.1.3,RFC1155-SMI::org,,,,,,
.1.3.6,RFC1155-SMI::dod,,,,,,
.1.3.6.1,RFC1155-SMI::internet,,,,,,
.1.3.6.1.1,RFC1155-SMI::directory,,,,,,
.1.3.6.1.2,RFC1155-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.3,RFC1155-SMI::experimental,,,,,,
.1.3.6.1.4,RFC1155-SMI::private,,,,,,
.1.3.6.1.4.1,RFC1155-SMI::enterprises,,,,,,
.1.3.6.1.4.1.298,ASANTE-AH1012-MIB::asante,,,,,,
.1.3.6.1.4.1.298.0,ASANTE-SWITCH-MIB::asante#,,,,,,
.1.3.6.1.4.1.298.0.3,ASANTE-SWITCH-MIB::eSWFanFail,,,,,,The SNMP trap that is generated when a fan in
.1.3.6.1.4.1.298.0.4,ASANTE-SWITCH-MIB::eSWExpPortConnectStateChange,,,,,,This trap will be sent when an MII module is
.1.3.6.1.4.1.298.0.5,ASANTE-SWITCH-MIB::eSWIPSpoofing,,,,,,This trap is caused by the detection of a
.1.3.6.1.4.1.298.0.6,ASANTE-SWITCH-MIB::eSWStationMove,,,,,,The trap is caused by the detection of station
.1.3.6.1.4.1.298.0.7,ASANTE-SWITCH-MIB::eSWNewNodeDetected,,,,,,The trap is generated when any port which is set
.1.3.6.1.4.1.298.0.8,ASANTE-SWITCH-MIB::eSWIntruderDetected,,,,,,The trap is generated when any port which is
.1.3.6.1.4.1.298.0.9,ASANTE-SWITCH-MIB::eSWIntruderPortDisable,,,,,,The trap is generated when any port which is
.1.3.6.1.4.1.298.0.10,ASANTE-SWITCH-MIB::eSWEnhIPSpoofing,,,,,,This trap is caused by the detection of a
.1.3.6.1.4.1.298.0.11,ASANTE-SWITCH-MIB::eSWEnhStationMove,,,,,,The trap is caused by the detection of station
.1.3.6.1.4.1.298.0.12,ASANTE-SWITCH-MIB::eSWEnhNewNodeDetected,,,,,,The trap is generated when any port which is set
.1.3.6.1.4.1.298.0.13,ASANTE-SWITCH-MIB::eSWEnhIntruderDetected,,,,,,The trap is generated when any secured port
.1.3.6.1.4.1.298.0.14,ASANTE-SWITCH-MIB::eSWEnhIntruderPortDisable,,,,,,The trap is generated when any port which is
.1.3.6.1.4.1.298.1,ASANTE-AH1012-MIB::products,,,,,,
.1.3.6.1.4.1.298.1.1,ASANTE-AH1012-MIB::snmpAgent,,,,,,
.1.3.6.1.4.1.298.1.1.1,ASANTE-AH1012-MIB::agentSw,,,,,,
.1.3.6.1.4.1.298.1.1.1.1,ASANTE-AH1012-MIB::agentRunTimeImageMajorVer,INTEGER,read-only,,mandatory,,The major software version number of the agent  run time image.
.1.3.6.1.4.1.298.1.1.1.2,ASANTE-AH1012-MIB::agentRunTimeImageMinorVer,INTEGER,read-only,,mandatory,,The minor software version number of the agent  run time image.
.1.3.6.1.4.1.298.1.1.1.3,ASANTE-AH1012-MIB::agentImageLoadMode,INTEGER,read-write,,mandatory,other(1):localBoot(2):netBoot(3),Tells hub whether the software image is to be  loaded from the FLASH EPROM or from over the network.
.1.3.6.1.4.1.298.1.1.1.4,ASANTE-AH1012-MIB::agentRemoteBootInfo,INTEGER,read-only,,mandatory,other(1):eepromBootInfo(2),The method for getting boot parameter information.
.1.3.6.1.4.1.298.1.1.1.5,ASANTE-AH1012-MIB::agentRemoteBootProtocol,INTEGER,read-write,,mandatory,other(1):bootp-tftp(2):tftp-only(3),The netboot protocol that used to load the  agent software.
.1.3.6.1.4.1.298.1.1.1.6,ASANTE-AH1012-MIB::agentRemoteBootFile,OCTET,read-write,,mandatory,,The boot file name that is sent to the boot file  server by agent boot code during boot time.
.1.3.6.1.4.1.298.1.1.1.7,ASANTE-AH1012-MIB::agentOutBandDialString,OCTET,read-write,,mandatory,,This is the initialization string used by the  Network Management station to establish the  out-of-band connection for modem only.
.1.3.6.1.4.1.298.1.1.1.8,ASANTE-AH1012-MIB::agentOutBandBaudRate,INTEGER,read-write,,mandatory,other(1):b1200(2):b2400(3):b4800(4):b9600(5),The baud rate setting for the out-of-band  port.
.1.3.6.1.4.1.298.1.1.1.9,ASANTE-AH1012-MIB::agentReset,INTEGER,read-write,,mandatory,other(1):reset(2):not-reset(3),The object to allow software to perform  'push_button' system reset.
.1.3.6.1.4.1.298.1.1.2,ASANTE-AH1012-MIB::agentFw,,,,,,
.1.3.6.1.4.1.298.1.1.2.1,ASANTE-AH1012-MIB::agentFwMajorVer,INTEGER,read-only,,mandatory,,The major firmware version number of the agent  prom code.
.1.3.6.1.4.1.298.1.1.2.2,ASANTE-AH1012-MIB::agentFwMinorVer,INTEGER,read-only,,mandatory,,The minor firmware version number of the agent  prom code.
.1.3.6.1.4.1.298.1.1.3,ASANTE-AH1012-MIB::agentHw,,,,,,
.1.3.6.1.4.1.298.1.1.3.1,ASANTE-AH1012-MIB::agentHwReVer,INTEGER,read-only,,mandatory,,The hardware reversion number of the network  management module.
.1.3.6.1.4.1.298.1.1.3.2,ASANTE-AH1012-MIB::agentHwVer,INTEGER,read-only,,mandatory,,The hardware model number of the network  management module
.1.3.6.1.4.1.298.1.1.4,ASANTE-AH1012-MIB::agentNetProtoStkCapMap,OCTET,read-only,,mandatory,,This octet string represents the current  protocol stack configuration supported  by the agent, encoded as a bit string.  Each protocol stack is represented  by a single bit. When the value of a  bit = 1, it indicates that the protocol  stack on the agent represented by that  bit is supported; when zero, the protocol  stack is not supported. The number of  octets in the string is always integer  multiple of the octet. The first protocol  stack will encode in the least significant  bit of the first octet. Current, only  IP Stack(bit 0) and IPX Stack(bit 1) were  defined, all other bits should be zero.
.1.3.6.1.4.1.298.1.1.5,ASANTE-AH1012-MIB::agentNetProtocol,,,,,,
.1.3.6.1.4.1.298.1.1.5.1,ASANTE-AH1012-MIB::ipagentProtocol,,,,,,
.1.3.6.1.4.1.298.1.1.5.1.1,ASANTE-AH1012-MIB::ipagentIpAddr,IpAddress,read-write,,mandatory,,The ipagent's administrative IP address. The  current operational IP address can be obtained  from the ipAdEntAddr in the ipAddrTable. This  parameter will take effect only after reset hub.  This parameter will always be updated in the  EEPROM.
.1.3.6.1.4.1.298.1.1.5.1.2,ASANTE-AH1012-MIB::ipagentIpNetMask,IpAddress,read-write,,mandatory,,The ipagent's administrative IP subnet mask. The  current operational IP subnet mask can be obtained  from the ipAdEntMask in the ipAddrTable. This  parameter will take effect only after reset hub.  This parameter will always be updated in the  EEPROM.
.1.3.6.1.4.1.298.1.1.5.1.3,ASANTE-AH1012-MIB::ipagentDefaultGateway,IpAddress,read-write,,mandatory,,The ipagent's administrative default gateway IP  address. The current operational IP default  gateway IP address can be obtained from the  ipRouteDest in the ipRouteTable. This parameter  will take effect only after reset hub. This  parameter will always be updated in the EEPROM.
.1.3.6.1.4.1.298.1.1.5.1.4,ASANTE-AH1012-MIB::ipagentBootServerAddr,IpAddress,read-write,,mandatory,,The IP address of the boot server that was used  for booting this ipagent. This parameter will  always be updated in the EEPROM.
.1.3.6.1.4.1.298.1.1.5.1.5,ASANTE-AH1012-MIB::ipagentUnAuthIP,IpAddress,read-only,,mandatory,,The IP address of the last station that tried to  access this ipagent with an invalid community  string.
.1.3.6.1.4.1.298.1.1.5.1.6,ASANTE-AH1012-MIB::ipagentUnAuthComm,OCTET,read-only,,mandatory,,The community string of the last station that tried  to access this ipagent with an invalid community  string.
.1.3.6.1.4.1.298.1.1.5.2,ASANTE-AH1012-MIB::ipagentTrapRcvrTable,,not-accessible,,mandatory,,Table consisting of the list of Network Management  Stations that are to receive traps generated by this  agent.
.1.3.6.1.4.1.298.1.1.5.2.1,ASANTE-AH1012-MIB::ipagentTrapRcvrEntry,,not-accessible,ipagentTrapRcvrIpAddr,mandatory,,Destination IP address and community string for  a particular trap server. 
.1.3.6.1.4.1.298.1.1.5.2.1.1,ASANTE-AH1012-MIB::ipagentTrapRcvrIpAddr,IpAddress,read-only,,mandatory,,IP address for trap server receiving trap. 
.1.3.6.1.4.1.298.1.1.5.2.1.2,ASANTE-AH1012-MIB::ipagentTrapRcvrStatus,INTEGER,read-write,,mandatory,other(1):valid(2):invalid(3),Validation of individual trap receiver. If value  of this object is set to invalid(3), then that  particular entry is deemed invalid, meaning that  the address for that entry is no longer valid  because the entry has been removed from the table.
.1.3.6.1.4.1.298.1.1.5.2.1.3,ASANTE-AH1012-MIB::ipagentTrapRcvrComm,OCTET,read-write,,mandatory,,Community string for traps sent to this trap  receiver.
.1.3.6.1.4.1.298.1.2,ASANTE-AH1012-MIB::adaptCard,,,,,,
.1.3.6.1.4.1.298.1.3,ASANTE-AH1012-MIB::concentrator,,,,,,
.1.3.6.1.4.1.298.1.3.1,ASANTE-AH1012-MIB::concChassis,,,,,,
.1.3.6.1.4.1.298.1.3.1.1,ASANTE-AH1012-MIB::concBasicGrp,,,,,,
.1.3.6.1.4.1.298.1.3.1.1.1,ASANTE-AH1012-MIB::concChassisType,INTEGER,read-only,,mandatory,other(1):aH1012(2),The concentrator's chassis type.
.1.3.6.1.4.1.298.1.3.1.1.2,ASANTE-AH1012-MIB::concChassisBkplType,INTEGER,read-only,,mandatory,other(1):no-backplane(2),The concentrator's chassis backplane type.
.1.3.6.1.4.1.298.1.3.1.1.3,ASANTE-AH1012-MIB::concChassisBkplRev,INTEGER,read-only,,mandatory,,The concentrator's chassis backplane  revision number.
.1.3.6.1.4.1.298.1.3.1.1.4,ASANTE-AH1012-MIB::concChassisPsTable,,not-accessible,,mandatory,,This table contains concentrator's power supply  information.
