.1.0,IEEE8021-PAE-MIB::std,,,,,,
.1.0.8802,IEEE8021-PAE-MIB::iso8802,,,,,,
.1.0.8802.1,IEEE8021-PAE-MIB::ieee802dot1,,,,,,
.1.0.8802.1.1,IEEE8021-PAE-MIB::ieee802dot1mibs,,,,,,
.1.0.8802.1.1.1,IEEE8021-PAE-MIB::ieee8021paeMIB,,,,,,The Port Access Entity module for managing IEEE 802.1X.
.1.0.8802.1.1.1.1,IEEE8021-PAE-MIB::paeMIBObjects,,,,,,
.1.0.8802.1.1.1.1.1,IEEE8021-PAE-MIB::dot1xPaeSystem,,,,,,
.1.0.8802.1.1.1.1.1.1,IEEE8021-PAE-MIB::dot1xPaeSystemAuthControl,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative enable/disable state for Port Access Control in a System.
.1.0.8802.1.1.1.1.1.2,IEEE8021-PAE-MIB::dot1xPaePortTable,,not-accessible,,current,,A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
.1.0.8802.1.1.1.1.1.2.1,IEEE8021-PAE-MIB::dot1xPaePortEntry,,not-accessible,dot1xPaePortNumber,current,,The Port number, protocol version, and initialization control for a Port.
.1.0.8802.1.1.1.1.1.2.1.1,IEEE8021-PAE-MIB::dot1xPaePortNumber,Integer32,not-accessible,,current,,The Port number associated with this Port.
.1.0.8802.1.1.1.1.1.2.1.2,IEEE8021-PAE-MIB::dot1xPaePortProtocolVersion,Unsigned32,read-only,,current,,The protocol version associated with this Port.
.1.0.8802.1.1.1.1.1.2.1.3,IEEE8021-PAE-MIB::dot1xPaePortCapabilities,BITS,read-only,,current,dot1xPaePortAuthCapable(0):dot1xPaePortSuppCapable(1),Indicates the PAE functionality that this Port supports and that may be managed through this MIB.
.1.0.8802.1.1.1.1.1.2.1.4,IEEE8021-PAE-MIB::dot1xPaePortInitialize,INTEGER,read-write,,current,true(1):false(2),The initialization control for this Port. Setting this attribute TRUE causes the Port to be initialized. The attribute value reverts to FALSE once initialization has completed.
.1.0.8802.1.1.1.1.1.2.1.5,IEEE8021-PAE-MIB::dot1xPaePortReauthenticate,INTEGER,read-write,,current,true(1):false(2),The reauthentication control for this port. Setting this attribute TRUE causes the Authenticator PAE state machine for the Port to reauthenticate the Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read.
.1.0.8802.1.1.1.1.2,IEEE8021-PAE-MIB::dot1xPaeAuthenticator,,,,,,
.1.0.8802.1.1.1.1.2.1,IEEE8021-PAE-MIB::dot1xAuthConfigTable,,not-accessible,,current,,A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.1.1,IEEE8021-PAE-MIB::dot1xAuthConfigEntry,,not-accessible,dot1xPaePortNumber,current,,The configuration information for an Authenticator PAE.
.1.0.8802.1.1.1.1.2.1.1.1,IEEE8021-PAE-MIB::dot1xAuthPaeState,INTEGER,read-only,,current,initialize(1):disconnected(2):connecting(3):authenticating(4):authenticated(5):aborting(6):held(7):forceAuth(8):forceUnauth(9):restart(10),The current value of the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.1.1.2,IEEE8021-PAE-MIB::dot1xAuthBackendAuthState,INTEGER,read-only,,current,request(1):response(2):success(3):fail(4):timeout(5):idle(6):initialize(7):ignore(8),The current state of the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.3,IEEE8021-PAE-MIB::dot1xAuthAdminControlledDirections,INTEGER,read-write,,current,both(0):in(1),The current value of the administrative controlled directions parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.4,IEEE8021-PAE-MIB::dot1xAuthOperControlledDirections,INTEGER,read-only,,current,both(0):in(1),The current value of the operational controlled directions parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.5,IEEE8021-PAE-MIB::dot1xAuthAuthControlledPortStatus,INTEGER,read-only,,current,authorized(1):unauthorized(2),The current value of the controlled Port status parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.6,IEEE8021-PAE-MIB::dot1xAuthAuthControlledPortControl,INTEGER,read-write,,current,forceUnauthorized(1):auto(2):forceAuthorized(3),The current value of the controlled Port control parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.7,IEEE8021-PAE-MIB::dot1xAuthQuietPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.1.1.8,IEEE8021-PAE-MIB::dot1xAuthTxPeriod,Unsigned32,read-write,,deprecated,,The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.1.1.9,IEEE8021-PAE-MIB::dot1xAuthSuppTimeout,Unsigned32,read-write,,deprecated,,The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.10,IEEE8021-PAE-MIB::dot1xAuthServerTimeout,Unsigned32,read-write,,current,,The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.11,IEEE8021-PAE-MIB::dot1xAuthMaxReq,Unsigned32,read-write,,deprecated,,The value of the maxReq constant currently in use by the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.12,IEEE8021-PAE-MIB::dot1xAuthReAuthPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.
.1.0.8802.1.1.1.1.2.1.1.13,IEEE8021-PAE-MIB::dot1xAuthReAuthEnabled,INTEGER,read-write,,current,true(1):false(2),The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1).
.1.0.8802.1.1.1.1.2.1.1.14,IEEE8021-PAE-MIB::dot1xAuthKeyTxEnabled,INTEGER,read-write,,current,true(1):false(2),The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.2,IEEE8021-PAE-MIB::dot1xAuthStatsTable,,not-accessible,,current,,A table that contains the statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.2.1,IEEE8021-PAE-MIB::dot1xAuthStatsEntry,,not-accessible,dot1xPaePortNumber,current,,The statistics information for an Authenticator PAE.
.1.0.8802.1.1.1.1.2.2.1.1,IEEE8021-PAE-MIB::dot1xAuthEapolFramesRx,Counter32,read-only,,current,,The number of valid EAPOL frames of any type that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.2,IEEE8021-PAE-MIB::dot1xAuthEapolFramesTx,Counter32,read-only,,current,,The number of EAPOL frames of any type that have been transmitted by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.3,IEEE8021-PAE-MIB::dot1xAuthEapolStartFramesRx,Counter32,read-only,,current,,The number of EAPOL Start frames that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.4,IEEE8021-PAE-MIB::dot1xAuthEapolLogoffFramesRx,Counter32,read-only,,current,,The number of EAPOL Logoff frames that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.5,IEEE8021-PAE-MIB::dot1xAuthEapolRespIdFramesRx,Counter32,read-only,,current,,The number of EAP Resp/Id frames that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.6,IEEE8021-PAE-MIB::dot1xAuthEapolRespFramesRx,Counter32,read-only,,current,,The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.7,IEEE8021-PAE-MIB::dot1xAuthEapolReqIdFramesTx,Counter32,read-only,,current,,The number of EAP Req/Id frames that have been transmitted by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.8,IEEE8021-PAE-MIB::dot1xAuthEapolReqFramesTx,Counter32,read-only,,current,,The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.9,IEEE8021-PAE-MIB::dot1xAuthInvalidEapolFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
.1.0.8802.1.1.1.1.2.2.1.10,IEEE8021-PAE-MIB::dot1xAuthEapLengthErrorFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
.1.0.8802.1.1.1.1.2.2.1.11,IEEE8021-PAE-MIB::dot1xAuthLastEapolFrameVersion,Unsigned32,read-only,,current,,The protocol version number carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.1.2.2.1.12,IEEE8021-PAE-MIB::dot1xAuthLastEapolFrameSource,OCTET,read-only,,current,,The source MAC address carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.1.2.3,IEEE8021-PAE-MIB::dot1xAuthDiagTable,,not-accessible,,deprecated,,A table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.3.1,IEEE8021-PAE-MIB::dot1xAuthDiagEntry,,not-accessible,dot1xPaePortNumber,deprecated,,The diagnostics information for an Authenticator PAE.
.1.0.8802.1.1.1.1.2.3.1.1,IEEE8021-PAE-MIB::dot1xAuthEntersConnecting,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions to the CONNECTING state from any other state.
.1.0.8802.1.1.1.1.2.3.1.2,IEEE8021-PAE-MIB::dot1xAuthEapLogoffsWhileConnecting,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.
.1.0.8802.1.1.1.1.2.3.1.3,IEEE8021-PAE-MIB::dot1xAuthEntersAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.4,IEEE8021-PAE-MIB::dot1xAuthAuthSuccessWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE).
.1.0.8802.1.1.1.1.2.3.1.5,IEEE8021-PAE-MIB::dot1xAuthAuthTimeoutsWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).
.1.0.8802.1.1.1.1.2.3.1.6,IEEE8021-PAE-MIB::dot1xAuthAuthFailWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).
.1.0.8802.1.1.1.1.2.3.1.7,IEEE8021-PAE-MIB::dot1xAuthAuthReauthsWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
.1.0.8802.1.1.1.1.2.3.1.8,IEEE8021-PAE-MIB::dot1xAuthAuthEapStartsWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.9,IEEE8021-PAE-MIB::dot1xAuthAuthEapLogoffWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.10,IEEE8021-PAE-MIB::dot1xAuthAuthReauthsWhileAuthenticated,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
.1.0.8802.1.1.1.1.2.3.1.11,IEEE8021-PAE-MIB::dot1xAuthAuthEapStartsWhileAuthenticated,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.12,IEEE8021-PAE-MIB::dot1xAuthAuthEapLogoffWhileAuthenticated,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.13,IEEE8021-PAE-MIB::dot1xAuthBackendResponses,Counter32,read-only,,deprecated,,Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.
.1.0.8802.1.1.1.1.2.3.1.14,IEEE8021-PAE-MIB::dot1xAuthBackendAccessChallenges,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.
.1.0.8802.1.1.1.1.2.3.1.15,IEEE8021-PAE-MIB::dot1xAuthBackendOtherRequestsToSupplicant,Counter32,read-only,,deprecated,,Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
.1.0.8802.1.1.1.1.2.3.1.16,IEEE8021-PAE-MIB::dot1xAuthBackendNonNakResponsesFromSupplicant,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method.
.1.0.8802.1.1.1.1.2.3.1.17,IEEE8021-PAE-MIB::dot1xAuthBackendAuthSuccesses,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.
.1.0.8802.1.1.1.1.2.3.1.18,IEEE8021-PAE-MIB::dot1xAuthBackendAuthFails,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.
.1.0.8802.1.1.1.1.2.4,IEEE8021-PAE-MIB::dot1xAuthSessionStatsTable,,not-accessible,,current,,A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.4.1,IEEE8021-PAE-MIB::dot1xAuthSessionStatsEntry,,not-accessible,dot1xPaePortNumber,current,,The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
.1.0.8802.1.1.1.1.2.4.1.1,IEEE8021-PAE-MIB::dot1xAuthSessionOctetsRx,Counter64,read-only,,current,,The number of octets received in user data frames on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.2,IEEE8021-PAE-MIB::dot1xAuthSessionOctetsTx,Counter64,read-only,,current,,The number of octets transmitted in user data frames on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.3,IEEE8021-PAE-MIB::dot1xAuthSessionFramesRx,Counter32,read-only,,current,,The number of user data frames received on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.4,IEEE8021-PAE-MIB::dot1xAuthSessionFramesTx,Counter32,read-only,,current,,The number of user data frames transmitted on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.5,IEEE8021-PAE-MIB::dot1xAuthSessionId,OCTET,read-only,,current,,A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
.1.0.8802.1.1.1.1.2.4.1.6,IEEE8021-PAE-MIB::dot1xAuthSessionAuthenticMethod,INTEGER,read-only,,current,remoteAuthServer(1):localAuthServer(2),The authentication method used to establish the session.
.1.0.8802.1.1.1.1.2.4.1.7,IEEE8021-PAE-MIB::dot1xAuthSessionTime,TimeTicks,read-only,,current,,The duration of the session in seconds.
.1.0.8802.1.1.1.1.2.4.1.8,IEEE8021-PAE-MIB::dot1xAuthSessionTerminateCause,INTEGER,read-only,,current,supplicantLogoff(1):portFailure(2):supplicantRestart(3):reauthFailed(4):authControlForceUnauth(5):portReInit(6):portAdminDisabled(7):notTerminatedYet(999),The reason for the session termination.
.1.0.8802.1.1.1.1.2.4.1.9,IEEE8021-PAE-MIB::dot1xAuthSessionUserName,OCTET,read-only,,current,,The User-Name representing the identity of the Supplicant PAE.
.1.0.8802.1.1.1.1.3,IEEE8021-PAE-MIB::dot1xPaeSupplicant,,,,,,
.1.0.8802.1.1.1.1.3.1,IEEE8021-PAE-MIB::dot1xSuppConfigTable,,not-accessible,,current,,A table that contains the configuration objects for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system.
.1.0.8802.1.1.1.1.3.1.1,IEEE8021-PAE-MIB::dot1xSuppConfigEntry,,not-accessible,dot1xPaePortNumber,current,,The configuration information for a Supplicant PAE.
.1.0.8802.1.1.1.1.3.1.1.1,IEEE8021-PAE-MIB::dot1xSuppPaeState,INTEGER,read-only,,current,disconnected(1):logoff(2):connecting(3):authenticating(4):authenticated(5):acquired(6):held(7):restart(8):sForceAuth(9):sForceUnauth(10),The current state of the Supplicant PAE state machine (8.5.8).
.1.0.8802.1.1.1.1.3.1.1.2,IEEE8021-PAE-MIB::dot1xSuppHeldPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the heldPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.3,IEEE8021-PAE-MIB::dot1xSuppAuthPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the authPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.4,IEEE8021-PAE-MIB::dot1xSuppStartPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the startPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.5,IEEE8021-PAE-MIB::dot1xSuppMaxStart,Unsigned32,read-write,,current,,The value of the maxStart constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.6,IEEE8021-PAE-MIB::dot1xSuppControlledPortStatus,INTEGER,read-only,,current,authorized(1):unauthorized(2),The current state of the Supplicant PAE state machine (8.5.8).
.1.0.8802.1.1.1.1.3.1.1.7,IEEE8021-PAE-MIB::dot1xSuppAccessCtrlWithAuth,INTEGER,read-write,,current,inactive(1):active(2),The setting for the application of the Supplicant authorization state when the port is operating as both a Supplicant and an Authenticator. inactive indicates the port will not apply the the Supplicant authorization state, using only the Authenticator authorization  state to restrict access to the port. active indicates the port will apply the the Supplicant authorization state, as well as the Authenticator authorization state.
.1.0.8802.1.1.1.1.3.1.1.8,IEEE8021-PAE-MIB::dot1xSuppBackendState,INTEGER,read-only,,current,initialize(1):idle(2):request(3):response(4):receive(5):fail(6):success(7):timeout(8),The current state of the Supplicant Backend state
.1.0.8802.1.1.1.1.3.2,IEEE8021-PAE-MIB::dot1xSuppStatsTable,,not-accessible,,current,,A table that contains the statistics objects for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system.
.1.0.8802.1.1.1.1.3.2.1,IEEE8021-PAE-MIB::dot1xSuppStatsEntry,,not-accessible,dot1xPaePortNumber,current,,The statistics information for a Supplicant PAE.
.1.0.8802.1.1.1.1.3.2.1.1,IEEE8021-PAE-MIB::dot1xSuppEapolFramesRx,Counter32,read-only,,current,,The number of EAPOL frames of any type that have been received by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.2,IEEE8021-PAE-MIB::dot1xSuppEapolFramesTx,Counter32,read-only,,current,,The number of EAPOL frames of any type that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.3,IEEE8021-PAE-MIB::dot1xSuppEapolStartFramesTx,Counter32,read-only,,current,,The number of EAPOL Start frames that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.4,IEEE8021-PAE-MIB::dot1xSuppEapolLogoffFramesTx,Counter32,read-only,,current,,The number of EAPOL Logoff frames that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.5,IEEE8021-PAE-MIB::dot1xSuppEapolRespIdFramesTx,Counter32,read-only,,deprecated,,The number of EAP Resp/Id frames that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.6,IEEE8021-PAE-MIB::dot1xSuppEapolRespFramesTx,Counter32,read-only,,deprecated,,The number of valid EAP Response frames (other than Resp/Id frames) that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.7,IEEE8021-PAE-MIB::dot1xSuppEapolReqIdFramesRx,Counter32,read-only,,deprecated,,The number of EAP Req/Id frames that have been received by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.8,IEEE8021-PAE-MIB::dot1xSuppEapolReqFramesRx,Counter32,read-only,,deprecated,,The number of EAP Request frames (other than Rq/Id frames) that have been received by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.9,IEEE8021-PAE-MIB::dot1xSuppInvalidEapolFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Supplicant in which the frame type is not recognized.
.1.0.8802.1.1.1.1.3.2.1.10,IEEE8021-PAE-MIB::dot1xSuppEapLengthErrorFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Supplicant in which the Packet Body Length field (7.5.5) is invalid.
.1.0.8802.1.1.1.1.3.2.1.11,IEEE8021-PAE-MIB::dot1xSuppLastEapolFrameVersion,Unsigned32,read-only,,current,,The protocol version number carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.1.3.2.1.12,IEEE8021-PAE-MIB::dot1xSuppLastEapolFrameSource,OCTET,read-only,,current,,The source MAC address carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.2,IEEE8021-PAE-MIB::dot1xPaeConformance,,,,,,
.1.0.8802.1.1.1.2.1,IEEE8021-PAE-MIB::dot1xPaeGroups,,,,,,
.1.0.8802.1.1.1.2.1.1,IEEE8021-PAE-MIB::dot1xPaeSystemGroup,,,,,,A collection of objects providing system information about, and control over, a PAE.
.1.0.8802.1.1.1.2.1.2,IEEE8021-PAE-MIB::dot1xPaeAuthConfigGroup,,,,,,A collection of objects providing configuration information about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.3,IEEE8021-PAE-MIB::dot1xPaeAuthStatsGroup,,,,,,A collection of objects providing statistics about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.4,IEEE8021-PAE-MIB::dot1xPaeAuthDiagGroup,,,,,,A collection of objects providing diagnostic statistics about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.5,IEEE8021-PAE-MIB::dot1xPaeAuthSessionStatsGroup,,,,,,A collection of objects providing statistics about the current, or last session for an Authenticator PAE.
.1.0.8802.1.1.1.2.1.6,IEEE8021-PAE-MIB::dot1xPaeSuppConfigGroup,,,,,,A collection of objects providing configuration information about a Supplicant PAE.
.1.0.8802.1.1.1.2.1.7,IEEE8021-PAE-MIB::dot1xPaeSuppStatsGroup,,,,,,A collection of objects providing statistics about a Supplicant PAE.
.1.0.8802.1.1.1.2.1.8,IEEE8021-PAE-MIB::dot1xPaeAuthConfigGroup2,,,,,,A collection of objects providing configuration information about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.9,IEEE8021-PAE-MIB::dot1xPaeSuppConfigGroup2,,,,,,A collection of objects providing configuration information about a Supplicant PAE.
.1.0.8802.1.1.1.2.1.10,IEEE8021-PAE-MIB::dot1xPaeSuppStatsGroup2,,,,,,A collection of objects providing statistics about a Supplicant PAE.
.1.0.8802.1.1.1.2.2,IEEE8021-PAE-MIB::dot1xPaeCompliances,,,,,,
.1.0.8802.1.1.1.2.2.1,IEEE8021-PAE-MIB::dot1xPaeCompliance,,,,,,The compliance statement for device support of Port Access Control.
.1.0.8802.1.1.1.2.2.2,IEEE8021-PAE-MIB::dot1xPaeCompliance2,,,,,,The compliance statement for device support of Port Access Control.
.1.2,IEEE8023-LAG-MIB::member-body,,,,,,
.1.2.840,IEEE8023-LAG-MIB::us,,,,,,
.1.2.840.10006,IEEE8023-LAG-MIB::ieee802dot3,,,,,,
.1.2.840.10006.300,IEEE8023-LAG-MIB::snmpmibs,,,,,,
.1.2.840.10006.300.43,IEEE8023-LAG-MIB::lagMIB,,,,,,The Link Aggregation module for managing IEEE 802.1AX-2014 as updated by 802.1AX-2014-Cor1.
.1.2.840.10006.300.43.0,IEEE8023-LAG-MIB::lagMIBNotifications,,,,,,
.1.2.840.10006.300.43.0.1,IEEE8023-LAG-MIB::dot3adAggLinkUpNotification,,,,,,When aAggLinkUpDownNotificationEnable is set to 'enabled,' a Link Up notification is generated when the Operational State of the Aggregator changes from 'down' to 'up.' When aAggLinkUpDownNotificationEnable is set to 'disabled,' no Link Up notifications are generated. The notification carries the identifier of the Aggregator whose state has changed.
.1.2.840.10006.300.43.0.2,IEEE8023-LAG-MIB::dot3adAggLinkDownNotification,,,,,,When aAggLinkUpDownNotificationEnable is set to 'enabled,' a Link Down notification is generated when the Operational State of the Aggregator changes from 'up' to 'down.' When aAggLinkUpDownNotificationEnable is set to 'disabled,' no Link Down notifications are generated. The notification carries the identifier of the Aggregator whose state has changed.
.1.2.840.10006.300.43.1,IEEE8023-LAG-MIB::lagMIBObjects,,,,,,
.1.2.840.10006.300.43.1.1,IEEE8023-LAG-MIB::dot3adAgg,,,,,,
.1.2.840.10006.300.43.1.1.1,IEEE8023-LAG-MIB::dot3adAggTable,,not-accessible,,current,,A table that contains information about every Aggregator that is associated with this System.
.1.2.840.10006.300.43.1.1.1.1,IEEE8023-LAG-MIB::dot3adAggEntry,,not-accessible,dot3adAggIndex,current,,A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator.
.1.2.840.10006.300.43.1.1.1.1.1,IEEE8023-LAG-MIB::dot3adAggIndex,Integer32,not-accessible,,current,,The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only. NOTE-The aAggID is represented in the SMIv2 MIB as an ifIndex-see D.4.1.
.1.2.840.10006.300.43.1.1.1.1.2,IEEE8023-LAG-MIB::dot3adAggMACAddress,OCTET,read-only,,current,,A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.
.1.2.840.10006.300.43.1.1.1.1.3,IEEE8023-LAG-MIB::dot3adAggActorSystemPriority,Integer32,read-write,,current,,A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
.1.2.840.10006.300.43.1.1.1.1.4,IEEE8023-LAG-MIB::dot3adAggActorSystemID,OCTET,read-write,,current,,A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 6, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 6.7).
.1.2.840.10006.300.43.1.1.1.1.5,IEEE8023-LAG-MIB::dot3adAggAggregateOrIndividual,INTEGER,read-only,,current,true(1):false(2),A read-only Boolean value indicating whether the Aggregator represents an Aggregate ('TRUE') or an Individual link ('FALSE').
.1.2.840.10006.300.43.1.1.1.1.6,IEEE8023-LAG-MIB::dot3adAggActorAdminKey,Integer32,read-write,,current,,The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 6.7.2. This is a 16-bit read-write value. The meaning of particular Key values is of local significance. For an Aggregator that is associated with a Portal, the aAggActorAdminKey has to be different for each Portal System. Specifically the two most significant bits are set to aDrniPortalSystemNumber (7.4.1.1.7). The lower 14 bits may be any value, have  to be the same in each Portal System within the same Portal,
.1.2.840.10006.300.43.1.1.1.1.7,IEEE8023-LAG-MIB::dot3adAggActorOperKey,Integer32,read-only,,current,,The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 6.7.2. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
.1.2.840.10006.300.43.1.1.1.1.8,IEEE8023-LAG-MIB::dot3adAggPartnerSystemID,OCTET,read-only,,current,,A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this  System ID value will be a value assigned by the local System.
.1.2.840.10006.300.43.1.1.1.1.9,IEEE8023-LAG-MIB::dot3adAggPartnerSystemPriority,Integer32,read-only,,current,,A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.
.1.2.840.10006.300.43.1.1.1.1.10,IEEE8023-LAG-MIB::dot3adAggPartnerOperKey,Integer32,read-only,,current,,The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.
.1.2.840.10006.300.43.1.1.1.1.11,IEEE8023-LAG-MIB::dot3adAggCollectorMaxDelay,Integer32,read-write,,current,,The value of this 16-bit read-write attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser, and either delivering the frame to its Aggregator Client or discarding the frame (see 6.2.3.1.1).
.1.2.840.10006.300.43.1.1.2,IEEE8023-LAG-MIB::dot3adAggPortListTable,,not-accessible,,current,,A table that contains a list of all the ports associated with each Aggregator.
.1.2.840.10006.300.43.1.1.2.1,IEEE8023-LAG-MIB::dot3adAggPortListEntry,,not-accessible,dot3adAggIndex,current,,A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator.
.1.2.840.10006.300.43.1.1.2.1.1,IEEE8023-LAG-MIB::dot3adAggPortListPorts,OCTET,read-only,,current,,The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.
.1.2.840.10006.300.43.1.1.3,IEEE8023-LAG-MIB::dot3adAggXTable,,not-accessible,,current,,A table that extends dot3adAggTable.
.1.2.840.10006.300.43.1.1.3.1,IEEE8023-LAG-MIB::dot3adAggXEntry,,not-accessible,,current,,A list of extension parameters for the Aggregator Configuration Table
.1.2.840.10006.300.43.1.1.3.1.1,IEEE8023-LAG-MIB::dot3adAggDescription,OCTET,read-only,,current,,A human-readable text string containing information about the Aggregator. This string could include information about the distribution algorithm in use on this Aggregator; for example, 'Aggregator 1, Dist Alg=Dest MAC address.' This string is read-only. The contents are vendor specific.
.1.2.840.10006.300.43.1.1.3.1.2,IEEE8023-LAG-MIB::dot3adAggName,OCTET,read-write,,current,,A human-readable text string containing a locally significant name for the Aggregator. This string is read-write.
.1.2.840.10006.300.43.1.1.3.1.3,IEEE8023-LAG-MIB::dot3adAggAdminState,INTEGER,read-write,,current,up(1):down(2),This read-write value defines the administrative state of the Aggregator. A value of 'up' indicates that the operational state of the Aggregator (aAggOperState) is permitted to be either up or down. A value of 'down' forces the operational state of the Aggregator to be down. Changes to the administrative state affect the operational state of the Aggregator only, not the operational state of the Aggregation Ports that are attached to the Aggregator. A GET operation returns the current administrative state. A SET operation changes the administrative state to a new value.
.1.2.840.10006.300.43.1.1.3.1.4,IEEE8023-LAG-MIB::dot3adAggOperState,INTEGER,read-only,,current,up(1):down(2),This read-only value defines the operational state of the Aggregator. An operational state of 'up' indicates that the Aggregator is available for use by the Aggregator Client; a value of 'down' indicates that the Aggregator is not available for use by the Aggregator Client.
.1.2.840.10006.300.43.1.1.3.1.5,IEEE8023-LAG-MIB::dot3adAggTimeOfLastOperChange,Integer32,read-only,,current,,The time at which the interface entered its current operational state, in terms of centiseconds since the system was last reset. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a value of zero. The ifLastChange object in the Interfaces MIB defined in IETF RFC 2863 is a suitable object for supplying a value for aAggTimeOfLastOperChange. This value is read-only. the aTimeSinceSystemReset variable of IEEE Std 802.3-2008, F.2.1, in earlier versions of this standard. aTimeSinceSystemReset and ifLastChange have the same meaning.
.1.2.840.10006.300.43.1.1.3.1.6,IEEE8023-LAG-MIB::dot3adAggDataRate,Integer32,read-only,,current,,The current data rate, in bits per second, of the aggregate link. The value is calculated as the sum of the data rate of each link in the aggregation. This attribute is read-only.
.1.2.840.10006.300.43.1.1.3.1.7,IEEE8023-LAG-MIB::dot3adAggOctetsTxOK,Counter64,read-only,,current,,A count of the data and padding octets transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation. The count does not include octets transmitted by the Aggregator in frames that carry LACPDUs or Marker PDUs (7.3.3.1.7, 7.3.3.1.8, 7.3.3.1.9). However, it includes frames discarded by the Frame Distribution function of the Aggregator (7.3.1.1.25). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.8,IEEE8023-LAG-MIB::dot3adAggOctetsRxOK,Counter64,read-only,,current,,A count of the data and padding octets received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation. The count does not include octets received in frames that carry LACP or Marker PDUs (7.3.3.1.2, 7.3.3.1.3, 7.3.3.1.4), or frames discarded by the Frame Collection function of the Aggregator (7.3.1.1.26). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.9,IEEE8023-LAG-MIB::dot3adAggFramesTxOK,Counter64,read-only,,current,,A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames transmitted by the Aggregator that carry LACP or Marker PDUs (7.3.3.1.7, 7.3.3.1.8, 7.3.3.1.9). However, it includes frames discarded by the Frame Distribution function of the Aggregator (7.3.1.1.25). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.10,IEEE8023-LAG-MIB::dot3adAggFramesRxOK,Counter64,read-only,,current,,A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames that carry LACP or Marker PDUs (7.3.3.1.2, 7.3.3.1.3, 7.3.3.1.4), or frames discarded by the Frame Collection function of the Aggregator (7.3.1.1.26). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.11,IEEE8023-LAG-MIB::dot3adAggMulticastFramesTxOK,Counter64,read-only,,current,,A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation, to a group DA other than the broadcast address. The count does not include frames transmitted by the Aggregator that carry LACP or Marker PDUs (7.3.3.1.7, 7.3.3.1.8, 7.3.3.1.9). However, it includes frames discarded by the Frame Distribution function of the Aggregator (7.3.1.1.25). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.12,IEEE8023-LAG-MIB::dot3adAggMulticastFramesRxOK,Counter64,read-only,,current,,A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation, that were addressed to an active group address other than the broadcast address. The count does not include frames that carry LACP or Marker PDUs (7.3.3.1.2, 7.3.3.1.3, 7.3.3.1.4), or frames discarded by the Frame Collection function of the Aggregator (7.3.1.1.26). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.13,IEEE8023-LAG-MIB::dot3adAggBroadcastFramesTxOK,Counter64,read-only,,current,,A count of the broadcast data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames transmitted by the Aggregator that carry LACP or Marker PDUs (7.3.3.1.7, 7.3.3.1.8, 7.3.3.1.9). However, it includes frames discarded by the Frame Distribution function of the Aggregator (7.3.1.1.25). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.14,IEEE8023-LAG-MIB::dot3adAggBroadcastFramesRxOK,Counter64,read-only,,current,,A count of the broadcast data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames that carry LACP or Marker PDUs (7.3.3.1.2, 7.3.3.1.3, 7.3.3.1.4), illegal or unknown protocol frames (7.3.3.1.5, 7.3.3.1.6), or frames discarded by the Frame Collection function of the Aggregator (7.3.1.1.26). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.15,IEEE8023-LAG-MIB::dot3adAggFramesDiscardedOnTx,Counter64,read-only,,current,,A count of data frames requested to be transmitted by this Aggregator that were discarded by the Frame Distribution function of the Aggregator when conversations are reallocated to different Aggregation Ports, due to the requirement to ensure that the conversations are flushed on the old Aggregation Ports in order to maintain proper frame ordering (B.3), or discarded as a result of excessive collisions by Aggregation Ports that are (or have been) members of the aggregation. This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.16,IEEE8023-LAG-MIB::dot3adAggFramesDiscardedOnRx,Counter64,read-only,,current,,A count of data frames, received on all Aggregation Ports that are (or have been) members of the aggregation, that were discarded by the Frame Collection function of the Aggregator as they were received on Aggregation Ports whose Frame Collection function was disabled. This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.17,IEEE8023-LAG-MIB::dot3adAggFramesWithTxErrors,Counter64,read-only,,current,,A count of data frames requested to be transmitted by this Aggregator that experienced transmission errors on Aggregation Ports that are (or have been) members of the aggregation. This count does not include frames discarded due to excess collisions. This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.18,IEEE8023-LAG-MIB::dot3adAggFramesWithRxErrors,Counter64,read-only,,current,,A count of data frames discarded on reception by all Aggregation Ports that are (or have been) members of the aggregation, or that were discarded by the Frame Collection function of the Aggregator, or that were discarded by the Aggregator due to the detection of an illegal Slow Protocols PDU (7.3.3.1.6). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.19,IEEE8023-LAG-MIB::dot3adAggUnknownProtocolFrames,Counter64,read-only,,current,,A count of data frames discarded on reception by all Aggregation Ports that are (or have been) members of the aggregation, due to the detection of an unknown Slow Protocols PDU (7.3.3.1.5). This value is read-only.
.1.2.840.10006.300.43.1.1.3.1.20,IEEE8023-LAG-MIB::dot3adAggLinkUpDownNotificationEnable,INTEGER,read-write,,current,enabled(1):disabled(2),When set to 'enabled', Link Up and Link Down notifications are enabled for this Aggregator. When set to 'disabled', Link Up and Link Down notifications are disabled for this Aggregator. This value is read-write.
.1.2.840.10006.300.43.1.1.3.1.21,IEEE8023-LAG-MIB::dot3adAggPortAlgorithm,OCTET,read-write,,current,,This object identifies the algorithm used by the Aggregator to assign frames to a Port Conversation ID. Table 6-4 provides the IEEE 802.1 OUI (00-80-C2) Port Algorithm encodings. A SEQUENCE following octet.
.1.2.840.10006.300.43.1.1.3.1.22,IEEE8023-LAG-MIB::dot3adAggPartnerAdminPortAlgorithm,OCTET,read-write,,current,,This object identifies the value for the algorithm of the Partner System, assigned by administrator or System policy for use when the Partner's information is unknown. Table 6-4 provides the IEEE 802.1 OUI (00-80-C2) Port Algorithm encodings. Its default value is set to the 'Unspecified' value 
.1.2.840.10006.300.43.1.1.3.1.23,IEEE8023-LAG-MIB::dot3adAggPartnerAdminPortConversationListDigest,OCTET,read-write,,current,,The value for the digest of the prioritized Port Conversation ID-to-Link Number ID assignments of the Partner System, assigned by administrator or System policy for use when the Partner's information is unknown. Its default value is set to NULL.
.1.2.840.10006.300.43.1.1.3.1.24,IEEE8023-LAG-MIB::dot3adAggAdminDiscardWrongConversation,INTEGER,read-write,,deprecated,true(1):false(2),The administrative value that determines what the Aggregator Collection_Conversation_Mask. The value 'TRUE' indicates that
.1.2.840.10006.300.43.1.1.3.1.25,IEEE8023-LAG-MIB::dot3adAggPartnerAdminConvServiceMappingDigest,OCTET,read-write,,current,,The value for the digest of the Port Conversation ID-to-Service ID assignments of the Partner System, assigned by administrator or System policy for use when the Partner's information is unknown. Its default value is set to NULL.
.1.2.840.10006.300.43.1.1.3.1.26,IEEE8023-LAG-MIB::dot3adAggAdminDiscardWrongConversation2,INTEGER,read-write,,current,forceTrue(1):forceFalse(2):auto(3),The administrative value that determines whether an Aggregator Collection_Conversation_Mask. The value 'forceTrue' 
.1.2.840.10006.300.43.1.1.4,IEEE8023-LAG-MIB::dot3adAggConversationAdminLinkTable,,not-accessible,,current,,There are 4096 aAggConversationAdminPort[] variables, aAggConversationAdminLink[0] through aAggConversationAdminLink[4095], indexed by Port Conversation ID. Each contains administrative values of the link selection priority list for the referenced Port Conversation ID. This selection priority list is a sequence of Link-Number IDs for each Port Conversation ID, in the order of preference, highest to lowest, for the corresponding link to carry that Port Conversation ID. A 16-bit zero value is used to indicate that no link is assigned to carry the associated Port Conversation ID. NOTE - This mapping of Port Conversation IDs to Link Number IDs is the fundamental administrative input. An equivalent mapping of Port Conversation IDs to Port  IDs [Conversation_PortList[]] is derived from this and  used internally. NOTE - When a network administrator  issues a command for selection rules, provided by aAggConversationAdminLink[], the ChangeActorOperDist is set as  specified in 6.6.2.2.
.1.2.840.10006.300.43.1.1.4.1,IEEE8023-LAG-MIB::dot3adAggConversationAdminLinkEntry,,not-accessible,dot3adAggConversationAdminLinkId:dot3adAggIndex,current,,An entry contains administrative values of the link selection priority list for the referenced Port Conversation ID. This selection priority list is a sequence of Link-Number IDs for each Port Conversation ID, in the order of preference, highest to lowest, for the corresponding link to carry that Port Conversation ID. A 16 bit zero value is used to indicate that no link is assigned to carry the associated Port Conversation ID.
.1.2.840.10006.300.43.1.1.4.1.1,IEEE8023-LAG-MIB::dot3adAggConversationAdminLinkId,Integer32,not-accessible,,current,,An identifier for Port Conversation.
.1.2.840.10006.300.43.1.1.4.1.2,IEEE8023-LAG-MIB::dot3adAggConversationAdminLinkList,OCTET,read-write,,current,,Each two octets of the octet string represent the agreed Link Number ID that is assigned to an Aggregation Port (7.3.2.1.27). The list is in the order of preference, highest to lowest, for corresponding preferred link to carry that Port Conversation ID.
.1.2.840.10006.300.43.1.1.5,IEEE8023-LAG-MIB::dot3adAggAdminServiceConversationMapTable,,not-accessible,,current,,There are 4096 aAggAdminServiceConversationMap[] variables, aAggAdminServiceConversationMap[0] through aAggAdminServiceConversationMap[4095], indexed by Port Conversation ID. Each contains, in general, a set of Service IDs (8.2.2), unique within the array. If the Service IDs are representing VIDs, only a single VID is used, while in the case that Service IDs are representing I-SIDs, more than one I-SIDs are possible. Service IDs not contained in the map are not mapped to any Port Conversation ID and will be discarded.
.1.2.840.10006.300.43.1.1.5.1,IEEE8023-LAG-MIB::dot3adAggAdminServiceConversationMapEntry,,not-accessible,dot3adAggAdminServiceConversationMapId:dot3adAggIndex,current,,An entry contains, in general, a set of Service IDs (8.2.2), unique within the array. If the Service IDs are representing VIDs, only a single VID is applicable, while in the case that Service IDs are representing I-SIDs, more than one I-SIDs are possible.
.1.2.840.10006.300.43.1.1.5.1.1,IEEE8023-LAG-MIB::dot3adAggAdminServiceConversationMapId,Integer32,not-accessible,,current,,The Port Conversation ID used to index Conversation Map entries.
.1.2.840.10006.300.43.1.1.5.1.2,IEEE8023-LAG-MIB::dot3adAggAdminServiceConversationServiceIDList,OCTET,read-write,,current,,A list contains, in general, a set of Service IDs (8.2.2), unique within the array.
.1.2.840.10006.300.43.1.2,IEEE8023-LAG-MIB::dot3adAggPort,,,,,,
.1.2.840.10006.300.43.1.2.1,IEEE8023-LAG-MIB::dot3adAggPortTable,,not-accessible,,current,,A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
.1.2.840.10006.300.43.1.2.1.1,IEEE8023-LAG-MIB::dot3adAggPortEntry,,not-accessible,dot3adAggPortIndex,current,,A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
.1.2.840.10006.300.43.1.2.1.1.1,IEEE8023-LAG-MIB::dot3adAggPortIndex,Integer32,not-accessible,,current,,The unique identifier allocated to this Aggregation Port by the local System. This attribute identifies an Aggregation Port instance among the subordinate managed objects of the containing object. This value is read-only. NOTE-The aAggPortID is represented in the SMIv2 MIB as an ifIndex-see D.4.1.
.1.2.840.10006.300.43.1.2.1.1.2,IEEE8023-LAG-MIB::dot3adAggPortActorSystemPriority,Integer32,read-write,,current,,A 2-octet read-write value used to define the priority value associated with the Actor's System ID.
.1.2.840.10006.300.43.1.2.1.1.3,IEEE8023-LAG-MIB::dot3adAggPortActorSystemID,OCTET,read-only,,current,,A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this  Aggregation Port.
.1.2.840.10006.300.43.1.2.1.1.4,IEEE8023-LAG-MIB::dot3adAggPortActorAdminKey,Integer32,read-write,,current,,The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
.1.2.840.10006.300.43.1.2.1.1.5,IEEE8023-LAG-MIB::dot3adAggPortActorOperKey,Integer32,read-only,,current,,The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
.1.2.840.10006.300.43.1.2.1.1.6,IEEE8023-LAG-MIB::dot3adAggPortPartnerAdminSystemPriority,Integer32,read-write,,current,,A 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
.1.2.840.10006.300.43.1.2.1.1.7,IEEE8023-LAG-MIB::dot3adAggPortPartnerOperSystemPriority,Integer32,read-only,,current,,A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner.
.1.2.840.10006.300.43.1.2.1.1.8,IEEE8023-LAG-MIB::dot3adAggPortPartnerAdminSystemID,OCTET,read-write,,current,,A 6-octet read-write MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
.1.2.840.10006.300.43.1.2.1.1.9,IEEE8023-LAG-MIB::dot3adAggPortPartnerOperSystemID,OCTET,read-only,,current,,A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner.
.1.2.840.10006.300.43.1.2.1.1.10,IEEE8023-LAG-MIB::dot3adAggPortPartnerAdminKey,Integer32,read-write,,current,,The current administrative value of the Key for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
.1.2.840.10006.300.43.1.2.1.1.11,IEEE8023-LAG-MIB::dot3adAggPortPartnerOperKey,Integer32,read-only,,current,,The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value.
.1.2.840.10006.300.43.1.2.1.1.12,IEEE8023-LAG-MIB::dot3adAggPortSelectedAggID,Integer32,read-only,,current,,The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.
.1.2.840.10006.300.43.1.2.1.1.13,IEEE8023-LAG-MIB::dot3adAggPortAttachedAggID,Integer32,read-only,,current,,The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.
.1.2.840.10006.300.43.1.2.1.1.14,IEEE8023-LAG-MIB::dot3adAggPortActorPort,Integer32,read-only,,current,,The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.
.1.2.840.10006.300.43.1.2.1.1.15,IEEE8023-LAG-MIB::dot3adAggPortActorPortPriority,Integer32,read-write,,current,,The priority value assigned to this Aggregation Port. This 16-bit value is read-write. NOTE-In the case of DRNI (Clause 9), the two least significant bits of the priority for each Aggregation Port in a Distributed Relay's Aggregator Port will be ignored because these bits are used to encode the Portal System Number [item e) in 9.3.3].
.1.2.840.10006.300.43.1.2.1.1.16,IEEE8023-LAG-MIB::dot3adAggPortPartnerAdminPort,Integer32,read-write,,current,,The current administrative value of the port number for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
.1.2.840.10006.300.43.1.2.1.1.17,IEEE8023-LAG-MIB::dot3adAggPortPartnerOperPort,Integer32,read-only,,current,,The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.
.1.2.840.10006.300.43.1.2.1.1.18,IEEE8023-LAG-MIB::dot3adAggPortPartnerAdminPortPriority,Integer32,read-write,,current,,The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation.
.1.2.840.10006.300.43.1.2.1.1.19,IEEE8023-LAG-MIB::dot3adAggPortPartnerOperPortPriority,Integer32,read-only,,current,,The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only.
.1.2.840.10006.300.43.1.2.1.1.20,IEEE8023-LAG-MIB::dot3adAggPortActorAdminState,BITS,read-write,,current,lacpActivity(0):lacpTimeout(1):aggregation(2):synchronization(3):collecting(4):distributing(5):defaulted(6):expired(7),A string of 8 bits, corresponding to the administrative values of Actor_State (5.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-write.
.1.2.840.10006.300.43.1.2.1.1.21,IEEE8023-LAG-MIB::dot3adAggPortActorOperState,BITS,read-only,,current,lacpActivity(0):lacpTimeout(1):aggregation(2):synchronization(3):collecting(4):distributing(5):defaulted(6):expired(7),A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 7.3.2.1.20. This attribute value is read-only.
.1.2.840.10006.300.43.1.2.1.1.22,IEEE8023-LAG-MIB::dot3adAggPortPartnerAdminState,BITS,read-write,,current,lacpActivity(0):lacpTimeout(1):aggregation(2):synchronization(3):collecting(4):distributing(5):defaulted(6):expired(7),A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in 7.3.2.1.20. This attribute value is read-write. The assigned value is used in order to achieve manually configured aggregation.
.1.2.840.10006.300.43.1.2.1.1.23,IEEE8023-LAG-MIB::dot3adAggPortPartnerOperState,BITS,read-only,,current,lacpActivity(0):lacpTimeout(1):aggregation(2):synchronization(3):collecting(4):distributing(5):defaulted(6):expired(7),A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in 7.3.2.1.20. In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only.
.1.2.840.10006.300.43.1.2.1.1.24,IEEE8023-LAG-MIB::dot3adAggPortAggregateOrIndividual,INTEGER,read-only,,current,true(1):false(2),A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate ('TRUE') or is only able to operate as an Individual link ('FALSE').
.1.2.840.10006.300.43.1.2.2,IEEE8023-LAG-MIB::dot3adAggPortStatsTable,,not-accessible,,current,,A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port.
.1.2.840.10006.300.43.1.2.2.1,IEEE8023-LAG-MIB::dot3adAggPortStatsEntry,,not-accessible,dot3adAggPortIndex,current,,A list of Link Aggregation Control Protocol statistics for each port on this device.
.1.2.840.10006.300.43.1.2.2.1.1,IEEE8023-LAG-MIB::dot3adAggPortStatsLACPDUsRx,Counter32,read-only,,current,,The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
.1.2.840.10006.300.43.1.2.2.1.2,IEEE8023-LAG-MIB::dot3adAggPortStatsMarkerPDUsRx,Counter32,read-only,,current,,The number of valid Marker PDUs received on this Aggregation Port. This value is read-only.
.1.2.840.10006.300.43.1.2.2.1.3,IEEE8023-LAG-MIB::dot3adAggPortStatsMarkerResponsePDUsRx,Counter32,read-only,,current,,The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only.
.1.2.840.10006.300.43.1.2.2.1.4,IEEE8023-LAG-MIB::dot3adAggPortStatsUnknownRx,Counter32,read-only,,current,,The number of frames received that either: - carry the Slow Protocols Ethernet Type value (IEEE Std 802.3-2008, Annex 57A.4), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (IEEE Std 802.3-2008, Annex 57A.3), but do not carry the Slow Protocols Ethernet Type. This value is read-only.
.1.2.840.10006.300.43.1.2.2.1.5,IEEE8023-LAG-MIB::dot3adAggPortStatsIllegalRx,Counter32,read-only,,current,,The number of frames received that carry the Slow Protocols Ethernet Type value (IEEE Std 802.3-2008, Annex 57A.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (IEEE Std 802.3-2008, Annex 57A.3). This value is read-only.
.1.2.840.10006.300.43.1.2.2.1.6,IEEE8023-LAG-MIB::dot3adAggPortStatsLACPDUsTx,Counter32,read-only,,current,,The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
.1.2.840.10006.300.43.1.2.2.1.7,IEEE8023-LAG-MIB::dot3adAggPortStatsMarkerPDUsTx,Counter32,read-only,,current,,The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only.
.1.2.840.10006.300.43.1.2.2.1.8,IEEE8023-LAG-MIB::dot3adAggPortStatsMarkerResponsePDUsTx,Counter32,read-only,,current,,The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only.
.1.2.840.10006.300.43.1.2.3,IEEE8023-LAG-MIB::dot3adAggPortDebugTable,,not-accessible,,current,,A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port.
.1.2.840.10006.300.43.1.2.3.1,IEEE8023-LAG-MIB::dot3adAggPortDebugEntry,,not-accessible,dot3adAggPortIndex,current,,A list of the debug parameters for a port.
.1.2.840.10006.300.43.1.2.3.1.1,IEEE8023-LAG-MIB::dot3adAggPortDebugRxState,INTEGER,read-only,,current,currentRx(1):expired(2):defaulted(3):initialize(4):lacpDisabled(5):portDisabled(6),This attribute holds the value 'currentRx' if the Receive state machine for the Aggregation Port is in the  CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or 'portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.2,IEEE8023-LAG-MIB::dot3adAggPortDebugLastRxTime,TimeTicks,read-only,,current,,The time at which the last LACPDU was received by this Aggregation Port, in terms of centiseconds since the system was last reset. The ifLastChange object in the Interfaces MIB defined in IETF RFC 2863 is a suitable object for supplying a value for aAggPortDebugLastRxTime. This value is read-only. NOTE - aAggPortDebugLastRxTime was defined in terms of the aTimeSinceSystemReset variable of IEEE Std 802.3-2008, Annex F, F.2.1, in earlier versions of this standard. aTimeSinceSystemReset and ifLastChange have the same meaning.
.1.2.840.10006.300.43.1.2.3.1.3,IEEE8023-LAG-MIB::dot3adAggPortDebugMuxState,INTEGER,read-only,,current,detached(1):waiting(2):attached(3):collecting(4):distributing(5):collectingDistributing(6),This attribute holds the value 'detached' if the Mux state machine (5.4.14) for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, 'collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, 'distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and 'collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.4,IEEE8023-LAG-MIB::dot3adAggPortDebugMuxReason,OCTET,read-only,,current,,A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.5,IEEE8023-LAG-MIB::dot3adAggPortDebugActorChurnState,INTEGER,read-only,,current,noChurn(1):churn(2):churnMonitor(3),The state of the Actor Churn Detection machine (6.4.17) for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.6,IEEE8023-LAG-MIB::dot3adAggPortDebugPartnerChurnState,INTEGER,read-only,,current,noChurn(1):churn(2):churnMonitor(3),The state of the Partner Churn Detection machine (6.4.17) for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.7,IEEE8023-LAG-MIB::dot3adAggPortDebugActorChurnCount,Counter32,read-only,,current,,Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.8,IEEE8023-LAG-MIB::dot3adAggPortDebugPartnerChurnCount,Counter32,read-only,,current,,Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.9,IEEE8023-LAG-MIB::dot3adAggPortDebugActorSyncTransitionCount,Counter32,read-only,,current,,Count of the number of times the Actor's Mux state machine (6.4.15) has entered the IN_SYNC state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.10,IEEE8023-LAG-MIB::dot3adAggPortDebugPartnerSyncTransitionCount,Counter32,read-only,,current,,Count of the number of times the Partner's Mux state machine (6.4.15) has entered the IN_SYNC state. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.11,IEEE8023-LAG-MIB::dot3adAggPortDebugActorChangeCount,Counter32,read-only,,current,,Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only.
.1.2.840.10006.300.43.1.2.3.1.12,IEEE8023-LAG-MIB::dot3adAggPortDebugPartnerChangeCount,Counter32,read-only,,current,,Count of the number of times the Partner's perception of the LAG ID (see 6.3.6.1) for this Aggregation Port has changed. This value is read-only.
.1.2.840.10006.300.43.1.2.4,IEEE8023-LAG-MIB::dot3adAggPortXTable,,not-accessible,,current,,A table that extends dot3adAggPortTable.
.1.2.840.10006.300.43.1.2.4.1,IEEE8023-LAG-MIB::dot3adAggPortXEntry,,not-accessible,,current,,A list of extension parameters for Aggregation Port.
.1.2.840.10006.300.43.1.2.4.1.1,IEEE8023-LAG-MIB::dot3adAggPortProtocolDA,OCTET,read-write,,current,,A 6-octet read-write MACAddress value specifying the DA to be used when sending Link Aggregation Control and Marker PDUs on this Aggregation Port, corresponding to the value of Protocol_DA in 6.2.8.1.2, 6.2.10.1.3 and 6.5.4.2.1. The default value shall be the IEEE 802.3 Slow_Protocols_Multicast address.
.1.2.840.10006.300.43.1.2.5,IEEE8023-LAG-MIB::dot3adAggPortSecondXTable,,not-accessible,,current,,A table that extends dot3adAggPortTable.
.1.2.840.10006.300.43.1.2.5.1,IEEE8023-LAG-MIB::dot3adAggPortSecondXEntry,,not-accessible,,current,,A list of extension parameters for Aggregation Port.
.1.2.840.10006.300.43.1.2.5.1.1,IEEE8023-LAG-MIB::dot3adAggPortOperConversationPasses,OCTET,read-only,,current,,A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is distributed through this Aggregation Port, and a 0 indicates that it cannot. aAggPortOperConversationPasses is referencing the current value of Port_Oper_Conversation_Mask (6.6.2.2).
.1.2.840.10006.300.43.1.2.5.1.2,IEEE8023-LAG-MIB::dot3adAggPortOperConversationCollected,OCTET,read-only,,current,,A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is collected through this Aggregation Port, and a 0 indicates that it cannot. aAggPortOperConversationPasses is referencing the current value of Collection_Conversation_Mask (6.6.1.1.2).
.1.2.840.10006.300.43.1.2.5.1.3,IEEE8023-LAG-MIB::dot3adAggPortLinkNumberId,Integer32,read-write,,current,,The Link Number ID value configured for this Aggregation Port by the System's administrator. When the Link Number ID value matches one of the non zero values in the selection prioritized lists in aAggConversationAdminLink[] (7.3.1.1.35), then this Aggregation Port must be configured to have an aAggPortActorAdminKey value that matches the aAggActorAdminKey of the Aggregator used by the LAG of the links specified in aAggConversationAdminLink[]. Its default value is set to the match of the aAggActorAdminKey to aAggPortActorAdminKey values excludes the first two bits identifying the individual Portal System in the Portal. If the network administrator fails to configure the proper values for the aAggPortActorAdminKey variables in all of the Aggregators Ports attached to a Portal, the DRCP (9.4) and the variable Port_Oper_Conversation_Mask (6.6.2.2) prevent looping and/or duplicate delivery, if necessary, by discarding frames belonging to misconfigured Conversations.
.1.2.840.10006.300.43.1.2.5.1.4,IEEE8023-LAG-MIB::dot3adAggPortPartnerAdminLinkNumberId,Integer32,read-write,,deprecated,,The value for the Link Number ID of the Partner System for this Aggregation Port, assigned by administrator or System policy for use when the Partner's information is unknown. Its default value is set to 0.
.1.2.840.10006.300.43.1.2.5.1.5,IEEE8023-LAG-MIB::dot3adAggPortWTRTime,Integer32,read-write,,current,,The wait-to-restore (WTR) period accompanying selection
.1.2.840.10006.300.43.1.2.5.1.6,IEEE8023-LAG-MIB::dot3adAggPortEnableLongPDUXmit,INTEGER,read-write,,current,true(1):false(2),A read-write Boolean value indicating whether the Aggregation Port
.1.2.840.10006.300.43.1.2.6,IEEE8023-LAG-MIB::dot3adAggPortDebugXTable,,not-accessible,,current,,A table that extends dot3adAggPortDebugTable.
.1.2.840.10006.300.43.1.2.6.1,IEEE8023-LAG-MIB::dot3adAggPortDebugXEntry,,not-accessible,,current,,A list of extension parameters for the LACP Port Debug table.
.1.2.840.10006.300.43.1.2.6.1.1,IEEE8023-LAG-MIB::dot3adAggPortDebugActorCDSChurnState,INTEGER,read-only,,current,noChurn(1):churn(2):churnMonitor(3),This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. The state of the Actor CDS Churn Detection machine (6.6.2.7) for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CDS_CHURN or the ACTOR_CHURN_CDS_MONITOR state, and 'churn' indicates that the state machine is in the ACTOR_CDS_CHURN state. This value is read-only.
.1.2.840.10006.300.43.1.2.6.1.2,IEEE8023-LAG-MIB::dot3adAggPortDebugPartnerCDSChurnState,INTEGER,read-only,,current,noChurn(1):churn(2):churnMonitor(3),This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. The state of the Partner CDS Churn Detection machine (6.6.2.7) for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER_CDS_CHURN or the PARTNER_CDS_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the PARTNER_CDSCHURN state. This value is read-only.
.1.2.840.10006.300.43.1.2.6.1.3,IEEE8023-LAG-MIB::dot3adAggPortDebugActorCDSChurnCount,Counter64,read-only,,current,,This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. Count of the number of times the Actor CDS Churn state machine has entered the ACTOR_CDS_CHURN state. This value is read-only.
.1.2.840.10006.300.43.1.2.6.1.4,IEEE8023-LAG-MIB::dot3adAggPortDebugPartnerCDSChurnCount,Counter64,read-only,,current,,This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. Count of the number of times the Partner CDS Churn state machine has entered the PARTNER_CDS_CHURN state. This value is read-only.
.1.2.840.10006.300.43.1.3,IEEE8023-LAG-MIB::dot3adTablesLastChanged,TimeTicks,read-only,,current,,This object indicates the time of the most recent change to the dot3adAggTable, dot3adAggPortTable, dot3adDrniTable and dot3adIPPAttributeTable.
.1.2.840.10006.300.43.1.4,IEEE8023-LAG-MIB::dot3adDrni,,,,,,
.1.2.840.10006.300.43.1.4.1,IEEE8023-LAG-MIB::dot3adDrniTable,,not-accessible,,current,,A table that contains information about every DRNI that is associated with this System.
.1.2.840.10006.300.43.1.4.1.1,IEEE8023-LAG-MIB::dot3adDrniEntry,,not-accessible,dot3adDrniIndex,current,,A list of the DRNI parameters. This is indexed by the DRNI Portal ID.
.1.2.840.10006.300.43.1.4.1.1.1,IEEE8023-LAG-MIB::dot3adDrniIndex,Integer32,not-accessible,,current,,The unique identifier allocated to this Distributed Relay by the local System. This attribute identifies a Distributed Relay instance among the subordinate managed objects of the containing object. This value is read-only. NOTE - The aDrniID is represented in the SMIv2 MIB as an ifIndex-see D.5.
.1.2.840.10006.300.43.1.4.1.1.2,IEEE8023-LAG-MIB::dot3adDrniDescription,OCTET,read-only,,current,,A human-readable text string containing information about the Distribute Relay. This string is read-only. The contents are vendor specific.
.1.2.840.10006.300.43.1.4.1.1.3,IEEE8023-LAG-MIB::dot3adDrniName,OCTET,read-write,,current,,A human-readable text string containing a locally significant name for the Distributed Relay. This string is read-write.
.1.2.840.10006.300.43.1.4.1.1.4,IEEE8023-LAG-MIB::dot3adDrniPortalAddr,OCTET,read-write,,current,,A read-write identifier of a particular Portal. aDrniPortalAddr has to be unique among at least all of the potential Portal Systems to which a given Portal System might be attached via an IPL Intra-Portal Link. Also used as the Actor's System ID (6.3.2) for the emulated system.
.1.2.840.10006.300.43.1.4.1.1.5,IEEE8023-LAG-MIB::dot3adDrniPortalPriority,Integer32,read-write,,current,,A 2-octet read-write value indicating the priority value associated with the Portal's System ID. Also used as the Actor's System Priority (6.3.2) for the emulated system.
.1.2.840.10006.300.43.1.4.1.1.6,IEEE8023-LAG-MIB::dot3adDrniThreePortalSystem,INTEGER,read-write,,current,true(1):false(2),A read-write Boolean value indicating whether this Portal System is part of a Portal consisting of three Portal Systems or not. Value 1 stands for a Portal of three Portal Systems, value 0 stands for a Portal of two Portal Systems. The default value is 0.
.1.2.840.10006.300.43.1.4.1.1.7,IEEE8023-LAG-MIB::dot3adDrniPortalSystemNumber,Integer32,read-write,,current,,A read-write identifier of this particular Portal System within a Portal. It is the responsibility of the network administrator to ensure that these numbers are unique among the Portal Systems with the same aDrniPortalAddr (7.4.1.1.4).
.1.2.840.10006.300.43.1.4.1.1.8,IEEE8023-LAG-MIB::dot3adDrniIntraPortalLinkList,OCTET,read-write,,current,,Read-write list of the Interface Identifiers of the Ports to the Intra-Portal Links assigned to this Distributed Relay. Each Interface Identifier, a Port ID (6.3.4), has the two least significant bits of its Port Priority (7.3.2.1.15) configured to match the Portal System Number of the attached Portal System. The number of IPLs in the list depends on the Portal topology. For a Portal of three Portal Systems two or three IPLs can be used, for a Portal of two Portal Systems a single IPL is required and for a single Portal System no IPL is required.
.1.2.840.10006.300.43.1.4.1.1.9,IEEE8023-LAG-MIB::dot3adDrniAggregator,Integer32,read-write,,current,,An INTEGER that matches the syntax of an Interface Identifier. Read-write Interface Identifier of the Aggregator Port assigned to this Distributed Relay.
.1.2.840.10006.300.43.1.4.1.1.10,IEEE8023-LAG-MIB::dot3adDrniNeighborAdminConvGatewayListDigest,OCTET,read-write,,current,,The value for the digest of the prioritized Gateway Conversation ID-to-Gateway assignments of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's information is unknown. Its default value is set to NULL.
.1.2.840.10006.300.43.1.4.1.1.11,IEEE8023-LAG-MIB::dot3adDrniNeighborAdminConvPortListDigest,OCTET,read-write,,current,,The value for the digest of the prioritized Port Conversation ID-to-Aggregation Port assignments of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's information is unknown. Its default value is set to NULL.
.1.2.840.10006.300.43.1.4.1.1.12,IEEE8023-LAG-MIB::dot3adDrniGatewayAlgorithm,OCTET,read-write,,current,,This object identifies the algorithm used by the DR Function to assign frames to a Gateway Conversation ID. Table 9-7 provides the IEEE 802.1 OUI (00-80-C2) Gateway Algorithm encodings. A SEQUENCE OF OCTETS consisting of an OUI or CID and one following octet.
.1.2.840.10006.300.43.1.4.1.1.13,IEEE8023-LAG-MIB::dot3adDrniNeighborAdminGatewayAlgorithm,OCTET,read-write,,current,,This object identifies the value for the Gateway algorithm of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's information is unknown. Table 9-7 provides the IEEE 802.1 OUI (00-80-C2) Gateway Algorithm encodings. Its default value is set to NULL. A SEQUENCE OF OCTETS consisting of a 3-octet OUI or CID and one following octet.
.1.2.840.10006.300.43.1.4.1.1.14,IEEE8023-LAG-MIB::dot3adDrniNeighborAdminPortAlgorithm,OCTET,read-write,,current,,This object identifies the value for the Port Algorithm of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's information is unknown. Table 6-4 provides the IEEE 802.1 OUI (00-80-C2) Port Algorithm encodings. Its default value is set to NULL. A SEQUENCE OF OCTETS consisting of a 3-octet OUI or CID and one following octet.
.1.2.840.10006.300.43.1.4.1.1.15,IEEE8023-LAG-MIB::dot3adDrniNeighborAdminDRCPState,BITS,read-write,,current,homeGateway(0):neighborGateway(1):otherGateway(2):ippActivity(3):timeout(4):gatewaySync(5):portSync(6):expired(7),A string of 8 bits, corresponding to the administrative values of DRCP_State [item s) in 9.4.3.2] as transmitted by this Portal System in DRCPDUs. The first bit corresponds to bit 0 of DRCP_State (HomeGateway), the second bit corresponds to bit 1 (NeighborGateway), the third bit corresponds to bit 2 (OtherGateway), the fourth bit corresponds to bit 3 (IppActivity), the fifth bit corresponds to bit 4 (Timeout), the sixth bit corresponds to bit 5 (GatewaySync), the seventh bit corresponds to bit 6 (PortSync), and the eighth bit  corresponds to bit 7 (Expired). These values allow administrative control over the values of HomeGateway, NeighborGateway, OtherGateway, IppActivity, and Timeout. Their values are by default set to FALSE. This attribute value is read-write.
.1.2.840.10006.300.43.1.4.1.1.16,IEEE8023-LAG-MIB::dot3adDrniEncapsulationMethod,OCTET,read-write,,current,,This managed object is applicable only when Network / IPL sharing by time (9.3.2.1) or Network / IPL sharing by tag (9.3.2.2) or Network / IPL sharing by encapsulation (9.3.2.3) is supported. The object identifies the value representing the encapsulation method that is used to transport IPL frames to the Neighbor Portal System when the IPL and network link are sharing the same physical link. It consists of the 3-octet OUI or CID identifying the organization that is responsible for this encapsulation and one following octet used to identify the encapsulation method defined by that organization. Table 9-11 provides the IEEE 802.1 OUI (00-80-C2) encapsulation method encodings. A Default value of 0x00-80-C2-00 indicates that the IPL is using a separate physical or Aggregation link. A value of 1 indicates that Network / IPL sharing by time (9.3.2.1) is used. A value of 2 indicates that the encapsulation method used is the same as the one used by network frames and that Network / IPL sharing by tag (9.3.2.2) is used.
.1.2.840.10006.300.43.1.4.1.1.17,IEEE8023-LAG-MIB::dot3adDrniDRPortConversationPasses,OCTET,read-only,,current,,A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is allowed to be distributed through this DR Function's Aggregator, and a 0 indicates that it cannot. aDrniDRPortConversationPasses is referencing the current value of Drni_Portal_System_Port_Conversation (9.3.4.2).
.1.2.840.10006.300.43.1.4.1.1.18,IEEE8023-LAG-MIB::dot3adDrniDRGatewayConversationPasses,OCTET,read-only,,current,,A read-only current operational vector of Boolean values, with one value for each possible Gateway Conversation ID. A 1 indicates that the Gateway Conversation ID is allowed to pass through this DR Function's Gateway, and a 0 indicates that it cannot. aDrniDRGatewayConversationPasses is referencing the current value of Drni_Portal_System_Gateway_Conversation (9.3.4.2).
.1.2.840.10006.300.43.1.4.1.1.19,IEEE8023-LAG-MIB::dot3adDrniPSI,INTEGER,read-only,,current,true(1):false(2),A read-only Boolean value providing the value of PSI, which ('FALSE').
.1.2.840.10006.300.43.1.4.1.1.20,IEEE8023-LAG-MIB::dot3adDrniPortConversationControl,INTEGER,read-write,,current,true(1):false(2),A read-write Boolean value that controls the operation of the algorithm and the Port algorithm use the same distributions methods. The default is 'FALSE', indicating that the Home Gateway Vector is controlled by the network control protocol.
.1.2.840.10006.300.43.1.4.1.1.21,IEEE8023-LAG-MIB::dot3adDrniIntraPortalPortProtocolDA,OCTET,read-write,,current,,A 6-octet read-write MAC Address value specifying the destination address to be used when sending DRCPDUs, corresponding to the value of DRCP_Protocol_DA in 9.4.4.1.3. Its values is one of the addresses selected from Table 9-4 and its default shall be the IEEE 802.1 Nearest non-TPMR Bridge group address (01-80-C2-00-00-03).
.1.2.840.10006.300.43.1.4.2,IEEE8023-LAG-MIB::dot3adDrniConvAdminGatewayTable,,not-accessible,,current,,There are 4096 aDrniConvAdminGateway[] variables, aDrniConvAdminGateway[0] through aDrniConvAdminGateway[4095], indexed by Gateway Conversation ID. Each contains administrative values of the Gateway selection priority list for the Distributed Relay for the referenced Gateway Conversation ID. This selection priority list, a sequence of integers for each Gateway Conversation ID, is a list of Portal System Numbers in the order of preference, highest to lowest, for the corresponding preferred Portal System's Gateway to carry that Conversation. NOTE - To the extent that the network administrator fails to configure the same values for the aDrniConvAdminGateway[] variables in all of the DR Functions of a Portal, frames can be misdirected. The DRCP (9.4) detects such misconfiguration.
.1.2.840.10006.300.43.1.4.2.1,IEEE8023-LAG-MIB::dot3adDrniConvAdminGatewayEntry,,not-accessible,dot3adDrniGatewayConversationID:dot3adDrniIndex,current,,A Gateway selection priority list for the Distributed Relay for the referenced Gateway Conversation ID. This selection priority list, a sequence of integers for each Gateway Conversation ID, is a list of Portal System Numbers in the order of preference, highest to lowest, for the corresponding preferred Portal System's Gateway to carry that Conversation.
.1.2.840.10006.300.43.1.4.2.1.1,IEEE8023-LAG-MIB::dot3adDrniGatewayConversationID,Integer32,not-accessible,,current,,An identifer for a Gateway Conversation.
.1.2.840.10006.300.43.1.4.2.1.2,IEEE8023-LAG-MIB::dot3adDrniConvAdminGatewayList,OCTET,read-write,,current,,Priority list of Portal System Numbers in order of preference from highest to lowest.
.1.2.840.10006.300.43.1.4.3,IEEE8023-LAG-MIB::dot3adDrniIPLEncapMapTable,,not-accessible,,current,,This managed object is applicable only when Network / IPL sharing by tag (9.3.2.2) or Network / IPL sharing by encapsulation (9.3.2.3) is supported. Each entry represents the value of the identifier used for an IPL frame associated with that Gateway Conversation ID for the encapsulation method specified in 7.4.1.1.17.
.1.2.840.10006.300.43.1.4.3.1,IEEE8023-LAG-MIB::dot3adDrniIPLEncapMapEntry,,not-accessible,dot3adDrniGatewayConversationID:dot3adDrniIndex,current,,An entry represents the value of the identifier used for an IPL frame associated with that Gateway Conversation ID for the encapsulation method specified in 7.4.1.1.17.
.1.2.840.10006.300.43.1.4.3.1.2,IEEE8023-LAG-MIB::dot3adDrniIPLFrameIdValue,Integer32,read-write,,current,,The value of the identifier used for an IPL frame associated with that Gateway Conversation ID for the encapsulation method.
.1.2.840.10006.300.43.1.4.4,IEEE8023-LAG-MIB::dot3adDrniNetEncapMapTable,,not-accessible,,current,,This managed object is applicable only when Network / IPL sharing by tag (9.3.2.2) is supported. Each entry represents the translated value of the identifier used for a network frame associated with that Gateway Conversation ID when the method specified in 7.4.1.1.17 is the Network / IPL sharing by tag method specified in 9.3.2.2 and the network frames need to share the tag space used by IPL frames.
.1.2.840.10006.300.43.1.4.4.1,IEEE8023-LAG-MIB::dot3adDrniNetEncapMapEntry,,not-accessible,dot3adDrniGatewayConversationID:dot3adDrniIndex,current,,An entry represents the translated value of the identifier used for a network frame associated with that Gateway Conversation ID when the method specified in 7.4.1.1.12 is the Network / IPL sharing by tag method specified in 9.3.2.2 and the network frames need to share the tag space used by IPL frames.
.1.2.840.10006.300.43.1.4.4.1.1,IEEE8023-LAG-MIB::dot3adDrniNetFrameIdValue,Integer32,read-write,,current,,The translated value of the identifier used for a network frame associated that Gateway Conversation ID.
.1.2.840.10006.300.43.1.5,IEEE8023-LAG-MIB::dot3adIPP,,,,,,
.1.2.840.10006.300.43.1.5.1,IEEE8023-LAG-MIB::dot3adIPPAttributeTable,,not-accessible,,current,,A table that contains information about every IPP that is associated with this System.
.1.2.840.10006.300.43.1.5.1.1,IEEE8023-LAG-MIB::dot3adIPPAttributeEntry,,not-accessible,dot3adIPPIndex,current,,An entry containing Attributes for an IPP.
.1.2.840.10006.300.43.1.5.1.1.1,IEEE8023-LAG-MIB::dot3adIPPIndex,Integer32,not-accessible,,current,,The unique identifier allocated to this IPP by the local Portal System. This attribute identifies an IPP instance among the subordinate managed objects of the containing object. This value is read-only. NOTE-The aIPPID is represented in the SMIv2 MIB as an ifIndex-see D.5.
.1.2.840.10006.300.43.1.5.1.1.2,IEEE8023-LAG-MIB::dot3adIPPPortConversationPasses,OCTET,read-only,,current,,A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is allowed to be transmitted through this IPP Intra-Portal Port, and a 0 indicates that it cannot. aDrniIPPPortConversationPasses is referencing the current value of Ipp_Port_Conversation_Passes (9.3.4.3).
.1.2.840.10006.300.43.1.5.1.1.3,IEEE8023-LAG-MIB::Ipp_Gateway_Conversation_Direction,OCTET,read-only,,current,,A read-only current operational vector of Boolean values, with one value for each possible Gateway Conversation ID. A 1 indicates that the Gateway Conversation ID is assigned to Gateways reachable through this IPP Intra-Portal Port, and a 0 indicates that the Gateway for the indexed Gateway Conversation ID is not reachable through this IPP Intra-Portal Port. aIPPGatewayConversationDirection is referencing the current value of
.1.2.840.10006.300.43.1.5.1.1.4,IEEE8023-LAG-MIB::dot3adIPPAdminState,INTEGER,read-write,,current,up(1):down(2),This read-write value defines the administrative state of the IPP. A value of 'up' indicates that the operational state of the IPP (aIPPOperState) is permitted to be either up or down. A value of 'down' forces the operational state of the IPP to be down. A GET operation returns the current administrative state. A SET operation changes the administrative state to a new value.
.1.2.840.10006.300.43.1.5.1.1.5,IEEE8023-LAG-MIB::dot3adIPPOperState,INTEGER,read-only,,current,up(1):down(2),This read-only value defines the operational state of the IPP. The operational state is 'up' if the IPL is operational, and if the value of aIPPAdminState for the IPP is also 'up'. If the IPL is not operational, or if the administrative state of the IPP (aIPPAdminState) is 'down', then the operational state is 'down.' An operational state of 'up' indicates that the IPP is available for use by the DR Function; a value of 'down' indicates that the IPP is not available for use by the DR Function.
.1.2.840.10006.300.43.1.5.1.1.6,IEEE8023-LAG-MIB::dot3adIPPTimeOfLastOperChange,Integer32,read-only,,current,,The time at which the interface entered its current operational state, in terms of centiseconds since the system was last reset. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a value of zero. The ifLastChange object in the Interfaces MIB defined in IETF RFC 2863 is a suitable object for supplying a value for aIPPTimeOfLastOperChange. This value is read-only.
.1.2.840.10006.300.43.1.5.2,IEEE8023-LAG-MIB::dot3adIPPStatsTable,,not-accessible,,current,,A table that contains information for IPP statistics. A row appears in this table for each IPP in the system.
.1.2.840.10006.300.43.1.5.2.1,IEEE8023-LAG-MIB::dot3adIPPStatsEntry,,not-accessible,dot3adIPPIndex,current,,An entry containing Statistics for an IPP.
.1.2.840.10006.300.43.1.5.2.1.1,IEEE8023-LAG-MIB::dot3adIPPStatsDRCPDUsRx,Counter64,read-only,,current,,The number of valid DRCPDUs received on this IPP. This value is read-only.
.1.2.840.10006.300.43.1.5.2.1.2,IEEE8023-LAG-MIB::dot3adIPPStatsIllegalRx,Counter64,read-only,,current,,The number of frames received that carry the DRCP Ethernet Type value (9.4.2.4), but contain a badly formed PDU. This value is read-only.
.1.2.840.10006.300.43.1.5.2.1.3,IEEE8023-LAG-MIB::dot3adIPPStatsDRCPDUsTx,Counter64,read-only,,current,,The number of DRCPDUs transmitted on this IPP. This value is read-only.
.1.2.840.10006.300.43.1.5.3,IEEE8023-LAG-MIB::dot3adIPPDebugTable,,not-accessible,,current,,A table that contains IPP debug information. A row appears in this table for each IPP in the system.
.1.2.840.10006.300.43.1.5.3.1,IEEE8023-LAG-MIB::dot3adIPPDebugEntry,,not-accessible,dot3adIPPIndex,current,,An entry containing Debug Information for an IPP.
.1.2.840.10006.300.43.1.5.3.1.1,IEEE8023-LAG-MIB::dot3adIPPDebugDRCPRxState,INTEGER,read-only,,current,expired(2):defaulted(3):initialize(4):reportToManagement(5),This attribute holds the value 'current' if the DRCPDU Receive state machine for the IPP is in the CURRENT state, 'expired' if the DRCPDU Receive state machine is in the EXPIRED state, 'defaulted' if the DRCPDU Receive state machine is in the DEFAULTED state, 'initialize' if the DRCPDU Receive state machine is in the INITIALIZE state, or 'reportToManagement' if the Receive state machine is in the REPORT_TO_MANAGEMENT state. This value is read-only.
.1.2.840.10006.300.43.1.5.3.1.2,IEEE8023-LAG-MIB::dot3adIPPDebugLastRxTime,TimeTicks,read-only,,current,,The time at which the last DRCPDU was received by this IPP, in terms of centiseconds since the system was last reset. The ifLastChange object in the Interfaces MIB defined in IETF RFC 2863 is a suitable object for supplying a value for aDrniIPPDebugLastRxTime. This value is read-only.
.1.2.840.10006.300.43.1.5.3.1.3,IEEE8023-LAG-MIB::dot3adIPPDebugDifferPortalReason,OCTET,read-only,,current,,A human-readable text string indicating the most recent set of variables that are responsible for setting the variable Differ_Portal or Differ_Conf_Portal (9.4.8) on this IPP to TRUE. This value is read-only.
.1.2.840.10006.300.43.2,IEEE8023-LAG-MIB::dot3adAggConformance,,,,,,
.1.2.840.10006.300.43.2.1,IEEE8023-LAG-MIB::dot3adAggGroups,,,,,,
.1.2.840.10006.300.43.2.1.1,IEEE8023-LAG-MIB::dot3adAggGroup,,,,,,A collection of objects providing information about an aggregation.
.1.2.840.10006.300.43.2.1.2,IEEE8023-LAG-MIB::dot3adAggPortListGroup,,,,,,A collection of objects providing information about every port in an aggregation.
.1.2.840.10006.300.43.2.1.3,IEEE8023-LAG-MIB::dot3adAggPortGroup,,,,,,A collection of objects providing information about every port in an aggregation.
.1.2.840.10006.300.43.2.1.4,IEEE8023-LAG-MIB::dot3adAggPortStatsGroup,,,,,,A collection of objects providing information about every port in an aggregation.
.1.2.840.10006.300.43.2.1.5,IEEE8023-LAG-MIB::dot3adAggPortDebugGroup,,,,,,A collection of objects providing debug information about  every aggregated port.
.1.2.840.10006.300.43.2.1.6,IEEE8023-LAG-MIB::dot3adTablesLastChangedGroup,,,,,,A collection of objects providing information about the time of changes to the configuration of aggregations and their ports.
.1.2.840.10006.300.43.2.1.7,IEEE8023-LAG-MIB::dot3adAggPortProtocolDAGroup,,,,,,A collection of objects providing information about the protocol destination address in use for ports in an aggregation.
.1.2.840.10006.300.43.2.1.8,IEEE8023-LAG-MIB::dot3adAggNotificationGroup,,,,,,A collection of notifications providing information about  the aggregation.
.1.2.840.10006.300.43.2.1.9,IEEE8023-LAG-MIB::dot3adAggXGroup,,,,,,A collection of extension entries providing information on an aggregation.
.1.2.840.10006.300.43.2.1.10,IEEE8023-LAG-MIB::dot3adAggRecommendedGroup,,,,,,A collection of recommended objects providing information about an aggregation.
.1.2.840.10006.300.43.2.1.11,IEEE8023-LAG-MIB::dot3adAggOptionalGroup,,,,,,A collection of optional objects providing information about an aggregation.
.1.2.840.10006.300.43.2.1.12,IEEE8023-LAG-MIB::dot3adPerServiceFrameDistGroup,,,,,,A collection of objects providing information about Per-Service Frame Distribution.
.1.2.840.10006.300.43.2.1.13,IEEE8023-LAG-MIB::dot3adAggPortDebugXGroup,,,,,,A collection of objects extending aggregator port debug.
.1.2.840.10006.300.43.2.1.14,IEEE8023-LAG-MIB::dot3adDrniGroup,,,,,,A collection of objects providing information about DRNI.
.1.2.840.10006.300.43.2.1.15,IEEE8023-LAG-MIB::dot3adIPPGroup,,,,,,A collection of objects providing IPP information.
.1.2.840.10006.300.43.2.1.16,IEEE8023-LAG-MIB::dot3adIPPStatsGroup,,,,,,A collection of objects providing IPP statistics information.
.1.2.840.10006.300.43.2.1.17,IEEE8023-LAG-MIB::dot3adIPPDebugGroup,,,,,,A collection of objects providing IPP debug information.
.1.2.840.10006.300.43.2.1.18,IEEE8023-LAG-MIB::dot3adPerServiceFrameDistGroup2,,,,,,A collection of objects providing information about Per-Service Frame Distribution.
.1.2.840.10006.300.43.2.2,IEEE8023-LAG-MIB::dot3adAggCompliances,,,,,,
.1.2.840.10006.300.43.2.2.1,IEEE8023-LAG-MIB::dot3adAggCompliance,,,,,,The compliance statement for device support of Link Aggregation.
.1.2.840.10006.300.43.2.2.2,IEEE8023-LAG-MIB::dot3adAggCompliance2,,,,,,The compliance statement for device support of Link Aggregation.
.1.3,RFC1155-SMI::org,,,,,,
.1.3.6,RFC1155-SMI::dod,,,,,,
.1.3.6.1,RFC1155-SMI::internet,,,,,,
.1.3.6.1.1,RFC1155-SMI::directory,,,,,,
.1.3.6.1.2,RFC1155-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.1.8,SNMPv2-MIB::sysORLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID.
.1.3.6.1.2.1.1.9,SNMPv2-MIB::sysORTable,,not-accessible,,current,,The (conceptual) table listing the capabilities of the local SNMP application acting as a command responder with respect to various MIB modules. SNMP entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows.
.1.3.6.1.2.1.1.9.1,SNMPv2-MIB::sysOREntry,,not-accessible,sysORIndex,current,,An entry (conceptual row) in the sysORTable.
.1.3.6.1.2.1.1.9.1.1,SNMPv2-MIB::sysORIndex,INTEGER,not-accessible,,current,,The auxiliary variable used for identifying instances of the columnar objects in the sysORTable.
.1.3.6.1.2.1.1.9.1.2,SNMPv2-MIB::sysORID,OBJECT,read-only,,current,,An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMP application acting as a command responder.
.1.3.6.1.2.1.1.9.1.3,SNMPv2-MIB::sysORDescr,OCTET,read-only,,current,,A textual description of the capabilities identified by the corresponding instance of sysORID.
.1.3.6.1.2.1.1.9.1.4,SNMPv2-MIB::sysORUpTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time this conceptual row was last instantiated.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.4.24,IP-FORWARD-MIB::ipForward,,,,,,The MIB module for the management of CIDR multipath IP Routes. Copyright (C) The Internet Society (2006). This version of this MIB module is a part of RFC 4292; see the RFC itself for full legal notices.
.1.3.6.1.2.1.4.24.1,IP-FORWARD-MIB::ipForwardNumber,Gauge32,read-only,,obsolete,,The number of current ipForwardTable entries that are not invalid.
.1.3.6.1.2.1.4.24.2,IP-FORWARD-MIB::ipForwardTable,,not-accessible,,obsolete,,This entity's IP Routing table.
.1.3.6.1.2.1.4.24.2.1,IP-FORWARD-MIB::ipForwardEntry,,not-accessible,ipForwardDest:ipForwardProto:ipForwardPolicy:ipForwardNextHop,obsolete,,A particular route to a particular destination, under a particular policy.
.1.3.6.1.2.1.4.24.2.1.1,IP-FORWARD-MIB::ipForwardDest,IpAddress,read-only,,obsolete,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardMask object is not equal to x.
.1.3.6.1.2.1.4.24.2.1.2,IP-FORWARD-MIB::ipForwardMask,IpAddress,read-create,,obsolete,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipForwardDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipForwardMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardDest object is not equal to ipForwardDest.
.1.3.6.1.2.1.4.24.2.1.3,IP-FORWARD-MIB::ipForwardPolicy,Integer32,read-only,,obsolete,,The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by ipForwardProto specifies otherwise, the policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 Protocols defining 'policy' otherwise must either define a set of values that are valid for this object or must implement an integer-instanced policy table for which this object's value acts as an index.
.1.3.6.1.2.1.4.24.2.1.4,IP-FORWARD-MIB::ipForwardNextHop,IpAddress,read-only,,obsolete,,On remote routes, the address of the next system en route; otherwise, 0.0.0.0.
.1.3.6.1.2.1.4.24.2.1.5,IP-FORWARD-MIB::ipForwardIfIndex,Integer32,read-create,,obsolete,,The ifIndex value that identifies the local interface through which the next hop of this route should be reached.
.1.3.6.1.2.1.4.24.2.1.6,IP-FORWARD-MIB::ipForwardType,INTEGER,read-create,,obsolete,other(1):invalid(2):local(3):remote(4),The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipForwardTable object. That is, it effectively disassociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipForwardType object.
.1.3.6.1.2.1.4.24.2.1.7,IP-FORWARD-MIB::ipForwardProto,INTEGER,read-only,,obsolete,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.24.2.1.8,IP-FORWARD-MIB::ipForwardAge,Integer32,read-only,,obsolete,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.24.2.1.9,IP-FORWARD-MIB::ipForwardInfo,OBJECT,read-create,,obsolete,,A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as determined by the value specified in the route's ipForwardProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
.1.3.6.1.2.1.4.24.2.1.10,IP-FORWARD-MIB::ipForwardNextHopAS,Integer32,read-create,,obsolete,,The Autonomous System Number of the Next Hop. When this is unknown or not relevant to the protocol indicated by ipForwardProto, zero.
.1.3.6.1.2.1.4.24.2.1.11,IP-FORWARD-MIB::ipForwardMetric1,Integer32,read-create,,obsolete,,The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.12,IP-FORWARD-MIB::ipForwardMetric2,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.13,IP-FORWARD-MIB::ipForwardMetric3,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.14,IP-FORWARD-MIB::ipForwardMetric4,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.15,IP-FORWARD-MIB::ipForwardMetric5,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.3,IP-FORWARD-MIB::ipCidrRouteNumber,Gauge32,read-only,,deprecated,,The number of current ipCidrRouteTable entries that are not invalid. This object is deprecated in favor of inetCidrRouteNumber and the inetCidrRouteTable.
.1.3.6.1.2.1.4.24.4,IP-FORWARD-MIB::ipCidrRouteTable,,not-accessible,,deprecated,,This entity's IP Routing table. This table has been deprecated in favor of the IP version neutral inetCidrRouteTable.
.1.3.6.1.2.1.4.24.4.1,IP-FORWARD-MIB::ipCidrRouteEntry,,not-accessible,ipCidrRouteDest:ipCidrRouteMask:ipCidrRouteTos:ipCidrRouteNextHop,deprecated,,A particular route to a particular destination, under a particular policy.
.1.3.6.1.2.1.4.24.4.1.1,IP-FORWARD-MIB::ipCidrRouteDest,IpAddress,read-only,,deprecated,,The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteMask object is not equal to x.
.1.3.6.1.2.1.4.24.4.1.2,IP-FORWARD-MIB::ipCidrRouteMask,IpAddress,read-only,,deprecated,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipCidrRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.
.1.3.6.1.2.1.4.24.4.1.3,IP-FORWARD-MIB::ipCidrRouteTos,Integer32,read-only,,deprecated,,The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
.1.3.6.1.2.1.4.24.4.1.4,IP-FORWARD-MIB::ipCidrRouteNextHop,IpAddress,read-only,,deprecated,,On remote routes, the address of the next system en route; Otherwise, 0.0.0.0.
.1.3.6.1.2.1.4.24.4.1.5,IP-FORWARD-MIB::ipCidrRouteIfIndex,Integer32,read-create,,deprecated,,The ifIndex value that identifies the local interface through which the next hop of this route should be reached.
.1.3.6.1.2.1.4.24.4.1.6,IP-FORWARD-MIB::ipCidrRouteType,INTEGER,read-create,,deprecated,other(1):reject(2):local(3):remote(4),The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do not result in traffic forwarding or rejection should not be displayed, even if the implementation keeps them stored internally. reject (2) refers to a route that, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
.1.3.6.1.2.1.4.24.4.1.7,IP-FORWARD-MIB::ipCidrRouteProto,INTEGER,read-only,,deprecated,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.24.4.1.8,IP-FORWARD-MIB::ipCidrRouteAge,Integer32,read-only,,deprecated,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied, except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.24.4.1.9,IP-FORWARD-MIB::ipCidrRouteInfo,OBJECT,read-create,,deprecated,,A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
.1.3.6.1.2.1.4.24.4.1.10,IP-FORWARD-MIB::ipCidrRouteNextHopAS,Integer32,read-create,,deprecated,,The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant, its value should be set to zero.
.1.3.6.1.2.1.4.24.4.1.11,IP-FORWARD-MIB::ipCidrRouteMetric1,Integer32,read-create,,deprecated,,The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.12,IP-FORWARD-MIB::ipCidrRouteMetric2,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.13,IP-FORWARD-MIB::ipCidrRouteMetric3,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.14,IP-FORWARD-MIB::ipCidrRouteMetric4,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.15,IP-FORWARD-MIB::ipCidrRouteMetric5,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.16,IP-FORWARD-MIB::ipCidrRouteStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.2.1.4.24.5,IP-FORWARD-MIB::ipForwardConformance,,,,,,
.1.3.6.1.2.1.4.24.5.1,IP-FORWARD-MIB::ipForwardGroups,,,,,,
.1.3.6.1.2.1.4.24.5.1.2,IP-FORWARD-MIB::ipForwardMultiPathGroup,,,,,,IP Multipath Route Table.
.1.3.6.1.2.1.4.24.5.1.3,IP-FORWARD-MIB::ipForwardCidrRouteGroup,,,,,,The CIDR Route Table. This group has been deprecated and replaced with inetForwardCidrRouteGroup.
.1.3.6.1.2.1.4.24.5.1.4,IP-FORWARD-MIB::inetForwardCidrRouteGroup,,,,,,The IP version-independent CIDR Route Table.
.1.3.6.1.2.1.4.24.5.2,IP-FORWARD-MIB::ipForwardCompliances,,,,,,
.1.3.6.1.2.1.4.24.5.2.1,IP-FORWARD-MIB::ipForwardCompliance,,,,,,The compliance statement for SNMPv2 entities that implement the ipForward MIB. This compliance statement has been deprecated and replaced with ipForwardFullCompliance and ipForwardReadOnlyCompliance.
.1.3.6.1.2.1.4.24.5.2.2,IP-FORWARD-MIB::ipForwardOldCompliance,,,,,,The compliance statement for SNMP entities that implement the ipForward MIB.
.1.3.6.1.2.1.4.24.5.2.3,IP-FORWARD-MIB::ipForwardFullCompliance,,,,,,When this MIB is implemented for read-create, the implementation can claim full compliance. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT inetCidrRouteDestType -- SYNTAX InetAddressType (ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT inetCidrRouteDest -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. -- -- OBJECT inetCidrRouteNextHopType -- SYNTAX InetAddressType (unknown(0), ipv4(1), -- ipv6(2), ipv4z(3) -- ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT inetCidrRouteNextHop -- SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. 
.1.3.6.1.2.1.4.24.5.2.4,IP-FORWARD-MIB::ipForwardReadOnlyCompliance,,,,,,When this MIB is implemented without support for read- create (i.e., in read-only mode), the implementation can claim read-only compliance.
.1.3.6.1.2.1.4.24.6,IP-FORWARD-MIB::inetCidrRouteNumber,Gauge32,read-only,,current,,The number of current inetCidrRouteTable entries that are not invalid.
.1.3.6.1.2.1.4.24.7,IP-FORWARD-MIB::inetCidrRouteTable,,not-accessible,,current,,This entity's IP Routing table.
.1.3.6.1.2.1.4.24.7.1,IP-FORWARD-MIB::inetCidrRouteEntry,,not-accessible,inetCidrRouteDestType:inetCidrRouteDest:inetCidrRoutePfxLen:inetCidrRoutePolicy:inetCidrRouteNextHopType:inetCidrRouteNextHop,current,,A particular route to a particular destination, under a particular policy (as reflected in the inetCidrRoutePolicy object). Dynamically created rows will survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in inetCidrRouteDest, inetCidrRoutePolicy, and inetCidrRouteNextHop exceeds 111, then OIDs of column instances in this table will have more than 128 sub- identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.24.7.1.1,IP-FORWARD-MIB::inetCidrRouteDestType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the inetCidrRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object.
.1.3.6.1.2.1.4.24.7.1.2,IP-FORWARD-MIB::inetCidrRouteDest,OCTET,not-accessible,,current,,The destination IP address of this route. The type of this address is determined by the value of the inetCidrRouteDestType object. The values for the index objects inetCidrRouteDest and inetCidrRoutePfxLen must be consistent. When the value of inetCidrRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object inetCidrRoutePfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.
.1.3.6.1.2.1.4.24.7.1.3,IP-FORWARD-MIB::inetCidrRoutePfxLen,Unsigned32,not-accessible,,current,,Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the inetCidrRouteDest field. The values for the index objects inetCidrRouteDest and inetCidrRoutePfxLen must be consistent. When the value of inetCidrRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object inetCidrRoutePfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.
.1.3.6.1.2.1.4.24.7.1.4,IP-FORWARD-MIB::inetCidrRoutePolicy,OBJECT,not-accessible,,current,,This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 0 } shall be used as the default value for this object.
.1.3.6.1.2.1.4.24.7.1.5,IP-FORWARD-MIB::inetCidrRouteNextHopType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the inetCidrRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an actual routing table are allowed as values of this object.
.1.3.6.1.2.1.4.24.7.1.6,IP-FORWARD-MIB::inetCidrRouteNextHop,OCTET,not-accessible,,current,,On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of the inetCidrRouteNextHopType object.
.1.3.6.1.2.1.4.24.7.1.7,IP-FORWARD-MIB::inetCidrRouteIfIndex,Integer32,read-create,,current,,The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.
.1.3.6.1.2.1.4.24.7.1.8,IP-FORWARD-MIB::inetCidrRouteType,INTEGER,read-create,,current,other(1):reject(2):local(3):remote(4):blackhole(5),The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do not result in traffic forwarding or rejection should not be displayed, even if the implementation keeps them stored internally. reject(2) refers to a route that, if matched, discards the message as unreachable and returns a notification (e.g., ICMP error) to the message sender. This is used in some protocols as a means of correctly aggregating routes. blackhole(5) refers to a route that, if matched, discards the message silently.
.1.3.6.1.2.1.4.24.7.1.9,IP-FORWARD-MIB::inetCidrRouteProto,INTEGER,read-only,,current,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16):dvmrp(17):rpl(18):dhcp(19):ttdp(20),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.24.7.1.10,IP-FORWARD-MIB::inetCidrRouteAge,Gauge32,read-only,,current,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.24.7.1.11,IP-FORWARD-MIB::inetCidrRouteNextHopAS,Unsigned32,read-create,,current,,The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's inetCidrRouteProto value. When this object is unknown or not relevant, its value should be set to zero.
.1.3.6.1.2.1.4.24.7.1.12,IP-FORWARD-MIB::inetCidrRouteMetric1,Integer32,read-create,,current,,The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.13,IP-FORWARD-MIB::inetCidrRouteMetric2,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.14,IP-FORWARD-MIB::inetCidrRouteMetric3,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.15,IP-FORWARD-MIB::inetCidrRouteMetric4,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.16,IP-FORWARD-MIB::inetCidrRouteMetric5,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.17,IP-FORWARD-MIB::inetCidrRouteStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).
.1.3.6.1.2.1.4.24.8,IP-FORWARD-MIB::inetCidrRouteDiscards,Counter32,read-only,,current,,The number of valid route entries discarded from the inetCidrRouteTable. Discarded route entries do not appear in the inetCidrRouteTable. One possible reason for discarding an entry would be to free-up buffer space for other route table entries.
.1.3.6.1.2.1.4.25,IP-MIB::ipv6IpForwarding,INTEGER,read-write,,current,forwarding(1):notForwarding(2),The indication of whether this entity is acting as an IPv6 router on any interface in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.26,IP-MIB::ipv6IpDefaultHopLimit,Integer32,read-write,,current,,The default value inserted into the Hop Limit field of the IPv6 header of datagrams originated at this entity whenever a Hop Limit value is not supplied by the transport layer protocol. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.27,IP-MIB::ipv4InterfaceTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which a row in the ipv4InterfaceTable was added or deleted, or when an ipv4InterfaceReasmMaxSize or an ipv4InterfaceEnableStatus object was modified. If new objects are added to the ipv4InterfaceTable that require the ipv4InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause.
.1.3.6.1.2.1.4.28,IP-MIB::ipv4InterfaceTable,,not-accessible,,current,,The table containing per-interface IPv4-specific information.
.1.3.6.1.2.1.4.28.1,IP-MIB::ipv4InterfaceEntry,,not-accessible,ipv4InterfaceIfIndex,current,,An entry containing IPv4-specific information for a specific interface.
.1.3.6.1.2.1.4.28.1.1,IP-MIB::ipv4InterfaceIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.28.1.2,IP-MIB::ipv4InterfaceReasmMaxSize,Integer32,read-only,,current,,The size of the largest IPv4 datagram that this entity can re-assemble from incoming IPv4 fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.28.1.3,IP-MIB::ipv4InterfaceEnableStatus,INTEGER,read-write,,current,up(1):down(2),The indication of whether IPv4 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv4 stack. The IF-MIB should be used to control the state of the interface.
.1.3.6.1.2.1.4.28.1.4,IP-MIB::ipv4InterfaceRetransmitTime,Unsigned32,read-only,,current,,The time between retransmissions of ARP requests to a neighbor when resolving the address or when probing the reachability of a neighbor.
.1.3.6.1.2.1.4.29,IP-MIB::ipv6InterfaceTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which a row in the ipv6InterfaceTable was added or deleted or when an ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier, ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime, ipv6InterfaceRetransmitTime, or ipv6InterfaceForwarding object was modified. If new objects are added to the ipv6InterfaceTable that require the ipv6InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause.
.1.3.6.1.2.1.4.30,IP-MIB::ipv6InterfaceTable,,not-accessible,,current,,The table containing per-interface IPv6-specific information.
.1.3.6.1.2.1.4.30.1,IP-MIB::ipv6InterfaceEntry,,not-accessible,ipv6InterfaceIfIndex,current,,An entry containing IPv6-specific information for a given interface.
.1.3.6.1.2.1.4.30.1.1,IP-MIB::ipv6InterfaceIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.30.1.2,IP-MIB::ipv6InterfaceReasmMaxSize,Unsigned32,read-only,,current,,The size of the largest IPv6 datagram that this entity can re-assemble from incoming IPv6 fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.30.1.3,IP-MIB::ipv6InterfaceIdentifier,OCTET,read-only,,current,,The Interface Identifier for this interface. The Interface Identifier is combined with an address prefix to form an interface address. By default, the Interface Identifier is auto-configured according to the rules of the link type to which this interface is attached. A zero length identifier may be used where appropriate. One possible example is a loopback interface.
.1.3.6.1.2.1.4.30.1.5,IP-MIB::ipv6InterfaceEnableStatus,INTEGER,read-write,,current,up(1):down(2),The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack. The IF-MIB should be used to control the state of the interface. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.30.1.6,IP-MIB::ipv6InterfaceReachableTime,Unsigned32,read-only,,current,,The time a neighbor is considered reachable after receiving a reachability confirmation.
.1.3.6.1.2.1.4.30.1.7,IP-MIB::ipv6InterfaceRetransmitTime,Unsigned32,read-only,,current,,The time between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor.
.1.3.6.1.2.1.4.30.1.8,IP-MIB::ipv6InterfaceForwarding,INTEGER,read-write,,current,forwarding(1):notForwarding(2),The indication of whether this entity is acting as an IPv6 router on this interface with respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). This object is constrained by ipv6IpForwarding and is ignored if ipv6IpForwarding is set to notForwarding. Those systems that do not provide per-interface control of the forwarding function should set this object to forwarding for all interfaces and allow the ipv6IpForwarding object to control the forwarding capability. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.31,IP-MIB::ipTrafficStats,,,,,,
.1.3.6.1.2.1.4.31.1,IP-MIB::ipSystemStatsTable,,not-accessible,,current,,The table containing system wide, IP version specific traffic statistics. This table and the ipIfStatsTable contain similar objects whose difference is in their granularity. Where this table contains system wide traffic statistics, the ipIfStatsTable contains the same statistics but counted on a per-interface basis.
.1.3.6.1.2.1.4.31.1.1,IP-MIB::ipSystemStatsEntry,,not-accessible,ipSystemStatsIPVersion,current,,A statistics entry containing system-wide objects for a particular IP version.
.1.3.6.1.2.1.4.31.1.1.1,IP-MIB::ipSystemStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of this row.
.1.3.6.1.2.1.4.31.1.1.3,IP-MIB::ipSystemStatsInReceives,Counter32,read-only,,current,,The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.4,IP-MIB::ipSystemStatsHCInReceives,Counter64,read-only,,current,,The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipSystemStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.5,IP-MIB::ipSystemStatsInOctets,Counter32,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipSystemStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.6,IP-MIB::ipSystemStatsHCInOctets,Counter64,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipSystemStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.7,IP-MIB::ipSystemStatsInHdrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.8,IP-MIB::ipSystemStatsInNoRoutes,Counter32,read-only,,current,,The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.9,IP-MIB::ipSystemStatsInAddrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.10,IP-MIB::ipSystemStatsInUnknownProtos,Counter32,read-only,,current,,The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.11,IP-MIB::ipSystemStatsInTruncatedPkts,Counter32,read-only,,current,,The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.12,IP-MIB::ipSystemStatsInForwDatagrams,Counter32,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.13,IP-MIB::ipSystemStatsHCInForwDatagrams,Counter64,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipSystemStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.14,IP-MIB::ipSystemStatsReasmReqds,Counter32,read-only,,current,,The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.15,IP-MIB::ipSystemStatsReasmOKs,Counter32,read-only,,current,,The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.16,IP-MIB::ipSystemStatsReasmFails,Counter32,read-only,,current,,The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.17,IP-MIB::ipSystemStatsInDiscards,Counter32,read-only,,current,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.18,IP-MIB::ipSystemStatsInDelivers,Counter32,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.19,IP-MIB::ipSystemStatsHCInDelivers,Counter64,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.20,IP-MIB::ipSystemStatsOutRequests,Counter32,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipSystemStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.21,IP-MIB::ipSystemStatsHCOutRequests,Counter64,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipSystemStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.22,IP-MIB::ipSystemStatsOutNoRoutes,Counter32,read-only,,current,,The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.23,IP-MIB::ipSystemStatsOutForwDatagrams,Counter32,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.24,IP-MIB::ipSystemStatsHCOutForwDatagrams,Counter64,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipSystemStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.25,IP-MIB::ipSystemStatsOutDiscards,Counter32,read-only,,current,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipSystemStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.26,IP-MIB::ipSystemStatsOutFragReqds,Counter32,read-only,,current,,The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.27,IP-MIB::ipSystemStatsOutFragOKs,Counter32,read-only,,current,,The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.28,IP-MIB::ipSystemStatsOutFragFails,Counter32,read-only,,current,,The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.29,IP-MIB::ipSystemStatsOutFragCreates,Counter32,read-only,,current,,The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.30,IP-MIB::ipSystemStatsOutTransmits,Counter32,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.31,IP-MIB::ipSystemStatsHCOutTransmits,Counter64,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipSystemStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.32,IP-MIB::ipSystemStatsOutOctets,Counter32,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipSystemStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.33,IP-MIB::ipSystemStatsHCOutOctets,Counter64,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipSystemStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.34,IP-MIB::ipSystemStatsInMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.35,IP-MIB::ipSystemStatsHCInMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams received. This object counts the same datagrams as ipSystemStatsInMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.36,IP-MIB::ipSystemStatsInMcastOctets,Counter32,read-only,,current,,The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.37,IP-MIB::ipSystemStatsHCInMcastOctets,Counter64,read-only,,current,,The total number of octets received in IP multicast datagrams. This object counts the same octets as ipSystemStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.38,IP-MIB::ipSystemStatsOutMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.39,IP-MIB::ipSystemStatsHCOutMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.40,IP-MIB::ipSystemStatsOutMcastOctets,Counter32,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.41,IP-MIB::ipSystemStatsHCOutMcastOctets,Counter64,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipSystemStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.42,IP-MIB::ipSystemStatsInBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.43,IP-MIB::ipSystemStatsHCInBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams received. This object counts the same datagrams as ipSystemStatsInBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.44,IP-MIB::ipSystemStatsOutBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.45,IP-MIB::ipSystemStatsHCOutBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.46,IP-MIB::ipSystemStatsDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.31.1.1.47,IP-MIB::ipSystemStatsRefreshRate,Unsigned32,read-only,,current,,The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
.1.3.6.1.2.1.4.31.2,IP-MIB::ipIfStatsTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which a row in the ipIfStatsTable was added or deleted. If new objects are added to the ipIfStatsTable that require the ipIfStatsTableLastChange to be updated when they are modified, they must specify that requirement in their description clause.
.1.3.6.1.2.1.4.31.3,IP-MIB::ipIfStatsTable,,not-accessible,,current,,The table containing per-interface traffic statistics. This table and the ipSystemStatsTable contain similar objects whose difference is in their granularity. Where this table contains per-interface statistics, the ipSystemStatsTable contains the same statistics, but counted on a system wide basis.
.1.3.6.1.2.1.4.31.3.1,IP-MIB::ipIfStatsEntry,,not-accessible,ipIfStatsIPVersion:ipIfStatsIfIndex,current,,An interface statistics entry containing objects for a particular interface and version of IP.
.1.3.6.1.2.1.4.31.3.1.1,IP-MIB::ipIfStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of this row.
.1.3.6.1.2.1.4.31.3.1.2,IP-MIB::ipIfStatsIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.31.3.1.3,IP-MIB::ipIfStatsInReceives,Counter32,read-only,,current,,The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.4,IP-MIB::ipIfStatsHCInReceives,Counter64,read-only,,current,,The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipIfStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.5,IP-MIB::ipIfStatsInOctets,Counter32,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipIfStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.6,IP-MIB::ipIfStatsHCInOctets,Counter64,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipIfStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.7,IP-MIB::ipIfStatsInHdrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.8,IP-MIB::ipIfStatsInNoRoutes,Counter32,read-only,,current,,The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.9,IP-MIB::ipIfStatsInAddrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.10,IP-MIB::ipIfStatsInUnknownProtos,Counter32,read-only,,current,,The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.11,IP-MIB::ipIfStatsInTruncatedPkts,Counter32,read-only,,current,,The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.12,IP-MIB::ipIfStatsInForwDatagrams,Counter32,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.13,IP-MIB::ipIfStatsHCInForwDatagrams,Counter64,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipIfStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.14,IP-MIB::ipIfStatsReasmReqds,Counter32,read-only,,current,,The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.15,IP-MIB::ipIfStatsReasmOKs,Counter32,read-only,,current,,The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.16,IP-MIB::ipIfStatsReasmFails,Counter32,read-only,,current,,The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.17,IP-MIB::ipIfStatsInDiscards,Counter32,read-only,,current,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.18,IP-MIB::ipIfStatsInDelivers,Counter32,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.19,IP-MIB::ipIfStatsHCInDelivers,Counter64,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipIfStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.20,IP-MIB::ipIfStatsOutRequests,Counter32,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipIfStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.21,IP-MIB::ipIfStatsHCOutRequests,Counter64,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipIfStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.23,IP-MIB::ipIfStatsOutForwDatagrams,Counter32,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.24,IP-MIB::ipIfStatsHCOutForwDatagrams,Counter64,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipIfStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.25,IP-MIB::ipIfStatsOutDiscards,Counter32,read-only,,current,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipIfStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.26,IP-MIB::ipIfStatsOutFragReqds,Counter32,read-only,,current,,The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.27,IP-MIB::ipIfStatsOutFragOKs,Counter32,read-only,,current,,The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.28,IP-MIB::ipIfStatsOutFragFails,Counter32,read-only,,current,,The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.29,IP-MIB::ipIfStatsOutFragCreates,Counter32,read-only,,current,,The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.30,IP-MIB::ipIfStatsOutTransmits,Counter32,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.31,IP-MIB::ipIfStatsHCOutTransmits,Counter64,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipIfStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.32,IP-MIB::ipIfStatsOutOctets,Counter32,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipIfStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.33,IP-MIB::ipIfStatsHCOutOctets,Counter64,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipIfStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.34,IP-MIB::ipIfStatsInMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.35,IP-MIB::ipIfStatsHCInMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams received. This object counts the same datagrams as ipIfStatsInMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.36,IP-MIB::ipIfStatsInMcastOctets,Counter32,read-only,,current,,The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipIfStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.37,IP-MIB::ipIfStatsHCInMcastOctets,Counter64,read-only,,current,,The total number of octets received in IP multicast datagrams. This object counts the same octets as ipIfStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.38,IP-MIB::ipIfStatsOutMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.39,IP-MIB::ipIfStatsHCOutMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.40,IP-MIB::ipIfStatsOutMcastOctets,Counter32,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipIfStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.41,IP-MIB::ipIfStatsHCOutMcastOctets,Counter64,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipIfStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.42,IP-MIB::ipIfStatsInBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.43,IP-MIB::ipIfStatsHCInBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams received. This object counts the same datagrams as ipIfStatsInBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.44,IP-MIB::ipIfStatsOutBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.45,IP-MIB::ipIfStatsHCOutBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.46,IP-MIB::ipIfStatsDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.31.3.1.47,IP-MIB::ipIfStatsRefreshRate,Unsigned32,read-only,,current,,The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
.1.3.6.1.2.1.4.32,IP-MIB::ipAddressPrefixTable,,not-accessible,,current,,This table allows the user to determine the source of an IP address or set of IP addresses, and allows other tables to share the information via pointer rather than by copying. For example, when the node configures both a unicast and anycast address for a prefix, the ipAddressPrefix objects for those addresses will point to a single row in this table. This table primarily provides support for IPv6 prefixes, and several of the objects are less meaningful for IPv4. The table continues to allow IPv4 addresses to allow future flexibility. In order to promote a common configuration, this document includes suggestions for default values for IPv4 prefixes. Each of these values may be overridden if an object is meaningful to the node. All prefixes used by this entity should be included in this table independent of how the entity learned the prefix. (This table isn't limited to prefixes learned from router advertisements.)
.1.3.6.1.2.1.4.32.1,IP-MIB::ipAddressPrefixEntry,,not-accessible,ipAddressPrefixIfIndex:ipAddressPrefixType:ipAddressPrefixPrefix:ipAddressPrefixLength,current,,An entry in the ipAddressPrefixTable.
.1.3.6.1.2.1.4.32.1.1,IP-MIB::ipAddressPrefixIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.32.1.2,IP-MIB::ipAddressPrefixType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ipAddressPrefix.
.1.3.6.1.2.1.4.32.1.3,IP-MIB::ipAddressPrefixPrefix,OCTET,not-accessible,,current,,The address prefix. The address type of this object is specified in ipAddressPrefixType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after ipAddressPrefixLength must be zero. Implementors need to be aware that, if the size of ipAddressPrefixPrefix exceeds 114 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.32.1.4,IP-MIB::ipAddressPrefixLength,Unsigned32,not-accessible,,current,,The prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address '::/0'.
.1.3.6.1.2.1.4.32.1.5,IP-MIB::ipAddressPrefixOrigin,INTEGER,read-only,,current,other(1):manual(2):wellknown(3):dhcp(4):routeradv(5),The origin of this prefix.
.1.3.6.1.2.1.4.32.1.6,IP-MIB::ipAddressPrefixOnLinkFlag,INTEGER,read-only,,current,true(1):false(2),This object has the value 'true(1)', if this prefix can be used for on-link determination; otherwise, the value is 'false(2)'. The default for IPv4 prefixes is 'true(1)'.
.1.3.6.1.2.1.4.32.1.7,IP-MIB::ipAddressPrefixAutonomousFlag,INTEGER,read-only,,current,true(1):false(2),Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e., can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address. The default for IPv4 prefixes is 'false(2)'.
.1.3.6.1.2.1.4.32.1.8,IP-MIB::ipAddressPrefixAdvPreferredLifetime,Unsigned32,read-only,,current,,The remaining length of time, in seconds, that this prefix will continue to be preferred, i.e., time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. The default for IPv4 prefixes is 4,294,967,295 (infinity).
.1.3.6.1.2.1.4.32.1.9,IP-MIB::ipAddressPrefixAdvValidLifetime,Unsigned32,read-only,,current,,The remaining length of time, in seconds, that this prefix will continue to be valid, i.e., time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet. The default for IPv4 prefixes is 4,294,967,295 (infinity).
.1.3.6.1.2.1.4.33,IP-MIB::ipAddressSpinLock,INTEGER,read-write,,current,,An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipAddressTableSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command, including the retrieved value of ipAddressSpinLock. If another manager has altered the table in the meantime, then the value of ipAddressSpinLock will have changed, and the creation will fail as it will be specifying an incorrect value for ipAddressSpinLock. It is suggested, but not required, that the ipAddressSpinLock be the first var bind for each set of objects representing a 'row' in a PDU.
.1.3.6.1.2.1.4.34,IP-MIB::ipAddressTable,,not-accessible,,current,,This table contains addressing information relevant to the entity's interfaces. This table does not contain multicast address information. Tables for such information should be contained in multicast specific MIBs, such as RFC 3019. While this table is writable, the user will note that several objects, such as ipAddressOrigin, are not. The intention in allowing a user to write to this table is to allow them to add or remove any entry that isn't permanent. The user should be allowed to modify objects and entries when that would not cause inconsistencies within the table. Allowing write access to objects, such as ipAddressOrigin, could allow a user to insert an entry and then label it incorrectly. Note well: When including IPv6 link-local addresses in this table, the entry must use an InetAddressType of 'ipv6z' in order to differentiate between the possible interfaces.
.1.3.6.1.2.1.4.34.1,IP-MIB::ipAddressEntry,,not-accessible,ipAddressAddrType:ipAddressAddr,current,,An address mapping for a particular interface.
.1.3.6.1.2.1.4.34.1.1,IP-MIB::ipAddressAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ipAddressAddr.
.1.3.6.1.2.1.4.34.1.2,IP-MIB::ipAddressAddr,OCTET,not-accessible,,current,,The IP address to which this entry's addressing information pertains. The address type of this object is specified in ipAddressAddrType. Implementors need to be aware that if the size of ipAddressAddr exceeds 116 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.34.1.3,IP-MIB::ipAddressIfIndex,Integer32,read-create,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.34.1.4,IP-MIB::ipAddressType,INTEGER,read-create,,current,unicast(1):anycast(2):broadcast(3),The type of address. broadcast(3) is not a valid value for IPv6 addresses (RFC 3513).
.1.3.6.1.2.1.4.34.1.5,IP-MIB::ipAddressPrefix,OBJECT,read-only,,current,,A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row.
.1.3.6.1.2.1.4.34.1.6,IP-MIB::ipAddressOrigin,INTEGER,read-only,,current,other(1):manual(2):dhcp(4):linklayer(5):random(6),The origin of the address.
.1.3.6.1.2.1.4.34.1.7,IP-MIB::ipAddressStatus,INTEGER,read-create,,current,preferred(1):deprecated(2):invalid(3):inaccessible(4):unknown(5):tentative(6):duplicate(7):optimistic(8),The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).
.1.3.6.1.2.1.4.34.1.8,IP-MIB::ipAddressCreated,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.34.1.9,IP-MIB::ipAddressLastChanged,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.34.1.10,IP-MIB::ipAddressRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipAddressIfIndex has been set to a valid index.
.1.3.6.1.2.1.4.34.1.11,IP-MIB::ipAddressStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. If this object has a value of 'permanent', then no other objects are required to be able to be modified.
.1.3.6.1.2.1.4.35,IP-MIB::ipNetToPhysicalTable,,not-accessible,,current,,The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries. While many protocols may be used to populate this table, ARP and Neighbor Discovery are the most likely options.
.1.3.6.1.2.1.4.35.1,IP-MIB::ipNetToPhysicalEntry,,not-accessible,ipNetToPhysicalIfIndex:ipNetToPhysicalNetAddressType:ipNetToPhysicalNetAddress,current,,Each entry contains one IP address to `physical' address equivalence.
.1.3.6.1.2.1.4.35.1.1,IP-MIB::ipNetToPhysicalIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.35.1.2,IP-MIB::ipNetToPhysicalNetAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of ipNetToPhysicalNetAddress.
.1.3.6.1.2.1.4.35.1.3,IP-MIB::ipNetToPhysicalNetAddress,OCTET,not-accessible,,current,,The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in ipNetToPhysicalAddressType. Implementors need to be aware that if the size of ipNetToPhysicalNetAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.35.1.4,IP-MIB::ipNetToPhysicalPhysAddress,OCTET,read-create,,current,,The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage.
.1.3.6.1.2.1.4.35.1.5,IP-MIB::ipNetToPhysicalLastUpdated,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.35.1.6,IP-MIB::ipNetToPhysicalType,INTEGER,read-create,,current,other(1):invalid(2):dynamic(3):static(4):local(5),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToPhysicalTable. That is, it effectively dis- associates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToPhysicalType object. The 'dynamic(3)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g., IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(4)' type indicates that the mapping has been statically configured. Both of these refer to entries that provide mappings for other entities addresses. The 'local(5)' type indicates that the mapping is provided for an entity's own interface address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage.
.1.3.6.1.2.1.4.35.1.7,IP-MIB::ipNetToPhysicalState,INTEGER,read-only,,current,reachable(1):stale(2):delay(3):probe(4):invalid(5):unknown(6):incomplete(7),The Neighbor Unreachability Detection state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (e.g. for IPv4), this object is always unknown(6).
.1.3.6.1.2.1.4.35.1.8,IP-MIB::ipNetToPhysicalRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipNetToPhysicalPhysAddress object has been set. Note that if the ipNetToPhysicalType is set to 'invalid', the managed node may delete the entry independent of the state of this object.
.1.3.6.1.2.1.4.36,IP-MIB::ipv6ScopeZoneIndexTable,,not-accessible,,current,,The table used to describe IPv6 unicast and multicast scope zones. For those objects that have names rather than numbers, the names were chosen to coincide with the names used in the IPv6 address architecture document. 
.1.3.6.1.2.1.4.36.1,IP-MIB::ipv6ScopeZoneIndexEntry,,not-accessible,ipv6ScopeZoneIndexIfIndex,current,,Each entry contains the list of scope identifiers on a given interface.
.1.3.6.1.2.1.4.36.1.1,IP-MIB::ipv6ScopeZoneIndexIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.36.1.2,IP-MIB::ipv6ScopeZoneIndexLinkLocal,Unsigned32,read-only,,current,,The zone index for the link-local scope on this interface.
.1.3.6.1.2.1.4.36.1.3,IP-MIB::ipv6ScopeZoneIndex3,Unsigned32,read-only,,current,,The zone index for scope 3 on this interface.
.1.3.6.1.2.1.4.36.1.4,IP-MIB::ipv6ScopeZoneIndexAdminLocal,Unsigned32,read-only,,current,,The zone index for the admin-local scope on this interface.
.1.3.6.1.2.1.4.36.1.5,IP-MIB::ipv6ScopeZoneIndexSiteLocal,Unsigned32,read-only,,current,,The zone index for the site-local scope on this interface.
.1.3.6.1.2.1.4.36.1.6,IP-MIB::ipv6ScopeZoneIndex6,Unsigned32,read-only,,current,,The zone index for scope 6 on this interface.
.1.3.6.1.2.1.4.36.1.7,IP-MIB::ipv6ScopeZoneIndex7,Unsigned32,read-only,,current,,The zone index for scope 7 on this interface.
.1.3.6.1.2.1.4.36.1.8,IP-MIB::ipv6ScopeZoneIndexOrganizationLocal,Unsigned32,read-only,,current,,The zone index for the organization-local scope on this interface.
.1.3.6.1.2.1.4.36.1.9,IP-MIB::ipv6ScopeZoneIndex9,Unsigned32,read-only,,current,,The zone index for scope 9 on this interface.
.1.3.6.1.2.1.4.36.1.10,IP-MIB::ipv6ScopeZoneIndexA,Unsigned32,read-only,,current,,The zone index for scope A on this interface.
.1.3.6.1.2.1.4.36.1.11,IP-MIB::ipv6ScopeZoneIndexB,Unsigned32,read-only,,current,,The zone index for scope B on this interface.
.1.3.6.1.2.1.4.36.1.12,IP-MIB::ipv6ScopeZoneIndexC,Unsigned32,read-only,,current,,The zone index for scope C on this interface.
.1.3.6.1.2.1.4.36.1.13,IP-MIB::ipv6ScopeZoneIndexD,Unsigned32,read-only,,current,,The zone index for scope D on this interface.
.1.3.6.1.2.1.4.37,IP-MIB::ipDefaultRouterTable,,not-accessible,,current,,The table used to describe the default routers known to this entity.
.1.3.6.1.2.1.4.37.1,IP-MIB::ipDefaultRouterEntry,,not-accessible,ipDefaultRouterAddressType:ipDefaultRouterAddress:ipDefaultRouterIfIndex,current,,Each entry contains information about a default router known to this entity.
.1.3.6.1.2.1.4.37.1.1,IP-MIB::ipDefaultRouterAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type for this row.
.1.3.6.1.2.1.4.37.1.2,IP-MIB::ipDefaultRouterAddress,OCTET,not-accessible,,current,,The IP address of the default router represented by this row. The address type of this object is specified in ipDefaultRouterAddressType. Implementers need to be aware that if the size of ipDefaultRouterAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.37.1.3,IP-MIB::ipDefaultRouterIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface by which the router can be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.37.1.4,IP-MIB::ipDefaultRouterLifetime,Unsigned32,read-only,,current,,The remaining length of time, in seconds, that this router will continue to be useful as a default router. A value of zero indicates that it is no longer useful as a default router. It is left to the implementer of the MIB as to whether a router with a lifetime of zero is removed from the list. For IPv6, this value should be extracted from the router advertisement messages.
.1.3.6.1.2.1.4.37.1.5,IP-MIB::ipDefaultRouterPreference,INTEGER,read-only,,current,reserved(-2):low(-1):medium(0):high(1),An indication of preference given to this router as a default router as described in he Default Router Preferences document. Treating the value as a 2 bit signed integer allows for simple arithmetic comparisons. For IPv4 routers or IPv6 routers that are not using the updated router advertisement format, this object is set to medium (0).
.1.3.6.1.2.1.4.38,IP-MIB::ipv6RouterAdvertSpinLock,INTEGER,read-write,,current,,An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipv6RouterAdvertSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command including the retrieved value of ipv6RouterAdvertSpinLock. If another manager has altered the table in the meantime, then the value of ipv6RouterAdvertSpinLock will have changed and the creation will fail as it will be specifying an incorrect value for ipv6RouterAdvertSpinLock. It is suggested, but not required, that the ipv6RouterAdvertSpinLock be the first var bind for each set of objects representing a 'row' in a PDU.
.1.3.6.1.2.1.4.39,IP-MIB::ipv6RouterAdvertTable,,not-accessible,,current,,The table containing information used to construct router advertisements.
.1.3.6.1.2.1.4.39.1,IP-MIB::ipv6RouterAdvertEntry,,not-accessible,ipv6RouterAdvertIfIndex,current,,An entry containing information used to construct router advertisements. Information in this table is persistent, and when this object is written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.4.39.1.1,IP-MIB::ipv6RouterAdvertIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface on which router advertisements constructed with this information will be transmitted. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.39.1.2,IP-MIB::ipv6RouterAdvertSendAdverts,INTEGER,read-create,,current,true(1):false(2),A flag indicating whether the router sends periodic router advertisements and responds to router solicitations on this interface.
.1.3.6.1.2.1.4.39.1.3,IP-MIB::ipv6RouterAdvertMaxInterval,Unsigned32,read-create,,current,,The maximum time allowed between sending unsolicited router advertisements from this interface.
.1.3.6.1.2.1.4.39.1.4,IP-MIB::ipv6RouterAdvertMinInterval,Unsigned32,read-create,,current,,The minimum time allowed between sending unsolicited router advertisements from this interface. The default is 0.33 * ipv6RouterAdvertMaxInterval, however, in the case of a low value for ipv6RouterAdvertMaxInterval, the minimum value for this object is restricted to 3.
.1.3.6.1.2.1.4.39.1.5,IP-MIB::ipv6RouterAdvertManagedFlag,INTEGER,read-create,,current,true(1):false(2),The true/false value to be placed into the 'managed address configuration' flag field in router advertisements sent from this interface.
.1.3.6.1.2.1.4.39.1.6,IP-MIB::ipv6RouterAdvertOtherConfigFlag,INTEGER,read-create,,current,true(1):false(2),The true/false value to be placed into the 'other stateful configuration' flag field in router advertisements sent from this interface.
.1.3.6.1.2.1.4.39.1.7,IP-MIB::ipv6RouterAdvertLinkMTU,Unsigned32,read-create,,current,,The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent.
.1.3.6.1.2.1.4.39.1.8,IP-MIB::ipv6RouterAdvertReachableTime,Unsigned32,read-create,,current,,The value to be placed in the reachable time field in router advertisement messages sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for reachable time.
.1.3.6.1.2.1.4.39.1.9,IP-MIB::ipv6RouterAdvertRetransmitTime,Unsigned32,read-create,,current,,The value to be placed in the retransmit timer field in router advertisements sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for retrans time.
.1.3.6.1.2.1.4.39.1.10,IP-MIB::ipv6RouterAdvertCurHopLimit,Unsigned32,read-create,,current,,The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for curHopLimit. The default should be set to the value specified in the IANA web pages (www.iana.org) at the time of implementation.
.1.3.6.1.2.1.4.39.1.11,IP-MIB::ipv6RouterAdvertDefaultLifetime,Unsigned32,read-create,,current,,The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between ipv6RouterAdvertMaxInterval and 9000 seconds. A value of zero indicates that the router is not to be used as a default router. The default is 3 * ipv6RouterAdvertMaxInterval.
.1.3.6.1.2.1.4.39.1.12,IP-MIB::ipv6RouterAdvertRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. As all objects in this conceptual row have default values, a row can be created and made active by setting this object appropriately. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.5.29,IP-MIB::icmpStatsTable,,not-accessible,,current,,The table of generic system-wide ICMP counters.
.1.3.6.1.2.1.5.29.1,IP-MIB::icmpStatsEntry,,not-accessible,icmpStatsIPVersion,current,,A conceptual row in the icmpStatsTable.
.1.3.6.1.2.1.5.29.1.1,IP-MIB::icmpStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of the statistics.
.1.3.6.1.2.1.5.29.1.2,IP-MIB::icmpStatsInMsgs,Counter32,read-only,,current,,The total number of ICMP messages that the entity received. Note that this counter includes all those counted by icmpStatsInErrors.
.1.3.6.1.2.1.5.29.1.3,IP-MIB::icmpStatsInErrors,Counter32,read-only,,current,,The number of ICMP messages that the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.29.1.4,IP-MIB::icmpStatsOutMsgs,Counter32,read-only,,current,,The total number of ICMP messages that the entity attempted to send. Note that this counter includes all those counted by icmpStatsOutErrors.
.1.3.6.1.2.1.5.29.1.5,IP-MIB::icmpStatsOutErrors,Counter32,read-only,,current,,The number of ICMP messages that this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resultant datagram. In some implementations, there may be no types of error that contribute to this counter's value.
.1.3.6.1.2.1.5.30,IP-MIB::icmpMsgStatsTable,,not-accessible,,current,,The table of system-wide per-version, per-message type ICMP counters.
.1.3.6.1.2.1.5.30.1,IP-MIB::icmpMsgStatsEntry,,not-accessible,icmpMsgStatsIPVersion:icmpMsgStatsType,current,,A conceptual row in the icmpMsgStatsTable. The system should track each ICMP type value, even if that ICMP type is not supported by the system. However, a given row need not be instantiated unless a message of that type has been processed, i.e., the row for icmpMsgStatsType=X MAY be instantiated before but MUST be instantiated after the first message with Type=X is received or transmitted. After receiving or transmitting any succeeding messages with Type=X, the relevant counter must be incremented.
.1.3.6.1.2.1.5.30.1.1,IP-MIB::icmpMsgStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of the statistics.
.1.3.6.1.2.1.5.30.1.2,IP-MIB::icmpMsgStatsType,Integer32,not-accessible,,current,,The ICMP type field of the message type being counted by this row. Note that ICMP message types are scoped by the address type in use.
.1.3.6.1.2.1.5.30.1.3,IP-MIB::icmpMsgStatsInPkts,Counter32,read-only,,current,,The number of input packets for this AF and type.
.1.3.6.1.2.1.5.30.1.4,IP-MIB::icmpMsgStatsOutPkts,Counter32,read-only,,current,,The number of output packets for this AF and type.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.11.31,SNMPv2-MIB::snmpSilentDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response Class PDU (such as a Response-PDU) with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request.
.1.3.6.1.2.1.11.32,SNMPv2-MIB::snmpProxyDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response Class PDU (such as a Response-PDU) could be returned.
.1.3.6.1.2.1.14,OSPF-MIB::ospf,,,,,,The MIB module to describe the OSPF Version 2 Protocol. Note that some objects in this MIB module may pose a significant security risk. Refer to the Security Considerations section in RFC 4750 for more information. Copyright (C) The IETF Trust (2006). This version of this MIB module is part of RFC 4750; see the RFC itself for full legal notices.
.1.3.6.1.2.1.14.1,OSPF-MIB::ospfGeneralGroup,,,,,,
.1.3.6.1.2.1.14.1.1,OSPF-MIB::ospfRouterId,IpAddress,read-write,,current,,A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.2,OSPF-MIB::ospfAdminStat,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.3,OSPF-MIB::ospfVersionNumber,INTEGER,read-only,,current,version2(2),The current version number of the OSPF protocol is 2.
.1.3.6.1.2.1.14.1.4,OSPF-MIB::ospfAreaBdrRtrStatus,INTEGER,read-only,,current,true(1):false(2),A flag to note whether this router is an Area Border Router.
.1.3.6.1.2.1.14.1.5,OSPF-MIB::ospfASBdrRtrStatus,INTEGER,read-write,,current,true(1):false(2),A flag to note whether this router is configured as an Autonomous System Border Router. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.6,OSPF-MIB::ospfExternLsaCount,Gauge32,read-only,,current,,The number of external (LS type-5) link state advertisements in the link state database.
.1.3.6.1.2.1.14.1.7,OSPF-MIB::ospfExternLsaCksumSum,Integer32,read-only,,current,,The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums.
.1.3.6.1.2.1.14.1.8,OSPF-MIB::ospfTOSSupport,INTEGER,read-write,,current,true(1):false(2),The router's support for type-of-service routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.9,OSPF-MIB::ospfOriginateNewLsas,Counter32,read-only,,current,,The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.1.10,OSPF-MIB::ospfRxNewLsas,Counter32,read-only,,current,,The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.1.11,OSPF-MIB::ospfExtLsdbLimit,Integer32,read-write,,current,,The maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external LSAs in a router's link state database reaches ospfExtLsdbLimit, the router enters overflow state. The router never holds more than ospfExtLsdbLimit non-default AS-external LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area (i.e., OSPF stub areas and NSSAs are excluded). This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.12,OSPF-MIB::ospfMulticastExtensions,Integer32,read-write,,current,,A bit mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the multicast extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area multicast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Autonomous Systems (called inter-AS multicast routing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting), and 7 (multicasting everywhere). By default, no multicast forwarding is enabled. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.13,OSPF-MIB::ospfExitOverflowInterval,Integer32,read-write,,current,,The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external LSAs. When set to 0, the router will not leave overflow state until restarted. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.14,OSPF-MIB::ospfDemandExtensions,INTEGER,read-write,,current,true(1):false(2),The router's support for demand routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.15,OSPF-MIB::ospfRFC1583Compatibility,INTEGER,read-write,,current,true(1):false(2),Indicates metrics used to choose among multiple AS-external LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external LSAs advertising the same destination. When RFC1583Compatibility is set to disabled, preference will be driven first by type of path using cost only to break ties. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.16,OSPF-MIB::ospfOpaqueLsaSupport,INTEGER,read-only,,current,true(1):false(2),The router's support for Opaque LSA types.
.1.3.6.1.2.1.14.1.17,OSPF-MIB::ospfReferenceBandwidth,Unsigned32,read-write,,current,,Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.18,OSPF-MIB::ospfRestartSupport,INTEGER,read-write,,current,none(1):plannedOnly(2):plannedAndUnplanned(3),The router's support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.19,OSPF-MIB::ospfRestartInterval,Integer32,read-write,,current,,Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.20,OSPF-MIB::ospfRestartStrictLsaChecking,INTEGER,read-write,,current,true(1):false(2),Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.21,OSPF-MIB::ospfRestartStatus,INTEGER,read-only,,current,notRestarting(1):plannedRestart(2):unplannedRestart(3),Current status of OSPF graceful restart.
.1.3.6.1.2.1.14.1.22,OSPF-MIB::ospfRestartAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval.
.1.3.6.1.2.1.14.1.23,OSPF-MIB::ospfRestartExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway.
.1.3.6.1.2.1.14.1.24,OSPF-MIB::ospfAsLsaCount,Gauge32,read-only,,current,,The number of AS-scope link state advertisements in the AS-scope link state database.
.1.3.6.1.2.1.14.1.25,OSPF-MIB::ospfAsLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determine if there has been a change in a router's AS-scope link state database, and to compare the AS-scope link state database of two routers.
.1.3.6.1.2.1.14.1.26,OSPF-MIB::ospfStubRouterSupport,INTEGER,read-only,,current,true(1):false(2),The router's support for stub router functionality.
.1.3.6.1.2.1.14.1.27,OSPF-MIB::ospfStubRouterAdvertisement,INTEGER,read-write,,current,doNotAdvertise(1):advertise(2),This object controls the advertisement of stub router LSAs by the router. The value doNotAdvertise will result in the advertisement of a standard router LSA and is the default value. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.28,OSPF-MIB::ospfDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.14.2,OSPF-MIB::ospfAreaTable,,not-accessible,,current,,Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area.
.1.3.6.1.2.1.14.2.1,OSPF-MIB::ospfAreaEntry,,not-accessible,ospfAreaId,current,,Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.2.1.1,OSPF-MIB::ospfAreaId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.2.1.14.2.1.2,OSPF-MIB::ospfAuthType,INTEGER,read-create,,obsolete,none(0):simplePassword(1):md5(2),The authentication type specified for an area.
.1.3.6.1.2.1.14.2.1.3,OSPF-MIB::ospfImportAsExtern,INTEGER,read-create,,current,importExternal(1):importNoExternal(2):importNssa(3),Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs
.1.3.6.1.2.1.14.2.1.4,OSPF-MIB::ospfSpfRuns,Counter32,read-only,,current,,The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.2.1.5,OSPF-MIB::ospfAreaBdrRtrCount,Gauge32,read-only,,current,,The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass.
.1.3.6.1.2.1.14.2.1.6,OSPF-MIB::ospfAsBdrRtrCount,Gauge32,read-only,,current,,The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass.
.1.3.6.1.2.1.14.2.1.7,OSPF-MIB::ospfAreaLsaCount,Gauge32,read-only,,current,,The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.
