dod,,,,,,
.1.3.6.1,SNMPv2-SMI::internet,,,,,,
.1.3.6.1.1,SNMPv2-SMI::directory,,,,,,
.1.3.6.1.2,SNMPv2-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.1.8,SNMPv2-MIB::sysORLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID.
.1.3.6.1.2.1.1.9,SNMPv2-MIB::sysORTable,,not-accessible,,current,,The (conceptual) table listing the capabilities of the local SNMP application acting as a command responder with respect to various MIB modules. SNMP entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows.
.1.3.6.1.2.1.1.9.1,SNMPv2-MIB::sysOREntry,,not-accessible,sysORIndex,current,,An entry (conceptual row) in the sysORTable.
.1.3.6.1.2.1.1.9.1.1,SNMPv2-MIB::sysORIndex,INTEGER,not-accessible,,current,,The auxiliary variable used for identifying instances of the columnar objects in the sysORTable.
.1.3.6.1.2.1.1.9.1.2,SNMPv2-MIB::sysORID,OBJECT,read-only,,current,,An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMP application acting as a command responder.
.1.3.6.1.2.1.1.9.1.3,SNMPv2-MIB::sysORDescr,OCTET,read-only,,current,,A textual description of the capabilities identified by the corresponding instance of sysORID.
.1.3.6.1.2.1.1.9.1.4,SNMPv2-MIB::sysORUpTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time this conceptual row was last instantiated.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.11.31,SNMPv2-MIB::snmpSilentDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response Class PDU (such as a Response-PDU) with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request.
.1.3.6.1.2.1.11.32,SNMPv2-MIB::snmpProxyDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response Class PDU (such as a Response-PDU) could be returned.
.1.3.6.1.2.1.16,RMON-MIB::rmon,,,,,,
.1.3.6.1.2.1.16.0,RMON-MIB::rmonEventsV2,,,,,,Definition point for RMON notifications.
.1.3.6.1.2.1.16.0.1,RMON-MIB::risingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.0.2,RMON-MIB::fallingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.1,RMON-MIB::statistics,,,,,,
.1.3.6.1.2.1.16.1.1,RMON-MIB::etherStatsTable,,not-accessible,,current,,A list of Ethernet statistics entries.
.1.3.6.1.2.1.16.1.1.1,RMON-MIB::etherStatsEntry,,not-accessible,etherStatsIndex,current,,A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
.1.3.6.1.2.1.16.1.1.1.1,RMON-MIB::etherStatsIndex,Integer32,read-only,,current,,The value of this object uniquely identifies this etherStats entry.
.1.3.6.1.2.1.16.1.1.1.2,RMON-MIB::etherStatsDataSource,OBJECT,read-create,,current,,This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.1.1.3,RMON-MIB::etherStatsDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.1.1.1.4,RMON-MIB::etherStatsOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
.1.3.6.1.2.1.16.1.1.1.5,RMON-MIB::etherStatsPkts,Counter32,read-only,,current,,The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
.1.3.6.1.2.1.16.1.1.1.6,RMON-MIB::etherStatsBroadcastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
.1.3.6.1.2.1.16.1.1.1.7,RMON-MIB::etherStatsMulticastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.1.1.8,RMON-MIB::etherStatsCRCAlignErrors,Counter32,read-only,,current,,The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.1.1.1.9,RMON-MIB::etherStatsUndersizePkts,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.10,RMON-MIB::etherStatsOversizePkts,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.11,RMON-MIB::etherStatsFragments,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.1.1.1.12,RMON-MIB::etherStatsJabbers,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.1.1.1.13,RMON-MIB::etherStatsCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.1.1.1.14,RMON-MIB::etherStatsPkts64Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.15,RMON-MIB::etherStatsPkts65to127Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.16,RMON-MIB::etherStatsPkts128to255Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.17,RMON-MIB::etherStatsPkts256to511Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.18,RMON-MIB::etherStatsPkts512to1023Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.19,RMON-MIB::etherStatsPkts1024to1518Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.20,RMON-MIB::etherStatsOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.1.1.21,RMON-MIB::etherStatsStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this etherStats entry.
.1.3.6.1.2.1.16.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.1.2.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsEntry,,not-accessible,tokenRingMLStatsIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.1.2.1.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.2.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingMLStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all error reports on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingMLStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.2.1.3,TOKEN-RING-RMON-MIB::tokenRingMLStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingPStatsDropEvents.
.1.3.6.1.2.1.16.1.2.1.4,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.2.1.5,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding packets that were not good frames) received.
.1.3.6.1.2.1.16.1.2.1.6,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the ring purge state from normal ring state. The ring purge state that comes in response to the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.7,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgePkts,Counter32,read-only,,mandatory,,The total number of ring purge MAC packets detected by probe.
.1.3.6.1.2.1.16.1.2.1.8,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) from a non-beaconing state. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.1.2.1.9,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconTime,INTEGER,read-only,,mandatory,,The total amount of time that the ring has been in the beaconing state.
.1.3.6.1.2.1.16.1.2.1.10,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.11,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state. The claim token state that comes in response to a beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.12,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.13,TOKEN-RING-RMON-MIB::tokenRingMLStatsNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe.
.1.3.6.1.2.1.16.1.2.1.14,TOKEN-RING-RMON-MIB::tokenRingMLStatsLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.15,TOKEN-RING-RMON-MIB::tokenRingMLStatsInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.16,TOKEN-RING-RMON-MIB::tokenRingMLStatsBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.17,TOKEN-RING-RMON-MIB::tokenRingMLStatsACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.18,TOKEN-RING-RMON-MIB::tokenRingMLStatsAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.19,TOKEN-RING-RMON-MIB::tokenRingMLStatsLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.20,TOKEN-RING-RMON-MIB::tokenRingMLStatsCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.21,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.22,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.23,TOKEN-RING-RMON-MIB::tokenRingMLStatsTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.24,TOKEN-RING-RMON-MIB::tokenRingMLStatsSoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe.
.1.3.6.1.2.1.16.1.2.1.25,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe (i.e. the number of ring polls initiated by the active monitor that were detected).
.1.3.6.1.2.1.16.1.2.1.26,TOKEN-RING-RMON-MIB::tokenRingMLStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.2.1.27,TOKEN-RING-RMON-MIB::tokenRingMLStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.1.3.1,TOKEN-RING-RMON-MIB::tokenRingPStatsEntry,,not-accessible,tokenRingPStatsIndex,mandatory,,A collection of promiscuous statistics kept for non-MAC packets on a particular Token Ring interface.
.1.3.6.1.2.1.16.1.3.1.1,TOKEN-RING-RMON-MIB::tokenRingPStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.3.1.2,TOKEN-RING-RMON-MIB::tokenRingPStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingPStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all non-MAC packets on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingPStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.3.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingMLStatsDropEvents
.1.3.6.1.2.1.16.1.3.1.4,TOKEN-RING-RMON-MIB::tokenRingPStatsDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets.
.1.3.6.1.2.1.16.1.3.1.5,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts,Counter32,read-only,,mandatory,,The total number of non-MAC packets in good frames. received.
.1.3.6.1.2.1.16.1.3.1.6,TOKEN-RING-RMON-MIB::tokenRingPStatsDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.1.3.1.7,TOKEN-RING-RMON-MIB::tokenRingPStatsDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.3.1.8,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.9,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.10,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.11,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.12,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.13,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.14,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.15,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.16,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.17,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.18,TOKEN-RING-RMON-MIB::tokenRingPStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.3.1.19,TOKEN-RING-RMON-MIB::tokenRingPStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.4,RMON2-MIB::etherStats2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1,RMON2-MIB::etherStats2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1.1,RMON2-MIB::etherStatsDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.4.1.2,RMON2-MIB::etherStatsCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.5,RMON2-MIB::tokenRingMLStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.5.1,RMON2-MIB::tokenRingMLStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.5.1.1,RMON2-MIB::tokenRingMLStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.5.1.2,RMON2-MIB::tokenRingMLStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.6,RMON2-MIB::tokenRingPStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.6.1,RMON2-MIB::tokenRingPStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.6.1.1,RMON2-MIB::tokenRingPStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.6.1.2,RMON2-MIB::tokenRingPStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.2,RMON-MIB::history,,,,,,
.1.3.6.1.2.1.16.2.1,RMON-MIB::historyControlTable,,not-accessible,,current,,A list of history control entries.
.1.3.6.1.2.1.16.2.1.1,RMON-MIB::historyControlEntry,,not-accessible,historyControlIndex,current,,A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2
.1.3.6.1.2.1.16.2.1.1.1,RMON-MIB::historyControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.
.1.3.6.1.2.1.16.2.1.1.2,RMON-MIB::historyControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.3,RMON-MIB::historyControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.2.1.1.4,RMON-MIB::historyControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry. When the associated historyControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated historyControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this historyControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this historyControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
.1.3.6.1.2.1.16.2.1.1.5,RMON-MIB::historyControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.6,RMON-MIB::historyControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.2.1.1.7,RMON-MIB::historyControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
.1.3.6.1.2.1.16.2.2,RMON-MIB::etherHistoryTable,,not-accessible,,current,,A list of Ethernet history entries.
.1.3.6.1.2.1.16.2.2.1,RMON-MIB::etherHistoryEntry,,not-accessible,etherHistoryIndex:etherHistorySampleIndex,current,,An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the etherHistoryPkts object might be named etherHistoryPkts.2.89
.1.3.6.1.2.1.16.2.2.1.1,RMON-MIB::etherHistoryIndex,Integer32,read-only,,current,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.2.1.2,RMON-MIB::etherHistorySampleIndex,Integer32,read-only,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.2.1.3,RMON-MIB::etherHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.2.1.4,RMON-MIB::etherHistoryDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.2.1.5,RMON-MIB::etherHistoryOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.2.1.6,RMON-MIB::etherHistoryPkts,Counter32,read-only,,current,,The number of packets (including bad packets) received during this sampling interval.
.1.3.6.1.2.1.16.2.2.1.7,RMON-MIB::etherHistoryBroadcastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.8,RMON-MIB::etherHistoryMulticastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.9,RMON-MIB::etherHistoryCRCAlignErrors,Counter32,read-only,,current,,The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.2.2.1.10,RMON-MIB::etherHistoryUndersizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.11,RMON-MIB::etherHistoryOversizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.12,RMON-MIB::etherHistoryFragments,Counter32,read-only,,current,,The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherHistoryFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.2.2.1.13,RMON-MIB::etherHistoryJabbers,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.2.2.1.14,RMON-MIB::etherHistoryCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.2.2.1.15,RMON-MIB::etherHistoryUtilization,Integer32,read-only,,current,,The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
.1.3.6.1.2.1.16.2.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.2.3.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryEntry,,not-accessible,tokenRingMLHistoryIndex:tokenRingMLHistorySampleIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.3.1.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.3.1.2,TOKEN-RING-RMON-MIB::tokenRingMLHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular Mac-Layer sample this entry represents among all Mac-Layer samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.3.1.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.3.1.4,TOKEN-RING-RMON-MIB::tokenRingMLHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.3.1.5,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network during this sampling interval (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.3.1.6,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding those that were not good frames) received during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.7,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring entered the ring purge state from normal ring state during this sampling interval. The ring purge state that comes from the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.8,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgePkts,Counter32,read-only,,mandatory,,The total number of Ring Purge MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.9,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) during this sampling interval. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.2.3.1.10,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconTime,INTEGER,read-only,,mandatory,,The amount of time that the ring has been in the beaconing state during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.11,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.12,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state during this sampling interval. The claim token state that comes from the beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.13,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.14,TOKEN-RING-RMON-MIB::tokenRingMLHistoryNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.15,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.16,TOKEN-RING-RMON-MIB::tokenRingMLHistoryInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.17,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.18,TOKEN-RING-RMON-MIB::tokenRingMLHistoryACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.19,TOKEN-RING-RMON-MIB::tokenRingMLHistoryAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.20,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.21,TOKEN-RING-RMON-MIB::tokenRingMLHistoryCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.22,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.23,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.24,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.25,TOKEN-RING-RMON-MIB::tokenRingMLHistorySoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.26,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.27,TOKEN-RING-RMON-MIB::tokenRingMLHistoryActiveStations,INTEGER,read-only,,mandatory,,The maximum number of active stations on the ring detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.2.4.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryEntry,,not-accessible,tokenRingPHistoryIndex:tokenRingPHistorySampleIndex,mandatory,,A collection of promiscuous statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.4.1.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.4.1.2,TOKEN-RING-RMON-MIB::tokenRingPHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.4.1.3,TOKEN-RING-RMON-MIB::tokenRingPHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.4.1.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.4.1.5,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.6,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.7,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.2.4.1.8,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.2.4.1.9,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.10,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.11,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.12,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.13,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.14,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.15,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.16,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.17,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.18,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.5,RMON2-MIB::historyControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1,RMON2-MIB::historyControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1.1,RMON2-MIB::historyControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.3,RMON-MIB::alarm,,,,,,
.1.3.6.1.2.1.16.3.1,RMON-MIB::alarmTable,,not-accessible,,current,,A list of alarm entries.
.1.3.6.1.2.1.16.3.1.1,RMON-MIB::alarmEntry,,not-accessible,alarmIndex,current,,A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
.1.3.6.1.2.1.16.3.1.1.1,RMON-MIB::alarmIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
.1.3.6.1.2.1.16.3.1.1.2,RMON-MIB::alarmInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.3,RMON-MIB::alarmVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.4,RMON-MIB::alarmSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.5,RMON-MIB::alarmValue,Integer32,read-only,,current,,The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
.1.3.6.1.2.1.16.3.1.1.6,RMON-MIB::alarmStartupAlarm,INTEGER,read-create,,current,risingAlarm(1):fallingAlarm(2):risingOrFallingAlarm(3),The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.7,RMON-MIB::alarmRisingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.8,RMON-MIB::alarmFallingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.9,RMON-MIB::alarmRisingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.10,RMON-MIB::alarmFallingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.11,RMON-MIB::alarmOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.3.1.1.12,RMON-MIB::alarmStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this alarm entry.
.1.3.6.1.2.1.16.4,RMON-MIB::hosts,,,,,,
.1.3.6.1.2.1.16.4.1,RMON-MIB::hostControlTable,,not-accessible,,current,,A list of host table control entries.
.1.3.6.1.2.1.16.4.1.1,RMON-MIB::hostControlEntry,,not-accessible,hostControlIndex,current,,A list of parameters that set up the discovery of hosts on a particular interface and the collection of statistics about these hosts. For example, an instance of the hostControlTableSize object might be named hostControlTableSize.1
.1.3.6.1.2.1.16.4.1.1.1,RMON-MIB::hostControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostControl table. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the hostTable and the hostTimeTable on behalf of this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.2,RMON-MIB::hostControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for this instance of the host function. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated hostControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.4.1.1.3,RMON-MIB::hostControlTableSize,Integer32,read-only,,current,,The number of hostEntries in the hostTable and the hostTimeTable associated with this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.4,RMON-MIB::hostControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the hostTable associated with this hostControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.4.1.1.5,RMON-MIB::hostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.4.1.1.6,RMON-MIB::hostControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostControl entry. If this object is not equal to valid(1), all associated entries in the hostTable, hostTimeTable, and the hostTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.4.2,RMON-MIB::hostTable,,not-accessible,,current,,A list of host entries.
.1.3.6.1.2.1.16.4.2.1,RMON-MIB::hostEntry,,not-accessible,hostIndex:hostAddress,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. For example, an instance of the hostOutBroadcastPkts object might be named hostOutBroadcastPkts.1.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.4.2.1.1,RMON-MIB::hostAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.2.1.2,RMON-MIB::hostCreationOrder,Integer32,read-only,,current,,An index that defines the relative ordering of the creation time of hosts captured for a particular hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. It is important to note that the order for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTable. By observing this variable, the management station may detect the circumstances where a previous association between a value of hostCreationOrder and a hostEntry may no longer hold.
.1.3.6.1.2.1.16.4.2.1.3,RMON-MIB::hostIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.2.1.4,RMON-MIB::hostInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.5,RMON-MIB::hostOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.6,RMON-MIB::hostInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.7,RMON-MIB::hostOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.8,RMON-MIB::hostOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.9,RMON-MIB::hostOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.10,RMON-MIB::hostOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.3,RMON-MIB::hostTimeTable,,not-accessible,,current,,A list of time-ordered host table entries.
.1.3.6.1.2.1.16.4.3.1,RMON-MIB::hostTimeEntry,,not-accessible,hostTimeIndex:hostTimeCreationOrder,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. This collection includes the relative ordering of the creation time of this object. For example, an instance of the hostTimeOutBroadcastPkts object might be named hostTimeOutBroadcastPkts.1.687
.1.3.6.1.2.1.16.4.3.1.1,RMON-MIB::hostTimeAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.3.1.2,RMON-MIB::hostTimeCreationOrder,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. Thus the management station has the ability to learn of new entries added to this table without downloading the entire table. It is important to note that the index for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTimeTable. By observing this variable, the management station may detect the circumstances where a download of the table may have missed entries, and where a previous association between a value of hostTimeCreationOrder and a hostTimeEntry may no longer hold.
.1.3.6.1.2.1.16.4.3.1.3,RMON-MIB::hostTimeIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.3.1.4,RMON-MIB::hostTimeInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.5,RMON-MIB::hostTimeOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.6,RMON-MIB::hostTimeInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.7,RMON-MIB::hostTimeOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.8,RMON-MIB::hostTimeOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.9,RMON-MIB::hostTimeOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.10,RMON-MIB::hostTimeOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTimeTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.4,RMON2-MIB::hostControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1,RMON2-MIB::hostControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1.1,RMON2-MIB::hostControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.4.4.1.2,RMON2-MIB::hostControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.5,RMON-MIB::hostTopN,,,,,,
.1.3.6.1.2.1.16.5.1,RMON-MIB::hostTopNControlTable,,not-accessible,,current,,A list of top N host control entries.
.1.3.6.1.2.1.16.5.1.1,RMON-MIB::hostTopNControlEntry,,not-accessible,hostTopNControlIndex,current,,A set of parameters that control the creation of a report of the top N hosts according to several metrics. For example, an instance of the hostTopNDuration object might be named hostTopNDuration.3
.1.3.6.1.2.1.16.5.1.1.1,RMON-MIB::hostTopNControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopNControl table. Each such entry defines one top N report prepared for one interface.
.1.3.6.1.2.1.16.5.1.1.2,RMON-MIB::hostTopNHostIndex,Integer32,read-create,,current,,The host table for which a top N report will be prepared on behalf of this entry. The host table identified by a particular value of this index is associated with the same host table as identified by the same value of hostIndex. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.3,RMON-MIB::hostTopNRateBase,INTEGER,read-create,,current,hostTopNInPkts(1):hostTopNOutPkts(2):hostTopNInOctets(3):hostTopNOutOctets(4):hostTopNOutErrors(5):hostTopNOutBroadcastPkts(6):hostTopNOutMulticastPkts(7),The variable for each host that the hostTopNRate variable is based upon. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.4,RMON-MIB::hostTopNTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval.
.1.3.6.1.2.1.16.5.1.1.5,RMON-MIB::hostTopNDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval, or if this report is currently being collected, the number of seconds that this report is being collected during this sampling interval. When the associated hostTopNTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the hostTopNTimeRemaining is set. This value shall be zero if no reports have been requested for this hostTopNControlEntry.
.1.3.6.1.2.1.16.5.1.1.6,RMON-MIB::hostTopNRequestedSize,Integer32,read-create,,current,,The maximum number of hosts requested for the top N table. When this object is created or modified, the probe should set hostTopNGrantedSize as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.5.1.1.7,RMON-MIB::hostTopNGrantedSize,Integer32,read-only,,current,,The maximum number of hosts in the top N table. When the associated hostTopNRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe must not lower this value except as a result of a set to the associated hostTopNRequestedSize object. Hosts with the highest value of hostTopNRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more hosts.
.1.3.6.1.2.1.16.5.1.1.8,RMON-MIB::hostTopNStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated hostTopNTimeRemaining object was modified to start the requested report.
.1.3.6.1.2.1.16.5.1.1.9,RMON-MIB::hostTopNOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.5.1.1.10,RMON-MIB::hostTopNStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostTopNControl entry. If this object is not equal to valid(1), all associated hostTopNEntries shall be deleted by the agent.
.1.3.6.1.2.1.16.5.2,RMON-MIB::hostTopNTable,,not-accessible,,current,,A list of top N host entries.
.1.3.6.1.2.1.16.5.2.1,RMON-MIB::hostTopNEntry,,not-accessible,hostTopNReport:hostTopNIndex,current,,A set of statistics for a host that is part of a top N report. For example, an instance of the hostTopNRate object might be named hostTopNRate.3.10
.1.3.6.1.2.1.16.5.2.1.1,RMON-MIB::hostTopNReport,Integer32,read-only,,current,,This object identifies the top N report of which this entry is a part. The set of hosts identified by a particular value of this object is part of the same report as identified by the same value of the hostTopNControlIndex object.
.1.3.6.1.2.1.16.5.2.1.2,RMON-MIB::hostTopNIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopN table among those in the same report. This index is between 1 and N, where N is the number of entries in this table. Increasing values of hostTopNIndex shall be assigned to entries with decreasing values of hostTopNRate until index N is assigned to the entry with the lowest value of hostTopNRate or there are no more hostTopNEntries.
.1.3.6.1.2.1.16.5.2.1.3,RMON-MIB::hostTopNAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.5.2.1.4,RMON-MIB::hostTopNRate,Integer32,read-only,,current,,The amount of change in the selected variable during this sampling interval. The selected variable is this host's instance of the object selected by hostTopNRateBase.
.1.3.6.1.2.1.16.6,RMON-MIB::matrix,,,,,,
.1.3.6.1.2.1.16.6.1,RMON-MIB::matrixControlTable,,not-accessible,,current,,A list of information entries for the traffic matrix on each interface.
.1.3.6.1.2.1.16.6.1.1,RMON-MIB::matrixControlEntry,,not-accessible,matrixControlIndex,current,,Information about a traffic matrix on a particular interface. For example, an instance of the matrixControlLastDeleteTime object might be named matrixControlLastDeleteTime.1
.1.3.6.1.2.1.16.6.1.1.1,RMON-MIB::matrixControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the matrixControl table. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the matrixSDTable and the matrixDSTable on behalf of this matrixControlEntry.
.1.3.6.1.2.1.16.6.1.1.2,RMON-MIB::matrixControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data from which this entry creates a traffic matrix. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated matrixControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.6.1.1.3,RMON-MIB::matrixControlTableSize,Integer32,read-only,,current,,The number of matrixSDEntries in the matrixSDTable for this interface. This must also be the value of the number of entries in the matrixDSTable for this interface.
.1.3.6.1.2.1.16.6.1.1.4,RMON-MIB::matrixControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the matrixSDTable or matrixDSTable associated with this matrixControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.6.1.1.5,RMON-MIB::matrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.6.1.1.6,RMON-MIB::matrixControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this matrixControl entry. If this object is not equal to valid(1), all associated entries in the matrixSDTable and the matrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.6.2,RMON-MIB::matrixSDTable,,not-accessible,,current,,A list of traffic matrix entries indexed by source and destination MAC address.
.1.3.6.1.2.1.16.6.2.1,RMON-MIB::matrixSDEntry,,not-accessible,matrixSDIndex:matrixSDSourceAddress:matrixSDDestAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113
.1.3.6.1.2.1.16.6.2.1.1,RMON-MIB::matrixSDSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.2.1.2,RMON-MIB::matrixSDDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.2.1.3,RMON-MIB::matrixSDIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.2.1.4,RMON-MIB::matrixSDPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.2.1.5,RMON-MIB::matrixSDOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.2.1.6,RMON-MIB::matrixSDErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3,RMON-MIB::matrixDSTable,,not-accessible,,current,,A list of traffic matrix entries indexed by destination and source MAC address.
.1.3.6.1.2.1.16.6.3.1,RMON-MIB::matrixDSEntry,,not-accessible,matrixDSIndex:matrixDSDestAddress:matrixDSSourceAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.6.3.1.1,RMON-MIB::matrixDSSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.3.1.2,RMON-MIB::matrixDSDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.3.1.3,RMON-MIB::matrixDSIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.3.1.4,RMON-MIB::matrixDSPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.3.1.5,RMON-MIB::matrixDSOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3.1.6,RMON-MIB::matrixDSErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.4,RMON2-MIB::matrixControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1,RMON2-MIB::matrixControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1.1,RMON2-MIB::matrixControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.6.4.1.2,RMON2-MIB::matrixControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7,RMON-MIB::filter,,,,,,
.1.3.6.1.2.1.16.7.1,RMON-MIB::filterTable,,not-accessible,,current,,A list of packet filter entries.
.1.3.6.1.2.1.16.7.1.1,RMON-MIB::filterEntry,,not-accessible,filterIndex,current,,A set of parameters for a packet filter applied on a particular interface. As an example, an instance of the filterPktData object might be named filterPktData.12
.1.3.6.1.2.1.16.7.1.1.1,RMON-MIB::filterIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to every packet received on an interface.
.1.3.6.1.2.1.16.7.1.1.2,RMON-MIB::filterChannelIndex,Integer32,read-create,,current,,This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object are associated with the same channel as identified by the same value of the channelIndex object.
.1.3.6.1.2.1.16.7.1.1.3,RMON-MIB::filterPktDataOffset,Integer32,read-create,,current,,The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the point in the physical layer packet after the framing bits, if any. For example, in an Ethernet frame, this point is at the beginning of the destination MAC address. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.4,RMON-MIB::filterPktData,OCTET,read-create,,current,,The data that is to be matched with the input packet. For each packet received, this filter and the accompanying filterPktDataMask and filterPktDataNotMask will be adjusted for the offset. The only bits relevant to this match algorithm are those that have the corresponding filterPktDataMask bit equal to one. The following three rules are then applied to every packet: (1) If the packet is too short and does not have data corresponding to part of the filterPktData, the packet will fail this data match. (2) For each relevant bit from the packet with the corresponding filterPktDataNotMask bit set to zero, if the bit from the packet is not equal to the corresponding bit from the filterPktData, then the packet will fail this data match. (3) If for every relevant bit from the packet with the corresponding filterPktDataNotMask bit set to one, the bit from the packet is equal to the corresponding bit from the filterPktData, then the packet will fail this data match. Any packets that have not failed any of the three matches above have passed this data match. In particular, a zero length filter will match any packet. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.5,RMON-MIB::filterPktDataMask,OCTET,read-create,,current,,The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the match algorithm. The offset is applied to filterPktDataMask in the same way it is applied to the filter. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.6,RMON-MIB::filterPktDataNotMask,OCTET,read-create,,current,,The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the received packet that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktData object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet that correspond to bits set in this mask must be different to its corresponding bit in the filterPktData object. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.7,RMON-MIB::filterPktStatus,Integer32,read-create,,current,,The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the corresponding filterPktStatusMask bit equal to one. The following two rules are then applied to every packet: (1) For each relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to zero, if the bit from the packet status is not equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. (2) If for every relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to one, the bit from the packet status is equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. Any packets that have not failed either of the two matches above have passed this status match. In particular, a zero length status filter will match any packet's status. The value of the packet status is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors and the bits that represent them are dependent on the media type of the interface that this channel is receiving packets from. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined. For the purposes of this status matching algorithm, if the packet status is longer than this filterPktStatus object, this object is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.8,RMON-MIB::filterPktStatusMask,Integer32,read-create,,current,,The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the status match algorithm. For the purposes of the matching algorithm, if the associated filterPktStatus object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the size of the filterPktStatus. In addition, if a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.9,RMON-MIB::filterPktStatusNotMask,Integer32,read-create,,current,,The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.10,RMON-MIB::filterOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.1.1.11,RMON-MIB::filterStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this filter entry.
.1.3.6.1.2.1.16.7.2,RMON-MIB::channelTable,,not-accessible,,current,,A list of packet channel entries.
.1.3.6.1.2.1.16.7.2.1,RMON-MIB::channelEntry,,not-accessible,channelIndex,current,,A set of parameters for a packet channel applied on a particular interface. As an example, an instance of the channelMatches object might be named channelMatches.3
.1.3.6.1.2.1.16.7.2.1.1,RMON-MIB::channelIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event stream. It is suggested that before creating a channel, an application should scan all instances of the filterChannelIndex object to make sure that there are no pre-existing filters that would be inadvertently be linked to the channel.
.1.3.6.1.2.1.16.7.2.1.2,RMON-MIB::channelIfIndex,Integer32,read-create,,current,,The value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.3,RMON-MIB::channelAcceptType,INTEGER,read-create,,current,acceptMatched(1):acceptFailed(2),This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. In particular, a channel with no associated filters will match no packets if set to acceptMatched(1) case and will match all packets in the acceptFailed(2) case. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.4,RMON-MIB::channelDataControl,INTEGER,read-create,,current,on(1):off(2),This object controls the flow of data through this channel. If this object is on(1), data, status and events flow through this channel. If this object is off(2), data, status and events will not flow through this channel.
.1.3.6.1.2.1.16.7.2.1.5,RMON-MIB::channelTurnOnEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from off to on when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOnEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.6,RMON-MIB::channelTurnOffEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from on to off when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOffEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.7,RMON-MIB::channelEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to be generated when the associated channelDataControl is on and a packet is matched. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.8,RMON-MIB::channelEventStatus,INTEGER,read-create,,current,eventReady(1):eventFired(2):eventAlwaysReady(3),The event status of this channel. If this channel is configured to generate events when packets are matched, a means of controlling the flow of those events is often needed. When this object is equal to eventReady(1), a single event may be generated, after which this object will be set by the probe to eventFired(2). While in the eventFired(2) state, no events will be generated until the object is modified to eventReady(1) (or eventAlwaysReady(3)). The management station can thus easily respond to a notification of an event by re-enabling this object. If the management station wishes to disable this flow control and allow events to be generated at will, this object may be set to eventAlwaysReady(3). Disabling the flow control is discouraged as it can result in high network traffic or other performance problems.
.1.3.6.1.2.1.16.7.2.1.9,RMON-MIB::channelMatches,Counter32,read-only,,current,,The number of times this channel has matched a packet. Note that this object is updated even when channelDataControl is set to off.
.1.3.6.1.2.1.16.7.2.1.10,RMON-MIB::channelDescription,OCTET,read-create,,current,,A comment describing this channel.
.1.3.6.1.2.1.16.7.2.1.11,RMON-MIB::channelOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.2.1.12,RMON-MIB::channelStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this channel entry.
.1.3.6.1.2.1.16.7.3,RMON2-MIB::channel2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1,RMON2-MIB::channel2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1.1,RMON2-MIB::channelDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.7.3.1.2,RMON2-MIB::channelCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7.4,RMON2-MIB::filter2Table,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1,RMON2-MIB::filter2Entry,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1.1,RMON2-MIB::filterProtocolDirDataLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with performs the following operations on every packet: 1) If the packet doesn't match the protocol directory entry identified by this object, discard the packet and exit (i.e., discard the packet if it is not of the identified protocol). 2) If the associated filterProtocolDirLocalIndex is non-zero and the packet doesn't match the protocol directory entry identified by that object, discard the packet and exit. 3) If the packet matches, perform the regular filter algorithm as if the beginning of this named protocol is the beginning of the packet, potentially applying the filterOffset value to move further into the packet.
.1.3.6.1.2.1.16.7.4.1.2,RMON2-MIB::filterProtocolDirLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with will discard the packet if the packet doesn't match this protocol directory entry.
.1.3.6.1.2.1.16.8,RMON-MIB::capture,,,,,,
.1.3.6.1.2.1.16.8.1,RMON-MIB::bufferControlTable,,not-accessible,,current,,A list of buffers control entries.
.1.3.6.1.2.1.16.8.1.1,RMON-MIB::bufferControlEntry,,not-accessible,bufferControlIndex,current,,A set of parameters that control the collection of a stream of packets that have matched filters. As an example, an instance of the bufferControlCaptureSliceSize object might be named bufferControlCaptureSliceSize.3
.1.3.6.1.2.1.16.8.1.1.1,RMON-MIB::bufferControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the bufferControl table. The value of this index shall never be zero. Each such entry defines one set of packets that is captured and controlled by one or more filters.
.1.3.6.1.2.1.16.8.1.1.2,RMON-MIB::bufferControlChannelIndex,Integer32,read-create,,current,,An index that identifies the channel that is the source of packets for this bufferControl table. The channel identified by a particular value of this index is the same as identified by the same value of the channelIndex object. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.3,RMON-MIB::bufferControlFullStatus,INTEGER,read-only,,current,spaceAvailable(1):full(2),This object shows whether the buffer has room to accept new packets or if it is full. If the status is spaceAvailable(1), the buffer is accepting new packets normally. If the status is full(2) and the associated bufferControlFullAction object is wrapWhenFull, the buffer is accepting new packets by deleting enough of the oldest packets to make room for new ones as they arrive. Otherwise, if the status is full(2) and the bufferControlFullAction object is lockWhenFull, then the buffer has stopped collecting packets. When this object is set to full(2) the probe must not later set it to spaceAvailable(1) except in the case of a significant gain in resources such as an increase of bufferControlOctetsGranted. In particular, the wrap-mode action of deleting old packets to make room for newly arrived packets must not affect the value of this object.
.1.3.6.1.2.1.16.8.1.1.4,RMON-MIB::bufferControlFullAction,INTEGER,read-create,,current,lockWhenFull(1):wrapWhenFull(2),Controls the action of the buffer when it reaches the full status. When in the lockWhenFull(1) state and a packet is added to the buffer that fills the buffer, the bufferControlFullStatus will be set to full(2) and this buffer will stop capturing packets.
.1.3.6.1.2.1.16.8.1.1.5,RMON-MIB::bufferControlCaptureSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet that will be saved in this capture buffer. For example, if a 1500 octet packet is received by the probe and this object is set to 500, then only 500 octets of the packet will be stored in the associated capture buffer. If this variable is set to 0, the capture buffer will save as many octets as is possible. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.6,RMON-MIB::bufferControlDownloadSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer, the associated bufferControlDownloadOffset is 0, and this object is set to 100, then the captureBufferPacket object that contains the packet will contain only the first 100 octets of the packet. A prudent manager will take into account possible interoperability or fragmentation problems that may occur if the download slice size is set too large. In particular, conformant SNMP implementations are not required to accept messages whose length exceeds 484 octets, although they are encouraged to support larger datagrams whenever feasible.
.1.3.6.1.2.1.16.8.1.1.7,RMON-MIB::bufferControlDownloadOffset,Integer32,read-create,,current,,The offset of the first octet of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer and this object is set to 100, then the captureBufferPacket object that contains the packet will contain bytes starting 100 octets into the packet.
.1.3.6.1.2.1.16.8.1.1.8,RMON-MIB::bufferControlMaxOctetsRequested,Integer32,read-create,,current,,The requested maximum number of octets to be saved in this captureBuffer, including any implementation-specific overhead. If this variable is set to -1, the capture buffer will save as many octets as is possible. When this object is created or modified, the probe should set bufferControlMaxOctetsGranted as closely to this object as is possible for the particular probe implementation and available resources. However, if the object has the special value of -1, the probe must set bufferControlMaxOctetsGranted to -1.
.1.3.6.1.2.1.16.8.1.1.9,RMON-MIB::bufferControlMaxOctetsGranted,Integer32,read-only,,current,,The maximum number of octets that can be saved in this captureBuffer, including overhead. If this variable is -1, the capture buffer will save as many octets as possible. When the bufferControlMaxOctetsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. However, if the request object has the special value of -1, the probe must set this object to -1. The probe must not lower this value except as a result of a modification to the associated bufferControlMaxOctetsRequested object. When this maximum number of octets is reached and a new packet is to be added to this capture buffer and the corresponding bufferControlFullAction is set to wrapWhenFull(2), enough of the oldest packets associated with this capture buffer shall be deleted by the agent so that the new packet can be added. If the corresponding bufferControlFullAction is set to lockWhenFull(1), the new packet shall be discarded. In either case, the probe must set bufferControlFullStatus to full(2). When the value of this object changes to a value less than the current value, entries are deleted from the captureBufferTable associated with this bufferControlEntry. Enough of the oldest of these captureBufferEntries shall be deleted by the agent so that the number of octets used remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated captureBufferEntries may be allowed to grow.
.1.3.6.1.2.1.16.8.1.1.10,RMON-MIB::bufferControlCapturedPackets,Integer32,read-only,,current,,The number of packets currently in this captureBuffer.
.1.3.6.1.2.1.16.8.1.1.11,RMON-MIB::bufferControlTurnOnTime,TimeTicks,read-only,,current,,The value of sysUpTime when this capture buffer was first turned on.
.1.3.6.1.2.1.16.8.1.1.12,RMON-MIB::bufferControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.8.1.1.13,RMON-MIB::bufferControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this buffer Control Entry.
.1.3.6.1.2.1.16.8.2,RMON-MIB::captureBufferTable,,not-accessible,,current,,A list of packets captured off of a channel.
.1.3.6.1.2.1.16.8.2.1,RMON-MIB::captureBufferEntry,,not-accessible,captureBufferControlIndex:captureBufferIndex,current,,A packet captured off of an attached network. As an example, an instance of the captureBufferPacketData object might be named captureBufferPacketData.3.1783
.1.3.6.1.2.1.16.8.2.1.1,RMON-MIB::captureBufferControlIndex,Integer32,read-only,,current,,The index of the bufferControlEntry with which this packet is associated.
.1.3.6.1.2.1.16.8.2.1.2,RMON-MIB::captureBufferIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the captureBuffer table associated with a particular bufferControlEntry. This index will start at 1 and increase by one for each new packet added with the same captureBufferControlIndex. Should this value reach 2147483647, the next packet added with the same captureBufferControlIndex shall cause this value to wrap around to 1.
.1.3.6.1.2.1.16.8.2.1.3,RMON-MIB::captureBufferPacketID,Integer32,read-only,,current,,An index that describes the order of packets that are received on a particular interface. The packetID of a packet captured on an interface is defined to be greater than the packetID's of all packets captured previously on the same interface. As the captureBufferPacketID object has a maximum positive value of 2^31 - 1, any captureBufferPacketID object shall have the value of the associated packet's packetID mod 2^31.
.1.3.6.1.2.1.16.8.2.1.4,RMON-MIB::captureBufferPacketData,OCTET,read-only,,current,,The data inside the packet, starting at the beginning of the packet plus any offset specified in the associated bufferControlDownloadOffset, including any link level headers. The length of the data in this object is the minimum of the length of the captured packet minus the offset, the length of the associated bufferControlCaptureSliceSize minus the offset, and the associated bufferControlDownloadSliceSize. If this minimum is less than zero, this object shall have a length of zero.
.1.3.6.1.2.1.16.8.2.1.5,RMON-MIB::captureBufferPacketLength,Integer32,read-only,,current,,The actual length (off the wire) of the packet stored in this entry, including FCS octets.
.1.3.6.1.2.1.16.8.2.1.6,RMON-MIB::captureBufferPacketTime,Integer32,read-only,,current,,The number of milliseconds that had passed since this capture buffer was first turned on when this packet was captured.
.1.3.6.1.2.1.16.8.2.1.7,RMON-MIB::captureBufferPacketStatus,Integer32,read-only,,current,,A value which indicates the error status of this packet. The value of this object is defined in the same way as filterPktStatus. The value is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error 3 First packet in this capture buffer after it was detected that some packets were not processed correctly. 4 Packet's order in buffer is only approximate (May only be set for packets sent from the probe) For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined.
.1.3.6.1.2.1.16.9,RMON-MIB::event,,,,,,
.1.3.6.1.2.1.16.9.1,RMON-MIB::eventTable,,not-accessible,,current,,A list of events to be generated.
.1.3.6.1.2.1.16.9.1.1,RMON-MIB::eventEntry,,not-accessible,eventIndex,current,,A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be named eventLastTimeSent.6
.1.3.6.1.2.1.16.9.1.1.1,RMON-MIB::eventIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
.1.3.6.1.2.1.16.9.1.1.2,RMON-MIB::eventDescription,OCTET,read-create,,current,,A comment describing this event entry.
.1.3.6.1.2.1.16.9.1.1.3,RMON-MIB::eventType,INTEGER,read-create,,current,none(1):log(2):snmptrap(3):logandtrap(4),The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.
.1.3.6.1.2.1.16.9.1.1.4,RMON-MIB::eventCommunity,OCTET,read-create,,current,,If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.
.1.3.6.1.2.1.16.9.1.1.5,RMON-MIB::eventLastTimeSent,TimeTicks,read-only,,current,,The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
.1.3.6.1.2.1.16.9.1.1.6,RMON-MIB::eventOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
.1.3.6.1.2.1.16.9.1.1.7,RMON-MIB::eventStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
.1.3.6.1.2.1.16.9.2,RMON-MIB::logTable,,not-accessible,,current,,A list of events that have been logged.
.1.3.6.1.2.1.16.9.2.1,RMON-MIB::logEntry,,not-accessible,logEventIndex:logIndex,current,,A set of data describing an event that has been logged. For example, an instance of the logDescription object might be named logDescription.6.47
.1.3.6.1.2.1.16.9.2.1.1,RMON-MIB::logEventIndex,Integer32,read-only,,current,,The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.
.1.3.6.1.2.1.16.9.2.1.2,RMON-MIB::logIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur.
.1.3.6.1.2.1.16.9.2.1.3,RMON-MIB::logTime,TimeTicks,read-only,,current,,The value of sysUpTime when this log entry was created.
.1.3.6.1.2.1.16.9.2.1.4,RMON-MIB::logDescription,OCTET,read-only,,current,,An implementation dependent description of the event that activated this log entry.
.1.3.6.1.2.1.16.10,TOKEN-RING-RMON-MIB::tokenRing,,,,,,
.1.3.6.1.2.1.16.10.1,TOKEN-RING-RMON-MIB::ringStationControlTable,,not-accessible,,mandatory,,A list of ringStation table control entries.
.1.3.6.1.2.1.16.10.1.1,TOKEN-RING-RMON-MIB::ringStationControlEntry,,not-accessible,ringStationControlIfIndex,mandatory,,A list of parameters that set up the discovery of stations on a particular interface and the collection of statistics about these stations.
.1.3.6.1.2.1.16.10.1.1.1,TOKEN-RING-RMON-MIB::ringStationControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device from which ringStation data is collected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB- II [3].
.1.3.6.1.2.1.16.10.1.1.2,TOKEN-RING-RMON-MIB::ringStationControlTableSize,INTEGER,read-only,,mandatory,,The number of ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.3,TOKEN-RING-RMON-MIB::ringStationControlActiveStations,INTEGER,read-only,,mandatory,,The number of active ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.4,TOKEN-RING-RMON-MIB::ringStationControlRingState,INTEGER,read-only,,mandatory,normalOperation(1):ringPurgeState(2):claimTokenState(3):beaconFrameStreamingState(4):beaconBitStreamingState(5):beaconRingSignalLossState(6):beaconSetRecoveryModeState(7),The current status of this ring.
.1.3.6.1.2.1.16.10.1.1.5,TOKEN-RING-RMON-MIB::ringStationControlBeaconSender,OCTET,read-only,,mandatory,,The address of the sender of the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.6,TOKEN-RING-RMON-MIB::ringStationControlBeaconNAUN,OCTET,read-only,,mandatory,,The address of the NAUN in the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.7,TOKEN-RING-RMON-MIB::ringStationControlActiveMonitor,OCTET,read-only,,mandatory,,The address of the Active Monitor on this segment. If this address is unknown, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.8,TOKEN-RING-RMON-MIB::ringStationControlOrderChanges,Counter32,read-only,,mandatory,,The number of add and delete events in the ringStationOrderTable optionally associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.9,TOKEN-RING-RMON-MIB::ringStationControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.1.1.10,TOKEN-RING-RMON-MIB::ringStationControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this ringStationControl entry. If this object is not equal to valid(1), all associated entries in the ringStationTable shall be deleted by the agent.
.1.3.6.1.2.1.16.10.2,TOKEN-RING-RMON-MIB::ringStationTable,,not-accessible,,mandatory,,A list of ring station entries. An entry will exist for each station that is now or has previously been detected as physically present on this ring.
.1.3.6.1.2.1.16.10.2.1,TOKEN-RING-RMON-MIB::ringStationEntry,,not-accessible,ringStationIfIndex:ringStationMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this device.
.1.3.6.1.2.1.16.10.2.1.1,TOKEN-RING-RMON-MIB::ringStationIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.2.1.2,TOKEN-RING-RMON-MIB::ringStationMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.2.1.3,TOKEN-RING-RMON-MIB::ringStationLastNAUN,OCTET,read-only,,mandatory,,The physical address of last known NAUN of this station.
.1.3.6.1.2.1.16.10.2.1.4,TOKEN-RING-RMON-MIB::ringStationStationStatus,INTEGER,read-only,,mandatory,active(1):inactive(2):forcedRemoval(3),The status of this station on the ring.
.1.3.6.1.2.1.16.10.2.1.5,TOKEN-RING-RMON-MIB::ringStationLastEnterTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this station last entered the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.6,TOKEN-RING-RMON-MIB::ringStationLastExitTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the probe detected that this station last exited the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.7,TOKEN-RING-RMON-MIB::ringStationDuplicateAddresses,Counter32,read-only,,mandatory,,The number of times this station experienced a duplicate address error.
.1.3.6.1.2.1.16.10.2.1.8,TOKEN-RING-RMON-MIB::ringStationInLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.9,TOKEN-RING-RMON-MIB::ringStationOutLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.10,TOKEN-RING-RMON-MIB::ringStationInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.11,TOKEN-RING-RMON-MIB::ringStationInBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.12,TOKEN-RING-RMON-MIB::ringStationOutBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.13,TOKEN-RING-RMON-MIB::ringStationACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.14,TOKEN-RING-RMON-MIB::ringStationAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.15,TOKEN-RING-RMON-MIB::ringStationLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.16,TOKEN-RING-RMON-MIB::ringStationCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.17,TOKEN-RING-RMON-MIB::ringStationFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.18,TOKEN-RING-RMON-MIB::ringStationFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.19,TOKEN-RING-RMON-MIB::ringStationTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported by this station in error reporting frames detected by the probe.
.1.3.6.1.2.1.16.10.2.1.20,TOKEN-RING-RMON-MIB::ringStationInBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames sent by this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.21,TOKEN-RING-RMON-MIB::ringStationOutBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames detected by the probe that name this station as the NAUN.
.1.3.6.1.2.1.16.10.2.1.22,TOKEN-RING-RMON-MIB::ringStationInsertions,Counter32,read-only,,mandatory,,The number of times the probe detected this station inserting onto the ring.
.1.3.6.1.2.1.16.10.3,TOKEN-RING-RMON-MIB::ringStationOrderTable,,not-accessible,,mandatory,,A list of ring station entries for stations in the ring poll, ordered by their ring-order.
.1.3.6.1.2.1.16.10.3.1,TOKEN-RING-RMON-MIB::ringStationOrderEntry,,not-accessible,ringStationOrderIfIndex:ringStationOrderOrderIndex,mandatory,,A collection of statistics for a particular station that is active on a ring monitored by this device. This table will contain information for every interface that has a ringStationControlStatus equal to valid.
.1.3.6.1.2.1.16.10.3.1.1,TOKEN-RING-RMON-MIB::ringStationOrderIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.3.1.2,TOKEN-RING-RMON-MIB::ringStationOrderOrderIndex,INTEGER,read-only,,mandatory,,This index denotes the location of this station with respect to other stations on the ring. This index is one more than the number of hops downstream that this station is from the rmon probe. The rmon probe itself gets the value one.
.1.3.6.1.2.1.16.10.3.1.3,TOKEN-RING-RMON-MIB::ringStationOrderMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4,TOKEN-RING-RMON-MIB::ringStationConfigControlTable,,not-accessible,,mandatory,,A list of ring station configuration control entries.
.1.3.6.1.2.1.16.10.4.1,TOKEN-RING-RMON-MIB::ringStationConfigControlEntry,,not-accessible,ringStationConfigControlIfIndex:ringStationConfigControlMacAddress,mandatory,,This entry controls active management of stations by the probe. One entry exists in this table for each active station in the ringStationTable.
.1.3.6.1.2.1.16.10.4.1.1,TOKEN-RING-RMON-MIB::ringStationConfigControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.4.1.2,TOKEN-RING-RMON-MIB::ringStationConfigControlMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4.1.3,TOKEN-RING-RMON-MIB::ringStationConfigControlRemove,INTEGER,read-write,,mandatory,stable(1):removing(2),Setting this object to `removing(2)' causes a Remove Station MAC frame to be sent. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.4.1.4,TOKEN-RING-RMON-MIB::ringStationConfigControlUpdateStats,INTEGER,read-write,,mandatory,stable(1):updating(2),Setting this object to `updating(2)' causes the configuration information associate with this entry to be updated. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.5,TOKEN-RING-RMON-MIB::ringStationConfigTable,,not-accessible,,mandatory,,A list of configuration entries for stations on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1,TOKEN-RING-RMON-MIB::ringStationConfigEntry,,not-accessible,ringStationConfigIfIndex:ringStationConfigMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1.1,TOKEN-RING-RMON-MIB::ringStationConfigIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.5.1.2,TOKEN-RING-RMON-MIB::ringStationConfigMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.5.1.3,TOKEN-RING-RMON-MIB::ringStationConfigUpdateTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this configuration information was last updated (completely).
.1.3.6.1.2.1.16.10.5.1.4,TOKEN-RING-RMON-MIB::ringStationConfigLocation,OCTET,read-only,,mandatory,,The assigned physical location of this station.
.1.3.6.1.2.1.16.10.5.1.5,TOKEN-RING-RMON-MIB::ringStationConfigMicrocode,OCTET,read-only,,mandatory,,The microcode EC level of this station.
.1.3.6.1.2.1.16.10.5.1.6,TOKEN-RING-RMON-MIB::ringStationConfigGroupAddress,OCTET,read-only,,mandatory,,The low-order 4 octets of the group address recognized by this station.
.1.3.6.1.2.1.16.10.5.1.7,TOKEN-RING-RMON-MIB::ringStationConfigFunctionalAddress,OCTET,read-only,,mandatory,,the functional addresses recognized by this station.
.1.3.6.1.2.1.16.10.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsTable,,not-accessible,,mandatory,,A list of source routing statistics entries.
.1.3.6.1.2.1.16.10.6.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsEntry,,not-accessible,sourceRoutingStatsIfIndex,mandatory,,A collection of source routing statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.10.6.1.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which source routing statistics will be detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.6.1.2,TOKEN-RING-RMON-MIB::sourceRoutingStatsRingNumber,INTEGER,read-only,,mandatory,,The ring number of the ring monitored by this entry. When any object in this entry is created, the probe will attempt to discover the ring number. Only after the ring number is discovered will this object be created. After creating an object in this entry, the management station should poll this object to detect when it is created. Only after this object is created can the management station set the sourceRoutingStatsStatus entry to valid(1).
.1.3.6.1.2.1.16.10.6.1.3,TOKEN-RING-RMON-MIB::sourceRoutingStatsInFrames,Counter32,read-only,,mandatory,,The count of frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.4,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutFrames,Counter32,read-only,,mandatory,,The count of frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.5,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughFrames,Counter32,read-only,,mandatory,,The count of frames sent from another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.7,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRouteBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.8,TOKEN-RING-RMON-MIB::sourceRoutingStatsInOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.9,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.10,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.11,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.12,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.13,TOKEN-RING-RMON-MIB::sourceRoutingStatsLocalLLCFrames,Counter32,read-only,,mandatory,,The total number of frames received who had no RIF field (or had a RIF field that only included the local ring's number) and were not All Route Broadcast Frames.
.1.3.6.1.2.1.16.10.6.1.14,TOKEN-RING-RMON-MIB::sourceRoutingStats1HopFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 1 hop, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.15,TOKEN-RING-RMON-MIB::sourceRoutingStats2HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 2 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.16,TOKEN-RING-RMON-MIB::sourceRoutingStats3HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 3 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.17,TOKEN-RING-RMON-MIB::sourceRoutingStats4HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 4 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.18,TOKEN-RING-RMON-MIB::sourceRoutingStats5HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 5 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.19,TOKEN-RING-RMON-MIB::sourceRoutingStats6HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 6 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.20,TOKEN-RING-RMON-MIB::sourceRoutingStats7HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 7 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.21,TOKEN-RING-RMON-MIB::sourceRoutingStats8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.22,TOKEN-RING-RMON-MIB::sourceRoutingStatsMoreThan8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had more than 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.23,TOKEN-RING-RMON-MIB::sourceRoutingStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.6.1.24,TOKEN-RING-RMON-MIB::sourceRoutingStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this sourceRoutingStats entry.
.1.3.6.1.2.1.16.10.7,RMON2-MIB::ringStationControl2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.7.1,RMON2-MIB::ringStationControl2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.7.1.1,RMON2-MIB::ringStationControlDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.7.1.2,RMON2-MIB::ringStationControlCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.10.8,RMON2-MIB::sourceRoutingStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.8.1,RMON2-MIB::sourceRoutingStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.8.1.1,RMON2-MIB::sourceRoutingStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.8.1.2,RMON2-MIB::sourceRoutingStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.11,RMON2-MIB::protocolDir,,,,,,
.1.3.6.1.2.1.16.11.1,RMON2-MIB::protocolDirLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time the protocol directory was last modified, either through insertions or deletions, or through modifications of the protocolDirAddressMapConfig, protocolDirHostConfig, or protocolDirMatrixConfig.
.1.3.6.1.2.1.16.11.2,RMON2-MIB::protocolDirTable,,not-accessible,,current,,This table lists the protocols that this agent has the capability to decode and count. There is one entry in this table for each such protocol. These protocols represent different network-layer, transport-layer, and higher-layer protocols. The agent should boot up with this table preconfigured with those protocols that it knows about and wishes to monitor. Implementations are strongly encouraged to support protocols higher than the network layer (at least for the protocol distribution group), even for implementations that don't support the application-layer groups.
.1.3.6.1.2.1.16.11.2.1,RMON2-MIB::protocolDirEntry,,not-accessible,protocolDirID:protocolDirParameters,current,,A conceptual row in the protocolDirTable. An example of the indexing of this entry is protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the encoding of a length of 8, followed by 8 subids encoding the protocolDirID of 1.2048, followed by a length of 2 and the 2 subids encoding zero-valued parameters. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.11.2.1.1,RMON2-MIB::protocolDirID,OCTET,not-accessible,,current,,A unique identifier for a particular protocol. Standard identifiers will be defined in such a manner that they can often be used as specifications for new protocols - i.e., a tree-structured assignment mechanism that matches the protocol encapsulation 'tree' and that has algorithmic assignment mechanisms for certain subtrees. See RFC 2074 for more details. Despite the algorithmic mechanism, the probe will only place entries in here for those protocols it chooses to collect. In other words, it need not populate this table with all possible ethernet protocol types, nor need it create them on the fly when it sees them. Whether it does these things is a matter of product definition (cost/benefit, usability) and is up to the designer of the product. If an entry is written to this table with a protocolDirID that the agent doesn't understand, either directly or algorithmically, the SET request will be rejected with an inconsistentName or badValue (for SNMPv1) error.
.1.3.6.1.2.1.16.11.2.1.2,RMON2-MIB::protocolDirParameters,OCTET,not-accessible,,current,,A set of parameters for the associated protocolDirID. See the associated RMON2 Protocol Identifiers document for a description of the possible parameters. There will be one octet in this string for each sub-identifier in the protocolDirID, and the parameters will appear here in the same order as the associated sub-identifiers appear in the protocolDirID. Every node in the protocolDirID tree has a different, optional set of parameters defined (that is, the definition of parameters for a node is optional). The proper parameter value for each node is included in this string. Note that the inclusion of a parameter value in this string for each node is not optional. What is optional is that a node may have no parameters defined, in which case the parameter field for that node will be zero.
.1.3.6.1.2.1.16.11.2.1.3,RMON2-MIB::protocolDirLocalIndex,Integer32,read-only,,current,,The locally arbitrary but unique identifier associated with this protocolDir entry. The value for each supported protocol must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization, except that if a protocol is deleted and re-created, it must be re-created with a new value that has not been used since the last re-initialization. The specific value is meaningful only within a given SNMP entity. A protocolDirLocalIndex must not be re-used until the next agent restart in the event that the protocol directory entry is deleted.
.1.3.6.1.2.1.16.11.2.1.4,RMON2-MIB::protocolDirDescr,OCTET,read-create,,current,,A textual description of the protocol encapsulation. A probe may choose to describe only a subset of the entire encapsulation (e.g., only the highest layer). This object is intended for human consumption only. This object may not be modified if the associated protocolDirStatus object is equal to active(1).
.1.3.6.1.2.1.16.11.2.1.5,RMON2-MIB::protocolDirType,BITS,read-only,,current,extensible(0):addressRecognitionCapable(1),This object describes 2 attributes of this protocol directory entry. The presence or absence of the 'extensible' bit describes whether this protocol directory entry can be extended by the user by creating protocol directory entries that are children of this protocol. An example of an entry that will often allow extensibility is 'ip.udp'. The probe may automatically populate some children of this node, such as 'ip.udp.snmp' and 'ip.udp.dns'. A probe administrator or user may also populate additional children via remote SNMP requests that create entries in this table. When a child node is added for a protocol for which the probe has no built-in support extending a parent node (for which the probe does have built-in support), that child node is not extendable. This is termed 'limited extensibility'. When a child node is added through this extensibility mechanism, the values of protocolDirLocalIndex and protocolDirType shall be assigned by the agent. The other objects in the entry will be assigned by the manager who is creating the new entry. This object also describes whether this agent can recognize addresses for this protocol, should it be a network-level protocol. That is, while a probe may be able to recognize packets of a particular network-layer protocol and count them, it takes additional logic to be able to recognize the addresses in this protocol and to populate network-layer or application-layer tables with the addresses in this protocol. If this bit is set, the agent will recognize network-layer addresses for this protocol and populate the network- and application-layer host and matrix tables with these protocols. Note that when an entry is created, the agent will supply values for the bits that match the capabilities of the agent with respect to this protocol. Note that since row creations usually exercise the limited extensibility feature, these bits will usually be set to zero.
.1.3.6.1.2.1.16.11.2.1.6,RMON2-MIB::protocolDirAddressMapConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for address mapping for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to perform address mapping for the protocol or if this protocol is not a network-layer protocol. When an entry is created in this table by a management operation as part of the limited extensibility feature, the probe must set this value to notSupported(1), because limited extensibility of the protocolDirTable does not extend to interpreting addresses of the extended protocols. If the value of this object is notSupported(1), the probe will not perform address mapping for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports address mapping for this protocol and is configured to perform address mapping for this protocol for all addressMappingControlEntries and all interfaces. If the value of this object is supportedOff(2), the probe supports address mapping for this protocol but is configured to not perform address mapping for this protocol for any addressMappingControlEntries and all interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the addressMappingTable.
.1.3.6.1.2.1.16.11.2.1.7,RMON2-MIB::protocolDirHostConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer host tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlHostTable for this protocol or if the alHostTable is implemented but doesn't have the capability to track this protocol. Note that if the alHostTable is implemented, the probe may only support a protocol if it is supported in both the nlHostTable and the alHostTable. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate the nlHostTable and alHostTable with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track the nlHostTable or alHostTable for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of the nlHostTable and alHostTable for this protocol and is configured to track both tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of the nlHostTable and alHostTable for this protocol but is configured to not track these tables for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlHostTable and alHostTable. Note that since each alHostEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.8,RMON2-MIB::protocolDirMatrixConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer matrix tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlMatrixTables for this protocol or if the alMatrixTables are implemented but don't have the capability to track this protocol. Note that if the alMatrix tables are implemented, the probe may only support a protocol if it is supported in both of the nlMatrixTables and both of the alMatrixTables. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate both of the nlMatrixTables and both of the alMatrixTables with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track either of the nlMatrixTables or the alMatrixTables for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol and is configured to track these tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol but is configured to not track these tables for this protocol for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlMatrixTables and the alMatrixTables. Note that since each alMatrixEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.9,RMON2-MIB::protocolDirOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.11.2.1.10,RMON2-MIB::protocolDirStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this protocol directory entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable, nlMatrixSDTable, nlMatrixDSTable, alHostTable, alMatrixSDTable, and alMatrixDSTable shall be deleted.
.1.3.6.1.2.1.16.12,RMON2-MIB::protocolDist,,,,,,
.1.3.6.1.2.1.16.12.1,RMON2-MIB::protocolDistControlTable,,not-accessible,,current,,Controls the setup of protocol type distribution statistics tables. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of protocol statistics is available. Rationale: This table controls collection of very basic statistics for any or all of the protocols detected on a given interface. An NMS can use this table to quickly determine bandwidth allocation utilized by different protocols. A media-specific statistics collection could also be configured (e.g., etherStats, trPStats) to easily obtain total frame, octet, and droppedEvents for the same interface.
.1.3.6.1.2.1.16.12.1.1,RMON2-MIB::protocolDistControlEntry,,not-accessible,protocolDistControlIndex,current,,A conceptual row in the protocolDistControlTable. An example of the indexing of this entry is protocolDistControlDroppedFrames.7
.1.3.6.1.2.1.16.12.1.1.1,RMON2-MIB::protocolDistControlIndex,Integer32,not-accessible,,current,,A unique index for this protocolDistControlEntry.
.1.3.6.1.2.1.16.12.1.1.2,RMON2-MIB::protocolDistControlDataSource,OBJECT,read-create,,current,,The source of data for the this protocol distribution. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated protocolDistControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.12.1.1.3,RMON2-MIB::protocolDistControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.12.1.1.4,RMON2-MIB::protocolDistControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.12.1.1.5,RMON2-MIB::protocolDistControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.12.1.1.6,RMON2-MIB::protocolDistControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the protocolDistStatsTable shall be deleted.
.1.3.6.1.2.1.16.12.2,RMON2-MIB::protocolDistStatsTable,,not-accessible,,current,,An entry is made in this table for every protocol in the protocolDirTable that has been seen in at least one packet. Counters are updated in this table for every protocol type that is encountered when parsing a packet, but no counters are updated for packets with MAC-layer errors. Note that if a protocolDirEntry is deleted, all associated entries in this table are removed.
.1.3.6.1.2.1.16.12.2.1,RMON2-MIB::protocolDistStatsEntry,,not-accessible,protocolDistControlIndex:protocolDirLocalIndex,current,,A conceptual row in the protocolDistStatsTable. The index is composed of the protocolDistControlIndex of the associated protocolDistControlEntry, followed by the protocolDirLocalIndex of the associated protocol that this entry represents. In other words, the index identifies the protocol distribution an entry is a part of and the particular protocol that it represents. An example of the indexing of this entry is protocolDistStatsPkts.1.18
.1.3.6.1.2.1.16.12.2.1.1,RMON2-MIB::protocolDistStatsPkts,Gauge32,read-only,,current,,The number of packets of this protocol type received without errors. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.12.2.1.2,RMON2-MIB::protocolDistStatsOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type received since it was added to the protocolDistStatsTable (excluding framing bits, but including FCS octets), except for those octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.13,RMON2-MIB::addressMap,,,,,,
.1.3.6.1.2.1.16.13.1,RMON2-MIB::addressMapInserts,Counter32,read-only,,current,,The number of times an address mapping entry has been inserted into the addressMapTable. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.2,RMON2-MIB::addressMapDeletes,Counter32,read-only,,current,,The number of times an address mapping entry has been deleted from the addressMapTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.3,RMON2-MIB::addressMapMaxDesiredEntries,Integer32,read-write,,current,,The maximum number of entries that are desired in the addressMapTable. The probe will not create more than this number of entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.13.4,RMON2-MIB::addressMapControlTable,,not-accessible,,current,,A table to control the collection of mappings from network layer address to physical address to interface. Note that this is not like the typical RMON controlTable and dataTable in which each entry creates its own data table. Each entry in this table enables the discovery of addresses on a new interface and the placement of address mappings into the central addressMapTable. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of address mappings is available.
.1.3.6.1.2.1.16.13.4.1,RMON2-MIB::addressMapControlEntry,,not-accessible,addressMapControlIndex,current,,A conceptual row in the addressMapControlTable. An example of the indexing of this entry is addressMapControlDroppedFrames.1
.1.3.6.1.2.1.16.13.4.1.1,RMON2-MIB::addressMapControlIndex,Integer32,not-accessible,,current,,A unique index for this entry in the addressMapControlTable.