.1.3.6.1.4.1.298.1.3.1.1.4.1,ASANTE-AH1012-MIB::concChassisPsEntry,,not-accessible,concChassisPsIndex,mandatory,,The entry in the table containing the information  about a single power supply.
.1.3.6.1.4.1.298.1.3.1.1.4.1.1,ASANTE-AH1012-MIB::concChassisPsIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the  power supply table for which this entry  contains power supply type and status.
.1.3.6.1.4.1.298.1.3.1.1.4.1.2,ASANTE-AH1012-MIB::concChassisPsModuleType,INTEGER,read-only,,mandatory,other(1),The value of this object identifies the  power supply module type.
.1.3.6.1.4.1.298.1.3.1.1.4.1.3,ASANTE-AH1012-MIB::concChassisPsStatus,INTEGER,read-only,,mandatory,other(1):good(2):bad(3),The value of this object identifies the  power supply module status.
.1.3.6.1.4.1.298.1.3.1.1.5,ASANTE-AH1012-MIB::concChassisFanStatus,INTEGER,read-only,,mandatory,other(1):no-fan(2):good(3):bad(4),The value of this object identifies the  fan status.
.1.3.6.1.4.1.298.1.3.1.1.6,ASANTE-AH1012-MIB::concChassisGroupCapacity,INTEGER,read-only,,mandatory,,The number of groups that can be contained within  the concentrator. 
.1.3.6.1.4.1.298.1.3.1.1.7,ASANTE-AH1012-MIB::concChassisGroupMap,OCTET,read-only,,mandatory,,This octet string represents the current  configuration of groups, encoded as a bit string,  each group is represented by a single bit.
.1.3.6.1.4.1.298.1.3.1.1.8,ASANTE-AH1012-MIB::concChassisGrpTable,,not-accessible,,mandatory,,A table that contains information about the  group/slot in this chassis.
.1.3.6.1.4.1.298.1.3.1.1.8.1,ASANTE-AH1012-MIB::concChassisGrpEntry,,not-accessible,concChassisGrpIndex,mandatory,,A list of information for each slot in this chassis.
.1.3.6.1.4.1.298.1.3.1.1.8.1.1,ASANTE-AH1012-MIB::concChassisGrpIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the  chassis group table for which this entry  contains group related information.
.1.3.6.1.4.1.298.1.3.1.1.8.1.2,ASANTE-AH1012-MIB::concChassisGrpNumberPort,INTEGER,read-only,,mandatory,,The number of port is available for up/down link  within this group.
.1.3.6.1.4.1.298.1.3.1.1.8.1.3,ASANTE-AH1012-MIB::concChassisGrpType,INTEGER,read-only,,mandatory,,The value represents the function of this group.
.1.3.6.1.4.1.298.1.3.1.1.8.1.4,ASANTE-AH1012-MIB::concChassisGrpDescr,OCTET,read-only,,mandatory,,A description of this group device.
.1.3.6.1.4.1.298.1.3.1.1.8.1.5,ASANTE-AH1012-MIB::concChassisGrpHwRev,INTEGER,read-only,,mandatory,,The hardware revision number of this particular  group.
.1.3.6.1.4.1.298.1.3.2,ASANTE-AH1012-MIB::concConfiguration,,,,,,
.1.3.6.1.4.1.298.1.3.2.1,ASANTE-AH1012-MIB::eSmartHubConfig,,,,,,
.1.3.6.1.4.1.298.1.3.2.1.1,ASANTE-AH1012-MIB::eSmartHubId,OCTET,read-only,,mandatory,,Hub MAC address (octet string) found from prom  chip in hub.
.1.3.6.1.4.1.298.1.3.2.1.2,ASANTE-AH1012-MIB::eSmartHubAssignedId,INTEGER,read-only,,mandatory,,Assigned hub ID for Out-of-Band.
.1.3.6.1.4.1.298.1.3.2.1.3,ASANTE-AH1012-MIB::eSmartHubTerSwitch,INTEGER,read-only,,mandatory,other(1):terminal(2):pc-modem(3),Status of position of PC/terminal switch located on  rear panel of hub. Switches between serial and  parallel communications for modem/PC or terminal  connection to RS-232 Port. Up (off) for PC,  down (on) for terminal. If position of switch is  changed, there will be no change in this status  until hub is reset.
.1.3.6.1.4.1.298.1.3.2.1.4,ASANTE-AH1012-MIB::eSmartHubHwLoadPatStatus,INTEGER,read-write,,mandatory,,Which logic configuration pattern is loaded into the Programmable Logic Device PLD.
.1.3.6.1.4.1.298.1.3.2.1.5,ASANTE-AH1012-MIB::eSmartHubHwLoadPatCapacity,OCTET,read-only,,mandatory,,What kind of function the PLD can perform.
.1.3.6.1.4.1.298.1.3.2.1.6,ASANTE-AH1012-MIB::eSmartHubNodeAgeTimer,INTEGER,read-write,,mandatory,,How long to keep node entry in node summary  table, measured in sec. The maximum is 11 hours.
.1.3.6.1.4.1.298.1.3.2.1.7,ASANTE-AH1012-MIB::eSmartHub3in1LnConStatus,INTEGER,read-only,,mandatory,other(1):uTP(2):aUI(3):uTP-and-AUI(4),Status of 3In1 Uplink which is located on rear  panel of hub. Describes the physical link type  or types currently connected.
.1.3.6.1.4.1.298.1.3.2.1.8,ASANTE-AH1012-MIB::eSmartHub3in1StateCtrl,INTEGER,read-write,,mandatory,other(1):uTP(2):bNC(3):aUI(4):auto(5),Whether using Auto-sense or manually selected a  particular media type for the uplink connection. If  using Auto-sense it first tries AUI. If  AUI is not present then 10T. If neither AUI nor  10T is present, then it defaults to BNC.
.1.3.6.1.4.1.298.1.3.3,ASANTE-AH1012-MIB::concStatistics,,,,,,
.1.3.6.1.4.1.298.1.3.3.1,ASANTE-AH1012-MIB::eStatistics,,,,,,
.1.3.6.1.4.1.298.1.3.3.1.1,ASANTE-AH1012-MIB::eGlobalStatistics,,,,,,
.1.3.6.1.4.1.298.1.3.3.1.1.1,ASANTE-AH1012-MIB::eGlobalHubReadableFrames,Counter32,read-only,,mandatory,,Global counter of good or readable frames for this  hub. Frame is between 64 and 1518 bytes in  length and has SFD and good FCS.
.1.3.6.1.4.1.298.1.3.3.1.1.2,ASANTE-AH1012-MIB::eGlobalHubMcastFrames,Counter32,read-only,,mandatory,,Global counter of number of multicast frames for  this hub. 1st bit in highest ordered bytes of  destination address is set to 1. Broadcast packets  are not included.
.1.3.6.1.4.1.298.1.3.3.1.1.3,ASANTE-AH1012-MIB::eGlobalHubBcastFrames,Counter32,read-only,,mandatory,,Global counter of number of broadcast frames for  his hub. All 1s in network destination address.  Multicast packets are not included.
.1.3.6.1.4.1.298.1.3.3.1.1.4,ASANTE-AH1012-MIB::eGlobalHubFrameTooLongs,Counter32,read-only,,mandatory,,Global counter, for this hub, of data frames  longer than 1518 bytes, with a SFD and good FCS.
.1.3.6.1.4.1.298.1.3.3.1.1.5,ASANTE-AH1012-MIB::eGlobalHubRunts,Counter32,read-only,,mandatory,,Global counter, for this hub, of data frames with  size less than 64 bytes, with no CRC or alignment  errors. 
.1.3.6.1.4.1.298.1.3.3.1.1.6,ASANTE-AH1012-MIB::eGlobalHubAlignmentErrors,Counter32,read-only,,mandatory,,Global counter, for this hub, of frames which  are not integer multiples of 1 byte.
.1.3.6.1.4.1.298.1.3.3.1.1.7,ASANTE-AH1012-MIB::eGlobalHubFragmentErrors,Counter32,read-only,,mandatory,,Global counter, for this hub, of frames greater than 2 bytes and less than 64 bytes, with SFD and bad  FCS (CRC error).
.1.3.6.1.4.1.298.1.3.3.1.1.8,ASANTE-AH1012-MIB::eGlobalHubFCSErrors,Counter32,read-only,,mandatory,,Global counter, for this hub, of frames that  failed Cyclic Redundancy Check (CRC).
.1.3.6.1.4.1.298.1.3.3.1.1.9,ASANTE-AH1012-MIB::eGlobalHubIFGErrors,Counter32,read-only,,mandatory,,Global counter, for this hub, of occurrences of  Interframe Gap Errors where time period between  data frames is less than 5.5 micro seconds.
.1.3.6.1.4.1.298.1.3.3.1.1.10,ASANTE-AH1012-MIB::eGlobalHubDataRateMismatchs,Counter32,read-only,,mandatory,,Global counter, for this hub, of errors where  incoming data rate is not with in the tolerance  level of 10MHZ + or - 0.01%.
.1.3.6.1.4.1.298.1.3.3.1.1.11,ASANTE-AH1012-MIB::eGlobalHubShortEvents,Counter32,read-only,,mandatory,,Global counter, for this hub, of data burst where  data is less than 10 bytes in length, with no  SFD.
.1.3.6.1.4.1.298.1.3.3.1.1.12,ASANTE-AH1012-MIB::eGlobalHubCollisions,Counter32,read-only,,mandatory,,Global counter of collision flags, for this hub.
.1.3.6.1.4.1.298.1.3.3.1.1.13,ASANTE-AH1012-MIB::eGlobalHubLateCollisions,Counter32,read-only,,mandatory,,Global counter, for this hub, of collisions  occurring after the 64 byte collision window.
.1.3.6.1.4.1.298.1.3.3.1.1.14,ASANTE-AH1012-MIB::eGlobalHubMJLPs,Counter32,read-only,,mandatory,,Global counter of MAU jabber lockup protection  where hub repeater chip goes into lockup state.
.1.3.6.1.4.1.298.1.3.3.1.1.15,ASANTE-AH1012-MIB::eGlobalHubAutoPartitions,Counter32,read-only,,mandatory,,Global counter, for this hub, of all ports including 3in1 port being partitioned from network in  response to 31 or more continuous collisions.
.1.3.6.1.4.1.298.1.3.3.1.1.16,ASANTE-AH1012-MIB::eGlobalHubSFDMissings,Counter32,read-only,,mandatory,,Global counter, for this hub, of a burst of data  greater than or equal to 10 bytes in length with  no SFD.
.1.3.6.1.4.1.298.1.3.3.1.1.17,ASANTE-AH1012-MIB::eGlobalHubBadFrames,Counter32,read-only,,mandatory,,Global counter, for this hub, of total errored frame including toolong, runts, misaligned, or bad FCS.
.1.3.6.1.4.1.298.1.3.3.1.3,ASANTE-AH1012-MIB::eGrpStatisticsTable,,not-accessible,,mandatory,,Table of statistical information for each group.
.1.3.6.1.4.1.298.1.3.3.1.3.1,ASANTE-AH1012-MIB::eGrpStatisticsEntry,,not-accessible,eGrpStatIndex,mandatory,,Entry for individual group in table.
.1.3.6.1.4.1.298.1.3.3.1.3.1.1,ASANTE-AH1012-MIB::eGrpStatIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the group  for which this entry contains group statistical  information.
.1.3.6.1.4.1.298.1.3.3.1.3.1.2,ASANTE-AH1012-MIB::eGrpStatReadableFrames,Counter32,read-only,,mandatory,,Group counter of 'good' or readable frames. Frame  is between 64 and 1518 bytes in length and  has SFD and good FCS.
.1.3.6.1.4.1.298.1.3.3.1.3.1.3,ASANTE-AH1012-MIB::eGrpStatMcastFrames,Counter32,read-only,,mandatory,,Group counter of number of muliticast frames.  1st bit in highest ordered bytes of destination  address is set to 1. Broadcast packets are not  included.