.1.3.6.1.2.1.14.2.1.8,OSPF-MIB::ospfAreaLsaCksumSum,Integer32,read-only,,current,,The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums.
.1.3.6.1.2.1.14.2.1.9,OSPF-MIB::ospfAreaSummary,INTEGER,read-create,,current,noAreaSummary(1):sendAreaSummary(2),The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not originate summary LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
.1.3.6.1.2.1.14.2.1.10,OSPF-MIB::ospfAreaStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.2.1.11,OSPF-MIB::ospfAreaNssaTranslatorRole,INTEGER,read-create,,current,always(1):candidate(2),Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.
.1.3.6.1.2.1.14.2.1.12,OSPF-MIB::ospfAreaNssaTranslatorState,INTEGER,read-only,,current,enabled(1):elected(2):disabled(3),Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA border router is NOT translating type-7 LSAs into type-5.
.1.3.6.1.2.1.14.2.1.13,OSPF-MIB::ospfAreaNssaTranslatorStabilityInterval,Integer32,read-create,,current,,The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.
.1.3.6.1.2.1.14.2.1.14,OSPF-MIB::ospfAreaNssaTranslatorEvents,Counter32,read-only,,current,,Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.3,OSPF-MIB::ospfStubAreaTable,,not-accessible,,current,,The set of metrics that will be advertised by a default Area Border Router into a stub area.
.1.3.6.1.2.1.14.3.1,OSPF-MIB::ospfStubAreaEntry,,not-accessible,ospfStubAreaId:ospfStubTOS,current,,The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.3.1.1,OSPF-MIB::ospfStubAreaId,IpAddress,read-only,,current,,The 32-bit identifier for the stub area. On creation, this can be derived from the instance.
.1.3.6.1.2.1.14.3.1.2,OSPF-MIB::ospfStubTOS,Integer32,read-only,,current,,The Type of Service associated with the metric. On creation, this can be derived from the instance.
.1.3.6.1.2.1.14.3.1.3,OSPF-MIB::ospfStubMetric,Integer32,read-create,,current,,The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas.
.1.3.6.1.2.1.14.3.1.4,OSPF-MIB::ospfStubStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.3.1.5,OSPF-MIB::ospfStubMetricType,INTEGER,read-create,,current,ospfMetric(1):comparableCost(2):nonComparable(3),This variable displays the type of metric advertised as a default route.
.1.3.6.1.2.1.14.4,OSPF-MIB::ospfLsdbTable,,not-accessible,,current,,The OSPF Process's link state database (LSDB). The LSDB contains the link state advertisements from throughout the areas that the device is attached to.
.1.3.6.1.2.1.14.4.1,OSPF-MIB::ospfLsdbEntry,,not-accessible,ospfLsdbAreaId:ospfLsdbType:ospfLsdbLsid:ospfLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.4.1.1,OSPF-MIB::ospfLsdbAreaId,IpAddress,read-only,,current,,The 32-bit identifier of the area from which the LSA was received.
.1.3.6.1.2.1.14.4.1.2,OSPF-MIB::ospfLsdbType,INTEGER,read-only,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for backward compatibility, but should be displayed in the ospfAsLsdbTable rather than here.
.1.3.6.1.2.1.14.4.1.3,OSPF-MIB::ospfLsdbLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.4.1.4,OSPF-MIB::ospfLsdbRouterId,IpAddress,read-only,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.4.1.5,OSPF-MIB::ospfLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.4.1.6,OSPF-MIB::ospfLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.4.1.7,OSPF-MIB::ospfLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.4.1.8,OSPF-MIB::ospfLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.
.1.3.6.1.2.1.14.5,OSPF-MIB::ospfAreaRangeTable,,not-accessible,,obsolete,,The Address Range Table acts as an adjunct to the Area Table. It describes those Address Range Summaries that are configured to be propagated from an Area to reduce the amount of information about it that is known beyond its borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that this table is obsoleted and is replaced by the Area Aggregate Table.
.1.3.6.1.2.1.14.5.1,OSPF-MIB::ospfAreaRangeEntry,,not-accessible,ospfAreaRangeAreaId:ospfAreaRangeNet,obsolete,,A single area address range. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.5.1.1,OSPF-MIB::ospfAreaRangeAreaId,IpAddress,read-only,,obsolete,,The area that the address range is to be found within.
.1.3.6.1.2.1.14.5.1.2,OSPF-MIB::ospfAreaRangeNet,IpAddress,read-only,,obsolete,,The IP address of the net or subnet indicated by the range.
.1.3.6.1.2.1.14.5.1.3,OSPF-MIB::ospfAreaRangeMask,IpAddress,read-create,,obsolete,,The subnet mask that pertains to the net or subnet.
.1.3.6.1.2.1.14.5.1.4,OSPF-MIB::ospfAreaRangeStatus,INTEGER,read-create,,obsolete,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.5.1.5,OSPF-MIB::ospfAreaRangeEffect,INTEGER,read-create,,obsolete,advertiseMatching(1):doNotAdvertiseMatching(2),Subnets subsumed by ranges either trigger the advertisement of the indicated summary (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
.1.3.6.1.2.1.14.6,OSPF-MIB::ospfHostTable,,not-accessible,,current,,The Host/Metric Table indicates what hosts are directly attached to the router, what metrics and types of service should be advertised for them, and what areas they are found within.
.1.3.6.1.2.1.14.6.1,OSPF-MIB::ospfHostEntry,,not-accessible,ospfHostIpAddress:ospfHostTOS,current,,A metric to be advertised, for a given type of service, when a given host is reachable. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.6.1.1,OSPF-MIB::ospfHostIpAddress,IpAddress,read-only,,current,,The IP address of the host.
.1.3.6.1.2.1.14.6.1.2,OSPF-MIB::ospfHostTOS,Integer32,read-only,,current,,The Type of Service of the route being configured.
.1.3.6.1.2.1.14.6.1.3,OSPF-MIB::ospfHostMetric,Integer32,read-create,,current,,The metric to be advertised.
.1.3.6.1.2.1.14.6.1.4,OSPF-MIB::ospfHostStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.6.1.5,OSPF-MIB::ospfHostAreaID,IpAddress,read-only,,deprecated,,The OSPF area to which the host belongs. Deprecated by ospfHostCfgAreaID.
.1.3.6.1.2.1.14.6.1.6,OSPF-MIB::ospfHostCfgAreaID,IpAddress,read-create,,current,,To configure the OSPF area to which the host belongs.
.1.3.6.1.2.1.14.7,OSPF-MIB::ospfIfTable,,not-accessible,,current,,The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. It augments the ipAddrTable with OSPF specific information.
.1.3.6.1.2.1.14.7.1,OSPF-MIB::ospfIfEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,The OSPF interface entry describes one interface from the viewpoint of OSPF. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.7.1.1,OSPF-MIB::ospfIfIpAddress,IpAddress,read-only,,current,,The IP address of this OSPF interface.
.1.3.6.1.2.1.14.7.1.2,OSPF-MIB::ospfAddressLessIf,Integer32,read-only,,current,,For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.
.1.3.6.1.2.1.14.7.1.3,OSPF-MIB::ospfIfAreaId,IpAddress,read-create,,current,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.2.1.14.7.1.4,OSPF-MIB::ospfIfType,INTEGER,read-create,,current,broadcast(1):nbma(2):pointToPoint(3):pointToMultipoint(5),The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
.1.3.6.1.2.1.14.7.1.5,OSPF-MIB::ospfIfAdminStat,INTEGER,read-create,,current,enabled(1):disabled(2),The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
.1.3.6.1.2.1.14.7.1.6,OSPF-MIB::ospfIfRtrPriority,Integer32,read-create,,current,,The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
.1.3.6.1.2.1.14.7.1.7,OSPF-MIB::ospfIfTransitDelay,Integer32,read-create,,current,,The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.7.1.8,OSPF-MIB::ospfIfRetransInterval,Integer32,read-create,,current,,The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. Note that minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.7.1.9,OSPF-MIB::ospfIfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.14.7.1.10,OSPF-MIB::ospfIfRtrDeadInterval,Integer32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.14.7.1.11,OSPF-MIB::ospfIfPollInterval,Integer32,read-create,,current,,The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
.1.3.6.1.2.1.14.7.1.12,OSPF-MIB::ospfIfState,INTEGER,read-only,,current,down(1):loopback(2):waiting(3):pointToPoint(4):designatedRouter(5):backupDesignatedRouter(6):otherDesignatedRouter(7),The OSPF Interface State.
.1.3.6.1.2.1.14.7.1.13,OSPF-MIB::ospfIfDesignatedRouter,IpAddress,read-only,,current,,The IP address of the designated router.
.1.3.6.1.2.1.14.7.1.14,OSPF-MIB::ospfIfBackupDesignatedRouter,IpAddress,read-only,,current,,The IP address of the backup designated router.
.1.3.6.1.2.1.14.7.1.15,OSPF-MIB::ospfIfEvents,Counter32,read-only,,current,,The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.7.1.16,OSPF-MIB::ospfIfAuthKey,OCTET,read-create,,current,,The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords [RFC1704]. When read, ospfIfAuthKey always returns an octet string of length zero.
.1.3.6.1.2.1.14.7.1.17,OSPF-MIB::ospfIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.7.1.18,OSPF-MIB::ospfIfMulticastForwarding,INTEGER,read-create,,current,blocked(1):multicast(2):unicast(3),The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effectively disables all multicast forwarding.
.1.3.6.1.2.1.14.7.1.19,OSPF-MIB::ospfIfDemand,INTEGER,read-create,,current,true(1):false(2),Indicates whether Demand OSPF procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.
.1.3.6.1.2.1.14.7.1.20,OSPF-MIB::ospfIfAuthType,INTEGER,read-create,,current,none(0):simplePassword(1):md5(2),The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router.
.1.3.6.1.2.1.14.7.1.21,OSPF-MIB::ospfIfLsaCount,Gauge32,read-only,,current,,The total number of link-local link state advertisements in this interface's link-local link state database.
.1.3.6.1.2.1.14.7.1.22,OSPF-MIB::ospfIfLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link state database and to compare the interface link state database of routers attached to the same subnet.
.1.3.6.1.2.1.14.7.1.23,OSPF-MIB::ospfIfDesignatedRouterId,IpAddress,read-only,,current,,The Router ID of the designated router.
.1.3.6.1.2.1.14.7.1.24,OSPF-MIB::ospfIfBackupDesignatedRouterId,IpAddress,read-only,,current,,The Router ID of the backup designated router.
.1.3.6.1.2.1.14.8,OSPF-MIB::ospfIfMetricTable,,not-accessible,,current,,The Metric Table describes the metrics to be advertised for a specified interface at the various types of service. As such, this table is an adjunct of the OSPF Interface Table. Types of service, as defined by RFC 791, have the ability to request low delay, high bandwidth, or reliable linkage. For the purposes of this specification, the measure of bandwidth: Metric = referenceBandwidth / ifSpeed is the default value. The default reference bandwidth is 10^8. For multiple link interfaces, note that ifSpeed is the sum of the individual link speeds. This yields a number having the following typical values: Network Type/bit rate Metric >= 100 MBPS 1 Ethernet/802.3 10 E1 48 T1 (ESF) 65 64 KBPS 1562 56 KBPS 1785 19.2 KBPS 5208 9.6 KBPS 10416 Routes that are not specified use the default (TOS 0) metric. Note that the default reference bandwidth can be configured using the general group object ospfReferenceBandwidth.
.1.3.6.1.2.1.14.8.1,OSPF-MIB::ospfIfMetricEntry,,not-accessible,ospfIfMetricIpAddress:ospfIfMetricAddressLessIf:ospfIfMetricTOS,current,,A particular TOS metric for a non-virtual interface identified by the interface index. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.8.1.1,OSPF-MIB::ospfIfMetricIpAddress,IpAddress,read-only,,current,,The IP address of this OSPF interface. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.2,OSPF-MIB::ospfIfMetricAddressLessIf,Integer32,read-only,,current,,For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the value of ifIndex for interfaces having no IP address. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.3,OSPF-MIB::ospfIfMetricTOS,Integer32,read-only,,current,,The Type of Service metric being referenced. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.4,OSPF-MIB::ospfIfMetricValue,Integer32,read-create,,current,,The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed.
.1.3.6.1.2.1.14.8.1.5,OSPF-MIB::ospfIfMetricStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.9,OSPF-MIB::ospfVirtIfTable,,not-accessible,,current,,Information about this router's virtual interfaces that the OSPF Process is configured to carry on.
.1.3.6.1.2.1.14.9.1,OSPF-MIB::ospfVirtIfEntry,,not-accessible,ospfVirtIfAreaId:ospfVirtIfNeighbor,current,,Information about a single virtual interface. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.9.1.1,OSPF-MIB::ospfVirtIfAreaId,IpAddress,read-only,,current,,The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.
.1.3.6.1.2.1.14.9.1.2,OSPF-MIB::ospfVirtIfNeighbor,IpAddress,read-only,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.14.9.1.3,OSPF-MIB::ospfVirtIfTransitDelay,Integer32,read-create,,current,,The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.9.1.4,OSPF-MIB::ospfVirtIfRetransInterval,Integer32,read-create,,current,,The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. This value should be well over the expected round-trip time. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.9.1.5,OSPF-MIB::ospfVirtIfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.14.9.1.6,OSPF-MIB::ospfVirtIfRtrDeadInterval,Integer32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.14.9.1.7,OSPF-MIB::ospfVirtIfState,INTEGER,read-only,,current,down(1):pointToPoint(4),OSPF virtual interface states.
.1.3.6.1.2.1.14.9.1.8,OSPF-MIB::ospfVirtIfEvents,Counter32,read-only,,current,,The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.9.1.9,OSPF-MIB::ospfVirtIfAuthKey,OCTET,read-create,,current,,The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords. [RFC1704] When read, ospfIfAuthKey always returns an octet string of length zero.
.1.3.6.1.2.1.14.9.1.10,OSPF-MIB::ospfVirtIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.9.1.11,OSPF-MIB::ospfVirtIfAuthType,INTEGER,read-create,,current,none(0):simplePassword(1):md5(2),The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router.
.1.3.6.1.2.1.14.9.1.12,OSPF-MIB::ospfVirtIfLsaCount,Gauge32,read-only,,current,,The total number of link-local link state advertisements in this virtual interface's link-local link state database.
.1.3.6.1.2.1.14.9.1.13,OSPF-MIB::ospfVirtIfLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual interface's link state database, and to compare the virtual interface link state database of the virtual neighbors.
.1.3.6.1.2.1.14.10,OSPF-MIB::ospfNbrTable,,not-accessible,,current,,A table describing all non-virtual neighbors in the locality of the OSPF router.
.1.3.6.1.2.1.14.10.1,OSPF-MIB::ospfNbrEntry,,not-accessible,ospfNbrIpAddr:ospfNbrAddressLessIndex,current,,The information regarding a single neighbor. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.10.1.1,OSPF-MIB::ospfNbrIpAddr,IpAddress,read-only,,current,,The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.
.1.3.6.1.2.1.14.10.1.2,OSPF-MIB::ospfNbrAddressLessIndex,Integer32,read-only,,current,,On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.10.1.3,OSPF-MIB::ospfNbrRtrId,IpAddress,read-only,,current,,A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.14.10.1.4,OSPF-MIB::ospfNbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external information; if zero, it is a stub area. Bit 2, if set, indicates that the system is capable of routing IP multicast datagrams, that is that it implements the multicast extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type-7 external advertisements, which are translated into type-5 external advertisements at NSSA borders.
.1.3.6.1.2.1.14.10.1.5,OSPF-MIB::ospfNbrPriority,Integer32,read-create,,current,,The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
.1.3.6.1.2.1.14.10.1.6,OSPF-MIB::ospfNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the relationship with this neighbor.
.1.3.6.1.2.1.14.10.1.7,OSPF-MIB::ospfNbrEvents,Counter32,read-only,,current,,The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.10.1.8,OSPF-MIB::ospfNbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.14.10.1.9,OSPF-MIB::ospfNbmaNbrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.10.1.10,OSPF-MIB::ospfNbmaNbrPermanence,INTEGER,read-only,,current,dynamic(1):permanent(2),This variable displays the status of the entry; 'dynamic' and 'permanent' refer to how the neighbor became known.
.1.3.6.1.2.1.14.10.1.11,OSPF-MIB::ospfNbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.14.10.1.12,OSPF-MIB::ospfNbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.10.1.13,OSPF-MIB::ospfNbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.14.10.1.14,OSPF-MIB::ospfNbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.11,OSPF-MIB::ospfVirtNbrTable,,not-accessible,,current,,This table describes all virtual neighbors. Since virtual links are configured in the Virtual Interface Table, this table is read-only.
.1.3.6.1.2.1.14.11.1,OSPF-MIB::ospfVirtNbrEntry,,not-accessible,ospfVirtNbrArea:ospfVirtNbrRtrId,current,,Virtual neighbor information.
.1.3.6.1.2.1.14.11.1.1,OSPF-MIB::ospfVirtNbrArea,IpAddress,read-only,,current,,The Transit Area Identifier.
.1.3.6.1.2.1.14.11.1.2,OSPF-MIB::ospfVirtNbrRtrId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.14.11.1.3,OSPF-MIB::ospfVirtNbrIpAddr,IpAddress,read-only,,current,,The IP address this virtual neighbor is using.
.1.3.6.1.2.1.14.11.1.4,OSPF-MIB::ospfVirtNbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is network multicast capable, i.e., that it implements OSPF multicast routing.
.1.3.6.1.2.1.14.11.1.5,OSPF-MIB::ospfVirtNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the virtual neighbor relationship.
.1.3.6.1.2.1.14.11.1.6,OSPF-MIB::ospfVirtNbrEvents,Counter32,read-only,,current,,The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.11.1.7,OSPF-MIB::ospfVirtNbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.14.11.1.8,OSPF-MIB::ospfVirtNbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.14.11.1.9,OSPF-MIB::ospfVirtNbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.11.1.10,OSPF-MIB::ospfVirtNbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.14.11.1.11,OSPF-MIB::ospfVirtNbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.12,OSPF-MIB::ospfExtLsdbTable,,not-accessible,,deprecated,,The OSPF Process's external LSA link state database. This table is identical to the OSPF LSDB Table in format, but contains only external link state advertisements. The purpose is to allow external LSAs to be displayed once for the router rather than once in each non-stub area. Note that external LSAs are also in the AS-scope link state database.
.1.3.6.1.2.1.14.12.1,OSPF-MIB::ospfExtLsdbEntry,,not-accessible,ospfExtLsdbType:ospfExtLsdbLsid:ospfExtLsdbRouterId,deprecated,,A single link state advertisement.
.1.3.6.1.2.1.14.12.1.1,OSPF-MIB::ospfExtLsdbType,INTEGER,read-only,,deprecated,asExternalLink(5),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.12.1.2,OSPF-MIB::ospfExtLsdbLsid,IpAddress,read-only,,deprecated,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.12.1.3,OSPF-MIB::ospfExtLsdbRouterId,IpAddress,read-only,,deprecated,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.12.1.4,OSPF-MIB::ospfExtLsdbSequence,Integer32,read-only,,deprecated,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.12.1.5,OSPF-MIB::ospfExtLsdbAge,Integer32,read-only,,deprecated,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.12.1.6,OSPF-MIB::ospfExtLsdbChecksum,Integer32,read-only,,deprecated,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.12.1.7,OSPF-MIB::ospfExtLsdbAdvertisement,OCTET,read-only,,deprecated,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.13,OSPF-MIB::ospfRouteGroup,,,,,,
.1.3.6.1.2.1.14.13.1,OSPF-MIB::ospfIntraArea,,,,,,
.1.3.6.1.2.1.14.13.2,OSPF-MIB::ospfInterArea,,,,,,
.1.3.6.1.2.1.14.13.3,OSPF-MIB::ospfExternalType1,,,,,,
.1.3.6.1.2.1.14.13.4,OSPF-MIB::ospfExternalType2,,,,,,
.1.3.6.1.2.1.14.14,OSPF-MIB::ospfAreaAggregateTable,,not-accessible,,current,,The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its purpose is to reduce the amount of information that is known beyond an Area's borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, a class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
.1.3.6.1.2.1.14.14.1,OSPF-MIB::ospfAreaAggregateEntry,,not-accessible,ospfAreaAggregateAreaID:ospfAreaAggregateLsdbType:ospfAreaAggregateNet:ospfAreaAggregateMask,current,,A single area aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.14.1.1,OSPF-MIB::ospfAreaAggregateAreaID,IpAddress,read-only,,current,,The area within which the address aggregate is to be found.
.1.3.6.1.2.1.14.14.1.2,OSPF-MIB::ospfAreaAggregateLsdbType,INTEGER,read-only,,current,summaryLink(3):nssaExternalLink(7),The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.
.1.3.6.1.2.1.14.14.1.3,OSPF-MIB::ospfAreaAggregateNet,IpAddress,read-only,,current,,The IP address of the net or subnet indicated by the range.
.1.3.6.1.2.1.14.14.1.4,OSPF-MIB::ospfAreaAggregateMask,IpAddress,read-only,,current,,The subnet mask that pertains to the net or subnet.
.1.3.6.1.2.1.14.14.1.5,OSPF-MIB::ospfAreaAggregateStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.14.1.6,OSPF-MIB::ospfAreaAggregateEffect,INTEGER,read-create,,current,advertiseMatching(1):doNotAdvertiseMatching(2),Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
.1.3.6.1.2.1.14.14.1.7,OSPF-MIB::ospfAreaAggregateExtRouteTag,Unsigned32,read-create,,current,,External route tag to be included in NSSA (type-7) LSAs.
.1.3.6.1.2.1.14.15,OSPF-MIB::ospfConformance,,,,,,
.1.3.6.1.2.1.14.15.1,OSPF-MIB::ospfGroups,,,,,,
.1.3.6.1.2.1.14.15.1.1,OSPF-MIB::ospfBasicGroup,,,,,,These objects are used to monitor/manage global OSPF parameters. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.2,OSPF-MIB::ospfAreaGroup,,,,,,These objects are used for OSPF systems supporting areas per RFC 1850.
.1.3.6.1.2.1.14.15.1.3,OSPF-MIB::ospfStubAreaGroup,,,,,,These objects are used for OSPF systems supporting stub areas.
.1.3.6.1.2.1.14.15.1.4,OSPF-MIB::ospfLsdbGroup,,,,,,These objects are used for OSPF systems that display their link state database.
.1.3.6.1.2.1.14.15.1.5,OSPF-MIB::ospfAreaRangeGroup,,,,,,These objects are used for non-CIDR OSPF systems that support multiple areas. This object group is obsolete.
.1.3.6.1.2.1.14.15.1.6,OSPF-MIB::ospfHostGroup,,,,,,These objects are used for OSPF systems that support attached hosts.
.1.3.6.1.2.1.14.15.1.7,OSPF-MIB::ospfIfGroup,,,,,,These objects are used to monitor/manage OSPF interfaces. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.8,OSPF-MIB::ospfIfMetricGroup,,,,,,These objects are used for OSPF systems for supporting interface metrics.
.1.3.6.1.2.1.14.15.1.9,OSPF-MIB::ospfVirtIfGroup,,,,,,These objects are used for OSPF systems for supporting virtual interfaces. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.10,OSPF-MIB::ospfNbrGroup,,,,,,These objects are used to monitor/manage OSPF neighbors. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.11,OSPF-MIB::ospfVirtNbrGroup,,,,,,These objects are used to monitor/manage OSPF virtual neighbors. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.12,OSPF-MIB::ospfExtLsdbGroup,,,,,,These objects are used for OSPF systems that display their link state database. This object group conforms to RFC 1850. This object group is replaced by the ospfAsLsdbGroup in order to support any AS-scope LSA type in a single table.
.1.3.6.1.2.1.14.15.1.13,OSPF-MIB::ospfAreaAggregateGroup,,,,,,These objects are used for OSPF systems to support network prefix aggregation across areas.
.1.3.6.1.2.1.14.15.1.14,OSPF-MIB::ospfLocalLsdbGroup,,,,,,These objects are used for OSPF systems that display their link-local link state databases for non-virtual links.
.1.3.6.1.2.1.14.15.1.15,OSPF-MIB::ospfVirtLocalLsdbGroup,,,,,,These objects are used for OSPF systems that display their link-local link state databases for virtual links.
.1.3.6.1.2.1.14.15.1.16,OSPF-MIB::ospfAsLsdbGroup,,,,,,These objects are used for OSPF systems that display their AS-scope link state database.
.1.3.6.1.2.1.14.15.1.17,OSPF-MIB::ospfBasicGroup2,,,,,,These objects are used to monitor/manage OSPF global parameters.
.1.3.6.1.2.1.14.15.1.18,OSPF-MIB::ospfAreaGroup2,,,,,,These objects are used by OSPF systems to support areas.
.1.3.6.1.2.1.14.15.1.19,OSPF-MIB::ospfIfGroup2,,,,,,These objects are used to monitor/manage OSPF interfaces.
.1.3.6.1.2.1.14.15.1.20,OSPF-MIB::ospfVirtIfGroup2,,,,,,These objects are used to monitor/manage OSPF virtual interfaces.
.1.3.6.1.2.1.14.15.1.21,OSPF-MIB::ospfNbrGroup2,,,,,,These objects are used to monitor/manage OSPF neighbors.
.1.3.6.1.2.1.14.15.1.22,OSPF-MIB::ospfVirtNbrGroup2,,,,,,These objects are used to monitor/manage OSPF virtual neighbors.
.1.3.6.1.2.1.14.15.1.23,OSPF-MIB::ospfAreaAggregateGroup2,,,,,,These objects are used for OSPF systems to support network prefix aggregation across areas.
.1.3.6.1.2.1.14.15.1.24,OSPF-MIB::ospfAreaLsaCountGroup,,,,,,These objects are used for OSPF systems that display per-area, per-LSA-type counters.
.1.3.6.1.2.1.14.15.1.25,OSPF-MIB::ospfHostGroup2,,,,,,These objects are used for OSPF systems that support attached hosts.
.1.3.6.1.2.1.14.15.1.26,OSPF-MIB::ospfObsoleteGroup,,,,,,These objects are obsolete and are no longer required for OSPF systems. They are placed into this group for SMI conformance.
.1.3.6.1.2.1.14.15.2,OSPF-MIB::ospfCompliances,,,,,,
.1.3.6.1.2.1.14.15.2.1,OSPF-MIB::ospfCompliance,,,,,,The compliance statement for OSPF systems conforming to RFC 1850.
.1.3.6.1.2.1.14.15.2.2,OSPF-MIB::ospfCompliance2,,,,,,The compliance statement.
.1.3.6.1.2.1.14.15.2.3,OSPF-MIB::ospfComplianceObsolete,,,,,,Contains obsolete object groups.
.1.3.6.1.2.1.14.17,OSPF-MIB::ospfLocalLsdbTable,,not-accessible,,current,,The OSPF Process's link-local link state database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local Link State Advertisements for non-virtual links. The purpose is to allow link-local LSAs to be displayed for each non-virtual interface. This table is implemented to support type-9 LSAs that are defined in 'The OSPF Opaque LSA Option'.
.1.3.6.1.2.1.14.17.1,OSPF-MIB::ospfLocalLsdbEntry,,not-accessible,ospfLocalLsdbIpAddress:ospfLocalLsdbAddressLessIf:ospfLocalLsdbType:ospfLocalLsdbLsid:ospfLocalLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.17.1.1,OSPF-MIB::ospfLocalLsdbIpAddress,IpAddress,not-accessible,,current,,The IP address of the interface from which the LSA was received if the interface is numbered.
.1.3.6.1.2.1.14.17.1.2,OSPF-MIB::ospfLocalLsdbAddressLessIf,Integer32,not-accessible,,current,,The interface index of the interface from which the LSA was received if the interface is unnumbered.
.1.3.6.1.2.1.14.17.1.3,OSPF-MIB::ospfLocalLsdbType,INTEGER,not-accessible,,current,localOpaqueLink(9),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.17.1.4,OSPF-MIB::ospfLocalLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.17.1.5,OSPF-MIB::ospfLocalLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.17.1.6,OSPF-MIB::ospfLocalLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.17.1.7,OSPF-MIB::ospfLocalLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.17.1.8,OSPF-MIB::ospfLocalLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.17.1.9,OSPF-MIB::ospfLocalLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.
.1.3.6.1.2.1.14.18,OSPF-MIB::ospfVirtLocalLsdbTable,,not-accessible,,current,,The OSPF Process's link-local link state database for virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local Link State Advertisements for virtual links. The purpose is to allow link-local LSAs to be displayed for each virtual interface. This table is implemented to support type-9 LSAs that are defined in 'The OSPF Opaque LSA Option'.
.1.3.6.1.2.1.14.18.1,OSPF-MIB::ospfVirtLocalLsdbEntry,,not-accessible,ospfVirtLocalLsdbTransitArea:ospfVirtLocalLsdbNeighbor:ospfVirtLocalLsdbType:ospfVirtLocalLsdbLsid:ospfVirtLocalLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.18.1.1,OSPF-MIB::ospfVirtLocalLsdbTransitArea,IpAddress,not-accessible,,current,,The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.
.1.3.6.1.2.1.14.18.1.2,OSPF-MIB::ospfVirtLocalLsdbNeighbor,IpAddress,not-accessible,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.14.18.1.3,OSPF-MIB::ospfVirtLocalLsdbType,INTEGER,not-accessible,,current,localOpaqueLink(9),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.18.1.4,OSPF-MIB::ospfVirtLocalLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.18.1.5,OSPF-MIB::ospfVirtLocalLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.18.1.6,OSPF-MIB::ospfVirtLocalLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.18.1.7,OSPF-MIB::ospfVirtLocalLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.18.1.8,OSPF-MIB::ospfVirtLocalLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.18.1.9,OSPF-MIB::ospfVirtLocalLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.19,OSPF-MIB::ospfAsLsdbTable,,not-accessible,,current,,The OSPF Process's AS-scope LSA link state database. The database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area.
.1.3.6.1.2.1.14.19.1,OSPF-MIB::ospfAsLsdbEntry,,not-accessible,ospfAsLsdbType:ospfAsLsdbLsid:ospfAsLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.19.1.1,OSPF-MIB::ospfAsLsdbType,INTEGER,not-accessible,,current,asExternalLink(5):asOpaqueLink(11),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.19.1.2,OSPF-MIB::ospfAsLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.19.1.3,OSPF-MIB::ospfAsLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.19.1.4,OSPF-MIB::ospfAsLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.19.1.5,OSPF-MIB::ospfAsLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.19.1.6,OSPF-MIB::ospfAsLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.19.1.7,OSPF-MIB::ospfAsLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.20,OSPF-MIB::ospfAreaLsaCountTable,,not-accessible,,current,,This table maintains per-area, per-LSA-type counters
.1.3.6.1.2.1.14.20.1,OSPF-MIB::ospfAreaLsaCountEntry,,not-accessible,ospfAreaLsaCountAreaId:ospfAreaLsaCountLsaType,current,,An entry with a number of link advertisements of a given type for a given area.
.1.3.6.1.2.1.14.20.1.1,OSPF-MIB::ospfAreaLsaCountAreaId,IpAddress,not-accessible,,current,,This entry Area ID.
.1.3.6.1.2.1.14.20.1.2,OSPF-MIB::ospfAreaLsaCountLsaType,INTEGER,not-accessible,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),This entry LSA type.
.1.3.6.1.2.1.14.20.1.3,OSPF-MIB::ospfAreaLsaCountNumber,Gauge32,read-only,,current,,Number of LSAs of a given type for a given area.
.1.3.6.1.2.1.16,RMON-MIB::rmon,,,,,,
.1.3.6.1.2.1.16.0,RMON-MIB::rmonEventsV2,,,,,,Definition point for RMON notifications.
.1.3.6.1.2.1.16.0.1,RMON-MIB::risingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.0.2,RMON-MIB::fallingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.1,RMON-MIB::statistics,,,,,,
.1.3.6.1.2.1.16.1.1,RMON-MIB::etherStatsTable,,not-accessible,,current,,A list of Ethernet statistics entries.
.1.3.6.1.2.1.16.1.1.1,RMON-MIB::etherStatsEntry,,not-accessible,etherStatsIndex,current,,A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
.1.3.6.1.2.1.16.1.1.1.1,RMON-MIB::etherStatsIndex,Integer32,read-only,,current,,The value of this object uniquely identifies this etherStats entry.
.1.3.6.1.2.1.16.1.1.1.2,RMON-MIB::etherStatsDataSource,OBJECT,read-create,,current,,This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.1.1.3,RMON-MIB::etherStatsDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.1.1.1.4,RMON-MIB::etherStatsOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
.1.3.6.1.2.1.16.1.1.1.5,RMON-MIB::etherStatsPkts,Counter32,read-only,,current,,The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
.1.3.6.1.2.1.16.1.1.1.6,RMON-MIB::etherStatsBroadcastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
.1.3.6.1.2.1.16.1.1.1.7,RMON-MIB::etherStatsMulticastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.1.1.8,RMON-MIB::etherStatsCRCAlignErrors,Counter32,read-only,,current,,The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.1.1.1.9,RMON-MIB::etherStatsUndersizePkts,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.10,RMON-MIB::etherStatsOversizePkts,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.11,RMON-MIB::etherStatsFragments,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.1.1.1.12,RMON-MIB::etherStatsJabbers,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.1.1.1.13,RMON-MIB::etherStatsCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.1.1.1.14,RMON-MIB::etherStatsPkts64Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.15,RMON-MIB::etherStatsPkts65to127Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.16,RMON-MIB::etherStatsPkts128to255Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.17,RMON-MIB::etherStatsPkts256to511Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.18,RMON-MIB::etherStatsPkts512to1023Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.19,RMON-MIB::etherStatsPkts1024to1518Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.20,RMON-MIB::etherStatsOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.1.1.21,RMON-MIB::etherStatsStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this etherStats entry.
.1.3.6.1.2.1.16.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.1.2.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsEntry,,not-accessible,tokenRingMLStatsIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.1.2.1.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.2.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingMLStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all error reports on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingMLStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.2.1.3,TOKEN-RING-RMON-MIB::tokenRingMLStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingPStatsDropEvents.
.1.3.6.1.2.1.16.1.2.1.4,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.2.1.5,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding packets that were not good frames) received.
.1.3.6.1.2.1.16.1.2.1.6,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the ring purge state from normal ring state. The ring purge state that comes in response to the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.7,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgePkts,Counter32,read-only,,mandatory,,The total number of ring purge MAC packets detected by probe.
.1.3.6.1.2.1.16.1.2.1.8,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) from a non-beaconing state. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.1.2.1.9,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconTime,INTEGER,read-only,,mandatory,,The total amount of time that the ring has been in the beaconing state.
.1.3.6.1.2.1.16.1.2.1.10,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.11,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state. The claim token state that comes in response to a beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.12,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.13,TOKEN-RING-RMON-MIB::tokenRingMLStatsNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe.
.1.3.6.1.2.1.16.1.2.1.14,TOKEN-RING-RMON-MIB::tokenRingMLStatsLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.15,TOKEN-RING-RMON-MIB::tokenRingMLStatsInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.16,TOKEN-RING-RMON-MIB::tokenRingMLStatsBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.17,TOKEN-RING-RMON-MIB::tokenRingMLStatsACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.18,TOKEN-RING-RMON-MIB::tokenRingMLStatsAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.19,TOKEN-RING-RMON-MIB::tokenRingMLStatsLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.20,TOKEN-RING-RMON-MIB::tokenRingMLStatsCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.21,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.22,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.23,TOKEN-RING-RMON-MIB::tokenRingMLStatsTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.24,TOKEN-RING-RMON-MIB::tokenRingMLStatsSoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe.
.1.3.6.1.2.1.16.1.2.1.25,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe (i.e. the number of ring polls initiated by the active monitor that were detected).
.1.3.6.1.2.1.16.1.2.1.26,TOKEN-RING-RMON-MIB::tokenRingMLStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.2.1.27,TOKEN-RING-RMON-MIB::tokenRingMLStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.1.3.1,TOKEN-RING-RMON-MIB::tokenRingPStatsEntry,,not-accessible,tokenRingPStatsIndex,mandatory,,A collection of promiscuous statistics kept for non-MAC packets on a particular Token Ring interface.
.1.3.6.1.2.1.16.1.3.1.1,TOKEN-RING-RMON-MIB::tokenRingPStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.3.1.2,TOKEN-RING-RMON-MIB::tokenRingPStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingPStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all non-MAC packets on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingPStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.3.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingMLStatsDropEvents
.1.3.6.1.2.1.16.1.3.1.4,TOKEN-RING-RMON-MIB::tokenRingPStatsDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets.
.1.3.6.1.2.1.16.1.3.1.5,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts,Counter32,read-only,,mandatory,,The total number of non-MAC packets in good frames. received.
.1.3.6.1.2.1.16.1.3.1.6,TOKEN-RING-RMON-MIB::tokenRingPStatsDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.1.3.1.7,TOKEN-RING-RMON-MIB::tokenRingPStatsDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.3.1.8,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.9,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.10,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.11,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.12,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.13,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.14,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.15,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.16,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.17,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.18,TOKEN-RING-RMON-MIB::tokenRingPStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.3.1.19,TOKEN-RING-RMON-MIB::tokenRingPStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.4,RMON2-MIB::etherStats2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1,RMON2-MIB::etherStats2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1.1,RMON2-MIB::etherStatsDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.4.1.2,RMON2-MIB::etherStatsCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.5,RMON2-MIB::tokenRingMLStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.5.1,RMON2-MIB::tokenRingMLStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.5.1.1,RMON2-MIB::tokenRingMLStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.5.1.2,RMON2-MIB::tokenRingMLStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.6,RMON2-MIB::tokenRingPStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.6.1,RMON2-MIB::tokenRingPStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.6.1.1,RMON2-MIB::tokenRingPStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.6.1.2,RMON2-MIB::tokenRingPStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.2,RMON-MIB::history,,,,,,
.1.3.6.1.2.1.16.2.1,RMON-MIB::historyControlTable,,not-accessible,,current,,A list of history control entries.
.1.3.6.1.2.1.16.2.1.1,RMON-MIB::historyControlEntry,,not-accessible,historyControlIndex,current,,A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2
.1.3.6.1.2.1.16.2.1.1.1,RMON-MIB::historyControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.
.1.3.6.1.2.1.16.2.1.1.2,RMON-MIB::historyControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.3,RMON-MIB::historyControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.2.1.1.4,RMON-MIB::historyControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry. When the associated historyControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated historyControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this historyControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this historyControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
.1.3.6.1.2.1.16.2.1.1.5,RMON-MIB::historyControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.6,RMON-MIB::historyControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.2.1.1.7,RMON-MIB::historyControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
.1.3.6.1.2.1.16.2.2,RMON-MIB::etherHistoryTable,,not-accessible,,current,,A list of Ethernet history entries.
.1.3.6.1.2.1.16.2.2.1,RMON-MIB::etherHistoryEntry,,not-accessible,etherHistoryIndex:etherHistorySampleIndex,current,,An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the etherHistoryPkts object might be named etherHistoryPkts.2.89
.1.3.6.1.2.1.16.2.2.1.1,RMON-MIB::etherHistoryIndex,Integer32,read-only,,current,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.2.1.2,RMON-MIB::etherHistorySampleIndex,Integer32,read-only,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.2.1.3,RMON-MIB::etherHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.2.1.4,RMON-MIB::etherHistoryDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.2.1.5,RMON-MIB::etherHistoryOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.2.1.6,RMON-MIB::etherHistoryPkts,Counter32,read-only,,current,,The number of packets (including bad packets) received during this sampling interval.
.1.3.6.1.2.1.16.2.2.1.7,RMON-MIB::etherHistoryBroadcastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.8,RMON-MIB::etherHistoryMulticastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.9,RMON-MIB::etherHistoryCRCAlignErrors,Counter32,read-only,,current,,The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.2.2.1.10,RMON-MIB::etherHistoryUndersizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.11,RMON-MIB::etherHistoryOversizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.12,RMON-MIB::etherHistoryFragments,Counter32,read-only,,current,,The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherHistoryFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.2.2.1.13,RMON-MIB::etherHistoryJabbers,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.2.2.1.14,RMON-MIB::etherHistoryCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.2.2.1.15,RMON-MIB::etherHistoryUtilization,Integer32,read-only,,current,,The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
.1.3.6.1.2.1.16.2.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.2.3.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryEntry,,not-accessible,tokenRingMLHistoryIndex:tokenRingMLHistorySampleIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.3.1.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.3.1.2,TOKEN-RING-RMON-MIB::tokenRingMLHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular Mac-Layer sample this entry represents among all Mac-Layer samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.3.1.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.3.1.4,TOKEN-RING-RMON-MIB::tokenRingMLHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.3.1.5,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network during this sampling interval (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.3.1.6,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding those that were not good frames) received during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.7,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring entered the ring purge state from normal ring state during this sampling interval. The ring purge state that comes from the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.8,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgePkts,Counter32,read-only,,mandatory,,The total number of Ring Purge MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.9,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) during this sampling interval. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.2.3.1.10,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconTime,INTEGER,read-only,,mandatory,,The amount of time that the ring has been in the beaconing state during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.11,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.12,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state during this sampling interval. The claim token state that comes from the beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.13,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.14,TOKEN-RING-RMON-MIB::tokenRingMLHistoryNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.15,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.16,TOKEN-RING-RMON-MIB::tokenRingMLHistoryInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.17,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.18,TOKEN-RING-RMON-MIB::tokenRingMLHistoryACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.19,TOKEN-RING-RMON-MIB::tokenRingMLHistoryAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.20,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.21,TOKEN-RING-RMON-MIB::tokenRingMLHistoryCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.22,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.23,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.24,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.25,TOKEN-RING-RMON-MIB::tokenRingMLHistorySoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.26,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.27,TOKEN-RING-RMON-MIB::tokenRingMLHistoryActiveStations,INTEGER,read-only,,mandatory,,The maximum number of active stations on the ring detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.2.4.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryEntry,,not-accessible,tokenRingPHistoryIndex:tokenRingPHistorySampleIndex,mandatory,,A collection of promiscuous statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.4.1.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.4.1.2,TOKEN-RING-RMON-MIB::tokenRingPHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.4.1.3,TOKEN-RING-RMON-MIB::tokenRingPHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.4.1.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.4.1.5,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.6,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.7,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.2.4.1.8,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.2.4.1.9,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.10,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.11,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.12,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.13,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.14,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.15,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.16,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.17,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.18,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.5,RMON2-MIB::historyControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1,RMON2-MIB::historyControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1.1,RMON2-MIB::historyControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.3,RMON-MIB::alarm,,,,,,
.1.3.6.1.2.1.16.3.1,RMON-MIB::alarmTable,,not-accessible,,current,,A list of alarm entries.
.1.3.6.1.2.1.16.3.1.1,RMON-MIB::alarmEntry,,not-accessible,alarmIndex,current,,A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
.1.3.6.1.2.1.16.3.1.1.1,RMON-MIB::alarmIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
.1.3.6.1.2.1.16.3.1.1.2,RMON-MIB::alarmInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.3,RMON-MIB::alarmVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.4,RMON-MIB::alarmSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.5,RMON-MIB::alarmValue,Integer32,read-only,,current,,The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
.1.3.6.1.2.1.16.3.1.1.6,RMON-MIB::alarmStartupAlarm,INTEGER,read-create,,current,risingAlarm(1):fallingAlarm(2):risingOrFallingAlarm(3),The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.7,RMON-MIB::alarmRisingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.8,RMON-MIB::alarmFallingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.9,RMON-MIB::alarmRisingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.10,RMON-MIB::alarmFallingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.11,RMON-MIB::alarmOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.3.1.1.12,RMON-MIB::alarmStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this alarm entry.
.1.3.6.1.2.1.16.4,RMON-MIB::hosts,,,,,,
.1.3.6.1.2.1.16.4.1,RMON-MIB::hostControlTable,,not-accessible,,current,,A list of host table control entries.
.1.3.6.1.2.1.16.4.1.1,RMON-MIB::hostControlEntry,,not-accessible,hostControlIndex,current,,A list of parameters that set up the discovery of hosts on a particular interface and the collection of statistics about these hosts. For example, an instance of the hostControlTableSize object might be named hostControlTableSize.1
.1.3.6.1.2.1.16.4.1.1.1,RMON-MIB::hostControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostControl table. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the hostTable and the hostTimeTable on behalf of this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.2,RMON-MIB::hostControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for this instance of the host function. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated hostControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.4.1.1.3,RMON-MIB::hostControlTableSize,Integer32,read-only,,current,,The number of hostEntries in the hostTable and the hostTimeTable associated with this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.4,RMON-MIB::hostControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the hostTable associated with this hostControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.4.1.1.5,RMON-MIB::hostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.4.1.1.6,RMON-MIB::hostControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostControl entry. If this object is not equal to valid(1), all associated entries in the hostTable, hostTimeTable, and the hostTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.4.2,RMON-MIB::hostTable,,not-accessible,,current,,A list of host entries.
.1.3.6.1.2.1.16.4.2.1,RMON-MIB::hostEntry,,not-accessible,hostIndex:hostAddress,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. For example, an instance of the hostOutBroadcastPkts object might be named hostOutBroadcastPkts.1.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.4.2.1.1,RMON-MIB::hostAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.2.1.2,RMON-MIB::hostCreationOrder,Integer32,read-only,,current,,An index that defines the relative ordering of the creation time of hosts captured for a particular hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. It is important to note that the order for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTable. By observing this variable, the management station may detect the circumstances where a previous association between a value of hostCreationOrder and a hostEntry may no longer hold.
.1.3.6.1.2.1.16.4.2.1.3,RMON-MIB::hostIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.2.1.4,RMON-MIB::hostInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.5,RMON-MIB::hostOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.6,RMON-MIB::hostInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.7,RMON-MIB::hostOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.8,RMON-MIB::hostOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.9,RMON-MIB::hostOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.10,RMON-MIB::hostOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.3,RMON-MIB::hostTimeTable,,not-accessible,,current,,A list of time-ordered host table entries.
.1.3.6.1.2.1.16.4.3.1,RMON-MIB::hostTimeEntry,,not-accessible,hostTimeIndex:hostTimeCreationOrder,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. This collection includes the relative ordering of the creation time of this object. For example, an instance of the hostTimeOutBroadcastPkts object might be named hostTimeOutBroadcastPkts.1.687
.1.3.6.1.2.1.16.4.3.1.1,RMON-MIB::hostTimeAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.3.1.2,RMON-MIB::hostTimeCreationOrder,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. Thus the management station has the ability to learn of new entries added to this table without downloading the entire table. It is important to note that the index for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTimeTable. By observing this variable, the management station may detect the circumstances where a download of the table may have missed entries, and where a previous association between a value of hostTimeCreationOrder and a hostTimeEntry may no longer hold.
.1.3.6.1.2.1.16.4.3.1.3,RMON-MIB::hostTimeIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.3.1.4,RMON-MIB::hostTimeInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.5,RMON-MIB::hostTimeOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.6,RMON-MIB::hostTimeInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.7,RMON-MIB::hostTimeOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.8,RMON-MIB::hostTimeOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.9,RMON-MIB::hostTimeOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.10,RMON-MIB::hostTimeOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTimeTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.4,RMON2-MIB::hostControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1,RMON2-MIB::hostControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1.1,RMON2-MIB::hostControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.4.4.1.2,RMON2-MIB::hostControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.5,RMON-MIB::hostTopN,,,,,,
.1.3.6.1.2.1.16.5.1,RMON-MIB::hostTopNControlTable,,not-accessible,,current,,A list of top N host control entries.
.1.3.6.1.2.1.16.5.1.1,RMON-MIB::hostTopNControlEntry,,not-accessible,hostTopNControlIndex,current,,A set of parameters that control the creation of a report of the top N hosts according to several metrics. For example, an instance of the hostTopNDuration object might be named hostTopNDuration.3
.1.3.6.1.2.1.16.5.1.1.1,RMON-MIB::hostTopNControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopNControl table. Each such entry defines one top N report prepared for one interface.
.1.3.6.1.2.1.16.5.1.1.2,RMON-MIB::hostTopNHostIndex,Integer32,read-create,,current,,The host table for which a top N report will be prepared on behalf of this entry. The host table identified by a particular value of this index is associated with the same host table as identified by the same value of hostIndex. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.3,RMON-MIB::hostTopNRateBase,INTEGER,read-create,,current,hostTopNInPkts(1):hostTopNOutPkts(2):hostTopNInOctets(3):hostTopNOutOctets(4):hostTopNOutErrors(5):hostTopNOutBroadcastPkts(6):hostTopNOutMulticastPkts(7),The variable for each host that the hostTopNRate variable is based upon. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.4,RMON-MIB::hostTopNTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval.
.1.3.6.1.2.1.16.5.1.1.5,RMON-MIB::hostTopNDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval, or if this report is currently being collected, the number of seconds that this report is being collected during this sampling interval. When the associated hostTopNTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the hostTopNTimeRemaining is set. This value shall be zero if no reports have been requested for this hostTopNControlEntry.
.1.3.6.1.2.1.16.5.1.1.6,RMON-MIB::hostTopNRequestedSize,Integer32,read-create,,current,,The maximum number of hosts requested for the top N table. When this object is created or modified, the probe should set hostTopNGrantedSize as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.5.1.1.7,RMON-MIB::hostTopNGrantedSize,Integer32,read-only,,current,,The maximum number of hosts in the top N table. When the associated hostTopNRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe must not lower this value except as a result of a set to the associated hostTopNRequestedSize object. Hosts with the highest value of hostTopNRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more hosts.
.1.3.6.1.2.1.16.5.1.1.8,RMON-MIB::hostTopNStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated hostTopNTimeRemaining object was modified to start the requested report.
.1.3.6.1.2.1.16.5.1.1.9,RMON-MIB::hostTopNOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.5.1.1.10,RMON-MIB::hostTopNStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostTopNControl entry. If this object is not equal to valid(1), all associated hostTopNEntries shall be deleted by the agent.
.1.3.6.1.2.1.16.5.2,RMON-MIB::hostTopNTable,,not-accessible,,current,,A list of top N host entries.
.1.3.6.1.2.1.16.5.2.1,RMON-MIB::hostTopNEntry,,not-accessible,hostTopNReport:hostTopNIndex,current,,A set of statistics for a host that is part of a top N report. For example, an instance of the hostTopNRate object might be named hostTopNRate.3.10
.1.3.6.1.2.1.16.5.2.1.1,RMON-MIB::hostTopNReport,Integer32,read-only,,current,,This object identifies the top N report of which this entry is a part. The set of hosts identified by a particular value of this object is part of the same report as identified by the same value of the hostTopNControlIndex object.
.1.3.6.1.2.1.16.5.2.1.2,RMON-MIB::hostTopNIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopN table among those in the same report. This index is between 1 and N, where N is the number of entries in this table. Increasing values of hostTopNIndex shall be assigned to entries with decreasing values of hostTopNRate until index N is assigned to the entry with the lowest value of hostTopNRate or there are no more hostTopNEntries.
.1.3.6.1.2.1.16.5.2.1.3,RMON-MIB::hostTopNAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.5.2.1.4,RMON-MIB::hostTopNRate,Integer32,read-only,,current,,The amount of change in the selected variable during this sampling interval. The selected variable is this host's instance of the object selected by hostTopNRateBase.
.1.3.6.1.2.1.16.6,RMON-MIB::matrix,,,,,,
.1.3.6.1.2.1.16.6.1,RMON-MIB::matrixControlTable,,not-accessible,,current,,A list of information entries for the traffic matrix on each interface.
.1.3.6.1.2.1.16.6.1.1,RMON-MIB::matrixControlEntry,,not-accessible,matrixControlIndex,current,,Information about a traffic matrix on a particular interface. For example, an instance of the matrixControlLastDeleteTime object might be named matrixControlLastDeleteTime.1
.1.3.6.1.2.1.16.6.1.1.1,RMON-MIB::matrixControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the matrixControl table. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the matrixSDTable and the matrixDSTable on behalf of this matrixControlEntry.
.1.3.6.1.2.1.16.6.1.1.2,RMON-MIB::matrixControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data from which this entry creates a traffic matrix. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated matrixControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.6.1.1.3,RMON-MIB::matrixControlTableSize,Integer32,read-only,,current,,The number of matrixSDEntries in the matrixSDTable for this interface. This must also be the value of the number of entries in the matrixDSTable for this interface.
.1.3.6.1.2.1.16.6.1.1.4,RMON-MIB::matrixControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the matrixSDTable or matrixDSTable associated with this matrixControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.6.1.1.5,RMON-MIB::matrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.6.1.1.6,RMON-MIB::matrixControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this matrixControl entry. If this object is not equal to valid(1), all associated entries in the matrixSDTable and the matrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.6.2,RMON-MIB::matrixSDTable,,not-accessible,,current,,A list of traffic matrix entries indexed by source and destination MAC address.
.1.3.6.1.2.1.16.6.2.1,RMON-MIB::matrixSDEntry,,not-accessible,matrixSDIndex:matrixSDSourceAddress:matrixSDDestAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113
.1.3.6.1.2.1.16.6.2.1.1,RMON-MIB::matrixSDSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.2.1.2,RMON-MIB::matrixSDDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.2.1.3,RMON-MIB::matrixSDIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.2.1.4,RMON-MIB::matrixSDPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.2.1.5,RMON-MIB::matrixSDOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.2.1.6,RMON-MIB::matrixSDErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3,RMON-MIB::matrixDSTable,,not-accessible,,current,,A list of traffic matrix entries indexed by destination and source MAC address.
.1.3.6.1.2.1.16.6.3.1,RMON-MIB::matrixDSEntry,,not-accessible,matrixDSIndex:matrixDSDestAddress:matrixDSSourceAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.6.3.1.1,RMON-MIB::matrixDSSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.3.1.2,RMON-MIB::matrixDSDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.3.1.3,RMON-MIB::matrixDSIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.3.1.4,RMON-MIB::matrixDSPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.3.1.5,RMON-MIB::matrixDSOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3.1.6,RMON-MIB::matrixDSErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.4,RMON2-MIB::matrixControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1,RMON2-MIB::matrixControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1.1,RMON2-MIB::matrixControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.6.4.1.2,RMON2-MIB::matrixControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7,RMON-MIB::filter,,,,,,
.1.3.6.1.2.1.16.7.1,RMON-MIB::filterTable,,not-accessible,,current,,A list of packet filter entries.
.1.3.6.1.2.1.16.7.1.1,RMON-MIB::filterEntry,,not-accessible,filterIndex,current,,A set of parameters for a packet filter applied on a particular interface. As an example, an instance of the filterPktData object might be named filterPktData.12
.1.3.6.1.2.1.16.7.1.1.1,RMON-MIB::filterIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to every packet received on an interface.
.1.3.6.1.2.1.16.7.1.1.2,RMON-MIB::filterChannelIndex,Integer32,read-create,,current,,This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object are associated with the same channel as identified by the same value of the channelIndex object.
.1.3.6.1.2.1.16.7.1.1.3,RMON-MIB::filterPktDataOffset,Integer32,read-create,,current,,The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the point in the physical layer packet after the framing bits, if any. For example, in an Ethernet frame, this point is at the beginning of the destination MAC address. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.4,RMON-MIB::filterPktData,OCTET,read-create,,current,,The data that is to be matched with the input packet. For each packet received, this filter and the accompanying filterPktDataMask and filterPktDataNotMask will be adjusted for the offset. The only bits relevant to this match algorithm are those that have the corresponding filterPktDataMask bit equal to one. The following three rules are then applied to every packet: (1) If the packet is too short and does not have data corresponding to part of the filterPktData, the packet will fail this data match. (2) For each relevant bit from the packet with the corresponding filterPktDataNotMask bit set to zero, if the bit from the packet is not equal to the corresponding bit from the filterPktData, then the packet will fail this data match. (3) If for every relevant bit from the packet with the corresponding filterPktDataNotMask bit set to one, the bit from the packet is equal to the corresponding bit from the filterPktData, then the packet will fail this data match. Any packets that have not failed any of the three matches above have passed this data match. In particular, a zero length filter will match any packet. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.5,RMON-MIB::filterPktDataMask,OCTET,read-create,,current,,The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the match algorithm. The offset is applied to filterPktDataMask in the same way it is applied to the filter. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.6,RMON-MIB::filterPktDataNotMask,OCTET,read-create,,current,,The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the received packet that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktData object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet that correspond to bits set in this mask must be different to its corresponding bit in the filterPktData object. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.7,RMON-MIB::filterPktStatus,Integer32,read-create,,current,,The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the corresponding filterPktStatusMask bit equal to one. The following two rules are then applied to every packet: (1) For each relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to zero, if the bit from the packet status is not equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. (2) If for every relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to one, the bit from the packet status is equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. Any packets that have not failed either of the two matches above have passed this status match. In particular, a zero length status filter will match any packet's status. The value of the packet status is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors and the bits that represent them are dependent on the media type of the interface that this channel is receiving packets from. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined. For the purposes of this status matching algorithm, if the packet status is longer than this filterPktStatus object, this object is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.8,RMON-MIB::filterPktStatusMask,Integer32,read-create,,current,,The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the status match algorithm. For the purposes of the matching algorithm, if the associated filterPktStatus object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the size of the filterPktStatus. In addition, if a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.9,RMON-MIB::filterPktStatusNotMask,Integer32,read-create,,current,,The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.10,RMON-MIB::filterOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.1.1.11,RMON-MIB::filterStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this filter entry.
.1.3.6.1.2.1.16.7.2,RMON-MIB::channelTable,,not-accessible,,current,,A list of packet channel entries.
.1.3.6.1.2.1.16.7.2.1,RMON-MIB::channelEntry,,not-accessible,channelIndex,current,,A set of parameters for a packet channel applied on a particular interface. As an example, an instance of the channelMatches object might be named channelMatches.3
.1.3.6.1.2.1.16.7.2.1.1,RMON-MIB::channelIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event stream. It is suggested that before creating a channel, an application should scan all instances of the filterChannelIndex object to make sure that there are no pre-existing filters that would be inadvertently be linked to the channel.
.1.3.6.1.2.1.16.7.2.1.2,RMON-MIB::channelIfIndex,Integer32,read-create,,current,,The value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.3,RMON-MIB::channelAcceptType,INTEGER,read-create,,current,acceptMatched(1):acceptFailed(2),This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. In particular, a channel with no associated filters will match no packets if set to acceptMatched(1) case and will match all packets in the acceptFailed(2) case. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.4,RMON-MIB::channelDataControl,INTEGER,read-create,,current,on(1):off(2),This object controls the flow of data through this channel. If this object is on(1), data, status and events flow through this channel. If this object is off(2), data, status and events will not flow through this channel.
.1.3.6.1.2.1.16.7.2.1.5,RMON-MIB::channelTurnOnEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from off to on when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOnEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.6,RMON-MIB::channelTurnOffEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from on to off when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOffEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.7,RMON-MIB::channelEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to be generated when the associated channelDataControl is on and a packet is matched. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.8,RMON-MIB::channelEventStatus,INTEGER,read-create,,current,eventReady(1):eventFired(2):eventAlwaysReady(3),The event status of this channel. If this channel is configured to generate events when packets are matched, a means of controlling the flow of those events is often needed. When this object is equal to eventReady(1), a single event may be generated, after which this object will be set by the probe to eventFired(2). While in the eventFired(2) state, no events will be generated until the object is modified to eventReady(1) (or eventAlwaysReady(3)). The management station can thus easily respond to a notification of an event by re-enabling this object. If the management station wishes to disable this flow control and allow events to be generated at will, this object may be set to eventAlwaysReady(3). Disabling the flow control is discouraged as it can result in high network traffic or other performance problems.
.1.3.6.1.2.1.16.7.2.1.9,RMON-MIB::channelMatches,Counter32,read-only,,current,,The number of times this channel has matched a packet. Note that this object is updated even when channelDataControl is set to off.
.1.3.6.1.2.1.16.7.2.1.10,RMON-MIB::channelDescription,OCTET,read-create,,current,,A comment describing this channel.
.1.3.6.1.2.1.16.7.2.1.11,RMON-MIB::channelOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.2.1.12,RMON-MIB::channelStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this channel entry.
.1.3.6.1.2.1.16.7.3,RMON2-MIB::channel2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1,RMON2-MIB::channel2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1.1,RMON2-MIB::channelDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.7.3.1.2,RMON2-MIB::channelCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7.4,RMON2-MIB::filter2Table,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1,RMON2-MIB::filter2Entry,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1.1,RMON2-MIB::filterProtocolDirDataLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with performs the following operations on every packet: 1) If the packet doesn't match the protocol directory entry identified by this object, discard the packet and exit (i.e., discard the packet if it is not of the identified protocol). 2) If the associated filterProtocolDirLocalIndex is non-zero and the packet doesn't match the protocol directory entry identified by that object, discard the packet and exit. 3) If the packet matches, perform the regular filter algorithm as if the beginning of this named protocol is the beginning of the packet, potentially applying the filterOffset value to move further into the packet.
.1.3.6.1.2.1.16.7.4.1.2,RMON2-MIB::filterProtocolDirLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with will discard the packet if the packet doesn't match this protocol directory entry.
.1.3.6.1.2.1.16.8,RMON-MIB::capture,,,,,,
.1.3.6.1.2.1.16.8.1,RMON-MIB::bufferControlTable,,not-accessible,,current,,A list of buffers control entries.
.1.3.6.1.2.1.16.8.1.1,RMON-MIB::bufferControlEntry,,not-accessible,bufferControlIndex,current,,A set of parameters that control the collection of a stream of packets that have matched filters. As an example, an instance of the bufferControlCaptureSliceSize object might be named bufferControlCaptureSliceSize.3
.1.3.6.1.2.1.16.8.1.1.1,RMON-MIB::bufferControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the bufferControl table. The value of this index shall never be zero. Each such entry defines one set of packets that is captured and controlled by one or more filters.
.1.3.6.1.2.1.16.8.1.1.2,RMON-MIB::bufferControlChannelIndex,Integer32,read-create,,current,,An index that identifies the channel that is the source of packets for this bufferControl table. The channel identified by a particular value of this index is the same as identified by the same value of the channelIndex object. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.3,RMON-MIB::bufferControlFullStatus,INTEGER,read-only,,current,spaceAvailable(1):full(2),This object shows whether the buffer has room to accept new packets or if it is full. If the status is spaceAvailable(1), the buffer is accepting new packets normally. If the status is full(2) and the associated bufferControlFullAction object is wrapWhenFull, the buffer is accepting new packets by deleting enough of the oldest packets to make room for new ones as they arrive. Otherwise, if the status is full(2) and the bufferControlFullAction object is lockWhenFull, then the buffer has stopped collecting packets. When this object is set to full(2) the probe must not later set it to spaceAvailable(1) except in the case of a significant gain in resources such as an increase of bufferControlOctetsGranted. In particular, the wrap-mode action of deleting old packets to make room for newly arrived packets must not affect the value of this object.
.1.3.6.1.2.1.16.8.1.1.4,RMON-MIB::bufferControlFullAction,INTEGER,read-create,,current,lockWhenFull(1):wrapWhenFull(2),Controls the action of the buffer when it reaches the full status. When in the lockWhenFull(1) state and a packet is added to the buffer that fills the buffer, the bufferControlFullStatus will be set to full(2) and this buffer will stop capturing packets.
.1.3.6.1.2.1.16.8.1.1.5,RMON-MIB::bufferControlCaptureSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet that will be saved in this capture buffer. For example, if a 1500 octet packet is received by the probe and this object is set to 500, then only 500 octets of the packet will be stored in the associated capture buffer. If this variable is set to 0, the capture buffer will save as many octets as is possible. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.6,RMON-MIB::bufferControlDownloadSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer, the associated bufferControlDownloadOffset is 0, and this object is set to 100, then the captureBufferPacket object that contains the packet will contain only the first 100 octets of the packet. A prudent manager will take into account possible interoperability or fragmentation problems that may occur if the download slice size is set too large. In particular, conformant SNMP implementations are not required to accept messages whose length exceeds 484 octets, although they are encouraged to support larger datagrams whenever feasible.
.1.3.6.1.2.1.16.8.1.1.7,RMON-MIB::bufferControlDownloadOffset,Integer32,read-create,,current,,The offset of the first octet of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer and this object is set to 100, then the captureBufferPacket object that contains the packet will contain bytes starting 100 octets into the packet.
.1.3.6.1.2.1.16.8.1.1.8,RMON-MIB::bufferControlMaxOctetsRequested,Integer32,read-create,,current,,The requested maximum number of octets to be saved in this captureBuffer, including any implementation-specific overhead. If this variable is set to -1, the capture buffer will save as many octets as is possible. When this object is created or modified, the probe should set bufferControlMaxOctetsGranted as closely to this object as is possible for the particular probe implementation and available resources. However, if the object has the special value of -1, the probe must set bufferControlMaxOctetsGranted to -1.
.1.3.6.1.2.1.16.8.1.1.9,RMON-MIB::bufferControlMaxOctetsGranted,Integer32,read-only,,current,,The maximum number of octets that can be saved in this captureBuffer, including overhead. If this variable is -1, the capture buffer will save as many octets as possible. When the bufferControlMaxOctetsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. However, if the request object has the special value of -1, the probe must set this object to -1. The probe must not lower this value except as a result of a modification to the associated bufferControlMaxOctetsRequested object. When this maximum number of octets is reached and a new packet is to be added to this capture buffer and the corresponding bufferControlFullAction is set to wrapWhenFull(2), enough of the oldest packets associated with this capture buffer shall be deleted by the agent so that the new packet can be added. If the corresponding bufferControlFullAction is set to lockWhenFull(1), the new packet shall be discarded. In either case, the probe must set bufferControlFullStatus to full(2). When the value of this object changes to a value less than the current value, entries are deleted from the captureBufferTable associated with this bufferControlEntry. Enough of the oldest of these captureBufferEntries shall be deleted by the agent so that the number of octets used remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated captureBufferEntries may be allowed to grow.
.1.3.6.1.2.1.16.8.1.1.10,RMON-MIB::bufferControlCapturedPackets,Integer32,read-only,,current,,The number of packets currently in this captureBuffer.
.1.3.6.1.2.1.16.8.1.1.11,RMON-MIB::bufferControlTurnOnTime,TimeTicks,read-only,,current,,The value of sysUpTime when this capture buffer was first turned on.
.1.3.6.1.2.1.16.8.1.1.12,RMON-MIB::bufferControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.8.1.1.13,RMON-MIB::bufferControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this buffer Control Entry.
.1.3.6.1.2.1.16.8.2,RMON-MIB::captureBufferTable,,not-accessible,,current,,A list of packets captured off of a channel.
.1.3.6.1.2.1.16.8.2.1,RMON-MIB::captureBufferEntry,,not-accessible,captureBufferControlIndex:captureBufferIndex,current,,A packet captured off of an attached network. As an example, an instance of the captureBufferPacketData object might be named captureBufferPacketData.3.1783
.1.3.6.1.2.1.16.8.2.1.1,RMON-MIB::captureBufferControlIndex,Integer32,read-only,,current,,The index of the bufferControlEntry with which this packet is associated.
.1.3.6.1.2.1.16.8.2.1.2,RMON-MIB::captureBufferIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the captureBuffer table associated with a particular bufferControlEntry. This index will start at 1 and increase by one for each new packet added with the same captureBufferControlIndex. Should this value reach 2147483647, the next packet added with the same captureBufferControlIndex shall cause this value to wrap around to 1.
.1.3.6.1.2.1.16.8.2.1.3,RMON-MIB::captureBufferPacketID,Integer32,read-only,,current,,An index that describes the order of packets that are received on a particular interface. The packetID of a packet captured on an interface is defined to be greater than the packetID's of all packets captured previously on the same interface. As the captureBufferPacketID object has a maximum positive value of 2^31 - 1, any captureBufferPacketID object shall have the value of the associated packet's packetID mod 2^31.
.1.3.6.1.2.1.16.8.2.1.4,RMON-MIB::captureBufferPacketData,OCTET,read-only,,current,,The data inside the packet, starting at the beginning of the packet plus any offset specified in the associated bufferControlDownloadOffset, including any link level headers. The length of the data in this object is the minimum of the length of the captured packet minus the offset, the length of the associated bufferControlCaptureSliceSize minus the offset, and the associated bufferControlDownloadSliceSize. If this minimum is less than zero, this object shall have a length of zero.
.1.3.6.1.2.1.16.8.2.1.5,RMON-MIB::captureBufferPacketLength,Integer32,read-only,,current,,The actual length (off the wire) of the packet stored in this entry, including FCS octets.
.1.3.6.1.2.1.16.8.2.1.6,RMON-MIB::captureBufferPacketTime,Integer32,read-only,,current,,The number of milliseconds that had passed since this capture buffer was first turned on when this packet was captured.
.1.3.6.1.2.1.16.8.2.1.7,RMON-MIB::captureBufferPacketStatus,Integer32,read-only,,current,,A value which indicates the error status of this packet. The value of this object is defined in the same way as filterPktStatus. The value is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error 3 First packet in this capture buffer after it was detected that some packets were not processed correctly. 4 Packet's order in buffer is only approximate (May only be set for packets sent from the probe) For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined.
.1.3.6.1.2.1.16.9,RMON-MIB::event,,,,,,
.1.3.6.1.2.1.16.9.1,RMON-MIB::eventTable,,not-accessible,,current,,A list of events to be generated.
.1.3.6.1.2.1.16.9.1.1,RMON-MIB::eventEntry,,not-accessible,eventIndex,current,,A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be named eventLastTimeSent.6
.1.3.6.1.2.1.16.9.1.1.1,RMON-MIB::eventIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
.1.3.6.1.2.1.16.9.1.1.2,RMON-MIB::eventDescription,OCTET,read-create,,current,,A comment describing this event entry.
.1.3.6.1.2.1.16.9.1.1.3,RMON-MIB::eventType,INTEGER,read-create,,current,none(1):log(2):snmptrap(3):logandtrap(4),The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.
.1.3.6.1.2.1.16.9.1.1.4,RMON-MIB::eventCommunity,OCTET,read-create,,current,,If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.
.1.3.6.1.2.1.16.9.1.1.5,RMON-MIB::eventLastTimeSent,TimeTicks,read-only,,current,,The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
.1.3.6.1.2.1.16.9.1.1.6,RMON-MIB::eventOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
.1.3.6.1.2.1.16.9.1.1.7,RMON-MIB::eventStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
.1.3.6.1.2.1.16.9.2,RMON-MIB::logTable,,not-accessible,,current,,A list of events that have been logged.
.1.3.6.1.2.1.16.9.2.1,RMON-MIB::logEntry,,not-accessible,logEventIndex:logIndex,current,,A set of data describing an event that has been logged. For example, an instance of the logDescription object might be named logDescription.6.47
.1.3.6.1.2.1.16.9.2.1.1,RMON-MIB::logEventIndex,Integer32,read-only,,current,,The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.
.1.3.6.1.2.1.16.9.2.1.2,RMON-MIB::logIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur.
.1.3.6.1.2.1.16.9.2.1.3,RMON-MIB::logTime,TimeTicks,read-only,,current,,The value of sysUpTime when this log entry was created.
.1.3.6.1.2.1.16.9.2.1.4,RMON-MIB::logDescription,OCTET,read-only,,current,,An implementation dependent description of the event that activated this log entry.
.1.3.6.1.2.1.16.10,TOKEN-RING-RMON-MIB::tokenRing,,,,,,
.1.3.6.1.2.1.16.10.1,TOKEN-RING-RMON-MIB::ringStationControlTable,,not-accessible,,mandatory,,A list of ringStation table control entries.
.1.3.6.1.2.1.16.10.1.1,TOKEN-RING-RMON-MIB::ringStationControlEntry,,not-accessible,ringStationControlIfIndex,mandatory,,A list of parameters that set up the discovery of stations on a particular interface and the collection of statistics about these stations.
.1.3.6.1.2.1.16.10.1.1.1,TOKEN-RING-RMON-MIB::ringStationControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device from which ringStation data is collected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB- II [3].
.1.3.6.1.2.1.16.10.1.1.2,TOKEN-RING-RMON-MIB::ringStationControlTableSize,INTEGER,read-only,,mandatory,,The number of ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.3,TOKEN-RING-RMON-MIB::ringStationControlActiveStations,INTEGER,read-only,,mandatory,,The number of active ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.4,TOKEN-RING-RMON-MIB::ringStationControlRingState,INTEGER,read-only,,mandatory,normalOperation(1):ringPurgeState(2):claimTokenState(3):beaconFrameStreamingState(4):beaconBitStreamingState(5):beaconRingSignalLossState(6):beaconSetRecoveryModeState(7),The current status of this ring.
.1.3.6.1.2.1.16.10.1.1.5,TOKEN-RING-RMON-MIB::ringStationControlBeaconSender,OCTET,read-only,,mandatory,,The address of the sender of the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.6,TOKEN-RING-RMON-MIB::ringStationControlBeaconNAUN,OCTET,read-only,,mandatory,,The address of the NAUN in the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.7,TOKEN-RING-RMON-MIB::ringStationControlActiveMonitor,OCTET,read-only,,mandatory,,The address of the Active Monitor on this segment. If this address is unknown, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.8,TOKEN-RING-RMON-MIB::ringStationControlOrderChanges,Counter32,read-only,,mandatory,,The number of add and delete events in the ringStationOrderTable optionally associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.9,TOKEN-RING-RMON-MIB::ringStationControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.1.1.10,TOKEN-RING-RMON-MIB::ringStationControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this ringStationControl entry. If this object is not equal to valid(1), all associated entries in the ringStationTable shall be deleted by the agent.
.1.3.6.1.2.1.16.10.2,TOKEN-RING-RMON-MIB::ringStationTable,,not-accessible,,mandatory,,A list of ring station entries. An entry will exist for each station that is now or has previously been detected as physically present on this ring.
.1.3.6.1.2.1.16.10.2.1,TOKEN-RING-RMON-MIB::ringStationEntry,,not-accessible,ringStationIfIndex:ringStationMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this device.
.1.3.6.1.2.1.16.10.2.1.1,TOKEN-RING-RMON-MIB::ringStationIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.2.1.2,TOKEN-RING-RMON-MIB::ringStationMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.2.1.3,TOKEN-RING-RMON-MIB::ringStationLastNAUN,OCTET,read-only,,mandatory,,The physical address of last known NAUN of this station.
.1.3.6.1.2.1.16.10.2.1.4,TOKEN-RING-RMON-MIB::ringStationStationStatus,INTEGER,read-only,,mandatory,active(1):inactive(2):forcedRemoval(3),The status of this station on the ring.
.1.3.6.1.2.1.16.10.2.1.5,TOKEN-RING-RMON-MIB::ringStationLastEnterTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this station last entered the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.6,TOKEN-RING-RMON-MIB::ringStationLastExitTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the probe detected that this station last exited the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.7,TOKEN-RING-RMON-MIB::ringStationDuplicateAddresses,Counter32,read-only,,mandatory,,The number of times this station experienced a duplicate address error.
.1.3.6.1.2.1.16.10.2.1.8,TOKEN-RING-RMON-MIB::ringStationInLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.9,TOKEN-RING-RMON-MIB::ringStationOutLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.10,TOKEN-RING-RMON-MIB::ringStationInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.11,TOKEN-RING-RMON-MIB::ringStationInBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.12,TOKEN-RING-RMON-MIB::ringStationOutBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.13,TOKEN-RING-RMON-MIB::ringStationACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.14,TOKEN-RING-RMON-MIB::ringStationAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.15,TOKEN-RING-RMON-MIB::ringStationLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.16,TOKEN-RING-RMON-MIB::ringStationCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.17,TOKEN-RING-RMON-MIB::ringStationFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.18,TOKEN-RING-RMON-MIB::ringStationFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.19,TOKEN-RING-RMON-MIB::ringStationTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported by this station in error reporting frames detected by the probe.
.1.3.6.1.2.1.16.10.2.1.20,TOKEN-RING-RMON-MIB::ringStationInBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames sent by this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.21,TOKEN-RING-RMON-MIB::ringStationOutBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames detected by the probe that name this station as the NAUN.
.1.3.6.1.2.1.16.10.2.1.22,TOKEN-RING-RMON-MIB::ringStationInsertions,Counter32,read-only,,mandatory,,The number of times the probe detected this station inserting onto the ring.
.1.3.6.1.2.1.16.10.3,TOKEN-RING-RMON-MIB::ringStationOrderTable,,not-accessible,,mandatory,,A list of ring station entries for stations in the ring poll, ordered by their ring-order.
.1.3.6.1.2.1.16.10.3.1,TOKEN-RING-RMON-MIB::ringStationOrderEntry,,not-accessible,ringStationOrderIfIndex:ringStationOrderOrderIndex,mandatory,,A collection of statistics for a particular station that is active on a ring monitored by this device. This table will contain information for every interface that has a ringStationControlStatus equal to valid.
.1.3.6.1.2.1.16.10.3.1.1,TOKEN-RING-RMON-MIB::ringStationOrderIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.3.1.2,TOKEN-RING-RMON-MIB::ringStationOrderOrderIndex,INTEGER,read-only,,mandatory,,This index denotes the location of this station with respect to other stations on the ring. This index is one more than the number of hops downstream that this station is from the rmon probe. The rmon probe itself gets the value one.
.1.3.6.1.2.1.16.10.3.1.3,TOKEN-RING-RMON-MIB::ringStationOrderMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4,TOKEN-RING-RMON-MIB::ringStationConfigControlTable,,not-accessible,,mandatory,,A list of ring station configuration control entries.
.1.3.6.1.2.1.16.10.4.1,TOKEN-RING-RMON-MIB::ringStationConfigControlEntry,,not-accessible,ringStationConfigControlIfIndex:ringStationConfigControlMacAddress,mandatory,,This entry controls active management of stations by the probe. One entry exists in this table for each active station in the ringStationTable.
.1.3.6.1.2.1.16.10.4.1.1,TOKEN-RING-RMON-MIB::ringStationConfigControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.4.1.2,TOKEN-RING-RMON-MIB::ringStationConfigControlMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4.1.3,TOKEN-RING-RMON-MIB::ringStationConfigControlRemove,INTEGER,read-write,,mandatory,stable(1):removing(2),Setting this object to `removing(2)' causes a Remove Station MAC frame to be sent. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.4.1.4,TOKEN-RING-RMON-MIB::ringStationConfigControlUpdateStats,INTEGER,read-write,,mandatory,stable(1):updating(2),Setting this object to `updating(2)' causes the configuration information associate with this entry to be updated. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.5,TOKEN-RING-RMON-MIB::ringStationConfigTable,,not-accessible,,mandatory,,A list of configuration entries for stations on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1,TOKEN-RING-RMON-MIB::ringStationConfigEntry,,not-accessible,ringStationConfigIfIndex:ringStationConfigMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1.1,TOKEN-RING-RMON-MIB::ringStationConfigIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.5.1.2,TOKEN-RING-RMON-MIB::ringStationConfigMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.5.1.3,TOKEN-RING-RMON-MIB::ringStationConfigUpdateTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this configuration information was last updated (completely).
.1.3.6.1.2.1.16.10.5.1.4,TOKEN-RING-RMON-MIB::ringStationConfigLocation,OCTET,read-only,,mandatory,,The assigned physical location of this station.
.1.3.6.1.2.1.16.10.5.1.5,TOKEN-RING-RMON-MIB::ringStationConfigMicrocode,OCTET,read-only,,mandatory,,The microcode EC level of this station.
.1.3.6.1.2.1.16.10.5.1.6,TOKEN-RING-RMON-MIB::ringStationConfigGroupAddress,OCTET,read-only,,mandatory,,The low-order 4 octets of the group address recognized by this station.
.1.3.6.1.2.1.16.10.5.1.7,TOKEN-RING-RMON-MIB::ringStationConfigFunctionalAddress,OCTET,read-only,,mandatory,,the functional addresses recognized by this station.
.1.3.6.1.2.1.16.10.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsTable,,not-accessible,,mandatory,,A list of source routing statistics entries.
.1.3.6.1.2.1.16.10.6.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsEntry,,not-accessible,sourceRoutingStatsIfIndex,mandatory,,A collection of source routing statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.10.6.1.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which source routing statistics will be detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.6.1.2,TOKEN-RING-RMON-MIB::sourceRoutingStatsRingNumber,INTEGER,read-only,,mandatory,,The ring number of the ring monitored by this entry. When any object in this entry is created, the probe will attempt to discover the ring number. Only after the ring number is discovered will this object be created. After creating an object in this entry, the management station should poll this object to detect when it is created. Only after this object is created can the management station set the sourceRoutingStatsStatus entry to valid(1).
.1.3.6.1.2.1.16.10.6.1.3,TOKEN-RING-RMON-MIB::sourceRoutingStatsInFrames,Counter32,read-only,,mandatory,,The count of frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.4,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutFrames,Counter32,read-only,,mandatory,,The count of frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.5,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughFrames,Counter32,read-only,,mandatory,,The count of frames sent from another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.7,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRouteBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.8,TOKEN-RING-RMON-MIB::sourceRoutingStatsInOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.9,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.10,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.11,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.12,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.13,TOKEN-RING-RMON-MIB::sourceRoutingStatsLocalLLCFrames,Counter32,read-only,,mandatory,,The total number of frames received who had no RIF field (or had a RIF field that only included the local ring's number) and were not All Route Broadcast Frames.
.1.3.6.1.2.1.16.10.6.1.14,TOKEN-RING-RMON-MIB::sourceRoutingStats1HopFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 1 hop, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.15,TOKEN-RING-RMON-MIB::sourceRoutingStats2HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 2 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.16,TOKEN-RING-RMON-MIB::sourceRoutingStats3HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 3 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.17,TOKEN-RING-RMON-MIB::sourceRoutingStats4HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 4 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.18,TOKEN-RING-RMON-MIB::sourceRoutingStats5HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 5 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.19,TOKEN-RING-RMON-MIB::sourceRoutingStats6HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 6 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.20,TOKEN-RING-RMON-MIB::sourceRoutingStats7HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 7 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.21,TOKEN-RING-RMON-MIB::sourceRoutingStats8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.22,TOKEN-RING-RMON-MIB::sourceRoutingStatsMoreThan8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had more than 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.23,TOKEN-RING-RMON-MIB::sourceRoutingStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.6.1.24,TOKEN-RING-RMON-MIB::sourceRoutingStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this sourceRoutingStats entry.
.1.3.6.1.2.1.16.10.7,RMON2-MIB::ringStationControl2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.7.1,RMON2-MIB::ringStationControl2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.7.1.1,RMON2-MIB::ringStationControlDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.7.1.2,RMON2-MIB::ringStationControlCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.10.8,RMON2-MIB::sourceRoutingStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.8.1,RMON2-MIB::sourceRoutingStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.8.1.1,RMON2-MIB::sourceRoutingStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.8.1.2,RMON2-MIB::sourceRoutingStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.11,RMON2-MIB::protocolDir,,,,,,
.1.3.6.1.2.1.16.11.1,RMON2-MIB::protocolDirLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time the protocol directory was last modified, either through insertions or deletions, or through modifications of the protocolDirAddressMapConfig, protocolDirHostConfig, or protocolDirMatrixConfig.
.1.3.6.1.2.1.16.11.2,RMON2-MIB::protocolDirTable,,not-accessible,,current,,This table lists the protocols that this agent has the capability to decode and count. There is one entry in this table for each such protocol. These protocols represent different network-layer, transport-layer, and higher-layer protocols. The agent should boot up with this table preconfigured with those protocols that it knows about and wishes to monitor. Implementations are strongly encouraged to support protocols higher than the network layer (at least for the protocol distribution group), even for implementations that don't support the application-layer groups.
.1.3.6.1.2.1.16.11.2.1,RMON2-MIB::protocolDirEntry,,not-accessible,protocolDirID:protocolDirParameters,current,,A conceptual row in the protocolDirTable. An example of the indexing of this entry is protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the encoding of a length of 8, followed by 8 subids encoding the protocolDirID of 1.2048, followed by a length of 2 and the 2 subids encoding zero-valued parameters. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.11.2.1.1,RMON2-MIB::protocolDirID,OCTET,not-accessible,,current,,A unique identifier for a particular protocol. Standard identifiers will be defined in such a manner that they can often be used as specifications for new protocols - i.e., a tree-structured assignment mechanism that matches the protocol encapsulation 'tree' and that has algorithmic assignment mechanisms for certain subtrees. See RFC 2074 for more details. Despite the algorithmic mechanism, the probe will only place entries in here for those protocols it chooses to collect. In other words, it need not populate this table with all possible ethernet protocol types, nor need it create them on the fly when it sees them. Whether it does these things is a matter of product definition (cost/benefit, usability) and is up to the designer of the product. If an entry is written to this table with a protocolDirID that the agent doesn't understand, either directly or algorithmically, the SET request will be rejected with an inconsistentName or badValue (for SNMPv1) error.
.1.3.6.1.2.1.16.11.2.1.2,RMON2-MIB::protocolDirParameters,OCTET,not-accessible,,current,,A set of parameters for the associated protocolDirID. See the associated RMON2 Protocol Identifiers document for a description of the possible parameters. There will be one octet in this string for each sub-identifier in the protocolDirID, and the parameters will appear here in the same order as the associated sub-identifiers appear in the protocolDirID. Every node in the protocolDirID tree has a different, optional set of parameters defined (that is, the definition of parameters for a node is optional). The proper parameter value for each node is included in this string. Note that the inclusion of a parameter value in this string for each node is not optional. What is optional is that a node may have no parameters defined, in which case the parameter field for that node will be zero.
.1.3.6.1.2.1.16.11.2.1.3,RMON2-MIB::protocolDirLocalIndex,Integer32,read-only,,current,,The locally arbitrary but unique identifier associated with this protocolDir entry. The value for each supported protocol must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization, except that if a protocol is deleted and re-created, it must be re-created with a new value that has not been used since the last re-initialization. The specific value is meaningful only within a given SNMP entity. A protocolDirLocalIndex must not be re-used until the next agent restart in the event that the protocol directory entry is deleted.
.1.3.6.1.2.1.16.11.2.1.4,RMON2-MIB::protocolDirDescr,OCTET,read-create,,current,,A textual description of the protocol encapsulation. A probe may choose to describe only a subset of the entire encapsulation (e.g., only the highest layer). This object is intended for human consumption only. This object may not be modified if the associated protocolDirStatus object is equal to active(1).
.1.3.6.1.2.1.16.11.2.1.5,RMON2-MIB::protocolDirType,BITS,read-only,,current,extensible(0):addressRecognitionCapable(1),This object describes 2 attributes of this protocol directory entry. The presence or absence of the 'extensible' bit describes whether this protocol directory entry can be extended by the user by creating protocol directory entries that are children of this protocol. An example of an entry that will often allow extensibility is 'ip.udp'. The probe may automatically populate some children of this node, such as 'ip.udp.snmp' and 'ip.udp.dns'. A probe administrator or user may also populate additional children via remote SNMP requests that create entries in this table. When a child node is added for a protocol for which the probe has no built-in support extending a parent node (for which the probe does have built-in support), that child node is not extendable. This is termed 'limited extensibility'. When a child node is added through this extensibility mechanism, the values of protocolDirLocalIndex and protocolDirType shall be assigned by the agent. The other objects in the entry will be assigned by the manager who is creating the new entry. This object also describes whether this agent can recognize addresses for this protocol, should it be a network-level protocol. That is, while a probe may be able to recognize packets of a particular network-layer protocol and count them, it takes additional logic to be able to recognize the addresses in this protocol and to populate network-layer or application-layer tables with the addresses in this protocol. If this bit is set, the agent will recognize network-layer addresses for this protocol and populate the network- and application-layer host and matrix tables with these protocols. Note that when an entry is created, the agent will supply values for the bits that match the capabilities of the agent with respect to this protocol. Note that since row creations usually exercise the limited extensibility feature, these bits will usually be set to zero.
.1.3.6.1.2.1.16.11.2.1.6,RMON2-MIB::protocolDirAddressMapConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for address mapping for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to perform address mapping for the protocol or if this protocol is not a network-layer protocol. When an entry is created in this table by a management operation as part of the limited extensibility feature, the probe must set this value to notSupported(1), because limited extensibility of the protocolDirTable does not extend to interpreting addresses of the extended protocols. If the value of this object is notSupported(1), the probe will not perform address mapping for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports address mapping for this protocol and is configured to perform address mapping for this protocol for all addressMappingControlEntries and all interfaces. If the value of this object is supportedOff(2), the probe supports address mapping for this protocol but is configured to not perform address mapping for this protocol for any addressMappingControlEntries and all interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the addressMappingTable.
.1.3.6.1.2.1.16.11.2.1.7,RMON2-MIB::protocolDirHostConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer host tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlHostTable for this protocol or if the alHostTable is implemented but doesn't have the capability to track this protocol. Note that if the alHostTable is implemented, the probe may only support a protocol if it is supported in both the nlHostTable and the alHostTable. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate the nlHostTable and alHostTable with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track the nlHostTable or alHostTable for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of the nlHostTable and alHostTable for this protocol and is configured to track both tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of the nlHostTable and alHostTable for this protocol but is configured to not track these tables for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlHostTable and alHostTable. Note that since each alHostEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.8,RMON2-MIB::protocolDirMatrixConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer matrix tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlMatrixTables for this protocol or if the alMatrixTables are implemented but don't have the capability to track this protocol. Note that if the alMatrix tables are implemented, the probe may only support a protocol if it is supported in both of the nlMatrixTables and both of the alMatrixTables. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate both of the nlMatrixTables and both of the alMatrixTables with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track either of the nlMatrixTables or the alMatrixTables for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol and is configured to track these tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol but is configured to not track these tables for this protocol for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlMatrixTables and the alMatrixTables. Note that since each alMatrixEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.9,RMON2-MIB::protocolDirOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.11.2.1.10,RMON2-MIB::protocolDirStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this protocol directory entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable, nlMatrixSDTable, nlMatrixDSTable, alHostTable, alMatrixSDTable, and alMatrixDSTable shall be deleted.
.1.3.6.1.2.1.16.12,RMON2-MIB::protocolDist,,,,,,
.1.3.6.1.2.1.16.12.1,RMON2-MIB::protocolDistControlTable,,not-accessible,,current,,Controls the setup of protocol type distribution statistics tables. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of protocol statistics is available. Rationale: This table controls collection of very basic statistics for any or all of the protocols detected on a given interface. An NMS can use this table to quickly determine bandwidth allocation utilized by different protocols. A media-specific statistics collection could also be configured (e.g., etherStats, trPStats) to easily obtain total frame, octet, and droppedEvents for the same interface.
.1.3.6.1.2.1.16.12.1.1,RMON2-MIB::protocolDistControlEntry,,not-accessible,protocolDistControlIndex,current,,A conceptual row in the protocolDistControlTable. An example of the indexing of this entry is protocolDistControlDroppedFrames.7
.1.3.6.1.2.1.16.12.1.1.1,RMON2-MIB::protocolDistControlIndex,Integer32,not-accessible,,current,,A unique index for this protocolDistControlEntry.
.1.3.6.1.2.1.16.12.1.1.2,RMON2-MIB::protocolDistControlDataSource,OBJECT,read-create,,current,,The source of data for the this protocol distribution. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated protocolDistControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.12.1.1.3,RMON2-MIB::protocolDistControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.12.1.1.4,RMON2-MIB::protocolDistControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.12.1.1.5,RMON2-MIB::protocolDistControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.12.1.1.6,RMON2-MIB::protocolDistControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the protocolDistStatsTable shall be deleted.
.1.3.6.1.2.1.16.12.2,RMON2-MIB::protocolDistStatsTable,,not-accessible,,current,,An entry is made in this table for every protocol in the protocolDirTable that has been seen in at least one packet. Counters are updated in this table for every protocol type that is encountered when parsing a packet, but no counters are updated for packets with MAC-layer errors. Note that if a protocolDirEntry is deleted, all associated entries in this table are removed.
.1.3.6.1.2.1.16.12.2.1,RMON2-MIB::protocolDistStatsEntry,,not-accessible,protocolDistControlIndex:protocolDirLocalIndex,current,,A conceptual row in the protocolDistStatsTable. The index is composed of the protocolDistControlIndex of the associated protocolDistControlEntry, followed by the protocolDirLocalIndex of the associated protocol that this entry represents. In other words, the index identifies the protocol distribution an entry is a part of and the particular protocol that it represents. An example of the indexing of this entry is protocolDistStatsPkts.1.18
.1.3.6.1.2.1.16.12.2.1.1,RMON2-MIB::protocolDistStatsPkts,Gauge32,read-only,,current,,The number of packets of this protocol type received without errors. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.12.2.1.2,RMON2-MIB::protocolDistStatsOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type received since it was added to the protocolDistStatsTable (excluding framing bits, but including FCS octets), except for those octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.13,RMON2-MIB::addressMap,,,,,,
.1.3.6.1.2.1.16.13.1,RMON2-MIB::addressMapInserts,Counter32,read-only,,current,,The number of times an address mapping entry has been inserted into the addressMapTable. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.2,RMON2-MIB::addressMapDeletes,Counter32,read-only,,current,,The number of times an address mapping entry has been deleted from the addressMapTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.3,RMON2-MIB::addressMapMaxDesiredEntries,Integer32,read-write,,current,,The maximum number of entries that are desired in the addressMapTable. The probe will not create more than this number of entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.13.4,RMON2-MIB::addressMapControlTable,,not-accessible,,current,,A table to control the collection of mappings from network layer address to physical address to interface. Note that this is not like the typical RMON controlTable and dataTable in which each entry creates its own data table. Each entry in this table enables the discovery of addresses on a new interface and the placement of address mappings into the central addressMapTable. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of address mappings is available.
.1.3.6.1.2.1.16.13.4.1,RMON2-MIB::addressMapControlEntry,,not-accessible,addressMapControlIndex,current,,A conceptual row in the addressMapControlTable. An example of the indexing of this entry is addressMapControlDroppedFrames.1
.1.3.6.1.2.1.16.13.4.1.1,RMON2-MIB::addressMapControlIndex,Integer32,not-accessible,,current,,A unique index for this entry in the addressMapControlTable.
.1.3.6.1.2.1.16.13.4.1.2,RMON2-MIB::addressMapControlDataSource,OBJECT,read-create,,current,,The source of data for this addressMapControlEntry.
.1.3.6.1.2.1.16.13.4.1.3,RMON2-MIB::addressMapControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.13.4.1.4,RMON2-MIB::addressMapControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.13.4.1.5,RMON2-MIB::addressMapControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this addressMap control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the addressMapTable shall be deleted.
.1.3.6.1.2.1.16.13.5,RMON2-MIB::addressMapTable,,not-accessible,,current,,A table of mappings from network layer address to physical address to interface. The probe will add entries to this table based on the source MAC and network addresses seen in packets without MAC-level errors. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirAddressMapConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirAddressMapConfig value of supportedOff(2).
.1.3.6.1.2.1.16.13.5.1,RMON2-MIB::addressMapEntry,,not-accessible,addressMapTimeMark:protocolDirLocalIndex:addressMapNetworkAddress:addressMapSource,current,,A conceptual row in the addressMapTable. The protocolDirLocalIndex in the index identifies the network layer protocol of the addressMapNetworkAddress. An example of the indexing of this entry is addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.13.5.1.1,RMON2-MIB::addressMapTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.13.5.1.2,RMON2-MIB::addressMapNetworkAddress,OCTET,not-accessible,,current,,The network address for this relation. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of ip, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.13.5.1.3,RMON2-MIB::addressMapSource,OBJECT,not-accessible,,current,,The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [RFC2863], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface that is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.
.1.3.6.1.2.1.16.13.5.1.4,RMON2-MIB::addressMapPhysicalAddress,OCTET,read-only,,current,,The last source physical address on which the associated network address was seen. If the protocol of the associated network address was encapsulated inside of a network-level or higher protocol, this will be the address of the next-lower protocol with the addressRecognitionCapable bit enabled and will be formatted as specified for that protocol.
.1.3.6.1.2.1.16.13.5.1.5,RMON2-MIB::addressMapLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last created or the values of the physical address changed. This can be used to help detect duplicate address problems, in which case this object will be updated frequently.
.1.3.6.1.2.1.16.14,RMON2-MIB::nlHost,,,,,,
.1.3.6.1.2.1.16.14.1,RMON2-MIB::hlHostControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) host table control entries. These entries will enable the collection of the network- and application-level host tables indexed by network addresses. Both the network- and application-level host tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer host records in memory, it can derive network-layer host records from them.) Entries in the nlHostTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alHostTable, entries in the alHostTable will be created on behalf of each entry in this table. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of host statistics is available.
.1.3.6.1.2.1.16.14.1.1,RMON2-MIB::hlHostControlEntry,,not-accessible,hlHostControlIndex,current,,A conceptual row in the hlHostControlTable. An example of the indexing of this entry is hlHostControlNlDroppedFrames.1
.1.3.6.1.2.1.16.14.1.1.1,RMON2-MIB::hlHostControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlHostControlTable. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the nlHostTable, and optionally in the alHostTable, on behalf of this hlHostControlEntry.
.1.3.6.1.2.1.16.14.1.1.2,RMON2-MIB::hlHostControlDataSource,OBJECT,read-create,,current,,The source of data for the associated host tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlHostControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.14.1.1.3,RMON2-MIB::hlHostControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated nlHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlHostTable is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.4,RMON2-MIB::hlHostControlNlInserts,Counter32,read-only,,current,,The number of times an nlHost entry has been inserted into the nlHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.5,RMON2-MIB::hlHostControlNlDeletes,Counter32,read-only,,current,,The number of times an nlHost entry has been deleted from the nlHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.6,RMON2-MIB::hlHostControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlHostTable on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.7,RMON2-MIB::hlHostControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated alHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alHostTable is not implemented or is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.8,RMON2-MIB::hlHostControlAlInserts,Counter32,read-only,,current,,The number of times an alHost entry has been inserted into the alHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.9,RMON2-MIB::hlHostControlAlDeletes,Counter32,read-only,,current,,The number of times an alHost entry has been deleted from the alHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.10,RMON2-MIB::hlHostControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alHost table on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.11,RMON2-MIB::hlHostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.14.1.1.12,RMON2-MIB::hlHostControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlHostControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable and alHostTable shall be deleted.
.1.3.6.1.2.1.16.14.2,RMON2-MIB::nlHostTable,,not-accessible,,current,,A collection of statistics for a particular network layer address that has been discovered on an interface of this device. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors.
.1.3.6.1.2.1.16.14.2.1,RMON2-MIB::nlHostEntry,,not-accessible,hlHostControlIndex:nlHostTimeMark:protocolDirLocalIndex:nlHostAddress,current,,A conceptual row in the nlHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network layer protocol of the nlHostAddress. An example of the indexing of this entry is nlHostOutPkts.1.783495.18.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.14.2.1.1,RMON2-MIB::nlHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.14.2.1.2,RMON2-MIB::nlHostAddress,OCTET,not-accessible,,current,,The network address for this nlHostEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.14.2.1.3,RMON2-MIB::nlHostInPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted to this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.4,RMON2-MIB::nlHostOutPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.5,RMON2-MIB::nlHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.6,RMON2-MIB::nlHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.7,RMON2-MIB::nlHostOutMacNonUnicastPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address that were directed to any MAC broadcast addresses or to any MAC multicast addresses since this host was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.8,RMON2-MIB::nlHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15,RMON2-MIB::nlMatrix,,,,,,
.1.3.6.1.2.1.16.15.1,RMON2-MIB::hlMatrixControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) matrix control entries. These entries will enable the collection of the network- and application-level matrix tables containing conversation statistics indexed by pairs of network addresses. Both the network- and application-level matrix tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer matrix records in memory, it can derive network-layer matrix records from them.) Entries in the nlMatrixSDTable and nlMatrixDSTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alMatrix tables, entries in the alMatrix tables will be created on behalf of each entry in this table.
.1.3.6.1.2.1.16.15.1.1,RMON2-MIB::hlMatrixControlEntry,,not-accessible,hlMatrixControlIndex,current,,A conceptual row in the hlMatrixControlTable. An example of indexing of this entry is hlMatrixControlNlDroppedFrames.1
.1.3.6.1.2.1.16.15.1.1.1,RMON2-MIB::hlMatrixControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlMatrixControlTable. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the nlMatrixSDTable and the nlMatrixDSTable, and optionally the alMatrixSDTable and alMatrixDSTable, on behalf of this hlMatrixControlEntry.
.1.3.6.1.2.1.16.15.1.1.2,RMON2-MIB::hlMatrixControlDataSource,OBJECT,read-create,,current,,The source of the data for the associated matrix tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlMatrixControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.1.1.3,RMON2-MIB::hlMatrixControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlMatrixTables are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.4,RMON2-MIB::hlMatrixControlNlInserts,Counter32,read-only,,current,,The number of times an nlMatrix entry has been inserted into the nlMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the sum of then nlMatrixSDTable and nlMatrixDSTable sizes can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.5,RMON2-MIB::hlMatrixControlNlDeletes,Counter32,read-only,,current,,The number of times an nlMatrix entry has been deleted from the nlMatrix tables (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.6,RMON2-MIB::hlMatrixControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.7,RMON2-MIB::hlMatrixControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alMatrixTables are not implemented or are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.8,RMON2-MIB::hlMatrixControlAlInserts,Counter32,read-only,,current,,The number of times an alMatrix entry has been inserted into the alMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the alMatrixSDTable and alMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.9,RMON2-MIB::hlMatrixControlAlDeletes,Counter32,read-only,,current,,The number of times an alMatrix entry has been deleted from the alMatrix tables. If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the alMatrixSDTable and alMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.10,RMON2-MIB::hlMatrixControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.11,RMON2-MIB::hlMatrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.1.1.12,RMON2-MIB::hlMatrixControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlMatrixControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixSDTable, nlMatrixDSTable, alMatrixSDTable, and alMatrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.2,RMON2-MIB::nlMatrixSDTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all conversations from a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixDSTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.2.1,RMON2-MIB::nlMatrixSDEntry,,not-accessible,hlMatrixControlIndex:nlMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress,current,,A conceptual row in the nlMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. An example of the indexing of this table is nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.2.1.1,RMON2-MIB::nlMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.2.1.2,RMON2-MIB::nlMatrixSDSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.3,RMON2-MIB::nlMatrixSDDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.4,RMON2-MIB::nlMatrixSDPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.2.1.5,RMON2-MIB::nlMatrixSDOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.2.1.6,RMON2-MIB::nlMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.3,RMON2-MIB::nlMatrixDSTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all conversations to a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixSDTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.3.1,RMON2-MIB::nlMatrixDSEntry,,not-accessible,hlMatrixControlIndex:nlMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress,current,,A conceptual row in the nlMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixDSSourceAddress and nlMatrixDSDestAddress. An example of the indexing of this table is nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.3.1.1,RMON2-MIB::nlMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.3.1.2,RMON2-MIB::nlMatrixDSSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.3,RMON2-MIB::nlMatrixDSDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.4,RMON2-MIB::nlMatrixDSPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.3.1.5,RMON2-MIB::nlMatrixDSOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.3.1.6,RMON2-MIB::nlMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.4,RMON2-MIB::nlMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.15.4.1,RMON2-MIB::nlMatrixTopNControlEntry,,not-accessible,nlMatrixTopNControlIndex,current,,A conceptual row in the nlMatrixTopNControlTable. An example of the indexing of this table is nlMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.15.4.1.1,RMON2-MIB::nlMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.15.4.1.2,RMON2-MIB::nlMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The nlMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The nlMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.4.1.3,RMON2-MIB::nlMatrixTopNControlRateBase,INTEGER,read-create,,current,nlMatrixTopNPkts(1):nlMatrixTopNOctets(2):nlMatrixTopNHighCapacityPkts(3):nlMatrixTopNHighCapacityOctets(4),The variable for each nlMatrix[SD/DS] entry that the nlMatrixTopNEntries are sorted by, as well as a control for the table that the results will be reported in. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1). If this value is less than or equal to 2, when the report is prepared, entries are created in the nlMatrixTopNTable associated with this object. If this value is greater than or equal to 3, when the report is prepared, entries are created in the nlMatrixTopNHighCapacityTable associated with this object.
.1.3.6.1.2.1.16.15.4.1.4,RMON2-MIB::nlMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated nlMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of nlMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the nlMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the nlMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.15.4.1.5,RMON2-MIB::nlMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.15.4.1.6,RMON2-MIB::nlMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated nlMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the nlMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this nlMatrixTopNControlEntry.
.1.3.6.1.2.1.16.15.4.1.7,RMON2-MIB::nlMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set nlMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.15.4.1.8,RMON2-MIB::nlMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated nlMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated nlMatrixTopNControlRequestedSize object. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of nlMatrixTopNPktRate or nlMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.15.4.1.9,RMON2-MIB::nlMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated nlMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.15.4.1.10,RMON2-MIB::nlMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.4.1.11,RMON2-MIB::nlMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this nlMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.5,RMON2-MIB::nlMatrixTopNTable,,not-accessible,,current,,A set of statistics for those network-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.15.5.1,RMON2-MIB::nlMatrixTopNEntry,,not-accessible,nlMatrixTopNControlIndex:nlMatrixTopNIndex,current,,A conceptual row in the nlMatrixTopNTable. The nlMatrixTopNControlIndex value in the index identifies the nlMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is nlMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.15.5.1.1,RMON2-MIB::nlMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNPktRate until index N is assigned or there are no more nlMatrixTopNEntries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNOctetRate until index N is assigned or there are no more nlMatrixTopNEntries.
.1.3.6.1.2.1.16.15.5.1.2,RMON2-MIB::nlMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.15.5.1.3,RMON2-MIB::nlMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.4,RMON2-MIB::nlMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the nlMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.5,RMON2-MIB::nlMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.6,RMON2-MIB::nlMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. (Note that the corresponding nlMatrixSDPkts object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, the sort of topN entries is based entirely on nlMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.15.5.1.7,RMON2-MIB::nlMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDOctets object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.8,RMON2-MIB::nlMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixDSOctets object. (Note that the corresponding nlMatrixSDOctets object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, the sort of topN entries is based entirely on nlMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.16,RMON2-MIB::alHost,,,,,,
.1.3.6.1.2.1.16.16.1,RMON2-MIB::alHostTable,,not-accessible,,current,,A collection of statistics for a particular protocol from a particular network address that has been discovered on an interface of this device. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address exists in the nlHostTable and will be deleted from this table if their address is deleted from the nlHostTable.
.1.3.6.1.2.1.16.16.1.1,RMON2-MIB::alHostEntry,,not-accessible,hlHostControlIndex:alHostTimeMark:protocolDirLocalIndex:nlHostAddress:protocolDirLocalIndex,current,,A conceptual row in the alHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the address. The nlHostAddress value in the index identifies the network- layer address of this entry. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing in this entry is alHostOutPkts.1.783495.18.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.16.1.1.1,RMON2-MIB::alHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.16.1.1.2,RMON2-MIB::alHostInPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted to this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.3,RMON2-MIB::alHostOutPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted by this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.4,RMON2-MIB::alHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.5,RMON2-MIB::alHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.6,RMON2-MIB::alHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17,RMON2-MIB::alMatrix,,,,,,
.1.3.6.1.2.1.16.17.1,RMON2-MIB::alMatrixSDTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all statistics from a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixSDTable and will be deleted from this table if the address pair is deleted from the nlMatrixSDTable.
.1.3.6.1.2.1.16.17.1.1,RMON2-MIB::alMatrixSDEntry,,not-accessible,hlMatrixControlIndex:alMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. The nlMatrixSDSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The nlMatrixSDDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.1.1.1,RMON2-MIB::alMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.1.1.2,RMON2-MIB::alMatrixSDPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.1.1.3,RMON2-MIB::alMatrixSDOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.1.1.4,RMON2-MIB::alMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.2,RMON2-MIB::alMatrixDSTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all statistics to a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixDSTable and will be deleted from this table if the address pair is deleted from the nlMatrixDSTable.
.1.3.6.1.2.1.16.17.2.1,RMON2-MIB::alMatrixDSEntry,,not-accessible,hlMatrixControlIndex:alMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the alMatrixDSSourceAddress and alMatrixDSDestAddress. The nlMatrixDSDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The nlMatrixDSSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.2.1.1,RMON2-MIB::alMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.2.1.2,RMON2-MIB::alMatrixDSPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.2.1.3,RMON2-MIB::alMatrixDSOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.2.1.4,RMON2-MIB::alMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.3,RMON2-MIB::alMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.17.3.1,RMON2-MIB::alMatrixTopNControlEntry,,not-accessible,alMatrixTopNControlIndex,current,,A conceptual row in the alMatrixTopNControlTable. An example of the indexing of this table is alMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.17.3.1.1,RMON2-MIB::alMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.17.3.1.2,RMON2-MIB::alMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The alMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The alMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.3,RMON2-MIB::alMatrixTopNControlRateBase,INTEGER,read-create,,current,alMatrixTopNTerminalsPkts(1):alMatrixTopNTerminalsOctets(2):alMatrixTopNAllPkts(3):alMatrixTopNAllOctets(4):alMatrixTopNTerminalsHighCapacityPkts(5):alMatrixTopNTerminalsHighCapacityOctets(6):alMatrixTopNAllHighCapacityPkts(7):alMatrixTopNAllHighCapacityOctets(8),This object controls which alMatrix[SD/DS] entry that the alMatrixTopNEntries are sorted by, which view of the matrix table that will be used, as well as which table the results will be reported in. The values alMatrixTopNTerminalsPkts, alMatrixTopNTerminalsOctets, alMatrixTopNTerminalsHighCapacityPkts, and alMatrixTopNTerminalsHighCapacityOctets cause collection only from protocols that have no child protocols that are counted. The values alMatrixTopNAllPkts, alMatrixTopNAllOctets, alMatrixTopNAllHighCapacityPkts, and alMatrixTopNAllHighCapacityOctets cause collection from all alMatrix entries. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.4,RMON2-MIB::alMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated alMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of alMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the alMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the alMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.17.3.1.5,RMON2-MIB::alMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.17.3.1.6,RMON2-MIB::alMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated alMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the alMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this alMatrixTopNControlEntry.
.1.3.6.1.2.1.16.17.3.1.7,RMON2-MIB::alMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set alMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.17.3.1.8,RMON2-MIB::alMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated alMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated alMatrixTopNControlRequestedSize object. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of alMatrixTopNPktRate or alMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.17.3.1.9,RMON2-MIB::alMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated alMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.17.3.1.10,RMON2-MIB::alMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.17.3.1.11,RMON2-MIB::alMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this alMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the alMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.17.4,RMON2-MIB::alMatrixTopNTable,,not-accessible,,current,,A set of statistics for those application-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.17.4.1,RMON2-MIB::alMatrixTopNEntry,,not-accessible,alMatrixTopNControlIndex:alMatrixTopNIndex,current,,A conceptual row in the alMatrixTopNTable. The alMatrixTopNControlIndex value in the index identifies the alMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is alMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.17.4.1.1,RMON2-MIB::alMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNPktRate until index N is assigned or there are no more alMatrixTopNEntries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNOctetRate until index N is assigned or there are no more alMatrixTopNEntries.
.1.3.6.1.2.1.16.17.4.1.2,RMON2-MIB::alMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.17.4.1.3,RMON2-MIB::alMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.4,RMON2-MIB::alMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.5,RMON2-MIB::alMatrixTopNAppProtocolDirLocalIndex,Integer32,read-only,,current,,The type of the protocol counted by this matrix entry.
.1.3.6.1.2.1.16.17.4.1.6,RMON2-MIB::alMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDPkts object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.7,RMON2-MIB::alMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSPkts object. (Note that the corresponding alMatrixSDPkts object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, the sort of topN entries is based entirely on alMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.17.4.1.8,RMON2-MIB::alMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDOctets object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.9,RMON2-MIB::alMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSOctets object. (Note that the corresponding alMatrixSDOctets object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, the sort of topN entries is based entirely on alMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.18,RMON2-MIB::usrHistory,,,,,,
.1.3.6.1.2.1.16.18.1,RMON2-MIB::usrHistoryControlTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.1.1,RMON2-MIB::usrHistoryControlEntry,,not-accessible,usrHistoryControlIndex,current,,A list of parameters that set up a group of user-defined MIB objects to be sampled periodically (called a bucket-group). For example, an instance of usrHistoryControlInterval might be named usrHistoryControlInterval.1
.1.3.6.1.2.1.16.18.1.1.1,RMON2-MIB::usrHistoryControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the usrHistoryControlTable. Each such entry defines a set of samples at a particular interval for a specified set of MIB instances available from the managed system.
.1.3.6.1.2.1.16.18.1.1.2,RMON2-MIB::usrHistoryControlObjects,Integer32,read-create,,current,,The number of MIB objects to be collected in the portion of usrHistoryTable associated with this usrHistoryControlEntry. This object may not be modified if the associated instance of usrHistoryControlStatus is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.3,RMON2-MIB::usrHistoryControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When this object is created or modified, the probe should set usrHistoryControlBucketsGranted as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.18.1.1.4,RMON2-MIB::usrHistoryControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When the associated usrHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated usrHistoryControlBucketsRequested object. The associated usrHistoryControlBucketsRequested object should be set before or at the same time as this object to allow the probe to accurately estimate the resources required for this usrHistoryControlEntry. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the usrHistoryTable. When the number of buckets reaches the value of this object and a new bucket is to be added to the usrHistoryTable, the oldest bucket associated with this usrHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the usrHistoryTable associated with this usrHistoryControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated usrHistory entries may be allowed to grow.
.1.3.6.1.2.1.16.18.1.1.5,RMON2-MIB::usrHistoryControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the usrHistory table associated with this usrHistoryControlEntry. Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and to set the usrHistoryControlInterval object to a value less than this interval. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.6,RMON2-MIB::usrHistoryControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.18.1.1.7,RMON2-MIB::usrHistoryControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this variable history control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the usrHistoryTable shall be deleted.
.1.3.6.1.2.1.16.18.2,RMON2-MIB::usrHistoryObjectTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.2.1,RMON2-MIB::usrHistoryObjectEntry,,not-accessible,usrHistoryControlIndex:usrHistoryObjectIndex,current,,A list of MIB instances to be sampled periodically. Entries in this table are created when an associated usrHistoryControlObjects object is created. The usrHistoryControlIndex value in the index is that of the associated usrHistoryControlEntry. For example, an instance of usrHistoryObjectVariable might be usrHistoryObjectVariable.1.3
.1.3.6.1.2.1.16.18.2.1.1,RMON2-MIB::usrHistoryObjectIndex,Integer32,not-accessible,,current,,An index used to uniquely identify an entry in the usrHistoryObject table. Each such entry defines a MIB instance to be collected periodically.
.1.3.6.1.2.1.16.18.2.1.2,RMON2-MIB::usrHistoryObjectVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of Integer32 (Integer32, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the user history mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. See USM [RFC3414] and VACM [RFC3415] for more information. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.2.1.3,RMON2-MIB::usrHistoryObjectSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable for storage in the usrHistoryTable. If the value of this object is absoluteValue(1), the value of the selected variable will be copied directly into the history bucket. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference will be stored in the history bucket. If the associated usrHistoryObjectVariable instance could not be obtained at the previous sample interval, then a delta sample is not possible, and the value of the associated usrHistoryValStatus object for this interval will be valueNotAvailable(1). This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.3,RMON2-MIB::usrHistoryTable,,not-accessible,,current,,A list of user-defined history entries.
.1.3.6.1.2.1.16.18.3.1,RMON2-MIB::usrHistoryEntry,,not-accessible,usrHistoryControlIndex:usrHistorySampleIndex:usrHistoryObjectIndex,current,,A historical sample of user-defined variables. This sample is associated with the usrHistoryControlEntry that set up the parameters for a regular collection of these samples. The usrHistoryControlIndex value in the index identifies the usrHistoryControlEntry on whose behalf this entry was created. The usrHistoryObjectIndex value in the index identifies the usrHistoryObjectEntry on whose behalf this entry was created. For example, an instance of usrHistoryAbsValue, which represents the 14th sample of a variable collected as specified by usrHistoryControlEntry.1 and usrHistoryObjectEntry.1.5, would be named usrHistoryAbsValue.1.14.5
.1.3.6.1.2.1.16.18.3.1.1,RMON2-MIB::usrHistorySampleIndex,Integer32,not-accessible,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same usrHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.18.3.1.2,RMON2-MIB::usrHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require that the probe delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample that is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.18.3.1.3,RMON2-MIB::usrHistoryIntervalEnd,TimeTicks,read-only,,current,,The value of sysUpTime at the end of the interval over which this sample was measured.
.1.3.6.1.2.1.16.18.3.1.4,RMON2-MIB::usrHistoryAbsValue,Gauge32,read-only,,current,,The absolute value (i.e., unsigned value) of the user-specified statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed. To obtain the true value for this sampling interval, the associated instance of usrHistoryValStatus must be checked, and usrHistoryAbsValue adjusted as necessary. If the MIB instance could not be accessed during the sampling interval, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'. The access control check prescribed in the definition of usrHistoryObjectVariable SHOULD be checked for each sampling interval. If this check determines that access should not be allowed, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'.
.1.3.6.1.2.1.16.18.3.1.5,RMON2-MIB::usrHistoryValStatus,INTEGER,read-only,,current,valueNotAvailable(1):valuePositive(2):valueNegative(3),This object indicates the validity and sign of the data in the associated instance of usrHistoryAbsValue. If the MIB instance could not be accessed during the sampling interval, then 'valueNotAvailable(1)' will be returned. If the sample is valid and the actual value of the sample is greater than or equal to zero, then 'valuePositive(2)' is returned. If the sample is valid and the actual value of the sample is less than zero, 'valueNegative(3)' will be returned. The associated instance of usrHistoryAbsValue should be multiplied by -1 to obtain the true sample value.
.1.3.6.1.2.1.16.19,RMON2-MIB::probeConfig,,,,,,
.1.3.6.1.2.1.16.19.1,RMON2-MIB::probeCapabilities,BITS,read-only,,current,etherStats(0):historyControl(1):etherHistory(2):alarm(3):hosts(4):hostTopN(5):matrix(6):filter(7):capture(8):event(9):tokenRingMLStats(10):tokenRingPStats(11):tokenRingMLHistory(12):tokenRingPHistory(13):ringStation(14):ringStationOrder(15):ringStationConfig(16):sourceRouting(17):protocolDirectory(18):protocolDistribution(19):addressMapping(20):nlHost(21):nlMatrix(22):alHost(23):alMatrix(24):usrHistory(25):probeConfig(26),An indication of the RMON MIB groups supported on at least one interface by this probe.
.1.3.6.1.2.1.16.19.2,RMON2-MIB::probeSoftwareRev,OCTET,read-only,,current,,The software revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.3,RMON2-MIB::probeHardwareRev,OCTET,read-only,,current,,The hardware revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.4,RMON2-MIB::probeDateTime,OCTET,read-write,,current,,Probe's current date and time. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then time zone information (fields 8-10) is not present, and that if no time information is known, the null string is returned.
.1.3.6.1.2.1.16.19.5,RMON2-MIB::probeResetControl,INTEGER,read-write,,current,running(1):warmBoot(2):coldBoot(3),Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and to restart the application software. When the device is running normally, this variable has a value of running(1).
.1.3.6.1.2.1.16.19.6,RMON2-MIB::probeDownloadFile,OCTET,read-write,,deprecated,,The file name to be downloaded from the TFTP server when a download is next requested via this MIB. This value is set to the zero-length string when no file name has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.7,RMON2-MIB::probeDownloadTFTPServer,IpAddress,read-write,,deprecated,,The IP address of the TFTP server that contains the boot image to load when a download is next requested via this MIB. This value is set to '0.0.0.0' when no IP address has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.8,RMON2-MIB::probeDownloadAction,INTEGER,read-write,,deprecated,notDownloading(1):downloadToPROM(2):downloadToRAM(3),When this object is set to downloadToRAM(3) or downloadToPROM(2), the device will discontinue its normal operation and begin download of the image specified by probeDownloadFile from the server specified by probeDownloadTFTPServer using the TFTP protocol. If downloadToRAM(3) is specified, the new image is copied to RAM only (the old image remains unaltered in the flash EPROM). If downloadToPROM(2) is specified, the new image is written to the flash EPROM memory after its checksum has been verified to be correct. When the download process is completed, the device will warm boot to restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1). This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.9,RMON2-MIB::probeDownloadStatus,INTEGER,read-only,,deprecated,downloadSuccess(1):downloadStatusUnknown(2):downloadGeneralError(3):downloadNoResponseFromServer(4):downloadChecksumError(5):downloadIncompatibleImage(6):downloadTftpFileNotFound(7):downloadTftpAccessViolation(8),The status of the last download procedure, if any. This object will have a value of downloadStatusUnknown(2) if no download process has been performed. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10,RMON2-MIB::serialConfigTable,,not-accessible,,deprecated,,A table of serial interface configuration entries. This data will be stored in non-volatile memory and preserved across probe resets or power loss. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10.1,RMON2-MIB::serialConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular serial interface on this device. If the device has no serial interfaces, this table is empty. The index is composed of the ifIndex assigned to this serial line interface.
.1.3.6.1.2.1.16.19.10.1.1,RMON2-MIB::serialMode,INTEGER,read-create,,deprecated,direct(1):modem(2),The type of incoming connection to be expected on this serial interface.
.1.3.6.1.2.1.16.19.10.1.2,RMON2-MIB::serialProtocol,INTEGER,read-create,,deprecated,other(1):slip(2):ppp(3),The type of data link encapsulation to be used on this serial interface.
.1.3.6.1.2.1.16.19.10.1.3,RMON2-MIB::serialTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the Management Station has initiated the conversation over the serial link. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface. Use the serialDialoutTimeout in the case where the probe has initiated the connection for the purpose of sending a trap.
.1.3.6.1.2.1.16.19.10.1.4,RMON2-MIB::serialModemInitString,OCTET,read-create,,deprecated,,A control string that controls how a modem attached to this serial interface should be initialized. The initialization is performed once during startup and again after each connection is terminated if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^s^MATE0Q0V1X4 S0=1 S2=43^M'.
.1.3.6.1.2.1.16.19.10.1.5,RMON2-MIB::serialModemHangUpString,OCTET,read-create,,deprecated,,A control string that specifies how to disconnect a modem connection on this serial interface. This object is only meaningful if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^d2^s+++^d2^sATH0^M^d2'.
.1.3.6.1.2.1.16.19.10.1.6,RMON2-MIB::serialModemConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing substrings that describe the expected modem connection response code and associated bps rate. The substrings are delimited by the first character in the string, for example: /CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600 will be interpreted as: response code bps rate CONNECT 300 CONNECT 1200 1200 CONNECT 2400 2400 CONNECT 4800 4800 CONNECT 9600 9600 The agent will use the information in this string to adjust the bps rate of this serial interface once a modem connection is established. A value that is appropriate for a wide variety of modems is: '/CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600/CONNECT 14400/14400/ CONNECT 19200/19200/CONNECT 38400/38400/'.
.1.3.6.1.2.1.16.19.10.1.7,RMON2-MIB::serialModemNoConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing response codes that may be generated by a modem to report the reason why a connection attempt has failed. The response codes are delimited by the first character in the string, for example: /NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/ If one of these response codes is received via this serial interface while attempting to make a modem connection, the agent will issue the hang up command as specified by serialModemHangUpString. A value that is appropriate for a wide variety of modems is: '/NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/'.
.1.3.6.1.2.1.16.19.10.1.8,RMON2-MIB::serialDialoutTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the probe initiates the serial connection with the intention of contacting a management station. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface.
.1.3.6.1.2.1.16.19.10.1.9,RMON2-MIB::serialStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.11,RMON2-MIB::netConfigTable,,not-accessible,,deprecated,,A table of netConfigEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.11.1,RMON2-MIB::netConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface.
.1.3.6.1.2.1.16.19.11.1.1,RMON2-MIB::netConfigIPAddress,IpAddress,read-create,,deprecated,,The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.2,RMON2-MIB::netConfigSubnetMask,IpAddress,read-create,,deprecated,,The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.3,RMON2-MIB::netConfigStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this netConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.12,RMON2-MIB::netDefaultGateway,IpAddress,read-write,,deprecated,,The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
.1.3.6.1.2.1.16.19.13,RMON2-MIB::trapDestTable,,not-accessible,,deprecated,,A list of trap destination entries.
.1.3.6.1.2.1.16.19.13.1,RMON2-MIB::trapDestEntry,,not-accessible,trapDestIndex,deprecated,,This entry includes a destination IP address to which traps are sent for this community.
.1.3.6.1.2.1.16.19.13.1.1,RMON2-MIB::trapDestIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this trapDestEntry.
.1.3.6.1.2.1.16.19.13.1.2,RMON2-MIB::trapDestCommunity,OCTET,read-create,,deprecated,,A community to which this destination address belongs. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the trapDestTable with a trapDestCommunity equal to eventCommunity, as long as no access control mechanism precludes it (e.g., VACM). This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.3,RMON2-MIB::trapDestProtocol,INTEGER,read-create,,deprecated,ip(1):ipx(2),The protocol with which this trap is to be sent.
.1.3.6.1.2.1.16.19.13.1.4,RMON2-MIB::trapDestAddress,OCTET,read-create,,deprecated,,The destination address for traps on behalf of this entry. If the associated trapDestProtocol object is equal to ip(1), the encoding of this object is the same as the snmpUDPAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpUDPAddress of length 6: -- -- octets contents encoding -- 1-4 IP-address network-byte order -- 5-6 UDP-port network-byte order If the associated trapDestProtocol object is equal to ipx(2), the encoding of this object is the same as the snmpIPXAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpIPXAddress of length 12: -- -- octets contents encoding -- 1-4 network-number network-byte order -- 5-10 physical-address network-byte order -- 11-12 socket-number network-byte order This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.5,RMON2-MIB::trapDestOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.13.1.6,RMON2-MIB::trapDestStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this trap destination entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.14,RMON2-MIB::serialConnectionTable,,not-accessible,,deprecated,,A list of serialConnectionEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.14.1,RMON2-MIB::serialConnectionEntry,,not-accessible,serialConnectIndex,deprecated,,Configuration for a SLIP link over a serial line.
.1.3.6.1.2.1.16.19.14.1.1,RMON2-MIB::serialConnectIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this serialConnection entry.
.1.3.6.1.2.1.16.19.14.1.2,RMON2-MIB::serialConnectDestIpAddress,IpAddress,read-create,,deprecated,,The IP Address that can be reached at the other end of this serial connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.3,RMON2-MIB::serialConnectType,INTEGER,read-create,,deprecated,direct(1):modem(2):switch(3):modemSwitch(4),The type of outgoing connection to be made. If this object has the value direct(1), then a direct serial connection is assumed. If this object has the value modem(2), then serialConnectDialString will be used to make a modem connection. If this object has the value switch(3), then serialConnectSwitchConnectSeq will be used to establish the connection over a serial data switch, and serialConnectSwitchDisconnectSeq will be used to terminate the connection. If this object has the value modem-switch(4), then a modem connection will be made first, followed by the switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.4,RMON2-MIB::serialConnectDialString,OCTET,read-create,,deprecated,,A control string that specifies how to dial the phone number in order to establish a modem connection. The string should include the dialing prefix and suffix. For example: '^s^MATD9,888-1234^M' will instruct the Probe to send a carriage return, followed by the dialing prefix 'ATD', the phone number '9,888-1234', and a carriage return as the dialing suffix. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.5,RMON2-MIB::serialConnectSwitchConnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to establish a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.6,RMON2-MIB::serialConnectSwitchDisconnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to terminate a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.7,RMON2-MIB::serialConnectSwitchResetSeq,OCTET,read-create,,deprecated,,A control string that specifies how to reset a data switch in the event of a timeout. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.8,RMON2-MIB::serialConnectOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.14.1.9,RMON2-MIB::serialConnectStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConnectionEntry. If the manager attempts to set this object to active(1) when the serialConnectType is set to modem(2) or modem-switch(4) and the serialConnectDialString is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). If the manager attempts to set this object to active(1) when the serialConnectType is set to switch(3) or modem-switch(4) and the serialConnectSwitchConnectSeq, the serialConnectSwitchDisconnectSeq, or the serialConnectSwitchResetSeq is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.20,RMON-MIB::rmonConformance,,,,,,
.1.3.6.1.2.1.16.20.1,RMON2-MIB::rmon2MIBCompliances,,,,,,
.1.3.6.1.2.1.16.20.1.1,RMON2-MIB::rmon2MIBCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB
.1.3.6.1.2.1.16.20.1.2,RMON2-MIB::rmon2MIBApplicationLayerCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB with Application-Layer Enhancements.
.1.3.6.1.2.1.16.20.2,RMON2-MIB::rmon2MIBGroups,,,,,,
.1.3.6.1.2.1.16.20.2.1,RMON2-MIB::protocolDirectoryGroup,,,,,,Lists the inventory of protocols the probe has the capability of monitoring and allows the addition, deletion, and configuration of entries in this list.
.1.3.6.1.2.1.16.20.2.2,RMON2-MIB::protocolDistributionGroup,,,,,,Collects the relative amounts of octets and packets for the different protocols detected on a network segment.
.1.3.6.1.2.1.16.20.2.3,RMON2-MIB::addressMapGroup,,,,,,Lists MAC address to network address bindings discovered by the probe and what interface they were last seen on.
.1.3.6.1.2.1.16.20.2.4,RMON2-MIB::nlHostGroup,,,,,,Counts the amount of traffic sent from and to each network address discovered by the probe. Note that while the hlHostControlTable also has objects that control an optional alHostTable, implementation of the alHostTable is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.5,RMON2-MIB::nlMatrixGroup,,,,,,Counts the amount of traffic sent between each pair of network addresses discovered by the probe. Note that while the hlMatrixControlTable also has objects that control optional alMatrixTables, implementation of the alMatrixTables is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.6,RMON2-MIB::alHostGroup,,,,,,Counts the amount of traffic, by protocol, sent from and to each network address discovered by the probe. Implementation of this group requires implementation of the Network-Layer Host Group.
.1.3.6.1.2.1.16.20.2.7,RMON2-MIB::alMatrixGroup,,,,,,Counts the amount of traffic, by protocol, sent between each pair of network addresses discovered by the probe. Implementation of this group requires implementation of the Network-Layer Matrix Group.
.1.3.6.1.2.1.16.20.2.8,RMON2-MIB::usrHistoryGroup,,,,,,The usrHistoryGroup provides user-defined collection of historical information from MIB objects on the probe.
.1.3.6.1.2.1.16.20.2.9,RMON2-MIB::probeInformationGroup,,,,,,This group describes various operating parameters of the probe and controls the local time of the probe.
.1.3.6.1.2.1.16.20.2.10,RMON2-MIB::probeConfigurationGroup,,,,,,This group controls the configuration of various operating parameters of the probe. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.2.11,RMON2-MIB::rmon1EnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.12,RMON2-MIB::rmon1EthernetEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.13,RMON2-MIB::rmon1TokenRingEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.8,RMON-MIB::rmonMibModule,,,,,,Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices.
.1.3.6.1.2.1.16.20.9,RMON-MIB::rmonCompliances,,,,,,
.1.3.6.1.2.1.16.20.9.1,RMON-MIB::rmonCompliance,,,,,,The requirements for conformance to the RMON MIB. At least one of the groups in this module must be implemented to conform to the RMON MIB. Implementations of this MIB must also implement the system group of MIB-II [16] and the IF-MIB [17].
.1.3.6.1.2.1.16.20.10,RMON-MIB::rmonGroups,,,,,,
.1.3.6.1.2.1.16.20.10.1,RMON-MIB::rmonEtherStatsGroup,,,,,,The RMON Ethernet Statistics Group.
.1.3.6.1.2.1.16.20.10.2,RMON-MIB::rmonHistoryControlGroup,,,,,,The RMON History Control Group.
.1.3.6.1.2.1.16.20.10.3,RMON-MIB::rmonEthernetHistoryGroup,,,,,,The RMON Ethernet History Group.
.1.3.6.1.2.1.16.20.10.4,RMON-MIB::rmonAlarmGroup,,,,,,The RMON Alarm Group.
.1.3.6.1.2.1.16.20.10.5,RMON-MIB::rmonHostGroup,,,,,,The RMON Host Group.
.1.3.6.1.2.1.16.20.10.6,RMON-MIB::rmonHostTopNGroup,,,,,,The RMON Host Top 'N' Group.
.1.3.6.1.2.1.16.20.10.7,RMON-MIB::rmonMatrixGroup,,,,,,The RMON Matrix Group.
.1.3.6.1.2.1.16.20.10.8,RMON-MIB::rmonFilterGroup,,,,,,The RMON Filter Group.
.1.3.6.1.2.1.16.20.10.9,RMON-MIB::rmonPacketCaptureGroup,,,,,,The RMON Packet Capture Group.
.1.3.6.1.2.1.16.20.10.10,RMON-MIB::rmonEventGroup,,,,,,The RMON Event Group.
.1.3.6.1.2.1.16.20.10.11,RMON-MIB::rmonNotificationGroup,,,,,,The RMON Notification Group.
.1.3.6.1.2.1.17,BRIDGE-MIB::dot1dBridge,,,,,,The Bridge MIB module for managing devices that support IEEE 802.1D. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4188; see the RFC itself for full legal notices.
.1.3.6.1.2.1.17.0,BRIDGE-MIB::dot1dNotifications,,,,,,
.1.3.6.1.2.1.17.0.1,BRIDGE-MIB::newRoot,,,,,,The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.
.1.3.6.1.2.1.17.0.2,BRIDGE-MIB::topologyChange,,,,,,A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.
.1.3.6.1.2.1.17.1,BRIDGE-MIB::dot1dBase,,,,,,
.1.3.6.1.2.1.17.1.1,BRIDGE-MIB::dot1dBaseBridgeAddress,OCTET,read-only,,current,,The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However, it is only required to be unique. When concatenated with dot1dStpPriority, a unique BridgeIdentifier is formed, which is used in the Spanning Tree Protocol.
.1.3.6.1.2.1.17.1.2,BRIDGE-MIB::dot1dBaseNumPorts,Integer32,read-only,,current,,The number of ports controlled by this bridging entity.
.1.3.6.1.2.1.17.1.3,BRIDGE-MIB::dot1dBaseType,INTEGER,read-only,,current,unknown(1):transparent-only(2):sourceroute-only(3):srt(4),Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging, this will be indicated by entries in the port table for the given type.
.1.3.6.1.2.1.17.1.4,BRIDGE-MIB::dot1dBasePortTable,,not-accessible,,current,,A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
.1.3.6.1.2.1.17.1.4.1,BRIDGE-MIB::dot1dBasePortEntry,,not-accessible,dot1dBasePort,current,,A list of information for each port of the bridge.
.1.3.6.1.2.1.17.1.4.1.1,BRIDGE-MIB::dot1dBasePort,Integer32,read-only,,current,,The port number of the port for which this entry contains bridge management information.