.1.3.6.1.2.1.16.13.4.1.2,RMON2-MIB::addressMapControlDataSource,OBJECT,read-create,,current,,The source of data for this addressMapControlEntry.
.1.3.6.1.2.1.16.13.4.1.3,RMON2-MIB::addressMapControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.13.4.1.4,RMON2-MIB::addressMapControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.13.4.1.5,RMON2-MIB::addressMapControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this addressMap control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the addressMapTable shall be deleted.
.1.3.6.1.2.1.16.13.5,RMON2-MIB::addressMapTable,,not-accessible,,current,,A table of mappings from network layer address to physical address to interface. The probe will add entries to this table based on the source MAC and network addresses seen in packets without MAC-level errors. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirAddressMapConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirAddressMapConfig value of supportedOff(2).
.1.3.6.1.2.1.16.13.5.1,RMON2-MIB::addressMapEntry,,not-accessible,addressMapTimeMark:protocolDirLocalIndex:addressMapNetworkAddress:addressMapSource,current,,A conceptual row in the addressMapTable. The protocolDirLocalIndex in the index identifies the network layer protocol of the addressMapNetworkAddress. An example of the indexing of this entry is addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.13.5.1.1,RMON2-MIB::addressMapTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.13.5.1.2,RMON2-MIB::addressMapNetworkAddress,OCTET,not-accessible,,current,,The network address for this relation. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of ip, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.13.5.1.3,RMON2-MIB::addressMapSource,OBJECT,not-accessible,,current,,The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [RFC2863], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface that is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.
.1.3.6.1.2.1.16.13.5.1.4,RMON2-MIB::addressMapPhysicalAddress,OCTET,read-only,,current,,The last source physical address on which the associated network address was seen. If the protocol of the associated network address was encapsulated inside of a network-level or higher protocol, this will be the address of the next-lower protocol with the addressRecognitionCapable bit enabled and will be formatted as specified for that protocol.
.1.3.6.1.2.1.16.13.5.1.5,RMON2-MIB::addressMapLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last created or the values of the physical address changed. This can be used to help detect duplicate address problems, in which case this object will be updated frequently.
.1.3.6.1.2.1.16.14,RMON2-MIB::nlHost,,,,,,
.1.3.6.1.2.1.16.14.1,RMON2-MIB::hlHostControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) host table control entries. These entries will enable the collection of the network- and application-level host tables indexed by network addresses. Both the network- and application-level host tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer host records in memory, it can derive network-layer host records from them.) Entries in the nlHostTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alHostTable, entries in the alHostTable will be created on behalf of each entry in this table. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of host statistics is available.
.1.3.6.1.2.1.16.14.1.1,RMON2-MIB::hlHostControlEntry,,not-accessible,hlHostControlIndex,current,,A conceptual row in the hlHostControlTable. An example of the indexing of this entry is hlHostControlNlDroppedFrames.1
.1.3.6.1.2.1.16.14.1.1.1,RMON2-MIB::hlHostControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlHostControlTable. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the nlHostTable, and optionally in the alHostTable, on behalf of this hlHostControlEntry.
.1.3.6.1.2.1.16.14.1.1.2,RMON2-MIB::hlHostControlDataSource,OBJECT,read-create,,current,,The source of data for the associated host tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlHostControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.14.1.1.3,RMON2-MIB::hlHostControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated nlHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlHostTable is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.4,RMON2-MIB::hlHostControlNlInserts,Counter32,read-only,,current,,The number of times an nlHost entry has been inserted into the nlHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.5,RMON2-MIB::hlHostControlNlDeletes,Counter32,read-only,,current,,The number of times an nlHost entry has been deleted from the nlHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.6,RMON2-MIB::hlHostControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlHostTable on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.7,RMON2-MIB::hlHostControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated alHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alHostTable is not implemented or is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.8,RMON2-MIB::hlHostControlAlInserts,Counter32,read-only,,current,,The number of times an alHost entry has been inserted into the alHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.9,RMON2-MIB::hlHostControlAlDeletes,Counter32,read-only,,current,,The number of times an alHost entry has been deleted from the alHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.10,RMON2-MIB::hlHostControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alHost table on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.11,RMON2-MIB::hlHostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.14.1.1.12,RMON2-MIB::hlHostControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlHostControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable and alHostTable shall be deleted.
.1.3.6.1.2.1.16.14.2,RMON2-MIB::nlHostTable,,not-accessible,,current,,A collection of statistics for a particular network layer address that has been discovered on an interface of this device. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors.
.1.3.6.1.2.1.16.14.2.1,RMON2-MIB::nlHostEntry,,not-accessible,hlHostControlIndex:nlHostTimeMark:protocolDirLocalIndex:nlHostAddress,current,,A conceptual row in the nlHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network layer protocol of the nlHostAddress. An example of the indexing of this entry is nlHostOutPkts.1.783495.18.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.14.2.1.1,RMON2-MIB::nlHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.14.2.1.2,RMON2-MIB::nlHostAddress,OCTET,not-accessible,,current,,The network address for this nlHostEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.14.2.1.3,RMON2-MIB::nlHostInPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted to this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.4,RMON2-MIB::nlHostOutPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.5,RMON2-MIB::nlHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.6,RMON2-MIB::nlHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.7,RMON2-MIB::nlHostOutMacNonUnicastPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address that were directed to any MAC broadcast addresses or to any MAC multicast addresses since this host was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.8,RMON2-MIB::nlHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15,RMON2-MIB::nlMatrix,,,,,,
.1.3.6.1.2.1.16.15.1,RMON2-MIB::hlMatrixControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) matrix control entries. These entries will enable the collection of the network- and application-level matrix tables containing conversation statistics indexed by pairs of network addresses. Both the network- and application-level matrix tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer matrix records in memory, it can derive network-layer matrix records from them.) Entries in the nlMatrixSDTable and nlMatrixDSTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alMatrix tables, entries in the alMatrix tables will be created on behalf of each entry in this table.
.1.3.6.1.2.1.16.15.1.1,RMON2-MIB::hlMatrixControlEntry,,not-accessible,hlMatrixControlIndex,current,,A conceptual row in the hlMatrixControlTable. An example of indexing of this entry is hlMatrixControlNlDroppedFrames.1
.1.3.6.1.2.1.16.15.1.1.1,RMON2-MIB::hlMatrixControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlMatrixControlTable. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the nlMatrixSDTable and the nlMatrixDSTable, and optionally the alMatrixSDTable and alMatrixDSTable, on behalf of this hlMatrixControlEntry.
.1.3.6.1.2.1.16.15.1.1.2,RMON2-MIB::hlMatrixControlDataSource,OBJECT,read-create,,current,,The source of the data for the associated matrix tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlMatrixControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.1.1.3,RMON2-MIB::hlMatrixControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlMatrixTables are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.4,RMON2-MIB::hlMatrixControlNlInserts,Counter32,read-only,,current,,The number of times an nlMatrix entry has been inserted into the nlMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the sum of then nlMatrixSDTable and nlMatrixDSTable sizes can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.5,RMON2-MIB::hlMatrixControlNlDeletes,Counter32,read-only,,current,,The number of times an nlMatrix entry has been deleted from the nlMatrix tables (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.6,RMON2-MIB::hlMatrixControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.7,RMON2-MIB::hlMatrixControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alMatrixTables are not implemented or are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.8,RMON2-MIB::hlMatrixControlAlInserts,Counter32,read-only,,current,,The number of times an alMatrix entry has been inserted into the alMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the alMatrixSDTable and alMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.9,RMON2-MIB::hlMatrixControlAlDeletes,Counter32,read-only,,current,,The number of times an alMatrix entry has been deleted from the alMatrix tables. If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the alMatrixSDTable and alMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.10,RMON2-MIB::hlMatrixControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.11,RMON2-MIB::hlMatrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.1.1.12,RMON2-MIB::hlMatrixControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlMatrixControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixSDTable, nlMatrixDSTable, alMatrixSDTable, and alMatrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.2,RMON2-MIB::nlMatrixSDTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all conversations from a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixDSTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.2.1,RMON2-MIB::nlMatrixSDEntry,,not-accessible,hlMatrixControlIndex:nlMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress,current,,A conceptual row in the nlMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. An example of the indexing of this table is nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.2.1.1,RMON2-MIB::nlMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.2.1.2,RMON2-MIB::nlMatrixSDSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.3,RMON2-MIB::nlMatrixSDDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.4,RMON2-MIB::nlMatrixSDPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.2.1.5,RMON2-MIB::nlMatrixSDOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.2.1.6,RMON2-MIB::nlMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.3,RMON2-MIB::nlMatrixDSTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all conversations to a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixSDTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.3.1,RMON2-MIB::nlMatrixDSEntry,,not-accessible,hlMatrixControlIndex:nlMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress,current,,A conceptual row in the nlMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixDSSourceAddress and nlMatrixDSDestAddress. An example of the indexing of this table is nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.3.1.1,RMON2-MIB::nlMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.3.1.2,RMON2-MIB::nlMatrixDSSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.3,RMON2-MIB::nlMatrixDSDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.4,RMON2-MIB::nlMatrixDSPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.3.1.5,RMON2-MIB::nlMatrixDSOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.3.1.6,RMON2-MIB::nlMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.4,RMON2-MIB::nlMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.15.4.1,RMON2-MIB::nlMatrixTopNControlEntry,,not-accessible,nlMatrixTopNControlIndex,current,,A conceptual row in the nlMatrixTopNControlTable. An example of the indexing of this table is nlMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.15.4.1.1,RMON2-MIB::nlMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.15.4.1.2,RMON2-MIB::nlMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The nlMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The nlMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.4.1.3,RMON2-MIB::nlMatrixTopNControlRateBase,INTEGER,read-create,,current,nlMatrixTopNPkts(1):nlMatrixTopNOctets(2):nlMatrixTopNHighCapacityPkts(3):nlMatrixTopNHighCapacityOctets(4),The variable for each nlMatrix[SD/DS] entry that the nlMatrixTopNEntries are sorted by, as well as a control for the table that the results will be reported in. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1). If this value is less than or equal to 2, when the report is prepared, entries are created in the nlMatrixTopNTable associated with this object. If this value is greater than or equal to 3, when the report is prepared, entries are created in the nlMatrixTopNHighCapacityTable associated with this object.
.1.3.6.1.2.1.16.15.4.1.4,RMON2-MIB::nlMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated nlMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of nlMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the nlMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the nlMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.15.4.1.5,RMON2-MIB::nlMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.15.4.1.6,RMON2-MIB::nlMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated nlMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the nlMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this nlMatrixTopNControlEntry.
.1.3.6.1.2.1.16.15.4.1.7,RMON2-MIB::nlMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set nlMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.15.4.1.8,RMON2-MIB::nlMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated nlMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated nlMatrixTopNControlRequestedSize object. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of nlMatrixTopNPktRate or nlMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.15.4.1.9,RMON2-MIB::nlMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated nlMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.15.4.1.10,RMON2-MIB::nlMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.4.1.11,RMON2-MIB::nlMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this nlMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.5,RMON2-MIB::nlMatrixTopNTable,,not-accessible,,current,,A set of statistics for those network-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.15.5.1,RMON2-MIB::nlMatrixTopNEntry,,not-accessible,nlMatrixTopNControlIndex:nlMatrixTopNIndex,current,,A conceptual row in the nlMatrixTopNTable. The nlMatrixTopNControlIndex value in the index identifies the nlMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is nlMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.15.5.1.1,RMON2-MIB::nlMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNPktRate until index N is assigned or there are no more nlMatrixTopNEntries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNOctetRate until index N is assigned or there are no more nlMatrixTopNEntries.
.1.3.6.1.2.1.16.15.5.1.2,RMON2-MIB::nlMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.15.5.1.3,RMON2-MIB::nlMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.4,RMON2-MIB::nlMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the nlMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.5,RMON2-MIB::nlMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.6,RMON2-MIB::nlMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. (Note that the corresponding nlMatrixSDPkts object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, the sort of topN entries is based entirely on nlMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.15.5.1.7,RMON2-MIB::nlMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDOctets object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.8,RMON2-MIB::nlMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixDSOctets object. (Note that the corresponding nlMatrixSDOctets object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, the sort of topN entries is based entirely on nlMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.16,RMON2-MIB::alHost,,,,,,
.1.3.6.1.2.1.16.16.1,RMON2-MIB::alHostTable,,not-accessible,,current,,A collection of statistics for a particular protocol from a particular network address that has been discovered on an interface of this device. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address exists in the nlHostTable and will be deleted from this table if their address is deleted from the nlHostTable.
.1.3.6.1.2.1.16.16.1.1,RMON2-MIB::alHostEntry,,not-accessible,hlHostControlIndex:alHostTimeMark:protocolDirLocalIndex:nlHostAddress:protocolDirLocalIndex,current,,A conceptual row in the alHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the address. The nlHostAddress value in the index identifies the network- layer address of this entry. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing in this entry is alHostOutPkts.1.783495.18.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.16.1.1.1,RMON2-MIB::alHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.16.1.1.2,RMON2-MIB::alHostInPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted to this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.3,RMON2-MIB::alHostOutPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted by this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.4,RMON2-MIB::alHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.5,RMON2-MIB::alHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.6,RMON2-MIB::alHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17,RMON2-MIB::alMatrix,,,,,,
.1.3.6.1.2.1.16.17.1,RMON2-MIB::alMatrixSDTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all statistics from a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixSDTable and will be deleted from this table if the address pair is deleted from the nlMatrixSDTable.
.1.3.6.1.2.1.16.17.1.1,RMON2-MIB::alMatrixSDEntry,,not-accessible,hlMatrixControlIndex:alMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. The nlMatrixSDSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The nlMatrixSDDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.1.1.1,RMON2-MIB::alMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.1.1.2,RMON2-MIB::alMatrixSDPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.1.1.3,RMON2-MIB::alMatrixSDOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.1.1.4,RMON2-MIB::alMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.2,RMON2-MIB::alMatrixDSTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all statistics to a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixDSTable and will be deleted from this table if the address pair is deleted from the nlMatrixDSTable.
.1.3.6.1.2.1.16.17.2.1,RMON2-MIB::alMatrixDSEntry,,not-accessible,hlMatrixControlIndex:alMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the alMatrixDSSourceAddress and alMatrixDSDestAddress. The nlMatrixDSDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The nlMatrixDSSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.2.1.1,RMON2-MIB::alMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.2.1.2,RMON2-MIB::alMatrixDSPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.2.1.3,RMON2-MIB::alMatrixDSOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.2.1.4,RMON2-MIB::alMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.3,RMON2-MIB::alMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.17.3.1,RMON2-MIB::alMatrixTopNControlEntry,,not-accessible,alMatrixTopNControlIndex,current,,A conceptual row in the alMatrixTopNControlTable. An example of the indexing of this table is alMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.17.3.1.1,RMON2-MIB::alMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.17.3.1.2,RMON2-MIB::alMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The alMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The alMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.3,RMON2-MIB::alMatrixTopNControlRateBase,INTEGER,read-create,,current,alMatrixTopNTerminalsPkts(1):alMatrixTopNTerminalsOctets(2):alMatrixTopNAllPkts(3):alMatrixTopNAllOctets(4):alMatrixTopNTerminalsHighCapacityPkts(5):alMatrixTopNTerminalsHighCapacityOctets(6):alMatrixTopNAllHighCapacityPkts(7):alMatrixTopNAllHighCapacityOctets(8),This object controls which alMatrix[SD/DS] entry that the alMatrixTopNEntries are sorted by, which view of the matrix table that will be used, as well as which table the results will be reported in. The values alMatrixTopNTerminalsPkts, alMatrixTopNTerminalsOctets, alMatrixTopNTerminalsHighCapacityPkts, and alMatrixTopNTerminalsHighCapacityOctets cause collection only from protocols that have no child protocols that are counted. The values alMatrixTopNAllPkts, alMatrixTopNAllOctets, alMatrixTopNAllHighCapacityPkts, and alMatrixTopNAllHighCapacityOctets cause collection from all alMatrix entries. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.4,RMON2-MIB::alMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated alMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of alMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the alMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the alMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.17.3.1.5,RMON2-MIB::alMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.17.3.1.6,RMON2-MIB::alMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated alMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the alMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this alMatrixTopNControlEntry.
.1.3.6.1.2.1.16.17.3.1.7,RMON2-MIB::alMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set alMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.17.3.1.8,RMON2-MIB::alMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated alMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated alMatrixTopNControlRequestedSize object. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of alMatrixTopNPktRate or alMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.17.3.1.9,RMON2-MIB::alMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated alMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.17.3.1.10,RMON2-MIB::alMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.17.3.1.11,RMON2-MIB::alMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this alMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the alMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.17.4,RMON2-MIB::alMatrixTopNTable,,not-accessible,,current,,A set of statistics for those application-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.17.4.1,RMON2-MIB::alMatrixTopNEntry,,not-accessible,alMatrixTopNControlIndex:alMatrixTopNIndex,current,,A conceptual row in the alMatrixTopNTable. The alMatrixTopNControlIndex value in the index identifies the alMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is alMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.17.4.1.1,RMON2-MIB::alMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNPktRate until index N is assigned or there are no more alMatrixTopNEntries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNOctetRate until index N is assigned or there are no more alMatrixTopNEntries.
.1.3.6.1.2.1.16.17.4.1.2,RMON2-MIB::alMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.17.4.1.3,RMON2-MIB::alMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.4,RMON2-MIB::alMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.5,RMON2-MIB::alMatrixTopNAppProtocolDirLocalIndex,Integer32,read-only,,current,,The type of the protocol counted by this matrix entry.
.1.3.6.1.2.1.16.17.4.1.6,RMON2-MIB::alMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDPkts object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.7,RMON2-MIB::alMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSPkts object. (Note that the corresponding alMatrixSDPkts object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, the sort of topN entries is based entirely on alMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.17.4.1.8,RMON2-MIB::alMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDOctets object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.9,RMON2-MIB::alMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSOctets object. (Note that the corresponding alMatrixSDOctets object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, the sort of topN entries is based entirely on alMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.18,RMON2-MIB::usrHistory,,,,,,
.1.3.6.1.2.1.16.18.1,RMON2-MIB::usrHistoryControlTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.1.1,RMON2-MIB::usrHistoryControlEntry,,not-accessible,usrHistoryControlIndex,current,,A list of parameters that set up a group of user-defined MIB objects to be sampled periodically (called a bucket-group). For example, an instance of usrHistoryControlInterval might be named usrHistoryControlInterval.1
.1.3.6.1.2.1.16.18.1.1.1,RMON2-MIB::usrHistoryControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the usrHistoryControlTable. Each such entry defines a set of samples at a particular interval for a specified set of MIB instances available from the managed system.
.1.3.6.1.2.1.16.18.1.1.2,RMON2-MIB::usrHistoryControlObjects,Integer32,read-create,,current,,The number of MIB objects to be collected in the portion of usrHistoryTable associated with this usrHistoryControlEntry. This object may not be modified if the associated instance of usrHistoryControlStatus is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.3,RMON2-MIB::usrHistoryControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When this object is created or modified, the probe should set usrHistoryControlBucketsGranted as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.18.1.1.4,RMON2-MIB::usrHistoryControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When the associated usrHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated usrHistoryControlBucketsRequested object. The associated usrHistoryControlBucketsRequested object should be set before or at the same time as this object to allow the probe to accurately estimate the resources required for this usrHistoryControlEntry. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the usrHistoryTable. When the number of buckets reaches the value of this object and a new bucket is to be added to the usrHistoryTable, the oldest bucket associated with this usrHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the usrHistoryTable associated with this usrHistoryControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated usrHistory entries may be allowed to grow.
.1.3.6.1.2.1.16.18.1.1.5,RMON2-MIB::usrHistoryControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the usrHistory table associated with this usrHistoryControlEntry. Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and to set the usrHistoryControlInterval object to a value less than this interval. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.6,RMON2-MIB::usrHistoryControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.18.1.1.7,RMON2-MIB::usrHistoryControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this variable history control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the usrHistoryTable shall be deleted.
.1.3.6.1.2.1.16.18.2,RMON2-MIB::usrHistoryObjectTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.2.1,RMON2-MIB::usrHistoryObjectEntry,,not-accessible,usrHistoryControlIndex:usrHistoryObjectIndex,current,,A list of MIB instances to be sampled periodically. Entries in this table are created when an associated usrHistoryControlObjects object is created. The usrHistoryControlIndex value in the index is that of the associated usrHistoryControlEntry. For example, an instance of usrHistoryObjectVariable might be usrHistoryObjectVariable.1.3
.1.3.6.1.2.1.16.18.2.1.1,RMON2-MIB::usrHistoryObjectIndex,Integer32,not-accessible,,current,,An index used to uniquely identify an entry in the usrHistoryObject table. Each such entry defines a MIB instance to be collected periodically.
.1.3.6.1.2.1.16.18.2.1.2,RMON2-MIB::usrHistoryObjectVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of Integer32 (Integer32, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the user history mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. See USM [RFC3414] and VACM [RFC3415] for more information. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.2.1.3,RMON2-MIB::usrHistoryObjectSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable for storage in the usrHistoryTable. If the value of this object is absoluteValue(1), the value of the selected variable will be copied directly into the history bucket. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference will be stored in the history bucket. If the associated usrHistoryObjectVariable instance could not be obtained at the previous sample interval, then a delta sample is not possible, and the value of the associated usrHistoryValStatus object for this interval will be valueNotAvailable(1). This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.3,RMON2-MIB::usrHistoryTable,,not-accessible,,current,,A list of user-defined history entries.
.1.3.6.1.2.1.16.18.3.1,RMON2-MIB::usrHistoryEntry,,not-accessible,usrHistoryControlIndex:usrHistorySampleIndex:usrHistoryObjectIndex,current,,A historical sample of user-defined variables. This sample is associated with the usrHistoryControlEntry that set up the parameters for a regular collection of these samples. The usrHistoryControlIndex value in the index identifies the usrHistoryControlEntry on whose behalf this entry was created. The usrHistoryObjectIndex value in the index identifies the usrHistoryObjectEntry on whose behalf this entry was created. For example, an instance of usrHistoryAbsValue, which represents the 14th sample of a variable collected as specified by usrHistoryControlEntry.1 and usrHistoryObjectEntry.1.5, would be named usrHistoryAbsValue.1.14.5
.1.3.6.1.2.1.16.18.3.1.1,RMON2-MIB::usrHistorySampleIndex,Integer32,not-accessible,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same usrHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.18.3.1.2,RMON2-MIB::usrHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require that the probe delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample that is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.18.3.1.3,RMON2-MIB::usrHistoryIntervalEnd,TimeTicks,read-only,,current,,The value of sysUpTime at the end of the interval over which this sample was measured.
.1.3.6.1.2.1.16.18.3.1.4,RMON2-MIB::usrHistoryAbsValue,Gauge32,read-only,,current,,The absolute value (i.e., unsigned value) of the user-specified statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed. To obtain the true value for this sampling interval, the associated instance of usrHistoryValStatus must be checked, and usrHistoryAbsValue adjusted as necessary. If the MIB instance could not be accessed during the sampling interval, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'. The access control check prescribed in the definition of usrHistoryObjectVariable SHOULD be checked for each sampling interval. If this check determines that access should not be allowed, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'.
.1.3.6.1.2.1.16.18.3.1.5,RMON2-MIB::usrHistoryValStatus,INTEGER,read-only,,current,valueNotAvailable(1):valuePositive(2):valueNegative(3),This object indicates the validity and sign of the data in the associated instance of usrHistoryAbsValue. If the MIB instance could not be accessed during the sampling interval, then 'valueNotAvailable(1)' will be returned. If the sample is valid and the actual value of the sample is greater than or equal to zero, then 'valuePositive(2)' is returned. If the sample is valid and the actual value of the sample is less than zero, 'valueNegative(3)' will be returned. The associated instance of usrHistoryAbsValue should be multiplied by -1 to obtain the true sample value.
.1.3.6.1.2.1.16.19,RMON2-MIB::probeConfig,,,,,,
.1.3.6.1.2.1.16.19.1,RMON2-MIB::probeCapabilities,BITS,read-only,,current,etherStats(0):historyControl(1):etherHistory(2):alarm(3):hosts(4):hostTopN(5):matrix(6):filter(7):capture(8):event(9):tokenRingMLStats(10):tokenRingPStats(11):tokenRingMLHistory(12):tokenRingPHistory(13):ringStation(14):ringStationOrder(15):ringStationConfig(16):sourceRouting(17):protocolDirectory(18):protocolDistribution(19):addressMapping(20):nlHost(21):nlMatrix(22):alHost(23):alMatrix(24):usrHistory(25):probeConfig(26),An indication of the RMON MIB groups supported on at least one interface by this probe.
.1.3.6.1.2.1.16.19.2,RMON2-MIB::probeSoftwareRev,OCTET,read-only,,current,,The software revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.3,RMON2-MIB::probeHardwareRev,OCTET,read-only,,current,,The hardware revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.4,RMON2-MIB::probeDateTime,OCTET,read-write,,current,,Probe's current date and time. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then time zone information (fields 8-10) is not present, and that if no time information is known, the null string is returned.
.1.3.6.1.2.1.16.19.5,RMON2-MIB::probeResetControl,INTEGER,read-write,,current,running(1):warmBoot(2):coldBoot(3),Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and to restart the application software. When the device is running normally, this variable has a value of running(1).
.1.3.6.1.2.1.16.19.6,RMON2-MIB::probeDownloadFile,OCTET,read-write,,deprecated,,The file name to be downloaded from the TFTP server when a download is next requested via this MIB. This value is set to the zero-length string when no file name has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.7,RMON2-MIB::probeDownloadTFTPServer,IpAddress,read-write,,deprecated,,The IP address of the TFTP server that contains the boot image to load when a download is next requested via this MIB. This value is set to '0.0.0.0' when no IP address has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.8,RMON2-MIB::probeDownloadAction,INTEGER,read-write,,deprecated,notDownloading(1):downloadToPROM(2):downloadToRAM(3),When this object is set to downloadToRAM(3) or downloadToPROM(2), the device will discontinue its normal operation and begin download of the image specified by probeDownloadFile from the server specified by probeDownloadTFTPServer using the TFTP protocol. If downloadToRAM(3) is specified, the new image is copied to RAM only (the old image remains unaltered in the flash EPROM). If downloadToPROM(2) is specified, the new image is written to the flash EPROM memory after its checksum has been verified to be correct. When the download process is completed, the device will warm boot to restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1). This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.9,RMON2-MIB::probeDownloadStatus,INTEGER,read-only,,deprecated,downloadSuccess(1):downloadStatusUnknown(2):downloadGeneralError(3):downloadNoResponseFromServer(4):downloadChecksumError(5):downloadIncompatibleImage(6):downloadTftpFileNotFound(7):downloadTftpAccessViolation(8),The status of the last download procedure, if any. This object will have a value of downloadStatusUnknown(2) if no download process has been performed. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10,RMON2-MIB::serialConfigTable,,not-accessible,,deprecated,,A table of serial interface configuration entries. This data will be stored in non-volatile memory and preserved across probe resets or power loss. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10.1,RMON2-MIB::serialConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular serial interface on this device. If the device has no serial interfaces, this table is empty. The index is composed of the ifIndex assigned to this serial line interface.
.1.3.6.1.2.1.16.19.10.1.1,RMON2-MIB::serialMode,INTEGER,read-create,,deprecated,direct(1):modem(2),The type of incoming connection to be expected on this serial interface.
.1.3.6.1.2.1.16.19.10.1.2,RMON2-MIB::serialProtocol,INTEGER,read-create,,deprecated,other(1):slip(2):ppp(3),The type of data link encapsulation to be used on this serial interface.
.1.3.6.1.2.1.16.19.10.1.3,RMON2-MIB::serialTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the Management Station has initiated the conversation over the serial link. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface. Use the serialDialoutTimeout in the case where the probe has initiated the connection for the purpose of sending a trap.
.1.3.6.1.2.1.16.19.10.1.4,RMON2-MIB::serialModemInitString,OCTET,read-create,,deprecated,,A control string that controls how a modem attached to this serial interface should be initialized. The initialization is performed once during startup and again after each connection is terminated if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^s^MATE0Q0V1X4 S0=1 S2=43^M'.
.1.3.6.1.2.1.16.19.10.1.5,RMON2-MIB::serialModemHangUpString,OCTET,read-create,,deprecated,,A control string that specifies how to disconnect a modem connection on this serial interface. This object is only meaningful if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^d2^s+++^d2^sATH0^M^d2'.
.1.3.6.1.2.1.16.19.10.1.6,RMON2-MIB::serialModemConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing substrings that describe the expected modem connection response code and associated bps rate. The substrings are delimited by the first character in the string, for example: /CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600 will be interpreted as: response code bps rate CONNECT 300 CONNECT 1200 1200 CONNECT 2400 2400 CONNECT 4800 4800 CONNECT 9600 9600 The agent will use the information in this string to adjust the bps rate of this serial interface once a modem connection is established. A value that is appropriate for a wide variety of modems is: '/CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600/CONNECT 14400/14400/ CONNECT 19200/19200/CONNECT 38400/38400/'.
.1.3.6.1.2.1.16.19.10.1.7,RMON2-MIB::serialModemNoConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing response codes that may be generated by a modem to report the reason why a connection attempt has failed. The response codes are delimited by the first character in the string, for example: /NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/ If one of these response codes is received via this serial interface while attempting to make a modem connection, the agent will issue the hang up command as specified by serialModemHangUpString. A value that is appropriate for a wide variety of modems is: '/NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/'.
.1.3.6.1.2.1.16.19.10.1.8,RMON2-MIB::serialDialoutTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the probe initiates the serial connection with the intention of contacting a management station. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface.
.1.3.6.1.2.1.16.19.10.1.9,RMON2-MIB::serialStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.11,RMON2-MIB::netConfigTable,,not-accessible,,deprecated,,A table of netConfigEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.11.1,RMON2-MIB::netConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface.
.1.3.6.1.2.1.16.19.11.1.1,RMON2-MIB::netConfigIPAddress,IpAddress,read-create,,deprecated,,The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.2,RMON2-MIB::netConfigSubnetMask,IpAddress,read-create,,deprecated,,The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.3,RMON2-MIB::netConfigStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this netConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.12,RMON2-MIB::netDefaultGateway,IpAddress,read-write,,deprecated,,The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
.1.3.6.1.2.1.16.19.13,RMON2-MIB::trapDestTable,,not-accessible,,deprecated,,A list of trap destination entries.
.1.3.6.1.2.1.16.19.13.1,RMON2-MIB::trapDestEntry,,not-accessible,trapDestIndex,deprecated,,This entry includes a destination IP address to which traps are sent for this community.
.1.3.6.1.2.1.16.19.13.1.1,RMON2-MIB::trapDestIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this trapDestEntry.
.1.3.6.1.2.1.16.19.13.1.2,RMON2-MIB::trapDestCommunity,OCTET,read-create,,deprecated,,A community to which this destination address belongs. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the trapDestTable with a trapDestCommunity equal to eventCommunity, as long as no access control mechanism precludes it (e.g., VACM). This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.3,RMON2-MIB::trapDestProtocol,INTEGER,read-create,,deprecated,ip(1):ipx(2),The protocol with which this trap is to be sent.
.1.3.6.1.2.1.16.19.13.1.4,RMON2-MIB::trapDestAddress,OCTET,read-create,,deprecated,,The destination address for traps on behalf of this entry. If the associated trapDestProtocol object is equal to ip(1), the encoding of this object is the same as the snmpUDPAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpUDPAddress of length 6: -- -- octets contents encoding -- 1-4 IP-address network-byte order -- 5-6 UDP-port network-byte order If the associated trapDestProtocol object is equal to ipx(2), the encoding of this object is the same as the snmpIPXAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpIPXAddress of length 12: -- -- octets contents encoding -- 1-4 network-number network-byte order -- 5-10 physical-address network-byte order -- 11-12 socket-number network-byte order This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.5,RMON2-MIB::trapDestOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.13.1.6,RMON2-MIB::trapDestStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this trap destination entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.14,RMON2-MIB::serialConnectionTable,,not-accessible,,deprecated,,A list of serialConnectionEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.14.1,RMON2-MIB::serialConnectionEntry,,not-accessible,serialConnectIndex,deprecated,,Configuration for a SLIP link over a serial line.
.1.3.6.1.2.1.16.19.14.1.1,RMON2-MIB::serialConnectIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this serialConnection entry.
.1.3.6.1.2.1.16.19.14.1.2,RMON2-MIB::serialConnectDestIpAddress,IpAddress,read-create,,deprecated,,The IP Address that can be reached at the other end of this serial connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.3,RMON2-MIB::serialConnectType,INTEGER,read-create,,deprecated,direct(1):modem(2):switch(3):modemSwitch(4),The type of outgoing connection to be made. If this object has the value direct(1), then a direct serial connection is assumed. If this object has the value modem(2), then serialConnectDialString will be used to make a modem connection. If this object has the value switch(3), then serialConnectSwitchConnectSeq will be used to establish the connection over a serial data switch, and serialConnectSwitchDisconnectSeq will be used to terminate the connection. If this object has the value modem-switch(4), then a modem connection will be made first, followed by the switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.4,RMON2-MIB::serialConnectDialString,OCTET,read-create,,deprecated,,A control string that specifies how to dial the phone number in order to establish a modem connection. The string should include the dialing prefix and suffix. For example: '^s^MATD9,888-1234^M' will instruct the Probe to send a carriage return, followed by the dialing prefix 'ATD', the phone number '9,888-1234', and a carriage return as the dialing suffix. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.5,RMON2-MIB::serialConnectSwitchConnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to establish a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.6,RMON2-MIB::serialConnectSwitchDisconnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to terminate a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.7,RMON2-MIB::serialConnectSwitchResetSeq,OCTET,read-create,,deprecated,,A control string that specifies how to reset a data switch in the event of a timeout. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.8,RMON2-MIB::serialConnectOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.14.1.9,RMON2-MIB::serialConnectStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConnectionEntry. If the manager attempts to set this object to active(1) when the serialConnectType is set to modem(2) or modem-switch(4) and the serialConnectDialString is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). If the manager attempts to set this object to active(1) when the serialConnectType is set to switch(3) or modem-switch(4) and the serialConnectSwitchConnectSeq, the serialConnectSwitchDisconnectSeq, or the serialConnectSwitchResetSeq is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.20,RMON-MIB::rmonConformance,,,,,,
.1.3.6.1.2.1.16.20.1,RMON2-MIB::rmon2MIBCompliances,,,,,,
.1.3.6.1.2.1.16.20.1.1,RMON2-MIB::rmon2MIBCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB
.1.3.6.1.2.1.16.20.1.2,RMON2-MIB::rmon2MIBApplicationLayerCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB with Application-Layer Enhancements.
.1.3.6.1.2.1.16.20.2,RMON2-MIB::rmon2MIBGroups,,,,,,
.1.3.6.1.2.1.16.20.2.1,RMON2-MIB::protocolDirectoryGroup,,,,,,Lists the inventory of protocols the probe has the capability of monitoring and allows the addition, deletion, and configuration of entries in this list.
.1.3.6.1.2.1.16.20.2.2,RMON2-MIB::protocolDistributionGroup,,,,,,Collects the relative amounts of octets and packets for the different protocols detected on a network segment.
.1.3.6.1.2.1.16.20.2.3,RMON2-MIB::addressMapGroup,,,,,,Lists MAC address to network address bindings discovered by the probe and what interface they were last seen on.
.1.3.6.1.2.1.16.20.2.4,RMON2-MIB::nlHostGroup,,,,,,Counts the amount of traffic sent from and to each network address discovered by the probe. Note that while the hlHostControlTable also has objects that control an optional alHostTable, implementation of the alHostTable is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.5,RMON2-MIB::nlMatrixGroup,,,,,,Counts the amount of traffic sent between each pair of network addresses discovered by the probe. Note that while the hlMatrixControlTable also has objects that control optional alMatrixTables, implementation of the alMatrixTables is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.6,RMON2-MIB::alHostGroup,,,,,,Counts the amount of traffic, by protocol, sent from and to each network address discovered by the probe. Implementation of this group requires implementation of the Network-Layer Host Group.
.1.3.6.1.2.1.16.20.2.7,RMON2-MIB::alMatrixGroup,,,,,,Counts the amount of traffic, by protocol, sent between each pair of network addresses discovered by the probe. Implementation of this group requires implementation of the Network-Layer Matrix Group.
.1.3.6.1.2.1.16.20.2.8,RMON2-MIB::usrHistoryGroup,,,,,,The usrHistoryGroup provides user-defined collection of historical information from MIB objects on the probe.
.1.3.6.1.2.1.16.20.2.9,RMON2-MIB::probeInformationGroup,,,,,,This group describes various operating parameters of the probe and controls the local time of the probe.
.1.3.6.1.2.1.16.20.2.10,RMON2-MIB::probeConfigurationGroup,,,,,,This group controls the configuration of various operating parameters of the probe. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.2.11,RMON2-MIB::rmon1EnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.12,RMON2-MIB::rmon1EthernetEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.13,RMON2-MIB::rmon1TokenRingEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.8,RMON-MIB::rmonMibModule,,,,,,Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices.
.1.3.6.1.2.1.16.20.9,RMON-MIB::rmonCompliances,,,,,,
.1.3.6.1.2.1.16.20.9.1,RMON-MIB::rmonCompliance,,,,,,The requirements for conformance to the RMON MIB. At least one of the groups in this module must be implemented to conform to the RMON MIB. Implementations of this MIB must also implement the system group of MIB-II [16] and the IF-MIB [17].
.1.3.6.1.2.1.16.20.10,RMON-MIB::rmonGroups,,,,,,
.1.3.6.1.2.1.16.20.10.1,RMON-MIB::rmonEtherStatsGroup,,,,,,The RMON Ethernet Statistics Group.
.1.3.6.1.2.1.16.20.10.2,RMON-MIB::rmonHistoryControlGroup,,,,,,The RMON History Control Group.
.1.3.6.1.2.1.16.20.10.3,RMON-MIB::rmonEthernetHistoryGroup,,,,,,The RMON Ethernet History Group.
.1.3.6.1.2.1.16.20.10.4,RMON-MIB::rmonAlarmGroup,,,,,,The RMON Alarm Group.
.1.3.6.1.2.1.16.20.10.5,RMON-MIB::rmonHostGroup,,,,,,The RMON Host Group.
.1.3.6.1.2.1.16.20.10.6,RMON-MIB::rmonHostTopNGroup,,,,,,The RMON Host Top 'N' Group.
.1.3.6.1.2.1.16.20.10.7,RMON-MIB::rmonMatrixGroup,,,,,,The RMON Matrix Group.
.1.3.6.1.2.1.16.20.10.8,RMON-MIB::rmonFilterGroup,,,,,,The RMON Filter Group.
.1.3.6.1.2.1.16.20.10.9,RMON-MIB::rmonPacketCaptureGroup,,,,,,The RMON Packet Capture Group.
.1.3.6.1.2.1.16.20.10.10,RMON-MIB::rmonEventGroup,,,,,,The RMON Event Group.
.1.3.6.1.2.1.16.20.10.11,RMON-MIB::rmonNotificationGroup,,,,,,The RMON Notification Group.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.2.1.31,IF-MIB::ifMIB,,,,,,The MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229.
.1.3.6.1.2.1.31.1,IF-MIB::ifMIBObjects,,,,,,
.1.3.6.1.2.1.31.1.1,IF-MIB::ifXTable,,not-accessible,,current,,A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
.1.3.6.1.2.1.31.1.1.1,IF-MIB::ifXEntry,,not-accessible,,current,,An entry containing additional management information applicable to a particular interface.
.1.3.6.1.2.1.31.1.1.1.1,IF-MIB::ifName,OCTET,read-only,,current,,The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
.1.3.6.1.2.1.31.1.1.1.2,IF-MIB::ifInMulticastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.3,IF-MIB::ifInBroadcastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.4,IF-MIB::ifOutMulticastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.5,IF-MIB::ifOutBroadcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.6,IF-MIB::ifHCInOctets,Counter64,read-only,,current,,The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.7,IF-MIB::ifHCInUcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.8,IF-MIB::ifHCInMulticastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.9,IF-MIB::ifHCInBroadcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.10,IF-MIB::ifHCOutOctets,Counter64,read-only,,current,,The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.11,IF-MIB::ifHCOutUcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.12,IF-MIB::ifHCOutMulticastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.13,IF-MIB::ifHCOutBroadcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.14,IF-MIB::ifLinkUpDownTrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
.1.3.6.1.2.1.31.1.1.1.15,IF-MIB::ifHighSpeed,Gauge32,read-only,,current,,An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
.1.3.6.1.2.1.31.1.1.1.16,IF-MIB::ifPromiscuousMode,INTEGER,read-write,,current,true(1):false(2),This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface.
.1.3.6.1.2.1.31.1.1.1.17,IF-MIB::ifConnectorPresent,INTEGER,read-only,,current,true(1):false(2),This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise.
.1.3.6.1.2.1.31.1.1.1.18,IF-MIB::ifAlias,OCTET,read-write,,current,,This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
.1.3.6.1.2.1.31.1.1.1.19,IF-MIB::ifCounterDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the ifTable or ifXTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.2,IF-MIB::ifStackTable,,not-accessible,,current,,The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'on top of' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs over the sub-layer with ifIndex value y, then this table contains: ifStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.0.x=active ifStackStatus.x.0=active 
.1.3.6.1.2.1.31.1.2.1,IF-MIB::ifStackEntry,,not-accessible,ifStackHigherLayer:ifStackLowerLayer,current,,Information on a particular relationship between two sub- layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
.1.3.6.1.2.1.31.1.2.1.1,IF-MIB::ifStackHigherLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corresponding instance of ifStackLowerLayer. If there is no higher sub-layer (below the internetwork layer), then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.2,IF-MIB::ifStackLowerLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the lower sub-layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of ifStackHigherLayer. If there is no lower sub-layer, then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.3,IF-MIB::ifStackStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the relationship between two sub-layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down the interface stack. Thus, write access to this object is likely to be inappropriate for some types of interfaces, and many implementations will choose not to support write-access for any type of interface.
.1.3.6.1.2.1.31.1.3,IF-MIB::ifTestTable,,not-accessible,,deprecated,,This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tests for an interface are defined in the media-specific MIB for that interface. After invoking a test, the object ifTestResult can be read to determine the outcome. If an agent can not perform the test, ifTestResult is set to so indicate. The object ifTestCode can be used to provide further test- specific or interface-specific (or even enterprise-specific) information concerning the outcome of the test. Only one test can be in progress on each interface at any one time. If one test is in progress when another test is invoked, the second test is rejected. Some agents may reject a test when a prior test is active on another interface. Before starting a test, a manager-station must first obtain 'ownership' of the entry in the ifTestTable for the interface to be tested. This is accomplished with the ifTestId and ifTestStatus objects as follows: try_again: get (ifTestId, ifTestStatus) while (ifTestStatus != notInUse) /* * Loop while a test is running or some other * manager is configuring a test. */ short delay get (ifTestId, ifTestStatus) } /* * Is not being used right now -- let's compete * to see who gets it. */ lock_value = ifTestId if ( set(ifTestId = lock_value, ifTestStatus = inUse, ifTestOwner = 'my-IP-address') == FAILURE) /* * Another manager got the ifTestEntry -- go * try again */ goto try_again; /* * I have the lock */ set up any test parameters. /* * This starts the test */ set(ifTestType = test_to_run); wait for test completion by polling ifTestResult when test completes, agent sets ifTestResult agent also sets ifTestStatus = 'notInUse' retrieve any additional test results, and ifTestId if (ifTestId == lock_value+1) results are valid A manager station first retrieves the value of the appropriate ifTestId and ifTestStatus objects, periodically repeating the retrieval if necessary, until the value of ifTestStatus is 'notInUse'. The manager station then tries to set the same ifTestId object to the value it just retrieved, the same ifTestStatus object to 'inUse', and the corresponding ifTestOwner object to a value indicating itself. If the set operation succeeds then the manager has obtained ownership of the ifTestEntry, and the value of the ifTestId object is incremented by the agent (per the semantics of TestAndIncr). Failure of the set operation indicates that some other manager has obtained ownership of the ifTestEntry. Once ownership is obtained, any test parameters can be setup, and then the test is initiated by setting ifTestType. On completion of the test, the agent sets ifTestStatus to 'notInUse'. Once this occurs, the manager can retrieve the results. In the (rare) event that the invocation of tests by two network managers were to overlap, then there would be a possibility that the first test's results might be overwritten by the second test's results prior to the first results being read. This unlikely circumstance ca
.1.3.6.1.2.1.31.1.3.1,IF-MIB::ifTestEntry,,not-accessible,,deprecated,,An entry containing objects for invoking tests on an interface.
.1.3.6.1.2.1.31.1.3.1.1,IF-MIB::ifTestId,INTEGER,read-write,,deprecated,,This object identifies the current invocation of the interface's test.
.1.3.6.1.2.1.31.1.3.1.2,IF-MIB::ifTestStatus,INTEGER,read-write,,deprecated,notInUse(1):inUse(2),This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
.1.3.6.1.2.1.31.1.3.1.3,IF-MIB::ifTestType,OBJECT,read-write,,deprecated,,A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full-duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
.1.3.6.1.2.1.31.1.3.1.4,IF-MIB::ifTestResult,INTEGER,read-only,,deprecated,none(1):success(2):inProgress(3):notSupported(4):unAbleToRun(5):aborted(6):failed(7),This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
.1.3.6.1.2.1.31.1.3.1.5,IF-MIB::ifTestCode,OBJECT,read-only,,deprecated,,This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or InstancePointer textual conventions as defined in RFC 2579. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
.1.3.6.1.2.1.31.1.3.1.6,IF-MIB::ifTestOwner,OCTET,read-write,,deprecated,,The entity which currently has the 'ownership' required to invoke a test on this interface.
.1.3.6.1.2.1.31.1.4,IF-MIB::ifRcvAddressTable,,not-accessible,,current,,This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/frames on a particular interface, except as follows: - for an interface operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode. - for 802.5 functional addresses, only one entry is required, for the address which has the functional address bit ANDed with the bit mask of all functional addresses for which the interface will accept frames. A system is normally able to use any unicast address which corresponds to an entry in this table as a source address.
.1.3.6.1.2.1.31.1.4.1,IF-MIB::ifRcvAddressEntry,,not-accessible,ifIndex:ifRcvAddressAddress,current,,A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex.
.1.3.6.1.2.1.31.1.4.1.1,IF-MIB::ifRcvAddressAddress,OCTET,not-accessible,,current,,An address for which the system will accept packets/frames on this entry's interface.
.1.3.6.1.2.1.31.1.4.1.2,IF-MIB::ifRcvAddressStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and delete rows in the ifRcvAddressTable.
.1.3.6.1.2.1.31.1.4.1.3,IF-MIB::ifRcvAddressType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3),This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(2) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart.
.1.3.6.1.2.1.31.1.5,IF-MIB::ifTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.6,IF-MIB::ifStackLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last change of the (whole) interface stack. A change of the interface stack is defined to be any creation, deletion, or change in value of any instance of ifStackStatus. If the interface stack has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.2,IF-MIB::ifConformance,,,,,,
.1.3.6.1.2.1.31.2.1,IF-MIB::ifGroups,,,,,,
.1.3.6.1.2.1.31.2.1.1,IF-MIB::ifGeneralGroup,,,,,,A collection of objects deprecated in favour of ifGeneralInformationGroup.
.1.3.6.1.2.1.31.2.1.2,IF-MIB::ifFixedLengthGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) character-oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.3,IF-MIB::ifHCFixedLengthGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) character- oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.4,IF-MIB::ifPacketGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.5,IF-MIB::ifHCPacketGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second but less than or equal to 650,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.6,IF-MIB::ifVHCPacketGroup,,,,,,A collection of objects providing information specific to higher speed (greater than 650,000,000 bits/second) packet- oriented network interfaces.
.1.3.6.1.2.1.31.2.1.7,IF-MIB::ifRcvAddressGroup,,,,,,A collection of objects providing information on the multiple addresses which an interface receives.
.1.3.6.1.2.1.31.2.1.8,IF-MIB::ifTestGroup,,,,,,A collection of objects providing the ability to invoke tests on an interface.
.1.3.6.1.2.1.31.2.1.9,IF-MIB::ifStackGroup,,,,,,The previous collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.10,IF-MIB::ifGeneralInformationGroup,,,,,,A collection of objects providing information applicable to all network interfaces.
.1.3.6.1.2.1.31.2.1.11,IF-MIB::ifStackGroup2,,,,,,A collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.12,IF-MIB::ifOldObjectsGroup,,,,,,The collection of objects deprecated from the original MIB- II interfaces group.
.1.3.6.1.2.1.31.2.1.13,IF-MIB::ifCounterDiscontinuityGroup,,,,,,A collection of objects providing information specific to interface counter discontinuities.
.1.3.6.1.2.1.31.2.1.14,IF-MIB::linkUpDownNotificationsGroup,,,,,,The notifications which indicate specific changes in the value of ifOperStatus.
.1.3.6.1.2.1.31.2.2,IF-MIB::ifCompliances,,,,,,
.1.3.6.1.2.1.31.2.2.1,IF-MIB::ifCompliance,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.2,IF-MIB::ifCompliance2,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.3,IF-MIB::ifCompliance3,,,,,,The compliance statement for SNMP entities which have network interfaces.
.1.3.6.1.2.1.72,IANA-ADDRESS-FAMILY-NUMBERS-MIB::ianaAddressFamilyNumbers,,,,,,The MIB module defines the AddressFamilyNumbers textual convention.
.1.3.6.1.3,SNMPv2-SMI::experimental,,,,,,
.1.3.6.1.4,SNMPv2-SMI::private,,,,,,
.1.3.6.1.4.1,SNMPv2-SMI::enterprises,,,,,,
.1.3.6.1.4.1.14823,ARUBA-MIB::aruba,,,,,,
.1.3.6.1.4.1.14823.1,ARUBA-MIB::products,,,,,,
.1.3.6.1.4.1.14823.1.1,ARUBA-MIB::switchProducts,,,,,,
.1.3.6.1.4.1.14823.1.1.1,ARUBA-MIB::a5000,,,,,,
.1.3.6.1.4.1.14823.1.1.2,ARUBA-MIB::a2400,,,,,,
.1.3.6.1.4.1.14823.1.1.3,ARUBA-MIB::a800,,,,,,
.1.3.6.1.4.1.14823.1.1.4,ARUBA-MIB::a6000,,,,,,
.1.3.6.1.4.1.14823.1.1.7,ARUBA-MIB::a2400E,,,,,,
.1.3.6.1.4.1.14823.1.1.8,ARUBA-MIB::a800E,,,,,,
.1.3.6.1.4.1.14823.1.1.9,ARUBA-MIB::a804,,,,,,
.1.3.6.1.4.1.14823.1.1.10,ARUBA-MIB::a200,,,,,,
.1.3.6.1.4.1.14823.1.1.11,ARUBA-MIB::a2424,,,,,,
.1.3.6.1.4.1.14823.1.1.12,ARUBA-MIB::a6000-SC3,,,,,,
.1.3.6.1.4.1.14823.1.1.13,ARUBA-MIB::a3200,,,,,,
.1.3.6.1.4.1.14823.1.1.14,ARUBA-MIB::a3200-8,,,,,,
.1.3.6.1.4.1.14823.1.1.15,ARUBA-MIB::a3400,,,,,,
.1.3.6.1.4.1.14823.1.1.16,ARUBA-MIB::a3400-32,,,,,,
.1.3.6.1.4.1.14823.1.1.17,ARUBA-MIB::a3600,,,,,,
.1.3.6.1.4.1.14823.1.1.18,ARUBA-MIB::a3600-64,,,,,,
.1.3.6.1.4.1.14823.1.1.19,ARUBA-MIB::a650,,,,,,
.1.3.6.1.4.1.14823.1.1.20,ARUBA-MIB::a651,,,,,,
.1.3.6.1.4.1.14823.1.1.21,ARUBA-MIB::reserved1,,,,,,
.1.3.6.1.4.1.14823.1.1.22,ARUBA-MIB::reserved2,,,,,,
.1.3.6.1.4.1.14823.1.1.23,ARUBA-MIB::a620,,,,,,
.1.3.6.1.4.1.14823.1.1.24,ARUBA-MIB::s3500-24P,,,,,,
.1.3.6.1.4.1.14823.1.1.25,ARUBA-MIB::s3500-24T,,,,,,
.1.3.6.1.4.1.14823.1.1.26,ARUBA-MIB::s3500-48P,,,,,,
.1.3.6.1.4.1.14823.1.1.27,ARUBA-MIB::s3500-48T,,,,,,
.1.3.6.1.4.1.14823.1.1.28,ARUBA-MIB::s2500-24P,,,,,,
.1.3.6.1.4.1.14823.1.1.29,ARUBA-MIB::s2500-24T,,,,,,
.1.3.6.1.4.1.14823.1.1.30,ARUBA-MIB::s2500-48P,,,,,,
.1.3.6.1.4.1.14823.1.1.31,ARUBA-MIB::s2500-48T,,,,,,
.1.3.6.1.4.1.14823.1.1.32,ARUBA-MIB::a7210,,,,,,
.1.3.6.1.4.1.14823.1.1.33,ARUBA-MIB::a7220,,,,,,
.1.3.6.1.4.1.14823.1.1.34,ARUBA-MIB::a7240,,,,,,
.1.3.6.1.4.1.14823.1.1.35,ARUBA-MIB::s3500-24F,,,,,,
.1.3.6.1.4.1.14823.1.1.36,ARUBA-MIB::s1500-48P,,,,,,
.1.3.6.1.4.1.14823.1.1.37,ARUBA-MIB::s1500-24P,,,,,,
.1.3.6.1.4.1.14823.1.1.38,ARUBA-MIB::s1500-12P,,,,,,
.1.3.6.1.4.1.14823.1.1.39,ARUBA-MIB::a7005,,,,,,
.1.3.6.1.4.1.14823.1.1.40,ARUBA-MIB::a7010,,,,,,
.1.3.6.1.4.1.14823.1.1.41,ARUBA-MIB::a7030,,,,,,
.1.3.6.1.4.1.14823.1.1.42,ARUBA-MIB::a7205,,,,,,
.1.3.6.1.4.1.14823.1.1.43,ARUBA-MIB::a7024,,,,,,
.1.3.6.1.4.1.14823.1.1.44,ARUBA-MIB::a7215,,,,,,
.1.3.6.1.4.1.14823.1.1.45,ARUBA-MIB::vmc-tact,,,,,,
.1.3.6.1.4.1.14823.1.1.46,ARUBA-MIB::vmc-sp10k,,,,,,
.1.3.6.1.4.1.14823.1.1.47,ARUBA-MIB::a7240xm,,,,,,
.1.3.6.1.4.1.14823.1.1.48,ARUBA-MIB::a7008,,,,,,
.1.3.6.1.4.1.14823.1.1.49,ARUBA-MIB::vmc-tact8,,,,,,
.1.3.6.1.4.1.14823.1.1.50,ARUBA-MIB::mm-va,,,,,,
.1.3.6.1.4.1.14823.1.1.51,ARUBA-MIB::a7280,,,,,,
.1.3.6.1.4.1.14823.1.1.52,ARUBA-MIB::mc-va,,,,,,
.1.3.6.1.4.1.14823.1.1.53,ARUBA-MIB::mm-hw-1K,,,,,,
.1.3.6.1.4.1.14823.1.1.54,ARUBA-MIB::mm-hw-5K,,,,,,
.1.3.6.1.4.1.14823.1.1.55,ARUBA-MIB::mm-hw-10K,,,,,,
.1.3.6.1.4.1.14823.1.1.56,ARUBA-MIB::a9004,,,,,,
.1.3.6.1.4.1.14823.1.1.57,ARUBA-MIB::a9012,,,,,,
.1.3.6.1.4.1.14823.1.1.58,ARUBA-MIB::a9004-lte,,,,,,
.1.3.6.1.4.1.14823.1.1.9999,ARUBA-MIB::aUndefined,,,,,,
.1.3.6.1.4.1.14823.1.2,ARUBA-MIB::apProducts,,,,,,
.1.3.6.1.4.1.14823.1.2.1,ARUBA-MIB::a50,,,,,,
.1.3.6.1.4.1.14823.1.2.2,ARUBA-MIB::a52,,,,,,
.1.3.6.1.4.1.14823.1.2.3,ARUBA-MIB::ap60,,,,,,
.1.3.6.1.4.1.14823.1.2.4,ARUBA-MIB::ap61,,,,,,
.1.3.6.1.4.1.14823.1.2.5,ARUBA-MIB::ap70,,,,,,
.1.3.6.1.4.1.14823.1.2.6,ARUBA-MIB::walljackAp61,,,,,,
.1.3.6.1.4.1.14823.1.2.7,ARUBA-MIB::a2E,,,,,,
.1.3.6.1.4.1.14823.1.2.8,ARUBA-MIB::ap1200,,,,,,
.1.3.6.1.4.1.14823.1.2.9,ARUBA-MIB::ap80s,,,,,,
.1.3.6.1.4.1.14823.1.2.10,ARUBA-MIB::ap80m,,,,,,
.1.3.6.1.4.1.14823.1.2.11,ARUBA-MIB::wg102,,,,,,
.1.3.6.1.4.1.14823.1.2.12,ARUBA-MIB::ap40,,,,,,
.1.3.6.1.4.1.14823.1.2.13,ARUBA-MIB::ap41,,,,,,
.1.3.6.1.4.1.14823.1.2.14,ARUBA-MIB::ap65,,,,,,
.1.3.6.1.4.1.14823.1.2.15,ARUBA-MIB::apMw1700,,,,,,
.1.3.6.1.4.1.14823.1.2.16,ARUBA-MIB::apDuowj,,,,,,
.1.3.6.1.4.1.14823.1.2.17,ARUBA-MIB::apDuo,,,,,,
.1.3.6.1.4.1.14823.1.2.18,ARUBA-MIB::ap80MB,,,,,,
.1.3.6.1.4.1.14823.1.2.19,ARUBA-MIB::ap80SB,,,,,,
.1.3.6.1.4.1.14823.1.2.20,ARUBA-MIB::ap85,,,,,,
.1.3.6.1.4.1.14823.1.2.21,ARUBA-MIB::ap124,,,,,,
.1.3.6.1.4.1.14823.1.2.22,ARUBA-MIB::ap125,,,,,,
.1.3.6.1.4.1.14823.1.2.23,ARUBA-MIB::ap120,,,,,,
.1.3.6.1.4.1.14823.1.2.24,ARUBA-MIB::ap121,,,,,,
.1.3.6.1.4.1.14823.1.2.25,ARUBA-MIB::ap1250,,,,,,
.1.3.6.1.4.1.14823.1.2.26,ARUBA-MIB::ap120abg,,,,,,
.1.3.6.1.4.1.14823.1.2.27,ARUBA-MIB::ap121abg,,,,,,
.1.3.6.1.4.1.14823.1.2.28,ARUBA-MIB::ap124abg,,,,,,
.1.3.6.1.4.1.14823.1.2.29,ARUBA-MIB::ap125abg,,,,,,
.1.3.6.1.4.1.14823.1.2.30,ARUBA-MIB::rap5wn,,,,,,
.1.3.6.1.4.1.14823.1.2.31,ARUBA-MIB::rap5,,,,,,
.1.3.6.1.4.1.14823.1.2.32,ARUBA-MIB::rap2wg,,,,,,
.1.3.6.1.4.1.14823.1.2.33,ARUBA-MIB::reserved4,,,,,,
.1.3.6.1.4.1.14823.1.2.34,ARUBA-MIB::ap105,,,,,,
.1.3.6.1.4.1.14823.1.2.35,ARUBA-MIB::ap65wb,,,,,,
.1.3.6.1.4.1.14823.1.2.36,ARUBA-MIB::ap651,,,,,,
.1.3.6.1.4.1.14823.1.2.37,ARUBA-MIB::reserved6,,,,,,
.1.3.6.1.4.1.14823.1.2.38,ARUBA-MIB::ap60p,,,,,,
.1.3.6.1.4.1.14823.1.2.39,ARUBA-MIB::reserved7,,,,,,
.1.3.6.1.4.1.14823.1.2.40,ARUBA-MIB::ap92,,,,,,
.1.3.6.1.4.1.14823.1.2.41,ARUBA-MIB::ap93,,,,,,
.1.3.6.1.4.1.14823.1.2.42,ARUBA-MIB::ap68,,,,,,
.1.3.6.1.4.1.14823.1.2.43,ARUBA-MIB::ap68p,,,,,,
.1.3.6.1.4.1.14823.1.2.44,ARUBA-MIB::ap175p,,,,,,
.1.3.6.1.4.1.14823.1.2.45,ARUBA-MIB::ap175ac,,,,,,
.1.3.6.1.4.1.14823.1.2.46,ARUBA-MIB::ap175dc,,,,,,
.1.3.6.1.4.1.14823.1.2.47,ARUBA-MIB::ap134,,,,,,
.1.3.6.1.4.1.14823.1.2.48,ARUBA-MIB::ap135,,,,,,
.1.3.6.1.4.1.14823.1.2.49,ARUBA-MIB::reserved8,,,,,,
.1.3.6.1.4.1.14823.1.2.50,ARUBA-MIB::ap93h,,,,,,
.1.3.6.1.4.1.14823.1.2.51,ARUBA-MIB::rap3wn,,,,,,
.1.3.6.1.4.1.14823.1.2.52,ARUBA-MIB::rap3wnp,,,,,,
.1.3.6.1.4.1.14823.1.2.53,ARUBA-MIB::ap104,,,,,,
.1.3.6.1.4.1.14823.1.2.54,ARUBA-MIB::rap155,,,,,,
.1.3.6.1.4.1.14823.1.2.55,ARUBA-MIB::rap155p,,,,,,
.1.3.6.1.4.1.14823.1.2.56,ARUBA-MIB::rap108,,,,,,
.1.3.6.1.4.1.14823.1.2.57,ARUBA-MIB::rap109,,,,,,
.1.3.6.1.4.1.14823.1.2.58,ARUBA-MIB::ap224,,,,,,
.1.3.6.1.4.1.14823.1.2.59,ARUBA-MIB::ap225,,,,,,
.1.3.6.1.4.1.14823.1.2.60,ARUBA-MIB::ap114,,,,,,
.1.3.6.1.4.1.14823.1.2.61,ARUBA-MIB::ap115,,,,,,
.1.3.6.1.4.1.14823.1.2.62,ARUBA-MIB::rap109L,,,,,,
.1.3.6.1.4.1.14823.1.2.63,ARUBA-MIB::ap274,,,,,,
.1.3.6.1.4.1.14823.1.2.64,ARUBA-MIB::ap275,,,,,,
.1.3.6.1.4.1.14823.1.2.65,ARUBA-MIB::ap214a,,,,,,
.1.3.6.1.4.1.14823.1.2.66,ARUBA-MIB::ap215a,,,,,,
.1.3.6.1.4.1.14823.1.2.67,ARUBA-MIB::ap204,,,,,,
.1.3.6.1.4.1.14823.1.2.68,ARUBA-MIB::ap205,,,,,,
.1.3.6.1.4.1.14823.1.2.69,ARUBA-MIB::ap103,,,,,,
.1.3.6.1.4.1.14823.1.2.70,ARUBA-MIB::ap103H,,,,,,
.1.3.6.1.4.1.14823.1.2.71,ARUBA-MIB::iapvc,,,,,,
.1.3.6.1.4.1.14823.1.2.72,ARUBA-MIB::ap277,,,,,,
.1.3.6.1.4.1.14823.1.2.73,ARUBA-MIB::ap214,,,,,,
.1.3.6.1.4.1.14823.1.2.74,ARUBA-MIB::ap215,,,,,,
.1.3.6.1.4.1.14823.1.2.75,ARUBA-MIB::ap228,,,,,,
.1.3.6.1.4.1.14823.1.2.76,ARUBA-MIB::ap205H,,,,,,
.1.3.6.1.4.1.14823.1.2.77,ARUBA-MIB::ap324,,,,,,
.1.3.6.1.4.1.14823.1.2.78,ARUBA-MIB::ap325,,,,,,
.1.3.6.1.4.1.14823.1.2.79,ARUBA-MIB::ap334,,,,,,
.1.3.6.1.4.1.14823.1.2.80,ARUBA-MIB::ap335,,,,,,
.1.3.6.1.4.1.14823.1.2.81,ARUBA-MIB::ap314,,,,,,
.1.3.6.1.4.1.14823.1.2.82,ARUBA-MIB::ap315,,,,,,
.1.3.6.1.4.1.14823.1.2.83,ARUBA-MIB::apm210,,,,,,
.1.3.6.1.4.1.14823.1.2.84,ARUBA-MIB::ap207,,,,,,
.1.3.6.1.4.1.14823.1.2.85,ARUBA-MIB::ap304,,,,,,
.1.3.6.1.4.1.14823.1.2.86,ARUBA-MIB::ap305,,,,,,
.1.3.6.1.4.1.14823.1.2.87,ARUBA-MIB::ap303h,,,,,,
.1.3.6.1.4.1.14823.1.2.88,ARUBA-MIB::ap365,,,,,,
.1.3.6.1.4.1.14823.1.2.89,ARUBA-MIB::ap367,,,,,,
.1.3.6.1.4.1.14823.1.2.90,ARUBA-MIB::ap203H,,,,,,
.1.3.6.1.4.1.14823.1.2.91,ARUBA-MIB::ap203R,,,,,,
.1.3.6.1.4.1.14823.1.2.92,ARUBA-MIB::ap203RP,,,,,,
.1.3.6.1.4.1.14823.1.2.93,ARUBA-MIB::ap344,,,,,,
.1.3.6.1.4.1.14823.1.2.94,ARUBA-MIB::ap345,,,,,,
.1.3.6.1.4.1.14823.1.2.95,ARUBA-MIB::ap374,,,,,,
.1.3.6.1.4.1.14823.1.2.96,ARUBA-MIB::ap375,,,,,,
.1.3.6.1.4.1.14823.1.2.97,ARUBA-MIB::ap377,,,,,,
.1.3.6.1.4.1.14823.1.2.98,ARUBA-MIB::ap318,,,,,,
.1.3.6.1.4.1.14823.1.2.99,ARUBA-MIB::ap303,,,,,,
.1.3.6.1.4.1.14823.1.2.100,ARUBA-MIB::ap555,,,,,,
.1.3.6.1.4.1.14823.1.2.101,ARUBA-MIB::ap534,,,,,,
.1.3.6.1.4.1.14823.1.2.102,ARUBA-MIB::ap535,,,,,,
.1.3.6.1.4.1.14823.1.2.104,ARUBA-MIB::ap387,,,,,,
.1.3.6.1.4.1.14823.1.2.105,ARUBA-MIB::ap303P,,,,,,
.1.3.6.1.4.1.14823.1.2.106,ARUBA-MIB::ap514,,,,,,
.1.3.6.1.4.1.14823.1.2.107,ARUBA-MIB::ap515,,,,,,
.1.3.6.1.4.1.14823.1.2.108,ARUBA-MIB::ap544,,,,,,
.1.3.6.1.4.1.14823.1.2.109,ARUBA-MIB::ap545,,,,,,
.1.3.6.1.4.1.14823.1.2.110,ARUBA-MIB::ap504,,,,,,
.1.3.6.1.4.1.14823.1.2.111,ARUBA-MIB::ap505,,,,,,
.1.3.6.1.4.1.14823.1.2.112,ARUBA-MIB::ap505H,,,,,,
.1.3.6.1.4.1.14823.1.2.113,ARUBA-MIB::ap574,,,,,,
.1.3.6.1.4.1.14823.1.2.114,ARUBA-MIB::ap575,,,,,,
.1.3.6.1.4.1.14823.1.2.115,ARUBA-MIB::ap577,,,,,,
.1.3.6.1.4.1.14823.1.2.116,ARUBA-MIB::ap518,,,,,,
.1.3.6.1.4.1.14823.1.2.117,ARUBA-MIB::ap503H,,,,,,
.1.3.6.1.4.1.14823.1.2.118,ARUBA-MIB::ap565,,,,,,
.1.3.6.1.4.1.14823.1.2.119,ARUBA-MIB::ap567,,,,,,
.1.3.6.1.4.1.14823.1.2.120,ARUBA-MIB::ap575EX,,,,,,
.1.3.6.1.4.1.14823.1.2.121,ARUBA-MIB::ap577EX,,,,,,
.1.3.6.1.4.1.14823.1.2.122,ARUBA-MIB::ap565EX,,,,,,
.1.3.6.1.4.1.14823.1.2.123,ARUBA-MIB::ap567EX,,,,,,
.1.3.6.1.4.1.14823.1.2.9999,ARUBA-MIB::apUndefined,,,,,,
.1.3.6.1.4.1.14823.1.3,ARUBA-MIB::emsProducts,,,,,,
.1.3.6.1.4.1.14823.1.4,ARUBA-MIB::partnerProducts,,,,,,
.1.3.6.1.4.1.14823.1.4.1,ARUBA-MIB::ecsE50,,,,,,
.1.3.6.1.4.1.14823.1.4.2,ARUBA-MIB::ecsE100C,,,,,,
.1.3.6.1.4.1.14823.1.4.3,ARUBA-MIB::ecsE100A,,,,,,
.1.3.6.1.4.1.14823.1.4.4,ARUBA-MIB::ecsENSM,,,,,,
.1.3.6.1.4.1.14823.1.5,ARUBA-MIB::amigopodProducts,,,,,,
.1.3.6.1.4.1.14823.2,ARUBA-MIB::arubaEnterpriseMibModules,,,,,,
.1.3.6.1.4.1.14823.2.1,ARUBA-MIB::common,,,,,,
.1.3.6.1.4.1.14823.2.1.1,ARUBA-MIB::arubaMIBModules,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1,ARUBA-VENDORTYPE::arubaVendorTypeMIB,,,,,,This module describes the object identifiers that are assigned to various components on aruba products.