.1.3.6.1.4.1.298.1.3.3.1.3.1.4,ASANTE-AH1012-MIB::eGrpStatBcastFrames,Counter32,read-only,,mandatory,,Group counter of number of broadcast frames. All  1s in network destination address. Multicast  packets are not included.
.1.3.6.1.4.1.298.1.3.3.1.3.1.5,ASANTE-AH1012-MIB::eGrpStatFrameTooLongs,Counter32,read-only,,mandatory,,Group counter for data frames longer than 1518  bytes, with a SFD and good FCS. 
.1.3.6.1.4.1.298.1.3.3.1.3.1.6,ASANTE-AH1012-MIB::eGrpStatRunts,Counter32,read-only,,mandatory,,Group counter for data frames with size less than  64 bytes, with no CRC or alignment errors.
.1.3.6.1.4.1.298.1.3.3.1.3.1.7,ASANTE-AH1012-MIB::eGrpStatAlignmentErrors,Counter32,read-only,,mandatory,,Group counter of frames which are not integer  multiples of 1 byte .
.1.3.6.1.4.1.298.1.3.3.1.3.1.8,ASANTE-AH1012-MIB::eGrpStatFragmentErrors,Counter32,read-only,,mandatory,,Group counter of frames greater than 2 bytes and  less than 64 bytes, with SFD and bad FCS  (CRC error).
.1.3.6.1.4.1.298.1.3.3.1.3.1.9,ASANTE-AH1012-MIB::eGrpStatFCSErrors,Counter32,read-only,,mandatory,,Group counter frames that failed Cyclic  Redundancy Check (CRC).
.1.3.6.1.4.1.298.1.3.3.1.3.1.10,ASANTE-AH1012-MIB::eGrpStatIFGErrors,Counter32,read-only,,mandatory,,Group counter of Interframe Gap Errors  where time period between data frames is less than  5.5 micro seconds.
.1.3.6.1.4.1.298.1.3.3.1.3.1.11,ASANTE-AH1012-MIB::eGrpStatDataRateMismatchs,Counter32,read-only,,mandatory,,Group counter of errors where incoming data rate  is not with in the tolerance level of  10 MHZ + or - 0.01%.
.1.3.6.1.4.1.298.1.3.3.1.3.1.12,ASANTE-AH1012-MIB::eGrpStatShortEvents,Counter32,read-only,,mandatory,,Group counter of data burst where data is less than  10 bytes in length, with no SFD.
.1.3.6.1.4.1.298.1.3.3.1.3.1.13,ASANTE-AH1012-MIB::eGrpStatCollisions,Counter32,read-only,,mandatory,,Group counter of collision flags.
.1.3.6.1.4.1.298.1.3.3.1.3.1.14,ASANTE-AH1012-MIB::eGrpStatLateCollisions,Counter32,read-only,,mandatory,,Group counter of collisions occurring after the 64  byte collision window.
.1.3.6.1.4.1.298.1.3.3.1.3.1.15,ASANTE-AH1012-MIB::eGrpStatMJLPs,Counter32,read-only,,mandatory,,Group counter of MAU jabber lockup protection  where hub repeater chip goes into lockup state.
.1.3.6.1.4.1.298.1.3.3.1.3.1.16,ASANTE-AH1012-MIB::eGrpStatAutoPartitions,Counter32,read-only,,mandatory,,Group counter of ports in group autopartitioned in  response to 31 or more continuous collisions.
.1.3.6.1.4.1.298.1.3.3.1.3.1.17,ASANTE-AH1012-MIB::eGrpStatSFDMissings,Counter32,read-only,,mandatory,,Group counter of a burst of data greater than or  equal to 10 bytes in length with no SFD.
.1.3.6.1.4.1.298.1.3.3.1.3.1.18,ASANTE-AH1012-MIB::eGrpStatBadFrames,Counter32,read-only,,mandatory,,Group counter of total errored frames including  toolong, runts, misaligned, or bad FCS.
.1.3.6.1.4.1.298.1.3.3.1.4,ASANTE-AH1012-MIB::ePortStatisticsTable,,not-accessible,,mandatory,,Table for port specific network statistics.
.1.3.6.1.4.1.298.1.3.3.1.4.1,ASANTE-AH1012-MIB::ePortStatisticsEntry,,not-accessible,ePortGrpIndex:ePortIndex,mandatory,,Entry for individual port in table.
.1.3.6.1.4.1.298.1.3.3.1.4.1.1,ASANTE-AH1012-MIB::ePortGrpIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the group for  which this entry contains port statistical  information.
.1.3.6.1.4.1.298.1.3.3.1.4.1.2,ASANTE-AH1012-MIB::ePortIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the port for  which this entry contains port statistical  information.
.1.3.6.1.4.1.298.1.3.3.1.4.1.3,ASANTE-AH1012-MIB::ePortStatReadableFrames,Counter32,read-only,,mandatory,,Port counter of good or readable frames. Frame is  between 64 and 1518 bytes in length and  has SFD and good FCS.
.1.3.6.1.4.1.298.1.3.3.1.4.1.4,ASANTE-AH1012-MIB::ePortStatMcastFrames,Counter32,read-only,,mandatory,,Port counter of number of muliticast frames. 1st  bit in highest ordered bytes of destination address  is set to 1. Broadcast packets are not included.
.1.3.6.1.4.1.298.1.3.3.1.4.1.5,ASANTE-AH1012-MIB::ePortStatBcastFrames,Counter32,read-only,,mandatory,,Port counter of number of broadcast frames. All  1s in network destination address. Multicast  packets are not included.
.1.3.6.1.4.1.298.1.3.3.1.4.1.6,ASANTE-AH1012-MIB::ePortStatFrameTooLongs,Counter32,read-only,,mandatory,,Port counter for data frames longer than 1518  bytes, with a SFD and good FCS.
.1.3.6.1.4.1.298.1.3.3.1.4.1.7,ASANTE-AH1012-MIB::ePortStatRunts,Counter32,read-only,,mandatory,,Port counter for data frames with size less than  64 bytes, with no CRC or alignment errors.
.1.3.6.1.4.1.298.1.3.3.1.4.1.8,ASANTE-AH1012-MIB::ePortStatAlignmentErrors,Counter32,read-only,,mandatory,,Port counter of frames which are not integer  multiples of 1 byte.
.1.3.6.1.4.1.298.1.3.3.1.4.1.9,ASANTE-AH1012-MIB::ePortStatFragmentErrors,Counter32,read-only,,mandatory,,Port counter of frames greater than 2 bytes and  less than 64 bytes, with SFD and bad  FCS (CRC error).
.1.3.6.1.4.1.298.1.3.3.1.4.1.10,ASANTE-AH1012-MIB::ePortStatFCSErrors,Counter32,read-only,,mandatory,,Port counter of frames that failed Cyclic  Redundancy Check (CRC).
.1.3.6.1.4.1.298.1.3.3.1.4.1.11,ASANTE-AH1012-MIB::ePortStatIFGErrors,Counter32,read-only,,mandatory,,Port counter of Interframe Gap Errors where  time period between data frames is less than 5.5  micro seconds.
.1.3.6.1.4.1.298.1.3.3.1.4.1.12,ASANTE-AH1012-MIB::ePortStatDataRateMismatchs,Counter32,read-only,,mandatory,,Port counter of errors where incoming data rate  is not with in the tolerance level of  10 MHZ + or - 0.01%.
.1.3.6.1.4.1.298.1.3.3.1.4.1.13,ASANTE-AH1012-MIB::ePortStatShortEvents,Counter32,read-only,,mandatory,,Port counter of data burst where data is less than  10 bytes in length, with no SFD.
.1.3.6.1.4.1.298.1.3.3.1.4.1.14,ASANTE-AH1012-MIB::ePortStatCollisions,Counter32,read-only,,mandatory,,Port counter of collision flags.
.1.3.6.1.4.1.298.1.3.3.1.4.1.15,ASANTE-AH1012-MIB::ePortStatLateCollisions,Counter32,read-only,,mandatory,,Port counter of collisions occurring after the 64  byte collision window.
.1.3.6.1.4.1.298.1.3.3.1.4.1.16,ASANTE-AH1012-MIB::ePortStatMJLPs,Counter32,read-only,,mandatory,,Port counter of MAU jabber lockup protection  where hub repeater chip goes into lockup state.
.1.3.6.1.4.1.298.1.3.3.1.4.1.17,ASANTE-AH1012-MIB::ePortStatAutoPartitions,Counter32,read-only,,mandatory,,Port counter of number of times port was  autopartitioned in response to 31 or more  continuous collisions.
.1.3.6.1.4.1.298.1.3.3.1.4.1.18,ASANTE-AH1012-MIB::ePortStatSFDMissings,Counter32,read-only,,mandatory,,Port counter of a burst of data greater than or  equal to 10 bytes in length with no SFD.
.1.3.6.1.4.1.298.1.3.3.1.4.1.19,ASANTE-AH1012-MIB::ePortStatBadFrames,Counter32,read-only,,mandatory,,Port counter of total errored frames including  toolong, runts, misaligned, or bad FCS.
.1.3.6.1.4.1.298.1.3.3.1.5,ASANTE-AH1012-MIB::eTrafficMatrixTable,,not-accessible,,mandatory,,Table to analyze the number of packets received  through network traffic by the size of each packet.
.1.3.6.1.4.1.298.1.3.3.1.5.1,ASANTE-AH1012-MIB::eTrafficMatrixEntry,,not-accessible,eTrafficMatrixLength,mandatory,,Individual entry in matrix of packet lengths table.
.1.3.6.1.4.1.298.1.3.3.1.5.1.1,ASANTE-AH1012-MIB::eTrafficMatrixLength,INTEGER,read-only,,mandatory,,Starting length for each range in table.
.1.3.6.1.4.1.298.1.3.3.1.5.1.2,ASANTE-AH1012-MIB::eTrafficMatrixRange,INTEGER,read-only,,mandatory,other(1):from-1-to-63-bytes(2):from-64-to-127-bytes(3):from-128-to-255-bytes(4):from-256-to-511-bytes(5):from-512-to-767-bytes(6):from-768-to-1023-bytes(7):from-1024-to-1518-bytes(8):from-512-to-1023-bytes(9):from-65-to-511-bytes(10):exact-64-bytes(11):over-1518-bytes(12),Range of packet sizes to be scanned for in network  traffic.
.1.3.6.1.4.1.298.1.3.3.1.5.1.3,ASANTE-AH1012-MIB::eTrafficMatrixFramesCounts,Counter32,read-only,,mandatory,,Counter for number of frames received for  particular range specified by the MatrixRange. 
.1.3.6.1.4.1.298.1.3.3.1.6,ASANTE-AH1012-MIB::eSpecific,,,,,,
.1.3.6.1.4.1.298.1.3.3.1.6.1,ASANTE-AH1012-MIB::eSmartHubSpec,,,,,,
.1.3.6.1.4.1.298.1.3.3.1.6.1.1,ASANTE-AH1012-MIB::eColGraphBar,INTEGER,read-only,,mandatory,,Information on hardware LED collision graph bar.