.1.3.6.1.2.1.17.1.4.1.2,BRIDGE-MIB::dot1dBasePortIfIndex,Integer32,read-only,,current,,The value of the instance of the ifIndex object, defined in IF-MIB, for the interface corresponding to this port.
.1.3.6.1.2.1.17.1.4.1.3,BRIDGE-MIB::dot1dBasePortCircuit,OBJECT,read-only,,current,,For a port that (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge. This object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one-to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }.
.1.3.6.1.2.1.17.1.4.1.4,BRIDGE-MIB::dot1dBasePortDelayExceededDiscards,Counter32,read-only,,current,,The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
.1.3.6.1.2.1.17.1.4.1.5,BRIDGE-MIB::dot1dBasePortMtuExceededDiscards,Counter32,read-only,,current,,The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
.1.3.6.1.2.1.17.2,BRIDGE-MIB::dot1dStp,,,,,,
.1.3.6.1.2.1.17.2.1,BRIDGE-MIB::dot1dStpProtocolSpecification,INTEGER,read-only,,current,unknown(1):decLb100(2):ieee8021d(3),An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1D implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol that are incompatible with the current version are released a new value will be defined.
.1.3.6.1.2.1.17.2.2,BRIDGE-MIB::dot1dStpPriority,Integer32,read-write,,current,,The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-61440, in steps of 4096.
.1.3.6.1.2.1.17.2.3,BRIDGE-MIB::dot1dStpTimeSinceTopologyChange,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this reports the time since the tcWhile timer for any port on this Bridge was nonzero.
.1.3.6.1.2.1.17.2.4,BRIDGE-MIB::dot1dStpTopChanges,Counter32,read-only,,current,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
.1.3.6.1.2.1.17.2.5,BRIDGE-MIB::dot1dStpDesignatedRoot,OCTET,read-only,,current,,The bridge identifier of the root of the spanning tree, as determined by the Spanning Tree Protocol, as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.2.1.17.2.6,BRIDGE-MIB::dot1dStpRootCost,Integer32,read-only,,current,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.2.1.17.2.7,BRIDGE-MIB::dot1dStpRootPort,Integer32,read-only,,current,,The port number of the port that offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.2.1.17.2.8,BRIDGE-MIB::dot1dStpMaxAge,Integer32,read-only,,current,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.2.1.17.2.9,BRIDGE-MIB::dot1dStpHelloTime,Integer32,read-only,,current,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.2.1.17.2.10,BRIDGE-MIB::dot1dStpHoldTime,Integer32,read-only,,current,,This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.2.1.17.2.11,BRIDGE-MIB::dot1dStpForwardDelay,Integer32,read-only,,current,,This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay, which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.2.1.17.2.12,BRIDGE-MIB::dot1dStpBridgeMaxAge,Integer32,read-write,,current,,The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.13,BRIDGE-MIB::dot1dStpBridgeHelloTime,Integer32,read-write,,current,,The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.14,BRIDGE-MIB::dot1dStpBridgeForwardDelay,Integer32,read-write,,current,,The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.15,BRIDGE-MIB::dot1dStpPortTable,,not-accessible,,current,,A table that contains port-specific information for the Spanning Tree Protocol.
.1.3.6.1.2.1.17.2.15.1,BRIDGE-MIB::dot1dStpPortEntry,,not-accessible,dot1dStpPort,current,,A list of information maintained by every port about the Spanning Tree Protocol state for that port.
.1.3.6.1.2.1.17.2.15.1.1,BRIDGE-MIB::dot1dStpPort,Integer32,read-only,,current,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.2.1.17.2.15.1.2,BRIDGE-MIB::dot1dStpPortPriority,Integer32,read-write,,current,,The value of the priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16.
.1.3.6.1.2.1.17.2.15.1.3,BRIDGE-MIB::dot1dStpPortState,INTEGER,read-only,,current,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6),The port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning, it will place that port into the broken(6) state. For ports that are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
.1.3.6.1.2.1.17.2.15.1.4,BRIDGE-MIB::dot1dStpPortEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled/disabled status of the port.
.1.3.6.1.2.1.17.2.15.1.5,BRIDGE-MIB::dot1dStpPortPathCost,Integer32,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. New implementations should support dot1dStpPortPathCost32. If the port path costs exceeds the maximum value of this object then this object should report the maximum value, namely 65535. Applications should try to read the dot1dStpPortPathCost32 object if this object reports the maximum value.
.1.3.6.1.2.1.17.2.15.1.6,BRIDGE-MIB::dot1dStpPortDesignatedRoot,OCTET,read-only,,current,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.2.1.17.2.15.1.7,BRIDGE-MIB::dot1dStpPortDesignatedCost,Integer32,read-only,,current,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.2.1.17.2.15.1.8,BRIDGE-MIB::dot1dStpPortDesignatedBridge,OCTET,read-only,,current,,The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.2.1.17.2.15.1.9,BRIDGE-MIB::dot1dStpPortDesignatedPort,OCTET,read-only,,current,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.2.1.17.2.15.1.10,BRIDGE-MIB::dot1dStpPortForwardTransitions,Counter32,read-only,,current,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.2.1.17.2.15.1.11,BRIDGE-MIB::dot1dStpPortPathCost32,Integer32,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. This object replaces dot1dStpPortPathCost to support IEEE 802.1t.
.1.3.6.1.2.1.17.3,BRIDGE-MIB::dot1dSr,,,,,,
.1.3.6.1.2.1.17.4,BRIDGE-MIB::dot1dTp,,,,,,
.1.3.6.1.2.1.17.4.1,BRIDGE-MIB::dot1dTpLearnedEntryDiscards,Counter32,read-only,,current,,The total number of Forwarding Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition that has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
.1.3.6.1.2.1.17.4.2,BRIDGE-MIB::dot1dTpAgingTime,Integer32,read-write,,current,,The timeout period in seconds for aging out dynamically-learned forwarding information. 802.1D-1998 recommends a default of 300 seconds.
.1.3.6.1.2.1.17.4.3,BRIDGE-MIB::dot1dTpFdbTable,,not-accessible,,current,,A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
.1.3.6.1.2.1.17.4.3.1,BRIDGE-MIB::dot1dTpFdbEntry,,not-accessible,dot1dTpFdbAddress,current,,Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
.1.3.6.1.2.1.17.4.3.1.1,BRIDGE-MIB::dot1dTpFdbAddress,OCTET,read-only,,current,,A unicast MAC address for which the bridge has forwarding and/or filtering information.
.1.3.6.1.2.1.17.4.3.1.2,BRIDGE-MIB::dot1dTpFdbPort,Integer32,read-only,,current,,Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned, but that the bridge does have some forwarding/filtering information about this address (e.g., in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).
.1.3.6.1.2.1.17.4.3.1.3,BRIDGE-MIB::dot1dTpFdbStatus,INTEGER,read-only,,current,other(1):invalid(2):learned(3):self(4):mgmt(5),The status of this entry. The meanings of the values are: other(1) - none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) - the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) - the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
.1.3.6.1.2.1.17.4.4,BRIDGE-MIB::dot1dTpPortTable,,not-accessible,,current,,A table that contains information about every port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.4.4.1,BRIDGE-MIB::dot1dTpPortEntry,,not-accessible,dot1dTpPort,current,,A list of information for each port of a transparent bridge.
.1.3.6.1.2.1.17.4.4.1.1,BRIDGE-MIB::dot1dTpPort,Integer32,read-only,,current,,The port number of the port for which this entry contains Transparent bridging management information.
.1.3.6.1.2.1.17.4.4.1.2,BRIDGE-MIB::dot1dTpPortMaxInfo,Integer32,read-only,,current,,The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
.1.3.6.1.2.1.17.4.4.1.3,BRIDGE-MIB::dot1dTpPortInFrames,Counter32,read-only,,current,,The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.4.1.4,BRIDGE-MIB::dot1dTpPortOutFrames,Counter32,read-only,,current,,The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.4.1.5,BRIDGE-MIB::dot1dTpPortInDiscards,Counter32,read-only,,current,,Count of received valid frames that were discarded (i.e., filtered) by the Forwarding Process.
.1.3.6.1.2.1.17.4.5,P-BRIDGE-MIB::dot1dTpHCPortTable,,not-accessible,,current,,A table that contains information about every high- capacity port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.4.5.1,P-BRIDGE-MIB::dot1dTpHCPortEntry,,not-accessible,dot1dTpPort,current,,Statistics information for each high-capacity port of a transparent bridge.
.1.3.6.1.2.1.17.4.5.1.1,P-BRIDGE-MIB::dot1dTpHCPortInFrames,Counter64,read-only,,current,,The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.5.1.2,P-BRIDGE-MIB::dot1dTpHCPortOutFrames,Counter64,read-only,,current,,The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.5.1.3,P-BRIDGE-MIB::dot1dTpHCPortInDiscards,Counter64,read-only,,current,,Count of valid frames that have been received by this port from its segment that were discarded (i.e., filtered) by the Forwarding Process.
.1.3.6.1.2.1.17.4.6,P-BRIDGE-MIB::dot1dTpPortOverflowTable,,not-accessible,,current,,A table that contains the most-significant bits of statistics counters for ports that are associated with this transparent bridge that are on high-capacity interfaces, as defined in the conformance clauses for this table. This table is provided as a way to read 64-bit counters for agents that support only SNMPv1. Note that the reporting of most-significant and least-significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
.1.3.6.1.2.1.17.4.6.1,P-BRIDGE-MIB::dot1dTpPortOverflowEntry,,not-accessible,dot1dTpPort,current,,The most significant bits of statistics counters for a high- capacity interface of a transparent bridge. Each object is associated with a corresponding object in dot1dTpPortTable that indicates the least significant bits of the counter.
.1.3.6.1.2.1.17.4.6.1.1,P-BRIDGE-MIB::dot1dTpPortInOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1dTpPortInFrames counter has overflowed.
.1.3.6.1.2.1.17.4.6.1.2,P-BRIDGE-MIB::dot1dTpPortOutOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1dTpPortOutFrames counter has overflowed.
.1.3.6.1.2.1.17.4.6.1.3,P-BRIDGE-MIB::dot1dTpPortInOverflowDiscards,Counter32,read-only,,current,,The number of times the associated dot1dTpPortInDiscards counter has overflowed.
.1.3.6.1.2.1.17.5,BRIDGE-MIB::dot1dStatic,,,,,,
.1.3.6.1.2.1.17.5.1,BRIDGE-MIB::dot1dStaticTable,,not-accessible,,current,,A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table, as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.
.1.3.6.1.2.1.17.5.1.1,BRIDGE-MIB::dot1dStaticEntry,,not-accessible,dot1dStaticAddress:dot1dStaticReceivePort,current,,Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.5.1.1.1,BRIDGE-MIB::dot1dStaticAddress,OCTET,read-create,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address, or the broadcast address.
.1.3.6.1.2.1.17.5.1.1.2,BRIDGE-MIB::dot1dStaticReceivePort,Integer32,read-create,,current,,Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
.1.3.6.1.2.1.17.5.1.1.3,BRIDGE-MIB::dot1dStaticAllowedToGoTo,OCTET,read-create,,current,,The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. The value of this object may exceed the required minimum maximum message size of some SNMP transport (484 bytes, in the case of SNMP over UDP, see RFC 3417, section 3.2). SNMP engines on bridges supporting a large number of ports must support appropriate maximum message sizes.
.1.3.6.1.2.1.17.5.1.1.4,BRIDGE-MIB::dot1dStaticStatus,INTEGER,read-create,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
.1.3.6.1.2.1.17.6,P-BRIDGE-MIB::pBridgeMIB,,,,,,The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998, including Restricted Group Registration defined by IEEE 802.1t-2001. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4363; See the RFC itself for full legal notices.
.1.3.6.1.2.1.17.6.1,P-BRIDGE-MIB::pBridgeMIBObjects,,,,,,
.1.3.6.1.2.1.17.6.1.1,P-BRIDGE-MIB::dot1dExtBase,,,,,,
.1.3.6.1.2.1.17.6.1.1.1,P-BRIDGE-MIB::dot1dDeviceCapabilities,BITS,read-only,,current,dot1dExtendedFilteringServices(0):dot1dTrafficClasses(1):dot1qStaticEntryIndividualPort(2):dot1qIVLCapable(3):dot1qSVLCapable(4):dot1qHybridCapable(5):dot1qConfigurablePvidTagging(6):dot1dLocalVlanCapable(7),Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities. dot1dExtendedFilteringServices(0), -- can perform filtering of -- individual multicast addresses -- controlled by GMRP. dot1dTrafficClasses(1), -- can map user priority to -- multiple traffic classes. dot1qStaticEntryIndividualPort(2), -- dot1qStaticUnicastReceivePort & -- dot1qStaticMulticastReceivePort -- can represent non-zero entries. dot1qIVLCapable(3), -- Independent VLAN Learning (IVL). dot1qSVLCapable(4), -- Shared VLAN Learning (SVL). dot1qHybridCapable(5), -- both IVL & SVL simultaneously. dot1qConfigurablePvidTagging(6), -- whether the implementation -- supports the ability to -- override the default PVID -- setting and its egress status -- (VLAN-Tagged or Untagged) on -- each port. dot1dLocalVlanCapable(7) -- can support multiple local -- bridges, outside of the scope -- of 802.1Q defined VLANs.
.1.3.6.1.2.1.17.6.1.1.2,P-BRIDGE-MIB::dot1dTrafficClassesEnabled,INTEGER,read-write,,current,true(1):false(2),The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.1.3,P-BRIDGE-MIB::dot1dGmrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs and on all ports, and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.1.4,P-BRIDGE-MIB::dot1dPortCapabilitiesTable,,not-accessible,,current,,A table that contains capabilities information about every port that is associated with this bridge.
.1.3.6.1.2.1.17.6.1.1.4.1,P-BRIDGE-MIB::dot1dPortCapabilitiesEntry,,not-accessible,,current,,A set of capabilities information about this port indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.1.4.1.1,P-BRIDGE-MIB::dot1dPortCapabilities,BITS,read-only,,current,dot1qDot1qTagging(0):dot1qConfigurableAcceptableFrameTypes(1):dot1qIngressFiltering(2),Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis, that are implemented by this device, and that are manageable through this MIB. dot1qDot1qTagging(0), -- supports 802.1Q VLAN tagging of -- frames and GVRP. dot1qConfigurableAcceptableFrameTypes(1), -- allows modified values of -- dot1qPortAcceptableFrameTypes. dot1qIngressFiltering(2) -- supports the discarding of any -- frame received on a Port whose -- VLAN classification does not -- include that Port in its Member -- set.
.1.3.6.1.2.1.17.6.1.2,P-BRIDGE-MIB::dot1dPriority,,,,,,
.1.3.6.1.2.1.17.6.1.2.1,P-BRIDGE-MIB::dot1dPortPriorityTable,,not-accessible,,current,,A table that contains information about every port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.6.1.2.1.1,P-BRIDGE-MIB::dot1dPortPriorityEntry,,not-accessible,,current,,A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.2.1.1.1,P-BRIDGE-MIB::dot1dPortDefaultUserPriority,Integer32,read-write,,current,,The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.1.1.2,P-BRIDGE-MIB::dot1dPortNumTrafficClasses,Integer32,read-write,,current,,The number of egress traffic classes supported on this port. This object may optionally be read-only. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.2,P-BRIDGE-MIB::dot1dUserPriorityRegenTable,,not-accessible,,current,,A list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Traffic Class Table for each input port. This only has effect on media that support native User Priority. The default values for Regenerated User Priorities are the same as the User Priorities.
.1.3.6.1.2.1.17.6.1.2.2.1,P-BRIDGE-MIB::dot1dUserPriorityRegenEntry,,not-accessible,dot1dBasePort:dot1dUserPriority,current,,A mapping of incoming User Priority to a Regenerated User Priority.
.1.3.6.1.2.1.17.6.1.2.2.1.1,P-BRIDGE-MIB::dot1dUserPriority,Integer32,not-accessible,,current,,The User Priority for a frame received on this port.
.1.3.6.1.2.1.17.6.1.2.2.1.2,P-BRIDGE-MIB::dot1dRegenUserPriority,Integer32,read-write,,current,,The Regenerated User Priority that the incoming User Priority is mapped to for this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.3,P-BRIDGE-MIB::dot1dTrafficClassTable,,not-accessible,,current,,A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).
.1.3.6.1.2.1.17.6.1.2.3.1,P-BRIDGE-MIB::dot1dTrafficClassEntry,,not-accessible,dot1dBasePort:dot1dTrafficClassPriority,current,,User Priority to Traffic Class mapping.
.1.3.6.1.2.1.17.6.1.2.3.1.1,P-BRIDGE-MIB::dot1dTrafficClassPriority,Integer32,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. For untagged frames received from non-Ethernet media, this value is equal to the dot1dRegenUserPriority value for the ingress port and media-specific user priority.
.1.3.6.1.2.1.17.6.1.2.3.1.2,P-BRIDGE-MIB::dot1dTrafficClass,Integer32,read-write,,current,,The Traffic Class the received frame is mapped to. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.4,P-BRIDGE-MIB::dot1dPortOutboundAccessPriorityTable,,not-accessible,,current,,A table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring.
.1.3.6.1.2.1.17.6.1.2.4.1,P-BRIDGE-MIB::dot1dPortOutboundAccessPriorityEntry,,not-accessible,dot1dBasePort:dot1dRegenUserPriority,current,,Regenerated User Priority to Outbound Access Priority mapping.
.1.3.6.1.2.1.17.6.1.2.4.1.1,P-BRIDGE-MIB::dot1dPortOutboundAccessPriority,Integer32,read-only,,current,,The Outbound Access Priority the received frame is mapped to.
.1.3.6.1.2.1.17.6.1.3,P-BRIDGE-MIB::dot1dGarp,,,,,,
.1.3.6.1.2.1.17.6.1.3.1,P-BRIDGE-MIB::dot1dPortGarpTable,,not-accessible,,current,,A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.3.1.1,P-BRIDGE-MIB::dot1dPortGarpEntry,,not-accessible,,current,,GARP control information for a bridge port.
.1.3.6.1.2.1.17.6.1.3.1.1.1,P-BRIDGE-MIB::dot1dPortGarpJoinTime,INTEGER,read-write,,current,,The GARP Join time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.3.1.1.2,P-BRIDGE-MIB::dot1dPortGarpLeaveTime,INTEGER,read-write,,current,,The GARP Leave time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.3.1.1.3,P-BRIDGE-MIB::dot1dPortGarpLeaveAllTime,INTEGER,read-write,,current,,The GARP LeaveAll time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.4,P-BRIDGE-MIB::dot1dGmrp,,,,,,
.1.3.6.1.2.1.17.6.1.4.1,P-BRIDGE-MIB::dot1dPortGmrpTable,,not-accessible,,current,,A table of GMRP control and status information about every bridge port. Augments the dot1dBasePortTable.
.1.3.6.1.2.1.17.6.1.4.1.1,P-BRIDGE-MIB::dot1dPortGmrpEntry,,not-accessible,,current,,GMRP control and status information for a bridge port.
.1.3.6.1.2.1.17.6.1.4.1.1.1,P-BRIDGE-MIB::dot1dPortGmrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates that GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded, and no GMRP registrations will be propagated from other ports. Setting this to a value of enabled(1) will be stored by the agent but will only take effect on the GMRP protocol operation if dot1dGmrpStatus also indicates the value enabled(1). This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.4.1.1.2,P-BRIDGE-MIB::dot1dPortGmrpFailedRegistrations,Counter32,read-only,,current,,The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.
.1.3.6.1.2.1.17.6.1.4.1.1.3,P-BRIDGE-MIB::dot1dPortGmrpLastPduOrigin,OCTET,read-only,,current,,The Source MAC Address of the last GMRP message received on this port.
.1.3.6.1.2.1.17.6.1.4.1.1.4,P-BRIDGE-MIB::dot1dPortRestrictedGroupRegistration,INTEGER,read-write,,current,true(1):false(2),The state of Restricted Group Registration on this port. If the value of this control is true(1), then creation of a new dynamic entry is permitted only if there is a Static Filtering Entry for the VLAN concerned, in which the Registrar Administrative Control value is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.2,P-BRIDGE-MIB::pBridgeConformance,,,,,,
.1.3.6.1.2.1.17.6.2.1,P-BRIDGE-MIB::pBridgeGroups,,,,,,
.1.3.6.1.2.1.17.6.2.1.1,P-BRIDGE-MIB::pBridgeExtCapGroup,,,,,,A collection of objects indicating the optional capabilities of the device.
.1.3.6.1.2.1.17.6.2.1.2,P-BRIDGE-MIB::pBridgeDeviceGmrpGroup,,,,,,A collection of objects providing device-level control for the Multicast Filtering extended bridge services.
.1.3.6.1.2.1.17.6.2.1.3,P-BRIDGE-MIB::pBridgeDevicePriorityGroup,,,,,,A collection of objects providing device-level control for the Priority services.
.1.3.6.1.2.1.17.6.2.1.4,P-BRIDGE-MIB::pBridgeDefaultPriorityGroup,,,,,,A collection of objects defining the User Priority applicable to each port for media that do not support native User Priority.
.1.3.6.1.2.1.17.6.2.1.5,P-BRIDGE-MIB::pBridgeRegenPriorityGroup,,,,,,A collection of objects defining the User Priorities applicable to each port for media that support native User Priority.
.1.3.6.1.2.1.17.6.2.1.6,P-BRIDGE-MIB::pBridgePriorityGroup,,,,,,A collection of objects defining the traffic classes within a bridge for each evaluated User Priority.
.1.3.6.1.2.1.17.6.2.1.7,P-BRIDGE-MIB::pBridgeAccessPriorityGroup,,,,,,A collection of objects defining the media-dependent outbound access level for each priority.
.1.3.6.1.2.1.17.6.2.1.8,P-BRIDGE-MIB::pBridgePortGarpGroup,,,,,,A collection of objects providing port level control and status information for GARP operation.
.1.3.6.1.2.1.17.6.2.1.9,P-BRIDGE-MIB::pBridgePortGmrpGroup,,,,,,A collection of objects providing port level control and status information for GMRP operation.
.1.3.6.1.2.1.17.6.2.1.10,P-BRIDGE-MIB::pBridgeHCPortGroup,,,,,,A collection of objects providing 64-bit statistics counters for high-capacity bridge ports.
.1.3.6.1.2.1.17.6.2.1.11,P-BRIDGE-MIB::pBridgePortOverflowGroup,,,,,,A collection of objects providing overflow statistics counters for high-capacity bridge ports.
.1.3.6.1.2.1.17.6.2.1.12,P-BRIDGE-MIB::pBridgePortGmrpGroup2,,,,,,A collection of objects providing port level control and status information for GMRP operation.
.1.3.6.1.2.1.17.6.2.2,P-BRIDGE-MIB::pBridgeCompliances,,,,,,
.1.3.6.1.2.1.17.6.2.2.1,P-BRIDGE-MIB::pBridgeCompliance,,,,,,The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
.1.3.6.1.2.1.17.6.2.2.2,P-BRIDGE-MIB::pBridgeCompliance2,,,,,,The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
.1.3.6.1.2.1.17.7,Q-BRIDGE-MIB::qBridgeMIB,,,,,,The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-2003, including Restricted Vlan Registration defined by IEEE 802.1u-2001 and Vlan Classification defined by IEEE 802.1v-2001. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4363; See the RFC itself for full legal notices.
.1.3.6.1.2.1.17.7.1,Q-BRIDGE-MIB::qBridgeMIBObjects,,,,,,
.1.3.6.1.2.1.17.7.1.1,Q-BRIDGE-MIB::dot1qBase,,,,,,
.1.3.6.1.2.1.17.7.1.1.1,Q-BRIDGE-MIB::dot1qVlanVersionNumber,INTEGER,read-only,,current,version1(1),The version number of IEEE 802.1Q that this device supports.
.1.3.6.1.2.1.17.7.1.1.2,Q-BRIDGE-MIB::dot1qMaxVlanId,Integer32,read-only,,current,,The maximum IEEE 802.1Q VLAN-ID that this device supports.
.1.3.6.1.2.1.17.7.1.1.3,Q-BRIDGE-MIB::dot1qMaxSupportedVlans,Unsigned32,read-only,,current,,The maximum number of IEEE 802.1Q VLANs that this device supports.
.1.3.6.1.2.1.17.7.1.1.4,Q-BRIDGE-MIB::dot1qNumVlans,Unsigned32,read-only,,current,,The current number of IEEE 802.1Q VLANs that are configured in this device.
.1.3.6.1.2.1.17.7.1.1.5,Q-BRIDGE-MIB::dot1qGvrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports, and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2,Q-BRIDGE-MIB::dot1qTp,,,,,,
.1.3.6.1.2.1.17.7.1.2.1,Q-BRIDGE-MIB::dot1qFdbTable,,not-accessible,,current,,A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the dot1qVlanCurrentTable.
.1.3.6.1.2.1.17.7.1.2.1.1,Q-BRIDGE-MIB::dot1qFdbEntry,,not-accessible,dot1qFdbId,current,,Information about a specific Filtering Database.
.1.3.6.1.2.1.17.7.1.2.1.1.1,Q-BRIDGE-MIB::dot1qFdbId,Unsigned32,not-accessible,,current,,The identity of this Filtering Database.
.1.3.6.1.2.1.17.7.1.2.1.1.2,Q-BRIDGE-MIB::dot1qFdbDynamicCount,Counter32,read-only,,current,,The current number of dynamic entries in this Filtering Database.
.1.3.6.1.2.1.17.7.1.2.2,Q-BRIDGE-MIB::dot1qTpFdbTable,,not-accessible,,current,,A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
.1.3.6.1.2.1.17.7.1.2.2.1,Q-BRIDGE-MIB::dot1qTpFdbEntry,,not-accessible,dot1qFdbId:dot1qTpFdbAddress,current,,Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
.1.3.6.1.2.1.17.7.1.2.2.1.1,Q-BRIDGE-MIB::dot1qTpFdbAddress,OCTET,not-accessible,,current,,A unicast MAC address for which the device has forwarding and/or filtering information.
.1.3.6.1.2.1.17.7.1.2.2.1.2,Q-BRIDGE-MIB::dot1qTpFdbPort,Integer32,read-only,,current,,Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g., in the dot1qStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of dot1qTpFdbStatus is not learned(3).
.1.3.6.1.2.1.17.7.1.2.2.1.3,Q-BRIDGE-MIB::dot1qTpFdbStatus,INTEGER,read-only,,current,other(1):invalid(2):learned(3):self(4):mgmt(5),The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1qTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of dot1qTpFdbAddress represents one of the device's addresses. The corresponding instance of dot1qTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress is also the value of an existing instance of dot1qStaticAddress.
.1.3.6.1.2.1.17.7.1.2.3,Q-BRIDGE-MIB::dot1qTpGroupTable,,not-accessible,,current,,A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learned dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.2.3.1,Q-BRIDGE-MIB::dot1qTpGroupEntry,,not-accessible,dot1qVlanIndex:dot1qTpGroupAddress,current,,Filtering information configured into the bridge by management, or learned dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address are allowed to be forwarded. The subset of these ports learned dynamically is also provided.
.1.3.6.1.2.1.17.7.1.2.3.1.1,Q-BRIDGE-MIB::dot1qTpGroupAddress,OCTET,not-accessible,,current,,The destination Group MAC address in a frame to which this entry's filtering information applies.
.1.3.6.1.2.1.17.7.1.2.3.1.2,Q-BRIDGE-MIB::dot1qTpGroupEgressPorts,OCTET,read-only,,current,,The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the dot1qForwardAllPorts list.
.1.3.6.1.2.1.17.7.1.2.3.1.3,Q-BRIDGE-MIB::dot1qTpGroupLearnt,OCTET,read-only,,current,,The subset of ports in dot1qTpGroupEgressPorts that were learned by GMRP or some other dynamic mechanism, in this Filtering database.
.1.3.6.1.2.1.17.7.1.2.4,Q-BRIDGE-MIB::dot1qForwardAllTable,,not-accessible,,current,,A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated.
.1.3.6.1.2.1.17.7.1.2.4.1,Q-BRIDGE-MIB::dot1qForwardAllEntry,,not-accessible,dot1qVlanIndex,current,,Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by GMRP.
.1.3.6.1.2.1.17.7.1.2.4.1.1,Q-BRIDGE-MIB::dot1qForwardAllPorts,OCTET,read-only,,current,,The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.
.1.3.6.1.2.1.17.7.1.2.4.1.2,Q-BRIDGE-MIB::dot1qForwardAllStaticPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.4.1.3,Q-BRIDGE-MIB::dot1qForwardAllForbiddenPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.5,Q-BRIDGE-MIB::dot1qForwardUnregisteredTable,,not-accessible,,current,,A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which no more specific forwarding information applies. This is configured statically by management and determined dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated.
.1.3.6.1.2.1.17.7.1.2.5.1,Q-BRIDGE-MIB::dot1qForwardUnregisteredEntry,,not-accessible,dot1qVlanIndex,current,,Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by GMRP.
.1.3.6.1.2.1.17.7.1.2.5.1.1,Q-BRIDGE-MIB::dot1qForwardUnregisteredPorts,OCTET,read-only,,current,,The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.
.1.3.6.1.2.1.17.7.1.2.5.1.2,Q-BRIDGE-MIB::dot1qForwardUnregisteredStaticPorts,OCTET,read-write,,current,,The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardUnregisteredPorts. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardUnregisteredForbiddenPorts. The default value is a string of zeros of appropriate length, although this has no effect with the default value of dot1qForwardAllStaticPorts. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.5.1.3,Q-BRIDGE-MIB::dot1qForwardUnregisteredForbiddenPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardUnregisteredStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3,Q-BRIDGE-MIB::dot1qStatic,,,,,,
.1.3.6.1.2.1.17.7.1.3.1,Q-BRIDGE-MIB::dot1qStaticUnicastTable,,not-accessible,,current,,A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only.
.1.3.6.1.2.1.17.7.1.3.1.1,Q-BRIDGE-MIB::dot1qStaticUnicastEntry,,not-accessible,dot1qFdbId:dot1qStaticUnicastAddress:dot1qStaticUnicastReceivePort,current,,Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.3.1.1.1,Q-BRIDGE-MIB::dot1qStaticUnicastAddress,OCTET,not-accessible,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
.1.3.6.1.2.1.17.7.1.3.1.1.2,Q-BRIDGE-MIB::dot1qStaticUnicastReceivePort,Integer32,not-accessible,,current,,Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
.1.3.6.1.2.1.17.7.1.3.1.1.3,Q-BRIDGE-MIB::dot1qStaticUnicastAllowedToGoTo,OCTET,read-write,,current,,The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports on which a specific unicast address may be dynamically learned. The dot1qTpFdbTable will have an equivalent entry with a dot1qTpFdbPort value of '0' until this address has been learned, at which point it will be updated with the port the address has been seen on. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. The default value of this object is a string of ones of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.1.1.4,Q-BRIDGE-MIB::dot1qStaticUnicastStatus,INTEGER,read-write,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2,Q-BRIDGE-MIB::dot1qStaticMulticastTable,,not-accessible,,current,,A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only.
.1.3.6.1.2.1.17.7.1.3.2.1,Q-BRIDGE-MIB::dot1qStaticMulticastEntry,,not-accessible,dot1qVlanIndex:dot1qStaticMulticastAddress:dot1qStaticMulticastReceivePort,current,,Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.3.2.1.1,Q-BRIDGE-MIB::dot1qStaticMulticastAddress,OCTET,not-accessible,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
.1.3.6.1.2.1.17.7.1.3.2.1.2,Q-BRIDGE-MIB::dot1qStaticMulticastReceivePort,Integer32,not-accessible,,current,,Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
.1.3.6.1.2.1.17.7.1.3.2.1.3,Q-BRIDGE-MIB::dot1qStaticMulticastStaticEgressPorts,OCTET,read-write,,current,,The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may not be added in this set if it is already a member of the set of ports in dot1qStaticMulticastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2.1.4,Q-BRIDGE-MIB::dot1qStaticMulticastForbiddenEgressPorts,OCTET,read-write,,current,,The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may not be added in this set if it is already a member of the set of ports in dot1qStaticMulticastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2.1.5,Q-BRIDGE-MIB::dot1qStaticMulticastStatus,INTEGER,read-write,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4,Q-BRIDGE-MIB::dot1qVlan,,,,,,
.1.3.6.1.2.1.17.7.1.4.1,Q-BRIDGE-MIB::dot1qVlanNumDeletes,Counter32,read-only,,current,,The number of times a VLAN entry has been deleted from the dot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2.
.1.3.6.1.2.1.17.7.1.4.2,Q-BRIDGE-MIB::dot1qVlanCurrentTable,,not-accessible,,current,,A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
.1.3.6.1.2.1.17.7.1.4.2.1,Q-BRIDGE-MIB::dot1qVlanCurrentEntry,,not-accessible,dot1qVlanTimeMark:dot1qVlanIndex,current,,Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
.1.3.6.1.2.1.17.7.1.4.2.1.1,Q-BRIDGE-MIB::dot1qVlanTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.17.7.1.4.2.1.2,Q-BRIDGE-MIB::dot1qVlanIndex,Unsigned32,not-accessible,,current,,The VLAN-ID or other identifier referring to this VLAN.
.1.3.6.1.2.1.17.7.1.4.2.1.3,Q-BRIDGE-MIB::dot1qVlanFdbId,Unsigned32,read-only,,current,,The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in dot1qLearningConstraintsTable.
.1.3.6.1.2.1.17.7.1.4.2.1.4,Q-BRIDGE-MIB::dot1qVlanCurrentEgressPorts,OCTET,read-only,,current,,The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.
.1.3.6.1.2.1.17.7.1.4.2.1.5,Q-BRIDGE-MIB::dot1qVlanCurrentUntaggedPorts,OCTET,read-only,,current,,The set of ports that are transmitting traffic for this VLAN as untagged frames.
.1.3.6.1.2.1.17.7.1.4.2.1.6,Q-BRIDGE-MIB::dot1qVlanStatus,INTEGER,read-only,,current,other(1):permanent(2):dynamicGvrp(3),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent dot1qVlanStaticTable entry and ports learned dynamically. dynamicGvrp(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN, and it will be removed when the last port leaves the VLAN.
.1.3.6.1.2.1.17.7.1.4.2.1.7,Q-BRIDGE-MIB::dot1qVlanCreationTime,TimeTicks,read-only,,current,,The value of sysUpTime when this VLAN was created.
.1.3.6.1.2.1.17.7.1.4.3,Q-BRIDGE-MIB::dot1qVlanStaticTable,,not-accessible,,current,,A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
.1.3.6.1.2.1.17.7.1.4.3.1,Q-BRIDGE-MIB::dot1qVlanStaticEntry,,not-accessible,dot1qVlanIndex,current,,Static information for a VLAN configured into the device by (local or network) management.
.1.3.6.1.2.1.17.7.1.4.3.1.1,Q-BRIDGE-MIB::dot1qVlanStaticName,OCTET,read-create,,current,,An administratively assigned string, which may be used to identify the VLAN.
.1.3.6.1.2.1.17.7.1.4.3.1.2,Q-BRIDGE-MIB::dot1qVlanStaticEgressPorts,OCTET,read-create,,current,,The set of ports that are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port, per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
.1.3.6.1.2.1.17.7.1.4.3.1.3,Q-BRIDGE-MIB::dot1qVlanForbiddenEgressPorts,OCTET,read-create,,current,,The set of ports that are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port, per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
.1.3.6.1.2.1.17.7.1.4.3.1.4,Q-BRIDGE-MIB::dot1qVlanStaticUntaggedPorts,OCTET,read-create,,current,,The set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
.1.3.6.1.2.1.17.7.1.4.3.1.5,Q-BRIDGE-MIB::dot1qVlanStaticRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.1.4.4,Q-BRIDGE-MIB::dot1qNextFreeLocalVlanIndex,Integer32,read-only,,current,,The next available value for dot1qVlanIndex of a local VLAN entry in dot1qVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index. Even if the value read is used, there is no guarantee that it will still be the valid index when the create operation is attempted; another manager may have already got in during the intervening time interval. In this case, dot1qNextFreeLocalVlanIndex should be re-read and the creation re-tried with the new value. This value will automatically change when the current value is used to create a new row.
.1.3.6.1.2.1.17.7.1.4.5,Q-BRIDGE-MIB::dot1qPortVlanTable,,not-accessible,,current,,A table containing per-port control and status information for VLAN configuration in the device.
.1.3.6.1.2.1.17.7.1.4.5.1,Q-BRIDGE-MIB::dot1qPortVlanEntry,,not-accessible,,current,,Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.7.1.4.5.1.1,Q-BRIDGE-MIB::dot1qPvid,Unsigned32,read-write,,current,,The PVID, the VLAN-ID assigned to untagged frames or Priority-Tagged frames received on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.2,Q-BRIDGE-MIB::dot1qPortAcceptableFrameTypes,INTEGER,read-write,,current,admitAll(1):admitOnlyVlanTagged(2),When this is admitOnlyVlanTagged(2), the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to a VID based on the PVID and VID Set for this port. This control does not affect VLAN-independent Bridge Protocol Data Unit (BPDU) frames, such as GVRP and Spanning Tree Protocol (STP). It does affect VLAN- dependent BPDU frames, such as GMRP. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.3,Q-BRIDGE-MIB::dot1qPortIngressFiltering,INTEGER,read-write,,current,true(1):false(2),When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN-independent BPDU frames, such as GVRP and STP. It does affect VLAN- dependent BPDU frames, such as GMRP. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.4,Q-BRIDGE-MIB::dot1qPortGvrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded, and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.5,Q-BRIDGE-MIB::dot1qPortGvrpFailedRegistrations,Counter32,read-only,,current,,The total number of failed GVRP registrations, for any reason, on this port.
.1.3.6.1.2.1.17.7.1.4.5.1.6,Q-BRIDGE-MIB::dot1qPortGvrpLastPduOrigin,OCTET,read-only,,current,,The Source MAC Address of the last GVRP message received on this port.
.1.3.6.1.2.1.17.7.1.4.5.1.7,Q-BRIDGE-MIB::dot1qPortRestrictedVlanRegistration,INTEGER,read-write,,current,true(1):false(2),The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Administrative Control value for this port is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.6,Q-BRIDGE-MIB::dot1qPortVlanStatisticsTable,,not-accessible,,current,,A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high-capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents that support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
.1.3.6.1.2.1.17.7.1.4.6.1,Q-BRIDGE-MIB::dot1qPortVlanStatisticsEntry,,not-accessible,dot1dBasePort:dot1qVlanIndex,current,,Traffic statistics for a VLAN on an interface.
.1.3.6.1.2.1.17.7.1.4.6.1.1,Q-BRIDGE-MIB::dot1qTpVlanPortInFrames,Counter32,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received bridge management frames classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP.
.1.3.6.1.2.1.17.7.1.4.6.1.2,Q-BRIDGE-MIB::dot1qTpVlanPortOutFrames,Counter32,read-only,,current,,The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.6.1.3,Q-BRIDGE-MIB::dot1qTpVlanPortInDiscards,Counter32,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering.
.1.3.6.1.2.1.17.7.1.4.6.1.4,Q-BRIDGE-MIB::dot1qTpVlanPortInOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortInFrames counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.6.1.5,Q-BRIDGE-MIB::dot1qTpVlanPortOutOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortOutFrames counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.6.1.6,Q-BRIDGE-MIB::dot1qTpVlanPortInOverflowDiscards,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortInDiscards counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.7,Q-BRIDGE-MIB::dot1qPortVlanHCStatisticsTable,,not-accessible,,current,,A table containing per-port, per-VLAN statistics for traffic on high-capacity interfaces.
.1.3.6.1.2.1.17.7.1.4.7.1,Q-BRIDGE-MIB::dot1qPortVlanHCStatisticsEntry,,not-accessible,dot1dBasePort:dot1qVlanIndex,current,,Traffic statistics for a VLAN on a high-capacity interface.
.1.3.6.1.2.1.17.7.1.4.7.1.1,Q-BRIDGE-MIB::dot1qTpVlanPortHCInFrames,Counter64,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received bridge management frames classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.7.1.2,Q-BRIDGE-MIB::dot1qTpVlanPortHCOutFrames,Counter64,read-only,,current,,The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.7.1.3,Q-BRIDGE-MIB::dot1qTpVlanPortHCInDiscards,Counter64,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering.
.1.3.6.1.2.1.17.7.1.4.8,Q-BRIDGE-MIB::dot1qLearningConstraintsTable,,not-accessible,,current,,A table containing learning constraints for sets of Shared and Independent VLANs.
.1.3.6.1.2.1.17.7.1.4.8.1,Q-BRIDGE-MIB::dot1qLearningConstraintsEntry,,not-accessible,dot1qConstraintVlan:dot1qConstraintSet,current,,A learning constraint defined for a VLAN.
.1.3.6.1.2.1.17.7.1.4.8.1.1,Q-BRIDGE-MIB::dot1qConstraintVlan,Unsigned32,not-accessible,,current,,The index of the row in dot1qVlanCurrentTable for the VLAN constrained by this entry.
.1.3.6.1.2.1.17.7.1.4.8.1.2,Q-BRIDGE-MIB::dot1qConstraintSet,Integer32,not-accessible,,current,,The identity of the constraint set to which dot1qConstraintVlan belongs. These values may be chosen by the management station.
.1.3.6.1.2.1.17.7.1.4.8.1.3,Q-BRIDGE-MIB::dot1qConstraintType,INTEGER,read-create,,current,independent(1):shared(2),The type of constraint this entry defines. independent(1) - the VLAN, dot1qConstraintVlan, uses a filtering database independent from all other VLANs in the same set, defined by dot1qConstraintSet. shared(2) - the VLAN, dot1qConstraintVlan, shares the same filtering database as all other VLANs in the same set, defined by dot1qConstraintSet.
.1.3.6.1.2.1.17.7.1.4.8.1.4,Q-BRIDGE-MIB::dot1qConstraintStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.
.1.3.6.1.2.1.17.7.1.4.9,Q-BRIDGE-MIB::dot1qConstraintSetDefault,Integer32,read-write,,current,,The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.10,Q-BRIDGE-MIB::dot1qConstraintTypeDefault,INTEGER,read-write,,current,independent(1):shared(2),The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable. The types are as defined for dot1qConstraintType. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.5,Q-BRIDGE-MIB::dot1vProtocol,,,,,,
.1.3.6.1.2.1.17.7.1.5.1,Q-BRIDGE-MIB::dot1vProtocolGroupTable,,not-accessible,,current,,A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification.
.1.3.6.1.2.1.17.7.1.5.1.1,Q-BRIDGE-MIB::dot1vProtocolGroupEntry,,not-accessible,dot1vProtocolTemplateFrameType:dot1vProtocolTemplateProtocolValue,current,,A mapping from a Protocol Template to a Protocol Group Identifier.
.1.3.6.1.2.1.17.7.1.5.1.1.1,Q-BRIDGE-MIB::dot1vProtocolTemplateFrameType,INTEGER,not-accessible,,current,ethernet(1):rfc1042(2):snap8021H(3):snapOther(4):llcOther(5),The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.
.1.3.6.1.2.1.17.7.1.5.1.1.2,Q-BRIDGE-MIB::dot1vProtocolTemplateProtocolValue,OCTET,not-accessible,,current,,The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
.1.3.6.1.2.1.17.7.1.5.1.1.3,Q-BRIDGE-MIB::dot1vProtocolGroupId,Integer32,read-create,,current,,Represents a group of protocols that are associated together when assigning a VID to a frame.
.1.3.6.1.2.1.17.7.1.5.1.1.4,Q-BRIDGE-MIB::dot1vProtocolGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.1.5.2,Q-BRIDGE-MIB::dot1vProtocolPortTable,,not-accessible,,current,,A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
.1.3.6.1.2.1.17.7.1.5.2.1,Q-BRIDGE-MIB::dot1vProtocolPortEntry,,not-accessible,dot1dBasePort:dot1vProtocolPortGroupId,current,,A VID set for a port.
.1.3.6.1.2.1.17.7.1.5.2.1.1,Q-BRIDGE-MIB::dot1vProtocolPortGroupId,Integer32,not-accessible,,current,,Designates a group of protocols in the Protocol Group Database.
.1.3.6.1.2.1.17.7.1.5.2.1.2,Q-BRIDGE-MIB::dot1vProtocolPortGroupVid,Integer32,read-create,,current,,The VID associated with a group of protocols for each port.
.1.3.6.1.2.1.17.7.1.5.2.1.3,Q-BRIDGE-MIB::dot1vProtocolPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.2,Q-BRIDGE-MIB::qBridgeConformance,,,,,,
.1.3.6.1.2.1.17.7.2.1,Q-BRIDGE-MIB::qBridgeGroups,,,,,,
.1.3.6.1.2.1.17.7.2.1.1,Q-BRIDGE-MIB::qBridgeBaseGroup,,,,,,A collection of objects providing device-level control and status information for the Virtual LAN bridge services.
.1.3.6.1.2.1.17.7.2.1.2,Q-BRIDGE-MIB::qBridgeFdbUnicastGroup,,,,,,A collection of objects providing information about all unicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.3,Q-BRIDGE-MIB::qBridgeFdbMulticastGroup,,,,,,A collection of objects providing information about all multicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.4,Q-BRIDGE-MIB::qBridgeServiceRequirementsGroup,,,,,,A collection of objects providing information about service requirements, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.5,Q-BRIDGE-MIB::qBridgeFdbStaticGroup,,,,,,A collection of objects providing information about unicast and multicast addresses statically configured by management, in each Filtering Database or VLAN.
.1.3.6.1.2.1.17.7.2.1.6,Q-BRIDGE-MIB::qBridgeVlanGroup,,,,,,A collection of objects providing information about all VLANs currently configured on this device.
.1.3.6.1.2.1.17.7.2.1.7,Q-BRIDGE-MIB::qBridgeVlanStaticGroup,,,,,,A collection of objects providing information about VLANs statically configured by management.
.1.3.6.1.2.1.17.7.2.1.8,Q-BRIDGE-MIB::qBridgePortGroup,,,,,,A collection of objects providing port-level VLAN control and status information for all ports.
.1.3.6.1.2.1.17.7.2.1.9,Q-BRIDGE-MIB::qBridgeVlanStatisticsGroup,,,,,,A collection of objects providing per-port packet statistics for all VLANs currently configured on this device.
.1.3.6.1.2.1.17.7.2.1.10,Q-BRIDGE-MIB::qBridgeVlanStatisticsOverflowGroup,,,,,,A collection of objects providing overflow counters for per-port packet statistics for all VLANs currently configured on this device for high-capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 650,000,000 bits/second.
.1.3.6.1.2.1.17.7.2.1.11,Q-BRIDGE-MIB::qBridgeVlanHCStatisticsGroup,,,,,,A collection of objects providing per-port packet statistics for all VLANs currently configured on this device for high-capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 650,000,000 bits/second.
.1.3.6.1.2.1.17.7.2.1.12,Q-BRIDGE-MIB::qBridgeLearningConstraintsGroup,,,,,,A collection of objects defining the Filtering Database constraints all VLANs have with each other.
.1.3.6.1.2.1.17.7.2.1.13,Q-BRIDGE-MIB::qBridgeLearningConstraintDefaultGroup,,,,,,A collection of objects defining the default Filtering Database constraints for VLANs that have no specific constraints defined.
.1.3.6.1.2.1.17.7.2.1.14,Q-BRIDGE-MIB::qBridgeClassificationDeviceGroup,,,,,,VLAN classification information for the bridge.
.1.3.6.1.2.1.17.7.2.1.15,Q-BRIDGE-MIB::qBridgeClassificationPortGroup,,,,,,VLAN classification information for individual ports.
.1.3.6.1.2.1.17.7.2.1.16,Q-BRIDGE-MIB::qBridgePortGroup2,,,,,,A collection of objects providing port-level VLAN control and status information for all ports.
.1.3.6.1.2.1.17.7.2.2,Q-BRIDGE-MIB::qBridgeCompliances,,,,,,
.1.3.6.1.2.1.17.7.2.2.1,Q-BRIDGE-MIB::qBridgeCompliance,,,,,,The compliance statement for device support of Virtual LAN Bridge services. RFC2674 was silent about the expected persistence of the read-write objects in this MIB module. Applications MUST NOT assume that the values of the read-write objects are persistent across reinitializations of the management system and MUST NOT assume that the values are not persistent across reinitializations of the management system.
.1.3.6.1.2.1.17.7.2.2.2,Q-BRIDGE-MIB::qBridgeCompliance2,,,,,,The compliance statement for device support of Virtual LAN Bridge services. This document clarifies the persistence requirements for the read-write objects in this MIB module. All implementations claiming compliance to qBridgeCompliance2 MUST retain the values of those read-write objects that specify this requirement.
.1.3.6.1.2.1.17.8,BRIDGE-MIB::dot1dConformance,,,,,,
.1.3.6.1.2.1.17.8.1,BRIDGE-MIB::dot1dGroups,,,,,,
.1.3.6.1.2.1.17.8.1.1,BRIDGE-MIB::dot1dBaseBridgeGroup,,,,,,Bridge level information for this device.
.1.3.6.1.2.1.17.8.1.2,BRIDGE-MIB::dot1dBasePortGroup,,,,,,Information for each port on this device.
.1.3.6.1.2.1.17.8.1.3,BRIDGE-MIB::dot1dStpBridgeGroup,,,,,,Bridge level Spanning Tree data for this device.
.1.3.6.1.2.1.17.8.1.4,BRIDGE-MIB::dot1dStpPortGroup,,,,,,Spanning Tree data for each port on this device.
.1.3.6.1.2.1.17.8.1.5,BRIDGE-MIB::dot1dStpPortGroup2,,,,,,Spanning Tree data for each port on this device.
.1.3.6.1.2.1.17.8.1.6,BRIDGE-MIB::dot1dStpPortGroup3,,,,,,Spanning Tree data for devices supporting 32-bit path costs.
.1.3.6.1.2.1.17.8.1.7,BRIDGE-MIB::dot1dTpBridgeGroup,,,,,,Bridge level Transparent Bridging data.
.1.3.6.1.2.1.17.8.1.8,BRIDGE-MIB::dot1dTpFdbGroup,,,,,,Filtering Database information for the Bridge.
.1.3.6.1.2.1.17.8.1.9,BRIDGE-MIB::dot1dTpGroup,,,,,,Dynamic Filtering Database information for each port of the Bridge.
.1.3.6.1.2.1.17.8.1.10,BRIDGE-MIB::dot1dStaticGroup,,,,,,Static Filtering Database information for each port of the Bridge.
.1.3.6.1.2.1.17.8.1.11,BRIDGE-MIB::dot1dNotificationGroup,,,,,,Group of objects describing notifications (traps).
.1.3.6.1.2.1.17.8.2,BRIDGE-MIB::dot1dCompliances,,,,,,
.1.3.6.1.2.1.17.8.2.1,BRIDGE-MIB::bridgeCompliance1493,,,,,,The compliance statement for device support of bridging services, as per RFC1493.
.1.3.6.1.2.1.17.8.2.2,BRIDGE-MIB::bridgeCompliance4188,,,,,,The compliance statement for device support of bridging services. This supports 32-bit Path Cost values and the more restricted bridge and port priorities, as per IEEE 802.1t. Full support for the 802.1D management objects requires that the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as well as the IF-MIB [RFC2863] objects ifIndex, ifType, ifDescr, ifPhysAddress, and ifLastChange are implemented.
.1.3.6.1.2.1.23,RFC1389-MIB::rip2,,,,,,
.1.3.6.1.2.1.23.1,RFC1389-MIB::rip2GlobalGroup,,,,,,
.1.3.6.1.2.1.23.1.1,RFC1389-MIB::rip2GlobalRouteChanges,Counter32,read-only,,mandatory,,The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
.1.3.6.1.2.1.23.1.2,RFC1389-MIB::rip2GlobalQueries,Counter32,read-only,,mandatory,,The number of responses sent to RIP queries from other systems.
.1.3.6.1.2.1.23.2,RFC1389-MIB::rip2IfStatTable,,not-accessible,,mandatory,,A list of subnets which require separate status monitoring in RIP.
.1.3.6.1.2.1.23.2.1,RFC1389-MIB::rip2IfStatEntry,,not-accessible,rip2IfStatAddress,mandatory,,A Single Routing Domain in a single Subnet.
.1.3.6.1.2.1.23.2.1.1,RFC1389-MIB::rip2IfStatAddress,IpAddress,read-only,,mandatory,,The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
.1.3.6.1.2.1.23.2.1.2,RFC1389-MIB::rip2IfStatRcvBadPackets,Counter32,read-only,,mandatory,,The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).
.1.3.6.1.2.1.23.2.1.3,RFC1389-MIB::rip2IfStatRcvBadRoutes,Counter32,read-only,,mandatory,,The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
.1.3.6.1.2.1.23.2.1.4,RFC1389-MIB::rip2IfStatSentUpdates,Counter32,read-only,,mandatory,,The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
.1.3.6.1.2.1.23.2.1.5,RFC1389-MIB::rip2IfStatStatus,INTEGER,read-write,,mandatory,valid(1):invalid(2),Writing invalid has the effect of deleting this interface.
.1.3.6.1.2.1.23.3,RFC1389-MIB::rip2IfConfTable,,not-accessible,,mandatory,,A list of subnets which require separate configuration in RIP.
.1.3.6.1.2.1.23.3.1,RFC1389-MIB::rip2IfConfEntry,,not-accessible,rip2IfConfAddress,mandatory,,A Single Routing Domain in a single Subnet.
.1.3.6.1.2.1.23.3.1.1,RFC1389-MIB::rip2IfConfAddress,IpAddress,read-only,,mandatory,,The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
.1.3.6.1.2.1.23.3.1.2,RFC1389-MIB::rip2IfConfDomain,OCTET,read-write,,deprecated,,Value inserted into the Routing Domain field of all RIP packets sent on this interface.
.1.3.6.1.2.1.23.3.1.3,RFC1389-MIB::rip2IfConfAuthType,INTEGER,read-write,,mandatory,noAuthentication(1):simplePassword(2):md5(3),The type of Authentication used on this interface.
.1.3.6.1.2.1.23.3.1.4,RFC1389-MIB::rip2IfConfAuthKey,OCTET,read-write,,mandatory,,The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has the value simplePassword word. A modification of the corresponding instance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
.1.3.6.1.2.1.23.3.1.5,RFC1389-MIB::rip2IfConfSend,INTEGER,read-write,,mandatory,doNotSend(1):ripVersion1(2):rip1Compatible(3):ripVersion2(4):ripV1Demand(5):ripV2Demand(6),What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules.
.1.3.6.1.2.1.23.3.1.6,RFC1389-MIB::rip2IfConfReceive,INTEGER,read-write,,mandatory,rip1(1):rip2(2):rip1OrRip2(3):doNotRecieve(4),This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
.1.3.6.1.2.1.23.3.1.7,RFC1389-MIB::rip2IfConfDefaultMetric,INTEGER,read-write,,mandatory,,This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be propagated.
.1.3.6.1.2.1.23.3.1.8,RFC1389-MIB::rip2IfConfStatus,INTEGER,read-write,,mandatory,valid(1):invalid(2),Writing invalid has the effect of deleting this interface.
.1.3.6.1.2.1.23.3.1.9,RFC1389-MIB::rip2IfConfSrcAddress,IpAddress,read-write,,mandatory,,The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On unnumbered interfaces, it must be the value of rip2IfConfAddress for some interface on the system.
.1.3.6.1.2.1.23.4,RFC1389-MIB::rip2PeerTable,,not-accessible,,mandatory,,A list of RIP Peers.
.1.3.6.1.2.1.23.4.1,RFC1389-MIB::rip2PeerEntry,,not-accessible,rip2PeerAddress:rip2PeerDomain,mandatory,,Information regarding a single routing peer.
.1.3.6.1.2.1.23.4.1.1,RFC1389-MIB::rip2PeerAddress,IpAddress,read-only,,mandatory,,The IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system.
.1.3.6.1.2.1.23.4.1.2,RFC1389-MIB::rip2PeerDomain,OCTET,read-only,,mandatory,,The value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero.
.1.3.6.1.2.1.23.4.1.3,RFC1389-MIB::rip2PeerLastUpdate,TimeTicks,read-only,,mandatory,,The value of sysUpTime when the most recent RIP update was received from this system.
.1.3.6.1.2.1.23.4.1.4,RFC1389-MIB::rip2PeerVersion,INTEGER,read-only,,mandatory,,The RIP version number in the header of the last RIP packet received.
.1.3.6.1.2.1.23.4.1.5,RFC1389-MIB::rip2PeerRcvBadPackets,Counter32,read-only,,mandatory,,The number of RIP response packets from this peer discarded as invalid.
.1.3.6.1.2.1.23.4.1.6,RFC1389-MIB::rip2PeerRcvBadRoutes,Counter32,read-only,,mandatory,,The number of routes from this peer that were ignored because the entry format was invalid.
.1.3.6.1.2.1.26,IANA-MAU-MIB::snmpDot3MauMgt,,,,,,
.1.3.6.1.2.1.26.0,MAU-MIB::snmpDot3MauTraps,,,,,,
.1.3.6.1.2.1.26.0.1,MAU-MIB::rpMauJabberTrap,,,,,,This trap is sent whenever a managed repeater MAU enters the jabber state. The agent MUST throttle the generation of consecutive rpMauJabberTraps so that there is at least a five-second gap between them.
.1.3.6.1.2.1.26.0.2,MAU-MIB::ifMauJabberTrap,,,,,,This trap is sent whenever a managed interface MAU enters the jabber state. The agent MUST throttle the generation of consecutive ifMauJabberTraps so that there is at least a five-second gap between them.
.1.3.6.1.2.1.26.1,MAU-MIB::dot3RpMauBasicGroup,,,,,,
.1.3.6.1.2.1.26.1.1,MAU-MIB::rpMauTable,,not-accessible,,current,,Table of descriptive and status information about the MAU(s) attached to the ports of a repeater.
.1.3.6.1.2.1.26.1.1.1,MAU-MIB::rpMauEntry,,not-accessible,rpMauGroupIndex:rpMauPortIndex:rpMauIndex,current,,An entry in the table, containing information about a single MAU.
.1.3.6.1.2.1.26.1.1.1.1,MAU-MIB::rpMauGroupIndex,Integer32,read-only,,current,,This variable uniquely identifies the group containing the port to which the MAU described by this entry is connected. Note: In practice, a group will generally be a field-replaceable unit (i.e., module, card, or board) that can fit in the physical system enclosure, and the group number will correspond to a number marked on the physical enclosure. The group denoted by a particular value of this object is the same as the group denoted by the same value of rptrGroupIndex.
.1.3.6.1.2.1.26.1.1.1.2,MAU-MIB::rpMauPortIndex,Integer32,read-only,,current,,This variable uniquely identifies the repeater port within group rpMauGroupIndex to which the MAU described by this entry is connected.
.1.3.6.1.2.1.26.1.1.1.3,MAU-MIB::rpMauIndex,Integer32,read-only,,current,,This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same port (rpMauPortIndex).
.1.3.6.1.2.1.26.1.1.1.4,MAU-MIB::rpMauType,OBJECT,read-only,,current,,This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB module, as OBJECT-IDENTITIES of dot3MauType. If the MAU type is unknown, the object identifier zeroDotZero is returned.
.1.3.6.1.2.1.26.1.1.1.5,MAU-MIB::rpMauStatus,INTEGER,read-write,,current,other(1):unknown(2):operational(3):standby(4):shutdown(5):reset(6),The current state of the MAU. This object MAY be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle, and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of rpMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU MAY return other(1) value for the rpMauJabberState and rpMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state.
.1.3.6.1.2.1.26.1.1.1.6,MAU-MIB::rpMauMediaAvailable,INTEGER,read-only,,current,other(1):unknown(2):available(3):notAvailable(4):remoteFault(5):invalidSignal(6):remoteJabber(7):remoteLinkLoss(8):remoteTest(9):offline(10):autoNegError(11):pmdLinkFault(12):wisFrameLoss(13):wisSignalLoss(14):pcsLinkFault(15):excessiveBER(16):dxsLinkFault(17):pxsLinkFault(18):availableReduced(19):ready(20),This object identifies Media Available state of the MAU, complementary to the rpMauStatus. Values for the standard IEEE 802.3 Media Available states are defined in the IANA maintained IANA-MAU-MIB module, as IANAifMauMediaAvailable TC.
.1.3.6.1.2.1.26.1.1.1.7,MAU-MIB::rpMauMediaAvailableStateExits,Counter32,read-only,,current,,A count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of rptrMonitorPortLastChange.
.1.3.6.1.2.1.26.1.1.1.8,MAU-MIB::rpMauJabberState,INTEGER,read-only,,current,other(1):unknown(2):noJabber(3):jabbering(4),The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent MUST always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. If the MAU is not jabbering the agent returns noJabber(3). This is the 'normal' state. If the MAU is in jabber state the agent returns the jabbering(4) value.
.1.3.6.1.2.1.26.1.1.1.9,MAU-MIB::rpMauJabberingStateEnters,Counter32,read-only,,current,,A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). For MAUs of type dot3MauTypeAUI, dot3MauType100BaseT4, dot3MauType100BaseTX, dot3MauType100BaseFX, and all 1000Mbps types, this counter will always indicate zero. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of rptrMonitorPortLastChange.
.1.3.6.1.2.1.26.1.1.1.10,MAU-MIB::rpMauFalseCarriers,Counter32,read-only,,current,,A count of the number of false carrier events during IDLE in 100BASE-X links. This counter does not increment at the symbol rate. It can increment after a valid carrier completion at a maximum rate of once per 100 ms until the next carrier event. This counter increments only for MAUs of type dot3MauType100BaseT4, dot3MauType100BaseTX, dot3MauType100BaseFX, and all 1000Mbps types. For all other MAU types, this counter will always indicate zero. The approximate minimum time for rollover of this counter is 7.4 hours. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of rptrMonitorPortLastChange.
.1.3.6.1.2.1.26.1.2,MAU-MIB::rpJackTable,,not-accessible,,current,,Information about the external jacks attached to MAUs attached to the ports of a repeater.
.1.3.6.1.2.1.26.1.2.1,MAU-MIB::rpJackEntry,,not-accessible,rpMauGroupIndex:rpMauPortIndex:rpMauIndex:rpJackIndex,current,,An entry in the table, containing information about a particular jack.
.1.3.6.1.2.1.26.1.2.1.1,MAU-MIB::rpJackIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the jack described by this entry from among other jacks attached to the same MAU (rpMauIndex).
.1.3.6.1.2.1.26.1.2.1.2,MAU-MIB::rpJackType,INTEGER,read-only,,current,other(1):rj45(2):rj45S(3):db9(4):bnc(5):fAUI(6):mAUI(7):fiberSC(8):fiberMIC(9):fiberST(10):telco(11):mtrj(12):hssdc(13):fiberLC(14):cx4(15):sfpPlusDA(16),The jack connector type, as it appears on the outside of the system.
.1.3.6.1.2.1.26.2,MAU-MIB::dot3IfMauBasicGroup,,,,,,
.1.3.6.1.2.1.26.2.1,MAU-MIB::ifMauTable,,not-accessible,,current,,Table of descriptive and status information about MAU(s) attached to an interface.
.1.3.6.1.2.1.26.2.1.1,MAU-MIB::ifMauEntry,,not-accessible,ifMauIfIndex:ifMauIndex,current,,An entry in the table, containing information about a single MAU.
.1.3.6.1.2.1.26.2.1.1.1,MAU-MIB::ifMauIfIndex,Integer32,read-only,,current,,This variable uniquely identifies the interface to which the MAU described by this entry is connected.
.1.3.6.1.2.1.26.2.1.1.2,MAU-MIB::ifMauIndex,Integer32,read-only,,current,,This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same interface (ifMauIfIndex).
.1.3.6.1.2.1.26.2.1.1.3,MAU-MIB::ifMauType,OBJECT,read-only,,current,,This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB module, as OBJECT-IDENTITIES of dot3MauType. If the MAU type is unknown, the object identifier zeroDotZero is returned. This object represents the operational type of the MAU, as determined by either 1) the result of the auto-negotiation function or 2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object ifMauDefaultType. In case 2), a set to the object ifMauDefaultType will force the MAU into the new operating mode.
.1.3.6.1.2.1.26.2.1.1.4,MAU-MIB::ifMauStatus,INTEGER,read-write,,current,other(1):unknown(2):operational(3):standby(4):shutdown(5):reset(6),The current state of the MAU. This object MAY be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of ifMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU MAY return other(1) value for the ifMauJabberState and ifMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state.
.1.3.6.1.2.1.26.2.1.1.5,MAU-MIB::ifMauMediaAvailable,INTEGER,read-only,,current,other(1):unknown(2):available(3):notAvailable(4):remoteFault(5):invalidSignal(6):remoteJabber(7):remoteLinkLoss(8):remoteTest(9):offline(10):autoNegError(11):pmdLinkFault(12):wisFrameLoss(13):wisSignalLoss(14):pcsLinkFault(15):excessiveBER(16):dxsLinkFault(17):pxsLinkFault(18):availableReduced(19):ready(20),This object identifies Media Available state of the MAU, complementary to the ifMauStatus. Values for the standard IEEE 802.3 Media Available states are defined in the IANA maintained IANA-MAU-MIB module, as IANAifMauMediaAvailable TC.
.1.3.6.1.2.1.26.2.1.1.6,MAU-MIB::ifMauMediaAvailableStateExits,Counter32,read-only,,current,,A count of the number of times that ifMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.1.1.7,MAU-MIB::ifMauJabberState,INTEGER,read-only,,current,other(1):unknown(2):noJabber(3):jabbering(4),The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent MUST always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. If the MAU is not jabbering the agent returns noJabber(3). This is the 'normal' state. If the MAU is in jabber state the agent returns the jabbering(4) value.
.1.3.6.1.2.1.26.2.1.1.8,MAU-MIB::ifMauJabberingStateEnters,Counter32,read-only,,current,,A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). This counter will always indicate zero for MAUs of type dot3MauTypeAUI and those of speeds above 10Mbps. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.1.1.9,MAU-MIB::ifMauFalseCarriers,Counter32,read-only,,current,,A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this counter will always indicate zero. This counter does not increment at the symbol rate. It can increment after a valid carrier completion at a maximum rate of once per 100 ms for 100BASE-X and once per 10us for 1000BASE-X until the next CarrierEvent. This counter can roll over very quickly. A management station is advised to poll the ifMauHCFalseCarriers instead of this counter in order to avoid loss of information. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.1.1.10,MAU-MIB::ifMauTypeList,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauTypeListBits. A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could be. The value is a sum that initially takes the value zero. Then, for each type capability of this MAU, 2 raised to the power noted below is added to the sum. For example, a MAU that has the capability to be only 10BASE-T would have a value of 512 (2**9). In contrast, a MAU that supports both 10Base-T (full duplex) and 100BASE-TX (full duplex) would have a value of ((2**11) + (2**16)), or 67584. The powers of 2 assigned to the capabilities are these: Power Capability 0 other or unknown 1 AUI 2 10BASE-5 3 FOIRL 4 10BASE-2 5 10BASE-T duplex mode unknown 6 10BASE-FP 7 10BASE-FB 8 10BASE-FL duplex mode unknown 9 10BROAD36 10 10BASE-T half duplex mode 11 10BASE-T full duplex mode 12 10BASE-FL half duplex mode 13 10BASE-FL full duplex mode 14 100BASE-T4 15 100BASE-TX half duplex mode 16 100BASE-TX full duplex mode 17 100BASE-FX half duplex mode 18 100BASE-FX full duplex mode 19 100BASE-T2 half duplex mode 20 100BASE-T2 full duplex mode If auto-negotiation is present on this MAU, this object will map to ifMauAutoNegCapability.
.1.3.6.1.2.1.26.2.1.1.11,MAU-MIB::ifMauDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative baseband MAU type to be used in conjunction with the operational MAU type denoted by ifMauType. The set of possible values for this object is the same as the set defined for the ifMauType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. NOTE TO IMPLEMENTORS: It may be necessary to provide for underlying hardware implementations which do not follow the exact behavior specified above. In particular, when ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by this object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
.1.3.6.1.2.1.26.2.1.1.12,MAU-MIB::ifMauAutoNegSupported,INTEGER,read-only,,current,true(1):false(2),This object indicates whether or not auto-negotiation is supported on this MAU.
.1.3.6.1.2.1.26.2.1.1.13,MAU-MIB::ifMauTypeListBits,BITS,read-only,,current,bOther(0):bAUI(1):b10base5(2):bFoirl(3):b10base2(4):b10baseT(5):b10baseFP(6):b10baseFB(7):b10baseFL(8):b10broad36(9):b10baseTHD(10):b10baseTFD(11):b10baseFLHD(12):b10baseFLFD(13):b100baseT4(14):b100baseTXHD(15):b100baseTXFD(16):b100baseFXHD(17):b100baseFXFD(18):b100baseT2HD(19):b100baseT2FD(20):b1000baseXHD(21):b1000baseXFD(22):b1000baseLXHD(23):b1000baseLXFD(24):b1000baseSXHD(25):b1000baseSXFD(26):b1000baseCXHD(27):b1000baseCXFD(28):b1000baseTHD(29):b1000baseTFD(30):b10GbaseX(31):b10GbaseLX4(32):b10GbaseR(33):b10GbaseER(34):b10GbaseLR(35):b10GbaseSR(36):b10GbaseW(37):b10GbaseEW(38):b10GbaseLW(39):b10GbaseSW(40):b10GbaseCX4(41):b2BaseTL(42):b10PassTS(43):b100BaseBX10D(44):b100BaseBX10U(45):b100BaseLX10(46):b1000BaseBX10D(47):b1000BaseBX10U(48):b1000BaseLX10(49):b1000BasePX10D(50):b1000BasePX10U(51):b1000BasePX20D(52):b1000BasePX20U(53):b10GbaseT(54):b10GbaseLRM(55):b1000baseKX(56):b10GbaseKX4(57):b10GbaseKR(58):b10G1GbasePRXD1(59):b10G1GbasePRXD2(60):b10G1GbasePRXD3(61):b10G1GbasePRXU1(62):b10G1GbasePRXU2(63):b10G1GbasePRXU3(64):b10GbasePRD1(65):b10GbasePRD2(66):b10GbasePRD3(67):b10GbasePRU1(68):b10GbasePRU3(69):b40GbaseKR4(70):b40GbaseCR4(71):b40GbaseSR4(72):b40GbaseFR(73):b40GbaseLR4(74):b100GbaseCR10(75):b100GbaseSR10(76):b100GbaseLR4(77):b100GbaseER4(78):b1000baseT1(79):b1000basePX30D(80):b1000basePX30U(81):b1000basePX40D(82):b1000basePX40U(83):b10G1GbasePRXD4(84):b10G1GbasePRXU4(85):b10GbasePRD4(86):b10GbasePRU4(87):b25GbaseCR(88):b25GbaseCRS(89):b25GbaseKR(90):b25GbaseKRS(91):b25GbaseR(92):b25GbaseSR(93):b25GbaseT(94):b40GbaseER4(95):b40GbaseR(96):b40GbaseT(97):b100GbaseCR4(98):b100GbaseKR4(99):b100GbaseKP4(100):b100GbaseR(101):b100GbaseSR4(102),A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could be. If auto-negotiation is present on this MAU, this object will map to ifMauAutoNegCapabilityBits. Note that this MAU may be capable of operating as a MAU type that is beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauTypeListBits TC.
.1.3.6.1.2.1.26.2.1.1.14,MAU-MIB::ifMauHCFalseCarriers,Counter64,read-only,,current,,A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this counter will always indicate zero. This counter does not increment at the symbol rate. This counter is a 64-bit version of ifMauFalseCarriers. Since the 32-bit version of this counter can roll over very quickly, management stations are advised to poll the 64-bit version instead, in order to avoid loss of information. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.2,MAU-MIB::ifJackTable,,not-accessible,,current,,Information about the external jacks attached to MAUs attached to an interface.
.1.3.6.1.2.1.26.2.2.1,MAU-MIB::ifJackEntry,,not-accessible,ifMauIfIndex:ifMauIndex:ifJackIndex,current,,An entry in the table, containing information about a particular jack.
.1.3.6.1.2.1.26.2.2.1.1,MAU-MIB::ifJackIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the jack described by this entry from among other jacks attached to the same MAU.
.1.3.6.1.2.1.26.2.2.1.2,MAU-MIB::ifJackType,INTEGER,read-only,,current,other(1):rj45(2):rj45S(3):db9(4):bnc(5):fAUI(6):mAUI(7):fiberSC(8):fiberMIC(9):fiberST(10):telco(11):mtrj(12):hssdc(13):fiberLC(14):cx4(15):sfpPlusDA(16),The jack connector type, as it appears on the outside of the system.
.1.3.6.1.2.1.26.3,MAU-MIB::dot3BroadMauBasicGroup,,,,,,
.1.3.6.1.2.1.26.3.1,MAU-MIB::broadMauBasicTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This entire table has been deprecated. There have been no reported implementations of this table, and it is unlikely that there ever will be. IEEE recommends that broadband MAU types should not be used for new installations. Table of descriptive and status information about the broadband MAUs connected to interfaces.
.1.3.6.1.2.1.26.3.1.1,MAU-MIB::broadMauBasicEntry,,not-accessible,broadMauIfIndex:broadMauIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********** An entry in the table, containing information about a single broadband MAU.
.1.3.6.1.2.1.26.3.1.1.1,MAU-MIB::broadMauIfIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable uniquely identifies the interface to which the MAU described by this entry is connected.
.1.3.6.1.2.1.26.3.1.1.2,MAU-MIB::broadMauIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable uniquely identifies the MAU connected to interface broadMauIfIndex that is described by this entry.
.1.3.6.1.2.1.26.3.1.1.3,MAU-MIB::broadMauXmtRcvSplitType,INTEGER,read-only,,deprecated,other(1):single(2):dual(3),********* THIS OBJECT IS DEPRECATED ********** This object indicates the type of frequency multiplexing/cabling system used to separate the transmit and receive paths for the 10BROAD36 MAU. The value other(1) is returned if the split type is not either single or dual. The value single(2) indicates a single cable system. The value dual(3) indicates a dual cable system, offset normally zero.
.1.3.6.1.2.1.26.3.1.1.4,MAU-MIB::broadMauXmtCarrierFreq,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable indicates the transmit carrier frequency of the 10BROAD36 MAU in MHz/4; that is, in units of 250 kHz.
.1.3.6.1.2.1.26.3.1.1.5,MAU-MIB::broadMauTranslationFreq,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable indicates the translation offset frequency of the 10BROAD36 MAU in MHz/4; that is, in units of 250 kHz.
.1.3.6.1.2.1.26.4,IANA-MAU-MIB::dot3MauType,,,,,,
.1.3.6.1.2.1.26.4.1,IANA-MAU-MIB::dot3MauTypeAUI,,,,,,no internal MAU, view from AUI
.1.3.6.1.2.1.26.4.2,IANA-MAU-MIB::dot3MauType10Base5,,,,,,thick coax MAU
.1.3.6.1.2.1.26.4.3,IANA-MAU-MIB::dot3MauTypeFoirl,,,,,,FOIRL MAU
.1.3.6.1.2.1.26.4.4,IANA-MAU-MIB::dot3MauType10Base2,,,,,,thin coax MAU
.1.3.6.1.2.1.26.4.5,IANA-MAU-MIB::dot3MauType10BaseT,,,,,,UTP MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseTHD or dot3MauType10BaseTFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations.
.1.3.6.1.2.1.26.4.6,IANA-MAU-MIB::dot3MauType10BaseFP,,,,,,passive fiber MAU
.1.3.6.1.2.1.26.4.7,IANA-MAU-MIB::dot3MauType10BaseFB,,,,,,sync fiber MAU
.1.3.6.1.2.1.26.4.8,IANA-MAU-MIB::dot3MauType10BaseFL,,,,,,async fiber MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseFLHD or dot3MauType10BaseFLFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations.
.1.3.6.1.2.1.26.4.9,IANA-MAU-MIB::dot3MauType10Broad36,,,,,,broadband DTE MAU. Note that 10BROAD36 MAUs can be attached to interfaces but not to repeaters.
.1.3.6.1.2.1.26.4.10,IANA-MAU-MIB::dot3MauType10BaseTHD,,,,,,UTP MAU, half duplex mode
.1.3.6.1.2.1.26.4.11,IANA-MAU-MIB::dot3MauType10BaseTFD,,,,,,UTP MAU, full duplex mode
.1.3.6.1.2.1.26.4.12,IANA-MAU-MIB::dot3MauType10BaseFLHD,,,,,,async fiber MAU, half duplex mode
.1.3.6.1.2.1.26.4.13,IANA-MAU-MIB::dot3MauType10BaseFLFD,,,,,,async fiber MAU, full duplex mode
.1.3.6.1.2.1.26.4.14,IANA-MAU-MIB::dot3MauType100BaseT4,,,,,,4 pair category 3 UTP
.1.3.6.1.2.1.26.4.15,IANA-MAU-MIB::dot3MauType100BaseTXHD,,,,,,2 pair category 5 UTP, half duplex mode
.1.3.6.1.2.1.26.4.16,IANA-MAU-MIB::dot3MauType100BaseTXFD,,,,,,2 pair category 5 UTP, full duplex mode
.1.3.6.1.2.1.26.4.17,IANA-MAU-MIB::dot3MauType100BaseFXHD,,,,,,X fiber over PMT, half duplex mode
.1.3.6.1.2.1.26.4.18,IANA-MAU-MIB::dot3MauType100BaseFXFD,,,,,,X fiber over PMT, full duplex mode
.1.3.6.1.2.1.26.4.19,IANA-MAU-MIB::dot3MauType100BaseT2HD,,,,,,2 pair category 3 UTP, half duplex mode
.1.3.6.1.2.1.26.4.20,IANA-MAU-MIB::dot3MauType100BaseT2FD,,,,,,2 pair category 3 UTP, full duplex mode
.1.3.6.1.2.1.26.4.21,IANA-MAU-MIB::dot3MauType1000BaseXHD,,,,,,PCS/PMA, unknown PMD, half duplex mode
.1.3.6.1.2.1.26.4.22,IANA-MAU-MIB::dot3MauType1000BaseXFD,,,,,,PCS/PMA, unknown PMD, full duplex mode
.1.3.6.1.2.1.26.4.23,IANA-MAU-MIB::dot3MauType1000BaseLXHD,,,,,,Fiber over long-wavelength laser, half duplex mode
.1.3.6.1.2.1.26.4.24,IANA-MAU-MIB::dot3MauType1000BaseLXFD,,,,,,Fiber over long-wavelength laser, full duplex mode
.1.3.6.1.2.1.26.4.25,IANA-MAU-MIB::dot3MauType1000BaseSXHD,,,,,,Fiber over short-wavelength laser, half duplex mode
.1.3.6.1.2.1.26.4.26,IANA-MAU-MIB::dot3MauType1000BaseSXFD,,,,,,Fiber over short-wavelength laser, full duplex mode
.1.3.6.1.2.1.26.4.27,IANA-MAU-MIB::dot3MauType1000BaseCXHD,,,,,,Copper over 150-Ohm balanced cable, half duplex mode
.1.3.6.1.2.1.26.4.28,IANA-MAU-MIB::dot3MauType1000BaseCXFD,,,,,,Copper over 150-Ohm balanced cable, full duplex mode
.1.3.6.1.2.1.26.4.29,IANA-MAU-MIB::dot3MauType1000BaseTHD,,,,,,Four-pair Category 5 UTP, half duplex mode
.1.3.6.1.2.1.26.4.30,IANA-MAU-MIB::dot3MauType1000BaseTFD,,,,,,Four-pair Category 5 UTP, full duplex mode
.1.3.6.1.2.1.26.4.31,IANA-MAU-MIB::dot3MauType10GigBaseX,,,,,,X PCS/PMA, unknown PMD.
.1.3.6.1.2.1.26.4.32,IANA-MAU-MIB::dot3MauType10GigBaseLX4,,,,,,X fiber over WWDM optics
.1.3.6.1.2.1.26.4.33,IANA-MAU-MIB::dot3MauType10GigBaseR,,,,,,R PCS/PMA, unknown PMD.
.1.3.6.1.2.1.26.4.34,IANA-MAU-MIB::dot3MauType10GigBaseER,,,,,,R fiber over 1550 nm optics
.1.3.6.1.2.1.26.4.35,IANA-MAU-MIB::dot3MauType10GigBaseLR,,,,,,R fiber over 1310 nm optics
.1.3.6.1.2.1.26.4.36,IANA-MAU-MIB::dot3MauType10GigBaseSR,,,,,,R fiber over 850 nm optics
.1.3.6.1.2.1.26.4.37,IANA-MAU-MIB::dot3MauType10GigBaseW,,,,,,W PCS/PMA, unknown PMD.
.1.3.6.1.2.1.26.4.38,IANA-MAU-MIB::dot3MauType10GigBaseEW,,,,,,W fiber over 1550 nm optics
.1.3.6.1.2.1.26.4.39,IANA-MAU-MIB::dot3MauType10GigBaseLW,,,,,,W fiber over 1310 nm optics
.1.3.6.1.2.1.26.4.40,IANA-MAU-MIB::dot3MauType10GigBaseSW,,,,,,W fiber over 850 nm optics
.1.3.6.1.2.1.26.4.41,IANA-MAU-MIB::dot3MauType10GigBaseCX4,,,,,,X copper over 8 pair 100-Ohm balanced cable
.1.3.6.1.2.1.26.4.42,IANA-MAU-MIB::dot3MauType2BaseTL,,,,,,Voice grade UTP copper, up to 2700m, optional PAF
.1.3.6.1.2.1.26.4.43,IANA-MAU-MIB::dot3MauType10PassTS,,,,,,Voice grade UTP copper, up to 750m, optional PAF
.1.3.6.1.2.1.26.4.44,IANA-MAU-MIB::dot3MauType100BaseBX10D,,,,,,One single-mode fiber OLT, long wavelength, 10km
.1.3.6.1.2.1.26.4.45,IANA-MAU-MIB::dot3MauType100BaseBX10U,,,,,,One single-mode fiber ONU, long wavelength, 10km
.1.3.6.1.2.1.26.4.46,IANA-MAU-MIB::dot3MauType100BaseLX10,,,,,,Two single-mode fibers, long wavelength, 10km
.1.3.6.1.2.1.26.4.47,IANA-MAU-MIB::dot3MauType1000BaseBX10D,,,,,,One single-mode fiber OLT, long wavelength, 10km
.1.3.6.1.2.1.26.4.48,IANA-MAU-MIB::dot3MauType1000BaseBX10U,,,,,,One single-mode fiber ONU, long wavelength, 10km
.1.3.6.1.2.1.26.4.49,IANA-MAU-MIB::dot3MauType1000BaseLX10,,,,,,Two sigle-mode fiber, long wavelength, 10km
.1.3.6.1.2.1.26.4.50,IANA-MAU-MIB::dot3MauType1000BasePX10D,,,,,,One single-mode fiber EPON OLT, 10km
.1.3.6.1.2.1.26.4.51,IANA-MAU-MIB::dot3MauType1000BasePX10U,,,,,,One single-mode fiber EPON ONU, 10km
.1.3.6.1.2.1.26.4.52,IANA-MAU-MIB::dot3MauType1000BasePX20D,,,,,,One single-mode fiber EPON OLT, 20km
.1.3.6.1.2.1.26.4.53,IANA-MAU-MIB::dot3MauType1000BasePX20U,,,,,,One single-mode fiber EPON ONU, 20km
.1.3.6.1.2.1.26.4.54,IANA-MAU-MIB::dot3MauType10GbaseT,,,,,,Four-pair Category 6A or better, full duplex mode only
.1.3.6.1.2.1.26.4.55,IANA-MAU-MIB::dot3MauType10GbaseLRM,,,,,,R multimode fiber over 1310 nm optics
.1.3.6.1.2.1.26.4.56,IANA-MAU-MIB::dot3MauType1000baseKX,,,,,,X backplane, full duplex mode only
.1.3.6.1.2.1.26.4.57,IANA-MAU-MIB::dot3MauType10GbaseKX4,,,,,,4 lane X backplane, full duplex mode only
.1.3.6.1.2.1.26.4.58,IANA-MAU-MIB::dot3MauType10GbaseKR,,,,,,R backplane, full duplex mode only
.1.3.6.1.2.1.26.4.59,IANA-MAU-MIB::dot3MauType10G1GbasePRXD1,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting low power budget (PRX10)
.1.3.6.1.2.1.26.4.60,IANA-MAU-MIB::dot3MauType10G1GbasePRXD2,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting medium power budget (PRX20)
.1.3.6.1.2.1.26.4.61,IANA-MAU-MIB::dot3MauType10G1GbasePRXD3,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting high power budget (PRX30)
.1.3.6.1.2.1.26.4.62,IANA-MAU-MIB::dot3MauType10G1GbasePRXU1,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting low power budget (PRX10)
.1.3.6.1.2.1.26.4.63,IANA-MAU-MIB::dot3MauType10G1GbasePRXU2,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting medium power budget (PRX20)
.1.3.6.1.2.1.26.4.64,IANA-MAU-MIB::dot3MauType10G1GbasePRXU3,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting high power budget (PRX30)
.1.3.6.1.2.1.26.4.65,IANA-MAU-MIB::dot3MauType10GbasePRD1,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting low power budget (PR10)
.1.3.6.1.2.1.26.4.66,IANA-MAU-MIB::dot3MauType10GbasePRD2,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting medium power budget (PR20)
.1.3.6.1.2.1.26.4.67,IANA-MAU-MIB::dot3MauType10GbasePRD3,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting high power budget (PR30)
.1.3.6.1.2.1.26.4.68,IANA-MAU-MIB::dot3MauType10GbasePRU1,,,,,,One single-mode fiber symmetric-rate EPON ONU, supporting low and medium power budget (PR10 and PR20)
.1.3.6.1.2.1.26.4.69,IANA-MAU-MIB::dot3MauType10GbasePRU3,,,,,,One single-mode fiber symmetric-rate EPON ONU, supporting high power budget (PR30)
.1.3.6.1.2.1.26.4.70,IANA-MAU-MIB::dot3MauType40GbaseKR4,,,,,,40GBASE-R PCS/PMA over an electrical backplane
.1.3.6.1.2.1.26.4.71,IANA-MAU-MIB::dot3MauType40GbaseCR4,,,,,,40GBASE-R PCS/PMA over 4 lane shielded copper balanced cable
.1.3.6.1.2.1.26.4.72,IANA-MAU-MIB::dot3MauType40GbaseSR4,,,,,,40GBASE-R PCS/PMA over 4 lane multimode fiber
.1.3.6.1.2.1.26.4.73,IANA-MAU-MIB::dot3MauType40GbaseFR,,,,,,40GBASE-R PCS/PMA over single mode fiber
.1.3.6.1.2.1.26.4.74,IANA-MAU-MIB::dot3MauType40GbaseLR4,,,,,,40GBASE-R PCS/PMA over 4 WDM lane single mode fiber
.1.3.6.1.2.1.26.4.75,IANA-MAU-MIB::dot3MauType100GbaseCR10,,,,,,100GBASE-R PCS/PMA over 10 lane shielded copper balanced cable
.1.3.6.1.2.1.26.4.76,IANA-MAU-MIB::dot3MauType100GbaseSR10,,,,,,100GBASE-R PCS/PMA over 10 lane multimode fiber
.1.3.6.1.2.1.26.4.77,IANA-MAU-MIB::dot3MauType100GbaseLR4,,,,,,100GBASE-R PCS/PMA over 4 WDM lane single mode fiber, long reach
.1.3.6.1.2.1.26.4.78,IANA-MAU-MIB::dot3MauType100GbaseER4,,,,,,100GBASE-R PCS/PMA over 4 WDM lane single mode fiber PMD, extended reach
.1.3.6.1.2.1.26.4.79,IANA-MAU-MIB::dot3MauType1000baseT1,,,,,,1000BASE-T1 single balanced twisted-pair copper cabling PHY
.1.3.6.1.2.1.26.4.80,IANA-MAU-MIB::dot3MauType1000basePX30D,,,,,,One single-mode fiber EPON OLT, 20km, 1:32 split ratio
.1.3.6.1.2.1.26.4.81,IANA-MAU-MIB::dot3MauType1000basePX30U,,,,,,One single-mode fiber EPON ONU, 20km, 1:32 split ratio
.1.3.6.1.2.1.26.4.82,IANA-MAU-MIB::dot3MauType1000basePX40D,,,,,,One single-mode fiber EPON OLT, 20km, 1:64 split ratio
.1.3.6.1.2.1.26.4.83,IANA-MAU-MIB::dot3MauType1000basePX40U,,,,,,One single-mode fiber EPON ONU, 20km, 1:64 split ratio
.1.3.6.1.2.1.26.4.84,IANA-MAU-MIB::dot3MauType10G1GbasePRXD4,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting extended power budget (PRX40)
.1.3.6.1.2.1.26.4.85,IANA-MAU-MIB::dot3MauType10G1GbasePRXU4,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting extended power budget (PRX40)
.1.3.6.1.2.1.26.4.86,IANA-MAU-MIB::dot3MauType10GbasePRD4,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting extended power budget (PR40)
.1.3.6.1.2.1.26.4.87,IANA-MAU-MIB::dot3MauType10GbasePRU4,,,,,,One single-mode fiber symmetric-rate EPON ONU, supporting extended power budget (PR40)
.1.3.6.1.2.1.26.4.88,IANA-MAU-MIB::dot3MauType25GbaseCR,,,,,,25GBASE-R PCS/PMA over shielded balanced copper cable
.1.3.6.1.2.1.26.4.89,IANA-MAU-MIB::dot3MauType25GbaseCRS,,,,,,25GBASE-R PCS/PMA over shielded balanced copper cable without RS-FEC
.1.3.6.1.2.1.26.4.90,IANA-MAU-MIB::dot3MauType25GbaseKR,,,,,,25GBASE-R PCS/PMA over an electrical backplane
.1.3.6.1.2.1.26.4.91,IANA-MAU-MIB::dot3MauType25GbaseKRS,,,,,,25GBASE-R PCS/PMA over an electrical backplane without RS-FEC
.1.3.6.1.2.1.26.4.92,IANA-MAU-MIB::dot3MauType25GbaseR,,,,,,25GBASE-R PCS/PMA over undefined PMD
.1.3.6.1.2.1.26.4.93,IANA-MAU-MIB::dot3MauType25GbaseSR,,,,,,25GBASE-R PCS/PMA over multimode fiber
.1.3.6.1.2.1.26.4.94,IANA-MAU-MIB::dot3MauType25GbaseT,,,,,,Four-pair twisted-pair balanced copper cabling
.1.3.6.1.2.1.26.4.95,IANA-MAU-MIB::dot3MauType40GbaseER4,,,,,,40GBASE-R PCS/PMA over 4 WDM lane single mode fiber
.1.3.6.1.2.1.26.4.96,IANA-MAU-MIB::dot3MauType40GbaseR,,,,,,40GBASE-R PCS as over undefined PMA/PMD
.1.3.6.1.2.1.26.4.97,IANA-MAU-MIB::dot3MauType40GbaseT,,,,,,Four-pair twisted-pair balanced copper cabling
.1.3.6.1.2.1.26.4.98,IANA-MAU-MIB::dot3MauType100GbaseCR4,,,,,, 100GBASE-R PCS/PMA over 4 lane shielded copper balanced cable
.1.3.6.1.2.1.26.4.99,IANA-MAU-MIB::dot3MauType100GbaseKR4,,,,,,100GBASE-R PCS/PMA over an electrical backplane
.1.3.6.1.2.1.26.4.100,IANA-MAU-MIB::dot3MauType100GbaseKP4,,,,,,100GBASE-P PCS/PMA over an electrical backplane PMD
.1.3.6.1.2.1.26.4.101,IANA-MAU-MIB::dot3MauType100GbaseR,,,,,,100GBASE-R Multi-lane PCS over undefined PMA/PMD
.1.3.6.1.2.1.26.4.102,IANA-MAU-MIB::dot3MauType100GbaseSR4,,,,,,100GBASE-R PCS/PMA over 4 lane multimode fiber
.1.3.6.1.2.1.26.5,MAU-MIB::dot3IfMauAutoNegGroup,,,,,,
.1.3.6.1.2.1.26.5.1,MAU-MIB::ifMauAutoNegTable,,not-accessible,,current,,Configuration and status objects for the auto-negotiation function of MAUs attached to interfaces. The ifMauAutoNegTable applies to systems in which auto-negotiation is supported on one or more MAUs attached to interfaces. Note that if auto-negotiation is present and enabled, the ifMauType object reflects the result of the auto-negotiation function.
.1.3.6.1.2.1.26.5.1.1,MAU-MIB::ifMauAutoNegEntry,,not-accessible,ifMauIfIndex:ifMauIndex,current,,An entry in the table, containing configuration and status information for the auto-negotiation function of a particular MAU.
.1.3.6.1.2.1.26.5.1.1.1,MAU-MIB::ifMauAutoNegAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Setting this object to enabled(1) will cause the interface that has the auto-negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. Under these conditions, an IEEE 802.3 MAU will immediately be forced to the state indicated by the value of the object ifMauDefaultType. NOTE TO IMPLEMENTORS: When ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by the ifMauDefaultType object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
.1.3.6.1.2.1.26.5.1.1.2,MAU-MIB::ifMauAutoNegRemoteSignaling,INTEGER,read-only,,current,detected(1):notdetected(2),A value indicating whether the remote end of the link is using auto-negotiation signaling. It takes the value detected(1) if and only if, during the previous link negotiation, FLP Bursts were received.
.1.3.6.1.2.1.26.5.1.1.4,MAU-MIB::ifMauAutoNegConfig,INTEGER,read-only,,current,other(1):configuring(2):complete(3):disabled(4):parallelDetectFail(5),A value indicating the current status of the auto-negotiation process. The enumeration parallelDetectFail(5) maps to a failure in parallel detection as defined in 28.2.3.1 of [IEEE802.3].
.1.3.6.1.2.1.26.5.1.1.5,MAU-MIB::ifMauAutoNegCapability,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauAutoNegCapabilityBits. A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. The value is a sum that initially takes the value zero. Then, for each capability of this interface, 2 raised to the power noted below is added to the sum. For example, an interface that has the capability to support only 100Base-TX half duplex would have a value of 32768 (2**15). In contrast, an interface that supports both 100Base-TX half duplex and 100Base-TX full duplex would have a value of 98304 ((2**15) + (2**16)). The powers of 2 assigned to the capabilities are these: Power Capability 0 other or unknown (1-9) (reserved) 10 10BASE-T half duplex mode 11 10BASE-T full duplex mode 12 (reserved) 13 (reserved) 14 100BASE-T4 15 100BASE-TX half duplex mode 16 100BASE-TX full duplex mode 17 (reserved) 18 (reserved) 19 100BASE-T2 half duplex mode 20 100BASE-T2 full duplex mode Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB.
.1.3.6.1.2.1.26.5.1.1.6,MAU-MIB::ifMauAutoNegCapAdvertised,Integer32,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauAutoNegCapAdvertisedBits. A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Refer to ifMauAutoNegCapability for a description of the possible values of this object. Capabilities in this object that are not available in ifMauAutoNegCapability cannot be enabled.
.1.3.6.1.2.1.26.5.1.1.7,MAU-MIB::ifMauAutoNegCapReceived,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauAutoNegCapReceivedBits. A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Refer to ifMauAutoNegCapability for a description of the possible values of this object. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB.
.1.3.6.1.2.1.26.5.1.1.8,MAU-MIB::ifMauAutoNegRestart,INTEGER,read-write,,current,restart(1):norestart(2),If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of this object to norestart(2) has no effect.
.1.3.6.1.2.1.26.5.1.1.9,MAU-MIB::ifMauAutoNegCapabilityBits,BITS,read-only,,current,bOther(0):b10baseT(1):b10baseTFD(2):b100baseT4(3):b100baseTX(4):b100baseTXFD(5):b100baseT2(6):b100baseT2FD(7):bFdxPause(8):bFdxAPause(9):bFdxSPause(10):bFdxBPause(11):b1000baseX(12):b1000baseXFD(13):b1000baseT(14):b1000baseTFD(15):b10GbaseT(16):b1000baseKX(17):b10GbaseKX4(18):b10GbaseKR(19):b40GbaseKR4(20):b40GbaseCR4(21):b100GbaseCR10(22):b1000baseT1(23):b25GbaseRS(24):b25GbaseR(25):bRSFEC25Greq(26):bBaseFEC25Greq(27):b25GbaseT(28):b40GbaseT(29):b100GbaseCR4(30):b100GbaseKR4(31):b100GbaseKP4(32):bForceMS(33),A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. Note that the local auto-negotiation entity may support some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
.1.3.6.1.2.1.26.5.1.1.10,MAU-MIB::ifMauAutoNegCapAdvertisedBits,BITS,read-write,,current,bOther(0):b10baseT(1):b10baseTFD(2):b100baseT4(3):b100baseTX(4):b100baseTXFD(5):b100baseT2(6):b100baseT2FD(7):bFdxPause(8):bFdxAPause(9):bFdxSPause(10):bFdxBPause(11):b1000baseX(12):b1000baseXFD(13):b1000baseT(14):b1000baseTFD(15):b10GbaseT(16):b1000baseKX(17):b10GbaseKX4(18):b10GbaseKR(19):b40GbaseKR4(20):b40GbaseCR4(21):b100GbaseCR10(22):b1000baseT1(23):b25GbaseRS(24):b25GbaseR(25):bRSFEC25Greq(26):bBaseFEC25Greq(27):b25GbaseT(28):b40GbaseT(29):b100GbaseCR4(30):b100GbaseKR4(31):b100GbaseKP4(32):bForceMS(33),A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in ifMauAutoNegCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
.1.3.6.1.2.1.26.5.1.1.11,MAU-MIB::ifMauAutoNegCapReceivedBits,BITS,read-only,,current,bOther(0):b10baseT(1):b10baseTFD(2):b100baseT4(3):b100baseTX(4):b100baseTXFD(5):b100baseT2(6):b100baseT2FD(7):bFdxPause(8):bFdxAPause(9):bFdxSPause(10):bFdxBPause(11):b1000baseX(12):b1000baseXFD(13):b1000baseT(14):b1000baseTFD(15):b10GbaseT(16):b1000baseKX(17):b10GbaseKX4(18):b10GbaseKR(19):b40GbaseKR4(20):b40GbaseCR4(21):b100GbaseCR10(22):b1000baseT1(23):b25GbaseRS(24):b25GbaseR(25):bRSFEC25Greq(26):bBaseFEC25Greq(27):b25GbaseT(28):b40GbaseT(29):b100GbaseCR4(30):b100GbaseKR4(31):b100GbaseKP4(32):bForceMS(33),A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
.1.3.6.1.2.1.26.5.1.1.12,MAU-MIB::ifMauAutoNegRemoteFaultAdvertised,INTEGER,read-write,,current,noError(1):offline(2):linkFailure(3):autoNegError(4),A value that identifies any local fault indications that this MAU has detected and will advertise at the next auto-negotiation interaction for 1000Mbps MAUs.
.1.3.6.1.2.1.26.5.1.1.13,MAU-MIB::ifMauAutoNegRemoteFaultReceived,INTEGER,read-only,,current,noError(1):offline(2):linkFailure(3):autoNegError(4),A value that identifies any fault indications received from the far end of a link by the local auto-negotiation entity for 1000Mbps MAUs.
.1.3.6.1.2.1.26.6,MAU-MIB::mauMod,,,,,,Management information for 802.3 MAUs. The following reference is used throughout this MIB module: [IEEE802.3] refers to: IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications'. Of particular interest is Clause 30, 'Management'. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4836; see the RFC itself for full legal notices.
.1.3.6.1.2.1.26.6.1,MAU-MIB::mauModConf,,,,,,
.1.3.6.1.2.1.26.6.1.1,MAU-MIB::mauModCompls,,,,,,
.1.3.6.1.2.1.26.6.1.1.1,MAU-MIB::mauModRpCompl,,,,,,******** THIS COMPLIANCE IS DEPRECATED ******** Compliance for MAUs attached to repeater ports. This compliance is deprecated and replaced by mauModRpCompl2, which corrects an oversight by allowing rpMauStatus to be implemented read-only.
.1.3.6.1.2.1.26.6.1.1.2,MAU-MIB::mauModIfCompl,,,,,,******** THIS COMPLIANCE IS DEPRECATED ******** Compliance for MAUs attached to interfaces. This compliance is deprecated and replaced by mauModIfCompl2.
.1.3.6.1.2.1.26.6.1.1.3,MAU-MIB::mauModIfCompl2,,,,,,******** THIS COMPLIANCE IS DEPRECATED ******** Compliance for MAUs attached to interfaces. This compliance is deprecated and replaced by mauModIfCompl3.
.1.3.6.1.2.1.26.6.1.1.4,MAU-MIB::mauModRpCompl2,,,,,,Compliance for MAUs attached to repeater ports. Note that compliance with this compliance statement requires compliance with the snmpRptrModCompl MODULE-COMPLIANCE statement of the SNMP-REPEATER-MIB (RFC 2108).
.1.3.6.1.2.1.26.6.1.1.5,MAU-MIB::mauModIfCompl3,,,,,,Compliance for MAUs attached to interfaces. Note that compliance with this compliance statement requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (RFC 2863) and the dot3Compliance2 MODULE-COMPLIANCE statement of the EtherLike-MIB (RFC3635).
.1.3.6.1.2.1.26.6.1.2,MAU-MIB::mauModObjGrps,,,,,,
.1.3.6.1.2.1.26.6.1.2.1,MAU-MIB::mauRpGrpBasic,,,,,,Basic conformance group for MAUs attached to repeater ports. This group is also the conformance specification for RFC 1515 implementations.
.1.3.6.1.2.1.26.6.1.2.2,MAU-MIB::mauRpGrp100Mbs,,,,,,Conformance group for MAUs attached to repeater ports with 100 Mb/s or greater capability.
.1.3.6.1.2.1.26.6.1.2.3,MAU-MIB::mauRpGrpJack,,,,,,Conformance group for MAUs attached to repeater ports with managed jacks.
.1.3.6.1.2.1.26.6.1.2.4,MAU-MIB::mauIfGrpBasic,,,,,,Basic conformance group for MAUs attached to interfaces. This group also provides a conformance specification for RFC 1515 implementations.
.1.3.6.1.2.1.26.6.1.2.5,MAU-MIB::mauIfGrp100Mbs,,,,,,********* THIS GROUP IS DEPRECATED ********** Conformance group for MAUs attached to interfaces with 100 Mb/s capability. This object group has been deprecated in favor of mauIfGrpHighCapacity.
.1.3.6.1.2.1.26.6.1.2.6,MAU-MIB::mauIfGrpJack,,,,,,Conformance group for MAUs attached to interfaces with managed jacks.
.1.3.6.1.2.1.26.6.1.2.7,MAU-MIB::mauIfGrpAutoNeg,,,,,,********* THIS GROUP IS DEPRECATED ********** Conformance group for MAUs attached to interfaces with managed auto-negotiation. This object group has been deprecated in favor of mauIfGrpAutoNeg2.
.1.3.6.1.2.1.26.6.1.2.8,MAU-MIB::mauBroadBasic,,,,,,********* THIS GROUP IS DEPRECATED ********** Conformance group for broadband MAUs attached to interfaces. This object group is deprecated. There have been no reported implementations of this group, and it was felt to be unlikely that there will be any future implementations.
.1.3.6.1.2.1.26.6.1.2.9,MAU-MIB::mauIfGrpHighCapacity,,,,,,Conformance group for MAUs attached to interfaces with 100 Mb/s or greater capability.
.1.3.6.1.2.1.26.6.1.2.10,MAU-MIB::mauIfGrpAutoNeg2,,,,,,Conformance group for MAUs attached to interfaces with managed auto-negotiation.
.1.3.6.1.2.1.26.6.1.2.11,MAU-MIB::mauIfGrpAutoNeg1000Mbps,,,,,,Conformance group for 1000Mbps MAUs attached to interfaces with managed auto-negotiation.
.1.3.6.1.2.1.26.6.1.2.12,MAU-MIB::mauIfGrpHCStats,,,,,,Conformance for high capacity statistics for MAUs attached to interfaces.
.1.3.6.1.2.1.26.6.1.3,MAU-MIB::mauModNotGrps,,,,,,
.1.3.6.1.2.1.26.6.1.3.1,MAU-MIB::rpMauNotifications,,,,,,Notifications for repeater MAUs.
.1.3.6.1.2.1.26.6.1.3.2,MAU-MIB::ifMauNotifications,,,,,,Notifications for interface MAUs.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.2.1.31,IF-MIB::ifMIB,,,,,,The MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229.
.1.3.6.1.2.1.31.1,IF-MIB::ifMIBObjects,,,,,,
.1.3.6.1.2.1.31.1.1,IF-MIB::ifXTable,,not-accessible,,current,,A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
.1.3.6.1.2.1.31.1.1.1,IF-MIB::ifXEntry,,not-accessible,,current,,An entry containing additional management information applicable to a particular interface.
.1.3.6.1.2.1.31.1.1.1.1,IF-MIB::ifName,OCTET,read-only,,current,,The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
.1.3.6.1.2.1.31.1.1.1.2,IF-MIB::ifInMulticastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.3,IF-MIB::ifInBroadcastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.4,IF-MIB::ifOutMulticastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.5,IF-MIB::ifOutBroadcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.6,IF-MIB::ifHCInOctets,Counter64,read-only,,current,,The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.7,IF-MIB::ifHCInUcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.8,IF-MIB::ifHCInMulticastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.9,IF-MIB::ifHCInBroadcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.10,IF-MIB::ifHCOutOctets,Counter64,read-only,,current,,The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.11,IF-MIB::ifHCOutUcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.12,IF-MIB::ifHCOutMulticastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.13,IF-MIB::ifHCOutBroadcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.14,IF-MIB::ifLinkUpDownTrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
.1.3.6.1.2.1.31.1.1.1.15,IF-MIB::ifHighSpeed,Gauge32,read-only,,current,,An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
.1.3.6.1.2.1.31.1.1.1.16,IF-MIB::ifPromiscuousMode,INTEGER,read-write,,current,true(1):false(2),This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface.
.1.3.6.1.2.1.31.1.1.1.17,IF-MIB::ifConnectorPresent,INTEGER,read-only,,current,true(1):false(2),This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise.
.1.3.6.1.2.1.31.1.1.1.18,IF-MIB::ifAlias,OCTET,read-write,,current,,This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
.1.3.6.1.2.1.31.1.1.1.19,IF-MIB::ifCounterDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the ifTable or ifXTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.2,IF-MIB::ifStackTable,,not-accessible,,current,,The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'on top of' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs over the sub-layer with ifIndex value y, then this table contains: ifStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.0.x=active ifStackStatus.x.0=active 
.1.3.6.1.2.1.31.1.2.1,IF-MIB::ifStackEntry,,not-accessible,ifStackHigherLayer:ifStackLowerLayer,current,,Information on a particular relationship between two sub- layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
.1.3.6.1.2.1.31.1.2.1.1,IF-MIB::ifStackHigherLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corresponding instance of ifStackLowerLayer. If there is no higher sub-layer (below the internetwork layer), then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.2,IF-MIB::ifStackLowerLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the lower sub-layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of ifStackHigherLayer. If there is no lower sub-layer, then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.3,IF-MIB::ifStackStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the relationship between two sub-layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down the interface stack. Thus, write access to this object is likely to be inappropriate for some types of interfaces, and many implementations will choose not to support write-access for any type of interface.
.1.3.6.1.2.1.31.1.3,IF-MIB::ifTestTable,,not-accessible,,deprecated,,This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tests for an interface are defined in the media-specific MIB for that interface. After invoking a test, the object ifTestResult can be read to determine the outcome. If an agent can not perform the test, ifTestResult is set to so indicate. The object ifTestCode can be used to provide further test- specific or interface-specific (or even enterprise-specific) information concerning the outcome of the test. Only one test can be in progress on each interface at any one time. If one test is in progress when another test is invoked, the second test is rejected. Some agents may reject a test when a prior test is active on another interface. Before starting a test, a manager-station must first obtain 'ownership' of the entry in the ifTestTable for the interface to be tested. This is accomplished with the ifTestId and ifTestStatus objects as follows: try_again: get (ifTestId, ifTestStatus) while (ifTestStatus != notInUse) /* * Loop while a test is running or some other * manager is configuring a test. */ short delay get (ifTestId, ifTestStatus) } /* * Is not being used right now -- let's compete * to see who gets it. */ lock_value = ifTestId if ( set(ifTestId = lock_value, ifTestStatus = inUse, ifTestOwner = 'my-IP-address') == FAILURE) /* * Another manager got the ifTestEntry -- go * try again */ goto try_again; /* * I have the lock */ set up any test parameters. /* * This starts the test */ set(ifTestType = test_to_run); wait for test completion by polling ifTestResult when test completes, agent sets ifTestResult agent also sets ifTestStatus = 'notInUse' retrieve any additional test results, and ifTestId if (ifTestId == lock_value+1) results are valid A manager station first retrieves the value of the appropriate ifTestId and ifTestStatus objects, periodically repeating the retrieval if necessary, until the value of ifTestStatus is 'notInUse'. The manager station then tries to set the same ifTestId object to the value it just retrieved, the same ifTestStatus object to 'inUse', and the corresponding ifTestOwner object to a value indicating itself. If the set operation succeeds then the manager has obtained ownership of the ifTestEntry, and the value of the ifTestId object is incremented by the agent (per the semantics of TestAndIncr). Failure of the set operation indicates that some other manager has obtained ownership of the ifTestEntry. Once ownership is obtained, any test parameters can be setup, and then the test is initiated by setting ifTestType. On completion of the test, the agent sets ifTestStatus to 'notInUse'. Once this occurs, the manager can retrieve the results. In the (rare) event that the invocation of tests by two network managers were to overlap, then there would be a possibility that the first test's results might be overwritten by the second test's results prior to the first results being read. This unlikely circumstance ca
.1.3.6.1.2.1.31.1.3.1,IF-MIB::ifTestEntry,,not-accessible,,deprecated,,An entry containing objects for invoking tests on an interface.
.1.3.6.1.2.1.31.1.3.1.1,IF-MIB::ifTestId,INTEGER,read-write,,deprecated,,This object identifies the current invocation of the interface's test.
.1.3.6.1.2.1.31.1.3.1.2,IF-MIB::ifTestStatus,INTEGER,read-write,,deprecated,notInUse(1):inUse(2),This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
.1.3.6.1.2.1.31.1.3.1.3,IF-MIB::ifTestType,OBJECT,read-write,,deprecated,,A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full-duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
.1.3.6.1.2.1.31.1.3.1.4,IF-MIB::ifTestResult,INTEGER,read-only,,deprecated,none(1):success(2):inProgress(3):notSupported(4):unAbleToRun(5):aborted(6):failed(7),This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
.1.3.6.1.2.1.31.1.3.1.5,IF-MIB::ifTestCode,OBJECT,read-only,,deprecated,,This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or InstancePointer textual conventions as defined in RFC 2579. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
.1.3.6.1.2.1.31.1.3.1.6,IF-MIB::ifTestOwner,OCTET,read-write,,deprecated,,The entity which currently has the 'ownership' required to invoke a test on this interface.
.1.3.6.1.2.1.31.1.4,IF-MIB::ifRcvAddressTable,,not-accessible,,current,,This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/frames on a particular interface, except as follows: - for an interface operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode. - for 802.5 functional addresses, only one entry is required, for the address which has the functional address bit ANDed with the bit mask of all functional addresses for which the interface will accept frames. A system is normally able to use any unicast address which corresponds to an entry in this table as a source address.
.1.3.6.1.2.1.31.1.4.1,IF-MIB::ifRcvAddressEntry,,not-accessible,ifIndex:ifRcvAddressAddress,current,,A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex.
.1.3.6.1.2.1.31.1.4.1.1,IF-MIB::ifRcvAddressAddress,OCTET,not-accessible,,current,,An address for which the system will accept packets/frames on this entry's interface.
.1.3.6.1.2.1.31.1.4.1.2,IF-MIB::ifRcvAddressStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and delete rows in the ifRcvAddressTable.
.1.3.6.1.2.1.31.1.4.1.3,IF-MIB::ifRcvAddressType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3),This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(2) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart.
.1.3.6.1.2.1.31.1.5,IF-MIB::ifTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.6,IF-MIB::ifStackLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last change of the (whole) interface stack. A change of the interface stack is defined to be any creation, deletion, or change in value of any instance of ifStackStatus. If the interface stack has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.2,IF-MIB::ifConformance,,,,,,
.1.3.6.1.2.1.31.2.1,IF-MIB::ifGroups,,,,,,
.1.3.6.1.2.1.31.2.1.1,IF-MIB::ifGeneralGroup,,,,,,A collection of objects deprecated in favour of ifGeneralInformationGroup.
.1.3.6.1.2.1.31.2.1.2,IF-MIB::ifFixedLengthGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) character-oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.3,IF-MIB::ifHCFixedLengthGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) character- oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.4,IF-MIB::ifPacketGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.5,IF-MIB::ifHCPacketGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second but less than or equal to 650,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.6,IF-MIB::ifVHCPacketGroup,,,,,,A collection of objects providing information specific to higher speed (greater than 650,000,000 bits/second) packet- oriented network interfaces.
.1.3.6.1.2.1.31.2.1.7,IF-MIB::ifRcvAddressGroup,,,,,,A collection of objects providing information on the multiple addresses which an interface receives.
.1.3.6.1.2.1.31.2.1.8,IF-MIB::ifTestGroup,,,,,,A collection of objects providing the ability to invoke tests on an interface.
.1.3.6.1.2.1.31.2.1.9,IF-MIB::ifStackGroup,,,,,,The previous collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.10,IF-MIB::ifGeneralInformationGroup,,,,,,A collection of objects providing information applicable to all network interfaces.
.1.3.6.1.2.1.31.2.1.11,IF-MIB::ifStackGroup2,,,,,,A collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.12,IF-MIB::ifOldObjectsGroup,,,,,,The collection of objects deprecated from the original MIB- II interfaces group.
.1.3.6.1.2.1.31.2.1.13,IF-MIB::ifCounterDiscontinuityGroup,,,,,,A collection of objects providing information specific to interface counter discontinuities.
.1.3.6.1.2.1.31.2.1.14,IF-MIB::linkUpDownNotificationsGroup,,,,,,The notifications which indicate specific changes in the value of ifOperStatus.
.1.3.6.1.2.1.31.2.2,IF-MIB::ifCompliances,,,,,,
.1.3.6.1.2.1.31.2.2.1,IF-MIB::ifCompliance,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.2,IF-MIB::ifCompliance2,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.3,IF-MIB::ifCompliance3,,,,,,The compliance statement for SNMP entities which have network interfaces.
.1.3.6.1.2.1.32,DNS-SERVER-MIB::dns,,,,,,The OID assigned to DNS MIB work by the IANA.
.1.3.6.1.2.1.32.1,DNS-SERVER-MIB::dnsServMIB,,,,,,The MIB module for entities implementing the server side of the Domain Name System (DNS) protocol.
.1.3.6.1.2.1.32.1.1,DNS-SERVER-MIB::dnsServMIBObjects,,,,,,
.1.3.6.1.2.1.32.1.1.1,DNS-SERVER-MIB::dnsServConfig,,,,,,
.1.3.6.1.2.1.32.1.1.1.1,DNS-SERVER-MIB::dnsServConfigImplementIdent,OCTET,read-only,,current,,The implementation identification string for the DNS server software in use on the system, for example; `FNS-2.1'
.1.3.6.1.2.1.32.1.1.1.2,DNS-SERVER-MIB::dnsServConfigRecurs,INTEGER,read-write,,current,available(1):restricted(2):unavailable(3),This represents the recursion services offered by this name server. The values that can be read or written are: available(1) - performs recursion on requests from clients. restricted(2) - recursion is performed on requests only from certain clients, for example; clients on an access control list. unavailable(3) - recursion is not available.
.1.3.6.1.2.1.32.1.1.1.3,DNS-SERVER-MIB::dnsServConfigUpTime,Gauge32,read-only,,current,,If the server has a persistent state (e.g., a process), this value will be the time elapsed since it started. For software without persistant state, this value will be zero.
.1.3.6.1.2.1.32.1.1.1.4,DNS-SERVER-MIB::dnsServConfigResetTime,Gauge32,read-only,,current,,If the server has a persistent state (e.g., a process) and supports a `reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed since the last time the name server was `reset.' For software that does not have persistence or does not support a `reset' operation, this value will be zero.
.1.3.6.1.2.1.32.1.1.1.5,DNS-SERVER-MIB::dnsServConfigReset,INTEGER,read-write,,current,other(1):reset(2):initializing(3):running(4),Status/action object to reinitialize any persistant name server state. When set to reset(2), any persistant name server state (such as a process) is reinitialized as if the name server had just been started. This value will never be returned by a read operation. When read, one of the following values will be returned: other(1) - server in some unknown state; initializing(3) - server (re)initializing; running(4) - server currently running.
.1.3.6.1.2.1.32.1.1.2,DNS-SERVER-MIB::dnsServCounter,,,,,,
.1.3.6.1.2.1.32.1.1.2.2,DNS-SERVER-MIB::dnsServCounterAuthAns,Counter32,read-only,,current,,Number of queries which were authoritatively answered.
.1.3.6.1.2.1.32.1.1.2.3,DNS-SERVER-MIB::dnsServCounterAuthNoNames,Counter32,read-only,,current,,Number of queries for which `authoritative no such name' responses were made.
.1.3.6.1.2.1.32.1.1.2.4,DNS-SERVER-MIB::dnsServCounterAuthNoDataResps,Counter32,read-only,,current,,Number of queries for which `authoritative no such data' (empty answer) responses were made.
.1.3.6.1.2.1.32.1.1.2.5,DNS-SERVER-MIB::dnsServCounterNonAuthDatas,Counter32,read-only,,current,,Number of queries which were non-authoritatively answered (cached data).
.1.3.6.1.2.1.32.1.1.2.6,DNS-SERVER-MIB::dnsServCounterNonAuthNoDatas,Counter32,read-only,,current,,Number of queries which were non-authoritatively answered with no data (empty answer).
.1.3.6.1.2.1.32.1.1.2.7,DNS-SERVER-MIB::dnsServCounterReferrals,Counter32,read-only,,current,,Number of requests that were referred to other servers.
.1.3.6.1.2.1.32.1.1.2.8,DNS-SERVER-MIB::dnsServCounterErrors,Counter32,read-only,,current,,Number of requests the server has processed that were answered with errors (RCODE values other than 0 and 3).
.1.3.6.1.2.1.32.1.1.2.9,DNS-SERVER-MIB::dnsServCounterRelNames,Counter32,read-only,,current,,Number of requests received by the server for names that are only 1 label long (text form - no internal dots).
.1.3.6.1.2.1.32.1.1.2.10,DNS-SERVER-MIB::dnsServCounterReqRefusals,Counter32,read-only,,current,,Number of DNS requests refused by the server.
.1.3.6.1.2.1.32.1.1.2.11,DNS-SERVER-MIB::dnsServCounterReqUnparses,Counter32,read-only,,current,,Number of requests received which were unparseable.
.1.3.6.1.2.1.32.1.1.2.12,DNS-SERVER-MIB::dnsServCounterOtherErrors,Counter32,read-only,,current,,Number of requests which were aborted for other (local) server errors.
.1.3.6.1.2.1.32.1.1.2.13,DNS-SERVER-MIB::dnsServCounterTable,,not-accessible,,current,,Counter information broken down by DNS class and type.
.1.3.6.1.2.1.32.1.1.2.13.1,DNS-SERVER-MIB::dnsServCounterEntry,,not-accessible,dnsServCounterOpCode:dnsServCounterQClass:dnsServCounterQType:dnsServCounterTransport,current,,This table contains count information for each DNS class and type value known to the server. The index allows management software to to create indices to the table to get the specific information desired, e.g., number of queries over UDP for records with type value `A' which came to this server. In order to prevent an uncontrolled expansion of rows in the table; if dnsServCounterRequests is 0 and dnsServCounterResponses is 0, then the row does not exist and `no such' is returned when the agent is queried for such instances.
.1.3.6.1.2.1.32.1.1.2.13.1.1,DNS-SERVER-MIB::dnsServCounterOpCode,INTEGER,not-accessible,,current,,The DNS OPCODE being counted in this row of the table.
.1.3.6.1.2.1.32.1.1.2.13.1.2,DNS-SERVER-MIB::dnsServCounterQClass,INTEGER,not-accessible,,current,,The class of record being counted in this row of the table.
.1.3.6.1.2.1.32.1.1.2.13.1.3,DNS-SERVER-MIB::dnsServCounterQType,INTEGER,not-accessible,,current,,The type of record which is being counted in this row in the table.
.1.3.6.1.2.1.32.1.1.2.13.1.4,DNS-SERVER-MIB::dnsServCounterTransport,INTEGER,not-accessible,,current,udp(1):tcp(2):other(3),A value of udp(1) indicates that the queries reported on this row were sent using UDP. A value of tcp(2) indicates that the queries reported on this row were sent using TCP. A value of other(3) indicates that the queries reported on this row were sent using a transport that was neither TCP nor UDP.
.1.3.6.1.2.1.32.1.1.2.13.1.5,DNS-SERVER-MIB::dnsServCounterRequests,Counter32,read-only,,current,,Number of requests (queries) that have been recorded in this row of the table.
.1.3.6.1.2.1.32.1.1.2.13.1.6,DNS-SERVER-MIB::dnsServCounterResponses,Counter32,read-only,,current,,Number of responses made by the server since initialization for the kind of query identified on this row of the table.
.1.3.6.1.2.1.32.1.1.3,DNS-SERVER-MIB::dnsServOptCounter,,,,,,
.1.3.6.1.2.1.32.1.1.3.1,DNS-SERVER-MIB::dnsServOptCounterSelfAuthAns,Counter32,read-only,,current,,Number of requests the server has processed which originated from a resolver on the same host for which there has been an authoritative answer.
.1.3.6.1.2.1.32.1.1.3.2,DNS-SERVER-MIB::dnsServOptCounterSelfAuthNoNames,Counter32,read-only,,current,,Number of requests the server has processed which originated from a resolver on the same host for which there has been an authoritative no such name answer given.
.1.3.6.1.2.1.32.1.1.3.3,DNS-SERVER-MIB::dnsServOptCounterSelfAuthNoDataResps,Counter32,read-only,,current,,Number of requests the server has processed which originated from a resolver on the same host for which there has been an authoritative no such data answer (empty answer) made.
.1.3.6.1.2.1.32.1.1.3.4,DNS-SERVER-MIB::dnsServOptCounterSelfNonAuthDatas,Counter32,read-only,,current,,Number of requests the server has processed which originated from a resolver on the same host for which a non-authoritative answer (cached data) was made.
.1.3.6.1.2.1.32.1.1.3.5,DNS-SERVER-MIB::dnsServOptCounterSelfNonAuthNoDatas,Counter32,read-only,,current,,Number of requests the server has processed which originated from a resolver on the same host for which a `non-authoritative, no such data' response was made (empty answer).
.1.3.6.1.2.1.32.1.1.3.6,DNS-SERVER-MIB::dnsServOptCounterSelfReferrals,Counter32,read-only,,current,,Number of queries the server has processed which originated from a resolver on the same host and were referred to other servers.
.1.3.6.1.2.1.32.1.1.3.7,DNS-SERVER-MIB::dnsServOptCounterSelfErrors,Counter32,read-only,,current,,Number of requests the server has processed which originated from a resolver on the same host which have been answered with errors (RCODEs other than 0 and 3).
.1.3.6.1.2.1.32.1.1.3.8,DNS-SERVER-MIB::dnsServOptCounterSelfRelNames,Counter32,read-only,,current,,Number of requests received for names that are only 1 label long (text form - no internal dots) the server has processed which originated from a resolver on the same host.
.1.3.6.1.2.1.32.1.1.3.9,DNS-SERVER-MIB::dnsServOptCounterSelfReqRefusals,Counter32,read-only,,current,,Number of DNS requests refused by the server which originated from a resolver on the same host.
.1.3.6.1.2.1.32.1.1.3.10,DNS-SERVER-MIB::dnsServOptCounterSelfReqUnparses,Counter32,read-only,,current,,Number of requests received which were unparseable and which originated from a resolver on the same host.
.1.3.6.1.2.1.32.1.1.3.11,DNS-SERVER-MIB::dnsServOptCounterSelfOtherErrors,Counter32,read-only,,current,,Number of requests which were aborted for other (local) server errors and which originated on the same host.
.1.3.6.1.2.1.32.1.1.3.12,DNS-SERVER-MIB::dnsServOptCounterFriendsAuthAns,Counter32,read-only,,current,,Number of queries originating from friends which were authoritatively answered. The definition of friends is a locally defined matter.
.1.3.6.1.2.1.32.1.1.3.13,DNS-SERVER-MIB::dnsServOptCounterFriendsAuthNoNames,Counter32,read-only,,current,,Number of queries originating from friends, for which authoritative `no such name' responses were made. The definition of friends is a locally defined matter.
.1.3.6.1.2.1.32.1.1.3.14,DNS-SERVER-MIB::dnsServOptCounterFriendsAuthNoDataResps,Counter32,read-only,,current,,Number of queries originating from friends for which authoritative no such data (empty answer) responses were made. The definition of friends is a locally defined matter.
.1.3.6.1.2.1.32.1.1.3.15,DNS-SERVER-MIB::dnsServOptCounterFriendsNonAuthDatas,Counter32,read-only,,current,,Number of queries originating from friends which were non-authoritatively answered (cached data). The definition of friends is a locally defined matter.
.1.3.6.1.2.1.32.1.1.3.16,DNS-SERVER-MIB::dnsServOptCounterFriendsNonAuthNoDatas,Counter32,read-only,,current,,Number of queries originating from friends which were non-authoritatively answered with no such data (empty answer).
.1.3.6.1.2.1.32.1.1.3.17,DNS-SERVER-MIB::dnsServOptCounterFriendsReferrals,Counter32,read-only,,current,,Number of requests which originated from friends that were referred to other servers. The definition of friends is a locally defined matter.
.1.3.6.1.2.1.32.1.1.3.18,DNS-SERVER-MIB::dnsServOptCounterFriendsErrors,Counter32,read-only,,current,,Number of requests the server has processed which originated from friends and were answered with errors (RCODE values other than 0 and 3). The definition of friends is a locally defined matter.
.1.3.6.1.2.1.32.1.1.3.19,DNS-SERVER-MIB::dnsServOptCounterFriendsRelNames,Counter32,read-only,,current,,Number of requests received for names from friends that are only 1 label long (text form - no internal dots) the server has processed.
.1.3.6.1.2.1.32.1.1.3.20,DNS-SERVER-MIB::dnsServOptCounterFriendsReqRefusals,Counter32,read-only,,current,,Number of DNS requests refused by the server which were received from `friends'.
.1.3.6.1.2.1.32.1.1.3.21,DNS-SERVER-MIB::dnsServOptCounterFriendsReqUnparses,Counter32,read-only,,current,,Number of requests received which were unparseable and which originated from `friends'.
.1.3.6.1.2.1.32.1.1.3.22,DNS-SERVER-MIB::dnsServOptCounterFriendsOtherErrors,Counter32,read-only,,current,,Number of requests which were aborted for other (local) server errors and which originated from `friends'.
.1.3.6.1.2.1.32.1.1.4,DNS-SERVER-MIB::dnsServZone,,,,,,
.1.3.6.1.2.1.32.1.1.4.1,DNS-SERVER-MIB::dnsServZoneTable,,not-accessible,,current,,Table of zones for which this name server provides information. Each of the zones may be loaded from stable storage via an implementation-specific mechanism or may be obtained from another name server via a zone transfer. If name server doesn't load any zones, this table is empty.
.1.3.6.1.2.1.32.1.1.4.1.1,DNS-SERVER-MIB::dnsServZoneEntry,,not-accessible,dnsServZoneName:dnsServZoneClass,current,,An entry in the name server zone table. New rows may be added either via SNMP or by the name server itself.
.1.3.6.1.2.1.32.1.1.4.1.1.1,DNS-SERVER-MIB::dnsServZoneName,OCTET,not-accessible,,current,,DNS name of the zone described by this row of the table. This is the owner name of the SOA RR that defines the top of the zone. This is name is in uppercase: characters 'a' through 'z' are mapped to 'A' through 'Z' in order to make the lexical ordering useful.
.1.3.6.1.2.1.32.1.1.4.1.1.2,DNS-SERVER-MIB::dnsServZoneClass,INTEGER,not-accessible,,current,,DNS class of the RRs in this zone.
.1.3.6.1.2.1.32.1.1.4.1.1.3,DNS-SERVER-MIB::dnsServZoneLastReloadSuccess,Gauge32,read-only,,current,,Elapsed time in seconds since last successful reload of this zone.
.1.3.6.1.2.1.32.1.1.4.1.1.4,DNS-SERVER-MIB::dnsServZoneLastReloadAttempt,Gauge32,read-only,,current,,Elapsed time in seconds since last attempted reload of this zone.
.1.3.6.1.2.1.32.1.1.4.1.1.5,DNS-SERVER-MIB::dnsServZoneLastSourceAttempt,IpAddress,read-only,,current,,IP address of host from which most recent zone transfer of this zone was attempted. This value should match the value of dnsServZoneSourceSuccess if the attempt was succcessful. If zone transfer has not been attempted within the memory of this name server, this value should be 0.0.0.0.
.1.3.6.1.2.1.32.1.1.4.1.1.6,DNS-SERVER-MIB::dnsServZoneStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the information represented in this row of the table.
.1.3.6.1.2.1.32.1.1.4.1.1.7,DNS-SERVER-MIB::dnsServZoneSerial,Counter32,read-only,,current,,Zone serial number (from the SOA RR) of the zone represented by this row of the table. If the zone has not been successfully loaded within the memory of this name server, the value of this variable is zero.
.1.3.6.1.2.1.32.1.1.4.1.1.8,DNS-SERVER-MIB::dnsServZoneCurrent,INTEGER,read-only,,current,true(1):false(2),Whether the server's copy of the zone represented by this row of the table is currently valid. If the zone has never been successfully loaded or has expired since it was last succesfully loaded, this variable will have the value false(2), otherwise this variable will have the value true(1).
.1.3.6.1.2.1.32.1.1.4.1.1.9,DNS-SERVER-MIB::dnsServZoneLastSourceSuccess,IpAddress,read-only,,current,,IP address of host which was the source of the most recent successful zone transfer for this zone. If unknown (e.g., zone has never been successfully transfered) or irrelevant (e.g., zone was loaded from stable storage), this value should be 0.0.0.0.
.1.3.6.1.2.1.32.1.1.4.2,DNS-SERVER-MIB::dnsServZoneSrcTable,,not-accessible,,current,,This table is a list of IP addresses from which the server will attempt to load zone information using DNS zone transfer operations. A reload may occur due to SNMP operations that create a row in dnsServZoneTable or a SET to object dnsServZoneReload. This table is only used when the zone is loaded via zone transfer.
.1.3.6.1.2.1.32.1.1.4.2.1,DNS-SERVER-MIB::dnsServZoneSrcEntry,,not-accessible,dnsServZoneSrcName:dnsServZoneSrcClass:dnsServZoneSrcAddr,current,,An entry in the name server zone source table.
.1.3.6.1.2.1.32.1.1.4.2.1.1,DNS-SERVER-MIB::dnsServZoneSrcName,OCTET,not-accessible,,current,,DNS name of the zone to which this entry applies.
.1.3.6.1.2.1.32.1.1.4.2.1.2,DNS-SERVER-MIB::dnsServZoneSrcClass,INTEGER,not-accessible,,current,,DNS class of zone to which this entry applies.
.1.3.6.1.2.1.32.1.1.4.2.1.3,DNS-SERVER-MIB::dnsServZoneSrcAddr,IpAddress,not-accessible,,current,,IP address of name server host from which this zone might be obtainable.
.1.3.6.1.2.1.32.1.1.4.2.1.4,DNS-SERVER-MIB::dnsServZoneSrcStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the information represented in this row of the table.
.1.3.6.1.2.1.32.1.2,DNS-SERVER-MIB::dnsServMIBGroups,,,,,,
.1.3.6.1.2.1.32.1.2.1,DNS-SERVER-MIB::dnsServConfigGroup,,,,,,A collection of objects providing basic configuration control of a DNS name server.
.1.3.6.1.2.1.32.1.2.2,DNS-SERVER-MIB::dnsServCounterGroup,,,,,,A collection of objects providing basic instrumentation of a DNS name server.
.1.3.6.1.2.1.32.1.2.3,DNS-SERVER-MIB::dnsServOptCounterGroup,,,,,,A collection of objects providing extended instrumentation of a DNS name server.
.1.3.6.1.2.1.32.1.2.4,DNS-SERVER-MIB::dnsServZoneGroup,,,,,,A collection of objects providing configuration control of a DNS name server which loads authoritative zones.
.1.3.6.1.2.1.32.1.3,DNS-SERVER-MIB::dnsServMIBCompliances,,,,,,
.1.3.6.1.2.1.32.1.3.1,DNS-SERVER-MIB::dnsServMIBCompliance,,,,,,The compliance statement for agents implementing the DNS name server MIB extensions.
.1.3.6.1.2.1.32.2,DNS-RESOLVER-MIB::dnsResMIB,,,,,,The MIB module for entities implementing the client (resolver) side of the Domain Name System (DNS) protocol.
.1.3.6.1.2.1.32.2.1,DNS-RESOLVER-MIB::dnsResMIBObjects,,,,,,
.1.3.6.1.2.1.32.2.1.1,DNS-RESOLVER-MIB::dnsResConfig,,,,,,
.1.3.6.1.2.1.32.2.1.1.1,DNS-RESOLVER-MIB::dnsResConfigImplementIdent,OCTET,read-only,,current,,The implementation identification string for the resolver software in use on the system, for example; `RES-2.1'
.1.3.6.1.2.1.32.2.1.1.2,DNS-RESOLVER-MIB::dnsResConfigService,INTEGER,read-only,,current,recursiveOnly(1):iterativeOnly(2):recursiveAndIterative(3),Kind of DNS resolution service provided: recursiveOnly(1) indicates a stub resolver. iterativeOnly(2) indicates a normal full service resolver. recursiveAndIterative(3) indicates a full-service resolver which performs a mix of recursive and iterative queries.
.1.3.6.1.2.1.32.2.1.1.3,DNS-RESOLVER-MIB::dnsResConfigMaxCnames,INTEGER,read-write,,current,,Limit on how many CNAMEs the resolver should allow before deciding that there's a CNAME loop. Zero means that resolver has no explicit CNAME limit.
.1.3.6.1.2.1.32.2.1.1.4,DNS-RESOLVER-MIB::dnsResConfigSbeltTable,,not-accessible,,current,,Table of safety belt information used by the resolver when it hasn't got any better idea of where to send a query, such as when the resolver is booting or is a stub resolver.
.1.3.6.1.2.1.32.2.1.1.4.1,DNS-RESOLVER-MIB::dnsResConfigSbeltEntry,,not-accessible,dnsResConfigSbeltAddr:dnsResConfigSbeltSubTree:dnsResConfigSbeltClass,current,,An entry in the resolver's Sbelt table. Rows may be created or deleted at any time by the DNS resolver and by SNMP SET requests. Whether the values changed via SNMP are saved in stable storage across `reset' operations is implementation-specific.