.1.3.6.1.4.1.14823.2.1.1.1.1,ARUBA-VENDORTYPE::arubaVendorTypeMIBObjects,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1,ARUBA-VENDORTYPE::arubaSystem,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.1,ARUBA-VENDORTYPE::aSystemUnknown,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.2,ARUBA-VENDORTYPE::aSystemChassis,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.3,ARUBA-VENDORTYPE::aSystemBackplane,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.4,ARUBA-VENDORTYPE::aSystemModule,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.5,ARUBA-VENDORTYPE::aSystemPSU,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.6,ARUBA-VENDORTYPE::aSystemFAN,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.7,ARUBA-VENDORTYPE::aSystemContainer,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.8,ARUBA-VENDORTYPE::aSystemPort,,,,,,
.1.3.6.1.4.1.14823.2.1.1.1.1.1.9,ARUBA-VENDORTYPE::aSystemSensor,,,,,,
.1.3.6.1.4.1.14823.2.2,ARUBA-MIB::switch,,,,,,
.1.3.6.1.4.1.14823.2.2.1,ARUBA-MIB::wlsxEnterpriseMibModules,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1,WLSX-SWITCH-MIB::wlsxSwitchMIB,,,,,,This MIB module defines MIB objects which provide System level information about the Aruba switches.
.1.3.6.1.4.1.14823.2.2.1.1.1,WLSX-SWITCH-MIB::wlsxSystemXGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.1.1,WLSX-SWITCH-MIB::wlsxHostname,OCTET,read-only,,current,,Name of the switch.
.1.3.6.1.4.1.14823.2.2.1.1.1.2,WLSX-SWITCH-MIB::wlsxModelName,OCTET,read-only,,current,,Model Name of the switch.
.1.3.6.1.4.1.14823.2.2.1.1.1.3,WLSX-SWITCH-MIB::wlsxSwitchIp,IpAddress,read-only,,current,,Switch IP as configured by the user. This IP address uniquely 
.1.3.6.1.4.1.14823.2.2.1.1.1.4,WLSX-SWITCH-MIB::wlsxSwitchRole,INTEGER,read-only,,current,master(1):local(2):standbymaster(3),Role of this switch in the Switch Domain.
.1.3.6.1.4.1.14823.2.2.1.1.1.5,WLSX-SWITCH-MIB::wlsxSwitchMasterIp,IpAddress,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.6,WLSX-SWITCH-MIB::wlsxSwitchListTable,,not-accessible,,current,,This Table will list all the switches in the Switch Domain.
.1.3.6.1.4.1.14823.2.2.1.1.1.6.1,WLSX-SWITCH-MIB::wlsxSwitchListEntry,,not-accessible,switchListSwitchIPAddress,current,,Switch List Entry
.1.3.6.1.4.1.14823.2.2.1.1.1.6.1.1,WLSX-SWITCH-MIB::switchListSwitchIPAddress,IpAddress,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.6.1.2,WLSX-SWITCH-MIB::switchListSwitchRole,INTEGER,read-only,,current,master(1):local(2):standbymaster(3), 
.1.3.6.1.4.1.14823.2.2.1.1.1.7,WLSX-SWITCH-MIB::wlsxSwitchLicenseCount,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.8,WLSX-SWITCH-MIB::wlsxSwitchLicenseTable,,not-accessible,,current,,This table lists all licenses installed on the switch.
.1.3.6.1.4.1.14823.2.2.1.1.1.8.1,WLSX-SWITCH-MIB::wlsxLicenseEntry,,not-accessible,licenseIndex,current,,License Entry
.1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1,WLSX-SWITCH-MIB::licenseIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2,WLSX-SWITCH-MIB::licenseKey,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3,WLSX-SWITCH-MIB::licenseInstalled,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4,WLSX-SWITCH-MIB::licenseExpires,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5,WLSX-SWITCH-MIB::licenseFlags,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6,WLSX-SWITCH-MIB::licenseService,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.9,WLSX-SWITCH-MIB::wlsxSysXProcessorTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.9.1,WLSX-SWITCH-MIB::wlsxSysXProcessorEntry,,not-accessible,sysXProcessorID,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.9.1.1,WLSX-SWITCH-MIB::sysXProcessorID,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2,WLSX-SWITCH-MIB::sysXProcessorDescr,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3,WLSX-SWITCH-MIB::sysXProcessorLoad,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.10,WLSX-SWITCH-MIB::wlsxSysXStorageTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.10.1,WLSX-SWITCH-MIB::wlsxSysXStorageEntry,,not-accessible,sysXStorageIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1,WLSX-SWITCH-MIB::sysXStorageIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2,WLSX-SWITCH-MIB::sysXStorageType,INTEGER,read-only,,current,ram(1):flashMemory(2), 
.1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3,WLSX-SWITCH-MIB::sysXStorageSize,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.10.1.4,WLSX-SWITCH-MIB::sysXStorageUsed,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.10.1.5,WLSX-SWITCH-MIB::sysXStorageName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.11,WLSX-SWITCH-MIB::wlsxSysXMemoryTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.11.1,WLSX-SWITCH-MIB::wlsxSysXMemoryEntry,,not-accessible,sysXMemoryIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1,WLSX-SWITCH-MIB::sysXMemoryIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2,WLSX-SWITCH-MIB::sysXMemorySize,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3,WLSX-SWITCH-MIB::sysXMemoryUsed,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4,WLSX-SWITCH-MIB::sysXMemoryFree,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.1.12,WLSX-SWITCH-MIB::wlsxSwitchLicenseSerialNumber,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.2,WLSX-SWITCH-MIB::wlsxUserInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.2.1,WLSX-SWITCH-MIB::wlsxSwitchUserTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1,WLSX-SWITCH-MIB::wlsxSwitchUserEntry,,not-accessible,userIpAddress,current,,User Entry
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.1,WLSX-SWITCH-MIB::userIpAddress,IpAddress,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.2,WLSX-SWITCH-MIB::userPhyAddress,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.3,WLSX-SWITCH-MIB::userName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.4,WLSX-SWITCH-MIB::userRole,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.5,WLSX-SWITCH-MIB::userUpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.6,WLSX-SWITCH-MIB::userAuthenticationMethod,INTEGER,read-only,,current,none(1):other(2):web(3):dot1x(4):vpn(5):mac(6), 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.7,WLSX-SWITCH-MIB::userLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.8,WLSX-SWITCH-MIB::userServerName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.9,WLSX-SWITCH-MIB::userConnectedVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.10,WLSX-SWITCH-MIB::userConnectedSlot,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.11,WLSX-SWITCH-MIB::userConnectedPort,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.12,WLSX-SWITCH-MIB::userBWContractName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.13,WLSX-SWITCH-MIB::userBWContractUsage,INTEGER,read-only,,current,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.1.2.1.1.14,WLSX-SWITCH-MIB::userConnectedModule,Integer32,read-only,,current,, The module to which the user is connected, if wired. 
.1.3.6.1.4.1.14823.2.2.1.1.2.2,WLSX-SWITCH-MIB::wlsxSwitchStationMgmtTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1,WLSX-SWITCH-MIB::wlsxSwitchStationMgmtEntry,,not-accessible,staPhyAddress:staAccessPointBSSID,current,,Station Management Entry
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.1,WLSX-SWITCH-MIB::staPhyAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.2,WLSX-SWITCH-MIB::staAccessPointBSSID,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.3,WLSX-SWITCH-MIB::staUserName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.4,WLSX-SWITCH-MIB::staUserRole,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.5,WLSX-SWITCH-MIB::staAssociationID,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6,WLSX-SWITCH-MIB::staAccessPointESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7,WLSX-SWITCH-MIB::staSignalToNoiseRatio,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8,WLSX-SWITCH-MIB::staTransmitRate,INTEGER,read-only,,current,rate1Mbps(1):rate2Mbps(2):rate5point5Mbps(3):rate6Mbps(4):rate9Mbps(5):rate11Mbps(6):rate12Mbps(7):rate18Mbps(8):rate24Mbps(9):rate36Mbps(10):rate48Mbps(11):rate54Mbps(12), 
.1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9,WLSX-SWITCH-MIB::staReceiveRate,INTEGER,read-only,,current,rate1Mbps(1):rate2Mbps(2):rate5point5Mbps(3):rate6Mbps(4):rate9Mbps(5):rate11Mbps(6):rate12Mbps(7):rate18Mbps(8):rate24Mbps(9):rate36Mbps(10):rate48Mbps(11):rate54Mbps(12), 
.1.3.6.1.4.1.14823.2.2.1.1.2.3,WLSX-SWITCH-MIB::wlsxSwitchStationStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1,WLSX-SWITCH-MIB::wlsxSwitchStationStatsEntry,,not-accessible,staPhyAddress:staAccessPointBSSID,current,,Station Statistics Entry
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1,WLSX-SWITCH-MIB::staTxPackets,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2,WLSX-SWITCH-MIB::staTxBytes,Counter32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3,WLSX-SWITCH-MIB::staRxPackets,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4,WLSX-SWITCH-MIB::staRxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5,WLSX-SWITCH-MIB::staBwRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6,WLSX-SWITCH-MIB::staFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.7,WLSX-SWITCH-MIB::staFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.8,WLSX-SWITCH-MIB::staFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.9,WLSX-SWITCH-MIB::staFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.2.3.1.10,WLSX-SWITCH-MIB::staFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3,WLSX-SWITCH-MIB::wlsxAccessPointInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.3.1,WLSX-SWITCH-MIB::wlsxSwitchTotalNumAccessPoints,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.2,WLSX-SWITCH-MIB::wlsxSwitchTotalNumStationsAssociated,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3,WLSX-SWITCH-MIB::wlsxSwitchAccessPointTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1,WLSX-SWITCH-MIB::wlsxSwitchAccessPointEntry,,not-accessible,apBSSID,current,,Station Management Entry
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1,WLSX-SWITCH-MIB::apBSSID,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2,WLSX-SWITCH-MIB::apESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3,WLSX-SWITCH-MIB::apSlot,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4,WLSX-SWITCH-MIB::apPort,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5,WLSX-SWITCH-MIB::apIpAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6,WLSX-SWITCH-MIB::apPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3), 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7,WLSX-SWITCH-MIB::apType,INTEGER,read-only,,current,ap(1):am(2), 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8,WLSX-SWITCH-MIB::apCurrentChannel,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9,WLSX-SWITCH-MIB::apLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10,WLSX-SWITCH-MIB::apTotalTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11,WLSX-SWITCH-MIB::apInactiveTime,TimeTicks,read-only,,current,, Time since the Ap has been inactive  
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12,WLSX-SWITCH-MIB::apLoadBalancing,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13,WLSX-SWITCH-MIB::apChannelNoise,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14,WLSX-SWITCH-MIB::apSignalToNoiseRatio,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15,WLSX-SWITCH-MIB::apTransmitRate,INTEGER,read-only,,current,rate1Mbps(1):rate2Mbps(2):rate5point5Mbps(3):rate6Mbps(4):rate9Mbps(5):rate11Mbps(6):rate12Mbps(7):rate18Mbps(8):rate24Mbps(9):rate36Mbps(10):rate48Mbps(11):rate54Mbps(12), 
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16,WLSX-SWITCH-MIB::apReceiveRate,INTEGER,read-only,,current,rate1Mbps(1):rate2Mbps(2):rate5point5Mbps(3):rate6Mbps(4):rate9Mbps(5):rate11Mbps(6):rate12Mbps(7):rate18Mbps(8):rate24Mbps(9):rate36Mbps(10):rate48Mbps(11):rate54Mbps(12), 
.1.3.6.1.4.1.14823.2.2.1.1.3.4,WLSX-SWITCH-MIB::wlsxSwitchGlobalAPTable,,not-accessible,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1,WLSX-SWITCH-MIB::wlsxSwitchGlobalAPEntry,,not-accessible,globalAPLocation:globalAPAddress,deprecated,,Station Management Entry
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1,WLSX-SWITCH-MIB::globalAPLocation,OCTET,not-accessible,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2,WLSX-SWITCH-MIB::globalAPAddress,IpAddress,not-accessible,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3,WLSX-SWITCH-MIB::globalAPLocalSwitch,IpAddress,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4,WLSX-SWITCH-MIB::globalAPdot11aPhyAddr,OCTET,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5,WLSX-SWITCH-MIB::globalAPdot11bPhyAddr,OCTET,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6,WLSX-SWITCH-MIB::globalAPState,INTEGER,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7,WLSX-SWITCH-MIB::globalAPdot11gPhyAddr,OCTET,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5,WLSX-SWITCH-MIB::wlsxSwitchAccessPointStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1,WLSX-SWITCH-MIB::wlsxSwitchAccessPointStatsEntry,,not-accessible,apBSSID,current,,
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.1,WLSX-SWITCH-MIB::apStatsChannel,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2,WLSX-SWITCH-MIB::apChannelBwRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3,WLSX-SWITCH-MIB::apChannelFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4,WLSX-SWITCH-MIB::apChannelFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.5,WLSX-SWITCH-MIB::apChannelFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.6,WLSX-SWITCH-MIB::apChannelFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7,WLSX-SWITCH-MIB::apChannelFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8,WLSX-SWITCH-MIB::apBSSTxPackets,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9,WLSX-SWITCH-MIB::apBSSTxBytes,Counter32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10,WLSX-SWITCH-MIB::apBSSRxPackets,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11,WLSX-SWITCH-MIB::apBSSRxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12,WLSX-SWITCH-MIB::apBSSBwRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13,WLSX-SWITCH-MIB::apBSSFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14,WLSX-SWITCH-MIB::apBSSFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.15,WLSX-SWITCH-MIB::apBSSFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.16,WLSX-SWITCH-MIB::apBSSFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17,WLSX-SWITCH-MIB::apBSSFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4,WLSX-USER6-MIB::wlsxUser6InfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.4.1,WLSX-USER6-MIB::wlsxSwitchUser6Table,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1,WLSX-USER6-MIB::wlsxSwitchUser6Entry,,not-accessible,user6IpAddress,current,,User Entry
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.1,WLSX-USER6-MIB::user6IpAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.2,WLSX-USER6-MIB::user6PhyAddress,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.3,WLSX-USER6-MIB::user6Name,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.4,WLSX-USER6-MIB::user6Role,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.5,WLSX-USER6-MIB::user6UpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.6,WLSX-USER6-MIB::user6AuthenticationMethod,INTEGER,read-only,,current,none(1):other(2):web(3):dot1x(4):vpn(5):mac(6), 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.7,WLSX-USER6-MIB::user6Location,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.8,WLSX-USER6-MIB::user6ServerName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.9,WLSX-USER6-MIB::user6ConnectedVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.10,WLSX-USER6-MIB::user6ConnectedSlot,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.11,WLSX-USER6-MIB::user6ConnectedPort,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.12,WLSX-USER6-MIB::user6BWContractName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.13,WLSX-USER6-MIB::user6BWContractUsage,INTEGER,read-only,,current,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.1.4.1.1.14,WLSX-USER6-MIB::user6ConnectedModule,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100,WLSX-SWITCH-MIB::wlsxSwitchTraps,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.100,WLSX-SWITCH-MIB::wlsxSwitchTrapObjectsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.100.1,WLSX-SWITCH-MIB::wlsxAuthServerName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.2,WLSX-SWITCH-MIB::wlsxAuthServerTimeout,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.4,WLSX-SWITCH-MIB::wlsxFanNumber,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.5,WLSX-SWITCH-MIB::wlsxLineCardNumber,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.6,WLSX-SWITCH-MIB::wlsxVoltageType,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.7,WLSX-SWITCH-MIB::wlsxVoltageValue,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.8,WLSX-SWITCH-MIB::wlsxTemperatureValue,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.9,WLSX-SWITCH-MIB::wlsxProcessName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.10,WLSX-SWITCH-MIB::wlsxStationMacAddress,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.11,WLSX-SWITCH-MIB::wlsxStationBlackListReason,INTEGER,read-only,,current,userDefined(1):mitmAttack(2):authFailure(3):pingFlood(4):sessionFlood(5):synFlood(6):sessionBlacklist(7):ipSpoofing(8):other(100), 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.12,WLSX-SWITCH-MIB::wlsxSpoofedIpAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.13,WLSX-SWITCH-MIB::wlsxSpoofedOldPhyAddress,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.14,WLSX-SWITCH-MIB::wlsxSpoofedNewPhyAddress,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.15,WLSX-SWITCH-MIB::wlsxDBName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.16,WLSX-SWITCH-MIB::wlsxDBUserName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.17,WLSX-SWITCH-MIB::wlsxDBIpAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.18,WLSX-SWITCH-MIB::wlsxDBType,INTEGER,read-only,,current,mssql(1):mysql(2), 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.19,WLSX-SWITCH-MIB::wlsxVrID,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.20,WLSX-SWITCH-MIB::wlsxVrMasterIp,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.21,WLSX-SWITCH-MIB::wlsxVrrpOperState,INTEGER,read-only,,current,initialize(1):backup(2):master(3), 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.22,WLSX-SWITCH-MIB::wlsxApTxPower,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.23,WLSX-SWITCH-MIB::wlsxESIServerGrpName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.24,WLSX-SWITCH-MIB::wlsxESIServerName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.25,WLSX-SWITCH-MIB::wlsxESIServerIpaddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.26,WLSX-SWITCH-MIB::wlsxLicenseDaysRemaining,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.100.27,WLSX-SWITCH-MIB::wlsxSlotNumber,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.1.100.1001,WLSX-SWITCH-MIB::wlsxSwitchIPChanged,,,,,,A trap which indicates that the switch IP address has changed.
.1.3.6.1.4.1.14823.2.2.1.1.100.1002,WLSX-SWITCH-MIB::wlsxSwitchRoleChange,,,,,,A trap which indicates that the role of the switch has changed in 
.1.3.6.1.4.1.14823.2.2.1.1.100.1003,WLSX-SWITCH-MIB::wlsxUserEntryCreated,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1004,WLSX-SWITCH-MIB::wlsxUserEntryDeleted,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1005,WLSX-SWITCH-MIB::wlsxUserEntryAuthenticated,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1006,WLSX-SWITCH-MIB::wlsxUserEntryDeAuthenticated,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1007,WLSX-SWITCH-MIB::wlsxUserAuthenticationFailed,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1008,WLSX-SWITCH-MIB::wlsxAuthServerReqTimedOut,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1009,WLSX-SWITCH-MIB::wlsxAuthServerTimedOut,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1010,WLSX-SWITCH-MIB::wlsxAuthServerIsUp,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1011,WLSX-SWITCH-MIB::wlsxAuthMaxUserEntries,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1012,WLSX-SWITCH-MIB::wlsxAuthMaxAclEntries,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1013,WLSX-SWITCH-MIB::wlsxAuthMaxBWContracts,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1014,WLSX-SWITCH-MIB::wlsxPowerSupplyFailure,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1015,WLSX-SWITCH-MIB::wlsxFanFailure,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1016,WLSX-SWITCH-MIB::wlsxOutOfRangeVoltage,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1017,WLSX-SWITCH-MIB::wlsxOutOfRangeTemperature,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1018,WLSX-SWITCH-MIB::wlsxLCInserted,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1019,WLSX-SWITCH-MIB::wlsxSCInserted,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1020,WLSX-SWITCH-MIB::wlsxGBICInserted,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1021,WLSX-SWITCH-MIB::wlsxProcessDied,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1022,WLSX-SWITCH-MIB::wlsxProcessExceedsMemoryLimits,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1023,WLSX-SWITCH-MIB::wlsxLowOnFlashSpace,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1024,WLSX-SWITCH-MIB::wlsxLowMemory,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1025,WLSX-SWITCH-MIB::wlsxFanTrayRemoved,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1026,WLSX-SWITCH-MIB::wlsxFanTrayInserted,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1027,WLSX-SWITCH-MIB::wlsxLCRemoved,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1028,WLSX-SWITCH-MIB::wlsxSCRemoved,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1029,WLSX-SWITCH-MIB::wlsxPowerSupplyMissing,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1030,WLSX-SWITCH-MIB::wlsxAccessPointIsUp,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1031,WLSX-SWITCH-MIB::wlsxAccessPointIsDown,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1032,WLSX-SWITCH-MIB::wlsxCoverageHoleDetected,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1033,WLSX-SWITCH-MIB::wlsxChannelChanged,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1034,WLSX-SWITCH-MIB::wlsxStationAddedToBlackList,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1035,WLSX-SWITCH-MIB::wlsxStationRemovedFromBlackList,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1036,WLSX-SWITCH-MIB::wlsxIpSpoofingDetected,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1037,WLSX-SWITCH-MIB::wlsxDBCommunicationFailure,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1038,WLSX-SWITCH-MIB::wlsxVrrpStateChange,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1039,WLSX-SWITCH-MIB::wlsxAPRadioAttributesChanged,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1040,WLSX-SWITCH-MIB::wlsxESIServerUp,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1041,WLSX-SWITCH-MIB::wlsxESIServerDown,,,,,,
.1.3.6.1.4.1.14823.2.2.1.1.100.1042,WLSX-SWITCH-MIB::wlsxLicenseExpiry,,,,,,
.1.3.6.1.4.1.14823.2.2.1.2,WLSX-SYSTEMEXT-MIB::wlsxSystemExtMIB,,,,,,This MIB module defines MIB objects which provide System level information about the Aruba controller.
.1.3.6.1.4.1.14823.2.2.1.2.1,WLSX-SYSTEMEXT-MIB::wlsxSystemExtGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.2.1.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchIp,IpAddress,read-only,,current,,Controller IP as configured by the user. This IP address uniquely 
.1.3.6.1.4.1.14823.2.2.1.2.1.2,WLSX-SYSTEMEXT-MIB::wlsxSysExtHostname,OCTET,read-only,,current,,Name of the controller.
.1.3.6.1.4.1.14823.2.2.1.2.1.3,WLSX-SYSTEMEXT-MIB::wlsxSysExtModelName,OCTET,read-only,,current,,Model Name of the controller.
.1.3.6.1.4.1.14823.2.2.1.2.1.4,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchRole,INTEGER,read-only,,current,master(1):local(2):backupmaster(3),Role of this controller in the Aruba Domain.
.1.3.6.1.4.1.14823.2.2.1.2.1.5,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchMasterIp,IpAddress,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.6,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchDate,OCTET,read-write,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.7,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchBaseMacaddress,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.8,WLSX-SYSTEMEXT-MIB::wlsxSysExtFanTrayAssemblyNumber,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.9,WLSX-SYSTEMEXT-MIB::wlsxSysExtFanTraySerialNumber,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.10,WLSX-SYSTEMEXT-MIB::wlsxSysExtInternalTemparature,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.11,WLSX-SYSTEMEXT-MIB::wlsxSysExtLicenseSerialNumber,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.12,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchLicenseCount,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.13,WLSX-SYSTEMEXT-MIB::wlsxSysExtProcessorTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.13.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtProcessorEntry,,not-accessible,sysExtProcessorID,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.13.1.1,WLSX-SYSTEMEXT-MIB::sysExtProcessorID,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.13.1.2,WLSX-SYSTEMEXT-MIB::sysExtProcessorDescr,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.13.1.3,WLSX-SYSTEMEXT-MIB::sysExtProcessorLoad,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.14,WLSX-SYSTEMEXT-MIB::wlsxSysExtStorageTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.14.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtStorageEntry,,not-accessible,sysExtStorageIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.14.1.1,WLSX-SYSTEMEXT-MIB::sysExtStorageIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.14.1.2,WLSX-SYSTEMEXT-MIB::sysExtStorageType,INTEGER,read-only,,current,ram(1):flashMemory(2), 
.1.3.6.1.4.1.14823.2.2.1.2.1.14.1.3,WLSX-SYSTEMEXT-MIB::sysExtStorageSize,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.14.1.4,WLSX-SYSTEMEXT-MIB::sysExtStorageUsed,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.14.1.5,WLSX-SYSTEMEXT-MIB::sysExtStorageName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.15,WLSX-SYSTEMEXT-MIB::wlsxSysExtMemoryTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.15.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtMemoryEntry,,not-accessible,sysExtMemoryIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.15.1.1,WLSX-SYSTEMEXT-MIB::sysExtMemoryIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.15.1.2,WLSX-SYSTEMEXT-MIB::sysExtMemorySize,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.15.1.3,WLSX-SYSTEMEXT-MIB::sysExtMemoryUsed,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.15.1.4,WLSX-SYSTEMEXT-MIB::sysExtMemoryFree,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16,WLSX-SYSTEMEXT-MIB::wlsxSysExtCardTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtCardEntry,,not-accessible,sysExtCardSlot,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.1,WLSX-SYSTEMEXT-MIB::sysExtCardSlot,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.2,WLSX-SYSTEMEXT-MIB::sysExtCardType,INTEGER,read-only,,current,lc1(1):lc2(2):sc1(3):sc2(4):sw2400(5):sw800(6):sw200(7):m3mk1(8):sw3200(9):sw3400(10):sw3600(11):sw650(12):sw651(13):reserved1(14):reserved2(15):sw620(16):sw7210(17):sw7220(18):sw7240(19):sw3500(20):sw2500(21):sw1500(22):sw7010(23):sw7005(24):sw7030(25):sw7110(26), 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.3,WLSX-SYSTEMEXT-MIB::sysExtCardNumOfPorts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.4,WLSX-SYSTEMEXT-MIB::sysExtCardNumOfFastethernetPorts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.5,WLSX-SYSTEMEXT-MIB::sysExtCardNumOfGigPorts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.6,WLSX-SYSTEMEXT-MIB::sysExtCardSerialNo,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.7,WLSX-SYSTEMEXT-MIB::sysExtCardAssemblyNo,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.8,WLSX-SYSTEMEXT-MIB::sysExtCardManufacturingDate,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.9,WLSX-SYSTEMEXT-MIB::sysExtCardHwRevision,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.10,WLSX-SYSTEMEXT-MIB::sysExtCardFpgaRevision,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.11,WLSX-SYSTEMEXT-MIB::sysExtCardSwitchChip,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.12,WLSX-SYSTEMEXT-MIB::sysExtCardStatus,INTEGER,read-only,,current,active(1):inactive(2), 
.1.3.6.1.4.1.14823.2.2.1.2.1.16.1.13,WLSX-SYSTEMEXT-MIB::sysExtCardUserSlot,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.17,WLSX-SYSTEMEXT-MIB::wlsxSysExtFanTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.17.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtFanEntry,,not-accessible,sysExtFanIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.17.1.1,WLSX-SYSTEMEXT-MIB::sysExtFanIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.17.1.2,WLSX-SYSTEMEXT-MIB::sysExtFanStatus,INTEGER,read-only,,current,active(1):inactive(2), 
.1.3.6.1.4.1.14823.2.2.1.2.1.18,WLSX-SYSTEMEXT-MIB::wlsxSysExtPowerSupplyTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.18.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtPowerSupplyEntry,,not-accessible,sysExtPowerSupplyIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.18.1.1,WLSX-SYSTEMEXT-MIB::sysExtPowerSupplyIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.18.1.2,WLSX-SYSTEMEXT-MIB::sysExtPowerSupplyStatus,INTEGER,read-only,,current,active(1):inactive(2), 
.1.3.6.1.4.1.14823.2.2.1.2.1.19,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchListTable,,not-accessible,,current,,This Table will list all the controllers in the Aruba Domain.
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchListEntry,,not-accessible,sysExtSwitchIPAddress,current,,Switch List Entry
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1.1,WLSX-SYSTEMEXT-MIB::sysExtSwitchIPAddress,IpAddress,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1.2,WLSX-SYSTEMEXT-MIB::sysExtSwitchRole,INTEGER,read-only,,current,master(1):local(2):backupmaster(3), 
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1.3,WLSX-SYSTEMEXT-MIB::sysExtSwitchLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1.4,WLSX-SYSTEMEXT-MIB::sysExtSwitchSWVersion,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1.5,WLSX-SYSTEMEXT-MIB::sysExtSwitchStatus,INTEGER,read-only,,current,active(1):inactive(2), 
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1.6,WLSX-SYSTEMEXT-MIB::sysExtSwitchName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.19.1.7,WLSX-SYSTEMEXT-MIB::sysExtSwitchSerNo,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.20,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchLicenseTable,,not-accessible,,current,,This table lists all licenses installed on the controller.
.1.3.6.1.4.1.14823.2.2.1.2.1.20.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtLicenseEntry,,not-accessible,sysExtLicenseIndex,current,,License Entry
.1.3.6.1.4.1.14823.2.2.1.2.1.20.1.1,WLSX-SYSTEMEXT-MIB::sysExtLicenseIndex,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.20.1.2,WLSX-SYSTEMEXT-MIB::sysExtLicenseKey,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.20.1.3,WLSX-SYSTEMEXT-MIB::sysExtLicenseInstalled,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.20.1.4,WLSX-SYSTEMEXT-MIB::sysExtLicenseExpires,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.20.1.5,WLSX-SYSTEMEXT-MIB::sysExtLicenseFlags,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.20.1.6,WLSX-SYSTEMEXT-MIB::sysExtLicenseService,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.2.1.21,WLSX-SYSTEMEXT-MIB::wlsxSysExtMMSCompatLevel,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.22,WLSX-SYSTEMEXT-MIB::wlsxSysExtMMSConfigID,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.23,WLSX-SYSTEMEXT-MIB::wlsxSysExtControllerConfigID,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.24,WLSX-SYSTEMEXT-MIB::wlsxSysExtIsMMSConfigUpdateEnabled,INTEGER,read-write,,current,true(1):false(2),
.1.3.6.1.4.1.14823.2.2.1.2.1.25,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchLastReload,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.26,WLSX-SYSTEMEXT-MIB::wlsxSysExtLastStatsReset,TimeTicks,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.2.1.27,WLSX-SYSTEMEXT-MIB::wlsxSysExtHwVersion,OCTET,read-only,,current,,Hardware version of the switch.
.1.3.6.1.4.1.14823.2.2.1.2.1.28,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwVersion,OCTET,read-only,,current,,Software version of the switch.
.1.3.6.1.4.1.14823.2.2.1.2.1.29,WLSX-SYSTEMEXT-MIB::wlsxSysExtSerialNumber,OCTET,read-only,,current,,The serial number of the switch.
.1.3.6.1.4.1.14823.2.2.1.2.1.30,WLSX-SYSTEMEXT-MIB::wlsxSysExtCpuUsedPercent,Gauge32,read-only,,current,,The CPU used percent of the switch
.1.3.6.1.4.1.14823.2.2.1.2.1.31,WLSX-SYSTEMEXT-MIB::wlsxSysExtMemoryUsedPercent,Gauge32,read-only,,current,,The memory used percent of the switch
.1.3.6.1.4.1.14823.2.2.1.2.1.32,WLSX-SYSTEMEXT-MIB::wlsxSysExtPacketLossPercent,Integer32,read-only,,current,,The packet loss count of the switch
.1.3.6.1.4.1.14823.2.2.1.2.2,WLSX-SYSTEMEXT-MIB::wlsxSystemExtTableGenNumberGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.2.2.1,WLSX-SYSTEMEXT-MIB::wlsxSysExtUserTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.2,WLSX-SYSTEMEXT-MIB::wlsxSysExtAPBssidTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.3,WLSX-SYSTEMEXT-MIB::wlsxSysExtAPRadioTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.4,WLSX-SYSTEMEXT-MIB::wlsxSysExtAPTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.5,WLSX-SYSTEMEXT-MIB::wlsxSysExtSwitchListTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.6,WLSX-SYSTEMEXT-MIB::wlsxSysExtPortTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.7,WLSX-SYSTEMEXT-MIB::wlsxSysExtVlanTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.8,WLSX-SYSTEMEXT-MIB::wlsxSysExtVlanInterfaceTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.9,WLSX-SYSTEMEXT-MIB::wlsxSysExtLicenseTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.10,WLSX-SYSTEMEXT-MIB::wlsxSysExtMonAPTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.2.2.11,WLSX-SYSTEMEXT-MIB::wlsxSysExtMonStationTableGenNumber,Integer32,read-only,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.3,WLSX-IFEXT-MIB::wlsxIfExtMIB,,,,,,This MIB module defines MIB objects which provide System level information about the Aruba controller.
.1.3.6.1.4.1.14823.2.2.1.3.1,WLSX-IFEXT-MIB::wlsxIfExtGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.3.1.1,WLSX-IFEXT-MIB::wlsxIfExtPortTable,,not-accessible,,deprecated,, deprecated in favor of wlsxIfExtNPortTable.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1,WLSX-IFEXT-MIB::wlsxIfExtPortEntry,,not-accessible,ifExtSlotNumber:ifExtPortNumber,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.1,WLSX-IFEXT-MIB::ifExtSlotNumber,Integer32,not-accessible,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.2,WLSX-IFEXT-MIB::ifExtPortNumber,Integer32,not-accessible,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.3,WLSX-IFEXT-MIB::ifExtPortIfIndex,Integer32,read-only,,deprecated,, This object is deprecated in favour of ifExtNPortIfIndex. 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.4,WLSX-IFEXT-MIB::ifExtAdminState,INTEGER,read-write,,deprecated,enabled(1):disabled(2), favour of ifExtNAdminState.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.5,WLSX-IFEXT-MIB::ifExtOperState,INTEGER,read-only,,deprecated,up(1):down(2):testing(3), deprecated in favour of ifExtNOperState.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.6,WLSX-IFEXT-MIB::ifExtPoeState,INTEGER,read-write,,deprecated,disabled(1):enabled(2):enabledCisco(3):notAvailable(4),
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.7,WLSX-IFEXT-MIB::ifExtIsTrusted,INTEGER,read-write,,deprecated,true(1):false(2), of ifExtNIsTrusted.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.8,WLSX-IFEXT-MIB::ifExtDot1DState,INTEGER,read-write,,deprecated,disabled(1):blocked(2):listening(3):learning(4):forwarding(5), This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNDot1DState.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.9,WLSX-IFEXT-MIB::ifExtMode,INTEGER,read-write,,deprecated,access(1):dot1q(2), This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNMode.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.10,WLSX-IFEXT-MIB::ifExtAccessVlanId,INTEGER,read-write,,deprecated,, default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNAccessVlanId.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.11,WLSX-IFEXT-MIB::ifExtTrunkNativeVlanId,INTEGER,read-write,,deprecated,, object provides default switch port value if ifExtIsMonitoring is true(1).  This object is deprecated in favour of ifExtNTrunkNativeVlanId.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.12,WLSX-IFEXT-MIB::ifExtTrunkIsAllowedAll,INTEGER,read-write,,deprecated,true(1):false(2), provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNTrunkIsAllowedAll.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.13,WLSX-IFEXT-MIB::ifExtTrunkAllowedVlanList,OCTET,read-write,,deprecated,, This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNTrunkAllowedVlanList.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.14,WLSX-IFEXT-MIB::ifExtIngressACLName,OCTET,read-write,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.15,WLSX-IFEXT-MIB::ifExtEgressACLName,OCTET,read-write,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.16,WLSX-IFEXT-MIB::ifExtSessionACLName,OCTET,read-write,,deprecated,,
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.17,WLSX-IFEXT-MIB::ifExtXsecVlan,INTEGER,read-write,,deprecated,, deprecated in favour of ifExtNXsecVlan.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.18,WLSX-IFEXT-MIB::ifExtIsMonitoring,INTEGER,read-write,,deprecated,true(1):false(2), When the value of this object is true(1), then below objects provide default switch port values configured on this port. ifExtMode, ifExtAccessVlanId, ifExtTrunkNativeVlanId, ifExtTrunkIsAllowedAll, ifExtTrunkAllowedVlanList This object is deprecated in favour of ifExtNIsMonitoring.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.19,WLSX-IFEXT-MIB::ifExtIsMux,INTEGER,read-write,,deprecated,true(1):false(2), is deprecated in favour of ifExtNIsMux.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.20,WLSX-IFEXT-MIB::ifExtUserSlotNumber,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.21,WLSX-IFEXT-MIB::ifExtUserPortNumber,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.22,WLSX-IFEXT-MIB::ifExtPortSpeed,INTEGER,read-only,,deprecated,speed10Mbps(1):speed100Mbps(2):speed1000Mbps(3):speedAuto(4):speed10Gbps(5), ifExtNPortSpeed. 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.23,WLSX-IFEXT-MIB::ifExtPortDuplex,INTEGER,read-only,,deprecated,half(1):full(2):auto(3), ifExtNPortDuplex.
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.24,WLSX-IFEXT-MIB::ifExtPortType,INTEGER,read-only,,deprecated,fastethernet(1):gigabitethernet(2):xgigabitethernet(3), ifExtNPortType. 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.25,WLSX-IFEXT-MIB::ifExtDescr,OCTET,read-only,,deprecated,, ifExtNDescr. 
.1.3.6.1.4.1.14823.2.2.1.3.1.1.1.26,WLSX-IFEXT-MIB::ifExtUserModuleNumber,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.3.1.2,WLSX-IFEXT-MIB::wlsxIfExtVlanTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.2.1,WLSX-IFEXT-MIB::wlsxIfExtVlanEntry,,not-accessible,ifExtVlanId,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.2.1.1,WLSX-IFEXT-MIB::ifExtVlanId,INTEGER,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.3.1.2.1.2,WLSX-IFEXT-MIB::ifExtVlanName,OCTET,read-create,,current,, 
.1.3.6.1.4.1.14823.2.2.1.3.1.2.1.3,WLSX-IFEXT-MIB::ifExtVlanStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.14823.2.2.1.3.1.3,WLSX-IFEXT-MIB::wlsxIfExtVlanMemberTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.3.1,WLSX-IFEXT-MIB::wlsxIfExtVlanMemberEntry,,not-accessible,ifExtVlanId:ifIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.3.1.1,WLSX-IFEXT-MIB::ifExtVlanMemberStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.14823.2.2.1.3.1.3.1.2,WLSX-IFEXT-MIB::ifExtVlanMemberSlot,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.3.1.3,WLSX-IFEXT-MIB::ifExtVlanMemberPort,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.3.1.4,WLSX-IFEXT-MIB::ifExtVlanMemberType,INTEGER,read-only,,current,port(1):vlan(2):tunnel(3):loopback(4),
.1.3.6.1.4.1.14823.2.2.1.3.1.4,WLSX-IFEXT-MIB::wlsxIfExtVlanInterfaceTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1,WLSX-IFEXT-MIB::wlsxIfExtVlanInterfaceEntry,,not-accessible,ifExtVlanId,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.1,WLSX-IFEXT-MIB::ifExtVlanInterfaceIfIndex,Integer32,read-create,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.2,WLSX-IFEXT-MIB::ifExtVlanInterfaceDescription,OCTET,read-create,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.3,WLSX-IFEXT-MIB::ifExtVlanInterfaceBWContract,OCTET,read-create,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.4,WLSX-IFEXT-MIB::ifExtVlanInterfaceAdminState,INTEGER,read-create,,current,enabled(1):disabled(2),
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.5,WLSX-IFEXT-MIB::ifExtVlanInterfaceOperState,INTEGER,read-create,,current,up(1):down(2):testing(3),
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.6,WLSX-IFEXT-MIB::ifExtVlanInterfaceIpAddress,IpAddress,read-create,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.7,WLSX-IFEXT-MIB::ifExtVlanInterfaceIpMask,IpAddress,read-create,,current,,
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.8,WLSX-IFEXT-MIB::ifExtVlanInterfaceIsLocalArp,INTEGER,read-create,,current,enabled(1):disabled(2),
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.9,WLSX-IFEXT-MIB::ifExtVlanInterfaceStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.10,WLSX-IFEXT-MIB::ifExtVlanInterfaceIpRouting,INTEGER,read-create,,current,enabled(1):disabled(2),
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.11,WLSX-IFEXT-MIB::ifExtVlanInterfaceIpNatInside,INTEGER,read-create,,current,enabled(1):disabled(2),
.1.3.6.1.4.1.14823.2.2.1.3.1.4.1.12,WLSX-IFEXT-MIB::ifExtVlanInterfaceIpIgmpSnooping,INTEGER,read-create,,current,enabled(1):disabled(2),
.1.3.6.1.4.1.14823.2.2.1.3.1.5,WLSX-IFEXT-MIB::wlsxIfExtNPortTable,,not-accessible,,current,, The table of interface details. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1,WLSX-IFEXT-MIB::wlsxIfExtNPortEntry,,not-accessible,ifExtNSlotNumber:ifExtNModuleNumber:ifExtNPortNumber,current,, An entry in wlsxIfExtNPortTable. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.1,WLSX-IFEXT-MIB::ifExtNSlotNumber,Integer32,not-accessible,,current,, This object represents the user-visible (zero-based) Physical Slot of the Interface. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.2,WLSX-IFEXT-MIB::ifExtNModuleNumber,Integer32,not-accessible,,current,, This object represents the user-visible (zero-based) Physical Module of the Interface. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.3,WLSX-IFEXT-MIB::ifExtNPortNumber,Integer32,not-accessible,,current,, This object represents the user-visible (zero-based) Physical Port of the Interface. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.4,WLSX-IFEXT-MIB::ifExtNPortIfIndex,Integer32,read-only,,current,, This is the ifIndex in ifTable, representing this slot, module and port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.5,WLSX-IFEXT-MIB::ifExtNAdminState,INTEGER,read-write,,current,enabled(1):disabled(2), The desired state of the interface. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.6,WLSX-IFEXT-MIB::ifExtNOperState,INTEGER,read-only,,current,up(1):down(2):testing(3), The current operational state of the interface. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.7,WLSX-IFEXT-MIB::ifExtNPoeState,INTEGER,read-write,,current,disabled(1):enabled(2):enabledCisco(3):notAvailable(4), The current state of the power over ethernet capability of the port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.8,WLSX-IFEXT-MIB::ifExtNIsTrusted,INTEGER,read-write,,current,true(1):false(2), The object indicates if the port is used in the trusted side of the network or the untrusted side. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.9,WLSX-IFEXT-MIB::ifExtNDot1DState,INTEGER,read-write,,current,disabled(1):blocked(2):listening(3):learning(4):forwarding(5), Current Dot1d state of the Port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.10,WLSX-IFEXT-MIB::ifExtNMode,INTEGER,read-write,,current,access(1):dot1q(2), This object indicates if the port is in a Trunk mode or access mode. This object provides default switch port value if ifExtIsMonitoring is true(1). 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.11,WLSX-IFEXT-MIB::ifExtNAccessVlanId,INTEGER,read-write,,current,, The VLAN Id when the port is in Access Mode. This object provides  default switch port value if ifExtIsMonitoring is true(1). 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.12,WLSX-IFEXT-MIB::ifExtNTrunkNativeVlanId,INTEGER,read-write,,current,, The native VLAN Id of the Port, when the port is in dot1q mode. This object provides default switch port value if ifExtIsMonitoring is true(1). 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.13,WLSX-IFEXT-MIB::ifExtNTrunkIsAllowedAll,INTEGER,read-write,,current,true(1):false(2), When the mode of the port is Trunk, this Object indicates if the port is part of all the configured Vlans. This object provides default switch port value if ifExtIsMonitoring is true(1). 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.14,WLSX-IFEXT-MIB::ifExtNTrunkAllowedVlanList,OCTET,read-write,,current,, A string of octets containing one bit per VLAN for a total of 4096 VLANs in the management domain. The most significant bit of the octet string is the lowest value VLAN of 4096 VLANs. By setting the bit(1) we indicate that the vlan is part of the interface. The most significant bit of the bitmap is transmitted first. Note that if the length of this string is less than 512 octets, any 'missing' octets are assumed to contain the value zero. This object provides default switch port value if ifExtIsMonitoring is true(1). 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.15,WLSX-IFEXT-MIB::ifExtNIngressACLName,OCTET,read-write,,current,, This object represents the Ingress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.16,WLSX-IFEXT-MIB::ifExtNEgressACLName,OCTET,read-write,,current,, This object represents the Egress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.17,WLSX-IFEXT-MIB::ifExtNSessionACLName,OCTET,read-write,,current,, This object represents the Session ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.18,WLSX-IFEXT-MIB::ifExtNXsecVlan,INTEGER,read-write,,current,, This object indicates if the port is an Xsec Port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.19,WLSX-IFEXT-MIB::ifExtNIsMonitoring,INTEGER,read-write,,current,true(1):false(2), This object indicates if the port is used for Port monitoring. When the value of this object is true(1), then below objects provide default switch port values configured on this port. ifExtNMode, ifExtNAccessVlanId, ifExtNTrunkNativeVlanId, ifExtNTrunkIsAllowedAll, ifExtNTrunkAllowedVlanList 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.20,WLSX-IFEXT-MIB::ifExtNIsMux,INTEGER,read-write,,current,true(1):false(2), This object indicates if the port is used as a MUX Port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.21,WLSX-IFEXT-MIB::ifExtNPortSpeed,INTEGER,read-only,,current,speed10Mbps(1):speed100Mbps(2):speed1000Mbps(3):speedAuto(4):speed10Gbps(5), Speed of the Port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.22,WLSX-IFEXT-MIB::ifExtNPortDuplex,INTEGER,read-only,,current,half(1):full(2):auto(3), Duplexity of the Port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.23,WLSX-IFEXT-MIB::ifExtNPortType,INTEGER,read-only,,current,fastethernet(1):gigabitethernet(2):xgigabitethernet(3), Type of the Port. 
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.24,WLSX-IFEXT-MIB::ifExtNDescr,OCTET,read-only,,current,, Port Description. 
.1.3.6.1.4.1.14823.2.2.1.4,WLSX-USER-MIB::wlsxUserMIB,,,,,,This MIB module defines MIB objects which provide information about the users in an Aruba controller.
.1.3.6.1.4.1.14823.2.2.1.4.1,WLSX-USER-MIB::wlsxUserAllInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.4.1.1,WLSX-USER-MIB::wlsxTotalNumOfUsers,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2,WLSX-USER-MIB::wlsxUserTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1,WLSX-USER-MIB::wlsxUserEntry,,not-accessible,nUserPhyAddress:nUserIpAddress,current,,User Entry
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.1,WLSX-USER-MIB::nUserPhyAddress,OCTET,not-accessible,,current,, MAC address of the station from which the user connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.2,WLSX-USER-MIB::nUserIpAddress,IpAddress,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.3,WLSX-USER-MIB::nUserName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.4,WLSX-USER-MIB::nUserRole,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.5,WLSX-USER-MIB::nUserUpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.6,WLSX-USER-MIB::nUserAuthenticationMethod,INTEGER,read-only,,current,none(0):web(1):mac(2):vpn(3):dot1x(4):kerberos(5):secureId(7):pubcookie(15):xSec(16):xSecMachine(17):via-vpn(28):other(255), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.7,WLSX-USER-MIB::nUserSubAuthenticationMethod,INTEGER,read-only,,current,authPAP(1):authCHAP(2):authMSCHAP(3):authMSCHAPv2(4):eapTLS(5):eapTTLS(6):eapLEAP(7):eapMD5(8):eapPEAP(9), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.8,WLSX-USER-MIB::nUserAuthServerName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.9,WLSX-USER-MIB::nUserExtVPNAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.10,WLSX-USER-MIB::nUserApLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.11,WLSX-USER-MIB::nUserApBSSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.12,WLSX-USER-MIB::nUserIsOnHomeAgent,INTEGER,read-only,,deprecated,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.13,WLSX-USER-MIB::nUserHomeAgentIpAddress,IpAddress,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.14,WLSX-USER-MIB::nUserMobilityStatus,INTEGER,read-only,,current,visitor(1):away(2):associated(3):wired(4):wireless(5), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.15,WLSX-USER-MIB::nUserHomeVlan,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.16,WLSX-USER-MIB::nUserDefaultVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.17,WLSX-USER-MIB::nUserAssignedVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.18,WLSX-USER-MIB::nUserBWContractName,OCTET,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.19,WLSX-USER-MIB::nUserBWContractUsage,INTEGER,read-only,,deprecated,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.20,WLSX-USER-MIB::nUserBWContractId,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.21,WLSX-USER-MIB::nUserIsProxyArpEnabled,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.22,WLSX-USER-MIB::nUserCurrentVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.23,WLSX-USER-MIB::nUserIsWired,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.24,WLSX-USER-MIB::nUserConnectedSlot,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.25,WLSX-USER-MIB::nUserConnectedPort,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.26,WLSX-USER-MIB::nUserPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.27,WLSX-USER-MIB::nUserMobilityDomainName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.28,WLSX-USER-MIB::nUserUPBWContractName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.29,WLSX-USER-MIB::nUserUPBWContractUsage,INTEGER,read-only,,current,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.30,WLSX-USER-MIB::nUserUPBWContractId,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.31,WLSX-USER-MIB::nUserDNBWContractName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.32,WLSX-USER-MIB::nUserDNBWContractUsage,INTEGER,read-only,,current,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.33,WLSX-USER-MIB::nUserDNBWContractId,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.34,WLSX-USER-MIB::nUserHTMode,INTEGER,read-only,,current,none(1):ht20(2):ht40(3):vht20(4):vht40(5):vht80(6):vht160(7):vht80plus80(8), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.35,WLSX-USER-MIB::nUserEncryptionMethod,INTEGER,read-only,,current,none(0):static-wep(1):dynamic-wep(2):wpa-psk-tkip(3):wpa-tkip(4):wpa-psk-aes(5):wpa-aes(6):wpa2-psk-tkip(7):wpa2-tkip(8):wpa2-psk-aes(9):wpa2-aes(10):xSec(11):bSec-128(12):bSec-256(13):aes-128-cmac(14):unknown(15), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.36,WLSX-USER-MIB::nUserForwardMode,INTEGER,read-only,,current,tunnel-encrypted(0):bridge(1):tunnel-decrypted(2):split-tunnel(3), 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.37,WLSX-USER-MIB::nUserDeviceID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.38,WLSX-USER-MIB::nUserConnectedModule,Integer32,read-only,,current,, The module to which the user is connected, if wired. 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.39,WLSX-USER-MIB::nUserDeviceType,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.40,WLSX-USER-MIB::nUserRxDataPkts64,Counter64,read-only,,current,, This object specifies number of packets received by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.41,WLSX-USER-MIB::nUserTxDataPkts64,Counter64,read-only,,current,, This object specifies number of packets transmitted by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.42,WLSX-USER-MIB::nUserRxDataOctets64,Counter64,read-only,,current,, This object specifies number of octets received by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.43,WLSX-USER-MIB::nUserTxDataOctets64,Counter64,read-only,,current,, This object specifies number of octets transmitted by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.4.1.2.1.44,WLSX-USER-MIB::nVIAUserDeviceID,OCTET,read-only,,current,, MAC address of the station from which the user connected to the controller using VIA. 
.1.3.6.1.4.1.14823.2.2.1.4.1.3,WLSX-USER-MIB::wlsxUserSessionTimeTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.4.1.3.1,WLSX-USER-MIB::wlsxUserSessionTimeEntry,,not-accessible,wlanESSID:wlsxUserSessionTimeLength,current,,
.1.3.6.1.4.1.14823.2.2.1.4.1.3.1.1,WLSX-USER-MIB::wlsxUserSessionTimeLength,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.3.1.2,WLSX-USER-MIB::wlsxUserSessionTimeCount,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.4,WLSX-USER-MIB::wlsxUserStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.4.1.4.1,WLSX-USER-MIB::wlsxNumOfUsers8021x,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.4.2,WLSX-USER-MIB::wlsxNumOfUsersVPN,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.4.3,WLSX-USER-MIB::wlsxNumOfUsersCP,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.4.4,WLSX-USER-MIB::wlsxNumOfUsersMAC,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.4.1.4.5,WLSX-USER-MIB::wlsxNumOfUsersStateful8021x,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5,WLSX-WLAN-MIB::wlsxWlanMIB,,,,,,This MIB module defines MIB objects which provide information about the Wireless Management System (WMS) in the 
.1.3.6.1.4.1.14823.2.2.1.5.1,WLSX-WLAN-MIB::wlsxWlanConfigGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.1.1,WLSX-WLAN-MIB::wlsxSSIDConfigGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1,WLSX-WLAN-MIB::wlsxSSIDConfigTable,,not-accessible,,current,, This Table lists the configuration of the SSID. Note: Currently, this table doesn't return any data. 
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1,WLSX-WLAN-MIB::wlsxSSIDConfigEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanESSID:wlanESSIDIndex,current,,AP Configuration Entry
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.1,WLSX-WLAN-MIB::wlanESSIDIndex,Integer32,not-accessible,,current,, This attribute indicates the index of ESSID. We support up to 16 ESSIDs. 
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.2,WLSX-WLAN-MIB::wlanSSIDConfigHideSSID,INTEGER,read-only,,current,true(1):false(2), This attribute indicates if SSID is hidden or not. 
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.3,WLSX-WLAN-MIB::wlanSSIDConfigNumStaAllowed,Unsigned32,read-only,,current,, This attribute indicates the maximum number of stations that are allowed to access into the network. 
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.4,WLSX-WLAN-MIB::wlanSSIDConfigWmmBeDscp,Unsigned32,read-only,,current,, This attribute indicates the QoS priority of best-effort service. 
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.5,WLSX-WLAN-MIB::wlanSSIDConfigWmmBkDscp,Unsigned32,read-only,,current,, This attribute indicates the QoS priority of background service. 
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.6,WLSX-WLAN-MIB::wlanSSIDConfigWmmViDscp,Unsigned32,read-only,,current,, This attribute indicates the QoS priority of video service. 
.1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.7,WLSX-WLAN-MIB::wlanSSIDConfigWmmVoDscp,Unsigned32,read-only,,current,, This attribute indicates the QoS priority of voice service. 
.1.3.6.1.4.1.14823.2.2.1.5.1.2,WLSX-WLAN-MIB::wlsxAPConfigGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.1.2.1,WLSX-WLAN-MIB::wlsxAPConfigTable,,not-accessible,,current,, This Table lists the configuration of the Access Point. 
.1.3.6.1.4.1.14823.2.2.1.5.1.2.1.1,WLSX-WLAN-MIB::wlsxAPConfigEntry,,not-accessible,wlanAPMacAddress,current,,AP Configuration Entry
.1.3.6.1.4.1.14823.2.2.1.5.1.2.1.1.1,WLSX-WLAN-MIB::wlanAPConfigNetmask,IpAddress,read-only,,current,, The netmask of AP IP Address. 
.1.3.6.1.4.1.14823.2.2.1.5.1.2.1.1.2,WLSX-WLAN-MIB::wlanAPConfigGateway,IpAddress,read-only,,current,, The gateway of the AP. 