.1.3.6.1.4.1.298.1.3.3.1.6.1.2,ASANTE-AH1012-MIB::eUtilGraphBar,INTEGER,read-only,,mandatory,,Information on hardware LED for utilization  graph bar.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6,ASANTE-AH1012-MIB::ePortRateTable,,not-accessible,,optional,,Network statistics for individual ports measured  in Rate/Second.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1,ASANTE-AH1012-MIB::ePortRateEntry,,not-accessible,ePortRateGrpIndex:ePortRatePortIndex,optional,,Individual entry in port rate table.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.1,ASANTE-AH1012-MIB::ePortRateGrpIndex,INTEGER,read-only,,optional,,The value of this object identifies the group for  which this entry contains port statistical  information.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.2,ASANTE-AH1012-MIB::ePortRatePortIndex,INTEGER,read-only,,optional,,This value identifies the port for which  this entry contains port statistical information.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.3,ASANTE-AH1012-MIB::ePortRateReadableFrames,INTEGER,read-only,,optional,,Rate of occurrence of good or readable frames.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.4,ASANTE-AH1012-MIB::ePortRateMcastFrames,INTEGER,read-only,,optional,,Rate of occurrence of number of muliticast frames.  1st bit in highest ordered bytes of destination  address is set to 1. Broadcast packets are  not included.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.5,ASANTE-AH1012-MIB::ePortRateBcastFrames,INTEGER,read-only,,optional,,Rate of occurrence of number of broadcast frames.  All 1s in network destination address. Multicast  packets are not included.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.6,ASANTE-AH1012-MIB::ePortRateFrameTooLongs,INTEGER,read-only,,optional,,Rate of occurrence of data frames longer than 1518  bytes, with a SFD and good FCS.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.7,ASANTE-AH1012-MIB::ePortRateRunts,INTEGER,read-only,,optional,,Rate of occurrence of data frames with size less  than 64 bytes, with no CRC or alignment errors.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.8,ASANTE-AH1012-MIB::ePortRateAlignmentErrors,INTEGER,read-only,,optional,,Rate of occurrence of frames which are not integer  multiples of 1 byte.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.9,ASANTE-AH1012-MIB::ePortRateFragmentErrors,INTEGER,read-only,,optional,,Rate of occurrence of frames greater than 2 bytes  and less than 64 bytes, with SFD and bad  FCS (CRC error).
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.10,ASANTE-AH1012-MIB::ePortRateFCSErrors,INTEGER,read-only,,optional,,Rate of occurrence of frames that failed Cyclic  Redundancy Check (CRC).
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.11,ASANTE-AH1012-MIB::ePortRateIFGErrors,INTEGER,read-only,,optional,,Rate of occurrence of interframe Gap Errors where  time period between data frames is less than 5.5  micro seconds.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.12,ASANTE-AH1012-MIB::ePortRateDataRateMismatch,INTEGER,read-only,,optional,,Rate of occurrence of errors where incoming data  rate is not with in the tolerance level of  10 MHz + or - 0.01%.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.13,ASANTE-AH1012-MIB::ePortRateShortEvents,INTEGER,read-only,,optional,,Rate of occurrence of data burst where data is less  than 10 bytes in length, with no SFD.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.14,ASANTE-AH1012-MIB::ePortRateCollisions,INTEGER,read-only,,optional,,Rate of occurrence of collision flags.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.15,ASANTE-AH1012-MIB::ePortRateLateCollisions,INTEGER,read-only,,optional,,Rate of occurrence of collisions occurring after the 64 byte collision window.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.16,ASANTE-AH1012-MIB::ePortRateMJLPs,INTEGER,read-only,,optional,,Rate of occurrence of MAU jabber lockup  protection where hub repeater chip goes into  lockup state.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.17,ASANTE-AH1012-MIB::ePortRateAutoPartitions,INTEGER,read-only,,optional,,Rate of occurrence of times port was  autopartitioned in response to 31 or  more continuous collisions.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.18,ASANTE-AH1012-MIB::ePortRateSFDMissings,INTEGER,read-only,,optional,,Rate of occurrence of a burst of data greater than  or equal to 10 bytes in length with no SFD.
.1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.19,ASANTE-AH1012-MIB::ePortRateBadFrames,INTEGER,read-only,,optional,,Rate of occurrence of total errored frames  including toolong, runts, misaligned, or bad FCS.
.1.3.6.1.4.1.298.1.3.4,ASANTE-AH1012-MIB::concStateCtrl,,,,,,
.1.3.6.1.4.1.298.1.3.4.1,ASANTE-AH1012-MIB::eStateCtrl,,,,,,
.1.3.6.1.4.1.298.1.3.4.1.1,ASANTE-AH1012-MIB::ePortStateCtrlTable,,not-accessible,,mandatory,,Table for port control parameters.
.1.3.6.1.4.1.298.1.3.4.1.1.1,ASANTE-AH1012-MIB::ePortStateCtrlEntry,,not-accessible,ePortStateGrpIndex:ePortStatePortIndex,mandatory,,Individual entry of port control in table.
.1.3.6.1.4.1.298.1.3.4.1.1.1.1,ASANTE-AH1012-MIB::ePortStateGrpIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the group for  which this entry contains port control information.
.1.3.6.1.4.1.298.1.3.4.1.1.1.2,ASANTE-AH1012-MIB::ePortStatePortIndex,INTEGER,read-only,,mandatory,,This value identifies the port for which this  entry contains port control information.
.1.3.6.1.4.1.298.1.3.4.1.1.1.3,ASANTE-AH1012-MIB::ePortStateType,INTEGER,read-only,,mandatory,other(1):bNC(2):aUI(3):rJ45(4):foil(5):three-in-one(6),Type of cabling physically connected to port.
.1.3.6.1.4.1.298.1.3.4.1.1.1.4,ASANTE-AH1012-MIB::ePortStateLinkStatus,INTEGER,read-only,,mandatory,others(1):linkon(2):linkoff(3),Link status for particular port. On=physical link  if link test enabled. Off=no physical link  exists or link test is disabled.
.1.3.6.1.4.1.298.1.3.4.1.1.1.5,ASANTE-AH1012-MIB::ePortStateLinkIntegTest,INTEGER,read-write,,mandatory,others(1):linkTestEnable(2):linkTestDisable(3),Set can enable or disabled link integrity test.  Get will say if link integrity test is enabled (2)  or disabled (3).
.1.3.6.1.4.1.298.1.3.4.1.1.1.6,ASANTE-AH1012-MIB::ePortStateAutoPartStatus,INTEGER,read-only,,mandatory,others(1):autopartitioned(2):notautopartitioned(3),Whether port has been autopartitioned (2) or not  autopartitioned (3).
.1.3.6.1.4.1.298.1.3.4.1.1.1.7,ASANTE-AH1012-MIB::ePortStateJabberStatus,INTEGER,read-only,,mandatory,others(1):on(2):off(3),Jabber detection for port. If On(2), then  jabber occurred on this port. Off(3), then no jabber occurred or jabber detection has been manually  disabled.
.1.3.6.1.4.1.298.1.3.4.1.1.1.8,ASANTE-AH1012-MIB::ePortStateJabberState,INTEGER,read-write,,mandatory,others(1):enabled(2):disabled(3),Set can enable or disable jabber detection test. Get will say if jabber detection test is enabled (2)  or disabled (3).
.1.3.6.1.4.1.298.1.3.4.1.1.1.9,ASANTE-AH1012-MIB::ePortStateAdminState,INTEGER,read-write,,mandatory,others(1):enabled(2):disabled(3),Set will manually enable or disable any port. Get  will say if port has been enabled (2) or  disabled (3).
.1.3.6.1.4.1.298.1.3.4.1.1.1.10,ASANTE-AH1012-MIB::ePortStateRDTState,INTEGER,read-write,,mandatory,others(1):unreduce(2):reduce(3),Whether RecvThreshold has been enabled or  disabled. Can use this to lower noise threshold  (tolerance) so that longer twisted pair links  can be used.
.1.3.6.1.4.1.298.1.3.4.1.1.1.11,ASANTE-AH1012-MIB::ePortStatePolarityStatus,INTEGER,read-only,,mandatory,others(1):normal(2):reversed(3),Polarity is correct (2) or not for this port.
.1.3.6.1.4.1.298.1.3.4.1.1.1.12,ASANTE-AH1012-MIB::ePortStatePolarityState,INTEGER,read-write,,mandatory,others(1):enabled(2):disabled(3),Autopolarity correction enabled or disabled.  Allows hub to make electrical corrections  automatically if cable does not reverse polarity  within wire pairs. If do not want this correction to take place, autocorrection can be disabled.
.1.3.6.1.4.1.298.1.3.5,ASANTE-AH1012-MIB::concNodeMgt,,,,,,
.1.3.6.1.4.1.298.1.3.5.1,ASANTE-AH1012-MIB::nodeSummaryTable,,not-accessible,,mandatory,,Node summary of all traffic through hub.
.1.3.6.1.4.1.298.1.3.5.1.1,ASANTE-AH1012-MIB::nodeSummaryEntry,,not-accessible,nodeSummaryGrpIndex:nodeSummaryPortIndex:nodeSummarySrcMacAddr:nodeSummaryDestMacAddr,mandatory,,Individual entry in node summary table. 
.1.3.6.1.4.1.298.1.3.5.1.1.1,ASANTE-AH1012-MIB::nodeSummaryGrpIndex,INTEGER,read-only,,mandatory,,Group Id for identifying the group  where node activity is detected.
.1.3.6.1.4.1.298.1.3.5.1.1.2,ASANTE-AH1012-MIB::nodeSummaryPortIndex,INTEGER,read-only,,mandatory,,Port Id for identifying the port where  node activity is detected.
.1.3.6.1.4.1.298.1.3.5.1.1.3,ASANTE-AH1012-MIB::nodeSummarySrcMacAddr,OCTET,read-only,,mandatory,,The source MAC address of the node  that is transmitting frames  received by this port.
.1.3.6.1.4.1.298.1.3.5.1.1.4,ASANTE-AH1012-MIB::nodeSummaryDestMacAddr,OCTET,read-only,,mandatory,,The destination MAC address of the  node to which frames are being  received by this port. 
.1.3.6.1.4.1.298.1.3.5.1.1.5,ASANTE-AH1012-MIB::nodeSummaryEtherType,INTEGER,read-only,,mandatory,,The 2 bytes after the source (src) address  in packet.
.1.3.6.1.4.1.298.1.3.5.1.1.6,ASANTE-AH1012-MIB::nodeSummaryIpAddrPair,OCTET,read-only,,mandatory,,Destination and source IP address if packet is  an Ethernet IP packet. It the packet is not an  Ethernet IP packet, then the information may  not be accurate.
.1.3.6.1.4.1.298.1.3.5.1.1.7,ASANTE-AH1012-MIB::nodeSummaryTimeStamp,TimeTicks,read-only,,mandatory,,nodeSummary entry time stamp (in hundredths of a  second) since the network management portion of the  system was last re-initialized.
.1.3.6.1.4.1.298.1.3.5.2,ASANTE-AH1012-MIB::nodeSecurity,,,,,,
.1.3.6.1.4.1.298.1.3.5.2.1,ASANTE-AH1012-MIB::nodeSecuLev1Table,,not-accessible,,mandatory,,Table of nodes which have access to particular  ports. Nodes are identified by MAC address.
.1.3.6.1.4.1.298.1.3.5.2.1.1,ASANTE-AH1012-MIB::nodeSecuLev1Entry,,not-accessible,nodeSecuLev1GrpIndex:nodeSecuLev1PortIndex,mandatory,,Individual entry for node security table.
.1.3.6.1.4.1.298.1.3.5.2.1.1.1,ASANTE-AH1012-MIB::nodeSecuLev1GrpIndex,INTEGER,read-only,,mandatory,,Group ID for port which verifying node access.
.1.3.6.1.4.1.298.1.3.5.2.1.1.2,ASANTE-AH1012-MIB::nodeSecuLev1PortIndex,INTEGER,read-only,,mandatory,,Specific port for which verifying node access.
.1.3.6.1.4.1.298.1.3.5.2.1.1.3,ASANTE-AH1012-MIB::nodeSecuLev1Status,INTEGER,read-write,,mandatory,other(1):valid(2):invalid(3),Address is valid or invalid.