.1.3.6.1.2.1.32.2.1.1.4.1.1,DNS-RESOLVER-MIB::dnsResConfigSbeltAddr,IpAddress,not-accessible,,current,,The IP address of the Sbelt name server identified by this row of the table.
.1.3.6.1.2.1.32.2.1.1.4.1.2,DNS-RESOLVER-MIB::dnsResConfigSbeltName,OCTET,read-create,,current,,The DNS name of a Sbelt nameserver identified by this row of the table. A zero-length string indicates that the name is not known by the resolver.
.1.3.6.1.2.1.32.2.1.1.4.1.3,DNS-RESOLVER-MIB::dnsResConfigSbeltRecursion,INTEGER,read-create,,current,iterative(1):recursive(2):recursiveAndIterative(3),Kind of queries resolver will be sending to the name server identified in this row of the table: iterative(1) indicates that resolver will be directing iterative queries to this name server (RD bit turned off). recursive(2) indicates that resolver will be directing recursive queries to this name server (RD bit turned on). recursiveAndIterative(3) indicates that the resolver will be directing both recursive and iterative queries to the server identified in this row of the table.
.1.3.6.1.2.1.32.2.1.1.4.1.4,DNS-RESOLVER-MIB::dnsResConfigSbeltPref,INTEGER,read-create,,current,,This value identifies the preference for the name server identified in this row of the table. The lower the value, the more desirable the resolver considers this server.
.1.3.6.1.2.1.32.2.1.1.4.1.5,DNS-RESOLVER-MIB::dnsResConfigSbeltSubTree,OCTET,not-accessible,,current,,Queries sent to the name server identified by this row of the table are limited to those for names in the name subtree identified by this variable. If no such limitation applies, the value of this variable is the name of the root domain (a DNS name consisting of a single zero octet).
.1.3.6.1.2.1.32.2.1.1.4.1.6,DNS-RESOLVER-MIB::dnsResConfigSbeltClass,INTEGER,not-accessible,,current,,The class of DNS queries that will be sent to the server identified by this row of the table.
.1.3.6.1.2.1.32.2.1.1.4.1.7,DNS-RESOLVER-MIB::dnsResConfigSbeltStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status column for this row of the Sbelt table.
.1.3.6.1.2.1.32.2.1.1.5,DNS-RESOLVER-MIB::dnsResConfigUpTime,Gauge32,read-only,,current,,If the resolver has a persistent state (e.g., a process), this value will be the time elapsed since it started. For software without persistant state, this value will be 0.
.1.3.6.1.2.1.32.2.1.1.6,DNS-RESOLVER-MIB::dnsResConfigResetTime,Gauge32,read-only,,current,,If the resolver has a persistent state (e.g., a process) and supports a `reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed since the last time the resolver was `reset.' For software that does not have persistence or does not support a `reset' operation, this value will be zero.
.1.3.6.1.2.1.32.2.1.1.7,DNS-RESOLVER-MIB::dnsResConfigReset,INTEGER,read-write,,current,other(1):reset(2):initializing(3):running(4),Status/action object to reinitialize any persistant resolver state. When set to reset(2), any persistant resolver state (such as a process) is reinitialized as if the resolver had just been started. This value will never be returned by a read operation. When read, one of the following values will be returned: other(1) - resolver in some unknown state; initializing(3) - resolver (re)initializing; running(4) - resolver currently running.
.1.3.6.1.2.1.32.2.1.2,DNS-RESOLVER-MIB::dnsResCounter,,,,,,
.1.3.6.1.2.1.32.2.1.2.3,DNS-RESOLVER-MIB::dnsResCounterByOpcodeTable,,not-accessible,,current,,Table of the current count of resolver queries and answers.
.1.3.6.1.2.1.32.2.1.2.3.1,DNS-RESOLVER-MIB::dnsResCounterByOpcodeEntry,,not-accessible,dnsResCounterByOpcodeCode,current,,Entry in the resolver counter table. Entries are indexed by DNS OpCode.
.1.3.6.1.2.1.32.2.1.2.3.1.1,DNS-RESOLVER-MIB::dnsResCounterByOpcodeCode,INTEGER,not-accessible,,current,,The index to this table. The OpCodes that have already been defined are found in RFC-1035.
.1.3.6.1.2.1.32.2.1.2.3.1.2,DNS-RESOLVER-MIB::dnsResCounterByOpcodeQueries,Counter32,read-only,,current,,Total number of queries that have sent out by the resolver since initialization for the OpCode which is the index to this row of the table.
.1.3.6.1.2.1.32.2.1.2.3.1.3,DNS-RESOLVER-MIB::dnsResCounterByOpcodeResponses,Counter32,read-only,,current,,Total number of responses that have been received by the resolver since initialization for the OpCode which is the index to this row of the table.
.1.3.6.1.2.1.32.2.1.2.4,DNS-RESOLVER-MIB::dnsResCounterByRcodeTable,,not-accessible,,current,,Table of the current count of responses to resolver queries.
.1.3.6.1.2.1.32.2.1.2.4.1,DNS-RESOLVER-MIB::dnsResCounterByRcodeEntry,,not-accessible,dnsResCounterByRcodeCode,current,,Entry in the resolver response table. Entries are indexed by DNS response code.
.1.3.6.1.2.1.32.2.1.2.4.1.1,DNS-RESOLVER-MIB::dnsResCounterByRcodeCode,INTEGER,not-accessible,,current,,The index to this table. The Response Codes that have already been defined are found in RFC-1035.
.1.3.6.1.2.1.32.2.1.2.4.1.2,DNS-RESOLVER-MIB::dnsResCounterByRcodeResponses,Counter32,read-only,,current,,Number of responses the resolver has received for the response code value which identifies this row of the table.
.1.3.6.1.2.1.32.2.1.2.5,DNS-RESOLVER-MIB::dnsResCounterNonAuthDataResps,Counter32,read-only,,current,,Number of requests made by the resolver for which a non-authoritative answer (cached data) was received.
.1.3.6.1.2.1.32.2.1.2.6,DNS-RESOLVER-MIB::dnsResCounterNonAuthNoDataResps,Counter32,read-only,,current,,Number of requests made by the resolver for which a non-authoritative answer - no such data response (empty answer) was received.
.1.3.6.1.2.1.32.2.1.2.7,DNS-RESOLVER-MIB::dnsResCounterMartians,Counter32,read-only,,current,,Number of responses received which were received from servers that the resolver does not think it asked.
.1.3.6.1.2.1.32.2.1.2.8,DNS-RESOLVER-MIB::dnsResCounterRecdResponses,Counter32,read-only,,current,,Number of responses received to all queries.
.1.3.6.1.2.1.32.2.1.2.9,DNS-RESOLVER-MIB::dnsResCounterUnparseResps,Counter32,read-only,,current,,Number of responses received which were unparseable.
.1.3.6.1.2.1.32.2.1.2.10,DNS-RESOLVER-MIB::dnsResCounterFallbacks,Counter32,read-only,,current,,Number of times the resolver had to fall back to its seat belt information.
.1.3.6.1.2.1.32.2.1.3,DNS-RESOLVER-MIB::dnsResLameDelegation,,,,,,
.1.3.6.1.2.1.32.2.1.3.1,DNS-RESOLVER-MIB::dnsResLameDelegationOverflows,Counter32,read-only,,current,,Number of times the resolver attempted to add an entry to the Lame Delegation table but was unable to for some reason such as space constraints.
.1.3.6.1.2.1.32.2.1.3.2,DNS-RESOLVER-MIB::dnsResLameDelegationTable,,not-accessible,,current,,Table of name servers returning lame delegations. A lame delegation has occured when a parent zone delegates authority for a child zone to a server that appears not to think that it is authoritative for the child zone in question.
.1.3.6.1.2.1.32.2.1.3.2.1,DNS-RESOLVER-MIB::dnsResLameDelegationEntry,,not-accessible,dnsResLameDelegationSource:dnsResLameDelegationName:dnsResLameDelegationClass,current,,Entry in lame delegation table. Only the resolver may create rows in this table. SNMP SET requests may be used to delete rows.
.1.3.6.1.2.1.32.2.1.3.2.1.1,DNS-RESOLVER-MIB::dnsResLameDelegationSource,IpAddress,not-accessible,,current,,Source of lame delegation.
.1.3.6.1.2.1.32.2.1.3.2.1.2,DNS-RESOLVER-MIB::dnsResLameDelegationName,OCTET,not-accessible,,current,,DNS name for which lame delegation was received.
.1.3.6.1.2.1.32.2.1.3.2.1.3,DNS-RESOLVER-MIB::dnsResLameDelegationClass,INTEGER,not-accessible,,current,,DNS class of received lame delegation.
.1.3.6.1.2.1.32.2.1.3.2.1.4,DNS-RESOLVER-MIB::dnsResLameDelegationCounts,Counter32,read-only,,current,,How many times this lame delegation has been received.
.1.3.6.1.2.1.32.2.1.3.2.1.5,DNS-RESOLVER-MIB::dnsResLameDelegationStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status column for the lame delegation table. Since only the agent (DNS resolver) creates rows in this table, the only values that a manager may write to this variable are active(1) and destroy(6).
.1.3.6.1.2.1.32.2.1.4,DNS-RESOLVER-MIB::dnsResCache,,,,,,
.1.3.6.1.2.1.32.2.1.4.1,DNS-RESOLVER-MIB::dnsResCacheStatus,INTEGER,read-write,,current,enabled(1):disabled(2):clear(3),Status/action for the resolver's cache. enabled(1) means that the use of the cache is allowed. Query operations can return this state. disabled(2) means that the cache is not being used. Query operations can return this state. Setting this variable to clear(3) deletes the entire contents of the resolver's cache, but does not otherwise change the resolver's state. The status will retain its previous value from before the clear operation (i.e., enabled(1) or disabled(2)). The value of clear(3) can NOT be returned by a query operation.
.1.3.6.1.2.1.32.2.1.4.2,DNS-RESOLVER-MIB::dnsResCacheMaxTTL,Gauge32,read-write,,current,,Maximum Time-To-Live for RRs in this cache. If the resolver does not implement a TTL ceiling, the value of this field should be zero.
.1.3.6.1.2.1.32.2.1.4.3,DNS-RESOLVER-MIB::dnsResCacheGoodCaches,Counter32,read-only,,current,,Number of RRs the resolver has cached successfully.
.1.3.6.1.2.1.32.2.1.4.4,DNS-RESOLVER-MIB::dnsResCacheBadCaches,Counter32,read-only,,current,,Number of RRs the resolver has refused to cache because they appear to be dangerous or irrelevant. E.g., RRs with suspiciously high TTLs, unsolicited root information, or that just don't appear to be relevant to the question the resolver asked.
.1.3.6.1.2.1.32.2.1.4.5,DNS-RESOLVER-MIB::dnsResCacheRRTable,,not-accessible,,current,,This table contains information about all the resource records currently in the resolver's cache.
.1.3.6.1.2.1.32.2.1.4.5.1,DNS-RESOLVER-MIB::dnsResCacheRREntry,,not-accessible,dnsResCacheRRName:dnsResCacheRRClass:dnsResCacheRRType:dnsResCacheRRIndex,current,,An entry in the resolvers's cache. Rows may be created only by the resolver. SNMP SET requests may be used to delete rows.
.1.3.6.1.2.1.32.2.1.4.5.1.1,DNS-RESOLVER-MIB::dnsResCacheRRName,OCTET,not-accessible,,current,,Owner name of the Resource Record in the cache which is identified in this row of the table. As described in RFC-1034, the owner of the record is the domain name were the RR is found.
.1.3.6.1.2.1.32.2.1.4.5.1.2,DNS-RESOLVER-MIB::dnsResCacheRRClass,INTEGER,not-accessible,,current,,DNS class of the Resource Record in the cache which is identified in this row of the table.
.1.3.6.1.2.1.32.2.1.4.5.1.3,DNS-RESOLVER-MIB::dnsResCacheRRType,INTEGER,not-accessible,,current,,DNS type of the Resource Record in the cache which is identified in this row of the table.
.1.3.6.1.2.1.32.2.1.4.5.1.4,DNS-RESOLVER-MIB::dnsResCacheRRTTL,Gauge32,read-only,,current,,Time-To-Live of RR in DNS cache. This is the initial TTL value which was received with the RR when it was originally received.
.1.3.6.1.2.1.32.2.1.4.5.1.5,DNS-RESOLVER-MIB::dnsResCacheRRElapsedTTL,Gauge32,read-only,,current,,Elapsed seconds since RR was received.
.1.3.6.1.2.1.32.2.1.4.5.1.6,DNS-RESOLVER-MIB::dnsResCacheRRSource,IpAddress,read-only,,current,,Host from which RR was received, 0.0.0.0 if unknown.
.1.3.6.1.2.1.32.2.1.4.5.1.7,DNS-RESOLVER-MIB::dnsResCacheRRData,OCTET,read-only,,current,,RDATA portion of a cached RR. The value is in the format defined for the particular DNS class and type of the resource record.
.1.3.6.1.2.1.32.2.1.4.5.1.8,DNS-RESOLVER-MIB::dnsResCacheRRStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status column for the resolver cache table. Since only the agent (DNS resolver) creates rows in this table, the only values that a manager may write to this variable are active(1) and destroy(6).
.1.3.6.1.2.1.32.2.1.4.5.1.9,DNS-RESOLVER-MIB::dnsResCacheRRIndex,Integer32,not-accessible,,current,,A value which makes entries in the table unique when the other index values (dnsResCacheRRName, dnsResCacheRRClass, and dnsResCacheRRType) do not provide a unique index.
.1.3.6.1.2.1.32.2.1.4.5.1.10,DNS-RESOLVER-MIB::dnsResCacheRRPrettyName,OCTET,read-only,,current,,Name of the RR at this row in the table. This is identical to the dnsResCacheRRName variable, except that character case is preserved in this variable, per DNS conventions.
.1.3.6.1.2.1.32.2.1.5,DNS-RESOLVER-MIB::dnsResNCache,,,,,,
.1.3.6.1.2.1.32.2.1.5.1,DNS-RESOLVER-MIB::dnsResNCacheStatus,INTEGER,read-write,,current,enabled(1):disabled(2):clear(3),Status/action for the resolver's negative response cache. enabled(1) means that the use of the negative response cache is allowed. Query operations can return this state. disabled(2) means that the negative response cache is not being used. Query operations can return this state. Setting this variable to clear(3) deletes the entire contents of the resolver's negative response cache. The status will retain its previous value from before the clear operation (i.e., enabled(1) or disabled(2)). The value of clear(3) can NOT be returned by a query operation.
.1.3.6.1.2.1.32.2.1.5.2,DNS-RESOLVER-MIB::dnsResNCacheMaxTTL,Gauge32,read-write,,current,,Maximum Time-To-Live for cached authoritative errors. If the resolver does not implement a TTL ceiling, the value of this field should be zero.
.1.3.6.1.2.1.32.2.1.5.3,DNS-RESOLVER-MIB::dnsResNCacheGoodNCaches,Counter32,read-only,,current,,Number of authoritative errors the resolver has cached successfully.
.1.3.6.1.2.1.32.2.1.5.4,DNS-RESOLVER-MIB::dnsResNCacheBadNCaches,Counter32,read-only,,current,,Number of authoritative errors the resolver would have liked to cache but was unable to because the appropriate SOA RR was not supplied or looked suspicious.
.1.3.6.1.2.1.32.2.1.5.5,DNS-RESOLVER-MIB::dnsResNCacheErrTable,,not-accessible,,current,,The resolver's negative response cache. This table contains information about authoritative errors that have been cached by the resolver.
.1.3.6.1.2.1.32.2.1.5.5.1,DNS-RESOLVER-MIB::dnsResNCacheErrEntry,,not-accessible,dnsResNCacheErrQName:dnsResNCacheErrQClass:dnsResNCacheErrQType:dnsResNCacheErrIndex,current,,An entry in the resolver's negative response cache table. Only the resolver can create rows. SNMP SET requests may be used to delete rows.
.1.3.6.1.2.1.32.2.1.5.5.1.1,DNS-RESOLVER-MIB::dnsResNCacheErrQName,OCTET,not-accessible,,current,,QNAME associated with a cached authoritative error.
.1.3.6.1.2.1.32.2.1.5.5.1.2,DNS-RESOLVER-MIB::dnsResNCacheErrQClass,INTEGER,not-accessible,,current,,DNS QCLASS associated with a cached authoritative error.
.1.3.6.1.2.1.32.2.1.5.5.1.3,DNS-RESOLVER-MIB::dnsResNCacheErrQType,INTEGER,not-accessible,,current,,DNS QTYPE associated with a cached authoritative error.
.1.3.6.1.2.1.32.2.1.5.5.1.4,DNS-RESOLVER-MIB::dnsResNCacheErrTTL,Gauge32,read-only,,current,,Time-To-Live of a cached authoritative error at the time of the error, it should not be decremented by the number of seconds since it was received. This should be the TTL as copied from the MINIMUM field of the SOA that accompanied the authoritative error, or a smaller value if the resolver implements a ceiling on negative response cache TTLs.
.1.3.6.1.2.1.32.2.1.5.5.1.5,DNS-RESOLVER-MIB::dnsResNCacheErrElapsedTTL,Gauge32,read-only,,current,,Elapsed seconds since authoritative error was received.
.1.3.6.1.2.1.32.2.1.5.5.1.6,DNS-RESOLVER-MIB::dnsResNCacheErrSource,IpAddress,read-only,,current,,Host which sent the authoritative error, 0.0.0.0 if unknown.
.1.3.6.1.2.1.32.2.1.5.5.1.7,DNS-RESOLVER-MIB::dnsResNCacheErrCode,INTEGER,read-only,,current,nonexistantName(1):noData(2):other(3),The authoritative error that has been cached: nonexistantName(1) indicates an authoritative name error (RCODE = 3). noData(2) indicates an authoritative response with no error (RCODE = 0) and no relevant data. other(3) indicates some other cached authoritative error. At present, no such errors are known to exist.
.1.3.6.1.2.1.32.2.1.5.5.1.8,DNS-RESOLVER-MIB::dnsResNCacheErrStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status column for the resolver negative response cache table. Since only the agent (DNS resolver) creates rows in this table, the only values that a manager may write to this variable are active(1) and destroy(6).
.1.3.6.1.2.1.32.2.1.5.5.1.9,DNS-RESOLVER-MIB::dnsResNCacheErrIndex,Integer32,read-only,,current,,A value which makes entries in the table unique when the other index values (dnsResNCacheErrQName, dnsResNCacheErrQClass, and dnsResNCacheErrQType) do not provide a unique index.
.1.3.6.1.2.1.32.2.1.5.5.1.10,DNS-RESOLVER-MIB::dnsResNCacheErrPrettyName,OCTET,read-only,,current,,QNAME associated with this row in the table. This is identical to the dnsResNCacheErrQName variable, except that character case is preserved in this variable, per DNS conventions.
.1.3.6.1.2.1.32.2.1.6,DNS-RESOLVER-MIB::dnsResOptCounter,,,,,,
.1.3.6.1.2.1.32.2.1.6.1,DNS-RESOLVER-MIB::dnsResOptCounterReferals,Counter32,read-only,,current,,Number of responses which were received from servers redirecting query to another server.
.1.3.6.1.2.1.32.2.1.6.2,DNS-RESOLVER-MIB::dnsResOptCounterRetrans,Counter32,read-only,,current,,Number requests retransmitted for all reasons.
.1.3.6.1.2.1.32.2.1.6.3,DNS-RESOLVER-MIB::dnsResOptCounterNoResponses,Counter32,read-only,,current,,Number of queries that were retransmitted because of no response.
.1.3.6.1.2.1.32.2.1.6.4,DNS-RESOLVER-MIB::dnsResOptCounterRootRetrans,Counter32,read-only,,current,,Number of queries that were retransmitted that were to root servers.
.1.3.6.1.2.1.32.2.1.6.5,DNS-RESOLVER-MIB::dnsResOptCounterInternals,Counter32,read-only,,current,,Number of requests internally generated by the resolver.
.1.3.6.1.2.1.32.2.1.6.6,DNS-RESOLVER-MIB::dnsResOptCounterInternalTimeOuts,Counter32,read-only,,current,,Number of requests internally generated which timed out.
.1.3.6.1.2.1.32.2.2,DNS-RESOLVER-MIB::dnsResMIBGroups,,,,,,
.1.3.6.1.2.1.32.2.2.1,DNS-RESOLVER-MIB::dnsResConfigGroup,,,,,,A collection of objects providing basic configuration information for a DNS resolver implementation.
.1.3.6.1.2.1.32.2.2.2,DNS-RESOLVER-MIB::dnsResCounterGroup,,,,,,A collection of objects providing basic instrumentation of a DNS resolver implementation.
.1.3.6.1.2.1.32.2.2.3,DNS-RESOLVER-MIB::dnsResLameDelegationGroup,,,,,,A collection of objects providing instrumentation of `lame delegation' failures.
.1.3.6.1.2.1.32.2.2.4,DNS-RESOLVER-MIB::dnsResCacheGroup,,,,,,A collection of objects providing access to and control of a DNS resolver's cache.
.1.3.6.1.2.1.32.2.2.5,DNS-RESOLVER-MIB::dnsResNCacheGroup,,,,,,A collection of objects providing access to and control of a DNS resolver's negative response cache.
.1.3.6.1.2.1.32.2.2.6,DNS-RESOLVER-MIB::dnsResOptCounterGroup,,,,,,A collection of objects providing further instrumentation applicable to many but not all DNS resolvers.
.1.3.6.1.2.1.32.2.3,DNS-RESOLVER-MIB::dnsResMIBCompliances,,,,,,
.1.3.6.1.2.1.32.2.3.1,DNS-RESOLVER-MIB::dnsResMIBCompliance,,,,,,The compliance statement for agents implementing the DNS resolver MIB extensions.
.1.3.6.1.2.1.47,ENTITY-MIB::entityMIB,,,,,,The MIB module for representing multiple logical entities supported by a single SNMP agent. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
.1.3.6.1.2.1.47.1,ENTITY-MIB::entityMIBObjects,,,,,,
.1.3.6.1.2.1.47.1.1,ENTITY-MIB::entityPhysical,,,,,,
.1.3.6.1.2.1.47.1.1.1,ENTITY-MIB::entPhysicalTable,,not-accessible,,current,,This table contains one row per physical entity. There is always at least one row for an 'overall' physical entity.
.1.3.6.1.2.1.47.1.1.1.1,ENTITY-MIB::entPhysicalEntry,,not-accessible,entPhysicalIndex,current,,Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.
.1.3.6.1.2.1.47.1.1.1.1.1,ENTITY-MIB::entPhysicalIndex,Integer32,not-accessible,,current,,The index for this entry.
.1.3.6.1.2.1.47.1.1.1.1.2,ENTITY-MIB::entPhysicalDescr,OCTET,read-only,,current,,A textual description of physical entity. This object should contain a string that identifies the manufacturer's name for the physical entity and should be set to a distinct value for each version or model of the physical entity.
.1.3.6.1.2.1.47.1.1.1.1.3,ENTITY-MIB::entPhysicalVendorType,OBJECT,read-only,,current,,An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II's sysObjectID. An agent should set this object to an enterprise-specific registration identifier value indicating the specific equipment type in detail. The associated instance of entPhysicalClass is used to indicate the general type of hardware device. If no vendor-specific registration identifier exists for this physical entity, or the value is unknown by this agent, then the value { 0 0 } is returned.
.1.3.6.1.2.1.47.1.1.1.1.4,ENTITY-MIB::entPhysicalContainedIn,Integer32,read-only,,current,,The value of entPhysicalIndex for the physical entity that 'contains' this physical entity. A value of zero indicates this physical entity is not contained in any other physical entity. Note that the set of 'containment' relationships define a strict hierarchy; that is, recursion is not allowed. In the event that a physical entity is contained by more than one physical entity (e.g., double-wide modules), this object should identify the containing entity with the lowest value of entPhysicalIndex.
.1.3.6.1.2.1.47.1.1.1.1.5,ENTITY-MIB::entPhysicalClass,INTEGER,read-only,,current,other(1):unknown(2):chassis(3):backplane(4):container(5):powerSupply(6):fan(7):sensor(8):module(9):port(10):stack(11):cpu(12):energyObject(13):battery(14):storageDrive(15),An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value that most accurately indicates the general class of the physical entity, or the primary class if there is more than one entity. If no appropriate standard registration identifier exists for this physical entity, then the value 'other(1)' is returned. If the value is unknown by this agent, then the value 'unknown(2)' is returned.
.1.3.6.1.2.1.47.1.1.1.1.6,ENTITY-MIB::entPhysicalParentRelPos,Integer32,read-only,,current,,An indication of the relative position of this 'child' component among all its 'sibling' components. Sibling components are defined as entPhysicalEntries that share the same instance values of each of the entPhysicalContainedIn and entPhysicalClass objects. An NMS can use this object to identify the relative ordering for all sibling components of a particular parent (identified by the entPhysicalContainedIn instance in each sibling entry). If possible, this value should match any external labeling of the physical component. For example, for a container (e.g., card slot) labeled as 'slot #3', entPhysicalParentRelPos should have the value '3'. Note that the entPhysicalEntry for the module plugged in slot 3 should have an entPhysicalParentRelPos value of '1'. If the physical position of this component does not match any external numbering or clearly visible ordering, then user documentation or other external reference material should be used to determine the parent-relative position. If this is not possible, then the agent should assign a consistent (but possibly arbitrary) ordering to a given set of 'sibling' components, perhaps based on internal representation of the components. If the agent cannot determine the parent-relative position for some reason, or if the associated value of entPhysicalContainedIn is '0', then the value '-1' is returned. Otherwise, a non-negative integer is returned, indicating the parent-relative position of this physical entity. Parent-relative ordering normally starts from '1' and continues to 'N', where 'N' represents the highest positioned child entity. However, if the physical entities (e.g., slots) are labeled from a starting position of zero, then the first sibling should be associated with an entPhysicalParentRelPos value of '0'. Note that this ordering may be sparse or dense, depending on agent implementation. The actual values returned are not globally meaningful, as each 'parent' component may use different numbering algorithms. The ordering is only meaningful among siblings of the same parent component. The agent should retain parent-relative position values across reboots, either through algorithmic assignment or use of non-volatile storage.
.1.3.6.1.2.1.47.1.1.1.1.7,ENTITY-MIB::entPhysicalName,OCTET,read-only,,current,,The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device's 'console'. This might be a text name (e.g., 'console') or a simple component number (e.g., port or module number, such as '1'), depending on the physical component naming syntax of the device. If there is no local name, or if this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of entPhysicalName for two physical entities will be the same in the event that the console interface does not distinguish between them, e.g., slot-1 and the card in slot-1.
.1.3.6.1.2.1.47.1.1.1.1.8,ENTITY-MIB::entPhysicalHardwareRev,OCTET,read-only,,current,,The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format in an implementation-specific manner. If no specific hardware revision string is associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.9,ENTITY-MIB::entPhysicalFirmwareRev,OCTET,read-only,,current,,The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format in an implementation-specific manner. If no specific firmware programs are associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.10,ENTITY-MIB::entPhysicalSoftwareRev,OCTET,read-only,,current,,The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format in an implementation-specific manner. If no specific software programs are associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.11,ENTITY-MIB::entPhysicalSerialNum,OCTET,read-write,,current,,The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present). On the first instantiation of a physical entity, the value of entPhysicalSerialNum associated with that entity is set to the correct vendor-assigned serial number, if this information is available to the agent. If a serial number is unknown or non-existent, the entPhysicalSerialNum will be set to a zero-length string instead. Note that implementations that can correctly identify the serial numbers of all installed physical entities do not need to provide write access to the entPhysicalSerialNum object. Agents that cannot provide non-volatile storage for the entPhysicalSerialNum strings are not required to implement write access for this object. Not every physical component will have a serial number, or even need one. Physical entities for which the associated value of the entPhysicalIsFRU object is equal to 'false(2)' (e.g., the repeater ports within a repeater module) do not need their own unique serial numbers. An agent does not have to provide write access for such entities and may return a zero-length string. If write access is implemented for an instance of entPhysicalSerialNum and a value is written into the instance, the agent must retain the supplied value in the entPhysicalSerialNum instance (associated with the same physical entity) for as long as that entity remains instantiated. This includes instantiations across all re-initializations/reboots of the network management system, including those resulting in a change of the physical entity's entPhysicalIndex value.
.1.3.6.1.2.1.47.1.1.1.1.12,ENTITY-MIB::entPhysicalMfgName,OCTET,read-only,,current,,The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present). Note that comparisons between instances of the entPhysicalModelName, entPhysicalFirmwareRev, entPhysicalSoftwareRev, and the entPhysicalSerialNum objects are only meaningful amongst entPhysicalEntries with the same value of entPhysicalMfgName. If the manufacturer name string associated with the physical component is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.13,ENTITY-MIB::entPhysicalModelName,OCTET,read-only,,current,,The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself. If the model name string associated with the physical component is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.14,ENTITY-MIB::entPhysicalAlias,OCTET,read-write,,current,,This object is an 'alias' name for the physical entity, as specified by a network manager, and provides a non-volatile 'handle' for the physical entity. On the first instantiation of a physical entity, the value of entPhysicalAlias associated with that entity is set to the zero-length string. However, the agent may set the value to a locally unique default value, instead of a zero-length string. If write access is implemented for an instance of entPhysicalAlias and a value is written into the instance, the agent must retain the supplied value in the entPhysicalAlias instance (associated with the same physical entity) for as long as that entity remains instantiated. This includes instantiations across all re-initializations/reboots of the network management system, including those resulting in a change of the physical entity's entPhysicalIndex value.
.1.3.6.1.2.1.47.1.1.1.1.15,ENTITY-MIB::entPhysicalAssetID,OCTET,read-write,,current,,This object is a user-assigned asset tracking identifier (as specified by a network manager) for the physical entity and provides non-volatile storage of this information. On the first instantiation of a physical entity, the value of entPhysicalAssetID associated with that entity is set to the zero-length string. Not every physical component will have an asset tracking identifier or even need one. Physical entities for which the associated value of the entPhysicalIsFRU object is equal to 'false(2)' (e.g., the repeater ports within a repeater module) do not need their own unique asset tracking identifier. An agent does not have to provide write access for such entities and may instead return a zero-length string. If write access is implemented for an instance of entPhysicalAssetID and a value is written into the instance, the agent must retain the supplied value in the entPhysicalAssetID instance (associated with the same physical entity) for as long as that entity remains instantiated. This includes instantiations across all re-initializations/reboots of the network management system, including those resulting in a change of the physical entity's entPhysicalIndex value. If no asset tracking information is associated with the physical component, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.16,ENTITY-MIB::entPhysicalIsFRU,INTEGER,read-only,,current,true(1):false(2),This object indicates whether or not this physical entity is considered a 'field replaceable unit' by the vendor. If this object contains the value 'true(1)', then this entPhysicalEntry identifies a field replaceable unit. For all entPhysicalEntries that represent components permanently contained within a field replaceable unit, the value 'false(2)' should be returned for this object.
.1.3.6.1.2.1.47.1.1.1.1.17,ENTITY-MIB::entPhysicalMfgDate,OCTET,read-only,,current,,This object contains the date of manufacturing of the managed entity. If the manufacturing date is unknown or not supported, the object is not instantiated. The special value '0000000000000000'H may also be returned in this case.
.1.3.6.1.2.1.47.1.1.1.1.18,ENTITY-MIB::entPhysicalUris,OCTET,read-write,,current,,This object contains identification information about the physical entity. The object contains URIs; therefore, the syntax of this object must conform to RFC 3986, Section 3. Multiple URIs may be present and are separated by white space characters. Leading and trailing white space characters are ignored. If no URI identification information is known about the physical entity, the object is not instantiated. A zero-length octet string may also be returned in this case.
.1.3.6.1.2.1.47.1.1.1.1.19,ENTITY-MIB::entPhysicalUUID,OCTET,read-only,,current,,This object contains identification information about the physical entity. The object contains a Universally Unique Identifier, the syntax of this object must conform to RFC 4122, Section 4.1. A zero-length octet string is returned if no UUID information is known.
.1.3.6.1.2.1.47.1.2,ENTITY-MIB::entityLogical,,,,,,
.1.3.6.1.2.1.47.1.2.1,ENTITY-MIB::entLogicalTable,,not-accessible,,current,,This table contains one row per logical entity. For agents that implement more than one naming scope, at least one entry must exist. Agents that instantiate all MIB objects within a single naming scope are not required to implement this table.
.1.3.6.1.2.1.47.1.2.1.1,ENTITY-MIB::entLogicalEntry,,not-accessible,entLogicalIndex,current,,Information about a particular logical entity. Entities may be managed by this agent or other SNMP agents (possibly) in the same chassis.
.1.3.6.1.2.1.47.1.2.1.1.1,ENTITY-MIB::entLogicalIndex,Integer32,not-accessible,,current,,The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are not necessarily contiguous.
.1.3.6.1.2.1.47.1.2.1.1.2,ENTITY-MIB::entLogicalDescr,OCTET,read-only,,current,,A textual description of the logical entity. This object should contain a string that identifies the manufacturer's name for the logical entity and should be set to a distinct value for each version of the logical entity.
.1.3.6.1.2.1.47.1.2.1.1.3,ENTITY-MIB::entLogicalType,OBJECT,read-only,,current,,An indication of the type of logical entity. This will typically be the OBJECT IDENTIFIER name of the node in the SMI's naming hierarchy that represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. For example: a logical entity of a regular host/router -> mib-2 a logical entity of a 802.1d bridge -> dot1dBridge a logical entity of a 802.3 repeater -> snmpDot3RptrMgmt If an appropriate node in the SMI's naming hierarchy cannot be identified, the value 'mib-2' should be used.
.1.3.6.1.2.1.47.1.2.1.1.4,ENTITY-MIB::entLogicalCommunity,OCTET,read-only,,deprecated,,An SNMPv1 or SNMPv2c community string, which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read-write community string. However, the agent must take care not to return a community string that allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities, represented by the same value of entLogicalCommunity, have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2c, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent or if no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents that implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object or may continue to return a community string (e.g., tri-lingual agent support).
.1.3.6.1.2.1.47.1.2.1.1.5,ENTITY-MIB::entLogicalTAddress,OCTET,read-only,,current,,The transport service address by which the logical entity receives network management traffic, formatted according to the corresponding value of entLogicalTDomain. For snmpUDPDomain, a TAddress is 6 octets long: the initial 4 octets contain the IP-address in network-byte order, and the last 2 contain the UDP port in network-byte order. Consult RFC 3417 for further information on snmpUDPDomain.
.1.3.6.1.2.1.47.1.2.1.1.6,ENTITY-MIB::entLogicalTDomain,OBJECT,read-only,,current,,Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are presently found in RFC 3417.
.1.3.6.1.2.1.47.1.2.1.1.7,ENTITY-MIB::entLogicalContextEngineID,OCTET,read-only,,current,,The authoritative contextEngineID that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated 'entLogicalTAddress/entLogicalTDomain' pair. This object, together with the associated entLogicalContextName object, defines the context associated with a particular logical entity and allows access to SNMP engines identified by a contextEngineID and contextName pair. If no value has been configured by the agent, a zero-length string is returned, or the agent may choose not to instantiate this object at all.
.1.3.6.1.2.1.47.1.2.1.1.8,ENTITY-MIB::entLogicalContextName,OCTET,read-only,,current,,The contextName that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated 'entLogicalTAddress/entLogicalTDomain' pair. This object, together with the associated entLogicalContextEngineID object, defines the context associated with a particular logical entity and allows access to SNMP engines identified by a contextEngineID and contextName pair. If no value has been configured by the agent, a zero-length string is returned, or the agent may choose not to instantiate this object at all.
.1.3.6.1.2.1.47.1.3,ENTITY-MIB::entityMapping,,,,,,
.1.3.6.1.2.1.47.1.3.1,ENTITY-MIB::entLPMappingTable,,not-accessible,,current,,This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more mappings to the physical resources, which are used to realize that logical entity. An agent should limit the number and nature of entries in this table such that only meaningful and non-redundant information is returned. For example, in a system that contains a single power supply, mappings between logical entities and the power supply are not useful and should not be included. Also, only the most appropriate physical component, which is closest to the root of a particular containment tree, should be identified in an entLPMapping entry. For example, suppose a bridge is realized on a particular module, and all ports on that module are ports on this bridge. A mapping between the bridge and the module would be useful, but additional mappings between the bridge and each of the ports on that module would be redundant (because the entPhysicalContainedIn hierarchy can provide the same information). On the other hand, if more than one bridge were utilizing ports on this module, then mappings between each bridge and the ports it used would be appropriate. Also, in the case of a single backplane repeater, a mapping for the backplane to the single repeater entity is not necessary.
.1.3.6.1.2.1.47.1.3.1.1,ENTITY-MIB::entLPMappingEntry,,not-accessible,entLogicalIndex:entLPPhysicalIndex,current,,Information about a particular logical-entity-to-physical- equipment association. Note that the nature of the association is not specifically identified in this entry. It is expected that sufficient information exists in the MIB modules used to manage a particular logical entity to infer how physical component information is utilized.
.1.3.6.1.2.1.47.1.3.1.1.1,ENTITY-MIB::entLPPhysicalIndex,Integer32,read-only,,current,,The value of this object identifies the index value of a particular entPhysicalEntry associated with the indicated entLogicalEntity.
.1.3.6.1.2.1.47.1.3.2,ENTITY-MIB::entAliasMappingTable,,not-accessible,,current,,This table contains zero or more rows, representing mappings of logical entities and physical components to external MIB identifiers. Each physical port in the system may be associated with a mapping to an external identifier, which itself is associated with a particular logical entity's naming scope. A 'wildcard' mechanism is provided to indicate that an identifier is associated with more than one logical entity.
.1.3.6.1.2.1.47.1.3.2.1,ENTITY-MIB::entAliasMappingEntry,,not-accessible,entPhysicalIndex:entAliasLogicalIndexOrZero,current,,Information about a particular binding between a logical entity/physical component pair and an external identifier. Each logical entity/physical component pair may be associated with one alias mapping. The logical entity index may also be used as a 'wildcard' (refer to the entAliasLogicalIndexOrZero objectclause for details.) Note that only entPhysicalIndex values that represent physical ports (i.e., associated entPhysicalClass value is 'port(10)') are permitted to exist in this table.
.1.3.6.1.2.1.47.1.3.2.1.1,ENTITY-MIB::entAliasLogicalIndexOrZero,Integer32,not-accessible,,current,,The value of this object identifies the logical entity that defines the naming scope for the associated instance of the entAliasMappingIdentifier object. If this object has a non-zero value, then it identifies the logical entity named by the same value of entLogicalIndex. If this object has a value of zero, then the mapping between the physical component and the alias identifier for this entAliasMapping entry is associated with all unspecified logical entities. That is, a value of zero (the default mapping) identifies any logical entity that does not have an explicit entry in this table for a particular entPhysicalIndex/entAliasMappingIdentifier pair. For example, to indicate that a particular interface (e.g., physical component 33) is identified by the same value of ifIndex for all logical entities, the following instance might exist: entAliasMappingIdentifier.33.0 = ifIndex.5 In the event an entPhysicalEntry is associated differently for some logical entities, additional entAliasMapping entries may exist, e.g.: entAliasMappingIdentifier.33.0 = ifIndex.6 entAliasMappingIdentifier.33.4 = ifIndex.1 entAliasMappingIdentifier.33.5 = ifIndex.1 entAliasMappingIdentifier.33.10 = ifIndex.12 Note that entries with non-zero entAliasLogicalIndexOrZero index values have precedence over zero-indexed entries. In this example, all logical entities except 4, 5, and 10 associate physical entity 33 with ifIndex.6.
.1.3.6.1.2.1.47.1.3.2.1.2,ENTITY-MIB::entAliasMappingIdentifier,OBJECT,read-only,,current,,The value of this object identifies a particular conceptual row associated with the indicated entPhysicalIndex and entLogicalIndex pair. Because only physical ports are modeled in this table, only entries that represent interfaces or ports are allowed. If an ifEntry exists on behalf of a particular physical port, then this object should identify the associated ifEntry. For repeater ports, the appropriate row in the 'rptrPortGroupTable' should be identified instead. For example, suppose a physical port was represented by entPhysicalEntry.3, entLogicalEntry.15 existed for a repeater, and entLogicalEntry.22 existed for a bridge. Then there might be two related instances of entAliasMappingIdentifier: entAliasMappingIdentifier.3.15 == rptrPortGroupIndex.5.2 entAliasMappingIdentifier.3.22 == ifIndex.17 It is possible that other mappings (besides interfaces and repeater ports) may be defined in the future, as required. Bridge ports are identified by examining the Bridge MIB and appropriate ifEntries associated with each 'dot1dBasePort' and are thus not represented in this table.
.1.3.6.1.2.1.47.1.3.3,ENTITY-MIB::entPhysicalContainsTable,,not-accessible,,current,,A table that exposes the container/'containee' relationships between physical entities. This table provides all the information found by constructing the virtual containment tree for a given entPhysicalTable, but in a more direct format. In the event a physical entity is contained by more than one other physical entity (e.g., double-wide modules), this table should include these additional mappings, which cannot be represented in the entPhysicalTable virtual containment tree.
.1.3.6.1.2.1.47.1.3.3.1,ENTITY-MIB::entPhysicalContainsEntry,,not-accessible,entPhysicalIndex:entPhysicalChildIndex,current,,A single container/'containee' relationship.
.1.3.6.1.2.1.47.1.3.3.1.1,ENTITY-MIB::entPhysicalChildIndex,Integer32,read-only,,current,,The value of entPhysicalIndex for the contained physical entity.
.1.3.6.1.2.1.47.1.4,ENTITY-MIB::entityGeneral,,,,,,
.1.3.6.1.2.1.47.1.4.1,ENTITY-MIB::entLastChangeTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time a conceptual row is created, modified, or deleted in any of these tables: - entPhysicalTable - entLogicalTable - entLPMappingTable - entAliasMappingTable - entPhysicalContainsTable 
.1.3.6.1.2.1.47.2,ENTITY-MIB::entityMIBTraps,,,,,,
.1.3.6.1.2.1.47.2.0,ENTITY-MIB::entityMIBTrapPrefix,,,,,,
.1.3.6.1.2.1.47.2.0.1,ENTITY-MIB::entConfigChange,,,,,,An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations. If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away. An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.
.1.3.6.1.2.1.47.3,ENTITY-MIB::entityConformance,,,,,,
.1.3.6.1.2.1.47.3.1,ENTITY-MIB::entityCompliances,,,,,,
.1.3.6.1.2.1.47.3.1.1,ENTITY-MIB::entityCompliance,,,,,,The compliance statement for SNMP entities that implement version 1 of the Entity MIB.
.1.3.6.1.2.1.47.3.1.2,ENTITY-MIB::entity2Compliance,,,,,,The compliance statement for SNMP entities that implement version 2 of the Entity MIB.
.1.3.6.1.2.1.47.3.1.3,ENTITY-MIB::entity3Compliance,,,,,,The compliance statement for SNMP entities that implement version 3 of the Entity MIB.
.1.3.6.1.2.1.47.3.1.4,ENTITY-MIB::entity4Compliance,,,,,,The compliance statement for SNMP entities that implement the full version 4 (full compliance) of the Entity MIB.
.1.3.6.1.2.1.47.3.1.5,ENTITY-MIB::entity4CRCompliance,,,,,,The compliance statement for SNMP entities that implement version 4 of the Entity MIB on devices with constrained resources.
.1.3.6.1.2.1.47.3.2,ENTITY-MIB::entityGroups,,,,,,
.1.3.6.1.2.1.47.3.2.1,ENTITY-MIB::entityPhysicalGroup,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.2,ENTITY-MIB::entityLogicalGroup,,,,,,The collection of objects used to represent the list of logical entities for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.3,ENTITY-MIB::entityMappingGroup,,,,,,The collection of objects used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.4,ENTITY-MIB::entityGeneralGroup,,,,,,The collection of objects used to represent general entity information for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.5,ENTITY-MIB::entityNotificationsGroup,,,,,,The collection of notifications used to indicate Entity MIB data consistency and general status information.
.1.3.6.1.2.1.47.3.2.6,ENTITY-MIB::entityPhysical2Group,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
.1.3.6.1.2.1.47.3.2.7,ENTITY-MIB::entityLogical2Group,,,,,,The collection of objects used to represent the list of logical entities for which a single SNMP entity provides management information.
.1.3.6.1.2.1.47.3.2.8,ENTITY-MIB::entityPhysical3Group,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
.1.3.6.1.2.1.47.3.2.9,ENTITY-MIB::entityPhysical4Group,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup and entityPhysicalCRGroup.
.1.3.6.1.2.1.47.3.2.10,ENTITY-MIB::entityPhysicalCRGroup,,,,,,The collection of objects used to represent physical system components for constrained resourced devices, for which a single agent provides management information.
.1.3.6.1.2.1.48,IP-MIB::ipMIB,,,,,,The MIB module for managing IP and ICMP implementations, but excluding their management of IP routes. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4293; see the RFC itself for full legal notices.
.1.3.6.1.2.1.48.2,IP-MIB::ipMIBConformance,,,,,,
.1.3.6.1.2.1.48.2.1,IP-MIB::ipMIBCompliances,,,,,,
.1.3.6.1.2.1.48.2.1.1,IP-MIB::ipMIBCompliance,,,,,,The compliance statement for systems that implement only IPv4. For version-independence, this compliance statement is deprecated in favor of ipMIBCompliance2.
.1.3.6.1.2.1.48.2.1.2,IP-MIB::ipMIBCompliance2,,,,,,The compliance statement for systems that implement IP - either IPv4 or IPv6. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which we have the following compliance requirements, expressed in OBJECT clause form in this description clause: -- OBJECT ipSystemStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipIfStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpMsgStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipAddressPrefixType -- SYNTAX InetAddressType {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 address types. -- -- OBJECT ipAddressPrefixPrefix -- SYNTAX InetAddress (Size(4 | 16)) -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 addresses and so the size can be either 4 or -- 16 bytes. -- -- OBJECT ipAddressAddrType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipAddressAddr -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipNetToPhysicalNetAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipNetToPhysicalNetAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipDefaultRouterAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipDefaultRouterAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes.
.1.3.6.1.2.1.48.2.2,IP-MIB::ipMIBGroups,,,,,,
.1.3.6.1.2.1.48.2.2.1,IP-MIB::ipGroup,,,,,,The ip group of objects providing for basic management of IP entities, exclusive of the management of IP routes. As part of the version independence, this group has been deprecated. 
.1.3.6.1.2.1.48.2.2.2,IP-MIB::icmpGroup,,,,,,The icmp group of objects providing ICMP statistics. As part of the version independence, this group has been deprecated. 
.1.3.6.1.2.1.48.2.2.3,IP-MIB::ipv4GeneralGroup,,,,,,The group of IPv4-specific objects for basic management of IPv4 entities.
.1.3.6.1.2.1.48.2.2.4,IP-MIB::ipv4IfGroup,,,,,,The group of IPv4-specific objects for basic management of IPv4 interfaces.
.1.3.6.1.2.1.48.2.2.5,IP-MIB::ipv6GeneralGroup2,,,,,,The IPv6 group of objects providing for basic management of IPv6 entities.
.1.3.6.1.2.1.48.2.2.6,IP-MIB::ipv6IfGroup,,,,,,The group of IPv6-specific objects for basic management of IPv6 interfaces.
.1.3.6.1.2.1.48.2.2.7,IP-MIB::ipLastChangeGroup,,,,,,The last change objects associated with this MIB. These objects are optional for all agents. They SHOULD be implemented on agents where it is possible to determine the proper values. Where it is not possible to determine the proper values, for example when the tables are split amongst several sub-agents using AgentX, the agent MUST NOT implement these objects to return an incorrect or static value.
.1.3.6.1.2.1.48.2.2.8,IP-MIB::ipSystemStatsGroup,,,,,,IP system wide statistics.
.1.3.6.1.2.1.48.2.2.9,IP-MIB::ipv4SystemStatsGroup,,,,,,IPv4 only system wide statistics.
.1.3.6.1.2.1.48.2.2.10,IP-MIB::ipSystemStatsHCOctetGroup,,,,,,IP system wide statistics for systems that may overflow the standard octet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.11,IP-MIB::ipSystemStatsHCPacketGroup,,,,,,IP system wide statistics for systems that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.12,IP-MIB::ipv4SystemStatsHCPacketGroup,,,,,,IPv4 only system wide statistics for systems that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.13,IP-MIB::ipIfStatsGroup,,,,,,IP per-interface statistics.
.1.3.6.1.2.1.48.2.2.14,IP-MIB::ipv4IfStatsGroup,,,,,,IPv4 only per-interface statistics.
.1.3.6.1.2.1.48.2.2.15,IP-MIB::ipIfStatsHCOctetGroup,,,,,,IP per-interfaces statistics for systems that include interfaces that may overflow the standard octet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.16,IP-MIB::ipIfStatsHCPacketGroup,,,,,,IP per-interfaces statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.17,IP-MIB::ipv4IfStatsHCPacketGroup,,,,,,IPv4 only per-interface statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.18,IP-MIB::ipAddressPrefixGroup,,,,,,The group of objects for providing information about address prefixes used by this node.
.1.3.6.1.2.1.48.2.2.19,IP-MIB::ipAddressGroup,,,,,,The group of objects for providing information about the addresses relevant to this entity's interfaces.
.1.3.6.1.2.1.48.2.2.20,IP-MIB::ipNetToPhysicalGroup,,,,,,The group of objects for providing information about the mappings of network address to physical address known to this node.
.1.3.6.1.2.1.48.2.2.21,IP-MIB::ipv6ScopeGroup,,,,,,The group of objects for managing IPv6 scope zones.
.1.3.6.1.2.1.48.2.2.22,IP-MIB::ipDefaultRouterGroup,,,,,,The group of objects for providing information about default routers known to this node.
.1.3.6.1.2.1.48.2.2.23,IP-MIB::ipv6RouterAdvertGroup,,,,,,The group of objects for controlling information advertised by IPv6 routers.
.1.3.6.1.2.1.48.2.2.24,IP-MIB::icmpStatsGroup,,,,,,The group of objects providing ICMP statistics.
.1.3.6.1.2.1.76,INET-ADDRESS-MIB::inetAddressMIB,,,,,,This MIB module defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address, or a DNS domain name. This module also defines textual conventions for Internet port numbers, autonomous system numbers, and the length of an Internet address prefix. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4001, see the RFC itself for full legal notices.
.1.3.6.1.2.1.84,IANA-RTPROTO-MIB::ianaRtProtoMIB,,,,,,This MIB module defines the IANAipRouteProtocol and IANAipMRouteProtocol textual conventions for use in MIBs which need to identify unicast or multicast routing mechanisms. Any additions or changes to the contents of this MIB module require either publication of an RFC, or Designated Expert Review as defined in RFC 2434, Guidelines for Writing an IANA Considerations Section in RFCs. The Designated Expert will be selected by the IESG Area Director(s) of the Routing Area.
.1.3.6.1.2.1.99,ENTITY-SENSOR-MIB::entitySensorMIB,,,,,,This module defines Entity MIB extensions for physical sensors. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3433; see the RFC itself for full legal notices.
.1.3.6.1.2.1.99.1,ENTITY-SENSOR-MIB::entitySensorObjects,,,,,,
.1.3.6.1.2.1.99.1.1,ENTITY-SENSOR-MIB::entPhySensorTable,,not-accessible,,current,,This table contains one row per physical sensor represented by an associated row in the entPhysicalTable.
.1.3.6.1.2.1.99.1.1.1,ENTITY-SENSOR-MIB::entPhySensorEntry,,not-accessible,entPhysicalIndex,current,,Information about a particular physical sensor. An entry in this table describes the present reading of a sensor, the measurement units and scale, and sensor operational status. Entries are created in this table by the agent. An entry for each physical sensor SHOULD be created at the same time as the associated entPhysicalEntry. An entry SHOULD be destroyed if the associated entPhysicalEntry is destroyed.
.1.3.6.1.2.1.99.1.1.1.1,ENTITY-SENSOR-MIB::entPhySensorType,INTEGER,read-only,,current,other(1):unknown(2):voltsAC(3):voltsDC(4):amperes(5):watts(6):hertz(7):celsius(8):percentRH(9):rpm(10):cmm(11):truthvalue(12),The type of data returned by the associated entPhySensorValue object. This object SHOULD be set by the agent during entry creation, and the value SHOULD NOT change during operation.
.1.3.6.1.2.1.99.1.1.1.2,ENTITY-SENSOR-MIB::entPhySensorScale,INTEGER,read-only,,current,yocto(1):zepto(2):atto(3):femto(4):pico(5):nano(6):micro(7):milli(8):units(9):kilo(10):mega(11):giga(12):tera(13):exa(14):peta(15):zetta(16):yotta(17),The exponent to apply to values returned by the associated entPhySensorValue object. This object SHOULD be set by the agent during entry creation, and the value SHOULD NOT change during operation.
.1.3.6.1.2.1.99.1.1.1.3,ENTITY-SENSOR-MIB::entPhySensorPrecision,Integer32,read-only,,current,,The number of decimal places of precision in fixed-point sensor values returned by the associated entPhySensorValue object. This object SHOULD be set to '0' when the associated entPhySensorType value is not a fixed-point type: e.g., 'percentRH(9)', 'rpm(10)', 'cmm(11)', or 'truthvalue(12)'. This object SHOULD be set by the agent during entry creation, and the value SHOULD NOT change during operation.
.1.3.6.1.2.1.99.1.1.1.4,ENTITY-SENSOR-MIB::entPhySensorValue,Integer32,read-only,,current,,The most recent measurement obtained by the agent for this sensor. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.
.1.3.6.1.2.1.99.1.1.1.5,ENTITY-SENSOR-MIB::entPhySensorOperStatus,INTEGER,read-only,,current,ok(1):unavailable(2):nonoperational(3),The operational status of the sensor.
.1.3.6.1.2.1.99.1.1.1.6,ENTITY-SENSOR-MIB::entPhySensorUnitsDisplay,OCTET,read-only,,current,,A textual description of the data units that should be used in the display of entPhySensorValue.
.1.3.6.1.2.1.99.1.1.1.7,ENTITY-SENSOR-MIB::entPhySensorValueTimeStamp,TimeTicks,read-only,,current,,The value of sysUpTime at the time the status and/or value of this sensor was last obtained by the agent.
.1.3.6.1.2.1.99.1.1.1.8,ENTITY-SENSOR-MIB::entPhySensorValueUpdateRate,Unsigned32,read-only,,current,,An indication of the frequency that the agent updates the associated entPhySensorValue object, representing in milliseconds. The value zero indicates: - the sensor value is updated on demand (e.g., when polled by the agent for a get-request), - the sensor value is updated when the sensor value changes (event-driven), - the agent does not know the update rate. 
.1.3.6.1.2.1.99.3,ENTITY-SENSOR-MIB::entitySensorConformance,,,,,,
.1.3.6.1.2.1.99.3.1,ENTITY-SENSOR-MIB::entitySensorCompliances,,,,,,
.1.3.6.1.2.1.99.3.1.1,ENTITY-SENSOR-MIB::entitySensorCompliance,,,,,,Describes the requirements for conformance to the Entity Sensor MIB module.
.1.3.6.1.2.1.99.3.2,ENTITY-SENSOR-MIB::entitySensorGroups,,,,,,
.1.3.6.1.2.1.99.3.2.1,ENTITY-SENSOR-MIB::entitySensorValueGroup,,,,,,A collection of objects representing physical entity sensor information.
.1.3.6.1.2.1.154,IANA-MAU-MIB::ianaMauMIB,,,,,,This MIB module defines dot3MauType OBJECT-IDENTITIES and IANAifMauListBits, IANAifMauMediaAvailable, IANAifMauAutoNegCapBits, and IANAifJackType TEXTUAL-CONVENTIONs, specifying enumerated values of the ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable, ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits / ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects respectively, defined in the MAU-MIB. It is intended that each new MAU type, Media Availability state, Auto Negotiation capability and/or Jack type defined by the IEEE 802.3 working group and approved for publication in a revision of IEEE Std 802.3 will be added to this MIB module, provided that it is suitable for being managed by the base objects in the MAU-MIB. An Expert Review, as defined in RFC 2434 [RFC2434], is REQUIRED for such additions. The following reference is used throughout this MIB module: [IEEE802.3] refers to: IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications'. This reference should be updated as appropriate when new MAU types, Media Availability states, Auto Negotiation capabilities, and/or Jack types are added to this MIB module. Copyright (C) The IETF Trust (2007). The initial version of this MIB module was published in RFC 4836; for full legal notices see the RFC itself. Supplementary information may be available at: http://www.ietf.org/copyrights/ianamib.html
.1.3.6.1.2.1.216,IANA-ENTITY-MIB::ianaEntityMIB,,,,,,This MIB module defines a TEXTUAL-CONVENTION that provides an indication of the general hardware type of a particular physical entity. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). The initial version of this MIB module was published in RFC 6933; for full legal notices see the RFC itself.
.1.3.6.1.2.1.217,UUID-TC-MIB::uuidTCMIB,,,,,,This MIB module defines TEXTUAL-CONVENTIONs representing Universally Unique IDentifiers (UUIDs). Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
.1.3.6.1.3,RFC1155-SMI::experimental,,,,,,
.1.3.6.1.4,RFC1155-SMI::private,,,,,,
.1.3.6.1.4.1,RFC1155-SMI::enterprises,,,,,,
.1.3.6.1.4.1.89,RADLAN-MIB::rnd,,,,,,
.1.3.6.1.4.1.89.0,RADLAN-MIB::rnd#,,,,,,
.1.3.6.1.4.1.89.0.3,RADLAN-MIB::rxOverflowHWFault,,,,,,An RX buffer overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number.
.1.3.6.1.4.1.89.0.4,RADLAN-MIB::txOverflowHWFault,,,,,,Interport queue overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number.
.1.3.6.1.4.1.89.0.5,RADLAN-MIB::routeTableOverflow,,,,,,An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
.1.3.6.1.4.1.89.0.10,RADLAN-MIB::resetRequired,,,,,,This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
.1.3.6.1.4.1.89.0.12,RADLAN-MIB::endTftp,,,,,,This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
.1.3.6.1.4.1.89.0.13,RADLAN-MIB::abortTftp,,,,,,This trap indicates that in the device aborted a TFTP session with the management station. Variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
.1.3.6.1.4.1.89.0.14,RADLAN-MIB::startTftp,,,,,,Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
.1.3.6.1.4.1.89.0.23,RADLAN-MIB::faultBackUp,,,,,,Automantic switchover to backup link because of main link fault.
.1.3.6.1.4.1.89.0.24,RADLAN-MIB::mainLinkUp,,,,,,Communication returened to main link.
.1.3.6.1.4.1.89.0.36,RADLAN-MIB::ipxRipTblOverflow,,,,,,This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
.1.3.6.1.4.1.89.0.37,RADLAN-MIB::ipxSapTblOverflow,,,,,,This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
.1.3.6.1.4.1.89.0.49,RADLAN-MIB::facsAccessVoilation,,,,,,This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface. The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
.1.3.6.1.4.1.89.0.50,RADLAN-MIB::autoConfigurationCompleted,,,,,,This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
.1.3.6.1.4.1.89.0.51,RADLAN-MIB::forwardingTabOverflow,,,,,,This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
.1.3.6.1.4.1.89.0.53,RADLAN-MIB::framRelaySwitchConnectionUp,,,,,,This trap indicates that a connection establish between the Frame relay Switch and the WanGate. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
.1.3.6.1.4.1.89.0.54,RADLAN-MIB::framRelaySwitchConnectionDown,,,,,,This trap indicates that a connection between the Frame Relay Switch and the WanGate failed. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
.1.3.6.1.4.1.89.0.61,RADLAN-MIB::errorsDuringInit,,,,,,This trap indicates that the an error occured during initialization The bound variable rndErrorDesc, rndErrorSeverity(== error )
.1.3.6.1.4.1.89.0.66,RADLAN-MIB::vlanDynPortAdded,,,,,,
.1.3.6.1.4.1.89.0.67,RADLAN-MIB::vlanDynPortRemoved,,,,,,
.1.3.6.1.4.1.89.0.68,RADLAN-MIB::rsSDclientsTableOverflow,,,,,,This warning is generated when an overflow occurs in the clients table.
.1.3.6.1.4.1.89.0.69,RADLAN-MIB::rsSDinactiveServer,,,,,,This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
.1.3.6.1.4.1.89.0.70,RADLAN-MIB::rsIpZhrConnectionsTableOverflow,,,,,,The Zero Hop Routing connections Table has been overflown.
.1.3.6.1.4.1.89.0.71,RADLAN-MIB::rsIpZhrReqStaticConnNotAccepted,,,,,,The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
.1.3.6.1.4.1.89.0.72,RADLAN-MIB::rsIpZhrVirtualIpAsSource,,,,,,The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
.1.3.6.1.4.1.89.0.73,RADLAN-MIB::rsIpZhrNotAllocVirtualIp,,,,,,The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
.1.3.6.1.4.1.89.0.74,RADLAN-MIB::rsSnmpSetRequestInSpecialCfgState,,,,,,An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
.1.3.6.1.4.1.89.0.136,RADLAN-MIB::rsPingCompletion,,,,,,A rsPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated. The trap severity is info. The trap text will specify the following information: rsPingCompletionStatus, rsPingSentPackets, rsPingReceivedPackets In addition to the above listed objects (which are always present), the message will also specify the following quantities: if any responses were received: rsPingMinReturnTime rsPingAvgReturnTime rsPingMaxReturnTime
.1.3.6.1.4.1.89.0.137,RADLAN-MIB::pppSecurityViolation,,,,,,This trap indicates that a PPP link got an unrecognized secret. The bound variables rndErrorDesc, rndErrorSeverity(== warning ), interface Number. and pppSecurityIdentity
.1.3.6.1.4.1.89.0.138,RADLAN-MIB::frDLCIStatudChange,,,,,,
.1.3.6.1.4.1.89.0.139,RADLAN-MIB::papFailedCommunication,,,,,,
.1.3.6.1.4.1.89.0.140,RADLAN-MIB::chapFailedCommunication,,,,,,
.1.3.6.1.4.1.89.0.141,RADLAN-MIB::rsWSDRedundancySwitch,,,,,,Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.
.1.3.6.1.4.1.89.0.142,RADLAN-MIB::rsDhcpAllocationFailure,,,,,,DHCP failed to allocate an IP address to a requesting host because of memory shortage or inadequate configuration of available IP addresses.
.1.3.6.1.4.1.89.0.143,RADLAN-rlIPMulticast-MIB::rlIgmpTableOverflow,,,,,,An IGMP Table overflow.
.1.3.6.1.4.1.89.0.144,RADLAN-rlIPMulticast-MIB::rlPimTableOverflow,,,,,,An IGMP Table overflow.
.1.3.6.1.4.1.89.0.145,RADLAN-MIB::rlIpFftStnOverflow,,,,,,The IP SFFT overflow.
.1.3.6.1.4.1.89.0.146,RADLAN-MIB::rlIpFftSubOverflow,,,,,,The IP NFFT overflow.
.1.3.6.1.4.1.89.0.147,RADLAN-MIB::rlIpxFftStnOverflow,,,,,,The IPX SFFT overflow.
.1.3.6.1.4.1.89.0.148,RADLAN-MIB::rlIpxFftSubOverflow,,,,,,The IPX NFFT overflow.
.1.3.6.1.4.1.89.0.149,RADLAN-MIB::rlIpmFftOverflow,,,,,,The IPM FFT overflow.
.1.3.6.1.4.1.89.0.150,RADLAN-MIB::rlPhysicalDescriptionChanged,,,,,,Indicates that the physical decription of the device has changed
.1.3.6.1.4.1.89.0.151,RADLAN-MIB::rldot1dStpPortStateForwarding,,,,,,The trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state.
.1.3.6.1.4.1.89.0.152,RADLAN-MIB::rldot1dStpPortStateNotForwarding,,,,,,The trap is sent by a bridge when any of its configured ports transitions from the Forwarding state to the Blocking state.
.1.3.6.1.4.1.89.0.153,RADLAN-MIB::rlPolicyDropPacketTrap,,,,,,Indicates that the packet drop due to the policy 
.1.3.6.1.4.1.89.0.154,RADLAN-MIB::rlPolicyForwardPacketTrap,,,,,,Indicates that the packet has forward based on policy
.1.3.6.1.4.1.89.0.156,RADLAN-MIB::rlIgmpProxyTableOverflow,,,,,,An IGMP PROXY Table overflow.
.1.3.6.1.4.1.89.0.157,RADLAN-MIB::rlIgmpV1MsgReceived,,,,,,An IGMP Message of v1 received on ifIndex. 
.1.3.6.1.4.1.89.0.158,RADLAN-MIB::rlVrrpEntriesDeleted,,,,,,One or more VRRP entries deleted due to IP interface deletion or transition. 
.1.3.6.1.4.1.89.0.159,RADLAN-MIB::rlHotSwapTrap,,,,,,Hot swap trap.
.1.3.6.1.4.1.89.0.160,RADLAN-MIB::rlTrunkPortAddedTrap,,,,,,Informational trap indicating that a port is added to a trunk
.1.3.6.1.4.1.89.0.161,RADLAN-MIB::rlTrunkPortRemovedTrap,,,,,,This warning is generated when a port removed from a trunk.
.1.3.6.1.4.1.89.0.162,RADLAN-MIB::rlTrunkPortNotCapableTrap,,,,,,Informational trap indicating that a port can not be added to a trunk because of device limitations or diffrent swIfType.
.1.3.6.1.4.1.89.0.163,RADLAN-rlIPMulticast-MIB::rlPimSmInterfaceTableOverflow,,,,,,The PIM interface table Table overflows.
.1.3.6.1.4.1.89.0.164,RADLAN-rlIPMulticast-MIB::rlPimSmNextHopTableOverflow,,,,,,The PIM SM Next Hop Table overflows.
.1.3.6.1.4.1.89.0.165,RADLAN-rlIPMulticast-MIB::rlPimSmMulticastRouteTableOverflow,,,,,,The PIM SM Multicast Route Table overflows.
.1.3.6.1.4.1.89.0.166,RADLAN-rlIPMulticast-MIB::rlPimSmTableOverflow,,,,,,The PIM SM Table(Not include the Interface, Next Hop, Multicast Route Tables) overflows.
.1.3.6.1.4.1.89.0.167,RADLAN-rlIPMulticast-MIB::rlPimSmSrcUnreacable,,,,,,An RPF source unreacable.
.1.3.6.1.4.1.89.0.168,RADLAN-rlIPMulticast-MIB::rlPimSmParallelPathToLAN,,,,,,Two Pim ifIndexes connect to the same LAN
.1.3.6.1.4.1.89.0.169,RADLAN-rlIPMulticast-MIB::rlPimSmNotSMUpstreamNeighbor,,,,,,An RPF Upstream Neighbor is not support the PIM SM.
.1.3.6.1.4.1.89.0.170,RADLAN-MIB::rlLockPortTrap,,,,,,Informational trap indicating that a locked port receive a frame with new source Mac Address.
.1.3.6.1.4.1.89.0.171,RADLAN-MIB::vlanDynVlanAdded,,,,,,add gvrp dynamic vlan
.1.3.6.1.4.1.89.0.172,RADLAN-MIB::vlanDynVlanRemoved,,,,,,remove gvrp dynamic vlan
.1.3.6.1.4.1.89.0.173,RADLAN-MIB::vlanDynamicToStatic,,,,,,vlan status was changed from dynamic to static
.1.3.6.1.4.1.89.0.174,RADLAN-MIB::vlanStaticToDynamic,,,,,,vlan status was changed from static to dynamic
.1.3.6.1.4.1.89.0.175,RADLAN-MIB::dstrSysLog,,,,,,Master receive trap from slave , and forward it as trap
.1.3.6.1.4.1.89.0.176,RADLAN-MIB::rlEnvMonFanStateChange,,,,,,Trap indicating the fan state. rndErrorSeverity will be: 0 for fan state nomal, notPresent 1 for fan state warning, notFunctioning 2 for fan state critical 3 for fan state fatal The error text will specify the fan index, fan description and the exact fan state
.1.3.6.1.4.1.89.0.177,RADLAN-MIB::rlEnvMonPowerSupplyStateChange,,,,,,Trap indicating the power supply state. rndErrorSeverity will be: 0 for power supply state nomal, notPresent 1 for power supply state warning, notFunctioning 2 for power supply state critical 3 for power supply state fatal The error text will specify the power supply index, power supply description and the exact power supply state
.1.3.6.1.4.1.89.0.178,RADLAN-MIB::rlStackStateChange,,,,,,Trap indicating the stack connection state 0 for stack state connected, 1 for stack state disconnected 
.1.3.6.1.4.1.89.0.179,RADLAN-MIB::rlEnvMonTemperatureRisingAlarm,,,,,,Trap indicating that the temperature in the device has exceeded the device specific safe temperature threshold.
.1.3.6.1.4.1.89.0.180,RADLAN-MIB::rlCopyFinished,,,,,,Informational trap indicating that the device has finished a copy operation successfully.
.1.3.6.1.4.1.89.0.181,RADLAN-MIB::rlCopyFailed,,,,,,Informational trap indicating that the copy operation has failed.
.1.3.6.1.4.1.89.0.182,RADLAN-rlIPMulticast-MIB::rlIpmAddOutgoingInterfaceFailed,,,,,,Adding an Ipm outgoing interface has failed.
.1.3.6.1.4.1.89.0.183,RADLAN-MIB::rlBrgMacAddFailedTrap,,,,,,Informational trap indicating that adding dynamic mac/s failed due to full hash chain.
.1.3.6.1.4.1.89.0.184,RADLAN-MIB::rldot1xPortStatusAuthorizedTrap,,,,,,Informational trap indicating that port 802.1x status is authorized.
.1.3.6.1.4.1.89.0.185,RADLAN-MIB::rldot1xPortStatusUnauthorizedTrap,,,,,,Warning trap is indicating that port 802.1x status is unAuthorized.
.1.3.6.1.4.1.89.0.186,RADLAN-Physicaldescription-MIB::rlStackUnitRemoved,,,,,,Trap indicating that a unit was removed from the stack.
.1.3.6.1.4.1.89.0.187,RADLAN-Physicaldescription-MIB::rlStackConfigChangedRingChain,,,,,,Trap indicating that the configuration of the stack has changed. - from ring to chain - from chain to ring.
.1.3.6.1.4.1.89.0.188,RADLAN-Physicaldescription-MIB::rlStackBackupUnitRemoved,,,,,,Trap indicating that the backup unit was removed from the stack.
.1.3.6.1.4.1.89.0.189,RADLAN-Physicaldescription-MIB::rlStackMasterSwitchover,,,,,,Trap indicating that a new master was elected. The old maste is the backup now. 
.1.3.6.1.4.1.89.0.190,RADLAN-Physicaldescription-MIB::rlStackUnitDifferentSwVersion,,,,,,Trap indicating that the new unit added to the stack has different software version than the master.
.1.3.6.1.4.1.89.0.191,RADLAN-Physicaldescription-MIB::rlStackDuplicateUnitNotJoin,,,,,,Trap indicating that a new unit with duplicated unit id was added to the stack - but it will not join the stack.
.1.3.6.1.4.1.89.0.192,RADLAN-MIB::swIfTablePortLock,,,,,,Warning trap is indicating port lock hase began.
.1.3.6.1.4.1.89.0.193,RADLAN-MIB::swIfTablePortUnLock,,,,,,Warning trap is indicating port lock has ended.
.1.3.6.1.4.1.89.0.194,RADLAN-MIB::rlAAAUserLocked,,,,,,Warning trap indicating that the user was locked after number of consecutives unsuccessful login attempts.
.1.3.6.1.4.1.89.1,RADLAN-MIB::rndMng,,,,,,
.1.3.6.1.4.1.89.1.1,RADLAN-rndMng::rndSysId,INTEGER,read-only,,current,,Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.
.1.3.6.1.4.1.89.1.2,RADLAN-rndMng::rndAction,INTEGER,read-write,,current,reset(1):sendNetworkTab(2):deleteNetworkTab(3):sendRoutingTab(4):deleteRoutingTab(5):sendLanTab(6):deleteLanTab(7):deleteArpTab(8):sendArpTab(9):deleteRouteTab(10):sendRouteTab(11):backupSPFRoutingTab(12):backupIPRoutingTab(13):backupNetworkTab(14):backupLanTab(15):backupArpTab(16):backupIPXRipTab(17):backupIPXSAPTab(18):resetStartupCDB(19):eraseStartupCDB(20):deleteZeroHopRoutingAllocTab(21):slipDisconnect(22):deleteDynamicLanTab(23):eraseRunningCDB(24):copyStartupToRunning(25),This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol.
.1.3.6.1.4.1.89.1.3,RADLAN-rndMng::rndFileName,OCTET,read-write,,current,,The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
.1.3.6.1.4.1.89.1.4,RADLAN-rndMng::rlSnmpVersionSupported,OCTET,read-only,,current,,Indicates the snmp versions that are supported by this device.
.1.3.6.1.4.1.89.1.5,RADLAN-rndMng::rlSnmpMibVersion,INTEGER,read-only,,current,,Indicates the snmp support version that is supported by this device.
.1.3.6.1.4.1.89.2,RADLAN-MIB::rndDeviceParams,,,,,,
.1.3.6.1.4.1.89.2.1,RADLAN-MIB::rndBridgeType,INTEGER,read-only,,mandatory,reb(1):ceb(2):ceblb(3):xeb(4):xeb1(5):rebsx(6):rtb(7):ltb(8):tre(9):rtre(10):xtb(11):ete(12):rete(13):ielb(30):leb(31):openGate12(32):openGate4(33):ran(34):itlb(35):gatelinx(36):openGate2(37):ogRanTR(38):rdapter(39):ogVan(40):wanGate(41):ogRubE(42):ogRubT(43):wanGateI(44):vGate4(45):lre(46):mrt(47):vGate2(48),Identification of the RND bridge type.
.1.3.6.1.4.1.89.2.2,RADLAN-MIB::rndInactiveArpTimeOut,INTEGER,read-write,,mandatory,,This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
.1.3.6.1.4.1.89.2.3,RADLAN-MIB::rndBridgeAlarm,,,,,,
.1.3.6.1.4.1.89.2.3.1,RADLAN-MIB::rndErrorDesc,OCTET,read-only,,mandatory,,A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
.1.3.6.1.4.1.89.2.3.2,RADLAN-MIB::rndErrorSeverity,INTEGER,read-only,,mandatory,info(0):warning(1):error(2):fatal-error(3),The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
.1.3.6.1.4.1.89.2.4,RADLAN-MIB::rndBrgVersion,OCTET,read-only,,mandatory,,The bridge version.
.1.3.6.1.4.1.89.2.5,RADLAN-MIB::rndBrgFeatures,OCTET,read-only,,mandatory,,A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation bit1: DEC Router bit2: IPX Router bit3: IP Router bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan bit7: PPP-Security bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server bit7: Check Connectivity bit8: WSD multiplexing bit1: MRT3 bit2: WSD Redundancy bit3: DHCP Server bit4: WSD Connection Limit bit5: WSD Distributed System bit6: WSD Load Report bit7: WSD super farm bit8: RadWiz leased line bit1: PPP IP address negotiaton bit2: DNS bit3: Nat bit4: WSD Static proximity bit5: WSD Dynamic proximity bit6: WSD Proxy bit7: WSD Proximity client bit8: MAC Load balancing bit1: Unnum Inf bit2: Power Supply redundancy bit3: MRT PPP Compression bit4: ZHR Apolo bit5: Copy port bit6: UDP Relay 2.0 bit7: NVRAM bit8: URL table bit1: URL super farm bit2: NAT on LAN bit3: Remote Con bit4: AP5000 bit5: Session tracking bit6: Mirroring bit7: Alias IP bit8: CSD Nat bit1: content check bit2: mlb virtual ip bit3: reserved RadLan bit4: csd nat exception bit5: statistics monitor bit6: reserved-for-radware 
.1.3.6.1.4.1.89.2.6,RADLAN-MIB::rndBrgLicense,OCTET,read-write,,mandatory,,This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
.1.3.6.1.4.1.89.2.7,RADLAN-MIB::rndIpHost,,,,,,
.1.3.6.1.4.1.89.2.7.2,RADLAN-MIB::rndCommunityTable,,not-accessible,,mandatory,,The community table of the agent
.1.3.6.1.4.1.89.2.7.2.1,RADLAN-MIB::rndCommunityEntry,,not-accessible,rndCommunityMngStationAddr:IMPLIEDrndCommunityString,mandatory,, The row definition for this table.
.1.3.6.1.4.1.89.2.7.2.1.1,RADLAN-MIB::rndCommunityMngStationAddr,IpAddress,read-write,,mandatory,,The management station that will be allowed to communicate with the agent IP address
.1.3.6.1.4.1.89.2.7.2.1.2,RADLAN-MIB::rndCommunityString,OCTET,read-write,,mandatory,,The community string with which the management station will communicate with the agent
.1.3.6.1.4.1.89.2.7.2.1.3,RADLAN-MIB::rndCommunityAccess,INTEGER,read-write,,mandatory,readOnly(1):readWrite(2):super(3),The allowed access to this management station
.1.3.6.1.4.1.89.2.7.2.1.4,RADLAN-MIB::rndCommunityTrapsEnable,INTEGER,read-write,,mandatory,snmpV1(1):snmpV2(2):snmpV3(3):trapsDisable(4),Should the agent send traps to the management station, and what version is required
.1.3.6.1.4.1.89.2.7.2.1.5,RADLAN-MIB::rndCommunityStatus,INTEGER,read-write,,mandatory,enable(1):invalid(2),The status of this entry. If the status is invalid the community entry will be deleted
.1.3.6.1.4.1.89.2.7.2.1.6,RADLAN-MIB::rndCommunityPortSecurity,INTEGER,read-write,,mandatory,enabled(1):disabled(2),If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device.
.1.3.6.1.4.1.89.2.7.2.1.7,RADLAN-MIB::rndCommunityOwner,OCTET,read-write,,mandatory,,The owner of this community
.1.3.6.1.4.1.89.2.7.2.1.8,RADLAN-MIB::rndCommunityTrapDestPort,INTEGER,read-write,,mandatory,,The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA assigned port number for SNMP traps. This object is relevant only if rndCommunityTrapsEnable has a value different from trapsDisable.
.1.3.6.1.4.1.89.2.7.3,RADLAN-MIB::rlMridTable,,not-accessible,,mandatory,,The MRID related configurations table of the agent
.1.3.6.1.4.1.89.2.7.3.1,RADLAN-MIB::rlMridEntry,,not-accessible,rndCommunityMngStationAddr:IMPLIEDrndCommunityString,mandatory,, The row definition for this table.
.1.3.6.1.4.1.89.2.7.3.1.1,RADLAN-MIB::rlMridConnection,INTEGER,read-write,,mandatory,,The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry.
.1.3.6.1.4.1.89.2.7.3.1.2,RADLAN-MIB::rlManagedMrid,INTEGER,read-write,,mandatory,,The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry 
.1.3.6.1.4.1.89.2.7.4,RADLAN-MIB::rndIpHostManagement,,,,,,
.1.3.6.1.4.1.89.2.7.4.1,RADLAN-MIB::rndIpHostManagementSupported,INTEGER,read-only,,mandatory,true(1):false(2),ifindex manage supported.
.1.3.6.1.4.1.89.2.7.4.2,RADLAN-MIB::rndIpHostManagementIfIndex,INTEGER,read-write,,mandatory,,if supported manage , indicate ifindex, if 0 thaen disable
.1.3.6.1.4.1.89.2.8,RADLAN-MIB::rndManagedTime,OCTET,read-write,,mandatory,,The time will be sent in the format hhmmss
.1.3.6.1.4.1.89.2.9,RADLAN-MIB::rndManagedDate,OCTET,read-write,,mandatory,,The date will be sent in the format ddmmyy
.1.3.6.1.4.1.89.2.10,RADLAN-MIB::rndBaseBootVersion,OCTET,read-only,,mandatory,,Defines the boot version of the product.
.1.3.6.1.4.1.89.2.11,RADLAN-MIB::genGroup,,,,,,
.1.3.6.1.4.1.89.2.11.1,RADLAN-MIB::genGroupHWVersion,OCTET,read-only,,mandatory,,Defines the HW version of the product.
.1.3.6.1.4.1.89.2.11.2,RADLAN-MIB::genGroupConfigurationSymbol,OCTET,read-only,,mandatory,,Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
.1.3.6.1.4.1.89.2.11.3,RADLAN-MIB::genGroupHWStatus,INTEGER,read-only,,mandatory,ok(1):hardwareProblems(2):notSupported(255),This attribute describes the status of the group hardware as detected by the sensors software.
.1.3.6.1.4.1.89.2.12,RADLAN-MIB::rndBasePhysicalAddress,OCTET,read-only,,mandatory,,The Base physical (MAC) address of the device.
.1.3.6.1.4.1.89.2.13,RADLAN-MIB::rndSoftwareFile,,,,,,
.1.3.6.1.4.1.89.2.13.1,RADLAN-MIB::rndActiveSoftwareFileTable,,not-accessible,,mandatory,, The (conceptual) table listing the active software file of the requested unit.
.1.3.6.1.4.1.89.2.13.1.1,RADLAN-MIB::rndActiveSoftwareFileEntry,,not-accessible,rndUnitNumber,mandatory,, An entry (conceptual row) in the rndActiveSoftwareFileTable.
.1.3.6.1.4.1.89.2.13.1.1.1,RADLAN-MIB::rndUnitNumber,INTEGER,read-write,,mandatory,,The unit number (for stackable devices) or 1 for 'stand alone' device.
.1.3.6.1.4.1.89.2.13.1.1.2,RADLAN-MIB::rndActiveSoftwareFile,INTEGER,read-only,,mandatory,image1(1):image2(2),Indicates the current active software file, image1 or image2.
.1.3.6.1.4.1.89.2.13.1.1.3,RADLAN-MIB::rndActiveSoftwareFileAfterReset,INTEGER,read-write,,mandatory,image1(1):image2(2):invalidImage(3),Indicates the software file that will be active after reset (image1 or image2). If an error occurred in the download process, resulting in the corruption of the single software file, The value 'invalidImage' will be returned. This value can not be set by the user.
.1.3.6.1.4.1.89.24,RADLAN-MIB::rndBootP,,,,,,
.1.3.6.1.4.1.89.24.1,RADLAN-MIB::rndBootPServerAddress,IpAddress,read-write,,mandatory,, The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
.1.3.6.1.4.1.89.24.2,RADLAN-MIB::rndBootPRelaySecThreshold,INTEGER,read-write,,mandatory,,BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
.1.3.6.1.4.1.89.26,RADLAN-MIB::ipSpec,,,,,,
.1.3.6.1.4.1.89.26.1,RADLAN-IP::rsIpAddrTable,,not-accessible,,current,,This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
.1.3.6.1.4.1.89.26.1.1,RADLAN-IP::rsIpAddrEntry,,not-accessible,rsIpAdEntAddr,current,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.4.1.89.26.1.1.1,RADLAN-IP::rsIpAdEntAddr,IpAddress,read-only,,current,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.4.1.89.26.1.1.2,RADLAN-IP::rsIpAdEntIfIndex,INTEGER,read-write,,current,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.4.1.89.26.1.1.3,RADLAN-IP::rsIpAdEntNetMask,IpAddress,read-write,,current,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.4.1.89.26.1.1.4,RADLAN-IP::rsIpAdEntForwardIpBroadcast,INTEGER,read-write,,current,enable(1):disable(2), This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). 
.1.3.6.1.4.1.89.26.1.1.5,RADLAN-IP::rsIpAdEntBackupAddr,IpAddress,read-write,,current,,In case there are two IP routers in the domain, the address of the second IP router.
.1.3.6.1.4.1.89.26.1.1.6,RADLAN-IP::rsIpAdEntStatus,INTEGER,read-write,,current,valid(1):invalid(2), The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II).
.1.3.6.1.4.1.89.26.1.1.7,RADLAN-IP::rsIpAdEntBcastAddr,INTEGER,read-write,,current,, Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.
.1.3.6.1.4.1.89.26.1.1.8,RADLAN-IP::rsIpAdEntArpServer,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether the router will reply to incoming ARP requests on this interface, providing the physical address corresponding to this IP interface.
.1.3.6.1.4.1.89.26.1.1.9,RADLAN-IP::rsIpAdEntName,OCTET,read-write,,current,,The IP Interface name
.1.3.6.1.4.1.89.26.1.1.10,RADLAN-IP::rsIpAdEntOwner,INTEGER,read-write,,current,static(1):dhcp(2):internal(3),The IP Interface owner. Static if interface defined by user, dhcp if received by boot protocol like DHCP and internal for internal usage.
.1.3.6.1.4.1.89.26.1.1.11,RADLAN-IP::rsIpAdEntAdminStatus,INTEGER,read-write,,current,up(1):down(2),The IP Interface admin status.
.1.3.6.1.4.1.89.26.1.1.12,RADLAN-IP::rsIpAdEntOperStatus,INTEGER,read-only,,current,active(1):inactive(2),If active the interface can be used to send and receive frames.
.1.3.6.1.4.1.89.26.2,RADLAN-IP::icmpSpec,,,,,,
.1.3.6.1.4.1.89.26.2.1,RADLAN-IP::rsIcmpGenErrMsgEnable,INTEGER,read-write,,current,enable(1):disable(2),This variable controlls the ability to generate ICMP error messages
.1.3.6.1.4.1.89.26.2.2,RADLAN-IP::rsIcmpRdTable,,not-accessible,,current,,This table contains ICMP Router Discovery parameters configurated per IP interface.
.1.3.6.1.4.1.89.26.2.2.1,RADLAN-IP::rsIcmpRdEntry,,not-accessible,rsIcmpRdIpAddr,current,,The ICMP parameters configurated for IP interface.
.1.3.6.1.4.1.89.26.2.2.1.1,RADLAN-IP::rsIcmpRdIpAddr,IpAddress,read-only,,current,,The IP address to which this entry's information pertains.
.1.3.6.1.4.1.89.26.2.2.1.2,RADLAN-IP::rsIcmpRdIpAdvertAddr,IpAddress,read-write,,current,, The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255.
.1.3.6.1.4.1.89.26.2.2.1.3,RADLAN-IP::rsIcmpRdMaxAdvertInterval,INTEGER,read-write,,current,,The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.
.1.3.6.1.4.1.89.26.2.2.1.4,RADLAN-IP::rsIcmpRdMinAdvertInterval,INTEGER,read-write,,current,,The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpRdMaxAdvertInterval.
.1.3.6.1.4.1.89.26.2.2.1.5,RADLAN-IP::rsIcmpRdAdvertLifetime,INTEGER,read-write,,current,,The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.
.1.3.6.1.4.1.89.26.2.2.1.6,RADLAN-IP::rsIcmpRdAdvertise,INTEGER,read-write,,current,enable(1):disable(2),A flag indicating whether or not the address is to be advertised.
.1.3.6.1.4.1.89.26.2.2.1.7,RADLAN-IP::rsIcmpRdPreferenceLevel,INTEGER,read-write,,current,,The preferability of the address as a default router address, relative to other router addresses on the same subnet.
.1.3.6.1.4.1.89.26.2.2.1.8,RADLAN-IP::rsIcmpRdEntStatus,INTEGER,read-write,,current,,Setting of any value to this object set values of all fields to the default values.
.1.3.6.1.4.1.89.26.3,RADLAN-IP::rip2Spec,,,,,,
.1.3.6.1.4.1.89.26.3.1,RADLAN-IpRouter::rsRip2IfConfTable,,not-accessible,,current,,This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)
.1.3.6.1.4.1.89.26.3.1.1,RADLAN-IpRouter::rsRip2IfConfEntry,,not-accessible,rsRip2IfConfAddress,current,,The row definition for this table.
.1.3.6.1.4.1.89.26.3.1.1.1,RADLAN-IpRouter::rsRip2IfConfAddress,IpAddress,read-only,,current,, The IP Address of this system on the indicated subnet. 
.1.3.6.1.4.1.89.26.3.1.1.2,RADLAN-IpRouter::rsRip2IfConfVirtualDis,INTEGER,read-write,,current,,This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
.1.3.6.1.4.1.89.26.3.1.1.3,RADLAN-IpRouter::rsRip2IfConfAutoSend,INTEGER,read-write,,current,enable(1):disable(2),This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration. 
.1.3.6.1.4.1.89.26.3.1.1.4,RADLAN-IpRouter::rlRip2IfConfKeyChain,OCTET,read-write,,current,,Name of the key-chain which rip2 interface uses for md5 authentication
.1.3.6.1.4.1.89.26.3.2,RADLAN-IpRouter::rlRip2AutoInterfaceCreation,INTEGER,read-only,,current,enable(1):disable(2),This variable controls RIP automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of rip Interface. If value is disable Rip interface is created but not activated. The option is a platform parameter.
.1.3.6.1.4.1.89.26.3.3,RADLAN-IpRouter::rlRip2MibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.26.4,RADLAN-IP::arpSpec,,,,,,
.1.3.6.1.4.1.89.26.4.1,RADLAN-IP::rsArpDeleteTable,INTEGER,read-write,,current,noAction(0):deleteArpTab(1):deleteIpArpDynamicEntries(2):deleteIpArpStaticEntries(3):deleteIpArpDelDynamicRefreshStatic(4),Setting to value deleteArpTab(1): deletes the arp table - static and dynamic entries deleteIpArpDynamicEntries(2): delete all dynamic entries deleteIpArpStaticEntries(3): delete all static entries deleteIpArpDelDynamicRefreshStatic(4) - delete all dynamic - refresh static, thus refrashing FFT. on get returns the last action
.1.3.6.1.4.1.89.26.4.2,RADLAN-IP::rsArpInactiveTimeOut,Unsigned32,read-write,,current,,This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
.1.3.6.1.4.1.89.26.4.3,RADLAN-IP::rsArpProxy,INTEGER,read-write,,current,enable(1):disable(2),When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
.1.3.6.1.4.1.89.26.4.4,RADLAN-IP::rsArpRequestsSent,Counter32,read-only,,current,,Displays how many ARP requests have been sent out to an ARP server for address resolution.
.1.3.6.1.4.1.89.26.4.5,RADLAN-IP::rsArpRepliesSent,Counter32,read-only,,current,,Displays how many ARP replies have been sent out to an ARP client in response to request packets.
.1.3.6.1.4.1.89.26.4.6,RADLAN-IP::rsArpProxyRepliesSent,Counter32,read-only,,current,,Displays how many proxy ARP replies have been sent out in response to request packets. A proxy router serving as a gateway to a subnet would respond with a proxy reply.
.1.3.6.1.4.1.89.26.4.7,RADLAN-IP::rsArpUnresolveTimer,INTEGER,read-write,,current,,Specifies the frequency in seconds in which to send out ARP requests to resolve the Next Hop MAC address.
.1.3.6.1.4.1.89.26.4.8,RADLAN-IP::rsArpMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 2. Version 1: rsArpDeleteTable Setting this object to any not-null value has the effect of deleting all entries of the ARP table. Version 2: rsArpDeleteTable Setting to value deleteArpTab(1): deletes the arp table - static and dynamic entries deleteIpArpDynamicEntries(2): delete all dynamic entries deleteIpArpStaticEntries(3): delete all static entries deleteIpArpDelDynamicRefreshStatic(4): delete all dynamic - refresh static, thus refrashing FFT. on get returns the last action. New MIB variables support: rsArpRequestsSent rsArpRepliesSent rsArpProxyRepliesSent rsArpUnresolveTimer rsArpMibVersion
.1.3.6.1.4.1.89.26.5,RADLAN-IP::tftp,,,,,,
.1.3.6.1.4.1.89.26.5.1,RADLAN-IP::rsTftpRetryTimeOut,INTEGER,read-write,,current,, General Retransmission time-out value (seconds) 
.1.3.6.1.4.1.89.26.5.2,RADLAN-IP::rsTftpTotalTimeOut,INTEGER,read-write,,current,, Total Retransmission time-out value (seconds) 
.1.3.6.1.4.1.89.26.5.3,RADLAN-IP::rsSendConfigFile,OCTET,read-write,,current,,The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address.
.1.3.6.1.4.1.89.26.5.4,RADLAN-IP::rsGetConfigFile,OCTET,read-write,,current,,The file name include path where the Router Server will get the full configuration from. The default destination address will be the sender address.
.1.3.6.1.4.1.89.26.5.5,RADLAN-IP::rsLoadSoftware,OCTET,read-write,,current,,The file name include path where the Router Server will get the software. The default source address will be the sender address.
.1.3.6.1.4.1.89.26.5.6,RADLAN-IP::rsFileServerAddress,IpAddress,read-write,,current,,The IP address of the configuration / sw server.
.1.3.6.1.4.1.89.26.5.7,RADLAN-IP::rsSoftwareDeviceName,OCTET,read-write,,current,,The Software Device Name specifies a device name, using this Software
.1.3.6.1.4.1.89.26.5.8,RADLAN-IP::rsSoftwareFileAction,INTEGER,read-write,,current,download(1):upload(2),Holds the current action done on the software file 
.1.3.6.1.4.1.89.26.6,RADLAN-IP::ipRedundancy,,,,,,
.1.3.6.1.4.1.89.26.6.1,RADLAN-IpRouter::ipRedundAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This parameter controls the IP Redundancy in the device. In case the parameter is Enable and the other router becomes inoperational, all the traffic is handled by this element.
.1.3.6.1.4.1.89.26.6.2,RADLAN-IpRouter::ipRedundOperStatus,INTEGER,read-only,,current,active(1):inactive(2), obsolete 
.1.3.6.1.4.1.89.26.6.3,RADLAN-IpRouter::ipRedundRoutersTable,,not-accessible,,current,,List of IP addresses backed up by this router.
.1.3.6.1.4.1.89.26.6.3.1,RADLAN-IpRouter::ipRedundRoutersEntry,,not-accessible,ipRedundRoutersIfAddr:ipRedundRoutersMainRouterAddr,current,, The row definition for this table.
.1.3.6.1.4.1.89.26.6.3.1.1,RADLAN-IpRouter::ipRedundRoutersIfAddr,IpAddress,read-only,,current,,The Ip address of the IP interface on which the redundancy feature is operational.
.1.3.6.1.4.1.89.26.6.3.1.2,RADLAN-IpRouter::ipRedundRoutersMainRouterAddr,IpAddress,read-only,,current,,The Ip address of the polled main router.
.1.3.6.1.4.1.89.26.6.3.1.3,RADLAN-IpRouter::ipRedundRoutersOperStatus,INTEGER,read-only,,current,active(1):inactive(2),If active, the main router is considered inoperational and the IP interface operates as its backup.
.1.3.6.1.4.1.89.26.6.3.1.4,RADLAN-IpRouter::ipRedundRoutersPollInterval,INTEGER,read-write,,current,,Polling interval for this router (in seconds). If 0 the router is not polled.
.1.3.6.1.4.1.89.26.6.3.1.5,RADLAN-IpRouter::ipRedundRoutersTimeout,INTEGER,read-write,,current,,Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
.1.3.6.1.4.1.89.26.6.3.1.6,RADLAN-IpRouter::ipRedundRoutersStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Entry status
.1.3.6.1.4.1.89.26.7,RADLAN-IP::ipRouteLeaking,,,,,,
.1.3.6.1.4.1.89.26.7.1,RADLAN-IpRouter::ipLeakStaticToRip,INTEGER,read-write,,current,enable(1):disable(2),This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
.1.3.6.1.4.1.89.26.7.2,RADLAN-IpRouter::ipLeakStaticToOspf,INTEGER,read-write,,current,enable(1):disable(2),This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes.
.1.3.6.1.4.1.89.26.7.3,RADLAN-IpRouter::ipLeakOspfToRip,INTEGER,read-write,,current,enable(1):disable(2),This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP.
.1.3.6.1.4.1.89.26.7.4,RADLAN-IpRouter::ipLeakRipToOspf,INTEGER,read-write,,current,enable(1):disable(2),This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes.
.1.3.6.1.4.1.89.26.7.5,RADLAN-IpRouter::ipLeakExtDirectToOspf,INTEGER,read-write,,current,enable(1):disable(2),This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes.
.1.3.6.1.4.1.89.26.8,RADLAN-IP::ipRipFilter,,,,,,
.1.3.6.1.4.1.89.26.8.1,RADLAN-IpRouter::rsIpRipFilterGlbTable,,not-accessible,,current,,The table of RIP global filters per IP router.
.1.3.6.1.4.1.89.26.8.1.1,RADLAN-IpRouter::rsIpRipFilterGlbEntry,,not-accessible,rsIpRipFilterGlbType:rsIpRipFilterGlbNumber,current,, An entry in the RIP global filter table 
.1.3.6.1.4.1.89.26.8.1.1.1,RADLAN-IpRouter::rsIpRipFilterGlbType,INTEGER,read-only,,current,input(1):output(2), Type of filter - input/output 
.1.3.6.1.4.1.89.26.8.1.1.2,RADLAN-IpRouter::rsIpRipFilterGlbNumber,INTEGER,read-only,,current,, Number of RIP filter. 
.1.3.6.1.4.1.89.26.8.1.1.3,RADLAN-IpRouter::rsIpRipFilterGlbStatus,INTEGER,read-write,,current,valid(1):invalid(2):underCreation(3), The validity of this entry. Setting this value to invalid deletes
.1.3.6.1.4.1.89.26.8.1.1.4,RADLAN-IpRouter::rsIpRipFilterGlbIpAddr,IpAddress,read-write,,current,, network prefix IP address, as in the forwarding table. 
.1.3.6.1.4.1.89.26.8.1.1.5,RADLAN-IpRouter::rsIpRipFilterGlbNetworkMaskBits,INTEGER,read-write,,current,, the number of bits in the IP Network mask, called network-prefix-length
.1.3.6.1.4.1.89.26.8.1.1.6,RADLAN-IpRouter::rsIpRipFilterGlbMatchBits,INTEGER,read-write,,current,, the number of bits to match in the Network IP address. A value
.1.3.6.1.4.1.89.26.8.1.1.7,RADLAN-IpRouter::rsIpRipFilterGlbAction,INTEGER,read-write,,current,deny(1):permit(2), Filter action - permit/deny for this network
.1.3.6.1.4.1.89.26.8.2,RADLAN-IpRouter::rsIpRipFilterLclTable,,not-accessible,,current,,Table of input/output RIP filters used per IP Interface.
.1.3.6.1.4.1.89.26.8.2.1,RADLAN-IpRouter::rsIpRipFilterLclEntry,,not-accessible,rsIpRipFilterLclIpIntf:rsIpRipFilterLclType:rsIpRipFilterLclNumber,current,, An entry in the Intf RIP filter table
.1.3.6.1.4.1.89.26.8.2.1.1,RADLAN-IpRouter::rsIpRipFilterLclIpIntf,IpAddress,read-only,,current,, The IP address identifying the RIP interface for this filter.
.1.3.6.1.4.1.89.26.8.2.1.2,RADLAN-IpRouter::rsIpRipFilterLclType,INTEGER,read-only,,current,input(1):output(2), Type of filter - input/output 
.1.3.6.1.4.1.89.26.8.2.1.3,RADLAN-IpRouter::rsIpRipFilterLclNumber,INTEGER,read-only,,current,, Number of RIP filter for this Interface
.1.3.6.1.4.1.89.26.8.2.1.4,RADLAN-IpRouter::rsIpRipFilterLclStatus,INTEGER,read-write,,current,valid(1):invalid(2):underCreation(3), The validity of this entry. Setting this value to invalid deletes
.1.3.6.1.4.1.89.26.8.2.1.5,RADLAN-IpRouter::rsIpRipFilterLclIpAddr,IpAddress,read-write,,current,, network prefix IP address, as in the forwarding table. 
.1.3.6.1.4.1.89.26.8.2.1.6,RADLAN-IpRouter::rsIpRipFilterLclNetworkMaskBits,INTEGER,read-write,,current,, the number of bits in the IP Network mask, called network-prefix-length
.1.3.6.1.4.1.89.26.8.2.1.7,RADLAN-IpRouter::rsIpRipFilterLclMatchBits,INTEGER,read-write,,current,, the number of bits to match in the Network IP address. A value
.1.3.6.1.4.1.89.26.8.2.1.8,RADLAN-IpRouter::rsIpRipFilterLclAction,INTEGER,read-write,,current,deny(1):permit(2), Filter action - permit/deny 
.1.3.6.1.4.1.89.26.9,RADLAN-IP::rsRipEnable,INTEGER,read-write,,current,enable(1):disable(2),Enables or disables RIP.
.1.3.6.1.4.1.89.26.11,RADLAN-IP::rsTelnetPassword,OCTET,read-write,,current,,
.1.3.6.1.4.1.89.26.12,RADLAN-IP::rlTranslationNameToIpTable,,not-accessible,,current,,This table translates IP interfaces's name to IP interface's address
.1.3.6.1.4.1.89.26.12.1,RADLAN-IP::rlTranslationNameToIpEntry,,not-accessible,IMPLIEDrlTranslationNameToIpName,current,,The row definition for this table.
.1.3.6.1.4.1.89.26.12.1.1,RADLAN-IP::rlTranslationNameToIpName,OCTET,read-only,,current,,The IP Interface name
.1.3.6.1.4.1.89.26.12.1.2,RADLAN-IP::rlTranslationNameToIpIpAddr,IpAddress,read-only,,current,,The IP Interface address
.1.3.6.1.4.1.89.26.13,RADLAN-IP::rlIpRoutingProtPreference,,,,,,
.1.3.6.1.4.1.89.26.13.1,RADLAN-IpRouter::rlIpRoutingProtPreferenceDirect,INTEGER,read-write,,current,,The Preference given to routes whose origin is Local IP (i.e. IP interface in IpAddrTable) It is proposed that the value will be higher than dynamic routing protocols. The change of its value may lead to unexpected results, such as routing loops
.1.3.6.1.4.1.89.26.13.2,RADLAN-IpRouter::rlIpRoutingProtPreferenceStatic,INTEGER,read-write,,current,,The Preference given to routes whose origin is Men configured by Net managment tools, i.e. Command line or SNMP configured.
.1.3.6.1.4.1.89.26.13.3,RADLAN-IpRouter::rlIpRoutingProtPreferenceOspfInter,INTEGER,read-write,,current,,The Preference given to routes whose origin is internal ospf Links. Relate to routes which are based on OSPF Link State Advertisements of type 1-4
.1.3.6.1.4.1.89.26.13.4,RADLAN-IpRouter::rlIpRoutingProtPreferenceOspfExt,INTEGER,read-write,,current,,The Preference given to routes whose origin is external to OSPF i.e. routes imported by as OSPF AS Border router. Relate to routes which are based on OSPF Link State Advertisements of types 5 and 7
.1.3.6.1.4.1.89.26.13.5,RADLAN-IpRouter::rlIpRoutingProtPreferenceOspfReject,INTEGER,read-write,,current,,The Preference given to routes whose origin is OSPF and Are inserted to cover gaps in net range
.1.3.6.1.4.1.89.26.13.6,RADLAN-IpRouter::rlIpRoutingProtPreferenceRipNormal,INTEGER,read-write,,current,,The Preference given to routes whose origin is RIP routing domain
.1.3.6.1.4.1.89.26.13.7,RADLAN-IpRouter::rlIpRoutingProtPreferenceRipAggregate,INTEGER,read-write,,current,,The Preference given to routes whose origin is aggregation As a method of rip1 to handle the CIDR schema. The idea is that ripv1 aggregates route which fall into certion class of IP. This route is a discard route in effect, and is referenced, at forwarding route look up, if there is no beter match. (which means the route is not available)
.1.3.6.1.4.1.89.26.13.8,RADLAN-IpRouter::rlIpRoutingProtPreferenceBgp,INTEGER,read-write,,current,,The Preference given to routes whose origin is BGP ROUTERS (EBGP or IBGP)
.1.3.6.1.4.1.89.26.14,RADLAN-IP::rlOspf,,,,,,
.1.3.6.1.4.1.89.26.14.1,RADLAN-IpRouter::rlOspfMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.26.14.2,RADLAN-IpRouter::rlOspfAutoInterfaceCreation,INTEGER,read-only,,current,enable(1):disable(2),This variable controls OSPF automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of OSPF Interface. If value is disable OSPF interface is created but not activated. The option is a platform parameter.
.1.3.6.1.4.1.89.26.14.3,RADLAN-IpRouter::rlOspfIfExtTable,,not-accessible,,current,,The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
.1.3.6.1.4.1.89.26.14.3.1,RADLAN-IpRouter::rlOspfIfExtEntry,,not-accessible,,current,,The OSPF interface table extension for md5 authentication
.1.3.6.1.4.1.89.26.14.3.1.1,RADLAN-IpRouter::rlOspfifKeyChain,OCTET,read-write,,current,,Name of the key-chain which ospf interface uses for md5 authentication
.1.3.6.1.4.1.89.26.14.4,RADLAN-IpRouter::rlOspfRtrLnkTable,,not-accessible,,current,,Router Link State Advertisement.
.1.3.6.1.4.1.89.26.14.4.1,RADLAN-IpRouter::rlOspfRtrLnkEntry,,not-accessible,rlOspfRtrLnkAreaId:rlOspfRtrLnkLsid:rlOspfRtrLnkRouterId:rlOspfRtrLnkIdx,current,,A single entry from Router LSA.
.1.3.6.1.4.1.89.26.14.4.1.1,RADLAN-IpRouter::rlOspfRtrLnkAreaId,IpAddress,read-only,,current,,The 32 bit identifier of the Area from which the LSA was received.
.1.3.6.1.4.1.89.26.14.4.1.2,RADLAN-IpRouter::rlOspfRtrLnkLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.89.26.14.4.1.3,RADLAN-IpRouter::rlOspfRtrLnkRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.89.26.14.4.1.4,RADLAN-IpRouter::rlOspfRtrLnkIdx,Unsigned32,read-only,,current,,The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
.1.3.6.1.4.1.89.26.14.4.1.5,RADLAN-IpRouter::rlOspfRtrLnkSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.89.26.14.4.1.6,RADLAN-IpRouter::rlOspfRtrLnkAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.89.26.14.4.1.7,RADLAN-IpRouter::rlOspfRtrLnkChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.89.26.14.4.1.8,RADLAN-IpRouter::rlOspfRtrLnkLength,Unsigned32,read-only,,current,,The lenth in bytes of the LSA. This includes the 20 byte LSA header.
.1.3.6.1.4.1.89.26.14.4.1.9,RADLAN-IpRouter::rlOspfRtrLnkBitV,INTEGER,read-only,,current,off(1):on(2),When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint).
.1.3.6.1.4.1.89.26.14.4.1.10,RADLAN-IpRouter::rlOspfRtrLnkBitE,INTEGER,read-only,,current,off(1):on(2),When set, the router is an AS boundary router (E is for external).
.1.3.6.1.4.1.89.26.14.4.1.11,RADLAN-IpRouter::rlOspfRtrLnkBitB,INTEGER,read-only,,current,off(1):on(2),When set, the router is an area border router (B is for border).
.1.3.6.1.4.1.89.26.14.4.1.12,RADLAN-IpRouter::rlOspfRtrLnkLinks,Unsigned32,read-only,,current,,The number of router links described in this LSA. This must be the total collection of router links (i.e., interfaces) to the area.
.1.3.6.1.4.1.89.26.14.4.1.13,RADLAN-IpRouter::rlOspfRtrLnkLinkID,IpAddress,read-only,,current,,Identifies the object that this router link connects to. Value depends on the link's Type.
.1.3.6.1.4.1.89.26.14.4.1.14,RADLAN-IpRouter::rlOspfRtrLnkLinkData,IpAddress,read-only,,current,,Value depends on the link's Type field.
.1.3.6.1.4.1.89.26.14.4.1.15,RADLAN-IpRouter::rlOspfRtrLnkType,INTEGER,read-only,,current,pointToPoint(1):transitNetwork(2):stubNetwork(3):virtualLink(4),A quick description of the router link.
.1.3.6.1.4.1.89.26.14.4.1.16,RADLAN-IpRouter::rlOspfRtrLnkMetric,Unsigned32,read-only,,current,,The cost of using this router link.
.1.3.6.1.4.1.89.26.14.5,RADLAN-IpRouter::rlOspfNetLnkTable,,not-accessible,,current,,Network Link State Advertisement.
.1.3.6.1.4.1.89.26.14.5.1,RADLAN-IpRouter::rlOspfNetLnkEntry,,not-accessible,rlOspfNetLnkAreaId:rlOspfNetLnkLsid:rlOspfNetLnkRouterId:rlOspfNetLnkIdx,current,,A single entry from Network LSA.
.1.3.6.1.4.1.89.26.14.5.1.1,RADLAN-IpRouter::rlOspfNetLnkAreaId,IpAddress,read-only,,current,,The 32 bit identifier of the Area from which the LSA was received.
.1.3.6.1.4.1.89.26.14.5.1.2,RADLAN-IpRouter::rlOspfNetLnkLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.89.26.14.5.1.3,RADLAN-IpRouter::rlOspfNetLnkRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.89.26.14.5.1.4,RADLAN-IpRouter::rlOspfNetLnkIdx,Unsigned32,read-only,,current,,The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
.1.3.6.1.4.1.89.26.14.5.1.5,RADLAN-IpRouter::rlOspfNetLnkSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.89.26.14.5.1.6,RADLAN-IpRouter::rlOspfNetLnkAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.89.26.14.5.1.7,RADLAN-IpRouter::rlOspfNetLnkChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.89.26.14.5.1.8,RADLAN-IpRouter::rlOspfNetLnkLength,Unsigned32,read-only,,current,,The lenth in bytes of the LSA. This includes the 20 byte LSA header.
.1.3.6.1.4.1.89.26.14.5.1.9,RADLAN-IpRouter::rlOspfNetLnkMask,IpAddress,read-only,,current,,The IP address mask for the network.
.1.3.6.1.4.1.89.26.14.5.1.10,RADLAN-IpRouter::rlOspfNetLnkAttRouter,IpAddress,read-only,,current,,The Router IDs of each of the routers attached to the network.
.1.3.6.1.4.1.89.26.14.6,RADLAN-IpRouter::rlOspfSumLnkTable,,not-accessible,,current,,Summary Link State Advertisement for network (Type 3).
.1.3.6.1.4.1.89.26.14.6.1,RADLAN-IpRouter::rlOspfSumLnkEntry,,not-accessible,rlOspfSumLnkAreaId:rlOspfSumLnkLsid:rlOspfSumLnkRouterId,current,,A single entry from Summary LSA.
.1.3.6.1.4.1.89.26.14.6.1.1,RADLAN-IpRouter::rlOspfSumLnkAreaId,IpAddress,read-only,,current,,The 32 bit identifier of the Area from which the LSA was received.
.1.3.6.1.4.1.89.26.14.6.1.2,RADLAN-IpRouter::rlOspfSumLnkLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.89.26.14.6.1.3,RADLAN-IpRouter::rlOspfSumLnkRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.89.26.14.6.1.4,RADLAN-IpRouter::rlOspfSumLnkSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.89.26.14.6.1.5,RADLAN-IpRouter::rlOspfSumLnkAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.89.26.14.6.1.6,RADLAN-IpRouter::rlOspfSumLnkChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.89.26.14.6.1.7,RADLAN-IpRouter::rlOspfSumLnkLength,Unsigned32,read-only,,current,,The lenth in bytes of the LSA. This includes the 20 byte LSA header.
.1.3.6.1.4.1.89.26.14.6.1.8,RADLAN-IpRouter::rlOspfSumLnkMask,IpAddress,read-only,,current,,Value depends on the link's Type field.
.1.3.6.1.4.1.89.26.14.6.1.9,RADLAN-IpRouter::rlOspfSumLnkMetric,Unsigned32,read-only,,current,,The cost of using this router link.
.1.3.6.1.4.1.89.26.14.7,RADLAN-IpRouter::rlOspfAsbLnkTable,,not-accessible,,current,,Summary Link State Advertisement for ASBR (Type 4).
.1.3.6.1.4.1.89.26.14.7.1,RADLAN-IpRouter::rlOspfAsbLnkEntry,,not-accessible,rlOspfAsbLnkAreaId:rlOspfAsbLnkLsid:rlOspfAsbLnkRouterId,current,,A single entry from Summary LSA.
.1.3.6.1.4.1.89.26.14.7.1.1,RADLAN-IpRouter::rlOspfAsbLnkAreaId,IpAddress,read-only,,current,,The 32 bit identifier of the Area from which the LSA was received.
.1.3.6.1.4.1.89.26.14.7.1.2,RADLAN-IpRouter::rlOspfAsbLnkLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.89.26.14.7.1.3,RADLAN-IpRouter::rlOspfAsbLnkRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.89.26.14.7.1.4,RADLAN-IpRouter::rlOspfAsbLnkSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.89.26.14.7.1.5,RADLAN-IpRouter::rlOspfAsbLnkAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.89.26.14.7.1.6,RADLAN-IpRouter::rlOspfAsbLnkChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.89.26.14.7.1.7,RADLAN-IpRouter::rlOspfAsbLnkLength,Unsigned32,read-only,,current,,The lenth in bytes of the LSA. This includes the 20 byte LSA header.
.1.3.6.1.4.1.89.26.14.7.1.8,RADLAN-IpRouter::rlOspfAsbLnkMetric,Unsigned32,read-only,,current,,The cost of using this router link.
.1.3.6.1.4.1.89.26.14.8,RADLAN-IpRouter::rlOspfAseLnkTable,,not-accessible,,current,,External Link State Advertisement.
.1.3.6.1.4.1.89.26.14.8.1,RADLAN-IpRouter::rlOspfAseLnkEntry,,not-accessible,rlOspfAseLnkLsid:rlOspfAseLnkRouterId,current,,A single entry from External LSA.
.1.3.6.1.4.1.89.26.14.8.1.1,RADLAN-IpRouter::rlOspfAseLnkLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.89.26.14.8.1.2,RADLAN-IpRouter::rlOspfAseLnkRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.89.26.14.8.1.3,RADLAN-IpRouter::rlOspfAseLnkSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.89.26.14.8.1.4,RADLAN-IpRouter::rlOspfAseLnkAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.89.26.14.8.1.5,RADLAN-IpRouter::rlOspfAseLnkChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.89.26.14.8.1.6,RADLAN-IpRouter::rlOspfAseLnkLength,Unsigned32,read-only,,current,,The lenth in bytes of the LSA. This includes the 20 byte LSA header.
.1.3.6.1.4.1.89.26.14.8.1.7,RADLAN-IpRouter::rlOspfAseLnkMask,IpAddress,read-only,,current,,Value depends on the link's Type field.
.1.3.6.1.4.1.89.26.14.8.1.8,RADLAN-IpRouter::rlOspfAseLnkFrwAddress,IpAddress,read-only,,current,,Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router).
.1.3.6.1.4.1.89.26.14.8.1.9,RADLAN-IpRouter::rlOspfAseLnkBitE,INTEGER,read-only,,current,off(1):on(2),The type of external metric. If bit E is set, the metric specified is a Type 2 external metric.
.1.3.6.1.4.1.89.26.14.8.1.10,RADLAN-IpRouter::rlOspfAseLnkMetric,Unsigned32,read-only,,current,,The cost of this route.
.1.3.6.1.4.1.89.26.14.8.1.11,RADLAN-IpRouter::rlOspfAseLnkTag,Unsigned32,read-only,,current,,A 32-bit field attached to each external route.
.1.3.6.1.4.1.89.26.14.9,RADLAN-IpRouter::rlospfVirtIfExtTable,,not-accessible,,current,,The Virtual Interface Table describes the virtual links that the OSPF Process is configured to carry on.
.1.3.6.1.4.1.89.26.14.9.1,RADLAN-IpRouter::rlospfVirtIfExtEntry,,not-accessible,,current,,The OSPF virtual interface table extension for md5 authentication
.1.3.6.1.4.1.89.26.14.9.1.1,RADLAN-IpRouter::rlospfVirtifKeyChain,OCTET,read-write,,current,,Name of the key-chain which ospf virtual interface uses for md5 authentication
.1.3.6.1.4.1.89.26.15,RADLAN-IP::rlIpAddrTableMibVersion,INTEGER,read-only,,current,,The IpAddrTable MIB's version.
.1.3.6.1.4.1.89.26.16,RADLAN-IP::rlIpCidrRouteExtTable,,not-accessible,,current,,Augmenting ipCidrRouteTable (ip forwarfing information table) for added info as read only
.1.3.6.1.4.1.89.26.16.1,RADLAN-IP::rlIpCidrRouteExtEntry,,not-accessible,,current,,A row of the table ipCidrRouteTable Extended by this definition.
.1.3.6.1.4.1.89.26.16.1.1,RADLAN-IP::rlIpCidrRouteProto,INTEGER,read-only,,current,local(1):netmgmt(2):rip(3):ospfInternal(4):ospfExternal(5):ospfAggregateNetRange(6):bgp4Internal(7):bgp4External(8):aggregateRoute(9):other(10),Added infor for ipCidrRouteTable. extends the info of ipCidrRouteProto to show the route inner protocol. Allowes the user to see which type of route in the protocol e.g. ospf internal, ospf external.
.1.3.6.1.4.1.89.26.17,RADLAN-IP::rlIpStaticRoute,,,,,,
.1.3.6.1.4.1.89.26.17.1,RADLAN-IP::rlIpStaticRouteTable,,not-accessible,,current,,This entity's static (user configured) IP Routing table. entries are MAX-ACCESSible even if not used for forwarding 
.1.3.6.1.4.1.89.26.17.1.1,RADLAN-IP::rlIpStaticRouteEntry,,not-accessible,rlIpStaticRouteDest:rlIpStaticRouteMask:rlIpStaticRouteTos:rlIpStaticRouteNextHop,current,,A particular Static(user configured) route to a particular destina- tion, under a particular policy.
.1.3.6.1.4.1.89.26.17.1.1.1,RADLAN-IP::rlIpStaticRouteDest,IpAddress,read-only,,current,,The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the rlIpStaticRouteMask object is not equal to x.
.1.3.6.1.4.1.89.26.17.1.1.2,RADLAN-IP::rlIpStaticRouteMask,IpAddress,read-only,,current,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rlIpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rlIpStaticRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the rlIpStaticRouteDest object is not equal to ipCidrRoute- Dest.
.1.3.6.1.4.1.89.26.17.1.1.3,RADLAN-IP::rlIpStaticRouteTos,INTEGER,read-only,,current,,See ipCidrRouteTos definition For now only value 0 is valid
.1.3.6.1.4.1.89.26.17.1.1.4,RADLAN-IP::rlIpStaticRouteNextHop,IpAddress,read-only,,current,,On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
.1.3.6.1.4.1.89.26.17.1.1.5,RADLAN-IP::rlIpStaticRouteMetric,INTEGER,read-write,,current,,The routing metric for this route. The semantics of this metric are determined by the user. normal semantic will be next hop count or some administarative distance to create routing policy.
.1.3.6.1.4.1.89.26.17.1.1.6,RADLAN-IP::rlIpStaticRouteType,INTEGER,read-write,,current,reject(1):local(2):remote(3),The type of route. Note that local(3) refers to a route for which the next hop is the final destination this is the case when user overides the a local interface entry to change it parameters; remote(4) refers to a route for which the next hop is not the final destina- tion. reject (2) refers to a route which, if matched, discards the message as unreachable. This is may be used as a means of correctly aggregating routes, When static routes are distributed (leaked) to other protocols.
.1.3.6.1.4.1.89.26.17.1.1.7,RADLAN-IP::rlIpStaticRouteNextHopAS,INTEGER,read-write,,current,,The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.
.1.3.6.1.4.1.89.26.17.1.1.8,RADLAN-IP::rlIpStaticRouteForwardingStatus,INTEGER,read-only,,current,active(1):inactive(2),active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is configured is down. (Note: ip interface down may be for two reason - its admin status or the L2 interface , on which the ip interface is configured, status
.1.3.6.1.4.1.89.26.17.1.1.9,RADLAN-IP::rlIpStaticRouteRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.26.18,RADLAN-IP::rlIpRouter,,,,,,
.1.3.6.1.4.1.89.29,RADLAN-MIB::rsTunning,,,,,,
.1.3.6.1.4.1.89.29.1,RADLAN-Tuning::rsHighPriority,INTEGER,read-write,,current,,This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
.1.3.6.1.4.1.89.29.2,RADLAN-Tuning::rsLowPriority,INTEGER,read-write,,current,,This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
.1.3.6.1.4.1.89.29.3,RADLAN-Tuning::rsDbgLevel,INTEGER,read-write,,current,,This variable indicates the debug level the Router Server works. the range of this variable is 1..100 
.1.3.6.1.4.1.89.29.4,RADLAN-Tuning::rsDiagnosticsTable,,not-accessible,,current,,The diagnostics table of the agent
.1.3.6.1.4.1.89.29.4.1,RADLAN-Tuning::rsDiagnosticsEntry,,not-accessible,rsDiagnosticsRequestId,current,,The row definition for this table.
.1.3.6.1.4.1.89.29.4.1.1,RADLAN-Tuning::rsDiagnosticsRequestId,INTEGER,read-only,,current,,The request id of the rejected SNMP request whose diagnostics are specified by this entry. If request id 0xFFFFFFFF is given, the diagnostic of the last rejected SNMP request sent by the querying NMS is returned.
.1.3.6.1.4.1.89.29.4.1.2,RADLAN-Tuning::rsDiagnosticsCode,INTEGER,read-only,,current,,The code of the rejected the SNMP request whose diagnostics are specified by this entry. This code may be used to find out the reason for rejection if the diagnostic text is unavailable.
.1.3.6.1.4.1.89.29.4.1.3,RADLAN-Tuning::rsDiagnosticsLocation,INTEGER,read-only,,current,,The internal location in the SW rejecting the SNMP request whose diagnostics are specified by this entry. This information is available for debugging purposes only and will be returned in GET requests only if rsDbgLevel >= 99. 
.1.3.6.1.4.1.89.29.4.1.4,RADLAN-Tuning::rsDiagnosticsText,OCTET,read-only,,current,,The diagnostic text of the rejected SNMP request whose diagnostics are specified by this entry.
.1.3.6.1.4.1.89.29.5,RADLAN-Tuning::rsConfirmMessagTab,INTEGER,read-write,,current,,This variable enables the operator to confirm all the message in the event Message Table.
.1.3.6.1.4.1.89.29.6,RADLAN-Tuning::eventMessageTable,,not-accessible,,current,,The Event Message table of the agent
.1.3.6.1.4.1.89.29.6.1,RADLAN-Tuning::eventMessageEntry,,not-accessible,eventNum,current,,The row definition for this table.
.1.3.6.1.4.1.89.29.6.1.1,RADLAN-Tuning::eventNum,INTEGER,read-only,,current,,The event number,the index of this table.
.1.3.6.1.4.1.89.29.6.1.2,RADLAN-Tuning::eventDesc,OCTET,read-only,,current,,The event discription, this text will include time and severity.
.1.3.6.1.4.1.89.29.7,RADLAN-Tuning::reaTunning,,,,,,
.1.3.6.1.4.1.89.29.7.4,RADLAN-Tuning::reaIpForwardEnable,INTEGER,read-write,,current,enable(1):disable(2),The Platform will perform fast IP forwarding if only if this variable's value is enable.
.1.3.6.1.4.1.89.29.7.5,RADLAN-Tuning::reaIpxForwardEnable,INTEGER,read-write,,current,enable(1):disable(2),The Platform will perform fast IPX forwarding if only if this variable's value is enable.
.1.3.6.1.4.1.89.29.8,RADLAN-Tuning::rsMaxEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.1,RADLAN-Tuning::rsMaxBridgeForwardingEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.1.1,RADLAN-Tuning::rsMaxBrgFrwEntries,INTEGER,read-only,,current,,Maximal number of entries in bridge forwarding table.
.1.3.6.1.4.1.89.29.8.1.2,RADLAN-Tuning::rsMaxBrgFrwEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in bridge forwarding table.
.1.3.6.1.4.1.89.29.8.2,RADLAN-Tuning::rsMaxIpForwardingEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.2.1,RADLAN-Tuning::rsMaxIpFrwEntries,INTEGER,read-only,,current,,Maximal number of entries in Ip forwarding table.
.1.3.6.1.4.1.89.29.8.2.2,RADLAN-Tuning::rsMaxIpFrwEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in Ip forwarding table.
.1.3.6.1.4.1.89.29.8.3,RADLAN-Tuning::rsMaxArpEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.3.1,RADLAN-Tuning::rsMaxArpEntries,INTEGER,read-only,,current,,Maximal number of entries in Arp forwarding table.
.1.3.6.1.4.1.89.29.8.3.2,RADLAN-Tuning::rsMaxArpEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in Arp forwarding table.
.1.3.6.1.4.1.89.29.8.4,RADLAN-Tuning::rsMaxIpxForwardingEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.4.1,RADLAN-Tuning::rsMaxIpxFrwEntries,INTEGER,read-only,,current,,Maximal number of entries in Ipx forwarding table.
.1.3.6.1.4.1.89.29.8.4.2,RADLAN-Tuning::rsMaxIpxFrwEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in Ipx forwarding table.
.1.3.6.1.4.1.89.29.8.5,RADLAN-Tuning::rsMaxIpxSapEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.5.1,RADLAN-Tuning::rsMaxIpxSapEntries,INTEGER,read-only,,current,,Maximal number of entries in IpxSap table.
.1.3.6.1.4.1.89.29.8.5.2,RADLAN-Tuning::rsMaxIpxSapEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in IpxSap table.
.1.3.6.1.4.1.89.29.8.6,RADLAN-Tuning::rsMaxDspClntEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.6.1,RADLAN-Tuning::rsMaxDspClntEntries,INTEGER,read-only,,current,,Maximal number of entries in rsSdClientsTable.
.1.3.6.1.4.1.89.29.8.6.2,RADLAN-Tuning::rsMaxDspClntEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in rsSdClientsTable.
.1.3.6.1.4.1.89.29.8.9,RADLAN-Tuning::rsMaxIpFftEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.9.1,RADLAN-Tuning::rsMaxIpSFftEntries,INTEGER,read-only,,current,,The current maximal size of one IP SFFT Table.
.1.3.6.1.4.1.89.29.8.9.2,RADLAN-Tuning::rsMaxIpSFftEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of one IP SFFT Table.
.1.3.6.1.4.1.89.29.8.9.3,RADLAN-Tuning::rsMaxIpNFftEntries,INTEGER,read-only,,current,,The current maximal size of one IP NFFT Table.
.1.3.6.1.4.1.89.29.8.9.4,RADLAN-Tuning::rsMaxIpNFftEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of one IP NFFT Table.
.1.3.6.1.4.1.89.29.8.9.5,RADLAN-Tuning::rsMaxIpSFftSysEntries,INTEGER,read-only,,current,,The current maximal size of the SYSTEM IP SFFT Table.
.1.3.6.1.4.1.89.29.8.9.6,RADLAN-Tuning::rsMaxIpSFftSysEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of the SYSTEM IP SFFT Table.
.1.3.6.1.4.1.89.29.8.9.7,RADLAN-Tuning::rsMaxIpNFftSysEntries,INTEGER,read-only,,current,,The current maximal size of the SYSTEM IP NFFT Table.
.1.3.6.1.4.1.89.29.8.9.8,RADLAN-Tuning::rsMaxIpNFftSysEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of the SYSTEM IP NFFT Table.
.1.3.6.1.4.1.89.29.8.9.9,RADLAN-Tuning::rsMaxIpNextHopEntries,INTEGER,read-only,,current,,The current maximal size of one IP NextHop Table.
.1.3.6.1.4.1.89.29.8.9.10,RADLAN-Tuning::rsMaxIpNextHopEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of one NextHop Table.
.1.3.6.1.4.1.89.29.8.10,RADLAN-Tuning::rsMaxIpxFftEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.10.1,RADLAN-Tuning::rsMaxIpxSFftEntries,INTEGER,read-only,,current,,The current maximal size of one IPX SFFT Table.
.1.3.6.1.4.1.89.29.8.10.2,RADLAN-Tuning::rsMaxIpxSFftEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of one IPX SFFT Table.
.1.3.6.1.4.1.89.29.8.10.3,RADLAN-Tuning::rsMaxIpxNFftEntries,INTEGER,read-only,,current,,The current maximal size of one IPX NFFT Table.
.1.3.6.1.4.1.89.29.8.10.4,RADLAN-Tuning::rsMaxIpxNFftEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of one IPX NFFT Table.
.1.3.6.1.4.1.89.29.8.10.5,RADLAN-Tuning::rsMaxIpxSFftSysEntries,INTEGER,read-only,,current,,The current maximal size of the SYSTEM IPX SFFT Table.
.1.3.6.1.4.1.89.29.8.10.6,RADLAN-Tuning::rsMaxIpxSFftSysEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of the SYSTEM IPX SFFT Table.
.1.3.6.1.4.1.89.29.8.10.7,RADLAN-Tuning::rsMaxIpxNFftSysEntries,INTEGER,read-only,,current,,The current maximal size of the SYSTEM IPX NFFT Table.
.1.3.6.1.4.1.89.29.8.10.8,RADLAN-Tuning::rsMaxIpxNFftSysEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal size of the SYSTEM IPX NFFT Table.
.1.3.6.1.4.1.89.29.8.11,RADLAN-Tuning::rsMaxDhcpTuning,,,,,,
.1.3.6.1.4.1.89.29.8.11.1,RADLAN-Tuning::rsMaxDhcpConns,INTEGER,read-only,,current,,The current maximal number of DHCP connections.
.1.3.6.1.4.1.89.29.8.11.2,RADLAN-Tuning::rsMaxDhcpConnsAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal number of DHCP connections.
.1.3.6.1.4.1.89.29.8.12,RADLAN-Tuning::rsMaxIpmTuning,,,,,,
.1.3.6.1.4.1.89.29.8.12.1,RADLAN-Tuning::rsMaxIpmFftEntriesTuning,,,,,,
.1.3.6.1.4.1.89.29.8.12.1.1,RADLAN-Tuning::rsMaxIpmFftEntries,INTEGER,read-only,,current,,The current maximal number of the IPM FFT Tables.
.1.3.6.1.4.1.89.29.8.12.1.2,RADLAN-Tuning::rsMaxIpmFftEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal number of the IPM FFT Tables.
.1.3.6.1.4.1.89.29.8.12.1.3,RADLAN-Tuning::rsIpmFftAging,INTEGER,read-write,,current,,The aging timeout of the IPM FFT Tables.
.1.3.6.1.4.1.89.29.8.12.2,RADLAN-Tuning::rsMaxIgmpTuning,,,,,,
.1.3.6.1.4.1.89.29.8.12.2.1,RADLAN-Tuning::rsMaxIgmpInterfaceEntries,INTEGER,read-only,,current,,Maximal number of entries in the IGMP Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.2.2,RADLAN-Tuning::rsMaxIgmpInterfaceEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the IGMP Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.2.3,RADLAN-Tuning::rsMaxIgmpCacheEntries,INTEGER,read-only,,current,,Maximal number of entries in the IGMP Cache Table.
.1.3.6.1.4.1.89.29.8.12.2.4,RADLAN-Tuning::rsMaxIgmpCacheEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the IGMP Cache Table.
.1.3.6.1.4.1.89.29.8.12.3,RADLAN-Tuning::rsMaxPimTuning,,,,,,
.1.3.6.1.4.1.89.29.8.12.3.1,RADLAN-Tuning::rsMaxPimNeighborEntries,INTEGER,read-only,,current,,Maximal number of entries in the PIM Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.3.2,RADLAN-Tuning::rsMaxPimNeighborEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the PIM Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.3.3,RADLAN-Tuning::rsMaxPimRouteEntries,INTEGER,read-only,,current,,Maximal number of entries in the PIM Route Table.
.1.3.6.1.4.1.89.29.8.12.3.4,RADLAN-Tuning::rsMaxPimRouteEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the PIM Route Table.
.1.3.6.1.4.1.89.29.8.12.3.5,RADLAN-Tuning::rsMaxPimRouteNextHopEntries,INTEGER,read-only,,current,,Maximal number of entries in the PIM Route Next Hop Table.
.1.3.6.1.4.1.89.29.8.12.3.6,RADLAN-Tuning::rsMaxPimRouteNextHopEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the PIM Route Next Hop Table.
.1.3.6.1.4.1.89.29.8.12.3.7,RADLAN-Tuning::rsMaxPimInterfaceEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of interfaces in the PIM Interface Table.
.1.3.6.1.4.1.89.29.8.12.3.8,RADLAN-Tuning::rsMaxPimInterfaceEntries,INTEGER,read-write,,current,,Maximal number of interfaces in the PIM Interface Table.
.1.3.6.1.4.1.89.29.8.12.4,RADLAN-Tuning::rsMaxDvmrpTuning,,,,,,
.1.3.6.1.4.1.89.29.8.12.4.1,RADLAN-Tuning::rsMaxDvmrpNeighborEntries,INTEGER,read-only,,current,,Maximal number of entries in the Dvmrp Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.4.2,RADLAN-Tuning::rsMaxDvmrpNeighborEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the Dvmrp Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.4.3,RADLAN-Tuning::rsMaxDvmrpRouteEntries,INTEGER,read-only,,current,,Maximal number of entries in the Dvmrp Route Table.
.1.3.6.1.4.1.89.29.8.12.4.4,RADLAN-Tuning::rsMaxDvmrpRouteEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the Dvmrp Route Table.
.1.3.6.1.4.1.89.29.8.12.4.5,RADLAN-Tuning::rsMaxDvmrpMRouteEntries,INTEGER,read-only,,current,,Maximal number of entries in the Dvmrp Multicast Route Table.
.1.3.6.1.4.1.89.29.8.12.4.6,RADLAN-Tuning::rsMaxDvmrpMRouteEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the Dvmrp Multicast Route Table.
.1.3.6.1.4.1.89.29.8.12.4.7,RADLAN-Tuning::rsMaxDvmrpInterfaceEntries,INTEGER,read-write,,current,,Maximal number of interfaces in the Dvmrp Interface Table.
.1.3.6.1.4.1.89.29.8.12.4.8,RADLAN-Tuning::rsMaxDvmrpInterfaceEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of interfaces in the Dvmrp Interface Table.
.1.3.6.1.4.1.89.29.8.12.5,RADLAN-Tuning::rsMaxPigmpTuning,,,,,,
.1.3.6.1.4.1.89.29.8.12.5.1,RADLAN-Tuning::rsMaxPigmpRouteEntries,INTEGER,read-only,,current,,Maximal number of entries in the IGMP Proxy Routing Table.
.1.3.6.1.4.1.89.29.8.12.5.2,RADLAN-Tuning::rsMaxPigmpRouteEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the IGMP Proxy Routing Table.
.1.3.6.1.4.1.89.29.8.12.6,RADLAN-Tuning::rsMaxPimSmTuning,,,,,,
.1.3.6.1.4.1.89.29.8.12.6.1,RADLAN-Tuning::rsMaxPimSmNeighborEntries,INTEGER,read-only,,current,,Maximal number of entries in the PIM Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.6.2,RADLAN-Tuning::rsMaxPimSmNeighborEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the PIM Neighbor Table.