.1.3.6.1.4.1.14823.2.2.1.5.2,WLSX-WLAN-MIB::wlsxWlanStateGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1,WLSX-WLAN-MIB::wlsxWlanAccessPointInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.1,WLSX-WLAN-MIB::wlsxWlanTotalNumAccessPoints,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.2,WLSX-WLAN-MIB::wlsxWlanTotalNumStationsAssociated,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.3,WLSX-WLAN-MIB::wlsxWlanAPGroupTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1,WLSX-WLAN-MIB::wlsxWlanAPGroupEntry,,not-accessible,wlanAPGroup,current,,AP Group Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.1,WLSX-WLAN-MIB::wlanAPGroup,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.2,WLSX-WLAN-MIB::wlanAPNumAps,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4,WLSX-WLAN-MIB::wlsxWlanAPTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1,WLSX-WLAN-MIB::wlsxWlanAPEntry,,not-accessible,wlanAPMacAddress,current,,Access Point Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.1,WLSX-WLAN-MIB::wlanAPMacAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.2,WLSX-WLAN-MIB::wlanAPIpAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.3,WLSX-WLAN-MIB::wlanAPName,OCTET,read-write,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.4,WLSX-WLAN-MIB::wlanAPGroupName,OCTET,read-write,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5,WLSX-WLAN-MIB::wlanAPModel,OBJECT,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6,WLSX-WLAN-MIB::wlanAPSerialNumber,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7,WLSX-WLAN-MIB::wlanAPdot11aAntennaGain,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8,WLSX-WLAN-MIB::wlanAPdot11gAntennaGain,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9,WLSX-WLAN-MIB::wlanAPNumRadios,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10,WLSX-WLAN-MIB::wlanAPEnet1Mode,INTEGER,read-only,,current,activeStandby(1):tunnel(2):bridge(3):notApplicable(4):split(5), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.11,WLSX-WLAN-MIB::wlanAPIpsecMode,INTEGER,read-only,,current,enabled(1):disabled(2), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.12,WLSX-WLAN-MIB::wlanAPUpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.13,WLSX-WLAN-MIB::wlanAPModelName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.14,WLSX-WLAN-MIB::wlanAPLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.15,WLSX-WLAN-MIB::wlanAPBuilding,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.16,WLSX-WLAN-MIB::wlanAPFloor,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.17,WLSX-WLAN-MIB::wlanAPLoc,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.18,WLSX-WLAN-MIB::wlanAPExternalAntenna,INTEGER,read-only,,current,notPresent(1):enabled(2):disabled(3), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.19,WLSX-WLAN-MIB::wlanAPStatus,INTEGER,read-only,,current,up(1):down(2), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.20,WLSX-WLAN-MIB::wlanAPNumBootstraps,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.21,WLSX-WLAN-MIB::wlanAPNumReboots,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.22,WLSX-WLAN-MIB::wlanAPUnprovisioned,INTEGER,read-only,,current,yes(1):no(2), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.23,WLSX-WLAN-MIB::wlanAPMonitorMode,INTEGER,read-only,,current,unknown(0):all(1):none(2):mixed(3), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.24,WLSX-WLAN-MIB::wlanAPFQLNBuilding,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.25,WLSX-WLAN-MIB::wlanAPFQLNFloor,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.26,WLSX-WLAN-MIB::wlanAPFQLN,OCTET,read-write,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.27,WLSX-WLAN-MIB::wlanAPFQLNCampus,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.28,WLSX-WLAN-MIB::wlanAPLongitude,OCTET,read-write,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.29,WLSX-WLAN-MIB::wlanAPLatitude,OCTET,read-write,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.30,WLSX-WLAN-MIB::wlanAPAltitude,OCTET,read-write,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.31,WLSX-WLAN-MIB::wlanAPMeshRole,INTEGER,read-write,,current,nonmesh(0):point(1):portal(2), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.32,WLSX-WLAN-MIB::wlanAPSysLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.33,WLSX-WLAN-MIB::wlanAPHwVersion,OCTET,read-only,,current,, Hardware version of the AP. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.34,WLSX-WLAN-MIB::wlanAPSwVersion,OCTET,read-only,,current,, Software version of the AP. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.35,WLSX-WLAN-MIB::wlanAPNumWarmReboots,Integer32,read-only,,current,, Number of times the AP has warm-rebooted. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.36,WLSX-WLAN-MIB::wlanAPOuterIpAddress,IpAddress,read-only,,current,, Outer IP Address of the Access Point. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.37,WLSX-WLAN-MIB::wlanAPRemoteLanIpAddress,IpAddress,read-only,,current,, LAN IP Address of the Remote Access Point. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.38,WLSX-WLAN-MIB::wlanAPActiveUplink,INTEGER,read-only,,current,ethernet(1):usb(2):pppoe(3), Uplink of the RAP(Ethernet or USB). 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.39,WLSX-WLAN-MIB::wlanAPSwitchIpAddress,IpAddress,read-only,,current,, Access points' Serving Controller's IP Address. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.40,WLSX-WLAN-MIB::wlanAPStandbyIpAddress,IpAddress,read-only,,current,, Access points' Standby Controller's IP Address. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.41,WLSX-WLAN-MIB::wlanAPConnectedAsStandby,INTEGER,read-only,,current,active(0):standby(1), Access point connected as active/standby. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5,WLSX-WLAN-MIB::wlsxWlanRadioTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1,WLSX-WLAN-MIB::wlsxWlanRadioEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber,current,,AP Radio Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.1,WLSX-WLAN-MIB::wlanAPRadioNumber,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.2,WLSX-WLAN-MIB::wlanAPRadioType,INTEGER,read-write,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.3,WLSX-WLAN-MIB::wlanAPRadioChannel,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.4,WLSX-WLAN-MIB::wlanAPRadioTransmitPower,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.5,WLSX-WLAN-MIB::wlanAPRadioMode,INTEGER,read-only,,current,airMonitor(1):accessPoint(2):accessPointAndMonitor(3):meshPortal(4):meshPoint(5):rfprotectSensor(6):spectrumSensor(7), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.6,WLSX-WLAN-MIB::wlanAPRadioUtilization,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.7,WLSX-WLAN-MIB::wlanAPRadioNumAssociatedClients,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.8,WLSX-WLAN-MIB::wlanAPRadioNumMonitoredClients,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.9,WLSX-WLAN-MIB::wlanAPRadioNumActiveBSSIDs,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.10,WLSX-WLAN-MIB::wlanAPRadioNumMonitoredBSSIDs,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.11,WLSX-WLAN-MIB::wlanAPRadioBearing,OCTET,read-write,,current,, Antenna Bearing in degrees from True North. Unsigned floating-point value. Range: 0-360. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.12,WLSX-WLAN-MIB::wlanAPRadioTiltAngle,OCTET,read-write,,current,, Tilt angle of antenna in degrees. -ve for downtilt, +ve for uptilt. Signed floating-point value. Range: -90 to +90. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.13,WLSX-WLAN-MIB::wlanAPRadioHTMode,INTEGER,read-only,,current,none(1):ht20(2):ht40(3):vht20(4):vht40(5):vht80(6):vht160(7):vht80plus80(8), The HT mode of the radio, if any. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.14,WLSX-WLAN-MIB::wlanAPRadioHTExtChannel,INTEGER,read-only,,current,none(1):above(2):below(3):eighty(4), Indicates the offset of the 40MHz extension channel, if any. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.15,WLSX-WLAN-MIB::wlanAPRadioHTChannel,OCTET,read-write,,current,, A display string indicating the current channel. If wlanAPRadioHTExtChannel is set to 'above' or 'below', then the channel number will be appended 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.16,WLSX-WLAN-MIB::wlanAPRadioAPName,OCTET,read-write,,current,,Name of the AP the radio belongs to
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7,WLSX-WLAN-MIB::wlsxWlanAPBssidTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1,WLSX-WLAN-MIB::wlsxWlanAPBssidEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanAPBSSID,current,,BSSID Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.1,WLSX-WLAN-MIB::wlanAPBSSID,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.2,WLSX-WLAN-MIB::wlanAPESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.3,WLSX-WLAN-MIB::wlanAPBssidSlot,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.4,WLSX-WLAN-MIB::wlanAPBssidPort,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.5,WLSX-WLAN-MIB::wlanAPBssidPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.6,WLSX-WLAN-MIB::wlanAPBssidRogueType,INTEGER,read-only,,current,valid(1):interfering(2):unsecure(3):dos(4):unknown(5):knownInterfering(6):suspectedUnsecure(7),
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.7,WLSX-WLAN-MIB::wlanAPBssidMode,INTEGER,read-only,,current,ap(1):am(2):mpp(3):mp(4), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.8,WLSX-WLAN-MIB::wlanAPBssidChannel,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.9,WLSX-WLAN-MIB::wlanAPBssidUpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.10,WLSX-WLAN-MIB::wlanAPBssidInactiveTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.11,WLSX-WLAN-MIB::wlanAPBssidLoadBalancing,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.12,WLSX-WLAN-MIB::wlanAPBssidNumAssociatedStations,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.13,WLSX-WLAN-MIB::wlanAPBssidAPMacAddress,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.14,WLSX-WLAN-MIB::wlanAPBssidPhyNumber,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.15,WLSX-WLAN-MIB::wlanAPBssidHTMode,INTEGER,read-only,,current,none(1):ht20(2):ht40(3):vht20(4):vht40(5):vht80(6):vht160(7):vht80plus80(8), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.16,WLSX-WLAN-MIB::wlanAPBssidHTExtChannel,INTEGER,read-only,,current,none(1):above(2):below(3):eighty(4), Indicates the offset of the 40MHz extension channel, if any. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.17,WLSX-WLAN-MIB::wlanAPBssidHTChannel,OCTET,read-only,,current,, A display string indicating the current channel. If wlanAPBssidHTExtChannel is set to 'above' or 'below', then the channel number will be appended 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.18,WLSX-WLAN-MIB::wlanAPBssidSnr,Integer32,read-only,,current,, Indicates the Signal Noise Ratio of this BSSID. 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.8,WLSX-WLAN-MIB::wlsxWlanESSIDTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1,WLSX-WLAN-MIB::wlsxWlanESSIDEntry,,not-accessible,wlanESSID,current,,ESSID Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.1,WLSX-WLAN-MIB::wlanESSID,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.2,WLSX-WLAN-MIB::wlanESSIDNumStations,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.3,WLSX-WLAN-MIB::wlanESSIDNumAccessPointsUp,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.4,WLSX-WLAN-MIB::wlanESSIDNumAccessPointsDown,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.5,WLSX-WLAN-MIB::wlanESSIDEncryptionType,BITS,read-only,,current,disabled(0):static-wep(1):dynamic-wep(2):static-wpa(3):dynamic-wpa(4):wpa2-psk-aes(5):wpa2-8021x-aes(6):wpa2PreAuth(7):xsec(8):wpa-psk-aes(9):wpa-aes(10):wpa2-psk-tkip(11):wpa2-8021x-tkip(12), 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.9,WLSX-WLAN-MIB::wlsxWlanESSIDVlanPoolTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1,WLSX-WLAN-MIB::wlsxWlanESSIDVlanPoolEntry,,not-accessible,wlanESSID:wlanESSIDVlanId,current,,ESSID Vlan Pool Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.1,WLSX-WLAN-MIB::wlanESSIDVlanId,Unsigned32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.2,WLSX-WLAN-MIB::wlanESSIDVlanPoolStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), 
.1.3.6.1.4.1.14823.2.2.1.5.2.2,WLSX-WLAN-MIB::wlsxWlanStationInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1,WLSX-WLAN-MIB::wlsxWlanStationTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1,WLSX-WLAN-MIB::wlsxWlanStationEntry,,not-accessible,wlanStaPhyAddress,current,,Station Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.1,WLSX-WLAN-MIB::wlanStaPhyAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.2,WLSX-WLAN-MIB::wlanStaApBssid,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.3,WLSX-WLAN-MIB::wlanStaPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.4,WLSX-WLAN-MIB::wlanStaIsAuthenticated,INTEGER,read-only,,current,true(1):false(2), Indicates whether the station is authenticated. 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.5,WLSX-WLAN-MIB::wlanStaIsAssociated,INTEGER,read-only,,current,true(1):false(2), Indicates whether the station is associated. 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.6,WLSX-WLAN-MIB::wlanStaChannel,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.7,WLSX-WLAN-MIB::wlanStaVlanId,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.8,WLSX-WLAN-MIB::wlanStaVOIPState,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.9,WLSX-WLAN-MIB::wlanStaVOIPProtocol,INTEGER,read-only,,current,sccp(1):svp(2):vocera(3):sip(9):ua(11):h323(13):unknown(15), 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.10,WLSX-WLAN-MIB::wlanStaTransmitRate,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.11,WLSX-WLAN-MIB::wlanStaAssociationID,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.12,WLSX-WLAN-MIB::wlanStaAccessPointESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.13,WLSX-WLAN-MIB::wlanStaPhyNumber,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.14,WLSX-WLAN-MIB::wlanStaRSSI,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.15,WLSX-WLAN-MIB::wlanStaUpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.16,WLSX-WLAN-MIB::wlanStaHTMode,INTEGER,read-only,,current,none(1):ht20(2):ht40(3):vht20(4):vht40(5):vht80(6):vht160(7):vht80plus80(8), 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.17,WLSX-WLAN-MIB::wlanStaTransmitRateCode,Unsigned32,read-only,,current,, Transmit rate code with which the Station is associated with this system, unit is mbps. 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2,WLSX-WLAN-MIB::wlsxWlanStaAssociationFailureTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1,WLSX-WLAN-MIB::wlsxWlanStaAssociationFailureEntry,,not-accessible,wlanStaPhyAddress:wlanAPBSSID,current,,Station Association Failure Entry
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.1,WLSX-WLAN-MIB::wlanStaAssocFailureApName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.2,WLSX-WLAN-MIB::wlanStaAssocFailureApEssid,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.3,WLSX-WLAN-MIB::wlanStaAssocFailurePhyNum,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.4,WLSX-WLAN-MIB::wlanStaAssocFailurePhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.5,WLSX-WLAN-MIB::wlanStaAssocFailureElapsedTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.6,WLSX-WLAN-MIB::wlanStaAssocFailureReason,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.2.3,WLSX-WLAN-MIB::wlsxWlanAssociationInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.3,WLSX-WLAN-MIB::wlsxWlanStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1,WLSX-WLAN-MIB::wlsxWlanAccessPointStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1,WLSX-WLAN-MIB::wlsxWlanAPStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1,WLSX-WLAN-MIB::wlsxWlanAPStatsEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanAPBSSID,current,,Access Point Stats entry
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1,WLSX-WLAN-MIB::wlanAPCurrentChannel,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.2,WLSX-WLAN-MIB::wlanAPNumClients,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.3,WLSX-WLAN-MIB::wlanAPTxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.4,WLSX-WLAN-MIB::wlanAPTxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.5,WLSX-WLAN-MIB::wlanAPRxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.6,WLSX-WLAN-MIB::wlanAPRxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.7,WLSX-WLAN-MIB::wlanAPTxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.8,WLSX-WLAN-MIB::wlanAPRxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.9,WLSX-WLAN-MIB::wlanAPChannelThroughput,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.10,WLSX-WLAN-MIB::wlanAPFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.11,WLSX-WLAN-MIB::wlanAPFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.12,WLSX-WLAN-MIB::wlanAPFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.13,WLSX-WLAN-MIB::wlanAPFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.14,WLSX-WLAN-MIB::wlanAPFrameBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.15,WLSX-WLAN-MIB::wlanAPFrameRetryErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.16,WLSX-WLAN-MIB::wlanAPChannelErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.17,WLSX-WLAN-MIB::wlanAPFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.18,WLSX-WLAN-MIB::wlanAPRxDataPkts,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.19,WLSX-WLAN-MIB::wlanAPRxDataBytes,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.20,WLSX-WLAN-MIB::wlanAPTxDataPkts,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.21,WLSX-WLAN-MIB::wlanAPTxDataBytes,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.22,WLSX-WLAN-MIB::wlanAPRxDataPkts64,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.23,WLSX-WLAN-MIB::wlanAPRxDataBytes64,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.24,WLSX-WLAN-MIB::wlanAPTxDataPkts64,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.25,WLSX-WLAN-MIB::wlanAPTxDataBytes64,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.26,WLSX-WLAN-MIB::wlanAPWiredRxErrorPkts,Counter32,read-only,,current,, The number of error packets received from the controller on this BSSID. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.27,WLSX-WLAN-MIB::wlanAPRxErrorPkts,Counter32,read-only,,current,, The number of error packets received from stations on this BSSID. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2,WLSX-WLAN-MIB::wlsxWlanAPRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1,WLSX-WLAN-MIB::wlsxWlanAPRateStatsEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanAPBSSID,current,,Data rate based packet and byte count entry for an AP
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.1,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.2,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.3,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.4,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.5,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.6,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.7,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.8,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.9,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.10,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.11,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.12,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.13,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.14,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.15,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.16,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.17,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.18,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.19,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.20,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.21,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.22,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.23,WLSX-WLAN-MIB::wlanAPStatsTotPktsAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.24,WLSX-WLAN-MIB::wlanAPStatsTotBytesAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3,WLSX-WLAN-MIB::wlsxWlanAPDATypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1,WLSX-WLAN-MIB::wlsxWlanAPDATypeStatsEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanAPBSSID,current,,Destination Address based packet and byte count entry for an AP
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.1,WLSX-WLAN-MIB::wlanAPStatsTotDABroadcastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.2,WLSX-WLAN-MIB::wlanAPStatsTotDABroadcastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.3,WLSX-WLAN-MIB::wlanAPStatsTotDAMulticastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.4,WLSX-WLAN-MIB::wlanAPStatsTotDAMulticastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.5,WLSX-WLAN-MIB::wlanAPStatsTotDAUnicastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.6,WLSX-WLAN-MIB::wlanAPStatsTotDAUnicastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4,WLSX-WLAN-MIB::wlsxWlanAPFrameTypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1,WLSX-WLAN-MIB::wlsxWlanAPFrameTypeStatsEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanAPBSSID,current,,Frame Type based packet and byte count entry for an AP
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.1,WLSX-WLAN-MIB::wlanAPStatsTotMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.2,WLSX-WLAN-MIB::wlanAPStatsTotMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.3,WLSX-WLAN-MIB::wlanAPStatsTotCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.4,WLSX-WLAN-MIB::wlanAPStatsTotCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.5,WLSX-WLAN-MIB::wlanAPStatsTotDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.6,WLSX-WLAN-MIB::wlanAPStatsTotDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5,WLSX-WLAN-MIB::wlsxWlanAPPktSizeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1,WLSX-WLAN-MIB::wlsxWlanAPPktSizeStatsEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanAPBSSID,current,,Packet Size based packet count entry for a BSSID
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.1,WLSX-WLAN-MIB::wlanAPStatsPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.2,WLSX-WLAN-MIB::wlanAPStatsPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.3,WLSX-WLAN-MIB::wlanAPStatsPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.4,WLSX-WLAN-MIB::wlanAPStatsPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.5,WLSX-WLAN-MIB::wlanAPStatsPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.6,WLSX-WLAN-MIB::wlanAPStatsPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6,WLSX-WLAN-MIB::wlsxWlanAPChStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1,WLSX-WLAN-MIB::wlsxWlanAPChStatsEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber,current,,Access Point Channel Stats entry
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.1,WLSX-WLAN-MIB::wlanAPChannelNumber,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.2,WLSX-WLAN-MIB::wlanAPChNumStations,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.3,WLSX-WLAN-MIB::wlanAPChTotPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.4,WLSX-WLAN-MIB::wlanAPChTotBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.5,WLSX-WLAN-MIB::wlanAPChTotRetryPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.6,WLSX-WLAN-MIB::wlanAPChTotFragmentedPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.7,WLSX-WLAN-MIB::wlanAPChTotPhyErrPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.8,WLSX-WLAN-MIB::wlanAPChTotMacErrPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.9,WLSX-WLAN-MIB::wlanAPChNoise,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.10,WLSX-WLAN-MIB::wlanAPChCoverageIndex,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.11,WLSX-WLAN-MIB::wlanAPChInterferenceIndex,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.12,WLSX-WLAN-MIB::wlanAPChFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.13,WLSX-WLAN-MIB::wlanAPChFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.14,WLSX-WLAN-MIB::wlanAPChFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.15,WLSX-WLAN-MIB::wlanAPChFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.16,WLSX-WLAN-MIB::wlanAPChFrameBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.17,WLSX-WLAN-MIB::wlanAPChFrameRetryErrorRate,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.18,WLSX-WLAN-MIB::wlanAPChBusyRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.19,WLSX-WLAN-MIB::wlanAPChNumAPs,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.20,WLSX-WLAN-MIB::wlanAPChFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.21,WLSX-WLAN-MIB::wlanAPChTransmittedFragmentCount,Counter32,read-only,,current,, This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.22,WLSX-WLAN-MIB::wlanAPChMulticastTransmittedFrameCount,Counter32,read-only,,current,, This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.23,WLSX-WLAN-MIB::wlanAPChFailedCount,Counter32,read-only,,current,, This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or dot11LongRetryLimit. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.24,WLSX-WLAN-MIB::wlanAPChRetryCount,Counter32,read-only,,current,, This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.25,WLSX-WLAN-MIB::wlanAPChMultipleRetryCount,Counter32,read-only,,current,, This counter shall increment when an MSDU is successfully transmitted after more than one retransmission. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.26,WLSX-WLAN-MIB::wlanAPChFrameDuplicateCount,Counter32,read-only,,current,, This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.27,WLSX-WLAN-MIB::wlanAPChRTSSuccessCount,Counter32,read-only,,current,, This counter shall increment when a CTS is received in response to an RTS. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.28,WLSX-WLAN-MIB::wlanAPChRTSFailureCount,Counter32,read-only,,current,, This counter shall increment when a CTS is not received in response to an RTS. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.29,WLSX-WLAN-MIB::wlanAPChACKFailureCount,Counter32,read-only,,current,, This counter shall increment when an ACK is not received when expected. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.30,WLSX-WLAN-MIB::wlanAPChReceivedFragmentCount,Counter32,read-only,,current,, This counter shall be incremented for each successfully received MPDU of type Data or Management. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.31,WLSX-WLAN-MIB::wlanAPChMulticastReceivedFrameCount,Counter32,read-only,,current,, This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.32,WLSX-WLAN-MIB::wlanAPChFCSErrorCount,Counter32,read-only,,current,, This counter shall increment when an FCS error is detected in a received MPDU. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.33,WLSX-WLAN-MIB::wlanAPChTransmittedFrameCount,Counter32,read-only,,current,, This counter shall increment for each successfully transmitted MSDU. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.34,WLSX-WLAN-MIB::wlanAPChWEPUndecryptableCount,Counter32,read-only,,current,, This counter shall increment when a frame is received with the Protected Frame subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the transmitter's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.35,WLSX-WLAN-MIB::wlanAPChRxUtilization,INTEGER,read-only,,current,, This is the percentage of time spent by the radio  in receiving packets. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.36,WLSX-WLAN-MIB::wlanAPChTxUtilization,INTEGER,read-only,,current,, This is the percentage of time spent by the radio  in transmitting packets. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.37,WLSX-WLAN-MIB::wlanAPChUtilization,INTEGER,read-only,,current,, This is the percentage of time the channel is busy. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7,WLSX-WLAN-MIB::wlsxWlanAPWiredStatsTable,,not-accessible,,current,, This Table lists the Wired statistics of all the Access Points connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1,WLSX-WLAN-MIB::wlsxWlanAPWiredStatsEntry,,not-accessible,wlanAPMacAddress,current,,Access Point Wired Stats entry
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.1,WLSX-WLAN-MIB::wlanAPWiredRxPkts,Counter32,read-only,,current,, This attribute indicates the total packets received from the AP wired side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.2,WLSX-WLAN-MIB::wlanAPWiredRxDroppedPkts,Counter32,read-only,,current,, This attribute indicates the total dropped packets received from the AP wired side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.3,WLSX-WLAN-MIB::wlanAPWiredRxBytes,Counter32,read-only,,current,, This attribute indicates the total bytes of correct packets received from the AP wired side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.4,WLSX-WLAN-MIB::wlanAPWiredTxBytes,Counter32,read-only,,current,, This attribute indicates the total bytes transmitted from the AP wired side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.5,WLSX-WLAN-MIB::wlanAPWiredRxRate,Gauge32,read-only,,current,, This attribute indicates the data rate (kbyte/s) received from AP wired side in sampling interval. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.6,WLSX-WLAN-MIB::wlanAPWiredTxRate,Gauge32,read-only,,current,, This attribute indicates the data rate (kbyte/s) transmitted from AP wired side in sampling interval. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.8,WLSX-WLAN-MIB::wlsxWlanAPESSIDStatsTable,,not-accessible,,current,, This Table lists the ESSID statistics of all the Access Points connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1,WLSX-WLAN-MIB::wlsxWlanAPESSIDStatsEntry,,not-accessible,wlanAPMacAddress:wlanESSID,current,,Access Point ESSID Stats entry
.1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.1,WLSX-WLAN-MIB::wlanAPESSIDWirelessRxBytes,Counter32,read-only,,current,, This attribute indicates the total bytes of correct packets received from the AP ESSID wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.2,WLSX-WLAN-MIB::wlanAPESSIDWirelessTxBytes,Counter32,read-only,,current,, This attribute indicates the total bytes transmitted from the AP ESSID wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.3,WLSX-WLAN-MIB::wlanAPESSIDWiredRxBytes,Counter32,read-only,,current,, This attribute indicates the total bytes of correct packets received from the AP ESSID wired side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.4,WLSX-WLAN-MIB::wlanAPESSIDWiredTxBytes,Counter32,read-only,,current,, This attribute indicates the total bytes transmitted from the AP ESSID wired side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9,WLSX-WLAN-MIB::wlsxWlanAPRadioStatsTable,,not-accessible,,current,, This Table lists the Radio statistics of all the Access Points connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1,WLSX-WLAN-MIB::wlsxWlanAPRadioStatsEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber,current,,Access Point Radio Stats entry
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.1,WLSX-WLAN-MIB::wlanAPRadioRxPkts,Counter32,read-only,,current,, This attribute indicates the total packets transmitted from the AP radio wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.2,WLSX-WLAN-MIB::wlanAPRadioRxBytes,Counter32,read-only,,current,, This attribute indicates the total correct bytes received from the AP radio wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.3,WLSX-WLAN-MIB::wlanAPRadioTxPkts,Counter32,read-only,,current,, This attribute indicates the total packets transmitted from the AP radio wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.4,WLSX-WLAN-MIB::wlanAPRadioTxBytes,Counter32,read-only,,current,, This attribute indicates the total bytes transmitted from the AP radio wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.5,WLSX-WLAN-MIB::wlanAPRadioTxDroppedPkts,Counter32,read-only,,current,, This attribute indicates the dropped packets transmitted from the AP radio wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.6,WLSX-WLAN-MIB::wlanAPRadioTxErrorPkts,Counter32,read-only,,current,, This attribute indicates the error packets transmitted from the AP radio wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.7,WLSX-WLAN-MIB::wlanAPRadioRxRate,Gauge32,read-only,,current,, This attribute indicates the data rate (kbyte/s) received from AP radio wireless side in sampling interval. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.8,WLSX-WLAN-MIB::wlanAPRadioTxRate,Gauge32,read-only,,current,, This attribute indicates the data rate (kbyte/s) transmitted from AP radio wireless side in sampling interval. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.9,WLSX-WLAN-MIB::wlanApRadioAssocReqCount,Counter32,read-only,,current,,This attribute indicates the times of associate request on this  radio.
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.10,WLSX-WLAN-MIB::wlanApRadioAssocReqSuccCount,Counter32,read-only,,current,,This attribute indicates the times of successful associate request on this radio.
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.11,WLSX-WLAN-MIB::wlanApRadioReAssocReqCount,Counter32,read-only,,current,,This attribute indicates the times of re-associate request on this radio.
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.12,WLSX-WLAN-MIB::wlanApRadioReAssocReqSuccCount,Counter32,read-only,,current,,This attribute indicates the times of successful re-associate  request on this radio. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.13,WLSX-WLAN-MIB::wlanAPRadioStationDuration,Integer32,read-only,,current,, This attribute indicates the total occupied duration, which is the total duration of user connecting. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.14,WLSX-WLAN-MIB::wlanAPRadioAssocSuccPercent,Gauge32,read-only,,current,, The Association Success Percent. 
.1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.15,WLSX-WLAN-MIB::wlanAPRadioTxDataBytes,Counter32,read-only,,current,, This attribute indicates the total data bytes transmitted from the AP radio wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.2,WLSX-WLAN-MIB::wlsxWlanStationStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1,WLSX-WLAN-MIB::wlsxWlanStationStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1,WLSX-WLAN-MIB::wlsxWlanStationStatsEntry,,not-accessible,wlanStaPhyAddress,current,,Station Stats Entry
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.1,WLSX-WLAN-MIB::wlanStaChannelNum,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.2,WLSX-WLAN-MIB::wlanStaTxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.3,WLSX-WLAN-MIB::wlanStaTxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.4,WLSX-WLAN-MIB::wlanStaRxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.5,WLSX-WLAN-MIB::wlanStaRxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.6,WLSX-WLAN-MIB::wlanStaTxBCastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.7,WLSX-WLAN-MIB::wlanStaRxBCastBytes,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.8,WLSX-WLAN-MIB::wlanStaTxMCastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.9,WLSX-WLAN-MIB::wlanStaRxMCastBytes,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.10,WLSX-WLAN-MIB::wlanStaDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.11,WLSX-WLAN-MIB::wlanStaCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.12,WLSX-WLAN-MIB::wlanStaNumAssocRequests,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.13,WLSX-WLAN-MIB::wlanStaNumAuthRequests,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.14,WLSX-WLAN-MIB::wlanStaTxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.15,WLSX-WLAN-MIB::wlanStaRxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.16,WLSX-WLAN-MIB::wlanStaFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.17,WLSX-WLAN-MIB::wlanStaFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.18,WLSX-WLAN-MIB::wlanStaFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.19,WLSX-WLAN-MIB::wlanStaFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.20,WLSX-WLAN-MIB::wlanStaFrameBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.21,WLSX-WLAN-MIB::wlanStaFrameRetryErrorRate,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.22,WLSX-WLAN-MIB::wlanStaFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.23,WLSX-WLAN-MIB::wlanStaTxBCastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.24,WLSX-WLAN-MIB::wlanStaTxMCastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.25,WLSX-WLAN-MIB::wlanStaTxBytes64,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.26,WLSX-WLAN-MIB::wlanStaRxBytes64,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2,WLSX-WLAN-MIB::wlsxWlanStaRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1,WLSX-WLAN-MIB::wlsxWlanStaRateStatsEntry,,not-accessible,wlanStaPhyAddress,current,,Data rate based packet and byte count entry for a station
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.1,WLSX-WLAN-MIB::wlanStaTxPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.2,WLSX-WLAN-MIB::wlanStaTxBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.3,WLSX-WLAN-MIB::wlanStaTxPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.4,WLSX-WLAN-MIB::wlanStaTxBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.5,WLSX-WLAN-MIB::wlanStaTxPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.6,WLSX-WLAN-MIB::wlanStaTxBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.7,WLSX-WLAN-MIB::wlanStaTxPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.8,WLSX-WLAN-MIB::wlanStaTxBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.9,WLSX-WLAN-MIB::wlanStaTxPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.10,WLSX-WLAN-MIB::wlanStaTxBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.11,WLSX-WLAN-MIB::wlanStaTxPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.12,WLSX-WLAN-MIB::wlanStaTxBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.13,WLSX-WLAN-MIB::wlanStaTxPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.14,WLSX-WLAN-MIB::wlanStaTxBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.15,WLSX-WLAN-MIB::wlanStaTxPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.16,WLSX-WLAN-MIB::wlanStaTxBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.17,WLSX-WLAN-MIB::wlanStaTxPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.18,WLSX-WLAN-MIB::wlanStaTxBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.19,WLSX-WLAN-MIB::wlanStaTxPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.20,WLSX-WLAN-MIB::wlanStaTxBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.21,WLSX-WLAN-MIB::wlanStaTxPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.22,WLSX-WLAN-MIB::wlanStaTxBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.23,WLSX-WLAN-MIB::wlanStaRxPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.24,WLSX-WLAN-MIB::wlanStaRxBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.25,WLSX-WLAN-MIB::wlanStaRxPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.26,WLSX-WLAN-MIB::wlanStaRxBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.27,WLSX-WLAN-MIB::wlanStaRxPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.28,WLSX-WLAN-MIB::wlanStaRxBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.29,WLSX-WLAN-MIB::wlanStaRxPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.30,WLSX-WLAN-MIB::wlanStaRxBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.31,WLSX-WLAN-MIB::wlanStaRxPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.32,WLSX-WLAN-MIB::wlanStaRxBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.33,WLSX-WLAN-MIB::wlanStaRxPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.34,WLSX-WLAN-MIB::wlanStaRxBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.35,WLSX-WLAN-MIB::wlanStaRxPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.36,WLSX-WLAN-MIB::wlanStaRxBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.37,WLSX-WLAN-MIB::wlanStaRxPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.38,WLSX-WLAN-MIB::wlanStaRxBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.39,WLSX-WLAN-MIB::wlanStaRxPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.40,WLSX-WLAN-MIB::wlanStaRxBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.41,WLSX-WLAN-MIB::wlanStaRxPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.42,WLSX-WLAN-MIB::wlanStaRxBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.43,WLSX-WLAN-MIB::wlanStaRxPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.44,WLSX-WLAN-MIB::wlanStaRxBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.45,WLSX-WLAN-MIB::wlanStaTxPktsAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.46,WLSX-WLAN-MIB::wlanStaTxBytesAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.47,WLSX-WLAN-MIB::wlanStaRxPktsAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.48,WLSX-WLAN-MIB::wlanStaRxBytesAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3,WLSX-WLAN-MIB::wlsxWlanStaDATypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1,WLSX-WLAN-MIB::wlsxWlanStaDATypeStatsEntry,,not-accessible,wlanStaPhyAddress,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.1,WLSX-WLAN-MIB::wlanStaTxDABroadcastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.2,WLSX-WLAN-MIB::wlanStaTxDABroadcastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.3,WLSX-WLAN-MIB::wlanStaTxDAMulticastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.4,WLSX-WLAN-MIB::wlanStaTxDAMulticastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.5,WLSX-WLAN-MIB::wlanStaTxDAUnicastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.6,WLSX-WLAN-MIB::wlanStaTxDAUnicastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4,WLSX-WLAN-MIB::wlsxWlanStaFrameTypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1,WLSX-WLAN-MIB::wlsxWlanStaFrameTypeStatsEntry,,not-accessible,wlanStaPhyAddress,current,,Frame Type based packet and byte count entry for a station
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.1,WLSX-WLAN-MIB::wlanStaTxMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.2,WLSX-WLAN-MIB::wlanStaTxMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.3,WLSX-WLAN-MIB::wlanStaTxCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.4,WLSX-WLAN-MIB::wlanStaTxCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.5,WLSX-WLAN-MIB::wlanStaTxDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.6,WLSX-WLAN-MIB::wlanStaTxDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.7,WLSX-WLAN-MIB::wlanStaRxMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.8,WLSX-WLAN-MIB::wlanStaRxMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.9,WLSX-WLAN-MIB::wlanStaRxCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.10,WLSX-WLAN-MIB::wlanStaRxCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.11,WLSX-WLAN-MIB::wlanStaRxDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.12,WLSX-WLAN-MIB::wlanStaRxDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5,WLSX-WLAN-MIB::wlsxWlanStaPktSizeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1,WLSX-WLAN-MIB::wlsxWlanStaPktSizeStatsEntry,,not-accessible,wlanStaPhyAddress,current,,Packet Size based packet count entry for a station
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.1,WLSX-WLAN-MIB::wlanStaTxPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.2,WLSX-WLAN-MIB::wlanStaTxPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.3,WLSX-WLAN-MIB::wlanStaTxPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.4,WLSX-WLAN-MIB::wlanStaTxPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.5,WLSX-WLAN-MIB::wlanStaTxPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.6,WLSX-WLAN-MIB::wlanStaTxPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.7,WLSX-WLAN-MIB::wlanStaRxPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.8,WLSX-WLAN-MIB::wlanStaRxPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.9,WLSX-WLAN-MIB::wlanStaRxPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.10,WLSX-WLAN-MIB::wlanStaRxPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.11,WLSX-WLAN-MIB::wlanStaRxPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.12,WLSX-WLAN-MIB::wlanStaRxPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.5.3.3,WLSX-WLAN-MIB::wlsxWlanSwitchStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1,WLSX-WLAN-MIB::wlsxWlanESSIDStatsTable,,not-accessible,,current,, This Table lists statistics of the ESSID controlled by this controller. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1,WLSX-WLAN-MIB::wlsxWlanESSIDStatsEntry,,not-accessible,wlanESSID,current,,ESSID Stats Entry
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.1,WLSX-WLAN-MIB::wlanESSIDRxPkts,Counter32,read-only,,current,, The total number of packets on the ESSID uplink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.2,WLSX-WLAN-MIB::wlanESSIDRxDroppedPkts,Counter32,read-only,,current,, The total number of dropped packets on the ESSID uplink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.3,WLSX-WLAN-MIB::wlanESSIDRxRetryPkts,Counter32,read-only,,current,, The total number of re-transmission packets on the ESSID uplink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.4,WLSX-WLAN-MIB::wlanESSIDTxPkts,Counter32,read-only,,current,, The total number of packets on the ESSID downlink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.5,WLSX-WLAN-MIB::wlanESSIDTxDroppedPkts,Counter32,read-only,,current,, The total number of dropped packets on the ESSID downlink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.6,WLSX-WLAN-MIB::wlanESSIDTxRetryPkts,Counter32,read-only,,current,, The total number of re-transmission packets on the ESSID downlink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.7,WLSX-WLAN-MIB::wlanESSIDTxErrorPkts,Counter32,read-only,,current,, The total number of error packets on the ESSID downlink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.8,WLSX-WLAN-MIB::wlanESSIDRxRate,Gauge32,read-only,,current,, The data rate received from the ESSID in sampling interval, unit is kbyte/s. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.9,WLSX-WLAN-MIB::wlanESSIDTxRate,Gauge32,read-only,,current,, The data rate transmitted from the ESSID in sampling interval, unit is kbyte/s. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.10,WLSX-WLAN-MIB::wlanESSIDWiredRxPkts,Counter32,read-only,,current,, The total number of packets on the ESSID uplink channel of wired side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.11,WLSX-WLAN-MIB::wlanESSIDWiredRxBytes,Counter32,read-only,,current,, The total number of bytes on the ESSID uplink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.12,WLSX-WLAN-MIB::wlanESSIDWiredTxBytes,Counter32,read-only,,current,, The total number of bytes on the ESSID downlink channel of wireless side. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.2,WLSX-WLAN-MIB::wlsxWlanEthStatsTable,,not-accessible,,current,, This Table lists statistics of all ethernet ports of this controller. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.2.1,WLSX-WLAN-MIB::wlsxWlanEthStatsEntry,,not-accessible,ifIndex,current,,Ethernet Port Stats Entry
.1.3.6.1.4.1.14823.2.2.1.5.3.3.2.1.1,WLSX-WLAN-MIB::wlanEthRxRate,Gauge32,read-only,,current,, The data rate received from the ethernet port in sampling interval, unit is kbyte/s. 
.1.3.6.1.4.1.14823.2.2.1.5.3.3.2.1.2,WLSX-WLAN-MIB::wlanEthTxRate,Gauge32,read-only,,current,, The data rate transmitted from the ethernet port in sampling interval, unit is kbyte/s. 
.1.3.6.1.4.1.14823.2.2.1.5.100,WLSX-WLAN-MIB::wlsxRAPTraps,,,,,,
.1.3.6.1.4.1.14823.2.2.1.5.100.1,WLSX-WLAN-MIB::wlsxRAPActiveUplink,,,,,,A trap which indicates the RAP Active Uplink
.1.3.6.1.4.1.14823.2.2.1.6,WLSX-MON-MIB::wlsxMonMIB,,,,,, information about the Monitored Access Points.
.1.3.6.1.4.1.14823.2.2.1.6.6,WLSX-MON-MIB::wlsxMonStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1,WLSX-MON-MIB::wlsxMonAccessPointStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1,WLSX-MON-MIB::wlsxMonAPStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1,WLSX-MON-MIB::wlsxMonAPStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID,current,,Monitored Access Point Stats entry
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.1,WLSX-MON-MIB::monPhyAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.2,WLSX-MON-MIB::monRadioNumber,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.3,WLSX-MON-MIB::monitoredApBSSID,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.4,WLSX-MON-MIB::monPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.5,WLSX-MON-MIB::monAPCurrentChannel,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.6,WLSX-MON-MIB::monAPNumClients,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.7,WLSX-MON-MIB::monAPTxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.8,WLSX-MON-MIB::monAPTxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.9,WLSX-MON-MIB::monAPRxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.10,WLSX-MON-MIB::monAPRxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.11,WLSX-MON-MIB::monAPTxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.12,WLSX-MON-MIB::monAPRxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.13,WLSX-MON-MIB::monAPChannelThroughput,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.14,WLSX-MON-MIB::monAPFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.15,WLSX-MON-MIB::monAPFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.16,WLSX-MON-MIB::monAPFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.17,WLSX-MON-MIB::monAPFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.18,WLSX-MON-MIB::monAPFrameBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.19,WLSX-MON-MIB::monAPFrameRetryErrorRate,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.20,WLSX-MON-MIB::monAPChannelErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.21,WLSX-MON-MIB::monAPESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.22,WLSX-MON-MIB::monAPRSSI,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.23,WLSX-MON-MIB::monAPFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2,WLSX-MON-MIB::wlsxMonAPRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1,WLSX-MON-MIB::wlsxMonAPRateStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID,current,,Data rate based packet and byte count entry for a monitored AP
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.1,WLSX-MON-MIB::monAPStatsTotPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.2,WLSX-MON-MIB::monAPStatsTotBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.3,WLSX-MON-MIB::monAPStatsTotPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.4,WLSX-MON-MIB::monAPStatsTotBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.5,WLSX-MON-MIB::monAPStatsTotPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.6,WLSX-MON-MIB::monAPStatsTotBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.7,WLSX-MON-MIB::monAPStatsTotPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.8,WLSX-MON-MIB::monAPStatsTotBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.9,WLSX-MON-MIB::monAPStatsTotPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.10,WLSX-MON-MIB::monAPStatsTotBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.11,WLSX-MON-MIB::monAPStatsTotPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.12,WLSX-MON-MIB::monAPStatsTotBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.13,WLSX-MON-MIB::monAPStatsTotPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.14,WLSX-MON-MIB::monAPStatsTotBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.15,WLSX-MON-MIB::monAPStatsTotPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.16,WLSX-MON-MIB::monAPStatsTotBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.17,WLSX-MON-MIB::monAPStatsTotPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.18,WLSX-MON-MIB::monAPStatsTotBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.19,WLSX-MON-MIB::monAPStatsTotPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.20,WLSX-MON-MIB::monAPStatsTotBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.21,WLSX-MON-MIB::monAPStatsTotPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.22,WLSX-MON-MIB::monAPStatsTotBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.23,WLSX-MON-MIB::monAPStatsTotPktsAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.24,WLSX-MON-MIB::monAPStatsTotBytesAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3,WLSX-MON-MIB::wlsxMonAPDATypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1,WLSX-MON-MIB::wlsxMonAPDATypeStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.1,WLSX-MON-MIB::monAPStatsTotDABroadcastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.2,WLSX-MON-MIB::monAPStatsTotDABroadcastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.3,WLSX-MON-MIB::monAPStatsTotDAMulticastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.4,WLSX-MON-MIB::monAPStatsTotDAMulticastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.5,WLSX-MON-MIB::monAPStatsTotDAUnicastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.6,WLSX-MON-MIB::monAPStatsTotDAUnicastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4,WLSX-MON-MIB::wlsxMonAPFrameTypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1,WLSX-MON-MIB::wlsxMonAPFrameTypeStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID,current,,Frame Type based packet and byte count entry for a monitored AP
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.1,WLSX-MON-MIB::monAPStatsTotMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.2,WLSX-MON-MIB::monAPStatsTotMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.3,WLSX-MON-MIB::monAPStatsTotCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.4,WLSX-MON-MIB::monAPStatsTotCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.5,WLSX-MON-MIB::monAPStatsTotDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.6,WLSX-MON-MIB::monAPStatsTotDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5,WLSX-MON-MIB::wlsxMonAPPktSizeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1,WLSX-MON-MIB::wlsxMonAPPktSizeStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID,current,,Packet Size based packet count entry for a BSSID
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.1,WLSX-MON-MIB::monAPStatsPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.2,WLSX-MON-MIB::monAPStatsPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.3,WLSX-MON-MIB::monAPStatsPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.4,WLSX-MON-MIB::monAPStatsPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.5,WLSX-MON-MIB::monAPStatsPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.6,WLSX-MON-MIB::monAPStatsPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.6,WLSX-MON-MIB::wlsxMonAPHTRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1,WLSX-MON-MIB::wlsxMonAPHTRateStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID:monHTRate,current,,Data rate based packet and byte count entry for a monitored AP
.1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1.1,WLSX-MON-MIB::monHTRate,INTEGER,read-only,,current,unknown(0):ht6dot5(1):ht13(2):ht13dot5(3):ht15(4):ht19dot5(5):ht26(6):ht27(7):ht30(8):ht39(9):ht40dot5(10):ht45(11):ht52(12):ht54(13):ht58dot5(14):ht60(15):ht65(16):ht78(17):ht81(18):ht90(19):ht104(20):ht108(21):ht117(22):ht120(23):ht121dot5(24):ht130(25):ht135(26):ht150(27):ht162(28):ht180(29):ht216(30):ht240(31):ht243(32):ht270(33):ht300(34), 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1.2,WLSX-MON-MIB::monAPStatsTotHTPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1.3,WLSX-MON-MIB::monAPStatsTotHTBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2,WLSX-MON-MIB::wlsxMonStationStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1,WLSX-MON-MIB::wlsxMonStationStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1,WLSX-MON-MIB::wlsxMonStationStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress,current,,Monitored Station Stats Entry
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.1,WLSX-MON-MIB::monitoredStaPhyAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.2,WLSX-MON-MIB::monStaChannelNum,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.3,WLSX-MON-MIB::monStaTxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.4,WLSX-MON-MIB::monStaTxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.5,WLSX-MON-MIB::monStaRxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.6,WLSX-MON-MIB::monStaRxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.7,WLSX-MON-MIB::monStaTxBCastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.8,WLSX-MON-MIB::monStaTxBCastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.9,WLSX-MON-MIB::monStaTxMCastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.10,WLSX-MON-MIB::monStaTxMCastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.11,WLSX-MON-MIB::monStaDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.12,WLSX-MON-MIB::monStaCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.13,WLSX-MON-MIB::monStaNumAssocRequests,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.14,WLSX-MON-MIB::monStaNumAuthRequests,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.15,WLSX-MON-MIB::monStaTxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.16,WLSX-MON-MIB::monStaRxDeauthentications,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.17,WLSX-MON-MIB::monStaFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.18,WLSX-MON-MIB::monStaFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.19,WLSX-MON-MIB::monStaFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.20,WLSX-MON-MIB::monStaFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.21,WLSX-MON-MIB::monStaFrameBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.22,WLSX-MON-MIB::monStaFrameRetryErrorRate,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.23,WLSX-MON-MIB::monStaBSSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.24,WLSX-MON-MIB::monStaESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.25,WLSX-MON-MIB::monStaPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.26,WLSX-MON-MIB::monStaRSSI,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.27,WLSX-MON-MIB::monStaFrameReceiveErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2,WLSX-MON-MIB::wlsxMonStaRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1,WLSX-MON-MIB::wlsxMonStaRateStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress,current,,Data rate based packet and byte count entry for a monitored station
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.1,WLSX-MON-MIB::monStaTxPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.2,WLSX-MON-MIB::monStaTxBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.3,WLSX-MON-MIB::monStaTxPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.4,WLSX-MON-MIB::monStaTxBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.5,WLSX-MON-MIB::monStaTxPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.6,WLSX-MON-MIB::monStaTxBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.7,WLSX-MON-MIB::monStaTxPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.8,WLSX-MON-MIB::monStaTxBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.9,WLSX-MON-MIB::monStaTxPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.10,WLSX-MON-MIB::monStaTxBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.11,WLSX-MON-MIB::monStaTxPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.12,WLSX-MON-MIB::monStaTxBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.13,WLSX-MON-MIB::monStaTxPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.14,WLSX-MON-MIB::monStaTxBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.15,WLSX-MON-MIB::monStaTxPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.16,WLSX-MON-MIB::monStaTxBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.17,WLSX-MON-MIB::monStaTxPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.18,WLSX-MON-MIB::monStaTxBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.19,WLSX-MON-MIB::monStaTxPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.20,WLSX-MON-MIB::monStaTxBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.21,WLSX-MON-MIB::monStaTxPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.22,WLSX-MON-MIB::monStaTxBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.23,WLSX-MON-MIB::monStaRxPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.24,WLSX-MON-MIB::monStaRxBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.25,WLSX-MON-MIB::monStaRxPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.26,WLSX-MON-MIB::monStaRxBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.27,WLSX-MON-MIB::monStaRxPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.28,WLSX-MON-MIB::monStaRxBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.29,WLSX-MON-MIB::monStaRxPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.30,WLSX-MON-MIB::monStaRxBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.31,WLSX-MON-MIB::monStaRxPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.32,WLSX-MON-MIB::monStaRxBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.33,WLSX-MON-MIB::monStaRxPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.34,WLSX-MON-MIB::monStaRxBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.35,WLSX-MON-MIB::monStaRxPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.36,WLSX-MON-MIB::monStaRxBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.37,WLSX-MON-MIB::monStaRxPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.38,WLSX-MON-MIB::monStaRxBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.39,WLSX-MON-MIB::monStaRxPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.40,WLSX-MON-MIB::monStaRxBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.41,WLSX-MON-MIB::monStaRxPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.42,WLSX-MON-MIB::monStaRxBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.43,WLSX-MON-MIB::monStaRxPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.44,WLSX-MON-MIB::monStaRxBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.45,WLSX-MON-MIB::monStaTxPktsAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.46,WLSX-MON-MIB::monStaTxBytesAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.47,WLSX-MON-MIB::monStaRxPktsAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.48,WLSX-MON-MIB::monStaRxBytesAt9Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3,WLSX-MON-MIB::wlsxMonStaDATypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1,WLSX-MON-MIB::wlsxMonStaDATypeStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress,current,,Data rate based packet and byte count entry for a monitored station
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.1,WLSX-MON-MIB::monStaTxDABroadcastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.2,WLSX-MON-MIB::monStaTxDABroadcastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.3,WLSX-MON-MIB::monStaTxDAMulticastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.4,WLSX-MON-MIB::monStaTxDAMulticastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.5,WLSX-MON-MIB::monStaTxDAUnicastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.6,WLSX-MON-MIB::monStaTxDAUnicastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4,WLSX-MON-MIB::wlsxMonStaFrameTypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1,WLSX-MON-MIB::wlsxMonStaFrameTypeStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress,current,,Frame Type based packet and byte count entry for a monitored station
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.1,WLSX-MON-MIB::monStaTxMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.2,WLSX-MON-MIB::monStaTxMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.3,WLSX-MON-MIB::monStaTxCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.4,WLSX-MON-MIB::monStaTxCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.5,WLSX-MON-MIB::monStaTxDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.6,WLSX-MON-MIB::monStaTxDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.7,WLSX-MON-MIB::monStaRxMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.8,WLSX-MON-MIB::monStaRxMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.9,WLSX-MON-MIB::monStaRxCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.10,WLSX-MON-MIB::monStaRxCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.11,WLSX-MON-MIB::monStaRxDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.12,WLSX-MON-MIB::monStaRxDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5,WLSX-MON-MIB::wlsxMonStaPktSizeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1,WLSX-MON-MIB::wlsxMonStaPktSizeStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress,current,,Packet Size based packet count entry for a monitored station
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.1,WLSX-MON-MIB::monStaTxPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.2,WLSX-MON-MIB::monStaTxPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.3,WLSX-MON-MIB::monStaTxPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.4,WLSX-MON-MIB::monStaTxPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.5,WLSX-MON-MIB::monStaTxPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.6,WLSX-MON-MIB::monStaTxPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.7,WLSX-MON-MIB::monStaRxPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.8,WLSX-MON-MIB::monStaRxPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.9,WLSX-MON-MIB::monStaRxPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.10,WLSX-MON-MIB::monStaRxPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.11,WLSX-MON-MIB::monStaRxPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.12,WLSX-MON-MIB::monStaRxPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.6,WLSX-MON-MIB::wlsxMonEventCountTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1,WLSX-MON-MIB::wlsxMonEventCountEntry,,not-accessible,monEventID,current,,Event Count Entry
.1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.1,WLSX-MON-MIB::monEventID,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.2,WLSX-MON-MIB::monEventCount,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.7,WLSX-MON-MIB::wlsxMonStationHTRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.6.2.7.1,WLSX-MON-MIB::wlsxMonStationHTRateStatsEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress:monHTRate,current,,HT Data rate based packet and byte count entry for a monitored station
.1.3.6.1.4.1.14823.2.2.1.6.6.2.7.1.1,WLSX-MON-MIB::monStaTxHTPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.7.1.2,WLSX-MON-MIB::monStaTxHTBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.7.1.3,WLSX-MON-MIB::monStaRxHTPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.6.2.7.1.4,WLSX-MON-MIB::monStaRxHTBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7,WLSX-MON-MIB::wlsxMonInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.6.7.1,WLSX-MON-MIB::wlsxMonAccessPointInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1,WLSX-MON-MIB::wlsxMonAPInfoTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1,WLSX-MON-MIB::wlsxMonAPInfoEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID,current,,Access Point Info entry
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.1,WLSX-MON-MIB::monAPInfoPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.2,WLSX-MON-MIB::monAPInfoCurrentChannel,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.3,WLSX-MON-MIB::monAPInfoClassification,INTEGER,read-only,,current,valid(1):interfering(2):unsecure(3):dos(4):unknown(5):knownInterfering(6):suspectedUnsecure(7), 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.4,WLSX-MON-MIB::monAPInfoESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.5,WLSX-MON-MIB::monAPInfoRSSI,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.6,WLSX-MON-MIB::monAPInfoMonitorTime,TimeTicks,read-only,,current,, This attribute indicates how long the access point has been 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.7,WLSX-MON-MIB::monAPInfoInactivityTime,TimeTicks,read-only,,current,, This attribute indicates how long the access point has been 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.8,WLSX-MON-MIB::monAPInfoSnrSignalPkts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.9,WLSX-MON-MIB::monAPInfoSnrSampleTime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.10,WLSX-MON-MIB::monAPInfoStatus,INTEGER,read-only,,current,up(1):down(2), 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.11,WLSX-MON-MIB::monAPInfoConfidence,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.12,WLSX-MON-MIB::monAPInfoMatchType,INTEGER,read-only,,current,unknown(0):configuredWiredMac(1):ethernetWiredMac(2):apWiredMac(3):externalWiredMac(4):manual(5):baseBSSIDOverride(6):mms(7):ethernetGatewayWiredMac(8):classificationDisabled(9):apBSSID(10):propagatedEthernetWiredMac(11):apRule(12):systemWiredMac(13):systemGatewayMac(14), 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.13,WLSX-MON-MIB::monAPInfoMatchMethod,INTEGER,read-only,,current,notApplicable(0):exactMatch(1):plusOneMatch(2):minusOneMatch(3):ouiMatch(4), 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.14,WLSX-MON-MIB::monAPInfoHTMode,INTEGER,read-only,,current,none(1):ht20(2):ht40(3):vht20(4):vht40(5):vht80(6):vht160(7):vht80plus80(8), 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.15,WLSX-MON-MIB::monAPInfoEncryptionType,INTEGER,read-only,,current,open(0):wep(1):wpa(2):wpa2(3), 
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.16,WLSX-MON-MIB::monAPInfoWPAUnicastCipher,INTEGER,read-only,,current,none(0):wep40(1):wep104(2):tkip(3):aesccmp(4):other(5), If multiple ciphers are supported, the weakest will be indicated.  
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.17,WLSX-MON-MIB::monAPInfoWPAAuthAlgorithm,INTEGER,read-only,,current,none(0):psk(1):dot1x(2):other(3), If multiple authentication algorithms are supported, the weakest will be indicated.  
.1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.18,WLSX-MON-MIB::monAPInfoIBSS,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.6.7.2,WLSX-MON-MIB::wlsxMonStationInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1,WLSX-MON-MIB::wlsxMonStationInfoTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1,WLSX-MON-MIB::wlsxMonStationInfoEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress,current,,Station Info Entry
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.1,WLSX-MON-MIB::monStaInfoChannelNum,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.2,WLSX-MON-MIB::monStaInfoBSSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.3,WLSX-MON-MIB::monStaInfoESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.4,WLSX-MON-MIB::monStaInfoPhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.5,WLSX-MON-MIB::monStaInfoRSSI,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.6,WLSX-MON-MIB::monStaInfoClassification,INTEGER,read-only,,current,unknown(0):valid(1):interfering(2):dos(3), 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.7,WLSX-MON-MIB::monStaInfoMonitorTime,TimeTicks,read-only,,current,, This attribute indicates how long the station has been 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.8,WLSX-MON-MIB::monStaInfoInactivityTime,TimeTicks,read-only,,current,, This attribute indicates how long the station has been 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.9,WLSX-MON-MIB::monStaInfoSnrSignalPkts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.10,WLSX-MON-MIB::monStaInfoSnrSampleTime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.11,WLSX-MON-MIB::monStaInfoStatus,INTEGER,read-only,,current,up(1):down(2), 
.1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.12,WLSX-MON-MIB::monStaInfoHTMode,INTEGER,read-only,,current,none(1):ht20(2):ht40(3):vht20(4):vht40(5):vht80(6):vht160(7):vht80plus80(8), 
.1.3.6.1.4.1.14823.2.2.1.7,WLSX-SNR-MIB::wlsxSNRMIB,,,,,, information about the Wireless Management System (WMS) in the 
.1.3.6.1.4.1.14823.2.2.1.7.1,WLSX-SNR-MIB::wlsxSNRGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.7.1.1,WLSX-SNR-MIB::wlsxAPSnrTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.7.1.1.1,WLSX-SNR-MIB::wlsxAPSnrEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredApBSSID,current,,Station Management Entry
.1.3.6.1.4.1.14823.2.2.1.7.1.1.1.1,WLSX-SNR-MIB::apSnrAverageSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.1.1.2,WLSX-SNR-MIB::apSnrSignalPkts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.1.1.3,WLSX-SNR-MIB::apSnrHighestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.1.1.4,WLSX-SNR-MIB::apSnrLowestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.1.1.5,WLSX-SNR-MIB::apSnrSampleTime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.2,WLSX-SNR-MIB::wlsxStaSnrTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.7.1.2.1,WLSX-SNR-MIB::wlsxStaSnrEntry,,not-accessible,monPhyAddress:monRadioNumber:monitoredStaPhyAddress,current,,Station Management Entry
.1.3.6.1.4.1.14823.2.2.1.7.1.2.1.1,WLSX-SNR-MIB::staSnrAverageSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.2.1.2,WLSX-SNR-MIB::staSnrSignalPkts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.2.1.3,WLSX-SNR-MIB::staSnrHighestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.2.1.4,WLSX-SNR-MIB::staSnrLowestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.2.1.5,WLSX-SNR-MIB::staSnrSampleTime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.3,WLSX-SNR-MIB::wlsxAPSnrBSSIDTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.7.1.3.1,WLSX-SNR-MIB::wlsxAPSnrBSSIDEntry,,not-accessible,monitoredApBSSID:monPhyAddress:monRadioNumber,current,,Station Management Entry
.1.3.6.1.4.1.14823.2.2.1.7.1.3.1.1,WLSX-SNR-MIB::apSnrBSSIDAverageSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.3.1.2,WLSX-SNR-MIB::apSnrBSSIDSignalPkts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.3.1.3,WLSX-SNR-MIB::apSnrBSSIDHighestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.3.1.4,WLSX-SNR-MIB::apSnrBSSIDLowestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.3.1.5,WLSX-SNR-MIB::apSnrBSSIDSampleTime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.4,WLSX-SNR-MIB::wlsxStaSnrPhyTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.7.1.4.1,WLSX-SNR-MIB::wlsxStaSnrPhyEntry,,not-accessible,monitoredStaPhyAddress:monPhyAddress:monRadioNumber,current,,Station Management Entry
.1.3.6.1.4.1.14823.2.2.1.7.1.4.1.1,WLSX-SNR-MIB::staSnrPhyAverageSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.4.1.2,WLSX-SNR-MIB::staSnrPhySignalPkts,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.4.1.3,WLSX-SNR-MIB::staSnrPhyHighestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.4.1.4,WLSX-SNR-MIB::staSnrPhyLowestRxSignalStrength,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.7.1.4.1.5,WLSX-SNR-MIB::staSnrPhySampleTime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8,WLSX-AUTH-MIB::wlsxAuthMIB,,,,,,This MIB module defines MIB objects which provide information about the authentication servers known to an 
.1.3.6.1.4.1.14823.2.2.1.8.1,WLSX-AUTH-MIB::wlsxAuthenticationServerGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.8.1.1,WLSX-AUTH-MIB::wlsxAuthenticationServerTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1,WLSX-AUTH-MIB::wlsxAuthenticationServerEntry,,not-accessible,authServerName,current,,Server entry
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.1,WLSX-AUTH-MIB::authServerName,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.2,WLSX-AUTH-MIB::authServerType,INTEGER,read-only,,current,internaldb(1):radius(2):ldap(3):kerberos(4):tacacs(5), 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.3,WLSX-AUTH-MIB::authServerAddress,OCTET,read-create,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.4,WLSX-AUTH-MIB::authServerPort,Integer32,read-create,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.5,WLSX-AUTH-MIB::authServerRetryCount,Integer32,read-create,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.6,WLSX-AUTH-MIB::authServerTimeOutValue,Integer32,read-create,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.7,WLSX-AUTH-MIB::authServerState,INTEGER,read-only,,current,enabled(1):disabled(2), 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.8,WLSX-AUTH-MIB::authServerInservice,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.9,WLSX-AUTH-MIB::authServerUsageCount,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.10,WLSX-AUTH-MIB::authServerSuccessfullAuths,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.11,WLSX-AUTH-MIB::authServerFailedAuths,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.12,WLSX-AUTH-MIB::authServerTimeouts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.13,WLSX-AUTH-MIB::authServerAvgResponseTime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.14,WLSX-AUTH-MIB::authServerOutStandingRequests,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.1.1.15,WLSX-AUTH-MIB::authServerUptime,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.2,WLSX-AUTH-MIB::wlsxPortalServerTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.8.1.2.1,WLSX-AUTH-MIB::wlsxPortalServerEntry,,not-accessible,portalServerIndex,current,,Portal Server Entry
.1.3.6.1.4.1.14823.2.2.1.8.1.2.1.1,WLSX-AUTH-MIB::portalServerIndex,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.2.1.2,WLSX-AUTH-MIB::portalServerHost,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.2.1.3,WLSX-AUTH-MIB::portalServerPort,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.2.1.4,WLSX-AUTH-MIB::portalServerPage,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.2.1.5,WLSX-AUTH-MIB::portalServerProtocol,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.1.5,WLSX-AUTH-MIB::wlsxLdapServerStateTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.8.1.5.1,WLSX-AUTH-MIB::wlsxLdapServerStateEntry,,not-accessible,authServerName,current,,LDAP Server Entry
.1.3.6.1.4.1.14823.2.2.1.8.1.5.1.1,WLSX-AUTH-MIB::ldapInitDone,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.8.1.5.1.2,WLSX-AUTH-MIB::ldapAdminBound,INTEGER,read-only,,current,no(1):yes(2):inProgress(3), 
.1.3.6.1.4.1.14823.2.2.1.8.1.5.1.3,WLSX-AUTH-MIB::ldapReBindCount,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.8.2,WLSX-AUTH-MIB::wlsxAuthenticationInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.8.3,WLSX-AUTH-MIB::wlsxAuthenticationGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.9,WLSX-MOBILITY-MIB::wlsxMobilityMIB,,,,,,This MIB module defines MIB objects which provide information about the mobility subsystem in the
.1.3.6.1.4.1.14823.2.2.1.9.1,WLSX-MOBILITY-MIB::wlsxMobilityConfigGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.9.1.1,WLSX-MOBILITY-MIB::wlsxMobilityDomainTable,,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.1.1.1,WLSX-MOBILITY-MIB::wlsxMobilityDomainEntry,,not-accessible,mobilityDomainName,current,,Mobility Domain Entry
.1.3.6.1.4.1.14823.2.2.1.9.1.1.1.1,WLSX-MOBILITY-MIB::mobilityDomainName,OCTET,not-accessible,,current,,The name of the active mobility domain(s) this controller belongs to
.1.3.6.1.4.1.14823.2.2.1.9.1.1.1.2,WLSX-MOBILITY-MIB::mobilityDomainIsExclusive,INTEGER,read-only,,deprecated,enabled(1):disabled(2),Indicates whether this mobility domain is exclusive or not.
.1.3.6.1.4.1.14823.2.2.1.9.1.1.1.3,WLSX-MOBILITY-MIB::mobilityDomainStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status object used to indicate the status of the row
.1.3.6.1.4.1.14823.2.2.1.9.1.3,WLSX-MOBILITY-MIB::wlsxMobilityHomeAgentTable,,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.1.3.1,WLSX-MOBILITY-MIB::wlsxMobilityHomeAgentEntry,,not-accessible,mobilityHomeAgentSubnet:mobilityHomeAgentMask:mobilityHomeAgentIp,current,,Mobility Home Agent Entry
.1.3.6.1.4.1.14823.2.2.1.9.1.3.1.1,WLSX-MOBILITY-MIB::mobilityHomeAgentSubnet,IpAddress,read-only,,current,,Subnet of the home agent
.1.3.6.1.4.1.14823.2.2.1.9.1.3.1.2,WLSX-MOBILITY-MIB::mobilityHomeAgentMask,IpAddress,read-only,,current,,Subnet mask of the home agent
.1.3.6.1.4.1.14823.2.2.1.9.1.3.1.3,WLSX-MOBILITY-MIB::mobilityHomeAgentIp,IpAddress,not-accessible,,current,,IP address of the home agent
.1.3.6.1.4.1.14823.2.2.1.9.1.3.1.4,WLSX-MOBILITY-MIB::mobilityHomeAgentVlan,Integer32,read-only,,current,,Vlan of the home agent
.1.3.6.1.4.1.14823.2.2.1.9.1.4,WLSX-MOBILITY-MIB::wlsxMobilityHostTable,,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1,WLSX-MOBILITY-MIB::wlsxMobilityHostEntry,,not-accessible,mobilityHostMac,current,,Mobility Host Home Agent Entry
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.1,WLSX-MOBILITY-MIB::mobilityHostMac,OCTET,not-accessible,,current,,MAC address of the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.2,WLSX-MOBILITY-MIB::mobilityHostIp,IpAddress,read-only,,current,,IP address of the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.3,WLSX-MOBILITY-MIB::mobilityHostStatus,OCTET,read-only,,current,,Roaming status of the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.4,WLSX-MOBILITY-MIB::mobilityHostServiceTime,Integer32,read-only,,current,,Time in seconds mobility service is provided to the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.5,WLSX-MOBILITY-MIB::mobilityHostHomeVlan,Integer32,read-only,,current,,Home VLAN of the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.6,WLSX-MOBILITY-MIB::mobilityHostHomeNetwork,IpAddress,read-only,,current,,Home network of the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.7,WLSX-MOBILITY-MIB::mobilityHostHomeMask,IpAddress,read-only,,current,,Home network mask of the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.1.4.1.8,WLSX-MOBILITY-MIB::mobilityHostDhcpInfo,OCTET,read-only,,current,,DHCP details of the mobile host
.1.3.6.1.4.1.14823.2.2.1.9.2,WLSX-MOBILITY-MIB::wlsxMobilityProxyStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.9.2.1,WLSX-MOBILITY-MIB::mobilityProxyPktRx,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.2.2,WLSX-MOBILITY-MIB::mobilityProxyPktHandled,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.2.3,WLSX-MOBILITY-MIB::mobilityProxyPktFwd,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.2.4,WLSX-MOBILITY-MIB::mobilityProxyPktDrop,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.2.5,WLSX-MOBILITY-MIB::mobilityProxyBusy,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.2.6,WLSX-MOBILITY-MIB::mobilityProxyNoMobility,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.2.7,WLSX-MOBILITY-MIB::mobilityProxyClientIPChg,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.2.8,WLSX-MOBILITY-MIB::mobilityProxyClientEssidChg,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3,WLSX-MOBILITY-MIB::wlsxMobilityProxyDHCPStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.9.3.1,WLSX-MOBILITY-MIB::mobilityProxyDhcpBootpRx,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.2,WLSX-MOBILITY-MIB::mobilityProxyDhcpPktProc,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.3,WLSX-MOBILITY-MIB::mobilityProxyDhcpPktFwd,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.4,WLSX-MOBILITY-MIB::mobilityProxyDhcpPktDrop,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.5,WLSX-MOBILITY-MIB::mobilityProxyDHCPNak,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.6,WLSX-MOBILITY-MIB::mobilityProxyBadDHCPPkt,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.7,WLSX-MOBILITY-MIB::mobilityProxyNotDHCP,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.8,WLSX-MOBILITY-MIB::mobilityProxyDHCPNoHomeVlan,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.9,WLSX-MOBILITY-MIB::mobilityProxyDHCPUnexpFrame,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.3.10,WLSX-MOBILITY-MIB::mobilityProxyDHCPUnexpRemote,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4,WLSX-MOBILITY-MIB::wlsxMobilityHAStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.9.4.1,WLSX-MOBILITY-MIB::mobilityHARxRRQ,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.2,WLSX-MOBILITY-MIB::mobilityHASentRRP,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.3,WLSX-MOBILITY-MIB::mobilityHARRQAccept,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.4,WLSX-MOBILITY-MIB::mobilityHARRQDenied,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.5,WLSX-MOBILITY-MIB::mobilityHARRQIgnore,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.6,WLSX-MOBILITY-MIB::mobilityHARRQAdminDeny,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.7,WLSX-MOBILITY-MIB::mobilityHARRQNoResource,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.8,WLSX-MOBILITY-MIB::mobilityHAMNauthFail,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.9,WLSX-MOBILITY-MIB::mobilityHAFAauthFail,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.10,WLSX-MOBILITY-MIB::mobilityHABadID,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.11,WLSX-MOBILITY-MIB::mobilityHAMalform,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.12,WLSX-MOBILITY-MIB::mobilityHATooManyBnd,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.4.13,WLSX-MOBILITY-MIB::mobilityHABndExpire,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5,WLSX-MOBILITY-MIB::wlsxMobilityFAStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.9.5.1,WLSX-MOBILITY-MIB::mobilityFASentRRQ,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5.2,WLSX-MOBILITY-MIB::mobilityFARcvRRP,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5.3,WLSX-MOBILITY-MIB::mobilityFARRQAccept,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5.4,WLSX-MOBILITY-MIB::mobilityFARRQReject,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5.5,WLSX-MOBILITY-MIB::mobilityMNHAauthFAIL,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5.6,WLSX-MOBILITY-MIB::mobilityFAHAauthFAIL,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5.7,WLSX-MOBILITY-MIB::mobilityFABadID,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.5.8,WLSX-MOBILITY-MIB::mobilityFAMalform,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.6,WLSX-MOBILITY-MIB::wlsxMobilityHAFARevocationStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.9.6.1,WLSX-MOBILITY-MIB::mobilitySentRRVRQ,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.6.2,WLSX-MOBILITY-MIB::mobilityRcvRRVAck,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.6.3,WLSX-MOBILITY-MIB::mobilityRcvRRV,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.6.4,WLSX-MOBILITY-MIB::mobilitySentRRVAck,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.6.5,WLSX-MOBILITY-MIB::mobilityRRVRQIgnore,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.9.6.6,WLSX-MOBILITY-MIB::mobilityRRVAckIgnore,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.10,WLSX-ESI-MIB::wlsxESIMIB,,,,,,This MIB module defines MIB objects which provide information about the External Services Interface (ESI) in the 
.1.3.6.1.4.1.14823.2.2.1.10.1,WLSX-ESI-MIB::wlsxESIConfigGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.10.1.1,WLSX-ESI-MIB::wlsxESIServerTable,,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1,WLSX-ESI-MIB::wlsxESIServerEntry,,not-accessible,esiServerName,current,,ESI Server Entry
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.1,WLSX-ESI-MIB::esiServerName,OCTET,not-accessible,,current,,The name of the ESI Server
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.2,WLSX-ESI-MIB::esiServerGroup,OCTET,read-only,,current,,The name of the ESI server group to which this server belongs.