.1.3.6.1.4.1.298.1.3.5.2.1.1.4,ASANTE-AH1012-MIB::nodeSecuLev1AllowedAddr,OCTET,read-write,,mandatory,,MAC address of nodes allowed for particular port.
.1.3.6.1.4.1.298.1.3.5.2.1.1.5,ASANTE-AH1012-MIB::nodeSecuLev1Action,INTEGER,read-write,,mandatory,other(1):partition-port(2):send-trap(3):partition-port-and-send-trap(4):send-trap-and-request-page(5):partition-port-and-send-trap-and-request-page(6),Set action for node intrusion violation.
.1.3.6.1.4.1.298.1.3.6,ASANTE-AH1012-MIB::concAlarmMgt,,,,,,
.1.3.6.1.4.1.298.1.3.6.1,ASANTE-AH1012-MIB::thresholdAlarm,,,,,,
.1.3.6.1.4.1.298.1.3.6.1.1,ASANTE-AH1012-MIB::thresholdLev1Table,,not-accessible,,optional,,Threshold/trap table.
.1.3.6.1.4.1.298.1.3.6.1.1.1,ASANTE-AH1012-MIB::thresholdLev1Entry,,not-accessible,thresholdLev1Index,optional,,Individual entry in threshold trap table.
.1.3.6.1.4.1.298.1.3.6.1.1.1.1,ASANTE-AH1012-MIB::thresholdLev1Index,INTEGER,read-only,,optional,,An index that uniquely identifies an entry in the  alarm table.
.1.3.6.1.4.1.298.1.3.6.1.1.1.2,ASANTE-AH1012-MIB::thresholdLev1Status,INTEGER,read-write,,optional,other(1):valid(2):invalid(3),Status of entry in threshold/trap table.
.1.3.6.1.4.1.298.1.3.6.1.1.1.3,ASANTE-AH1012-MIB::thresholdLev1Target,INTEGER,read-write,,optional,other(1):hub(2):port(3),Set target for threshold definition. Either whole  hub(2) or particular port (3).
.1.3.6.1.4.1.298.1.3.6.1.1.1.4,ASANTE-AH1012-MIB::thresholdLev1GroupIndex,INTEGER,read-write,,optional,,Group ID for trap set. One note--if the  target is selected as hub, the group index  will be ignored.
.1.3.6.1.4.1.298.1.3.6.1.1.1.5,ASANTE-AH1012-MIB::thresholdLev1PortIndex,INTEGER,read-write,,optional,,Port number for trap set. One note--if the  target is selected as hub, the port index  will be ignored.
.1.3.6.1.4.1.298.1.3.6.1.1.1.6,ASANTE-AH1012-MIB::thresholdLev1Subject,INTEGER,read-write,,optional,other(1):readable-frames(2):mcast-frames(3):bcast-frames(4):frame-too-longs(5):runts(6):alignment-errors(7):fragment-errors(8):fCS-errors(9):iFG-errors(10):data-rate-mismatch(11):short-events(12):collisions(13):late-collisions(14):auto-partitions(15):sfd-missing(16):bad-frames(17),Variable checking for in trap. These are the type  of frames that a trap will be verified against.
.1.3.6.1.4.1.298.1.3.6.1.1.1.7,ASANTE-AH1012-MIB::thresholdLev1SampleType,INTEGER,read-write,,optional,other(1):event-per-second(2),The method of sampling the selected variable  and calculating the value to be compared  against the threshold.
.1.3.6.1.4.1.298.1.3.6.1.1.1.8,ASANTE-AH1012-MIB::thresholdLev1StartupAlarm,INTEGER,read-write,,optional,other(1):rising(2):falling(3):rising-or-falling(4),When the trap is triggered in relation to value set. When goes above (2), below (3), or changes at  all from (4).
.1.3.6.1.4.1.298.1.3.6.1.1.1.9,ASANTE-AH1012-MIB::thresholdLev1WaterMark,INTEGER,read-write,,optional,,Counter of threshold.
.1.3.6.1.4.1.298.1.3.6.1.1.1.10,ASANTE-AH1012-MIB::thresholdLev1DetectedValue,INTEGER,read-only,,optional,,The value of the statistic for the last  sampling period.
.1.3.6.1.4.1.298.1.3.6.1.1.1.11,ASANTE-AH1012-MIB::thresholdLev1RisingEvent,INTEGER,read-write,,optional,other(1):partition-port(2):send-trap(3):partition-port-and-send-trap(4):send-trap-and-request-page(5):partition-port-and-send-trap-and-request-page(6),How to respond to a triggered event for a  rising event.
.1.3.6.1.4.1.298.1.3.6.1.1.1.12,ASANTE-AH1012-MIB::thresholdLev1FallingEvent,INTEGER,read-write,,optional,other(1):partition-port(2):send-trap(3):partition-port-and-send-trap(4):send-trap-and-request-page(5):partition-port-and-send-trap-and-request-page(6),How to respond to a triggered event for a  falling event.
.1.3.6.1.4.1.298.1.3.6.1.1.1.13,ASANTE-AH1012-MIB::thresholdLev1Interval,INTEGER,read-write,,optional,,The interval in seconds over which the data is  sampled.
.1.3.6.1.4.1.298.1.3.6.1.1.1.14,ASANTE-AH1012-MIB::thresholdLev1OwnerString,OCTET,read-write,,optional,,8-byte octet reserved for the owner who  defined this entry.
.1.3.6.1.4.1.298.1.5,ASANTE-SWITCH-MIB::switch,,,,,,
.1.3.6.1.4.1.298.1.5.1,ASANTE-SWITCH-MIB::eAsntSwitch,,,,,,
.1.3.6.1.4.1.298.1.5.1.1,ASANTE-SWITCH-MIB::eSWAgent,,,,,,
.1.3.6.1.4.1.298.1.5.1.1.1,ASANTE-SWITCH-MIB::eSWAgentSW,,,,,,
.1.3.6.1.4.1.298.1.5.1.1.1.1,ASANTE-SWITCH-MIB::eSWUpDownloadAction,INTEGER,read-write,,mandatory,other(1):off(2):download(3):upload(4),Agent upload/download action. May refer to the
.1.3.6.1.4.1.298.1.5.1.1.1.2,ASANTE-SWITCH-MIB::eSWUpDownloadStatus,INTEGER,read-only,,mandatory,other(1):action-Success(2):action-Failure(3):in-Progress(4):no-Action(5):configError(6),Result of the last upload/download request by
.1.3.6.1.4.1.298.1.5.1.1.1.3,ASANTE-SWITCH-MIB::eSWRemoteDownloadFile,INTEGER,read-write,,mandatory,other(1):config-File(2):image-File(3),Downloading what kind of file. The
.1.3.6.1.4.1.298.1.5.1.1.1.4,ASANTE-SWITCH-MIB::eSWRemoteConfigServer,IpAddress,read-write,,mandatory,,The IP address of the configuration file server.
.1.3.6.1.4.1.298.1.5.1.1.1.5,ASANTE-SWITCH-MIB::eSWRemoteConfigFileName,OCTET,read-write,,mandatory,,The name of switch configuration file. The
.1.3.6.1.4.1.298.1.5.1.1.1.6,ASANTE-SWITCH-MIB::eSWConfigRetryCounter,INTEGER,read-write,,mandatory,,The number of times the agent will retry a
.1.3.6.1.4.1.298.1.5.1.1.1.7,ASANTE-SWITCH-MIB::eSWRemoteImageServer,IpAddress,read-write,,mandatory,,The IP address of the image file server.
.1.3.6.1.4.1.298.1.5.1.1.1.8,ASANTE-SWITCH-MIB::eSWRemoteImageFileName,OCTET,read-write,,mandatory,,The name of the switch image file.
.1.3.6.1.4.1.298.1.5.1.1.1.9,ASANTE-SWITCH-MIB::eSWImageRetryCounter,INTEGER,read-write,,mandatory,,The number of times the agent will retry a
.1.3.6.1.4.1.298.1.5.1.1.1.10,ASANTE-SWITCH-MIB::eSWActiveImageBank,INTEGER,read-write,,mandatory,other(1):bank1(2):bank2(3),The image bank from which runtime code will
.1.3.6.1.4.1.298.1.5.1.1.1.11,ASANTE-SWITCH-MIB::eSWRemoteDownloadImageBank,INTEGER,read-write,,mandatory,other(1):bank1(2):bank2(3),The number of the destination bank to which
.1.3.6.1.4.1.298.1.5.1.1.1.12,ASANTE-SWITCH-MIB::eSWResetWaitTime,INTEGER,read-write,,mandatory,,The time to wait before executing a reset of
.1.3.6.1.4.1.298.1.5.1.1.1.13,ASANTE-SWITCH-MIB::eSWResetLeftTime,INTEGER,read-only,,mandatory,,Time left until the agent will reset. If a
.1.3.6.1.4.1.298.1.5.1.1.1.14,ASANTE-SWITCH-MIB::eSWBankImageInfoTable,,not-accessible,,mandatory,,A table of information about the switch's
.1.3.6.1.4.1.298.1.5.1.1.1.14.1,ASANTE-SWITCH-MIB::eSWBankImageInfoEntry,,not-accessible,eSWBankIndex,mandatory,,A row in the image bank table containing
.1.3.6.1.4.1.298.1.5.1.1.1.14.1.1,ASANTE-SWITCH-MIB::eSWBankIndex,INTEGER,read-only,,mandatory,,The index of bank image information table. It
.1.3.6.1.4.1.298.1.5.1.1.1.14.1.2,ASANTE-SWITCH-MIB::eSWMajorVer,INTEGER,read-only,,mandatory,,The major version of the image file loaded in
.1.3.6.1.4.1.298.1.5.1.1.1.14.1.3,ASANTE-SWITCH-MIB::eSWMinorVer,INTEGER,read-only,,mandatory,,The minor version number of the bank image
.1.3.6.1.4.1.298.1.5.1.1.1.14.1.4,ASANTE-SWITCH-MIB::eSWDateTime,OCTET,read-only,,mandatory,,The date and time of the image software loaded
.1.3.6.1.4.1.298.1.5.1.1.1.15,ASANTE-SWITCH-MIB::eSWTelnetSessions,INTEGER,read-only,,mandatory,,Number of concurrent Telnet sessions the agent
.1.3.6.1.4.1.298.1.5.1.1.1.16,ASANTE-SWITCH-MIB::eSWTelnetSessionActive,INTEGER,read-only,,mandatory,,Number of Telnet sessions active. This
.1.3.6.1.4.1.298.1.5.1.1.1.17,ASANTE-SWITCH-MIB::eSWTelnetTimeOut,INTEGER,read-write,,mandatory,,Telnet session time-out value, in minutes. The
.1.3.6.1.4.1.298.1.5.1.1.1.18,ASANTE-SWITCH-MIB::eSWSTP,INTEGER,read-write,,mandatory,other(1):enable(2):disable(3),Setting this value to enable(2) will cause the
.1.3.6.1.4.1.298.1.5.1.1.1.19,ASANTE-SWITCH-MIB::eSWUserInterfaceTimeOut,INTEGER,read-write,,mandatory,,The console interface time-out value, in minutes.
.1.3.6.1.4.1.298.1.5.1.1.1.20,ASANTE-SWITCH-MIB::eSWBCastMcastThreshold,INTEGER,read-write,,mandatory,,The switch will detect a Broadcast or Multicast
.1.3.6.1.4.1.298.1.5.1.1.1.21,ASANTE-SWITCH-MIB::eSWBCastMcastDuration,INTEGER,read-write,,mandatory,,The switch will detect a Broadcast or
.1.3.6.1.4.1.298.1.5.1.1.1.22,ASANTE-SWITCH-MIB::eSWCfgFileErrStatus,OCTET,read-only,,mandatory,,This object represents the results of previous
.1.3.6.1.4.1.298.1.5.1.1.2,ASANTE-SWITCH-MIB::eSWAgentHW,,,,,,
.1.3.6.1.4.1.298.1.5.1.1.2.1,ASANTE-SWITCH-MIB::eSWDRAMSize,INTEGER,read-only,,mandatory,,DRAM installed on the switch, in bytes.