.1.3.6.1.4.1.89.29.8.12.6.3,RADLAN-Tuning::rsMaxPimSmRouteEntries,INTEGER,read-only,,current,,Maximal number of entries in the PIM Route Table.
.1.3.6.1.4.1.89.29.8.12.6.4,RADLAN-Tuning::rsMaxPimSmRouteEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the PIM Route Table.
.1.3.6.1.4.1.89.29.8.12.6.5,RADLAN-Tuning::rsMaxPimSmInterfaceEntries,INTEGER,read-only,,current,,Maximal number of entries in the PIM Interface Table.
.1.3.6.1.4.1.89.29.8.12.6.6,RADLAN-Tuning::rsMaxPimSmInterfaceEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the PIM Interface Table.
.1.3.6.1.4.1.89.29.8.12.6.7,RADLAN-Tuning::rsMaxPimSmRPSetEntries,INTEGER,read-only,,current,,Maximal number of entries in the RPSet Table.
.1.3.6.1.4.1.89.29.8.12.6.8,RADLAN-Tuning::rsMaxPimSmRPSetEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the RPSet Table.
.1.3.6.1.4.1.89.29.8.12.6.9,RADLAN-Tuning::rsMaxPimSmCRPEntries,INTEGER,read-only,,current,,Maximal number of entries in the RPSet Table.
.1.3.6.1.4.1.89.29.8.12.6.10,RADLAN-Tuning::rsMaxPimSmCRPEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the RPSet Table.
.1.3.6.1.4.1.89.29.8.12.6.11,RADLAN-Tuning::rsMaxNumberRpAddresesInGroupRange,INTEGER,read-only,,current,,Maximal number of rp addresses per group range in the RPSet Table.
.1.3.6.1.4.1.89.29.8.12.6.12,RADLAN-Tuning::rsMaxNumberRpAddresesInGroupRangeAfterReset,INTEGER,read-write,,current,,Future maximal number of rp addresses per group range in the RPSet Table.
.1.3.6.1.4.1.89.29.8.13,RADLAN-Tuning::rsMaxRmonTuning,,,,,,
.1.3.6.1.4.1.89.29.8.13.1,RADLAN-Tuning::rsMaxRmonLogEntries,INTEGER,read-only,,current,,Maximal number of entries in RMON Log table.
.1.3.6.1.4.1.89.29.8.13.2,RADLAN-Tuning::rsMaxRmonLogEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in RMON Log table.
.1.3.6.1.4.1.89.29.8.13.3,RADLAN-Tuning::rsMaxRmonEtherHistoryEntries,INTEGER,read-only,,current,,Maximal number of entries in RMON EtherHistory table.
.1.3.6.1.4.1.89.29.8.13.4,RADLAN-Tuning::rsMaxRmonEtherHistoryEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in RMON EtherHistory table.
.1.3.6.1.4.1.89.29.8.14,RADLAN-Tuning::rsMaxIgmpSnoopTuning,,,,,,
.1.3.6.1.4.1.89.29.8.14.1,RADLAN-Tuning::rsMaxIgmpSnoopGroupEntries,INTEGER,read-only,,current,,The maximum number of entries in the IGMP Snooping group table.
.1.3.6.1.4.1.89.29.8.14.2,RADLAN-Tuning::rsMaxIgmpSnoopGroupEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the IGMP Snooping group table.
.1.3.6.1.4.1.89.29.8.15,RADLAN-Tuning::rsMaxVlansTuning,,,,,,
.1.3.6.1.4.1.89.29.8.15.1,RADLAN-Tuning::rsMaxVlansEntries,INTEGER,read-only,,current,,The maximum number of entries in the VLANs table.
.1.3.6.1.4.1.89.29.8.15.2,RADLAN-Tuning::rsMaxVlansEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the VLANs table.
.1.3.6.1.4.1.89.29.8.16,RADLAN-Tuning::rsMaxPolicyTuning,,,,,,
.1.3.6.1.4.1.89.29.8.16.1,RADLAN-Tuning::rsMaxPolicyMaxRulesEntries,INTEGER,read-only,,current,,Maximal number of entries in the Policy Route Table.
.1.3.6.1.4.1.89.29.8.16.2,RADLAN-Tuning::rsMaxPolicyMaxRulesEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the Policy Route Table.
.1.3.6.1.4.1.89.29.8.16.3,RADLAN-Tuning::rsMaxPolicySimpleMibMaxRulesEntries,INTEGER,read-only,,current,,Maximal number of entries in the Policy SimpleMib Table.
.1.3.6.1.4.1.89.29.8.16.4,RADLAN-Tuning::rsMaxPolicySimpleMibMaxRulesEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the Policy SimpleMib Table.
.1.3.6.1.4.1.89.29.8.16.5,RADLAN-Tuning::rsMaxPolicySimpleMibMaxProfilesEntries,INTEGER,read-only,,current,,Maximal number of entries in the profile Policy SimpleMib Table.
.1.3.6.1.4.1.89.29.8.16.6,RADLAN-Tuning::rsMaxPolicySimpleMibMaxProfilesEntriesAfterReset,INTEGER,read-write,,current,,Future maximal number of entries in the profile Policy SimpleMib Table.
.1.3.6.1.4.1.89.29.8.17,RADLAN-Tuning::rsMaxGvrpVlansTuning,,,,,,
.1.3.6.1.4.1.89.29.8.17.1,RADLAN-Tuning::rsMaxGvrpVlans,INTEGER,read-only,,current,,The maximum number of VLANs that can participant in Gvrp.
.1.3.6.1.4.1.89.29.8.17.2,RADLAN-Tuning::rsMaxGvrpVlansAfterReset,INTEGER,read-write,,current,,Future maximal number of VLANs that can participant in Gvrp.
.1.3.6.1.4.1.89.29.8.18,RADLAN-Tuning::rsMaxTraceRouteTuning,,,,,,
.1.3.6.1.4.1.89.29.8.18.1,RADLAN-Tuning::rsMaxTraceRouteControlEntries,INTEGER,read-only,,current,,The maximum number of trace route control entries.
.1.3.6.1.4.1.89.29.8.18.2,RADLAN-Tuning::rsMaxTraceRouteControEntriesAfterReset,INTEGER,read-write,,current,,Future maximum number of trace route control entries.
.1.3.6.1.4.1.89.29.8.18.3,RADLAN-Tuning::rsMaxTraceRouteProbeHistoryEntries,INTEGER,read-only,,current,,The maximum number of trace route probe history entries.
.1.3.6.1.4.1.89.29.8.18.4,RADLAN-Tuning::rsMaxTraceRouteProbeHistoryEntriesAfterReset,INTEGER,read-write,,current,,Future maximum number of trace route probe history entries.
.1.3.6.1.4.1.89.29.8.19,RADLAN-Tuning::rsMaxSnmpTuning,,,,,,
.1.3.6.1.4.1.89.29.8.19.1,RADLAN-Tuning::rsMaxSnmpCommunityEntries,INTEGER,read-only,,current,,The maximum number of snmpCommunityTable entries.
.1.3.6.1.4.1.89.29.8.19.2,RADLAN-Tuning::rsMaxSnmpCommunityEntriesAfterReset,INTEGER,read-write,,current,,Future maximum number of snmpCommunityTable entries.
.1.3.6.1.4.1.89.29.8.20,RADLAN-Tuning::rsMaxSocketTuning,,,,,,
.1.3.6.1.4.1.89.29.8.20.1,RADLAN-Tuning::rsMaxNumberOfSockets,INTEGER,read-only,,current,,Maximal number of sockets.
.1.3.6.1.4.1.89.29.8.20.2,RADLAN-Tuning::rsMaxNumberOfSocketsAfterReset,INTEGER,read-write,,current,,Future Maximal number of sockets.
.1.3.6.1.4.1.89.29.8.20.3,RADLAN-Tuning::rsMaxSizeOfSocketDataPool,INTEGER,read-only,,current,,Maximal size of socket data pool.
.1.3.6.1.4.1.89.29.8.20.4,RADLAN-Tuning::rsMaxSizeOfSocketDataPoolAfterReset,INTEGER,read-write,,current,,Future Maximal size of socket data pool.
.1.3.6.1.4.1.89.29.8.21,RADLAN-Tuning::rsMaxIpRouteTuning,,,,,,
.1.3.6.1.4.1.89.29.8.21.1,RADLAN-Tuning::rsMaxIpPrefixes,INTEGER,read-only,,current,,Maximal number of IP prefixes that router supports.
.1.3.6.1.4.1.89.29.8.21.2,RADLAN-Tuning::rsMaxIpPrefixesAfterReset,INTEGER,read-write,,current,,FutureMaximal number of IP prefixes that router supports. 
.1.3.6.1.4.1.89.29.8.22,RADLAN-Tuning::rsMaxIpNextHopSetTuning,,,,,,
.1.3.6.1.4.1.89.29.8.22.1,RADLAN-Tuning::rsMaxIpNextHopSetEntries,INTEGER,read-only,,current,,Maximal number of NextHops that may be used for forwarding for a destinaton.
.1.3.6.1.4.1.89.29.8.22.2,RADLAN-Tuning::rsMaxIpNextHopSetEntriesAfterReset,INTEGER,read-write,,current,,FutureMaximal number of NextHops that may be used for forwarding for a destinaton. 
.1.3.6.1.4.1.89.29.8.23,RADLAN-Tuning::rsMaxIpEcmpTuning,,,,,,
.1.3.6.1.4.1.89.29.8.23.1,RADLAN-Tuning::rsMaxIpEcmpEntrySize,INTEGER,read-only,,current,,Maximum number of ECMP Sets for forwarding.
.1.3.6.1.4.1.89.29.8.23.2,RADLAN-Tuning::rsMaxIpEcmpEntrySizeAfterReset,INTEGER,read-write,,current,,FutureMaximum number of ECMP Sets for forwarding. 
.1.3.6.1.4.1.89.29.8.24,RADLAN-Tuning::rsMaxdot1xEapRequestTuning,,,,,,
.1.3.6.1.4.1.89.29.8.24.1,RADLAN-Tuning::rsMaxdot1xEapRequestEntries,INTEGER,read-only,,current,,The maximum number of eap request packets entries that can be retransmitted.
.1.3.6.1.4.1.89.29.8.24.2,RADLAN-Tuning::rsMaxdot1xEapRequestEntriesAfterReset,INTEGER,read-write,,current,,Future maximum number of eap request packets entries that can be retransmitted.
.1.3.6.1.4.1.89.29.11,RADLAN-Tuning::rsTcpTuning,,,,,,
.1.3.6.1.4.1.89.29.11.1,RADLAN-Tuning::rsTcpMemoryPoolSizeAfterReset,INTEGER,read-write,,current,,The size of the memory pool that the tcp will allocate after reset. The memory pool is used for sending packets
.1.3.6.1.4.1.89.29.11.2,RADLAN-Tuning::rsTcpMemoryPoolSize,INTEGER,read-only,,current,,The size of the memory pool that the tcp uses currently. The memory pool is used for sending packets
.1.3.6.1.4.1.89.29.12,RADLAN-Tuning::rsRadiusTuning,,,,,,
.1.3.6.1.4.1.89.29.12.1,RADLAN-Tuning::rsRadiusMemoryPoolSizeAfterReset,INTEGER,read-write,,current,,The size of the memory pool that radius will allocate after reset. The memory pool is used for attributes
.1.3.6.1.4.1.89.29.12.2,RADLAN-Tuning::rsRadiusMemoryPoolSize,INTEGER,read-only,,current,,The size of the memory pool that radius uses currently. The memory pool is used for attributes
.1.3.6.1.4.1.89.29.13,RADLAN-Tuning::rlSyslogTuning,,,,,,
.1.3.6.1.4.1.89.29.13.3,RADLAN-Tuning::rlSyslogFilePercentToDeleteWhenCompacting,Unsigned32,read-only,,current,,When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the current value.
.1.3.6.1.4.1.89.29.13.4,RADLAN-Tuning::rlSyslogFilePercentToDeleteWhenCompactingAfterReset,Unsigned32,read-write,,current,,When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the value after reset.
.1.3.6.1.4.1.89.29.13.5,RADLAN-Tuning::rlSyslogCacheSize,Unsigned32,read-only,,current,,The size of memory cache of last errors reported. This cache is cyclic. This is the current value.
.1.3.6.1.4.1.89.29.13.6,RADLAN-Tuning::rlSyslogCacheSizeAfterReset,Unsigned32,read-write,,current,,The size of memory cache of last errors reported. This cache is cyclic. This is the value after reset.
.1.3.6.1.4.1.89.29.14,RADLAN-Tuning::rlMngInfTuning,,,,,,
.1.3.6.1.4.1.89.29.14.1,RADLAN-Tuning::rlMaxNumberOfAccessRules,INTEGER,read-only,,current,,The Maximum number of rules per Access List that can be defined
.1.3.6.1.4.1.89.29.14.2,RADLAN-Tuning::rlMaxNumberOfAccessRulesAfterReset,INTEGER,read-write,,current,,The Maximum number of rules per Access List for after reset tuning
.1.3.6.1.4.1.89.29.15,RADLAN-Tuning::rlSshTuning,,,,,,
.1.3.6.1.4.1.89.29.15.1,RADLAN-Tuning::rlSshMaxAuthorizedKeysAfterReset,INTEGER,read-write,,current,,The maximum amount of authorized user keys the SSH deamon will store after reset.
.1.3.6.1.4.1.89.29.15.2,RADLAN-Tuning::rlSshMaxAuthorizedKeys,INTEGER,read-only,,current,,The maximum amount of authorized user keys the SSH deamon stores currently.
.1.3.6.1.4.1.89.29.16,RADLAN-Tuning::rsDiagnosticTextSource,INTEGER,read-write,,current,fromCLI(1):fromDiagnosticsTable(2),The source from which SNMP diagnostics message texts should be taken.
.1.3.6.1.4.1.89.29.17,RADLAN-Tuning::rsMultiSession,,,,,,
.1.3.6.1.4.1.89.29.17.1,RADLAN-Tuning::rsMultiSessionMaxSessionsAfterReset,INTEGER,read-write,,current,,The maximum number of terminal sessions (serial, telnet and ssh) available after reset.
.1.3.6.1.4.1.89.29.17.2,RADLAN-Tuning::rsMultiSessionMaxSessions,INTEGER,read-only,,current,,The maximum number of terminal sessions (serial, telnet and ssh) available.
.1.3.6.1.4.1.89.29.18,RADLAN-Tuning::rlDnsClTuning,,,,,,
.1.3.6.1.4.1.89.29.18.1,RADLAN-Tuning::rlMaxDnsClCacheRREntries,INTEGER,read-only,,current,,The current maximal number of DNS client cache entries.
.1.3.6.1.4.1.89.29.18.2,RADLAN-Tuning::rlMaxDnsClCacheRREntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal number of DNS client cache entries.
.1.3.6.1.4.1.89.29.18.3,RADLAN-Tuning::rlMaxDnsClNCacheErrEntries,INTEGER,read-only,,current,,The current maximal number of DNS client negative cache entries.
.1.3.6.1.4.1.89.29.18.4,RADLAN-Tuning::rlMaxDnsClNCacheErrEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal number of DNS client negative cache entries.
.1.3.6.1.4.1.89.29.18.5,RADLAN-Tuning::rlMaxDnsClNamesEntries,INTEGER,read-only,,current,,The current maximal number of DNS client static names entries.
.1.3.6.1.4.1.89.29.18.6,RADLAN-Tuning::rlMaxDnsClNamesEntriesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximal number of DNS client static names entries.
.1.3.6.1.4.1.89.29.19,RADLAN-Tuning::rlTuningParamsTable,,not-accessible,,current,,table to show tuning : limits curent and after reset values.
.1.3.6.1.4.1.89.29.19.1,RADLAN-Tuning::rlTuningParamsEntry,,not-accessible,IMPLIEDrlTuningParamsName,current,,Defines the contents of each line in the rlTuningParamsTable table.
.1.3.6.1.4.1.89.29.19.1.1,RADLAN-Tuning::rlTuningParamsName,OCTET,read-only,,current,,Index to the rlTuningParamsTable. name of current value Mib for this entry. 
.1.3.6.1.4.1.89.29.19.1.2,RADLAN-Tuning::rlTuningParamsCurrentValue,INTEGER,read-only,,current,, This variable current value used in this run by the system.
.1.3.6.1.4.1.89.29.19.1.3,RADLAN-Tuning::rlTuningParamsAfterResetValue,INTEGER,read-only,,current,, This variable value that will be used in next run by the system. i.e. the value will be effective after next reboot
.1.3.6.1.4.1.89.29.19.1.4,RADLAN-Tuning::rlTuningParamsDefaultValue,INTEGER,read-only,,current,, This variable value that is used by the system as default.
.1.3.6.1.4.1.89.29.19.1.5,RADLAN-Tuning::rlTuningParamsMinimalValue,INTEGER,read-only,,current,,This variable value indicate minimum value. this is the lower limit for editing the value after reset.
.1.3.6.1.4.1.89.29.19.1.6,RADLAN-Tuning::rlTuningParamsMaximalValue,INTEGER,read-only,,current,,This variable value indicate maximum value. This is the upper limit for editing the value after reset.
.1.3.6.1.4.1.89.29.20,RADLAN-Tuning::rlHostParamTable,,not-accessible,,current,,table to show tuning : limits curent and after reset values.
.1.3.6.1.4.1.89.29.20.1,RADLAN-Tuning::rlHostParamEntry,,not-accessible,IMPLIEDrlHostParamName,current,,Defines the contents of each line in the rlHostParamTable table.
.1.3.6.1.4.1.89.29.20.1.1,RADLAN-Tuning::rlHostParamName,OCTET,read-only,,current,,Index to the rlHostParamTable. name of current value Mib for this entry. 
.1.3.6.1.4.1.89.29.20.1.2,RADLAN-Tuning::rlHostParamValue,INTEGER,read-only,,current,, This variable current value used in this run by the system.
.1.3.6.1.4.1.89.29.21,RADLAN-Tuning::rlOspfTuning,,,,,,
.1.3.6.1.4.1.89.29.21.1,RADLAN-Tuning::rlMaxOspfInterfaces,INTEGER,read-only,,current,,The current maximum number of ospf interfaces.
.1.3.6.1.4.1.89.29.21.2,RADLAN-Tuning::rlMaxOspfInterfacesAfterReset,INTEGER,read-write,,current,,The future (after reset) maximum number of ospf interfaces.
.1.3.6.1.4.1.89.29.21.3,RADLAN-Tuning::rlMaxOspfAreas,INTEGER,read-only,,current,,The current maximum number of ospf areas.
.1.3.6.1.4.1.89.29.21.4,RADLAN-Tuning::rlMaxOspfAreasAfterReset,INTEGER,read-write,,current,,The future (after reset) maximum number of ospf areas.
.1.3.6.1.4.1.89.29.21.5,RADLAN-Tuning::rlMaxOspfNeighbors,INTEGER,read-only,,current,,The current maximum number of ospf neighbors.
.1.3.6.1.4.1.89.29.21.6,RADLAN-Tuning::rlMaxOspfNeighborsAfterReset,INTEGER,read-write,,current,,The future (after reset) maximum number of ospf neighbors.
.1.3.6.1.4.1.89.29.21.7,RADLAN-Tuning::rlMaxOspfAbrPerArea,INTEGER,read-only,,current,,The current maximum number of ABR in ospf area.
.1.3.6.1.4.1.89.29.21.8,RADLAN-Tuning::rlMaxOspfAbrPerAreaAfterReset,INTEGER,read-write,,current,,The future (after reset) maximum number of ABR in ospf area.
.1.3.6.1.4.1.89.29.21.9,RADLAN-Tuning::rlMaxOspfNetsInAs,INTEGER,read-only,,current,,The current maximum number of networks in AS.
.1.3.6.1.4.1.89.29.21.10,RADLAN-Tuning::rlMaxOspfNetsInAsAfterReset,INTEGER,read-write,,current,,The future (after reset) maximum number of networks in AS.
.1.3.6.1.4.1.89.35,RADLAN-MIB::rndApplications,,,,,,
.1.3.6.1.4.1.89.35.2,RADLAN-rndApplications::rndMidLevelManagement,,,,,,
.1.3.6.1.4.1.89.35.2.2,RADLAN-rndApplications::rndAlarmOptions,,,,,,
.1.3.6.1.4.1.89.35.2.2.1,RADLAN-rndApplications::rndAlarmEnabling,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether alarms should be issued to the high-level NMS 
.1.3.6.1.4.1.89.35.2.2.2,RADLAN-rndApplications::rndAlarmInterval,INTEGER,read-write,,current,,Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
.1.3.6.1.4.1.89.35.2.3,RADLAN-rndApplications::rndMonitoredElementsTable,,not-accessible,,current,,The table of monitored elements of the network
.1.3.6.1.4.1.89.35.2.3.1,RADLAN-rndApplications::rndMonitoredElementEntry,,not-accessible,rndMonitoredElementAddress,current,, The row definition for this table.
.1.3.6.1.4.1.89.35.2.3.1.1,RADLAN-rndApplications::rndMonitoredElementAddress,IpAddress,read-only,,current,,The IP address of the monitored element
.1.3.6.1.4.1.89.35.2.3.1.2,RADLAN-rndApplications::rndMonitoredElementCommunity,OCTET,read-write,,current,,The community of the monitored element
.1.3.6.1.4.1.89.35.2.3.1.3,RADLAN-rndApplications::rndMonitoredElementLabel,OCTET,read-write,,current,,The label assigned by the network manager to the monitored element
.1.3.6.1.4.1.89.35.2.3.1.4,RADLAN-rndApplications::rndDefaultPollingInterval,INTEGER,read-write,,current,,The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
.1.3.6.1.4.1.89.35.2.3.1.5,RADLAN-rndApplications::rndDefaultLogFile,OCTET,read-write,,current,,The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
.1.3.6.1.4.1.89.35.2.3.1.6,RADLAN-rndApplications::rndMonitoredElementStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to manage the monitored elements table and indicates the current monitoring status of an element.
.1.3.6.1.4.1.89.35.2.4,RADLAN-rndApplications::rndMonitoringTable,,not-accessible,,current,,The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. 
.1.3.6.1.4.1.89.35.2.4.1,RADLAN-rndApplications::rndMonitoringEntry,,not-accessible,rndMonitoredElement:IMPLIEDrndMonitoredObjectInstanceLabel,current,, The row definition for this table.
.1.3.6.1.4.1.89.35.2.4.1.1,RADLAN-rndApplications::rndMonitoredElement,OCTET,read-only,,current,,A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
.1.3.6.1.4.1.89.35.2.4.1.2,RADLAN-rndApplications::rndMonitoredObjectInstanceLabel,OCTET,read-only,,current,,The label assigned by the network manager to the monitored object instance
.1.3.6.1.4.1.89.35.2.4.1.3,RADLAN-rndApplications::rndMonitoredObjectName,OCTET,read-write,,current,,The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the <MIB module name> : <object type name> format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
.1.3.6.1.4.1.89.35.2.4.1.4,RADLAN-rndApplications::rndMonitoredObjectIdentifier,OBJECT,read-write,,current,,The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
.1.3.6.1.4.1.89.35.2.4.1.5,RADLAN-rndApplications::rndMonitoredObjectInstance,OBJECT,read-write,,current,,The instance identifier (key) of the monitored object instance.
.1.3.6.1.4.1.89.35.2.4.1.6,RADLAN-rndApplications::rndMonitoredObjectSyntax,INTEGER,read-write,,current,integer(1):octet-string(2):ip-address(3):object-identifier(4),The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value
.1.3.6.1.4.1.89.35.2.4.1.7,RADLAN-rndApplications::rndMonitoringInterval,INTEGER,read-write,,current,,The period of time between two consecutive retrievals of the monitored object instance's value.
.1.3.6.1.4.1.89.35.2.4.1.8,RADLAN-rndApplications::rndAlarmMaxTreshold,INTEGER,read-write,,current,,The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
.1.3.6.1.4.1.89.35.2.4.1.9,RADLAN-rndApplications::rndAlarmMinTreshold,INTEGER,read-write,,current,,If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
.1.3.6.1.4.1.89.35.2.4.1.10,RADLAN-rndApplications::rndMonitoringLogfile,OCTET,read-write,,current,,The entire path of the file in which the results of the monitoring of this object instance should be recorded.
.1.3.6.1.4.1.89.35.2.4.1.11,RADLAN-rndApplications::rndMonitoringEntryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
.1.3.6.1.4.1.89.35.2.4.1.12,RADLAN-rndApplications::rndMonitoredIntegerInstance,INTEGER,read-write,,current,,
.1.3.6.1.4.1.89.35.2.5,RADLAN-rndApplications::rndMibFilesTable,,not-accessible,,current,,The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. 
.1.3.6.1.4.1.89.35.2.5.1,RADLAN-rndApplications::rndMibFileEntry,,not-accessible,rndMibFileIndex,current,, The row definition for this table.
.1.3.6.1.4.1.89.35.2.5.1.1,RADLAN-rndApplications::rndMibFileIndex,INTEGER,read-only,,current,,The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
.1.3.6.1.4.1.89.35.2.5.1.2,RADLAN-rndApplications::rndMibFilePath,OCTET,read-write,,current,,The path of the MIB file in the MIB file server.
.1.3.6.1.4.1.89.35.2.5.1.3,RADLAN-rndApplications::rndMibFileRefresh,INTEGER,read-write,,current,no(1):yes(2),Indicates if the file should be fetched after setting this entry from the MIB file server.
.1.3.6.1.4.1.89.35.2.5.1.4,RADLAN-rndApplications::rndMibFileEntryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to manage the MIB files table.
.1.3.6.1.4.1.89.35.2.6,RADLAN-rndApplications::rndHardwareConfiguration,INTEGER,read-write,,current,true(1):false(2),Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
.1.3.6.1.4.1.89.35.2.7,RADLAN-rndApplications::rndEraseSimulatedConfiguration,INTEGER,read-write,,current,eraseSimulatedConfiguration(1):simulatedConfigurationPresent(2):simulatedConfigurationErased(3),eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration.
.1.3.6.1.4.1.89.35.2.8,RADLAN-rndApplications::rndDeleteValuesTable,,not-accessible,,current,,This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
.1.3.6.1.4.1.89.35.2.8.1,RADLAN-rndApplications::rndDeleteValuesEntry,,not-accessible,IMPLIEDrndRowStatusVariableName,current,, The row definition for the rndDeleteValuesTable table.
.1.3.6.1.4.1.89.35.2.8.1.1,RADLAN-rndApplications::rndRowStatusVariableName,OCTET,read-write,,current,,The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
.1.3.6.1.4.1.89.35.2.8.1.2,RADLAN-rndApplications::rndRowStatusObjectId,OBJECT,read-write,,current,,The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
.1.3.6.1.4.1.89.35.2.8.1.3,RADLAN-rndApplications::rndRowDeleteValue,INTEGER,read-write,,current,,The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
.1.3.6.1.4.1.89.35.2.8.1.4,RADLAN-rndApplications::rndDeleteValueEntryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to delete an entry from this table.
.1.3.6.1.4.1.89.35.2.9,RADLAN-rndApplications::snmpTesting,,,,,,
.1.3.6.1.4.1.89.35.2.9.1,RADLAN-rndApplications::rndSimulatedVariablesTable,,not-accessible,,current,,This table indicates which MIB variables are simulated.
.1.3.6.1.4.1.89.35.2.9.1.1,RADLAN-rndApplications::rndSimulatedVariablesEntry,,not-accessible,rndSimulatedVariableEntryIndex,current,, The row definition for the rndSimulatedVariablesTable table.
.1.3.6.1.4.1.89.35.2.9.1.1.1,RADLAN-rndApplications::rndSimulatedVariableEntryIndex,INTEGER,read-only,,current,,The index entry.
.1.3.6.1.4.1.89.35.2.9.1.1.2,RADLAN-rndApplications::rndSimulatedVariableObjectId,OBJECT,read-write,,current,,The object id of the simulated variable. If the simulated variable belongs to a table entry, the entire entry is henceforth supported.
.1.3.6.1.4.1.89.35.2.9.1.1.3,RADLAN-rndApplications::rndNotSupportedField,INTEGER,read-only,,current,,Variable for not supported simulation.
.1.3.6.1.4.1.89.35.2.9.1.1.4,RADLAN-rndApplications::rndSimulatedVariableEntryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to delete an entry from this table.
.1.3.6.1.4.1.89.35.2.9.2,RADLAN-rndApplications::rndSnmpTestPassword,INTEGER,read-write,,current,,This variable enables the user supplying the correct code to use the SNMP test feature.
.1.3.6.1.4.1.89.35.2.9.3,RADLAN-rndApplications::rndSnmpTests,INTEGER,read-write,,current,noSimulation(1):simulateSetFailure(2):simulateAppGet(3):simulateAppGetNext(4),This variable enables the authorized user to test various SNMP features.
.1.3.6.1.4.1.89.35.2.9.4,RADLAN-rndApplications::rndSimulateUndo,INTEGER,read-write,,current,,This variable enables the authorized user to test the SNMP UNDO feature.
.1.3.6.1.4.1.89.35.2.9.5,RADLAN-rndApplications::rlSnmpServTestRequest,INTEGER,read-write,,current,,This variable enables the authorized user to test the SNMP SERV package.
.1.3.6.1.4.1.89.35.2.9.6,RADLAN-rndApplications::rlSnmpServTestResponse,OCTET,read-only,,current,,This variable enables the authorized user to retrieve the results of a the SNMP SERV package test.
.1.3.6.1.4.1.89.35.2.9.7,RADLAN-rndApplications::rlSnmpServCreateTestPool,INTEGER,read-write,,current,create(1):no-create(2),This variable enables the authorized user to indicate that after its reset the device should create a buffer pool for SNMPServ process PDU testing.
.1.3.6.1.4.1.89.35.2.9.8,RADLAN-rndApplications::rlSnmpServITCbindClients,OBJECT,read-write,,current,,This variable enables the authorized user to to indicate that after its reset the device should create ITC clients for SnmpServ data requests clients. The semantics of this variable is as follows: subidentifier 2*n indicates whether the client n is synchronous(1) or asynchronous(2) subidentifier 2*n+1 indicates the number of simulatneous requests expected by client n.
.1.3.6.1.4.1.89.35.2.9.9,RADLAN-rndApplications::rlSnmpTestSimulatedVariables,,,,,,
.1.3.6.1.4.1.89.35.2.9.10,RADLAN-rndApplications::rlTstBasicRateTable,,not-accessible,,current,,Table for testing SNMP agent.
.1.3.6.1.4.1.89.35.2.9.10.1,RADLAN-rndApplications::rlTstBasicRateEntry,,not-accessible,ifIndex,current,,An entry in the rlTstBasicRateTable.
.1.3.6.1.4.1.89.35.2.9.10.1.1,RADLAN-rndApplications::rlTstBasicRateIfType,INTEGER,read-write,,current,isdns(75):isdnu(76),
.1.3.6.1.4.1.89.35.2.9.10.1.2,RADLAN-rndApplications::rlTstBasicRateLineTopology,INTEGER,read-write,,current,pointToPoint(1):pointToMultipoint(2),
.1.3.6.1.4.1.89.35.2.9.10.1.3,RADLAN-rndApplications::rlTstBasicRateIfMode,INTEGER,read-write,,current,te(1):nt(2),
.1.3.6.1.4.1.89.35.2.9.10.1.4,RADLAN-rndApplications::rlTstBasicRateSignalMode,INTEGER,read-write,,current,active(1):inactive(2),
.1.3.6.1.4.1.89.35.2.10,RADLAN-rndApplications::rlMibTree,,,,,,
.1.3.6.1.4.1.89.35.2.10.1,RADLAN-rndApplications::rlMibTreeTable,,not-accessible,,current,,This reflects the MIB tree of the device.
.1.3.6.1.4.1.89.35.2.10.1.1,RADLAN-rndApplications::rlMibTreeEntry,,not-accessible,rlMibTreeFather:rlMibTreeSonIndex,current,, Each row shows a tree relationsship in the MIB.
.1.3.6.1.4.1.89.35.2.10.1.1.1,RADLAN-rndApplications::rlMibTreeFather,OCTET,not-accessible,,current,, The father in a tree relation ship.
.1.3.6.1.4.1.89.35.2.10.1.1.2,RADLAN-rndApplications::rlMibTreeSonIndex,INTEGER,not-accessible,,current,, Running index for this table.
.1.3.6.1.4.1.89.35.2.10.1.1.3,RADLAN-rndApplications::rlMibTreeSon,OCTET,read-only,,current,, The son in a tree relation ship.
.1.3.6.1.4.1.89.35.2.10.1.1.4,RADLAN-rndApplications::rlMibTreeSonObjectId,OBJECT,read-only,,current,, The object identifier of the son in a tree relation ship.
.1.3.6.1.4.1.89.35.2.10.1.1.5,RADLAN-rndApplications::rlMibTreeGrandFather,OCTET,read-only,,current,, The grand father (i.e father's father) in a tree relation ship.
.1.3.6.1.4.1.89.35.4,RADLAN-rndApplications::rsPingMIB,,,,,,
.1.3.6.1.4.1.89.35.4.1,RADLAN-rndApplications::rsPingTable,,not-accessible,,current,,A table of ping request entries.
.1.3.6.1.4.1.89.35.4.1.1,RADLAN-rndApplications::rsPingEntry,,not-accessible,rsPingAddress,current,,A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
.1.3.6.1.4.1.89.35.4.1.1.1,RADLAN-rndApplications::rsPingAddress,IpAddress,read-write,,current,,The address of the device to be pinged. Once an instance of this object is created, its value can not be changed.
.1.3.6.1.4.1.89.35.4.1.1.2,RADLAN-rndApplications::rsPingPacketCount,INTEGER,read-write,,current,,Specifies the number of ping packets to send to the target in this sequence.
.1.3.6.1.4.1.89.35.4.1.1.3,RADLAN-rndApplications::rsPingPacketSize,INTEGER,read-write,,current,,Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent.
.1.3.6.1.4.1.89.35.4.1.1.4,RADLAN-rndApplications::rsPingPacketTimeout,INTEGER,read-write,,current,,Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped.'
.1.3.6.1.4.1.89.35.4.1.1.5,RADLAN-rndApplications::rsPingDelay,INTEGER,read-write,,current,,Specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling.
.1.3.6.1.4.1.89.35.4.1.1.6,RADLAN-rndApplications::rsPingTrapOnCompletion,INTEGER,read-write,,current,true(1):false(2),Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable.
.1.3.6.1.4.1.89.35.4.1.1.7,RADLAN-rndApplications::rsPingSentPackets,Counter32,read-only,,current,,The number of ping packets that have been sent to the target in this sequence.
.1.3.6.1.4.1.89.35.4.1.1.8,RADLAN-rndApplications::rsPingReceivedPackets,Counter32,read-only,,current,,The number of ping packets that have been received from the target in this sequence.
.1.3.6.1.4.1.89.35.4.1.1.9,RADLAN-rndApplications::rsPingMinReturnTime,INTEGER,read-only,,current,,The minimum round trip time of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
.1.3.6.1.4.1.89.35.4.1.1.10,RADLAN-rndApplications::rsPingAvgReturnTime,INTEGER,read-only,,current,,The average round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
.1.3.6.1.4.1.89.35.4.1.1.11,RADLAN-rndApplications::rsPingMaxReturnTime,INTEGER,read-only,,current,,The maximum round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
.1.3.6.1.4.1.89.35.4.1.1.12,RADLAN-rndApplications::rsPingCompletionStatus,INTEGER,read-only,,current,ok(1):timeout(2):net-unreachable(3):host-unreachable(4):protocol-unreachable(5):time-to-live-exceeded(6):reassembly-time-exceeded(7):unable-to-send(8):bad-reply-data(9):incomplete(10),If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data.
.1.3.6.1.4.1.89.35.4.1.1.13,RADLAN-rndApplications::rsPingTimeStamp,OCTET,read-only,,current,,The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss
.1.3.6.1.4.1.89.35.4.1.1.14,RADLAN-rndApplications::rsPingEntryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.89.35.5,RADLAN-rndApplications::rsPowerSupplyRedundacy,,,,,,
.1.3.6.1.4.1.89.35.5.1,RADLAN-rndApplications::rsPowerSupplyRedundacyTable,,not-accessible,,current,,The power supply redundancy table.
.1.3.6.1.4.1.89.35.5.1.1,RADLAN-rndApplications::rsPowerSupplyRedundacyEntry,,not-accessible,rsPowerSupplyRedundacyReNumber,current,,The status of power supply redundancy for this table.
.1.3.6.1.4.1.89.35.5.1.1.1,RADLAN-rndApplications::rsPowerSupplyRedundacyReNumber,INTEGER,read-only,,current,,This number identifies the module backed up by power supply redundancy in the stack.
.1.3.6.1.4.1.89.35.5.1.1.2,RADLAN-rndApplications::rsPowerSupplyRedundacyStatus,INTEGER,read-only,,current,notExist(1):existButNotWorking(2):bothWorking(3):internalOnlyWorking(4):externalOnlyWorking(5),The status of a power supply redundancy of the entry.
.1.3.6.1.4.1.89.35.6,RADLAN-rndApplications::rsNvram,,,,,,
.1.3.6.1.4.1.89.35.6.1,RADLAN-rndApplications::rsEraseNvramAfterReset,OCTET,read-write,,current,,The name of NVRAM application that will be erased after reset or ALL if all NVRAM should be erased.
.1.3.6.1.4.1.89.35.6.2,RADLAN-rndApplications::rsNvramApplTable,,not-accessible,,current,,The NVRAM application table.
.1.3.6.1.4.1.89.35.6.2.1,RADLAN-rndApplications::rsNvramApplEntry,,not-accessible,rsNvramApplIndex,current,,The status of NVRAM application table.
.1.3.6.1.4.1.89.35.6.2.1.1,RADLAN-rndApplications::rsNvramApplIndex,INTEGER,read-only,,current,,The index of NVRAM application table.
.1.3.6.1.4.1.89.35.6.2.1.2,RADLAN-rndApplications::rsNvramApplName,OCTET,read-only,,current,,The name of application used NVRAM.
.1.3.6.1.4.1.89.38,RADLAN-DHCP-MIB::rsDHCP,,,,,,The private MIB module definition for DHCP server support.
.1.3.6.1.4.1.89.38.14,RADLAN-DHCP-MIB::rsDhcpMibVersion,INTEGER,read-write,,current,,DHCP MIB's version, the current version is 4.
.1.3.6.1.4.1.89.38.25,RADLAN-DHCP-MIB::rlDhcpRelayEnable,INTEGER,read-write,,current,true(1):false(2),Enable or disable the use of the DHCP relay.
.1.3.6.1.4.1.89.38.26,RADLAN-DHCP-MIB::rlDhcpRelayExists,INTEGER,read-only,,current,true(1):false(2),This variable shows whether the device can function as a DHCP Relay Agent.
.1.3.6.1.4.1.89.38.27,RADLAN-DHCP-MIB::rlDhcpRelayNextServerTable,,not-accessible,,current,,The DHCP Relay Next Servers configuration Table
.1.3.6.1.4.1.89.38.27.1,RADLAN-DHCP-MIB::rlDhcpRelayNextServerEntry,,not-accessible,rlDhcpRelayNextServerIpAddr,current,,The row definition for this table. DHCP requests are relayed to the specified next server according to their threshold values.
.1.3.6.1.4.1.89.38.27.1.1,RADLAN-DHCP-MIB::rlDhcpRelayNextServerIpAddr,IpAddress,read-only,,current,,The IPAddress of the next configuration server. DHCP Server may act as a DHCP relay if this parameter is not equal to 0.0.0.0.
.1.3.6.1.4.1.89.38.27.1.2,RADLAN-DHCP-MIB::rlDhcpRelayNextServerSecThreshold,Unsigned32,read-write,,current,,DHCP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local DHCP Servers to answer first.
.1.3.6.1.4.1.89.38.27.1.3,RADLAN-DHCP-MIB::rlDhcpRelayNextServerRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the validity or invalidity of the entry. Setting it to 'destroy' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.89.38.30,RADLAN-DHCP-MIB::rlDhcpSrvEnable,INTEGER,read-write,,current,true(1):false(2),Enable or Disable the use of the DHCP Server.
.1.3.6.1.4.1.89.38.31,RADLAN-DHCP-MIB::rlDhcpSrvExists,INTEGER,read-only,,current,true(1):false(2),This variable shows whether the device can function as a DHCP Server.
.1.3.6.1.4.1.89.38.32,RADLAN-DHCP-MIB::rlDhcpSrvDbLocation,INTEGER,read-only,,current,nvram(1):flash(2),Describes where DHCP Server database is stored.
.1.3.6.1.4.1.89.38.33,RADLAN-DHCP-MIB::rlDhcpSrvMaxNumOfClients,Unsigned32,read-only,,current,,This variable shows maximum number of clients that can be supported by DHCP Server dynamic allocation.
.1.3.6.1.4.1.89.38.34,RADLAN-DHCP-MIB::rlDhcpSrvDbNumOfActiveEntries,Unsigned32,read-only,,current,,This variable shows number of active entries stored in database.
.1.3.6.1.4.1.89.38.35,RADLAN-DHCP-MIB::rlDhcpSrvDbErase,INTEGER,read-write,,current,true(1):false(2),The value is always false. Setting this variable to true causes erasing all entries in DHCP database.
.1.3.6.1.4.1.89.38.36,RADLAN-DHCP-MIB::rlDhcpSrvProbeEnable,INTEGER,read-write,,current,true(1):false(2),Enable or Disable the use of the DHCP probe before allocating an IP address.
.1.3.6.1.4.1.89.38.37,RADLAN-DHCP-MIB::rlDhcpSrvProbeTimeout,Unsigned32,read-write,,current,,Indicates the peiod of time in milliseconds the DHCP probe will wait before issuing a new trial or deciding that no other device on the network has the IP address which DHCP considers allocating.
.1.3.6.1.4.1.89.38.38,RADLAN-DHCP-MIB::rlDhcpSrvProbeRetries,Unsigned32,read-write,,current,,Indicates how many times DHCP will probe before deciding that no other device on the network has the IP address which DHCP considers allocating.
.1.3.6.1.4.1.89.38.45,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrTable,,not-accessible,,current,,Table of IP Addresses allocated by DHCP Server by static and dynamic allocations.
.1.3.6.1.4.1.89.38.45.1,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrEntry,,not-accessible,rlDhcpSrvIpAddrIpAddr,current,,The row definition for this table. Parameters of DHCP allocated IP Addresses table.
.1.3.6.1.4.1.89.38.45.1.1,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrIpAddr,IpAddress,read-write,,current,,The IP address that was allocated by DHCP Server.
.1.3.6.1.4.1.89.38.45.1.2,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrIpNetMask,IpAddress,read-write,,current,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.4.1.89.38.45.1.3,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrIdentifier,OCTET,read-write,,current,,Unique Identifier for client. Either physical address or DHCP Client Identifier.
.1.3.6.1.4.1.89.38.45.1.4,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrIdentifierType,INTEGER,read-write,,current,physAddr(1):clientId(2),Identifier Type. Either physical address or DHCP Client Identifier.
.1.3.6.1.4.1.89.38.45.1.5,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrClnHostName,OCTET,read-write,,current,,Client Host Name. DHCP Server will use it to update DNS Server. Must be unique per client.
.1.3.6.1.4.1.89.38.45.1.6,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrMechanism,INTEGER,read-write,,current,manual(1):automatic(2):dynamic(3),Mechanism of allocation IP Address by DHCP Server. The only value that can be set by user is manual.
.1.3.6.1.4.1.89.38.45.1.7,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrAgeTime,Unsigned32,read-only,,current,,Age time of the IP Address.
.1.3.6.1.4.1.89.38.45.1.8,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrPoolName,OCTET,read-write,,current,,Ip address pool name. A unique name for host pool static allocation, or network pool name in case of dynamic allocation.
.1.3.6.1.4.1.89.38.45.1.9,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrConfParamsName,OCTET,read-write,,current,,This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table.
.1.3.6.1.4.1.89.38.45.1.10,RADLAN-DHCP-MIB::rlDhcpSrvIpAddrRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.38.46,RADLAN-DHCP-MIB::rlDhcpSrvDynamicTable,,not-accessible,,current,,The DHCP Dynamic Server's configuration Table
.1.3.6.1.4.1.89.38.46.1,RADLAN-DHCP-MIB::rlDhcpSrvDynamicEntry,,not-accessible,rlDhcpSrvDynamicPoolName,current,,The row definition for this table. Parameters sent in as a DHCP Reply to DHCP Request with specified indices
.1.3.6.1.4.1.89.38.46.1.1,RADLAN-DHCP-MIB::rlDhcpSrvDynamicPoolName,OCTET,read-write,,current,,The name of DHCP dynamic addresses pool.
.1.3.6.1.4.1.89.38.46.1.2,RADLAN-DHCP-MIB::rlDhcpSrvDynamicIpAddrFrom,IpAddress,read-write,,current,,The first IP address allocated in this row.
.1.3.6.1.4.1.89.38.46.1.3,RADLAN-DHCP-MIB::rlDhcpSrvDynamicIpAddrTo,IpAddress,read-write,,current,,The last IP address allocated in this row.
.1.3.6.1.4.1.89.38.46.1.4,RADLAN-DHCP-MIB::rlDhcpSrvDynamicIpNetMask,IpAddress,read-write,,current,,The subnet mask associated with the IP addresses of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.4.1.89.38.46.1.5,RADLAN-DHCP-MIB::rlDhcpSrvDynamicLeaseTime,Unsigned32,read-write,,current,,Maximum lease-time in seconds granted to a requesting DHCP client. For automatic allocation use 0xFFFFFFFF. To exclude addresses from allocation mechanism, set this value to 0.
.1.3.6.1.4.1.89.38.46.1.6,RADLAN-DHCP-MIB::rlDhcpSrvDynamicProbeEnable,INTEGER,read-write,,current,true(1):false(2),Enable or Disable the use of the DHCP probe before allocating the address.
.1.3.6.1.4.1.89.38.46.1.7,RADLAN-DHCP-MIB::rlDhcpSrvDynamicTotalNumOfAddr,Unsigned32,read-only,,current,,Total number of addresses in space.
.1.3.6.1.4.1.89.38.46.1.8,RADLAN-DHCP-MIB::rlDhcpSrvDynamicFreeNumOfAddr,Unsigned32,read-only,,current,,Free number of addresses in space.
.1.3.6.1.4.1.89.38.46.1.9,RADLAN-DHCP-MIB::rlDhcpSrvDynamicConfParamsName,OCTET,read-write,,current,,This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table.
.1.3.6.1.4.1.89.38.46.1.10,RADLAN-DHCP-MIB::rlDhcpSrvDynamicRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.38.47,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsTable,,not-accessible,,current,,The DHCP Configuration Parameters Table
.1.3.6.1.4.1.89.38.47.1,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsEntry,,not-accessible,rlDhcpSrvConfParamsName,current,,The row definition for this table. Each entry corresponds to one specific parameters set.
.1.3.6.1.4.1.89.38.47.1.1,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsName,OCTET,read-write,,current,,This value is a unique index for the entry in the rlDhcpSrvConfParamsTable.
.1.3.6.1.4.1.89.38.47.1.2,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsNextServerIp,IpAddress,read-write,,current,,The IP of next server for client to use in configuration process.
.1.3.6.1.4.1.89.38.47.1.3,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsNextServerName,OCTET,read-write,,current,,The mame of next server for client to use in configuration process.
.1.3.6.1.4.1.89.38.47.1.4,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsBootfileName,OCTET,read-write,,current,,Name of file for client to request from next server.
.1.3.6.1.4.1.89.38.47.1.5,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsRoutersList,OCTET,read-write,,current,,The value of option code 3, which defines default routers list. Each IP address is represented in dotted decimal notation format with ';' between them.
.1.3.6.1.4.1.89.38.47.1.6,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsTimeSrvList,OCTET,read-write,,current,,The value of option code 4, which defines time servers list. Each IP address is represented in dotted decimal notation format with ';' between them.
.1.3.6.1.4.1.89.38.47.1.7,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsDnsList,OCTET,read-write,,current,,The value of option code 6, which defines the list of DNSs. Each IP address is represented in dotted decimal notation format with ';' between them.
.1.3.6.1.4.1.89.38.47.1.8,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsDomainName,OCTET,read-write,,current,,The value option code 15, which defines the domain name..
.1.3.6.1.4.1.89.38.47.1.9,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsNetbiosNameList,OCTET,read-write,,current,,The value option code 44, which defines the list of NETBios Name Servers. Each IP address is represented in dotted decimal notation format with ';' between them.
.1.3.6.1.4.1.89.38.47.1.10,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsNetbiosNodeType,INTEGER,read-write,,current,b-node(1):p-node(2):m-node(4):h-node(8),The value option code 46, which defines the NETBios node type. The option will be added only if rlDhcpSrvConfParamsNetbiosNameList is not empty.
.1.3.6.1.4.1.89.38.47.1.11,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsCommunity,OCTET,read-write,,current,,The value of site-specific option 128, which defines Community. The option will be added only if rlDhcpSrvConfParamsNmsIp is set.
.1.3.6.1.4.1.89.38.47.1.12,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsNmsIp,IpAddress,read-write,,current,,The value of site-specific option 129, which defines IP of Network Manager.
.1.3.6.1.4.1.89.38.47.1.13,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsOptionsList,OCTET,read-write,,current,,The sequence of option segments. Each option segment is represented by a triplet <code/length/value>. The code defines the code of each supported option. The length defines the length of each supported option. The value defines the value of the supported option. If there is a number of elements in the value field, they are divided by ','. Each element of type IP address in value field is represented in dotted decimal notation format.
.1.3.6.1.4.1.89.38.47.1.14,RADLAN-DHCP-MIB::rlDhcpSrvConfParamsRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.42,RADLAN-MIB::rsUDP,,,,,,
.1.3.6.1.4.1.89.42.1,RADLAN-UDP::rsUdpRelayTable,,not-accessible,,current,,This table contains the udp relay configuration per port.
.1.3.6.1.4.1.89.42.1.1,RADLAN-UDP::rsUdpRelayEntry,,not-accessible,rsUdpRelayDstPort:rsUdpRelaySrcIpInf:rsUdpRelayDstIpAddr,current,, The row definition for this table.
.1.3.6.1.4.1.89.42.1.1.1,RADLAN-UDP::rsUdpRelayDstPort,INTEGER,read-only,,current,,The UDP port number in the UDP message header.
.1.3.6.1.4.1.89.42.1.1.2,RADLAN-UDP::rsUdpRelaySrcIpInf,IpAddress,read-only,,current,,The source interface IP that receives UDP message. 255.255.255.255 from all IP interface. 0.0.0.0 - 0.255.255.255 and 127.0.0.0 - 127.255.255.255 not relevant addresses.
.1.3.6.1.4.1.89.42.1.1.3,RADLAN-UDP::rsUdpRelayDstIpAddr,IpAddress,read-only,,current,,The destination IP address the UDP message will be forward. 0.0.0.0 does not forward, 255.255.255.255 broadcasts to all addresses.
.1.3.6.1.4.1.89.42.1.1.4,RADLAN-UDP::rsUdpRelayStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete an entry from this table.
.1.3.6.1.4.1.89.42.1.1.5,RADLAN-UDP::rsUdpRelayUserInfo,INTEGER,read-write,,current,,The information used for implementation purposes
.1.3.6.1.4.1.89.42.2,RADLAN-UDP::rsUdpRelayMibVersion,INTEGER,read-only,,current,,Mib version. The current version is 1.
.1.3.6.1.4.1.89.43,RADLAN-MIB::swInterfaces,,,,,,
.1.3.6.1.4.1.89.43.1,RADLAN-rlInterfaces::swIfTable,,not-accessible,,current,,Switch media specific information and configuration of the device interfaces.
.1.3.6.1.4.1.89.43.1.1,RADLAN-rlInterfaces::swIfEntry,,not-accessible,swIfIndex,current,,Defines the contents of each line in the swIfTable table.
.1.3.6.1.4.1.89.43.1.1.1,RADLAN-rlInterfaces::swIfIndex,INTEGER,read-only,,current,,Index to the swIfTable. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIB II).
.1.3.6.1.4.1.89.43.1.1.2,RADLAN-rlInterfaces::swIfPhysAddressType,INTEGER,read-write,,current,default(1):reserve(2), This variable indicates whether the physical address assigned to this interface should be the default one or be chosen from the set of reserved physical addresses of the device.
.1.3.6.1.4.1.89.43.1.1.3,RADLAN-rlInterfaces::swIfDuplexAdminMode,INTEGER,read-write,,current,none(1):half(2):full(3),This variable specifies whether this interface should operate in half duplex or full duplex mode. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 'none' is returned if a value of the variable hasn't been set.
.1.3.6.1.4.1.89.43.1.1.4,RADLAN-rlInterfaces::swIfDuplexOperMode,INTEGER,read-only,,current,half(1):full(2):hybrid(3):unknown(4), This variable indicates whether this interface operates in half duplex or full duplex mode. This variable can have the values hybrid or unknown only for a trunk. unknown - only if trunk operative status is not present.
.1.3.6.1.4.1.89.43.1.1.5,RADLAN-rlInterfaces::swIfBackPressureMode,INTEGER,read-write,,current,enable(1):disable(2),This variable indicates whether this interface activates back pressure when congested.
.1.3.6.1.4.1.89.43.1.1.6,RADLAN-rlInterfaces::swIfTaggedMode,INTEGER,read-write,,current,enable(1):disable(2),If enable, this interface operates in tagged mode, i.e all frames sent out through this interface will have the 802.1Q header. If disabled the frames will not be tagged.
.1.3.6.1.4.1.89.43.1.1.7,RADLAN-rlInterfaces::swIfTransceiverType,INTEGER,read-only,,current,regular(1):fiberOptics(2):comboRegular(3):comboFiberOptics(4), This variable indicates the transceiver type of this interface.
.1.3.6.1.4.1.89.43.1.1.8,RADLAN-rlInterfaces::swIfLockAdminStatus,INTEGER,read-write,,current,locked(1):unlocked(2),This variable indicates whether this interface should operate in locked or unlocked mode. In unlocked mode the device learns all MAC addresses from this port and forwards all frames arrived at this port. In locked mode no new MAC addresses are learned and only frames with known source MAC addresses are forwarded.
.1.3.6.1.4.1.89.43.1.1.9,RADLAN-rlInterfaces::swIfLockOperStatus,INTEGER,read-only,,current,locked(1):unlocked(2),This variable defines whether this interface operates in locked or unlocked mode. It is locked in each of the following two cases: 1) if swLockAdminStatus is set to locked 2) no IP/IPX interface is defined over this interface and no VLAN contains this interface. In unlocked mode the device learns all MAC addresses from this port and forwards all frames arrived at this port. In locked mode no new MAC addresses are learned and only frames with known source MAC addresses are forwarded.
.1.3.6.1.4.1.89.43.1.1.10,RADLAN-rlInterfaces::swIfType,INTEGER,read-only,,current,eth10M(1):eth100M(2):eth1000M(3):eth10G(4):unknown(5), This variable specifies the type of interface.
.1.3.6.1.4.1.89.43.1.1.11,RADLAN-rlInterfaces::swIfDefaultTag,INTEGER,read-only,,current,,This variable specifies the default VLAN tag which will be attached to outgoing frames if swIfTaggedMode for this interface is enabled.
.1.3.6.1.4.1.89.43.1.1.12,RADLAN-rlInterfaces::swIfDefaultPriority,INTEGER,read-write,,current,, This variable specifies the default port priority.
.1.3.6.1.4.1.89.43.1.1.13,RADLAN-rlInterfaces::swIfStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete an entry from this table.
.1.3.6.1.4.1.89.43.1.1.14,RADLAN-rlInterfaces::swIfFlowControlMode,INTEGER,read-write,,current,on(1):off(2):autoNegotiation(3):enabledRx(4):enabledTx(5),on - Flow control will be enabled on this interface according to the IEEE 802.3x standard. off - Flow control is disabled. autoNegotiation - Flow control will be enabled or disabled on this interface. If enabled, it will operate as specified by the IEEE 802.3x standard. enabledRx - Flow control will be enabled on this interface for recieved frames. enabledTx - Flow control will be enabled on this interface for transmitted frames. An attempt to set this object to 'enabledRx(4)' or 'enabledTx(5)' will fail on interfaces that do not support operation at greater than 100 Mb/s. In any case, flow control can work only if swIfDuplexOperMode is full.
.1.3.6.1.4.1.89.43.1.1.15,RADLAN-rlInterfaces::swIfSpeedAdminMode,INTEGER,read-write,,current,,This variable specifies the required speed of this interface in bits per second. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set.
.1.3.6.1.4.1.89.43.1.1.16,RADLAN-rlInterfaces::swIfSpeedDuplexAutoNegotiation,INTEGER,read-write,,current,enabled(1):disabled(2),If enabled the speed and duplex mode will be set by the device through the autonegotiation process. Otherwise these characteristics will be set according to the values of swIfSpeedAdminMode and swIfSpeedDuplexAutoNegotiation.
.1.3.6.1.4.1.89.43.1.1.17,RADLAN-rlInterfaces::swIfOperFlowControlMode,INTEGER,read-only,,current,on(1):off(2):enabledRx(3):enabledTx(4),on - Flow control is enabled on this interface according to the IEEE 802.3x standard. off - Flow control is disabled. enabledRx - Flow control is enabled on this interface for recieved frames. enabledTx - Flow control is enabled on this interface for transmitted frames.
.1.3.6.1.4.1.89.43.1.1.18,RADLAN-rlInterfaces::swIfOperSpeedDuplexAutoNegotiation,INTEGER,read-only,,current,enabled(1):disabled(2):hybrid(3):unknown(4),If enabled the speed and duplex are determined by the device through the autonegotiation process. If disabled these characteristics are determined according to the values of swIfSpeedAdminMode and swIfDuplexAdminMode. hybrid - only for a trunk. unknown - only for ports that there operative status is not present.
.1.3.6.1.4.1.89.43.1.1.19,RADLAN-rlInterfaces::swIfOperBackPressureMode,INTEGER,read-only,,current,enable(1):disable(2):hybrid(3):unknown(4),This variable indicates the operative back pressure mode of this interface.
.1.3.6.1.4.1.89.43.1.1.20,RADLAN-rlInterfaces::swIfAdminLockAction,INTEGER,read-write,,current,discard(1):forwardNormal(2):discardDisable(3),This variable indicates which action this interface should be taken in locked mode and therefore relevant only in locked mode. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port.
.1.3.6.1.4.1.89.43.1.1.21,RADLAN-rlInterfaces::swIfOperLockAction,INTEGER,read-only,,current,discard(1):forwardNormal(2):discardDisable(3),This variable indicates which action this interface actually takes in locked mode and therefore relevant only in locked mode. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port.
.1.3.6.1.4.1.89.43.1.1.22,RADLAN-rlInterfaces::swIfAdminLockTrapEnable,INTEGER,read-write,,current,true(1):false(2),This variable indicates whether to create a SNMP trap in the locked mode.
.1.3.6.1.4.1.89.43.1.1.23,RADLAN-rlInterfaces::swIfOperLockTrapEnable,INTEGER,read-only,,current,true(1):false(2),This variable indicates whether a SNMP trap can be created in the locked mode.
.1.3.6.1.4.1.89.43.1.1.24,RADLAN-rlInterfaces::swIfOperSuspendedStatus,INTEGER,read-only,,current,true(1):false(2),This variable indicates whether the port is suspended or not due to some feature. After reboot this value is false
.1.3.6.1.4.1.89.43.1.1.25,RADLAN-rlInterfaces::swIfLockOperTrapCount,INTEGER,read-only,,current,,This variable indicates the trap counter status per ifIndex (i.e. number of received packets since the last trap sent due to a packet which was received on this ifIndex). It's relevant only in locked mode while trap is enabled.
.1.3.6.1.4.1.89.43.1.1.26,RADLAN-rlInterfaces::swIfLockAdminTrapFrequency,INTEGER,read-write,,current,,This variable indicates the minimal frequency (in seconds) of sending a trap per ifIndex. It's relevant only in locked mode and in trap enabled.
.1.3.6.1.4.1.89.43.1.1.27,RADLAN-rlInterfaces::swIfReActivate,INTEGER,read-write,,current,true(1):false(2),This variable reactivates (enables) an ifIndex (which was suspended)
.1.3.6.1.4.1.89.43.1.1.28,RADLAN-rlInterfaces::swIfAdminMdix,INTEGER,read-write,,current,cross(1):normal(2):auto(3),The configuration is on a physical port, not include trunks. cross - The interface should force crossover. normal - The interface should not force crossover. auto - Auto mdix is enabled on the interface.
.1.3.6.1.4.1.89.43.1.1.29,RADLAN-rlInterfaces::swIfOperMdix,INTEGER,read-only,,current,cross(1):normal(2):unknown(3),cross - The interface is in crossover mode. normal - The interface is not in crossover mode. unknown - Only for port that its operative status is not present or down.
.1.3.6.1.4.1.89.43.1.1.30,RADLAN-rlInterfaces::swIfHostMode,INTEGER,read-write,,current,single(1):multiple(2),This variable indicates the 802.1X host mode of a port. Relevant when the port's 802.1X control is auto
.1.3.6.1.4.1.89.43.1.1.31,RADLAN-rlInterfaces::swIfSingleHostViolationAdminAction,INTEGER,read-write,,current,discard(1):forwardNormal(2):discardDisable(3),This variable indicates which action this interface should take in single authorized. Possible actions: discard - every packet is dropped. forwardNormal - every packet is forwarded according to the DST address. discardDisable - drops the first packet and suspends the port.
.1.3.6.1.4.1.89.43.1.1.32,RADLAN-rlInterfaces::swIfSingleHostViolationOperAction,INTEGER,read-only,,current,discard(1):forwardNormal(2):discardDisable(3),This variable indicates which action this interface actually takes in single authorized. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port.
.1.3.6.1.4.1.89.43.1.1.33,RADLAN-rlInterfaces::swIfSingleHostViolationAdminTrapEnable,INTEGER,read-write,,current,true(1):false(2),This variable indicates whether to create a SNMP trap in single authorized.
.1.3.6.1.4.1.89.43.1.1.34,RADLAN-rlInterfaces::swIfSingleHostViolationOperTrapEnable,INTEGER,read-only,,current,true(1):false(2),This variable indicates whether a SNMP trap can be created in the single authorized.
.1.3.6.1.4.1.89.43.1.1.35,RADLAN-rlInterfaces::swIfSingleHostViolationOperTrapCount,INTEGER,read-only,,current,,This variable indicates the trap counter status per ifIndex (i.e. number of received packets since the last trap sent due to a packet which was received on this ifIndex). It's relevant only in single authorized while trap is enabled.
.1.3.6.1.4.1.89.43.1.1.36,RADLAN-rlInterfaces::swIfSingleHostViolationAdminTrapFrequency,INTEGER,read-write,,current,,This variable indicates the minimal frequency (in seconds) of sending a trap per ifIndex. It's relevant only in single authorized and in trap enabled.
.1.3.6.1.4.1.89.43.1.1.37,RADLAN-rlInterfaces::swIfLockLimitationMode,INTEGER,read-write,,current,disabled(1):dynamic(2),This variable indicates what is the learning limitation on the locked interface. Possible values: disabled - learning is stopped. The dynamic addresses associated with the port are not aged out or relearned on other port as long as the port is locked. dynamic - dynamic addresses can be learned up to the maximum dynamic addresses allowed on the port. Relearning and aging of the dynamic addresses are enabled. The learned addresses aren't kept after reset.
.1.3.6.1.4.1.89.43.1.1.38,RADLAN-rlInterfaces::swIfLockMaxMacAddresses,INTEGER,read-write,,current,,This variable defines the maximum number of dynamic addresses that can be asscoiated with the locked interface. It isn't relevant in disabled limitation mode.
.1.3.6.1.4.1.89.43.1.1.39,RADLAN-rlInterfaces::swIfLockMacAddressesCount,INTEGER,read-only,,current,,This variable indicates the actual number of dynamic addresses that can be asscoiated with the locked interface. It isn't relevant in disabled limitation mode.
.1.3.6.1.4.1.89.43.1.1.40,RADLAN-rlInterfaces::swIfAdminSpeedDuplexAutoNegotiationLocalCapabilities,BITS,read-write,,current,default(0):unknown(1):tenHalf(2):tenFull(3):fastHalf(4):fastFull(5):gigaHalf(6):gigaFull(7),Administrative auto negotiation capabilities of the interface that can be advertised when swIfSpeedDuplexAutoNegotiation is enabled. default bit means advertise all the port's capabilities according to its type.
.1.3.6.1.4.1.89.43.1.1.41,RADLAN-rlInterfaces::swIfOperSpeedDuplexAutoNegotiationLocalCapabilities,BITS,read-only,,current,default(0):unknown(1):tenHalf(2):tenFull(3):fastHalf(4):fastFull(5):gigaHalf(6):gigaFull(7),Operative auto negotiation capabilities of the remote link. unknown bit means that port operative status is not up.
.1.3.6.1.4.1.89.43.1.1.42,RADLAN-rlInterfaces::swIfSpeedDuplexNegotiationRemoteCapabilities,BITS,read-only,,current,default(0):unknown(1):tenHalf(2):tenFull(3):fastHalf(4):fastFull(5):gigaHalf(6):gigaFull(7),Operative auto negotiation capabilities of the remote link. unknown bit means that port operative status is not up, or auto negotiation process not complete, or remote link is not auto negotiation able.
.1.3.6.1.4.1.89.43.2,RADLAN-rlInterfaces::swIfMibVersion,INTEGER,read-only,,current,,The swIfTable Mib's version, the current version is 3.
.1.3.6.1.4.1.89.43.3,RADLAN-rlInterfaces::swIfPortLockSupport,INTEGER,read-only,,current,supported(1):notSupported(2),indicates if the locked port package is supported.
.1.3.6.1.4.1.89.43.4,RADLAN-rlInterfaces::swIfPortLockActionSupport,OCTET,read-only,,current,,indicates which port lock actions are supported: (bit 0 is the most significant bit) bit 0 - discard bit 1 - forwardNormal bit 2 - discardDisable
.1.3.6.1.4.1.89.43.5,RADLAN-rlInterfaces::swIfPortLockTrapSupport,OCTET,read-only,,current,,indicates with which port lock actions the trap option is supported (e.g. discard indicates that trap is supported only when the portlock action is discard): (bit 0 is the most significant bit) bit 0 - discard bit 1 - forwardNormal bit 2 - discardDisable
.1.3.6.1.4.1.89.43.6,RADLAN-rlInterfaces::swIfPortLockIfRangeTable,,not-accessible,,current,,Port lock interfaces range configuration
.1.3.6.1.4.1.89.43.6.1,RADLAN-rlInterfaces::swIfPortLockIfRangeEntry,,not-accessible,swIfPortLockIfRangeIndex,current,,Defines the contents of each line in the swIfPortLockIfRangeTable table.
.1.3.6.1.4.1.89.43.6.1.1,RADLAN-rlInterfaces::swIfPortLockIfRangeIndex,INTEGER,read-only,,current,,Index to the swIfPortLockIfRangeTable.
.1.3.6.1.4.1.89.43.6.1.2,RADLAN-rlInterfaces::swIfPortLockIfRange,OCTET,read-write,,current,,The set of interfaces to which the port lock parameters should be configured
.1.3.6.1.4.1.89.43.6.1.3,RADLAN-rlInterfaces::swIfPortLockIfRangeLockStatus,INTEGER,read-write,,current,locked(1):unlocked(2),This variable indicates whether the interfaces range should operate in locked or unlocked mode. In unlocked mode the device learns all MAC addresses from these interfaces and forwards all frames arrived at these interfaces. In locked mode no new MAC addresses are learned and only frames with known source MAC addresses are forwarded.
.1.3.6.1.4.1.89.43.6.1.4,RADLAN-rlInterfaces::swIfPortLockIfRangeAction,INTEGER,read-write,,current,discard(1):forwardNormal(2):discardDisable(3),This variable indicates which action for these interfaces should be take in locked mode and therefore relevant only in locked mode. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port.
.1.3.6.1.4.1.89.43.6.1.5,RADLAN-rlInterfaces::swIfPortLockIfRangeTrapEn,INTEGER,read-write,,current,true(1):false(2),This variable indicates whether to create a SNMP trap in the locked mode.
.1.3.6.1.4.1.89.43.6.1.6,RADLAN-rlInterfaces::swIfPortLockIfRangeTrapFreq,INTEGER,read-write,,current,,This variable indicates the minimal frequency (in seconds) of sending a trap for these interfaces. It's relevant only in locked mode and in trap enabled.
.1.3.6.1.4.1.89.46,RADLAN-MIB::rlIPmulticast,,,,,,
.1.3.6.1.4.1.89.46.1,RADLAN-rlIPMulticast-MIB::rlIpmRouterEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of IP Multicast routing on this router.
.1.3.6.1.4.1.89.46.2,RADLAN-rlIPMulticast-MIB::rlIgmp,,,,,,
.1.3.6.1.4.1.89.46.2.1,RADLAN-rlIPMulticast-MIB::rlIgmpMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.46.3,RADLAN-rlIPMulticast-MIB::rlPim,,,,,,
.1.3.6.1.4.1.89.46.3.2,RADLAN-rlIPMulticast-MIB::rlPimMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.46.3.7,RADLAN-rlIPMulticast-MIB::rlPimEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of PIM protocol on this router.
.1.3.6.1.4.1.89.46.4,RADLAN-rlIPMulticast-MIB::rlDvmrp,,,,,,
.1.3.6.1.4.1.89.46.5,RADLAN-rlIPMulticast-MIB::rlIgmpProxy,,,,,,
.1.3.6.1.4.1.89.46.5.1,RADLAN-rlIPMulticast-MIB::rlIgmpProxyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of IGMP Proxy on this router.
.1.3.6.1.4.1.89.46.6,RADLAN-rlIPMulticast-MIB::rlIgmpFilter,,,,,,
.1.3.6.1.4.1.89.46.6.1,RADLAN-rlIPMulticast-MIB::rlIgmpFilterEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of Igmp filter on this router.
.1.3.6.1.4.1.89.46.6.2,RADLAN-rlIPMulticast-MIB::rlIgmpFilterTable,,not-accessible,,current,,The (conceptual) table listing the IP multicast groups which are permited or denied from the particular interface.
.1.3.6.1.4.1.89.46.6.2.1,RADLAN-rlIPMulticast-MIB::rlIgmpFilterEntry,,not-accessible,rlIgmpFilterIfIndex:rlIgmpFilterAddressFrom:rlIgmpFilterAddressTo,current,,An entry (conceptual row) in the igmpFilterTable.
.1.3.6.1.4.1.89.46.6.2.1.1,RADLAN-rlIPMulticast-MIB::rlIgmpFilterIfIndex,Integer32,not-accessible,,current,,The interface for which this entry contains information for an IP multicast group address.
.1.3.6.1.4.1.89.46.6.2.1.2,RADLAN-rlIPMulticast-MIB::rlIgmpFilterAddressFrom,IpAddress,not-accessible,,current,,The first IP multicast group address for which this entry contains information.
.1.3.6.1.4.1.89.46.6.2.1.3,RADLAN-rlIPMulticast-MIB::rlIgmpFilterAddressTo,IpAddress,not-accessible,,current,,The last IP multicast group address for which this entry contains information.
.1.3.6.1.4.1.89.46.6.2.1.4,RADLAN-rlIPMulticast-MIB::rlIgmpFilterUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.4.1.89.46.6.2.1.5,RADLAN-rlIPMulticast-MIB::rlIgmpFilterStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.
.1.3.6.1.4.1.89.46.6.2.1.6,RADLAN-rlIPMulticast-MIB::rlIgmpFilterAction,INTEGER,read-write,,current,deny(1):permit(2), Filter action - permit/deny for the group received from the interface.
.1.3.6.1.4.1.89.46.7,RADLAN-rlIPMulticast-MIB::rlPimSM,,,,,,
.1.3.6.1.4.1.89.46.7.1,RADLAN-rlIPMulticast-MIB::rlPimSMEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of PIM SM on this router.
.1.3.6.1.4.1.89.46.7.2,RADLAN-rlIPMulticast-MIB::rlPimSMMibVersion,INTEGER,read-only,,current,,The Mib version , current version 2.
.1.3.6.1.4.1.89.46.7.4,RADLAN-rlIPMulticast-MIB::rlPimSMDREnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of PIM SM Designated Router on this router.
.1.3.6.1.4.1.89.46.7.5,RADLAN-rlIPMulticast-MIB::rlPimSMDirectedConnectedSourceEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of Directed Connected Source on this router. If disable, the router not work with direct connected sources.
.1.3.6.1.4.1.89.46.7.6,RADLAN-rlIPMulticast-MIB::rlPimSMRPEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of PIM SM Randevouz Point on this router.
.1.3.6.1.4.1.89.46.7.7,RADLAN-rlIPMulticast-MIB::rlPimSMSPTSwitchEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of PIM SM SPT Switch on this router. If disable ,the router will work only through the RPT
.1.3.6.1.4.1.89.46.7.8,RADLAN-rlIPMulticast-MIB::rlPimSmRPSetConfigurationType,INTEGER,read-write,,current,manual(1):bootstrap(2),Type of RP set configuration:manualy or through boot stap message .
.1.3.6.1.4.1.89.47,RADLAN-MIB::rlFFT,,,,,,
.1.3.6.1.4.1.89.47.1,RADLAN-rlFft::rlIpFFT,,,,,,
.1.3.6.1.4.1.89.47.1.1,RADLAN-rlFft::rlIpFftMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.47.1.2,RADLAN-rlFft::rlIpMaxFftNumber,INTEGER,read-only,,current,,The maximum number of IP FFTs.
.1.3.6.1.4.1.89.47.1.3,RADLAN-rlFft::rlIpFftDynamicSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether dynamic IP FFTs are supported.
.1.3.6.1.4.1.89.47.1.4,RADLAN-rlFft::rlIpFftSubnetSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether subtable per IP subnet is supported.
.1.3.6.1.4.1.89.47.1.5,RADLAN-rlFft::rlIpFftUnknownAddrMsgUsed,INTEGER,read-only,,current,used(1):unused(2),Specifies whether the 3SW uses the unknown address message.
.1.3.6.1.4.1.89.47.1.6,RADLAN-rlFft::rlIpFftAgingTimeSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether aging time is supported.
.1.3.6.1.4.1.89.47.1.7,RADLAN-rlFft::rlIpFftSrcAddrSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether an IP subtable per station contains source IP address.
.1.3.6.1.4.1.89.47.1.8,RADLAN-rlFft::rlIpFftAgingTimeout,INTEGER,read-write,,current,,The aging timeout in seconds.
.1.3.6.1.4.1.89.47.1.9,RADLAN-rlFft::rlIpFftRedBoundary,INTEGER,read-write,,current,,The red boundary in percents.
.1.3.6.1.4.1.89.47.1.10,RADLAN-rlFft::rlIpFftYellowBoundary,INTEGER,read-write,,current,,The yellow boundary in percents.
.1.3.6.1.4.1.89.47.1.12,RADLAN-rlFft::rlIpFftNumTable,,not-accessible,,current,,The (conceptual) table containing routes' numbers of the IP SFFTs and IP NFFTs. 
.1.3.6.1.4.1.89.47.1.12.1,RADLAN-rlFft::rlIpFftNumEntry,,not-accessible,rlIpFftNumIndex,current,,An entry (conceptual row) containing the containing routes' numbers of IP SFFT and IP NFFT 
.1.3.6.1.4.1.89.47.1.12.1.1,RADLAN-rlFft::rlIpFftNumIndex,INTEGER,read-only,,current,,The value of the index of the IP FFT. 
.1.3.6.1.4.1.89.47.1.12.1.2,RADLAN-rlFft::rlIpFftNumStnRoutesNumber,INTEGER,read-only,,current,,The number of routes that are contained in the IP SFFT. 
.1.3.6.1.4.1.89.47.1.12.1.3,RADLAN-rlFft::rlIpFftNumSubRoutesNumber,INTEGER,read-only,,current,,The number of routes that are contained in the IP NFFT. 
.1.3.6.1.4.1.89.47.1.13,RADLAN-rlFft::rlIpFftStnTable,,not-accessible,,current,,The (conceptual) table contains IP Fast Forwarding information per station for IP datagrams. 
.1.3.6.1.4.1.89.47.1.13.1,RADLAN-rlFft::rlIpFftStnEntry,,not-accessible,rlIpFftStnIndex:rlIpFftStnMrid:rlIpFftStnDstIpAddress,current,,An entry (conceptual row) contains the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
.1.3.6.1.4.1.89.47.1.13.1.1,RADLAN-rlFft::rlIpFftStnIndex,INTEGER,read-only,,current,,The value of the index of the IP FFT. 
.1.3.6.1.4.1.89.47.1.13.1.2,RADLAN-rlFft::rlIpFftStnMrid,INTEGER,read-only,,current,,The router's Instance Identifier in the SFFT. 
.1.3.6.1.4.1.89.47.1.13.1.3,RADLAN-rlFft::rlIpFftStnDstIpAddress,IpAddress,read-only,,current,,The IP destination address for which this entry contains IP forwarding information.
.1.3.6.1.4.1.89.47.1.13.1.4,RADLAN-rlFft::rlIpFftStnDstRouteIpMask,IpAddress,read-only,,current,,The IP destination mask for which this entry contains IP forwarding information.
.1.3.6.1.4.1.89.47.1.13.1.5,RADLAN-rlFft::rlIpFftStnDstIpAddrType,INTEGER,read-only,,current,local(1):remote(2),The IP destination address type. 
.1.3.6.1.4.1.89.47.1.13.1.6,RADLAN-rlFft::rlIpFftStnDstMacAddress,OCTET,read-only,,current,,The MAC destination address.
.1.3.6.1.4.1.89.47.1.13.1.7,RADLAN-rlFft::rlIpFftStnSrcMacAddress,OCTET,read-only,,current,,The MAC source address.
.1.3.6.1.4.1.89.47.1.13.1.8,RADLAN-rlFft::rlIpFftStnOutIfIndex,INTEGER,read-only,,current,,The value of ifIndex of output physical port.
.1.3.6.1.4.1.89.47.1.13.1.9,RADLAN-rlFft::rlIpFftStnVid,INTEGER,read-only,,current,,The vid of the output port.
.1.3.6.1.4.1.89.47.1.13.1.10,RADLAN-rlFft::rlIpFftStnTaggedMode,INTEGER,read-only,,current,untagged(1):tagged(2):basedPortConfig(3),The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value 
.1.3.6.1.4.1.89.47.1.13.1.11,RADLAN-rlFft::rlIpFftStnAge,INTEGER,read-only,,current,,The age of the entry in seconds from the inserting.
.1.3.6.1.4.1.89.47.1.14,RADLAN-rlFft::rlIpFftSubTable,,not-accessible,,current,,The (conceptual) table containing IP Fast Forwarding information per subnet for IP datagrams. 
.1.3.6.1.4.1.89.47.1.14.1,RADLAN-rlFft::rlIpFftSubEntry,,not-accessible,rlIpFftSubMrid:rlIpFftSubDstIpSubnet:rlIpFftSubDstIpMask,current,,An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
.1.3.6.1.4.1.89.47.1.14.1.1,RADLAN-rlFft::rlIpFftSubMrid,INTEGER,read-only,,current,,The router's Instance Identifier in the NFFT. 
.1.3.6.1.4.1.89.47.1.14.1.2,RADLAN-rlFft::rlIpFftSubDstIpSubnet,IpAddress,read-only,,current,,The IP destination subnet for which this entry contains IP forwarding information.
.1.3.6.1.4.1.89.47.1.14.1.3,RADLAN-rlFft::rlIpFftSubDstIpMask,IpAddress,read-only,,current,,The IP destination mask for which this entry contains IP forwarding information.
.1.3.6.1.4.1.89.47.1.14.1.4,RADLAN-rlFft::rlIpFftSubAge,INTEGER,read-only,,current,,The age of the entry in seconds from the inserting.
.1.3.6.1.4.1.89.47.1.14.1.5,RADLAN-rlFft::rlIpFftSubNextHopSetRefCount,INTEGER,read-only,,current,,The number of NFFT entries that used the given NextHop set (ECMP path). 
.1.3.6.1.4.1.89.47.1.14.1.6,RADLAN-rlFft::rlIpFftSubNextHopCount,INTEGER,read-only,,current,,The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.7,RADLAN-rlFft::rlIpFftSubNextHopIfindex1,INTEGER,read-only,,current,,The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.8,RADLAN-rlFft::rlIpFftSubNextHopIpAddr1,IpAddress,read-only,,current,,The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.9,RADLAN-rlFft::rlIpFftSubNextHopIfindex2,INTEGER,read-only,,current,,The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.10,RADLAN-rlFft::rlIpFftSubNextHopIpAddr2,IpAddress,read-only,,current,,The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.11,RADLAN-rlFft::rlIpFftSubNextHopIfindex3,INTEGER,read-only,,current,,The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.12,RADLAN-rlFft::rlIpFftSubNextHopIpAddr3,IpAddress,read-only,,current,,The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.13,RADLAN-rlFft::rlIpFftSubNextHopIfindex4,INTEGER,read-only,,current,,The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.14,RADLAN-rlFft::rlIpFftSubNextHopIpAddr4,IpAddress,read-only,,current,,The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.15,RADLAN-rlFft::rlIpFftSubNextHopIfindex5,INTEGER,read-only,,current,,The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.16,RADLAN-rlFft::rlIpFftSubNextHopIpAddr5,IpAddress,read-only,,current,,The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.17,RADLAN-rlFft::rlIpFftSubNextHopIfindex6,INTEGER,read-only,,current,,The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.18,RADLAN-rlFft::rlIpFftSubNextHopIpAddr6,IpAddress,read-only,,current,,The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.19,RADLAN-rlFft::rlIpFftSubNextHopIfindex7,INTEGER,read-only,,current,,The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.20,RADLAN-rlFft::rlIpFftSubNextHopIpAddr7,IpAddress,read-only,,current,,The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.21,RADLAN-rlFft::rlIpFftSubNextHopIfindex8,INTEGER,read-only,,current,,The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.14.1.22,RADLAN-rlFft::rlIpFftSubNextHopIpAddr8,IpAddress,read-only,,current,,The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. 
.1.3.6.1.4.1.89.47.1.15,RADLAN-rlFft::rlIpFftCountersTable,,not-accessible,,current,,The (conceptual) table containing IP Counters information per one IP FFT.
.1.3.6.1.4.1.89.47.1.15.1,RADLAN-rlFft::rlIpFftCountersEntry,,not-accessible,rlIpFftCountersIndex,current,,An entry (conceptual row) containing the IP Counters information containing amount of IP datagrams passed by certain IP FFT.
.1.3.6.1.4.1.89.47.1.15.1.1,RADLAN-rlFft::rlIpFftCountersIndex,INTEGER,read-only,,current,,The value of the index of the IP FFT.
.1.3.6.1.4.1.89.47.1.15.1.2,RADLAN-rlFft::rlIpFftInReceives,INTEGER,read-only,,current,,The amount of received IP datagrams 
.1.3.6.1.4.1.89.47.1.15.1.3,RADLAN-rlFft::rlIpFftForwDatagrams,INTEGER,read-only,,current,,The amount of forwarded IP datagrams 
.1.3.6.1.4.1.89.47.1.15.1.4,RADLAN-rlFft::rlIpFftInDiscards,INTEGER,read-only,,current,,The amount of discarded IP datagrams 
.1.3.6.1.4.1.89.47.1.16,RADLAN-rlFft::rlIpFftNextHopTable,,not-accessible,,current,,The (conceptual) table contains NextHop information used for routing IP datagrams. 
.1.3.6.1.4.1.89.47.1.16.1,RADLAN-rlFft::rlIpFftNextHopEntry,,not-accessible,rlIpFftNextHopifindex:rlIpFftNextHopIpAddress,current,,An entry (conceptual row) contains the NextHop info information for routing IP datagrams.
.1.3.6.1.4.1.89.47.1.16.1.1,RADLAN-rlFft::rlIpFftNextHopifindex,INTEGER,read-only,,current,,The value of the IP Interface index of the NextHop. 
.1.3.6.1.4.1.89.47.1.16.1.2,RADLAN-rlFft::rlIpFftNextHopIpAddress,IpAddress,read-only,,current,,The IP address of a NextHop for which an entry contains IP forwarding information. 
.1.3.6.1.4.1.89.47.1.16.1.3,RADLAN-rlFft::rlIpFftNextHopValid,INTEGER,read-only,,current,valid(1):invalid(2),The NextHop Valid bit. When L2 info is missing, a NextHop has Invalid value. 
.1.3.6.1.4.1.89.47.1.16.1.4,RADLAN-rlFft::rlIpFftNextHopType,INTEGER,read-only,,current,local(1):remote(2):reject(3):drop(4),The NextHop type. 
.1.3.6.1.4.1.89.47.1.16.1.5,RADLAN-rlFft::rlIpFftNextHopReferenceCount,INTEGER,read-only,,current,,IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop. 
.1.3.6.1.4.1.89.47.1.16.1.6,RADLAN-rlFft::rlIpFftNextHopNetAddress,OCTET,read-only,,current,,The NextHop Physical Address.
.1.3.6.1.4.1.89.47.1.16.1.7,RADLAN-rlFft::rlIpFftNextHopVid,INTEGER,read-only,,current,,The vid of the output port.
.1.3.6.1.4.1.89.47.1.16.1.8,RADLAN-rlFft::rlIpFftNextHopMacAddress,OCTET,read-only,,current,,The MAC destination address.
.1.3.6.1.4.1.89.47.1.16.1.9,RADLAN-rlFft::rlIpFftNextHopOutIfIndex,INTEGER,read-only,,current,,The value of ifIndex of output physical port.
.1.3.6.1.4.1.89.47.1.17,RADLAN-rlFft::rlIpFftL2InfoTable,,not-accessible,,current,,The (conceptual) table contains L2 information used for routing IP datagrams. 
.1.3.6.1.4.1.89.47.1.17.1,RADLAN-rlFft::rlIpFftL2InfoEntry,,not-accessible,rlIpFftL2InfoIfindex:rlIpFftL2InfoDstMacAddress,current,,An entry (conceptual row) contains the L2 info information for routing IP datagrams.
.1.3.6.1.4.1.89.47.1.17.1.1,RADLAN-rlFft::rlIpFftL2InfoIfindex,INTEGER,read-only,,current,,The VLAN Ifindex of the destination port. 
.1.3.6.1.4.1.89.47.1.17.1.2,RADLAN-rlFft::rlIpFftL2InfoDstMacAddress,OCTET,read-only,,current,,The MAC destination address.
.1.3.6.1.4.1.89.47.1.17.1.3,RADLAN-rlFft::rlIpFftL2InfoValid,INTEGER,read-only,,current,valid(1):invalid(2),The L2 info entry valid bit. When L2 info is missing some information, an L2 info has Invalid value. 
.1.3.6.1.4.1.89.47.1.17.1.4,RADLAN-rlFft::rlIpFftL2InfoType,INTEGER,read-only,,current,other(1):vlan(2),The L2 info type. With Enthernet media l2 info type is vlan. WIth Tunneling feature, l2 info type will be expanded. 
.1.3.6.1.4.1.89.47.1.17.1.5,RADLAN-rlFft::rlIpFftL2InfoReferenceCount,INTEGER,read-only,,current,,The reference count contains a number of NextHop entries that use this L2 info.
.1.3.6.1.4.1.89.47.1.17.1.6,RADLAN-rlFft::rlIpFftL2InfoVid,INTEGER,read-only,,current,,The vid of the destination port. 
.1.3.6.1.4.1.89.47.1.17.1.7,RADLAN-rlFft::rlIpFftL2InfoSrcMacAddress,OCTET,read-only,,current,,The MAC source address placed to Ehernet Header of IP forwarded packet.
.1.3.6.1.4.1.89.47.1.17.1.8,RADLAN-rlFft::rlIpFftL2InfoOutIfIndex,INTEGER,read-only,,current,,The value of ifIndex of output physical port the packet is forwarded through.
.1.3.6.1.4.1.89.47.1.17.1.9,RADLAN-rlFft::rlIpFftL2InfoTaggedMode,INTEGER,read-only,,current,untagged(1):tagged(2):basedPortConfig(3),The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field get the BasedPortConfig value.
.1.3.6.1.4.1.89.47.2,RADLAN-rlFft::rlIpxFFT,,,,,,
.1.3.6.1.4.1.89.47.2.1,RADLAN-rlFft::rlIpxFftMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.47.2.2,RADLAN-rlFft::rlIpxMaxFftNumber,INTEGER,read-only,,current,,The maximun number of IPX FFTs. An IPX FFT gets a number from 1 until rlIpxMaxFftSetNumber.
.1.3.6.1.4.1.89.47.2.3,RADLAN-rlFft::rlIpxFftDynamicSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether dynamic IPX FFTs are supported.
.1.3.6.1.4.1.89.47.2.4,RADLAN-rlFft::rlIpxFftNetworkSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether subtable per IPX network is supported.
.1.3.6.1.4.1.89.47.2.5,RADLAN-rlFft::rlIpxFftUnknownAddrMsgUsed,INTEGER,read-only,,current,used(1):unused(2),Specifies whether the 3SW uses the unknown address message.
.1.3.6.1.4.1.89.47.2.6,RADLAN-rlFft::rlIpxFftAgingTimeSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether aging time is supported for subtable per station.
.1.3.6.1.4.1.89.47.2.7,RADLAN-rlFft::rlIpxFftSrcAddrSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether an IPX subtable per station contains source IPX address.
.1.3.6.1.4.1.89.47.2.8,RADLAN-rlFft::rlIpxFftAgingTimeout,INTEGER,read-write,,current,,The aging timeout in seconds.
.1.3.6.1.4.1.89.47.2.9,RADLAN-rlFft::rlIpxFftRedBoundary,INTEGER,read-write,,current,,The red boundary in percents.
.1.3.6.1.4.1.89.47.2.10,RADLAN-rlFft::rlIpxFftYellowBoundary,INTEGER,read-write,,current,,The yellow boundary in percents.
.1.3.6.1.4.1.89.47.2.12,RADLAN-rlFft::rlIpxFftNumTable,,not-accessible,,current,,The (conceptual) table containing number routes of the IPX Fast Forwarding Table. 
.1.3.6.1.4.1.89.47.2.12.1,RADLAN-rlFft::rlIpxFftNumEntry,,not-accessible,rlIpxFftNumIndex,current,,An entry (conceptual row) containing the containing number routes of of IPX SFFT and IPX NFFT 
.1.3.6.1.4.1.89.47.2.12.1.1,RADLAN-rlFft::rlIpxFftNumIndex,INTEGER,read-only,,current,,The value of the index of the IPX FFT. 
.1.3.6.1.4.1.89.47.2.12.1.2,RADLAN-rlFft::rlIpxFftNumStnRoutesNumber,INTEGER,read-only,,current,,The number of routes containing in the IPX SFFT. 
.1.3.6.1.4.1.89.47.2.12.1.3,RADLAN-rlFft::rlIpxFftNumSubRoutesNumber,INTEGER,read-only,,current,,The number of routes containing in the IPX NFFT. 
.1.3.6.1.4.1.89.47.2.13,RADLAN-rlFft::rlIpxFftStnTable,,not-accessible,,current,,The (conceptual) table containing IPX Fast Forwarding information per station for IPX. 
.1.3.6.1.4.1.89.47.2.13.1,RADLAN-rlFft::rlIpxFftStnEntry,,not-accessible,rlIpxFftStnIndex:rlIpxFftStnDstNetid:rlIpxFftStnDstNode:rlIpxFftStnSrcNetid:rlIpxFftStnSrcNode,current,,An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
.1.3.6.1.4.1.89.47.2.13.1.1,RADLAN-rlFft::rlIpxFftStnIndex,INTEGER,read-only,,current,,The value of the index of the IPX FFT. 
.1.3.6.1.4.1.89.47.2.13.1.2,RADLAN-rlFft::rlIpxFftStnDstNetid,OCTET,read-only,,current,,The destination network for which this entry contains IPX forwarding information.
.1.3.6.1.4.1.89.47.2.13.1.3,RADLAN-rlFft::rlIpxFftStnDstNode,OCTET,read-only,,current,,The destination node for which this entry contains IPX forwarding information.
.1.3.6.1.4.1.89.47.2.13.1.4,RADLAN-rlFft::rlIpxFftStnSrcNetid,OCTET,read-only,,current,,The source network for which this entry contains IPX forwarding information.
.1.3.6.1.4.1.89.47.2.13.1.5,RADLAN-rlFft::rlIpxFftStnSrcNode,OCTET,read-only,,current,,The destination node for which this entry contains IPX forwarding information.
.1.3.6.1.4.1.89.47.2.13.1.6,RADLAN-rlFft::rlIpxFftStnDstIpxAddrType,INTEGER,read-only,,current,local(1):remote(2),The destination address type. 
.1.3.6.1.4.1.89.47.2.13.1.7,RADLAN-rlFft::rlIpxFftStnEncapsulation,INTEGER,read-only,,current,novell(1):ethernet(2):llc(3):snap(4),The encapsulation method associated with this route.
.1.3.6.1.4.1.89.47.2.13.1.8,RADLAN-rlFft::rlIpxFftStnDstMacAddress,OCTET,read-only,,current,,The MAC destination address.
.1.3.6.1.4.1.89.47.2.13.1.9,RADLAN-rlFft::rlIpxFftStnSrcMacAddress,OCTET,read-only,,current,,The MAC source address.
.1.3.6.1.4.1.89.47.2.13.1.10,RADLAN-rlFft::rlIpxFftStnOutIfIndex,INTEGER,read-only,,current,,The value of ifIndex of output physical port.
.1.3.6.1.4.1.89.47.2.13.1.11,RADLAN-rlFft::rlIpxFftStnTci,INTEGER,read-only,,current,,The value of TCI or 0.
.1.3.6.1.4.1.89.47.2.13.1.12,RADLAN-rlFft::rlIpxFftStnFacsIndex,INTEGER,read-only,,current,,The value of index of the FACS Table.
.1.3.6.1.4.1.89.47.2.13.1.13,RADLAN-rlFft::rlIpxFftStnAge,INTEGER,read-only,,current,,The age of the entry in seconds.
.1.3.6.1.4.1.89.47.2.14,RADLAN-rlFft::rlIpxFftSubTable,,not-accessible,,current,,The (conceptual) table containing IPX Fast Forwarding information per network for IPX . 
.1.3.6.1.4.1.89.47.2.14.1,RADLAN-rlFft::rlIpxFftSubEntry,,not-accessible,rlIpxFftSubIndex:rlIpxFftSubDstNetid,current,,An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
.1.3.6.1.4.1.89.47.2.14.1.1,RADLAN-rlFft::rlIpxFftSubIndex,INTEGER,read-only,,current,,The value of the index of the IPX FFT. 
.1.3.6.1.4.1.89.47.2.14.1.2,RADLAN-rlFft::rlIpxFftSubDstNetid,OCTET,read-only,,current,,The destination network for which this entry contains IPX forwarding information.
.1.3.6.1.4.1.89.47.2.14.1.3,RADLAN-rlFft::rlIpxFftSubEncapsulation,INTEGER,read-only,,current,novell(1):ethernet(2):llc(3):snap(4),The encapsulation method associated with this route.
.1.3.6.1.4.1.89.47.2.14.1.4,RADLAN-rlFft::rlIpxFftSubDstMacAddress,OCTET,read-only,,current,,The MAC destination address.
.1.3.6.1.4.1.89.47.2.14.1.5,RADLAN-rlFft::rlIpxFftSubSrcMacAddress,OCTET,read-only,,current,,The MAC source address.
.1.3.6.1.4.1.89.47.2.14.1.6,RADLAN-rlFft::rlIpxFftSubOutIfIndex,INTEGER,read-only,,current,,The value of ifIndex of output physical port.
.1.3.6.1.4.1.89.47.2.14.1.7,RADLAN-rlFft::rlIpxFftSubTci,INTEGER,read-only,,current,,The value of TCI or 0.
.1.3.6.1.4.1.89.47.2.14.1.8,RADLAN-rlFft::rlIpxFftSubFacsIndex,INTEGER,read-only,,current,,The value of index of the FACS Table.
.1.3.6.1.4.1.89.47.2.14.1.9,RADLAN-rlFft::rlIpxFftSubAge,INTEGER,read-only,,current,,The age of the entry in seconds.
.1.3.6.1.4.1.89.47.2.15,RADLAN-rlFft::rlIpxFftCountersTable,,not-accessible,,current,,The (conceptual) table containing IPX Counters information per one IPX FFT.
.1.3.6.1.4.1.89.47.2.15.1,RADLAN-rlFft::rlIpxFftCountersEntry,,not-accessible,rlIpxFftCountersIndex,current,,An entry (conceptual row) containing the IP Counters information containing amount of IPX datagrams passed by certain IPX FFT.
.1.3.6.1.4.1.89.47.2.15.1.1,RADLAN-rlFft::rlIpxFftCountersIndex,INTEGER,read-only,,current,,The value of the index of the IPX FFT.
.1.3.6.1.4.1.89.47.2.15.1.2,RADLAN-rlFft::rlIpxFftInReceives,INTEGER,read-only,,current,,The amount of received IPX datagrams 
.1.3.6.1.4.1.89.47.2.15.1.3,RADLAN-rlFft::rlIpxFftForwDatagrams,INTEGER,read-only,,current,,The amount of forwarded IPX datagrams 
.1.3.6.1.4.1.89.47.2.15.1.4,RADLAN-rlFft::rlIpxFftInDiscards,INTEGER,read-only,,current,,The amount of discarded IPX datagrams 
.1.3.6.1.4.1.89.47.3,RADLAN-rlFft::rlIpmFFT,,,,,,
.1.3.6.1.4.1.89.47.3.1,RADLAN-rlFft::rlIpmFftMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.47.3.2,RADLAN-rlFft::rlIpmMaxFftNumber,INTEGER,read-only,,current,,The maximun number of IPM FFTs. NT_IPM gets a number from Host Parameters
.1.3.6.1.4.1.89.47.3.3,RADLAN-rlFft::rlIpmFftDynamicSupported,INTEGER,read-only,,current,supported(1):unsupported(2),Specifies whether dynamic IPM FFTs are supported. An NT_IPM gets a number from Host Parameters
.1.3.6.1.4.1.89.47.3.4,RADLAN-rlFft::rlIpmFftUnknownAddrMsgUsed,INTEGER,read-only,,current,used(1):unused(2),Specifies whether the 3SW uses the unknown address message. An NT_IPM gets a number from Host Parameters
.1.3.6.1.4.1.89.47.3.5,RADLAN-rlFft::rlIpmFftUserAgingTimeout,Unsigned32,read-write,,current,,The aging timeout in seconds. SNMP user writes. There is a default value of aging timeout.
.1.3.6.1.4.1.89.47.3.6,RADLAN-rlFft::rlIpmFftRouterAgingTimeout,INTEGER,read-only,,current,,The aging timeout in seconds. NT_IPM keeps value that Router level gave. This is high priority value for aging timeout.
.1.3.6.1.4.1.89.47.3.8,RADLAN-rlFft::rlIpmFftNumTable,,not-accessible,,current,,The (conceptual) table containing number routes of the IPM Fast Forwarding Table. 
.1.3.6.1.4.1.89.47.3.8.1,RADLAN-rlFft::rlIpmFftNumEntry,,not-accessible,rlIpmFftNumIndex,current,,An entry (conceptual row) containing the containing number routes of an IPM FFT.
.1.3.6.1.4.1.89.47.3.8.1.1,RADLAN-rlFft::rlIpmFftNumIndex,INTEGER,read-only,,current,,The value of the index of the IPM FFT.
.1.3.6.1.4.1.89.47.3.8.1.2,RADLAN-rlFft::rlIpmFftNumRoutesNumber,INTEGER,read-only,,current,,The number of routes containing in the IPM FFT.
.1.3.6.1.4.1.89.47.3.9,RADLAN-rlFft::rlIpmFftTable,,not-accessible,,current,,The (conceptual) table containing IPM Fast Forwarding information for IPM datagrams.
.1.3.6.1.4.1.89.47.3.9.1,RADLAN-rlFft::rlIpmFftEntry,,not-accessible,rlIpmFftIndex:rlIpmFftSrcIpAddress:rlIpmFftDstIpAddress,current,,An entry (conceptual row) containing the IPM fast forwarding information for IP datagrams from a particular source and destination addresses.
.1.3.6.1.4.1.89.47.3.9.1.1,RADLAN-rlFft::rlIpmFftIndex,INTEGER,read-only,,current,,The value of the index of the IPM FFT. 
.1.3.6.1.4.1.89.47.3.9.1.2,RADLAN-rlFft::rlIpmFftSrcIpAddress,IpAddress,read-only,,current,,The IP source address for which this entry contains IPM forwarding information.
.1.3.6.1.4.1.89.47.3.9.1.3,RADLAN-rlFft::rlIpmFftDstIpAddress,IpAddress,read-only,,current,,The IPM destination address for which this entry contains IPM forwarding information.
.1.3.6.1.4.1.89.47.3.9.1.4,RADLAN-rlFft::rlIpmFftSrcIpMask,IpAddress,read-only,,current,,The IP source mask for which this entry contains IP forwarding information.
.1.3.6.1.4.1.89.47.3.9.1.5,RADLAN-rlFft::rlIpmFftInputIfIndex,INTEGER,read-only,,current,,The input ifIndex for which this entry contains IPM forwarding information.
.1.3.6.1.4.1.89.47.3.9.1.6,RADLAN-rlFft::rlIpmFftInputVlanTag,INTEGER,read-only,,current,,The input Vlan tag together with input ifIndex defines pair (ifIndex, tag)
.1.3.6.1.4.1.89.47.3.9.1.7,RADLAN-rlFft::rlIpmFftForwardAction,INTEGER,read-only,,current,forward(1):discard(2),The IPM forward action.
.1.3.6.1.4.1.89.47.3.9.1.8,RADLAN-rlFft::rlIpmFftInportAction,INTEGER,read-only,,current,sentToCPU(1):discard(2),The IPM illegal input port action.
.1.3.6.1.4.1.89.47.3.9.1.9,RADLAN-rlFft::rlIpmFftAge,INTEGER,read-only,,current,,The age of the entry in seconds from the moment of inserting. 
.1.3.6.1.4.1.89.47.3.10,RADLAN-rlFft::rlIpmFftPortTagTable,,not-accessible,,current,,The (conceptual) table containing IPM FFT output port tag information for IPM datagrams.
.1.3.6.1.4.1.89.47.3.10.1,RADLAN-rlFft::rlIpmFftPortTagEntry,,not-accessible,rlIpmFftPortIndex:rlIpmFftPortSrcIpAddress:rlIpmFftPortDstIpAddress:rlIpmFftPortOutputifIndex:rlIpmFftPortOutputTag,current,,An entry (conceptual row) containing the IPM FFT output port tag information for IP datagrams from a particular source and destination addresses.
.1.3.6.1.4.1.89.47.3.10.1.1,RADLAN-rlFft::rlIpmFftPortIndex,INTEGER,read-only,,current,,The value of the index of the IPM FFT. 
.1.3.6.1.4.1.89.47.3.10.1.2,RADLAN-rlFft::rlIpmFftPortSrcIpAddress,IpAddress,read-only,,current,,The IP source address for which this entry contains IPM output port tag information.
.1.3.6.1.4.1.89.47.3.10.1.3,RADLAN-rlFft::rlIpmFftPortDstIpAddress,IpAddress,read-only,,current,,The IPM destination address for which this entry contains IPM port tag information.
.1.3.6.1.4.1.89.47.3.10.1.4,RADLAN-rlFft::rlIpmFftPortOutputifIndex,INTEGER,read-only,,current,,The output ifIndex 
.1.3.6.1.4.1.89.47.3.10.1.5,RADLAN-rlFft::rlIpmFftPortOutputTag,INTEGER,read-only,,current,,The output Vlan tag together with output ifIndex defines pair (ifIndex, tag)
.1.3.6.1.4.1.89.47.3.11,RADLAN-rlFft::rlIpmFftCountersTable,,not-accessible,,current,,The (conceptual) table containing IPM Counters information per FFT number. 
.1.3.6.1.4.1.89.47.3.11.1,RADLAN-rlFft::rlIpmFftCountersEntry,,not-accessible,rlIpmFftCountersIndex,current,,An entry (conceptual row) containing the IPM Counters information containing amount of IPM datagrams passed by certain FFT.
.1.3.6.1.4.1.89.47.3.11.1.1,RADLAN-rlFft::rlIpmFftCountersIndex,INTEGER,read-only,,current,,The value of the index of the IPM FFT. 
.1.3.6.1.4.1.89.47.3.11.1.2,RADLAN-rlFft::rlIpmFftInReceives,INTEGER,read-only,,current,,The amount of received IPM datagrams 
.1.3.6.1.4.1.89.47.3.11.1.3,RADLAN-rlFft::rlIpmFftForwDatagrams,INTEGER,read-only,,current,,The amount of forwarded IPM datagrams 
.1.3.6.1.4.1.89.47.3.11.1.4,RADLAN-rlFft::rlIpmFftInDiscards,INTEGER,read-only,,current,,The amount of discarded IPM datagrams 
.1.3.6.1.4.1.89.48,RADLAN-MIB::vlan,,,,,,
.1.3.6.1.4.1.89.48.1,RADLAN-vlan-MIB::vlanMibVersion,INTEGER,read-only,,current,,MIB's version: Version 2: the current VLAN MIB replaced the previous one; Version 3: field vlanPortForbiddenEgressPort was added. Version 4: dot1q and dot1v supported Version 5: Private Edge Vlan vlanPrivateEdgeSupported vlanPrivateEdgeMibVersion vlanPrivateEdgeTable
.1.3.6.1.4.1.89.48.2,RADLAN-vlan-MIB::vlanMaxTableNumber,INTEGER,read-only,,current,,Maximum number of VLAN Tables supported by the device.
.1.3.6.1.4.1.89.48.21,RADLAN-vlan-MIB::vlanNameTable,,not-accessible,,current,,This table translates Vlan name to Vlan's tag and ifindex
.1.3.6.1.4.1.89.48.21.1,RADLAN-vlan-MIB::vlanNameEntry,,not-accessible,vlanNameName,current,,The row definition for this table.
.1.3.6.1.4.1.89.48.21.1.1,RADLAN-vlan-MIB::vlanNameName,OCTET,read-only,,current,,The Vlan's name
.1.3.6.1.4.1.89.48.21.1.2,RADLAN-vlan-MIB::vlanNameTag,INTEGER,read-only,,current,,The Vlan's tag
.1.3.6.1.4.1.89.48.21.1.3,RADLAN-vlan-MIB::vlanNameIfIndex,INTEGER,read-only,,current,,The Vlan's ifindex
.1.3.6.1.4.1.89.48.22,RADLAN-vlan-MIB::vlanPortModeTable,,not-accessible,,current,,This table hold information on port status trunk or access
.1.3.6.1.4.1.89.48.22.1,RADLAN-vlan-MIB::vlanPortModeEntry,,not-accessible,ifIndex,current,,The row definition for this table.
.1.3.6.1.4.1.89.48.22.1.1,RADLAN-vlan-MIB::vlanPortModeState,INTEGER,read-write,,current,,The port state, 1 is generic cli
.1.3.6.1.4.1.89.48.27,RADLAN-vlan-MIB::vlanSendUnknownToAllPorts,INTEGER,read-write,,current,true(1):false(2),If a value of the parameter is true a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be sent to all ports of the VLAN. If a value of the parameter is false a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be discarded.
.1.3.6.1.4.1.89.48.29,RADLAN-vlan-MIB::vlanDefaultSupported,INTEGER,read-only,,current,true(1):false(2),supported or not default vlan.
.1.3.6.1.4.1.89.48.31,RADLAN-vlan-MIB::vlanDot1vSupported,INTEGER,read-only,,current,true(1):false(2),802.1v standard for vlan per port and protocol.
.1.3.6.1.4.1.89.48.32,RADLAN-vlan-MIB::vlanDefaultEnabled,INTEGER,read-write,,current,true(1):false(2),if supported default vlan , indicate enabled or disabled
.1.3.6.1.4.1.89.48.33,RADLAN-vlan-MIB::vlanSpecialTagTable,,not-accessible,,current,,special vlan tag used for this port
.1.3.6.1.4.1.89.48.33.1,RADLAN-vlan-MIB::vlanSpecialTagEntry,,not-accessible,ifIndex,current,, entry of special tag
.1.3.6.1.4.1.89.48.33.1.1,RADLAN-vlan-MIB::vlanSpecialTagVID,Unsigned32,read-write,,current,,specify the special vlan tag .
.1.3.6.1.4.1.89.48.33.1.2,RADLAN-vlan-MIB::vlanSpecialTagStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.34,RADLAN-vlan-MIB::vlanSpecialTagCurrentTable,,not-accessible,,current,,special Current vlan tag used for this port
.1.3.6.1.4.1.89.48.34.1,RADLAN-vlan-MIB::vlanSpecialTagCurrentEntry,,not-accessible,ifIndex,current,, entry of Current special tag
.1.3.6.1.4.1.89.48.34.1.1,RADLAN-vlan-MIB::vlanSpecialTagCurrentVID,Unsigned32,read-only,,current,,specify the special vlan tag .
.1.3.6.1.4.1.89.48.34.1.2,RADLAN-vlan-MIB::vlanSpecialTagCurrentReserved,INTEGER,read-only,,current,true(1):false(2),specify if the special vlan tag is reserved .
.1.3.6.1.4.1.89.48.34.1.3,RADLAN-vlan-MIB::vlanSpecialTagCurrentActive,INTEGER,read-only,,current,true(1):false(2),specify if the special vlan tag is used .
.1.3.6.1.4.1.89.48.35,RADLAN-vlan-MIB::vlanPrivateEdgeSupported,INTEGER,read-only,,current,true(1):false(2),is private edge supported.
.1.3.6.1.4.1.89.48.36,RADLAN-vlan-MIB::vlanPrivateEdgeVersion,INTEGER,read-only,,current,,private edge version.
.1.3.6.1.4.1.89.48.37,RADLAN-vlan-MIB::vlanPrivateEdgeTable,,not-accessible,,current,,table for pve port and uplink
.1.3.6.1.4.1.89.48.37.1,RADLAN-vlan-MIB::vlanPrivateEdgeEntry,,not-accessible,ifIndex,current,, entry of pve
.1.3.6.1.4.1.89.48.37.1.1,RADLAN-vlan-MIB::vlanPrivateEdgeUplink,INTEGER,read-write,,current,,specify the uplink port.
.1.3.6.1.4.1.89.48.37.1.2,RADLAN-vlan-MIB::vlanPrivateEdgeStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.38,RADLAN-vlan-MIB::vlanDynamicVlanSupported,INTEGER,read-only,,current,true(1):false(2),is DynamicVlanVlan supported.
.1.3.6.1.4.1.89.48.39,RADLAN-vlan-MIB::vlanDynamicVlanTable,,not-accessible,,current,,table for DynamicVlan
.1.3.6.1.4.1.89.48.39.1,RADLAN-vlan-MIB::vlanDynamicVlanEntry,,not-accessible,vlanDynamicVlanMacAddress,current,, entry of DynamicVlan
.1.3.6.1.4.1.89.48.39.1.1,RADLAN-vlan-MIB::vlanDynamicVlanMacAddress,OCTET,not-accessible,,current,,mac address 
.1.3.6.1.4.1.89.48.39.1.2,RADLAN-vlan-MIB::vlanDynamicVlanTag,Unsigned32,read-write,,current,,vlan Tag
.1.3.6.1.4.1.89.48.39.1.3,RADLAN-vlan-MIB::vlanDynamicVlanStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.40,RADLAN-vlan-MIB::vlanPortModeExtTable,,not-accessible,,current,,This table hold information on port status trunk or access
.1.3.6.1.4.1.89.48.40.1,RADLAN-vlan-MIB::vlanPortModeExtEntry,,not-accessible,ifIndex,current,,The row definition for this table.
.1.3.6.1.4.1.89.48.40.1.1,RADLAN-vlan-MIB::vlanPortModeExtState,INTEGER,read-write,,current,,The ext
.1.3.6.1.4.1.89.48.40.1.2,RADLAN-vlan-MIB::vlanPortModeExtStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.41,RADLAN-vlan-MIB::vlanPrivateSupported,INTEGER,read-only,,current,true(1):false(2),is private vlan supported.
.1.3.6.1.4.1.89.48.42,RADLAN-vlan-MIB::vlanPrivateTable,,not-accessible,,current,,table for PrivateVlan
.1.3.6.1.4.1.89.48.43,RADLAN-vlan-MIB::vlanPrivateCommunityTable,,not-accessible,,current,,table for PrivateVlan
.1.3.6.1.4.1.89.48.43.1,RADLAN-vlan-MIB::vlanPrivateCommunityEntry,,not-accessible,dot1qVlanIndex:vlanPrivateCommunityVlanTag,current,, entry of PrivateVlan
.1.3.6.1.4.1.89.48.43.1.1,RADLAN-vlan-MIB::vlanPrivateCommunityVlanTag,Unsigned32,not-accessible,,current,,vlan Tag
.1.3.6.1.4.1.89.48.43.1.2,RADLAN-vlan-MIB::vlanPrivateCommunityStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.44,RADLAN-vlan-MIB::vlanMulticastTvTable,,not-accessible,,current,, multicast vlan used for this port
.1.3.6.1.4.1.89.48.44.1,RADLAN-vlan-MIB::vlanMulticastTvEntry,,not-accessible,ifIndex,current,, entry of multicast tag
.1.3.6.1.4.1.89.48.44.1.1,RADLAN-vlan-MIB::vlanMulticastTvVID,Unsigned32,read-write,,current,,specify the TV vlan tag, vlan must exist .
.1.3.6.1.4.1.89.48.44.1.2,RADLAN-vlan-MIB::vlanMulticastTvStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.45,RADLAN-vlan-MIB::vlanMacBaseVlanGroupTable,,not-accessible,,current,,A table that contains mappings from Range of MAC addresses to Group Identifiers used for MAC-based VLAN Classification.
.1.3.6.1.4.1.89.48.45.1,RADLAN-vlan-MIB::vlanMacBaseVlanGroupEntry,,not-accessible,vlanMacBaseVlanMacAddress:vlanMacBaseVlanMacMask,current,,A mapping from a Range of MAC addresses to a Group Identifier.
.1.3.6.1.4.1.89.48.45.1.1,RADLAN-vlan-MIB::vlanMacBaseVlanMacAddress,OCTET,not-accessible,,current,,The base MAC address of the range.
.1.3.6.1.4.1.89.48.45.1.2,RADLAN-vlan-MIB::vlanMacBaseVlanMacMask,INTEGER,not-accessible,,current,,The Mask of the range. The mask determains the leading '1' bits of the mask (MSB). 48 means single HOST and 9 means the widest range. The MASK is limited to 9 to avoid entring ranges including multicast addresses. 
.1.3.6.1.4.1.89.48.45.1.3,RADLAN-vlan-MIB::vlanMacBaseVlanGroupId,INTEGER,read-create,,current,,Represents a group of ranges of MAC addresses that are associated together when assigning a VID to a frame.
.1.3.6.1.4.1.89.48.45.1.4,RADLAN-vlan-MIB::vlanMacBaseVlanGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.4.1.89.48.46,RADLAN-vlan-MIB::vlanMacBaseVlanPortTable,,not-accessible,,current,,A table that contains VID sets used for MAC-based VLAN Classification.
.1.3.6.1.4.1.89.48.46.1,RADLAN-vlan-MIB::vlanMacBaseVlanPortEntry,,not-accessible,dot1dBasePort:vlanMacBaseVlanPortGroupId,current,,A VID set for a port and group.
.1.3.6.1.4.1.89.48.46.1.1,RADLAN-vlan-MIB::vlanMacBaseVlanPortGroupId,INTEGER,not-accessible,,current,,Designates a group of Ranges in the ranges Group Database.
.1.3.6.1.4.1.89.48.46.1.2,RADLAN-vlan-MIB::vlanMacBaseVlanPortGroupVid,Unsigned32,read-create,,current,,The VID associated with a group of range MAC addresses for each port.
.1.3.6.1.4.1.89.48.46.1.3,RADLAN-vlan-MIB::vlanMacBaseVlanPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.4.1.89.48.47,RADLAN-vlan-MIB::vlanPrivateEdgeGroupTable,,not-accessible,,current,,table for pve port and uplink
.1.3.6.1.4.1.89.48.47.1,RADLAN-vlan-MIB::vlanPrivateEdgeGroupEntry,,not-accessible,vlanPrivateEdgeGroupSource,current,, entry of pve
.1.3.6.1.4.1.89.48.47.1.1,RADLAN-vlan-MIB::vlanPrivateEdgeGroupSource,INTEGER,read-only,,current,,specify the uplink group.
.1.3.6.1.4.1.89.48.47.1.2,RADLAN-vlan-MIB::vlanPrivateEdgeGroupUplink,INTEGER,read-write,,current,,specify the uplink port.
.1.3.6.1.4.1.89.48.47.1.3,RADLAN-vlan-MIB::vlanPrivateEdgeGroupStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.48,RADLAN-vlan-MIB::vlanPrivateEdgeGroupIfIndexTable,,not-accessible,,current,,table for pve port and uplink
.1.3.6.1.4.1.89.48.48.1,RADLAN-vlan-MIB::vlanPrivateEdgeGroupIfIndexEntry,,not-accessible,ifIndex,current,, entry of pve
.1.3.6.1.4.1.89.48.48.1.1,RADLAN-vlan-MIB::vlanPrivateEdgeGroupIfIndexID,INTEGER,read-only,,current,,specify the ifIndex group id.
.1.3.6.1.4.1.89.48.48.1.2,RADLAN-vlan-MIB::vlanPrivateEdgeGroupIfIndexDomainID,INTEGER,read-only,,current,,specify the ifIndex group id.
.1.3.6.1.4.1.89.48.49,RADLAN-vlan-MIB::vlanSubnetRangeTable,,not-accessible,,current,,A table that contains mappings from subnet range to Group Identifiers used for Port-and-subnet-based VLAN Classification.
.1.3.6.1.4.1.89.48.49.1,RADLAN-vlan-MIB::vlanSubnetRangeEntry,,not-accessible,vlanSubnetRangeAddr:vlanSubnetRangeMask,current,,A mapping from a subnet to a Group Identifier.
.1.3.6.1.4.1.89.48.49.1.1,RADLAN-vlan-MIB::vlanSubnetRangeAddr,IpAddress,read-only,,current,,The IP address of the range 
.1.3.6.1.4.1.89.48.49.1.2,RADLAN-vlan-MIB::vlanSubnetRangeMask,INTEGER,read-only,,current,,The numbers of continuous ones in the mask 
.1.3.6.1.4.1.89.48.49.1.3,RADLAN-vlan-MIB::vlanSubnetRangeGroupId,INTEGER,read-create,,current,,Represents a group of subnets that are associated together when assigning a VID to a frame.
.1.3.6.1.4.1.89.48.49.1.4,RADLAN-vlan-MIB::vlanSubnetRangeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.4.1.89.48.50,RADLAN-vlan-MIB::vlanSubnetPortTable,,not-accessible,,current,,A table that contains VID sets used for Port-and-subnet-based VLAN Classification.
.1.3.6.1.4.1.89.48.50.1,RADLAN-vlan-MIB::vlanSubnetPortEntry,,not-accessible,dot1dBasePort:vlanSubnetPortGroupId,current,,A VID set for a port.
.1.3.6.1.4.1.89.48.50.1.1,RADLAN-vlan-MIB::vlanSubnetPortGroupId,INTEGER,not-accessible,,current,,Designates a group of subnets in the Group Database.
.1.3.6.1.4.1.89.48.50.1.2,RADLAN-vlan-MIB::vlanSubnetPortGroupVid,INTEGER,read-create,,current,,The VID associated with a group of subnets for each port.
.1.3.6.1.4.1.89.48.50.1.3,RADLAN-vlan-MIB::vlanSubnetPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.4.1.89.48.51,RADLAN-vlan-MIB::vlanTriplePlayTable,,not-accessible,,current,, TriplePlay table, map CPE vlan to multicastTvVlan
.1.3.6.1.4.1.89.48.51.1,RADLAN-vlan-MIB::vlanTriplePlayEntry,,not-accessible,vlanTriplePlayInnerVID,current,, entry of TriplePlay table
.1.3.6.1.4.1.89.48.51.1.1,RADLAN-vlan-MIB::vlanTriplePlayInnerVID,Unsigned32,not-accessible,,current,, Specifies the CPE inner vlan.
.1.3.6.1.4.1.89.48.51.1.2,RADLAN-vlan-MIB::vlanTriplePlayMulticastTvVID,Unsigned32,read-create,,current,, Specifies the multicast TV outer vlan.
.1.3.6.1.4.1.89.48.51.1.3,RADLAN-vlan-MIB::vlanTriplePlayRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row creation and removal conventions.
.1.3.6.1.4.1.89.48.52,RADLAN-vlan-MIB::vlanTriplePlayMulticastTvTable,,not-accessible,,current,, TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
.1.3.6.1.4.1.89.48.52.1,RADLAN-vlan-MIB::vlanTriplePlayMulticatTvEntry,,not-accessible,vlanTriplePlayMulticastTvMulticastTvVID,current,, entry of triple play MulticastTv table
.1.3.6.1.4.1.89.48.52.1.1,RADLAN-vlan-MIB::vlanTriplePlayMulticastTvMulticastTvVID,Unsigned32,read-only,,current,,Specifies the multicast TV external vlan.
.1.3.6.1.4.1.89.48.52.1.2,RADLAN-vlan-MIB::vlanTriplePlayMulticastTvMulticastTvPortList,OCTET,read-write,,current,,the multicast tv port list.
.1.3.6.1.4.1.89.48.53,RADLAN-vlan-MIB::vlanDefaultExtManagment,INTEGER,read-write,,current,true(1):false(2),enable disable ext managment on default vlan.
.1.3.6.1.4.1.89.48.54,RADLAN-vlan-MIB::vlanVoice,,,,,,
.1.3.6.1.4.1.89.48.54.1,RADLAN-vlan-MIB::vlanVoiceAgingTimeout,INTEGER,read-write,,current,,The vlanVoiceAgingTimeout indicates the time (in units of minutes) from when the last OUI MAC was ageout from the FDB the port will be removed from the Voice VLAN. The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours). The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.3.6.1.4.1.89.48.54.2,RADLAN-vlan-MIB::vlanVoiceTable,,not-accessible,,current,,A table containing static configuration information for each voice VLAN configured into the device and dynamic port membership. All entries are permanent and will be restored after the device is reset.
.1.3.6.1.4.1.89.48.54.2.1,RADLAN-vlan-MIB::vlanVoiceEntry,,not-accessible,dot1qVlanIndex,current,,Information for a voice VLAN configured into the device by management.
.1.3.6.1.4.1.89.48.54.2.1.1,RADLAN-vlan-MIB::vlanVoicePriority,INTEGER,read-write,,current,,An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge.
.1.3.6.1.4.1.89.48.54.2.1.2,RADLAN-vlan-MIB::vlanVoicePriorityRemark,INTEGER,read-create,,current,true(1):false(2),Remark VPT on tagged frames egress the voice vlan according. to priority true.false
.1.3.6.1.4.1.89.48.54.2.1.3,RADLAN-vlan-MIB::vlanVoiceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.4.1.89.48.54.3,RADLAN-vlan-MIB::vlanVoiceOUITable,,not-accessible,,current,,A table containing static global configuration information for Voice VLANs OUI MAC Prefixes. All entries are permanent and will be restored after the device is reset.
.1.3.6.1.4.1.89.48.54.3.1,RADLAN-vlan-MIB::vlanVoiceOUIEntry,,not-accessible,vlanVoiceOUIPrefix,current,,Information for a voice VLANs OUI MAC Prefixes configured into the device by management.
.1.3.6.1.4.1.89.48.54.3.1.1,RADLAN-vlan-MIB::vlanVoiceOUIPrefix,OCTET,not-accessible,,current,,The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUITable. Voice VLANs OUI Prefix is the first 3 most significant octets of the MAC address.
.1.3.6.1.4.1.89.48.54.3.1.2,RADLAN-vlan-MIB::vlanVoiceOUIDescription,OCTET,read-write,,current,,An optional text that describes the OUI.
.1.3.6.1.4.1.89.48.54.3.1.3,RADLAN-vlan-MIB::vlanVoiceOUIEntryRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.4.1.89.48.54.4,RADLAN-vlan-MIB::vlanVoicePortTable,,not-accessible,,current,,A table containing static and dynamic per port configuration information for Voice VLAN. All entries are permanent and will be restored after the device is reset.
.1.3.6.1.4.1.89.48.54.4.1,RADLAN-vlan-MIB::vlanVoicePortEntry,,not-accessible,ifIndex,current,,Static and dynamic per port information for a voice VLAN.
.1.3.6.1.4.1.89.48.54.4.1.1,RADLAN-vlan-MIB::vlanVoicePortEnable,INTEGER,read-write,,current,true(1):false(2),Enable this port to be a candidate to be added into the Voice VLAN.
.1.3.6.1.4.1.89.48.54.4.1.2,RADLAN-vlan-MIB::vlanVoicePortVlanIndex,Unsigned32,read-write,,current,,The Voice VLAN-ID the port is a candidate to be in.
.1.3.6.1.4.1.89.48.54.4.1.3,RADLAN-vlan-MIB::vlanVoicePortSecure,INTEGER,read-write,,current,true(1):false(2),Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped.
.1.3.6.1.4.1.89.48.54.4.1.4,RADLAN-vlan-MIB::vlanVoicePortCurrentMembership,INTEGER,read-only,,current,active(1):notActive(2),Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that port is a candidate to be in Voice VLAN or disabled.
.1.3.6.1.4.1.89.48.54.4.1.5,RADLAN-vlan-MIB::vlanVoicePortQosMode,INTEGER,read-write,,current,src(1):all(2),Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan.
.1.3.6.1.4.1.89.48.54.5,RADLAN-vlan-MIB::vlanVoiceOUISetToDefault,INTEGER,read-write,,current,true(1):false(2),The vlanVoiceOUISetToDefault indicates that vlanVoiceOUITable should be set to it's default values if existed (OUI default prefixes). To do so the vlanVoiceOUITable should be previuosly deleted by usual entries destroying. This object behaviors as write-only than reading this object will always return 'false'.
.1.3.6.1.4.1.89.48.55,RADLAN-vlan-MIB::vlanDefault,,,,,,
.1.3.6.1.4.1.89.48.55.1,RADLAN-vlan-MIB::vlanDefaultTaggedPorts,OCTET,read-write,,current,,list of default valn tagged ports.
.1.3.6.1.4.1.89.48.55.2,RADLAN-vlan-MIB::vlanDefaultEnabledPorts,OCTET,read-write,,current,,List of default VLAN membership enabled ports.
.1.3.6.1.4.1.89.48.56,RADLAN-vlan-MIB::vlanInetTriplePlayTable,,not-accessible,,current,, TriplePlay table, map CPE vlan to multicastTvVlan
.1.3.6.1.4.1.89.48.56.1,RADLAN-vlan-MIB::vlanInetTriplePlayEntry,,not-accessible,vlanInetTriplePlayInetAddressType:vlanTriplePlayInnerVID,current,, entry of TriplePlay table
.1.3.6.1.4.1.89.48.56.1.1,RADLAN-vlan-MIB::vlanInetTriplePlayInetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Inet type IPv4/IPv6.
.1.3.6.1.4.1.89.48.56.1.2,RADLAN-vlan-MIB::vlanInetTriplePlayInnerVID,Unsigned32,not-accessible,,current,, Specifies the CPE inner vlan.
.1.3.6.1.4.1.89.48.56.1.3,RADLAN-vlan-MIB::vlanInetTriplePlayMulticastTvVID,Unsigned32,read-create,,current,, Specifies the multicast TV outer vlan.
.1.3.6.1.4.1.89.48.56.1.4,RADLAN-vlan-MIB::vlanInetTriplePlayRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row creation and removal conventions.
.1.3.6.1.4.1.89.48.57,RADLAN-vlan-MIB::vlanInetTriplePlayMulticastTvTable,,not-accessible,,current,, TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
.1.3.6.1.4.1.89.48.57.1,RADLAN-vlan-MIB::vlanInetTriplePlayMulticatTvEntry,,not-accessible,vlanTriplePlayMulticastTvMulticastTvVID,current,, entry of triple play MulticastTv table
.1.3.6.1.4.1.89.48.57.1.1,RADLAN-vlan-MIB::vlanInetTriplePlayMulticastTvMulticastTvVID,Unsigned32,read-only,,current,,Specifies the multicast TV external vlan.
.1.3.6.1.4.1.89.48.57.1.2,RADLAN-vlan-MIB::vlanInetTriplePlayMulticastTvMulticastTvPortList,OCTET,read-write,,current,,the multicast tv port list.
.1.3.6.1.4.1.89.48.58,RADLAN-vlan-MIB::vlanAsymmetricEnabled,INTEGER,read-write,,current,true(1):false(2),Indicates enabled or disabled of Asymetric Vlan
.1.3.6.1.4.1.89.48.59.1,RADLAN-vlan-MIB::vlanPrivateEntry,,not-accessible,vlanPrivateVid,current,,Private vlan entry which contains the private vlan definition.
.1.3.6.1.4.1.89.48.59.1.1,RADLAN-vlan-MIB::vlanPrivateVid,Unsigned32,not-accessible,,current,,The static vlan ID which is set to one of the private vlan types.
.1.3.6.1.4.1.89.48.59.1.2,RADLAN-vlan-MIB::vlanPrivateType,INTEGER,read-write,,current,primary(1):isolated(2):community(3),private vlan types: primary - Carries traffic from promiscuous ports. promiscuous port can communicate with all ports of the same PVLAN, including the isolated and community ports of the same PVLAN. isolated - Carries traffic from isolated ports. isolated ports can communicate only with the promiscuous ports of the same PVLAN. community - Carries traffic from community ports. community ports of the same community can communicate among themselves and with the promiscuous ports of the same PVLAN.
.1.3.6.1.4.1.89.48.59.1.3,RADLAN-vlan-MIB::vlanPrivatePrimaryVid,Unsigned32,read-only,,current,,The primary vlan ID which has defined in VlanPrivateEntry and which is associated with secondary vlan (in vlanPrivateMapTable). vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is primary vlan.
.1.3.6.1.4.1.89.48.60,RADLAN-vlan-MIB::vlanPrivateMapTable,,not-accessible,,current,,Private vlan mapping table which contains the private vlan mapping entries.
.1.3.6.1.4.1.89.48.60.1,RADLAN-vlan-MIB::vlanPrivateMapEntry,,not-accessible,vlanPrivateMapPrimaryVid:vlanPrivateMapSecondaryVid,current,,Private vlan mapping entry which contains the primary / secondary private vlan association and their ports membership.
.1.3.6.1.4.1.89.48.60.1.1,RADLAN-vlan-MIB::vlanPrivateMapPrimaryVid,Unsigned32,not-accessible,,current,,The primary private vlan ID which is associated with the secondary (isolated or community) vlan (vlanPrivateMapSecondaryVid).
.1.3.6.1.4.1.89.48.60.1.2,RADLAN-vlan-MIB::vlanPrivateMapSecondaryVid,Unsigned32,not-accessible,,current,,The secondary private vlan ID which is associated with the primary vlan (vlanPrivateMapPrimaryVid).
.1.3.6.1.4.1.89.48.60.1.3,RADLAN-vlan-MIB::vlanPrivateMapPrimaryPorts,OCTET,read-write,,current,,The private vlan promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
.1.3.6.1.4.1.89.48.60.1.4,RADLAN-vlan-MIB::vlanPrivateMapSecondaryPorts,OCTET,read-write,,current,,The private vlan host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
.1.3.6.1.4.1.89.48.60.1.5,RADLAN-vlan-MIB::vlanPrivateMapStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.61,RADLAN-vlan-MIB::vlanTrunkPortModeTable,,not-accessible,,current,,The tables contains trunk mode port entries.
.1.3.6.1.4.1.89.48.61.1,RADLAN-vlan-MIB::vlanTrunkPortModeEntry,,not-accessible,ifIndex,current,, The entry contains port ifIndex,native vlan id and vlan list the port has a membership. The vlan list can contain not created vlans.
.1.3.6.1.4.1.89.48.61.1.1,RADLAN-vlan-MIB::vlanTrunkPortModeNativeVlanId,Unsigned32,read-write,,current,,Indicated native vlan index.Default value 0
.1.3.6.1.4.1.89.48.61.1.2,RADLAN-vlan-MIB::vlanTrunkModeList1to1024,OCTET,read-write,,current,,vlan trunk mode list 1. Default value is {0}
.1.3.6.1.4.1.89.48.61.1.3,RADLAN-vlan-MIB::vlanTrunkModeList1025to2048,OCTET,read-write,,current,,vlan trunk mode list 2. Default value is {0}
.1.3.6.1.4.1.89.48.61.1.4,RADLAN-vlan-MIB::vlanTrunkModeList2049to3072,OCTET,read-write,,current,,vlan trunk mode list 3. Default value is {0}
.1.3.6.1.4.1.89.48.61.1.5,RADLAN-vlan-MIB::vlanTrunkModeList3073to4094,OCTET,read-write,,current,,vlan trunk mode list 4. Default value is {0}
.1.3.6.1.4.1.89.48.62,RADLAN-vlan-MIB::vlanAccessPortModeTable,,not-accessible,,current,,The tables contains access mode port entries.
.1.3.6.1.4.1.89.48.62.1,RADLAN-vlan-MIB::vlanAccessPortModeEntry,,not-accessible,ifIndex,current,, The entry contains port ifIndex,access vlan id and multicast TV vlan id.
.1.3.6.1.4.1.89.48.62.1.1,RADLAN-vlan-MIB::vlanAccessPortModeVlanId,Unsigned32,read-write,,current,,Indicated access vlan id.Default value is 0
.1.3.6.1.4.1.89.48.62.1.2,RADLAN-vlan-MIB::vlanAccessPortModeMcstTvVlanId,Unsigned32,read-write,,current,,Indicated multicast TV vlan id. 
.1.3.6.1.4.1.89.48.63,RADLAN-vlan-MIB::vlanCustomerPortModeTable,,not-accessible,,current,,The tables contains customer mode port entries.
.1.3.6.1.4.1.89.48.63.1,RADLAN-vlan-MIB::vlanCustomerPortModeEntry,,not-accessible,ifIndex,current,, The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id.
.1.3.6.1.4.1.89.48.63.1.1,RADLAN-vlan-MIB::vlanCustomerPortModeVlanId,Unsigned32,read-write,,current,,Indicated customer vlan id.Default value is 0
.1.3.6.1.4.1.89.48.63.1.2,RADLAN-vlan-MIB::vlanCustomerPortModeMtvList1to1024,OCTET,read-only,,current,,vlan customer port mode multicast TV list 1. Default value is {0}
.1.3.6.1.4.1.89.48.63.1.3,RADLAN-vlan-MIB::vlanCustomerPortModeMtvList1025to2048,OCTET,read-only,,current,,vlan customer port mode multicast TV list 2. Default value is {0}
.1.3.6.1.4.1.89.48.63.1.4,RADLAN-vlan-MIB::vlanCustomerPortModeMtvList2049to3072,OCTET,read-only,,current,,vlan customer port mode multicast TV list 3. Default value is {0}
.1.3.6.1.4.1.89.48.63.1.5,RADLAN-vlan-MIB::vlanCustomerPortModeMtvList3073to4094,OCTET,read-only,,current,,vlan customer port mode multicast TV list 4. Default value is {0}
.1.3.6.1.4.1.89.48.64,RADLAN-vlan-MIB::vlanSwitchPortModeTable,,not-accessible,,current,,The table defines L3/L2 port context.