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.3,WLSX-ESI-MIB::esiServerMode,INTEGER,read-only,,current,bridged(1):routed(2):nat(3),The mode of this server
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.4,WLSX-ESI-MIB::esiServerTrustedIP,IpAddress,read-only,,current,,The trusted IP address of this server, or 0.0.0.0 if it is not set
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.5,WLSX-ESI-MIB::esiServerUntrustedIP,IpAddress,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.6,WLSX-ESI-MIB::esiServerTrustedSlot,Integer32,read-only,,current,,The slot number of the trusted interface for this server.
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.7,WLSX-ESI-MIB::esiServerTrustedPort,Integer32,read-only,,current,,The port number of the trusted interface for this server.
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.8,WLSX-ESI-MIB::esiServerUntrustedSlot,Integer32,read-only,,current,,The slot number of the untrusted interface for this server.
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.9,WLSX-ESI-MIB::esiServerUntrustedPort,Integer32,read-only,,current,,The port number of the untrusted interface for this server.
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.10,WLSX-ESI-MIB::esiServerStatus,INTEGER,read-only,,current,up(1):down(2),Indicates the status of this ESI server.
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.11,WLSX-ESI-MIB::esiServerTrustedModule,Integer32,read-only,,current,,The module number of the trusted interface for this server.
.1.3.6.1.4.1.14823.2.2.1.10.1.1.1.12,WLSX-ESI-MIB::esiServerUntrustedModule,Integer32,read-only,,current,,The module number of the untrusted interface for this server.
.1.3.6.1.4.1.14823.2.2.1.11,WLSX-CTS-MIB::wlsxCtsMIB,,,,,,This MIB module defines MIB objects which provide information about the Controller Transport Service (Cts) in the 
.1.3.6.1.4.1.14823.2.2.1.11.1,WLSX-CTS-MIB::wlsxCtsOpGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.11.1.1,WLSX-CTS-MIB::wlsxCtsRequestTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.11.1.1.1,WLSX-CTS-MIB::wlsxCtsRequestEntry,,not-accessible,wlsxCtsIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.11.1.1.1.1,WLSX-CTS-MIB::wlsxCtsIndex,Integer32,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.11.1.1.1.2,WLSX-CTS-MIB::wlsxCtsOpcode,OCTET,read-write,,current,,
.1.3.6.1.4.1.14823.2.2.1.11.1.1.1.3,WLSX-CTS-MIB::wlsxCtsCookie,OCTET,read-write,,current,,
.1.3.6.1.4.1.14823.2.2.1.11.1.1.1.4,WLSX-CTS-MIB::wlsxCtsURL,OCTET,read-write,,current,,
.1.3.6.1.4.1.14823.2.2.1.11.1.1.1.5,WLSX-CTS-MIB::wlsxCtsFlags,BITS,read-write,,current,wlsxCtsFlagForce(0):wlsxCtsFlagUseCert(1),
.1.3.6.1.4.1.14823.2.2.1.11.1.1.1.6,WLSX-CTS-MIB::wlsxCtsStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.14823.2.2.1.12,WLSX-VOICE-MIB::wlsxVoiceMIB,,,,,,This MIB module defines MIB objects which provide information about Voice call status and call detail reporting
.1.3.6.1.4.1.14823.2.2.1.12.1,WLSX-VOICE-MIB::wlsxVoiceStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.12.1.1,WLSX-VOICE-MIB::wlsxVoiceCdrInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.12.1.1.1,WLSX-VOICE-MIB::wlsxVoiceCdrTotal,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2,WLSX-VOICE-MIB::wlsxVoiceCdrTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1,WLSX-VOICE-MIB::wlsxVoiceCdrEntry,,not-accessible,voiceCdrId,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.1,WLSX-VOICE-MIB::voiceCdrId,Unsigned32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.2,WLSX-VOICE-MIB::voiceCdrIp,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.3,WLSX-VOICE-MIB::voiceCdrMac,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.4,WLSX-VOICE-MIB::voiceCdrName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.5,WLSX-VOICE-MIB::voiceCdrDialNum,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.6,WLSX-VOICE-MIB::voiceCdrDir,INTEGER,read-only,,current,og(0):ic(1), 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.7,WLSX-VOICE-MIB::voiceCdrOrigTime,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.8,WLSX-VOICE-MIB::voiceCdrSetupTime,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.9,WLSX-VOICE-MIB::voiceCdrTeardownTime,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.10,WLSX-VOICE-MIB::voiceCdrStatus,INTEGER,read-only,,current,idle(0):initiated(1):connecting(2):delivered(3):connected(4):offered(5):alerting(6):releasing(7):cancelling(8):challenging(9):transient(10):blockwait(11):succ(12):fail(13):aborted(14):blocked(15), 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.11,WLSX-VOICE-MIB::voiceCdrReason,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.12,WLSX-VOICE-MIB::voiceCdrDuration,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.13,WLSX-VOICE-MIB::voiceCdrRValue,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.14,WLSX-VOICE-MIB::voiceCdrApSwitchDelay,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.15,WLSX-VOICE-MIB::voiceCdrCodec,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.16,WLSX-VOICE-MIB::voiceCdrApName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.17,WLSX-VOICE-MIB::voiceCdrApMac,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.18,WLSX-VOICE-MIB::voiceCdrBssid,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.19,WLSX-VOICE-MIB::voiceCdrEssid,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.20,WLSX-VOICE-MIB::voiceCdrHandovers,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.21,WLSX-VOICE-MIB::voiceCdrMOS,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2,WLSX-VOICE-MIB::wlsxVoiceCallCtrsGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.12.1.2.1,WLSX-VOICE-MIB::voiceCallCtrsTotal,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.2,WLSX-VOICE-MIB::voiceCallCtrsSuccess,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.3,WLSX-VOICE-MIB::voiceCallCtrsFailed,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.4,WLSX-VOICE-MIB::voiceCallCtrsRejected,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.5,WLSX-VOICE-MIB::voiceCallCtrsAborted,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.6,WLSX-VOICE-MIB::voiceCallCtrsOrig,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.7,WLSX-VOICE-MIB::voiceCallCtrsRecvd,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.8,WLSX-VOICE-MIB::voiceCallCtrsActive,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.9,WLSX-VOICE-MIB::voiceCallCtrsNotFnd,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.10,WLSX-VOICE-MIB::voiceCallCtrsBusy,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.11,WLSX-VOICE-MIB::voiceCallCtrsSvc,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.12,WLSX-VOICE-MIB::voiceCallCtrsReqTerm,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.13,WLSX-VOICE-MIB::voiceCallCtrsDecline,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.14,WLSX-VOICE-MIB::voiceCallCtrsUnauth,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.2.15,WLSX-VOICE-MIB::voiceCallCtrsMisc,Unsigned32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.3,WLSX-VOICE-MIB::wlsxVoiceClientInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.12.1.3.1,WLSX-VOICE-MIB::wlsxVoiceClientTotal,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2,WLSX-VOICE-MIB::wlsxVoiceClientTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1,WLSX-VOICE-MIB::wlsxVoiceClientEntry,,not-accessible,wlanStaPhyAddress,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.1,WLSX-VOICE-MIB::voiceClientIp,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.2,WLSX-VOICE-MIB::voiceClientProtocol,INTEGER,read-only,,current,sccp(1):svp(2):vocera(3):sip(9):ua(11):h323(13), 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.3,WLSX-VOICE-MIB::voiceClientRegState,INTEGER,read-only,,current,unknown(0):registering(1):unregistering(2):challenge(3):registered(4):unregistered(5), 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.4,WLSX-VOICE-MIB::voiceClientContactName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.5,WLSX-VOICE-MIB::voiceClientServerName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.6,WLSX-VOICE-MIB::voiceClientEssid,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.7,WLSX-VOICE-MIB::voiceClientVlanId,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.8,WLSX-VOICE-MIB::voiceClientTunnelId,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4,WLSX-VOICE-MIB::wlsxVoiceAPBssidInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.12.1.4.1,WLSX-VOICE-MIB::wlsxVoiceAPBssidTotal,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2,WLSX-VOICE-MIB::wlsxVoiceAPBssidTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1,WLSX-VOICE-MIB::wlsxVoiceAPBssidEntry,,not-accessible,wlanAPMacAddress:wlanAPRadioNumber:wlanAPBSSID,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.1,WLSX-VOICE-MIB::voiceAPBssidName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.2,WLSX-VOICE-MIB::voiceAPBssidGroup,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.3,WLSX-VOICE-MIB::voiceAPBssidIp,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.4,WLSX-VOICE-MIB::voiceAPBssidTotCalls,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.5,WLSX-VOICE-MIB::voiceAPBssidVoiceType,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.6,WLSX-VOICE-MIB::voiceAPBssidFlag,BITS,read-only,,current,apRemoteAP(0):apPPPOE(1):apWiredApEnabled(2):apEnet1Mode(3):apActiveLoadBalancing(4):apDisconnectExtraCalls(5):apBatteryBoost(6), 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.7,WLSX-VOICE-MIB::voiceAPBssidUpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.8,WLSX-VOICE-MIB::voiceAPBssid100Sent,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.9,WLSX-VOICE-MIB::voiceAPBssid503Sent,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.10,WLSX-VOICE-MIB::voiceAPBssidExtraCallDisc,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.11,WLSX-VOICE-MIB::voiceAPBssidKickedOff,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.12,WLSX-VOICE-MIB::voiceAPBssidTspecDenied,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.13,WLSX-VOICE-MIB::voiceAPBssidCacFlag,BITS,read-only,,current,cacActiveLoadBalancing(0):cacHighCapThresholdReached(1):cacHandRsrvThresholdReached(2):cacPeakCapacityReached(3), 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.14,WLSX-VOICE-MIB::voiceAPBssidTotVoiceClients,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.15,WLSX-VOICE-MIB::voiceAPBssidCallsSCCP,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.16,WLSX-VOICE-MIB::voiceAPBssidCallsSIP,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.17,WLSX-VOICE-MIB::voiceAPBssidCallsSVP,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.18,WLSX-VOICE-MIB::voiceAPBssidCallsVocera,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.19,WLSX-VOICE-MIB::voiceAPBssidCallsNoe,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.20,WLSX-VOICE-MIB::voiceAPBssidEssid,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.21,WLSX-VOICE-MIB::voiceAPBssidCallsSIPS,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5,WLSX-VOICE-MIB::wlsxVoiceClientLocationInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.12.1.5.1,WLSX-VOICE-MIB::wlsxVoiceClientLocationTotal,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2,WLSX-VOICE-MIB::wlsxVoiceClientLocationTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1,WLSX-VOICE-MIB::wlsxVoiceClientLocationEntry,,not-accessible,wlanStaPhyAddress,current,,
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1.1,WLSX-VOICE-MIB::vcLocationIp,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1.2,WLSX-VOICE-MIB::vcLocationMac,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1.3,WLSX-VOICE-MIB::vcLocationSwitchIp,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1.4,WLSX-VOICE-MIB::vcLocationApName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1.5,WLSX-VOICE-MIB::vcLocationApMac,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1.6,WLSX-VOICE-MIB::vcLocationApMode,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.12.1.5.2.1.7,WLSX-VOICE-MIB::vcLocationApLoc,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13,WLSX-MESH-MIB::wlsxMeshMIB,,,,,,This MIB module defines MIB objects which provides information about Mesh portal and topology 
.1.3.6.1.4.1.14823.2.2.1.13.1,WLSX-MESH-MIB::wlsxMeshInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.13.1.1,WLSX-MESH-MIB::wlsxMeshNodeGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.13.1.1.1,WLSX-MESH-MIB::wlsxMeshNodeTotal,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2,WLSX-MESH-MIB::wlsxMeshNodeTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1,WLSX-MESH-MIB::wlsxMeshNodeEntry,,not-accessible,wlanAPMacAddress,current,,
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.1,WLSX-MESH-MIB::wlsxMeshRole,INTEGER,read-write,,current,nonmesh(0):point(1):portal(2), 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.2,WLSX-MESH-MIB::wlsxMeshNodeParent,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.3,WLSX-MESH-MIB::wlsxMeshNodeChildrenCount,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.4,WLSX-MESH-MIB::wlsxMeshNodeCluster,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.5,WLSX-MESH-MIB::wlsxMeshNodeRfBand,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.6,WLSX-MESH-MIB::wlsxMeshNodePathCost,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.7,WLSX-MESH-MIB::wlsxMeshNodeNodeCost,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.8,WLSX-MESH-MIB::wlsxMeshNodeLinkCost,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.9,WLSX-MESH-MIB::wlsxMeshNodeHopCount,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.10,WLSX-MESH-MIB::wlsxMeshSNR,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.11,WLSX-MESH-MIB::wlsxMeshTxRate,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.12,WLSX-MESH-MIB::wlsxMeshRxRate,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.13,WLSX-MESH-MIB::wlsxMeshUplinkAge,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.14,WLSX-MESH-MIB::wlsxMeshNumRecoveryChildren,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.15,WLSX-MESH-MIB::wlsxMeshTopologyUpdateAge,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.16,WLSX-MESH-MIB::wlsxMeshIsRecovery,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.17,WLSX-MESH-MIB::wlsxMeshIs11n,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.14,WLSX-USER6-MIB::wlsxUser6MIB,,,,,,This MIB module defines MIB objects which provide information about the IPv6 users in an Aruba controller.
.1.3.6.1.4.1.14823.2.2.1.14.1,WLSX-USER6-MIB::wlsxUser6AllInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.14.1.1,WLSX-USER6-MIB::wlsxTotalNumOfUsers6,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2,WLSX-USER6-MIB::wlsxUser6Table,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1,WLSX-USER6-MIB::wlsxUser6Entry,,not-accessible,nUser6PhyAddress:nUser6IpAddress,current,,User Entry
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.1,WLSX-USER6-MIB::nUser6PhyAddress,OCTET,not-accessible,,current,, MAC address of the station from which the user connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.2,WLSX-USER6-MIB::nUser6IpAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.3,WLSX-USER6-MIB::nUser6Name,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.4,WLSX-USER6-MIB::nUser6Role,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.5,WLSX-USER6-MIB::nUser6UpTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.6,WLSX-USER6-MIB::nUser6AuthenticationMethod,INTEGER,read-only,,current,none(0):web(1):mac(2):vpn(3):dot1x(4):kerberos(5):secureId(7):pubcookie(15):xSec(16):xSecMachine(17):via-vpn(28):other(255), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.7,WLSX-USER6-MIB::nUser6SubAuthenticationMethod,INTEGER,read-only,,current,authPAP(1):authCHAP(2):authMSCHAP(3):authMSCHAPv2(4):eapTLS(5):eapTTLS(6):eapLEAP(7):eapMD5(8):eapPEAP(9), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.8,WLSX-USER6-MIB::nUser6AuthServerName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.9,WLSX-USER6-MIB::nUser6ExtVPNAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.10,WLSX-USER6-MIB::nUser6ApLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.11,WLSX-USER6-MIB::nUser6ApBSSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.12,WLSX-USER6-MIB::nUser6IsOnHomeAgent,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.13,WLSX-USER6-MIB::nUser6HomeAgentIpAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.14,WLSX-USER6-MIB::nUser6MobilityStatus,INTEGER,read-only,,current,visitor(1):away(2):associated(3):wired(4):wireless(5), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.15,WLSX-USER6-MIB::nUser6HomeVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.16,WLSX-USER6-MIB::nUser6DefaultVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.17,WLSX-USER6-MIB::nUser6AssignedVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.18,WLSX-USER6-MIB::nUser6BWContractName,OCTET,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.19,WLSX-USER6-MIB::nUser6BWContractUsage,INTEGER,read-only,,deprecated,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.20,WLSX-USER6-MIB::nUser6BWContractId,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.21,WLSX-USER6-MIB::nUser6IsProxyArpEnabled,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.22,WLSX-USER6-MIB::nUser6CurrentVlan,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.23,WLSX-USER6-MIB::nUser6IsWired,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.24,WLSX-USER6-MIB::nUser6ConnectedSlot,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.25,WLSX-USER6-MIB::nUser6ConnectedPort,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.26,WLSX-USER6-MIB::nUser6PhyType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3):dot11ag(4):wired(5), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.27,WLSX-USER6-MIB::nUser6MobilityDomainName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.28,WLSX-USER6-MIB::nUser6UPBWContractName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.29,WLSX-USER6-MIB::nUser6UPBWContractUsage,INTEGER,read-only,,current,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.30,WLSX-USER6-MIB::nUser6UPBWContractId,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.31,WLSX-USER6-MIB::nUser6DNBWContractName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.32,WLSX-USER6-MIB::nUser6DNBWContractUsage,INTEGER,read-only,,current,user(1):shared(2), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.33,WLSX-USER6-MIB::nUser6DNBWContractId,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.34,WLSX-USER6-MIB::nUser6HTMode,INTEGER,read-only,,current,none(1):ht20(2):ht40(3):vht20(4):vht40(5):vht80(6):vht160(7):vht80plus80(8), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.35,WLSX-USER6-MIB::nUser6DeviceID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.36,WLSX-USER6-MIB::nUser6DeviceType,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.37,WLSX-USER6-MIB::nUser6ConnectedModule,Integer32,read-only,,current,, The module to which the user is connected, if wired. 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.38,WLSX-USER6-MIB::nUser6RxDataPkts64,Counter64,read-only,,current,, This object specifies number of packets received by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.39,WLSX-USER6-MIB::nUser6TxDataPkts64,Counter64,read-only,,current,, This object specifies number of packets transmitted by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.40,WLSX-USER6-MIB::nUser6RxDataOctets64,Counter64,read-only,,current,, This object specifies number of octets received by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.41,WLSX-USER6-MIB::nUser6TxDataOctets64,Counter64,read-only,,current,, This object specifies number of octets transmitted by this IP for which this user is connected to the controller. 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.42,WLSX-USER6-MIB::nUser6ForwardMode,INTEGER,read-only,,current,tunnel-encrypted(0):bridge(1):tunnel-decrypted(2):split-tunnel(3), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.43,WLSX-USER6-MIB::nUser6EncryptionMethod,INTEGER,read-only,,current,none(0):static-wep(1):dynamic-wep(2):wpa-psk-tkip(3):wpa-tkip(4):wpa-psk-aes(5):wpa-aes(6):wpa2-psk-tkip(7):wpa2-tkip(8):wpa2-psk-aes(9):wpa2-aes(10):xSec(11):bSec-128(12):bSec-256(13):aes-128-cmac(14):unknown(15), 
.1.3.6.1.4.1.14823.2.2.1.14.1.2.1.44,WLSX-USER6-MIB::nVIAUser6DeviceID,OCTET,read-only,,current,, MAC address of the station from which the user connected to the controller using VIA. 
.1.3.6.1.4.1.14823.2.2.1.14.1.3,WLSX-USER6-MIB::wlsxUser6SessionTimeTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.14.1.3.1,WLSX-USER6-MIB::wlsxUser6SessionTimeEntry,,not-accessible,wlanESSID:wlsxUser6SessionTimeLength,current,,
.1.3.6.1.4.1.14823.2.2.1.14.1.3.1.1,WLSX-USER6-MIB::wlsxUser6SessionTimeLength,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.14.1.3.1.2,WLSX-USER6-MIB::wlsxUser6SessionTimeCount,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.15,WLSX-STATS-MIB::wlsxStatsMIB,,,,,,This MIB module defines MIB objects which provide information about the Statistics in the 
.1.3.6.1.4.1.14823.2.2.1.15.1,WLSX-STATS-MIB::wlsxStatsOpGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.15.1.1,WLSX-STATS-MIB::wlsxStatsRequestTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.15.1.1.1,WLSX-STATS-MIB::wlsxStatsRequestEntry,,not-accessible,wlsxStatsIndex,current,,
.1.3.6.1.4.1.14823.2.2.1.15.1.1.1.1,WLSX-STATS-MIB::wlsxStatsIndex,Integer32,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.15.1.1.1.2,WLSX-STATS-MIB::wlsxStatsReqType,Integer32,read-write,,current,,
.1.3.6.1.4.1.14823.2.2.1.15.1.1.1.3,WLSX-STATS-MIB::wlsxStatsInterval,Integer32,read-write,,current,,
.1.3.6.1.4.1.14823.2.2.1.15.1.1.1.4,WLSX-STATS-MIB::wlsxStatsCookie,OCTET,read-write,,current,,
.1.3.6.1.4.1.14823.2.2.1.16,WLSX-RS-MIB::wlsxRSMIB,,,,,,This MIB module defines MIB objects which provide information about remote user and node state.
.1.3.6.1.4.1.14823.2.2.1.16.1,WLSX-RS-MIB::wlsxRemoteWiredGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.16.1.1,WLSX-RS-MIB::wlsxRemoteAccessPointPortGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1,WLSX-RS-MIB::wlsxRemoteWiredPortTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1,WLSX-RS-MIB::wlsxRemotePortEntry,,not-accessible,wlanAPMacAddress:remotePortNumber,current,,Wired Port Entry
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.1,WLSX-RS-MIB::remotePortNumber,Unsigned32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.2,WLSX-RS-MIB::remotePortMAC,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.3,WLSX-RS-MIB::remotePortMode,INTEGER,read-only,,current,activeStandby(1):tunnel(2):bridge(3):notApplicable(4):split(5), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.4,WLSX-RS-MIB::remotePortSlotNumber,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.5,WLSX-RS-MIB::remotePortPortNumber,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.6,WLSX-RS-MIB::remotePortType,INTEGER,read-only,,current,fastethernet(1):gigabitethernet(2):xgigabitethernet(3), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.7,WLSX-RS-MIB::remotePortAdminState,INTEGER,read-only,,current,enabled(1):disabled(2), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.8,WLSX-RS-MIB::remotePortOperState,INTEGER,read-only,,current,up(1):down(2):testing(3), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.9,WLSX-RS-MIB::remotePortSpeed,INTEGER,read-only,,current,speed10Mbps(1):speed100Mbps(2):speed1000Mbps(3):speedAuto(4):speed10Gbps(5), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.10,WLSX-RS-MIB::remotePortDuplex,INTEGER,read-only,,current,half(1):full(2):auto(3), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.11,WLSX-RS-MIB::remotePortTxPackets,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.12,WLSX-RS-MIB::remotePortTxBytes,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.13,WLSX-RS-MIB::remotePortRxPackets,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.14,WLSX-RS-MIB::remotePortRxBytes,Counter64,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.15,WLSX-RS-MIB::remotePortDot3azStatus,BITS,read-only,,current,disabled(0):unsupported(1):eee100BaseTX(2):eee1000BaseT(3):eee10GBaseT(4):eee1000BaseKX(5):eee10GBaseKX4(6):eee10GBaseKR(7), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.16,WLSX-RS-MIB::remotePortName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.17,WLSX-RS-MIB::remotePortPoEState,INTEGER,read-only,,current,disabled(1):enabled(2):enabledCisco(3):notAvailable(4), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.1.1.18,WLSX-RS-MIB::remotePortSTPState,INTEGER,read-only,,current,notAvailable(1):off(2):disabled(3):listening(4):learning(5):forwarding(6):blocking(7), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2,WLSX-RS-MIB::wlsxRemoteWiredUserStatsTable,,not-accessible,,current,, This table enumerates the wired user statistics on the device 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1,WLSX-RS-MIB::wlsxRemoteWiredUserStatsEntry,,not-accessible,remoteWiredUserPhyAddress,current,,Wired User Stats Entry
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.1,WLSX-RS-MIB::remoteWiredUserPhyAddress,OCTET,not-accessible,,current,, The Physical Address of the Wired User. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.2,WLSX-RS-MIB::remoteWiredUserSlot,Unsigned32,read-only,,current,, The Physical slot to which this user is connected to. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.3,WLSX-RS-MIB::remoteWiredUserPort,Unsigned32,read-only,,current,, The Physical port to which this user is connected to. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.4,WLSX-RS-MIB::remoteWiredUserVlan,Unsigned32,read-only,,current,, The VLAN to which this user is connected to. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.5,WLSX-RS-MIB::remoteWiredUserTxPkts,Counter32,read-only,,current,, The number of packets transmitted by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.6,WLSX-RS-MIB::remoteWiredUserTxBytes,Counter32,read-only,,current,, The number of bytes transmitted by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.7,WLSX-RS-MIB::remoteWiredUserRxPkts,Counter32,read-only,,current,, The number of packets received by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.8,WLSX-RS-MIB::remoteWiredUserRxBytes,Counter32,read-only,,current,, The number of bytes received by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.9,WLSX-RS-MIB::remoteWiredUserTxBCastPkts,Counter32,read-only,,current,, The number of broadcast packets transmitted by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.10,WLSX-RS-MIB::remoteWiredUserTxBCastBytes,Counter32,read-only,,current,, The number of broadcast bytes transmitted by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.11,WLSX-RS-MIB::remoteWiredUserTxMCastPkts,Counter32,read-only,,current,, The number of multicast packets transmitted by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.2.1.12,WLSX-RS-MIB::remoteWiredUserTxMCastBytes,Counter32,read-only,,current,, The number of multicast bytes transmitted by this user. 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3,WLSX-RS-MIB::wlsxLldpNeighborTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1,WLSX-RS-MIB::wlsxLldpNeighborEntry,,not-accessible,wlanAPMacAddress:remotePortNumber:lldpNeighborIndex,current,,LLDP Neighbor Entry
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.1,WLSX-RS-MIB::lldpNeighborIndex,Unsigned32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.2,WLSX-RS-MIB::lldpNeighborChassisIdSubtype,INTEGER,read-only,,current,chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.3,WLSX-RS-MIB::lldpNeighborChassisId,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.4,WLSX-RS-MIB::lldpNeighborPortIdSubtype,INTEGER,read-only,,current,interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.5,WLSX-RS-MIB::lldpNeighborPortId,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.6,WLSX-RS-MIB::lldpNeighborPortDesc,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.7,WLSX-RS-MIB::lldpNeighborSysName,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.8,WLSX-RS-MIB::lldpNeighborSysDesc,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.9,WLSX-RS-MIB::lldpNeighborSysCapSupported,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.3.1.10,WLSX-RS-MIB::lldpNeighborSysCapEnabled,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.4,WLSX-RS-MIB::wlsxLldpNeighborManAddrTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.16.1.1.4.1,WLSX-RS-MIB::wlsxLldpNeighborManAddrEntry,,not-accessible,wlanAPMacAddress:remotePortNumber:lldpNeighborIndex:lldpNeighborManAddrIndex,current,,LLDP Neighbor Entry
.1.3.6.1.4.1.14823.2.2.1.16.1.1.4.1.1,WLSX-RS-MIB::lldpNeighborManAddrIndex,Unsigned32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.4.1.2,WLSX-RS-MIB::lldpNeighborManAddrSubtype,INTEGER,read-only,,current,other(0):ipV4(1):ipV6(2):nsap(3):hdlc(4):bbn1822(5):all802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164withNsap(15):dns(16):distinguishedName(17):asNumber(18):xtpOverIpv4(19):xtpOverIpv6(20):xtpNativeModeXTP(21):fibreChannelWWPN(22):fibreChannelWWNN(23):gwid(24):afi(25):mplsTpSectionEndpointIdentifier(26):mplsTpLspEndpointIdentifier(27):mplsTpPseudowireEndpointIdentifier(28):eigrpCommonServiceFamily(16384):eigrpIpv4ServiceFamily(16385):eigrpIpv6ServiceFamily(16386):lispCanonicalAddressFormat(16387):bgpLs(16388):fortyeightBitMac(16389):sixtyfourBitMac(16390):oui(16391):mac24(16392):mac40(16393):ipv664(16394):rBridgePortID(16395):trillNickname(16396):reserved(65535), 
.1.3.6.1.4.1.14823.2.2.1.16.1.1.4.1.3,WLSX-RS-MIB::lldpNeighborManAddr,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2,WLSX-RS-MIB::wlsxRemoteUSBGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.16.2.1,WLSX-RS-MIB::wlsxRemoteAccessPointUSBGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1,WLSX-RS-MIB::wlsxRemoteUSBTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1,WLSX-RS-MIB::wlsxUSBEntry,,not-accessible,wlanAPMacAddress:usbDevNumber,current,,Wired Port Entry
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.1,WLSX-RS-MIB::usbDevNumber,Unsigned32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.2,WLSX-RS-MIB::usbStatus,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.3,WLSX-RS-MIB::usbManufacturer,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.4,WLSX-RS-MIB::usbProduct,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.5,WLSX-RS-MIB::usbSerialNumber,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.6,WLSX-RS-MIB::usbVendor,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.7,WLSX-RS-MIB::usbProductID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.8,WLSX-RS-MIB::usbDriver,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.9,WLSX-RS-MIB::usbRSSI,OCTET,read-only,,current,, RSSI 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.10,WLSX-RS-MIB::usbNetworkServiceLevel,OCTET,read-only,,current,, Network Service Level 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.11,WLSX-RS-MIB::usbFirmwareVersion,OCTET,read-only,,current,, Firmware Version 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.12,WLSX-RS-MIB::usbEsnNumber,OCTET,read-only,,current,, ESN Number 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.13,WLSX-RS-MIB::usbifOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3), Operational Status of the USB Interface 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.14,WLSX-RS-MIB::usbifInUcastPkts,Counter64,read-only,,current,, Received Unicast Packets  
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.15,WLSX-RS-MIB::usbifInUcastOctets,Counter64,read-only,,current,, Received Bytes  
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.16,WLSX-RS-MIB::usbifOutUcastPkts,Counter64,read-only,,current,, Transmitted Unicast Packets  
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.17,WLSX-RS-MIB::usbifOutUcastOctets,Counter64,read-only,,current,, Transmitted Bytes  
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.18,WLSX-RS-MIB::usbifInErrors,Counter64,read-only,,current,, Errors in Incoming Interface 
.1.3.6.1.4.1.14823.2.2.1.16.2.1.1.1.19,WLSX-RS-MIB::usbifOutErrors,Counter64,read-only,,current,, Errors in Outgoing Interface 
.1.3.6.1.4.1.14823.2.2.1.17,WLSX-TUNNELEDNODE-MIB::wlsxTunneledNodeMIB,,,,,,This MIB module defines MIB objects which provide information about the Controller Transport Service (Cts) in the 
.1.3.6.1.4.1.14823.2.2.1.17.1,WLSX-TUNNELEDNODE-MIB::wlsxTunneledNodeOpGroup,,,,,,
.1.3.6.1.4.1.14823.2.2.1.17.1.1,WLSX-TUNNELEDNODE-MIB::wlsxTunneledNodeRequestTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.2.1.17.1.1.1,WLSX-TUNNELEDNODE-MIB::wlsxTunneledNodeRequestEntry,,not-accessible,wlsxTunneledNodeMAC,current,,
.1.3.6.1.4.1.14823.2.2.1.17.1.1.1.1,WLSX-TUNNELEDNODE-MIB::wlsxTunneledNodeMAC,OCTET,not-accessible,,current,,  MAC address of the Tunneled Node 
.1.3.6.1.4.1.14823.2.2.1.17.1.1.1.2,WLSX-TUNNELEDNODE-MIB::wlsxTunneledNodeIp,IpAddress,read-only,,current,, IP address of the Tunneled Node
.1.3.6.1.4.1.14823.2.2.1.17.1.1.1.3,WLSX-TUNNELEDNODE-MIB::wlsxNumTunnels,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.2.1.17.1.1.1.4,WLSX-TUNNELEDNODE-MIB::wlsxTunneledNodeType,INTEGER,read-only,,current,others(1):corvina(2), Device type of the tunnel 
.1.3.6.1.4.1.14823.2.2.1.18,WLSX-POE-MIB::wlsxPoEMIB,,,,,,This MIB module defines MIB objects which provide information about the Power Sourcing Equipment(PSE) and Powered Device(PD). The following abbreviations are defined in [IEEE-802.3af] and will be used with the same significance in this document: PSE - Power Sourcing Equipment; PD - Powered Device;
.1.3.6.1.4.1.14823.2.2.1.18.0,WLSX-POE-MIB::wlsxPoEMIBNotifications,,,,,,
.1.3.6.1.4.1.14823.2.2.1.18.0.1,WLSX-POE-MIB::wlsxTrapInterfacePoEState,,,,,,When there is a PoE state transition i.e on or off then this trap is sent to the management entity
.1.3.6.1.4.1.14823.2.2.1.18.1,WLSX-POE-MIB::wlsxPoEMIBObjects,,,,,,
.1.3.6.1.4.1.14823.2.2.1.18.1.1,WLSX-POE-MIB::wlsxPsePortTable,,not-accessible,,current,,A table of objects that display the parameters configured for a power ethernet port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1,WLSX-POE-MIB::wlsxPsePortEntry,,not-accessible,wlsxPsePortIndex,current,,A set of objects that display the configuration of a power  ethernet port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.1,WLSX-POE-MIB::wlsxPsePortIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the power ethernet port for which this entry  is populated.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.2,WLSX-POE-MIB::wlsxPsePortAdminStatus,INTEGER,read-only,,current,enable(1):disable(2),Admin status of a power ethernet port. A value of enable(1) means that the port has PSE functions enabled on it. A value of disable(2) means that the port does not support or has disabled PSE  functions.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.3,WLSX-POE-MIB::wlsxPsePortState,INTEGER,read-only,,current,on(1):off(2),This object indicates the status of the port. The reason for these states is indicated by wlsxPsePortStatus. on(1) - indicates that PSE is sourcing power. off(2) - indicates that PSE is not sourcing power.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4,WLSX-POE-MIB::wlsxPsePortStatus,INTEGER,read-only,,current,unknown(1):offAdmin(2):offPowerManagement(3):offIllegalClass(4):offDetectionProgress(5):offHardwareError(6):offNonStandardPd(7),This object indicates the status of the port. unknown(1) - indicates either a state of off with the reason being not known or the state is on. offAdmin(2) - indicates the port is administratively disabled. offPowerManagement(3) - indicates the port is off due to power management. offIllegalClass(4) - indicates the port is off because the PD is of illegal class. offDetectionProgress(5)- indicates the port is off because the PD detection is in progress. offHardwareError(6) - indicates the port is off because of hardware error. offNonStandardPd(7) - indicates the port is off because the PD is a non standard one.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5,WLSX-POE-MIB::wlsxPsePortDiscoveryMode,INTEGER,read-only,,current,unknown(0):off(1):ieee(2):cisco(3),This object indicates the method of discovery used by the system for the detection of the Powered Device(PD).  A value of unknown(0) means that the discovery method is unknown on this port. A value of off(1) means that the discovery method is turned off on this port. A value of ieee(2) indicates that the discovery method is IEEE based on this port. A value of cisco(3) indicates that the discovery method is Cisco based on this port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.6,WLSX-POE-MIB::wlsxPsePortIsPdDetected,INTEGER,read-only,,current,true(1):false(2),This object indicates if a Powered Device(PD) is detected on this port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.7,WLSX-POE-MIB::wlsxPsePortIsIeeePd,INTEGER,read-only,,current,true(1):false(2),This object indicates the IEEE compliance of a Powered Device(PD). A value of true(1) means the Powered Device(PD) is IEEE compliant. A value of false(2) means the Powered Device is not IEEE compliant.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.8,WLSX-POE-MIB::wlsxPsePortPdClass,INTEGER,read-only,,current,unknownClass(0):class0(1):class1(2):class2(3):class3(4):class4(5),This object indicates the Power classification of the  Powered Device(PD) connected on the port. A value of 'class0(1)' indicates that the power  classification of the powered device falls into class 0 in IEEE specifications. A value of 'class1(2)' indicates that the power classification of the powered devices falls into class 1 in IEEE specifications. A value of 'class2(3)' indicates that the power classification of the powered devices falls into class 2 in IEEE specifications. A value of 'class3(4)' indicates that the power classification of the powered devices falls into class 3 in IEEE specifications. A value of 'class4(5)' indicates that the power classification of the powered devices falls into class 4 in IEEE specifications.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.9,WLSX-POE-MIB::wlsxPsePortPriority,INTEGER,read-only,,current,low(1):high(2):critical(3),This object indicates the configured priority for this port. low(1) - indicates the priority of the port is low. high(2) - indicates the priority of the port is high. critical(3) - indicates the priority of the port is critical.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.10,WLSX-POE-MIB::wlsxPsePortDefaultPowerMax,Integer32,read-only,,current,,This object indicates the default maximum power available on this port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.11,WLSX-POE-MIB::wlsxPsePortPowerAllocated,Integer32,read-only,,current,,This object indicates the configured power allocation on this port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.12,WLSX-POE-MIB::wlsxPsePortPowerConsumed,Integer32,read-only,,current,,This object gives the power consumption by the PD on this port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.13,WLSX-POE-MIB::wlsxPsePortVoltage,Integer32,read-only,,current,,This object indicates the voltage on this port.
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.14,WLSX-POE-MIB::wlsxPsePortCurrent,Integer32,read-only,,current,,This object indicates the current on this port.
.1.3.6.1.4.1.14823.2.2.1.18.1.2,WLSX-POE-MIB::wlsxPseSlotTable,,not-accessible,,current,,A table of objects that display all the details about the  Power Sourcing Equipment(PSE).
.1.3.6.1.4.1.14823.2.2.1.18.1.2.1,WLSX-POE-MIB::wlsxPseSlotEntry,,not-accessible,wlsxPseSlotIndex,current,,A set of objects that displays all the information about the PSE on this device on a per slot basis.
.1.3.6.1.4.1.14823.2.2.1.18.1.2.1.1,WLSX-POE-MIB::wlsxPseSlotIndex,Integer32,not-accessible,,current,,This object uniquely identifies a PSE entry.
.1.3.6.1.4.1.14823.2.2.1.18.1.2.1.2,WLSX-POE-MIB::wlsxPseSlotPowerAvailable,Integer32,read-only,,current,,This object indicates the total amount of power  available from this PSE.
.1.3.6.1.4.1.14823.2.2.1.18.1.2.1.3,WLSX-POE-MIB::wlsxPseSlotPowerConsumption,Integer32,read-only,,current,,This object indicates the total amount of power consumed from this PSE.
.1.3.6.1.4.1.14823.2.2.1.18.1.2.1.4,WLSX-POE-MIB::wlsxPseSlotGuardBand,Integer32,read-only,,current,,This object indicates the power left unused to be provided in case of spikes in the amount of power used.
.1.3.6.1.4.1.14823.2.2.1.18.1.2.1.5,WLSX-POE-MIB::wlsxPseSlotPoEManagementMode,INTEGER,read-only,,current,dynamic(1):static(2):class(3),This object indicates the PSE management mode. A value of dynamic(1) indicates that it is  dynamic power management. A value of static(2) indicates that it is  static power management. A value of class(3) indicates that it is a  Class based power management.
.1.3.6.1.4.1.14823.2.2.1.18.2,WLSX-POE-MIB::wlsxPoEMIBConformance,,,,,,
.1.3.6.1.4.1.14823.2.2.1.18.2.1,WLSX-POE-MIB::wlsxPoEMIBCompliances,,,,,,
.1.3.6.1.4.1.14823.2.2.1.18.2.1.1,WLSX-POE-MIB::wlsxPoEMIBCompliance,,,,,,This is the statement of compliance.
.1.3.6.1.4.1.14823.2.2.1.18.2.2,WLSX-POE-MIB::wlsxPoEMIBGroups,,,,,,
.1.3.6.1.4.1.14823.2.2.1.18.2.2.1,WLSX-POE-MIB::wlsxPoEMIBPortGroup,,,,,,This group provides the details of all the  Power ethernet ports on the device.
.1.3.6.1.4.1.14823.2.2.1.18.2.2.2,WLSX-POE-MIB::wlsxPoEMIBMainPseGroup,,,,,,This group provides the details of the PSE entry.
.1.3.6.1.4.1.14823.2.2.1.18.2.2.3,WLSX-POE-MIB::wlsxPoEMIBNotificationsGroup,,,,,,This group gives the collection of Notifications related to power consumption on an port.
.1.3.6.1.4.1.14823.2.2.1.19,WLSX-STACK-MIB::wlsxStackMIB,,,,,,This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base  (MIB): Stacking. Stacking feature allows for a set of devices connected through stacking ports to behave as a single chassis. Other network elements view it as a single node. The advantage with this feature is the simplified management and in L2 domain, multiple redundant links connected to stack do not form a loop. Copyright (C) 2002-2011 by Aruba Networks, Inc. All Rights Reserved.
.1.3.6.1.4.1.14823.2.2.1.19.1,WLSX-STACK-MIB::wlsxStackMIBObjects,,,,,,Branch For Stacking Subsystem Managed Objects.
.1.3.6.1.4.1.14823.2.2.1.19.1.1,WLSX-STACK-MIB::wlsxStackMember,,,,,,
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1,WLSX-STACK-MIB::wlsxStackMemberTable,,not-accessible,,current,,Stacking Member Table.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1,WLSX-STACK-MIB::wlsxStackMemberEntry,,not-accessible,wlsxStackMemberId,current,,Am Entry in Stacking Member Table.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.1,WLSX-STACK-MIB::wlsxStackMemberId,Integer32,read-only,,current,,This object specifies the slot number of this element in stack.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.2,WLSX-STACK-MIB::wlsxStackMemberState,,read-only,,current,,This object specifies state of this element in stack.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.3,WLSX-STACK-MIB::wlsxStackMemberMacAddr,OCTET,read-only,,current,,This object specifies mac-address of this stack element.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.4,WLSX-STACK-MIB::wlsxStackMemberPriority,Integer32,read-only,,current,,This object specifies configured priority of this stack element.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.5,WLSX-STACK-MIB::wlsxStackMemberHostName,OCTET,read-only,,current,,This object specifies local host name of this stack element.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.6,WLSX-STACK-MIB::wlsxStackMemberSysLocation,OCTET,read-only,,current,,This object specifies local sys location of this stack element.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.7,WLSX-STACK-MIB::wlsxStackMemberChangeDetectSeqNum,Integer32,read-only,,current,,This object specifies sequence number for any change that has been detected by the Aruba Stacking Protocol.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.8,WLSX-STACK-MIB::wlsxStackMemberSysUpTime,Integer32,read-only,,current,,This object specifies system up time of this stacking member since boot.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.9,WLSX-STACK-MIB::wlsxStackMemberModelName,OCTET,read-only,,current,,This object specifies Model Name of this element in the stack.
.1.3.6.1.4.1.14823.2.2.1.19.1.1.1.1.10,WLSX-STACK-MIB::wlsxStackMemberSWVersion,OCTET,read-only,,current,,This object specifies software version running on this element in the stack.
.1.3.6.1.4.1.14823.2.2.1.19.1.2,WLSX-STACK-MIB::wlsxStackProtoIf,,,,,,
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1,WLSX-STACK-MIB::wlsxStackProtoIfTable,,not-accessible,,current,,Stacking Interface Table.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1,WLSX-STACK-MIB::wlsxStackProtoIfEntry,,not-accessible,wlsxStackMemberId:wlsxStackProtoIfName,current,,An Entry in Stack Manager Interface Table.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.1,WLSX-STACK-MIB::wlsxStackProtoIfName,OCTET,not-accessible,,current,,This object specifies the interface name which is part of stacking link connected to other stacking element.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.2,WLSX-STACK-MIB::wlsxStackProtoIfNeighborState,INTEGER,read-only,,current,up(1):down(2),This object specifies adjacency state of this interface.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.3,WLSX-STACK-MIB::wlsxStackProtoIfStatTxPkt,Counter64,read-only,,current,,This object specifies count of stacking protocol packets transmitted  from this interface.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.4,WLSX-STACK-MIB::wlsxStackProtoIfStatRxPkt,Counter64,read-only,,current,,This object specifies count of stacking protocol packets received by this interface.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.5,WLSX-STACK-MIB::wlsxStackProtoIfStatTxErr,Counter64,read-only,,current,,This object specifies count of stacking protocol error packets transmitted from this interface.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.6,WLSX-STACK-MIB::wlsxStackProtoIfStatNeighborTransDown,Counter64,read-only,,current,,This object specifies count of transitions that a neighbor's state changed from up to down.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.7,WLSX-STACK-MIB::wlsxStackProtoIfStatNeighborTransUp,Counter64,read-only,,current,,This object specifies count of transitions that a neighbor's state changed from down to up.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.8,WLSX-STACK-MIB::wlsxStackProtoIfStatKeepAliveTx,Counter64,read-only,,current,,This object specifies count of transmitted keep-alive packets to its neighbor.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.9,WLSX-STACK-MIB::wlsxStackProtoIfStatKeepAliveRx,Counter64,read-only,,current,,This object specifies count of received keep-alive packets by this interface.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.10,WLSX-STACK-MIB::wlsxStackProtoIfStatRouteUpdateTx,Counter64,read-only,,current,,This object specifies count of transmitted route update notifications to its neighbor.
.1.3.6.1.4.1.14823.2.2.1.19.1.2.1.1.11,WLSX-STACK-MIB::wlsxStackProtoIfStatRouteUpdateRx,Counter64,read-only,,current,,This object specifies count of received route update notifications by this interface.
.1.3.6.1.4.1.14823.2.2.1.19.1.3,WLSX-STACK-MIB::wlsxStackTopo,,,,,,
.1.3.6.1.4.1.14823.2.2.1.19.1.3.1,WLSX-STACK-MIB::wlsxStackTopoTable,,not-accessible,,current,,Stacking Topology Table.
.1.3.6.1.4.1.14823.2.2.1.19.1.3.1.1,WLSX-STACK-MIB::wlsxStackTopoEntry,,not-accessible,wlsxStackMemberId:wlsxStackProtoIfName,current,,An Entry in Stacking Topology Table.
.1.3.6.1.4.1.14823.2.2.1.19.1.3.1.1.1,WLSX-STACK-MIB::wlsxStackTopoNeighborSlot,Integer32,read-only,,current,,This object specifies the Slot number of the neighbor stack element to which this one is connected.
.1.3.6.1.4.1.14823.2.2.1.19.1.3.1.1.2,WLSX-STACK-MIB::wlsxStackTopoNeighborIfName,OCTET,read-only,,current,,This object specifies the interface name of the neighbor slot to which this element is connected.
.1.3.6.1.4.1.14823.2.2.1.19.1.3.1.1.3,WLSX-STACK-MIB::wlsxStackNeighborState,INTEGER,read-only,,current,unknown(1):initializing(2):up(3):failed(4):down(5),This object specifies the state of the neighbor slot. unknown(1) - The state of the neighbor slot can not be retrieved. initializing(2) - The neighbor is in initializing state. up(3) - The neighbor element is up and running. failed(4) - The neighbor element has failed to operate. down(5) - The neighbor element is in down state.
.1.3.6.1.4.1.14823.2.2.1.19.2,WLSX-STACK-MIB::wlsxStackMIBConformance,,,,,,Branch For Stacking Subsystem Conformance Information.
.1.3.6.1.4.1.14823.2.2.1.19.2.1,WLSX-STACK-MIB::wlsxStackMIBGroups,,,,,,Branch For Stacking Subsystem Units of Conformance.
.1.3.6.1.4.1.14823.2.2.1.19.2.1.1,WLSX-STACK-MIB::wlsxStackChasGroup,,,,,,Collection of objects for Stacking Member Entry.
.1.3.6.1.4.1.14823.2.2.1.19.2.1.2,WLSX-STACK-MIB::wlsxStackTopologyGroup,,,,,,Collection of objects for Stacking Topology formation.
.1.3.6.1.4.1.14823.2.2.1.19.2.1.3,WLSX-STACK-MIB::wlsxStackProtoIfGroup,,,,,,Collection of objects for Interface list information.
.1.3.6.1.4.1.14823.2.2.1.19.2.2,WLSX-STACK-MIB::wlsxStackMIBCompliances,,,,,,Branch For Stacking Subsystem Compliance Statements.
.1.3.6.1.4.1.14823.2.2.1.19.2.2.1,WLSX-STACK-MIB::wlsxStackMIBCompliance,,,,,,Compliance statement for Stacking.
.1.3.6.1.4.1.14823.2.3,ARUBA-MIB::arubaAp,,,,,,
.1.3.6.1.4.1.14823.2.3.1,ARUBA-MIB::wlsrEnterpriseMibModules,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1,WLSR-AP-MIB::wlsrMIB,,,,,,This MIB is for managing the
.1.3.6.1.4.1.14823.2.3.1.1.1,WLSR-AP-MIB::wlsrConfigGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.1.1,WLSR-AP-MIB::wlsrConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1,WLSR-AP-MIB::wlsrConfigEntry,,not-accessible,wlsrBSSID,current,,
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.1,WLSR-AP-MIB::wlsrBSSID,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.2,WLSR-AP-MIB::wlsrESSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3,WLSR-AP-MIB::wlsrMode,INTEGER,read-only,,current,master(1):adhoc(2):monitor(3), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.4,WLSR-AP-MIB::wlsrCurrentChannel,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.5,WLSR-AP-MIB::wlsrTxPower,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.6,WLSR-AP-MIB::wlsrRTSThreshold,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.7,WLSR-AP-MIB::wlsrRetryLimit,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.8,WLSR-AP-MIB::wlsrPreamble,INTEGER,read-only,,current,short(1):long(2), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.9,WLSR-AP-MIB::wlsrBeaconInterval,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.10,WLSR-AP-MIB::wlsrPowerMgmt,INTEGER,read-only,,current,enable(1):disable(2), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.11,WLSR-AP-MIB::wlsrLoadBalance,INTEGER,read-only,,current,enable(1):disable(2), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12,WLSR-AP-MIB::wlsrSupportedRates,BITS,read-only,,current,unused0(0):unused1(1):unused2(2):unused3(3):rate54Mbps(4):rate48Mbps(5):rate36Mbps(6):rate24Mbps(7):rate18Mbps(8):rate12Mbps(9):rate9Mbps(10):rate6Mbps(11):rate11Mbps(12):rate5Mbps(13):rate2Mbps(14):rate1Mbps(15), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13,WLSR-AP-MIB::wlsrDTIMPeriod,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14,WLSR-AP-MIB::wlsrLMSAddress,IpAddress,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15,WLSR-AP-MIB::wlsrEncryption,BITS,read-only,,current,unused0(0):unused1(1):unused2(2):unused3(3):unused4(4):unused5(5):unused6(6):xSec(7):wpa2PreAuth(8):aes8021x(9):aesPSK(10):dynamicTkip(11):staticTkip(12):dynamicWep(13):staticWep(14):disabled(15), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17,WLSR-AP-MIB::wlsrStatus,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18,WLSR-AP-MIB::wlsrAgeout,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.19,WLSR-AP-MIB::wlsrMTU,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.20,WLSR-AP-MIB::wlsrLocation,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.21,WLSR-AP-MIB::wlsrHideSSID,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.22,WLSR-AP-MIB::wlsrDenyBroadcast,INTEGER,read-only,,current,true(1):false(2), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.23,WLSR-AP-MIB::wlsrBGmode,INTEGER,read-only,,current,bgMixed(1):bOnly(2):gOnly(3), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.24,WLSR-AP-MIB::wlsrCardType,INTEGER,read-only,,current,noCard(1):intersil(2):atherosA(3):atherosBG(4):atherosABG(5):ar5212A(10):ar5212BG(11):ar5212ABG(12), 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25,WLSR-AP-MIB::wlsrRegDomain,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.26,WLSR-AP-MIB::wlsrCountryCode,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.27,WLSR-AP-MIB::wlsrTxRates,BITS,read-only,,current,unused0(0):unused1(1):unused2(2):unused3(3):rate54Mbps(4):rate48Mbps(5):rate36Mbps(6):rate24Mbps(7):rate18Mbps(8):rate12Mbps(9):rate9Mbps(10):rate6Mbps(11):rate11Mbps(12):rate5Mbps(13):rate2Mbps(14):rate1Mbps(15), 
.1.3.6.1.4.1.14823.2.3.1.1.3,WLSR-AP-MIB::wlsrStatsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3,WLSR-AP-MIB::wlsrStatsChannelGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1,WLSR-AP-MIB::wlsrChannelStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1,WLSR-AP-MIB::wlsrChannelStatsEntry,,not-accessible,wlsrChStatsChannel,current,,Channel Statistics Table
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.1,WLSR-AP-MIB::wlsrChStatsChannel,INTEGER,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.2,WLSR-AP-MIB::wlsrChStatsNumAPs,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.3,WLSR-AP-MIB::wlsrChStatsNumStations,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.4,WLSR-AP-MIB::wlsrChStatsTotPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.5,WLSR-AP-MIB::wlsrChStatsTotBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.6,WLSR-AP-MIB::wlsrChStatsTotRetryPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.7,WLSR-AP-MIB::wlsrChStatsTotFragmentedPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.8,WLSR-AP-MIB::wlsrChStatsTotPhyErrPkts,Counter32,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.9,WLSR-AP-MIB::wlsrChStatsTotMacErrPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.10,WLSR-AP-MIB::wlsrChStatsFrameErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.11,WLSR-AP-MIB::wlsrChStatsFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.12,WLSR-AP-MIB::wlsrChStatsFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.13,WLSR-AP-MIB::wlsrChStatsFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.14,WLSR-AP-MIB::wlsrChStatsFrameBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.15,WLSR-AP-MIB::wlsrChStatsFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.16,WLSR-AP-MIB::wlsrChStatsMonitoredTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2,WLSR-AP-MIB::wlsrChannelRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1,WLSR-AP-MIB::wlsrChannelRateStatsEntry,,not-accessible,wlsrChStatsChannel,current,,Channel Rate Statistics.
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.1,WLSR-AP-MIB::wlsrChStatsTotPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.2,WLSR-AP-MIB::wlsrChStatsTotBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.3,WLSR-AP-MIB::wlsrChStatsTotPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.4,WLSR-AP-MIB::wlsrChStatsTotBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.5,WLSR-AP-MIB::wlsrChStatsTotPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.6,WLSR-AP-MIB::wlsrChStatsTotBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.7,WLSR-AP-MIB::wlsrChStatsTotPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.8,WLSR-AP-MIB::wlsrChStatsTotBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.9,WLSR-AP-MIB::wlsrChStatsTotPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.10,WLSR-AP-MIB::wlsrChStatsTotBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.11,WLSR-AP-MIB::wlsrChStatsTotPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.12,WLSR-AP-MIB::wlsrChStatsTotBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.13,WLSR-AP-MIB::wlsrChStatsTotPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.14,WLSR-AP-MIB::wlsrChStatsTotBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.15,WLSR-AP-MIB::wlsrChStatsTotPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.16,WLSR-AP-MIB::wlsrChStatsTotBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.17,WLSR-AP-MIB::wlsrChStatsTotPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.18,WLSR-AP-MIB::wlsrChStatsTotBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.19,WLSR-AP-MIB::wlsrChStatsTotPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.20,WLSR-AP-MIB::wlsrChStatsTotBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.21,WLSR-AP-MIB::wlsrChStatsTotPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.22,WLSR-AP-MIB::wlsrChStatsTotBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3,WLSR-AP-MIB::wlsrChannelDATypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1,WLSR-AP-MIB::wlsrChannelDATypeStatsEntry,,not-accessible,wlsrChStatsChannel,current,,Channel Statistics based on the Address Type.
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.1,WLSR-AP-MIB::wlsrChStatsTotDABroadcastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.2,WLSR-AP-MIB::wlsrChStatsTotDABroadcastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.3,WLSR-AP-MIB::wlsrChStatsTotDAMulticastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.4,WLSR-AP-MIB::wlsrChStatsTotDAMulticastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.5,WLSR-AP-MIB::wlsrChStatsTotDAUnicastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.6,WLSR-AP-MIB::wlsrChStatsTotDAUnicastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4,WLSR-AP-MIB::wlsrChannelFrameTypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1,WLSR-AP-MIB::wlsrChannelFrameTypeStatsEntry,,not-accessible,wlsrChStatsChannel,current,,Channel Statistics based on Frame Type.
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.1,WLSR-AP-MIB::wlsrChStatsTotMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.2,WLSR-AP-MIB::wlsrChStatsTotMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.3,WLSR-AP-MIB::wlsrChStatsTotCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.4,WLSR-AP-MIB::wlsrChStatsTotCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.5,WLSR-AP-MIB::wlsrChStatsTotDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.6,WLSR-AP-MIB::wlsrChStatsTotDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5,WLSR-AP-MIB::wlsrChannelPktSizeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1,WLSR-AP-MIB::wlsrChannelPktSizeStatsEntry,,not-accessible,wlsrChStatsChannel,current,,Channel Statistics based on the packet sizes.
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.1,WLSR-AP-MIB::wlsrChStatsPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.2,WLSR-AP-MIB::wlsrChStatsPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.3,WLSR-AP-MIB::wlsrChStatsPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.4,WLSR-AP-MIB::wlsrChStatsPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.5,WLSR-AP-MIB::wlsrChStatsPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.6,WLSR-AP-MIB::wlsrChStatsPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4,WLSR-AP-MIB::wlsrStatsStaGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1,WLSR-AP-MIB::wlsrStaStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1,WLSR-AP-MIB::wlsrStaStatsEntry,,not-accessible,wlsrStaAddress,current,,Station Statistics.
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.1,WLSR-AP-MIB::wlsrStaAddress,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.2,WLSR-AP-MIB::wlsrStaTxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.3,WLSR-AP-MIB::wlsrStaTxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4,WLSR-AP-MIB::wlsrStaRxPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5,WLSR-AP-MIB::wlsrStaRxBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6,WLSR-AP-MIB::wlsrStaTxRetryPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.7,WLSR-AP-MIB::wlsrStaRxRetryPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.8,WLSR-AP-MIB::wlsrStaTxFragmentedPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.9,WLSR-AP-MIB::wlsrStaRxFragmentedPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.10,WLSR-AP-MIB::wlsrStaReceiveErrPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.11,WLSR-AP-MIB::wlsrStaTxTotSignal,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.12,WLSR-AP-MIB::wlsrStaTxSignalPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.13,WLSR-AP-MIB::wlsrStaTxCurSignal,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.14,WLSR-AP-MIB::wlsrStaTxHighSignal,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.15,WLSR-AP-MIB::wlsrStaRxTotNoise,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.16,WLSR-AP-MIB::wlsrStaRxNoisePkts,Counter32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.17,WLSR-AP-MIB::wlsrStaRxCurrentNoise,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.18,WLSR-AP-MIB::wlsrStaRxHighNoise,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.19,WLSR-AP-MIB::wlsrStaRxLowNoise,Integer32,read-only,,deprecated,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.20,WLSR-AP-MIB::wlsrStaFrameRetryRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.21,WLSR-AP-MIB::wlsrStaFrameLowSpeedRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.22,WLSR-AP-MIB::wlsrStaFrameNonUnicastRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.23,WLSR-AP-MIB::wlsrStaFrameRetryErrorRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.24,WLSR-AP-MIB::wlsrStaFrameBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.25,WLSR-AP-MIB::wlsrStaFrameFragmentationRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.26,WLSR-AP-MIB::wlsrStaFrameHighBandwidthRate,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2,WLSR-AP-MIB::wlsrStaRateStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1,WLSR-AP-MIB::wlsrStaRateStatsEntry,,not-accessible,wlsrStaAddress,current,, Station Rate Stats Table
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.1,WLSR-AP-MIB::wlsrStaTxPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.2,WLSR-AP-MIB::wlsrStaTxBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.3,WLSR-AP-MIB::wlsrStaTxPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.4,WLSR-AP-MIB::wlsrStaTxBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.5,WLSR-AP-MIB::wlsrStaTxPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.6,WLSR-AP-MIB::wlsrStaTxBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.7,WLSR-AP-MIB::wlsrStaTxPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.8,WLSR-AP-MIB::wlsrStaTxBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.9,WLSR-AP-MIB::wlsrStaTxPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.10,WLSR-AP-MIB::wlsrStaTxBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.11,WLSR-AP-MIB::wlsrStaTxPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.12,WLSR-AP-MIB::wlsrStaTxBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.13,WLSR-AP-MIB::wlsrStaTxPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.14,WLSR-AP-MIB::wlsrStaTxBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.15,WLSR-AP-MIB::wlsrStaTxPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.16,WLSR-AP-MIB::wlsrStaTxBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.17,WLSR-AP-MIB::wlsrStaTxPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.18,WLSR-AP-MIB::wlsrStaTxBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.19,WLSR-AP-MIB::wlsrStaTxPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.20,WLSR-AP-MIB::wlsrStaTxBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.21,WLSR-AP-MIB::wlsrStaTxPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.22,WLSR-AP-MIB::wlsrStaTxBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.23,WLSR-AP-MIB::wlsrStaRxPktsAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.24,WLSR-AP-MIB::wlsrStaRxBytesAt1Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.25,WLSR-AP-MIB::wlsrStaRxPktsAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.26,WLSR-AP-MIB::wlsrStaRxBytesAt2Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.27,WLSR-AP-MIB::wlsrStaRxPktsAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.28,WLSR-AP-MIB::wlsrStaRxBytesAt5Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.29,WLSR-AP-MIB::wlsrStaRxPktsAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.30,WLSR-AP-MIB::wlsrStaRxBytesAt11Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.31,WLSR-AP-MIB::wlsrStaRxPktsAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.32,WLSR-AP-MIB::wlsrStaRxBytesAt6Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.33,WLSR-AP-MIB::wlsrStaRxPktsAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.34,WLSR-AP-MIB::wlsrStaRxBytesAt12Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.35,WLSR-AP-MIB::wlsrStaRxPktsAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.36,WLSR-AP-MIB::wlsrStaRxBytesAt18Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.37,WLSR-AP-MIB::wlsrStaRxPktsAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.38,WLSR-AP-MIB::wlsrStaRxBytesAt24Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.39,WLSR-AP-MIB::wlsrStaRxPktsAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.40,WLSR-AP-MIB::wlsrStaRxBytesAt36Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.41,WLSR-AP-MIB::wlsrStaRxPktsAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.42,WLSR-AP-MIB::wlsrStaRxBytesAt48Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.43,WLSR-AP-MIB::wlsrStaRxPktsAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.44,WLSR-AP-MIB::wlsrStaRxBytesAt54Mbps,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3,WLSR-AP-MIB::wlsrStaDATypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1,WLSR-AP-MIB::wlsrStaDATypeStatsEntry,,not-accessible,wlsrStaAddress,current,,Station Statistics based on the Destination Address Type.