.1.3.6.1.4.1.298.1.5.1.1.2.2,ASANTE-SWITCH-MIB::eSWFlashRAMSize,INTEGER,read-only,,mandatory,,Flash RAM installed on the switch, in bytes.
.1.3.6.1.4.1.298.1.5.1.1.2.3,ASANTE-SWITCH-MIB::eSWEEPROMSize,INTEGER,read-only,,mandatory,,EEPROM installed on the switch, in bytes.
.1.3.6.1.4.1.298.1.5.1.1.3,ASANTE-SWITCH-MIB::eSWAgentFW,,,,,,
.1.3.6.1.4.1.298.1.5.1.2,ASANTE-SWITCH-MIB::eSWBasic,,,,,,
.1.3.6.1.4.1.298.1.5.1.2.1,ASANTE-SWITCH-MIB::eSWType,INTEGER,read-only,,mandatory,other(1):thunderBird(2):intraStack(3):intraSwitch(4):intraCore8000(5):intraCore9000(6),The ethernet switch type.
.1.3.6.1.4.1.298.1.5.1.2.2,ASANTE-SWITCH-MIB::eSWBkpType,INTEGER,read-only,,mandatory,other(1):no-Bkp(2):intraStack(3):intraSwitch6216M(4):intraSwitch6224(5):intraSwitch6224M(6):intraCore8000(7):intraCore9000(8),The backplane type of this switch.
.1.3.6.1.4.1.298.1.5.1.2.3,ASANTE-SWITCH-MIB::eSWGroupCapacity,INTEGER,read-only,,mandatory,,The number of groups that can be contained
.1.3.6.1.4.1.298.1.5.1.2.4,ASANTE-SWITCH-MIB::eSWStackLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the last change of
.1.3.6.1.4.1.298.1.5.1.2.5,ASANTE-SWITCH-MIB::eSWGroupInfoTable,,not-accessible,,mandatory,,This is the table to describe basic information
.1.3.6.1.4.1.298.1.5.1.2.5.1,ASANTE-SWITCH-MIB::eSWGroupInfoEntry,,not-accessible,eSWGrpIndex,mandatory,,This is the entry to describe basic information
.1.3.6.1.4.1.298.1.5.1.2.5.1.1,ASANTE-SWITCH-MIB::eSWGrpIndex,INTEGER,read-only,,mandatory,,The group number, which is the index of the table.
.1.3.6.1.4.1.298.1.5.1.2.5.1.2,ASANTE-SWITCH-MIB::eSWGrpID,OCTET,read-only,,mandatory,,The ID of this group module. This is the MAC address
.1.3.6.1.4.1.298.1.5.1.2.5.1.3,ASANTE-SWITCH-MIB::eSWGrpState,INTEGER,read-write,,mandatory,other(1):enable(2):disable(3),A command to disable or enable a physical module
.1.3.6.1.4.1.298.1.5.1.2.5.1.4,ASANTE-SWITCH-MIB::eSWGrpNumofPorts,INTEGER,read-only,,mandatory,,The number of ports including expansion ports
.1.3.6.1.4.1.298.1.5.1.2.5.1.5,ASANTE-SWITCH-MIB::eSWGrpType,INTEGER,read-only,,mandatory,other(1):empty(2):intraSwitch(3):intraStack-Base(4):intraStack-FX8(5):intraStack-TX16(6):enterprise6216M-TX16(7):enterprise6224M-TX24(8):intraCore8000(9):intraCore-RJ45(10):intraCore-RJ21(11):intraCore-GIGA(12),The type of group module described by this entry.
.1.3.6.1.4.1.298.1.5.1.2.5.1.6,ASANTE-SWITCH-MIB::eSWGrpDescrption,OCTET,read-only,,mandatory,,A description of the group module described by
.1.3.6.1.4.1.298.1.5.1.2.5.1.7,ASANTE-SWITCH-MIB::eSWGrpLED,OCTET,read-only,,mandatory,,This octet string represents the current LED
.1.3.6.1.4.1.298.1.5.1.2.5.1.8,ASANTE-SWITCH-MIB::eSWGrpFanStatus,INTEGER,read-only,,mandatory,other(1):no-fan(2):normal(3):fail(4):fan-1-bad(5):fan-2-bad(6):fan-1-2-bad(7),The value of this object describes the fan status.
.1.3.6.1.4.1.298.1.5.1.2.5.1.9,ASANTE-SWITCH-MIB::eSWGrpNumofExpPorts,INTEGER,read-only,,mandatory,,The number of expansion ports in this group.
.1.3.6.1.4.1.298.1.5.1.2.5.1.10,ASANTE-SWITCH-MIB::eSWGrpLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the last change
.1.3.6.1.4.1.298.1.5.1.2.5.1.11,ASANTE-SWITCH-MIB::eSWGrpReset,INTEGER,read-only,,mandatory,other(1):noReset(2):reset(3),This object represents the current group
.1.3.6.1.4.1.298.1.5.1.2.6,ASANTE-SWITCH-MIB::eSWPortInfoTable,,not-accessible,,mandatory,,A table containing basic information for each
.1.3.6.1.4.1.298.1.5.1.2.6.1,ASANTE-SWITCH-MIB::eSWPortInfoEntry,,not-accessible,eSWPortGrpIndex:eSWPortIndex,mandatory,,A table entry containing information about a
.1.3.6.1.4.1.298.1.5.1.2.6.1.1,ASANTE-SWITCH-MIB::eSWPortGrpIndex,INTEGER,read-only,,mandatory,,The number of the group containing the port.
.1.3.6.1.4.1.298.1.5.1.2.6.1.2,ASANTE-SWITCH-MIB::eSWPortIndex,INTEGER,read-only,,mandatory,,The number of the port which this entry
.1.3.6.1.4.1.298.1.5.1.2.6.1.3,ASANTE-SWITCH-MIB::eSWPortType,INTEGER,read-only,,mandatory,other(1):mii-Empty(2):mii-FL(3):mii-RJ45(4):mii-FX(5):rj45(6):foil(7),The type port in this switch. MII-Empty(1)
.1.3.6.1.4.1.298.1.5.1.2.6.1.4,ASANTE-SWITCH-MIB::eSWPortAutoNegAbility,INTEGER,read-only,,mandatory,other(1):with(2):without(3),Indicates whether the port has Auto Negotiation
.1.3.6.1.4.1.298.1.5.1.2.6.1.5,ASANTE-SWITCH-MIB::eSWPortLink,INTEGER,read-only,,mandatory,other(1):up(2):down(3),The link status of this port.
.1.3.6.1.4.1.298.1.5.1.2.6.1.6,ASANTE-SWITCH-MIB::eSWPortSpeed,INTEGER,read-only,,mandatory,other(1):m10-Mbps(2):m100-Mbps(3):g1-Gbps(4),The working speed of this port. If the port's
.1.3.6.1.4.1.298.1.5.1.2.6.1.7,ASANTE-SWITCH-MIB::eSWPortDuplex,INTEGER,read-only,,mandatory,other(1):half-Duplex(2):full-Duplex(3),The duplex state of this port. When the port
.1.3.6.1.4.1.298.1.5.1.2.7,ASANTE-SWITCH-MIB::eSWGpPtInfoTable,,not-accessible,,mandatory,,A table describing the port information for each
.1.3.6.1.4.1.298.1.5.1.2.7.1,ASANTE-SWITCH-MIB::eSWGpPtInfoEntry,,not-accessible,eSWGpPtInfoIndex,mandatory,,This is an entry of eSWGroupPortInfoTable.
.1.3.6.1.4.1.298.1.5.1.2.7.1.1,ASANTE-SWITCH-MIB::eSWGpPtInfoIndex,INTEGER,read-only,,mandatory,,The group number .
.1.3.6.1.4.1.298.1.5.1.2.7.1.2,ASANTE-SWITCH-MIB::eSWGpPtInfoType,OCTET,read-only,,mandatory,,This octet string is for the type of each port
.1.3.6.1.4.1.298.1.5.1.2.7.1.3,ASANTE-SWITCH-MIB::eSWGpPtInfoAutoNegAbility,OCTET,read-only,,mandatory,,This octet string is for the auto negotiation
.1.3.6.1.4.1.298.1.5.1.2.7.1.4,ASANTE-SWITCH-MIB::eSWGpPtInfoLink,OCTET,read-only,,mandatory,,This octet string is for the link status of
.1.3.6.1.4.1.298.1.5.1.2.7.1.5,ASANTE-SWITCH-MIB::eSWGpPtInfoSpeed,OCTET,read-only,,mandatory,,This octet string is for the operating speed of
.1.3.6.1.4.1.298.1.5.1.2.7.1.6,ASANTE-SWITCH-MIB::eSWGpPtInfoDuplex,OCTET,read-only,,mandatory,,This octet string is for the Duplex state of
.1.3.6.1.4.1.298.1.5.1.2.8,ASANTE-SWITCH-MIB::eSWPtMacInfoTable,,not-accessible,,mandatory,, A table describing the MAC addresses learned
.1.3.6.1.4.1.298.1.5.1.2.8.1,ASANTE-SWITCH-MIB::eSWPtMacInfoEntry,,not-accessible,eSWPtMacPort:eSWPtMacMACADDR,mandatory,, Entry of eSWPtMacInfoTable.
.1.3.6.1.4.1.298.1.5.1.2.8.1.1,ASANTE-SWITCH-MIB::eSWPtMacPort,INTEGER,read-only,,mandatory,,The port number in the switch.
.1.3.6.1.4.1.298.1.5.1.2.8.1.2,ASANTE-SWITCH-MIB::eSWPtMacMACADDR,OCTET,read-only,,mandatory,,MAC address.
.1.3.6.1.4.1.298.1.5.1.2.9,ASANTE-SWITCH-MIB::eSWVlanInfo,,,,,,
.1.3.6.1.4.1.298.1.5.1.2.9.1,ASANTE-SWITCH-MIB::eSWVlanVersion,INTEGER,read-only,,mandatory,,The version of VLAN implementation in the switch
.1.3.6.1.4.1.298.1.5.1.2.9.2,ASANTE-SWITCH-MIB::eSWVlanMaxCapacity,INTEGER,read-only,,mandatory,,The maximum number of VLANs that can be supported
.1.3.6.1.4.1.298.1.5.1.2.9.3,ASANTE-SWITCH-MIB::eSWVlanTypesSupported,INTEGER,read-only,,mandatory,,The types of VLAN supported by the switch. Here
.1.3.6.1.4.1.298.1.5.1.2.9.4,ASANTE-SWITCH-MIB::eSWVlanTable,,not-accessible,,mandatory,,A table describing the information about every
.1.3.6.1.4.1.298.1.5.1.2.9.4.1,ASANTE-SWITCH-MIB::eSWVlanEntry,,not-accessible,eSWVLANIndex,mandatory,,A list of information for each VLAN within the
.1.3.6.1.4.1.298.1.5.1.2.9.4.1.1,ASANTE-SWITCH-MIB::eSWVLANIndex,INTEGER,read-only,,mandatory,,Index in VLAN Configuration Table within the
.1.3.6.1.4.1.298.1.5.1.2.9.4.1.2,ASANTE-SWITCH-MIB::eSWVlanName,OCTET,read-write,,mandatory,,This octet string is the name of the VLAN. The
.1.3.6.1.4.1.298.1.5.1.2.9.4.1.3,ASANTE-SWITCH-MIB::eSWVlanID,INTEGER,read-write,,mandatory,,A 12 bit indentifier for this VLAN.