.1.3.6.1.4.1.89.48.64.1,RADLAN-vlan-MIB::vlanSwitchPortModeEntry,,not-accessible,ifIndex,current,,The entry contains port ifIndex and switch port enable value.
.1.3.6.1.4.1.89.48.64.1.1,RADLAN-vlan-MIB::vlanSwitchPortModeCategory,INTEGER,read-write,,current,l2(1):l3(2),Indicated if a port is switchport (l2 port) or no switchport (l3 port) 1 - switchport 2 - no switchport. Default is 1
.1.3.6.1.4.1.89.48.65,RADLAN-vlan-MIB::vlanPortModeContextTable,,not-accessible,,current,,The tables contains current port mode context entries.
.1.3.6.1.4.1.89.48.65.1,RADLAN-vlan-MIB::vlanPortModeContextEntry,,not-accessible,ifIndex,current,,The entry contains current port mode context.
.1.3.6.1.4.1.89.48.65.1.1,RADLAN-vlan-MIB::vlanPortModeContextValue,INTEGER,read-write,,current,,Indicated port context value: 0. Lag 1. Monitor 2. L3 3. RAVA 4. Dot1x 5. Dot1q 6. Access 7. Trunk 8. Customer 9. PV_promisc 10. PV_host
.1.3.6.1.4.1.89.48.66,RADLAN-vlan-MIB::vlanRsvlEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable / Disable Shared Vlans at the device.
.1.3.6.1.4.1.89.48.67,RADLAN-vlan-MIB::vlanRsvlMapTable,,not-accessible,,current,,Shared vlan learning mapping table which contains the SVL mapping entries.
.1.3.6.1.4.1.89.48.67.1,RADLAN-vlan-MIB::vlanRsvlMapEntry,,not-accessible,vlanRsvlMapPrimaryVid:vlanRsvlMapSecondaryVid,current,,SVL mapping entry which contains the primary / secondary SVL association.
.1.3.6.1.4.1.89.48.67.1.1,RADLAN-vlan-MIB::vlanRsvlMapPrimaryVid,Unsigned32,not-accessible,,current,,The primary SVL ID which is associated with the secondary shared vlan vlanRsvlMapSecondaryVid.
.1.3.6.1.4.1.89.48.67.1.2,RADLAN-vlan-MIB::vlanRsvlMapSecondaryVid,Unsigned32,not-accessible,,current,,The secondary SVL ID which is associated with the primary shared vlan vlanRsvlMapPrimaryVid.
.1.3.6.1.4.1.89.48.67.1.3,RADLAN-vlan-MIB::vlanRsvlMapStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.48.68,RADLAN-vlan-MIB::rldot1qPortVlanStaticTable,,not-accessible,,current,,A table containing static vlan port membership information.
.1.3.6.1.4.1.89.48.68.1,RADLAN-vlan-MIB::rldot1qPortVlanStaticEntry,,not-accessible,ifIndex,current,,Static vlan membership information per port
.1.3.6.1.4.1.89.48.68.1.1,RADLAN-vlan-MIB::rldot1qPortVlanStaticEgressList1to1024,OCTET,read-write,,current,,The port egress vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.2,RADLAN-vlan-MIB::rldot1qPortVlanStaticEgressList1025to2048,OCTET,read-write,,current,,The port egress vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.3,RADLAN-vlan-MIB::rldot1qPortVlanStaticEgressList2049to3072,OCTET,read-write,,current,,The port egress vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.4,RADLAN-vlan-MIB::rldot1qPortVlanStaticEgressList3073to4094,OCTET,read-write,,current,,The port egress vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.5,RADLAN-vlan-MIB::rldot1qPortVlanStaticUntaggedEgressList1to1024,OCTET,read-write,,current,,The port egress untagged vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.6,RADLAN-vlan-MIB::rldot1qPortVlanStaticUntaggedEgressList1025to2048,OCTET,read-write,,current,,The port egress untagged vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.7,RADLAN-vlan-MIB::rldot1qPortVlanStaticUntaggedEgressList2049to3072,OCTET,read-write,,current,,The port egress untagged vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.8,RADLAN-vlan-MIB::rldot1qPortVlanStaticUntaggedEgressList3073to4094,OCTET,read-write,,current,,The port egress untagged vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.9,RADLAN-vlan-MIB::rldot1qPortVlanStaticForbiddenList1to1024,OCTET,read-write,,current,,The port forbidden vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.10,RADLAN-vlan-MIB::rldot1qPortVlanStaticForbiddenList1025to2048,OCTET,read-write,,current,,The port forbidden vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.11,RADLAN-vlan-MIB::rldot1qPortVlanStaticForbiddenList2049to3072,OCTET,read-write,,current,,The port forbidden vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.68.1.12,RADLAN-vlan-MIB::rldot1qPortVlanStaticForbiddenList3073to4094,OCTET,read-write,,current,,The port forbidden vlan static list.Default value is {0}
.1.3.6.1.4.1.89.48.69,RADLAN-vlan-MIB::rldot1qVlanStaticListTable,,not-accessible,,current,,A table contains only one entry of a static vlan list.
.1.3.6.1.4.1.89.48.69.1,RADLAN-vlan-MIB::rldot1qVlanStaticListEntry,,not-accessible,rldot1qVlanStaticListIndex,current,,Staticly created by local or network management vlan list
.1.3.6.1.4.1.89.48.69.1.1,RADLAN-vlan-MIB::rldot1qVlanStaticListIndex,INTEGER,read-write,,current,static(0),An index is entrie's sequence. The table contains only one static entry.
.1.3.6.1.4.1.89.48.69.1.2,RADLAN-vlan-MIB::rldot1qVlanStaticList1to1024,OCTET,read-write,,current,,A list of staticaly created vlans from 1 to 1024.
.1.3.6.1.4.1.89.48.69.1.3,RADLAN-vlan-MIB::rldot1qVlanStaticList1025to2048,OCTET,read-write,,current,,A list of staticaly created vlans from 1025 to 2048.
.1.3.6.1.4.1.89.48.69.1.4,RADLAN-vlan-MIB::rldot1qVlanStaticList2049to3072,OCTET,read-write,,current,,A list of staticaly created vlans from 2049 to 3072.
.1.3.6.1.4.1.89.48.69.1.5,RADLAN-vlan-MIB::rldot1qVlanStaticList3073to4094,OCTET,read-write,,current,,A list of staticaly created vlans from 3073 to 4094.
.1.3.6.1.4.1.89.48.70,RADLAN-vlan-MIB::rldot1qVlanStaticNameTable,,not-accessible,,current,,A table contains created by user vlans names.
.1.3.6.1.4.1.89.48.70.1,RADLAN-vlan-MIB::rldot1qVlanStaticNameEntry,,not-accessible,dot1qVlanIndex,current,,Staticly created by local or network management vlan list
.1.3.6.1.4.1.89.48.70.1.1,RADLAN-vlan-MIB::rldot1qVlanStaticName,OCTET,read-write,,current,,An administratively assigned string,which may be used to identify the VLAN. The VLAN name must be unique or no name.
.1.3.6.1.4.1.89.48.71,RADLAN-vlan-MIB::rlPortVlanTriplePlayMulticastTvTable,,not-accessible,,current,,A table saves a list of vlans per port/lag.
.1.3.6.1.4.1.89.48.71.1,RADLAN-vlan-MIB::rlPortVlanTriplePlayMulticastTvEntry,,not-accessible,ifIndex,current,,Entry of Triple Play Multicast Tv table.
.1.3.6.1.4.1.89.48.71.1.1,RADLAN-vlan-MIB::rlPortVlanTriplePlayMulticastTvList1to1024,OCTET,read-write,,current,,A list of staticaly created Triple Play MTV vlans from 1 to 1024.
.1.3.6.1.4.1.89.48.71.1.2,RADLAN-vlan-MIB::rlPortVlanTriplePlayMulticastTvList1025to2048,OCTET,read-write,,current,,A list of staticaly created Triple Play MTV vlans from 1025 to 2048.
.1.3.6.1.4.1.89.48.71.1.3,RADLAN-vlan-MIB::rlPortVlanTriplePlayMulticastTvList2049to3072,OCTET,read-write,,current,,A list of staticaly created Triple Play MTV vlans from 2049 to 3072.
.1.3.6.1.4.1.89.48.71.1.4,RADLAN-vlan-MIB::rlPortVlanTriplePlayMulticastTvList3073to4094,OCTET,read-write,,current,,A list of staticaly created Triple Play MTV vlans from 3073 to 4094.
.1.3.6.1.4.1.89.49,RADLAN-MIB::rlRmonControl,,,,,,
.1.3.6.1.4.1.89.49.1,RADLAN-RMON::rlRmonControlMibVersion,INTEGER,read-only,,current,,The MIB's version. The current version is 1
.1.3.6.1.4.1.89.49.2,RADLAN-RMON::rlRmonControlHistoryControlQuotaBucket,INTEGER,read-write,,current,,Maximum number of buckets to be used by each History Control group entry. changed to read only, value is derived from rsMaxRmonEtherHistoryEntrie
.1.3.6.1.4.1.89.49.3,RADLAN-RMON::rlRmonControlHistoryControlMaxGlobalBuckets,INTEGER,read-only,,current,,Maximum number of buckets to be used by all History Control group entries together.
.1.3.6.1.4.1.89.49.4,RADLAN-RMON::rlHistoryControlTable,,not-accessible,,current,,A list of rlHistory control entries. This table is exactly like the corresponding RMON I History control group table, but is used to sample statistics of counters not specified by the RMON I statistics group.
.1.3.6.1.4.1.89.49.4.1,RADLAN-RMON::rlHistoryControlEntry,,not-accessible,rlHistoryControlIndex,current,,A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the rlHistoryControlInterval object might be named rlHistoryControlInterval.2
.1.3.6.1.4.1.89.49.4.1.1,RADLAN-RMON::rlHistoryControlIndex,INTEGER,read-only,,current,,An index that uniquely identifies an entry in the rlHistoryControl table. Each such entry defines a set of samples at a particular interval for a sampled counter.
.1.3.6.1.4.1.89.49.4.1.2,RADLAN-RMON::rlHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in the rlHistory table. This object may not be modified if the associated rlHistoryControlStatus object is equal to valid(1).
.1.3.6.1.4.1.89.49.4.1.3,RADLAN-RMON::rlHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the rlHistory table associated with this rlHistoryControlEntry. When this object is created or modified, the probe should set rlHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.4.1.89.49.4.1.4,RADLAN-RMON::rlHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the rlHistory table associated with this rlHistoryControlEntry. When the associated rlHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated rlHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the rlHistory table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this rlHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the rlHistory table. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated rlHistory table entries may be allowed to grow.
.1.3.6.1.4.1.89.49.4.1.5,RADLAN-RMON::rlHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the rlHistory table associated with this rlHistoryControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow and set the rlHistoryControlInterval object to a value This object may not be modified if the associated rlHistoryControlStatus object is equal to valid(1).
.1.3.6.1.4.1.89.49.4.1.6,RADLAN-RMON::rlHistoryControlOwner,OCTET,read-write,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.4.1.89.49.4.1.7,RADLAN-RMON::rlHistoryControlStatus,INTEGER,read-write,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this rlHistoryControl entry. Each instance of the rlHistory table associated with this rlHistoryControlEntry will be deleted by the agent if this rlHistoryControlEntry is not equal to valid(1).
.1.3.6.1.4.1.89.49.5,RADLAN-RMON::rlHistoryTable,,not-accessible,,current,,A list of history entries.
.1.3.6.1.4.1.89.49.5.1,RADLAN-RMON::rlHistoryEntry,,not-accessible,rlHistoryIndex:rlHistorySampleIndex,current,,An historical statistics sample of a counter specified by the corresponding history control entry. This sample is associated with the rlHistoryControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the rlHistoryPkts object might be named rlHistoryPkts.2.89
.1.3.6.1.4.1.89.49.5.1.1,RADLAN-RMON::rlHistoryIndex,INTEGER,read-only,,current,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of rlHistoryControlIndex.
.1.3.6.1.4.1.89.49.5.1.2,RADLAN-RMON::rlHistorySampleIndex,INTEGER,read-only,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same rlHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.4.1.89.49.5.1.3,RADLAN-RMON::rlHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.4.1.89.49.5.1.4,RADLAN-RMON::rlHistoryValue,Counter32,read-only,,current,,The value of the sampled counter at the time of this sampling.
.1.3.6.1.4.1.89.49.6,RADLAN-RMON::rlControlHistoryControlQuotaBucket,INTEGER,read-write,,current,,Maximum number of buckets to be used by each rlHistoryControlTable entry.
.1.3.6.1.4.1.89.49.7,RADLAN-RMON::rlControlHistoryControlMaxGlobalBuckets,INTEGER,read-write,,current,,Maximum number of buckets to be used by all rlHistoryControlTable entries together.
.1.3.6.1.4.1.89.49.8,RADLAN-RMON::rlControlHistoryMaxEntries,INTEGER,read-write,,current,,Maximum number of rlHistoryTable entries.
.1.3.6.1.4.1.89.50,RADLAN-MIB::rlBrgMacSwitch,,,,,,
.1.3.6.1.4.1.89.50.1,RADLAN-MIB::rlBrgMacSwVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 2.
.1.3.6.1.4.1.89.50.2,RADLAN-MIB::rlBrgMacSwMaxTableNumber,INTEGER,read-only,,mandatory,,Maximum number of MAC Tables supported by the device.
.1.3.6.1.4.1.89.50.3,RADLAN-MIB::rlBrgMacSwDynamicTables,INTEGER,read-only,,mandatory,supported(1):unsupported(2),Specifies whether the device supports port dynamic MAC tables.
.1.3.6.1.4.1.89.50.5,RADLAN-MIB::rlBrgMacSwOldEntryDeleteMode,INTEGER,read-only,,mandatory,refreshFlag(1):agingFlag(2):agingTime(3):boundaries(4),The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, when it learns the station once more. aging_flag: The high level clears a flag when it adds or updates an entry, the Switch sets the flag each time, when it learns the station once more. aging_time: The high level defines a timeout, the Switch sends a message to the high level each time when the station doesn't send messages during interval between timeout and 2*timeout. Boundaries: The Switch doesn't support any mechanism, and the high level uses two boundaries: red and yellow. When the number of entries exceeds the red boundary, the high level deletes the oldest entries.
.1.3.6.1.4.1.89.50.6,RADLAN-MIB::rlBrgMacSwSpanningTree,INTEGER,read-only,,mandatory,supported(1):unsupported(2),Specifies whether the device supports port the Spanning Tree Protocol.
.1.3.6.1.4.1.89.50.7,RADLAN-MIB::rlBrgMacSwKeyType,INTEGER,read-only,,mandatory,macOnly(1):tagAndMac(2),Specified the used MAC Address Table kye format: macOnly: One global MAC Address Table per device (leaky VLANs). tagAndMac: MAC Address Table per each VLAN (strick VLANs).
.1.3.6.1.4.1.89.50.8,RADLAN-MIB::rlBrgMacSwYellowBoundary,INTEGER,read-write,,mandatory,,The yellow boundary.
.1.3.6.1.4.1.89.50.9,RADLAN-MIB::rlBrgMacSwRedBoundary,INTEGER,read-write,,mandatory,,The yellow boundary.
.1.3.6.1.4.1.89.50.10,RADLAN-MIB::rlBrgMacSwTrapEnable,INTEGER,read-write,,mandatory,true(1):false(2),This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain.
.1.3.6.1.4.1.89.50.11,RADLAN-MIB::rlBrgMacSwOperTrapCount,INTEGER,read-only,,mandatory,,This variable indicates the trap counter status (i.e. number of received MAC addresses since the last trap sent that haven't been inserted into the hash). It is relevant only when trap is enabled.
.1.3.6.1.4.1.89.50.12,RADLAN-MIB::rlBrgMacSwAdminTrapFrequency,INTEGER,read-write,,mandatory,,This variable indicates the minimal frequency (in seconds) of sending a trap. It is relevant only when trap is enabled.
.1.3.6.1.4.1.89.51,RADLAN-MIB::rlExperience,,,,,,
.1.3.6.1.4.1.89.52,RADLAN-MIB::rlCli,,,,,,
.1.3.6.1.4.1.89.52.1,RADLAN-MIB::rlCliMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.52.2,RADLAN-MIB::rlCliPassword,OCTET,read-write,,mandatory,,CLI Password
.1.3.6.1.4.1.89.52.3,RADLAN-MIB::rlCliTimer,INTEGER,read-write,,mandatory,,CLI Timer
.1.3.6.1.4.1.89.52.4,RADLAN-MIB::rlCliFileEnable,INTEGER,read-only,,mandatory,true(1):false(2),CLI File Enable/Disable
.1.3.6.1.4.1.89.52.5,RADLAN-MIB::rlCliFileEnableAfterReset,INTEGER,read-write,,mandatory,true(1):false(2),CLI File Enable/Disable After Reset
.1.3.6.1.4.1.89.53,RADLAN-MIB::rlPhysicalDescription,,,,,,
.1.3.6.1.4.1.89.53.1,RADLAN-Physicaldescription-MIB::rlPhdMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 3. 1: original version 2: a. new tables rlPhdModuleHotSwapTable rlPhdStackOrderTable b. new scalars rlPhdStackReorder rlPhdNumberOfUnits rlPhdMaxNumberOfUnits 3: a. new field rlPhdModuleRole of rlPhdModuleTable b. new scalars rlPhdForceMasterUnit 4: a. new fields rlPhdModuleConnect1 and rlPhdModuleConnect2 of rlPhdModuleTable. 5: a. Prefix rlPhD were replaced by prefix rlPhd b. fields rlPhdModuleConnect1 and rlPhdModuleConnect2 are moved from rlPhdModuleTable to rlPhdStackTable. c. new fiels rlPhdStackSofrwareVer, rlPhdStackProductID and rlPhdStackMacAddr of rlPhdStackTable. d. new scalars rlPhdStackReloadUnit e. new scalars rlPhdStackOrderTopUnit rlPhdStackOrderBottomUnit rlPhdStackOrderPermutation
.1.3.6.1.4.1.89.53.2,RADLAN-Physicaldescription-MIB::rlPhdModuleTable,,not-accessible,,current,,For each module (board) there is an entry describing it in this module
.1.3.6.1.4.1.89.53.2.1,RADLAN-Physicaldescription-MIB::rlPhdModuleEntry,,not-accessible,rlPhdModuleStackUnit:rlPhdModuleIndex,current,,A entry of this table specifies a module (board)
.1.3.6.1.4.1.89.53.2.1.1,RADLAN-Physicaldescription-MIB::rlPhdModuleStackUnit,INTEGER,read-only,,current,,The stack unit to which this module belongs.
.1.3.6.1.4.1.89.53.2.1.2,RADLAN-Physicaldescription-MIB::rlPhdModuleIndex,INTEGER,read-only,,current,,The number of the module in its stack unit
.1.3.6.1.4.1.89.53.2.1.3,RADLAN-Physicaldescription-MIB::rlPhdModuleType,INTEGER,read-only,,current,,The module type: 1 - unknown 2 - extension 3 - acceleratorOpal 4 - acceleratorHertz3 5 - acceleratorUhual3 6 - hertz2 7 - uhual2 8 - hertz3 9 - uhual3ge 10 - uhual3sonet 11 - uhual3atm 12 - bcm2402 13 - lg8-0 14 - lg16-0 15 - lg8-1 16 - hertz2plus 17 - uhual2plus 18 - 2 98MX620 19 - 2 98EX120 20 - 1 98EX110 21 - two herz3 copper 22 - two uhaul3 fiber SX 23 - two uhaul3 copper 24 - hertz3 fiber 25 - two uhaul3 gibic 26 - two herz3 fiber 27 - two uhaul3 fiber LX 28 - bcm5615 stackable 24 29 - bcm5625x2 stackable 48 30 - EX125D-24 Giga ports 31 - EX115D-48 Fast 4 Giga 32 - SICC 4 copper ports 33 - SICC 4 fiber ports 34 - SICC gbic ports 35 - VesuvioT 36 - VesuvioF 37 - 98DX160 38 - 98DX240 39 - 98DX162 40 - 98DX242 41 - Gemstones Sapphire only 42 - Gemstones 24F+4G 43 - Gemstones 48F+4G 44 - Cheetah 24G + 3XG 45 - Cheetah 48G stacking
.1.3.6.1.4.1.89.53.2.1.4,RADLAN-Physicaldescription-MIB::rlPhdModuleStartingPort,INTEGER,read-only,,current,,The minimal number of the port residing on this module.
.1.3.6.1.4.1.89.53.2.1.5,RADLAN-Physicaldescription-MIB::rlPhdModuleNumberOfPorts,INTEGER,read-only,,current,,The number of ports residing on this module.
.1.3.6.1.4.1.89.53.2.1.6,RADLAN-Physicaldescription-MIB::rlPhdModuleRow,INTEGER,read-only,,current,,On which row (the uppermost being numbered 1 and the highest row number asigned to the lowest row) this module resides within the chassis of its stack unit.
.1.3.6.1.4.1.89.53.2.1.7,RADLAN-Physicaldescription-MIB::rlPhdModuleColumn,INTEGER,read-only,,current,,On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this module resides within the chassis of its stack unit.
.1.3.6.1.4.1.89.53.2.1.8,RADLAN-Physicaldescription-MIB::rlPhdModuleRole,INTEGER,read-only,,current,standalone(1):master(2):backup(3):slave(4),The module role in the stack.
.1.3.6.1.4.1.89.53.3,RADLAN-Physicaldescription-MIB::rlPhdPortsTable,,not-accessible,,current,,Lists the physical or physical-related attributes of ports
.1.3.6.1.4.1.89.53.3.1,RADLAN-Physicaldescription-MIB::rlPhdPortsEntry,,not-accessible,rlPhdPortsIfIndex,current,,For each port, a entry describing attributes which are either physical or are derived from the features of the device hardware
.1.3.6.1.4.1.89.53.3.1.1,RADLAN-Physicaldescription-MIB::rlPhdPortsIfIndex,INTEGER,read-only,,current,,The L2 interface number associated with this port.
.1.3.6.1.4.1.89.53.3.1.2,RADLAN-Physicaldescription-MIB::rlPhdPortsIfIndexName,OCTET,read-only,,current,,The L2 interface number associated with this port, in string format based on the overall hardware architecture of the device (i.e., for monolithic devices just numbers, devices composed of modules (boards, cards) or stackable devices composed of monolithic units in form <module /stack unit number> - <port number on current module /stack unit number>, stackable devices in which each unit is composed of modules <stack unit number> - <module number> - <port number>
.1.3.6.1.4.1.89.53.3.1.3,RADLAN-Physicaldescription-MIB::rlPhdPortsMediaType,INTEGER,read-only,,current,copper(1):optic-fiber(2):combo(3),The media type of this port.
.1.3.6.1.4.1.89.53.3.1.4,RADLAN-Physicaldescription-MIB::rlPhdPortsStackUnit,INTEGER,read-only,,current,,The number of the stack unit to which this port belongs.
.1.3.6.1.4.1.89.53.3.1.5,RADLAN-Physicaldescription-MIB::rlPhdPortsModuleNumber,INTEGER,read-only,,current,,The number of the module to which this port belongs.
.1.3.6.1.4.1.89.53.3.1.6,RADLAN-Physicaldescription-MIB::rlPhdPortsRow,INTEGER,read-only,,current,,On which row (the uppermost being numbered 1 and the highest row number asigned to the lowest row) this port resides within its module.
.1.3.6.1.4.1.89.53.3.1.7,RADLAN-Physicaldescription-MIB::rlPhdPortsColumn,INTEGER,read-only,,current,,On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this this port resides within its module.
.1.3.6.1.4.1.89.53.3.1.8,RADLAN-Physicaldescription-MIB::rlPhdConnectorType,INTEGER,read-only,,current,other(1):rj45(2):rj45S(3):db9(4):bnc(5):fAUI(6):mAUI(7):fiberSC(8):fiberMIC(9):fiberST(10):telco(11):mtrj(12):hssdc(13):fiberLC(14),Type of connector.
.1.3.6.1.4.1.89.53.3.1.9,RADLAN-Physicaldescription-MIB::rlPhdPortHaul,INTEGER,read-only,,current,not-relevant(1):short(2):long(3),Distance supported by this port.
.1.3.6.1.4.1.89.53.4,RADLAN-Physicaldescription-MIB::rlPhdStackTable,,not-accessible,,current,,For each stack unit there is an entry describing it in this table
.1.3.6.1.4.1.89.53.4.1,RADLAN-Physicaldescription-MIB::rlPhdStackEntry,,not-accessible,rlPhdStackUnit,current,,A entry of this table specifies a stack unit
.1.3.6.1.4.1.89.53.4.1.1,RADLAN-Physicaldescription-MIB::rlPhdStackUnit,INTEGER,read-only,,current,,The stack unit described by this entry.
.1.3.6.1.4.1.89.53.4.1.2,RADLAN-Physicaldescription-MIB::rlPhdStackType,INTEGER,read-only,,current,,The type of the stack unit described by this entry: 1 - box 3202 2 - box LG 3 - bcm 4 - prestera
.1.3.6.1.4.1.89.53.4.1.3,RADLAN-Physicaldescription-MIB::rlPhdStackConnect1,INTEGER,read-only,,current,,The unit number connected to the Hyper GLink left side connection - 0 means not connected; other integer indicates the unit number.
.1.3.6.1.4.1.89.53.4.1.4,RADLAN-Physicaldescription-MIB::rlPhdStackConnect2,INTEGER,read-only,,current,,The unit number connected to the Hyper GLink right side connection - 0 means not connected; other integer indicates the unit number.
.1.3.6.1.4.1.89.53.4.1.5,RADLAN-Physicaldescription-MIB::rlPhdStackSofrwareVer,OCTET,read-only,,current,,The Software version of the unit.
.1.3.6.1.4.1.89.53.4.1.6,RADLAN-Physicaldescription-MIB::rlPhdStackProductID,OCTET,read-only,,current,,The Product ID of the unit.
.1.3.6.1.4.1.89.53.4.1.7,RADLAN-Physicaldescription-MIB::rlPhdStackMacAddr,OCTET,read-only,,current,,The physical (MAC) address of the unit.
.1.3.6.1.4.1.89.53.5,RADLAN-Physicaldescription-MIB::rlPhdModuleHotSwapTable,,not-accessible,,current,,For each module (board) there is an entry describing its Hot Swap status
.1.3.6.1.4.1.89.53.5.1,RADLAN-Physicaldescription-MIB::rlPhdModuleHotSwapEntry,,not-accessible,rlPhdModuleStackUnit:rlPhdModuleIndex,current,,A entry of this table specifies a module (board) Hot Swap status
.1.3.6.1.4.1.89.53.5.1.1,RADLAN-Physicaldescription-MIB::rlPhdModuleHotSwapAdminStatus,INTEGER,read-write,,current,on(1):off(2),The desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state indicates that the module may be used and its rlPhdModuleHotSwapOperStatus will be on(1) if it presents and off(2) if it does not present.
.1.3.6.1.4.1.89.53.5.1.2,RADLAN-Physicaldescription-MIB::rlPhdModuleHotSwapOperStatus,INTEGER,read-only,,current,on(1):off(2),The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and only if the module does not present.
.1.3.6.1.4.1.89.53.6,RADLAN-Physicaldescription-MIB::rlPhdStackOrderTable,,not-accessible,,current,,This table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last configured order. If the stack units order was never configured, the order will be the same as in the rlPhdStackTable.
.1.3.6.1.4.1.89.53.6.1,RADLAN-Physicaldescription-MIB::rlPhdStackOrderEntry,,not-accessible,rlPhdStackOrderCurrentUnitPosition,current,,A entry of this table specifies a stack unit in the position desired by the user
.1.3.6.1.4.1.89.53.6.1.1,RADLAN-Physicaldescription-MIB::rlPhdStackOrderCurrentUnitPosition,INTEGER,not-accessible,,current,,The current stack unit position.
.1.3.6.1.4.1.89.53.6.1.2,RADLAN-Physicaldescription-MIB::rlPhdStackOrderDesiredUnitPosition,INTEGER,read-write,,current,,The desired stack unit position. Note that setting this MIB object will take effect only after setting the rlPhdStackReorder MIB object below. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same.
.1.3.6.1.4.1.89.53.6.1.3,RADLAN-Physicaldescription-MIB::rlPhdStackOrderUnitIndex,INTEGER,not-accessible,,current,,This is the original unit index, i.e. has the same value as rlPhdStackUnit above.
.1.3.6.1.4.1.89.53.6.1.4,RADLAN-Physicaldescription-MIB::rlPhdStackOrderUnitType,INTEGER,read-only,,current,,The type of the stack unit described by this entry. It has the same value as rlPhdStackType above. This information is duplicated here only for easier retrieval by the device manager.
.1.3.6.1.4.1.89.53.7,RADLAN-Physicaldescription-MIB::rlPhdStackReorder,INTEGER,read-write,,current,reorder(1),Setting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same.
.1.3.6.1.4.1.89.53.8,RADLAN-Physicaldescription-MIB::rlPhdNumberOfUnits,INTEGER,read-only,,current,,Shows the current number of units in the stack.
.1.3.6.1.4.1.89.53.9,RADLAN-Physicaldescription-MIB::rlPhdMaxNumberOfUnits,INTEGER,read-only,,current,,Shows the maximum number of units in the stack.
.1.3.6.1.4.1.89.53.10,RADLAN-Physicaldescription-MIB::rlPhdForceMasterUnit,INTEGER,read-write,,current,,Force unit to be master.
.1.3.6.1.4.1.89.53.11,RADLAN-Physicaldescription-MIB::rlPhdStackFixedUnit,INTEGER,read-write,,current,,Determine which unit will be on bottom/top of list on Show-List command(see .
.1.3.6.1.4.1.89.53.12,RADLAN-Physicaldescription-MIB::rlPhdStackFixedUnitLocation,INTEGER,read-write,,current,bottom(1):top(2),Determine the bottom/top object in the stack table.
.1.3.6.1.4.1.89.53.13,RADLAN-Physicaldescription-MIB::rlPhdStackReloadUnit,INTEGER,read-write,,current,,Reset a specific unit.
.1.3.6.1.4.1.89.53.14,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamTable,,not-accessible,,current,,For each module (board) there is an entry describing it in this module
.1.3.6.1.4.1.89.53.14.1,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamEntry,,not-accessible,rlPhdUnitGenParamStackUnit,current,,A entry of this table specifies a module (board)
.1.3.6.1.4.1.89.53.14.1.1,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamStackUnit,INTEGER,read-only,,current,,The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product.
.1.3.6.1.4.1.89.53.14.1.2,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamSoftwareVersion,OCTET,read-only,,current,,Serial number of the product.
.1.3.6.1.4.1.89.53.14.1.3,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamFirmwareVersion,OCTET,read-only,,current,,Serial number of the product.
.1.3.6.1.4.1.89.53.14.1.4,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamHardwareVersion,OCTET,read-only,,current,,Serial number of the product.
.1.3.6.1.4.1.89.53.14.1.5,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamSerialNum,OCTET,read-only,,current,,Serial number of the product.
.1.3.6.1.4.1.89.53.14.1.6,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamAssetTag,OCTET,read-write,,current,,Serial number of the product.
.1.3.6.1.4.1.89.53.14.1.7,RADLAN-Physicaldescription-MIB::rlPhdUnitGenParamServiceTag,OCTET,read-only,,current,,Asset tag of the product.
.1.3.6.1.4.1.89.53.15,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamTable,,not-accessible,,current,,For each module (board) there is an entry describing it in this module
.1.3.6.1.4.1.89.53.15.1,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamEntry,,not-accessible,rlPhdUnitEnvParamStackUnit,current,,A entry of this table specifies a module (board)
.1.3.6.1.4.1.89.53.15.1.1,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamStackUnit,INTEGER,read-only,,current,,The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product.
.1.3.6.1.4.1.89.53.15.1.2,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamMainPSStatus,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the main PS being instrumented.
.1.3.6.1.4.1.89.53.15.1.3,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamRedundantPSStatus,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the redundant PS being instrumented.
.1.3.6.1.4.1.89.53.15.1.4,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamFan1Status,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the FAN 1 being instrumented.
.1.3.6.1.4.1.89.53.15.1.5,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamFan2Status,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the FAN 2 being instrumented.
.1.3.6.1.4.1.89.53.15.1.6,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamFan3Status,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the FAN 3 being instrumented.
.1.3.6.1.4.1.89.53.15.1.7,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamFan4Status,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the FAN 4 being instrumented.
.1.3.6.1.4.1.89.53.15.1.8,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamFan5Status,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the FAN 5 being instrumented.
.1.3.6.1.4.1.89.53.15.1.9,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamTempSensorValue,Integer32,read-only,,current,,Current value for the Sensor being instrumented.
.1.3.6.1.4.1.89.53.15.1.10,RADLAN-Physicaldescription-MIB::rlPhdUnitEnvParamTempSensorStatus,INTEGER,read-only,,current,ok(1):unavailable(2):nonoperational(3),Status value for the Sensor being instrumented.
.1.3.6.1.4.1.89.53.16,RADLAN-Physicaldescription-MIB::rlPhdStackOrderTopUnit,INTEGER,read-write,,current,,This scalar mib holds the Top unit for the stack order command
.1.3.6.1.4.1.89.53.17,RADLAN-Physicaldescription-MIB::rlPhdStackOrderBottomUnit,INTEGER,read-write,,current,,This scalar mib holds the Bottom unit for the stack order command
.1.3.6.1.4.1.89.53.18,RADLAN-Physicaldescription-MIB::rlPhdStackOrderPermutation,OCTET,read-write,,current,,This scalar mib holds stack permutation
.1.3.6.1.4.1.89.54,RADLAN-MIB::rlIfInterfaces,,,,,,
.1.3.6.1.4.1.89.54.1,RADLAN-rlInterfaces::rlIfMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.54.2,RADLAN-rlInterfaces::rlIfNumOfPhPorts,INTEGER,read-only,,current,,Total number of physical ports on this device (including all stack units)
.1.3.6.1.4.1.89.54.3,RADLAN-rlInterfaces::rlIfMapOfOnPhPorts,OCTET,read-only,,current,,Each bit in this octet string indicates that the correspondig port's ifOperStatus is ON if set. The mapping of port number to bits in this octet string is as follows: The port with the L2 interface number 1 is mapped to the least significant bit of the 1st octet, the port with L2 ifNumber 2 to the next significant bit in the 1st octet, port 8 to the most-significant bit of the in the 1st octet, port 9 to the least significant bit of the 2nd octet, etc. and in general, port n to bit corresponding to 2**((n mod 8) -1) in byte n/8 + 1
.1.3.6.1.4.1.89.54.4,RADLAN-rlInterfaces::rlIfClearPortMibCounters,OCTET,read-write,,current,,Each bit that is set in this portList represent a port that its mib counters should be reset.
.1.3.6.1.4.1.89.54.5,RADLAN-rlInterfaces::rlIfNumOfUserDefinedPorts,INTEGER,read-only,,current,,The number of user defined ports on this device.
.1.3.6.1.4.1.89.54.6,RADLAN-rlInterfaces::rlIfFirstOutOfBandIfIndex,INTEGER,read-only,,current,,First ifIndex of out-of-band port. This scalar exists only the device has out of band ports.
.1.3.6.1.4.1.89.54.7,RADLAN-rlInterfaces::rlIfNumOfLoopbackPorts,INTEGER,read-only,,current,,The number of loopback ports on this device.
.1.3.6.1.4.1.89.54.8,RADLAN-rlInterfaces::rlIfFirstLoopbackIfIndex,INTEGER,read-only,,current,,First ifIndex of loopback port. This scalar will exists only if rlIfNumOfLoopbackPorts is different from 0.
.1.3.6.1.4.1.89.54.9,RADLAN-rlInterfaces::rlIfExistingPortList,OCTET,read-only,,current,,Indicates which ports/trunks exist in the system. It doesn't indicate which are present.
.1.3.6.1.4.1.89.55,RADLAN-MIB::rlMacMulticast,,,,,,
.1.3.6.1.4.1.89.55.1,RADLAN-MIB::rlMacMulticastEnable,INTEGER,read-write,,mandatory,true(1):false(2),Enable/Disable MAC Multicast bridging in the device.
.1.3.6.1.4.1.89.55.2,RADLAN-MIB::rlIgmpSnoop,,,,,,
.1.3.6.1.4.1.89.55.2.1,RADLAN-MIB::rlIgmpSnoopMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 2. The addition is that IGMP Snooping is per vlan instead of per device. There are additional timers to the protocol: leave time-out and query time-out. 
.1.3.6.1.4.1.89.55.2.2,RADLAN-MIB::rlIgmpSnoopEnable,INTEGER,read-write,,mandatory,true(1):false(2),Enable/Disable IGMP Snooping in the switch.
.1.3.6.1.4.1.89.55.2.3,RADLAN-MIB::rlIgmpSnoopHostAgingTime,INTEGER,read-write,,mandatory,,The amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable will be aged out.
.1.3.6.1.4.1.89.55.2.4,RADLAN-MIB::rlIgmpSnoopRouterAgingTime,INTEGER,read-write,,mandatory,,The amount of time that should pass before aging out an entry in the rlIgmpSnoopInterfaceTable will be aged out.
.1.3.6.1.4.1.89.55.2.5,RADLAN-MIB::rlIgmpSnoopGroupTable,,not-accessible,,mandatory,,The (conceptual) table listing the IP multicast groups for which there are members on a particular interface.
.1.3.6.1.4.1.89.55.2.5.1,RADLAN-MIB::rlIgmpSnoopGroupEntry,,not-accessible,rlIgmpSnoopGroupTag:rlIgmpSnoopGroupAddress:rlIgmpSnoopGroupPort,mandatory,,An entry (conceptual row) in the rlIgmpSnoopGroupTable.
.1.3.6.1.4.1.89.55.2.5.1.1,RADLAN-MIB::rlIgmpSnoopGroupTag,INTEGER,read-only,,mandatory,,The VLAN tag for which this entry contains information for an IP multicast group address.
.1.3.6.1.4.1.89.55.2.5.1.2,RADLAN-MIB::rlIgmpSnoopGroupAddress,,read-only,,mandatory,,The MAC multicast group address for which this entry contains information.
.1.3.6.1.4.1.89.55.2.5.1.3,RADLAN-MIB::rlIgmpSnoopGroupPort,INTEGER,read-only,,mandatory,,The ifIndex value of the port for which this entry contains information for an IP multicast group address.
.1.3.6.1.4.1.89.55.2.5.1.4,RADLAN-MIB::rlIgmpSnoopGroupExpiryTime,INTEGER,read-only,,mandatory,,The minimum amount of time remaining before this entry will aged out.
.1.3.6.1.4.1.89.55.2.6,RADLAN-MIB::rlIgmpSnoopRouterTable,,not-accessible,,mandatory,,The (conceptual) table listing the ports for which there are IP Multicast Routers.
.1.3.6.1.4.1.89.55.2.6.1,RADLAN-MIB::rlIgmpSnoopRouterEntry,,not-accessible,rlIgmpSnoopRouterTag:rlIgmpSnoopRouterPort,mandatory,,An entry (conceptual row) in the rlIgmpSnoopRouterTable.
.1.3.6.1.4.1.89.55.2.6.1.1,RADLAN-MIB::rlIgmpSnoopRouterTag,INTEGER,read-only,,mandatory,,The tag of the VLAN for which this entry contains information for an IP Multicast Router.
.1.3.6.1.4.1.89.55.2.6.1.2,RADLAN-MIB::rlIgmpSnoopRouterPort,INTEGER,read-only,,mandatory,,The interface for which this entry contains information for an IP multicast Router.
.1.3.6.1.4.1.89.55.2.6.1.3,RADLAN-MIB::rlIgmpSnoopRouterExpiryTime,INTEGER,read-only,,mandatory,,The minimum amount of time remaining before this entry will aged out.
.1.3.6.1.4.1.89.55.2.7,RADLAN-MIB::rlIgmpSnoopVlanTable,,not-accessible,,mandatory,,The table listing the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports.
.1.3.6.1.4.1.89.55.2.7.1,RADLAN-MIB::rlIgmpSnoopVlanEntry,,not-accessible,rlIgmpSnoopVlanTag,mandatory,,An entry (conceptual row) in the rlIgmpSnoopVlanTable.
.1.3.6.1.4.1.89.55.2.7.1.1,RADLAN-MIB::rlIgmpSnoopVlanTag,INTEGER,read-only,,mandatory,,The tag of the VLAN for which this entry contains information for an IP Multicast Router.
.1.3.6.1.4.1.89.55.2.7.1.2,RADLAN-MIB::rlIgmpSnoopVlanEnable,INTEGER,read-write,,mandatory,true(1):false(2),Enable/Disable IGMP Snooping in the vlan.
.1.3.6.1.4.1.89.55.2.7.1.3,RADLAN-MIB::rlIgmpSnoopVlanRouterLearn,INTEGER,read-write,,mandatory,true(1):false(2),Enable/Disable of Learning of routers in the vlan.
.1.3.6.1.4.1.89.55.2.7.1.4,RADLAN-MIB::rlIgmpSnoopVlanHostTimeOut,INTEGER,read-write,,mandatory,,The amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable for this vlan.
.1.3.6.1.4.1.89.55.2.7.1.5,RADLAN-MIB::rlIgmpSnoopVlanQuerierTimeOut,INTEGER,read-write,,mandatory,,The amount of time that should pass before aging out an entry in the rlIgmpSnoopRouterTable for this vlan.
.1.3.6.1.4.1.89.55.2.7.1.6,RADLAN-MIB::rlIgmpSnoopVlanRouterTimeOut,INTEGER,read-write,,mandatory,,The amount of time that should pass before aging out an entry in the rlIgmpSnoopRouterTable for this vlan.
.1.3.6.1.4.1.89.55.2.7.1.7,RADLAN-MIB::rlIgmpSnoopVlanLeaveTimeOut,INTEGER,read-write,,mandatory,,The amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable for this vlan, after recieving a leave message from the port of the entry.
.1.3.6.1.4.1.89.55.2.8,RADLAN-MIB::rlIgmpSnoopIGMP224ReportsHandle,INTEGER,read-write,,mandatory,allow(1):ignore(2),This varaiable indicates whether to allow IGMP reports for groups in the 224.0.0.X range when the group address is already manually configured or to ignore.
.1.3.6.1.4.1.89.55.2.9,RADLAN-MIB::rlIgmpSnoopMrouterEnabled,INTEGER,read-only,,mandatory,true(1):false(2),Indicates whether the device functions as a multicast router.
.1.3.6.1.4.1.89.55.3,RADLAN-MIB::rlMacMulticastMaxEntriesNum,INTEGER,read-only,,mandatory,,The maximum number of Mac Multicast entries the device supports.
.1.3.6.1.4.1.89.56,RADLAN-MIB::rlGalileo,,,,,,
.1.3.6.1.4.1.89.57,RADLAN-MIB::rlpBridgeMIBObjects,,,,,,
.1.3.6.1.4.1.89.57.1,RADLAN-MIB::rldot1dPriority,,,,,,
.1.3.6.1.4.1.89.57.1.1,RADLAN-MIB::rldot1dPriorityMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.57.1.2,RADLAN-MIB::rldot1dPriorityPortGroupTable,,not-accessible,,mandatory,,A list of PortGroupNumber for each port.
.1.3.6.1.4.1.89.57.1.2.1,RADLAN-MIB::rldot1dPriorityPortGroupEntry,,not-accessible,dot1dBasePort,mandatory,,All ports belonging to a same group have the same User Priority to Traffic Class mapping.
.1.3.6.1.4.1.89.57.1.2.1.1,RADLAN-MIB::rldot1dPriorityPortGroupNumber,INTEGER,read-only,,mandatory,,A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping.
.1.3.6.1.4.1.89.57.2,RADLAN-MIB::rldot1dStp,,,,,,
.1.3.6.1.4.1.89.57.2.1,RADLAN-MIB::rldot1dStpMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 2.
.1.3.6.1.4.1.89.57.2.2,RADLAN-MIB::rldot1dStpType,INTEGER,read-only,,mandatory,perDevice(1):mstp(4),Specifies whether the device supports Spanning Tree per device, or per group.
.1.3.6.1.4.1.89.57.2.3,RADLAN-MIB::rldot1dStpEnable,INTEGER,read-write,,mandatory,true(1):false(2),Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.
.1.3.6.1.4.1.89.57.2.4,RADLAN-MIB::rldot1dStpPortMustBelongToVlan,INTEGER,read-write,,mandatory,true(1):false(2),Specifies whether a port must belong to a VLAN in order to participate in the STP.
.1.3.6.1.4.1.89.57.2.5,RADLAN-MIB::rldot1dStpExtendedPortNumberFormat,INTEGER,read-write,,mandatory,true(1):false(2),Specifies whether the STP uses the extended port fnumber format.
.1.3.6.1.4.1.89.57.2.6,RADLAN-MIB::rldot1dStpVlanTable,,not-accessible,,mandatory,,A table that contains vlan-specific information for the Spanning Tree Protocol.
.1.3.6.1.4.1.89.57.2.6.1,RADLAN-MIB::rldot1dStpVlanEntry,,not-accessible,rldot1dStpVlan,mandatory,,A list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan.
.1.3.6.1.4.1.89.57.2.6.1.1,RADLAN-MIB::rldot1dStpVlan,INTEGER,read-only,,mandatory,,The Vlan index.
.1.3.6.1.4.1.89.57.2.6.1.2,RADLAN-MIB::rldot1dStpVlanEnable,INTEGER,read-write,,mandatory,true(1):false(2),Specifies whether this vlan is STP enable or disable
.1.3.6.1.4.1.89.57.2.6.1.3,RADLAN-MIB::rldot1dStpTimeSinceTopologyChange,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
.1.3.6.1.4.1.89.57.2.6.1.4,RADLAN-MIB::rldot1dStpTopChanges,Counter32,read-only,,mandatory,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
.1.3.6.1.4.1.89.57.2.6.1.5,RADLAN-MIB::rldot1dStpDesignatedRoot,OCTET,read-only,,mandatory,,The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.4.1.89.57.2.6.1.6,RADLAN-MIB::rldot1dStpRootCost,INTEGER,read-only,,mandatory,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.4.1.89.57.2.6.1.7,RADLAN-MIB::rldot1dStpRootPort,INTEGER,read-only,,mandatory,,The port number of the port which offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.4.1.89.57.2.6.1.8,RADLAN-MIB::rldot1dStpMaxAge,Integer32,read-only,,mandatory,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.89.57.2.6.1.9,RADLAN-MIB::rldot1dStpHelloTime,Integer32,read-only,,mandatory,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.89.57.2.6.1.10,RADLAN-MIB::rldot1dStpHoldTime,INTEGER,read-only,,mandatory,,This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.4.1.89.57.2.6.1.11,RADLAN-MIB::rldot1dStpForwardDelay,Integer32,read-only,,mandatory,,This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.4.1.89.57.2.7,RADLAN-MIB::rldot1dStpVlanPortTable,,not-accessible,,mandatory,,A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol.
.1.3.6.1.4.1.89.57.2.7.1,RADLAN-MIB::rldot1dStpVlanPortEntry,,not-accessible,rldot1dStpVlanPortVlan:rldot1dStpVlanPortPort,mandatory,,A list of information maintained by every pair <vlan, port> about the Spanning Tree Protocol state for that pair.
.1.3.6.1.4.1.89.57.2.7.1.1,RADLAN-MIB::rldot1dStpVlanPortVlan,INTEGER,read-only,,mandatory,,The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.2.7.1.2,RADLAN-MIB::rldot1dStpVlanPortPort,INTEGER,read-only,,mandatory,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.2.7.1.3,RADLAN-MIB::rldot1dStpVlanPortPriority,INTEGER,read-write,,mandatory,,The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rldot1dStpVlanPort.
.1.3.6.1.4.1.89.57.2.7.1.4,RADLAN-MIB::rldot1dStpVlanPortState,INTEGER,read-only,,mandatory,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6),The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
.1.3.6.1.4.1.89.57.2.7.1.5,RADLAN-MIB::rldot1dStpVlanPortEnable,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The enabled/disabled status of the port.
.1.3.6.1.4.1.89.57.2.7.1.6,RADLAN-MIB::rldot1dStpVlanPortPathCost,INTEGER,read-write,,mandatory,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
.1.3.6.1.4.1.89.57.2.7.1.7,RADLAN-MIB::rldot1dStpVlanPortDesignatedRoot,OCTET,read-only,,mandatory,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.4.1.89.57.2.7.1.8,RADLAN-MIB::rldot1dStpVlanPortDesignatedCost,INTEGER,read-only,,mandatory,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.4.1.89.57.2.7.1.9,RADLAN-MIB::rldot1dStpVlanPortDesignatedBridge,OCTET,read-only,,mandatory,,The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.4.1.89.57.2.7.1.10,RADLAN-MIB::rldot1dStpVlanPortDesignatedPort,OCTET,read-only,,mandatory,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.4.1.89.57.2.7.1.11,RADLAN-MIB::rldot1dStpVlanPortForwardTransitions,Counter32,read-only,,mandatory,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.4.1.89.57.2.8,RADLAN-MIB::rldot1dStpTrapVariable,,,,,,
.1.3.6.1.4.1.89.57.2.8.1,RADLAN-MIB::rldot1dStpTrapVrblifIndex,Integer32,read-only,,mandatory,,The ifIndex of port which STP status was changed
.1.3.6.1.4.1.89.57.2.8.2,RADLAN-MIB::rldot1dStpTrapVrblVID,INTEGER,read-only,,mandatory,,The VID of VLAN to which the port belongs which STP status was changed
.1.3.6.1.4.1.89.57.2.9,RADLAN-MIB::rldot1dStpTypeAfterReset,INTEGER,read-write,,mandatory,perDevice(1):mstp(4),New mode of spaning tree supported by the device after the next reset.
.1.3.6.1.4.1.89.57.2.10,RADLAN-MIB::rldot1dStpMonitorTime,INTEGER,read-write,,mandatory,,Factor of hello-time during which a port is monotored to determine if it is stable.
.1.3.6.1.4.1.89.57.2.11,RADLAN-MIB::rldot1dStpBpduCount,INTEGER,read-write,,mandatory,,The number of bpdu that need to received for the link to be considered stable.
.1.3.6.1.4.1.89.57.2.12,RADLAN-MIB::rldot1dStpLastChanged,TimeTicks,read-only,,mandatory,,The last time any object in this table was changed by SNMP or other local management means.
.1.3.6.1.4.1.89.57.2.13,RADLAN-MIB::rldot1dStpPortTable,,not-accessible,,mandatory,,A table that contains extended pair port specific information.
.1.3.6.1.4.1.89.57.2.13.1,RADLAN-MIB::rldot1dStpPortEntry,,not-accessible,rldot1dStpPortPort,mandatory,,A list of information maintained by every port about the Spanning Tree Protocol state for that port.
.1.3.6.1.4.1.89.57.2.13.1.1,RADLAN-MIB::rldot1dStpPortPort,INTEGER,read-only,,mandatory,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.2.13.1.2,RADLAN-MIB::rldot1dStpPortDampEnable,INTEGER,read-write,,mandatory,true(1):false(2),Specified if dampening is enabled on this port.
.1.3.6.1.4.1.89.57.2.13.1.3,RADLAN-MIB::rldot1dStpPortDampStable,INTEGER,read-only,,mandatory,true(1):false(2),Specified if the port is stable.
.1.3.6.1.4.1.89.57.2.13.1.4,RADLAN-MIB::rldot1dStpPortFilterBpdu,INTEGER,read-write,,mandatory,true(1):false(2),Specified if this port should filter bpdus when stp is disabled.
.1.3.6.1.4.1.89.57.2.13.1.5,RADLAN-MIB::rldot1dStpPortBpduSent,Counter32,read-only,,mandatory,,Specified the number of bpdu sent from this port.
.1.3.6.1.4.1.89.57.2.13.1.6,RADLAN-MIB::rldot1dStpPortBpduReceived,Counter32,read-only,,mandatory,,Specified the number of bpdu received in this port.
.1.3.6.1.4.1.89.57.2.13.1.7,RADLAN-MIB::rldot1dStpPortRole,INTEGER,read-only,,mandatory,unknown(0):disabled(1):alternate(2):backup(3):root(4):designated(5),Specified the role of this this port.
.1.3.6.1.4.1.89.57.2.13.1.8,RADLAN-MIB::rldot1dStpBpduType,INTEGER,read-only,,mandatory,stp(0):rstp(1),Specified the type of BPDU transmitted by this port.
.1.3.6.1.4.1.89.57.2.14,RADLAN-MIB::rldot1dStpPortsEnable,INTEGER,read-only,,mandatory,true(1):false(2),Enable / Disable spanning tree on ports by default .
.1.3.6.1.4.1.89.57.2.15,RADLAN-MIB::rldot1dStpTaggedFlooding,INTEGER,read-only,,mandatory,true(1):false(2),flooding can be done in tagged bpdu .
.1.3.6.1.4.1.89.57.2.16,RADLAN-MIB::rldot1dStpPortBelongToVlanDefault,INTEGER,read-only,,mandatory,true(1):false(2),The default value of rldot1dStpPortMustBelongToVlan .
.1.3.6.1.4.1.89.57.2.17,RADLAN-MIB::rldot1dStpEnableByDefault,INTEGER,read-only,,mandatory,true(1):false(2),The default value of rldot1dStpEnable .
.1.3.6.1.4.1.89.57.2.18,RADLAN-MIB::rldot1dStpPortToDefault,INTEGER,read-write,,mandatory,,To order port/s to revert to default setings .
.1.3.6.1.4.1.89.57.2.19,RADLAN-MIB::rldot1dStpSupportedType,INTEGER,read-only,,mandatory,perDevice(1):perVlan(2):mstp(3),The type of stp supported by the device.
.1.3.6.1.4.1.89.57.2.20,RADLAN-MIB::rldot1dStpEdgeportSupportInStp,INTEGER,read-only,,mandatory,true(1):false(2),If EdgePort is supported in stpCompatible mode .
.1.3.6.1.4.1.89.57.2.21,RADLAN-MIB::rldot1dStpFilterBpdu,INTEGER,read-write,,mandatory,true(1):false(2),Specified if the device should filter BPDUs when STP is disabled.
.1.3.6.1.4.1.89.57.3,RADLAN-MIB::rldot1dExtBase,,,,,,
.1.3.6.1.4.1.89.57.3.1,RADLAN-MIB::rldot1dExtBaseMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.57.3.2,RADLAN-MIB::rldot1dDeviceCapabilities,OCTET,read-only,,mandatory,,Indicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
.1.3.6.1.4.1.89.57.4,RADLAN-MIB::rldot1wRStp,,,,,,
.1.3.6.1.4.1.89.57.4.1,RADLAN-MIB::rldot1wRStpVlanEdgePortTable,,not-accessible,,mandatory,,A table that contains pair <vlan, port> specific information for the Rapid Spanning Tree Protocol.
.1.3.6.1.4.1.89.57.4.1.1,RADLAN-MIB::rldot1wRStpVlanEdgePortEntry,,not-accessible,rldot1wRStpVlanEdgePortVlan:rldot1wRStpVlanEdgePortPort,mandatory,,A list of information maintained by every pair <vlan, port> about the RAPID Spanning Tree Protocol state for that pair.
.1.3.6.1.4.1.89.57.4.1.1.1,RADLAN-MIB::rldot1wRStpVlanEdgePortVlan,INTEGER,read-only,,mandatory,,The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
.1.3.6.1.4.1.89.57.4.1.1.2,RADLAN-MIB::rldot1wRStpVlanEdgePortPort,INTEGER,read-only,,mandatory,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.4.1.1.3,RADLAN-MIB::rldot1wRStpEdgePortStatus,INTEGER,read-write,,mandatory,true(1):false(2),Specifies whether this port is an Edge Port or not
.1.3.6.1.4.1.89.57.4.2,RADLAN-MIB::rldot1wRStpForceVersionTable,,not-accessible,,mandatory,,A table that contains <vlan> specific information for the Rapid Spanning Tree Protocol.
.1.3.6.1.4.1.89.57.4.2.1,RADLAN-MIB::rldot1wRStpForceVersionEntry,,not-accessible,rldot1wRStpForceVersionVlan,mandatory,,A list of information maintained by every <vlan> about the RAPID Spanning Tree Protocol state for that pair.
.1.3.6.1.4.1.89.57.4.2.1.1,RADLAN-MIB::rldot1wRStpForceVersionVlan,INTEGER,read-only,,mandatory,,The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
.1.3.6.1.4.1.89.57.4.2.1.2,RADLAN-MIB::rldot1wRStpForceVersionState,INTEGER,read-write,,mandatory,,Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
.1.3.6.1.4.1.89.57.5,RADLAN-MIB::rldot1pPriorityMap,,,,,,
.1.3.6.1.4.1.89.57.5.1,RADLAN-MIB::rldot1pPriorityMapState,INTEGER,read-write,,mandatory,enable(1):disable(2),enable / disable
.1.3.6.1.4.1.89.57.5.2,RADLAN-MIB::rldot1pPriorityMapTable,,not-accessible,,mandatory,,This table hold information the priority maps
.1.3.6.1.4.1.89.57.5.2.1,RADLAN-MIB::rldot1pPriorityMapEntry,,not-accessible,rldot1pPriorityMapName,mandatory,,The row definition for this table.
.1.3.6.1.4.1.89.57.5.2.1.1,RADLAN-MIB::rldot1pPriorityMapName,OCTET,read-only,,mandatory,,The map name
.1.3.6.1.4.1.89.57.5.2.1.2,RADLAN-MIB::rldot1pPriorityMapPriority,OCTET,read-write,,mandatory,,The map holding the queue
.1.3.6.1.4.1.89.57.5.2.1.3,RADLAN-MIB::rldot1pPriorityMapPort,OCTET,read-write,,mandatory,,the port that the map, is applied on in config
.1.3.6.1.4.1.89.57.5.2.1.4,RADLAN-MIB::rldot1pPriorityMapPortList,OCTET,read-only,,mandatory,,the ports that the map, is applied on in actual
.1.3.6.1.4.1.89.57.5.2.1.5,RADLAN-MIB::rldot1pPriorityMapStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the table entry. It's used to delete an entry
.1.3.6.1.4.1.89.57.6,RADLAN-MIB::rldot1sMstp,,,,,,
.1.3.6.1.4.1.89.57.6.1,RADLAN-MIB::rldot1sMstpInstanceTable,,not-accessible,,mandatory,,A table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol.
.1.3.6.1.4.1.89.57.6.1.1,RADLAN-MIB::rldot1sMstpInstanceEntry,,not-accessible,rldot1sMstpInstanceId,mandatory,,A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance.
.1.3.6.1.4.1.89.57.6.1.1.1,RADLAN-MIB::rldot1sMstpInstanceId,INTEGER,read-only,,mandatory,,The Instance index.
.1.3.6.1.4.1.89.57.6.1.1.2,RADLAN-MIB::rldot1sMstpInstanceEnable,INTEGER,read-only,,mandatory,true(1):false(2),Specifies whether this Instance is STP enable or disable
.1.3.6.1.4.1.89.57.6.1.1.3,RADLAN-MIB::rldot1sMstpInstanceTimeSinceTopologyChange,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance .
.1.3.6.1.4.1.89.57.6.1.1.4,RADLAN-MIB::rldot1sMstpInstanceTopChanges,Counter32,read-only,,mandatory,,The total number of topology changes detected by this Instance since the management entity was last reset or initialized.
.1.3.6.1.4.1.89.57.6.1.1.5,RADLAN-MIB::rldot1sMstpInstanceDesignatedRoot,OCTET,read-only,,mandatory,,The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.4.1.89.57.6.1.1.6,RADLAN-MIB::rldot1sMstpInstanceRootCost,INTEGER,read-only,,mandatory,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.4.1.89.57.6.1.1.7,RADLAN-MIB::rldot1sMstpInstanceRootPort,INTEGER,read-only,,mandatory,,The port number of the port which offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.4.1.89.57.6.1.1.8,RADLAN-MIB::rldot1sMstpInstanceMaxAge,Integer32,read-only,,mandatory,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.89.57.6.1.1.9,RADLAN-MIB::rldot1sMstpInstanceHelloTime,Integer32,read-only,,mandatory,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.89.57.6.1.1.10,RADLAN-MIB::rldot1sMstpInstanceHoldTime,INTEGER,read-only,,mandatory,,This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.4.1.89.57.6.1.1.11,RADLAN-MIB::rldot1sMstpInstanceForwardDelay,Integer32,read-only,,mandatory,,This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.4.1.89.57.6.1.1.12,RADLAN-MIB::rldot1sMstpInstancePriority,INTEGER,read-write,,mandatory,,The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 4096. The next 12 bit are the msti id . The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
.1.3.6.1.4.1.89.57.6.1.1.13,RADLAN-MIB::rldot1sMstpInstanceRemainingHopes,INTEGER,read-only,,mandatory,,This count value determines the amount of hopes the information transmited by this bridge on this instance can travel.
.1.3.6.1.4.1.89.57.6.2,RADLAN-MIB::rldot1sMstpInstancePortTable,,not-accessible,,mandatory,,A table that contains pair <msti, port> specific information for the Spanning Tree Protocol.
.1.3.6.1.4.1.89.57.6.2.1,RADLAN-MIB::rldot1sMstpInstancePortEntry,,not-accessible,rldot1sMstpInstancePortMstiId:rldot1sMstpInstancePortPort,mandatory,,A list of information maintained by every pair <msti, port> about the Spanning Tree Protocol state for that pair.
.1.3.6.1.4.1.89.57.6.2.1.1,RADLAN-MIB::rldot1sMstpInstancePortMstiId,INTEGER,read-only,,mandatory,,The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.6.2.1.2,RADLAN-MIB::rldot1sMstpInstancePortPort,INTEGER,read-only,,mandatory,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.6.2.1.3,RADLAN-MIB::rldot1sMstpInstancePortPriority,INTEGER,read-write,,mandatory,,The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a product of 16. The other octet of the Port ID is given by the value of rldot1dStpVlanGroupPort.
.1.3.6.1.4.1.89.57.6.2.1.4,RADLAN-MIB::rldot1sMstpInstancePortState,INTEGER,read-only,,mandatory,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6),The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
.1.3.6.1.4.1.89.57.6.2.1.5,RADLAN-MIB::rldot1sMstpInstancePortEnable,INTEGER,read-only,,mandatory,enabled(1):disabled(2),The enabled/disabled status of the port.
.1.3.6.1.4.1.89.57.6.2.1.6,RADLAN-MIB::rldot1sMstpInstancePortPathCost,INTEGER,read-only,,mandatory,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
.1.3.6.1.4.1.89.57.6.2.1.7,RADLAN-MIB::rldot1sMstpInstancePortDesignatedRoot,OCTET,read-only,,mandatory,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.4.1.89.57.6.2.1.8,RADLAN-MIB::rldot1sMstpInstancePortDesignatedCost,INTEGER,read-only,,mandatory,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.4.1.89.57.6.2.1.9,RADLAN-MIB::rldot1sMstpInstancePortDesignatedBridge,OCTET,read-only,,mandatory,,The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.4.1.89.57.6.2.1.10,RADLAN-MIB::rldot1sMstpInstancePortDesignatedPort,OCTET,read-only,,mandatory,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.4.1.89.57.6.2.1.11,RADLAN-MIB::rldot1sMstpInstancePortForwardTransitions,Counter32,read-only,,mandatory,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.4.1.89.57.6.2.1.12,RADLAN-MIB::rldot1sMStpInstancePortAdminPathCost,INTEGER,read-write,,mandatory,,The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
.1.3.6.1.4.1.89.57.6.2.1.13,RADLAN-MIB::rldot1sMStpInstancePortRole,INTEGER,read-only,,mandatory,unknown(0):disabled(1):alternate(2):backup(3):root(4):designated(5):master(6),Specify the role of this this port.
.1.3.6.1.4.1.89.57.6.3,RADLAN-MIB::rldot1sMstpMaxHopes,INTEGER,read-write,,mandatory,,Max number of hopes that an MST BPDU will travel inside a region.
.1.3.6.1.4.1.89.57.6.4,RADLAN-MIB::rldot1sMstpConfigurationName,OCTET,read-only,,mandatory,,The active configuration name as will be caried in MST BPDU's.
.1.3.6.1.4.1.89.57.6.5,RADLAN-MIB::rldot1sMstpRevisionLevel,INTEGER,read-only,,mandatory,,The active revision level.
.1.3.6.1.4.1.89.57.6.6,RADLAN-MIB::rldot1sMstpVlanTable,,not-accessible,,mandatory,,A table that contains information about the alocation of vlans to groups.
.1.3.6.1.4.1.89.57.6.6.1,RADLAN-MIB::rldot1sMstpVlanEntry,,not-accessible,rldot1sMstpVlan,mandatory,,A list of information maintained by every vlan about the group it belongs to.
.1.3.6.1.4.1.89.57.6.6.1.1,RADLAN-MIB::rldot1sMstpVlan,INTEGER,read-only,,mandatory,,The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.6.6.1.2,RADLAN-MIB::rldot1sMstpGroup,INTEGER,read-only,,mandatory,,Specifid the active group number this vlan belonges to.
.1.3.6.1.4.1.89.57.6.6.1.3,RADLAN-MIB::rldot1sMstpPendingGroup,INTEGER,read-write,,mandatory,,Specifid the pending group number this vlan belonges to.
.1.3.6.1.4.1.89.57.6.7,RADLAN-MIB::rldot1sMstpExtPortTable,,not-accessible,,mandatory,,A table that contains MSTP information about ports of the CIST.
.1.3.6.1.4.1.89.57.6.7.1,RADLAN-MIB::rldot1sMstpExtPortEntry,,not-accessible,rldot1sMstpExtPortPort,mandatory,,A list of information maintained by every port of the CIST.
.1.3.6.1.4.1.89.57.6.7.1.1,RADLAN-MIB::rldot1sMstpExtPortPort,INTEGER,read-only,,mandatory,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.89.57.6.7.1.2,RADLAN-MIB::rldot1sMstpExtPortInternalOperPathCost,INTEGER,read-only,,mandatory,,The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
.1.3.6.1.4.1.89.57.6.7.1.3,RADLAN-MIB::rldot1sMstpExtPortDesignatedRegionalRoot,OCTET,read-only,,mandatory,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.4.1.89.57.6.7.1.4,RADLAN-MIB::rldot1sMstpExtPortDesignatedRegionalCost,INTEGER,read-only,,mandatory,,The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.4.1.89.57.6.7.1.5,RADLAN-MIB::rldot1sMstpExtPortBoundary,INTEGER,read-only,,mandatory,true(1):false(2),Indication if the port is conented to to a lan segment outside or inside the region.
.1.3.6.1.4.1.89.57.6.7.1.6,RADLAN-MIB::rldot1sMstpExtPortInternalAdminPathCost,INTEGER,read-write,,mandatory,,The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
.1.3.6.1.4.1.89.57.6.8,RADLAN-MIB::rldot1sMstpDesignatedMaxHopes,INTEGER,read-only,,mandatory,,Max number of hopes that an MST BPDU will travel inside a region.
.1.3.6.1.4.1.89.57.6.9,RADLAN-MIB::rldot1sMstpRegionalRoot,OCTET,read-only,,mandatory,,CIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root.
.1.3.6.1.4.1.89.57.6.10,RADLAN-MIB::rldot1sMstpRegionalRootCost,INTEGER,read-only,,mandatory,,The CIST path cost from the transmitting Bridge to the CIST Regional Root.
.1.3.6.1.4.1.89.57.6.11,RADLAN-MIB::rldot1sMstpPendingConfigurationName,OCTET,read-write,,mandatory,,The pending configuration name.
.1.3.6.1.4.1.89.57.6.12,RADLAN-MIB::rldot1sMstpPendingRevisionLevel,INTEGER,read-write,,mandatory,,The pending revision level.
.1.3.6.1.4.1.89.57.6.13,RADLAN-MIB::rldot1sMstpPendingAction,INTEGER,read-write,,mandatory,copyPendingActive(1):copyActivePending(2),The action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy the active mst configuration to the pending one. 
.1.3.6.1.4.1.89.57.6.14,RADLAN-MIB::rldot1sMstpRemainingHops,INTEGER,read-only,,mandatory,,This count value determines the amount of hops the information transmitted by this bridge can travel.
.1.3.6.1.4.1.89.57.7,RADLAN-MIB::rldot1dTpAgingTime,,,,,,
.1.3.6.1.4.1.89.57.7.1,RADLAN-MIB::rldot1dTpAgingTimeMin,INTEGER,read-only,,mandatory,,The min timeout period in seconds for aging out dynamically learned forwarding information.
.1.3.6.1.4.1.89.57.7.2,RADLAN-MIB::rldot1dTpAgingTimeMax,INTEGER,read-only,,mandatory,,The max timeout period in seconds for aging out dynamically learned forwarding information.
.1.3.6.1.4.1.89.58,RADLAN-MIB::rlTelnet,,,,,,
.1.3.6.1.4.1.89.58.1,RADLAN-MIB::rlTelnetMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.58.2,RADLAN-MIB::rlTelnetPassword,OCTET,read-write,,mandatory,,Telnet Password
.1.3.6.1.4.1.89.58.3,RADLAN-MIB::rlTelnetTimeout,INTEGER,read-write,,mandatory,,The number of minutes after which the TCP connection is closed if no activity is detected from the Client
.1.3.6.1.4.1.89.58.4,RADLAN-MIB::rlTelnetUsersTable,,not-accessible,,mandatory,,This table hold information about current telnet sessions
.1.3.6.1.4.1.89.58.4.1,RADLAN-MIB::rlTelnetUsersEntry,,not-accessible,rlTelnetSessionId,mandatory,,The row definition for this table.
.1.3.6.1.4.1.89.58.4.1.1,RADLAN-MIB::rlTelnetSessionId,INTEGER,read-only,,mandatory,,Telnet Session ID
.1.3.6.1.4.1.89.58.4.1.2,RADLAN-MIB::rlTelnetSessionClientAddress,IpAddress,read-only,,mandatory,,Telnet Session Client IP address
.1.3.6.1.4.1.89.58.4.1.3,RADLAN-MIB::rlTelnetSessionLoginTime,OCTET,read-only,,mandatory,,Telnet Session Login Time string
.1.3.6.1.4.1.89.58.4.1.4,RADLAN-MIB::rlTelnetSessionStatus,INTEGER,read-write,,mandatory,connected(1):disconnect(2),Telnet Session status. After status has been set to diconnect the sessions is closed and the matching entry is deleted from the table.
.1.3.6.1.4.1.89.58.5,RADLAN-MIB::rlTelnetLoginBanner,OCTET,read-write,,mandatory,,Telnet Login Banner. When telnet connection is established, the banner is the concatanation of this MIB and rlTelnetSecondLoginBanner.
.1.3.6.1.4.1.89.58.6,RADLAN-MIB::rlTelnetSecondLoginBanner,OCTET,read-write,,mandatory,,Telnet Login Banner Extension. When telnet connection is established, the banner is the concatanation of rlTelnetLoginBanner and this MIB
.1.3.6.1.4.1.89.59,RADLAN-MIB::rlPolicy,,,,,,
.1.3.6.1.4.1.89.60,RADLAN-MIB::rlArpSpoofing,,,,,,
.1.3.6.1.4.1.89.60.1,RADLAN-MIB::rlArpSpoofingMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.60.2,RADLAN-MIB::rlArpSpoofingTable,,not-accessible,,mandatory,,A list of the ifIndexes, IP addresses and corresponding MAC addresses.
.1.3.6.1.4.1.89.60.2.1,RADLAN-MIB::rlArpSpoofingEntry,,not-accessible,rlArpSpoofingIfIndex:rlArpSpoofingLocalIpAddr,mandatory,,An entry of this table specifis ifIndex,IP Address and MAC address.
.1.3.6.1.4.1.89.60.2.1.1,RADLAN-MIB::rlArpSpoofingIfIndex,Integer32,read-write,,mandatory,,The physical interface for which this entry contains information.
.1.3.6.1.4.1.89.60.2.1.2,RADLAN-MIB::rlArpSpoofingLocalIpAddr,IpAddress,read-write,,mandatory,,Ip addres for which the device will send ARP reply (ARP spoofing).
.1.3.6.1.4.1.89.60.2.1.3,RADLAN-MIB::rlArpSpoofingMacAddr,OCTET,read-write,,mandatory,,MAC addres with which the device will send ARP reply. If the field is ommited or its value 0.0.0.0 the device will send with the interface's MAC address.
.1.3.6.1.4.1.89.60.2.1.4,RADLAN-MIB::rlArpSpoofingRemoteIpAddr,IpAddress,read-write,,mandatory,,Ip addres for which the device will send periodically ARP requests if its value differs from 0.0.0.0.
.1.3.6.1.4.1.89.60.2.1.5,RADLAN-MIB::rlArpSpoofingOutPhysIfIndex,Integer32,read-write,,mandatory,,The physical interface to which the device will send periodically ARP requests if its value differs from 0. If its value is 0 then ARP requests will send to all the VLAN's ports.
.1.3.6.1.4.1.89.60.2.1.6,RADLAN-MIB::rlArpSpoofingStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to insert, update or delete an entry
.1.3.6.1.4.1.89.61,RADLAN-MIB::rlMir,,,,,,
.1.3.6.1.4.1.89.61.1,RADLAN-MIB::rlMirMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.61.2,RADLAN-MIB::rlMirMaxNumOfMRIsAfterReset,INTEGER,read-write,,mandatory,,The maximun instanses of IP Multi Instance Routers after the following reset.
.1.3.6.1.4.1.89.61.3,RADLAN-MIB::rlMirMaxNumOfMRIs,INTEGER,read-only,,mandatory,,The maximun instanses of IP Multi Instance Routers.
.1.3.6.1.4.1.89.61.4,RADLAN-MIB::rlMirCurMriNum,INTEGER,read-write,,mandatory,,The number of the MRI of which MIB variables are treated at the same time by the SNMP agent.
.1.3.6.1.4.1.89.61.5,RADLAN-MIB::rlMirInterfaceTable,,not-accessible,,mandatory,,A list of the assignment ifinterfaces to IP Router instances.
.1.3.6.1.4.1.89.61.5.1,RADLAN-MIB::rlMirInterfaceEntry,,not-accessible,rlMirInterfaceIfIndex,mandatory,,An entry of this table specifies the MRID assignement to a L2 interfrace.
.1.3.6.1.4.1.89.61.5.1.1,RADLAN-MIB::rlMirInterfaceIfIndex,Integer32,read-write,,mandatory,,The L2 interface for which this entry contains information.
.1.3.6.1.4.1.89.61.5.1.2,RADLAN-MIB::rlMirInterfaceMrid,INTEGER,read-write,,mandatory,,Multi IP Router Instance Identifier to which the interface is assgned.
.1.3.6.1.4.1.89.61.6,RADLAN-MIB::rlMirVlanBaseReservedPortsTable,,not-accessible,,mandatory,,A list VLAN based reserved physical ports.
.1.3.6.1.4.1.89.61.6.1,RADLAN-MIB::rlMirVlanBaseReservedPortsEntry,,not-accessible,rlMirVlanBaseReservedPortsIfIndex,mandatory,,A VLAN based reserved physical port.
.1.3.6.1.4.1.89.61.6.1.1,RADLAN-MIB::rlMirVlanBaseReservedPortsIfIndex,Integer32,read-write,,mandatory,,IfIndex of VLAN based reserved physical port.
.1.3.6.1.4.1.89.61.6.1.2,RADLAN-MIB::rlMirVlanBaseReservedPortsStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to delete an entry
.1.3.6.1.4.1.89.61.7,RADLAN-MIB::rlMirVlanBaseLogicalPortsTable,,not-accessible,,mandatory,,A list VLAN based logical ports.
.1.3.6.1.4.1.89.61.7.1,RADLAN-MIB::rlMirVlanBaseLogicalPortsEntry,,not-accessible,rlMirVlanBaseLogicalPortsIfIndex,mandatory,,A VLAN based logical point-to-point port.
.1.3.6.1.4.1.89.61.7.1.1,RADLAN-MIB::rlMirVlanBaseLogicalPortsIfIndex,Integer32,read-write,,mandatory,,IfIndex of VLAN based Logical point-to-point port.
.1.3.6.1.4.1.89.61.7.1.2,RADLAN-MIB::rlMirVlanBaseLogicalPortsReservedIfIndex,Integer32,read-write,,mandatory,,IfIndex of VLAN based reserved physical port on which the logical port is defined.
.1.3.6.1.4.1.89.61.7.1.3,RADLAN-MIB::rlMirVlanBaseLogicalPortsVlanTag,INTEGER,read-write,,mandatory,,VLAN tag.
.1.3.6.1.4.1.89.61.7.1.4,RADLAN-MIB::rlMirVlanBaseLogicalPortsStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to add, update and delete an entry
.1.3.6.1.4.1.89.62,RADLAN-MIB::rlIpMRouteStdMIB,,,,,,
.1.3.6.1.4.1.89.63,RADLAN-MIB::rl3sw2swTables,,,,,,
.1.3.6.1.4.1.89.63.1,RADLAN-MIB::rl3sw2swTablesPollingInterval,INTEGER,read-write,,mandatory,,The polling interval for dynamic 3SW/2SW tables in seconds.
.1.3.6.1.4.1.89.64,RADLAN-MIB::rlGvrp,,,,,,
.1.3.6.1.4.1.89.64.1,RADLAN-MIB::rlPortGvrpTimersTable,,not-accessible,,mandatory,,A table of GVRP timer values for every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.4.1.89.64.1.1,RADLAN-MIB::rlPortGvrpTimersEntry,,not-accessible,dot1dBasePort,mandatory,,GVRP timer values for a bridge port.
.1.3.6.1.4.1.89.64.1.1.1,RADLAN-MIB::rlPortGvrpJoinTime,INTEGER,read-write,,mandatory,,The GVRP Join time, in centiseconds.
.1.3.6.1.4.1.89.64.1.1.2,RADLAN-MIB::rlPortGvrpLeaveTime,INTEGER,read-write,,mandatory,,The GVRP Leave time, in centiseconds.
.1.3.6.1.4.1.89.64.1.1.3,RADLAN-MIB::rlPortGvrpLeaveAllTime,INTEGER,read-write,,mandatory,,The GVRP LeaveAll time, in centiseconds.
.1.3.6.1.4.1.89.64.1.1.4,RADLAN-MIB::rlPortGvrpOverrideGarp,INTEGER,read-write,,mandatory,enabled(1):disabled(2),If enabled{1}, GVRP timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable.
.1.3.6.1.4.1.89.64.2,RADLAN-MIB::rlGvrpSupported,INTEGER,read-only,,mandatory,true(1):false(2),Is GVRP supported in this device or not
.1.3.6.1.4.1.89.64.3,RADLAN-MIB::rlGvrpMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 3.
.1.3.6.1.4.1.89.64.4,RADLAN-MIB::rlPortGvrpStatisticsTable,,not-accessible,,mandatory,,A table of GVRP statistics values for every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.4.1.89.64.4.1,RADLAN-MIB::rlPortGvrpStatisticsEntry,,not-accessible,dot1dBasePort,mandatory,,GVRP statistics values for a bridge port.
.1.3.6.1.4.1.89.64.4.1.1,RADLAN-MIB::rlPortGvrpStatisticsRJE,Counter32,read-only,,mandatory,,The number of Join Empty Received on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.2,RADLAN-MIB::rlPortGvrpStatisticsRJIn,Counter32,read-only,,mandatory,,The number of Join In Received on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.3,RADLAN-MIB::rlPortGvrpStatisticsREmp,Counter32,read-only,,mandatory,,The number of Empty Received on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.4,RADLAN-MIB::rlPortGvrpStatisticsRLIn,Counter32,read-only,,mandatory,,The number of Leave In Received on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.5,RADLAN-MIB::rlPortGvrpStatisticsRLE,Counter32,read-only,,mandatory,,The number of Leave Empty Received on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.6,RADLAN-MIB::rlPortGvrpStatisticsRLA,Counter32,read-only,,mandatory,,The number of Leave All Received on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.7,RADLAN-MIB::rlPortGvrpStatisticsSJE,Counter32,read-only,,mandatory,,The number of Join Empty Sent on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.8,RADLAN-MIB::rlPortGvrpStatisticsSJIn,Counter32,read-only,,mandatory,,The number of Join In Sent on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.9,RADLAN-MIB::rlPortGvrpStatisticsSEmp,Counter32,read-only,,mandatory,,The number of Empty Sent on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.10,RADLAN-MIB::rlPortGvrpStatisticsSLIn,Counter32,read-only,,mandatory,,The number of Leave In Sent on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.11,RADLAN-MIB::rlPortGvrpStatisticsSLE,Counter32,read-only,,mandatory,,The number of Leave Empty Sent on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.12,RADLAN-MIB::rlPortGvrpStatisticsSLA,Counter32,read-only,,mandatory,,The number of Leave All Sent on the port, since the last clearance.
.1.3.6.1.4.1.89.64.4.1.13,RADLAN-MIB::rlPortGvrpStatisticsClear,INTEGER,read-write,,mandatory,activate(1):passive(2),activate - the signal/trigger to clear ALL the rlPortGvrpStatisticsEntry's fields. passive - specify that the rlPortGvrpStatisticsClear field is not activate, or finshed the clearnce process. the rlPortGvrpStatisticsClear return automatically to passive after it was activate.
.1.3.6.1.4.1.89.64.5,RADLAN-MIB::rlPortGvrpErrorStatisticsTable,,not-accessible,,mandatory,,A table of GVRP ErrorStatistics values for every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.4.1.89.64.5.1,RADLAN-MIB::rlPortGvrpErrorStatisticsEntry,,not-accessible,dot1dBasePort,mandatory,,GVRP ErrorStatistics values for a bridge port.
.1.3.6.1.4.1.89.64.5.1.1,RADLAN-MIB::rlPortGvrpErrorStatisticsInvProt,Counter32,read-only,,mandatory,,The number of Invalid Protocol Id encountered by the GVRP port. (since the last clearance)
.1.3.6.1.4.1.89.64.5.1.2,RADLAN-MIB::rlPortGvrpErrorStatisticsInvAtyp,Counter32,read-only,,mandatory,,The number of Invalid Attribute Type encountered by the GVRP port. (since the last clearance)
.1.3.6.1.4.1.89.64.5.1.3,RADLAN-MIB::rlPortGvrpErrorStatisticsInvAval,Counter32,read-only,,mandatory,,The number of Invalid Attribute Value encountered by the GVRP port. (since the last clearance)
.1.3.6.1.4.1.89.64.5.1.4,RADLAN-MIB::rlPortGvrpErrorStatisticsInvPlen,Counter32,read-only,,mandatory,,The number of Invalid PDU Length encountered by the GVRP port. (since the last clearance)
.1.3.6.1.4.1.89.64.5.1.5,RADLAN-MIB::rlPortGvrpErrorStatisticsInvAlen,Counter32,read-only,,mandatory,,The number of Invalid Attribute Length encountered by the GVRP port. (since the last clearance)
.1.3.6.1.4.1.89.64.5.1.6,RADLAN-MIB::rlPortGvrpErrorStatisticsInvEvent,Counter32,read-only,,mandatory,,The number of Invalid Event encountered by the GVRP port. (since the last clearance)
.1.3.6.1.4.1.89.64.5.1.7,RADLAN-MIB::rlPortGvrpErrorStatisticsClear,INTEGER,read-write,,mandatory,activate(1):passive(2),activate - the signal/trigger to clear ALL the rlPortGvrpErrorStatisticsEntry's fields. passive - specify that the rlPortGvrpErrorStatisticsClear field is not activate, or finshed the clearnce process. the rlPortGvrpErrorStatisticsClear return automatically to passive after it was activate.
.1.3.6.1.4.1.89.64.6,RADLAN-MIB::rlPortGvrpApplicantStatusTable,,not-accessible,,mandatory,,A table of GVRP Applicant Status values for every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.4.1.89.64.6.1,RADLAN-MIB::rlPortGvrpApplicantStatusEntry,,not-accessible,dot1dBasePort,mandatory,,GVRP Applicant Status value for a bridge port.
.1.3.6.1.4.1.89.64.6.1.1,RADLAN-MIB::rlPortGvrpApplicantStatusValue,INTEGER,read-write,,mandatory,participant(1):nonParticipant(2),participant - the Gvrp enabled port sending GARP PDUs. nonParticipant - preventing the Gvrp enabled port from sending GARP PDUs.
.1.3.6.1.4.1.89.64.8,RADLAN-MIB::rlPortGvrpRegistrationModeTable,,not-accessible,,mandatory,,A table of GVRP Registration Mode values for every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.4.1.89.64.8.1,RADLAN-MIB::rlPortGvrpRegistrationModeEntry,,not-accessible,dot1dBasePort,mandatory,,GVRP Registration Mode value for a bridge port.
.1.3.6.1.4.1.89.64.8.1.1,RADLAN-MIB::rlPortGvrpRegistrationModeForbidden,INTEGER,read-write,,mandatory,true(1):false(2),true - deregisters all VLANS on the specified port and prevents any VLAN creation or registration on that port. false - the registration operation on this port behaves normally.
.1.3.6.1.4.1.89.65,RADLAN-MIB::rlDot3adAgg,,,,,,
.1.3.6.1.4.1.89.65.1,RADLAN-MIB::rlDot3adAggMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.65.2,RADLAN-MIB::rlDot3adAggBalanceTable,,not-accessible,,mandatory,,An entry of this table specifies a balancing criterion used for the corresponding dot3adAggIndex.
.1.3.6.1.4.1.89.65.2.1,RADLAN-MIB::rlDot3adAggBalanceEntry,,not-accessible,dot3adAggIndex:rlDot3adAggBalanceForwardType,mandatory,,A list of information for each dot3adAggIndex.
.1.3.6.1.4.1.89.65.2.1.1,RADLAN-MIB::rlDot3adAggBalanceForwardType,INTEGER,read-only,,mandatory,bridging(1):routing(2),A Forwarding type: Bridging or Routing.
.1.3.6.1.4.1.89.65.2.1.2,RADLAN-MIB::rlDot3adAggBalanceLayer,INTEGER,read-write,,mandatory,,A Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3.
.1.3.6.1.4.1.89.65.2.1.3,RADLAN-MIB::rlDot3adAggBalanceUsedAddresses,INTEGER,read-write,,mandatory,notApplied(0):dstAddr(1):srcAddr(2):dstAndSrcAddr(3):vlanId(4):ethType(5),Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).
.1.3.6.1.4.1.89.65.2.1.4,RADLAN-MIB::rlDot3adAggBalanceBroadcastType,INTEGER,read-write,,mandatory,common(0):dedicated(1),Specifies a balancing criterion used for L2 broadcast and unknown frames: common: a link allocated for broadcast and unknown frames is used for unicast frames too dedicated: a link allocated for broadcast and unknown frames is not used for unicast frames
.1.3.6.1.4.1.89.65.3,RADLAN-MIB::rlDot3adAggNumOfTrunks,INTEGER,read-only,,mandatory,,The number of trunks supported by the device.
.1.3.6.1.4.1.89.65.4,RADLAN-MIB::rlDot3adAggMaxPortsInTrunks,INTEGER,read-only,,mandatory,,The maximun number of ports in a trunk.
.1.3.6.1.4.1.89.65.5,RADLAN-MIB::rlDot3adAggTrunkCreationSupport,INTEGER,read-write,,mandatory,notSupported(0):supportsTrunkOrLacp(1),Specifies if there is support to rldot3adAggCreationTable, and the type of the support: supportedTrunkOrLacp - ports that are members in some trunk are belongs to it by manual configuration or by lacp, but not togther. notSupported - there is not support to rldot3adAggCreationTable.
.1.3.6.1.4.1.89.65.6,RADLAN-MIB::rlDot3adAggCreationTable,,not-accessible,,mandatory,,An entry of this table is for creation of an aggregator for the corresponding dot3adAggIndex, when the value of the rlDot3adAggCreationSupport is diffrent from notSupported.
.1.3.6.1.4.1.89.65.6.1,RADLAN-MIB::rlDot3adAggCreationEntry,,not-accessible,dot3adAggIndex,mandatory,,An information for each dot3adAggIndex.
.1.3.6.1.4.1.89.65.6.1.1,RADLAN-MIB::rlDot3adAggCreationTrunk,INTEGER,read-write,,mandatory,true(1):false(2),The aggregator can aggregate ports in manual configuration.
.1.3.6.1.4.1.89.65.6.1.2,RADLAN-MIB::rlDot3adAggCreationLacp,INTEGER,read-write,,mandatory,true(1):false(2),The aggregator can aggregate ports by lacp.
.1.3.6.1.4.1.89.65.7,RADLAN-MIB::rlDot3adAggLoadBalancingPerTrunk,INTEGER,read-only,,mandatory,true(1):false(2),Specifies if load balancing is defined per trunk or per device.
.1.3.6.1.4.1.89.65.8,RADLAN-MIB::rlDot3adAggPortLacpTable,,not-accessible,,mandatory,,An entry of this table specifies lacp protocol state and statistics for the corresponding dot3adAggPortIndex.
.1.3.6.1.4.1.89.65.8.1,RADLAN-MIB::rlDot3adAggPortLacpEntry,,not-accessible,dot3adAggPortIndex,mandatory,,A list of information for each dot3adAggPortIndex.
.1.3.6.1.4.1.89.65.8.1.1,RADLAN-MIB::rlDot3adAggPortLacpPdusRx,Counter32,read-only,,mandatory,,The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.2,RADLAN-MIB::rlDot3adAggPortLacpPDUsTx,Counter32,read-only,,mandatory,,The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.3,RADLAN-MIB::rlDot3adAggPortLacpRxState,INTEGER,read-only,,mandatory,expired(2):defaulted(3):initialize(4):portDisabled(5):lacpDisabled(6),This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'portDisabled' if the Receive state machine is in the PORT_DISABLED state, or 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.4,RADLAN-MIB::rlDot3adAggPortLacpMuxState,INTEGER,read-only,,mandatory,detached(1):waiting(2):attached(3):collecting(4):distributing(5):collectingDistributing(6),This attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, 'collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, 'distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and 'collecting_ distributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.5,RADLAN-MIB::rlDot3adAggPortLacpPeriodicState,INTEGER,read-only,,mandatory,noPeriodic(1):fastPeriodic(2):slowPeriodic(3):periodicTx(4),This attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state machine for the Aggregation Port is in the SLOW_PERIODIC state, or 'periodicTx' if the Periodic state machine for the Aggregation Port is in the PERIODIC_TX state. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.6,RADLAN-MIB::rlDot3adAggPortLacpSelected,INTEGER,read-only,,mandatory,unselected(1):selected(2):waiting(3),This attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the Aggregation Port is set to SELECTED, or 'waiting' if the Selected variable for the Aggregation Port is set to WAITING. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.7,RADLAN-MIB::rlDot3adAggPortLacpReady,INTEGER,read-only,,mandatory,true(1):false(2),A read-only Boolean value indicating whether the Aggregation Port is in the WAITING state in the Mux state machine and its wait_while_timer has expired ('TRUE'). otherwise, its valus is 'FALSE'.
.1.3.6.1.4.1.89.65.8.1.8,RADLAN-MIB::rlDot3adAggPortLacpPortMoved,INTEGER,read-only,,mandatory,true(1):false(2),A read-only Boolean value indicating whether the Partner_Oper_System or Partner_Oper_Port_Number in use by the Aggregation Port has been changed in an incoming LACPDU ('TRUE'). otherwise, its valus is 'FALSE'.
.1.3.6.1.4.1.89.65.8.1.9,RADLAN-MIB::rlDot3adAggPortLacpNNT,INTEGER,read-only,,mandatory,true(1):false(2),A read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be reminded of the old information. otherwise, its valus is 'FALSE'.
.1.3.6.1.4.1.89.65.8.1.10,RADLAN-MIB::rlDot3adAggPortLacpPeriodicTxTimer,INTEGER,read-only,,mandatory,,The amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.11,RADLAN-MIB::rlDot3adAggPortLacpCurrentWhileTimer,INTEGER,read-only,,mandatory,,The amount of time in seconds remaining before the Current While timer will expire. This value is read-only.
.1.3.6.1.4.1.89.65.8.1.12,RADLAN-MIB::rlDot3adAggPortLacpWaitWhileTimer,INTEGER,read-only,,mandatory,,The amount of time in seconds remaining before the Wait While timer will expire. This value is read-only.
.1.3.6.1.4.1.89.65.9,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsSupport,INTEGER,read-write,,mandatory,true(1):false(2),Specifies if there is support to rlDot3adAggLacpMembershipRestrictionsTable.
.1.3.6.1.4.1.89.65.10,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsTable,,not-accessible,,mandatory,,An entry of this table specifies membership restrictions for ports that lacp is enbaled on them, and try to attach to the corresponding dot3adAggIndex.
.1.3.6.1.4.1.89.65.10.1,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsEntry,,not-accessible,dot3adAggIndex,mandatory,,A list of information for each dot3adAggIndex.
.1.3.6.1.4.1.89.65.10.1.1,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey,Unsigned32,read-write,,mandatory,,This variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.
.1.3.6.1.4.1.89.65.10.1.2,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode,Unsigned32,read-write,,mandatory,,This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set.
.1.3.6.1.4.1.89.65.10.1.3,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId,OCTET,read-write,,mandatory,,This variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been set.
.1.3.6.1.4.1.89.65.10.1.4,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority,Unsigned32,read-write,,mandatory,,This variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.
.1.3.6.1.4.1.89.65.10.1.5,RADLAN-MIB::rlDot3adAggLacpMembershipRestrictionsIndividualAggregator,INTEGER,read-write,,mandatory,true(1):false(2),This variable specifies if the lacp aggregator represents an Aggregate ('FALSE') or an Individual link ('TRUE').
.1.3.6.1.4.1.89.66,RADLAN-MIB::rlEmbWeb,,,,,,
.1.3.6.1.4.1.89.66.1,RADLAN-MIB::rlEmWebMibVersion,INTEGER,read-only,,mandatory,,Embedded web version, the current version is 2.
.1.3.6.1.4.1.89.66.2,RADLAN-MIB::rlEmWebWebSite,OCTET,read-write,,mandatory,,Link for the vendor web site used to retrive information.
.1.3.6.1.4.1.89.66.3,RADLAN-MIB::rlEmWebSecurityTable,,not-accessible,,mandatory,,Security Table whose entry is composed of username and Password, group and access privileges for each user. The access privileges can be one or more of none, read-files, read-write, and super.
.1.3.6.1.4.1.89.66.3.1,RADLAN-MIB::rlEmWebSecurityEntry,,not-accessible,rlEmWebSecurityUserName,mandatory,,The row definition for this table.
.1.3.6.1.4.1.89.66.3.1.1,RADLAN-MIB::rlEmWebSecurityUserName,OCTET,read-write,,mandatory,,The User name.
.1.3.6.1.4.1.89.66.3.1.2,RADLAN-MIB::rlEmWebSecurityPassword,OCTET,read-write,,mandatory,,The User password.
.1.3.6.1.4.1.89.66.3.1.3,RADLAN-MIB::rlEmWebSecurityAccess,INTEGER,read-write,,mandatory,none(1):readOnly(2):readWrite(3):super(4),Access rights for this user .
.1.3.6.1.4.1.89.66.3.1.4,RADLAN-MIB::rlEmWebSecurityIpAddr,IpAddress,read-write,,mandatory,,IP Address to send the traps to.0 means doesn't want to receive traps.
.1.3.6.1.4.1.89.66.3.1.5,RADLAN-MIB::rlEmWebSecurityPort,INTEGER,read-write,,mandatory,,Port to send the traps to.
.1.3.6.1.4.1.89.66.3.1.6,RADLAN-MIB::rlEmWebSecuritySnmpVersion,INTEGER,read-write,,mandatory,ver1(1):ver2(2):ver3(3),SNMP version supported by this user. For the agent use.
.1.3.6.1.4.1.89.66.3.1.7,RADLAN-MIB::rlEmWebSecurityStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the security table entry. It's used to delete an entry
.1.3.6.1.4.1.89.66.5,RADLAN-MIB::rlEmWebCloseTimeout,INTEGER,read-write,,mandatory,,This variable defines the maximum time period in seconds that a TCP connection can stay open without depending on the TCP timeout mechanism
.1.3.6.1.4.1.89.66.6,RADLAN-MIB::rlEmWebReceiveTimeout,INTEGER,read-write,,mandatory,,This variable defines the maximum time period in seconds that a TCP connection can wait for data which hasn't arrived 
.1.3.6.1.4.1.89.66.7,RADLAN-MIB::rlEmWebMaxIdleTimeout,INTEGER,read-write,,mandatory,,This variable defines the maximum Idle time period in seconds for a TCP connection.If another request isn't made at this period, the connection is closed 
.1.3.6.1.4.1.89.66.8,RADLAN-MIB::rlEmWebSetEWSfilesStatus,INTEGER,read-write,,mandatory,opened(1):closed(2),This variable sets the status of the embedded Web Server files to either closed or opened.
.1.3.6.1.4.1.89.66.9,RADLAN-MIB::rlEmbeddedWebApplied,INTEGER,read-only,,mandatory,true(1):false(2),Specifies if the device supports Embedded WEB: true - suppotrs false - does not support
.1.3.6.1.4.1.89.66.10,RADLAN-MIB::rlEmWebHttpPort,INTEGER,read-write,,mandatory,,Specifies the TCP port the embedded web uses for HTTP sessions.
.1.3.6.1.4.1.89.66.11,RADLAN-MIB::rlEmWebHttpEnable,INTEGER,read-write,,mandatory,true(1):false(2),Enable/Disable HTTP sessions
.1.3.6.1.4.1.89.66.12,RADLAN-MIB::rlEmWebHttpsPort,INTEGER,read-write,,mandatory,,Specifies the TCP port the embedded web uses for HTTPS sessions.
.1.3.6.1.4.1.89.66.13,RADLAN-MIB::rlEmWebHttpsEnable,INTEGER,read-write,,mandatory,true(1):false(2),Enable/Disable HTTPS sessions
.1.3.6.1.4.1.89.66.14,RADLAN-MIB::rlEmWebCertificateCountryName,OCTET,read-write,,mandatory,,Value of country name field that will appear when a new certificate is generated.
.1.3.6.1.4.1.89.66.15,RADLAN-MIB::rlEmWebCertificateStateOrProvinceName,OCTET,read-write,,mandatory,,Value of state or province name field that will appear when a new certificate is generated.
.1.3.6.1.4.1.89.66.16,RADLAN-MIB::rlEmWebCertificateLocalityName,OCTET,read-write,,mandatory,,Value of locality field that will appear when a new certificate is generated.
.1.3.6.1.4.1.89.66.17,RADLAN-MIB::rlEmWebCertificateOrganizationName,OCTET,read-write,,mandatory,,Value of organization field that will appear when a new certificate is generated.
.1.3.6.1.4.1.89.66.19,RADLAN-MIB::rlEmWebCertificateCommonName,IpAddress,read-write,,mandatory,,Value of common name field that will appear when a new certificate is generated.
.1.3.6.1.4.1.89.66.20,RADLAN-MIB::rlEmWebCertificateRegenerate,INTEGER,read-write,,mandatory,noAction(0):regenerateCertificate(1):regenerateRsaKeyAndCertificate(2),Setting to a regenerateCertificate causes a new certifiacte to be generated and to be used for all new sessions.
.1.3.6.1.4.1.89.66.21,RADLAN-MIB::rlEmWebRsaKeyLength,INTEGER,read-write,,mandatory,,Setting the RSA key size that will be created when rlEmWebRegenerateCertificateAndKey will be set to regenerateCertificateAndKey.
.1.3.6.1.4.1.89.66.22,RADLAN-MIB::rlEmWebDebug,INTEGER,read-write,,mandatory,,MIB variable for setting debug information.
.1.3.6.1.4.1.89.66.23,RADLAN-MIB::rlEmWebURL,OCTET,read-only,,mandatory,,The URL through which the EWS of this device can be accessed.
.1.3.6.1.4.1.89.66.24,RADLAN-MIB::rlEmWebDisplayNonPresentEntities,INTEGER,read-only,,mandatory,true(1):false(2),This object indicates whether the EWS is required to display non-present entities (like non-present ports, IP addresses on non-present ports etc.) on it's screens.
.1.3.6.1.4.1.89.66.25,RADLAN-MIB::rlEmWebCertificateExists,INTEGER,read-only,,mandatory,true(1):false(2),This object indicates whether a certificate has been generated.
.1.3.6.1.4.1.89.66.26,RADLAN-MIB::rlEmWebHttpsActiveCertificateId,INTEGER,read-write,,mandatory,,By setting this scalar https is notified that the certificate and key with this index should be used for new https sessions. Even if the certifcate or key doesn't exist yet the operation will succeed.
.1.3.6.1.4.1.89.67,RADLAN-MIB::rlSwPackageVersion,,,,,,
.1.3.6.1.4.1.89.67.1,RADLAN-MIB::rlSwPackageVersionTable,,not-accessible,,mandatory,,The table listing the current versions of packages that are included in the running software.
.1.3.6.1.4.1.89.67.1.1,RADLAN-MIB::rlSwPackageVersionEntry,,not-accessible,IMPLIEDrlSwPackageVersionName,mandatory,,The row definition for this table.
.1.3.6.1.4.1.89.67.1.1.1,RADLAN-MIB::rlSwPackageVersionName,OCTET,read-only,,mandatory,,The Package name.
.1.3.6.1.4.1.89.67.1.1.2,RADLAN-MIB::rlSwPackageVersionVesrion,OCTET,read-only,,mandatory,,The Package version.
.1.3.6.1.4.1.89.68,RADLAN-MIB::rlBroadcom,,,,,,
.1.3.6.1.4.1.89.69,RADLAN-MIB::rlMultiSessionTerminal,,,,,,
.1.3.6.1.4.1.89.69.1,RADLAN-MIB::rlTerminalDebugModePassword,OCTET,read-write,,mandatory,,When a user wants to change the terminal mode from debug mode to ASCII he must enter this password first
.1.3.6.1.4.1.89.70,RADLAN-MIB::rlRCli,,,,,,
.1.3.6.1.4.1.89.70.1,RADLAN-MIB::rlRCliMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.70.2,RADLAN-MIB::rlRCliUserPassword,OCTET,read-write,,mandatory,,RCLI User mode Password
.1.3.6.1.4.1.89.70.3,RADLAN-MIB::rlRCliEnablePassword,OCTET,read-write,,mandatory,,RCLI Enable mode Password
.1.3.6.1.4.1.89.70.4,RADLAN-MIB::rlRCliConfigPassword,OCTET,read-write,,mandatory,,RCLI Config mode Password
.1.3.6.1.4.1.89.70.5,RADLAN-MIB::rlRCliTimer,INTEGER,read-write,,mandatory,,RCLI Timeout
.1.3.6.1.4.1.89.70.6,RADLAN-MIB::rlRcliFileAction,INTEGER,read-write,,mandatory,notUsedAfterReset(1):usedAfterReset(2),RCLI Configuration File action determines whether The device configuration after reset will be set by the configuration file content or not.
.1.3.6.1.4.1.89.71,RADLAN-MIB::rlBgp,,,,,,
.1.3.6.1.4.1.89.72,RADLAN-MIB::rlAgentsCapabilitiesGroups,,,,,,
.1.3.6.1.4.1.89.73,RADLAN-MIB::rlAggregateVlan,,,,,,
.1.3.6.1.4.1.89.73.1,RADLAN-MIB::rlAggregateVlanMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.73.2,RADLAN-MIB::rlAggregateVlanTable,,not-accessible,,mandatory,,The table creates an aggregateVlans, the IfIndex is from 10000
.1.3.6.1.4.1.89.73.2.1,RADLAN-MIB::rlAggregateVlanEntry,,not-accessible,rlAggregateVlanIndex,mandatory,,The row definition for this table.
.1.3.6.1.4.1.89.73.2.1.1,RADLAN-MIB::rlAggregateVlanIndex,Integer32,not-accessible,,mandatory,,This index indicate the aggrigateVlan id, the aggregate vlan index is starting from 10000 
.1.3.6.1.4.1.89.73.2.1.2,RADLAN-MIB::rlAggregateVlanName,OCTET,read-write,,mandatory,,The name of the aggregateVlan 
.1.3.6.1.4.1.89.73.2.1.3,RADLAN-MIB::rlAggregateVlanPhysAddressType,INTEGER,read-write,,mandatory,default(1):reserve(2), This variable indicates whether the physical address assigned to this VLAN should be the default one or be chosen from the set of reserved physical addresses of the device.
.1.3.6.1.4.1.89.73.2.1.4,RADLAN-MIB::rlAggregateVlanStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the aggregateVlan table entry. It's used to delete an entry
.1.3.6.1.4.1.89.73.3,RADLAN-MIB::rlAggregateSubVlanTable,,not-accessible,,mandatory,,The table indicates all the allocated sub-vlans to the aggregateVlans, an entry in the rlAggregateVlanTable must be exist before allocating the subVlans
.1.3.6.1.4.1.89.73.3.1,RADLAN-MIB::rlAggregateSubVlanEntry,,not-accessible,rlAggregateVlanIndex:rlAggregateSubVlanIfIndex,mandatory,,The row definition for this table.
.1.3.6.1.4.1.89.73.3.1.1,RADLAN-MIB::rlAggregateSubVlanIfIndex,Integer32,read-only,,mandatory,,Indicate the subVlan that allocated to the aggregate vlan
.1.3.6.1.4.1.89.73.3.1.2,RADLAN-MIB::rlAggregateSubVlanStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the aggregateSubVlan table entry. It's used to delete an entry
.1.3.6.1.4.1.89.73.4,RADLAN-MIB::rlAggregateVlanArpProxy,INTEGER,read-write,,mandatory,enable(1):disable(2),When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on different sub-vlans, which belong to the same Super VLAN.The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
.1.3.6.1.4.1.89.74,RADLAN-rlLcli-MIB::rlLCli,,,,,,
.1.3.6.1.4.1.89.74.1,RADLAN-rlLcli-MIB::rlLCliMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 2.
.1.3.6.1.4.1.89.74.2,RADLAN-rlLcli-MIB::rlLCliTimeout,Unsigned32,read-write,,current,,LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected.
.1.3.6.1.4.1.89.74.3,RADLAN-rlLcli-MIB::rlLCliHistoryEnable,INTEGER,read-write,,current,true(1):false(2),Indicates if command history function is supported.
.1.3.6.1.4.1.89.74.4,RADLAN-rlLcli-MIB::rlLCliHistorySize,Unsigned32,read-write,,current,,Indicates number of commands that the system will record in its history buffer.
.1.3.6.1.4.1.89.74.5,RADLAN-rlLcli-MIB::rlLcliCommandLevelTable,,not-accessible,,current,,This Table maps a CLI command to its level. 
.1.3.6.1.4.1.89.74.5.1,RADLAN-rlLcli-MIB::rlLcliCommandLevelEntry,,not-accessible,rlLcliCommandLevelCommandName:rlLcliCommandLevelContextName,current,,The row definition for this table.
.1.3.6.1.4.1.89.74.5.1.1,RADLAN-rlLcli-MIB::rlLcliCommandLevelCommandName,OCTET,read-write,,current,, The CLI command name 
.1.3.6.1.4.1.89.74.5.1.2,RADLAN-rlLcli-MIB::rlLcliCommandLevelContextName,OCTET,read-write,,current,, The CLI context ID which the command name is associated with 
.1.3.6.1.4.1.89.74.5.1.3,RADLAN-rlLcli-MIB::rlLcliCommandLevelInsertTime,TimeTicks,read-write,,current,,The time elapsed until this entry was created.
.1.3.6.1.4.1.89.74.5.1.4,RADLAN-rlLcli-MIB::rlLcliCommandLevelCommandLevel,INTEGER,read-write,,current,, The level which is associated with the command name 
.1.3.6.1.4.1.89.74.5.1.5,RADLAN-rlLcli-MIB::rlLcliCommandLevelActionMode,INTEGER,read-write,,current,set(1):reset(2):setAll(3):resetAll(4), The level action which is associated with the command name 
.1.3.6.1.4.1.89.74.5.1.6,RADLAN-rlLcli-MIB::rlLcliCommandLevelStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of the commandLevel table entry. 
.1.3.6.1.4.1.89.74.6,RADLAN-rlLcli-MIB::rlLCliSshTimeout,Unsigned32,read-write,,current,,LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on SSH LCLI.
.1.3.6.1.4.1.89.74.7,RADLAN-rlLcli-MIB::rlLCliTelnetTimeout,Unsigned32,read-write,,current,,LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.
.1.3.6.1.4.1.89.74.8,RADLAN-rlLcli-MIB::rlLCliTelnetHistoryEnable,INTEGER,read-write,,current,true(1):false(2),Indicates if command history function is supported for Telnet.
.1.3.6.1.4.1.89.74.9,RADLAN-rlLcli-MIB::rlLCliTelnetHistorySize,Unsigned32,read-write,,current,,Indicates number of commands that the system will record in its history buffer for Telnet.
.1.3.6.1.4.1.89.74.10,RADLAN-rlLcli-MIB::rlLCliSshHistoryEnable,INTEGER,read-write,,current,true(1):false(2),Indicates if command history function is supported for Ssh.
.1.3.6.1.4.1.89.74.11,RADLAN-rlLcli-MIB::rlLCliSshHistorySize,Unsigned32,read-write,,current,,Indicates number of commands that the system will record in its history buffer for Ssh.
.1.3.6.1.4.1.89.75,RADLAN-MIB::rlGmrp,,,,,,
.1.3.6.1.4.1.89.75.1,RADLAN-MIB::rlGmrpSupported,INTEGER,read-only,,mandatory,true(1):false(2),Is Gmrp supported in the device or not.
.1.3.6.1.4.1.89.75.2,RADLAN-MIB::rlGmrpMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.75.3,RADLAN-MIB::rlPortGmrpTimersTable,,not-accessible,,mandatory,,A table of Gmrp timer values for every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.4.1.89.75.3.1,RADLAN-MIB::rlPortGmrpTimersEntry,,not-accessible,dot1dBasePort,mandatory,,Gmrp timer values for a bridge port.
.1.3.6.1.4.1.89.75.3.1.1,RADLAN-MIB::rlPortGmrpJoinTime,INTEGER,read-write,,mandatory,,The Gmrp Join time, in centiseconds.
.1.3.6.1.4.1.89.75.3.1.2,RADLAN-MIB::rlPortGmrpLeaveTime,INTEGER,read-write,,mandatory,,The Gmrp Leave time, in centiseconds.
.1.3.6.1.4.1.89.75.3.1.3,RADLAN-MIB::rlPortGmrpLeaveAllTime,INTEGER,read-write,,mandatory,,The Gmrp LeaveAll time, in centiseconds.
.1.3.6.1.4.1.89.75.3.1.4,RADLAN-MIB::rlPortGmrpOverrideGarp,INTEGER,read-write,,mandatory,enabled(1):disabled(2),If enabled{1}, Gmrp timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable.
.1.3.6.1.4.1.89.75.4,RADLAN-MIB::rlGmrpVlanTable,,not-accessible,,mandatory,,This table is to Enable/Disable Gmrp in the vlan.
.1.3.6.1.4.1.89.75.4.1,RADLAN-MIB::rlGmrpVlanEntry,,not-accessible,rlGmrpVlanTag,mandatory,,An entry in the rlGmrpVlanTable.
.1.3.6.1.4.1.89.75.4.1.1,RADLAN-MIB::rlGmrpVlanTag,INTEGER,read-only,,mandatory,,The tag of the VLAN for which this entry contains information.
.1.3.6.1.4.1.89.75.4.1.2,RADLAN-MIB::rlGmrpVlanEnable,INTEGER,read-write,,mandatory,true(1):false(2),Enable/Disable Gmrp in the vlan.
.1.3.6.1.4.1.89.76,RADLAN-MIB::rlDhcpCl,,,,,,
.1.3.6.1.4.1.89.76.3,RADLAN-MIB::rlDhcpClActionTable,,not-accessible,,mandatory,, The (conceptual) table mentione IP address which must be released/renewed on the interface.
.1.3.6.1.4.1.89.76.3.1,RADLAN-MIB::rlDhcpClActionEntry,,not-accessible,rlDhcpClActionIfIndex,mandatory,,An entry (conceptual row) in dhcpClActionTable.
.1.3.6.1.4.1.89.76.3.1.1,RADLAN-MIB::rlDhcpClActionIfIndex,Integer32,read-only,,mandatory,, The interface which the action is implemented for or NULL if it implemented for all device. 
.1.3.6.1.4.1.89.76.3.1.2,RADLAN-MIB::rlDhcpClActionStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
.1.3.6.1.4.1.89.76.3.1.3,RADLAN-MIB::rlDhcpClActionHostName,OCTET,read-write,,mandatory,, This option specifies the name of the client.
.1.3.6.1.4.1.89.77,RADLAN-MIB::rlStormCtrl,,,,,,
.1.3.6.1.4.1.89.77.1,RADLAN-MIB::rlStormCtrlSupport,INTEGER,read-only,,mandatory,true(1):false(2),Identify if the strom control protection is supported
.1.3.6.1.4.1.89.77.2,RADLAN-MIB::rlStormCtrlMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 3.
.1.3.6.1.4.1.89.77.3,RADLAN-MIB::rlStormCtrlRateUnitTypeSupport,OCTET,read-only,,mandatory,,the supported rate unit type for the storm rate control
.1.3.6.1.4.1.89.77.4,RADLAN-MIB::rlStormCtrlTypeSupport,OCTET,read-only,,mandatory,,the supported frame type for the storm control protection
.1.3.6.1.4.1.89.77.5,RADLAN-MIB::rlStormCtrlRateSupportPerType,OCTET,read-only,,mandatory,,identify if rate control is supported for each frame type
.1.3.6.1.4.1.89.77.6,RADLAN-MIB::rlStormCtrlEnbaleDependencyBetweenTypes,OCTET,read-only,,mandatory,,indicate enable limitation of dependency between frame types, such as enabling of multicast should be with the enabling of broadcast type (bcm 5632)
.1.3.6.1.4.1.89.77.7,RADLAN-MIB::rlStormCtrlRateDependencyBetweenTypes,OCTET,read-only,,mandatory,,indicate limitation of dependency between frame types for rate assignment, for example: assigning of rate limit for unicast frame must assigning the same rate for multicast and bradcast frame (bcm 5615), in case the device support enbale per each frame type but with the same rate limitation.
.1.3.6.1.4.1.89.77.8,RADLAN-MIB::rlStormCtrlTable,,not-accessible,,mandatory,,The table contains the storm control protection per port
.1.3.6.1.4.1.89.77.8.1,RADLAN-MIB::rlStormCtrlEntry,,not-accessible,dot1dBasePort,mandatory,,storm control protection, defined per port,frame type and rate
.1.3.6.1.4.1.89.77.8.1.1,RADLAN-MIB::rlStormCtrlRateType,INTEGER,read-write,,mandatory,packetsPerSecond(1):bytesPerSecond(2):framesPerBuffer(3):precentages(4):kiloBytesPerSecond(5):kiloBitsPerSecond(6),indicate the rate unit type
.1.3.6.1.4.1.89.77.8.1.2,RADLAN-MIB::rlStormCtrlUnknownUnicastEnable,INTEGER,read-write,,mandatory,true(1):false(2),enable or disable the storm control for unknown unicast frames
.1.3.6.1.4.1.89.77.8.1.3,RADLAN-MIB::rlStormCtrlUnknownUnicastRate,Unsigned32,read-write,,mandatory,,set the storm control rate limit for the unknown unicast frames, 0 indicate blocking of frames from this type.
.1.3.6.1.4.1.89.77.8.1.4,RADLAN-MIB::rlStormCtrlUnknownMulticastEnable,INTEGER,read-write,,mandatory,true(1):false(2),enable or disable the storm control for unknown multicast frames
.1.3.6.1.4.1.89.77.8.1.5,RADLAN-MIB::rlStormCtrlUnknownMulticastRate,Unsigned32,read-write,,mandatory,,set the storm control rate limit for the unknown multicast frames, 0 indicate blocking of frames from this type.
.1.3.6.1.4.1.89.77.8.1.6,RADLAN-MIB::rlStormCtrlBroadcastEnable,INTEGER,read-write,,mandatory,true(1):false(2),enable or disable the storm control for Broadcast frames
.1.3.6.1.4.1.89.77.8.1.7,RADLAN-MIB::rlStormCtrlBroadcastRate,Unsigned32,read-write,,mandatory,,set the storm control rate limit for the Broadcast frames, 0 indicate blocking of frames from this type.
.1.3.6.1.4.1.89.77.8.1.8,RADLAN-MIB::rlStormCtrlMulticastEnable,INTEGER,read-write,,mandatory,true(1):false(2),enable or disable the storm control for multicast frames
.1.3.6.1.4.1.89.77.8.1.9,RADLAN-MIB::rlStormCtrlMulticastRate,Unsigned32,read-write,,mandatory,,set the storm control rate limit for the multicast frames, 0 indicate blocking of frames from this type.
.1.3.6.1.4.1.89.77.8.1.10,RADLAN-MIB::rlStormCtrlSetDefaultRateType,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the rate unit type to its default.
.1.3.6.1.4.1.89.77.8.1.11,RADLAN-MIB::rlStormCtrlSetDefaultUnknownUnicastEnable,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control enable for unknown unicast frames to its default.
.1.3.6.1.4.1.89.77.8.1.12,RADLAN-MIB::rlStormCtrlSetDefaultUnknownUnicastRate,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control rate limit for the unknown unicast frames to its default.
.1.3.6.1.4.1.89.77.8.1.13,RADLAN-MIB::rlStormCtrlSetDefaultUnknownMulticastEnable,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control enable for unknown multicast frames to its default.
.1.3.6.1.4.1.89.77.8.1.14,RADLAN-MIB::rlStormCtrlSetDefaultUnknownMulticastRate,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control rate limit for the unknown multicast frames to its default.
.1.3.6.1.4.1.89.77.8.1.15,RADLAN-MIB::rlStormCtrlSetDefaultBroadcastEnable,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control enable for Broadcast frames to its default.
.1.3.6.1.4.1.89.77.8.1.16,RADLAN-MIB::rlStormCtrlSetDefaultBroadcastRate,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control rate limit for the Broadcast frames to its default.
.1.3.6.1.4.1.89.77.8.1.17,RADLAN-MIB::rlStormCtrlSetDefaultMulticastEnable,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control for multicast frames to its default.
.1.3.6.1.4.1.89.77.8.1.18,RADLAN-MIB::rlStormCtrlSetDefaultMulticastRate,INTEGER,read-write,,mandatory,true(1):false(2),indicate if return the storm control rate limit for the multicast frames to its default.
.1.3.6.1.4.1.89.77.9,RADLAN-MIB::rlStormCtrlGroupTable,,not-accessible,,mandatory,,The table contains per port for each supported frame type to which group it belongs.
.1.3.6.1.4.1.89.77.9.1,RADLAN-MIB::rlStormCtrlGroupEntry,,not-accessible,dot1dBasePort,mandatory,,group id for each supported frame type defined per port.
.1.3.6.1.4.1.89.77.9.1.1,RADLAN-MIB::rlStormCtrlGroupUnknownUnicastId,INTEGER,read-only,,mandatory,,Indicates the id of the group for unknown unicast frame type that the port belongs to, 0 indicates that unknown unicast frame type is not supported.
.1.3.6.1.4.1.89.77.9.1.2,RADLAN-MIB::rlStormCtrlGroupUnknownMulticastId,INTEGER,read-only,,mandatory,,Indicates the id of the group for unknown multicast frame type that the port belongs to, 0 indicates that unknown multicast frame type is not supported.
.1.3.6.1.4.1.89.77.9.1.3,RADLAN-MIB::rlStormCtrlGroupBroadcastId,INTEGER,read-only,,mandatory,,Indicates the id of the group for broadcast frame type that the port belongs to, 0 indicates that broadcast frame type is not supported.
.1.3.6.1.4.1.89.77.9.1.4,RADLAN-MIB::rlStormCtrlGroupMulticastId,INTEGER,read-only,,mandatory,,Indicates the id of the group for multicast frame type that the port belongs to, 0 indicates that multicast frame type is not supported.
.1.3.6.1.4.1.89.78,RADLAN-MIB::rlSsh,,,,,,
.1.3.6.1.4.1.89.78.1,RADLAN-SSH-MIB::rlSshMibVersion,INTEGER,read-only,,current,,The MIB version. The current version is 2
.1.3.6.1.4.1.89.78.2,RADLAN-SSH-MIB::rlSshServer,,,,,,
.1.3.6.1.4.1.89.78.2.1,RADLAN-SSH-MIB::rlSshServerHostPublicKeyTable,,not-accessible,,current,,This table contains the router's public key. Each row in this table contains a fragment of the key, in printable binhex format. There may be up to 160 characters in every fragment, and they are all combined to form one key. The key is generated by writing to rlSshServerRegenerateHostKey. To cause clients to connect to this router without printing warning messages (and also prevent active man-in-the-middle), the router's public key must printed out and inserted into the client's authorized_keys file
.1.3.6.1.4.1.89.78.2.1.1,RADLAN-SSH-MIB::rlSshServerHostPublicKeyTableEntry,,not-accessible,rlSshServerHostPublicKeyAlgorithm:rlSshServerHostPublicKeyFragmentId,current,, The row definition for this table.
.1.3.6.1.4.1.89.78.2.1.1.1,RADLAN-SSH-MIB::rlSshServerHostPublicKeyAlgorithm,INTEGER,read-only,,current,rsa1(0):rsa(1):dsa(2):none(999),Identifies the type of public key to be displayed.
.1.3.6.1.4.1.89.78.2.1.1.2,RADLAN-SSH-MIB::rlSshServerHostPublicKeyFragmentId,Unsigned32,read-only,,current,,Identifies the index of this fragment in the final key. All segments must be combined to form one big key.
.1.3.6.1.4.1.89.78.2.1.1.3,RADLAN-SSH-MIB::rlSshServerHostPublicKeyFragmentText,OCTET,read-only,,current,,A part of the readable text entry for the server's public authorzation key.
.1.3.6.1.4.1.89.78.2.2,RADLAN-SSH-MIB::rlSshServerHostPublicKeyFingerprintTable,,not-accessible,,current,,This table contains the fingerprint for the router's public key.
.1.3.6.1.4.1.89.78.2.2.1,RADLAN-SSH-MIB::rlSshServerHostPublicKeyFingerprintTableEntry,,not-accessible,rlSshServerHostPublicKeyFingerprintAlgorithm:rlSshServerHostPublicKeyFingerprintDigestFormat,current,, The row definition for this table.
.1.3.6.1.4.1.89.78.2.2.1.1,RADLAN-SSH-MIB::rlSshServerHostPublicKeyFingerprintAlgorithm,INTEGER,read-only,,current,rsa1(0):rsa(1):dsa(2):none(999),Identifies the type of public key to be displayed.
.1.3.6.1.4.1.89.78.2.2.1.2,RADLAN-SSH-MIB::rlSshServerHostPublicKeyFingerprintDigestFormat,INTEGER,read-only,,current,hex(0):bubbleBabble(1),Format of the digest to be displayed (OpenSSH or SSH.com).
.1.3.6.1.4.1.89.78.2.2.1.3,RADLAN-SSH-MIB::rlSshServerHostPublicKeyFingerprint,OCTET,read-only,,current,,SECSH format fingerprint of the server's public key. To prevent man in the middle attacks, users should make sure the ssh Server's fingerprint, as printed in the connection process, is similar to the one printed here.
.1.3.6.1.4.1.89.78.2.3,RADLAN-SSH-MIB::rlSshServerAuthorizedUsersPublicKeyTable,,not-accessible,,current,,This table contains public keys for all users who are authorized to access the router. For a user to be able to log in using SSH, the user name must appear in this table, and the user's public key must match the one found here.
.1.3.6.1.4.1.89.78.2.3.1,RADLAN-SSH-MIB::rlSshServerAuthorizedUsersPublicKeyTableEntry,,not-accessible,rlSshServerAuthorizedUserName:rlSshServerAuthorizedUserPublicKeyFragmentId,current,, The row definition for this table.
.1.3.6.1.4.1.89.78.2.3.1.1,RADLAN-SSH-MIB::rlSshServerAuthorizedUserName,OCTET,read-write,,current,,Name of the user who owns this public key. Both the user name and the key bytes must match before a user is authenticated using this key.
.1.3.6.1.4.1.89.78.2.3.1.2,RADLAN-SSH-MIB::rlSshServerAuthorizedUserPublicKeyFragmentId,Unsigned32,read-write,,current,,Identifies the index of this fragment in the final key. All segments must be combined to form one big key.
.1.3.6.1.4.1.89.78.2.3.1.3,RADLAN-SSH-MIB::rlSshServerAuthorizedUserPublicKeyFragmentText,OCTET,read-write,,current,,A part of the readable text entry for the user's public authorzation key.
.1.3.6.1.4.1.89.78.2.3.1.4,RADLAN-SSH-MIB::rlSshServerAuthorizedUserPublicKeyFragmentStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Create or delete a fragment of the user's public key. A user is deleted if it has no remaining fragments.
.1.3.6.1.4.1.89.78.2.5,RADLAN-SSH-MIB::rlSshServerAuthorizedUsersPublicKeyFingerprintTable,,not-accessible,,current,,This table contains the fingerprints of the public keys for all users who are authorized to access the router. To prevent man in the middle attacks, users should make sure the user's fingerprint, as printed in the connection process, is similar to the one printed here.
.1.3.6.1.4.1.89.78.2.5.1,RADLAN-SSH-MIB::rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry,,not-accessible,rlSshServerAuthorizedUserFingerprintName:rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat,current,, The row definition for this table.
.1.3.6.1.4.1.89.78.2.5.1.1,RADLAN-SSH-MIB::rlSshServerAuthorizedUserFingerprintName,OCTET,read-write,,current,,Name of the user who owns this public key. Both the user name and the key bytes must match before a user is authenticated using this key.
.1.3.6.1.4.1.89.78.2.5.1.2,RADLAN-SSH-MIB::rlSshServerAuthorizedUserPublicKeyFingerprintAlgorithm,INTEGER,read-only,,current,rsa1(0):rsa(1):dsa(2):none(999),Identifies the type of public key to be displayed.
.1.3.6.1.4.1.89.78.2.5.1.3,RADLAN-SSH-MIB::rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat,INTEGER,read-only,,current,hex(0):bubbleBabble(1),Format of the digest to be displayed (OpenSSH or SSH.com).
.1.3.6.1.4.1.89.78.2.5.1.4,RADLAN-SSH-MIB::rlSshServerAuthorizedUserPublicKeyFingerprint,OCTET,read-only,,current,,SECSH format fingerprint of the user's public key. To prevent man in the middle attacks, users should make sure their ssh fingerprint, as printed in the connection process, is similar to the one printed here.
.1.3.6.1.4.1.89.78.2.6,RADLAN-SSH-MIB::rlSshServerSessionTable,,not-accessible,,current,,Each row in this table corresponds to an active SSH session with the server
.1.3.6.1.4.1.89.78.2.6.1,RADLAN-SSH-MIB::rlSshServerSessionTableEntry,,not-accessible,rlSshServerSessionIdentifier,current,, The row definition for this table.
.1.3.6.1.4.1.89.78.2.6.1.1,RADLAN-SSH-MIB::rlSshServerSessionIdentifier,Unsigned32,read-only,,current,,Identifies the connection to which this row corresponds.
.1.3.6.1.4.1.89.78.2.6.1.2,RADLAN-SSH-MIB::rlSshServerSessionPeerAddress,IpAddress,read-only,,current,,The network address of the remote host connected to the server.
.1.3.6.1.4.1.89.78.2.6.1.3,RADLAN-SSH-MIB::rlSshServerSessionPeerPort,Unsigned32,read-only,,current,,The source network port of the remote host connected to the server.
.1.3.6.1.4.1.89.78.2.6.1.4,RADLAN-SSH-MIB::rlSshServerSessionPeerVersion,OCTET,read-only,,current,,The client version of the remote host connected to the server.
.1.3.6.1.4.1.89.78.2.6.1.5,RADLAN-SSH-MIB::rlSshServerSessionUsername,OCTET,read-only,,current,,SSH authenticated name of user connected to the server.
.1.3.6.1.4.1.89.78.2.6.1.6,RADLAN-SSH-MIB::rlSshServerSessionCipher,OCTET,read-only,,current,,Data encryption cipher used in this connection.
.1.3.6.1.4.1.89.78.2.6.1.7,RADLAN-SSH-MIB::rlSshServerSessionHMAC,OCTET,read-only,,current,,Message authentication code used in this connection.
.1.3.6.1.4.1.89.78.2.101,RADLAN-SSH-MIB::rlSshServerPort,Unsigned32,read-write,,current,,Specifies the TCP port used by the SSH 2 Server to listen for incoming connections.
.1.3.6.1.4.1.89.78.2.102,RADLAN-SSH-MIB::rlSshServerEnable,INTEGER,read-write,,current,enable(1):disable(2),Enables listening for incoming SSH2 connections on the port defined in rlSshServerPort.
.1.3.6.1.4.1.89.78.2.103,RADLAN-SSH-MIB::rlSshServerEnablePublicKeyAuthentication,INTEGER,read-write,,current,enable(1):disable(2),If PK authentication is enabled, incoming SSH connections are authenticated using public key authentication (using rlSshServerAuthorizedUsersPublicKeyTable), before authenticating using the router's standard AAA. If disabled, SSH connections are only authorized by the router's AAA component.
.1.3.6.1.4.1.89.78.2.104,RADLAN-SSH-MIB::rlSshServerRegenerateHostKey,INTEGER,read-write,,current,rsa1(0):rsa(1):dsa(2):none(999),Setting to a value other than none results in the Server (Host) Key being regenerated. The key size is host-specific.
.1.3.6.1.4.1.89.78.3,RADLAN-SSH-MIB::rlSshClient,,,,,,
.1.3.6.1.4.1.89.78.3.1,RADLAN-SSH-MIB::rlSshClientUserName,OCTET,read-write,,current,,Specifies the default user name the ssh client will use when authenticating to a remote server.
.1.3.6.1.4.1.89.78.3.2,RADLAN-SSH-MIB::rlSshClientRegenerateSelfKey,INTEGER,read-write,,current,rsa1(0):rsa(1):dsa(2):none(999),Setting to a value other than none results in the client self key being regenerated. The key size is host-specific.
.1.3.6.1.4.1.89.78.3.3,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyTable,,not-accessible,,current,,This table contains the router's client self public key. Each row in this table contains a fragment of the key, in printable binhex format. There may be up to 160 characters in every fragment, and they are all combined to form one key. The key is generated by writing to rlSshClientRegenerateSelfKey. To cause clients to connect to this router without printing warning messages (and also prevent active man-in-the-middle), the router's public key must printed out and inserted into the client's authorized_keys file
.1.3.6.1.4.1.89.78.3.3.1,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyTableEntry,,not-accessible,rlSshClientSelfPublicKeyAlgorithm:rlSshClientSelfPublicKeyFragmentId,current,, The row definition for this table.
.1.3.6.1.4.1.89.78.3.3.1.1,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyFragmentId,Unsigned32,read-only,,current,,Identifies the index of this fragment in the final key. All segments must be combined to form one big key.
.1.3.6.1.4.1.89.78.3.3.1.2,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyAlgorithm,INTEGER,read-only,,current,rsa1(0):rsa(1):dsa(2):none(999),Identifies the type of public key to be displayed.
.1.3.6.1.4.1.89.78.3.3.1.3,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyFragmentText,OCTET,read-write,,current,,A part of the readable text entry for the router's client public authorization key.
.1.3.6.1.4.1.89.78.3.4,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyFingerprintTable,,not-accessible,,current,,This table contains the fingerprint for the client's self key. 
.1.3.6.1.4.1.89.78.3.4.1,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyFingerprintTableEntry,,not-accessible,rlSshClientSelfPublicKeyFingerprintAlgorithm:rlSshClientSelfPublicKeyFingerprintDigestFormat,current,, The row definition for this table.
.1.3.6.1.4.1.89.78.3.4.1.1,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyFingerprintAlgorithm,INTEGER,read-only,,current,rsa1(0):rsa(1):dsa(2):none(999),Identifies the type of public key to be displayed.
.1.3.6.1.4.1.89.78.3.4.1.2,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyFingerprintDigestFormat,INTEGER,read-only,,current,hex(0):bubbleBabble(1),Format of the digest to be displayed (OpenSSH or SSH.com).
.1.3.6.1.4.1.89.78.3.4.1.3,RADLAN-SSH-MIB::rlSshClientSelfPublicKeyFingerprint,OCTET,read-only,,current,,SECSH format fingerprint of the client's self key. To prevent man in the middle attacks, users should make sure the ssh Server's fingerprint, as printed in the connection process, is similar to the one printed here.
.1.3.6.1.4.1.89.79,RADLAN-MIB::rlAAA,,,,,,
.1.3.6.1.4.1.89.79.1,RADLAN-AAA::rlAAAMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.79.2,RADLAN-AAA::rlAAARetries,INTEGER,read-write,,current,,Determines the number of retries for each method (Radius, local passwords, local users table and tacacs).
.1.3.6.1.4.1.89.79.3,RADLAN-AAA::rlAAARadiusEnabled,INTEGER,read-write,,current,true(1):false(2),Specifies whether AAA will use Radius. When to use Radius exactly depends on its position in the methods list. 
.1.3.6.1.4.1.89.79.4,RADLAN-AAA::rlAAATacacsEnabled,INTEGER,read-write,,current,true(1):false(2),Specifies whether AAA will use Tacacs. When to use Tacacs exactly depends on its position in the methods list.
.1.3.6.1.4.1.89.79.5,RADLAN-AAA::rlAAALocalUserEnabled,INTEGER,read-write,,current,true(1):false(2),Specifies whether AAA will use the local users table. When to use the table exactly depends on its position in the methods list. 
.1.3.6.1.4.1.89.79.6,RADLAN-AAA::rlAAASystemPasswordEnabled,INTEGER,read-write,,current,true(1):false(2),Specifies whether AAA will use the system password. When to use the passwords exactly depends on its position in the methods list. 
.1.3.6.1.4.1.89.79.7,RADLAN-AAA::rlAAALinePasswordEnabled,INTEGER,read-write,,current,true(1):false(2),Specifies whether AAA will use the line password. When to use the passwords exactly depends on its position in the methods list. 
.1.3.6.1.4.1.89.79.8,RADLAN-AAA::rlAAAAlwaysSuccessEnabled,INTEGER,read-write,,current,true(1):false(2),Specifies whether AAA will use the always success method. When to use that method exactly depends on its position in the methods list. 
.1.3.6.1.4.1.89.79.9,RADLAN-AAA::rlAAARadiusSupported,INTEGER,read-only,,current,true(1):false(2),This mib show whether Radius is supported in AAA. If the value is false Radius will not be used as an authentication and accounting method. If the value is true Radius will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs).