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.1,WLSR-AP-MIB::wlsrStaTxDABroadcastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.2,WLSR-AP-MIB::wlsrStaTxDABroadcastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.3,WLSR-AP-MIB::wlsrStaTxDAMulticastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.4,WLSR-AP-MIB::wlsrStaTxDAMulticastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.5,WLSR-AP-MIB::wlsrStaTxDAUnicastPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.6,WLSR-AP-MIB::wlsrStaTxDAUnicastBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4,WLSR-AP-MIB::wlsrStaFrameTypeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1,WLSR-AP-MIB::wlsrStaFrameTypeStatsEntry,,not-accessible,wlsrStaAddress,current,,Station Frame Type Stats Entry.
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.1,WLSR-AP-MIB::wlsrStaTxMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.2,WLSR-AP-MIB::wlsrStaTxMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.3,WLSR-AP-MIB::wlsrStaTxCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.4,WLSR-AP-MIB::wlsrStaTxCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.5,WLSR-AP-MIB::wlsrStaTxDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.6,WLSR-AP-MIB::wlsrStaTxDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.7,WLSR-AP-MIB::wlsrStaRxMgmtPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.8,WLSR-AP-MIB::wlsrStaRxMgmtBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.9,WLSR-AP-MIB::wlsrStaRxCtrlPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.10,WLSR-AP-MIB::wlsrStaRxCtrlBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.11,WLSR-AP-MIB::wlsrStaRxDataPkts,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.12,WLSR-AP-MIB::wlsrStaRxDataBytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5,WLSR-AP-MIB::wlsrStaPktSizeStatsTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1,WLSR-AP-MIB::wlsrStaPktSizeStatsEntry,,not-accessible,wlsrStaAddress,current,,Station Packet Size Stats.
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.1,WLSR-AP-MIB::wlsrStaTxPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.2,WLSR-AP-MIB::wlsrStaTxPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.3,WLSR-AP-MIB::wlsrStaTxPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.4,WLSR-AP-MIB::wlsrStaTxPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.5,WLSR-AP-MIB::wlsrStaTxPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.6,WLSR-AP-MIB::wlsrStaTxPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.7,WLSR-AP-MIB::wlsrStaRxPkts63Bytes,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.8,WLSR-AP-MIB::wlsrStaRxPkts64To127,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.9,WLSR-AP-MIB::wlsrStaRxPkts128To255,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.10,WLSR-AP-MIB::wlsrStaRxPkts256To511,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.11,WLSR-AP-MIB::wlsrStaRxPkts512To1023,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.12,WLSR-AP-MIB::wlsrStaRxPkts1024To1518,Counter32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.4,WLSR-AP-MIB::wlsrAirMonitorGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.4.1,WLSR-AP-MIB::wlsrAirMonitorApListTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1,WLSR-AP-MIB::wlsrAirMonitorApListEntry,,not-accessible,wlsrAmApBSSID,current,,Ap List Entry
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.1,WLSR-AP-MIB::wlsrAmApBSSID,OCTET,not-accessible,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.2,WLSR-AP-MIB::wlsrAmSSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.3,WLSR-AP-MIB::wlsrAmChannel,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.4,WLSR-AP-MIB::wlsrAmPhysicalType,INTEGER,read-only,,current,dot11b(1):dot11a(2):dot11g(3), 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.5,WLSR-AP-MIB::wlsrAmAccessPointType,INTEGER,read-only,,current,genericAp(1):softAp(2):ciscoAp(3), 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6,WLSR-AP-MIB::wlsrAmRAPType,INTEGER,read-only,,current,valid(1):interfering(2):unsecure(3):dos(4):unknown(5), 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.7,WLSR-AP-MIB::wlsrAmRSSI,Integer32,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.8,WLSR-AP-MIB::wlsrAmMonitoredTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.9,WLSR-AP-MIB::wlsrAmInactivityTime,TimeTicks,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.10,WLSR-AP-MIB::wlsrAmLoadBalancing,INTEGER,read-only,,current,enable(1):disable(2), 
.1.3.6.1.4.1.14823.2.3.1.1.100,WLSR-AP-MIB::wlsrTrapsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100,WLSR-AP-MIB::wlsrTrapObjectsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.1,WLSR-AP-MIB::wlsrTargetApBSSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.100.100.2,WLSR-AP-MIB::wlsrTargetApSSID,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.100.100.3,WLSR-AP-MIB::wlsrTargetApChannel,INTEGER,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.1.1.100.100.4,WLSR-AP-MIB::wlsrSourceMac,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.5,WLSR-AP-MIB::wlsrNodeMac,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.6,WLSR-AP-MIB::wlsrFrameType,INTEGER,read-only,,current,associateRequest(1):associateResponse(2):reassociateRequest(3):reassociateResponse(4):probeRequest(5):probeResponse(6):beacon(9):atim(10):disassociate(11):auth(12):deauth(13),
.1.3.6.1.4.1.14823.2.3.1.1.100.100.7,WLSR-AP-MIB::wlsrAddressType,INTEGER,read-only,,current,srcAddress(1):dstAddress(2):bssid(3),
.1.3.6.1.4.1.14823.2.3.1.1.100.100.8,WLSR-AP-MIB::wlsrSignatureName,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.9,WLSR-AP-MIB::wlsrMatchedMac,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.10,WLSR-AP-MIB::wlsrMatchedIp,IpAddress,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.11,WLSR-AP-MIB::wlsrReceiverMac,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.12,WLSR-AP-MIB::wlsrTransmitterMac,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.13,WLSR-AP-MIB::wlsrRSSI,Integer32,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.14,WLSR-AP-MIB::wlsrRogueInfoURL,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.100.15,WLSR-AP-MIB::wlsrInterferingAPInfoURL,OCTET,read-only,,current,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1001,WLSR-AP-MIB::wlsrUnsecureApDetected,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1002,WLSR-AP-MIB::wlsrStaImpersonation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1003,WLSR-AP-MIB::wlsrReservedChannelViolation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1004,WLSR-AP-MIB::wlsrValidSSIDViolation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1005,WLSR-AP-MIB::wlsrChannelMisconfiguration,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1006,WLSR-AP-MIB::wlsrOUIMisconfiguration,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1007,WLSR-AP-MIB::wlsrSSIDMisconfiguration,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1008,WLSR-AP-MIB::wlsrShortPreableMisconfiguration,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1009,WLSR-AP-MIB::wlsrWPAMisconfiguration,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1010,WLSR-AP-MIB::wlsrAdhocNetworkDetected,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1011,WLSR-AP-MIB::wlsrStaPolicyViolation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1012,WLSR-AP-MIB::wlsrRepeatWEPIVViolation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1013,WLSR-AP-MIB::wlsrWeakWEPIVViolation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1014,WLSR-AP-MIB::wlsrChannelInterferenceDetected,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1015,WLSR-AP-MIB::wlsrAPInterferenceDetected,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1016,WLSR-AP-MIB::wlsrStaInterferenceDetected,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1017,WLSR-AP-MIB::wlsrFrameRetryRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1018,WLSR-AP-MIB::wlsrFrameReceiveErrorRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1019,WLSR-AP-MIB::wlsrFrameFragmentationRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1020,WLSR-AP-MIB::wlsrFrameBandWidthRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1021,WLSR-AP-MIB::wlsrFrameLowSpeedRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1022,WLSR-AP-MIB::wlsrFrameNonUnicastRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1023,WLSR-AP-MIB::wlsrLoadbalancingEnabled,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1024,WLSR-AP-MIB::wlsrChannelFrameRetryRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1025,WLSR-AP-MIB::wlsrChannelFrameFragmentationRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1026,WLSR-AP-MIB::wlsrChannelFrameErrorRateExceeded,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1027,WLSR-AP-MIB::wlsrSignatureMatch,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1028,WLSR-AP-MIB::wlsrChannelRateAnomaly,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1029,WLSR-AP-MIB::wlsrNodeRateAnomaly,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1030,WLSR-AP-MIB::wlsrEAPRateAnomaly,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1031,WLSR-AP-MIB::wlsrSignalAnomaly,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1032,WLSR-AP-MIB::wlsrSequenceNumberAnomaly,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1033,WLSR-AP-MIB::wlsrDisconnectStationAttack,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1034,WLSR-AP-MIB::wlsrApFloodAttack,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1035,WLSR-AP-MIB::wlsrAdhocNetwork,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1036,WLSR-AP-MIB::wlsrWirelessBridge,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1037,WLSR-AP-MIB::wlsrInvalidMacOUI,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1038,WLSR-AP-MIB::wlsrLoadbalancingDisabled,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1039,WLSR-AP-MIB::wlsrWEPMisconfiguration,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1040,WLSR-AP-MIB::wlsrStaRepeatWEPIVViolation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1041,WLSR-AP-MIB::wlsrStaWeakWEPIVViolation,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1042,WLSR-AP-MIB::wlsrStaAssociatedToUnsecureAp,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1043,WLSR-AP-MIB::wlsrAdhocNetworkBridgeDetected,,,,,,
.1.3.6.1.4.1.14823.2.3.1.1.100.1044,WLSR-AP-MIB::wlsrInterferingApDetected,,,,,,
.1.3.6.1.4.1.14823.2.3.1.11,WLSX-TRAP-MIB::wlsrTrapMIB,,,,,,This MIB defines the Traps generated by the switch.
.1.3.6.1.4.1.14823.2.3.1.11.1,WLSX-TRAP-MIB::wlsxTrapsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.11.1.1,WLSX-TRAP-MIB::wlsxTrapObjectsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.11.1.1.1,WLSX-TRAP-MIB::wlsxTrapAPMacAddress,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate  the wired MAC address of an access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.2,WLSX-TRAP-MIB::wlsxTrapAPIpAddress,IpAddress,accessible-for-notify,,current,,  This object is used in the traps to indicate  the IP address of an access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.3,WLSX-TRAP-MIB::wlsxTrapAPBSSID,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the BSSID of the access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.4,WLSX-TRAP-MIB::wlsxTrapEssid,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.5,WLSX-TRAP-MIB::wlsxTrapTargetAPBSSID,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.6,WLSX-TRAP-MIB::wlsxTrapTargetAPSSID,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.7,WLSX-TRAP-MIB::wlsxTrapTargetAPChannel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the channel of the access point, for which the trap is being raised. If an air monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.8,WLSX-TRAP-MIB::wlsxTrapNodeMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of a node. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.9,WLSX-TRAP-MIB::wlsxTrapSourceMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the source. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.10,WLSX-TRAP-MIB::wlsxReceiverMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the receiver. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.11,WLSX-TRAP-MIB::wlsxTrapTransmitterMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the transmitter. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.12,WLSX-TRAP-MIB::wlsxTrapReceiverMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the receiver. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.13,WLSX-TRAP-MIB::wlsxTrapSnr,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Signal to Noise ratio. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.14,WLSX-TRAP-MIB::wlsxTrapSignatureName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Signature Name. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.15,WLSX-TRAP-MIB::wlsxTrapFrameType,INTEGER,accessible-for-notify,,current,associateRequest(0):associateResponse(1):reassociateRequest(2):reassociateResponse(3):probeRequest(4):probeResponse(5):beacon(8):atim(9):disassociate(10):auth(11):deauth(12),  This object is used in the traps to indicate the Frame Type 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.16,WLSX-TRAP-MIB::wlsxTrapAddressType,INTEGER,accessible-for-notify,,current,srcAddress(1):dstAddress(2):bssid(3),  This object is used in the traps to indicate the Address type. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.17,WLSX-TRAP-MIB::wlsxTrapAPLocation,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Location of the AP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.18,WLSX-TRAP-MIB::wlsxTrapAPChannel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Current Channel. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.19,WLSX-TRAP-MIB::wlsxTrapAPTxPower,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the AP Transmit Power. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.20,WLSX-TRAP-MIB::wlsxTrapMatchedMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.21,WLSX-TRAP-MIB::wlsxTrapMatchedIp,IpAddress,accessible-for-notify,,current,,  This object is used in the traps to indicate the IP address 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.22,WLSX-TRAP-MIB::wlsxTrapRogueIfoURL,OCTET,accessible-for-notify,,current,,  This object is used to point to the WEBUI Rogue AP information URL. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.23,WLSX-TRAP-MIB::wlsxTrapVlanId,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the VLAN Id. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.24,WLSX-TRAP-MIB::wlsxTrapAdminStatus,INTEGER,accessible-for-notify,,current,enabled(1):disabled(2),  This object is used in the traps to indicate the admin status of VLAN. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.25,WLSX-TRAP-MIB::wlsxTrapOperStatus,INTEGER,accessible-for-notify,,current,up(1):down(2):testing(3),  This object is used in the traps to indicate the admin status of VLAN. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.26,WLSX-TRAP-MIB::wlsxTrapAuthServerName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Authentication Server used for Authentication. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.27,WLSX-TRAP-MIB::wlsxTrapAuthServerTimeout,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Authentication Server Timeout. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.28,WLSX-TRAP-MIB::wlsxTrapCardSlot,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Slot in which this card is present. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.29,WLSX-TRAP-MIB::wlsxTrapTemperatureValue,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Temperature Value. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.30,WLSX-TRAP-MIB::wlsxTrapProcessName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Process name. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.31,WLSX-TRAP-MIB::wlsxTrapFanNumber,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Fan Number. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.32,WLSX-TRAP-MIB::wlsxTrapVoltageType,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the type of Voltage. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.33,WLSX-TRAP-MIB::wlsxTrapVoltageValue,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the voltage value in Float. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.34,WLSX-TRAP-MIB::wlsxTrapStationBlackListReason,INTEGER,accessible-for-notify,,current,userDefined(1):mitmAttack(2):authFailure(3):pingFlood(4):sessionFlood(5):synFlood(6):sessionBlacklist(7):ipSpoofing(8):esiBlacklist(9):other(100),  The Reason for which a station is black listed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.35,WLSX-TRAP-MIB::wlsxTrapSpoofedIpAddress,IpAddress,accessible-for-notify,,current,,  This object is used in a trap to identify a spoofed IP address. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.36,WLSX-TRAP-MIB::wlsxTrapSpoofedOldPhyAddress,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify an old MAC address. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.37,WLSX-TRAP-MIB::wlsxTrapSpoofedNewPhyAddress,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify a New MAC address. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.38,WLSX-TRAP-MIB::wlsxTrapDBName,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify name of the database. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.39,WLSX-TRAP-MIB::wlsxTrapDBUserName,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify name of the database user. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.40,WLSX-TRAP-MIB::wlsxTrapDBIpAddress,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify the IpAddress of the  Database. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.41,WLSX-TRAP-MIB::wlsxTrapDBType,INTEGER,accessible-for-notify,,current,mssql(1):mysql(2),  This object is used in a trap to identify the port of the user. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.42,WLSX-TRAP-MIB::wlsxTrapVrrpID,Integer32,accessible-for-notify,,current,,  This object contains the Virtual Router Identifier. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.43,WLSX-TRAP-MIB::wlsxTrapVrrpMasterIp,IpAddress,accessible-for-notify,,current,,  This object contains the Master IP address. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.44,WLSX-TRAP-MIB::wlsxTrapVrrpOperState,INTEGER,accessible-for-notify,,current,initialize(1):backup(2):master(3),  This object represents the VRRP Operational state. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.45,WLSX-TRAP-MIB::wlsxTrapESIServerGrpName,OCTET,accessible-for-notify,,current,,  This object represents the External Services Interface (ESI) Server Group name 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.46,WLSX-TRAP-MIB::wlsxTrapESIServerName,OCTET,accessible-for-notify,,current,,  This object represents the External Services Interface (ESI) Server Name 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.47,WLSX-TRAP-MIB::wlsxTrapESIServerIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents the External Services Interface (ESI) Server IP address 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.48,WLSX-TRAP-MIB::wlsxTrapLicenseDaysRemaining,Integer32,accessible-for-notify,,current,,  This object represents number of the days remaining prior to a  license expiry. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.49,WLSX-TRAP-MIB::wlsxTrapSwitchIp,IpAddress,accessible-for-notify,,current,,  This object represents the controller IP address.  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.50,WLSX-TRAP-MIB::wlsxTrapSwitchRole,INTEGER,accessible-for-notify,,current,master(1):local(2):backupmaster(3),  This object represents the Role of the controller.  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.51,WLSX-TRAP-MIB::wlsxTrapUserIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents IP address of the User. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.52,WLSX-TRAP-MIB::wlsxTrapUserPhyAddress,OCTET,accessible-for-notify,,current,,  This object represents MAC address of the User. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.53,WLSX-TRAP-MIB::wlsxTrapUserName,OCTET,accessible-for-notify,,current,,  This object represents the user name. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.54,WLSX-TRAP-MIB::wlsxTrapUserRole,OCTET,accessible-for-notify,,current,,  This object represents the Authentication method of the user. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.55,WLSX-TRAP-MIB::wlsxTrapUserAuthenticationMethod,INTEGER,accessible-for-notify,,current,none(0):web(1):mac(2):vpn(3):dot1x(4):kerberos(5):secureId(7):pubcookie(15):xSec(16):xSecMachine(17):via-vpn(28):other(255),  This object represents the Authentication method of the user. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.56,WLSX-TRAP-MIB::wlsxTrapAPRadioNumber,Integer32,accessible-for-notify,,current,,  This object represents the radio number. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.57,WLSX-TRAP-MIB::wlsxTrapRogueInfoURL,OCTET,accessible-for-notify,,current,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.58,WLSX-TRAP-MIB::wlsxTrapInterferingAPInfoURL,OCTET,accessible-for-notify,,current,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.59,WLSX-TRAP-MIB::wlsxTrapPortNumber,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the port number. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.60,WLSX-TRAP-MIB::wlsxTrapTime,OCTET,accessible-for-notify,,current,,  This object is used in all the enterprise traps to indicate the the time when the trap is generated on the controller. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.61,WLSX-TRAP-MIB::wlsxTrapHostIp,IpAddress,accessible-for-notify,,current,,  This object represents the Trap host.  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.62,WLSX-TRAP-MIB::wlsxTrapHostPort,Integer32,accessible-for-notify,,current,,  This object represents the Trap host port.  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.63,WLSX-TRAP-MIB::wlsxTrapConfigurationId,Integer32,accessible-for-notify,,current,,  This object represents the ID of the configuration, to be used in traps. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.64,WLSX-TRAP-MIB::wlsxTrapCTSURL,OCTET,accessible-for-notify,,current,,  This object represents the URL from which the transfer should happen. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.65,WLSX-TRAP-MIB::wlsxTrapCTSTransferType,OCTET,accessible-for-notify,,current,,  This object represents the transfer type, upload or download. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.66,WLSX-TRAP-MIB::wlsxTrapConfigurationState,INTEGER,accessible-for-notify,,current,success(1):error(2),  This object represents state of the configuration transfer. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.67,WLSX-TRAP-MIB::wlsxTrapUpdateFailureReason,OCTET,accessible-for-notify,,current,,  This object represents the reason for the update failure. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.68,WLSX-TRAP-MIB::wlsxTrapUpdateFailedObj,OCTET,accessible-for-notify,,current,,  This variable represents the AMAPI object which is the reason for the the update failure. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.69,WLSX-TRAP-MIB::wlsxTrapTableEntryChangeType,INTEGER,accessible-for-notify,,current,create(1):delete(2):modify(3),  This object represents type of the configuration change.  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.70,WLSX-TRAP-MIB::wlsxTrapGlobalConfigObj,OCTET,accessible-for-notify,,current,,  This variable represents the AMAPI object corresponding to the global configuration change. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.71,WLSX-TRAP-MIB::wlsxTrapTableGenNumber,Integer32,accessible-for-notify,,current,,  This object represents generation number of a table. Used in the MMS, to keep track of the table content changes. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.72,WLSX-TRAP-MIB::wlsxTrapLicenseId,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the license ID. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.73,WLSX-TRAP-MIB::wlsxTrapConfidenceLevel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Confidence Level as a percentage 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.74,WLSX-TRAP-MIB::wlsxTrapMissingLicenses,OCTET,accessible-for-notify,,current,,  This variable indicates any licenses that are not present during a configuration update 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.75,WLSX-TRAP-MIB::wlsxVoiceCurrentNumCdr,Integer32,accessible-for-notify,,current,,  This object represents the number of CDRs in buffer. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.76,WLSX-TRAP-MIB::wlsxTrapTunnelId,Integer32,accessible-for-notify,,current,,  This Object represents the tunnel ID. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.77,WLSX-TRAP-MIB::wlsxTrapTunnelStatus,Integer32,accessible-for-notify,,current,,  This Object represents the tunnel Status. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.78,WLSX-TRAP-MIB::wlsxTrapTunnelUpReason,OCTET,accessible-for-notify,,current,,  This Object represents the tunnel up reason. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.79,WLSX-TRAP-MIB::wlsxTrapTunnelDownReason,OCTET,accessible-for-notify,,current,,  This Object represents the tunnel down reason. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.80,WLSX-TRAP-MIB::wlsxTrapApSerialNumber,OCTET,accessible-for-notify,,current,,  This object represents the AP Serial Number. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.81,WLSX-TRAP-MIB::wlsxTrapTimeStr,OCTET,accessible-for-notify,,current,,  This object represents the Time in String format. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.82,WLSX-TRAP-MIB::wlsxTrapMasterIp,IpAddress,accessible-for-notify,,current,,  This object represents the master IP address.  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.83,WLSX-TRAP-MIB::wlsxTrapLocalIp,IpAddress,accessible-for-notify,,current,,  This object represents the Local IP address. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.84,WLSX-TRAP-MIB::wlsxTrapMasterName,OCTET,accessible-for-notify,,current,,  This object represents the master controller name. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.85,WLSX-TRAP-MIB::wlsxTrapLocalName,OCTET,accessible-for-notify,,current,,  This object represents the local controller name. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.86,WLSX-TRAP-MIB::wlsxTrapPrimaryControllerIp,IpAddress,accessible-for-notify,,current,,  This object represents the IP address of the AP's primary controller. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.87,WLSX-TRAP-MIB::wlsxTrapBackupControllerIp,IpAddress,accessible-for-notify,,current,,  This object represents the IP address of the AP's backup controller. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.88,WLSX-TRAP-MIB::wlsxTrapSpoofedFrameType,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Spoofed Frame Type 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.89,WLSX-TRAP-MIB::wlsxTrapAssociationType,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the type of association 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.90,WLSX-TRAP-MIB::wlsxTrapDeviceIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents the IP address of a device seen by an AP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.91,WLSX-TRAP-MIB::wlsxTrapDeviceMac,OCTET,accessible-for-notify,,current,,  This object represents the MAC address of a device seen by an AP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.92,WLSX-TRAP-MIB::wlsxTrapVcIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents the Ip Address of a Voice client. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.93,WLSX-TRAP-MIB::wlsxTrapVcMacAddress,OCTET,accessible-for-notify,,current,,  This object represents the MAC address of a Voice client. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.94,WLSX-TRAP-MIB::wlsxTrapAPName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Name of the AP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.95,WLSX-TRAP-MIB::wlsxTrapApMode,Integer32,accessible-for-notify,,current,,  This Object represents the AP Mode. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.96,WLSX-TRAP-MIB::wlsxTrapAPPrevChannel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Previous Channel. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.97,WLSX-TRAP-MIB::wlsxTrapAPPrevChannelSec,INTEGER,accessible-for-notify,,current,none(1):above(2):below(3):eighty(4),  This object is used in the traps to indicate the Previous Secondary Channel. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.98,WLSX-TRAP-MIB::wlsxTrapAPPrevTxPower,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate previous AP Transmit Power. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.99,WLSX-TRAP-MIB::wlsxTrapAPCurMode,INTEGER,accessible-for-notify,,current,airMonitor(1):accessPoint(2):accessPointAndMonitor(3):meshPortal(4):meshPoint(5):rfprotectSensor(6):spectrumSensor(7),  This Object represents the APs Current Mode. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.100,WLSX-TRAP-MIB::wlsxTrapAPPrevMode,INTEGER,accessible-for-notify,,current,airMonitor(1):accessPoint(2):accessPointAndMonitor(3):meshPortal(4):meshPoint(5):rfprotectSensor(6):spectrumSensor(7),  This Object represents the APs Previous Mode. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.101,WLSX-TRAP-MIB::wlsxTrapAPARMChangeReason,INTEGER,accessible-for-notify,,current,radarDetected(1):radarCleared(2):txHang(3):txHangClear(4):fortyMhzIntol(5):cancel40mhzIntol(6):fortyMhzAlign(7):armInterference(8):armInvalidCh(9):armErrorThresh(10):armNoiseThresh(11):armEmptyCh(12):armRogueCont(13):armDecreasePower(14):armIncreasePower(15):armTurnOffRadio(16):armTurnOnRadio(17):armChannelQualityThresh(18),  This Object represents the APs Previous Mode. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.102,WLSX-TRAP-MIB::wlsxTrapAPChannelSec,INTEGER,accessible-for-notify,,current,none(1):above(2):below(3):eighty(4),  This object is used in the traps to indicate the Current Secondary Channel. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.103,WLSX-TRAP-MIB::wlsxTrapUserAttributeChangeType,INTEGER,accessible-for-notify,,current,create(1):delete(2):modify(3),  This object represents type of the configuration change.  
.1.3.6.1.4.1.14823.2.3.1.11.1.1.104,WLSX-TRAP-MIB::wlsxTrapApControllerIp,IpAddress,accessible-for-notify,,current,,  IP address of the controller to which the AP is (or was most recently) registered. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.105,WLSX-TRAP-MIB::wlsxTrapApMasterStatus,INTEGER,accessible-for-notify,,current,up(1):down(2):move(3),  Status of the AP as seen by the master when the status changes. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.106,WLSX-TRAP-MIB::wlsxTrapCaName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the name of the trustpoint. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.107,WLSX-TRAP-MIB::wlsxTrapCrlName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the name of the crl. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.108,WLSX-TRAP-MIB::wlsxTrapCount,Integer32,accessible-for-notify,,current,,  This object represents the number of occurrence of this trap. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.109,WLSX-TRAP-MIB::wlsxTrapPowerSupplyNumber,Integer32,accessible-for-notify,,current,,  This object represents the power supply number. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.110,WLSX-TRAP-MIB::wlsxTrapFanTrayNumber,Integer32,accessible-for-notify,,current,,  This object represents the Fan Tray number. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.111,WLSX-TRAP-MIB::wlsxTrapClientClassification,INTEGER,accessible-for-notify,,current,unknown(0):valid(1):interfering(2):dos(3),  This object is used in the traps to indicate the classification of the client. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.112,WLSX-TRAP-MIB::wlsxThresholdResourceType,INTEGER,accessible-for-notify,,current,dataPathCpu(0):controlPathCpu(1):controlPathMemory(2):totalTunnelCapacity(3):userCapacity(4):noofAps(5):noofLocals(6),  This object represents the Threshold alert's Resource Type . 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.113,WLSX-TRAP-MIB::wlsxThresholdResourceName,OCTET,accessible-for-notify,,current,,  This object represents the Threshold alert's Resource Name . 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.114,WLSX-TRAP-MIB::wlsxThresholdValue,Integer32,accessible-for-notify,,current,,  This object represents the Threshold alert's set threshold value. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.115,WLSX-TRAP-MIB::wlsxResourceValue,Integer32,accessible-for-notify,,current,,  This object represents the Threshold alert's actual value. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.116,WLSX-TRAP-MIB::wlsxStackPrevSlot,Integer32,accessible-for-notify,,current,,  This object specifies the slot number of this stack element prior to topology change in stack. A value of -1 indicates that this slot was not in Active state of stack prior to topology change. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.117,WLSX-TRAP-MIB::wlsxStackCurrentSlot,Integer32,accessible-for-notify,,current,,  This object specifies the slot number of this stack element after the topology change in stack. A value of -1 indicates that this slot is not in Active state of stack after the topology change. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.118,WLSX-TRAP-MIB::wlsxStackPrevState,INTEGER,accessible-for-notify,,current,primary(1):secondary(2):linecard(3):away(4),  This object specifies the state of this stack element prior to topology change in stack. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.119,WLSX-TRAP-MIB::wlsxStackCurrentState,INTEGER,accessible-for-notify,,current,primary(1):secondary(2):linecard(3):away(4),  This object specifies the state of this stack element after topology change in stack. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.120,WLSX-TRAP-MIB::wlsxStackChangeEvent,INTEGER,accessible-for-notify,,current,other(1):primarySlotChanged(2):secondarySlotChanged(3):lineCardSlotChanged(4):roleChanged(5):priorityChanged(6):versionMismatch(7):slotExceeded(8),  This object specifies the event which caused change in topology in stack. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.121,WLSX-TRAP-MIB::wlsxStackProtoIfTopoJoined,INTEGER,accessible-for-notify,,current,connected(1):disconnected(2),  This object specifies whether an interface has joined the stacking topology or left the topology. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.122,WLSX-TRAP-MIB::wlsxStackMemberMacAddress,OCTET,accessible-for-notify,,current,,  This object specifies mac-address of this stack element. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.123,WLSX-TRAP-MIB::wlsxStackMemberSlotNumber,Integer32,accessible-for-notify,,current,,  This object specifies the slot number of this element in stack. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.124,WLSX-TRAP-MIB::wlsxStackIfName,OCTET,accessible-for-notify,,current,,  This object specifies the interface name which is part of stacking link connected to other stacking element. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.125,WLSX-TRAP-MIB::wlsxTrapLicenseServerDaysRemaining,Integer32,accessible-for-notify,,current,,  This object represents number of the days remaining prior to expiry  of license limits sent by the server. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.126,WLSX-TRAP-MIB::wlsxTrapLicenseClientDaysRemaining,Integer32,accessible-for-notify,,current,,  This object represents number of the days remaining prior to expiry  of licenses contributed by a license client. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.127,WLSX-TRAP-MIB::wlsxIfIndex,Integer32,accessible-for-notify,,current,,  This object specifies the ifIndex. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.128,WLSX-TRAP-MIB::wlsxIfState,INTEGER,accessible-for-notify,,current,linkUp(1):linkDown(2),  This object specifies the state of an interface. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.129,WLSX-TRAP-MIB::wlsxIfStateChangeReason,INTEGER,accessible-for-notify,,current,admin(1):loopProtect(2):macLimit(3):raGuard(4):bpduGuard(5),  This object specifies the reason for interface state change. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.130,WLSX-TRAP-MIB::wlsxTrapAPPreviousUplinkType,INTEGER,accessible-for-notify,,current,ethernet(1):usb(2):pppoe(3):wifi(4),  This object specifies the up link type for an AP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.131,WLSX-TRAP-MIB::wlsxTrapAPPreviousUplinkActiveTime,TimeTicks,accessible-for-notify,,current,,  This object specifies the up link type for an AP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.132,WLSX-TRAP-MIB::wlsxTrapAPActiveUplinkType,INTEGER,accessible-for-notify,,current,ethernet(1):usb(2):pppoe(3):wifi(4),  This object specifies the up link type for an AP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.133,WLSX-TRAP-MIB::wlsxTrapAPUplinkChangeReason,INTEGER,accessible-for-notify,,current,linkFailure(1):vpnFailure(2):preemption(3),  This object specifies the up link change reason. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.134,WLSX-TRAP-MIB::wlsxTrapExpiringCertName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the name of the certificate that is expiring in less than 60 days. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.135,WLSX-TRAP-MIB::wlsxTrapExpiredCertName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the name of the certificate that has expired. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.136,WLSX-TRAP-MIB::wlsxTrapHTMode,Integer32,accessible-for-notify,,current,,  This object represents HT Mode. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.137,WLSX-TRAP-MIB::wlsxTrapPhyType,Integer32,accessible-for-notify,,current,,  This object represents Physical Type. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.138,WLSX-TRAP-MIB::wlsxTrapAPManagedModeConfigFailure,OCTET,accessible-for-notify,,current,,  This object indicates the error for the failure of config apply on IAP. 
.1.3.6.1.4.1.14823.2.3.1.11.1.1.139,WLSX-TRAP-MIB::wlsxTrapAuthServerAddress,IpAddress,accessible-for-notify,,current,,  This object is used in the traps to indicate the Authentication Server IP used for Authentication. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2,WLSX-TRAP-MIB::wlsxTrapDefinitionsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1000,WLSX-TRAP-MIB::wlsxVlanLinkUp,,,,,,  This trap indicates that a VLAN interface is up. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1001,WLSX-TRAP-MIB::wlsxVlanLinkDown,,,,,,  This trap indicates that a VLAN interface is down. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1002,WLSX-TRAP-MIB::wlsxSignatureMatch,,,,,,  This trap indicates that a signature match was detected. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1003,WLSX-TRAP-MIB::wlsxNodeRateAnomaly,,,,,,  This trap indicates that a node is exceeding the threshold set for  the frame type. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1004,WLSX-TRAP-MIB::wlsxNormalTemperature,,,,,,  This trap indicates that the Temperature has returned to  an acceptable range. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1005,WLSX-TRAP-MIB::wlsxProcessRestart,,,,,,  This trap indicates that the named process has been restarted. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1006,WLSX-TRAP-MIB::wlsxFlashSpaceOK,,,,,,  This trap which indicates that the system flash space is back  to a sufficient level. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1007,WLSX-TRAP-MIB::wlsxMemoryUsageOK,,,,,,  This trap which indicates that the free memory usage is back  to a sufficient level. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1008,WLSX-TRAP-MIB::wlsxPowerSupplyOK,,,,,,  This trap indicates that the system power supply condition have returned to normal operation status. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1009,WLSX-TRAP-MIB::wlsxFanOK,,,,,,  This trap indicates that the fan has returned to normal. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1010,WLSX-TRAP-MIB::wlsxInRangeVoltage,,,,,,  This trap indicates that the controller Voltage is back within range. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1011,WLSX-TRAP-MIB::wlsxCoverageHoleResolved,,,,,,  This trap indicates that a coverage hole at location  wlsxTrapAPLocation has been resolved. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1012,WLSX-TRAP-MIB::wlsxNSwitchIPChanged,,,,,,  This trap indicates that the controller IP address has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1013,WLSX-TRAP-MIB::wlsxNSwitchRoleChange,,,,,,  This trap indicates that the role of the controller IP address has  changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1014,WLSX-TRAP-MIB::wlsxNUserEntryCreated,,,,,,  This trap indicates that a new user was created. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1015,WLSX-TRAP-MIB::wlsxNUserEntryDeleted,,,,,,  This trap indicates that a user was deleted. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1016,WLSX-TRAP-MIB::wlsxNUserEntryAuthenticated,,,,,,  This trap indicates that a user is Authenticated. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1017,WLSX-TRAP-MIB::wlsxNUserEntryDeAuthenticated,,,,,,  This trap indicates that a user is Deauthenticated. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1018,WLSX-TRAP-MIB::wlsxNUserAuthenticationFailed,,,,,,  This trap indicates that a user authentication has failed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1019,WLSX-TRAP-MIB::wlsxNAuthServerReqTimedOut,,,,,,  This trap indicates that the authentication server request timed out. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1020,WLSX-TRAP-MIB::wlsxNAuthServerTimedOut,,,,,,  This trap indicates that the authentication server timed out. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1021,WLSX-TRAP-MIB::wlsxNAuthServerIsUp,,,,,,  This trap indicates that an authentication server is up. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1022,WLSX-TRAP-MIB::wlsxNAuthMaxUserEntries,,,,,,  A trap which indicates that the user entries table is full and  cannot add any more entries. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1023,WLSX-TRAP-MIB::wlsxNAuthMaxAclEntries,,,,,,  A trap which indicates that the ACL Entries table is full and  cannot add any more entries. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1024,WLSX-TRAP-MIB::wlsxNAuthMaxBWContracts,,,,,,  A trap which indicates that the controller reached the maximum number  of configurable Bandwidth contracts.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1025,WLSX-TRAP-MIB::wlsxNPowerSupplyFailure,,,,,,  A trap which indicates that the power supply has failed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1026,WLSX-TRAP-MIB::wlsxNFanFailure,,,,,,  A trap which indicates that the fan has failed or is missing. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1027,WLSX-TRAP-MIB::wlsxNOutOfRangeVoltage,,,,,,  A trap which indicates that the controller voltage is out of range. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1028,WLSX-TRAP-MIB::wlsxNOutOfRangeTemperature,,,,,,  A trap which indicates that the controller internal temperature is out of range.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1029,WLSX-TRAP-MIB::wlsxNLCInserted,,,,,,  A Trap which indicates that a line card is inserted. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1030,WLSX-TRAP-MIB::wlsxNSCInserted,,,,,,  a Trap which indicates that a supervisor card is inserted. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1031,WLSX-TRAP-MIB::wlsxNGBICInserted,,,,,,  A Trap which indicates that a GBIC is inserted in a Line Card. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1032,WLSX-TRAP-MIB::wlsxNProcessDied,,,,,,  A Trap which indicates that a process has died. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1033,WLSX-TRAP-MIB::wlsxNProcessExceedsMemoryLimits,,,,,,  A Trap which indicates that a process is consuming Large amounts of memory. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1034,WLSX-TRAP-MIB::wlsxNLowOnFlashSpace,,,,,,  A Trap which indicates that the controller is running low on flash space. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1035,WLSX-TRAP-MIB::wlsxNLowMemory,,,,,,  A Trap which indicates that the system free memory is low. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1036,WLSX-TRAP-MIB::wlsxNFanTrayRemoved,,,,,,  A Trap which indicates that a fan tray is removed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1037,WLSX-TRAP-MIB::wlsxNFanTrayInserted,,,,,,  A Trap which indicates that a fan tray is inserted. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1038,WLSX-TRAP-MIB::wlsxNLCRemoved,,,,,,  A Trap which indicates that a Line card is removed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1039,WLSX-TRAP-MIB::wlsxNPowerSupplyMissing,,,,,,  A Trap which indicates that the power supply is missing. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1040,WLSX-TRAP-MIB::wlsxNAccessPointIsUp,,,,,,  A Trap which indicates that an access point up. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1041,WLSX-TRAP-MIB::wlsxNAccessPointIsDown,,,,,,  A Trap which indicates that an access point down. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1042,WLSX-TRAP-MIB::wlsxNCoverageHoleDetected,,,,,,  This trap indicates that an access point at Location  wlsxTrapAPLocation has detected a Coverage Hole. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1043,WLSX-TRAP-MIB::wlsxNChannelChanged,,,,,,  This trap indicates that an access point at Location  wlsxTrapAPLocation has changed the channel. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1044,WLSX-TRAP-MIB::wlsxNStationAddedToBlackList,,,,,,  This trap indicates that the station is black listed.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1045,WLSX-TRAP-MIB::wlsxNStationRemovedFromBlackList,,,,,,  This trap indicates that the station is removed from the black list.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1046,WLSX-TRAP-MIB::wlsxNIpSpoofingDetected,,,,,,  A trap indicating that the controller detected IP Spoofing.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1047,WLSX-TRAP-MIB::wlsxNDBCommunicationFailure,,,,,,  This trap indicates that communication with Database failed.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1048,WLSX-TRAP-MIB::wlsxNVrrpStateChange,,,,,,  This trap indicates that VRRP state has changed on the controller.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1049,WLSX-TRAP-MIB::wlsxNRadioAttributesChanged,,,,,,  A Trap which indicates changes in the Radio attributes of an  access point. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1050,WLSX-TRAP-MIB::wlsxNESIServerUp,,,,,,  A Trap which indicates that a ESI server is up. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1051,WLSX-TRAP-MIB::wlsxNESIServerDown,,,,,,  A Trap which indicates that a ESI server is down. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1052,WLSX-TRAP-MIB::wlsxNLicenseExpiry,,,,,,  A Trap which indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1053,WLSX-TRAP-MIB::wlsxUnsecureAPDetected,,,,,, This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1054,WLSX-TRAP-MIB::wlsxUnsecureAPResolved,,,,,,  This trap indicates that a previously detected access point, classified as Rogue, is no longer present in the network.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1055,WLSX-TRAP-MIB::wlsxStaImpersonation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1056,WLSX-TRAP-MIB::wlsxReservedChannelViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1057,WLSX-TRAP-MIB::wlsxValidSSIDViolation,,,,,,  Valid SSID configuration by using an SSID that is reserved for use by a valid AP only. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1058,WLSX-TRAP-MIB::wlsxChannelMisconfiguration,,,,,,  because it is using a channel that is not valid. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1059,WLSX-TRAP-MIB::wlsxOUIMisconfiguration,,,,,,  it is using an OUI that is not valid.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1060,WLSX-TRAP-MIB::wlsxSSIDMisconfiguration,,,,,,  an SSID that is not valid.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1061,WLSX-TRAP-MIB::wlsxShortPreableMisconfiguration,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1062,WLSX-TRAP-MIB::wlsxWPAMisconfiguration,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1063,WLSX-TRAP-MIB::wlsxAdhocNetworkDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1064,WLSX-TRAP-MIB::wlsxAdhocNetworkRemoved,,,,,,  longer present in the network.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1065,WLSX-TRAP-MIB::wlsxStaPolicyViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1066,WLSX-TRAP-MIB::wlsxRepeatWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1067,WLSX-TRAP-MIB::wlsxWeakWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1068,WLSX-TRAP-MIB::wlsxChannelInterferenceDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1069,WLSX-TRAP-MIB::wlsxChannelInterferenceCleared,,,,,,  is no longer present. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1070,WLSX-TRAP-MIB::wlsxAPInterferenceDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1071,WLSX-TRAP-MIB::wlsxAPInterferenceCleared,,,,,,  is no longer present. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1072,WLSX-TRAP-MIB::wlsxStaInterferenceDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1073,WLSX-TRAP-MIB::wlsxStaInterferenceCleared,,,,,,  is no longer present. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1074,WLSX-TRAP-MIB::wlsxFrameRetryRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1075,WLSX-TRAP-MIB::wlsxFrameReceiveErrorRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1076,WLSX-TRAP-MIB::wlsxFrameFragmentationRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1077,WLSX-TRAP-MIB::wlsxFrameBandWidthRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1078,WLSX-TRAP-MIB::wlsxFrameLowSpeedRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1079,WLSX-TRAP-MIB::wlsxFrameNonUnicastRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1080,WLSX-TRAP-MIB::wlsxLoadbalancingEnabled,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1081,WLSX-TRAP-MIB::wlsxLoadbalancingDisabled,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1082,WLSX-TRAP-MIB::wlsxChannelFrameRetryRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1083,WLSX-TRAP-MIB::wlsxChannelFrameFragmentationRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1084,WLSX-TRAP-MIB::wlsxChannelFrameErrorRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1085,WLSX-TRAP-MIB::wlsxSignatureMatchAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1086,WLSX-TRAP-MIB::wlsxSignatureMatchSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1087,WLSX-TRAP-MIB::wlsxChannelRateAnomaly,,,,,,  exceed the configured IDS rate threshold.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1088,WLSX-TRAP-MIB::wlsxNodeRateAnomalyAP,,,,,,  access point, which exceed the configured IDS rate threshold.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1089,WLSX-TRAP-MIB::wlsxNodeRateAnomalySta,,,,,,  node, which exceed the configured IDS rate threshold.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1090,WLSX-TRAP-MIB::wlsxEAPRateAnomaly,,,,,,  received by an AP has exceeded the configured IDS EAP Handshake rate threshold.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1091,WLSX-TRAP-MIB::wlsxSignalAnomaly,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1092,WLSX-TRAP-MIB::wlsxSequenceNumberAnomalyAP,,,,,,  The acceptable sequence number difference is an IDS configuration  object.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1093,WLSX-TRAP-MIB::wlsxSequenceNumberAnomalySta,,,,,,  The acceptable sequence number difference is an IDS configuration  object. For more info check: http://www.wve.org/entries/show/WVE-2005-0061
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1094,WLSX-TRAP-MIB::wlsxDisconnectStationAttack,,,,,,  attack.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1095,WLSX-TRAP-MIB::wlsxApFloodAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1096,WLSX-TRAP-MIB::wlsxAdhocNetwork,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1097,WLSX-TRAP-MIB::wlsxWirelessBridge,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1098,WLSX-TRAP-MIB::wlsxInvalidMacOUIAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1099,WLSX-TRAP-MIB::wlsxInvalidMacOUISta,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1100,WLSX-TRAP-MIB::wlsxWEPMisconfiguration,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1101,WLSX-TRAP-MIB::wlsxStaRepeatWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1102,WLSX-TRAP-MIB::wlsxStaWeakWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1103,WLSX-TRAP-MIB::wlsxStaAssociatedToUnsecureAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1104,WLSX-TRAP-MIB::wlsxStaUnAssociatedFromUnsecureAP,,,,,,  association is no longer present.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1105,WLSX-TRAP-MIB::wlsxAdhocNetworkBridgeDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1106,WLSX-TRAP-MIB::wlsxInterferingApDetected,,,,,,  is declared Interfering because it is neither authorized or classified as Rogue. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1107,WLSX-TRAP-MIB::wlsxPortUp,,,,,,  This trap indicates that a Physical port is up. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1108,WLSX-TRAP-MIB::wlsxPortDown,,,,,,  This trap indicates that a Physical port is Down. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1109,WLSX-TRAP-MIB::wlsxBSSIDIsUp,,,,,,  A Trap which indicates that an access point BSSID is up. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1110,WLSX-TRAP-MIB::wlsxBSSIDIsDown,,,,,,  A Trap which indicates that an access point BSSID is down. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1111,WLSX-TRAP-MIB::wlsxColdStart,,,,,,  An enterprise version of cold start trap, which contains the controller time stamp. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1112,WLSX-TRAP-MIB::wlsxWarmStart,,,,,,  An enterprise version of warm start trap, which contains the controller time stamp. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1113,WLSX-TRAP-MIB::wlsxAPImpersonation,,,,,,  The expected number is calculated based on the Beacon Interval Field in the Beacon frame.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1114,WLSX-TRAP-MIB::wlsxInformQueueOverFlow,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1115,WLSX-TRAP-MIB::wlsxNAuthServerIsDown,,,,,,  This trap indicates that an authentication server is down. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1116,WLSX-TRAP-MIB::wlsxCTSTransferError,,,,,,  This trap indicates the status of the configuration transfer from the management station. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1117,WLSX-TRAP-MIB::wlsxCTSTransferSucceeded,,,,,,  This trap indicates the status of the configuration transfer from the management station. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1118,WLSX-TRAP-MIB::wlsxConfigurationUpdateError,,,,,,  This trap indicates the configuration update status. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1119,WLSX-TRAP-MIB::wlsxConfigurationUpdateSucceeded,,,,,,  This trap indicates the configuration update status. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1120,WLSX-TRAP-MIB::wlsxGlobalConfigurationChangeNotification,,,,,,  This trap indicates that global configuration was modified on the controller. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1121,WLSX-TRAP-MIB::wlsxUserEntryChanged,,,,,,  This trap indicates that the user configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1122,WLSX-TRAP-MIB::wlsxAPBssidEntryChanged,,,,,,  This trap indicates that the BSSID configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1123,WLSX-TRAP-MIB::wlsxAPRadioEntryChanged,,,,,,  This trap indicates that the Radio configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1124,WLSX-TRAP-MIB::wlsxAPEntryChanged,,,,,,  This trap indicates that the AP configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1125,WLSX-TRAP-MIB::wlsxSwitchListEntryChanged,,,,,,  This trap indicates that the controller list has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1126,WLSX-TRAP-MIB::wlsxPortEntryChanged,,,,,,  This trap indicates that the port configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1127,WLSX-TRAP-MIB::wlsxVlanEntryChanged,,,,,,  This trap indicates that the VLAN configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1128,WLSX-TRAP-MIB::wlsxVlanInterfaceEntryChanged,,,,,,  This trap indicates that the VLAN Interface configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1129,WLSX-TRAP-MIB::wlsxWindowsBridgeDetected,,,,,,  to a wired network
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1130,WLSX-TRAP-MIB::wlsxLicenseEntryChanged,,,,,,  This trap indicates that the license table has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1131,WLSX-TRAP-MIB::wlsxEsiServerChanged,,,,,,  This trap indicates that the ESI server table has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1132,WLSX-TRAP-MIB::wlsxMonAPEntryChanged,,,,,,  This trap indicates that a monitored AP entry changed 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1133,WLSX-TRAP-MIB::wlsxMonStationEntryChanged,,,,,,  This trap indicates that a monitored station entry changed 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1134,WLSX-TRAP-MIB::wlsxSignAPNetstumbler,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1135,WLSX-TRAP-MIB::wlsxSignStaNetstumbler,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1136,WLSX-TRAP-MIB::wlsxSignAPAsleap,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1137,WLSX-TRAP-MIB::wlsxSignStaAsleap,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1138,WLSX-TRAP-MIB::wlsxSignAPAirjack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1139,WLSX-TRAP-MIB::wlsxSignStaAirjack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1140,WLSX-TRAP-MIB::wlsxSignAPNullProbeResp,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1141,WLSX-TRAP-MIB::wlsxSignStaNullProbeResp,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1142,WLSX-TRAP-MIB::wlsxSignAPDeauthBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1143,WLSX-TRAP-MIB::wlsxSignStaDeauthBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1144,WLSX-TRAP-MIB::wlsxWindowsBridgeDetectedAP,,,,,,  to a wired network.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1145,WLSX-TRAP-MIB::wlsxWindowsBridgeDetectedSta,,,,,,  to a wired network.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1146,WLSX-TRAP-MIB::wlsxAdhocNetworkBridgeDetectedAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1147,WLSX-TRAP-MIB::wlsxAdhocNetworkBridgeDetectedSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1148,WLSX-TRAP-MIB::wlsxDisconnectStationAttackAP,,,,,,  attack.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1149,WLSX-TRAP-MIB::wlsxDisconnectStationAttackSta,,,,,,  attack.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1150,WLSX-TRAP-MIB::wlsxSuspectUnsecureAPDetected,,,,,, This trap indicates that an access point, classified as Suspected Rogue, has been detected by a Controller. The AP is suspected to be rogue,  with the supplied confidence level, because it was matched to  the wired MAC address. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1151,WLSX-TRAP-MIB::wlsxSuspectUnsecureAPResolved,,,,,,  Rogue, is either no longer present in the network or has changed its state.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1152,WLSX-TRAP-MIB::wlsxConfigurationLicenseMismatch,,,,,,  This trap indicates the configuration update status in the case where some configuration could not be applied due to missing licenses. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1153,WLSX-TRAP-MIB::wlsxVoiceCdrBufferThresholdReached,,,,,,  This trap indicates that the CDR buffer threshold has been reached 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1154,WLSX-TRAP-MIB::wlsxTunnelUp,,,,,,  This trap indicates that a tunnel interface is up. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1155,WLSX-TRAP-MIB::wlsxTunnelDown,,,,,,  This trap indicates that a tunnel interface is down. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1156,WLSX-TRAP-MIB::wlsxMeshNodeEntryChanged,,,,,,  This trap indicates that the mesh node configuration has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1157,WLSX-TRAP-MIB::wlsxHtGreenfieldSupported,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1158,WLSX-TRAP-MIB::wlsxHT40MHzIntoleranceAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1159,WLSX-TRAP-MIB::wlsxHT40MHzIntoleranceSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1160,WLSX-TRAP-MIB::wlsxNAuthServerAllInService,,,,,,  This trap indicates that all authentication servers is a server group are brought back in service. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1161,WLSX-TRAP-MIB::wlsxNAdhocNetwork,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1162,WLSX-TRAP-MIB::wlsxNAdhocNetworkBridgeDetectedAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1163,WLSX-TRAP-MIB::wlsxNAdhocNetworkBridgeDetectedSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1164,WLSX-TRAP-MIB::wlsxNAuthMaxXsecUserEntries,,,,,,  A trap which indicates that the xSec user limit is reached. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1165,WLSX-TRAP-MIB::wlsxNVpnMaxSessions,,,,,,  A trap which indicates that the VPN session limit is reached. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1166,WLSX-TRAP-MIB::wlsxNRapExpiredPSK,,,,,,  A trap which indicates that the RAP is using the Expired PSK. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1167,WLSX-TRAP-MIB::wlsxNRapWarnExpiredPSK,,,,,,  A trap which indicates that the Cached IKE PSK for RAPs will expire soon. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1168,WLSX-TRAP-MIB::wlsxNConnectionResetWithLocal,,,,,,  A trap which indicates that tcp connection between master controller and local controller has been lost. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1169,WLSX-TRAP-MIB::wlsxNApOnBackupController,,,,,,  A trap which indicates that the AP has registered with the backup controller. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1170,WLSX-TRAP-MIB::wlsxClientFloodAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1171,WLSX-TRAP-MIB::wlsxValidClientNotUsingEncryption,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1172,WLSX-TRAP-MIB::wlsxAdhocUsingValidSSID,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1173,WLSX-TRAP-MIB::wlsxAPSpoofingDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1174,WLSX-TRAP-MIB::wlsxClientAssociatingOnWrongChannel,,,,,,  being spoofed in order to fool the client into thinking the AP is operating on another channel.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1175,WLSX-TRAP-MIB::wlsxNDisconnectStationAttack,,,,,,  received by that client exceeds the configured threshold.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1176,WLSX-TRAP-MIB::wlsxNStaUnAssociatedFromUnsecureAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1177,WLSX-TRAP-MIB::wlsxOmertaAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1178,WLSX-TRAP-MIB::wlsxTKIPReplayAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1179,WLSX-TRAP-MIB::wlsxChopChopAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1180,WLSX-TRAP-MIB::wlsxFataJackAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1181,WLSX-TRAP-MIB::wlsxInvalidAddressCombination,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1182,WLSX-TRAP-MIB::wlsxValidClientMisassociation,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1183,WLSX-TRAP-MIB::wlsxMalformedHTIEDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1184,WLSX-TRAP-MIB::wlsxMalformedAssocReqDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1185,WLSX-TRAP-MIB::wlsxOverflowIEDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1186,WLSX-TRAP-MIB::wlsxOverflowEAPOLKeyDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1187,WLSX-TRAP-MIB::wlsxMalformedFrameLargeDurationDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1188,WLSX-TRAP-MIB::wlsxMalformedFrameWrongChannelDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1189,WLSX-TRAP-MIB::wlsxMalformedAuthFrame,,,,,,  either a bad algorithm (similar to Fata-Jack) or a bad transaction.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1190,WLSX-TRAP-MIB::wlsxCTSRateAnomaly,,,,,,  received by an AP exceeds the configured IDS threshold.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1191,WLSX-TRAP-MIB::wlsxRTSRateAnomaly,,,,,,  received by an AP exceeds the configured IDS threshold.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1192,WLSX-TRAP-MIB::wlsxNRogueAPDetected,,,,,,  classified as Rogue by the system.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1193,WLSX-TRAP-MIB::wlsxNRogueAPResolved,,,,,,  This trap indicates that a previously detected access point, classified as Rogue, is either no longer present in the network or it changed its state.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1194,WLSX-TRAP-MIB::wlsxNeighborAPDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1195,WLSX-TRAP-MIB::wlsxNInterferingAPDetected,,,,,,  is declared Interfering because it is not authorized, nor has it been classified as a Rogue. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1196,WLSX-TRAP-MIB::wlsxNSuspectRogueAPDetected,,,,,,  detected by the system. The AP is suspected to be rogue  with the supplied confidence level. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1197,WLSX-TRAP-MIB::wlsxNSuspectRogueAPResolved,,,,,,  Rogue, is either no longer present in the network or has changed its state.
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1198,WLSX-TRAP-MIB::wlsxBlockAckAttackDetected,,,,,,  This trap indicates that an attempt has been made to deny service to the source address by spoofing a block ACK add request that sets a sequence number window outside the currently used window. For more info check: http://www.wve.org/entries/show/WVE-2008-0006
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1199,WLSX-TRAP-MIB::wlsxHotspotterAttackDetected,,,,,,  This trap indicates that a new AP has appeared immediately following a client probe request. This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake hotspot or other wireless network. For more info check: http://www.wve.org/entries/show/WVE-2005-0054
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1200,WLSX-TRAP-MIB::wlsxNSignatureMatch,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1201,WLSX-TRAP-MIB::wlsxNSignatureMatchNetstumbler,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1202,WLSX-TRAP-MIB::wlsxNSignatureMatchAsleap,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1203,WLSX-TRAP-MIB::wlsxNSignatureMatchAirjack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1204,WLSX-TRAP-MIB::wlsxNSignatureMatchNullProbeResp,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1205,WLSX-TRAP-MIB::wlsxNSignatureMatchDeauthBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1206,WLSX-TRAP-MIB::wlsxNSignatureMatchDisassocBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1207,WLSX-TRAP-MIB::wlsxNSignatureMatchWellenreiter,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1208,WLSX-TRAP-MIB::wlsxAPDeauthContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1209,WLSX-TRAP-MIB::wlsxClientDeauthContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1210,WLSX-TRAP-MIB::wlsxAPWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1211,WLSX-TRAP-MIB::wlsxClientWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1212,WLSX-TRAP-MIB::wlsxAPTaggedWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1213,WLSX-TRAP-MIB::wlsxClientTaggedWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1214,WLSX-TRAP-MIB::wlsxTarpitContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1215,WLSX-TRAP-MIB::wlsxVoiceClientLocationUpdate,,,,,,  This trap indicates that the location of voice client has been changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1216,WLSX-TRAP-MIB::wlsxAPChannelChange,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1217,WLSX-TRAP-MIB::wlsxAPPowerChange,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1218,WLSX-TRAP-MIB::wlsxAPModeChange,,,,,,  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1219,WLSX-TRAP-MIB::wlsxUserEntryAttributesChanged,,,,,,  This trap indicates that the user entry attributes have changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1220,WLSX-TRAP-MIB::wlsxPowerSaveDosAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1221,WLSX-TRAP-MIB::wlsxNAPMasterStatusChange,,,,,,  This trap indicates that the status of the AP as seen by the master controller has changed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1222,WLSX-TRAP-MIB::wlsxNAdhocUsingValidSSID,,,,,, 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1223,WLSX-TRAP-MIB::wlsxCRLExpired,,,,,,  This trap indicates that the CRL associated with the particular Trustpoint is expired. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1224,WLSX-TRAP-MIB::wlsxMgmtUserAuthenticationFailed,,,,,,  This trap indicates that a management user authentication has failed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1225,WLSX-TRAP-MIB::wlsxNConnectionBackfromLocal,,,,,,  A trap which indicates that tcp connection between master controller and local controller is back. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1226,WLSX-TRAP-MIB::wlsxAPNumUpgradeFailure,,,,,,  A trap which indicates the number of upgrade failure of an access point. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1227,WLSX-TRAP-MIB::wlsxAPNumWarmStarts,,,,,,  A trap which indicates the number of warm starts of an access point. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1228,WLSX-TRAP-MIB::wlsxAPNumColdStarts,,,,,,  A trap which indicates the number of cold starts of an access point. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1229,WLSX-TRAP-MIB::wlsxAPNumDown,,,,,,  A trap which indicates the number of down alarms of an access point. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1230,WLSX-TRAP-MIB::wlsxAPNumRadioDown,,,,,,  A trap which indicates the number of radio down alarms of an access point. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1231,WLSX-TRAP-MIB::wlsxNumClockSyncErrors,,,,,,  A trap which indicates the total number of clock sync errors between the switch and access points. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1232,WLSX-TRAP-MIB::wlsxNumColdStart,,,,,,  A trap which indicates the number of cold-starts of the switch. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1233,WLSX-TRAP-MIB::wlsxNumWarmStart,,,,,,  A trap which indicates the number of warm-starts of the switch. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1234,WLSX-TRAP-MIB::wlsxWirelessHostedNetworkDetected,,,,,,  This trap indicates that an AP detected a wireless client that is hosting a softAP. The softAP could be used to share the hosting  client's wired or wireless network connection with other wireless users.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1235,WLSX-TRAP-MIB::wlsxClientAssociatedToHostedNetwork,,,,,,  This trap indicates that an AP detected that a wireless client associated  to an access point that is hosted by another wireless client. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1236,WLSX-TRAP-MIB::wlsxThresholdExceeded,,,,,,  A trap indicates a particular resource under monitoring has gone above the threshold specified. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1237,WLSX-TRAP-MIB::wlsxThresholdCleared,,,,,,  A trap indicates a particular resource under monitoring has come below the threshold specified. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1238,WLSX-TRAP-MIB::wlsxWirelessHostedNetworkContainment,,,,,,  This trap indicates that containment is being enforced on a client associated to a hosted network. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1239,WLSX-TRAP-MIB::wlsxHostOfWirelessNetworkContainment,,,,,,  This trap indicates that containment is being enforced on a client that is hosting a wireless hosted network. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1240,WLSX-TRAP-MIB::wlsxEnhancedAdhocContainment,,,,,,  This trap indicates that an AP has attempted to contain an adhoc node by disconnecting it from other members of the adhoc network. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1241,WLSX-TRAP-MIB::wlsxPowerSupplyOKTrap,,,,,,  This trap indicates that the system power supply condition have returned to normal operation status. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1242,WLSX-TRAP-MIB::wlsxPowerSupplyFailureTrap,,,,,,  A trap which indicates that the power supply has failed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1243,WLSX-TRAP-MIB::wlsxFanTrayRemovedTrap,,,,,,  A Trap which indicates that a fan tray is removed. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1244,WLSX-TRAP-MIB::wlsxFanTrayInsertedTrap,,,,,,  A Trap which indicates that a fan tray is inserted. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1245,WLSX-TRAP-MIB::wlsxPowerSupplyMissingTrap,,,,,,  A Trap which indicates that the power supply is missing. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1246,WLSX-TRAP-MIB::wlsxStackTopologyChangeTrap,,,,,,  When change happens in any topology of the stack element in the stack, then a notification is sent to the Management Entity. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1247,WLSX-TRAP-MIB::wlsxStackIfStateChangeTrap,,,,,,  When any stacking interface in any stack element joins or leaves stacking topology, then a notification is sent to the Management Entity with slot and interface information. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1248,WLSX-TRAP-MIB::wlsxLicenseServerExpiry,,,,,,  A Trap which indicates that licenses sent from the license  server will expire in wlsxTrapLicenseServerDaysRemaining days. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1249,WLSX-TRAP-MIB::wlsxLicenseClientExpiry,,,,,,  A Trap which indicates that licenses contributed by a license  client will expire in wlsxTrapLicenseClientDaysRemaining days. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1250,WLSX-TRAP-MIB::wlsxIfStateChangeTrap,,,,,,  When the link state of an interface changes due to reason specified by wlsxIfStateChangeReason object, a notification is sent to the Management Entity with reason for this state change and interface information. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1251,WLSX-TRAP-MIB::wlsxWMSOffloadRecommended,,,,,,  This trap indicates that current state in the WMS module shows that WMS is reaching capacity, and  so it is recommended to enable WMS-Offload.  
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1252,WLSX-TRAP-MIB::wlsxAPActiveUplinkChanged,,,,,,  When the active uplink of an AP changes, a notification is sent to the Management Entity with the new uplink type 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1253,WLSX-TRAP-MIB::wlsxCertExpiringSoon,,,,,,  This trap indicates that a particular Certificate is going to expire in less than 60 days. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1254,WLSX-TRAP-MIB::wlsxCertExpired,,,,,,  This trap indicates that a particular Certificate has expired and is no longer valid. 
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1255,WLSX-TRAP-MIB::wlsxAPManagedModeConfigFailureTrap,,,,,,  This trap indicates that config apply has failed on the IAP. 