.1.3.6.1.4.1.298.1.5.1.2.9.4.1.4,ASANTE-SWITCH-MIB::eSWVlanMemberSet,OCTET,read-only,,mandatory,,The set of ports to which traffic destined for
.1.3.6.1.4.1.298.1.5.1.2.9.4.1.5,ASANTE-SWITCH-MIB::eSWVlanMgmAccess,INTEGER,read-write,,mandatory,enable(1):disable(2),This object provides enabling and disabling of
.1.3.6.1.4.1.298.1.5.1.2.10,ASANTE-SWITCH-MIB::eSWTrunkBundleCapacity,INTEGER,read-only,,mandatory,,The number of Trunk Bundles that can be supported
.1.3.6.1.4.1.298.1.5.1.2.11,ASANTE-SWITCH-MIB::eSWTrunkBundleTable,,not-accessible,,mandatory,,A table describing the Trunk Bundles information
.1.3.6.1.4.1.298.1.5.1.2.11.1,ASANTE-SWITCH-MIB::eSWTrunkBundleEntry,,not-accessible,eSWTrunkBundleIndex,mandatory,,This is an entry of eSWTrunkBundleTable.
.1.3.6.1.4.1.298.1.5.1.2.11.1.1,ASANTE-SWITCH-MIB::eSWTrunkBundleIndex,INTEGER,read-only,,mandatory,, The index of eSWTrunkBundleTable table.
.1.3.6.1.4.1.298.1.5.1.2.11.1.2,ASANTE-SWITCH-MIB::eSWTrunkBundlePortA,INTEGER,read-only,,mandatory,,The ID of the first port of the Trunk Bundles. 
.1.3.6.1.4.1.298.1.5.1.2.11.1.3,ASANTE-SWITCH-MIB::eSWTrunkBundlePortB,INTEGER,read-only,,mandatory,,The ID of the second port of the Trunk Bundles. 
.1.3.6.1.4.1.298.1.5.1.2.11.1.4,ASANTE-SWITCH-MIB::eSWTrunkBundleState,INTEGER,read-write,,mandatory,other(1):enable(2):disable(3),When this function is enabled, ports specified
.1.3.6.1.4.1.298.1.5.1.2.13,ASANTE-SWITCH-MIB::eSWNetSecurityInfo,,,,,,
.1.3.6.1.4.1.298.1.5.1.2.13.1,ASANTE-SWITCH-MIB::eSWNetworkSecurityVersion,INTEGER,read-only,,mandatory,,The version of Network Security implementation
.1.3.6.1.4.1.298.1.5.1.2.13.2,ASANTE-SWITCH-MIB::eSWNetworkSecurityMAXLevels,INTEGER,read-only,,mandatory,,The maximum number of Security Levels that can
.1.3.6.1.4.1.298.1.5.1.2.13.3,ASANTE-SWITCH-MIB::eSWSecurityTypesSupported,INTEGER,read-only,,mandatory,, The type of network security supported by the
.1.3.6.1.4.1.298.1.5.1.2.13.4,ASANTE-SWITCH-MIB::eSWSecConfigTable,,not-accessible,,mandatory,,A table that contains information about the
.1.3.6.1.4.1.298.1.5.1.2.13.4.1,ASANTE-SWITCH-MIB::eSWSecConfigEntry,,not-accessible,eSWSecPortIndex,mandatory,, A list of information for each port within
.1.3.6.1.4.1.298.1.5.1.2.13.4.1.1,ASANTE-SWITCH-MIB::eSWSecPortIndex,INTEGER,read-only,,mandatory,,The number of the port which this entry
.1.3.6.1.4.1.298.1.5.1.2.13.4.1.2,ASANTE-SWITCH-MIB::eSWSecurityLevel,INTEGER,read-write,,mandatory,newNodeDetection(1):knownMACAddressForwarding(2):restrictedKnownMACAddressForwarding(3):knownMACAddressForwardingWithIntruderLock(4):normalPort(5):other(6),Security Level Configured for the port.
.1.3.6.1.4.1.298.1.5.1.2.13.5,ASANTE-SWITCH-MIB::eSWSecMonitorPort,INTEGER,read-write,,mandatory,,The port number within the switch which is
.1.3.6.1.4.1.298.1.5.1.2.13.6,ASANTE-SWITCH-MIB::eSWSecurityTrapEnable,INTEGER,read-write,,mandatory,enable(1):disable(2):other(3),The object is to allow the management to control
.1.3.6.1.4.1.298.1.5.1.2.13.7,ASANTE-SWITCH-MIB::eSWSecIncSetConfigTable,,not-accessible,,mandatory,,A table describing the MAC addresses configured
.1.3.6.1.4.1.298.1.5.1.2.13.7.1,ASANTE-SWITCH-MIB::eSWSecIncSetConfigEntry,,not-accessible,eSWIncSetPort:eSWIncSetMACAddr,mandatory,,Entry of eSWSecIncSetConfigTable.
.1.3.6.1.4.1.298.1.5.1.2.13.7.1.1,ASANTE-SWITCH-MIB::eSWIncSetPort,INTEGER,read-only,,mandatory,,The port number in the switch associated with
.1.3.6.1.4.1.298.1.5.1.2.13.7.1.2,ASANTE-SWITCH-MIB::eSWIncSetMACAddr,OCTET,read-only,,mandatory,,MAC address which is part of the Inclusive Set.
.1.3.6.1.4.1.298.1.5.1.2.13.7.1.3,ASANTE-SWITCH-MIB::eSWIncSetMACStatus,INTEGER,read-write,,mandatory,valid(1):invalid(2),MAC address which is part of the Inclusive Set.
.1.3.6.1.4.1.298.1.5.1.2.13.8,ASANTE-SWITCH-MIB::eSWSecIntMACAddrTable,,not-accessible,,mandatory,, A table containing Intruder MAC Addresses when
.1.3.6.1.4.1.298.1.5.1.2.13.8.1,ASANTE-SWITCH-MIB::eSWSecIntMACAddrEntry,,not-accessible,eSWIntMACAddrPort:eSWIntMACAddr,mandatory,, Entry of eSWSecIntMACAddrTable.
.1.3.6.1.4.1.298.1.5.1.2.13.8.1.1,ASANTE-SWITCH-MIB::eSWIntMACAddrPort,INTEGER,read-only,,mandatory,,The port number in the switch associated with
.1.3.6.1.4.1.298.1.5.1.2.13.8.1.2,ASANTE-SWITCH-MIB::eSWIntMACAddr,OCTET,read-only,,mandatory,,Intruder MAC Address.
.1.3.6.1.4.1.298.1.5.1.2.14,ASANTE-SWITCH-MIB::eSWFilteringInfo,,,,,,
.1.3.6.1.4.1.298.1.5.1.2.14.1,ASANTE-SWITCH-MIB::eSWFilteringTypesSupported,INTEGER,read-only,,mandatory,,The type of Filtering Configuration supported
.1.3.6.1.4.1.298.1.5.1.2.14.2,ASANTE-SWITCH-MIB::eSWFiltMACVLANBasedConfigTable,,not-accessible,,mandatory,,A table describing the filtering MAC addresses
.1.3.6.1.4.1.298.1.5.1.2.14.2.1,ASANTE-SWITCH-MIB::eSWFiltMACVLANBasedConfigEntry,,not-accessible,eSWVLANIndex:eSWFiltMACAddr,mandatory,, Entryof eSWFiltMACVLANBasedConfigTable.
.1.3.6.1.4.1.298.1.5.1.2.14.2.1.1,ASANTE-SWITCH-MIB::eSWVIDIndex,INTEGER,read-only,,mandatory,,Index in VLAN Configuration Table within the
.1.3.6.1.4.1.298.1.5.1.2.14.2.1.2,ASANTE-SWITCH-MIB::eSWFiltMACAddr,OCTET,read-only,,mandatory,,MAC Address which will be filtered in the
.1.3.6.1.4.1.298.1.5.1.2.14.2.1.3,ASANTE-SWITCH-MIB::eSWFiltMACSts,INTEGER,read-write,,mandatory,valid(1):invalid(2),MAC address which is part of the VLAN Based
.1.3.6.1.4.1.298.1.5.1.2.14.3,ASANTE-SWITCH-MIB::eSWFiltMACPortBasedConfigTable,,not-accessible,,mandatory,, A table describing the filtering MAC addresses
.1.3.6.1.4.1.298.1.5.1.2.14.3.1,ASANTE-SWITCH-MIB::eSWFiltMACPortBasedConfigEntry,,not-accessible,eSWFiltPortIndex:eSWFiltPMACAddr,mandatory,,Entry of eSWFiltMACPortBasedConfigTable.
.1.3.6.1.4.1.298.1.5.1.2.14.3.1.1,ASANTE-SWITCH-MIB::eSWFiltPortIndex,INTEGER,read-write,,mandatory,,The Port number in the switch.
.1.3.6.1.4.1.298.1.5.1.2.14.3.1.2,ASANTE-SWITCH-MIB::eSWFiltPMACAddr,OCTET,read-write,,mandatory,,MAC Address which will be filtered in the
.1.3.6.1.4.1.298.1.5.1.2.14.3.1.3,ASANTE-SWITCH-MIB::eSWFiltPMACStatus,INTEGER,read-write,,mandatory,valid(1):invalid(2),This field indicates status associated with
.1.3.6.1.4.1.298.1.5.1.2.14.4,ASANTE-SWITCH-MIB::eSWFiltProtVLANBasedCFGTable,,not-accessible,,mandatory,,A table describing the filtering Protocol Type
.1.3.6.1.4.1.298.1.5.1.2.14.4.1,ASANTE-SWITCH-MIB::eSWFiltProtVLANBasedCFGEntry,,not-accessible,eSWVLANIndex,mandatory,, Entry of eSWFiltProtVLANBasedCFGTable.
.1.3.6.1.4.1.298.1.5.1.2.14.4.1.1,ASANTE-SWITCH-MIB::eSWFiltProtocolVID,INTEGER,read-write,,mandatory,,Index in VLAN Configuration Table within the
.1.3.6.1.4.1.298.1.5.1.2.14.4.1.2,ASANTE-SWITCH-MIB::eSWFiltVLANProtocolType,OCTET,read-write,,mandatory,,This object represents the Protocol Type Filter
.1.3.6.1.4.1.298.1.5.1.2.14.5,ASANTE-SWITCH-MIB::eSWFiltProtPortBasedCFGTable,,not-accessible,,mandatory,,A table describing the filtering Protocol Type
.1.3.6.1.4.1.298.1.5.1.2.14.5.1,ASANTE-SWITCH-MIB::eSWFiltProtPortBasedCFGEntry,,not-accessible,eSWPortIndex,mandatory,, Entry of eSWFiltProtPortBasedCFGTable.
.1.3.6.1.4.1.298.1.5.1.2.14.5.1.1,ASANTE-SWITCH-MIB::eSWFiltProtPort,INTEGER,read-write,,mandatory,,The Port number in the switch.
.1.3.6.1.4.1.298.1.5.1.2.14.5.1.2,ASANTE-SWITCH-MIB::eSWFiltProtcolType,OCTET,read-write,,mandatory,,This object represents the Protocol Type Filter
.1.3.6.1.4.1.298.1.5.1.3,ASANTE-SWITCH-MIB::eSWCtrl,,,,,,
.1.3.6.1.4.1.298.1.5.1.3.1,ASANTE-SWITCH-MIB::eSWPortCtrlTable,,not-accessible,,mandatory,,A table describing the port control information
.1.3.6.1.4.1.298.1.5.1.3.1.1,ASANTE-SWITCH-MIB::eSWPortCtrlEntry,,not-accessible,eSWGrpPtCtrlIndex:eSWPortCtrlIndex,mandatory,,An entry describing control information for a
.1.3.6.1.4.1.298.1.5.1.3.1.1.1,ASANTE-SWITCH-MIB::eSWGrpPtCtrlIndex,INTEGER,read-only,,mandatory,,The group containing the port for which this
.1.3.6.1.4.1.298.1.5.1.3.1.1.2,ASANTE-SWITCH-MIB::eSWPortCtrlIndex,INTEGER,read-only,,mandatory,,The port number for this entry.