.1.3.6.1.4.1.89.79.10,RADLAN-AAA::rlAAATacacsSupported,INTEGER,read-only,,current,true(1):false(2),This mib show whether Tacacs+ is supported in AAA. If the value is false Tacacs+ will not be used as an authentication and accounting method. If the value is true Tacacs+ will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs).
.1.3.6.1.4.1.89.79.11,RADLAN-AAA::rlAAALocalUserSupported,INTEGER,read-only,,current,true(1):false(2),This mib show whether the local users db is supported in AAA.If the value is false the local users db will not be used as an authentication and accounting method. If the value is true the local users db will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
.1.3.6.1.4.1.89.79.12,RADLAN-AAA::rlAAASystemPasswordSupported,INTEGER,read-only,,current,true(1):false(2),This mib show whether system password is supported in AAA. If the value is false system password will not be used as an authentication and accounting method. If the value is true the system password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
.1.3.6.1.4.1.89.79.13,RADLAN-AAA::rlAAALinePasswordSupported,INTEGER,read-only,,current,true(1):false(2),This mib show whether line password is supported in AAA. If the value is false line password will not be used as an authentication and accounting method. If the value is true the line password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
.1.3.6.1.4.1.89.79.14,RADLAN-AAA::rlAAALineAlwaysSuccessSupported,INTEGER,read-only,,current,true(1):false(2),This mib show whether line always success method is supported in AAA.If the value is false always success method will not be used as an authentication and accounting method. If the value is true the always success method will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
.1.3.6.1.4.1.89.79.15,RADLAN-AAA::rlAAAMethodListTable,,not-accessible,,current,,The table specifies all methods list per method name.
.1.3.6.1.4.1.89.79.15.1,RADLAN-AAA::rlAAAMethodListEntry,,not-accessible,rlAAAMethodListName,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.15.1.1,RADLAN-AAA::rlAAAMethodListName,OCTET,read-write,,current,,Line Method List Name
.1.3.6.1.4.1.89.79.15.1.2,RADLAN-AAA::rlAAAMethodType1,INTEGER,read-write,,current,rlAAAMethodDeny(0):rlAAAMethodLinePassword(1):rlAAAMethodSystemPassword(2):rlAAAMethodLocalUserTable(3):rlAAAMethodRadius(4):rlAAAMethodTacacs(5):rlAAAMethodSucceed(6), first method type that will be used in the method linked list.
.1.3.6.1.4.1.89.79.15.1.3,RADLAN-AAA::rlAAAMethodType2,INTEGER,read-write,,current,rlAAAMethodDeny(0):rlAAAMethodLinePassword(1):rlAAAMethodSystemPassword(2):rlAAAMethodLocalUserTable(3):rlAAAMethodRadius(4):rlAAAMethodTacacs(5):rlAAAMethodSucceed(6), second method type that will be used in the method linked list.
.1.3.6.1.4.1.89.79.15.1.4,RADLAN-AAA::rlAAAMethodType3,INTEGER,read-write,,current,rlAAAMethodDeny(0):rlAAAMethodLinePassword(1):rlAAAMethodSystemPassword(2):rlAAAMethodLocalUserTable(3):rlAAAMethodRadius(4):rlAAAMethodTacacs(5):rlAAAMethodSucceed(6),3th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.79.15.1.5,RADLAN-AAA::rlAAAMethodType4,INTEGER,read-write,,current,rlAAAMethodDeny(0):rlAAAMethodLinePassword(1):rlAAAMethodSystemPassword(2):rlAAAMethodLocalUserTable(3):rlAAAMethodRadius(4):rlAAAMethodTacacs(5):rlAAAMethodSucceed(6), 4th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.79.15.1.6,RADLAN-AAA::rlAAAMethodType5,INTEGER,read-write,,current,rlAAAMethodDeny(0):rlAAAMethodLinePassword(1):rlAAAMethodSystemPassword(2):rlAAAMethodLocalUserTable(3):rlAAAMethodRadius(4):rlAAAMethodTacacs(5):rlAAAMethodSucceed(6),5th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.79.15.1.7,RADLAN-AAA::rlAAAMethodType6,INTEGER,read-write,,current,rlAAAMethodDeny(0):rlAAAMethodLinePassword(1):rlAAAMethodSystemPassword(2):rlAAAMethodLocalUserTable(3):rlAAAMethodRadius(4):rlAAAMethodTacacs(5):rlAAAMethodSucceed(6), 6th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.79.15.1.8,RADLAN-AAA::rlAAAMethodType7,INTEGER,read-write,,current,rlAAAMethodDeny(0):rlAAAMethodLinePassword(1):rlAAAMethodSystemPassword(2):rlAAAMethodLocalUserTable(3):rlAAAMethodRadius(4):rlAAAMethodTacacs(5):rlAAAMethodSucceed(6), 7th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.79.15.1.9,RADLAN-AAA::rlAAAMethodListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),method list status can be destroy or createAndGo
.1.3.6.1.4.1.89.79.16,RADLAN-AAA::rlAAALineTable,,not-accessible,,current,,The table specifies all lines, their passwords and their authorizations level .the table ordered lexicography by the line name. when a new line is being authenticate the search in line table is from the first entry in table till it find the first entry that fit application input line parameters .
.1.3.6.1.4.1.89.79.16.1,RADLAN-AAA::rlAAALineEntry,,not-accessible,rlAAALinePortType:rlAAAIfIndex:rlAAAServiceType,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.16.1.1,RADLAN-AAA::rlAAALinePortType,INTEGER,read-write,,current,rlAAAPortDontCare(0):rlAAAPortNetwork(1):rlAAAPortConsole(2), the physical port type .
.1.3.6.1.4.1.89.79.16.1.2,RADLAN-AAA::rlAAAIfIndex,Unsigned32,read-write,,current,,Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
.1.3.6.1.4.1.89.79.16.1.3,RADLAN-AAA::rlAAAServiceType,INTEGER,read-write,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),the service type
.1.3.6.1.4.1.89.79.16.1.4,RADLAN-AAA::rlAAALineMethodListNameLevel1,OCTET,read-write,,current,,Method list Name for level 1 .That name points to the method list table .It is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.5,RADLAN-AAA::rlAAALineMethodListNameLevel2,OCTET,read-write,,current,,Method list Name for level 2 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.6,RADLAN-AAA::rlAAALineMethodListNameLevel3,OCTET,read-write,,current,,Method list Name for level 3 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line
.1.3.6.1.4.1.89.79.16.1.7,RADLAN-AAA::rlAAALineMethodListNameLevel4,OCTET,read-write,,current,,Method list Name for level 4-that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line
.1.3.6.1.4.1.89.79.16.1.8,RADLAN-AAA::rlAAALineMethodListNameLevel5,OCTET,read-write,,current,,Method list Name for level 5 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.9,RADLAN-AAA::rlAAALineMethodListNameLevel6,OCTET,read-write,,current,,Method list Name for level 6 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.10,RADLAN-AAA::rlAAALineMethodListNameLevel7,OCTET,read-write,,current,,Method list Name for level 7 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.11,RADLAN-AAA::rlAAALineMethodListNameLevel8,OCTET,read-write,,current,,Method list Name for level 8 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.12,RADLAN-AAA::rlAAALineMethodListNameLevel9,OCTET,read-write,,current,,Method list Name for level 9 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.13,RADLAN-AAA::rlAAALineMethodListNameLevel10,OCTET,read-write,,current,,Method list Name for level 10 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.14,RADLAN-AAA::rlAAALineMethodListNameLevel11,OCTET,read-write,,current,,Method list Name for level 11 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.15,RADLAN-AAA::rlAAALineMethodListNameLevel12,OCTET,read-write,,current,,Method list Name for level 12 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.16,RADLAN-AAA::rlAAALineMethodListNameLevel13,OCTET,read-write,,current,,Method list Name for level 13 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.17,RADLAN-AAA::rlAAALineMethodListNameLevel14,OCTET,read-write,,current,,Method list Name for level 14 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.18,RADLAN-AAA::rlAAALineMethodListNameLevel15,OCTET,read-write,,current,,Method list Name for level 15 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
.1.3.6.1.4.1.89.79.16.1.19,RADLAN-AAA::rlAAALinePassword,OCTET,read-write,,current,,Line Password. Zero length password is considered as no password. Password with zero length means that in case this password is the method to be used a method fail is returned and no other method is being used.
.1.3.6.1.4.1.89.79.16.1.20,RADLAN-AAA::rlAAALineStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Line status can be destroy or createAndGo
.1.3.6.1.4.1.89.79.16.1.21,RADLAN-AAA::rlAAALineLockedState,INTEGER,read-only,,current,locked(0):usable(1),Line locked status
.1.3.6.1.4.1.89.79.16.1.22,RADLAN-AAA::rlAAALineConsFailedLogins,Counter32,read-only,,current,,Number of last consecutive failed logins
.1.3.6.1.4.1.89.79.16.1.23,RADLAN-AAA::rlAAALinePasswordValidTime,Unsigned32,read-write,,current,,The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. 
.1.3.6.1.4.1.89.79.16.1.24,RADLAN-AAA::rlAAALinePasswordExpieryDate,OCTET,read-only,,current,,If Line password aging is active, the date on which The current password will expire. Otherwise zero size string
.1.3.6.1.4.1.89.79.17,RADLAN-AAA::rlAAALocalUserTable,,not-accessible,,current,,The table specifies all usernames, their passwords and their authorizations.
.1.3.6.1.4.1.89.79.17.1,RADLAN-AAA::rlAAALocalUserEntry,,not-accessible,rlAAALocalUserName,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.17.1.1,RADLAN-AAA::rlAAALocalUserName,OCTET,read-write,,current,,Local User Name
.1.3.6.1.4.1.89.79.17.1.2,RADLAN-AAA::rlAAALocalUserPassword,OCTET,read-write,,current,,Local User Password .The password can be null
.1.3.6.1.4.1.89.79.17.1.3,RADLAN-AAA::rlAAALocalUserPrivilage,INTEGER,read-write,,current,,Local User Privilage
.1.3.6.1.4.1.89.79.17.1.4,RADLAN-AAA::rlAAALocalHostStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Local User status
.1.3.6.1.4.1.89.79.17.1.5,RADLAN-AAA::rlAAALocalLockedState,INTEGER,read-only,,current,locked(0):usable(1),Local User locked status
.1.3.6.1.4.1.89.79.17.1.6,RADLAN-AAA::rlAAALocalConsFailedLogins,Counter32,read-only,,current,,Number of last consecutive failed logins
.1.3.6.1.4.1.89.79.17.1.7,RADLAN-AAA::rlAAALocalPasswordValidTime,Unsigned32,read-write,,current,,The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. 
.1.3.6.1.4.1.89.79.17.1.8,RADLAN-AAA::rlAAALocalPasswordExpieryDate,OCTET,read-only,,current,,If User password aging is active, the date on which The current password will expire. Otherwise zero size string
.1.3.6.1.4.1.89.79.18,RADLAN-AAA::rlAAASystemPasswordlevel1,OCTET,read-write,,current,,system Password for level 1. 
.1.3.6.1.4.1.89.79.19,RADLAN-AAA::rlAAASystemPasswordlevel2,OCTET,read-write,,current,,system Password for level 2
.1.3.6.1.4.1.89.79.20,RADLAN-AAA::rlAAASystemPasswordlevel3,OCTET,read-write,,current,,system Password for level 3
.1.3.6.1.4.1.89.79.21,RADLAN-AAA::rlAAASystemPasswordlevel4,OCTET,read-write,,current,,system Password for level 4
.1.3.6.1.4.1.89.79.22,RADLAN-AAA::rlAAASystemPasswordlevel5,OCTET,read-write,,current,,system Password for level 5
.1.3.6.1.4.1.89.79.23,RADLAN-AAA::rlAAASystemPasswordlevel6,OCTET,read-write,,current,,system Password for level 6
.1.3.6.1.4.1.89.79.24,RADLAN-AAA::rlAAASystemPasswordlevel7,OCTET,read-write,,current,,system Password for level 7
.1.3.6.1.4.1.89.79.25,RADLAN-AAA::rlAAASystemPasswordlevel8,OCTET,read-write,,current,,system Password for level 8
.1.3.6.1.4.1.89.79.26,RADLAN-AAA::rlAAASystemPasswordlevel9,OCTET,read-write,,current,,system Password for level 9
.1.3.6.1.4.1.89.79.27,RADLAN-AAA::rlAAASystemPasswordlevel10,OCTET,read-write,,current,,system Password for level 10
.1.3.6.1.4.1.89.79.28,RADLAN-AAA::rlAAASystemPasswordlevel11,OCTET,read-write,,current,,system Password for level 11
.1.3.6.1.4.1.89.79.29,RADLAN-AAA::rlAAASystemPasswordlevel12,OCTET,read-write,,current,,system Password for level 12
.1.3.6.1.4.1.89.79.30,RADLAN-AAA::rlAAASystemPasswordlevel13,OCTET,read-write,,current,,system Password for level 13
.1.3.6.1.4.1.89.79.31,RADLAN-AAA::rlAAASystemPasswordlevel14,OCTET,read-write,,current,,system Password for level 14
.1.3.6.1.4.1.89.79.32,RADLAN-AAA::rlAAASystemPasswordlevel15,OCTET,read-write,,current,,system Password for level 15
.1.3.6.1.4.1.89.79.33,RADLAN-AAA::rlAAAUserTable,,not-accessible,,current,,The table holds all current users that have been authenticated.
.1.3.6.1.4.1.89.79.33.1,RADLAN-AAA::rlAAAUserEntry,,not-accessible,rlAAAUserIndex,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.33.1.1,RADLAN-AAA::rlAAAUserIndex,Unsigned32,not-accessible,,current,,User Index
.1.3.6.1.4.1.89.79.33.1.2,RADLAN-AAA::rlAAAUserServiceType,INTEGER,read-only,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),The service that the user uses. Service dont care is console terminal.
.1.3.6.1.4.1.89.79.33.1.3,RADLAN-AAA::rlAAAUserRemoteIpAddress,IpAddress,read-only,,current,,User remote IP address.
.1.3.6.1.4.1.89.79.33.1.4,RADLAN-AAA::rlAAAUserName,OCTET,read-only,,current,,User Name
.1.3.6.1.4.1.89.79.33.1.5,RADLAN-AAA::rlAAAUserLevel,Unsigned32,read-only,,current,,User level
.1.3.6.1.4.1.89.79.33.1.6,RADLAN-AAA::rlAAAUserIfIndex,Unsigned32,read-only,,current,,User if index.
.1.3.6.1.4.1.89.79.34,RADLAN-AAA::rlAAATest,,,,,,
.1.3.6.1.4.1.89.79.34.1,RADLAN-AAA::rlAAATestPassword,INTEGER,read-write,,current,,This variable enables the user supplying the correct code to use the AAA test feature.
.1.3.6.1.4.1.89.79.34.2,RADLAN-AAA::rlAAATestUserTable,,not-accessible,,current,,This table enables a user to perform a simulation of authentiction.
.1.3.6.1.4.1.89.79.34.2.1,RADLAN-AAA::rlAAATestUserEntry,,not-accessible,rlAAATestUserIndex,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.34.2.1.1,RADLAN-AAA::rlAAATestUserIndex,Unsigned32,read-write,,current,,User entry index (the number is used just to identify the user).
.1.3.6.1.4.1.89.79.34.2.1.2,RADLAN-AAA::rlAAATestPortType,INTEGER,read-write,,current,rlAAAPortDontCare(0):rlAAAPortNetwork(1):rlAAAPortConsole(2), the physical port type .
.1.3.6.1.4.1.89.79.34.2.1.3,RADLAN-AAA::rlAAATestIfIndex,INTEGER,read-write,,current,, line ifIndex can configue to be zero witch means Don't-care value
.1.3.6.1.4.1.89.79.34.2.1.4,RADLAN-AAA::rlAAATestServiceType,INTEGER,read-write,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),the service type
.1.3.6.1.4.1.89.79.34.2.1.5,RADLAN-AAA::rlAAATestUserAuthenticationStatus,INTEGER,read-only,,current,needPassword(1):needUsername(2):success(3):failure(4):aborted(5):deleted(6):waiting(7):usedNewMethod(8),Shows the ststus of the operation and what is expected from the 'user'.
.1.3.6.1.4.1.89.79.34.2.1.6,RADLAN-AAA::rlAAATestUserAuthenticationAction,INTEGER,read-write,,current,begin(1):receivePassword(2):receiveUsername(3):abort(4):delete(5):continue(6),By setting this field the process moves from one state to another. On creation the value must be begin. When the value of rlAAATestUserAuthenticationStatus is needPassword the value can be set to receivePassword or abort. When the value of rlAAATestUserAuthenticationStatus is needUsername the value can be set to receiveUsername or abort. When the value of rlAAATestUserAuthenticationStatus is success or failure the value can be set to delete or abort. When the value of rlAAATestUserAuthenticationStatus is aborted the value can be set to delete. When the value of rlAAATestUserAuthenticationStatus is deleted the value can not be set to any value. When the value of rlAAATestUserAuthenticationStatus is waiting the value can be set or abort.
.1.3.6.1.4.1.89.79.34.2.1.7,RADLAN-AAA::rlAAATestUserInput,OCTET,read-write,,current,,If the acion was set to receivePassword than this field should hold the value of the password. If the action was set to receiveUsername than this field should hold the value of the username. 
.1.3.6.1.4.1.89.79.34.2.1.8,RADLAN-AAA::rlAAATestUserStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Entry status. The entry can not be deleted. It will be deleted if unchanged more than 2 minutes.
.1.3.6.1.4.1.89.79.40,RADLAN-AAA::rlTacacs,,,,,,
.1.3.6.1.4.1.89.79.40.1,RADLAN-AAA::rlTacacsMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.79.40.2,RADLAN-AAA::rlTacacsGlobalDefaultTimeout,INTEGER,read-write,,current,,The maximum time (in seconds) to wait for TACACS+ server to reply. This MIB is used if the value of the field rlTacacsServerTimeout is 0.
.1.3.6.1.4.1.89.79.40.3,RADLAN-AAA::rlTacacsGlobalDefaultKey,OCTET,read-write,,current,,Secret key to be shared with TACACS+ server. This MIB is used if the value of the field rlTacacsServerUseGlobalDefaultKey is false.
.1.3.6.1.4.1.89.79.40.6,RADLAN-AAA::rlTacacsGlobalDefaultSourceIpInterface,IpAddress,read-write,,current,,IP address of the interface to use with TACACS+ server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerSource is 255.255.255.255.
.1.3.6.1.4.1.89.79.40.7,RADLAN-AAA::rlTacacsServerTable,,not-accessible,,current,,The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret.
.1.3.6.1.4.1.89.79.40.7.1,RADLAN-AAA::rlTacacsServerEntry,,not-accessible,rlTacacsServerAddress,current,,An entry (conceptual row) representing a TACACS+ server with which the client shares a secret.
.1.3.6.1.4.1.89.79.40.7.1.1,RADLAN-AAA::rlTacacsServerAddress,IpAddress,read-write,,current,,The IP address of the TACACS+ server referred to in this table entry.
.1.3.6.1.4.1.89.79.40.7.1.2,RADLAN-AAA::rlTacacsServerPortNumber,INTEGER,read-write,,current,,The TCP port the client establishes connections with this server.
.1.3.6.1.4.1.89.79.40.7.1.3,RADLAN-AAA::rlTacacsServerConnectionType,INTEGER,read-write,,current,rlTacacsSingleConnection(0):rlTacacsPerSessionConnection(1),Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection).
.1.3.6.1.4.1.89.79.40.7.1.4,RADLAN-AAA::rlTacacsServerConnectionStatus,INTEGER,read-only,,current,rlTacacsConnected(0):rlTacacsNotConnected(1),Specifies status TCP connection type between device and TACACS+ server.
.1.3.6.1.4.1.89.79.40.7.1.5,RADLAN-AAA::rlTacacsServerTimeout,INTEGER,read-write,,current,,The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used.
.1.3.6.1.4.1.89.79.40.7.1.6,RADLAN-AAA::rlTacacsServerUseGlobalDefaultKey,INTEGER,read-write,,current,true(1):false(2),If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used.
.1.3.6.1.4.1.89.79.40.7.1.7,RADLAN-AAA::rlTacacsServerKey,OCTET,read-write,,current,,Secret key to be shared with this TACACS+ server.
.1.3.6.1.4.1.89.79.40.7.1.8,RADLAN-AAA::rlTacacsServerSourceIpInterface,IpAddress,read-write,,current,,IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Value of 255.255.255.255 means that rlTacacsGlobalDefaultSource will be used.
.1.3.6.1.4.1.89.79.40.7.1.9,RADLAN-AAA::rlTacacsServerPriority,INTEGER,read-write,,current,,Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
.1.3.6.1.4.1.89.79.40.7.1.10,RADLAN-AAA::rlTacacsServerRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.89.79.41,RADLAN-AAA::rlAAAAuditingEnable,INTEGER,read-write,,current,true(1):false(2),Controls whether SysLog messages should be issued on login events
.1.3.6.1.4.1.89.79.42,RADLAN-AAA::rlAAAMinPasswordLength,INTEGER,read-write,,current,,The minimum length of password for local user authentication defined in field rlAAALocalUserPassword in rlAAALocalUserTable. The value applies only to new or updated user passwords. In actual implementation the range may be reduced to (0 | N-64), where N is a platform dependent (for TIC compatibility N=8) 
.1.3.6.1.4.1.89.79.43,RADLAN-AAA::rlAAAPasswordHistSize,Unsigned32,read-write,,current,,The number of most recent password, previously defined for Local User Table, Line Table, System Password Table for specific entity. This list used for password reusing prevention. Value of 0 means none. Changing the value does not cause the loss of history. History Max size is product specific.
.1.3.6.1.4.1.89.79.44,RADLAN-AAA::rlAAAPasswordHistHoldTime,Unsigned32,read-write,,current,,The time in day, which an old password may be used in password history check. loss of history.
.1.3.6.1.4.1.89.79.45,RADLAN-AAA::rlAAASuccLoginWriteToFile,INTEGER,read-write,,current,true(1):false(2),Controls whether successful logins are written to login file
.1.3.6.1.4.1.89.79.46,RADLAN-AAA::rlAAALocalLoginHistTable,,not-accessible,,current,,The table holds successful login history for all users. This table is read-only.
.1.3.6.1.4.1.89.79.46.1,RADLAN-AAA::rlAAALocalLoginHistEntry,,not-accessible,rlAAALocalLoginHistName:rlAAALocalLoginHistIndex,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.46.1.1,RADLAN-AAA::rlAAALocalLoginHistName,OCTET,read-only,,current,,User Name
.1.3.6.1.4.1.89.79.46.1.2,RADLAN-AAA::rlAAALocalLoginHistIndex,Unsigned32,not-accessible,,current,,Index in History for specific user. Lower number means more recent login.
.1.3.6.1.4.1.89.79.46.1.3,RADLAN-AAA::rlAAALocalLoginHistServiceType,INTEGER,read-only,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),The service that the user uses. Service don't care is console terminal.
.1.3.6.1.4.1.89.79.46.1.4,RADLAN-AAA::rlAAALocalLoginHistRemoteIpAddress,IpAddress,read-only,,current,,User remote IP address.
.1.3.6.1.4.1.89.79.46.1.5,RADLAN-AAA::rlAAALocalLoginHistLocalIpAddress,IpAddress,read-only,,current,,local Ip Address on login.
.1.3.6.1.4.1.89.79.46.1.6,RADLAN-AAA::rlAAALocalLoginDateTime,OCTET,read-only,,current,,Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
.1.3.6.1.4.1.89.79.47,RADLAN-AAA::rlAAALinePassLoginHistTable,,not-accessible,,current,,The table holds successful login history for Line passwords. This table is read-only.
.1.3.6.1.4.1.89.79.47.1,RADLAN-AAA::rlAAALinePassLoginHistEntry,,not-accessible,rlAAALinePassLoginHistPortType:rlAAALinePassLoginHistIfIndex:rlAAALinePassLoginHistServiceType:rlAAALinePassLoginHistIndex,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.47.1.1,RADLAN-AAA::rlAAALinePassLoginHistPortType,INTEGER,read-write,,current,rlAAAPortDontCare(0):rlAAAPortNetwork(1):rlAAAPortConsole(2), the physical port type.
.1.3.6.1.4.1.89.79.47.1.2,RADLAN-AAA::rlAAALinePassLoginHistIfIndex,Unsigned32,read-write,,current,,Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
.1.3.6.1.4.1.89.79.47.1.3,RADLAN-AAA::rlAAALinePassLoginHistServiceType,INTEGER,read-write,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),the service type
.1.3.6.1.4.1.89.79.47.1.4,RADLAN-AAA::rlAAALinePassLoginHistIndex,Unsigned32,not-accessible,,current,,Index in History for specific user. Lower number means more recent login.
.1.3.6.1.4.1.89.79.47.1.5,RADLAN-AAA::rlAAALinePassLoginHistActServiceType,INTEGER,read-only,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),The service that the user uses. Service don't care is console terminal.
.1.3.6.1.4.1.89.79.47.1.6,RADLAN-AAA::rlAAALinePassLoginHistRemoteIpAddress,IpAddress,read-only,,current,,User remote IP address.
.1.3.6.1.4.1.89.79.47.1.7,RADLAN-AAA::rlAAALinePassLoginHistLocalIpAddress,IpAddress,read-only,,current,,local Ip Address on login.
.1.3.6.1.4.1.89.79.47.1.8,RADLAN-AAA::rlAAALinePassLoginDateTime,OCTET,read-only,,current,,Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
.1.3.6.1.4.1.89.79.48,RADLAN-AAA::rlAAASystemLoginHistTable,,not-accessible,,current,,The table holds successful login history for system passwords. This table is read-only.
.1.3.6.1.4.1.89.79.48.1,RADLAN-AAA::rlAAASystemLoginHistEntry,,not-accessible,rlAAASystemLoginHistLevel:rlAAASystemLoginHistIndex,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.48.1.1,RADLAN-AAA::rlAAASystemLoginHistLevel,INTEGER,read-only,,current,,User Name
.1.3.6.1.4.1.89.79.48.1.2,RADLAN-AAA::rlAAASystemLoginHistIndex,Unsigned32,not-accessible,,current,,Index in History for specific user. Lower number means more recent login.
.1.3.6.1.4.1.89.79.48.1.3,RADLAN-AAA::rlAAASystemLoginHistServiceType,INTEGER,read-only,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),The service that the user uses. Service don't care is console terminal.
.1.3.6.1.4.1.89.79.48.1.4,RADLAN-AAA::rlAAASystemLoginHistRemoteIpAddress,IpAddress,read-only,,current,,User remote IP address.
.1.3.6.1.4.1.89.79.48.1.5,RADLAN-AAA::rlAAASystemLoginHistLocalIpAddress,IpAddress,read-only,,current,,local Ip Address on login.
.1.3.6.1.4.1.89.79.48.1.6,RADLAN-AAA::rlAAASystemLoginDateTime,OCTET,read-only,,current,,Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
.1.3.6.1.4.1.89.79.49,RADLAN-AAA::rlAAASysPassStatTable,,not-accessible,,current,,The table specifies all system password and their security properties: is password locked due to wrong password, when and how it was locked or last unsuccessful login information, expiry date of the password.
.1.3.6.1.4.1.89.79.49.1,RADLAN-AAA::rlAAASysPassStatEntry,,not-accessible,rlAAASysPassStatLevel,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.49.1.1,RADLAN-AAA::rlAAASysPassStatLevel,INTEGER,read-only,,current,,System password level
.1.3.6.1.4.1.89.79.49.1.2,RADLAN-AAA::rlAAASysPassStatLockedState,INTEGER,read-only,,current,locked(0):usable(1),System password locked status
.1.3.6.1.4.1.89.79.49.1.3,RADLAN-AAA::rlAAASysPassStatConsFailedLogins,Counter32,read-only,,current,,Number of last consecutive failed logins
.1.3.6.1.4.1.89.79.49.1.4,RADLAN-AAA::rlAAASysPassStatPasswordValidTime,Unsigned32,read-write,,current,,The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. 
.1.3.6.1.4.1.89.79.49.1.5,RADLAN-AAA::rlAAASysPassStatPasswordExpieryDate,OCTET,read-only,,current,,If System password aging is active, the date, on which the current password will expire. Otherwise zero size string
.1.3.6.1.4.1.89.79.50,RADLAN-AAA::rlAAAMaxNumLogAttmpts,INTEGER,read-write,,current,,The number of consecutive unsuccessful login attempts before user is locked. Value of 0 means no limit. The actual range is product specific. TIC requirement is 3.
.1.3.6.1.4.1.89.79.51,RADLAN-AAA::rlAAAUnlockUserName,OCTET,read-write,,current,,An action MIB variable setting with value
.1.3.6.1.4.1.89.79.52,RADLAN-AAA::rlAAAUnlockSystemPassword,INTEGER,read-write,,current,,An action MIB variable setting with value
.1.3.6.1.4.1.89.79.53,RADLAN-AAA::rlAAALockedLineTable,,not-accessible,,current,,The table specifies lines statuses. Users cannot access the product from remote based on a password of the locked line. This table enables to unlock lines.
.1.3.6.1.4.1.89.79.53.1,RADLAN-AAA::rlAAALockedLineEntry,,not-accessible,rlAAALockedLinePortType:rlAAALockedLineIfIndex:rlAAALockedLineServiceType,current,,The row definition for this table.
.1.3.6.1.4.1.89.79.53.1.1,RADLAN-AAA::rlAAALockedLinePortType,INTEGER,read-write,,current,rlAAAPortDontCare(0):rlAAAPortNetwork(1):rlAAAPortConsole(2), the physical port type .
.1.3.6.1.4.1.89.79.53.1.2,RADLAN-AAA::rlAAALockedLineIfIndex,Unsigned32,read-write,,current,,Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
.1.3.6.1.4.1.89.79.53.1.3,RADLAN-AAA::rlAAALockedLineServiceType,INTEGER,read-write,,current,rlAAAServiceTypeDontCare(0):rlAAAServiceTypeTelnet(1):rlAAAServiceTypeHttp(2):rlAAAServiceTypeSsh(3):rlAAAServiceTypeHttps(4):rlAAAServiceTypeSnmp(5),the service type
.1.3.6.1.4.1.89.79.53.1.4,RADLAN-AAA::rlAAALockedLineStatus,INTEGER,read-write,,current,locked(0):usable(1),The entry exists only if a line exist. Setting this field to value usable results in resetting the password failure counter, and unlock a locked user.
.1.3.6.1.4.1.89.80,RADLAN-MIB::rlRadius,,,,,,
.1.3.6.1.4.1.89.80.1,RADLAN-AAA::rlRadiusMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 2. 1 - original version. 2 - field rlRadiusServerUsage was added to rlRadiusServerEntry
.1.3.6.1.4.1.89.80.2,RADLAN-AAA::rlRadiusGlobalDefaultTimeout,INTEGER,read-write,,current,,The maximum time (in seconds) to wait for this RADIUS server to reply. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultTimeout is false.
.1.3.6.1.4.1.89.80.3,RADLAN-AAA::rlRadiusGlobalDefaultRetries,INTEGER,read-write,,current,,The number of times to try contacting this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultRetries is false.
.1.3.6.1.4.1.89.80.4,RADLAN-AAA::rlRadiusGlobalDefaultDeadtime,INTEGER,read-write,,current,,Number of minutes that any RADIUS server is ignored after it has failed. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultDeadtime is false.
.1.3.6.1.4.1.89.80.5,RADLAN-AAA::rlRadiusGlobalDefaultKey,OCTET,read-write,,current,,Secret key to be shared with this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultKey is false.
.1.3.6.1.4.1.89.80.6,RADLAN-AAA::rlRadiusGlobalDefaultSource,IpAddress,read-write,,current,,IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultSource is false.
.1.3.6.1.4.1.89.80.7,RADLAN-AAA::rlRadiusServerTable,,not-accessible,,current,,The (conceptual) table listing the RADIUS servers with which the cliient shares a secret.
.1.3.6.1.4.1.89.80.7.1,RADLAN-AAA::rlRadiusServerEntry,,not-accessible,rlRadiusServerAddress:rlRadiusServerAuthPortNumber:rlRadiusServerAcctPortNumber,current,,An entry (conceptual row) representing a RADIUS server with which the client shares a secret.
.1.3.6.1.4.1.89.80.7.1.1,RADLAN-AAA::rlRadiusServerAddress,IpAddress,read-write,,current,,The IP address of the RADIUS server referred to in this table entry.
.1.3.6.1.4.1.89.80.7.1.2,RADLAN-AAA::rlRadiusServerAuthPortNumber,INTEGER,read-write,,current,,The UDP port the client is using to send authentication requests to this server.
.1.3.6.1.4.1.89.80.7.1.3,RADLAN-AAA::rlRadiusServerAcctPortNumber,INTEGER,read-write,,current,,The UDP port the client is using to send accounting requests to this server.
.1.3.6.1.4.1.89.80.7.1.4,RADLAN-AAA::rlRadiusServerTimeout,INTEGER,read-write,,current,,The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout.
.1.3.6.1.4.1.89.80.7.1.5,RADLAN-AAA::rlRadiusServerRetries,INTEGER,read-write,,current,,The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries.
.1.3.6.1.4.1.89.80.7.1.6,RADLAN-AAA::rlRadiusServerDeadtime,INTEGER,read-write,,current,,Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used.
.1.3.6.1.4.1.89.80.7.1.7,RADLAN-AAA::rlRadiusServerUseGlobalDefaultKey,INTEGER,read-write,,current,true(1):false(2),If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used.
.1.3.6.1.4.1.89.80.7.1.8,RADLAN-AAA::rlRadiusServerKey,OCTET,read-write,,current,,Secret key to be shared with this RADIUS server.
.1.3.6.1.4.1.89.80.7.1.9,RADLAN-AAA::rlRadiusServerSource,IpAddress,read-write,,current,,IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used.
.1.3.6.1.4.1.89.80.7.1.10,RADLAN-AAA::rlRadiusServerPriority,INTEGER,read-write,,current,,Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
.1.3.6.1.4.1.89.80.7.1.11,RADLAN-AAA::rlRadiusServerStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.89.80.7.1.12,RADLAN-AAA::rlRadiusServerUsage,INTEGER,read-write,,current,userAuthentication(1):portAuthentication(2):all(3),Determines actions for which the radius server will be used.
.1.3.6.1.4.1.89.81,RADLAN-MIB::rlTraceRoute,,,,,,
.1.3.6.1.4.1.89.81.1,RADLAN-MIB::rlTraceRouteMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.82,RADLAN-MIB::rlSyslog,,,,,,
.1.3.6.1.4.1.89.82.2,RADLAN-SYSLOG-MIB::rlSyslogPrivate,,,,,,
.1.3.6.1.4.1.89.82.2.1,RADLAN-SYSLOG-MIB::rlSyslogGlobalEnable,INTEGER,read-write,,current,true(1):false(2),Global enable for syslog flash, syslog cache and syslog UDP. When set to false, only console logging is performed.
.1.3.6.1.4.1.89.82.2.2,RADLAN-SYSLOG-MIB::rlSyslogMinLogToConsoleSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7):notActive(8),The minimal severity to log to console. Lower severity will not be written to console. Value notActive indicate this activity is disabled.
.1.3.6.1.4.1.89.82.2.3,RADLAN-SYSLOG-MIB::rlSyslogMinLogToFileSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7):notActive(8),The minimal severity to log to LogFile. Lower severity will not be written to the LogFile. Value notActive indicates this activity is disabled.
.1.3.6.1.4.1.89.82.2.4,RADLAN-SYSLOG-MIB::rlSyslogMinLogToCacheSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7):notActive(8),The minimal severity to log to memory cache. Lower severity will not be read from cache. Value notActive indicate this activity is disabled. Note that all events are logged to cache unless its severity is notActive.
.1.3.6.1.4.1.89.82.2.5,RADLAN-SYSLOG-MIB::rlSyslogClearLogfile,Unsigned32,read-write,,current,,Setting to a value other than 0 results in deleting the log file.
.1.3.6.1.4.1.89.82.2.6,RADLAN-SYSLOG-MIB::rlSyslogClearCache,Unsigned32,read-write,,current,,Setting to a value other than 0 results in clearing the memory cache.
.1.3.6.1.4.1.89.82.2.7,RADLAN-SYSLOG-MIB::rlSyslogMibVersion,INTEGER,read-only,,current,,The Syslog MIB's version. It's 1.
.1.3.6.1.4.1.89.82.2.8,RADLAN-SYSLOG-MIB::rlSyslogLogTable,,not-accessible,,current,,A table containing events sent to the system log file.
.1.3.6.1.4.1.89.82.2.8.1,RADLAN-SYSLOG-MIB::rlSyslogLogEntry,,not-accessible,rlSyslogLogCounter,current,,A log entry 
.1.3.6.1.4.1.89.82.2.8.1.1,RADLAN-SYSLOG-MIB::rlSyslogLogCounter,Unsigned32,read-only,,current,,A counter that identifies this entry - used to differentiate logged entries. And the order given is the order of logging. A entries may not form sequence of this value. (Time is not a differentiating element as logged entries may come in a sequence.
.1.3.6.1.4.1.89.82.2.8.1.2,RADLAN-SYSLOG-MIB::rlSyslogLogDateTime,OCTET,read-only,,current,,The time in string (formated DD-MMM-YYYY HH:MM:SS e.g 14-Apr-2002 10:33:31), when the error was logged..
.1.3.6.1.4.1.89.82.2.8.1.3,RADLAN-SYSLOG-MIB::rlSyslogLogAppMnemonic,OCTET,read-only,,current,,Application that created this error.
.1.3.6.1.4.1.89.82.2.8.1.4,RADLAN-SYSLOG-MIB::rlSyslogLogSeverity,INTEGER,read-only,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7):notActive(8),Severity of the reported error.
.1.3.6.1.4.1.89.82.2.8.1.5,RADLAN-SYSLOG-MIB::rlSyslogLogMessageMnemonic,OCTET,read-only,,current,,Short identifier of this message that created this error.
.1.3.6.1.4.1.89.82.2.8.1.6,RADLAN-SYSLOG-MIB::rlSyslogLogText1,OCTET,read-only,,current,,The text of the logged message without time and date - part 1.
.1.3.6.1.4.1.89.82.2.8.1.7,RADLAN-SYSLOG-MIB::rlSyslogLogText2,OCTET,read-only,,current,,The text of the logged message without time and date - part 2.
.1.3.6.1.4.1.89.82.2.8.1.8,RADLAN-SYSLOG-MIB::rlSyslogLogText3,OCTET,read-only,,current,,The text of the logged message without time and date - part 3.
.1.3.6.1.4.1.89.82.2.8.1.9,RADLAN-SYSLOG-MIB::rlSyslogLogText4,OCTET,read-only,,current,,The text of the logged message without time and date - part 4.
.1.3.6.1.4.1.89.82.2.9,RADLAN-SYSLOG-MIB::rlSyslogLogCacheTable,,not-accessible,,current,,A table containing errors registered to system cache.
.1.3.6.1.4.1.89.82.2.9.1,RADLAN-SYSLOG-MIB::rlSyslogLogCacheEntry,,not-accessible,rlSyslogLogCacheCounter,current,,A log history entry
.1.3.6.1.4.1.89.82.2.9.1.1,RADLAN-SYSLOG-MIB::rlSyslogLogCacheCounter,Unsigned32,read-only,,current,,A counter that identifies this entry - used to differentiate logged entries. And the order given is the order of logging. A entries may not form sequence of this value. (Time is not a differentiating element as logged entries may come in a sequence.
.1.3.6.1.4.1.89.82.2.9.1.2,RADLAN-SYSLOG-MIB::rlSyslogLogCacheDateTime,OCTET,read-only,,current,,The time in string (formated DD-MMM-YYYY HH:MM:SS e.g 14-Apr-2002 10:33:31), when the eroor was logged..
.1.3.6.1.4.1.89.82.2.9.1.3,RADLAN-SYSLOG-MIB::rlSyslogLogCacheAppMnemonic,OCTET,read-only,,current,,Application that created this error.
.1.3.6.1.4.1.89.82.2.9.1.4,RADLAN-SYSLOG-MIB::rlSyslogLogCacheSeverity,INTEGER,read-only,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7):notActive(8),Severity of the reported error.
.1.3.6.1.4.1.89.82.2.9.1.5,RADLAN-SYSLOG-MIB::rlSyslogLogCacheMessageMnemonic,OCTET,read-only,,current,,Short identifier of this message that created this error.
.1.3.6.1.4.1.89.82.2.9.1.6,RADLAN-SYSLOG-MIB::rlSyslogLogCacheText1,OCTET,read-only,,current,,The text of the logged message without time and date - part 1.
.1.3.6.1.4.1.89.82.2.9.1.7,RADLAN-SYSLOG-MIB::rlSyslogLogCacheText2,OCTET,read-only,,current,,The text of the logged message without time and date - part 2.
.1.3.6.1.4.1.89.82.2.9.1.8,RADLAN-SYSLOG-MIB::rlSyslogLogCacheText3,OCTET,read-only,,current,,The text of the logged message without time and date - part 3.
.1.3.6.1.4.1.89.82.2.9.1.9,RADLAN-SYSLOG-MIB::rlSyslogLogCacheText4,OCTET,read-only,,current,,The text of the logged message without time and date - part 4.
.1.3.6.1.4.1.89.82.2.10,RADLAN-SYSLOG-MIB::rlSyslogConsoleMessagesIgnored,Counter32,read-only,,current,,This is a count of messages not sent to the console because the severity level of the message was above rlSyslogMinLogToConsoleSeverity, the higher the level, the lower the severity.
.1.3.6.1.4.1.89.82.2.11,RADLAN-SYSLOG-MIB::rlSyslogFileMessagesIgnored,Counter32,read-only,,current,,This is a count of messages not sent to the file because the severity level of the message was above rlSyslogMinLogToFileSeverity, the higher the level, the lower the severity.
.1.3.6.1.4.1.89.82.2.12,RADLAN-SYSLOG-MIB::rlSyslogFileMessagesLogged,Counter32,read-only,,current,,This is a count of all the messages currently held in the Log file.
.1.3.6.1.4.1.89.82.2.13,RADLAN-SYSLOG-MIB::rlSyslogCacheTotalMessages,Counter32,read-only,,current,,This is a count of all the messages currently held in the cache.
.1.3.6.1.4.1.89.82.3,RADLAN-SYSLOG-MIB::rlSyslogPhaseOneTests,,,,,,
.1.3.6.1.4.1.89.82.3.1,RADLAN-SYSLOG-MIB::rlSyslogPhaseOneTestGenerator,INTEGER,read-write,,current,successfulRegistration(11):regTheSameComponentTwice(12):regWithInvalidComponentID(13):regWithInvalidApplicationID(14):regWithInvalidMessageString(15):regWithInvalidMessageList(16):regWithInvalidApplicationList(17):successfulLoggingWithNoParams(21):logWithUnregisteredComponentID(22):logWithInvalidComponentID(23):logWithBadApplicationID(24):logWithBadMessageID(25):paramFormatting(31):insufficientParams(32):incorrectParams(33):tooManyParams(34):oversizedParams(35):trapParams(36):successfulFatalError(41):fatalErrorThroughNonFatalInterface(42):nonFatalErrorThroughFatalInterface(43):nestedFatalErrors(47):snmpAccessToLongMessage(62),Writing a value to this leaf results in a test being run on the host.
.1.3.6.1.4.1.89.83,RADLAN-MIB::rlEnv,,,,,,
.1.3.6.1.4.1.89.83.1,RADLAN-HWENVIROMENT::rlEnvPhysicalDescription,,,,,,
.1.3.6.1.4.1.89.83.1.1,RADLAN-HWENVIROMENT::rlEnvMonFanStatusTable,,not-accessible,,current,,The table of fan status maintained by the environmental monitor.
.1.3.6.1.4.1.89.83.1.1.1,RADLAN-HWENVIROMENT::rlEnvMonFanStatusEntry,,not-accessible,rlEnvMonFanStatusIndex,current,,An entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor.
.1.3.6.1.4.1.89.83.1.1.1.1,RADLAN-HWENVIROMENT::rlEnvMonFanStatusIndex,INTEGER,not-accessible,,current,,Unique index for the fan being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
.1.3.6.1.4.1.89.83.1.1.1.2,RADLAN-HWENVIROMENT::rlEnvMonFanStatusDescr,OCTET,read-only,,current,,Textual description of the fan being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.
.1.3.6.1.4.1.89.83.1.1.1.3,RADLAN-HWENVIROMENT::rlEnvMonFanState,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the fan being instrumented.
.1.3.6.1.4.1.89.83.1.2,RADLAN-HWENVIROMENT::rlEnvMonSupplyStatusTable,,not-accessible,,current,,The table of power supply status maintained by the environmental monitor card.
.1.3.6.1.4.1.89.83.1.2.1,RADLAN-HWENVIROMENT::rlEnvMonSupplyStatusEntry,,not-accessible,rlEnvMonSupplyStatusIndex,current,,An entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card.
.1.3.6.1.4.1.89.83.1.2.1.1,RADLAN-HWENVIROMENT::rlEnvMonSupplyStatusIndex,INTEGER,not-accessible,,current,,Unique index for the power supply being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
.1.3.6.1.4.1.89.83.1.2.1.2,RADLAN-HWENVIROMENT::rlEnvMonSupplyStatusDescr,OCTET,read-only,,current,,Textual description of the power supply being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.
.1.3.6.1.4.1.89.83.1.2.1.3,RADLAN-HWENVIROMENT::rlEnvMonSupplyState,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the power supply being instrumented.
.1.3.6.1.4.1.89.83.1.2.1.4,RADLAN-HWENVIROMENT::rlEnvMonSupplySource,INTEGER,read-only,,current,unknown(1):ac(2):dc(3):externalPowerSupply(4):internalRedundant(5),The power supply source. unknown - Power supply source unknown ac - AC power supply dc - DC power supply externalPowerSupply - External power supply internalRedundant - Internal redundant power supply 
.1.3.6.1.4.1.89.83.3,RADLAN-SENSORENTMIB::rlEntPhySensorTable,,not-accessible,,current,,The addition to the table of sensors maintained by the environmental monitor.
.1.3.6.1.4.1.89.83.3.1,RADLAN-SENSORENTMIB::rlEntPhySensorEntry,,not-accessible,,current,,An additon to the entry in the sensor table, representing the maximum/minimum values for the sensor associated.
.1.3.6.1.4.1.89.83.3.1.1,RADLAN-SENSORENTMIB::rlEnvPhySensorMinValue,Integer32,read-only,,current,,Minimum value for the Sensor being instrumented.
.1.3.6.1.4.1.89.83.3.1.2,RADLAN-SENSORENTMIB::rlEnvPhySensorMaxValue,Integer32,read-only,,current,,Maximum value for the Sensor being instrumented.
.1.3.6.1.4.1.89.83.3.1.3,RADLAN-SENSORENTMIB::rlEnvPhySensorTestValue,Integer32,read-write,,current,,Test/reference value for the Sensor being instrumented.
.1.3.6.1.4.1.89.83.4,RADLAN-SENSORENTMIB::rlSensor,,,,,,The private MIB module definition for sensors
.1.3.6.1.4.1.89.84,RADLAN-MIB::rlSmon,,,,,,
.1.3.6.1.4.1.89.84.1,RADLAN-MIB::rlPortCopyMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.84.2,RADLAN-MIB::rlPortCopySupport,INTEGER,read-only,,mandatory,supported(1):notSupported(2),supported - The standard portCopy is supported. notSupported - the standard portCopy is not supported. only basic portCopy operation is supported. 
.1.3.6.1.4.1.89.84.3,RADLAN-MIB::rlPortCopyVlanTaggingTable,,not-accessible,,mandatory,,A supplementing table for portCopyTable. For every portCopyDest a vlan-tagging option is available.
.1.3.6.1.4.1.89.84.3.1,RADLAN-MIB::rlPortCopyVlanTaggingEntry,,not-accessible,dot1dBasePort,mandatory,,Each entry specify how mirrored packets will transmit from the portCopyDest: Tagged or unTagged. The values in this entry will be valid only when the dot1dBasePort will be configured as a portCopyDest in the portCopyTable.
.1.3.6.1.4.1.89.84.3.1.1,RADLAN-MIB::rlPortCopyVlanTagging,INTEGER,read-write,,mandatory,true(1):false(2),TRUE - Mirrored packets will transmit from portCopyDest - Tagged FALSE - Mirrored packets will transmit from portCopyDest - unTagged
.1.3.6.1.4.1.89.85,RADLAN-MIB::rlSocket,,,,,,
.1.3.6.1.4.1.89.85.1,RADLAN-MIB::rlSocketMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.85.2,RADLAN-MIB::rlSocketTable,,not-accessible,,mandatory,,The (conceptual) table listing the sockets which are currently open in the system.
.1.3.6.1.4.1.89.85.2.1,RADLAN-MIB::rlSocketEntry,,not-accessible,rlSocketId,mandatory,,An entry (conceptual row) in the SocketTable.
.1.3.6.1.4.1.89.85.2.1.1,RADLAN-MIB::rlSocketId,INTEGER,read-only,,mandatory,,The value of the id of the socket. 
.1.3.6.1.4.1.89.85.2.1.2,RADLAN-MIB::rlSocketType,INTEGER,read-only,,mandatory,stream(1):dgram(2):raw(3),Specifies the type of the socket. 
.1.3.6.1.4.1.89.85.2.1.3,RADLAN-MIB::rlSocketState,INTEGER,read-only,,mandatory,connected(1):notConnected(2):recvClosed(3):sendClosed(4):closed(5),Specifies the state in which the socket is in. 
.1.3.6.1.4.1.89.85.2.1.4,RADLAN-MIB::rlSocketBlockMode,INTEGER,read-only,,mandatory,blocking(1):nonBlocking(2),Specifies the blocking mode of the socket. 
.1.3.6.1.4.1.89.85.2.1.5,RADLAN-MIB::rlSocketUpTime,TimeTicks,read-only,,mandatory,,The time elapsed since this socket was created.
.1.3.6.1.4.1.89.86,RADLAN-MIB::rlDigitalKeyManage,,,,,,
.1.3.6.1.4.1.89.86.1,RADLAN-MIB::rlMD5KeyChainTable,,not-accessible,,mandatory,,Key-chains and key ID's
.1.3.6.1.4.1.89.86.1.1,RADLAN-MIB::rlMD5KeyChainEntry,,not-accessible,rlMD5KeyChainName:rlMD5KeyChainKeyId,mandatory,,Key-chain with key ID that belongs to this chain
.1.3.6.1.4.1.89.86.1.1.1,RADLAN-MIB::rlMD5KeyChainName,OCTET,read-only,,mandatory,,Name of the key-chain to which belongs the secret authentication key
.1.3.6.1.4.1.89.86.1.1.2,RADLAN-MIB::rlMD5KeyChainKeyId,INTEGER,read-only,,mandatory,,A 8-bit identifier for the secret authentication key. This identifier is the same as key ID used in rlMD5KeyTable.
.1.3.6.1.4.1.89.86.1.1.3,RADLAN-MIB::rlMD5KeyChainKeyRowStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to insert, update or delete an entry
.1.3.6.1.4.1.89.86.2,RADLAN-MIB::rlMD5KeyTable,,not-accessible,,mandatory,,Secret authentication keys used by MD5 Authentication Algorithm
.1.3.6.1.4.1.89.86.2.1,RADLAN-MIB::rlMD5KeyEntry,,not-accessible,rlMD5KeyId,mandatory,,Secret authentication key with all related parameters
.1.3.6.1.4.1.89.86.2.1.1,RADLAN-MIB::rlMD5KeyId,INTEGER,read-only,,mandatory,,A 8-bit identifier for the secret authentication key
.1.3.6.1.4.1.89.86.2.1.2,RADLAN-MIB::rlMD5Key,OCTET,read-write,,mandatory,,The 128-bit secret authentication key. The key can get value only once and cannot be modified. When read, rlMD5KeyChainKey always returns an Octet String of length zero.
.1.3.6.1.4.1.89.86.2.1.3,RADLAN-MIB::rlMD5KeyStartAccept,OCTET,read-write,,mandatory,,The time that the router will start accepting packets that have been created with the given key
.1.3.6.1.4.1.89.86.2.1.4,RADLAN-MIB::rlMD5KeyStartGenerate,OCTET,read-write,,mandatory,,The time that the router will start using the key for packet generation
.1.3.6.1.4.1.89.86.2.1.5,RADLAN-MIB::rlMD5KeyStopGenerate,OCTET,read-write,,mandatory,,The time that the router will stop using the key for packet generation
.1.3.6.1.4.1.89.86.2.1.6,RADLAN-MIB::rlMD5KeyStopAccept,OCTET,read-write,,mandatory,,The time that the router will stop accepting packets that have been created with the given key
.1.3.6.1.4.1.89.86.2.1.7,RADLAN-MIB::rlMD5KeyRowStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to insert, update or delete an entry
.1.3.6.1.4.1.89.87,RADLAN-MIB::rlCopy,,,,,,
.1.3.6.1.4.1.89.87.1,RADLAN-COPY-MIB::rlCopyMibVersion,INTEGER,read-only,,current,,Indicates the Copy support version. The current version is 1.
.1.3.6.1.4.1.89.87.2,RADLAN-COPY-MIB::rlCopyTable,,not-accessible,,current,, The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
.1.3.6.1.4.1.89.87.2.1,RADLAN-COPY-MIB::rlCopyEntry,,not-accessible,rlCopyIndex,current,, An entry (conceptual row) in the CopyTable.
.1.3.6.1.4.1.89.87.2.1.1,RADLAN-COPY-MIB::rlCopyIndex,INTEGER,read-only,,current,,The row index in the table.
.1.3.6.1.4.1.89.87.2.1.2,RADLAN-COPY-MIB::rlCopyApplicationId,INTEGER,read-only,,current,mcli(1):cli(2):ewb(3):nms(4):initerm(5):serial(6),The applicatione activated this comand
.1.3.6.1.4.1.89.87.2.1.3,RADLAN-COPY-MIB::rlCopySourceLocation,INTEGER,read-write,,current,local(1):anotherUnit(2):tftp(3):xmodem(4):scp(5):serial(6),Source File Location
.1.3.6.1.4.1.89.87.2.1.4,RADLAN-COPY-MIB::rlCopySourceIpAddress,IpAddress,read-write,,current,,The Ip address of the source remote host
.1.3.6.1.4.1.89.87.2.1.5,RADLAN-COPY-MIB::rlCopySourceUnitNumber,INTEGER,read-write,,current,,The unit number of the source unit
.1.3.6.1.4.1.89.87.2.1.6,RADLAN-COPY-MIB::rlCopySourceFileName,OCTET,read-write,,current,,The name of the source file.
.1.3.6.1.4.1.89.87.2.1.7,RADLAN-COPY-MIB::rlCopySourceFileType,INTEGER,read-write,,current,other(1):runningConfig(2):startupConfig(3):backupConfig(4):runningMibConfig(5):startupMibConfig(6):backupMibConfig(7):image(8):boot(9):null(10),The type of the source file.
.1.3.6.1.4.1.89.87.2.1.8,RADLAN-COPY-MIB::rlCopyDestinationLocation,INTEGER,read-write,,current,local(1):anotherUnit(2):tftp(3):xmodem(4):scp(5):serial(6),Destination File Location
.1.3.6.1.4.1.89.87.2.1.9,RADLAN-COPY-MIB::rlCopyDestinationIpAddress,IpAddress,read-write,,current,,The Ip address of the destination remote host
.1.3.6.1.4.1.89.87.2.1.10,RADLAN-COPY-MIB::rlCopyDestinationUnitNumber,INTEGER,read-write,,current,,The unit number of the destination unit, value 257 means all units
.1.3.6.1.4.1.89.87.2.1.11,RADLAN-COPY-MIB::rlCopyDestinationFileName,OCTET,read-write,,current,,The name of the destination file.
.1.3.6.1.4.1.89.87.2.1.12,RADLAN-COPY-MIB::rlCopyDestinationFileType,INTEGER,read-write,,current,other(1):runningConfig(2):startupConfig(3):backupConfig(4):runningMibConfig(5):startupMibConfig(6):backupMibConfig(7):image(8):boot(9):null(10),The type of the destination file.
.1.3.6.1.4.1.89.87.2.1.13,RADLAN-COPY-MIB::rlCopyUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.4.1.89.87.2.1.14,RADLAN-COPY-MIB::rlCopyOperationState,INTEGER,read-only,,current,uploadInProgress(1):downloadInProgress(2):copyFailed(3):copyTimedout(4):copyFinished(5),The state of the copy operation.
.1.3.6.1.4.1.89.87.2.1.15,RADLAN-COPY-MIB::rlCopyBytesTransferred,INTEGER,read-only,,current,,The number of bytes that were transferred by the copy operation.
.1.3.6.1.4.1.89.87.2.1.16,RADLAN-COPY-MIB::rlCopyInBackground,INTEGER,read-write,,current,enable(1):disable(2),When enabled the copy operation is done in the background.
.1.3.6.1.4.1.89.87.2.1.17,RADLAN-COPY-MIB::rlCopyRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to insert or delete an entry
.1.3.6.1.4.1.89.87.2.1.18,RADLAN-COPY-MIB::rlCopyHistoryIndex,INTEGER,read-write,,current,,The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.
.1.3.6.1.4.1.89.87.3,RADLAN-COPY-MIB::rlCopyFreeHistoryIndex,INTEGER,read-only,,current,,Gives the next free index in the rlCopyHistoryTable (i.e., the next available value for rlCopyHistoryHistoryIndex)
.1.3.6.1.4.1.89.87.4,RADLAN-COPY-MIB::rlCopyHistoryTable,,not-accessible,,current,, The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
.1.3.6.1.4.1.89.87.4.1,RADLAN-COPY-MIB::rlCopyHistoryEntry,,not-accessible,rlCopyHistoryHistoryIndex,current,, An entry (conceptual row) in the rlCopyHistoryTable.
.1.3.6.1.4.1.89.87.4.1.1,RADLAN-COPY-MIB::rlCopyHistoryHistoryIndex,INTEGER,read-only,,current,,The row index in the table.
.1.3.6.1.4.1.89.87.4.1.2,RADLAN-COPY-MIB::rlCopyHistoryApplicationId,INTEGER,read-only,,current,mcli(1):cli(2):ewb(3):nms(4):initerm(5):serial(6),The application that activated this comand
.1.3.6.1.4.1.89.87.4.1.3,RADLAN-COPY-MIB::rlCopyHistorySourceLocation,INTEGER,read-write,,current,local(1):anotherUnit(2):tftp(3):xmodem(4):scp(5):serial(6),Source File Location
.1.3.6.1.4.1.89.87.4.1.4,RADLAN-COPY-MIB::rlCopyHistorySourceIpAddress,IpAddress,read-write,,current,,The IP address of the source remote host
.1.3.6.1.4.1.89.87.4.1.5,RADLAN-COPY-MIB::rlCopyHistorySourceUnitNumber,INTEGER,read-write,,current,,The unit number of the source unit
.1.3.6.1.4.1.89.87.4.1.6,RADLAN-COPY-MIB::rlCopyHistorySourceFileName,OCTET,read-write,,current,,The name of the source file.
.1.3.6.1.4.1.89.87.4.1.7,RADLAN-COPY-MIB::rlCopyHistorySourceFileType,INTEGER,read-write,,current,other(1):runningConfig(2):startupConfig(3):backupConfig(4):runningMibConfig(5):startupMibConfig(6):backupMibConfig(7):image(8):boot(9):null(10),The type of the source file.
.1.3.6.1.4.1.89.87.4.1.8,RADLAN-COPY-MIB::rlCopyHistoryDestinationLocation,INTEGER,read-write,,current,local(1):anotherUnit(2):tftp(3):xmodem(4):scp(5):serial(6),Destination File Location
.1.3.6.1.4.1.89.87.4.1.9,RADLAN-COPY-MIB::rlCopyHistoryDestinationIpAddress,IpAddress,read-write,,current,,The IP address of the destination remote host
.1.3.6.1.4.1.89.87.4.1.10,RADLAN-COPY-MIB::rlCopyHistoryDestinationUnitNumber,INTEGER,read-write,,current,,The unit number of the destination unit
.1.3.6.1.4.1.89.87.4.1.11,RADLAN-COPY-MIB::rlCopyHistoryDestinationFileName,OCTET,read-write,,current,,The name of the destination file.
.1.3.6.1.4.1.89.87.4.1.12,RADLAN-COPY-MIB::rlCopyHistoryDestinationFileType,INTEGER,read-write,,current,other(1):runningConfig(2):startupConfig(3):backupConfig(4):runningMibConfig(5):startupMibConfig(6):backupMibConfig(7):image(8):boot(9):null(10),The type of the destination file.
.1.3.6.1.4.1.89.87.4.1.13,RADLAN-COPY-MIB::rlCopyHistoryUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.4.1.89.87.4.1.14,RADLAN-COPY-MIB::rlCopyHistoryOperationState,INTEGER,read-only,,current,uploadInProgress(1):downloadInProgress(2):copyFailed(3):copyTimedout(4):copyFinished(5),The state of the copy operation.
.1.3.6.1.4.1.89.87.4.1.15,RADLAN-COPY-MIB::rlCopyHistoryBytesTransferred,INTEGER,read-only,,current,,The number of bytes that were transferred by the copy operation.
.1.3.6.1.4.1.89.87.4.1.16,RADLAN-COPY-MIB::rlCopyHistoryInBackground,INTEGER,read-write,,current,enable(1):disable(2),When enabled the copy operation is done in the background.
.1.3.6.1.4.1.89.87.4.1.17,RADLAN-COPY-MIB::rlCopyHistoryRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.
.1.3.6.1.4.1.89.87.4.1.18,RADLAN-COPY-MIB::rlCopyHistoryErrorMessage,OCTET,read-only,,current,,Error message as a result of failed copy action.
.1.3.6.1.4.1.89.87.5,RADLAN-COPY-MIB::rlCopyAuditingEnable,INTEGER,read-write,,current,true(1):false(2),Controls whether SysLog messages should be issued on file copy events
.1.3.6.1.4.1.89.88,RADLAN-MIB::rlQosCliMib,,,,,,
.1.3.6.1.4.1.89.88.1,RADLAN-QOS-CLI-MIB::rlQosCliQosMode,INTEGER,read-write,,current,disable(1):basic(2):advance(3):service(4),This scalar define in which mode the system will work: basic , advance or none.
.1.3.6.1.4.1.89.88.2,RADLAN-QOS-CLI-MIB::rlQosCliBasicModeCfg,INTEGER,read-write,,current,none(1):vpt(2):dscp(3):dscp-mutation(4):tcp-udp(5),This scalar define in which Basic mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none.
.1.3.6.1.4.1.89.88.3,RADLAN-QOS-CLI-MIB::rlQosMaxNumOfAce,INTEGER,read-write,,current,,This scalar define in which Basic mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none.
.1.3.6.1.4.1.89.88.4,RADLAN-QOS-CLI-MIB::rlQosOffsetTable,,not-accessible,,current,,This table specifies Offset Table information
.1.3.6.1.4.1.89.88.4.1,RADLAN-QOS-CLI-MIB::rlQosOffsetEntry,,not-accessible,rlQosOffsetIndex,current,,Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex
.1.3.6.1.4.1.89.88.4.1.1,RADLAN-QOS-CLI-MIB::rlQosOffsetIndex,INTEGER,not-accessible,,current,,An arbitrary incremental Index for the offset table.
.1.3.6.1.4.1.89.88.4.1.2,RADLAN-QOS-CLI-MIB::rlQosOffsetType,INTEGER,read-create,,current,packetStart(1):layer2-start(2):mpls-start(3):layer3-start(4):layer4-start(5):layer5-start(6):vlan(7):in-port(8):out-port(9),Start of the offset.
.1.3.6.1.4.1.89.88.4.1.3,RADLAN-QOS-CLI-MIB::rlQosOffsetValue,INTEGER,read-create,,current,,The Offset value.
.1.3.6.1.4.1.89.88.4.1.4,RADLAN-QOS-CLI-MIB::rlQosOffsetMask,INTEGER,read-create,,current,,Define which bit to be extracted from the offset.
.1.3.6.1.4.1.89.88.4.1.5,RADLAN-QOS-CLI-MIB::rlQosOffsetPattern,INTEGER,read-create,,current,,The value to match too.
.1.3.6.1.4.1.89.88.4.1.6,RADLAN-QOS-CLI-MIB::rlQosOffsetTuplePointer,INTEGER,read-create,,current,,Pointer for the relevant Tuple.
.1.3.6.1.4.1.89.88.4.1.7,RADLAN-QOS-CLI-MIB::rlQosOffsetStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.5,RADLAN-QOS-CLI-MIB::rlQosTupleTable,,not-accessible,,current,,This table specifies Tuple Table information
.1.3.6.1.4.1.89.88.5.1,RADLAN-QOS-CLI-MIB::rlQosTupleEntry,,not-accessible,rlQosTupleIndex,current,,Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex
.1.3.6.1.4.1.89.88.5.1.1,RADLAN-QOS-CLI-MIB::rlQosTupleIndex,INTEGER,not-accessible,,current,,An arbitrary incremental Index for the offset table.
.1.3.6.1.4.1.89.88.5.1.2,RADLAN-QOS-CLI-MIB::rlQosTupleType,INTEGER,read-create,,current,protocol(1):ip-src(2):ip-dest(3):dscp(4):ip-precedence(5):udp-port-src(6):udp-port-dest(7):tcp-port-src(8):tcp-port-dest(9):mac-src(10):mac-dest(11):vlan(12):in-port(13):out-port(14):general(15),Start of the offset.
.1.3.6.1.4.1.89.88.5.1.3,RADLAN-QOS-CLI-MIB::rlQosTupleValue1,INTEGER,read-create,,current,,The Tuple no.1 value can be regular integer values only.
.1.3.6.1.4.1.89.88.5.1.4,RADLAN-QOS-CLI-MIB::rlQosTupleValue2,OCTET,read-create,,current,,The Tuple no.2 value can be IP/MAC address or protocol number with mask
.1.3.6.1.4.1.89.88.5.1.5,RADLAN-QOS-CLI-MIB::rlQosTupleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.6,RADLAN-QOS-CLI-MIB::rlQosAceTable,,not-accessible,,current,,This table specifies ACE table information
.1.3.6.1.4.1.89.88.6.1,RADLAN-QOS-CLI-MIB::rlQosAceEntry,,not-accessible,rlQosAceIndex,current,,Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex
.1.3.6.1.4.1.89.88.6.1.1,RADLAN-QOS-CLI-MIB::rlQosAceIndex,INTEGER,not-accessible,,current,,An arbitrary incremental Index for the ACE table.
.1.3.6.1.4.1.89.88.6.1.2,RADLAN-QOS-CLI-MIB::rlQosAceAction,INTEGER,read-create,,current,permit(1):deny(2):deny-DisablePort(3),ACE Action to take.
.1.3.6.1.4.1.89.88.6.1.3,RADLAN-QOS-CLI-MIB::rlQosAceType,INTEGER,read-create,,current,ip(1):ip-TCP(2):ip-UDP(3):ip-Offset(4):mac(5):mac-Offset(6),ACE Type
.1.3.6.1.4.1.89.88.6.1.4,RADLAN-QOS-CLI-MIB::rlQosAceTuple1,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.5,RADLAN-QOS-CLI-MIB::rlQosAceTuple2,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.6,RADLAN-QOS-CLI-MIB::rlQosAceTuple3,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.7,RADLAN-QOS-CLI-MIB::rlQosAceTuple4,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.8,RADLAN-QOS-CLI-MIB::rlQosAceTuple5,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.9,RADLAN-QOS-CLI-MIB::rlQosAceTuple6,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.10,RADLAN-QOS-CLI-MIB::rlQosAceTuple7,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.11,RADLAN-QOS-CLI-MIB::rlQosAceTuple8,INTEGER,read-create,,current,,ACE Tuple 1 pointer.
.1.3.6.1.4.1.89.88.6.1.12,RADLAN-QOS-CLI-MIB::rlQosAceAccount,INTEGER,read-create,,current,disable(1):enable(2),ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. For Broadcom ASICs this counter shows number of matched with ACE criteria packets. For Marvell ASICs TBD.
.1.3.6.1.4.1.89.88.6.1.13,RADLAN-QOS-CLI-MIB::rlQosAceStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.7,RADLAN-QOS-CLI-MIB::rlQosAclTable,,not-accessible,,current,,This table specifies ACL table information
.1.3.6.1.4.1.89.88.7.1,RADLAN-QOS-CLI-MIB::rlQosAclEntry,,not-accessible,rlQosAclIndex,current,,Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex
.1.3.6.1.4.1.89.88.7.1.1,RADLAN-QOS-CLI-MIB::rlQosAclIndex,INTEGER,not-accessible,,current,,An arbitrary incremental Index for the ACE table.
.1.3.6.1.4.1.89.88.7.1.2,RADLAN-QOS-CLI-MIB::rlQosAclName,OCTET,read-create,,current,,Name ACL.
.1.3.6.1.4.1.89.88.7.1.3,RADLAN-QOS-CLI-MIB::rlQosAclType,INTEGER,read-create,,current,mac(1):ip(2),ACL Type.
.1.3.6.1.4.1.89.88.7.1.4,RADLAN-QOS-CLI-MIB::rlQosAclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.8,RADLAN-QOS-CLI-MIB::rlQosAclAceRefTable,,not-accessible,,current,,This table specifies the ACE to ACL relationship.
.1.3.6.1.4.1.89.88.8.1,RADLAN-QOS-CLI-MIB::rlQosAclAceRefEntry,,not-accessible,rlQosAclAceRefAcePointer,current,,Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer
.1.3.6.1.4.1.89.88.8.1.1,RADLAN-QOS-CLI-MIB::rlQosAclAceRefAcePointer,INTEGER,not-accessible,,current,,The Index is the ACE pointer
.1.3.6.1.4.1.89.88.8.1.2,RADLAN-QOS-CLI-MIB::rlQosAclAceRefAclPointer,INTEGER,read-create,,current,,ACL index Pointer
.1.3.6.1.4.1.89.88.8.1.3,RADLAN-QOS-CLI-MIB::rlQosAclAceRefStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.9,RADLAN-QOS-CLI-MIB::rlQosClassMapTable,,not-accessible,,current,,This table specifies CCL table information
.1.3.6.1.4.1.89.88.9.1,RADLAN-QOS-CLI-MIB::rlQosClassMapEntry,,not-accessible,rlQosClassMapIndex,current,,Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex
.1.3.6.1.4.1.89.88.9.1.1,RADLAN-QOS-CLI-MIB::rlQosClassMapIndex,INTEGER,not-accessible,,current,,Class Map Index
.1.3.6.1.4.1.89.88.9.1.2,RADLAN-QOS-CLI-MIB::rlQosClassMapName,OCTET,read-create,,current,,Name of the Class Map.
.1.3.6.1.4.1.89.88.9.1.3,RADLAN-QOS-CLI-MIB::rlQosClassMapType,INTEGER,read-create,,current,matchAll(1):matchAny(2),Class map type
.1.3.6.1.4.1.89.88.9.1.4,RADLAN-QOS-CLI-MIB::rlQosClassMapAction,INTEGER,read-create,,current,none(1):setIP-Precedence(2):setDSCP(3):setQueue(4):setCos(5):trustCos(6):trustDSCP(7):trustTCP-UDPport(8),Class Map Action.
.1.3.6.1.4.1.89.88.9.1.5,RADLAN-QOS-CLI-MIB::rlQosClassMapMarkValue,INTEGER,read-create,,current,,Mark value when mark action has been chosen in Class Map Action field.
.1.3.6.1.4.1.89.88.9.1.6,RADLAN-QOS-CLI-MIB::rlQosClassMapPolicer,INTEGER,read-create,,current,,Policer pointer. 0-means no policer.
.1.3.6.1.4.1.89.88.9.1.7,RADLAN-QOS-CLI-MIB::rlQosClassMapMatch1,INTEGER,read-create,,current,,Match ACL 1 pointer.
.1.3.6.1.4.1.89.88.9.1.8,RADLAN-QOS-CLI-MIB::rlQosClassMapMatch2,INTEGER,read-create,,current,,Match ACL 2 pointer.
.1.3.6.1.4.1.89.88.9.1.9,RADLAN-QOS-CLI-MIB::rlQosClassMapMarkVlan,INTEGER,read-create,,current,disable(1):enable(2),If 'enabled', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed.
.1.3.6.1.4.1.89.88.9.1.10,RADLAN-QOS-CLI-MIB::rlQosClassMapNewVlan,INTEGER,read-create,,current,,If rlQosClassMapMarkVlan 'enabled', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id.
.1.3.6.1.4.1.89.88.9.1.11,RADLAN-QOS-CLI-MIB::rlQosClassMapNewPort,INTEGER,read-create,,current,,If value not zero, than the classified traffic will be redirected to the new egress physical port. The value of this field sets new egress port.
.1.3.6.1.4.1.89.88.9.1.12,RADLAN-QOS-CLI-MIB::rlQosClassMapCopyPort,INTEGER,read-create,,current,,If value not zero, than the classified traffic will be copied to the desination copy port. The value of this field sets desination copy port.
.1.3.6.1.4.1.89.88.9.1.13,RADLAN-QOS-CLI-MIB::rlQosClassMapStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.10,RADLAN-QOS-CLI-MIB::rlQosPolicerTable,,not-accessible,,current,,This table specifies All the Policers in the system Information
.1.3.6.1.4.1.89.88.10.1,RADLAN-QOS-CLI-MIB::rlQosPolicerEntry,,not-accessible,rlQosPolicerIndex,current,,Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex
.1.3.6.1.4.1.89.88.10.1.1,RADLAN-QOS-CLI-MIB::rlQosPolicerIndex,INTEGER,not-accessible,,current,,Policer Index.
.1.3.6.1.4.1.89.88.10.1.2,RADLAN-QOS-CLI-MIB::rlQosPolicerName,OCTET,read-create,,current,,Name of the Policer.
.1.3.6.1.4.1.89.88.10.1.3,RADLAN-QOS-CLI-MIB::rlQosPolicerType,INTEGER,read-create,,current,single(1):aggregate(2):cascade(3),Policer type
.1.3.6.1.4.1.89.88.10.1.4,RADLAN-QOS-CLI-MIB::rlQosPolicerCir,Unsigned32,read-create,,current,,Committed rate value.
.1.3.6.1.4.1.89.88.10.1.5,RADLAN-QOS-CLI-MIB::rlQosPolicerCbs,Unsigned32,read-create,,current,,Committed rate Value.
.1.3.6.1.4.1.89.88.10.1.6,RADLAN-QOS-CLI-MIB::rlQosPolicerAction,INTEGER,read-create,,current,none(1):drop(2):remark(3):explicit-remark(4):cascadePointer(5),Out of profile Action.
.1.3.6.1.4.1.89.88.10.1.7,RADLAN-QOS-CLI-MIB::rlQosPolicerCasPointerRemVal,INTEGER,read-create,,current,,Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark
.1.3.6.1.4.1.89.88.10.1.8,RADLAN-QOS-CLI-MIB::rlQosPolicerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.11,RADLAN-QOS-CLI-MIB::rlQosPolicyMapTable,,not-accessible,,current,,This table specifies Policy Map Table Information
.1.3.6.1.4.1.89.88.11.1,RADLAN-QOS-CLI-MIB::rlQosPolicyMapEntry,,not-accessible,rlQosPolicyMapIndex,current,,Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex
.1.3.6.1.4.1.89.88.11.1.1,RADLAN-QOS-CLI-MIB::rlQosPolicyMapIndex,INTEGER,not-accessible,,current,,Policy map Index.
.1.3.6.1.4.1.89.88.11.1.2,RADLAN-QOS-CLI-MIB::rlQosPolicyMapName,OCTET,read-create,,current,,Policy map Name.
.1.3.6.1.4.1.89.88.11.1.3,RADLAN-QOS-CLI-MIB::rlQosPolicyMapStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.12,RADLAN-QOS-CLI-MIB::rlQosPolicyClassRefTable,,not-accessible,,current,,This table specifies The relationship between policy map to class map
.1.3.6.1.4.1.89.88.12.1,RADLAN-QOS-CLI-MIB::rlQosPolicyClassRefEntry,,not-accessible,rlQosPolicyClassRefClassPointer,current,,Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer
.1.3.6.1.4.1.89.88.12.1.1,RADLAN-QOS-CLI-MIB::rlQosPolicyClassRefClassPointer,INTEGER,not-accessible,,current,,The Index is the Class-map pointer
.1.3.6.1.4.1.89.88.12.1.2,RADLAN-QOS-CLI-MIB::rlQosPolicyClassRefPolicyPointer,INTEGER,read-create,,current,,Policy map index Pointer
.1.3.6.1.4.1.89.88.12.1.3,RADLAN-QOS-CLI-MIB::rlQosPolicyClassRefStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.13,RADLAN-QOS-CLI-MIB::rlQosIfPolicyTable,,not-accessible,,current,,This table specifies for each interface the Policy Map attach to it
.1.3.6.1.4.1.89.88.13.1,RADLAN-QOS-CLI-MIB::rlQosIfPolicyEntry,,not-accessible,rlIfIndex:rlIfType,current,,Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType
.1.3.6.1.4.1.89.88.13.1.1,RADLAN-QOS-CLI-MIB::rlIfIndex,Integer32,not-accessible,,current,,Interface Index.
.1.3.6.1.4.1.89.88.13.1.2,RADLAN-QOS-CLI-MIB::rlIfType,INTEGER,not-accessible,,current,vlan(1):port(2),Interface Type(vlan/port).
.1.3.6.1.4.1.89.88.13.1.3,RADLAN-QOS-CLI-MIB::rlQosIfPolicyMapPointerIn,INTEGER,read-create,,current,,Policy map pointer Input.
.1.3.6.1.4.1.89.88.13.1.4,RADLAN-QOS-CLI-MIB::rlQosIfPolicyMapPointerOut,INTEGER,read-create,,current,,Policy map pointer Output.
.1.3.6.1.4.1.89.88.13.1.5,RADLAN-QOS-CLI-MIB::rlQosIfTrustActive,INTEGER,read-create,,current,disable(1):enable(2),Interface Basic Mode Trust is active or not .
.1.3.6.1.4.1.89.88.13.1.6,RADLAN-QOS-CLI-MIB::rlQosPortShaperStatus,INTEGER,read-create,,current,disable(1):enable(2),If there is shaper on the port
.1.3.6.1.4.1.89.88.13.1.7,RADLAN-QOS-CLI-MIB::rlQosCirPortShaper,INTEGER,read-create,,current,,The CIR for the port shaper. N/A when the shper is disabled
.1.3.6.1.4.1.89.88.13.1.8,RADLAN-QOS-CLI-MIB::rlQosCbsPortShaper,INTEGER,read-create,,current,,The CBS for the port shaper. N/A when the shper is disabled
.1.3.6.1.4.1.89.88.13.1.9,RADLAN-QOS-CLI-MIB::rlQosIfProfilePointer,OCTET,read-create,,current,,Interface Profile name pointer.
.1.3.6.1.4.1.89.88.13.1.10,RADLAN-QOS-CLI-MIB::rlQosQueueProfilePointer,OCTET,read-create,,current,, Queue Profile name pointer.
.1.3.6.1.4.1.89.88.13.1.11,RADLAN-QOS-CLI-MIB::rlQosQueueShapeProfilePointer,INTEGER,read-create,,current,, Queue shape Profile pointer.
.1.3.6.1.4.1.89.88.13.1.12,RADLAN-QOS-CLI-MIB::rlQosAclDefaultAction,INTEGER,read-create,,current,deny-all(1):forward-all(2), When one ACL is enterd then what to do for the last rull.
.1.3.6.1.4.1.89.88.13.1.13,RADLAN-QOS-CLI-MIB::rlQosIfPolicyMapStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.13.1.14,RADLAN-QOS-CLI-MIB::rlQosIfAclIn,INTEGER,read-create,,current,,Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
.1.3.6.1.4.1.89.88.13.1.15,RADLAN-QOS-CLI-MIB::rlQosIfAclOut,INTEGER,read-create,,current,,Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
.1.3.6.1.4.1.89.88.13.1.16,RADLAN-QOS-CLI-MIB::rlQosIfPolicerIn,INTEGER,read-create,,current,,Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied.
.1.3.6.1.4.1.89.88.14,RADLAN-QOS-CLI-MIB::rlQosIfProfileCfgTable,,not-accessible,,current,,This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters.
.1.3.6.1.4.1.89.88.14.1,RADLAN-QOS-CLI-MIB::rlQosIfProfileCfgEntry,,not-accessible,rlIfProfileName:rlQosQueueId,current,,Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId
.1.3.6.1.4.1.89.88.14.1.1,RADLAN-QOS-CLI-MIB::rlIfProfileName,OCTET,not-accessible,,current,,Interface Index.
.1.3.6.1.4.1.89.88.14.1.2,RADLAN-QOS-CLI-MIB::rlQosQueueId,INTEGER,not-accessible,,current,,Queue id Index.
.1.3.6.1.4.1.89.88.14.1.3,RADLAN-QOS-CLI-MIB::rlQosTdThersholdDp0,INTEGER,read-create,,current,,Tail Drop Threshold for Drop Precedence 0.
.1.3.6.1.4.1.89.88.14.1.4,RADLAN-QOS-CLI-MIB::rlQosTdThersholdDp1,INTEGER,read-create,,current,,Tail Drop Threshold for Drop Precedence 1.
.1.3.6.1.4.1.89.88.14.1.5,RADLAN-QOS-CLI-MIB::rlQosTdThersholdDp2,INTEGER,read-create,,current,,Tail Drop Threshold for Drop Precedence 2.
.1.3.6.1.4.1.89.88.14.1.6,RADLAN-QOS-CLI-MIB::rlQosRedMinDp0,INTEGER,read-create,,current,,WRED Min Threshold for Drop Precedence 2.
.1.3.6.1.4.1.89.88.14.1.7,RADLAN-QOS-CLI-MIB::rlQosRedMaxDp0,INTEGER,read-create,,current,,WRED Max Threshold for Drop Precedence 0.
.1.3.6.1.4.1.89.88.14.1.8,RADLAN-QOS-CLI-MIB::rlQosRedProbDp0,INTEGER,read-create,,current,,WRED probability for Drop Precedence 0.
.1.3.6.1.4.1.89.88.14.1.9,RADLAN-QOS-CLI-MIB::rlQosRedMinDp1,INTEGER,read-create,,current,,WRED Min Threshold for Drop Precedence 2.
.1.3.6.1.4.1.89.88.14.1.10,RADLAN-QOS-CLI-MIB::rlQosRedMaxDp1,INTEGER,read-create,,current,,WRED Max Threshold for Drop Precedence 1.
.1.3.6.1.4.1.89.88.14.1.11,RADLAN-QOS-CLI-MIB::rlQosRedProbDp1,INTEGER,read-create,,current,,WRED probability for Drop Precedence 1.
.1.3.6.1.4.1.89.88.14.1.12,RADLAN-QOS-CLI-MIB::rlQosRedMinDp2,INTEGER,read-create,,current,,WRED Min Threshold for Drop Precedence 2.
.1.3.6.1.4.1.89.88.14.1.13,RADLAN-QOS-CLI-MIB::rlQosRedMaxDp2,INTEGER,read-create,,current,,WRED Max Threshold for Drop Precedence 2.
.1.3.6.1.4.1.89.88.14.1.14,RADLAN-QOS-CLI-MIB::rlQosRedProbDp2,INTEGER,read-create,,current,,WRED probability for Drop Precedence 2.
.1.3.6.1.4.1.89.88.14.1.15,RADLAN-QOS-CLI-MIB::rlQosRedQweight,INTEGER,read-create,,current,,Q factor for WRED.
.1.3.6.1.4.1.89.88.14.1.16,RADLAN-QOS-CLI-MIB::rlQosIfprofileStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.15,RADLAN-QOS-CLI-MIB::rlQosDscpMutationTable,,not-accessible,,current,,This table specifies The DSCP Mutation table
.1.3.6.1.4.1.89.88.15.1,RADLAN-QOS-CLI-MIB::rlQosDscpMutationEntry,,not-accessible,rlQosOldDscp,current,,Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
.1.3.6.1.4.1.89.88.15.1.1,RADLAN-QOS-CLI-MIB::rlQosOldDscp,INTEGER,not-accessible,,current,,Old DSCP.
.1.3.6.1.4.1.89.88.15.1.2,RADLAN-QOS-CLI-MIB::rlQosNewDscp,INTEGER,read-create,,current,,New DSCP.
.1.3.6.1.4.1.89.88.16,RADLAN-QOS-CLI-MIB::rlQosDscpRemarkTable,,not-accessible,,current,,This table specifies The DSCP Remark table
.1.3.6.1.4.1.89.88.16.1,RADLAN-QOS-CLI-MIB::rlQosDscpRemarkEntry,,not-accessible,rlQosRmOldDscp,current,,Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
.1.3.6.1.4.1.89.88.16.1.1,RADLAN-QOS-CLI-MIB::rlQosRmOldDscp,INTEGER,not-accessible,,current,,Old DSCP.
.1.3.6.1.4.1.89.88.16.1.2,RADLAN-QOS-CLI-MIB::rlQosRmNewDscp,INTEGER,read-create,,current,,New DSCP.
.1.3.6.1.4.1.89.88.17,RADLAN-QOS-CLI-MIB::rlQosCosQueueTable,,not-accessible,,current,,This table specifies The Cos to queue map table
.1.3.6.1.4.1.89.88.17.1,RADLAN-QOS-CLI-MIB::rlQosCosQueueEntry,,not-accessible,rlQosCosIndex,current,,Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex
.1.3.6.1.4.1.89.88.17.1.1,RADLAN-QOS-CLI-MIB::rlQosCosIndex,INTEGER,not-accessible,,current,,CoS value (0-7).
.1.3.6.1.4.1.89.88.17.1.2,RADLAN-QOS-CLI-MIB::rlQosCosQueueId,INTEGER,read-create,,current,,Queue ID.
.1.3.6.1.4.1.89.88.18,RADLAN-QOS-CLI-MIB::rlQosDscpQueueTable,,not-accessible,,current,,This table specifies The DSCP to Queue map table
.1.3.6.1.4.1.89.88.18.1,RADLAN-QOS-CLI-MIB::rlQosDscpQueueEntry,,not-accessible,rlQosDscpIndex,current,,Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex
.1.3.6.1.4.1.89.88.18.1.1,RADLAN-QOS-CLI-MIB::rlQosDscpIndex,INTEGER,not-accessible,,current,,DSCP value.
.1.3.6.1.4.1.89.88.18.1.2,RADLAN-QOS-CLI-MIB::rlQosQueueNum,INTEGER,read-create,,current,,Queue Number.
.1.3.6.1.4.1.89.88.19,RADLAN-QOS-CLI-MIB::rlQosTcpPortQueueTable,,not-accessible,,current,,This table specifies TCP Port to Queue map table
.1.3.6.1.4.1.89.88.19.1,RADLAN-QOS-CLI-MIB::rlQosTcpPortQueueEntry,,not-accessible,rlQosTcpPort,current,,Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort
.1.3.6.1.4.1.89.88.19.1.1,RADLAN-QOS-CLI-MIB::rlQosTcpPort,INTEGER,not-accessible,,current,,TCP port number.
.1.3.6.1.4.1.89.88.19.1.2,RADLAN-QOS-CLI-MIB::rlQosTcpQueueValue,INTEGER,read-create,,current,,Queue Number.
.1.3.6.1.4.1.89.88.19.1.3,RADLAN-QOS-CLI-MIB::rlQosTcpPortQueueStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.20,RADLAN-QOS-CLI-MIB::rlQosUdpPortQueueTable,,not-accessible,,current,,This table specifies UDP Port to Queue map table
.1.3.6.1.4.1.89.88.20.1,RADLAN-QOS-CLI-MIB::rlQosUdpPortQueueEntry,,not-accessible,rlQosUdpPort,current,,Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort
.1.3.6.1.4.1.89.88.20.1.1,RADLAN-QOS-CLI-MIB::rlQosUdpPort,INTEGER,not-accessible,,current,,UDP port number.
.1.3.6.1.4.1.89.88.20.1.2,RADLAN-QOS-CLI-MIB::rlQosUdpQueueValue,INTEGER,read-create,,current,,Queue value.
.1.3.6.1.4.1.89.88.20.1.3,RADLAN-QOS-CLI-MIB::rlQosUdpPortQueueStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.21,RADLAN-QOS-CLI-MIB::rlQosEfManageTable,,not-accessible,,current,,This table specifies UDP Port to DSCP map table
.1.3.6.1.4.1.89.88.21.1,RADLAN-QOS-CLI-MIB::rlQosEfManageEntry,,not-accessible,rlQosEfQueueId,current,,This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId
.1.3.6.1.4.1.89.88.21.1.1,RADLAN-QOS-CLI-MIB::rlQosEfQueueId,INTEGER,not-accessible,,current,,Queue-ID.
.1.3.6.1.4.1.89.88.21.1.2,RADLAN-QOS-CLI-MIB::rlQosEfState,INTEGER,read-create,,current,disable(1):enable(2),Enable/disable
.1.3.6.1.4.1.89.88.21.1.3,RADLAN-QOS-CLI-MIB::rlQosEfPriority,INTEGER,read-create,,current,,The priority of the queue
.1.3.6.1.4.1.89.88.22,RADLAN-QOS-CLI-MIB::rlQosQueueProfileTable,,not-accessible,,current,,This table describes the queue managment profiles 
.1.3.6.1.4.1.89.88.22.1,RADLAN-QOS-CLI-MIB::rlQosQueueProfileEntry,,not-accessible,rlQueueProfileName,current,,Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName
.1.3.6.1.4.1.89.88.22.1.1,RADLAN-QOS-CLI-MIB::rlQueueProfileName,OCTET,not-accessible,,current,,Profile name for the Queue profile.
.1.3.6.1.4.1.89.88.22.1.2,RADLAN-QOS-CLI-MIB::rlQosTypeQueue1,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.3,RADLAN-QOS-CLI-MIB::rlQosValueQueue1,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.4,RADLAN-QOS-CLI-MIB::rlQosTypeQueue2,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.5,RADLAN-QOS-CLI-MIB::rlQosValueQueue2,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.6,RADLAN-QOS-CLI-MIB::rlQosTypeQueue3,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.7,RADLAN-QOS-CLI-MIB::rlQosValueQueue3,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.8,RADLAN-QOS-CLI-MIB::rlQosTypeQueue4,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.9,RADLAN-QOS-CLI-MIB::rlQosValueQueue4,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.10,RADLAN-QOS-CLI-MIB::rlQosTypeQueue5,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.11,RADLAN-QOS-CLI-MIB::rlQosValueQueue5,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.12,RADLAN-QOS-CLI-MIB::rlQosTypeQueue6,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.13,RADLAN-QOS-CLI-MIB::rlQosValueQueue6,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.14,RADLAN-QOS-CLI-MIB::rlQosTypeQueue7,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.15,RADLAN-QOS-CLI-MIB::rlQosValueQueue7,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.16,RADLAN-QOS-CLI-MIB::rlQosTypeQueue8,INTEGER,read-only,,current,ef(1):wrr(2),EF or WRR
.1.3.6.1.4.1.89.88.22.1.17,RADLAN-QOS-CLI-MIB::rlQosValueQueue8,INTEGER,read-create,,current,,for EF read-only for wrr the weight
.1.3.6.1.4.1.89.88.22.1.18,RADLAN-QOS-CLI-MIB::rlQosQueueProfileStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.22.1.19,RADLAN-QOS-CLI-MIB::rlQosNumOfIfConnections,INTEGER,read-only,,current,,how many time this entry connected to the if policy table
.1.3.6.1.4.1.89.88.23,RADLAN-QOS-CLI-MIB::rlQosQueueShapeProfileTable,,not-accessible,,current,,This table specifies the queue shaper profile
.1.3.6.1.4.1.89.88.23.1,RADLAN-QOS-CLI-MIB::rlQosQueueShapeProfileEntry,,not-accessible,rlQosQueueShapeIndex,current,,Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex
.1.3.6.1.4.1.89.88.23.1.1,RADLAN-QOS-CLI-MIB::rlQosQueueShapeIndex,INTEGER,not-accessible,,current,,Profile Index.
.1.3.6.1.4.1.89.88.23.1.2,RADLAN-QOS-CLI-MIB::rlQosCirQueue1,INTEGER,read-create,,current,,CIR for Queue1 0 for not active
.1.3.6.1.4.1.89.88.23.1.3,RADLAN-QOS-CLI-MIB::rlQosCbsQueue1,INTEGER,read-create,,current,,CBS for Queue1 0 for not active
.1.3.6.1.4.1.89.88.23.1.4,RADLAN-QOS-CLI-MIB::rlQosCirQueue2,INTEGER,read-create,,current,,CIR for Queue2 0 for not active
.1.3.6.1.4.1.89.88.23.1.5,RADLAN-QOS-CLI-MIB::rlQosCbsQueue2,INTEGER,read-create,,current,,CBS for Queue2 0 for not active
.1.3.6.1.4.1.89.88.23.1.6,RADLAN-QOS-CLI-MIB::rlQosCirQueue3,INTEGER,read-create,,current,,CIR for Queue3 0 for not active
.1.3.6.1.4.1.89.88.23.1.7,RADLAN-QOS-CLI-MIB::rlQosCbsQueue3,INTEGER,read-create,,current,,CBS for Queue3 0 for not active
.1.3.6.1.4.1.89.88.23.1.8,RADLAN-QOS-CLI-MIB::rlQosCirQueue4,INTEGER,read-create,,current,,CIR for Queue4 0 for not active
.1.3.6.1.4.1.89.88.23.1.9,RADLAN-QOS-CLI-MIB::rlQosCbsQueue4,INTEGER,read-create,,current,,CBS for Queue4 0 for not active
.1.3.6.1.4.1.89.88.23.1.10,RADLAN-QOS-CLI-MIB::rlQosCirQueue5,INTEGER,read-create,,current,,CIR for Queue5 0 for not active
.1.3.6.1.4.1.89.88.23.1.11,RADLAN-QOS-CLI-MIB::rlQosCbsQueue5,INTEGER,read-create,,current,,CBS for Queue5 0 for not active
.1.3.6.1.4.1.89.88.23.1.12,RADLAN-QOS-CLI-MIB::rlQosCirQueue6,INTEGER,read-create,,current,,CIR for Queue6 0 for not active
.1.3.6.1.4.1.89.88.23.1.13,RADLAN-QOS-CLI-MIB::rlQosCbsQueue6,INTEGER,read-create,,current,,CBS for Queue6 0 for not active
.1.3.6.1.4.1.89.88.23.1.14,RADLAN-QOS-CLI-MIB::rlQosCirQueue7,INTEGER,read-create,,current,,CIR for Queue7 0 for not active
.1.3.6.1.4.1.89.88.23.1.15,RADLAN-QOS-CLI-MIB::rlQosCbsQueue7,INTEGER,read-create,,current,,CBS for Queue7 0 for not active
.1.3.6.1.4.1.89.88.23.1.16,RADLAN-QOS-CLI-MIB::rlQosCirQueue8,INTEGER,read-create,,current,,CIR for Queue8 0 for not active
.1.3.6.1.4.1.89.88.23.1.17,RADLAN-QOS-CLI-MIB::rlQosCbsQueue8,INTEGER,read-create,,current,,CBS for Queue8 0 for not active
.1.3.6.1.4.1.89.88.23.1.18,RADLAN-QOS-CLI-MIB::rlQosQueueShapeProfileStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.24,RADLAN-QOS-CLI-MIB::rlQosAclCounterTable,,not-accessible,,current,,The table is used to show statistics for ACL applied on an interface.
.1.3.6.1.4.1.89.88.24.1,RADLAN-QOS-CLI-MIB::rlQosAclCounterEntry,,not-accessible,rlQosAclCounterInterface:rlQosAclCounterAclIndex:rlQosAclCounterAceIndex,current,,This entry shows value of conter for a particular ACE of an ACL.
.1.3.6.1.4.1.89.88.24.1.1,RADLAN-QOS-CLI-MIB::rlQosAclCounterInterface,Integer32,read-only,,current,,Interface Index on which ACL is applied.
.1.3.6.1.4.1.89.88.24.1.2,RADLAN-QOS-CLI-MIB::rlQosAclCounterAclIndex,INTEGER,read-only,,current,,Index of ACL, which was applied on the IfIndex.
.1.3.6.1.4.1.89.88.24.1.3,RADLAN-QOS-CLI-MIB::rlQosAclCounterAceIndex,INTEGER,read-only,,current,,Index of ACE, which is belong to an ACL.
.1.3.6.1.4.1.89.88.24.1.4,RADLAN-QOS-CLI-MIB::rlQosAclCounterValue,Counter32,read-only,,current,,The value of the ACE counter. For Broadcom ASICs it shows number of matched packets. For Marvel ASICs -TBD.
.1.3.6.1.4.1.89.88.25,RADLAN-QOS-CLI-MIB::rlQosFreeIndexesTable,,not-accessible,,current,,The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases. 
.1.3.6.1.4.1.89.88.25.1,RADLAN-QOS-CLI-MIB::rlQosFreeIndexesEntry,,not-accessible,rlQosFreeIndexesTableId,current,,The entry is used to get free index for particular table.
.1.3.6.1.4.1.89.88.25.1.1,RADLAN-QOS-CLI-MIB::rlQosFreeIndexesTableId,INTEGER,read-only,,current,tuple(1):offset(2):ace(3):acl(4):class(5):policy(6):policer(7):shaper(8),Identification of the table, for which free index is retrieved.
.1.3.6.1.4.1.89.88.25.1.2,RADLAN-QOS-CLI-MIB::rlQosFreeIndexesValue,INTEGER,read-only,,current,,Free index for table. 0 means no free entries.
.1.3.6.1.4.1.89.88.26,RADLAN-QOS-CLI-MIB::rlQosNamesToIndexesTable,,not-accessible,,current,,The table is used to get the ACL,Class-Map and Policy-Map indexes from the name.
.1.3.6.1.4.1.89.88.26.1,RADLAN-QOS-CLI-MIB::rlQosNamesToIndexesEntry,,not-accessible,rlQosNamesToIndexesTableId:rlQosNamesToIndexesName,current,,The entry is used to get index form particular name and table type.
.1.3.6.1.4.1.89.88.26.1.1,RADLAN-QOS-CLI-MIB::rlQosNamesToIndexesTableId,INTEGER,not-accessible,,current,acl(1):class(2):policy(3):policer(4),Identification of the table, for which the index is retrieved.
.1.3.6.1.4.1.89.88.26.1.2,RADLAN-QOS-CLI-MIB::rlQosNamesToIndexesName,OCTET,not-accessible,,current,,The name of the entry
.1.3.6.1.4.1.89.88.26.1.3,RADLAN-QOS-CLI-MIB::rlQosNamesToIndexesValue,INTEGER,read-only,,current,,the index for table
.1.3.6.1.4.1.89.88.27,RADLAN-QOS-CLI-MIB::rlQosStackControlQueue,INTEGER,read-only,,current,,This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue.
.1.3.6.1.4.1.89.88.28,RADLAN-QOS-CLI-MIB::rlQosStackControlCos,INTEGER,read-only,,current,,This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue.
.1.3.6.1.4.1.89.88.29,RADLAN-QOS-CLI-MIB::rlQosCosQueueDefaultMapTable,,not-accessible,,current,,The table is used to set default 802.1p map (vpt to queue)
.1.3.6.1.4.1.89.88.29.1,RADLAN-QOS-CLI-MIB::rlQosCosQueueDefaultMapEntry,,not-accessible,rlQosCosQueueDefaultMapVpt,current,,The entry is used to get index form particular name and table type.
.1.3.6.1.4.1.89.88.29.1.1,RADLAN-QOS-CLI-MIB::rlQosCosQueueDefaultMapVpt,INTEGER,read-only,,current,,vlan priority tag , 3 bits of priority which determine the service class.
.1.3.6.1.4.1.89.88.29.1.2,RADLAN-QOS-CLI-MIB::rlQosCosQueueDefaultMapQueueId,INTEGER,read-only,,current,,the queue id vary from the first queue id to Max Number of queues supported
.1.3.6.1.4.1.89.88.30,RADLAN-QOS-CLI-MIB::rlQosPredefBlockAclTable,,not-accessible,,current,,The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs.
.1.3.6.1.4.1.89.88.30.1,RADLAN-QOS-CLI-MIB::rlQosPredefBlockAclEntry,,not-accessible,rlQosPredefBlockAclIfIndex:rlQosPredefBlockAclIfType,current,,The entry is used to apply predefined ACLs to the interface.
.1.3.6.1.4.1.89.88.30.1.1,RADLAN-QOS-CLI-MIB::rlQosPredefBlockAclIfIndex,Integer32,not-accessible,,current,,IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured.
.1.3.6.1.4.1.89.88.30.1.2,RADLAN-QOS-CLI-MIB::rlQosPredefBlockAclIfType,INTEGER,not-accessible,,current,vlan(1):port(2),Interface Type(vlan/port).
.1.3.6.1.4.1.89.88.30.1.3,RADLAN-QOS-CLI-MIB::rlQosPredefBlockAclMask,OCTET,read-create,,current,,This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames 
.1.3.6.1.4.1.89.88.30.1.4,RADLAN-QOS-CLI-MIB::rlQosPredefBlockAclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.31,RADLAN-QOS-CLI-MIB::rlQosAceTidxTable,,not-accessible,,current,,This table specifies ACE table with two index information
.1.3.6.1.4.1.89.88.31.1,RADLAN-QOS-CLI-MIB::rlQosAceTidxEntry,,not-accessible,rlQosAceTidxAclIndex:rlQosAceTidxIndex,current,,Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index
.1.3.6.1.4.1.89.88.31.1.1,RADLAN-QOS-CLI-MIB::rlQosAceTidxAclIndex,INTEGER,not-accessible,,current,,An arbitrary incremental Index for the ACL ACE connection.
.1.3.6.1.4.1.89.88.31.1.2,RADLAN-QOS-CLI-MIB::rlQosAceTidxIndex,INTEGER,not-accessible,,current,,An arbitrary incremental Index for the ACE table.
.1.3.6.1.4.1.89.88.31.1.3,RADLAN-QOS-CLI-MIB::rlQosAceTidxAction,INTEGER,read-create,,current,permit(1):deny(2):deny-DisablePort(3),ACE Action to take.
.1.3.6.1.4.1.89.88.31.1.4,RADLAN-QOS-CLI-MIB::rlQosAceTidxType,INTEGER,read-create,,current,ip(1):ip-TCP(2):ip-UDP(3):ip-Offset(4):mac(5):mac-Offset(6),ACE Type
.1.3.6.1.4.1.89.88.31.1.5,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple1,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.6,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple2,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.7,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple3,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.8,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple4,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.9,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple5,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.10,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple6,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.11,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple7,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.12,RADLAN-QOS-CLI-MIB::rlQosAceTidxTuple8,INTEGER,read-create,,current,,ACE Tuple pointer.
.1.3.6.1.4.1.89.88.31.1.13,RADLAN-QOS-CLI-MIB::rlQosAceTidxAccount,INTEGER,read-create,,current,disable(1):enable(2),ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. For Broadcom ASICs this counter shows number of matched with ACE criteria packets. For Marvell ASICs TBD.
.1.3.6.1.4.1.89.88.31.1.14,RADLAN-QOS-CLI-MIB::rlQosAceTidxStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.88.32,RADLAN-QOS-CLI-MIB::rlQosMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 4 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable
.1.3.6.1.4.1.89.88.33,RADLAN-QOS-CLI-MIB::rlQosDscpQueueDefaultMapTable,,not-accessible,,current,,The table is used to set default dscp to queue map
.1.3.6.1.4.1.89.88.33.1,RADLAN-QOS-CLI-MIB::rlQosDscpQueueDefaultMapEntry,,not-accessible,rlQosDscpQueueDefaultMapDscp,current,,The entry is used to get index form particular name and table type.
.1.3.6.1.4.1.89.88.33.1.1,RADLAN-QOS-CLI-MIB::rlQosDscpQueueDefaultMapDscp,INTEGER,read-only,,current,,dscp , 6 bits of priority which determine the service class.
.1.3.6.1.4.1.89.88.33.1.2,RADLAN-QOS-CLI-MIB::rlQosDscpQueueDefaultMapQueueId,INTEGER,read-only,,current,,the queue id vary from the first queue id to Max Number of queues supported
.1.3.6.1.4.1.89.89,RADLAN-MIB::rlMngInf,,,,,,
.1.3.6.1.4.1.89.89.1,RADLAN-MNGINF-MIB::rlMngInfMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.89.2,RADLAN-MNGINF-MIB::rlMngInfEnable,INTEGER,read-write,,current,true(1):false(2),The variable specifies if Management ACL functionality is enabled.
.1.3.6.1.4.1.89.89.3,RADLAN-MNGINF-MIB::rlMngInfActiveListName,OCTET,read-write,,current,,The currently activated Management ACL name
.1.3.6.1.4.1.89.89.4,RADLAN-MNGINF-MIB::rlMngInfListTable,,not-accessible,,current,,The table specifies all defined Access Lists definitions
.1.3.6.1.4.1.89.89.4.1,RADLAN-MNGINF-MIB::rlMngInfListEntry,,not-accessible,rlMngInfListName:rlMngInfListPriority,current,,Row definition for this table.
.1.3.6.1.4.1.89.89.4.1.1,RADLAN-MNGINF-MIB::rlMngInfListName,OCTET,read-only,,current,,The Name of the Access List.
.1.3.6.1.4.1.89.89.4.1.2,RADLAN-MNGINF-MIB::rlMngInfListPriority,Unsigned32,read-only,,current,,The Priority value.
.1.3.6.1.4.1.89.89.4.1.3,RADLAN-MNGINF-MIB::rlMngInfListIfIndex,Unsigned32,read-write,,current,,The IfIndex value. The IfIndex can be configured to be 0, which means don't care value.
.1.3.6.1.4.1.89.89.4.1.4,RADLAN-MNGINF-MIB::rlMngInfListIpAddr,IpAddress,read-write,,current,,The IP address. The IP address can be configured to be 0, which means don't care value.
.1.3.6.1.4.1.89.89.4.1.5,RADLAN-MNGINF-MIB::rlMngInfListIpNetMask,IpAddress,read-write,,current,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.4.1.89.89.4.1.6,RADLAN-MNGINF-MIB::rlMngInfListService,INTEGER,read-write,,current,dontCare(0):telnet(1):snmp(2):http(3):https(4):ssh(5),Service type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH.
.1.3.6.1.4.1.89.89.4.1.7,RADLAN-MNGINF-MIB::rlMngInfListAction,INTEGER,read-write,,current,permit(0):deny(1),Action type. Can be permit or deny.
.1.3.6.1.4.1.89.89.4.1.8,RADLAN-MNGINF-MIB::rlMngInfListRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.89.5,RADLAN-MNGINF-MIB::rlMngInfAuditingEnable,INTEGER,read-write,,current,true(1):false(2),Controls whether SysLog messages
.1.3.6.1.4.1.89.90,RADLAN-MIB::rlPhy,,,,,,
.1.3.6.1.4.1.89.90.1,RADLAN-PHY-MIB::rlPhyTest,,,,,,
.1.3.6.1.4.1.89.90.1.1,RADLAN-PHY-MIB::rlPhyTestSetTable,,not-accessible,,current,,
.1.3.6.1.4.1.89.90.1.1.1,RADLAN-PHY-MIB::rlPhyTestSetEntry,,not-accessible,ifIndex,current,,An entry containing objects for invoking tests on an interface.
.1.3.6.1.4.1.89.90.1.1.1.1,RADLAN-PHY-MIB::rlPhyTestSetType,INTEGER,read-write,,current,rlPhyTestTableNoTest(1):rlPhyTestTableCableStatus(2):rlPhyTestTableCableFault(3):rlPhyTestTableCableLength(4):rlPhyTestTableTransceiverTemp(5):rlPhyTestTableTransceiverSupply(6):rlPhyTestTableTxBias(7):rlPhyTestTableTxOutput(8):rlPhyTestTableRxOpticalPower(9):rlPhyTestTableDataReady(10):rlPhyTestTableLOS(11):rlPhyTestTableTxFault(12),A control variable used to start operator initiated interface tests.1 indicates that no test has been initiated. Only operator initiated interface tests can be set to this variable.
.1.3.6.1.4.1.89.90.1.2,RADLAN-PHY-MIB::rlPhyTestGetTable,,not-accessible,,current,,
.1.3.6.1.4.1.89.90.1.2.1,RADLAN-PHY-MIB::rlPhyTestGetEntry,,not-accessible,ifIndex:rlPhyTestGetType,current,,An entry containing results of tests on an interface.
.1.3.6.1.4.1.89.90.1.2.1.1,RADLAN-PHY-MIB::rlPhyTestGetType,INTEGER,read-only,,current,rlPhyTestTableNoTest(1):rlPhyTestTableCableStatus(2):rlPhyTestTableCableFault(3):rlPhyTestTableCableLength(4):rlPhyTestTableTransceiverTemp(5):rlPhyTestTableTransceiverSupply(6):rlPhyTestTableTxBias(7):rlPhyTestTableTxOutput(8):rlPhyTestTableRxOpticalPower(9):rlPhyTestTableDataReady(10):rlPhyTestTableLOS(11):rlPhyTestTableTxFault(12),A control variable used to, 1 to indicate that this test can be done on the specified port, 2 to initiate the test whenever the user wishes
.1.3.6.1.4.1.89.90.1.2.1.2,RADLAN-PHY-MIB::rlPhyTestGetStatus,INTEGER,read-only,,current,none(1):success(2):inProgress(3):notSupported(4):unAbleToRun(5):aborted(6):failed(7),This object contains the status of the most recently requested test for operator initiated tests or the value none(1) if no tests have been requested since the last reset. For non operator initiated tests the value is always none(1). Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
.1.3.6.1.4.1.89.90.1.2.1.3,RADLAN-PHY-MIB::rlPhyTestGetResult,INTEGER,read-only,,current,,This object holds the test result
.1.3.6.1.4.1.89.90.1.2.1.4,RADLAN-PHY-MIB::rlPhyTestGetUnits,INTEGER,read-only,,current,integer(1):boolean(2):downUP(3):reverseNormal(4):mdiMdix(5):meter(6):degree(7):microVolt(8):microOham(9):microAmper(10):microWatt(11):millisecond(12):alaskaPhyLength(13):alaskaPhyStatus(14):dbm(15):decidbm(16):milidbm(17),The test result unit of measure. The units can be standard unit or special units that are designed for special test. The alaskaPhyLength unit is design for the VCT diagnostic and its values are: less_than_50M(1), 50-80M(2), 80-110M(3), 110-140M(4), more_than_140M(5). The alaskaPhyStatus unit is design for the VCT diagnostic and its values are: 4_pair_cable(1), 2_pair_cable(2), no_cable(3), open_cable(4), short_cable(5), bad_cable(6), impedance_mismatch(7).
.1.3.6.1.4.1.89.90.1.2.1.5,RADLAN-PHY-MIB::rlPhyTestGetAlarm,INTEGER,read-only,,current,notRelevant(1):noAlarmSet(2):lowWarning(3):highWarning(4):lowAlarm(5):highAlarm(6),This object hold the Alarm for this Entry. only Test that have can have alarms use this field, other holds the Value notRelevant(1) 
.1.3.6.1.4.1.89.90.1.2.1.6,RADLAN-PHY-MIB::rlPhyTestGetTimeStamp,OCTET,read-only,,current,,The time in string (formated DD-MMM-YYYY HH:MM:SS e.g 14-Apr-2002 10:33:31)
.1.3.6.1.4.1.89.91,RADLAN-MIB::rlJumboFrames,,,,,,
.1.3.6.1.4.1.89.91.1,RADLAN-MIB::rlJumboFramesCurrentStatus,INTEGER,read-only,,mandatory,enable(1):disable(2),Show the current Jumbo Frames status
.1.3.6.1.4.1.89.91.2,RADLAN-MIB::rlJumboFramesStatusAfterReset,INTEGER,read-write,,mandatory,enable(1):disable(2),Set the Jumbo Frames status after reset
.1.3.6.1.4.1.89.92,RADLAN-MIB::rlTimeSynchronization,,,,,,
.1.3.6.1.4.1.89.92.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlTimeSyncMethodMode,,,,,,
.1.3.6.1.4.1.89.92.1.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlTimeSyncMibVersion,INTEGER,read-only,,current,,TimeSync Mib Version.
.1.3.6.1.4.1.89.92.1.2,RADLAN-TIMESYNCHRONIZATION-MIB::rndTimeSyncManagedTime,OCTET,read-write,,current,,The time will be sent in the format hhmmss
.1.3.6.1.4.1.89.92.1.3,RADLAN-TIMESYNCHRONIZATION-MIB::rndTimeSyncManagedDate,OCTET,read-write,,current,,The date will be sent in the format ddmmyy
.1.3.6.1.4.1.89.92.1.4,RADLAN-TIMESYNCHRONIZATION-MIB::rndTimeSyncManagedDateTime,OCTET,read-write,,current,,The date and time will be sent in the format ddmmyyhhmmss
.1.3.6.1.4.1.89.92.1.5,RADLAN-TIMESYNCHRONIZATION-MIB::rlTimeSyncMethod,INTEGER,read-write,,current,none(1):sntp(2):ntp(3),Method to be used for time synchronization in the device.
.1.3.6.1.4.1.89.92.1.6,RADLAN-TIMESYNCHRONIZATION-MIB::rlTimeZone,OCTET,read-write,,current,,Offset from Greenwich time (format [+/-]hh:mm).
.1.3.6.1.4.1.89.92.1.7,RADLAN-TIMESYNCHRONIZATION-MIB::rlTimeZoneCode,OCTET,read-write,,current,,Code definition for current TimeZone.
.1.3.6.1.4.1.89.92.1.8,RADLAN-TIMESYNCHRONIZATION-MIB::rlDaylightSavingTimeMode,INTEGER,read-write,,current,recurring(1):date(2):none(3),Daylight Saving Time - Recurring/Date/None.
.1.3.6.1.4.1.89.92.1.9,RADLAN-TIMESYNCHRONIZATION-MIB::rlDaylightSavingTimeStart,OCTET,read-write,,current,,Daylight Saving Time start date. In recurring mode: week wday month hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)
.1.3.6.1.4.1.89.92.1.10,RADLAN-TIMESYNCHRONIZATION-MIB::rlDaylightSavingTimeEnd,OCTET,read-write,,current,,Daylight Saving Time end date. In recurring mode: week wday month hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)
.1.3.6.1.4.1.89.92.1.11,RADLAN-TIMESYNCHRONIZATION-MIB::rlDaylightSavingTimeOffset,Integer32,read-write,,current,,Daylight Saving Time - The number of minutes to add to the clock during summer time.
.1.3.6.1.4.1.89.92.1.12,RADLAN-TIMESYNCHRONIZATION-MIB::rlDaylightSavingTimeCode,OCTET,read-write,,current,,Code definition for current Daylight Saving Time.
.1.3.6.1.4.1.89.92.1.13,RADLAN-TIMESYNCHRONIZATION-MIB::rlTZDSTOffset,INTEGER,read-only,,current,,Local Time Zone and Daylight Saving Time offset in seconds.
.1.3.6.1.4.1.89.92.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpClient,,,,,,
.1.3.6.1.4.1.89.92.2.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfig,,,,,,
.1.3.6.1.4.1.89.92.2.1.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpMibVersion,INTEGER,read-only,,current,,SntpNtp Mib Version.
.1.3.6.1.4.1.89.92.2.1.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigMode,INTEGER,read-only,,current,none(1):unicast(2):anycast(3):multicast(4):unicastAnycast(5):unicastMulticast(6):anycastMulticast(7):unicastAnycastMulticast(8),Current configuration operational mode of SNTP/NTP client.
.1.3.6.1.4.1.89.92.2.1.3,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigSysStratum,Integer32,read-only,,current,,The stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RFC-1305 is invoked.
.1.3.6.1.4.1.89.92.2.1.4,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigPollInterval,INTEGER,read-write,,current,,Period of time (in seconds) between succesive attempts to perform an update via SNTP.
.1.3.6.1.4.1.89.92.2.1.5,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigPrimaryPollSrvAddr,IpAddress,read-only,,current,,Ip Address of a trusted SNTP server for polling.
.1.3.6.1.4.1.89.92.2.1.6,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigPrimaryPollSrvMrid,INTEGER,read-only,,current,,The mrid of the primary server.
.1.3.6.1.4.1.89.92.2.1.7,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigPrimaryPollSrvIfIndex,INTEGER,read-only,,current,,The interface addressed of the primary server.
.1.3.6.1.4.1.89.92.2.1.8,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigPrimaryPollSrvStratum,Integer32,read-only,,current,,The stratum of the primary polling server.
.1.3.6.1.4.1.89.92.2.1.9,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigSyncSrvAddr,IpAddress,read-only,,current,,Ip Address of the synced server.
.1.3.6.1.4.1.89.92.2.1.10,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigSyncSrvMrid,INTEGER,read-only,,current,,The mrid of the synced server.
.1.3.6.1.4.1.89.92.2.1.11,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigSyncSrvIfIndex,INTEGER,read-only,,current,,The interface addressed of the synced server.
.1.3.6.1.4.1.89.92.2.1.12,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigSyncSrvType,INTEGER,read-only,,current,none(1):unicast(2):anycast(3):broadcast(4),Synced server type.
.1.3.6.1.4.1.89.92.2.1.13,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigSyncSrvStratum,Integer32,read-only,,current,,The stratum of the synced server.
.1.3.6.1.4.1.89.92.2.1.14,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigRetryTimeout,Integer32,read-only,,current,,SNTP/NTP requests Retry Interval.
.1.3.6.1.4.1.89.92.2.1.15,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpNtpConfigRetryCnt,Integer32,read-only,,current,,SNTP/NTP requests Retry Count.
.1.3.6.1.4.1.89.92.2.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpConfig,,,,,,
.1.3.6.1.4.1.89.92.2.2.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpClientMode,INTEGER,read-only,,current,none(1):active(2):passive(3),Current operational mode of SNTP client.
.1.3.6.1.4.1.89.92.2.2.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpUnicastAdminState,INTEGER,read-write,,current,enabled(1):disabled(2),SNTP Unicast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.
.1.3.6.1.4.1.89.92.2.2.3,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastAdminState,INTEGER,read-write,,current,enabled(1):disabled(2),SNTP Broadcast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.
.1.3.6.1.4.1.89.92.2.2.4,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastAdminState,INTEGER,read-write,,current,enabled(1):disabled(2),SNTP Anycast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.
.1.3.6.1.4.1.89.92.2.2.5,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpUnicastPollState,INTEGER,read-write,,current,true(1):false(2),SNTP Unicast poll state - TRUE for polled.
.1.3.6.1.4.1.89.92.2.2.6,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastPollState,INTEGER,read-write,,current,true(1):false(2),SNTP Broadcast poll state - TRUE for polled.
.1.3.6.1.4.1.89.92.2.2.7,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastPollState,INTEGER,read-write,,current,true(1):false(2),SNTP Anycast poll state - TRUE for polled.
.1.3.6.1.4.1.89.92.2.2.8,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAuthenticationState,INTEGER,read-write,,current,enabled(1):disabled(2),SNTP authentication state- Enable/Disable SNTP.
.1.3.6.1.4.1.89.92.2.2.9,RADLAN-TIMESYNCHRONIZATION-MIB::rlTimeValidFlag,INTEGER,read-write,,current,true(1):false(2),Is time valid.
.1.3.6.1.4.1.89.92.2.2.10,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpConfigBroadcastTable,,not-accessible,,current,,A table containing broadcast mode information per interface.
.1.3.6.1.4.1.89.92.2.2.10.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastEntry,,not-accessible,rlSntpBroadcastIfIndex,current,,Private paramters for interface: sntp status, broadcast mode.
.1.3.6.1.4.1.89.92.2.2.10.1.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastIfIndex,INTEGER,not-accessible,,current,,The interface addressed by this entry.
.1.3.6.1.4.1.89.92.2.2.10.1.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastIfAdminState,INTEGER,read-write,,current,enabled(1):disabled(2),SNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.
.1.3.6.1.4.1.89.92.2.2.10.1.3,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastMode,INTEGER,read-write,,current,none(1):receive(2):send(3):receiveSend(4),SNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (were not directed to the host). This is multicast mode in the RFC. Send - host only send SNTP packets and wait for replies directed to the host. This is anycast mode in the RFC. ReceiveSend - host receive broadcast messages (destination is broadcast address in the received messages) and send SNTP packets to wait for replies directed to the host (destination address of the reply is the host address). This mode combines anycast and multicast modes in the RFC.
.1.3.6.1.4.1.89.92.2.2.10.1.4,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastPolled,INTEGER,read-write,,current,true(1):false(2),TRUE if participating in polling cycle, else FALSE.
.1.3.6.1.4.1.89.92.2.2.10.1.5,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastAddress,IpAddress,read-only,,current,,Ip Address of a trusted SNTP server.
.1.3.6.1.4.1.89.92.2.2.10.1.6,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastStratum,Integer32,read-only,,current,,The stratum of this server.
.1.3.6.1.4.1.89.92.2.2.10.1.7,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastLastResp,OCTET,read-only,,current,,SNTP Broadcast Last Response Time
.1.3.6.1.4.1.89.92.2.2.10.1.8,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastStatus,INTEGER,read-only,,current,unknown(1):inProcess(2):up(3):down(4),The Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.
.1.3.6.1.4.1.89.92.2.2.10.1.9,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastOffset,OCTET,read-only,,current,,The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
.1.3.6.1.4.1.89.92.2.2.10.1.10,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastDelay,OCTET,read-only,,current,,The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
.1.3.6.1.4.1.89.92.2.2.10.1.11,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpBroadcastRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Status of this SNTP broadcast interface information.
.1.3.6.1.4.1.89.92.2.2.11,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpConfigAnycastTable,,not-accessible,,current,,A table containing anycast information per interface.
.1.3.6.1.4.1.89.92.2.2.11.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastEntry,,not-accessible,rlSntpAnycastIfIndex,current,,Private paramters for interface: server info.
.1.3.6.1.4.1.89.92.2.2.11.1.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastIfIndex,INTEGER,not-accessible,,current,,The interface addressed by this entry.
.1.3.6.1.4.1.89.92.2.2.11.1.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastAddress,IpAddress,read-only,,current,,Ip Address of a trusted SNTP server.
.1.3.6.1.4.1.89.92.2.2.11.1.3,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastStratum,Integer32,read-only,,current,,The stratum of this server.
.1.3.6.1.4.1.89.92.2.2.11.1.4,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastLastResp,OCTET,read-only,,current,,SNTP Anycast Last Response Time
.1.3.6.1.4.1.89.92.2.2.11.1.5,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastStatus,INTEGER,read-only,,current,unknown(1):inProcess(2):up(3):down(4),The Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.
.1.3.6.1.4.1.89.92.2.2.11.1.6,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastOffset,OCTET,read-only,,current,,The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
.1.3.6.1.4.1.89.92.2.2.11.1.7,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastDelay,OCTET,read-only,,current,,The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
.1.3.6.1.4.1.89.92.2.2.11.1.8,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAnycastRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Status of this SNTP anycast interface information.
.1.3.6.1.4.1.89.92.2.2.12,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpConfigServerTable,,not-accessible,,current,,A table containing trusted SNTP servers to be queried in unicast or broadcast mode.
.1.3.6.1.4.1.89.92.2.2.12.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServerEntry,,not-accessible,rlSntpServerAddress,current,,A trusted server.
.1.3.6.1.4.1.89.92.2.2.12.1.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServerAddress,IpAddress,not-accessible,,current,,Ip Address of a trusted SNTP server.
.1.3.6.1.4.1.89.92.2.2.12.1.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServerPolled,INTEGER,read-write,,current,true(1):false(2),TRUE if participating in polling cycle, else FALSE.
.1.3.6.1.4.1.89.92.2.2.12.1.3,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServerStratum,Integer32,read-only,,current,,The stratum of this server.
.1.3.6.1.4.1.89.92.2.2.12.1.4,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServerLastResp,OCTET,read-only,,current,,SNTP Server Last Response Time
.1.3.6.1.4.1.89.92.2.2.12.1.5,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServerStatus,INTEGER,read-only,,current,unknown(1):inProcess(2):up(3):down(4),The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.
.1.3.6.1.4.1.89.92.2.2.12.1.6,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServersOffset,OCTET,read-only,,current,,The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
.1.3.6.1.4.1.89.92.2.2.12.1.7,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServersDelay,OCTET,read-only,,current,,The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
.1.3.6.1.4.1.89.92.2.2.12.1.8,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServersKeyIdentifier,Unsigned32,read-write,,current,,Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done.
.1.3.6.1.4.1.89.92.2.2.12.1.9,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpServerRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Status of this SNTP server information.
.1.3.6.1.4.1.89.92.2.2.13,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpConfigAuthenticationTable,,not-accessible,,current,,A table authentication keys.
.1.3.6.1.4.1.89.92.2.2.13.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAuthenticationEntry,,not-accessible,rlSntpAuthenticationKeyID,current,,Keys information for authenticationof NTP packets.
.1.3.6.1.4.1.89.92.2.2.13.1.1,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAuthenticationKeyID,Unsigned32,read-write,,current,,The key identifier. Valid rabge for key identifier is 1-4294967295.
.1.3.6.1.4.1.89.92.2.2.13.1.2,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAuthenticationKeyValue,OCTET,read-write,,current,,Key value.
.1.3.6.1.4.1.89.92.2.2.13.1.3,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAuthenticationKeyState,INTEGER,read-write,,current,enabled(1):disabled(2),Authentication key state - Enable/Disable key.
.1.3.6.1.4.1.89.92.2.2.13.1.4,RADLAN-TIMESYNCHRONIZATION-MIB::rlSntpAuthenticationRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Status of this Authentication key information.
.1.3.6.1.4.1.89.92.2.3,RADLAN-TIMESYNCHRONIZATION-MIB::rlNtpConfig,,,,,,
.1.3.6.1.4.1.89.93,RADLAN-MIB::rlDnsCl,,,,,,
.1.3.6.1.4.1.89.93.1,RADLAN-DNSCL-MIB::rlDnsClMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.93.2,RADLAN-DNSCL-MIB::rlDnsClEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable or Disable the use of the DNS client feature.
.1.3.6.1.4.1.89.93.3,RADLAN-DNSCL-MIB::rlDnsClDomainNameTable,,not-accessible,,current,,The domain names table.
.1.3.6.1.4.1.89.93.3.1,RADLAN-DNSCL-MIB::rlDnsClDomainNameEntry,,not-accessible,rlDnsClDomainNameName,current,, The row definition for this table.
.1.3.6.1.4.1.89.93.3.1.1,RADLAN-DNSCL-MIB::rlDnsClDomainNameName,OCTET,read-write,,current,,The domain name for this ifIndex.
.1.3.6.1.4.1.89.93.3.1.2,RADLAN-DNSCL-MIB::rlDnsClDomainNameOwner,INTEGER,read-write,,current,static(1):dhcp(2),The Domain Name owner. Static if Domain Name defined by user, dhcp if received by boot protocol like DHCP.
.1.3.6.1.4.1.89.93.3.1.3,RADLAN-DNSCL-MIB::rlDnsClDomainNameRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.93.4,RADLAN-DNSCL-MIB::rlDnsClMaxNumOfRetransmissions,INTEGER,read-write,,current,,The maximum number of retransmissions for each query.
.1.3.6.1.4.1.89.93.5,RADLAN-DNSCL-MIB::rlDnsClMinRetransmissionInterval,INTEGER,read-write,,current,,The minimum number of seconds that must elapsed before retransmission for each query.
.1.3.6.1.4.1.89.93.6,RADLAN-DNSCL-MIB::rlDnsClNamesTable,,not-accessible,,current,,The Names table.
.1.3.6.1.4.1.89.93.6.1,RADLAN-DNSCL-MIB::rlDnsClNamesEntry,,not-accessible,rlDnsClNamesName:rlDnsClNamesOwner:rlDnsClNamesIndex,current,, The row definition for this table.
.1.3.6.1.4.1.89.93.6.1.1,RADLAN-DNSCL-MIB::rlDnsClNamesName,OCTET,read-only,,current,,The host name.
.1.3.6.1.4.1.89.93.6.1.2,RADLAN-DNSCL-MIB::rlDnsClNamesOwner,INTEGER,read-write,,current,static(1):dhcp(2),The Host Name Entry owner. Static if Host Name Entry defined by user, dhcp if received by boot protocol like DHCP.
.1.3.6.1.4.1.89.93.6.1.3,RADLAN-DNSCL-MIB::rlDnsClNamesIndex,Integer32,not-accessible,,current,,A value which makes entries in the table unique when the other index values (rlDnsClNamesName) do not provide a unique index.
.1.3.6.1.4.1.89.93.6.1.4,RADLAN-DNSCL-MIB::rlDnsClNamesAddr,IpAddress,read-write,,current,,The host IP address
.1.3.6.1.4.1.89.93.6.1.5,RADLAN-DNSCL-MIB::rlDnsClNamesRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.93.7,RADLAN-DNSCL-MIB::dnsResConfigSbeltExtTable,,not-accessible,,current,,Augmenting dnsResConfigSbeltTable (dns resolver safety belt table) for added info
.1.3.6.1.4.1.89.93.7.1,RADLAN-DNSCL-MIB::dnsResConfigSbeltExtEntry,,not-accessible,,current,,A row of the table dnsResConfigSbeltTable Extended by this definition.
.1.3.6.1.4.1.89.93.7.1.1,RADLAN-DNSCL-MIB::dnsResConfigSbeltOwner,INTEGER,read-write,,current,static(1):dhcp(2),The DNS server Entry owner. Static if DNS server Entry defined by user, dhcp if received by boot protocol like DHCP.
.1.3.6.1.4.1.89.94,RADLAN-MIB::rlCDB,,,,,,
.1.3.6.1.4.1.89.94.1,RADLAN-MIB::rlStartupCDBChanged,INTEGER,read-only,,mandatory,true(1):false(2),Indicates whether the startup CDB has changed between the router's last two reboots
.1.3.6.1.4.1.89.94.2,RADLAN-MIB::rlManualReboot,INTEGER,read-only,,mandatory,true(1):false(2),Indicates whether the device was shutdown orderly before reboot or not (i.e. power failure)
.1.3.6.1.4.1.89.95,RADLAN-MIB::rldot1x,,,,,,
.1.3.6.1.4.1.89.95.1,RADLAN-MIB::rldot1xMibVersion,INTEGER,read-only,,mandatory,,MIB's version, the current version is 1.
.1.3.6.1.4.1.89.95.2,RADLAN-MIB::rldot1xExtAuthSessionStatsTable,,not-accessible,,mandatory,,A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.3.6.1.4.1.89.95.2.1,RADLAN-MIB::rldot1xExtAuthSessionStatsEntry,,not-accessible,,mandatory,,The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
.1.3.6.1.4.1.89.95.2.1.1,RADLAN-MIB::rlDot1xAuthSessionAuthenticMethod,INTEGER,read-only,,mandatory,remoteAuthServer(1):localAuthServer(2):none(3),The authentication method used to establish the session.
.1.3.6.1.4.1.89.95.3,RADLAN-MIB::rldot1xGuestVlanSupported,INTEGER,read-only,,mandatory,true(1):false(2),indicate if guest vlan is supported.
.1.3.6.1.4.1.89.95.4,RADLAN-MIB::rldot1xGuestVlanVID,Unsigned32,read-write,,mandatory,,specify the guest vlan tag , 0 for non exiting.
.1.3.6.1.4.1.89.95.5,RADLAN-MIB::rldot1xGuestVlanPorts,OCTET,read-write,,mandatory,,the ports that can be members in the guest vlan
.1.3.6.1.4.1.89.95.6,RADLAN-MIB::rldot1xUnAuthenticatedVlanSupported,INTEGER,read-only,,mandatory,true(1):false(2),indicate if unauthenticated Vlan is supported.
.1.3.6.1.4.1.89.95.7,RADLAN-MIB::rldot1xUnAuthenticatedVlanTable,,not-accessible,,mandatory,,port belong to vlan in all port authenticated state except force unauthenticated table
.1.3.6.1.4.1.89.95.7.1,RADLAN-MIB::rldot1xUnAuthenticatedVlanEntry,,not-accessible,dot1qFdbId,mandatory,, port belong to vlan in all port authenticated state except force unauthenticated entry
.1.3.6.1.4.1.89.95.7.1.1,RADLAN-MIB::rldot1xUnAuthenticatedVlanStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.95.8,RADLAN-MIB::rldot1xUserBasedVlanSupported,INTEGER,read-only,,mandatory,true(1):false(2),indicate if user based Vlan is supported.
.1.3.6.1.4.1.89.95.9,RADLAN-MIB::rldot1xUserBasedVlanPorts,OCTET,read-write,,mandatory,,the ports that can be members in the user based vlan
.1.3.6.1.4.1.89.96,RADLAN-MIB::rlFile,,,,,,
.1.3.6.1.4.1.89.96.1,RADLAN-File::rlFileMibVersion,INTEGER,read-only,,current,,Indicates the File System MIB version. The current version is 1.
.1.3.6.1.4.1.89.96.2,RADLAN-File::rlFileTable,,not-accessible,,current,, The (conceptual) table listing all the files of the flash file system.
.1.3.6.1.4.1.89.96.2.1,RADLAN-File::rlFileEntry,,not-accessible,rlFileName,current,, An entry (conceptual row) in the FileTable.
.1.3.6.1.4.1.89.96.2.1.1,RADLAN-File::rlFileName,OCTET,read-write,,current,,The name of the file.
.1.3.6.1.4.1.89.96.2.1.2,RADLAN-File::rlFilePermission,INTEGER,read-only,,current,read(1):write(2):readWrite(3):noReadNoWrite(4),Specifies the permission level in which this file can be accessed. 
.1.3.6.1.4.1.89.96.2.1.3,RADLAN-File::rlFileSize,INTEGER,read-only,,current,,The size of the file in bytes (actual size).
.1.3.6.1.4.1.89.96.2.1.4,RADLAN-File::rlFileModificationDate,OCTET,read-only,,current,,The time-stamp indicating the date of creation or last modification of this file. The format of the time-stamp is dd-mmm-yyyy
.1.3.6.1.4.1.89.96.2.1.5,RADLAN-File::rlFileModificationTime,OCTET,read-only,,current,,The time-stamp indicating the time of creation or last modification of this file. The format of the time-stamp is hh:mm:ss
.1.3.6.1.4.1.89.96.2.1.6,RADLAN-File::rlFileRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used just to delete an entry
.1.3.6.1.4.1.89.96.3,RADLAN-File::rlFileActionTable,,not-accessible,,current,, The (conceptual) table listing only one entry at a time with parameters needed for performing an action on a file.
.1.3.6.1.4.1.89.96.3.1,RADLAN-File::rlFileActionEntry,,not-accessible,rlFileActionName,current,, An entry (conceptual row) in the FileActionTable.
.1.3.6.1.4.1.89.96.3.1.1,RADLAN-File::rlFileActionName,OCTET,read-write,,current,,The name of the file.