.1.3.6.1.4.1.14823.2.3.2,ARUBA-MIB::wlsrOutDoorApMibModules,,,,,,
.1.3.6.1.4.1.14823.2.3.2.1,AP80-PRIVATE-MIB::enterpriseApSys,,,,,,
.1.3.6.1.4.1.14823.2.3.2.1.1,AP80-PRIVATE-MIB::swHardwareVer,OCTET,read-only,,current,,Hardware version of the main board.
.1.3.6.1.4.1.14823.2.3.2.1.2,AP80-PRIVATE-MIB::swBootRomVer,OCTET,read-only,,current,,Boot ROM code version of the main board.
.1.3.6.1.4.1.14823.2.3.2.1.3,AP80-PRIVATE-MIB::swOpCodeVer,OCTET,read-only,,current,,Operation code version of the main board.
.1.3.6.1.4.1.14823.2.3.2.1.4,AP80-PRIVATE-MIB::swSerialNumber,OCTET,read-only,,current,,Serial Number of the Access Point.
.1.3.6.1.4.1.14823.2.3.2.1.5,AP80-PRIVATE-MIB::sysNotificationTree,,,,,,
.1.3.6.1.4.1.14823.2.3.2.1.5.1,AP80-PRIVATE-MIB::sysNotificationObjects,,,,,,
.1.3.6.1.4.1.14823.2.3.2.1.5.2,AP80-PRIVATE-MIB::sysNotifications,,,,,,
.1.3.6.1.4.1.14823.2.3.2.1.5.2.1,AP80-PRIVATE-MIB::sysSystemUp,,,,,,The system up notification shall be sent when the AP 
.1.3.6.1.4.1.14823.2.3.2.1.5.2.2,AP80-PRIVATE-MIB::sysSystemDown,,,,,,The system down notification shall be sent before the AP 
.1.3.6.1.4.1.14823.2.3.2.1.5.2.3,AP80-PRIVATE-MIB::sysRadiusServerChanged,,,,,,The RADIUS server changed notification shall be sent when
.1.3.6.1.4.1.14823.2.3.2.1.5.2.4,AP80-PRIVATE-MIB::sysConfigFileVersionChanged,,,,,,The Config file version changed notification shall be sent when
.1.3.6.1.4.1.14823.2.3.2.2,AP80-PRIVATE-MIB::enterpriseApLineMgnt,,,,,,
.1.3.6.1.4.1.14823.2.3.2.2.1,AP80-PRIVATE-MIB::lineTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each RS-232 line in this system
.1.3.6.1.4.1.14823.2.3.2.2.1.1,AP80-PRIVATE-MIB::lineEntry,,not-accessible,lineIndex,current,,An entry in the table, containing information about configuration in one RS232 line of the Access Point.
.1.3.6.1.4.1.14823.2.3.2.2.1.1.1,AP80-PRIVATE-MIB::lineIndex,Integer32,not-accessible,,current,,This is defined as RS-232 index.
.1.3.6.1.4.1.14823.2.3.2.2.1.1.2,AP80-PRIVATE-MIB::lineDataBits,Integer32,read-only,,current,,This is defined as number of data bits for the RS232 interface.
.1.3.6.1.4.1.14823.2.3.2.2.1.1.3,AP80-PRIVATE-MIB::lineParity,INTEGER,read-only,,current,none(99):odd(1):even(2),This is defined as parity of the RS232 interface.
.1.3.6.1.4.1.14823.2.3.2.2.1.1.4,AP80-PRIVATE-MIB::lineSpeed,Integer32,read-only,,current,,This is defined as the speed of the RS-232 interface.
.1.3.6.1.4.1.14823.2.3.2.2.1.1.5,AP80-PRIVATE-MIB::lineStopBits,Integer32,read-only,,current,,This is defined as the number of stop bits for the RS-232 interface.
.1.3.6.1.4.1.14823.2.3.2.3,AP80-PRIVATE-MIB::enterpriseApPortMgnt,,,,,,
.1.3.6.1.4.1.14823.2.3.2.3.1,AP80-PRIVATE-MIB::portTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
.1.3.6.1.4.1.14823.2.3.2.3.1.1,AP80-PRIVATE-MIB::portEntry,,not-accessible,portIndex,current,,An entry in the table, containing information about configuration in one switch port of the switch.
.1.3.6.1.4.1.14823.2.3.2.3.1.1.1,AP80-PRIVATE-MIB::portIndex,Integer32,not-accessible,,current,,This is defined as ifIndex in the IF-MIB.
.1.3.6.1.4.1.14823.2.3.2.3.1.1.2,AP80-PRIVATE-MIB::portName,OCTET,read-only,,current,,Indicates the port name. This is same as  ifAlias in the IF-MIB (RFC2863 or later).
.1.3.6.1.4.1.14823.2.3.2.3.1.1.3,AP80-PRIVATE-MIB::portType,INTEGER,read-only,,current,other(1):hundredBaseTX(2):hundredBaseFX(3):thousandBaseSX(4):thousandBaseLX(5):thousandBaseT(6):thousandBaseGBIC(7):thousandBaseMiniGBIC(8),Indicates the port type.
.1.3.6.1.4.1.14823.2.3.2.3.1.1.4,AP80-PRIVATE-MIB::portSpeedDpxCfg,INTEGER,read-only,,current,reserved(1):halfDuplex10(2):fullDuplex10(3):halfDuplex100(4):fullDuplex100(5):halfDuplex1000(6):fullDuplex1000(7),Indicates the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
.1.3.6.1.4.1.14823.2.3.2.3.1.1.5,AP80-PRIVATE-MIB::portFlowCtrlCfg,INTEGER,read-only,,current,enabled(1):disabled(2):backPressure(3):dot3xFlowControl(4),(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
.1.3.6.1.4.1.14823.2.3.2.3.1.1.6,AP80-PRIVATE-MIB::portCapabilities,INTEGER,read-only,,current,portCap10half(99):portCap10full(1):portCap100half(2):portCap100full(3):portCap1000half(4):portCap1000full(5):reserved6(6):reserved7(7):reserved8(8):reserved9(9):reserved10(10):reserved11(11):reserved12(12):reserved13(13):portCapSym(14):portCapFlowCtrl(15),Port capabilities.
.1.3.6.1.4.1.14823.2.3.2.3.1.1.7,AP80-PRIVATE-MIB::portAutonegotiation,INTEGER,read-only,,current,enabled(1):disabled(2),Whether autonegotiation is enabled.
.1.3.6.1.4.1.14823.2.3.2.3.1.1.8,AP80-PRIVATE-MIB::portSpeedDpxStatus,INTEGER,read-only,,current,error(1):halfDuplex10(2):fullDuplex10(3):halfDuplex100(4):fullDuplex100(5):halfDuplex1000(6):fullDuplex1000(7),The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
.1.3.6.1.4.1.14823.2.3.2.3.1.1.9,AP80-PRIVATE-MIB::portFlowCtrlStatus,INTEGER,read-only,,current,error(1):backPressure(2):dot3xFlowControl(3):none(4),(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
.1.3.6.1.4.1.14823.2.3.2.4,AP80-PRIVATE-MIB::enterpriseApFileTransferMgt,,,,,,
.1.3.6.1.4.1.14823.2.3.2.4.1,AP80-PRIVATE-MIB::transferType,INTEGER,read-write,,current,ftp(1):tftp(2),Type of file to transfer.
.1.3.6.1.4.1.14823.2.3.2.4.2,AP80-PRIVATE-MIB::fileType,INTEGER,read-write,,current,application(1):config(2):bootcode(3),Type of file to transfer.
.1.3.6.1.4.1.14823.2.3.2.4.3,AP80-PRIVATE-MIB::srcFile,OCTET,read-write,,current,,The source file name for TFTP transfer when a
.1.3.6.1.4.1.14823.2.3.2.4.4,AP80-PRIVATE-MIB::destFile,OCTET,read-write,,current,,The destination file name for TFTP transfer when a
.1.3.6.1.4.1.14823.2.3.2.4.5,AP80-PRIVATE-MIB::fileServer,IpAddress,read-write,,current,,The IP address of the TFTP server for transfer
.1.3.6.1.4.1.14823.2.3.2.4.6,AP80-PRIVATE-MIB::userName,OCTET,read-write,,current,,The username specified for an FTP Transfer.
.1.3.6.1.4.1.14823.2.3.2.4.7,AP80-PRIVATE-MIB::password,OCTET,read-write,,current,,The password specified for an FTP Transfer.
.1.3.6.1.4.1.14823.2.3.2.4.8,AP80-PRIVATE-MIB::status,INTEGER,read-only,,current,running(1):success(2):failureGeneric(3):flashOpenError(10):flashMallocError(11):flashReadError(12):flashFtypeError(13):socketWriteError(20):protocolError(30),The status of the transfer.
.1.3.6.1.4.1.14823.2.3.2.4.9,AP80-PRIVATE-MIB::transferStart,INTEGER,read-write,,current,nothing(0):download(1):upload(2),Set to go(1) to start a transfer.
.1.3.6.1.4.1.14823.2.3.2.5,AP80-PRIVATE-MIB::enterpriseApResetMgt,,,,,,
.1.3.6.1.4.1.14823.2.3.2.5.1,AP80-PRIVATE-MIB::restartOpCodeFile,OCTET,read-write,,current,,Name of op-code file for start-up.
.1.3.6.1.4.1.14823.2.3.2.5.2,AP80-PRIVATE-MIB::restartControl,INTEGER,read-write,,current,running(1):warmBoot(2):coldBoot(3),Setting this object to warmBoot(2) causes the device to
.1.3.6.1.4.1.14823.2.3.2.6,AP80-PRIVATE-MIB::enterpriseApIpMgt,,,,,,
.1.3.6.1.4.1.14823.2.3.2.6.1,AP80-PRIVATE-MIB::netConfigIPAddress,IpAddress,read-write,,current,,The IP address of this Net interface. The default value
.1.3.6.1.4.1.14823.2.3.2.6.2,AP80-PRIVATE-MIB::netConfigSubnetMask,IpAddress,read-write,,current,,The subnet mask of this Net interface. The default value
.1.3.6.1.4.1.14823.2.3.2.6.3,AP80-PRIVATE-MIB::netConfigDefaultGateway,IpAddress,read-write,,current,,The IP Address of the default gateway. If this value is
.1.3.6.1.4.1.14823.2.3.2.6.4,AP80-PRIVATE-MIB::netConfigHttpState,INTEGER,read-write,,current,enabled(1):disabled(2),Whether HTTP is enabled.
.1.3.6.1.4.1.14823.2.3.2.6.5,AP80-PRIVATE-MIB::netConfigHttpPort,INTEGER,read-write,,current,,The port number for HTTP. Default port number is 80.
.1.3.6.1.4.1.14823.2.3.2.6.6,AP80-PRIVATE-MIB::netConfigHttpsState,INTEGER,read-write,,current,enabled(1):disabled(2),Whether Secure HTTP is enabled.
.1.3.6.1.4.1.14823.2.3.2.6.7,AP80-PRIVATE-MIB::netConfigHttpsPort,INTEGER,read-write,,current,,The port number for Secure HTTP. Default port number is 443.
.1.3.6.1.4.1.14823.2.3.2.6.8,AP80-PRIVATE-MIB::netConfigDHCPState,INTEGER,read-write,,current,enabled(1):disabled(2),Whether DHCP is enabled.
.1.3.6.1.4.1.14823.2.3.2.7,AP80-PRIVATE-MIB::enterpriseAPdot11,,,,,,
.1.3.6.1.4.1.14823.2.3.2.7.1,AP80-PRIVATE-MIB::dot11AuthenticationEntry,,,,,,
.1.3.6.1.4.1.14823.2.3.2.7.1.1,AP80-PRIVATE-MIB::dot118021xState,INTEGER,read-write,,obsolete,disabled(0):supported(1):required(2),This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm.
.1.3.6.1.4.1.14823.2.3.2.7.1.2,AP80-PRIVATE-MIB::dot118021xBroadcastKeyRefreshRate,INTEGER,read-write,,obsolete,,The number (in minutes) between changing the broadcast key for 
.1.3.6.1.4.1.14823.2.3.2.7.1.3,AP80-PRIVATE-MIB::dot118021xSessionKeyRefreshRate,INTEGER,read-write,,obsolete,,The number (in minutes) between changing session keys for 
.1.3.6.1.4.1.14823.2.3.2.7.1.4,AP80-PRIVATE-MIB::dot118021xReauthenticationTimeout,INTEGER,read-write,,obsolete,,The number (in minutes) between forcing 802.1x clients to 
.1.3.6.1.4.1.14823.2.3.2.7.1.5,AP80-PRIVATE-MIB::dot11MACAuthenticationType,INTEGER,read-write,,obsolete,disabled(0):local(1):radius(2),This value indicates the type of mac authentication in use.
.1.3.6.1.4.1.14823.2.3.2.7.2,AP80-PRIVATE-MIB::dot11AuthenticationServerTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each authentication server.
.1.3.6.1.4.1.14823.2.3.2.7.2.1,AP80-PRIVATE-MIB::dot11AuthenticationServerEntry,,not-accessible,dot11AuthenticationServerIndex,current,,An entry in the table, containing information about configuration of one authentication server of the AP.
.1.3.6.1.4.1.14823.2.3.2.7.2.1.1,AP80-PRIVATE-MIB::dot11AuthenticationServerIndex,Integer32,not-accessible,,current,,Index of the Authentication Server
.1.3.6.1.4.1.14823.2.3.2.7.2.1.2,AP80-PRIVATE-MIB::dot11AuthenticationServer,IpAddress,read-write,,current,,This value indicates the IP address of the authentication server.
.1.3.6.1.4.1.14823.2.3.2.7.2.1.3,AP80-PRIVATE-MIB::dot11AuthenticationPort,INTEGER,read-write,,current,,This value indicates the UDP Port used by the authentication server.
.1.3.6.1.4.1.14823.2.3.2.7.2.1.4,AP80-PRIVATE-MIB::dot11AuthenticationKey,OCTET,read-write,,current,,This value indicates the shared key used by the authentication server.
.1.3.6.1.4.1.14823.2.3.2.7.2.1.5,AP80-PRIVATE-MIB::dot11AuthenticationRetransmit,INTEGER,read-write,,current,,This value indicates the retransmit timer length used by the  authentication server.
.1.3.6.1.4.1.14823.2.3.2.7.2.1.6,AP80-PRIVATE-MIB::dot11AuthenticationTimeout,INTEGER,read-write,,current,,This value indicates the Timeout value(sec) used by the 
.1.3.6.1.4.1.14823.2.3.2.7.2.1.7,AP80-PRIVATE-MIB::dot11AuthenticationAcctPort,INTEGER,read-write,,current,,The port number for radius server accounting.
.1.3.6.1.4.1.14823.2.3.2.7.2.1.8,AP80-PRIVATE-MIB::dot11AuthenticationAcctInterimUpdate,INTEGER,read-write,,current,,This value indicates the Timeout value(sec) used by the 
.1.3.6.1.4.1.14823.2.3.2.7.2.1.9,AP80-PRIVATE-MIB::dot11AuthenticationMACAddressFormat,INTEGER,read-write,,current,no-delimiter(1):single-dash(2):multi-dash(3):multi-colon(4),This value indicates the MAC address format from Radius  MAC authentication.
.1.3.6.1.4.1.14823.2.3.2.7.2.1.10,AP80-PRIVATE-MIB::dot11AuthenticationVLANIDFormat,INTEGER,read-write,,current,hex(1):ascii(2),This value indicates the VLAN ID format from Radius server.
.1.3.6.1.4.1.14823.2.3.2.7.3,AP80-PRIVATE-MIB::dot11MACAuthenticationFilter,,,,,,
.1.3.6.1.4.1.14823.2.3.2.7.3.1,AP80-PRIVATE-MIB::dot11FilterDefault,INTEGER,read-write,,current,allow(1):deny(2),This value indicates the default access for local mac filters.
.1.3.6.1.4.1.14823.2.3.2.7.3.2,AP80-PRIVATE-MIB::dot11FilterTable,,not-accessible,,current,,Table of status information about each configured MAC Address Filtering Entry.
.1.3.6.1.4.1.14823.2.3.2.7.3.2.1,AP80-PRIVATE-MIB::dot11FilterEntry,,not-accessible,dot11FilterAddress,current,,An entry in the table, containing information about configuration in one radio of the AP.
.1.3.6.1.4.1.14823.2.3.2.7.3.2.1.1,AP80-PRIVATE-MIB::dot11FilterAddress,OCTET,not-accessible,,current,,This value indicates the MAC address of the  filter entry.
.1.3.6.1.4.1.14823.2.3.2.7.3.2.1.2,AP80-PRIVATE-MIB::dot11FilterStatus,INTEGER,read-write,,current,allowed(30):denied(31):delete(32),This value indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the  network from the client.
.1.3.6.1.4.1.14823.2.3.2.7.4,AP80-PRIVATE-MIB::dot11NotificationTree,,,,,,
.1.3.6.1.4.1.14823.2.3.2.7.4.1,AP80-PRIVATE-MIB::dot11NotificationObjects,,,,,,
.1.3.6.1.4.1.14823.2.3.2.7.4.1.1,AP80-PRIVATE-MIB::dot11MacAddr,OCTET,not-accessible,,current,,Mac Address of the affected interface, returned with traps only.
.1.3.6.1.4.1.14823.2.3.2.7.4.1.2,AP80-PRIVATE-MIB::dot11Station,OCTET,not-accessible,,current,,This attribute holds the MAC address of the wireless station
.1.3.6.1.4.1.14823.2.3.2.7.4.1.3,AP80-PRIVATE-MIB::dot11RequestType,INTEGER,not-accessible,,current,unknown(1):association(2):reAssociation(3):authentication(4),This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request
.1.3.6.1.4.1.14823.2.3.2.7.4.1.4,AP80-PRIVATE-MIB::dot11ReasonCode,INTEGER,not-accessible,,current,invalidModeOrState(1):unAuthenticatedStation(2):internalError(3):outOfSequenceFrame(4):unsupportedAlgorithm(5):invalidFrameLngth(6):wepRequiredOnAP(7):wepNotAllowed(8):challengeTextMismatch(9),This attribute defines the reason for the failure of an operation. Value = 1: Invalid mode/state Value = 2: Station not authenticated.
.1.3.6.1.4.1.14823.2.3.2.7.4.1.5,AP80-PRIVATE-MIB::dot11ApIpAddress,IpAddress,not-accessible,,current,,This value indicates the IP address of the Access Point
.1.3.6.1.4.1.14823.2.3.2.7.4.1.6,AP80-PRIVATE-MIB::dot1xAuthenticatorMacAddr,OCTET,not-accessible,,current,,This attribute holds the MAC address of the authenticator for the AP.
.1.3.6.1.4.1.14823.2.3.2.7.4.2,AP80-PRIVATE-MIB::dot11Notifications,,,,,,
.1.3.6.1.4.1.14823.2.3.2.7.4.2.1,AP80-PRIVATE-MIB::dot11StationAssociation,,,,,,The associate notification shall be sent when a station successfully 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.2,AP80-PRIVATE-MIB::dot11StationReAssociation,,,,,,The re-associate notification shall be sent when a station 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.3,AP80-PRIVATE-MIB::dot11StationAuthentication,,,,,,The authentication notification shall be sent when a station 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.4,AP80-PRIVATE-MIB::dot11StationRequestFail,,,,,,The station request fail shall be sent out when a station 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.5,AP80-PRIVATE-MIB::dot11InterfaceBFail,,,,,,The InterfaceBFail notification shall be sent out when 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.6,AP80-PRIVATE-MIB::dot11InterfaceAGFail,,,,,,The InterfaceAGFail notification shall be sent out when 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.7,AP80-PRIVATE-MIB::dot1xMacAddrAuthSuccess,,,,,,The 802.1x MAC address authentication success notification shall 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.8,AP80-PRIVATE-MIB::dot1xMacAddrAuthFail,,,,,,The 802.1x MAC address authentication failure notification shall 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.9,AP80-PRIVATE-MIB::dot1xAuthNotInitiated,,,,,,The 802.1x authentication not initiated notification shall 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.10,AP80-PRIVATE-MIB::dot1xAuthSuccess,,,,,,The 802.1x authentication success notification shall 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.11,AP80-PRIVATE-MIB::dot1xAuthFail,,,,,,The 802.1x authentication failure notification shall 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.12,AP80-PRIVATE-MIB::localMacAddrAuthSuccess,,,,,,The Local MAC address authentication success notification shall 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.13,AP80-PRIVATE-MIB::localMacAddrAuthFail,,,,,,The Local MAC address authentication failure notification shall 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.14,AP80-PRIVATE-MIB::pppLogonFail,,,,,,The PPP Logon failure notification shall be sent out when 
.1.3.6.1.4.1.14823.2.3.2.7.4.2.15,AP80-PRIVATE-MIB::iappStationRoamedFrom,,,,,,The IAPP Station Roamed-From Notification shall be sent out
.1.3.6.1.4.1.14823.2.3.2.7.4.2.16,AP80-PRIVATE-MIB::iappStationRoamedTo,,,,,,The IAPP Station Roamed-To Notification shall be sent out
.1.3.6.1.4.1.14823.2.3.2.7.4.2.17,AP80-PRIVATE-MIB::iappContextDataSent,,,,,,The IAPP Context Data Sent notification shall be sent out
.1.3.6.1.4.1.14823.2.3.2.7.4.2.18,AP80-PRIVATE-MIB::dot1xSupplicantAuthenticated,,,,,,The notification shall be sent when the AP has successfully authenticated 
.1.3.6.1.4.1.14823.2.3.2.7.5,AP80-PRIVATE-MIB::dot11AuthenticationSupplicantTable,,not-accessible,,current,,Table of descriptive and status information about configuration of supplicant
.1.3.6.1.4.1.14823.2.3.2.7.5.1,AP80-PRIVATE-MIB::dot11AuthenticationSupplicantEntry,,not-accessible,dot11AuthenticationSuppIndex,current,,An entry in the table, containing information about configuration of one supplicant.
.1.3.6.1.4.1.14823.2.3.2.7.5.1.1,AP80-PRIVATE-MIB::dot118021xSuppIndex,Integer32,not-accessible,,current,,Index of the interface for which this supplicant is
.1.3.6.1.4.1.14823.2.3.2.7.5.1.2,AP80-PRIVATE-MIB::dot118021xSuppState,INTEGER,read-write,,current,disabled(0):enabled(1),This object is used to enable or disable the 802.1x supplicant.
.1.3.6.1.4.1.14823.2.3.2.7.5.1.3,AP80-PRIVATE-MIB::dot118021xSuppUser,OCTET,read-write,,current,,This value indicates the username for supplicant. If value is
.1.3.6.1.4.1.14823.2.3.2.7.5.1.4,AP80-PRIVATE-MIB::dot118021xSuppPasswd,OCTET,read-write,,current,,This value indicates the password for supplicant. If value is
.1.3.6.1.4.1.14823.2.3.2.7.6,AP80-PRIVATE-MIB::dot11VapAuthenticationTable,,not-accessible,,current,,Table of descriptive and status information about configuration of 8021x for each Vap.
.1.3.6.1.4.1.14823.2.3.2.7.6.1,AP80-PRIVATE-MIB::dot11VapAuthenticationEntry,,not-accessible,dot11Vap8021xIndex,current,,An entry in the table, containing information about configuration of 8021x for each Vap of the AP.
.1.3.6.1.4.1.14823.2.3.2.7.6.1.1,AP80-PRIVATE-MIB::dot11Vap8021xIndex,Integer32,not-accessible,,current,,Index for configuration.
.1.3.6.1.4.1.14823.2.3.2.7.6.1.2,AP80-PRIVATE-MIB::dot11Vap8021xState,INTEGER,read-write,,current,disabled(0):supported(1):required(2),This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm.
.1.3.6.1.4.1.14823.2.3.2.7.6.1.3,AP80-PRIVATE-MIB::dot11Vap8021xBroadcastKeyRefreshRate,INTEGER,read-write,,current,,The number (in minutes) between changing the broadcast key for 
.1.3.6.1.4.1.14823.2.3.2.7.6.1.4,AP80-PRIVATE-MIB::dot11Vap8021xSessionKeyRefreshRate,INTEGER,read-write,,current,,The number (in minutes) between changing session keys for 
.1.3.6.1.4.1.14823.2.3.2.7.6.1.5,AP80-PRIVATE-MIB::dot11Vap8021xReauthenticationTimeout,INTEGER,read-write,,current,,The number (in minutes) between forcing 802.1x clients to 
.1.3.6.1.4.1.14823.2.3.2.7.6.1.6,AP80-PRIVATE-MIB::dot11VapAuthMACAuthenticationType,INTEGER,read-write,,current,disabled(0):local(1):remote(2),This value indicates the type of mac authentication in use.
.1.3.6.1.4.1.14823.2.3.2.7.6.1.7,AP80-PRIVATE-MIB::dot11VapAuthMACAuthenticationTimeout,INTEGER,read-write,,current,,The number (in minutes) between forcing Radius MAC to authenticate.
.1.3.6.1.4.1.14823.2.3.2.8,AP80-PRIVATE-MIB::enterpriseApAdmin,,,,,,
.1.3.6.1.4.1.14823.2.3.2.8.1,AP80-PRIVATE-MIB::enterpriseApAdminUser,OCTET,read-write,,current,,This value indicates the username for management login.
.1.3.6.1.4.1.14823.2.3.2.8.2,AP80-PRIVATE-MIB::enterpriseApAdminPassword,OCTET,read-write,,current,,This value indicates the password for management login. The password length is betwen 3 and 16. 'Zero-length' indicates 'no password'.
.1.3.6.1.4.1.14823.2.3.2.9,AP80-PRIVATE-MIB::enterpriseApVLAN,,,,,,
.1.3.6.1.4.1.14823.2.3.2.9.1,AP80-PRIVATE-MIB::enterpriseApVLANNativeId,INTEGER,read-write,,current,,This value indicates the native VLAN id.
.1.3.6.1.4.1.14823.2.3.2.9.2,AP80-PRIVATE-MIB::enterpriseApVLANState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether VLANs are enabled or disabled.
.1.3.6.1.4.1.14823.2.3.2.9.3,AP80-PRIVATE-MIB::enterpriseApNativeVlanTable,,not-accessible,,mandatory,,Table used to manage the Vlans for each wireless interface.
.1.3.6.1.4.1.14823.2.3.2.9.3.1,AP80-PRIVATE-MIB::enterpriseApNativeVlanEntry,,not-accessible,nativeVlanIfIndex:nativeVlanSsidNumber,mandatory,,An entry in the table, containing information about vlan configuration of one wireless interface.
.1.3.6.1.4.1.14823.2.3.2.9.3.1.1,AP80-PRIVATE-MIB::nativeVlanIfIndex,Integer32,not-accessible,,mandatory,,Interface Index of the wireless interface for which
.1.3.6.1.4.1.14823.2.3.2.9.3.1.2,AP80-PRIVATE-MIB::nativeVlanSsidNumber,Integer32,not-accessible,,mandatory,,Associated Number for Service Set Id (SSID) of the 
.1.3.6.1.4.1.14823.2.3.2.9.3.1.3,AP80-PRIVATE-MIB::nativeVlanVlanId,Integer32,read-write,,mandatory,,This value indicates the native VLAN id of the wireless interface associated
.1.3.6.1.4.1.14823.2.3.2.10,AP80-PRIVATE-MIB::enterpriseApFilterControl,,,,,,
.1.3.6.1.4.1.14823.2.3.2.10.1,AP80-PRIVATE-MIB::enterpriseApFilterControlInterClientSTAsCommun,INTEGER,read-write,,current,disabled(1):PreventIntraVAPClient(2):PreventInterAndIntraVAPClient(3),This value indicates the Inter Client STAs Communication Filter setting. disabled (1) To disable the Inter Client STAs Communication Filter PreventIntraVAPClient (2) To set filter to prevent intra VAP client communication PreventInterAndIntraVAPClient(3) To set filter to prevent inter and intra VAP client communication
.1.3.6.1.4.1.14823.2.3.2.10.2,AP80-PRIVATE-MIB::enterpriseApFilterControlAPManage,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates the AP management filter setting.
.1.3.6.1.4.1.14823.2.3.2.10.3,AP80-PRIVATE-MIB::enterpriseApFilterControlEthernet,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates the ethernet filter setting.
.1.3.6.1.4.1.14823.2.3.2.10.4,AP80-PRIVATE-MIB::enterpriseApFilterProtocolTable,,not-accessible,,current,,Table of descriptive and status information about configuration of the filter protocol table.
.1.3.6.1.4.1.14823.2.3.2.10.4.1,AP80-PRIVATE-MIB::enterpriseApFilterProtocolEntry,,not-accessible,enterpriseApFilterProtocolIndex,current,,An entry in the filter protocol table, containing information about configuration of one filter table entry.
.1.3.6.1.4.1.14823.2.3.2.10.4.1.1,AP80-PRIVATE-MIB::enterpriseApFilterProtocolIndex,Integer32,not-accessible,,current,,Index of the Protocol Filters.
.1.3.6.1.4.1.14823.2.3.2.10.4.1.2,AP80-PRIVATE-MIB::enterpriseApFilterProtocolName,OCTET,read-only,,current,,This value indicates the name of the protocol filter. One of 
.1.3.6.1.4.1.14823.2.3.2.10.4.1.3,AP80-PRIVATE-MIB::enterpriseApFilterProtocolISODesignator,OCTET,read-only,,current,,This value indicates the name of the protocol filter.
.1.3.6.1.4.1.14823.2.3.2.10.4.1.4,AP80-PRIVATE-MIB::enterpriseApFilterProtocolState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the protocol filter is enabled.
.1.3.6.1.4.1.14823.2.3.2.10.5,AP80-PRIVATE-MIB::enterpriseApFilterUplinkPortMACAddrFilter,,,,,,
.1.3.6.1.4.1.14823.2.3.2.10.5.1,AP80-PRIVATE-MIB::uplinkPortMACAddrFilterStatus,INTEGER,read-write,,current,enable(1):disabled(2),This value indicates whether the Uplink Port MAC Address Filter Table is enabled or not.
.1.3.6.1.4.1.14823.2.3.2.10.5.2,AP80-PRIVATE-MIB::uplinkPortMACAddrFilterAddMac,OCTET,read-write,,current,,To add mac address to Uplink Port MAC Address Filter Table. (Mac Address format: xx-xx-xx-xx-xx-xx or xx:xx:xx:xx:xx:xx)
.1.3.6.1.4.1.14823.2.3.2.10.5.3,AP80-PRIVATE-MIB::uplinkPortMACAddrFilteringTable,,not-accessible,,current,,Table of descriptive and status information about configuration of the Uplink Port MAC Address Filter Table. 
.1.3.6.1.4.1.14823.2.3.2.10.5.3.1,AP80-PRIVATE-MIB::uplinkPortMACAddrFilteringEntry,,not-accessible,uplinkPortMacAddrIndex,current,,An entry in Uplink Port MAC Address Filter Table.
.1.3.6.1.4.1.14823.2.3.2.10.5.3.1.1,AP80-PRIVATE-MIB::uplinkPortMacAddrIndex,Integer32,read-only,,current,,The index for Uplink Port MAC Address Filter Table.
.1.3.6.1.4.1.14823.2.3.2.10.5.3.1.2,AP80-PRIVATE-MIB::uplinkPortMACAddr,OCTET,read-only,,current,,The MAC Address of wireless clients which allowed to communicate on subnet.
.1.3.6.1.4.1.14823.2.3.2.10.5.3.1.3,AP80-PRIVATE-MIB::deleteMacAddr,INTEGER,read-write,,current,Delete(1):Nothing(2),To delete the MAC Address from Uplink Port MAC Address Filter Table. Delete(1) To start delete MAC address. Nothing(2) Nothing occur.
.1.3.6.1.4.1.14823.2.3.2.11,AP80-PRIVATE-MIB::enterpriseApSNTP,,,,,,
.1.3.6.1.4.1.14823.2.3.2.11.1,AP80-PRIVATE-MIB::enterpriseApSNTPState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether SNTP is enabled or not. At least one of the 
.1.3.6.1.4.1.14823.2.3.2.11.2,AP80-PRIVATE-MIB::enterpriseApSNTPPrimaryServer,IpAddress,read-write,,current,,This value indicates the IP address of the primary SNTP server.
.1.3.6.1.4.1.14823.2.3.2.11.3,AP80-PRIVATE-MIB::enterpriseApSNTPSecondaryServer,IpAddress,read-write,,current,,This value indicates the IP address of the secondary SNTP server.
.1.3.6.1.4.1.14823.2.3.2.11.4,AP80-PRIVATE-MIB::enterpriseApSNTPTimezone,INTEGER,read-write,,current,enewetakKwajalein(0):midwayIsland(1):hawaii(2):alaska(3):pacific(4):arizona(5):mountain(6):central(7):mexicoCity(8):saskatchewan(9):bogota(10):eastern(11):indiana(12):atlantic(13):caracas(14):santiago(15):newfoundland(16):brasilia(17):buenos(18):midAtlantic(19):azores(20):casablanca(21):greenwichMeanTimeDublin(22):greenwichMeanTimeLisbon(23):amsterdam(24):stockhoim(25):bratislava(26):prague(27):paris(28):sofija(29):athens(30):bucharest(31):cairo(32):harare(33):helsinki(34):israel(35):baghdad(36):moscow(37):tehran(38):abuDhabi(39):vogograd(40):islamabad(41):almaty(42):bangkok(43):beijing(44):taipei(45):tokyo(46):brisbane(47):canberra(48):guam(49):hobart(50):magadan(51):fiji(52):wellington(53),This value indicates which timezone to use.
.1.3.6.1.4.1.14823.2.3.2.11.5,AP80-PRIVATE-MIB::enterpriseApSNTPDST,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether Daylight Savings Time is enabled or not.
.1.3.6.1.4.1.14823.2.3.2.11.6,AP80-PRIVATE-MIB::enterpriseApSNTPDSTStartMonth,INTEGER,read-write,,current,,This value indicates the starting month for Daylight Savings Time.
.1.3.6.1.4.1.14823.2.3.2.11.7,AP80-PRIVATE-MIB::enterpriseApSNTPDSTStartDay,INTEGER,read-write,,current,,This value indicates the starting day for Daylight Savings Time.
.1.3.6.1.4.1.14823.2.3.2.11.8,AP80-PRIVATE-MIB::enterpriseApSNTPDSTEndMonth,INTEGER,read-write,,current,,This value indicates the ending month for Daylight Savings Time.
.1.3.6.1.4.1.14823.2.3.2.11.9,AP80-PRIVATE-MIB::enterpriseApSNTPDSTEndDay,INTEGER,read-write,,current,,This value indicates the ending day for Daylight Savings Time.
.1.3.6.1.4.1.14823.2.3.2.11.10,AP80-PRIVATE-MIB::sntpNotificationTree,,,,,,
.1.3.6.1.4.1.14823.2.3.2.11.10.1,AP80-PRIVATE-MIB::sntpNotificationObjects,,,,,,
.1.3.6.1.4.1.14823.2.3.2.11.10.2,AP80-PRIVATE-MIB::sntpNotifications,,,,,,
.1.3.6.1.4.1.14823.2.3.2.11.10.2.1,AP80-PRIVATE-MIB::sntpServerFail,,,,,,The sntpServerFail notification shall be sent when the AP 
.1.3.6.1.4.1.14823.2.3.2.12,AP80-PRIVATE-MIB::enterpriseApDNS,,,,,,
.1.3.6.1.4.1.14823.2.3.2.12.1,AP80-PRIVATE-MIB::enterpriseApDNSPrimaryServer,IpAddress,read-write,,current,,This value indicates the IP address of the primary DNS server.
.1.3.6.1.4.1.14823.2.3.2.12.2,AP80-PRIVATE-MIB::enterpriseApDNSSecondaryServer,IpAddress,read-write,,current,,This value indicates the IP address of the secondary DNS server.
.1.3.6.1.4.1.14823.2.3.2.13,AP80-PRIVATE-MIB::enterpriseApSyslog,,,,,,
.1.3.6.1.4.1.14823.2.3.2.13.1,AP80-PRIVATE-MIB::enterpriseApSyslogState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether syslog is enabled.
.1.3.6.1.4.1.14823.2.3.2.13.2,AP80-PRIVATE-MIB::enterpriseApSyslogConsoleState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether syslog console logging is enabled.
.1.3.6.1.4.1.14823.2.3.2.13.3,AP80-PRIVATE-MIB::enterpriseApSyslogLevel,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7),This value indicates the syslog logging level.
.1.3.6.1.4.1.14823.2.3.2.13.4,AP80-PRIVATE-MIB::enterpriseApSyslogServerTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each syslog server.
.1.3.6.1.4.1.14823.2.3.2.13.4.1,AP80-PRIVATE-MIB::enterpriseApSyslogServerEntry,,not-accessible,enterpriseApSyslogServerIndex,current,,An entry in the table, containing information about configuration of one syslog server of the AP.
.1.3.6.1.4.1.14823.2.3.2.13.4.1.1,AP80-PRIVATE-MIB::enterpriseApSyslogServerIndex,Integer32,not-accessible,,current,,Index of the Syslog Server
.1.3.6.1.4.1.14823.2.3.2.13.4.1.2,AP80-PRIVATE-MIB::enterpriseApSyslogServerState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the syslog server is enabled.
.1.3.6.1.4.1.14823.2.3.2.13.4.1.3,AP80-PRIVATE-MIB::enterpriseApSyslogServerIPAddress,IpAddress,read-write,,current,,This value indicates the IP address of the syslog server.
.1.3.6.1.4.1.14823.2.3.2.13.4.1.4,AP80-PRIVATE-MIB::enterpriseApSyslogServerPort,INTEGER,read-write,,current,,This value indicates the UDP Port used by the syslog server.
.1.3.6.1.4.1.14823.2.3.2.14,AP80-PRIVATE-MIB::enterpriseApSecurity,,,,,,
.1.3.6.1.4.1.14823.2.3.2.14.1,AP80-PRIVATE-MIB::enterpriseApSecurityTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each radio in terms of security settings.
.1.3.6.1.4.1.14823.2.3.2.14.1.1,AP80-PRIVATE-MIB::enterpriseApSecurityEntry,,not-accessible,enterpriseApSecurityIndex,current,,An entry in the table, containing information about configuration of one radio of the AP.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.1,AP80-PRIVATE-MIB::enterpriseApSecurityIndex,Integer32,not-accessible,,current,,Radio Index for security settings.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.2,AP80-PRIVATE-MIB::enterpriseApSecurityAuthType,INTEGER,read-write,,current,opensystem(0):sharedkey(1):wpa(2):wpapsk(3):wpawpa2mixed(4):wpawpa2pskmixed(5):wpa2(6):wpa2psk(7),This value indicates the type of authentication in use for this radio interface. 
.1.3.6.1.4.1.14823.2.3.2.14.1.1.3,AP80-PRIVATE-MIB::enterpriseApSecuritySharedKeyLen,INTEGER,read-only,,current,none(0):sixtyFour(1):oneHundredTwentyEight(2):oneHundredFiftyTwo(3),This value indicates the shared key length for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.4,AP80-PRIVATE-MIB::enterpriseApSecurityWPAMode,INTEGER,read-write,,current,supported(0):required(1):disabled(2),This value indicates the state of WPA for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.5,AP80-PRIVATE-MIB::enterpriseApSecurityWPAKeyType,INTEGER,read-write,,current,dot1x(0):presharedkey(1),This value indicates the type of WPA Key Management in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.6,AP80-PRIVATE-MIB::enterpriseApSecurityWPACipher,INTEGER,read-write,,obsolete,wep(0):tkip(1):aes(2),This value indicates the type of WPA Cipher in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.7,AP80-PRIVATE-MIB::enterpriseApSecurityWPAPSKType,INTEGER,read-write,,current,hex(0):alphanumeric(1),This value indicates the type of WPA Pre Shared Key in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.8,AP80-PRIVATE-MIB::enterpriseApSecurityWPAPSK,OCTET,read-write,,current,,This value indicates WPA Pre Shared Key in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.9,AP80-PRIVATE-MIB::enterpriseApSecurityWEPKeyType,INTEGER,read-write,,current,hexadecimal(0):alphanumeric(1),This value indicates the type of WEP Key in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.10,AP80-PRIVATE-MIB::enterpriseApSecurityWEPEnabled,INTEGER,read-write,,current,false(2):true(1),This value indicates whether WEP is enabled.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.11,AP80-PRIVATE-MIB::enterpriseApSecurityWPACipherSuite,INTEGER,read-write,,current,aes-ccmp(0):tkip(1):wep(2),This value indicates the type of WPA Cipher Suite in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.12,AP80-PRIVATE-MIB::enterpriseApSecurityWPAPreAuthentication,INTEGER,read-write,,current,enabled(1):disabled(2),Whether Pre-Authentication is enabled.
.1.3.6.1.4.1.14823.2.3.2.14.1.1.13,AP80-PRIVATE-MIB::enterpriseApSecurityWPAPmksaLifetime,INTEGER,read-write,,current,,The number (in minutes) for Pmksa-Lifetime.
.1.3.6.1.4.1.14823.2.3.2.14.2,AP80-PRIVATE-MIB::enterpriseApSsh,,,,,,
.1.3.6.1.4.1.14823.2.3.2.14.2.1,AP80-PRIVATE-MIB::enterpriseApSshServerEnabled,INTEGER,read-write,,mandatory,false(2):true(1),This value indicates whether SSH server is enabled.
.1.3.6.1.4.1.14823.2.3.2.14.2.2,AP80-PRIVATE-MIB::enterpriseApSshServerPort,Integer32,read-write,,mandatory,,This value indicates SSH server's port number.
.1.3.6.1.4.1.14823.2.3.2.14.2.3,AP80-PRIVATE-MIB::enterpriseApSshTelnetServerEnabled,INTEGER,read-write,,mandatory,false(2):true(1),This value indicates whether telnet server is enabled.
.1.3.6.1.4.1.14823.2.3.2.15,AP80-PRIVATE-MIB::enterpriseApRadio,,,,,,
.1.3.6.1.4.1.14823.2.3.2.15.1,AP80-PRIVATE-MIB::enterpriseApRadioTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each radio.
.1.3.6.1.4.1.14823.2.3.2.15.1.1,AP80-PRIVATE-MIB::enterpriseApRadioEntry,,not-accessible,enterpriseApRadioIndex,current,,An entry in the table, containing information about configuration of one radio of the AP.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.1,AP80-PRIVATE-MIB::enterpriseApRadioIndex,Integer32,not-accessible,,current,,Radio Index for configuration.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.2,AP80-PRIVATE-MIB::enterpriseApRadioState,INTEGER,read-write,,obsolete,enabled(1):disabled(2),This value indicates the state of the radio interface.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.3,AP80-PRIVATE-MIB::enterpriseApRadioAutoChannel,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether auto channel selection is enabled or not
.1.3.6.1.4.1.14823.2.3.2.15.1.1.4,AP80-PRIVATE-MIB::enterpriseApRadioTransmitPower,INTEGER,read-write,,current,min(0):eighth(1):quarter(2):half(3):full(4),This value indicates the transmit power for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.5,AP80-PRIVATE-MIB::enterpriseApRadioClosedSystem,INTEGER,read-write,,obsolete,enabled(1):disabled(2),This value indicates whether closed system is enabled for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.6,AP80-PRIVATE-MIB::enterpriseApRadioMaxAssoc,INTEGER,read-write,,obsolete,,This value indicates the max number of clients allowed on this radio interface.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.7,AP80-PRIVATE-MIB::enterpriseApRadioTransmitKey,INTEGER,read-write,,obsolete,,This value indicates default transmit key in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.8,AP80-PRIVATE-MIB::enterpriseApRadioTurboMode,INTEGER,read-write,,current,disabled(1):static-turbo(2):dynamic-turbo(3),This value indicates whether turbo mode is enabled for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.9,AP80-PRIVATE-MIB::enterpriseApRadioDescription,OCTET,read-write,,obsolete,,This value indicates the description for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.10,AP80-PRIVATE-MIB::enterpriseApRadioDataRate,INTEGER,read-write,,current,oneMbps(1):twoMbps(2):fiveAndHalfMbps(5):sixMbps(6):nineMbps(9):elevenMbps(11):twelveMbps(12):eighteenMbps(18):twentyFourMbps(24):thirtySixMbps(36):fourtyEightMbps(48):fiftyFourMbps(54):auto(255),This value indicates the data rate for this radio interface. Radio interface G operates all listed data rates. The auto
.1.3.6.1.4.1.14823.2.3.2.15.1.1.11,AP80-PRIVATE-MIB::enterpriseApRadioGMode,INTEGER,read-write,,current,bOnly(1):gOnly(2):bg(3),This value indicates the radio mode for the 802.11g radio.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.12,AP80-PRIVATE-MIB::enterpriseApRadioAntennaMode,INTEGER,read-write,,mandatory,fixed(1):external(2),This value indicates the antenna mode in use for the G-radio. 
.1.3.6.1.4.1.14823.2.3.2.15.1.1.13,AP80-PRIVATE-MIB::enterpriseApRadioAntennaId,OCTET,read-only,,current,, 
.1.3.6.1.4.1.14823.2.3.2.15.1.1.14,AP80-PRIVATE-MIB::enterpriseApRadioAntennaControlMethod,INTEGER,read-write,,current,Diversity(1):Left(2):Right(3),This value indicates the antenna control method for the radio index. Diversity(1) AP select the antenna automatically. Left (2) Use the left antenna. Right (3) Use the right antenna.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.15,AP80-PRIVATE-MIB::enterpriseApRadioAntennaLocation,INTEGER,read-write,,current,Indoor(1):Outdoor(2),This value indicates the location of antenna for each radio index.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.16,AP80-PRIVATE-MIB::enterpriseApRadioRogueApDetection,INTEGER,read-write,,current,enabled(1):disabled(2),The status of Rogue AP detection for each index. enabled(1) To set rogue Ap detection enabled. disabled(2) To set rogue Ap detection disabled.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.17,AP80-PRIVATE-MIB::enterpriseApRadioRogueApScanInterval,Integer32,read-write,,current,,This value indicates the interval between each rogue AP scan.(unit: minutes)
.1.3.6.1.4.1.14823.2.3.2.15.1.1.18,AP80-PRIVATE-MIB::enterpriseApRadioRogueApScanDuration,Integer32,read-write,,current,,This value indicates the rogue AP scan duratoin.(unit: minutes)
.1.3.6.1.4.1.14823.2.3.2.15.1.1.19,AP80-PRIVATE-MIB::enterpriseApRadioRogueApScanNow,INTEGER,read-write,,current,enabled(1):disabled(2),To force Ap to do rogue AP scan right away. enabled(1) To do Rogue AP scan right now. disabled(2) To set rogue Ap.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.21,AP80-PRIVATE-MIB::enterpriseApRadioMICMode,INTEGER,read-write,,current,software(1):hardware(2),This value indicates the MIC mode status for this radio index. software(1) To set MIC mode to software. hardware(2) To set MIC mode to hardware.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.22,AP80-PRIVATE-MIB::enterpriseApRadioSuperMode,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates the super mode status for this radio index. enabled (1) To set super mode enabled. disabled(2) To set super mode disabled.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.23,AP80-PRIVATE-MIB::enterpriseApRadioBeaconInterval,Integer32,read-write,,current,,This value indicates the beacon interval for this radio index.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.24,AP80-PRIVATE-MIB::enterpriseApRadioDataBeaconRate,Integer32,read-write,,current,,This value indicates the data beacon rate for the radio index.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.25,AP80-PRIVATE-MIB::enterpriseApRadioChannel,Integer32,read-write,,current,,This valud indicates the radio channel for the radio index. set channel 42/50/58/152/160 for static turbo mode, set channel 40/48/56/153/161 for dynamic turbo mode, set channel 36/40/44/48/52/56/60/64/149/153/157/161/165 when turbo mode is disabled. The value '0' indicates the radio interface cannot be enable in current country code.
.1.3.6.1.4.1.14823.2.3.2.15.1.1.26,AP80-PRIVATE-MIB::enterpriseApRadioFragmentLength,Integer32,read-write,,current,,This value indicates the fragment length for the radio index.(unit: Byte)
.1.3.6.1.4.1.14823.2.3.2.15.1.1.27,AP80-PRIVATE-MIB::enterpriseApRadioRTSThreshold,Integer32,read-write,,current,,This value indicates the RTS Threshold for the radio index.(unit: Byte)
.1.3.6.1.4.1.14823.2.3.2.15.1.1.28,AP80-PRIVATE-MIB::enterpriseApRadioAntennaGainReduction,Integer32,read-write,,current,,This value indicates the antenna gain reduction for the radio index.(unit: dB)
.1.3.6.1.4.1.14823.2.3.2.16,AP80-PRIVATE-MIB::enterpriseApSNMP,,,,,,
.1.3.6.1.4.1.14823.2.3.2.16.1,AP80-PRIVATE-MIB::enterpriseApSNMPCommunityReadOnly,OCTET,read-write,,current,,The SNMP Read Only Community. The value if read,
.1.3.6.1.4.1.14823.2.3.2.16.2,AP80-PRIVATE-MIB::enterpriseApSNMPCommunityReadWrite,OCTET,read-write,,current,,The SNMP Read Write Community. The value if read,
.1.3.6.1.4.1.14823.2.3.2.16.3,AP80-PRIVATE-MIB::enterpriseApSNMPTrapDestinationTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each trap receiving server.
.1.3.6.1.4.1.14823.2.3.2.16.3.1,AP80-PRIVATE-MIB::enterpriseApSNMPTrapDestinationEntry,,not-accessible,enterpriseApSNMPTrapDestinationIndex,current,,An entry in the table, containing information about configuration of one trap receiving server.
.1.3.6.1.4.1.14823.2.3.2.16.3.1.1,AP80-PRIVATE-MIB::enterpriseApSNMPTrapDestinationIndex,INTEGER,not-accessible,,current,,Index of the Trap Destination Table.
.1.3.6.1.4.1.14823.2.3.2.16.3.1.2,AP80-PRIVATE-MIB::enterpriseApSNMPTrapDestinationCommunity,OCTET,read-write,,current,,The SNMP Trap Community
.1.3.6.1.4.1.14823.2.3.2.16.3.1.3,AP80-PRIVATE-MIB::enterpriseApSNMPTrapDestinationIP,IpAddress,read-write,,current,,The IP address of the trap receiving server.
.1.3.6.1.4.1.14823.2.3.2.16.3.1.4,AP80-PRIVATE-MIB::enterpriseApSNMPTrapDestinationState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the trap receiving server is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4,AP80-PRIVATE-MIB::enterpriseApSNMPTrapFilters,,,,,,
.1.3.6.1.4.1.14823.2.3.2.16.4.1,AP80-PRIVATE-MIB::sysSystemUpTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the sysSystemUp trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.2,AP80-PRIVATE-MIB::sysSystemDownTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the sysSystemDowntrap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.3,AP80-PRIVATE-MIB::sysRadiusServerChangedTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the sysRadiusServerChanged trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.4,AP80-PRIVATE-MIB::sysConfigFileVersionChangedTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the sysConfigFileVersionChanged trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.5,AP80-PRIVATE-MIB::dot11StationAssociationTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11StationAssociation trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.6,AP80-PRIVATE-MIB::dot11StationReAssociationTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11StationReAssociation trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.7,AP80-PRIVATE-MIB::dot11StationAuthenticationTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11StationAuthentication trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.8,AP80-PRIVATE-MIB::dot11StationRequestFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11StationRequestFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.9,AP80-PRIVATE-MIB::dot11InterfaceBFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11InterfaceBFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.10,AP80-PRIVATE-MIB::dot11InterfaceAGFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11InterfaceAGFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.11,AP80-PRIVATE-MIB::dot1xMacAddrAuthSuccessTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot1xMacAddrAuthSuccess trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.12,AP80-PRIVATE-MIB::dot1xMacAddrAuthFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot1xMacAddrAuthFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.13,AP80-PRIVATE-MIB::dot1xAuthNotInitiatedTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot1xAuthNotInitiated trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.14,AP80-PRIVATE-MIB::dot1xAuthSuccessTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot1xAuthSuccess trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.15,AP80-PRIVATE-MIB::dot1xAuthFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot1xAuthFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.16,AP80-PRIVATE-MIB::localMacAddrAuthSuccessTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the localMacAddrAuthSuccess trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.17,AP80-PRIVATE-MIB::localMacAddrAuthFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the localMacAddrAuthFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.18,AP80-PRIVATE-MIB::pppLogonFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the pppLogonFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.19,AP80-PRIVATE-MIB::iappStationRoamedFromTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the iappStationRoamedFrom trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.20,AP80-PRIVATE-MIB::iappStationRoamedToTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the iappStationRoamedTo trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.21,AP80-PRIVATE-MIB::iappContextDataSentTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the iappContextDataSent trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.22,AP80-PRIVATE-MIB::sntpServerFailTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the sntpServerFail trap is enabled.
.1.3.6.1.4.1.14823.2.3.2.16.4.23,AP80-PRIVATE-MIB::dot1xSuppAuthenticatedTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot1xSupplicantAuthenticated 
.1.3.6.1.4.1.14823.2.3.2.16.4.24,AP80-PRIVATE-MIB::dot11FailedTransmitsTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11FailedTransmitsTrapEnabled 
.1.3.6.1.4.1.14823.2.3.2.16.4.25,AP80-PRIVATE-MIB::dot11AckFailuresTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11AckFailuresTrapEnabled 
.1.3.6.1.4.1.14823.2.3.2.16.4.26,AP80-PRIVATE-MIB::dot11FcsErrorsTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the dot11FcsErrorsTrapEnabled 
.1.3.6.1.4.1.14823.2.3.2.16.4.27,AP80-PRIVATE-MIB::rogueAPDetectedTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the RogueAPDetectedTrapEnabled 
.1.3.6.1.4.1.14823.2.3.2.16.4.28,AP80-PRIVATE-MIB::possibleRogueAPDetectedTrapEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether the RogueAPDetectedTrapEnabled 
.1.3.6.1.4.1.14823.2.3.2.17,AP80-PRIVATE-MIB::enterpriseApSession,,,,,,
.1.3.6.1.4.1.14823.2.3.2.17.1,AP80-PRIVATE-MIB::enterpriseApSessionTable,,not-accessible,,current,,This table list all sessions (wireless stations) status
.1.3.6.1.4.1.14823.2.3.2.17.1.1,AP80-PRIVATE-MIB::enterpriseApSessionEntry,,not-accessible,enterpriseApSessionIfIndex:enterpriseApSessionStationAddres,current,,An entry in the table, containing information
.1.3.6.1.4.1.14823.2.3.2.17.1.1.1,AP80-PRIVATE-MIB::enterpriseApSessionIfIndex,Integer32,not-accessible,,current,,Interface index for the radio this session is associated
.1.3.6.1.4.1.14823.2.3.2.17.1.1.2,AP80-PRIVATE-MIB::enterpriseApSessionStationAddres,OCTET,not-accessible,,current,,The unique MAC Address of the station for this session.
.1.3.6.1.4.1.14823.2.3.2.17.1.1.3,AP80-PRIVATE-MIB::enterpriseApSessionAuthenticated,INTEGER,read-only,,current,false(2):true(1),Whether the session is authenticated or not.
.1.3.6.1.4.1.14823.2.3.2.17.1.1.4,AP80-PRIVATE-MIB::enterpriseApSessionAssociated,INTEGER,read-only,,current,false(2):true(1),Whether the session is associated or not. It is rare case that 
.1.3.6.1.4.1.14823.2.3.2.17.1.1.5,AP80-PRIVATE-MIB::enterpriseApSessionIsForwarding,INTEGER,read-only,,current,false(2):true(1),Whether the AP is forwarding the client station traffic (higher level authentication)
.1.3.6.1.4.1.14823.2.3.2.17.1.1.6,AP80-PRIVATE-MIB::enterpriseApSessionKeyType,INTEGER,read-only,,current,none(1):staticWep(2):dynamicWep(3):wpaWep(4):wpaTkip(5):wpaAes(6),The encryption key type used by the station. Note that wpa-wep is not supported
.1.3.6.1.4.1.14823.2.3.2.17.1.1.7,AP80-PRIVATE-MIB::enterpriseApSessionAssociationId,Integer32,read-only,,current,,The internal association identify number
.1.3.6.1.4.1.14823.2.3.2.17.1.1.8,AP80-PRIVATE-MIB::enterpriseApSessionLastAuthenticatedTime,TimeTicks,read-only,,current,,This is the time in hundredths of a second last time the client
.1.3.6.1.4.1.14823.2.3.2.17.1.1.9,AP80-PRIVATE-MIB::enterpriseApSessionAssociatedTime,TimeTicks,read-only,,current,,This is the time in hundredths of a second since the client 
.1.3.6.1.4.1.14823.2.3.2.17.1.1.10,AP80-PRIVATE-MIB::enterpriseApSessionLastAssociatedTime,TimeTicks,read-only,,current,,This is the time in hundredths of a second when the client 
.1.3.6.1.4.1.14823.2.3.2.17.1.1.11,AP80-PRIVATE-MIB::enterpriseApSessionLastDisassociatedTime,TimeTicks,read-only,,current,,This is the time in hundredths of a second when the client 
.1.3.6.1.4.1.14823.2.3.2.17.1.1.12,AP80-PRIVATE-MIB::enterpriseApSessionTxPacketCount,Counter32,read-only,,current,,This is the number of packets transmitted from the client to the AP. It includes  data, control and management packets.
.1.3.6.1.4.1.14823.2.3.2.17.1.1.13,AP80-PRIVATE-MIB::enterpriseApSessionRxPacketCount,Counter32,read-only,,current,,This is the number of unicast packets transmitted from the AP to the client.  It includes data, control and management packets.
.1.3.6.1.4.1.14823.2.3.2.17.1.1.14,AP80-PRIVATE-MIB::enterpriseApSessionTxByteCount,Counter32,read-only,,current,,This is the number of bytes transmitted from the client to the AP. It  includes the bytes of data, control and management packets.
.1.3.6.1.4.1.14823.2.3.2.17.1.1.15,AP80-PRIVATE-MIB::enterpriseApSessionRxByteCount,Counter32,read-only,,current,,This is the number of unicast bytes transmitted from the AP to  the client. It includes the bytes of data, control and management  packets.
.1.3.6.1.4.1.14823.2.3.2.20,AP80-PRIVATE-MIB::enterpriseAPVapRadio,,,,,,
.1.3.6.1.4.1.14823.2.3.2.20.1,AP80-PRIVATE-MIB::enterpriseAPVapRadioTable,,not-accessible,,current,,Table of descriptive and status information about configuration of each radio.
.1.3.6.1.4.1.14823.2.3.2.20.1.1,AP80-PRIVATE-MIB::enterpriseAPVapRadioEntry,,not-accessible,enterpriseAPVapRadioIndex,current,,An entry in the table, containing information about configuration of one radio of the AP.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.1,AP80-PRIVATE-MIB::enterpriseAPVapRadioIndex,Integer32,not-accessible,,current,,Radio Index for configuration.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.2,AP80-PRIVATE-MIB::enterpriseAPVapRadioState,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates the state of the radio interface.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.3,AP80-PRIVATE-MIB::enterpriseAPVapRadioClosedSystem,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates whether closed system is enabled for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.4,AP80-PRIVATE-MIB::enterpriseAPVapRadioMaxAssoc,INTEGER,read-write,,current,,This value indicates the max number of clients allowed on this radio interface.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.5,AP80-PRIVATE-MIB::enterpriseAPVapRadioTransmitKey,INTEGER,read-write,,current,,This value indicates default transmit key in use for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.6,AP80-PRIVATE-MIB::enterpriseAPVapRadioDescription,OCTET,read-write,,current,,This value indicates the description for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.8,AP80-PRIVATE-MIB::enterpriseAPVapRadioAuthTimeoutInterval,Integer32,read-write,,current,,This value indicates the Authentication Timeout interval for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.9,AP80-PRIVATE-MIB::enterpriseAPVapRadioAssocTimeoutInterval,Integer32,read-write,,current,,This value indicates the Association Timeout interval for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.20.1.1.10,AP80-PRIVATE-MIB::enterpriseAPVapRadioWPA2PMKSALifeTime,Integer32,read-write,,current,,This value indicates the WPA2 PMSA Life Time for this radio interface.
.1.3.6.1.4.1.14823.2.3.2.22,AP80-PRIVATE-MIB::enterpriseApRadioWds,,,,,,
.1.3.6.1.4.1.14823.2.3.2.22.1,AP80-PRIVATE-MIB::enterpriseApRadioWdsTable,,not-accessible,,current,,Table of configuration information for Wds for each
.1.3.6.1.4.1.14823.2.3.2.22.1.1,AP80-PRIVATE-MIB::enterpriseApRadioWdsEntry,,not-accessible,enterpriseApRadioIndex,current,,An entry in the table, containing information about configuration of peer Bridging
.1.3.6.1.4.1.14823.2.3.2.22.1.1.1,AP80-PRIVATE-MIB::wdsApRole,INTEGER,read-write,,current,roleAp(1):roleBridgeMaster(2):roleBridge(4),This value indicates the role of the Ap for this radio,  roleAp(1): AP operation.
.1.3.6.1.4.1.14823.2.3.2.22.1.1.3,AP80-PRIVATE-MIB::wdsChannelAutoSync,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates the states of channel auto synchronize for this radio.
.1.3.6.1.4.1.14823.2.3.2.22.1.1.4,AP80-PRIVATE-MIB::wdsMasterSlaveMode,INTEGER,read-write,,current,master(1):slave(2),This value indicates the Master/Slave mode for this radio. master (1) To set to master mode. slave (2) To set to slave mode.
.1.3.6.1.4.1.14823.2.3.2.22.2,AP80-PRIVATE-MIB::enterpriseApRadioWdsPeerTable,,not-accessible,,current,,Table of configuration information for Wds Peers for each
.1.3.6.1.4.1.14823.2.3.2.22.2.1,AP80-PRIVATE-MIB::enterpriseApRadioWdsPeerEntry,,not-accessible,enterpriseApRadioIndex:wdsPeerIndex,current,,An entry in the table, containing information about configuration of peer Bridging
.1.3.6.1.4.1.14823.2.3.2.22.2.1.1,AP80-PRIVATE-MIB::wdsPeerIndex,Integer32,not-accessible,,current,,Peer Index for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.22.2.1.2,AP80-PRIVATE-MIB::wdsPeerBssid,OCTET,read-write,,current,,The BSSID for this peer.
.1.3.6.1.4.1.14823.2.3.2.24,AP80-PRIVATE-MIB::enterpriseApWMM,,,,,,
.1.3.6.1.4.1.14823.2.3.2.24.1,AP80-PRIVATE-MIB::enterpriseApWMMTable,,not-accessible,,current,,The table of WMM information for each radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.1.1,AP80-PRIVATE-MIB::enterpriseApWMMEntry,,not-accessible,enterpriseApWMMModeIndex,current,,An entry of table, contains the WMM information.
.1.3.6.1.4.1.14823.2.3.2.24.1.1.1,AP80-PRIVATE-MIB::enterpriseApWMMModeIndex,Integer32,not-accessible,,current,,Peer Index for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.1.1.2,AP80-PRIVATE-MIB::enterpriseApWMMMode,INTEGER,read-write,,current,disabled(1):support(2):required(3),This value indicates the WMM mode for the radio interface. disabled(1) To set WMM mode disabled. support (2) To set WMM mode supported. required(3) To set WMM mode required.
.1.3.6.1.4.1.14823.2.3.2.24.2,AP80-PRIVATE-MIB::enterpriseApWMMAckPolicyTable,,not-accessible,,current,,The table of WMM Ack Policy information for each ac number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.2.1,AP80-PRIVATE-MIB::enterpriseApWMMAckPolicyEntry,,not-accessible,enterpriseApWMMAckPolicyIndex,current,,An entry of table, contains the WMM Ack Policy information.
.1.3.6.1.4.1.14823.2.3.2.24.2.1.1,AP80-PRIVATE-MIB::enterpriseApWMMAckPolicyIndex,Integer32,read-only,,current,,The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effect) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
.1.3.6.1.4.1.14823.2.3.2.24.2.1.2,AP80-PRIVATE-MIB::enterpriseApWMMACKPolicy,INTEGER,read-write,,current,acknowledge(1):NoAcknowledge(2),This value indicates WMM Ack Policy state of each ac number for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.3,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamTable,,not-accessible,,current,,The table of WMM BSS parameter information.