.1.3.6.1.4.1.298.1.5.1.3.1.1.3,ASANTE-SWITCH-MIB::eSWPortCtrlState,INTEGER,read-write,,mandatory,other(1):enable(2):disable(3),Identifies whether the port is administratively
.1.3.6.1.4.1.298.1.5.1.3.1.1.4,ASANTE-SWITCH-MIB::eSWPortCtrlBcastFilter,INTEGER,read-write,,mandatory,other(1):enable(2):disable(3),Broadcast packet filtering control. If this is
.1.3.6.1.4.1.298.1.5.1.3.1.1.5,ASANTE-SWITCH-MIB::eSWPortCtrlStNFw,INTEGER,read-write,,mandatory,other(1):enable(2):disable(3),Enables or disables store-and-forward switching
.1.3.6.1.4.1.298.1.5.1.3.1.1.6,ASANTE-SWITCH-MIB::eSWPortCtrlSTP,INTEGER,read-only,,mandatory,other(1):enable(2):disable(3),If this function is enable(1) and
.1.3.6.1.4.1.298.1.5.1.3.1.1.7,ASANTE-SWITCH-MIB::eSWPortCtrlVlanID,INTEGER,read-write,,mandatory,,The 12 bit port VLAN indentifier for this port
.1.3.6.1.4.1.298.1.5.1.3.1.1.8,ASANTE-SWITCH-MIB::eSWPortCtrlVlanTagging,INTEGER,read-write,,mandatory,enable(1):enable8021Q(2):disable(3),Whether a frame should be tagged with VLAN
.1.3.6.1.4.1.298.1.5.1.3.1.1.9,ASANTE-SWITCH-MIB::eSWPortCtrlVlanGroups,OCTET,read-write,,mandatory,,This object represents the port vlan map in
.1.3.6.1.4.1.298.1.5.1.3.1.1.10,ASANTE-SWITCH-MIB::eSWPortCtrlTrunkBundleIndex,INTEGER,read-only,,mandatory,,A value of 0 means that the port does not belong
.1.3.6.1.4.1.298.1.5.1.3.1.1.11,ASANTE-SWITCH-MIB::eSWPortCtrlGVRPEnable,INTEGER,read-write,,mandatory,enable(1):disable(2),This entry when set to enable, means GVRP
.1.3.6.1.4.1.298.1.5.1.3.1.1.12,ASANTE-SWITCH-MIB::eSWPortCtrlSecurityLevel,INTEGER,read-write,,mandatory,newNodeDetection(1):knownMACAddressForwarding(2):restrictedKnownMACAddressForwarding(3):knownMACAddressForwardingWithIntruderLock(4):normalPort(5):other(6),Security Level associated with the port. When
.1.3.6.1.4.1.298.1.5.1.3.1.1.13,ASANTE-SWITCH-MIB::eSWPortProtocolFilter,OCTET,read-write,,mandatory,,This object represents the Protocol Level
.1.3.6.1.4.1.298.1.5.1.3.2,ASANTE-SWITCH-MIB::eSWGpPtCtrlTable,,not-accessible,,mandatory,,A table containing control information for
.1.3.6.1.4.1.298.1.5.1.3.2.1,ASANTE-SWITCH-MIB::eSWGpPtCtrlEntry,,not-accessible,eSWGpPtCtrlIndex,mandatory,,An entry of table eSWGpPtCtrlTable.
.1.3.6.1.4.1.298.1.5.1.3.2.1.1,ASANTE-SWITCH-MIB::eSWGpPtCtrlIndex,INTEGER,read-only,,mandatory,,The index of this table. It is the group number.
.1.3.6.1.4.1.298.1.5.1.3.2.1.2,ASANTE-SWITCH-MIB::eSWGpPtCtrlState,OCTET,read-write,,mandatory,,This octet string displays the administrative
.1.3.6.1.4.1.298.1.5.1.3.2.1.3,ASANTE-SWITCH-MIB::eSWGpPtCtrlBcastFilter,OCTET,read-write,,mandatory,,This octet string displays the broadcast filter
.1.3.6.1.4.1.298.1.5.1.3.2.1.4,ASANTE-SWITCH-MIB::eSWGpPtCtrlStNFw,OCTET,read-only,,mandatory,,This octet string displays the switching
.1.3.6.1.4.1.298.1.5.1.3.2.1.5,ASANTE-SWITCH-MIB::eSWGpPtCtrlSTP,OCTET,read-only,,mandatory,,This octet string displays the individual
.1.3.6.1.4.1.298.1.5.1.3.2.1.6,ASANTE-SWITCH-MIB::eSWGpPtCtrlSecurityLevel,OCTET,read-write,,mandatory,,This octet string is for the Security Level
.1.3.6.1.4.1.298.1.5.1.3.2.1.7,ASANTE-SWITCH-MIB::eSWGpPtProtocolFilter,OCTET,read-write,,mandatory,,This octet string represents the Protocol Level
.1.3.6.1.4.1.298.1.5.1.3.3,ASANTE-SWITCH-MIB::eSWAutoPortCtrlTable,,not-accessible,,mandatory,,A table containing information about each port's
.1.3.6.1.4.1.298.1.5.1.3.3.1,ASANTE-SWITCH-MIB::eSWAutoPortCtrlEntry,,not-accessible,eSWAutoNegGrpIndex:eSWAutoNegPortIndex,mandatory,,A entry of eSWAutoPortControlTable. It uses
.1.3.6.1.4.1.298.1.5.1.3.3.1.1,ASANTE-SWITCH-MIB::eSWAutoNegGrpIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the group for
.1.3.6.1.4.1.298.1.5.1.3.3.1.2,ASANTE-SWITCH-MIB::eSWAutoNegPortIndex,INTEGER,read-only,,mandatory,,The value of this object identifies the port for
.1.3.6.1.4.1.298.1.5.1.3.3.1.3,ASANTE-SWITCH-MIB::eSWAutoNegAdminState,INTEGER,read-write,,mandatory,other(1):enabled(2):disable(3),A port which has auto-negotiation signaling
.1.3.6.1.4.1.298.1.5.1.3.3.1.4,ASANTE-SWITCH-MIB::eSWAutoNegRemoteAble,INTEGER,read-only,,mandatory,other(1):able(2):not-able(3),This object will be set to able(2) if the
.1.3.6.1.4.1.298.1.5.1.3.3.1.5,ASANTE-SWITCH-MIB::eSWAutoNegAutoConfig,INTEGER,read-only,,mandatory,other(1):configuring(2):complete(3):disable(4):parallel-detect-fail(5):remote-fault(6),Indicates whether Auto Negotiation signaling is in
.1.3.6.1.4.1.298.1.5.1.3.3.1.6,ASANTE-SWITCH-MIB::eSWAutoNegLocalAbility,OCTET,read-only,,mandatory,,The connecting ability of local port. The
.1.3.6.1.4.1.298.1.5.1.3.3.1.7,ASANTE-SWITCH-MIB::eSWAutoNegAdvertisedAbility,OCTET,read-write,,mandatory,,This object represents the capabilities which will
.1.3.6.1.4.1.298.1.5.1.3.3.1.8,ASANTE-SWITCH-MIB::eSWAutoNegReceivedAbility,OCTET,read-only,,mandatory,,Indicates the advertised capabilities of link
.1.3.6.1.4.1.298.1.5.1.3.3.1.9,ASANTE-SWITCH-MIB::eSWAutoNegRestartAutoConfig,INTEGER,read-write,,mandatory,other(1):reStart(2):noRestart(3),Forces auto-negotiation to begin link
.1.3.6.1.4.1.298.1.5.1.4,ASANTE-SWITCH-MIB::eSWMonitor,,,,,,
.1.3.6.1.4.1.298.1.5.1.4.1,ASANTE-SWITCH-MIB::eSWMonIPTable,,not-accessible,,mandatory,,This table describes the source IP address and
.1.3.6.1.4.1.298.1.5.1.4.1.1,ASANTE-SWITCH-MIB::eSWMonIPEntry,,not-accessible,eSWMonIP,mandatory,,The entry of this table. The table is
.1.3.6.1.4.1.298.1.5.1.4.1.1.1,ASANTE-SWITCH-MIB::eSWMonIP,IpAddress,read-only,,mandatory,,The IP address corresponding to the MAC address
.1.3.6.1.4.1.298.1.5.1.4.1.1.2,ASANTE-SWITCH-MIB::eSWMonMAC,OCTET,read-only,,mandatory,,The source MAC address of the monitor entry.
.1.3.6.1.4.1.298.1.5.1.4.1.1.3,ASANTE-SWITCH-MIB::eSWMonVLANID,INTEGER,read-only,,mandatory,,The VLAN number of this monitor address entry.
.1.3.6.1.4.1.298.1.5.1.4.1.1.4,ASANTE-SWITCH-MIB::eSWMonGrp,INTEGER,read-only,,mandatory,,The IP address is learned from which group
.1.3.6.1.4.1.298.1.5.1.4.1.1.5,ASANTE-SWITCH-MIB::eSWMonPort,INTEGER,read-only,,mandatory,,The port on which the IP address was learned
.1.3.6.1.4.1.298.2,ASANTE-AH1012-MIB::productId,,,,,,
.1.3.6.1.4.1.298.2.1,ASANTE-AH1012-MIB::adapterProductId,,,,,,
.1.3.6.1.4.1.298.2.2,ASANTE-AH1012-MIB::concProductId,,,,,,
.1.3.6.1.4.1.298.2.2.1,ASANTE-AH1012-MIB::hub1012,,,,,,
.1.3.6.1.4.1.298.2.2.1.0,ASANTE-AH1012-MIB::hub1012#,,,,,,
.1.3.6.1.4.1.298.2.2.1.0.1,ASANTE-AH1012-MIB::thresholdLev1,,,,,,The SNMP trap that is generated when an alarm  entry crosses its rising threshold or falling threshold, and  generates an event that is configured for sending SNMP  traps.
.1.3.6.1.4.1.298.2.2.1.0.2,ASANTE-AH1012-MIB::nodeSecuLevel1,,,,,,The SNMP trap that is generated when the MAC layer  address of the incoming frame from a particular port  does not match the pre-assigned address with that port,  and generates an event that is configured for sending  SNMP traps.
.1.3.6.1.4.1.298.2.2.2,ASANTE-AH1012-MIB::hub1012-bridge,,,,,,
.1.3.6.1.4.1.298.2.2.11,ASANTE-SWITCH-MIB::intraswitch,,,,,,
.1.3.6.1.4.1.298.2.2.12,ASANTE-SWITCH-MIB::intrastack,,,,,,
.1.3.6.1.4.1.298.2.2.13,ASANTE-SWITCH-MIB::friendlyswitch,,,,,,
.1.3.6.1.4.1.298.2.2.16,ASANTE-SWITCH-MIB::intraSwitch6216M,,,,,,
.1.3.6.1.4.1.298.2.2.17,ASANTE-SWITCH-MIB::intraSwitch6224,,,,,,
.1.3.6.1.4.1.298.2.2.22,ASANTE-SWITCH-MIB::intraCore8000,,,,,,
.1.3.6.1.4.1.298.2.2.23,ASANTE-SWITCH-MIB::intraCore9000,,,,,,
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