.1.3.6.1.4.1.14823.2.3.2.24.3.1,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamEntry,,not-accessible,enterpriseApWMMBSSParamIndex,current,,An entry of table, contains the WMM BSS parameter information for each ac number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.3.1.1,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamIndex,Integer32,read-only,,current,,The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effort) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
.1.3.6.1.4.1.14823.2.3.2.24.3.1.2,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamLogCwMin,Integer32,read-write,,current,,This value indicates the WMM BSS parameter logCwMin of AC number for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.3.1.3,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamLogCwMax,Integer32,read-write,,current,,This value indicates the WMM BSS parameter logCwMax of each AC number for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.3.1.4,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamAIFSN,Integer32,read-write,,current,,This value indicates the WMM BSS parameters AIFSN of each AC number for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.3.1.5,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamTXOPLimit,Integer32,read-write,,current,,This value indicates the WMM BSS parameters TXOP Limit of each AC number for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.3.1.6,AP80-PRIVATE-MIB::enterpriseApWMMBSSParamAdmissionCtrl,INTEGER,read-write,,current,ebabled(1):disabled(2),This value indicates the BSS parameters Admission Control of each AC number for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.4,AP80-PRIVATE-MIB::enterpriseApWMMAPParamTable,,not-accessible,,current,,The table of configuration information for WMM AP parameters for each ac number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.4.1,AP80-PRIVATE-MIB::enterpriseApWMMAPParamEntry,,not-accessible,enterpriseApWMMAPParamIndex,current,,An entry table, include the Ap parameter information for each ac numbers.
.1.3.6.1.4.1.14823.2.3.2.24.4.1.1,AP80-PRIVATE-MIB::enterpriseApWMMAPParamIndex,Integer32,read-only,,current,,The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effort) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
.1.3.6.1.4.1.14823.2.3.2.24.4.1.2,AP80-PRIVATE-MIB::enterpriseApWMMAPParamLogCwMin,Integer32,read-write,,current,,This value indicates the LogCwMin of AP parameter for each AC number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.4.1.3,AP80-PRIVATE-MIB::enterpriseApWMMAPParamLogCwMax,Integer32,read-write,,current,,This value indicates the LogCwMax of AP parameter for each AC number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.4.1.4,AP80-PRIVATE-MIB::enterpriseApWMMAPParamAIFSN,Integer32,read-write,,current,,This value indicates the AIFSN of AP parameter for each AC number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.4.1.5,AP80-PRIVATE-MIB::enterpriseApWMMAPParamTXOPLimit,Integer32,read-write,,current,,This value indicates the TXOP Limit of AP parameter for each AC number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.24.4.1.6,AP80-PRIVATE-MIB::enterpriseApWMMAPParamAdmissionCtrl,INTEGER,read-write,,current,ebabled(1):disabled(2),This value indicates the admission control of AP parameter for each AC number on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.25,AP80-PRIVATE-MIB::enterpriseApSTP,,,,,,
.1.3.6.1.4.1.14823.2.3.2.25.1,AP80-PRIVATE-MIB::enterpriseApSTPBridgeStatus,INTEGER,read-write,,current,enabled(1):disabled(2),This value indicates the STP bridge status for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.25.2,AP80-PRIVATE-MIB::enterpriseApSTPBridgePriority,Integer32,read-write,,current,,This value indicates the STP bridge priority for the radio interface.
.1.3.6.1.4.1.14823.2.3.2.25.3,AP80-PRIVATE-MIB::enterpriseApSTPBridgeMaxAge,Integer32,read-write,,current,,This value indicates the STP bridge max age for the radio interface.(unit: second)
.1.3.6.1.4.1.14823.2.3.2.25.4,AP80-PRIVATE-MIB::enterpriseApSTPHelloTime,Integer32,read-write,,current,,This value indicates the STP hello time for the radio interface.(unit: second)
.1.3.6.1.4.1.14823.2.3.2.25.5,AP80-PRIVATE-MIB::enterpriseApSTPBridgeForwardingDelay,Integer32,read-write,,current,,This value indicates the STP forwarding delay for the radio interface.(unit: second)
.1.3.6.1.4.1.14823.2.3.2.25.6,AP80-PRIVATE-MIB::enterpriseApSTPRadioInterface,,,,,,
.1.3.6.1.4.1.14823.2.3.2.25.6.1,AP80-PRIVATE-MIB::enterpriseApSTPNodeTable,,not-accessible,,current,,The table of STP link Path Cost and link port priority information for each nodes on radio interface.
.1.3.6.1.4.1.14823.2.3.2.25.6.1.1,AP80-PRIVATE-MIB::enterpriseApSTPNodeEntry,,not-accessible,enterpriseApSTPNodeIndex,current,,An entry in a table, contain the link path cost and link port priroity information.
.1.3.6.1.4.1.14823.2.3.2.25.6.1.1.1,AP80-PRIVATE-MIB::enterpriseApSTPNodeIndex,Integer32,not-accessible,,current,,Peer Index for the nodes on the radio interface.
.1.3.6.1.4.1.14823.2.3.2.25.6.1.1.2,AP80-PRIVATE-MIB::enterpriseApSTPNodeLinkPathCost,Integer32,read-write,,current,,This value indicates the link path cost for the node on this radio interface.
.1.3.6.1.4.1.14823.2.3.2.25.6.1.1.3,AP80-PRIVATE-MIB::enterpriseApSTPNodeLinkPortPriority,Integer32,read-write,,current,,This value indicates the link path cost for the node on this radio interface.
.1.3.6.1.4.1.14823.2.3.2.25.7,AP80-PRIVATE-MIB::enterpriseApSTPEthernetInterface,,,,,,
.1.3.6.1.4.1.14823.2.3.2.25.7.1,AP80-PRIVATE-MIB::enterpriseApSTPEthernetLinkPathCost,Integer32,read-write,,current,,This value indicates link path cost for ethernet interface.
.1.3.6.1.4.1.14823.2.3.2.25.7.2,AP80-PRIVATE-MIB::enterpriseApSTPEthernetLinkPortPriority,Integer32,read-write,,current,,This value indicates link port prirorty for ethernet interface.
.1.3.6.1.4.1.14823.2.3.3,ARUBA-MIB::aiEnterpriseMibModules,,,,,,
.1.3.6.1.4.1.14823.2.3.3.1,AI-AP-MIB::aiMIB,,,,,,This MIB is for managing Aruba Instant WLAN
.1.3.6.1.4.1.14823.2.3.3.1.1,AI-AP-MIB::aiInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.3.1.1.1,AI-AP-MIB::aiVirtualControllerKey,OCTET,read-only,,current,,Unique Virtual Controller key
.1.3.6.1.4.1.14823.2.3.3.1.1.2,AI-AP-MIB::aiVirtualControllerName,OCTET,read-only,,current,,Virtual Controller name
.1.3.6.1.4.1.14823.2.3.3.1.1.3,AI-AP-MIB::aiVirtualControllerOrganization,OCTET,read-only,,current,,Virtual Controller organization
.1.3.6.1.4.1.14823.2.3.3.1.1.4,AI-AP-MIB::aiVirtualControllerVersion,OCTET,read-only,,current,,Software Version
.1.3.6.1.4.1.14823.2.3.3.1.1.5,AI-AP-MIB::aiVirtualControllerIPAddress,IpAddress,read-only,,current,,Virtual Controller IP Address. If this is not set, returns 0.0.0.0
.1.3.6.1.4.1.14823.2.3.3.1.1.6,AI-AP-MIB::aiMasterIPAddress,IpAddress,read-only,,current,,IP Address of AP where virtual controller software is active
.1.3.6.1.4.1.14823.2.3.3.1.1.7,AI-AP-MIB::aiWlanSSIDTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.3.1.1.7.1,AI-AP-MIB::aiWlanSSIDEntry,,not-accessible,aiSSIDIndex,current,, 
.1.3.6.1.4.1.14823.2.3.3.1.1.7.1.1,AI-AP-MIB::aiSSIDIndex,Integer32,read-only,,current,,SSID Index
.1.3.6.1.4.1.14823.2.3.3.1.1.7.1.2,AI-AP-MIB::aiSSID,OCTET,read-only,,current,,SSID
.1.3.6.1.4.1.14823.2.3.3.1.1.7.1.3,AI-AP-MIB::aiSSIDStatus,INTEGER,read-only,,current,enable(0):disable(1),Indicates the whether the SSID is enabled(0) or disabled(1)
.1.3.6.1.4.1.14823.2.3.3.1.1.7.1.4,AI-AP-MIB::aiSSIDClientNum,Integer32,read-only,,current,,Client Number of per SSID
.1.3.6.1.4.1.14823.2.3.3.1.1.7.1.5,AI-AP-MIB::aiSSIDHide,INTEGER,read-only,,current,enable(1):disable(0),Indicates the whether the SSID is hide enabled(1) or disabled(0)
.1.3.6.1.4.1.14823.2.3.3.1.1.8,AI-AP-MIB::aiInterferAccessPointTable,,not-accessible,,current,,This contains all interfer access points infomation
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1,AI-AP-MIB::aiInterferAccessPointEntry,,not-accessible,aiInterferAPIndex,current,, 
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.1,AI-AP-MIB::aiInterferAPIndex,Integer32,read-only,,current,,Interfer Access Point Index
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.2,AI-AP-MIB::aiInterferAPBSSID,OCTET,read-only,,current,,Interfer Access Point MAC
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.3,AI-AP-MIB::aiInterferAPESSID,OCTET,read-only,,current,,Interfer Access Point ESSID
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.4,AI-AP-MIB::aiInterferAPChannel,OCTET,read-only,,current,,Interfer Access Point Channel
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.5,AI-AP-MIB::aiInterferAPPhyType,OCTET,read-only,,current,,Interfer Access Point Phy Type
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.6,AI-AP-MIB::aiInterferAPEncr,OCTET,read-only,,current,,Interfer Access Point Encryption
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.7,AI-AP-MIB::aiInterferAPAvgSnr,Integer32,read-only,,current,,Interfer Access Point Average Snr
.1.3.6.1.4.1.14823.2.3.3.1.1.8.1.8,AI-AP-MIB::aiInterferAPType,OCTET,read-only,,current,,Interfer Access Point AP Type
.1.3.6.1.4.1.14823.2.3.3.1.1.15,AI-AP-MIB::aiMeshTable,,not-accessible,,current,,
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1,AI-AP-MIB::aiMeshEntry,,not-accessible,aiMeshIndex,current,, 
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.1,AI-AP-MIB::aiMeshIndex,Integer32,read-only,,current,,Mesh Index
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.2,AI-AP-MIB::aiMeshPointMac,OCTET,read-only,,current,,Mesh Point Mac Address
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.3,AI-AP-MIB::aiMeshPortalMac,OCTET,read-only,,current,,Mesh Portal Mac Address
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.4,AI-AP-MIB::aiMeshChannel,OCTET,read-only,,current,,Mesh Channel
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.5,AI-AP-MIB::aiMeshAvgRssi,Integer32,read-only,,current,,Mesh Average RSSI
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.6,AI-AP-MIB::aiMeshHops,Integer32,read-only,,current,,Mesh Hops
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.7,AI-AP-MIB::aiMeshAge,Integer32,read-only,,current,,Mesh Age
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.8,AI-AP-MIB::aiMeshCost,OCTET,read-only,,current,,Mesh Cost
.1.3.6.1.4.1.14823.2.3.3.1.1.15.1.9,AI-AP-MIB::aiMeshRelation,OCTET,read-only,,current,,Mesh Relation
.1.3.6.1.4.1.14823.2.3.3.1.2,AI-AP-MIB::aiStateGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.3.1.2.1,AI-AP-MIB::aiAccessPointTable,,not-accessible,,current,,This contains all access points connected to the virtual controller. This table is empty on AP where virtual controller is not active
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1,AI-AP-MIB::aiAccessPointEntry,,not-accessible,aiAPMACAddress,current,, 
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.1,AI-AP-MIB::aiAPMACAddress,OCTET,read-only,,current,,Access Point MAC Address
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.2,AI-AP-MIB::aiAPName,OCTET,read-only,,current,,Access Point name
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.3,AI-AP-MIB::aiAPIPAddress,IpAddress,read-only,,current,,Access Point IP Address
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.4,AI-AP-MIB::aiAPSerialNum,OCTET,read-only,,current,,Access Point Serial Number
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.5,AI-AP-MIB::aiAPModel,OBJECT,read-only,,current,,Access Point System OID
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.6,AI-AP-MIB::aiAPModelName,OCTET,read-only,,current,,Access Point Model Name
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.7,AI-AP-MIB::aiAPCPUUtilization,Integer32,read-only,,current,,Access Point CPU Utilization
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.8,AI-AP-MIB::aiAPMemoryFree,Integer32,read-only,,current,,Amount of memory free in the access point in bytes
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.9,AI-AP-MIB::aiAPUptime,TimeTicks,read-only,,current,,Access Point uptime
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.10,AI-AP-MIB::aiAPTotalMemory,Integer32,read-only,,current,,Total amount of memory available in the AP in bytes
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.11,AI-AP-MIB::aiAPStatus,INTEGER,read-only,,current,up(1):down(2),Indicates the Access Point Status
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.12,AI-AP-MIB::aiAPHwopmode,INTEGER,read-only,,current,default(0):rsdbsplit(1):rsdb5g(2):rsdb2g(3):dual5gon(4):dual5goff(5):split5goff(6):split5gon(7),AP HW OPMODE
.1.3.6.1.4.1.14823.2.3.3.1.2.1.1.13,AI-AP-MIB::aiAPRole,OCTET,read-only,,current,,AP State
.1.3.6.1.4.1.14823.2.3.3.1.2.2,AI-AP-MIB::aiRadioTable,,not-accessible,,current,,This table contains all radios of all access points connected to the virtual controller. This table is indexed by Access Point MAC Address and radio number
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1,AI-AP-MIB::aiRadioEntry,,not-accessible,aiRadioAPMACAddress:aiRadioIndex,current,, 
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.1,AI-AP-MIB::aiRadioAPMACAddress,OCTET,read-only,,current,,MAC Address of access point where this radio is active
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.2,AI-AP-MIB::aiRadioIndex,Integer32,read-only,,current,,Radio number
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.3,AI-AP-MIB::aiRadioMACAddress,OCTET,read-only,,current,,Radio MAC Address
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.4,AI-AP-MIB::aiRadioChannel,OCTET,read-only,,current,, Radio channel. First byte contains primary channel and first two bits on second byte contains indicator for secondary channel. If first two bits of second byte is 0, it is a 20MHz channel. If first two bits of second byte is 01, secondary channel is above primary channel, if first two bits of second by is 10, secondary channel is below the primary channel. 
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.5,AI-AP-MIB::aiRadioTransmitPower,Integer32,read-only,,current,,Radio transmit power
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.6,AI-AP-MIB::aiRadioNoiseFloor,Integer32,read-only,,current,,Radio noise floor in dBm
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.7,AI-AP-MIB::aiRadioUtilization4,Integer32,read-only,,current,,Radio channel utilization 4 second average
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.8,AI-AP-MIB::aiRadioUtilization64,Integer32,read-only,,current,,Radio channel utilization 64 second average
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.9,AI-AP-MIB::aiRadioTxTotalFrames,Counter32,read-only,,current,,Total transmitted frames
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.10,AI-AP-MIB::aiRadioTxMgmtFrames,Counter32,read-only,,current,,Transmitted management frames
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.11,AI-AP-MIB::aiRadioTxDataFrames,Counter32,read-only,,current,,Transmitted data frames
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.12,AI-AP-MIB::aiRadioTxDataBytes,Counter32,read-only,,current,,Transmitted data bytes
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.13,AI-AP-MIB::aiRadioTxDrops,Counter32,read-only,,current,,Total frames dropped during transmission
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.14,AI-AP-MIB::aiRadioRxTotalFrames,Counter32,read-only,,current,,Total received frames
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.15,AI-AP-MIB::aiRadioRxDataFrames,Counter32,read-only,,current,,Received data frames
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.16,AI-AP-MIB::aiRadioRxDataBytes,Counter32,read-only,,current,,Received data bytes
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.17,AI-AP-MIB::aiRadioRxMgmtFrames,Counter32,read-only,,current,,Received management frames
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.18,AI-AP-MIB::aiRadioRxBad,Counter32,read-only,,current,,Frames received in error
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.19,AI-AP-MIB::aiRadioPhyEvents,Counter32,read-only,,current,,Number of phy events that indicates frames not received because of interference
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.20,AI-AP-MIB::aiRadioStatus,INTEGER,read-only,,current,up(1):down(2),Radio state of AP - UP/DOWN
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.21,AI-AP-MIB::aiRadioClientNum,Integer32,read-only,,current,,Client Number of per Radio
.1.3.6.1.4.1.14823.2.3.3.1.2.2.1.22,AI-AP-MIB::aiRadioMode,OCTET,read-only,,current,,Radio state of AP - access/monitor
.1.3.6.1.4.1.14823.2.3.3.1.2.3,AI-AP-MIB::aiWlanTable,,not-accessible,,current,,This table contains all BSSIDs active on this virtual controller. This table is indexed by Access Point MAC  Address and a WLAN Index
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1,AI-AP-MIB::aiWlanEntry,,not-accessible,aiWlanAPMACAddress:aiWlanIndex,current,, 
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.1,AI-AP-MIB::aiWlanAPMACAddress,OCTET,read-only,,current,,MAC Address of access point where WLAN is active
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.2,AI-AP-MIB::aiWlanIndex,Integer32,read-only,,current,,Index of WLAN. This is a unique index assigned to the WLAN active on the access point.
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.3,AI-AP-MIB::aiWlanESSID,OCTET,read-only,,current,,ESSID of WLAN
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.4,AI-AP-MIB::aiWlanMACAddress,OCTET,read-only,,current,,BSSID of WLAN
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.5,AI-AP-MIB::aiWlanTxTotalFrames,Counter32,read-only,,current,,Total transmitted frames
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.6,AI-AP-MIB::aiWlanTxDataFrames,Counter32,read-only,,current,,Transmitted data frames
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.7,AI-AP-MIB::aiWlanTxDataBytes,Counter32,read-only,,current,,Transmitted data bytes
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.8,AI-AP-MIB::aiWlanRxTotalFrames,Counter32,read-only,,current,,Total received frames
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.9,AI-AP-MIB::aiWlanRxDataFrames,Counter32,read-only,,current,,Received data frames
.1.3.6.1.4.1.14823.2.3.3.1.2.3.1.10,AI-AP-MIB::aiWlanRxDataBytes,Counter32,read-only,,current,,Received data bytes
.1.3.6.1.4.1.14823.2.3.3.1.2.4,AI-AP-MIB::aiClientTable,,not-accessible,,current,,This table contains information about all clients connected to the virtual controller. When a client roams from one access point to another, all counters in this  table are reset to 0. aiClientUptime also get reset on a mobility event
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1,AI-AP-MIB::aiClientEntry,,not-accessible,aiClientMACAddress,current,, 
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.1,AI-AP-MIB::aiClientMACAddress,OCTET,read-only,,current,,MAC Address of client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.2,AI-AP-MIB::aiClientWlanMACAddress,OCTET,read-only,,current,,BSSID of WLAN where client is associated
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.3,AI-AP-MIB::aiClientIPAddress,IpAddress,read-only,,current,,Client IP Address
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.4,AI-AP-MIB::aiClientAPIPAddress,IpAddress,read-only,,current,,Associated Access Point IP Address
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.5,AI-AP-MIB::aiClientName,OCTET,read-only,,current,,Name of user using the client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.6,AI-AP-MIB::aiClientOperatingSystem,OCTET,read-only,,current,,Client operating system
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.7,AI-AP-MIB::aiClientSNR,Integer32,read-only,,current,,Signal to noise ratio of client connection to the access point
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.8,AI-AP-MIB::aiClientTxDataFrames,Counter32,read-only,,current,,Total frames transmitted by the client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.9,AI-AP-MIB::aiClientTxDataBytes,Counter32,read-only,,current,,Total bytes transmitted by the client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.10,AI-AP-MIB::aiClientTxRetries,Counter32,read-only,,current,,Total number of retry frames transmitted by the client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.11,AI-AP-MIB::aiClientTxRate,Integer32,read-only,,current,,Transmit rate of client in mbps
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.12,AI-AP-MIB::aiClientRxDataFrames,Counter32,read-only,,current,,Total frames received by the client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.13,AI-AP-MIB::aiClientRxDataBytes,Counter32,read-only,,current,,Total bytes received by the client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.14,AI-AP-MIB::aiClientRxRetries,Counter32,read-only,,current,,Total number of retry frames received by the client
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.15,AI-AP-MIB::aiClientRxRate,Integer32,read-only,,current,,Receive rate of client in mbps
.1.3.6.1.4.1.14823.2.3.3.1.2.4.1.16,AI-AP-MIB::aiClientUptime,TimeTicks,read-only,,current,,Client uptime. On mobility event all counters are reset to 0 and uptime gets reset to 0.
.1.3.6.1.4.1.14823.2.3.3.1.2.5,AI-AP-MIB::aiVoiceClientTable,,not-accessible,,current,,Table of voice clients
.1.3.6.1.4.1.14823.2.3.3.1.2.5.1,AI-AP-MIB::aiVoiceClientEntry,,not-accessible,aiClientMac,current,,Entry of a voice client
.1.3.6.1.4.1.14823.2.3.3.1.2.5.1.1,AI-AP-MIB::aiClientMac,OCTET,read-only,,current,,MAC address of voice client
.1.3.6.1.4.1.14823.2.3.3.1.2.5.1.2,AI-AP-MIB::aiClientIP,IpAddress,read-only,,current,,IP address of voice client
.1.3.6.1.4.1.14823.2.3.3.1.2.5.1.3,AI-AP-MIB::aiClientAPMac,OCTET,read-only,,current,,MAC address of AP on which voice client is associated currently
.1.3.6.1.4.1.14823.2.3.3.1.2.5.1.4,AI-AP-MIB::aiClientAPName,OCTET,read-only,,current,,Name of AP on which voice client is associated currently
.1.3.6.1.4.1.14823.2.3.3.1.3,AI-AP-MIB::aiManagedInfoGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.3.1.3.1,AI-AP-MIB::aiManagedModeSinceLastSync,OCTET,read-only,,current,,Time since last config was applied
.1.3.6.1.4.1.14823.2.3.3.1.200,AI-AP-MIB::aiTrapsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.3.1.200.1,AI-AP-MIB::aiTrapObjectsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.3.1.200.1.1,AI-AP-MIB::wlsxTrapAPMacAddress,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate  the wired MAC address of an access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.2,AI-AP-MIB::wlsxTrapAPIpAddress,IpAddress,accessible-for-notify,,current,,  This object is used in the traps to indicate  the IP address of an access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.3,AI-AP-MIB::wlsxTrapAPBSSID,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the BSSID of the access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.4,AI-AP-MIB::wlsxTrapEssid,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.5,AI-AP-MIB::wlsxTrapTargetAPBSSID,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.6,AI-AP-MIB::wlsxTrapTargetAPSSID,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.7,AI-AP-MIB::wlsxTrapTargetAPChannel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the channel of the access point, for which the trap is being raised. If an wlsxr monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.8,AI-AP-MIB::wlsxTrapNodeMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of a node. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.9,AI-AP-MIB::wlsxTrapSourceMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the source. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.10,AI-AP-MIB::wlsxReceiverMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the receiver. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.11,AI-AP-MIB::wlsxTrapTransmitterMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the transmitter. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.12,AI-AP-MIB::wlsxTrapReceiverMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address of the receiver. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.13,AI-AP-MIB::wlsxTrapSnr,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Signal to Noise ratio. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.14,AI-AP-MIB::wlsxTrapSignatureName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Signature Name. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.15,AI-AP-MIB::wlsxTrapFrameType,INTEGER,accessible-for-notify,,current,associateRequest(0):associateResponse(1):reassociateRequest(2):reassociateResponse(3):probeRequest(4):probeResponse(5):beacon(8):atim(9):disassociate(10):auth(11):deauth(12),  This object is used in the traps to indicate the Frame Type 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.16,AI-AP-MIB::wlsxTrapAddressType,INTEGER,accessible-for-notify,,current,srcAddress(1):dstAddress(2):bssid(3),  This object is used in the traps to indicate the Address type. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.17,AI-AP-MIB::wlsxTrapAPLocation,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Location of the AP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.18,AI-AP-MIB::wlsxTrapAPChannel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Current Channel. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.19,AI-AP-MIB::wlsxTrapAPTxPower,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the AP Transmit Power. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.20,AI-AP-MIB::wlsxTrapMatchedMac,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the MAC address 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.21,AI-AP-MIB::wlsxTrapMatchedIp,IpAddress,accessible-for-notify,,current,,  This object is used in the traps to indicate the IP address 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.22,AI-AP-MIB::wlsxTrapRogueIfoURL,OCTET,accessible-for-notify,,current,,  This object is used to point to the WEBUI Rogue AP information URL. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.23,AI-AP-MIB::wlsxTrapVlanId,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the VLAN Id. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.24,AI-AP-MIB::wlsxTrapAdminStatus,INTEGER,accessible-for-notify,,current,enabled(1):disabled(2),  This object is used in the traps to indicate the admin status of VLAN. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.25,AI-AP-MIB::wlsxTrapOperStatus,INTEGER,accessible-for-notify,,current,up(1):down(2):testing(3),  This object is used in the traps to indicate the admin status of VLAN. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.26,AI-AP-MIB::wlsxTrapAuthServerName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Authentication Server used for Authentication. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.27,AI-AP-MIB::wlsxTrapAuthServerTimeout,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Authentication Server Timeout. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.28,AI-AP-MIB::wlsxTrapCardSlot,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Slot in which this card is present. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.29,AI-AP-MIB::wlsxTrapTemperatureValue,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Temperature Value. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.30,AI-AP-MIB::wlsxTrapProcessName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Process name. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.31,AI-AP-MIB::wlsxTrapFanNumber,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Fan Number. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.32,AI-AP-MIB::wlsxTrapVoltageType,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the type of Voltage. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.33,AI-AP-MIB::wlsxTrapVoltageValue,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the voltage value in Float. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.34,AI-AP-MIB::wlsxTrapStationBlackListReason,INTEGER,accessible-for-notify,,current,userDefined(1):mitmAttack(2):authFailure(3):pingFlood(4):sessionFlood(5):synFlood(6):sessionBlacklist(7):ipSpoofing(8):esiBlacklist(9):other(100),  The Reason for which a station is black listed. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.35,AI-AP-MIB::wlsxTrapSpoofedIpAddress,IpAddress,accessible-for-notify,,current,,  This object is used in a trap to identify a spoofed IP address. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.36,AI-AP-MIB::wlsxTrapSpoofedOldPhyAddress,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify an old MAC address. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.37,AI-AP-MIB::wlsxTrapSpoofedNewPhyAddress,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify a New MAC address. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.38,AI-AP-MIB::wlsxTrapDBName,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify name of the database. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.39,AI-AP-MIB::wlsxTrapDBUserName,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify name of the database user. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.40,AI-AP-MIB::wlsxTrapDBIpAddress,OCTET,accessible-for-notify,,current,,  This object is used in a trap to identify the IpAddress of the  Database. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.41,AI-AP-MIB::wlsxTrapDBType,INTEGER,accessible-for-notify,,current,mssql(1):mysql(2),  This object is used in a trap to identify the port of the user. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.42,AI-AP-MIB::wlsxTrapVrrpID,Integer32,accessible-for-notify,,current,,  This object contains the Virtual Router Identifier. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.43,AI-AP-MIB::wlsxTrapVrrpMasterIp,IpAddress,accessible-for-notify,,current,,  This object contains the Master IP address. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.44,AI-AP-MIB::wlsxTrapVrrpOperState,INTEGER,accessible-for-notify,,current,initialize(1):backup(2):master(3),  This object represents the VRRP Operational state. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.45,AI-AP-MIB::wlsxTrapESIServerGrpName,OCTET,accessible-for-notify,,current,,  This object represents the External Services Interface (ESI) Server Group name 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.46,AI-AP-MIB::wlsxTrapESIServerName,OCTET,accessible-for-notify,,current,,  This object represents the External Services Interface (ESI) Server Name 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.47,AI-AP-MIB::wlsxTrapESIServerIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents the External Services Interface (ESI) Server IP address 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.48,AI-AP-MIB::wlsxTrapLicenseDaysRemaining,Integer32,accessible-for-notify,,current,,  This object represents number of the days remaining prior to a  license expiry. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.49,AI-AP-MIB::wlsxTrapSwitchIp,IpAddress,accessible-for-notify,,current,,  This object represents the controller IP address.  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.50,AI-AP-MIB::wlsxTrapSwitchRole,INTEGER,accessible-for-notify,,current,master(1):local(2):backupmaster(3),  This object represents the Role of the controller.  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.51,AI-AP-MIB::wlsxTrapUserIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents IP address of the User. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.52,AI-AP-MIB::wlsxTrapUserPhyAddress,OCTET,accessible-for-notify,,current,,  This object represents MAC address of the User. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.53,AI-AP-MIB::wlsxTrapUserName,OCTET,accessible-for-notify,,current,,  This object represents the user name. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.54,AI-AP-MIB::wlsxTrapUserRole,OCTET,accessible-for-notify,,current,,  This object represents the Authentication method of the user. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.55,AI-AP-MIB::wlsxTrapUserAuthenticationMethod,INTEGER,accessible-for-notify,,current,none(0):web(1):mac(2):vpn(3):dot1x(4):kerberos(5):secureId(7):pubcookie(15):xSec(16):xSecMachine(17):via-vpn(28):other(255),  This object represents the Authentication method of the user. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.56,AI-AP-MIB::wlsxTrapAPRadioNumber,Integer32,accessible-for-notify,,current,,  This object represents the radio number. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.57,AI-AP-MIB::wlsxTrapRogueInfoURL,OCTET,accessible-for-notify,,current,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.58,AI-AP-MIB::wlsxTrapInterferingAPInfoURL,OCTET,accessible-for-notify,,current,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.59,AI-AP-MIB::wlsxTrapPortNumber,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the port number. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.60,AI-AP-MIB::wlsxTrapTime,OCTET,accessible-for-notify,,current,,  This object is used in all the enterprise traps to indicate the the time when the trap is generated on the controller. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.61,AI-AP-MIB::wlsxTrapHostIp,IpAddress,accessible-for-notify,,current,,  This object represents the Trap host.  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.62,AI-AP-MIB::wlsxTrapHostPort,Integer32,accessible-for-notify,,current,,  This object represents the Trap host port.  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.63,AI-AP-MIB::wlsxTrapConfigurationId,Integer32,accessible-for-notify,,current,,  This object represents the ID of the configuration, to be used in traps. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.64,AI-AP-MIB::wlsxTrapCTSURL,OCTET,accessible-for-notify,,current,,  This object represents the URL from which the transfer should happen. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.65,AI-AP-MIB::wlsxTrapCTSTransferType,OCTET,accessible-for-notify,,current,,  This object represents the transfer type, upload or download. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.66,AI-AP-MIB::wlsxTrapConfigurationState,INTEGER,accessible-for-notify,,current,success(1):error(2),  This object represents state of the configuration transfer. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.67,AI-AP-MIB::wlsxTrapUpdateFailureReason,OCTET,accessible-for-notify,,current,,  This object represents the reason for the update failure. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.68,AI-AP-MIB::wlsxTrapUpdateFailedObj,OCTET,accessible-for-notify,,current,,  This variable represents the AMAPI object which is the reason for the the update failure. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.69,AI-AP-MIB::wlsxTrapTableEntryChangeType,INTEGER,accessible-for-notify,,current,create(1):delete(2):modify(3),  This object represents type of the configuration change.  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.70,AI-AP-MIB::wlsxTrapGlobalConfigObj,OCTET,accessible-for-notify,,current,,  This variable represents the AMAPI object corresponding to the global configuration change. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.71,AI-AP-MIB::wlsxTrapTableGenNumber,Integer32,accessible-for-notify,,current,,  This object represents generation number of a table. Used in the MMS, to keep track of the table content changes. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.72,AI-AP-MIB::wlsxTrapLicenseId,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the license ID. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.73,AI-AP-MIB::wlsxTrapConfidenceLevel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Confidence Level as a percentage 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.74,AI-AP-MIB::wlsxTrapMissingLicenses,OCTET,accessible-for-notify,,current,,  This variable indicates any licenses that are not present during a configuration update 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.75,AI-AP-MIB::wlsxVoiceCurrentNumCdr,Integer32,accessible-for-notify,,current,,  This object represents the number of CDRs in buffer. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.76,AI-AP-MIB::wlsxTrapTunnelId,Integer32,accessible-for-notify,,current,,  This Object represents the tunnel ID. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.77,AI-AP-MIB::wlsxTrapTunnelStatus,Integer32,accessible-for-notify,,current,,  This Object represents the tunnel Status. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.78,AI-AP-MIB::wlsxTrapTunnelUpReason,OCTET,accessible-for-notify,,current,,  This Object represents the tunnel up reason. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.79,AI-AP-MIB::wlsxTrapTunnelDownReason,OCTET,accessible-for-notify,,current,,  This Object represents the tunnel down reason. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.80,AI-AP-MIB::wlsxTrapApSerialNumber,OCTET,accessible-for-notify,,current,,  This object represents the AP Serial Number. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.81,AI-AP-MIB::wlsxTrapTimeStr,OCTET,accessible-for-notify,,current,,  This object represents the Time in String format. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.82,AI-AP-MIB::wlsxTrapMasterIp,IpAddress,accessible-for-notify,,current,,  This object represents the master IP address.  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.83,AI-AP-MIB::wlsxTrapLocalIp,IpAddress,accessible-for-notify,,current,,  This object represents the Local IP address. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.84,AI-AP-MIB::wlsxTrapMasterName,OCTET,accessible-for-notify,,current,,  This object represents the master controller name. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.85,AI-AP-MIB::wlsxTrapLocalName,OCTET,accessible-for-notify,,current,,  This object represents the local controller name. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.86,AI-AP-MIB::wlsxTrapPrimaryControllerIp,IpAddress,accessible-for-notify,,current,,  This object represents the IP address of the AP's primary controller. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.87,AI-AP-MIB::wlsxTrapBackupControllerIp,IpAddress,accessible-for-notify,,current,,  This object represents the IP address of the AP's backup controller. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.88,AI-AP-MIB::wlsxTrapSpoofedFrameType,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Spoofed Frame Type 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.89,AI-AP-MIB::wlsxTrapAssociationType,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the type of association 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.90,AI-AP-MIB::wlsxTrapDeviceIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents the IP address of a device seen by an AP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.91,AI-AP-MIB::wlsxTrapDeviceMac,OCTET,accessible-for-notify,,current,,  This object represents the MAC address of a device seen by an AP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.92,AI-AP-MIB::wlsxTrapVcIpAddress,IpAddress,accessible-for-notify,,current,,  This object represents the Ip Address of a Voice client. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.93,AI-AP-MIB::wlsxTrapVcMacAddress,OCTET,accessible-for-notify,,current,,  This object represents the MAC address of a Voice client. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.94,AI-AP-MIB::wlsxTrapAPName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the Name of the AP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.95,AI-AP-MIB::wlsxTrapApMode,Integer32,accessible-for-notify,,current,,  This Object represents the AP Mode. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.96,AI-AP-MIB::wlsxTrapAPPrevChannel,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate the Previous Channel. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.97,AI-AP-MIB::wlsxTrapAPPrevChannelSec,INTEGER,accessible-for-notify,,current,none(1):above(2):below(3),  This object is used in the traps to indicate the Previous Secondary Channel. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.98,AI-AP-MIB::wlsxTrapAPPrevTxPower,Integer32,accessible-for-notify,,current,,  This object is used in the traps to indicate previous AP Transmit Power. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.99,AI-AP-MIB::wlsxTrapAPCurMode,INTEGER,accessible-for-notify,,current,airMonitor(1):accessPoint(2):accessPointAndMonitor(3):meshPortal(4):meshPoint(5):rfprotectSensor(6):spectrumSensor(7),  This Object represents the APs Current Mode. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.100,AI-AP-MIB::wlsxTrapAPPrevMode,INTEGER,accessible-for-notify,,current,airMonitor(1):accessPoint(2):accessPointAndMonitor(3):meshPortal(4):meshPoint(5):rfprotectSensor(6):spectrumSensor(7),  This Object represents the APs Previous Mode. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.101,AI-AP-MIB::wlsxTrapAPARMChangeReason,INTEGER,accessible-for-notify,,current,radarDetected(1):radarCleared(2):txHang(3):txHangClear(4):fortyMhzIntol(5):cancel40mhzIntol(6):fortyMhzAlign(7):armInterference(8):armInvalidCh(9):armErrorThresh(10):armNoiseThresh(11):armEmptyCh(12):armRogueCont(13):armDecreasePower(14):armIncreasePower(15):armTurnOffRadio(16):armTurnOnRadio(17),  This Object represents the APs Previous Mode. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.102,AI-AP-MIB::wlsxTrapAPChannelSec,INTEGER,accessible-for-notify,,current,none(1):above(2):below(3),  This object is used in the traps to indicate the Current Secondary Channel. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.103,AI-AP-MIB::wlsxTrapUserAttributeChangeType,INTEGER,accessible-for-notify,,current,create(1):delete(2):modify(3),  This object represents type of the configuration change.  
.1.3.6.1.4.1.14823.2.3.3.1.200.1.104,AI-AP-MIB::wlsxTrapApControllerIp,IpAddress,accessible-for-notify,,current,,  IP address of the controller to which the AP is (or was most recently) registered. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.105,AI-AP-MIB::wlsxTrapApMasterStatus,INTEGER,accessible-for-notify,,current,up(1):down(2):move(3),  Status of the AP as seen by the master when the status changes. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.106,AI-AP-MIB::wlsxTrapCaName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the name of the trustpoint. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.107,AI-AP-MIB::wlsxTrapCrlName,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the name of the crl. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.108,AI-AP-MIB::wlsxTrapCount,Integer32,accessible-for-notify,,current,,  This object represents the number of occurrence of this trap. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.130,AI-AP-MIB::wlsxTrapAPPreviousUplinkType,INTEGER,accessible-for-notify,,current,ethernet(1):usb(2):pppoe(3):wifi(4), This object specifies the up link type for an AP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.131,AI-AP-MIB::wlsxTrapAPPreviousUplinkActiveTime,TimeTicks,accessible-for-notify,,current,, This object specifies the up link type for an AP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.132,AI-AP-MIB::wlsxTrapAPActiveUplinkType,INTEGER,accessible-for-notify,,current,ethernet(1):usb(2):pppoe(3):wifi(4), This object specifies the up link type for an AP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.133,AI-AP-MIB::wlsxTrapAPUplinkChangeReason,INTEGER,accessible-for-notify,,current,linkFailure(1):vpnFailure(2):preemption(3):internetFailover(4), This object specifies the up link change reason. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.138,AI-AP-MIB::wlsxTrapAPManagedModeConfigFailure,OCTET,accessible-for-notify,,current,, This object indicates the error for the failure of config apply on IAP. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.139,AI-AP-MIB::wlsxTrapAuthServerAddress,IpAddress,accessible-for-notify,,current,, This object is used in the traps to indicate the Authentication Server IP used for Authentication. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.140,AI-AP-MIB::wlsxTrapPortalServerName,OCTET,accessible-for-notify,,current,, This object is used in the traps to indicate the Captive Portal Server used for Authentication. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.141,AI-AP-MIB::wlsxTrapPortalServerAddress,OCTET,accessible-for-notify,,current,, This object is used in the traps to indicate the Captive Portal Server IP or host name used for Authentication. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.142,AI-AP-MIB::wlsxTrapPortalServerDownReason,INTEGER,accessible-for-notify,,current,connectFail(1), This object specifies the captive portal server down reason. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.144,AI-AP-MIB::wlsxTrapStationBlackListReasonStr,OCTET,accessible-for-notify,,current,,  This object is used in the traps to indicate the type of Blacklist reason. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.147,AI-AP-MIB::wlsxTrapAPUSBStatus,OCTET,accessible-for-notify,,current,,  This object represents plug in or plug out status of an USB device. 
.1.3.6.1.4.1.14823.2.3.3.1.200.1.148,AI-AP-MIB::wlsxTrapUSBVendorProductID,OCTET,accessible-for-notify,,current,,  This object represents vendor ID or product ID of an USB device. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2,AI-AP-MIB::aiTrapDefinitionsGroup,,,,,,
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1003,AI-AP-MIB::wlsxNodeRateAnomaly,,,,,,  This trap indicates that a node is exceeding the threshold set for  the frame type. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1014,AI-AP-MIB::wlsxNUserEntryCreated,,,,,,  This trap indicates that a new user was created. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1015,AI-AP-MIB::wlsxNUserEntryDeleted,,,,,,  This trap indicates that a user was deleted. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1016,AI-AP-MIB::wlsxNUserEntryAuthenticated,,,,,,  This trap indicates that a user is Authenticated. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1017,AI-AP-MIB::wlsxNUserEntryDeAuthenticated,,,,,,  This trap indicates that a user is Deauthenticated. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1018,AI-AP-MIB::wlsxNUserAuthenticationFailed,,,,,,  This trap indicates that a user authentication has failed. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1019,AI-AP-MIB::wlsxNAuthServerReqTimedOut,,,,,,  This trap indicates that the authentication server request timed out. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1020,AI-AP-MIB::wlsxNAuthServerTimedOut,,,,,,  This trap indicates that the authentication server timed out. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1021,AI-AP-MIB::wlsxNAuthServerIsUp,,,,,,  This trap indicates that an authentication server is up. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1040,AI-AP-MIB::wlsxNAccessPointIsUp,,,,,,  A Trap which indicates that an access point up. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1041,AI-AP-MIB::wlsxNAccessPointIsDown,,,,,,  A Trap which indicates that an access point down. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1043,AI-AP-MIB::wlsxNChannelChanged,,,,,,  This trap indicates that an access point at Location  wlsxTrapAPLocation has changed the channel. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1044,AI-AP-MIB::wlsxNStationAddedToBlackList,,,,,,  This trap indicates that the station is black listed.  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1045,AI-AP-MIB::wlsxNStationRemovedFromBlackList,,,,,,  This trap indicates that the station is removed from the black list.  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1049,AI-AP-MIB::wlsxNRadioAttributesChanged,,,,,,  A Trap which indicates changes in the Radio attributes of an  access point. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1053,AI-AP-MIB::wlsxUnsecureAPDetected,,,,,, This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1054,AI-AP-MIB::wlsxUnsecureAPResolved,,,,,,  This trap indicates that a previously detected access point, classified as Rogue, is no longer present in the network.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1055,AI-AP-MIB::wlsxStaImpersonation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1056,AI-AP-MIB::wlsxReservedChannelViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1057,AI-AP-MIB::wlsxValidSSIDViolation,,,,,,  Valid SSID configuration by using an SSID that is reserved for use by a valid AP only. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1058,AI-AP-MIB::wlsxChannelMisconfiguration,,,,,,  because it is using a channel that is not valid. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1059,AI-AP-MIB::wlsxOUIMisconfiguration,,,,,,  it is using an OUI that is not valid.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1060,AI-AP-MIB::wlsxSSIDMisconfiguration,,,,,,  an SSID that is not valid.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1061,AI-AP-MIB::wlsxShortPreableMisconfiguration,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1062,AI-AP-MIB::wlsxWPAMisconfiguration,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1063,AI-AP-MIB::wlsxAdhocNetworkDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1064,AI-AP-MIB::wlsxAdhocNetworkRemoved,,,,,,  longer present in the network.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1065,AI-AP-MIB::wlsxStaPolicyViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1066,AI-AP-MIB::wlsxRepeatWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1067,AI-AP-MIB::wlsxWeakWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1068,AI-AP-MIB::wlsxChannelInterferenceDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1069,AI-AP-MIB::wlsxChannelInterferenceCleared,,,,,,  is no longer present. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1070,AI-AP-MIB::wlsxAPInterferenceDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1071,AI-AP-MIB::wlsxAPInterferenceCleared,,,,,,  is no longer present. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1072,AI-AP-MIB::wlsxStaInterferenceDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1073,AI-AP-MIB::wlsxStaInterferenceCleared,,,,,,  is no longer present. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1074,AI-AP-MIB::wlsxFrameRetryRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1075,AI-AP-MIB::wlsxFrameReceiveErrorRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1076,AI-AP-MIB::wlsxFrameFragmentationRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1077,AI-AP-MIB::wlsxFrameBandWidthRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1078,AI-AP-MIB::wlsxFrameLowSpeedRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1079,AI-AP-MIB::wlsxFrameNonUnicastRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1080,AI-AP-MIB::wlsxLoadbalancingEnabled,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1081,AI-AP-MIB::wlsxLoadbalancingDisabled,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1082,AI-AP-MIB::wlsxChannelFrameRetryRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1083,AI-AP-MIB::wlsxChannelFrameFragmentationRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1084,AI-AP-MIB::wlsxChannelFrameErrorRateExceeded,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1085,AI-AP-MIB::wlsxSignatureMatchAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1086,AI-AP-MIB::wlsxSignatureMatchSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1087,AI-AP-MIB::wlsxChannelRateAnomaly,,,,,,  exceed the configured IDS rate threshold.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1088,AI-AP-MIB::wlsxNodeRateAnomalyAP,,,,,,  access point, which exceed the configured IDS rate threshold.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1089,AI-AP-MIB::wlsxNodeRateAnomalySta,,,,,,  node, which exceed the configured IDS rate threshold.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1090,AI-AP-MIB::wlsxEAPRateAnomaly,,,,,,  received by an AP has exceeded the configured IDS EAP Handshake rate threshold.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1091,AI-AP-MIB::wlsxSignalAnomaly,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1092,AI-AP-MIB::wlsxSequenceNumberAnomalyAP,,,,,,  The acceptable sequence number difference is an IDS configuration  object.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1093,AI-AP-MIB::wlsxSequenceNumberAnomalySta,,,,,,  The acceptable sequence number difference is an IDS configuration  object.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1094,AI-AP-MIB::wlsxDisconnectStationAttack,,,,,,  attack.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1095,AI-AP-MIB::wlsxApFloodAttack,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1096,AI-AP-MIB::wlsxAdhocNetwork,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1097,AI-AP-MIB::wlsxWirelessBridge,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1098,AI-AP-MIB::wlsxInvalidMacOUIAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1099,AI-AP-MIB::wlsxInvalidMacOUISta,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1100,AI-AP-MIB::wlsxWEPMisconfiguration,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1101,AI-AP-MIB::wlsxStaRepeatWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1102,AI-AP-MIB::wlsxStaWeakWEPIVViolation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1103,AI-AP-MIB::wlsxStaAssociatedToUnsecureAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1104,AI-AP-MIB::wlsxStaUnAssociatedFromUnsecureAP,,,,,,  association is no longer present.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1105,AI-AP-MIB::wlsxAdhocNetworkBridgeDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1106,AI-AP-MIB::wlsxInterferingApDetected,,,,,,  is declared Interfering because it is neither authorized or classified as Rogue. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1111,AI-AP-MIB::wlsxColdStart,,,,,,  An enterprise version of cold start trap, which contains the controller time stamp. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1112,AI-AP-MIB::wlsxWarmStart,,,,,,  An enterprise version of warm start trap, which contains the controller time stamp. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1113,AI-AP-MIB::wlsxAPImpersonation,,,,,,  The expected number is calculated based on the Beacon Interval Field in the Beacon frame.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1115,AI-AP-MIB::wlsxNAuthServerIsDown,,,,,,  This trap indicates that an authentication server is down. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1129,AI-AP-MIB::wlsxWindowsBridgeDetected,,,,,,  to a wired network
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1134,AI-AP-MIB::wlsxSignAPNetstumbler,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1135,AI-AP-MIB::wlsxSignStaNetstumbler,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1136,AI-AP-MIB::wlsxSignAPAsleap,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1137,AI-AP-MIB::wlsxSignStaAsleap,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1138,AI-AP-MIB::wlsxSignAPAirjack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1139,AI-AP-MIB::wlsxSignStaAirjack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1140,AI-AP-MIB::wlsxSignAPNullProbeResp,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1141,AI-AP-MIB::wlsxSignStaNullProbeResp,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1142,AI-AP-MIB::wlsxSignAPDeauthBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1143,AI-AP-MIB::wlsxSignStaDeauthBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1144,AI-AP-MIB::wlsxWindowsBridgeDetectedAP,,,,,,  to a wired network.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1145,AI-AP-MIB::wlsxWindowsBridgeDetectedSta,,,,,,  to a wired network.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1146,AI-AP-MIB::wlsxAdhocNetworkBridgeDetectedAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1147,AI-AP-MIB::wlsxAdhocNetworkBridgeDetectedSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1148,AI-AP-MIB::wlsxDisconnectStationAttackAP,,,,,,  attack.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1149,AI-AP-MIB::wlsxDisconnectStationAttackSta,,,,,,  attack.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1150,AI-AP-MIB::wlsxSuspectUnsecureAPDetected,,,,,, This trap indicates that an access point, classified as Suspected Rogue, has been detected by a Controller. The AP is suspected to be rogue,  with the supplied confidence level, because it was matched to  the wired MAC address. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1151,AI-AP-MIB::wlsxSuspectUnsecureAPResolved,,,,,,  Rogue, is either no longer present in the network or has changed its state.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1157,AI-AP-MIB::wlsxHtGreenfieldSupported,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1158,AI-AP-MIB::wlsxHT40MHzIntoleranceAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1159,AI-AP-MIB::wlsxHT40MHzIntoleranceSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1160,AI-AP-MIB::wlsxNAuthServerAllInService,,,,,,  This trap indicates that all authentication servers is a server group are brought back in service. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1161,AI-AP-MIB::wlsxNAdhocNetwork,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1162,AI-AP-MIB::wlsxNAdhocNetworkBridgeDetectedAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1163,AI-AP-MIB::wlsxNAdhocNetworkBridgeDetectedSta,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1170,AI-AP-MIB::wlsxClientFloodAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1171,AI-AP-MIB::wlsxValidClientNotUsingEncryption,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1172,AI-AP-MIB::wlsxAdhocUsingValidSSID,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1173,AI-AP-MIB::wlsxAPSpoofingDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1174,AI-AP-MIB::wlsxClientAssociatingOnWrongChannel,,,,,,  being spoofed in order to fool the client into thinking the AP is operating on another channel.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1175,AI-AP-MIB::wlsxNDisconnectStationAttack,,,,,,  received by that client exceeds the configured threshold.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1176,AI-AP-MIB::wlsxNStaUnAssociatedFromUnsecureAP,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1177,AI-AP-MIB::wlsxOmertaAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1178,AI-AP-MIB::wlsxTKIPReplayAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1179,AI-AP-MIB::wlsxChopChopAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1180,AI-AP-MIB::wlsxFataJackAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1181,AI-AP-MIB::wlsxInvalidAddressCombination,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1182,AI-AP-MIB::wlsxValidClientMisassociation,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1183,AI-AP-MIB::wlsxMalformedHTIEDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1184,AI-AP-MIB::wlsxMalformedAssocReqDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1185,AI-AP-MIB::wlsxOverflowIEDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1186,AI-AP-MIB::wlsxOverflowEAPOLKeyDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1187,AI-AP-MIB::wlsxMalformedFrameLargeDurationDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1188,AI-AP-MIB::wlsxMalformedFrameWrongChannelDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1189,AI-AP-MIB::wlsxMalformedAuthFrame,,,,,,  either a bad algorithm (similar to Fata-Jack) or a bad transaction.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1190,AI-AP-MIB::wlsxCTSRateAnomaly,,,,,,  received by an AP exceeds the configured IDS threshold.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1191,AI-AP-MIB::wlsxRTSRateAnomaly,,,,,,  received by an AP exceeds the configured IDS threshold.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1192,AI-AP-MIB::wlsxNRogueAPDetected,,,,,,  classified as Rogue by the system.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1193,AI-AP-MIB::wlsxNRogueAPResolved,,,,,,  This trap indicates that a previously detected access point, classified as Rogue, is either no longer present in the network or it changed its state.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1194,AI-AP-MIB::wlsxNeighborAPDetected,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1195,AI-AP-MIB::wlsxNInterferingAPDetected,,,,,,  is declared Interfering because it is not authorized, nor has it been classified as a Rogue. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1196,AI-AP-MIB::wlsxNSuspectRogueAPDetected,,,,,,  detected by the system. The AP is suspected to be rogue  with the supplied confidence level. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1197,AI-AP-MIB::wlsxNSuspectRogueAPResolved,,,,,,  Rogue, is either no longer present in the network or has changed its state.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1198,AI-AP-MIB::wlsxBlockAckAttackDetected,,,,,,  This trap indicates that an attempt has been made to deny service to the source address by spoofing a block ACK add request that sets a sequence number window outside the currently used window.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1199,AI-AP-MIB::wlsxHotspotterAttackDetected,,,,,,  This trap indicates that a new AP has appeared immediately following a client probe request. This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake hotspot or other wireless network.
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1200,AI-AP-MIB::wlsxNSignatureMatch,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1201,AI-AP-MIB::wlsxNSignatureMatchNetstumbler,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1202,AI-AP-MIB::wlsxNSignatureMatchAsleap,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1203,AI-AP-MIB::wlsxNSignatureMatchAirjack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1204,AI-AP-MIB::wlsxNSignatureMatchNullProbeResp,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1205,AI-AP-MIB::wlsxNSignatureMatchDeauthBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1206,AI-AP-MIB::wlsxNSignatureMatchDisassocBcast,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1207,AI-AP-MIB::wlsxNSignatureMatchWellenreiter,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1208,AI-AP-MIB::wlsxAPDeauthContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1209,AI-AP-MIB::wlsxClientDeauthContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1210,AI-AP-MIB::wlsxAPWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1211,AI-AP-MIB::wlsxClientWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1212,AI-AP-MIB::wlsxAPTaggedWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1213,AI-AP-MIB::wlsxClientTaggedWiredContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1214,AI-AP-MIB::wlsxTarpitContainment,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1216,AI-AP-MIB::wlsxAPChannelChange,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1217,AI-AP-MIB::wlsxAPPowerChange,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1218,AI-AP-MIB::wlsxAPModeChange,,,,,,  
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1219,AI-AP-MIB::wlsxUserEntryAttributesChanged,,,,,,  This trap indicates that the user entry attributes have changed. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1220,AI-AP-MIB::wlsxPowerSaveDosAttack,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1221,AI-AP-MIB::wlsxNAPMasterStatusChange,,,,,,  This trap indicates that the status of the AP as seen by the master controller has changed. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1222,AI-AP-MIB::wlsxNAdhocUsingValidSSID,,,,,, 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1224,AI-AP-MIB::wlsxMgmtUserAuthenticationFailed,,,,,,  This trap indicates that a management user authentication has failed. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1252,AI-AP-MIB::wlsxAPActiveUplinkChanged,,,,,, When the active uplink of an AP changes, a notification is sent to the Management Entity with the new uplink type 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1255,AI-AP-MIB::wlsxAPManagedModeConfigFailureTrap,,,,,, Indicated failure in applying config. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1256,AI-AP-MIB::wlsxNAuthServerAcctTimedOut,,,,,,  This trap indicates that the authentication server accounting timed out. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1259,AI-AP-MIB::wlsxPortalServerDown,,,,,,  This trap indicates that the portal server is down. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1260,AI-AP-MIB::wlsxPortalServerUp,,,,,,  This trap indicates that the portal server is up. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1262,AI-AP-MIB::wlsxIAPVoiceClientLocationUpdate,,,,,,  The trap represents a IAP voice client location update. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1267,AI-AP-MIB::wlsxWPAFTAttack,,,,,, This trap indicates there is a possible attack of the Fast BSS Transition causing a WPA key re-installation. This can be indicative of a security breach where an attacker can hijack a client's association and/or decrypt an otherwise secure connection. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1268,AI-AP-MIB::wlsxMitMDetected,,,,,, This trap indicates that an AP detected a possible channel-based Man in the Middle attack by someone using spoofed beacons with an invalid Channel Switch Announcement. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1271,AI-AP-MIB::wlsxAPLoopDetected,,,,,,  This trap indicates that loop is detected on AP's secure jack port. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1272,AI-AP-MIB::wlsxAPBROADCASTSTORM,,,,,,  This trap indicates that broadcast storm is detected on AP's secure jack port. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1274,AI-AP-MIB::wlsxCLEARPASSSERVERINVALID,,,,,,  This trap indicates that clearpass server is not valid when using the CA to verity the server for download-role. 
.1.3.6.1.4.1.14823.2.3.3.1.200.2.1277,AI-AP-MIB::wlsxAPUSBPLUGALARM,,,,,,  This trap indicates that an USB device is plugged in or out to an AP. 
.1.3.6.1.4.1.14823.2.4,ARUBA-MIB::arubaEcs,,,,,,
.1.3.6.1.4.1.14823.3,ARUBA-MIB::arubaMgmt,,,,,,
.1.3.6.1.4.1.14823.3.3,ARUBA-MGMT-MIB::arubaMgmtExtensions,,,,,,A MIB module for supporting the Aruba Management 
.1.3.6.1.4.1.14823.3.3.1,ARUBA-MGMT-MIB::arubaMgmtGroup,,,,,,
.1.3.6.1.4.1.14823.3.3.1.1,ARUBA-MGMT-MIB::arubaGetTable,OBJECT,not-accessible,,current,, 
.1.3.6.1.4.1.14823.3.3.1.2,ARUBA-MGMT-MIB::arubaNumberOfRows,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.3.3.1.3,ARUBA-MGMT-MIB::arubaRowInstance,OBJECT,not-accessible,,current,, 
.1.3.6.1.4.1.14823.3.3.1.4,ARUBA-MGMT-MIB::arubaGetTableStatus,INTEGER,not-accessible,,current,endTable(1):moreTable(2):retrieveError(3):noAmpSupport(4):invalidColumnID(5):resourceAllocationFailure(6), 
.1.3.6.1.4.1.14823.3.3.1.5,ARUBA-MGMT-MIB::arubaNumberOfColumns,Integer32,not-accessible,,current,, 
.1.3.6.1.4.1.14823.3.3.1.6,ARUBA-MGMT-MIB::arubaSwitchAMPSupport,INTEGER,read-only,,current,enabled(1):disabled(2), 
.1.3.6.1.4.1.14823.4,ARUBA-MIB::arubaPki,,,,,,Aruba PKI OIDs. This arc is not used in Aruba SNMP MIBs.
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
.1.3.6.1.6.3.1,SNMPv2-MIB::snmpMIB,,,,,,The MIB module for SNMP entities. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3418; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.1.1,SNMPv2-MIB::snmpMIBObjects,,,,,,
.1.3.6.1.6.3.1.1.4,SNMPv2-MIB::snmpTrap,,,,,,
.1.3.6.1.6.3.1.1.4.1,SNMPv2-MIB::snmpTrapOID,OBJECT,accessible-for-notify,,current,,The authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU.
.1.3.6.1.6.3.1.1.4.3,SNMPv2-MIB::snmpTrapEnterprise,OBJECT,accessible-for-notify,,current,,The authoritative identification of the enterprise associated with the trap currently being sent. When an SNMP proxy agent is mapping an RFC1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind.
.1.3.6.1.6.3.1.1.5,SNMPv2-MIB::snmpTraps,,,,,,
.1.3.6.1.6.3.1.1.5.1,SNMPv2-MIB::coldStart,,,,,,A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
.1.3.6.1.6.3.1.1.5.2,SNMPv2-MIB::warmStart,,,,,,A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.1.5.3,IF-MIB::linkDown,,,,,,A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.4,IF-MIB::linkUp,,,,,,A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.5,SNMPv2-MIB::authenticationFailure,,,,,,An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
.1.3.6.1.6.3.1.1.6,SNMPv2-MIB::snmpSet,,,,,,
.1.3.6.1.6.3.1.1.6.1,SNMPv2-MIB::snmpSetSerialNo,INTEGER,read-write,,current,,An advisory lock used to allow several cooperating command generator applications to coordinate their use of the SNMP set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.
.1.3.6.1.6.3.1.2,SNMPv2-MIB::snmpMIBConformance,,,,,,
.1.3.6.1.6.3.1.2.1,SNMPv2-MIB::snmpMIBCompliances,,,,,,
.1.3.6.1.6.3.1.2.1.2,SNMPv2-MIB::snmpBasicCompliance,,,,,,The compliance statement for SNMPv2 entities which implement the SNMPv2 MIB. This compliance statement is replaced by snmpBasicComplianceRev2.
.1.3.6.1.6.3.1.2.1.3,SNMPv2-MIB::snmpBasicComplianceRev2,,,,,,The compliance statement for SNMP entities which implement this MIB module.
.1.3.6.1.6.3.1.2.2,SNMPv2-MIB::snmpMIBGroups,,,,,,
.1.3.6.1.6.3.1.2.2.5,SNMPv2-MIB::snmpSetGroup,,,,,,A collection of objects which allow several cooperating command generator applications to coordinate their use of the set operation.
.1.3.6.1.6.3.1.2.2.6,SNMPv2-MIB::systemGroup,,,,,,The system group defines objects which are common to all managed systems.
.1.3.6.1.6.3.1.2.2.7,SNMPv2-MIB::snmpBasicNotificationsGroup,,,,,,The basic notifications implemented by an SNMP entity supporting command responder applications.
.1.3.6.1.6.3.1.2.2.8,SNMPv2-MIB::snmpGroup,,,,,,A collection of objects providing basic instrumentation and control of an SNMP entity.
.1.3.6.1.6.3.1.2.2.9,SNMPv2-MIB::snmpCommunityGroup,,,,,,A collection of objects providing basic instrumentation of a SNMP entity which supports community-based authentication.
.1.3.6.1.6.3.1.2.2.10,SNMPv2-MIB::snmpObsoleteGroup,,,,,,A collection of objects from RFC 1213 made obsolete by this MIB module.
.1.3.6.1.6.3.1.2.2.11,SNMPv2-MIB::snmpWarmStartNotificationGroup,,,,,,An additional notification for an SNMP entity supporting command responder applications, if it is able to reinitialize itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.2.2.12,SNMPv2-MIB::snmpNotificationGroup,,,,,,These objects are required for entities which support notification originator applications.
.1.3.6.1.6.3.10,SNMP-FRAMEWORK-MIB::snmpFrameworkMIB,,,,,,The SNMP Management Architecture MIB Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3411; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.10.1,SNMP-FRAMEWORK-MIB::snmpFrameworkAdmin,,,,,,
.1.3.6.1.6.3.10.1.1,SNMP-FRAMEWORK-MIB::snmpAuthProtocols,,,,,,Registration point for standards-track authentication protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.1.2,SNMP-FRAMEWORK-MIB::snmpPrivProtocols,,,,,,Registration point for standards-track privacy protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBObjects,,,,,,
.1.3.6.1.6.3.10.2.1,SNMP-FRAMEWORK-MIB::snmpEngine,,,,,,
.1.3.6.1.6.3.10.2.1.1,SNMP-FRAMEWORK-MIB::snmpEngineID,OCTET,read-only,,current,,An SNMP engine's administratively-unique identifier. This information SHOULD be stored in non-volatile storage so that it remains constant across re-initializations of the SNMP engine. 
.1.3.6.1.6.3.10.2.1.2,SNMP-FRAMEWORK-MIB::snmpEngineBoots,INTEGER,read-only,,current,,The number of times that the SNMP engine has (re-)initialized itself since snmpEngineID was last configured. 
.1.3.6.1.6.3.10.2.1.3,SNMP-FRAMEWORK-MIB::snmpEngineTime,INTEGER,read-only,,current,,The number of seconds since the value of the snmpEngineBoots object last changed. When incrementing this object's value would cause it to exceed its maximum, snmpEngineBoots is incremented as if a re-initialization had occurred, and this object's value consequently reverts to zero. 
.1.3.6.1.6.3.10.2.1.4,SNMP-FRAMEWORK-MIB::snmpEngineMaxMessageSize,INTEGER,read-only,,current,,The maximum length in octets of an SNMP message which this SNMP engine can send or receive and process, determined as the minimum of the maximum message size values supported among all of the transports available to and supported by the engine. 
.1.3.6.1.6.3.10.3,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBConformance,,,,,,
.1.3.6.1.6.3.10.3.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliances,,,,,,
.1.3.6.1.6.3.10.3.1.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance,,,,,,The compliance statement for SNMP engines which implement the SNMP Management Framework MIB. 
.1.3.6.1.6.3.10.3.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBGroups,,,,,,
.1.3.6.1.6.3.10.3.2.1,SNMP-FRAMEWORK-MIB::snmpEngineGroup,,,,,,A collection of objects for identifying and determining the configuration and current timeliness values of an SNMP engine. 