.1.3.6.1.4.1.89.96.3.1.2,RADLAN-File::rlFileActionNewName,OCTET,read-write,,current,,The new name for the file (in case of action rename).
.1.3.6.1.4.1.89.96.3.1.3,RADLAN-File::rlFileActionRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),It is used to create an entry
.1.3.6.1.4.1.89.96.3.1.4,RADLAN-File::rlFileActionCommand,INTEGER,read-write,,current,rename(1),Perform an action on the file.
.1.3.6.1.4.1.89.96.4,RADLAN-File::rlFileTotalSizeOfFlash,INTEGER,read-only,,current,,Indicates the total size of the flash in bytes.
.1.3.6.1.4.1.89.96.5,RADLAN-File::rlFileFreeSizeOfFlash,INTEGER,read-only,,current,,Indicates the number of free bytes in the flash.
.1.3.6.1.4.1.89.96.6,RADLAN-File::rlFileAuditingEnable,INTEGER,read-write,,current,true(1):false(2),Controls whether SysLog messages should be issued on file rename/delete events
.1.3.6.1.4.1.89.97,RADLAN-MIB::rlAAAEap,,,,,,
.1.3.6.1.4.1.89.97.1,RADLAN-AAA::rlAAAEapMethodListTable,,not-accessible,,current,,The table specifies all methods list per method name.
.1.3.6.1.4.1.89.97.1.1,RADLAN-AAA::rlAAAEapMethodListEntry,,not-accessible,rlAAAEapMethodListName,current,,The row definition for this table.
.1.3.6.1.4.1.89.97.1.1.1,RADLAN-AAA::rlAAAEapMethodListName,OCTET,read-write,,current,,Line Method List Name
.1.3.6.1.4.1.89.97.1.1.2,RADLAN-AAA::rlAAAEapMethodType1,INTEGER,read-write,,current,rlAAAEapMethodDeny(0):rlAAAEapMethodRadius(1):rlAAAEapMethodSucceed(2), first method type that will be used in the method linked list.
.1.3.6.1.4.1.89.97.1.1.3,RADLAN-AAA::rlAAAEapMethodType2,INTEGER,read-write,,current,rlAAAEapMethodDeny(0):rlAAAEapMethodRadius(1):rlAAAEapMethodSucceed(2), second method type that will be used in the method linked list.
.1.3.6.1.4.1.89.97.1.1.4,RADLAN-AAA::rlAAAEapMethodType3,INTEGER,read-write,,current,rlAAAEapMethodDeny(0):rlAAAEapMethodRadius(1):rlAAAEapMethodSucceed(2),3th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.97.1.1.5,RADLAN-AAA::rlAAAEapMethodType4,INTEGER,read-write,,current,rlAAAEapMethodDeny(0):rlAAAEapMethodRadius(1):rlAAAEapMethodSucceed(2), 4th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.97.1.1.6,RADLAN-AAA::rlAAAEapMethodType5,INTEGER,read-write,,current,rlAAAEapMethodDeny(0):rlAAAEapMethodRadius(1):rlAAAEapMethodSucceed(2),5th method type that will be used in the method linked list.
.1.3.6.1.4.1.89.97.1.1.7,RADLAN-AAA::rlAAAEapMethodListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),method list status can be destroy or createAndGo
.1.3.6.1.4.1.89.97.2,RADLAN-AAA::rlAAAEapCurrentMethodList,OCTET,read-write,,current,,Specifies the method list that will be used for authentication.
.1.3.6.1.4.1.89.98,RADLAN-MIB::rlSNMP,,,,,,
.1.3.6.1.4.1.89.98.1,RADLAN-SNMP-MIB::rlSNMPv3,,,,,,
.1.3.6.1.4.1.89.98.1.1,RADLAN-SNMP-MIB::rlTargetParamsTestingLevel,INTEGER,read-write,,mandatory,low(1):high(2),The level of the tests done when configuring an entry in the snmpTargetParamsTable.
.1.3.6.1.4.1.89.98.1.2,RADLAN-SNMP-MIB::rlNotifyFilterTestingLevel,INTEGER,read-write,,mandatory,low(1):high(2),The level of the tests done when configuring an entry in the snmpNotifyFilterTable.
.1.3.6.1.4.1.89.98.1.3,RADLAN-SNMP-MIB::rlSnmpEngineID,OCTET,read-write,,mandatory,,A variable for setting the router's local engineID value. Setting this variable will effect the value of snmpEngineID. Setting this variable to the value '00 00 00 00 00'H will cause snmpEngineID to get an automatically created value based on the device basic MAC address. This method of setting the agent's engineID is recommended for stand-alone systems. Setting this variable to any other (valid) value will set snmpEngineID to this value. Setting this variable to all 'ff'H or all zeros is not allowed, with the exception of the value '00 00 00 00 00'H. The last method is recommended for stackable system, in order for the engineID to be unique within an administrative domain. Setting this value (to a value different then the default value) is required before configuring the usmUserTable. Changing the value of this variable has 2 side-effects: - All usmUserTable configured entries will be deleted. - All snmpCommunityTable entries with snmpCommunityContextEngineID value equal to old rlSnmpEngineID value, will be updated with the new rlSnmpEngineID value.
.1.3.6.1.4.1.89.98.2,RADLAN-SNMP-MIB::rlSNMPDomains,,,,,,
.1.3.6.1.4.1.89.98.2.1,RADLAN-SNMP-MIB::rlSnmpUDPMridDomain,,,,,,The SNMPv2 over UDP transport domain, used when Multi-Instance Router is supported (more than one MIR instance exist). The corresponding transport address is of type RlSnmpUDPMridAddress.
.1.3.6.1.4.1.89.98.3,RADLAN-SNMP-MIB::rlSnmpRequestMridTable,,not-accessible,,mandatory,,A table for determining the Mrid for the current SNMP request.
.1.3.6.1.4.1.89.98.3.1,RADLAN-SNMP-MIB::rlSnmpRequestMridEntry,,not-accessible,rlSnmpRequestManagedMrid,mandatory,, The row definition for this table.
.1.3.6.1.4.1.89.98.3.1.1,RADLAN-SNMP-MIB::rlSnmpRequestManagedMrid,INTEGER,read-only,,mandatory,,The router instance the NMS wants to manage in the current SNMP request. The value of this object, when attaching a variable instance of the rlSnmpRequestManagedMridTable to an SNMP request, will determine the managed Mrid for this request. It is important to mention that the variable insance must be attached as the first variable in the PDU in order to influence all variables.
.1.3.6.1.4.1.89.98.3.1.2,RADLAN-SNMP-MIB::rlSnmpRequestMridStatus,INTEGER,read-write,,mandatory,enable(1),The status of this entry.
.1.3.6.1.4.1.89.99,RADLAN-QOS-SERV::rlQosServ,,,,,,The MIB module describes the private MIB for QOS service mode.
.1.3.6.1.4.1.89.99.1,RADLAN-QOS-SERV::rlQosServTemplateTable,,not-accessible,,current,,This table specifies classification template information. Currently this table will contain exactly one entry.
.1.3.6.1.4.1.89.99.1.1,RADLAN-QOS-SERV::rlQosServTemplateEntry,,not-accessible,rlQosServTemplateIndex,current,,The entry of this table describes all classifier fields. The index is sequential integer represent by rlQosServTemplateEntry.
.1.3.6.1.4.1.89.99.1.1.1,RADLAN-QOS-SERV::rlQosServTemplateIndex,INTEGER,not-accessible,,current,,An arbitrary index for the template table.
.1.3.6.1.4.1.89.99.1.1.2,RADLAN-QOS-SERV::rlQosServTemplateDestMac,INTEGER,read-write,,current,true(1):false(2),Include the destination Mac field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.3,RADLAN-QOS-SERV::rlQosServTemplateDestMacMask,OCTET,read-write,,current,,Destination Mac address mask. It may specify any byte (not bit), within the Mac address, for classification, designated by 0.
.1.3.6.1.4.1.89.99.1.1.4,RADLAN-QOS-SERV::rlQosServTemplateSrcMac,INTEGER,read-write,,current,true(1):false(2),Include the source Mac field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.5,RADLAN-QOS-SERV::rlQosServTemplateSrcMacMask,OCTET,read-write,,current,,Source Mac address mask. It may specify any byte (not bit), within the Mac address, for classification, designated by 0.
.1.3.6.1.4.1.89.99.1.1.6,RADLAN-QOS-SERV::rlQosServTemplateVlan,INTEGER,read-write,,current,true(1):false(2),Include the Vlan field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.7,RADLAN-QOS-SERV::rlQosServTemplateDestIp,INTEGER,read-write,,current,true(1):false(2),Include the destination Ip field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.8,RADLAN-QOS-SERV::rlQosServTemplateDestIpMask,IpAddress,read-write,,current,,Destination Ip address mask. It may specify any byte (not bit), within the Ip address, for classification, designated by 0.
.1.3.6.1.4.1.89.99.1.1.9,RADLAN-QOS-SERV::rlQosServTemplateSrcIp,INTEGER,read-write,,current,true(1):false(2),Include the source Ip field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.10,RADLAN-QOS-SERV::rlQosServTemplateSrcIpMask,IpAddress,read-write,,current,,Source Ip address mask. It may specify any byte (not bit), within the Ip address, for classification, designated by 0.
.1.3.6.1.4.1.89.99.1.1.11,RADLAN-QOS-SERV::rlQosServTemplateIpProtocol,INTEGER,read-write,,current,true(1):false(2),Include the Ip protocol field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.12,RADLAN-QOS-SERV::rlQosServTemplateTcpSrcPort,INTEGER,read-write,,current,true(1):false(2),Include the Tcp source port field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.13,RADLAN-QOS-SERV::rlQosServTemplateTcpDestPort,INTEGER,read-write,,current,true(1):false(2),Include the Tcp destination port field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.14,RADLAN-QOS-SERV::rlQosServTemplateUdpSrcPort,INTEGER,read-write,,current,true(1):false(2),Include the Udp source port field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.15,RADLAN-QOS-SERV::rlQosServTemplateUdpDestPort,INTEGER,read-write,,current,true(1):false(2),Include the Udp destination port field as a template classifier.
.1.3.6.1.4.1.89.99.1.1.16,RADLAN-QOS-SERV::rlQosServTemplateTos,INTEGER,read-write,,current,true(1):false(2),Include the Tos field as a template classifier.
.1.3.6.1.4.1.89.99.2,RADLAN-QOS-SERV::rlQosServFclTable,,not-accessible,,current,,This table specifies FCL table information
.1.3.6.1.4.1.89.99.2.1,RADLAN-QOS-SERV::rlQosServFclEntry,,not-accessible,rlQosServFclIndex:rlQosServFclFcePriority,current,,Each entry in this table describes one Flow Classification List with It's Flow Classification Element. The information includes the FCL index and reference to a FCE index. The indices are the Fcl index represent by rlQosServFclIndex and the Fce index represent by rlQosServFclFceIndex.
.1.3.6.1.4.1.89.99.2.1.1,RADLAN-QOS-SERV::rlQosServFclIndex,INTEGER,not-accessible,,current,,An arbitrary index for the FCL table. Value '0' is invalid.
.1.3.6.1.4.1.89.99.2.1.2,RADLAN-QOS-SERV::rlQosServFclFcePriority,INTEGER,not-accessible,,current,,Priority of the FCE within the FCL.
.1.3.6.1.4.1.89.99.2.1.3,RADLAN-QOS-SERV::rlQosServFclFceIndex,INTEGER,read-create,,current,,A reference to the FCE index.
.1.3.6.1.4.1.89.99.2.1.4,RADLAN-QOS-SERV::rlQosServFclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.99.3,RADLAN-QOS-SERV::rlQosServFceTable,,not-accessible,,current,,This table specifies FCE table information
.1.3.6.1.4.1.89.99.3.1,RADLAN-QOS-SERV::rlQosServFceEntry,,not-accessible,rlQosServFceIndex,current,,Each entry in this table describes one Flow Classifier Element. The information includes ACE index and a combination of all the other classifications, as depicted in the selection field. Classifiers are Mac and Ip source and destination addresses, Vlan, Ip protocol, TCP & UDP source and destination ports, Dscp and Ip precedence values. The index is a sequential integer represent by rlQosServFceIndex.
.1.3.6.1.4.1.89.99.3.1.1,RADLAN-QOS-SERV::rlQosServFceIndex,INTEGER,not-accessible,,current,,An arbitrary incremental Index for the Fce table.
.1.3.6.1.4.1.89.99.3.1.2,RADLAN-QOS-SERV::rlQosServFceErrorCode,INTEGER,read-only,,current,noError(1):noTemplate(2),Fce error code.
.1.3.6.1.4.1.89.99.3.1.3,RADLAN-QOS-SERV::rlQosServFceSelection,BITS,read-create,,current,macDestAddr(0):macSrcAddr(1):vlan(2):ipDestAddr(3):ipSrcAddr(4):ipProtocol(5):tcpDestPort(6):tcpSrcPort(7):udpDestPort(8):udpSrcPort(9):dscp(10):ipPrecedence(11),Flow Classification Elements selection.
.1.3.6.1.4.1.89.99.3.1.4,RADLAN-QOS-SERV::rlQosServFceDestMac,OCTET,read-create,,current,,Indicate the destination Mac address to compare with.
.1.3.6.1.4.1.89.99.3.1.5,RADLAN-QOS-SERV::rlQosServFceDestMacMask,OCTET,read-create,,current,,Indicates the destination Mac address mask to compare with. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.6,RADLAN-QOS-SERV::rlQosServFceSrcMac,OCTET,read-create,,current,,Indicate the source Mac address to compare with.
.1.3.6.1.4.1.89.99.3.1.7,RADLAN-QOS-SERV::rlQosServFceSrcMacMask,OCTET,read-create,,current,,Indicate the source Mac address mask to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.8,RADLAN-QOS-SERV::rlQosServFceVlan,INTEGER,read-create,,current,,Indicate the Vlan to compare with.
.1.3.6.1.4.1.89.99.3.1.9,RADLAN-QOS-SERV::rlQosServFceVlanMask,INTEGER,read-create,,current,,Indicate 12-bits Vlan bits to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.10,RADLAN-QOS-SERV::rlQosServFceDestIp,IpAddress,read-create,,current,,Indicate the destination Ip address to compare with.
.1.3.6.1.4.1.89.99.3.1.11,RADLAN-QOS-SERV::rlQosServFceDestIpMask,IpAddress,read-create,,current,,Indicate the destination Ip address mask to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.12,RADLAN-QOS-SERV::rlQosServFceSrcIp,IpAddress,read-create,,current,,Indicate the source Ip address to compare with.
.1.3.6.1.4.1.89.99.3.1.13,RADLAN-QOS-SERV::rlQosServFceSrcIpMask,IpAddress,read-create,,current,,Indicate the source Ip address mask to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.14,RADLAN-QOS-SERV::rlQosServFceIpProtocol,INTEGER,read-create,,current,,Indicate the Ip protocol to compare with.
.1.3.6.1.4.1.89.99.3.1.15,RADLAN-QOS-SERV::rlQosServFceTcpDestPort,INTEGER,read-create,,current,,Indicate the TCP destination port to compare with.
.1.3.6.1.4.1.89.99.3.1.16,RADLAN-QOS-SERV::rlQosServFceTcpDestPortMask,INTEGER,read-create,,current,,Indicate 16-bits TCP destination port bits to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.17,RADLAN-QOS-SERV::rlQosServFceTcpSrcPort,INTEGER,read-create,,current,,Indicate the TCP source port to compare with.
.1.3.6.1.4.1.89.99.3.1.18,RADLAN-QOS-SERV::rlQosServFceTcpSrcPortMask,INTEGER,read-create,,current,,Indicate 16-bits TCP source port bits to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.19,RADLAN-QOS-SERV::rlQosServFceUdpDestPort,INTEGER,read-create,,current,,Indicate the UDP destination port to compare with.
.1.3.6.1.4.1.89.99.3.1.20,RADLAN-QOS-SERV::rlQosServFceUdpDestPortMask,INTEGER,read-create,,current,,Indicate 16-bits UDP destination port bits to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.21,RADLAN-QOS-SERV::rlQosServFceUdpSrcPort,INTEGER,read-create,,current,,Indicate the UDP source port to compare with.
.1.3.6.1.4.1.89.99.3.1.22,RADLAN-QOS-SERV::rlQosServFceUdpSrcPortMask,INTEGER,read-create,,current,,Indicate 16-bits UDP source port bits to compare. It may specify any byte (not bit), designated by 0.
.1.3.6.1.4.1.89.99.3.1.23,RADLAN-QOS-SERV::rlQosServFceDscp,INTEGER,read-create,,current,,Indicate the Destination Mac address to compare with.
.1.3.6.1.4.1.89.99.3.1.24,RADLAN-QOS-SERV::rlQosServFceIpPrecedence,INTEGER,read-create,,current,,Indicate the Ip precedence to compare with.
.1.3.6.1.4.1.89.99.3.1.25,RADLAN-QOS-SERV::rlQosServFceStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.99.4,RADLAN-QOS-SERV::rlQosServProfileTable,,not-accessible,,current,,This table specifies (service) profile table information
.1.3.6.1.4.1.89.99.4.1,RADLAN-QOS-SERV::rlQosServProfileEntry,,not-accessible,rlQosServProfileIndex,current,,Each entry in this table describes one service profile element. The information includes: Profile name, type and various numeric parameters associated with the profile's service types. The index is sequential integer represent by rlQosServProfileIndex.
.1.3.6.1.4.1.89.99.4.1.1,RADLAN-QOS-SERV::rlQosServProfileIndex,INTEGER,not-accessible,,current,,An arbitrary index for the profile table.
.1.3.6.1.4.1.89.99.4.1.2,RADLAN-QOS-SERV::rlQosServProfileType,INTEGER,read-create,,current,regular(1):aggregate(2),Profile's type
.1.3.6.1.4.1.89.99.4.1.3,RADLAN-QOS-SERV::rlQosServProfileServiceType,INTEGER,read-create,,current,bestEffort(1):minDelay(2):committedDelay(3):minMaxBandwidth(4):rateLimit(5):trustCos(6):trustDscp(7):drop(8):dropAndDisablePort(9),Profile's service type.
.1.3.6.1.4.1.89.99.4.1.4,RADLAN-QOS-SERV::rlQosServProfileIngressBurstSize,Unsigned32,read-create,,current,,Profile's Ingress Burst Size, used only by the 'rate limit' service.
.1.3.6.1.4.1.89.99.4.1.5,RADLAN-QOS-SERV::rlQosServProfileMaxBandwidth,Unsigned32,read-create,,current,,Profile's Max Bandwidth, used by the 'min delay', 'committed delay' and 'min max bandwidth' services. Value 0 is used only as default value, and is invalid otherwise.
.1.3.6.1.4.1.89.99.4.1.6,RADLAN-QOS-SERV::rlQosServProfileMinBandwidth,Unsigned32,read-create,,current,,Profile's Min Bandwidth, used only by the 'min max bandwidth' service. Value 0 is used only as default value, and is invalid otherwise.
.1.3.6.1.4.1.89.99.4.1.7,RADLAN-QOS-SERV::rlQosServProfileMaxDelay,Unsigned32,read-create,,current,,Profile's Max Delay, used only by the 'committed delay' service. Value 0 is used only as default value, and is invalid otherwise.
.1.3.6.1.4.1.89.99.4.1.8,RADLAN-QOS-SERV::rlQosServProfileStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.99.5,RADLAN-QOS-SERV::rlQosServServiceTable,,not-accessible,,current,,This table specifies service table information.
.1.3.6.1.4.1.89.99.5.1,RADLAN-QOS-SERV::rlQosServServiceEntry,,not-accessible,rlQosServServiceIndex,current,,Each entry in this table describes one service profile element. The information includes: service's index, priority, pointers to associated profile and Fcl, operational and administrative statuses, ingress and egress interface lists, and two operational parameter values associated with a service type, as defined in the profile table. The index is sequential integer represent by rlQosServServiceIndex.
.1.3.6.1.4.1.89.99.5.1.1,RADLAN-QOS-SERV::rlQosServServiceIndex,INTEGER,not-accessible,,current,,An arbitrary index for the service table.
.1.3.6.1.4.1.89.99.5.1.2,RADLAN-QOS-SERV::rlQosServServicePriority,Unsigned32,read-create,,current,,Service's priority.
.1.3.6.1.4.1.89.99.5.1.3,RADLAN-QOS-SERV::rlQosServServiceProfilePointer,INTEGER,read-create,,current,,Pointer to attached profile entry.
.1.3.6.1.4.1.89.99.5.1.4,RADLAN-QOS-SERV::rlQosServServiceFclPointer,INTEGER,read-create,,current,,Pointer to attached FCL entry.
.1.3.6.1.4.1.89.99.5.1.5,RADLAN-QOS-SERV::rlQosServServiceInIfList,OCTET,read-create,,current,,Ingress interface list associated with this service entry.
.1.3.6.1.4.1.89.99.5.1.6,RADLAN-QOS-SERV::rlQosServServiceOutIfList,OCTET,read-create,,current,,Egress interface list associated with this service entry.
.1.3.6.1.4.1.89.99.5.1.7,RADLAN-QOS-SERV::rlQosServServiceScaledOutIfList,OCTET,read-only,,current,,Egress scaled interface list associated with this service entry.
.1.3.6.1.4.1.89.99.5.1.8,RADLAN-QOS-SERV::rlQosServServiceProfileParamOper,Unsigned32,read-only,,current,,If the service type specified in a profile associated with this entry has a parameter, this object instance specifies the parameter's operative value. This value will be different from the value defined in the associated profile only in case of scaling out, otherwise value 0 is used.
.1.3.6.1.4.1.89.99.5.1.9,RADLAN-QOS-SERV::rlQosServServiceStatusOper,INTEGER,read-only,,current,active(1):suspended(2),Operational value of the service status.
.1.3.6.1.4.1.89.99.5.1.10,RADLAN-QOS-SERV::rlQosServServiceStatusAdmin,INTEGER,read-create,,current,active(1):suspended(2),Administrative value of the service status.
.1.3.6.1.4.1.89.99.5.1.11,RADLAN-QOS-SERV::rlQosServServiceStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.99.6,RADLAN-QOS-SERV::rlQosServServicePriorityTable,,not-accessible,,current,,This table specifies service priority table information.
.1.3.6.1.4.1.89.99.6.1,RADLAN-QOS-SERV::rlQosServServicePriorityEntry,,not-accessible,rlQosServServicePriorityIndex,current,,Each entry in this table maps a priority to a service. The information includes: service's priority and the service index in the service table. The index is sequential integer represent by rlQosServServicePriorityIndex.
.1.3.6.1.4.1.89.99.6.1.1,RADLAN-QOS-SERV::rlQosServServicePriorityIndex,INTEGER,not-accessible,,current,,The service priority.
.1.3.6.1.4.1.89.99.6.1.2,RADLAN-QOS-SERV::rlQosServServicePriorityPointer,INTEGER,read-only,,current,,The index of the service associated with this priority in the service table.
.1.3.6.1.4.1.89.99.7,RADLAN-QOS-SERV::rlQosServServiceDefaultMappingTable,,not-accessible,,current,,This table specifies service priority table information.
.1.3.6.1.4.1.89.99.7.1,RADLAN-QOS-SERV::rlQosServServiceDefaultMappingEntry,,not-accessible,rlQosServServiceDefaultMappingType,current,,Each entry in this table describes one service priority entry. The information includes: service's priority, a pointer to its corresponding index in the service table. The index is sequential integer represent by rlQosServServicePriorityIndex.
.1.3.6.1.4.1.89.99.7.1.1,RADLAN-QOS-SERV::rlQosServServiceDefaultMappingType,INTEGER,not-accessible,,current,bestEffort(1):minDelay(2):committedDelay(3):minMaxBandwidth(4):rateLimit(5):trustDscp(6),Service type for the default mapping. 'Trust DSCP' service type is absent since no default mapping is possible for it.
.1.3.6.1.4.1.89.99.7.1.2,RADLAN-QOS-SERV::rlQosServServiceDefaultMappingDscp,INTEGER,read-write,,current,,DSCP default mapping value. A value of 64 means no DSCP default mapping is done.
.1.3.6.1.4.1.89.99.7.1.3,RADLAN-QOS-SERV::rlQosServServiceDefaultMappingVpt,INTEGER,read-write,,current,,Vpt default mapping value. A value of 9 means no VPT default mapping is done.
.1.3.6.1.4.1.89.99.8,RADLAN-QOS-SERV::rlQosServScalingErrorTable,,not-accessible,,current,,This table specifies scaling error table
.1.3.6.1.4.1.89.99.8.1,RADLAN-QOS-SERV::rlQosServScalingErrorEntry,,not-accessible,rlQosServScalingErrorIfIndex,current,,Each entry in this table specifies for each interface its scaling error, if such indeed exists.
.1.3.6.1.4.1.89.99.8.1.1,RADLAN-QOS-SERV::rlQosServScalingErrorIfIndex,Integer32,not-accessible,,current,,The interface index.
.1.3.6.1.4.1.89.99.8.1.2,RADLAN-QOS-SERV::rlQosServScalingErrorReason,INTEGER,read-only,,current,changeSpeed-10000to1000(1):changeSpeed-10000to100(2):changeSpeed-10000to10(3):changeSpeed-1000to100(4):changeSpeed-1000to10(5):changeSpeed-100to10(6):changeSpeed-10to100(7):changeSpeed-10to1000(8):changeSpeed-10to10000(9):changeSpeed-100to1000(10):changeSpeed-100to10000(11):changeSpeed-1000to10000(12),Scaling error reason.
.1.3.6.1.4.1.89.99.9,RADLAN-QOS-SERV::rlQosServFreeSequentialTable,,not-accessible,,current,,The table is used to get free indices of tables to create new entries, and next free priorities. The algorithm for free indexes depends on table types: Fcl table - first free index. Fce table - first free index. Service table - first free index. Service priority - last used priority + priority-delta. The priority-delta is used to supply QoS MIB user easy new priority insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and Increment' approach is used in all cases.
.1.3.6.1.4.1.89.99.9.1,RADLAN-QOS-SERV::rlQosServFreeSequentialEntry,,not-accessible,rlQosServFreeSequentialId,current,,The entry is used to get free index for particular table.
.1.3.6.1.4.1.89.99.9.1.1,RADLAN-QOS-SERV::rlQosServFreeSequentialId,INTEGER,not-accessible,,current,fcl(1):fce(2):profile(3):service(4):priorityService(5),Identification of the sequential, for which free indices or priority are retrieved.
.1.3.6.1.4.1.89.99.9.1.2,RADLAN-QOS-SERV::rlQosServFreeSequentialValue,INTEGER,read-only,,current,,The free index for the table or service priority. Returned '0' means no free entries/priority.
.1.3.6.1.4.1.89.99.10,RADLAN-QOS-SERV::rlQosServNameToIndexTable,,not-accessible,,current,,The table is used to get specific table(s) indices from the name.
.1.3.6.1.4.1.89.99.10.1,RADLAN-QOS-SERV::rlQosServNameToIndexEntry,,not-accessible,rlQosServNameToIndexTableId:rlQosServNameToIndexName,current,,The entry is used to get index form particular name and table type.
.1.3.6.1.4.1.89.99.10.1.1,RADLAN-QOS-SERV::rlQosServNameToIndexTableId,INTEGER,not-accessible,,current,fcl(1):fce(2):profile(3),Identification of the table, for which the index is retrieved.
.1.3.6.1.4.1.89.99.10.1.2,RADLAN-QOS-SERV::rlQosServNameToIndexName,OCTET,not-accessible,,current,,Name of the table's entry
.1.3.6.1.4.1.89.99.10.1.3,RADLAN-QOS-SERV::rlQosServNameToIndexValue,INTEGER,read-create,,current,,The index of the table. Value '0' is invalid.
.1.3.6.1.4.1.89.99.10.1.4,RADLAN-QOS-SERV::rlQosServNameToIndexStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a table entry. It is used to delete/Add an entry from this table.
.1.3.6.1.4.1.89.99.11,RADLAN-QOS-SERV::rlQosServIndexToNameTable,,not-accessible,,current,,The table is used to get specific table(s) name from indices. It is a read-write table for internal (CDB) purpose only and is not to set by outside users.
.1.3.6.1.4.1.89.99.11.1,RADLAN-QOS-SERV::rlQosServIndexToNameEntry,,not-accessible,rlQosServIndexToNameTableId:rlQosServIndexToNameIndex,current,,The entry is used to get name form particular index and table type.
.1.3.6.1.4.1.89.99.11.1.1,RADLAN-QOS-SERV::rlQosServIndexToNameTableId,INTEGER,not-accessible,,current,fcl(1):fce(2):profile(3),Identification of the table, for which the name is retrieved.
.1.3.6.1.4.1.89.99.11.1.2,RADLAN-QOS-SERV::rlQosServIndexToNameIndex,INTEGER,not-accessible,,current,,The index of the table. Value '0' is invalid.
.1.3.6.1.4.1.89.99.11.1.3,RADLAN-QOS-SERV::rlQosServIndexToNameValue,OCTET,read-write,,current,,Name of the table's entry
.1.3.6.1.4.1.89.99.12,RADLAN-QOS-SERV::rlQosServMibVersion,INTEGER,read-only,,current,,MIB's version, the current version is 1. 1 - original version. 2- 
.1.3.6.1.4.1.89.99.13,RADLAN-QOS-SERV::rlQosServMibAction,INTEGER,read-write,,current,none(1):importPolicy(2):noImportPolicy(3):flatServicePriorities(4),Actions to be performed by QoS service mode MIB.
.1.3.6.1.4.1.89.100,RADLAN-MIB::rlSsl,,,,,,
.1.3.6.1.4.1.89.100.1,RADLAN-SSL::rlSslCertificateGenerationTable,,not-accessible,,current,,This table is used for : 1. generating keys and self signed certificate - saved in flash and RAM (not in configuration file) 2. generating certificate requests - saved in RAM, can be read by rlSslCertificateExportTable 3. generating self signed certificate - saved in flash and RAM (not in configuraion file) By setting rlSslCertificateGenerationAction to the appropriate value this action takes place. The other fields of this table are used for each of this actions
.1.3.6.1.4.1.89.100.1.1,RADLAN-SSL::rlSslCertificateGenerationEntry,,not-accessible,rlSslCertificateGenerationIndex,current,, The row definition for this table.
.1.3.6.1.4.1.89.100.1.1.1,RADLAN-SSL::rlSslCertificateGenerationIndex,INTEGER,read-write,,current,,This index is always set to 1 no matter for which certificate or certificate request the action refers to.
.1.3.6.1.4.1.89.100.1.1.2,RADLAN-SSL::rlSslCertificateGenerationId,INTEGER,read-write,,current,,The device can hold a number of keys/certificates/certificate requests. These certificates are always numbered from 1 to N (maximum number of certificates in device). This field decides to which keys/certificates/certificate requests the action refers.
.1.3.6.1.4.1.89.100.1.1.3,RADLAN-SSL::rlSslCertificateGenerationCountryName,OCTET,read-write,,current,,Value of country name field that will appear when a new certificate request or self signed certificate is generated.
.1.3.6.1.4.1.89.100.1.1.4,RADLAN-SSL::rlSslCertificateGenerationStateOrProvinceName,OCTET,read-write,,current,,Value of state or province name field that will appear when a new certificate or self signed certificate is generated.
.1.3.6.1.4.1.89.100.1.1.5,RADLAN-SSL::rlSslCertificateGenerationLocalityName,OCTET,read-write,,current,,Value of locality field that will appear when a new certificate or self signed certificate is generated.
.1.3.6.1.4.1.89.100.1.1.6,RADLAN-SSL::rlSslCertificateGenerationOrganizationName,OCTET,read-write,,current,,Value of organization field that will appear when a new certificate or self signed certificate is generated.
.1.3.6.1.4.1.89.100.1.1.7,RADLAN-SSL::rlSslCertificateGenerationOrganizationUnitName,OCTET,read-write,,current,,Value of organization field that will appear when a new certificate or self signed certificate is generated.
.1.3.6.1.4.1.89.100.1.1.8,RADLAN-SSL::rlSslCertificateGenerationCommonName,OCTET,read-write,,current,,Value of common name field that will appear when a new certificate or self signed certificate is generated.
.1.3.6.1.4.1.89.100.1.1.9,RADLAN-SSL::rlSslCertificateGenerationValidDays,INTEGER,read-write,,current,,When generating self signed certificate this field sets the valid fields. 'Valid from' is current GMT and 'valid to' current GMT + the value of this field.
.1.3.6.1.4.1.89.100.1.1.10,RADLAN-SSL::rlSslCertificateGenerationRsaKeyLength,INTEGER,read-write,,current,,Setting the RSA key size that will be created when a new key is generated - generateRsaKeyAndSelfSignedCertificate
.1.3.6.1.4.1.89.100.1.1.11,RADLAN-SSL::rlSslCertificateGenerationPassphrase,OCTET,read-write,,current,,When a RSA key is generated (generateRsaKeyAndSelfSignedCertificate) this passphrase is saved in flash and when the time comes and the certificate and the key are exported in PKCS12 format this passphrase is used to encrypt it. If the passphrase is empty the key and certificate can not be exported. There is no method of obtaining this passphrase once a key was generated.
.1.3.6.1.4.1.89.100.1.1.12,RADLAN-SSL::rlSslCertificateGenerationAction,INTEGER,read-write,,current,generateRsaKeyAndSelfSignedCertificate(1):generateSelfSignedCertificate(2):generatePkcs12(3):generateCertificateRequest(4),Setting to a regenerateCertificate causes a new certificate to be generated and to be used for all new sessions.
.1.3.6.1.4.1.89.100.2,RADLAN-SSL::rlSslCertificateExportTable,,not-accessible,,current,,This table is used for viewing saved data from RAM and flash.
.1.3.6.1.4.1.89.100.2.1,RADLAN-SSL::rlSslCertificateExportEntry,,not-accessible,rlSslCertificateExportId:rlSslCertificateExportType:rlSslCertificateExportFragmentId,current,, The row definition for this table.
.1.3.6.1.4.1.89.100.2.1.1,RADLAN-SSL::rlSslCertificateExportId,INTEGER,read-only,,current,,Identifies the index of this certficate / certificate request the table holds.
.1.3.6.1.4.1.89.100.2.1.2,RADLAN-SSL::rlSslCertificateExportType,INTEGER,read-only,,current,certificateRequestPemFormat(1):certificatePemFormat(2):certificateOpenSslFormat(3):certificateAndKeyPkcs12(4),Identifies the type of data the current entry shows.
.1.3.6.1.4.1.89.100.2.1.3,RADLAN-SSL::rlSslCertificateExportFragmentId,INTEGER,read-only,,current,,Identifies the index of this fragment in the certificate request.
.1.3.6.1.4.1.89.100.2.1.4,RADLAN-SSL::rlSslCertificateExportFragmentText,OCTET,read-only,,current,,A part of the readable text entry for the certificate request.
.1.3.6.1.4.1.89.100.3,RADLAN-SSL::rlSslCertificateSave,INTEGER,read-write,,current,,Saves data from rlSslCertificateImportTable to RAM and flash. When an external certificate should be copied to the device first we copy it to rlSslCertificateImportTable and then this scalar is set to the certificate id that we want to save - 1. All entries in rlSslCertificateImportTable that have this id and their format is equal to the current value of rlSslCertificateSaveFormat are concatenated. 2. If the imported certificate format is .. - section 1 result is validated against the key with the same index. If validation fails for any reason - the certificate is not saved and the setting this scalar fails. 3. If the imported certificate format is PKCS12 - section1 result is decrypted using rlSslImportedPKCS12CertificatePassphrase current value. If decryption fails for any reason the PKCS12 certificate and key are not saved to FLASH and setting this scalar fails.
.1.3.6.1.4.1.89.100.4,RADLAN-SSL::rlSslCertificateSaveFormat,INTEGER,read-write,,current,x509(1):pkcs12(2),.
.1.3.6.1.4.1.89.100.5,RADLAN-SSL::rlSslImportedPKCS12CertificatePassphrase,OCTET,read-write,,current,,.
.1.3.6.1.4.1.89.100.6,RADLAN-SSL::rlSslCertificateImportTable,,not-accessible,,current,,This table is used for copying an external certificate to the device - see rlSslCertificateSave
.1.3.6.1.4.1.89.100.6.1,RADLAN-SSL::rlSslCertificateImportEntry,,not-accessible,rlSslCertificateImportId:rlSslCertificateImportFormat:rlSslCertificateImportFragmentId,current,, The row definition for this table.
.1.3.6.1.4.1.89.100.6.1.1,RADLAN-SSL::rlSslCertificateImportId,INTEGER,read-write,,current,,The certificate ID.
.1.3.6.1.4.1.89.100.6.1.2,RADLAN-SSL::rlSslCertificateImportFormat,INTEGER,read-write,,current,x509(1):pkcs12(2),.
.1.3.6.1.4.1.89.100.6.1.3,RADLAN-SSL::rlSslCertificateImportFragmentId,INTEGER,read-write,,current,,Identifies the index of this fragment in the certificate.
.1.3.6.1.4.1.89.100.6.1.4,RADLAN-SSL::rlSslCertificateImportFragmentText,OCTET,read-write,,current,,A part of the readable text entry for the certificate.
.1.3.6.1.4.1.89.100.6.1.5,RADLAN-SSL::rlSslCertificateImportFragmentStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.89.101,RADLAN-MIB::rlWlanAccessPoint,,,,,,
.1.3.6.1.4.1.89.101.1,RADLAN-MAC-BASE-PRIO::rlMacBasePrioMibVersion,INTEGER,read-only,,current,,Indicates the snmp support version that is supported by this device.
.1.3.6.1.4.1.89.101.2,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSupport,OCTET,read-only,,current,,indicates which features of the max base prio are supported: (bit 0 is the most significant bit) bit 0 - ForceL3Cos bit 1 - SADA_TC 
.1.3.6.1.4.1.89.101.3,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosEnable,INTEGER,read-write,,current,enable(1):disable(2),This variable controlls the activation of ForceL3Cos feature in Mac base priority
.1.3.6.1.4.1.89.101.4,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosTable,,not-accessible,,current,,A table that contains information about ranges of addresses that are used in the mac based ptiority with the ForceL3Cos feature.
.1.3.6.1.4.1.89.101.4.1,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosEntry,,not-accessible,rlMacBasePrioForceL3CosAddress:rlMacBasePrioForceL3CosMask,current,,Information about ranges of MAC addresses that are used in the mac based priority with the ForeL3Cos feature
.1.3.6.1.4.1.89.101.4.1.1,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosAddress,OCTET,read-write,,current,,The range of address of this entry. The range may not hold MAC multicast addresses. 
.1.3.6.1.4.1.89.101.4.1.2,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosMask,OCTET,read-write,,current,,Indicate the mask to be logical-ANDed with the learned address before being compared to the value in the rlMacBasePrioForceL3CosAddress field.
.1.3.6.1.4.1.89.101.4.1.3,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.101.5,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosParamsTable,,not-accessible,,current,,The table holds the global parameters of the L3 cos :TC, UP,DSCP.
.1.3.6.1.4.1.89.101.5.1,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosParamsEntry,,not-accessible,rlMacBasePrioForceL3CosParamsEntryIndex,current,,
.1.3.6.1.4.1.89.101.5.1.1,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosParamsEntryIndex,INTEGER,read-write,,current,,Index of the ForceL3Cos parameters table.
.1.3.6.1.4.1.89.101.5.1.2,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosParamsEntryTC,INTEGER,read-write,,current,,The value of the globla TC
.1.3.6.1.4.1.89.101.5.1.3,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosParamsEntryUP,INTEGER,read-write,,current,,The value of the globla UP
.1.3.6.1.4.1.89.101.5.1.4,RADLAN-MAC-BASE-PRIO::rlMacBasePrioForceL3CosParamsEntryDSCP,INTEGER,read-write,,current,,The value of the globla DSCP
.1.3.6.1.4.1.89.101.6,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSADATCEnable,INTEGER,read-write,,current,enable(1):disable(2),This variable controlls the activation of SA/DA priority feature in Mac base priority
.1.3.6.1.4.1.89.101.7,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSADATCTable,,not-accessible,,current,,A table that contains information about ranges of addresses that are used in the mac based ptiority with the ForceL3Cos feature.
.1.3.6.1.4.1.89.101.7.1,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSADATCEntry,,not-accessible,rlMacBasePrioSADATCAddress:rlMacBasePrioSADATCMask,current,,Information about ranges of MAC addresses that are used in the mac based priority with the ForeL3Cos feature
.1.3.6.1.4.1.89.101.7.1.1,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSADATCAddress,OCTET,read-write,,current,,The range of address of this entry. The range may not hold MAC multicast addresses. 
.1.3.6.1.4.1.89.101.7.1.2,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSADATCMask,OCTET,read-write,,current,,Indicate the mask to be logical-ANDed with the learned address before being compared to the value in the rlMacBasePrioSADATCAddress field.
.1.3.6.1.4.1.89.101.7.1.3,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSADATCPrio,INTEGER,read-write,,current,,The priority that will assign to all MAC addresses that are match the range of this entry.
.1.3.6.1.4.1.89.101.7.1.4,RADLAN-MAC-BASE-PRIO::rlMacBasePrioSADATCRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.4.1.89.1000,RADLAN-MIB::rndEndOfMibGroup,,,,,,
.1.3.6.1.4.1.89.1000.1,RADLAN-MIB::rndEndOfMib,INTEGER,read-only,,mandatory,, This variable indicates this is the end of RND MIB.
.1.3.6.1.4.1.674,DCS3FRU-MIB::dell,,,,,,
.1.3.6.1.4.1.674.10892,DCS3FRU-MIB::server3,,,,,,
.1.3.6.1.4.1.674.10892.1,DCS3FRU-MIB::baseboardGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.0,MIB-Dell-10892::baseboardGroup#,,,,,,
.1.3.6.1.4.1.674.10892.1.0.1,MIB-Dell-10892::alertSystemHeartBeat,,,,,,The Dell OMSA Application generated a test trap.
.1.3.6.1.4.1.674.10892.1.0.1001,MIB-Dell-10892::alertSystemUp,,,,,,Server Administrator has completed its initialization.
.1.3.6.1.4.1.674.10892.1.0.1004,MIB-Dell-10892::alertThermalShutdown,,,,,,Thermal shutdown protection has been initiated.
.1.3.6.1.4.1.674.10892.1.0.1006,MIB-Dell-10892::alertAutomaticSystemRecovery,,,,,,Automatic system recovery (ASR) was performed.
.1.3.6.1.4.1.674.10892.1.0.1007,MIB-Dell-10892::alertUserHostSystemReset,,,,,,User has initiated host system reset.
.1.3.6.1.4.1.674.10892.1.0.1013,MIB-Dell-10892::alertSystemPeakPowerNewPeak,,,,,,System peak power sensor has detected a new peak value.
.1.3.6.1.4.1.674.10892.1.0.1014,MIB-Dell-10892::alertSystemSoftwareEvent,,,,,,System software event has occurred.
.1.3.6.1.4.1.674.10892.1.0.1018,MIB-Dell-10892::alertUnMonitoredSensorInfoEvent,,,,,,An Event has generated from UnMonitored Sensors.
.1.3.6.1.4.1.674.10892.1.0.1019,MIB-Dell-10892::alertUnMonitoredSensorWarningEvent,,,,,,An Event has generated from UnMonitored Sensors.
.1.3.6.1.4.1.674.10892.1.0.1020,MIB-Dell-10892::alertUnMonitoredSensorCriticalEvent,,,,,,An Event has generated from UnMonitored Sensors.
.1.3.6.1.4.1.674.10892.1.0.1052,MIB-Dell-10892::alertTemperatureProbeNormal,,,,,,Temperature probe has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.1053,MIB-Dell-10892::alertTemperatureProbeWarning,,,,,,Temperature probe has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.1054,MIB-Dell-10892::alertTemperatureProbeFailure,,,,,,Temperature probe has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.1055,MIB-Dell-10892::alertTemperatureProbeNonRecoverable,,,,,,Temperature probe has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.1102,MIB-Dell-10892::alertCoolingDeviceNormal,,,,,,Cooling device sensor has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.1103,MIB-Dell-10892::alertCoolingDeviceWarning,,,,,,Cooling device sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.1104,MIB-Dell-10892::alertCoolingDeviceFailure,,,,,,Cooling device sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.1105,MIB-Dell-10892::alertCoolingDeviceNonRecoverable,,,,,,Cooling device sensor has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.1152,MIB-Dell-10892::alertVoltageProbeNormal,,,,,,Voltage probe has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.1153,MIB-Dell-10892::alertVoltageProbeWarning,,,,,,Voltage probe has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.1154,MIB-Dell-10892::alertVoltageProbeFailure,,,,,,Voltage probe has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.1155,MIB-Dell-10892::alertVoltageProbeNonRecoverable,,,,,,Voltage probe has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.1202,MIB-Dell-10892::alertAmperageProbeNormal,,,,,,Amperage probe has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.1203,MIB-Dell-10892::alertAmperageProbeWarning,,,,,,Amperage probe has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.1204,MIB-Dell-10892::alertAmperageProbeFailure,,,,,,Amperage probe has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.1205,MIB-Dell-10892::alertAmperageProbeNonRecoverable,,,,,,Amperage probe has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.1252,MIB-Dell-10892::alertChassisIntrusionNormal,,,,,,Chassis intrusion has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.1254,MIB-Dell-10892::alertChassisIntrusionDetected,,,,,,Chassis intrusion has been detected.
.1.3.6.1.4.1.674.10892.1.0.1258,MIB-Dell-10892::alertDriveBayIntrusionNormal,,,,,,Drive Bay intrusion has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.1259,MIB-Dell-10892::alertDriveBayIntrusionDetected,,,,,,Drive Bay intrusion has been detected
.1.3.6.1.4.1.674.10892.1.0.1261,MIB-Dell-10892::alertDriveBayIntrusionDetectedExtended,,,,,,Drive Bay intrusion has been detected for extended period of time.
.1.3.6.1.4.1.674.10892.1.0.1304,MIB-Dell-10892::alertRedundancyNormal,,,,,,Redundancy has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.1305,MIB-Dell-10892::alertRedundancyDegraded,,,,,,Redundancy has been degraded.
.1.3.6.1.4.1.674.10892.1.0.1306,MIB-Dell-10892::alertRedundancyLost,,,,,,Redundancy has been lost.
.1.3.6.1.4.1.674.10892.1.0.1352,MIB-Dell-10892::alertPowerSupplyNormal,,,,,,Power supply has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.1353,MIB-Dell-10892::alertPowerSupplyWarning,,,,,,Power supply has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.1354,MIB-Dell-10892::alertPowerSupplyFailure,,,,,,Power supply has detected a failure.
.1.3.6.1.4.1.674.10892.1.0.1402,MIB-Dell-10892::alertMemoryDeviceNormal,,,,,,Memory device status is normal.
.1.3.6.1.4.1.674.10892.1.0.1403,MIB-Dell-10892::alertMemoryDeviceWarning,,,,,,Memory device status is noncritical.
.1.3.6.1.4.1.674.10892.1.0.1404,MIB-Dell-10892::alertMemoryDeviceFailure,,,,,,Memory device status is critical.
.1.3.6.1.4.1.674.10892.1.0.1405,MIB-Dell-10892::alertMemoryDeviceNonRecoverable,,,,,,Memory device status is non-recoverable.
.1.3.6.1.4.1.674.10892.1.0.1425,MIB-Dell-10892::alertMemoryDeviceNVDIMMPersistencyRestored,,,,,,Memory device NVDIMM Persistency Restored.
.1.3.6.1.4.1.674.10892.1.0.1426,MIB-Dell-10892::alertMemoryDeviceNVDIMMWarning,,,,,,Memory device NVM Lifetime less than Five Percent.
.1.3.6.1.4.1.674.10892.1.0.1427,MIB-Dell-10892::alertMemoryDeviceNVDIMMNotReady,,,,,,Memory device NVDIMM Not Ready.
.1.3.6.1.4.1.674.10892.1.0.1428,MIB-Dell-10892::alertMemoryDeviceNVDIMMSaveError,,,,,,Memory device NVDIMM Save Error.
.1.3.6.1.4.1.674.10892.1.0.1429,MIB-Dell-10892::alertMemoryDeviceNVDIMMRestoreError,,,,,,Memory device NVDIMM Restore Error or Restore Timeout.
.1.3.6.1.4.1.674.10892.1.0.1430,MIB-Dell-10892::alertMemoryDeviceNVDIMMConfigErr,,,,,,Memory device Illegal NVDIMM Configuration error.
.1.3.6.1.4.1.674.10892.1.0.1431,MIB-Dell-10892::alertMemoryDeviceNVDIMMNotResponding,,,,,,Memory device NVDIMM Not Responding.
.1.3.6.1.4.1.674.10892.1.0.1432,MIB-Dell-10892::alertMemoryDeviceNVDIMMArmFailure,,,,,,Memory device NVDIMM Arm Failure.
.1.3.6.1.4.1.674.10892.1.0.1433,MIB-Dell-10892::alertMemoryDeviceNVDIMMWriteProtectMode,,,,,,Memory device all NVDIMMs in Write-Protect Mode.
.1.3.6.1.4.1.674.10892.1.0.1434,MIB-Dell-10892::alertMemoryDeviceNVMLifetimeExpired,,,,,,Memory device NVM Lifetime Expired.
.1.3.6.1.4.1.674.10892.1.0.1435,MIB-Dell-10892::alertMemoryDeviceNVDIMMPersistencyLost,,,,,,Memory device NVDIMM Persistency Lost
.1.3.6.1.4.1.674.10892.1.0.1436,MIB-Dell-10892::alertMemoryDeviceAEPWarning,,,,,,A Non-Critical event was detected on the Non-Volatile Dual In-line Memory Module NVDIMM device
.1.3.6.1.4.1.674.10892.1.0.1437,MIB-Dell-10892::alertMemoryDeviceAEPError,,,,,,A Critical event was detected on the Non-Volatile Dual In-line Memory Module NVDIMM device
.1.3.6.1.4.1.674.10892.1.0.1438,MIB-Dell-10892::alertMemoryDeviceAEPInfo,,,,,,An Information-Only event was detected on the Non-Volatile Dual In-line Memory Module NVDIMM device. The NVDIMM is operating normally.
.1.3.6.1.4.1.674.10892.1.0.1439,MIB-Dell-10892::alertMemorySelfhealInitiate,,,,,,The memory health monitor feature has detected a degradation in the DIMM installed. Reboot system to initiate self-heal process.
.1.3.6.1.4.1.674.10892.1.0.1440,MIB-Dell-10892::alertMemoryDevicePPRSuccess,,,,,,The self-heal operation successfully completed at DIMM.
.1.3.6.1.4.1.674.10892.1.0.1441,MIB-Dell-10892::alertMemoryDevicePPRFail,,,,,,Unable to complete the self-heal process of the memory in the DIMM because of internal issues.
.1.3.6.1.4.1.674.10892.1.0.1452,MIB-Dell-10892::alertFanEnclosureInsertion,,,,,,Fan enclosure has been inserted into system.
.1.3.6.1.4.1.674.10892.1.0.1453,MIB-Dell-10892::alertFanEnclosureRemoval,,,,,,Fan enclosure has been removed from system.
.1.3.6.1.4.1.674.10892.1.0.1454,MIB-Dell-10892::alertFanEnclosureExtendedRemoval,,,,,,Fan enclosure has been removed from system for an extended amount of time.
.1.3.6.1.4.1.674.10892.1.0.1501,MIB-Dell-10892::for,,,,,,AC power cord does not have power, and the reduncancy mode
.1.3.6.1.4.1.674.10892.1.0.1502,MIB-Dell-10892::alertACPowerCordNormal,,,,,,AC power cord has regained power.
.1.3.6.1.4.1.674.10892.1.0.1504,MIB-Dell-10892::alertACPowerCordFailure,,,,,,AC power cord has lost power.
.1.3.6.1.4.1.674.10892.1.0.1552,MIB-Dell-10892::alertLogNormal,,,,,,Log size is no longer near or at capacity.
.1.3.6.1.4.1.674.10892.1.0.1553,MIB-Dell-10892::alertLogWarning,,,,,,Log size is near capacity.
.1.3.6.1.4.1.674.10892.1.0.1554,MIB-Dell-10892::alertLogFull,,,,,,Log size is at capacity.
.1.3.6.1.4.1.674.10892.1.0.1602,MIB-Dell-10892::alertProcessorDeviceStatusNormal,,,,,,Processor device status has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.1603,MIB-Dell-10892::alertProcessorDeviceStatusWarning,,,,,,Processor device status has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.1604,MIB-Dell-10892::alertProcessorDeviceStatusFailure,,,,,,Processor device status has detected a failure.
.1.3.6.1.4.1.674.10892.1.0.1651,MIB-Dell-10892::alertDeviceAdd,,,,,,Device added to system.
.1.3.6.1.4.1.674.10892.1.0.1652,MIB-Dell-10892::alertDeviceRemove,,,,,,Device removed from system.
.1.3.6.1.4.1.674.10892.1.0.1653,MIB-Dell-10892::alertDeviceConfigError,,,,,,Device configuration error detected.
.1.3.6.1.4.1.674.10892.1.0.1702,MIB-Dell-10892::alertBatteryNormal,,,,,,Battery has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.1703,MIB-Dell-10892::alertBatteryWarning,,,,,,Battery has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.1704,MIB-Dell-10892::alertBatteryFailure,,,,,,Battery has detected a failure.
.1.3.6.1.4.1.674.10892.1.0.1706,MIB-Dell-10892::alertBatteryAbsent,,,,,,Battery has found to be Absent.
.1.3.6.1.4.1.674.10892.1.0.1753,MIB-Dell-10892::alertSDCardDeviceWarning,,,,,,SD card device has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.1754,MIB-Dell-10892::alertSDCardDeviceFailure,,,,,,SD card device has detected a failure.
.1.3.6.1.4.1.674.10892.1.0.5001,MIB-Dell-10892::enhancedAlertSystemUp,,,,,,Server Administrator has completed its initialization.
.1.3.6.1.4.1.674.10892.1.0.5004,MIB-Dell-10892::enhancedAlertThermalShutdown,,,,,,Thermal shutdown protection has been initiated.
.1.3.6.1.4.1.674.10892.1.0.5006,MIB-Dell-10892::enhancedAlertAutomaticSystemRecovery,,,,,,Automatic system recovery (ASR) was performed.
.1.3.6.1.4.1.674.10892.1.0.5007,MIB-Dell-10892::enhancedAlertUserHostSystemReset,,,,,,User has initiated host system reset.
.1.3.6.1.4.1.674.10892.1.0.5013,MIB-Dell-10892::enhancedAlertSystemPeakPowerNewPeak,,,,,,System peak power sensor has detected a new peak value.
.1.3.6.1.4.1.674.10892.1.0.5014,MIB-Dell-10892::enhancedAlertSystemSoftwareEvent,,,,,,System software event has occurred.
.1.3.6.1.4.1.674.10892.1.0.5015,MIB-Dell-10892::enhancedAlertUnMonitoredSensorInfoEvent,,,,,,An Event has generated from UnMonitored Sensors.
.1.3.6.1.4.1.674.10892.1.0.5016,MIB-Dell-10892::enhancedAlertUnMonitoredSensorWarningEvent,,,,,,An Event has generated from UnMonitored Sensors.
.1.3.6.1.4.1.674.10892.1.0.5017,MIB-Dell-10892::enhancedAlertUnMonitoredSensorCriticalEvent,,,,,,An Event has generated from UnMonitored Sensors.
.1.3.6.1.4.1.674.10892.1.0.5052,MIB-Dell-10892::enhancedAlertTemperatureProbeNormal,,,,,,Temperature probe has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.5053,MIB-Dell-10892::enhancedAlertTemperatureProbeWarning,,,,,,Temperature probe has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.5054,MIB-Dell-10892::enhancedAlertTemperatureProbeFailure,,,,,,Temperature probe has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.5055,MIB-Dell-10892::enhancedAlertTemperatureProbeNonRecoverable,,,,,,Temperature probe has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.5102,MIB-Dell-10892::enhancedAlertCoolingDeviceNormal,,,,,,Cooling device sensor has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.5103,MIB-Dell-10892::enhancedAlertCoolingDeviceWarning,,,,,,Cooling device sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.5104,MIB-Dell-10892::enhancedAlertCoolingDeviceFailure,,,,,,Cooling device sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.5105,MIB-Dell-10892::enhancedAlertCoolingDeviceNonRecoverable,,,,,,Cooling device sensor has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.5152,MIB-Dell-10892::enhancedAlertVoltageProbeNormal,,,,,,Voltage probe has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.5153,MIB-Dell-10892::enhancedAlertVoltageProbeWarning,,,,,,Voltage probe has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.5154,MIB-Dell-10892::enhancedAlertVoltageProbeFailure,,,,,,Voltage probe has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.5155,MIB-Dell-10892::enhancedAlertVoltageProbeNonRecoverable,,,,,,Voltage probe has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.5202,MIB-Dell-10892::enhancedAlertAmperageProbeNormal,,,,,,Amperage probe has returned to a normal value.
.1.3.6.1.4.1.674.10892.1.0.5203,MIB-Dell-10892::enhancedAlertAmperageProbeWarning,,,,,,Amperage probe has detected a warning value.
.1.3.6.1.4.1.674.10892.1.0.5204,MIB-Dell-10892::enhancedAlertAmperageProbeFailure,,,,,,Amperage probe has detected a failure value.
.1.3.6.1.4.1.674.10892.1.0.5205,MIB-Dell-10892::enhancedAlertAmperageProbeNonRecoverable,,,,,,Amperage probe has detected a non-recoverable value.
.1.3.6.1.4.1.674.10892.1.0.5252,MIB-Dell-10892::enhancedAlertChassisIntrusionNormal,,,,,,Chassis intrusion has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.5254,MIB-Dell-10892::enhancedAlertChassisIntrusionDetected,,,,,,Chassis intrusion has been detected.
.1.3.6.1.4.1.674.10892.1.0.5258,MIB-Dell-10892::enhancedAlertDriveBayIntrusionNormal,,,,,,Drive Bay intrusion has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.5259,MIB-Dell-10892::enhancedAlertDriveBayIntrusionDetected,,,,,,Drive Bay intrusion has been detected.
.1.3.6.1.4.1.674.10892.1.0.5261,MIB-Dell-10892::enhancedAlertDriveBayIntrusionDetectedExtended,,,,,,Drive Bay intrusion has been detected for extended period of time.
.1.3.6.1.4.1.674.10892.1.0.5304,MIB-Dell-10892::enhancedAlertRedundancyNormal,,,,,,Redundancy has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.5305,MIB-Dell-10892::enhancedAlertRedundancyDegraded,,,,,,Redundancy has been degraded.
.1.3.6.1.4.1.674.10892.1.0.5306,MIB-Dell-10892::enhancedAlertRedundancyLost,,,,,,Redundancy has been lost.
.1.3.6.1.4.1.674.10892.1.0.5352,MIB-Dell-10892::enhancedAlertPowerSupplyNormal,,,,,,Power supply has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.5353,MIB-Dell-10892::enhancedAlertPowerSupplyWarning,,,,,,Power supply has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.5354,MIB-Dell-10892::enhancedAlertPowerSupplyFailure,,,,,,Power supply has detected a failure.
.1.3.6.1.4.1.674.10892.1.0.5402,MIB-Dell-10892::enhancedAlertMemoryDeviceNormal,,,,,,Memory device status is normal.
.1.3.6.1.4.1.674.10892.1.0.5403,MIB-Dell-10892::enhancedAlertMemoryDeviceWarning,,,,,,Memory device status is noncritical.
.1.3.6.1.4.1.674.10892.1.0.5404,MIB-Dell-10892::enhancedAlertMemoryDeviceFailure,,,,,,Memory device status is critical.
.1.3.6.1.4.1.674.10892.1.0.5405,MIB-Dell-10892::enhancedAlertMemoryDeviceNonRecoverable,,,,,,Memory device status is non-recoverable.
.1.3.6.1.4.1.674.10892.1.0.5425,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMPersistencyRestored,,,,,,Memory device NVDIMM Persistency Restored.
.1.3.6.1.4.1.674.10892.1.0.5426,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMWarning,,,,,,Memory device NVM Lifetime less than Five Percent.
.1.3.6.1.4.1.674.10892.1.0.5427,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMNotReady,,,,,,Memory device NVDIMM Not Ready.
.1.3.6.1.4.1.674.10892.1.0.5428,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMSaveError,,,,,,Memory device NVDIMM Save Error.
.1.3.6.1.4.1.674.10892.1.0.5429,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMRestoreError,,,,,,Memory device NVDIMM Restore Error or Restore Timeout.
.1.3.6.1.4.1.674.10892.1.0.5430,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMConfigErr,,,,,,Memory device Illegal NVDIMM Configuration error.
.1.3.6.1.4.1.674.10892.1.0.5431,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMNotResponding,,,,,,Memory device NVDIMM Not Responding.
.1.3.6.1.4.1.674.10892.1.0.5432,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMArmFailure,,,,,,Memory device NVDIMM Arm Failure.
.1.3.6.1.4.1.674.10892.1.0.5433,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMWriteProtectMode,,,,,,Memory device all NVDIMMs in Write-Protect Mode.
.1.3.6.1.4.1.674.10892.1.0.5434,MIB-Dell-10892::enhancedAlertMemoryDeviceNVMLifetimeExpired,,,,,,Memory device NVM Lifetime Expired.
.1.3.6.1.4.1.674.10892.1.0.5435,MIB-Dell-10892::enhancedAlertMemoryDeviceNVDIMMPersistencyLost,,,,,,Memory device NVDIMM Persistency Lost
.1.3.6.1.4.1.674.10892.1.0.5436,MIB-Dell-10892::enhancedAlertMemoryDeviceAEPError,,,,,,A Critical event was detected on the Non-Volatile Dual In-line Memory Module NVDIMM device
.1.3.6.1.4.1.674.10892.1.0.5437,MIB-Dell-10892::enhancedAlertMemoryDeviceAEPWarning,,,,,,A Non-Critical event was detected on the Non-Volatile Dual In-line Memory Module NVDIMM device
.1.3.6.1.4.1.674.10892.1.0.5438,MIB-Dell-10892::enhancedAlertMemoryDeviceAEPInfo,,,,,,An Information-Only event was detected on the Non-Volatile Dual In-line Memory Module NVDIMM device. The NVDIMM is operating normally.
.1.3.6.1.4.1.674.10892.1.0.5439,MIB-Dell-10892::enhancedAlertMemorySelfhealInitiate,,,,,,The memory health monitor feature has detected a degradation in the DIMM installed. Reboot system to initiate self-heal process.
.1.3.6.1.4.1.674.10892.1.0.5440,MIB-Dell-10892::enhancedAlertMemoryDevicePPRSuccess,,,,,,The self-heal operation successfully completed at DIMM.
.1.3.6.1.4.1.674.10892.1.0.5441,MIB-Dell-10892::enhancedAlertMemoryDevicePPRFail,,,,,,Unable to complete the self-heal process of the memory in the DIMM installed because of internal issues.
.1.3.6.1.4.1.674.10892.1.0.5452,MIB-Dell-10892::enhancedAlertFanEnclosureInsertion,,,,,,Fan enclosure has been inserted into system.
.1.3.6.1.4.1.674.10892.1.0.5453,MIB-Dell-10892::enhancedAlertFanEnclosureRemoval,,,,,,Fan enclosure has been removed from system.
.1.3.6.1.4.1.674.10892.1.0.5454,MIB-Dell-10892::enhancedAlertFanEnclosureExtendedRemoval,,,,,,Fan enclosure has been removed from system for an extended amount of time.
.1.3.6.1.4.1.674.10892.1.0.5501,MIB-Dell-10892::for,,,,,,AC power cord does not have power, and the reduncancy mode
.1.3.6.1.4.1.674.10892.1.0.5502,MIB-Dell-10892::enhancedAlertACPowerCordNormal,,,,,,AC power cord has regained power.
.1.3.6.1.4.1.674.10892.1.0.5504,MIB-Dell-10892::enhancedAlertACPowerCordFailure,,,,,,AC power cord has lost power.
.1.3.6.1.4.1.674.10892.1.0.5552,MIB-Dell-10892::enhancedAlertLogNormal,,,,,,Log size is no longer near or at capacity.
.1.3.6.1.4.1.674.10892.1.0.5553,MIB-Dell-10892::enhancedAlertLogWarning,,,,,,Log size is near capacity.
.1.3.6.1.4.1.674.10892.1.0.5554,MIB-Dell-10892::enhancedAlertLogFull,,,,,,Log size is at capacity.
.1.3.6.1.4.1.674.10892.1.0.5602,MIB-Dell-10892::enhancedAlertProcessorDeviceStatusNormal,,,,,,Processor device status has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.5603,MIB-Dell-10892::enhancedAlertProcessorDeviceStatusWarning,,,,,,Processor device status has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.5604,MIB-Dell-10892::enhancedAlertProcessorDeviceStatusFailure,,,,,,Processor device status has detected a failure.
.1.3.6.1.4.1.674.10892.1.0.5651,MIB-Dell-10892::enhancedAlertDeviceAdd,,,,,,Device added to system.
.1.3.6.1.4.1.674.10892.1.0.5652,MIB-Dell-10892::enhancedAlertDeviceRemove,,,,,,Device removed from system.
.1.3.6.1.4.1.674.10892.1.0.5653,MIB-Dell-10892::enhancedAlertDeviceConfigError,,,,,,Device configuration error detected.
.1.3.6.1.4.1.674.10892.1.0.5702,MIB-Dell-10892::enhancedAlertBatteryNormal,,,,,,Battery has returned to normal.
.1.3.6.1.4.1.674.10892.1.0.5703,MIB-Dell-10892::enhancedAlertBatteryWarning,,,,,,Battery has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.5704,MIB-Dell-10892::enhancedAlertBatteryFailure,,,,,,Battery has detected a failure.
.1.3.6.1.4.1.674.10892.1.0.5706,MIB-Dell-10892::enhancedAlertBatteryAbsent,,,,,,Battery has found to be Absent.
.1.3.6.1.4.1.674.10892.1.0.5753,MIB-Dell-10892::enhancedAlertSDCardDeviceWarning,,,,,,SD card device has detected a warning.
.1.3.6.1.4.1.674.10892.1.0.5754,MIB-Dell-10892::enhancedAlertSDCardDeviceFailure,,,,,,SD card device has detected a failure.
.1.3.6.1.4.1.674.10892.1.1,MIB-Dell-10892::mIBVersionGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1.1,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0001.0001 This attribute defines the major version number for the version
.1.3.6.1.4.1.674.10892.1.1.2,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0001.0002 This attribute defines the minor version number for the version
.1.3.6.1.4.1.674.10892.1.1.3,MIB-Dell-10892::version,INTEGER,read-only,,mandatory,,0001.0003 This attribute defines the maintenance version number for the
.1.3.6.1.4.1.674.10892.1.100,MIB-Dell-10892::systemManagementSoftwareGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.100.1,MIB-Dell-10892::systems,OCTET,read-only,,mandatory,,0100.0001 This attribute defines the product name of the
.1.3.6.1.4.1.674.10892.1.100.2,MIB-Dell-10892::instrumentation,OCTET,read-only,,mandatory,,0100.0002 This attribute defines the version number of the
.1.3.6.1.4.1.674.10892.1.100.3,MIB-Dell-10892::instrumentation,INTEGER,read-only,,mandatory,,0100.0003 This attribute defines the build number of the
.1.3.6.1.4.1.674.10892.1.100.4,MIB-Dell-10892::systems,OCTET,read-only,,mandatory,,0100.0004 This attribute defines the description of the
.1.3.6.1.4.1.674.10892.1.100.5,MIB-Dell-10892::instrumentation,INTEGER,read-only,,mandatory,supportsSNMP(1):supportsDMI(2):supportsSNMPandDMI(3):supportsCIMOM(4):supportsSNMPandCIMOM(5):supportsSNMPandDMIandCIMOM(7),0100.0005 This attribute defines the protocols supported by the
.1.3.6.1.4.1.674.10892.1.100.6,MIB-Dell-10892::instrumentation,INTEGER,read-only,,mandatory,supportsSNMP(1):supportsDMI(2):supportsSNMPandDMI(3):supportsCIMOM(4):supportsSNMPandCIMOM(5):supportsSNMPandDMIandCIMOM(7),0100.0006 This attribute defines the protocol preferred by the
.1.3.6.1.4.1.674.10892.1.100.7,MIB-Dell-10892::instrumentation,OCTET,read-only,,mandatory,,0100.0007 This attribute defines the update level of the
.1.3.6.1.4.1.674.10892.1.100.8,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0100.0008 This attribute defines the Universal Resource Locator (URL)
.1.3.6.1.4.1.674.10892.1.100.9,MIB-Dell-10892::systems,OCTET,read-only,,mandatory,,0100.0009 This attribute defines the language of the
.1.3.6.1.4.1.674.10892.1.100.10,MIB-Dell-10892::systems,OCTET,read-only,,mandatory,,0100.0010 This attribute defines the global version of the
.1.3.6.1.4.1.674.10892.1.100.11,MIB-Dell-10892::a,INTEGER,read-only,,mandatory,webOneToOneManagementPreferred(1),0100.0011 This attribute defines the features of the systems management
.1.3.6.1.4.1.674.10892.1.100.12,MIB-Dell-10892::in,INTEGER,read-only,,mandatory,supportsSparseTables(1),0100.0012 This attribute defines the features of the SNMP agent
.1.3.6.1.4.1.674.10892.1.100.13,MIB-Dell-10892::systems,OCTET,read-only,,mandatory,,0100.0013 This attribute defines the manufacturer of the
.1.3.6.1.4.1.674.10892.1.100.14,MIB-Dell-10892::Product,INTEGER,read-only,,mandatory,,0100.0014 This attribute defines the current state of the
.1.3.6.1.4.1.674.10892.1.200,MIB-Dell-10892::systemStateGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.200.10,MIB-Dell-10892::systemStateTable,,not-accessible,,mandatory,,0200.0010 This object defines the System State Table.
.1.3.6.1.4.1.674.10892.1.200.10.1,MIB-Dell-10892::systemStateTableEntry,,not-accessible,systemStatechassisIndex,mandatory,,0200.0010.0001 This object defines the System State Table Entry.
.1.3.6.1.4.1.674.10892.1.200.10.1.1,MIB-Dell-10892::systemStatechassisIndex,INTEGER,read-only,,mandatory,,0200.0010.0001.0001 This attribute defines the index (one based) of this
.1.3.6.1.4.1.674.10892.1.200.10.1.2,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0002 This attribute defines the global system status
.1.3.6.1.4.1.674.10892.1.200.10.1.3,MIB-Dell-10892::systemStateChassisState,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0200.0010.0001.0003 This attribute defines the state settings of this
.1.3.6.1.4.1.674.10892.1.200.10.1.4,MIB-Dell-10892::systemStateChassisStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0004 This attribute defines the status of this chassis.
.1.3.6.1.4.1.674.10892.1.200.10.1.5,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0005 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.6,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0200.0010.0001.0006 This attribute defines the combined redundancy status
.1.3.6.1.4.1.674.10892.1.200.10.1.7,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0200.0010.0001.0007 This attribute lists the redundancy status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.8,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0008 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.9,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0009 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.10,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0010 This attribute lists the status of each power supply
.1.3.6.1.4.1.674.10892.1.200.10.1.11,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0011 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.12,MIB-Dell-10892::voltage,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0012 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.13,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0013 This attribute lists the status of each voltage probe
.1.3.6.1.4.1.674.10892.1.200.10.1.14,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0014 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.15,MIB-Dell-10892::amperage,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0015 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.16,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0016 This attribute lists the status of each amperage probe
.1.3.6.1.4.1.674.10892.1.200.10.1.17,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0017 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.18,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0200.0010.0001.0018 This attribute defines the combined redundancy status
.1.3.6.1.4.1.674.10892.1.200.10.1.19,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0200.0010.0001.0019 This attribute lists the redundancy status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.20,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0020 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.21,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0021 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.22,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0022 This attribute lists the status of each cooling device
.1.3.6.1.4.1.674.10892.1.200.10.1.23,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0023 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.24,MIB-Dell-10892::temperature,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0024 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.25,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0025 This attribute lists the status of each temperature probe
.1.3.6.1.4.1.674.10892.1.200.10.1.26,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0026 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.27,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0027 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.28,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0028 This attribute lists the status of each memory device
.1.3.6.1.4.1.674.10892.1.200.10.1.29,MIB-Dell-10892::The,OCTET,read-only,,mandatory,,0200.0010.0001.0029 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.30,MIB-Dell-10892::intrusion,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0030 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.31,MIB-Dell-10892::same,OCTET,read-only,,mandatory,,0200.0010.0001.0031 This attribute lists the status of each intrusion
.1.3.6.1.4.1.674.10892.1.200.10.1.32,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0032 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.33,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0200.0010.0001.0033 This attribute defines the combined redundancy status
.1.3.6.1.4.1.674.10892.1.200.10.1.34,MIB-Dell-10892::type,OCTET,read-only,,mandatory,,0200.0010.0001.0034 This attribute lists the redundancy status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.35,MIB-Dell-10892::AC,OCTET,read-only,,mandatory,,0200.0010.0001.0035 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.36,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0036 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.37,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0037 This attribute lists the status of each AC power cord
.1.3.6.1.4.1.674.10892.1.200.10.1.38,MIB-Dell-10892::The,OCTET,read-only,,mandatory,,0200.0010.0001.0038 This attribute lists the state settings of each
.1.3.6.1.4.1.674.10892.1.200.10.1.39,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0200.0010.0001.0039 This attribute defines the combined redundancy status
.1.3.6.1.4.1.674.10892.1.200.10.1.40,MIB-Dell-10892::the,OCTET,read-only,,mandatory,,0200.0010.0001.0040 This attribute lists the redundancy status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.41,MIB-Dell-10892::(ESM),INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0041 This attribute defines the overall status of the
.1.3.6.1.4.1.674.10892.1.200.10.1.42,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0042 This attribute defines the combined status
.1.3.6.1.4.1.674.10892.1.200.10.1.43,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0043 This attribute lists the status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.44,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0044 This attribute defines the combined status
.1.3.6.1.4.1.674.10892.1.200.10.1.45,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0045 This attribute lists the status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.46,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0046 This attribute defines the combined status
.1.3.6.1.4.1.674.10892.1.200.10.1.47,MIB-Dell-10892::as,OCTET,read-only,,mandatory,,0200.0010.0001.0047 This attribute lists the status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.48,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0048 This attribute defines the combined status
.1.3.6.1.4.1.674.10892.1.200.10.1.49,MIB-Dell-10892::type,OCTET,read-only,,mandatory,,0200.0010.0001.0049 This attribute lists the status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.50,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0050 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.51,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0051 This attribute lists the status of each processor device
.1.3.6.1.4.1.674.10892.1.200.10.1.52,MIB-Dell-10892::batteries,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0052 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.53,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0053 This attribute lists the status of each battery
.1.3.6.1.4.1.674.10892.1.200.10.1.54,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0054 This attribute defines the combined status
.1.3.6.1.4.1.674.10892.1.200.10.1.55,MIB-Dell-10892::type,OCTET,read-only,,mandatory,,0200.0010.0001.0055 This attribute lists the status of each
.1.3.6.1.4.1.674.10892.1.200.10.1.56,MIB-Dell-10892::SD,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0200.0010.0001.0056 This attribute defines the combined status of all
.1.3.6.1.4.1.674.10892.1.200.10.1.57,MIB-Dell-10892::etc.,OCTET,read-only,,mandatory,,0200.0010.0001.0057 This attribute lists the status of each SD Card device
.1.3.6.1.4.1.674.10892.1.300,MIB-Dell-10892::chassisInformationGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.300.10,MIB-Dell-10892::chassisInformationTable,,not-accessible,,mandatory,,0300.0010 This object defines the Chassis Information Table.
.1.3.6.1.4.1.674.10892.1.300.10.1,MIB-Dell-10892::chassisInformationTableEntry,,not-accessible,chassisIndexChassisInformation,mandatory,,0300.0010.0001 This object defines the Chassis Information Table Entry.
.1.3.6.1.4.1.674.10892.1.300.10.1.1,MIB-Dell-10892::chassisIndexChassisInformation,INTEGER,read-only,,mandatory,,0300.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.10.1.2,MIB-Dell-10892::chassisStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0010.0001.0002 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.3,MIB-Dell-10892::chassisStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0010.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.300.10.1.4,MIB-Dell-10892::chassisStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0300.0010.0001.0004 This attribute defines the status of the chassis.
.1.3.6.1.4.1.674.10892.1.300.10.1.5,MIB-Dell-10892::parent,INTEGER,read-only,,mandatory,,0300.0010.0001.0005 This attribute defines the index (one based) to the
.1.3.6.1.4.1.674.10892.1.300.10.1.6,MIB-Dell-10892::chassisType,INTEGER,read-only,,mandatory,other(1):unknown(2):desktop(3):lowProfileDesktop(4):pizzaBox(5):miniTower(6):tower(7):portable(8):lapTop(9):noteBook(10):handHeld(11):dockingStation(12):allInOne(13):subNoteBook(14):spaceSaving(15):lunchBox(16):mainSystemChassis(17):expansionChassis(18):subChassis(19):busExpansionChassis(20):peripheralChassis(21):raidChassis(22):rackMountChassis(23):sealedCasePC(24):multiSystemChassis(25),0300.0010.0001.0006 This attribute defines the chassis type of the chassis.
.1.3.6.1.4.1.674.10892.1.300.10.1.7,MIB-Dell-10892::chassisName,OCTET,read-only,,mandatory,,0300.0010.0001.0007 This attribute defines the user-assigned name of the
.1.3.6.1.4.1.674.10892.1.300.10.1.8,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0300.0010.0001.0008 This attribute defines the name of the manufacturer
.1.3.6.1.4.1.674.10892.1.300.10.1.9,MIB-Dell-10892::chassisModelName,OCTET,read-only,,mandatory,,0300.0010.0001.0009 This attribute defines the system model type of the
.1.3.6.1.4.1.674.10892.1.300.10.1.10,MIB-Dell-10892::chassisAssetTagName,OCTET,read-only,,mandatory,,0300.0010.0001.0010 This attribute defines the asset tag name of the
.1.3.6.1.4.1.674.10892.1.300.10.1.11,MIB-Dell-10892::chassisServiceTagName,OCTET,read-only,,mandatory,,0300.0010.0001.0011 This attribute defines the service tag name of the
.1.3.6.1.4.1.674.10892.1.300.10.1.12,MIB-Dell-10892::is,INTEGER,read-only,,mandatory,,0300.0010.0001.0012 This attribute defines the system ID. If the value
.1.3.6.1.4.1.674.10892.1.300.10.1.13,MIB-Dell-10892::chassisIDExtension,INTEGER,read-only,,mandatory,,0300.0010.0001.0013 This attribute defines the system ID extension.
.1.3.6.1.4.1.674.10892.1.300.10.1.14,MIB-Dell-10892::chassisSystemClass,INTEGER,read-only,,mandatory,other(1):unknown(2):workstationClass(3):serverClass(4):desktopClass(5):portableClass(6):netPCClass(7):storageClass(8),0300.0010.0001.0014 This attribute defines the system class.
.1.3.6.1.4.1.674.10892.1.300.10.1.15,MIB-Dell-10892::chassisSystemName,OCTET,read-only,,mandatory,,0300.0010.0001.0015 This attribute defines the host name of the system.
.1.3.6.1.4.1.674.10892.1.300.10.1.16,MIB-Dell-10892::UTC,OCTET,read-only,,mandatory,,0300.0010.0001.0016 This attribute defines boot time of the system. yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.300.10.1.17,MIB-Dell-10892::UTC,OCTET,read-only,,mandatory,,0300.0010.0001.0017 This attribute defines the current time of the system. yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.300.10.1.18,MIB-Dell-10892::chassisSystemLocationName,OCTET,read-only,,mandatory,,0300.0010.0001.0018 This attribute defines the location of the system.
.1.3.6.1.4.1.674.10892.1.300.10.1.19,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0300.0010.0001.0019 This attribute defines the name of the primary user
.1.3.6.1.4.1.674.10892.1.300.10.1.20,MIB-Dell-10892::user,OCTET,read-only,,mandatory,,0300.0010.0001.0020 This attribute defines the phone number of the primary
.1.3.6.1.4.1.674.10892.1.300.10.1.21,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(2):ok(3):failure(4),0300.0010.0001.0021 This attribute defines the status of the connection
.1.3.6.1.4.1.674.10892.1.300.10.1.22,MIB-Dell-10892::fan,INTEGER,read-only,,mandatory,unknown(1):lowSpeedCapable(2):highSpeedCapable(4):lowOrHighSpeedCapable(6),0300.0010.0001.0022 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.23,MIB-Dell-10892::fan,INTEGER,read-only,,mandatory,unknown(1):lowSpeed(2):highSpeed(4),0300.0010.0001.0023 This attribute defines the reading and setting of the
.1.3.6.1.4.1.674.10892.1.300.10.1.24,MIB-Dell-10892::LED,INTEGER,read-only,,mandatory,unknown(1):alertOnErrorCapable(2):alertOnWarningAndErrorCapable(4):alertOnWarningOrErrorCapable(6),0300.0010.0001.0024 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.25,MIB-Dell-10892::LED,INTEGER,read-only,,mandatory,unknown(1):alertOnError(2):alertOnWarningAndError(4),0300.0010.0001.0025 This attribute defines the reading and setting of the
.1.3.6.1.4.1.674.10892.1.300.10.1.26,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):resetCapable(8),0300.0010.0001.0026 This attribute defines if the chassis allows reset
.1.3.6.1.4.1.674.10892.1.300.10.1.27,MIB-Dell-10892::drive,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):reset(8):resetAndEnable(10),0300.0010.0001.0027 This attribute allows reset of a chassis hard disk
.1.3.6.1.4.1.674.10892.1.300.10.1.28,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):identifyCapable(8),0300.0010.0001.0028 This attribute defines if the chassis allows setting
.1.3.6.1.4.1.674.10892.1.300.10.1.29,MIB-Dell-10892::LED,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):identifyChassis(8):identifyChassisAndEnable(10),0300.0010.0001.0029 This attribute setting causes the chassis front panel
.1.3.6.1.4.1.674.10892.1.300.10.1.30,MIB-Dell-10892::chassisLockPresent,INTEGER,read-only,,mandatory,,0300.0010.0001.0030 If true, a chassis lock is present on the chassis.
.1.3.6.1.4.1.674.10892.1.300.10.1.31,MIB-Dell-10892::host,INTEGER,read-only,,mandatory,manualRebootCapable(1):manualPowerOFFCapable(2):manualPowerCycleCapable(4):manualAllExceptOperatingSystemShutdownCapable(7):manualOperatingSystemShutdownCapable(8):manualFullyCapable(15):manualRebootWithOSShutdownCapable(16):manualRebootWithoutOSShutdownCapable(32):manualPowerOffWithOSShutdownCapable(64):manualPowerOffWithoutOSShutdownCapable(128):manualPowerCycleWithOSShutdownCapable(256):manualPowerCycleWithoutOSShutdownCapable(512),0300.0010.0001.031 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.32,MIB-Dell-10892::host,INTEGER,read-only,,mandatory,manualReboot(1):manualPowerOFF(2):manualPowerCycle(4):manualOperatingSystemShutdown(8):manualOperatingSystemShutdownThenReboot(9):manualOperatingSystemShutdownThenPowerOFF(10):manualOperatingSystemShutdownThenPowerCycle(12),0300.0010.0001.0032 This attribute defines the settings of the
.1.3.6.1.4.1.674.10892.1.300.10.1.33,MIB-Dell-10892::watchdog,INTEGER,read-only,,mandatory,automaticRebootCapable(1):automaticPowerCycleCapable(2):automaticNotificationCapable(4):automaticWatchDogTimerCapable(8):automaticPowerOffCapable(16):automaticAllExceptNotificationCapable(27):automaticFullyCapable(31),0300.0010.0001.0033 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.34,MIB-Dell-10892::watchdog,INTEGER,read-only,,mandatory,automaticRebootEnabled(1):automaticPowerCycleEnabled(2):automaticNotificationEnabled(4):automaticPowerOffEnabled(8),0300.0010.0001.0034 This attribute defines the settings of the
.1.3.6.1.4.1.674.10892.1.300.10.1.35,MIB-Dell-10892::watchdog,INTEGER,read-only,,mandatory,type1Capable(1):type2Capable(2):type3Capable(4),0300.0010.0001.0035 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.36,MIB-Dell-10892::value,INTEGER,read-only,,mandatory,,0300.0010.0001.0036 This attribute defines the current watchdog timer
.1.3.6.1.4.1.674.10892.1.300.10.1.37,MIB-Dell-10892::are,INTEGER,read-only,,mandatory,,0300.0010.0001.0037 This attribute defines if SNMP SET type commands
.1.3.6.1.4.1.674.10892.1.300.10.1.38,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2),0300.0010.0001.0038 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.39,MIB-Dell-10892::the,INTEGER,read-only,,mandatory,unknown(1):enabled(2):disabled(4),0300.0010.0001.0039 This attribute defines the reading and setting of
.1.3.6.1.4.1.674.10892.1.300.10.1.40,MIB-Dell-10892::chassisResellerName,OCTET,read-only,,mandatory,,0300.0010.0001.0040 This attribute defines the name of the system reseller.
.1.3.6.1.4.1.674.10892.1.300.10.1.41,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,0300.0010.0001.0041 This attribute defines the contact information
.1.3.6.1.4.1.674.10892.1.300.10.1.42,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,0300.0010.0001.0042 This attribute defines the reseller's product name
.1.3.6.1.4.1.674.10892.1.300.10.1.43,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,,0300.0010.0001.0043 This attribute defines the reseller's system ID
.1.3.6.1.4.1.674.10892.1.300.10.1.44,MIB-Dell-10892::NMI,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2),0300.0010.0001.0044 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.300.10.1.45,MIB-Dell-10892::the,INTEGER,read-only,,mandatory,unknown(1):enabled(2):disabled(4),0300.0010.0001.0045 This attribute defines the reading and setting of
.1.3.6.1.4.1.674.10892.1.300.10.1.46,MIB-Dell-10892::chassisSystemProperties,INTEGER,read-only,,mandatory,energySmart(1),0300.0010.0001.0046 This attribute defines the properties of the system.
.1.3.6.1.4.1.674.10892.1.300.10.1.47,MIB-Dell-10892::is,INTEGER,read-only,,mandatory,,0300.0010.0001.0047 This attribute defines the revision number of the system
.1.3.6.1.4.1.674.10892.1.300.10.1.48,MIB-Dell-10892::if,OCTET,read-only,,mandatory,,0300.0010.0001.0048 This attribute defines the revision name of the system,
.1.3.6.1.4.1.674.10892.1.300.10.1.49,MIB-Dell-10892::chassisExpressServiceCodeName,OCTET,read-only,,mandatory,,0300.0010.0001.0049 This attribute defines the Express Service Code of the
.1.3.6.1.4.1.674.10892.1.300.10.1.50,MIB-Dell-10892::chassis,if,OCTET,read-only,,mandatory,,0300.0010.0001.0050 This attribute defines the NodeID Code of the
.1.3.6.1.4.1.674.10892.1.300.20,MIB-Dell-10892::uUIDTable,,not-accessible,,mandatory,,0300.0020 This object defines the Universal Unique ID (UUID) Table.
.1.3.6.1.4.1.674.10892.1.300.20.1,MIB-Dell-10892::uUIDTableEntry,,not-accessible,uUIDchassisIndex:uUIDIndex,mandatory,,0300.0020.0001 This object defines the UUID Table Entry.
.1.3.6.1.4.1.674.10892.1.300.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0300.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.20.1.2,MIB-Dell-10892::uUIDIndex,INTEGER,read-only,,mandatory,,0300.0020.0001.0002 This attribute defines the index (one based) of the UUID.
.1.3.6.1.4.1.674.10892.1.300.20.1.3,MIB-Dell-10892::uUIDType,INTEGER,read-only,,mandatory,other(1):unknown(2):motherBoard(3):systemBackPlane(4):powerSupplyParallelingBoard(5):peripheralBayBackPlane(6):secondaryBackPlane(7),0300.0020.0001.0003 This attribute defines the type of the UUID.
.1.3.6.1.4.1.674.10892.1.300.20.1.4,MIB-Dell-10892::uUIDValue,OCTET,read-only,,mandatory,,0300.0020.0001.0004 This attribute defines the value of the UUID.
.1.3.6.1.4.1.674.10892.1.300.30,MIB-Dell-10892::postLogTable,,not-accessible,,mandatory,,0300.0030 This object defines the Power On Self Test (POST) Log Table.
.1.3.6.1.4.1.674.10892.1.300.30.1,MIB-Dell-10892::postLogTableEntry,,not-accessible,postLogchassisIndex:postLogRecordIndex,mandatory,,0300.0030.0001 This object defines the POST Log Table Entry.
.1.3.6.1.4.1.674.10892.1.300.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0300.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.30.1.2,MIB-Dell-10892::POST,Gauge32,read-only,,mandatory,,0300.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.30.1.3,MIB-Dell-10892::object,INTEGER,read-only,,mandatory,unknown(1):onlineCapable(2):notReadyCapable(4):resetCapable(8),0300.0030.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.300.30.1.4,MIB-Dell-10892::object,INTEGER,read-only,,mandatory,unknown(1):online(2):notReady(4):reset(8),0300.0030.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.300.30.1.5,MIB-Dell-10892::postLogRecord,OCTET,read-only,,mandatory,,0300.0030.0001.0005 This attribute defines the data of the POST log record.
.1.3.6.1.4.1.674.10892.1.300.30.1.6,MIB-Dell-10892::postLogFormat,INTEGER,read-only,,mandatory,raw(1):ascii(2):uniCode(3),0300.0030.0001.0006 This attribute defines the format of the POST log record.
.1.3.6.1.4.1.674.10892.1.300.40,MIB-Dell-10892::eventLogTable,,not-accessible,,mandatory,,0300.0040 This object defines the Event (ESM) Log Table.
.1.3.6.1.4.1.674.10892.1.300.40.1,MIB-Dell-10892::eventLogTableEntry,,not-accessible,eventLogchassisIndex:eventLogRecordIndex,mandatory,,0300.0040.0001 This object defines the Event (ESM) Log Table Entry.
.1.3.6.1.4.1.674.10892.1.300.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0300.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.40.1.2,MIB-Dell-10892::event,Gauge32,read-only,,mandatory,,0300.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.40.1.3,MIB-Dell-10892::object,INTEGER,read-only,,mandatory,unknown(1):onlineCapable(2):notReadyCapable(4):resetCapable(8),0300.0040.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.300.40.1.4,MIB-Dell-10892::object,INTEGER,read-only,,mandatory,unknown(1):online(2):notReady(4):reset(8),0300.0040.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.300.40.1.5,MIB-Dell-10892::eventLogRecord,OCTET,read-only,,mandatory,,0300.0040.0001.0005 This attribute defines the data of the event log record.
.1.3.6.1.4.1.674.10892.1.300.40.1.6,MIB-Dell-10892::eventLogFormat,INTEGER,read-only,,mandatory,raw(1):ascii(2):uniCode(3),0300.0040.0001.0006 This attribute defines the format of the event log record.
.1.3.6.1.4.1.674.10892.1.300.40.1.7,MIB-Dell-10892::event,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0300.0040.0001.0007 This attribute defines the severity of the
.1.3.6.1.4.1.674.10892.1.300.40.1.8,MIB-Dell-10892::event,OCTET,read-only,,mandatory,,0300.0040.0001.0008 This attribute defines the date and time of the
.1.3.6.1.4.1.674.10892.1.300.50,MIB-Dell-10892::systemBIOSTable,,not-accessible,,mandatory,,0300.0050 This object defines the System BIOS Table.
.1.3.6.1.4.1.674.10892.1.300.50.1,MIB-Dell-10892::systemBIOSTableEntry,,not-accessible,systemBIOSchassisIndex:systemBIOSIndex,mandatory,,0300.0050.0001 This object defines the System BIOS Table Entry.
.1.3.6.1.4.1.674.10892.1.300.50.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0300.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.50.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0300.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.50.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0050.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.300.50.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0050.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.300.50.1.5,MIB-Dell-10892::systemBIOSStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0300.0050.0001.0005 This attribute defines the status of the system BIOS.
.1.3.6.1.4.1.674.10892.1.300.50.1.6,MIB-Dell-10892::system,Gauge32,read-only,,mandatory,,0300.0050.0001.0006 This attribute defines the image size of the
.1.3.6.1.4.1.674.10892.1.300.50.1.7,MIB-Dell-10892::system,OCTET,read-only,,mandatory,,0300.0050.0001.0007 This attribute defines the release date name of the
.1.3.6.1.4.1.674.10892.1.300.50.1.8,MIB-Dell-10892::system,OCTET,read-only,,mandatory,,0300.0050.0001.0008 This attribute defines the version name of the
.1.3.6.1.4.1.674.10892.1.300.50.1.9,MIB-Dell-10892::system,OCTET,read-only,,mandatory,,0300.0050.0001.0009 This attribute defines the starting address of the
.1.3.6.1.4.1.674.10892.1.300.50.1.10,MIB-Dell-10892::system,OCTET,read-only,,mandatory,,0300.0050.0001.0010 This attribute defines the ending address of the
.1.3.6.1.4.1.674.10892.1.300.50.1.11,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0300.0050.0001.0011 This attribute defines the name of the manufacturer
.1.3.6.1.4.1.674.10892.1.300.50.1.12,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,0300.0050.0001.0012 This attribute defines characteristics of the Bit Position Meaning if Set -------- -------------- Bit 0 Reserved Bit 1 Reserved Bit 2 Unknown Bit 3 BIOS Characteristics Not Supported Bit 4 ISA is supported Bit 5 MCA is supported Bit 6 EISA is supported Bit 7 PCI is supported Bit 8 PC Card (PCMCIA) is supported Bit 9 Plug and Play is supported Bit 10 APM is supported Bit 11 BIOS is Upgradeable (Flash) Bit 12 BIOS shadowing is allowed Bit 13 VL-VESA is supported Bit 14 ESCD support is available Bit 15 Boot from CD is supported Bit 16 Selectable Boot is supported Bit 17 BIOS ROM is socketed Bit 18 Boot From PC Card (PCMCIA) is supported Bit 19 EDD (Enhanced Disk Drive) Specification is supported Bit 20 Int 13h - Japanese Floppy for NEC 9800 1.2mb (3.5 in, 1k Bytes/Sector, 360 RPM) is supported Bit 21 Int 13h - Japanese Floppy for Toshiba 1.2mb (3.5 in, 360 RPM) is supported Bit 22 Int 13h - 5.25 in / 360 KB Floppy Services are supported Bit 23 Int 13h - 5.25 in /1.2MB Floppy Services are supported Bit 24 Int 13h - 3.5 in / 720 KB Floppy Services are supported Bit 25 Int 13h - 3.5 in / 2.88 MB Floppy Services are supported Bit 26 Int 5h, Print Screen Service is supported Bit 27 Int 9h, 8042 Keyboard services are supported Bit 28 Int 14h, Serial Services are supported Bit 29 Int 17h, Printer Services are supported Bit 30 Int 10h, CGA/Mono Video Services are supported Bit 31 NEC PC-98 Bit 32-47 Reserved Bit 48 Built-in NIC supports Magic Packet Bit 49 System supports Wake-on-LAN Bit 50 System supports chassis intrusion Bit 51 Built-in NIC supports pattern-matching Bit 52 System BIOS supports a 7-character service tag Bit 53-63 Reserved
.1.3.6.1.4.1.674.10892.1.300.50.1.13,MIB-Dell-10892::defined,INTEGER,read-only,,mandatory,,0300.0050.0001.0013 This attribute defines additional characteristics of the Bit Position Meaning if Set -------- -------------- Bit 0 ACPI supported Bit 1 USB Legacy is supported Bit 2 AGP is supported Bit 3 I2O boot is supported Bit 4 LS-120 boot is supported Bit 5 ATAPI ZIP Drive boot is supported Bit 6 1394 boot is supported Bit 7 Smart Battery supported
.1.3.6.1.4.1.674.10892.1.300.50.1.14,MIB-Dell-10892::defined,INTEGER,read-only,,mandatory,,0300.0050.0001.0014 This attribute defines additional characteristics of the Bit Position Meaning if Set -------- -------------- Bit 0 BIOS Boot Specification supported Bit 1 Function key-initiated Network Service boot supported Bit 2 Targeted Content Distribution supported Bit 3-7 Reserved
.1.3.6.1.4.1.674.10892.1.300.60,MIB-Dell-10892::firmwareTable,,not-accessible,,mandatory,,0300.0060 This object defines the Firmware Table.
.1.3.6.1.4.1.674.10892.1.300.60.1,MIB-Dell-10892::firmwareTableEntry,,not-accessible,firmwarechassisIndex:firmwareIndex,mandatory,,0300.0060.0001 This object defines the Firmware Table Entry.
.1.3.6.1.4.1.674.10892.1.300.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0300.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.60.1.2,MIB-Dell-10892::firmwareIndex,INTEGER,read-only,,mandatory,,0300.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.60.1.3,MIB-Dell-10892::firmwareStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0060.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.300.60.1.4,MIB-Dell-10892::firmwareStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0060.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.300.60.1.5,MIB-Dell-10892::firmwareStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0300.0060.0001.0005 This attribute defines the status of the firmware.
.1.3.6.1.4.1.674.10892.1.300.60.1.6,MIB-Dell-10892::in,INTEGER,read-only,,mandatory,,0300.0060.0001.0006 This attribute defines the image size of the firmware
.1.3.6.1.4.1.674.10892.1.300.60.1.7,MIB-Dell-10892::firmwareType,INTEGER,read-only,,mandatory,other(1):unknown(2):systemBIOS(3):embeddedSystemManagementController(4):powerSupplyParallelingBoard(5):systemBackPlane(6):powerVault2XXSKernel(7):powerVault2XXSApplication(8):frontPanel(9):baseboardManagementController(10):hotPlugPCI(11):sensorData(12):peripheralBay(13):secondaryBackPlane(14):secondaryBackPlaneESM3And4(15):rac(16):iDRAC(17):iDRAC6(18):unifiedServerConfigurator(19):lifecycleController(20):iDRAC7(21):iDRAC8(22):iDRAC9(23),0300.0060.0001.0007 This attribute defines the type of firmware.
.1.3.6.1.4.1.674.10892.1.300.60.1.8,MIB-Dell-10892::firmwareTypeName,OCTET,read-only,,mandatory,,0300.0060.0001.0008 This attribute defines the type name of the firmware.
.1.3.6.1.4.1.674.10892.1.300.60.1.9,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,,0300.0060.0001.0009 This attribute defines the bitmap of supported methods
.1.3.6.1.4.1.674.10892.1.300.60.1.10,MIB-Dell-10892::firmwareDateName,OCTET,read-only,,mandatory,,0300.0060.0001.0010 This attribute defines the release date of the firmware.
.1.3.6.1.4.1.674.10892.1.300.60.1.11,MIB-Dell-10892::firmwareVersionName,OCTET,read-only,,mandatory,,0300.0060.0001.0011 This attribute defines the version of the firmware.
.1.3.6.1.4.1.674.10892.1.300.70,MIB-Dell-10892::intrusionTable,,not-accessible,,mandatory,,0300.0070 This object defines the Intrusion Table.
.1.3.6.1.4.1.674.10892.1.300.70.1,MIB-Dell-10892::intrusionTableEntry,,not-accessible,intrusionchassisIndex:intrusionIndex,mandatory,,0300.0070.0001 This object defines the Intrusion Table Entry.
.1.3.6.1.4.1.674.10892.1.300.70.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0300.0070.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.70.1.2,MIB-Dell-10892::intrusion,INTEGER,read-only,,mandatory,,0300.0070.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.70.1.3,MIB-Dell-10892::intrusion,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0070.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.300.70.1.4,MIB-Dell-10892::intrusion,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0070.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.300.70.1.5,MIB-Dell-10892::intrusion,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0300.0070.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.300.70.1.6,MIB-Dell-10892::intrusion,INTEGER,read-only,,mandatory,chassisNotBreached(1):chassisBreached(2):chassisBreachedPrior(3):chassisBreachSensorFailure(4):driveBayOpen(5):driveBayOpenExtended(6),0300.0070.0001.0006 This attribute defines the reading of the
.1.3.6.1.4.1.674.10892.1.300.70.1.7,MIB-Dell-10892::intrusion,INTEGER,read-only,,mandatory,chassisBreachDetectionWhenPowerON(1):chassisBreachDetectionWhenPowerOFF(2),0300.0070.0001.0007 This attribute defines the type of the
.1.3.6.1.4.1.674.10892.1.300.70.1.8,MIB-Dell-10892::intrusion,OCTET,read-only,,mandatory,,0300.0070.0001.0008 This attribute defines the location of the
.1.3.6.1.4.1.674.10892.1.300.80,MIB-Dell-10892::baseBoardTable,,not-accessible,,mandatory,,0300.0080 This object defines the Base Board Table.
.1.3.6.1.4.1.674.10892.1.300.80.1,MIB-Dell-10892::baseBoardTableEntry,,not-accessible,baseBoardChassisIndex:baseBoardIndex,mandatory,,0300.0080.0001 This object defines the Base Board Table Entry.
.1.3.6.1.4.1.674.10892.1.300.80.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0300.0080.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.80.1.2,MIB-Dell-10892::base,INTEGER,read-only,,mandatory,,0300.0080.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.300.80.1.3,MIB-Dell-10892::base,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0080.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.300.80.1.4,MIB-Dell-10892::base,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0080.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.300.80.1.5,MIB-Dell-10892::baseBoardStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0300.0080.0001.0005 This attribute defines the status of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.6,MIB-Dell-10892::baseBoardFeatureFlags,INTEGER,read-only,,mandatory,boardIsHostingBoard(1):boardRequiresDaughterBoard(2):boardIsRemovable(4):boardIsReplaceable(8):boardIsHotSwappable(16),0300.0080.0001.0006 This attribute defines the features of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.7,MIB-Dell-10892::baseBoardType,INTEGER,read-only,,mandatory,unknown(1):other(2):serverBlade(3):connectivitySwitch(4):systemManagementModule(5):processorModule(6):ioModule(7):memoryModule(8):daughterBoard(9):motherboard(10):processorMemoryModule(11):processorIOModule(12):interconnectBoard(13),0300.0080.0001.0007 This attribute defines the type of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.8,MIB-Dell-10892::baseBoardTypeName,OCTET,read-only,,mandatory,,0300.0080.0001.0008 This attribute defines the type name of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.9,MIB-Dell-10892::baseBoardLocationName,OCTET,read-only,,mandatory,,0300.0080.0001.0009 This attribute defines the location of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.10,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0300.0080.0001.0010 This attribute defines the name of the manufacturer
.1.3.6.1.4.1.674.10892.1.300.80.1.11,MIB-Dell-10892::base,OCTET,read-only,,mandatory,,0300.0080.0001.0011 This attribute defines the product name of the
.1.3.6.1.4.1.674.10892.1.300.80.1.12,MIB-Dell-10892::baseBoardVersionName,OCTET,read-only,,mandatory,,0300.0080.0001.0012 This attribute defines the version of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.13,MIB-Dell-10892::baseBoardServiceTagName,OCTET,read-only,,mandatory,,0300.0080.0001.0013 This attribute defines the service tag of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.14,MIB-Dell-10892::base,OCTET,read-only,,mandatory,,0300.0080.0001.0014 This attribute defines the Piece Part ID (PPID) of the
.1.3.6.1.4.1.674.10892.1.300.80.1.15,MIB-Dell-10892::baseBoardAssetTagName,OCTET,read-only,,mandatory,,0300.0080.0001.0015 This attribute defines the asset tag of the base board.
.1.3.6.1.4.1.674.10892.1.300.80.1.16,MIB-Dell-10892::base,OCTET,read-only,,mandatory,,0300.0080.0001.0016 This attribute defines the Express Service Code of the
.1.3.6.1.4.1.674.10892.1.400,MIB-Dell-10892::operatingSystemGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.400.10,MIB-Dell-10892::operatingSystemTable,,not-accessible,,mandatory,,0400.0010 This object defines the Operating System Table.
.1.3.6.1.4.1.674.10892.1.400.10.1,MIB-Dell-10892::operatingSystemTableEntry,,not-accessible,operatingSystemchassisIndex,mandatory,,0400.0010.0001 This object defines the Operating System Table Entry.
.1.3.6.1.4.1.674.10892.1.400.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0400.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.400.10.1.2,MIB-Dell-10892::operating,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0400.0010.0001.0002 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.400.10.1.3,MIB-Dell-10892::operating,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0400.0010.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.400.10.1.4,MIB-Dell-10892::operating,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0400.0010.0001.0004 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.400.10.1.5,MIB-Dell-10892::primary,INTEGER,read-only,,mandatory,,0400.0010.0001.0005 This attribute defines if this operating system is the
.1.3.6.1.4.1.674.10892.1.400.10.1.6,MIB-Dell-10892::operatingSystemOperatingSystemName,OCTET,read-only,,mandatory,,0400.0010.0001.0006 This attribute defines the name of the operating system.
.1.3.6.1.4.1.674.10892.1.400.10.1.7,MIB-Dell-10892::operatingSystemOperatingSystemVersionName,OCTET,read-only,,mandatory,,0400.0010.0001.0007 This attribute defines the version of the operating system.
.1.3.6.1.4.1.674.10892.1.400.20,MIB-Dell-10892::operatingSystemMemoryTable,,not-accessible,,mandatory,,0400.0020 This object defines the Operating System Memory Table.
.1.3.6.1.4.1.674.10892.1.400.20.1,MIB-Dell-10892::operatingSystemMemoryTableEntry,,not-accessible,operatingSystemMemorychassisIndex,mandatory,,0400.0020.0001 This object defines the Operating System Memory Table Entry.
.1.3.6.1.4.1.674.10892.1.400.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0400.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.400.20.1.2,MIB-Dell-10892::operating,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0400.0020.0001.0002 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.400.20.1.3,MIB-Dell-10892::operating,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0400.0020.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.400.20.1.4,MIB-Dell-10892::operating,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0400.0020.0001.0004 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.400.20.1.5,MIB-Dell-10892::**NOTE:,Gauge32,read-only,,deprecated,,0400.0020.0001.0005 This attribute defines the total physical memory
.1.3.6.1.4.1.674.10892.1.400.20.1.6,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,0400.0020.0001.0006 This attribute defines the available physical memory
.1.3.6.1.4.1.674.10892.1.400.20.1.7,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,0400.0020.0001.0007 This attribute defines the total page file memory
.1.3.6.1.4.1.674.10892.1.400.20.1.8,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,0400.0020.0001.0008 This attribute defines the available page file memory
.1.3.6.1.4.1.674.10892.1.400.20.1.9,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,0400.0020.0001.0009 This attribute defines the total virtual memory
.1.3.6.1.4.1.674.10892.1.400.20.1.10,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,0400.0020.0001.0010 This attribute defines the available virtual memory
.1.3.6.1.4.1.674.10892.1.400.20.1.11,MIB-Dell-10892::**NOTE:,OCTET,read-only,,mandatory,,0400.0020.0001.0011 This attribute defines the total physical memory
.1.3.6.1.4.1.674.10892.1.500,MIB-Dell-10892::systemResourceGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.500.10,MIB-Dell-10892::systemResourceMapTable,,not-accessible,,mandatory,,0500.0010 This object defines the System Resource Map Table.
.1.3.6.1.4.1.674.10892.1.500.10.1,MIB-Dell-10892::systemResourceMapTableEntry,,not-accessible,systemResourceMapchassisIndex:systemResourceMapIndex,mandatory,,0500.0010.0001 This object defines the System Resource Map Table Entry.
.1.3.6.1.4.1.674.10892.1.500.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0500.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.10.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.10.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0500.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.500.10.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0500.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.500.10.1.5,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0500.0010.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.500.10.1.6,MIB-Dell-10892::systemResourceMapType,INTEGER,read-only,,mandatory,other(1):unknown(2):typeOne(3),0500.0010.0001.0006 This attribute defines the type of the system resource map.
.1.3.6.1.4.1.674.10892.1.500.20,MIB-Dell-10892::systemResourceOwnerTable,,not-accessible,,mandatory,,0500.0020 This object defines the System Resource Owner Table.
.1.3.6.1.4.1.674.10892.1.500.20.1,MIB-Dell-10892::systemResourceOwnerTableEntry,,not-accessible,systemResourceOwnerchassisIndex:systemResourceOwnerIndex,mandatory,,0500.0020.0001 This object defines the System Resource Owner Table Entry.
.1.3.6.1.4.1.674.10892.1.500.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0500.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.20.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0020.0001.0002 This attribute defines the index of (one based) of the
.1.3.6.1.4.1.674.10892.1.500.20.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0500.0020.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.500.20.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0500.0020.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.500.20.1.5,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0500.0020.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.500.20.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,typeIsOther(1):typeIsUnknown(2):typeIsInternal(3):typeIsISA(4):typeIsEISA(5):typeIsMCA(6):typeIsTurboChannel(7):typeIsPCI(8),0500.0020.0001.0006 This attribute defines the interface type of the
.1.3.6.1.4.1.674.10892.1.500.20.1.7,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0020.0001.0007 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.500.20.1.8,MIB-Dell-10892::system,OCTET,read-only,,mandatory,,0500.0020.0001.0008 This attribute defines the description of the
.1.3.6.1.4.1.674.10892.1.500.20.1.9,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0020.0001.0009 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.500.30,MIB-Dell-10892::systemResourceIOPortTable,,not-accessible,,mandatory,,0500.0030 This object defines the System Resource I/O Port Table.
.1.3.6.1.4.1.674.10892.1.500.30.1,MIB-Dell-10892::systemResourceIOPortTableEntry,,not-accessible,systemResourceIOPortchassisIndex:systemResourceIOPortIndex,mandatory,,0500.0030.0001 This object defines the System Resource I/O Port Table Entry.
.1.3.6.1.4.1.674.10892.1.500.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0500.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.30.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.30.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0500.0030.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.500.30.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0500.0030.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.500.30.1.5,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0500.0030.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.500.30.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0030.0001.0006 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.500.30.1.7,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,shareIsOther(1):shareIsUnknown(2):shareIsDeviceExclusive(3):shareIsDriverExclusive(4):shareIsShared(5),0500.0030.0001.0007 This attribute defines the share disposition of the
.1.3.6.1.4.1.674.10892.1.500.30.1.8,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0500.0030.0001.0008 This attribute defines the 64-bit starting address
.1.3.6.1.4.1.674.10892.1.500.30.1.9,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0500.0030.0001.0009 This attribute defines the 64-bit ending address
.1.3.6.1.4.1.674.10892.1.500.40,MIB-Dell-10892::systemResourceMemoryTable,,not-accessible,,mandatory,,0500.0040 This object defines the System Resource Memory Table.
.1.3.6.1.4.1.674.10892.1.500.40.1,MIB-Dell-10892::systemResourceMemoryTableEntry,,not-accessible,systemResourceMemorychassisIndex:systemResourceMemoryIndex,mandatory,,0500.0040.0001 This object defines the System Resource Memory Table Entry.
.1.3.6.1.4.1.674.10892.1.500.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0500.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.40.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.40.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0500.0040.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.500.40.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0500.0040.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.500.40.1.5,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0500.0040.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.500.40.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0040.0001.0006 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.500.40.1.7,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,shareIsOther(1):shareIsUnknown(2):shareIsDeviceExclusive(3):shareIsDriverExclusive(4):shareIsShared(5),0500.0040.0001.0007 This attribute defines the share disposition of the
.1.3.6.1.4.1.674.10892.1.500.40.1.8,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0500.0040.0001.0008 This attribute defines the 64-bit starting address
.1.3.6.1.4.1.674.10892.1.500.40.1.9,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,0500.0040.0001.0009 This attribute defines the 64-bit ending address
.1.3.6.1.4.1.674.10892.1.500.40.1.10,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,memoryIsReadOnly(1):memoryIsWriteOnly(2):memoryIsReadAndWrite(3):memoryIsPreFetchable(4):memoryIsCombinedWritable(8):memoryIsF24(16),0500.0040.0001.0010 This attribute defines the permission flags of the
.1.3.6.1.4.1.674.10892.1.500.50,MIB-Dell-10892::systemResourceInterruptTable,,not-accessible,,mandatory,,0500.0050 This object defines the System Resource Interrupts Table.
.1.3.6.1.4.1.674.10892.1.500.50.1,MIB-Dell-10892::systemResourceInterruptTableEntry,,not-accessible,systemResourceInterruptchassisIndex:systemResourceInterruptIndex,mandatory,,0500.0050.0001 This object defines the System Resource Interrupts Table Entry.
.1.3.6.1.4.1.674.10892.1.500.50.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0500.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.50.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.50.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0500.0050.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.500.50.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0500.0050.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.500.50.1.5,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0500.0050.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.500.50.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0050.0001.0006 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.500.50.1.7,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,shareIsOther(1):shareIsUnknown(2):shareIsDeviceExclusive(3):shareIsDriverExclusive(4):shareIsShared(5),0500.0050.0001.0007 This attribute defines the share disposition of the
.1.3.6.1.4.1.674.10892.1.500.50.1.8,MIB-Dell-10892::of,Gauge32,read-only,,mandatory,,0500.0050.0001.0008 This attribute defines the interrupt request level (IRQ)
.1.3.6.1.4.1.674.10892.1.500.50.1.9,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,interruptIsLevelSensitive(1):interruptIsLatched(2),0500.0050.0001.0009 This attribute defines the interrupt type of the
.1.3.6.1.4.1.674.10892.1.500.50.1.10,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,interruptIsActiveWhenLow(1):interruptIsActiveWhenHigh(2),0500.0050.0001.0010 This attribute defines the interrupt trigger of the
.1.3.6.1.4.1.674.10892.1.500.60,MIB-Dell-10892::systemResourceDMATable,,not-accessible,,mandatory,,0500.0060 This object defines the System Resource DMA Table.
.1.3.6.1.4.1.674.10892.1.500.60.1,MIB-Dell-10892::systemResourceDMATableEntry,,not-accessible,systemResourceDMAchassisIndex:systemResourceDMAIndex,mandatory,,0500.0060.0001 This object defines the System Resource DMA Table Entry.
.1.3.6.1.4.1.674.10892.1.500.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0500.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.60.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.500.60.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0500.0060.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.500.60.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0500.0060.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.500.60.1.5,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0500.0060.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.500.60.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,0500.0060.0001.0006 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.500.60.1.7,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,shareIsOther(1):shareIsUnknown(2):shareIsDeviceExclusive(3):shareIsDriverExclusive(4):shareIsShared(5),0500.0060.0001.0007 This attribute defines the share disposition of the
.1.3.6.1.4.1.674.10892.1.500.60.1.8,MIB-Dell-10892::transfer,Gauge32,read-only,,mandatory,,0500.0060.0001.0008 This attribute defines the maximum size of a memory
.1.3.6.1.4.1.674.10892.1.500.60.1.9,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,dmaTransferWidthIsOther(1):dmaTransferWidthIsunknown(2):dmaTransferWidthIs8Bits(3):dmaTransferWidthIs16Bits(4):dmaTransferWidthIs32Bits(5):dmaTransferWidthIs64Bits(6):dmaTransferWidthIs128Bits(7),0500.0060.0001.0009 This attribute defines the tranfer width of the
.1.3.6.1.4.1.674.10892.1.500.60.1.10,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,dmaIsOther(1):dmaIsUnknown(2):dmaIsNotABusmaster(3):dmaIsABusmaster(4),0500.0060.0001.0010 This attribute defines the bus master capabilities
.1.3.6.1.4.1.674.10892.1.600,MIB-Dell-10892::powerGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.600.10,MIB-Dell-10892::powerUnitTable,,not-accessible,,mandatory,,0600.0010 This object defines the Power Unit Table.
.1.3.6.1.4.1.674.10892.1.600.10.1,MIB-Dell-10892::powerUnitTableEntry,,not-accessible,powerUnitchassisIndex:powerUnitIndex,mandatory,,0600.0010.0001 This object defines the Power Unit Table Entry.
.1.3.6.1.4.1.674.10892.1.600.10.1.1,MIB-Dell-10892::powerUnitchassisIndex,INTEGER,read-only,,mandatory,,0600.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.10.1.2,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,,0600.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.10.1.3,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.600.10.1.4,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.600.10.1.5,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0600.0010.0001.0005 This attribute defines the redundancy status of the
.1.3.6.1.4.1.674.10892.1.600.10.1.6,MIB-Dell-10892::required,INTEGER,read-only,,mandatory,,0600.0010.0001.0006 This attribute defines the total number of power supplies
.1.3.6.1.4.1.674.10892.1.600.10.1.7,MIB-Dell-10892::powerUnitName,OCTET,read-only,,mandatory,,0600.0010.0001.0007 This attribute defines the name of the power unit.
.1.3.6.1.4.1.674.10892.1.600.10.1.8,MIB-Dell-10892::powerUnitStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0600.0010.0001.0008 This attribute defines the status of the power unit.
.1.3.6.1.4.1.674.10892.1.600.12,MIB-Dell-10892::powerSupplyTable,,not-accessible,,mandatory,,0600.0012 This object defines the Power Supply Table.
.1.3.6.1.4.1.674.10892.1.600.12.1,MIB-Dell-10892::powerSupplyTableEntry,,not-accessible,powerSupplychassisIndex:powerSupplyIndex,mandatory,,0600.0012.0001 This object defines the Power Supply Table Entry.
.1.3.6.1.4.1.674.10892.1.600.12.1.1,MIB-Dell-10892::powerSupplychassisIndex,INTEGER,read-only,,mandatory,,0600.0012.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.12.1.2,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,,0600.0012.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.12.1.3,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,unknown(1):onlineCapable(2):notReadyCapable(4),0600.0012.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.600.12.1.4,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,unknown(1):onLine(2):notReady(4):fanFailure(8):onlineAndFanFailure(10):powerSupplyIsON(16):powerSupplyIsOK(32):acSwitchIsON(64):onlineandAcSwitchIsON(66):acPowerIsON(128):onlineAndAcPowerIsON(130):onlineAndPredictiveFailure(210):acPowerAndSwitchAreOnPowerSupplyIsOnIsOkAndOnline(242),0600.0012.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.600.12.1.5,MIB-Dell-10892::powerSupplyStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0600.0012.0001.0005 This attribute defines the status of the power supply.
.1.3.6.1.4.1.674.10892.1.600.12.1.6,MIB-Dell-10892::wattage,INTEGER,read-only,,mandatory,,0600.0012.0001.0006 This attribute defines the maximum sustained output
.1.3.6.1.4.1.674.10892.1.600.12.1.7,MIB-Dell-10892::powerSupplyType,INTEGER,read-only,,mandatory,powerSupplyTypeIsOther(1):powerSupplyTypeIsUnknown(2):powerSupplyTypeIsLinear(3):powerSupplyTypeIsSwitching(4):powerSupplyTypeIsBattery(5):powerSupplyTypeIsUPS(6):powerSupplyTypeIsConverter(7):powerSupplyTypeIsRegulator(8):powerSupplyTypeIsAC(9):powerSupplyTypeIsDC(10):powerSupplyTypeIsVRM(11),0600.0012.0001.0007 This attribute defines the type of the power supply.
.1.3.6.1.4.1.674.10892.1.600.12.1.8,MIB-Dell-10892::powerSupplyLocationName,OCTET,read-only,,mandatory,,0600.0012.0001.0008 This attribute defines the location of the power supply.
.1.3.6.1.4.1.674.10892.1.600.12.1.9,MIB-Dell-10892::supply,INTEGER,read-only,,mandatory,,0600.0012.0001.0009 This attribute defines the input voltage to the power
.1.3.6.1.4.1.674.10892.1.600.12.1.10,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,,0600.0012.0001.0010 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.600.12.1.11,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,presenceDetected(1):psFailureDetected(2):predictiveFailure(4):psACLost(8):acLostOrOutOfRange(16):acOutOfRangeButPresent(32):configurationError(64),0600.0012.0001.0011 This attribute defines the state reported by the
.1.3.6.1.4.1.674.10892.1.600.12.1.12,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,vendorMismatch(1):revisionMismatch(2):processorMissing(3),0600.0012.0001.0012 This attribute defines the type of configuration error
.1.3.6.1.4.1.674.10892.1.600.12.1.13,MIB-Dell-10892::whether,INTEGER,read-only,,mandatory,,0600.0012.0001.0013 This attribute defines a boolean value that reports
.1.3.6.1.4.1.674.10892.1.600.12.1.14,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,,0600.0012.0001.0014 This attribute defines the rated input wattage of the
.1.3.6.1.4.1.674.10892.1.600.20,MIB-Dell-10892::voltageProbeTable,,not-accessible,,mandatory,,0600.0020 This object defines the Voltage Probe Table.
.1.3.6.1.4.1.674.10892.1.600.20.1,MIB-Dell-10892::voltageProbeTableEntry,,not-accessible,voltageProbechassisIndex:voltageProbeIndex,mandatory,,0600.0020.001 This object defines the Voltage Probe Table Entry.
.1.3.6.1.4.1.674.10892.1.600.20.1.1,MIB-Dell-10892::voltageProbechassisIndex,INTEGER,read-only,,mandatory,,0600.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.20.1.2,MIB-Dell-10892::voltage,INTEGER,read-only,,mandatory,,0600.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.20.1.3,MIB-Dell-10892::voltage,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0020.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.600.20.1.4,MIB-Dell-10892::voltage,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0020.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.600.20.1.5,MIB-Dell-10892::voltage,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0600.0020.0001.0005 This attribute defines the probe status of the
.1.3.6.1.4.1.674.10892.1.600.20.1.6,MIB-Dell-10892::voltageProbeTypeIsDiscrete,,INTEGER,read-only,,mandatory,,0600.0020.0001.0006 This attribute defines the reading for a voltage
.1.3.6.1.4.1.674.10892.1.600.20.1.7,MIB-Dell-10892::voltageProbeType,INTEGER,read-only,,mandatory,voltageProbeTypeIsOther(1):voltageProbeTypeIsUnknown(2):voltageProbeTypeIs1Point5Volt(3):voltageProbeTypeIs3Point3Volt(4):voltageProbeTypeIs5Volt(5):voltageProbeTypeIsMinus5Volt(6):voltageProbeTypeIs12Volt(7):voltageProbeTypeIsMinus12Volt(8):voltageProbeTypeIsIO(9):voltageProbeTypeIsCore(10):voltageProbeTypeIsFLEA(11):voltageProbeTypeIsBattery(12):voltageProbeTypeIsTerminator(13):voltageProbeTypeIs2Point5Volt(14):voltageProbeTypeIsGTL(15):voltageProbeTypeIsDiscrete(16),0600.0020.0001.0007 This attribute defines the type of the voltage probe.
.1.3.6.1.4.1.674.10892.1.600.20.1.8,MIB-Dell-10892::voltage,OCTET,read-only,,mandatory,,0600.0020.0001.0008 This attribute defines the location name of the
.1.3.6.1.4.1.674.10892.1.600.20.1.9,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0020.0001.0009 This attribute defines the upper nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.600.20.1.10,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0020.0001.0010 This attribute defines the upper critical threshold
.1.3.6.1.4.1.674.10892.1.600.20.1.11,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0020.0001.0011 This attribute defines the upper noncritical threshold
.1.3.6.1.4.1.674.10892.1.600.20.1.12,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0020.0001.0012 This attribute defines the lower noncritical threshold
.1.3.6.1.4.1.674.10892.1.600.20.1.13,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0020.0001.0013 This attribute defines the lower critical threshold
.1.3.6.1.4.1.674.10892.1.600.20.1.14,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0020.0001.0014 This attribute defines the lower nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.600.20.1.15,MIB-Dell-10892::voltage,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0600.0020.0001.0015 This attribute defines the probe capabilities of the
.1.3.6.1.4.1.674.10892.1.600.20.1.16,MIB-Dell-10892::the,INTEGER,read-only,,mandatory,voltageIsGood(1):voltageIsBad(2),0600.0020.0001.0016 This attribute defines the reading for a voltage
.1.3.6.1.4.1.674.10892.1.600.30,MIB-Dell-10892::amperageProbeTable,,not-accessible,,mandatory,,0600.0030 This object defines the Amperage Probe Table.
.1.3.6.1.4.1.674.10892.1.600.30.1,MIB-Dell-10892::amperageProbeTableEntry,,not-accessible,amperageProbechassisIndex:amperageProbeIndex,mandatory,,0600.0030.0001 This object defines the Amperage Probe Table Entry.
.1.3.6.1.4.1.674.10892.1.600.30.1.1,MIB-Dell-10892::amperageProbechassisIndex,INTEGER,read-only,,mandatory,,0600.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.30.1.2,MIB-Dell-10892::amperage,INTEGER,read-only,,mandatory,,0600.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.30.1.3,MIB-Dell-10892::amperage,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0030.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.600.30.1.4,MIB-Dell-10892::amperage,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0030.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.600.30.1.5,MIB-Dell-10892::amperage,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0600.0030.0001.0005 This attribute defines the probe status of the
.1.3.6.1.4.1.674.10892.1.600.30.1.6,MIB-Dell-10892::a,INTEGER,read-only,,mandatory,,0600.0030.0001.0006 This attribute defines the reading for an amperage
.1.3.6.1.4.1.674.10892.1.600.30.1.7,MIB-Dell-10892::amperageProbeType,INTEGER,read-only,,mandatory,amperageProbeTypeIsOther(1):amperageProbeTypeIsUnknown(2):amperageProbeTypeIs1Point5Volt(3):amperageProbeTypeIs3Point3volt(4):amperageProbeTypeIs5Volt(5):amperageProbeTypeIsMinus5Volt(6):amperageProbeTypeIs12Volt(7):amperageProbeTypeIsMinus12Volt(8):amperageProbeTypeIsIO(9):amperageProbeTypeIsCore(10):amperageProbeTypeIsFLEA(11):amperageProbeTypeIsBattery(12):amperageProbeTypeIsTerminator(13):amperageProbeTypeIs2Point5Volt(14):amperageProbeTypeIsGTL(15):amperageProbeTypeIsDiscrete(16):amperageProbeTypeIsPowerSupplyAmps(23):amperageProbeTypeIsPowerSupplyWatts(24):amperageProbeTypeIsSystemAmps(25):amperageProbeTypeIsSystemWatts(26),0600.0030.0001.0007 This attribute defines the type of the amperage probe.
.1.3.6.1.4.1.674.10892.1.600.30.1.8,MIB-Dell-10892::amperageProbeLocationName,OCTET,read-only,,mandatory,,0600.0030.0001.0008 This attribute defines the location of the amperage probe.
.1.3.6.1.4.1.674.10892.1.600.30.1.9,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0030.0001.0009 This attribute defines the upper nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.600.30.1.10,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0030.0001.0010 This attribute defines the upper critical threshold
.1.3.6.1.4.1.674.10892.1.600.30.1.11,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0030.0001.0011 This attribute defines the upper noncritical threshold
.1.3.6.1.4.1.674.10892.1.600.30.1.12,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0030.0001.0012 This attribute defines the lower noncritical threshold
.1.3.6.1.4.1.674.10892.1.600.30.1.13,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0030.0001.0013 This attribute defines the lower critical threshold
.1.3.6.1.4.1.674.10892.1.600.30.1.14,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0600.0030.0001.0014 This attribute defines the lower nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.600.30.1.15,MIB-Dell-10892::amperage,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0600.0030.0001.0015 This attribute defines the probe capabilities of the
.1.3.6.1.4.1.674.10892.1.600.30.1.16,MIB-Dell-10892::the,INTEGER,read-only,,mandatory,amperageIsGood(1):amperageIsBad(2),0600.0030.0001.0016 This attribute defines the reading for an amperage
.1.3.6.1.4.1.674.10892.1.600.40,MIB-Dell-10892::aCPowerSwitchTable,,not-accessible,,mandatory,,0600.0040 This object defines the AC Power Switch Table.
.1.3.6.1.4.1.674.10892.1.600.40.1,MIB-Dell-10892::aCPowerSwitchTableEntry,,not-accessible,aCPowerSwitchchassisIndex:aCPowerSwitchIndex,mandatory,,0600.0040.0001 This object defines the AC Power Switch Table Entry.
.1.3.6.1.4.1.674.10892.1.600.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0600.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.40.1.2,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,,0600.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.40.1.3,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,unknownCapabilities(1):inputSourceCord1NoReturnCapable(2):inputSourceCord1ReturnCapable(4):inputSourceCord2NoReturnCapable(8):inputSourceCord1NoReturnCord1ReturnAndCord2NoReturnCapable(14):inputSourceCord2ReturnCapable(16):inputSourceAllExceptSharedCapable(30):inputSourceSharedCapable(32):inputSourceAllCapable(62),0600.0040.0001.0003 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.600.40.1.4,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,unknown(1):inputSourceCord1NoReturn(2):inputSourceCord1Return(4):inputSourceCord2NoReturn(8):inputSourceCord2Return(16):inputSourceShared(32),0600.0040.0001.0004 This attribute defines the settings of the
.1.3.6.1.4.1.674.10892.1.600.40.1.5,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0600.0040.0001.0005 This attribute defines the redundancy status of the
.1.3.6.1.4.1.674.10892.1.600.40.1.6,MIB-Dell-10892::cords,INTEGER,read-only,,mandatory,,0600.0040.0001.0006 This attribute defines the total number of AC power
.1.3.6.1.4.1.674.10892.1.600.40.1.7,MIB-Dell-10892::aCPowerSwitchName,OCTET,read-only,,mandatory,,0600.0040.0001.0007 This attribute defines the name of the AC power switch.
.1.3.6.1.4.1.674.10892.1.600.40.1.8,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,nonRedundant(1):redundant(2),0600.0040.0001.0008 This attribute defines the redundancy mode of the
.1.3.6.1.4.1.674.10892.1.600.40.1.9,MIB-Dell-10892::aCPowerSwitchStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0600.0040.0001.0009 This attribute defines the status of the AC power switch.
.1.3.6.1.4.1.674.10892.1.600.42,MIB-Dell-10892::aCPowerCordTable,,not-accessible,,mandatory,,0600.0042 This object defines the AC Power Cord Table.
.1.3.6.1.4.1.674.10892.1.600.42.1,MIB-Dell-10892::aCPowerCordTableEntry,,not-accessible,aCPowerCordchassisIndex:aCPowerCordIndex,mandatory,,0600.0042.0001 This object defines the AC Power Cord Table Entry.
.1.3.6.1.4.1.674.10892.1.600.42.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0600.0042.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.42.1.2,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,,0600.0042.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.42.1.3,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,unknown(1):enableCapable(2):notReadyCapable(4),0600.0042.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.600.42.1.4,MIB-Dell-10892::AC,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):acPowerCordHasPower(8):acPowerCordIsEnabledAndHasPower(10):acPowerCordIsActiveSource(16):acPowerCordIsEnabledHasPowerAndIsActiveSource(26),0600.0042.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.600.42.1.5,MIB-Dell-10892::aCPowerCordStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0600.0042.0001.0005 This attribute defines the status of the AC power cord.
.1.3.6.1.4.1.674.10892.1.600.42.1.6,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0600.0042.0001.0006 This attribute defines the index (one based) to the
.1.3.6.1.4.1.674.10892.1.600.42.1.7,MIB-Dell-10892::AC,OCTET,read-only,,mandatory,,0600.0042.0001.0007 This attribute defines the location of the
.1.3.6.1.4.1.674.10892.1.600.50,MIB-Dell-10892::batteryTable,,not-accessible,,mandatory,,0600.0050 This object defines the Battery Table.
.1.3.6.1.4.1.674.10892.1.600.50.1,MIB-Dell-10892::batteryTableEntry,,not-accessible,batteryChassisIndex:batteryIndex,mandatory,,0600.0050.0001 This object defines the Battery Table Entry.
.1.3.6.1.4.1.674.10892.1.600.50.1.1,MIB-Dell-10892::chassis,INTEGER,read-only,,mandatory,,0600.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.50.1.2,MIB-Dell-10892::batteryIndex,INTEGER,read-only,,mandatory,,0600.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.50.1.3,MIB-Dell-10892::batteryStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0050.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.600.50.1.4,MIB-Dell-10892::batteryStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0050.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.600.50.1.5,MIB-Dell-10892::batteryStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0600.0050.0001.0005 This attribute defines the status of the battery.
.1.3.6.1.4.1.674.10892.1.600.50.1.6,MIB-Dell-10892::batteryReading,INTEGER,read-only,,mandatory,predictiveFailure(1):failed(2):presenceDetected(4),0600.0050.0001.0006 This attribute defines the reading of the battery.
.1.3.6.1.4.1.674.10892.1.600.50.1.7,MIB-Dell-10892::batteryLocationName,OCTET,read-only,,mandatory,,0600.0050.0001.0007 This attribute defines the location of the battery.
.1.3.6.1.4.1.674.10892.1.600.60,MIB-Dell-10892::powerUsageTable,,not-accessible,,mandatory,,0600.0060 This object defines the Power Usage Table.
.1.3.6.1.4.1.674.10892.1.600.60.1,MIB-Dell-10892::powerUsageTableEntry,,not-accessible,powerUsageChassisIndex:powerUsageIndex,mandatory,,0600.0060.0001 This object defines the Power Usage Table Entry.
.1.3.6.1.4.1.674.10892.1.600.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0600.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.60.1.2,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,,0600.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.60.1.3,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0060.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.600.60.1.4,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0060.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.600.60.1.5,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0600.0060.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.600.60.1.6,MIB-Dell-10892::associated,OCTET,read-only,,mandatory,,0600.0060.0001.0006 This attribute defines the name of the entity
.1.3.6.1.4.1.674.10892.1.600.60.1.7,MIB-Dell-10892::by,Gauge32,read-only,,mandatory,,0600.0060.0001.0007 This attribute defines the total wattage used
.1.3.6.1.4.1.674.10892.1.600.60.1.8,MIB-Dell-10892::powerUsageCumulativeWattage,OCTET,read-only,,mandatory,,0600.0060.0001.0008 This attribute defines the date and time at
.1.3.6.1.4.1.674.10892.1.600.60.1.9,MIB-Dell-10892::powerUsagePeakWattsStartDateName,Gauge32,read-only,,mandatory,,0600.0060.0001.0009 This attribute defines the peak wattage reading
.1.3.6.1.4.1.674.10892.1.600.60.1.10,MIB-Dell-10892::powerUsagePeakWatts,OCTET,read-only,,mandatory,,0600.0060.0001.0010 This attribute defines the date and time at
.1.3.6.1.4.1.674.10892.1.600.60.1.11,MIB-Dell-10892::which,OCTET,read-only,,mandatory,,0600.0060.0001.0011 This attribute defines the date and time at
.1.3.6.1.4.1.674.10892.1.600.60.1.12,MIB-Dell-10892::by,Gauge32,read-only,,mandatory,,0600.0060.0001.0012 This attribute defines the peak amperage reading
.1.3.6.1.4.1.674.10892.1.600.60.1.13,MIB-Dell-10892::powerUsagePeakAmps,OCTET,read-only,,mandatory,,0600.0060.0001.0013 This attribute defines the date and time at
.1.3.6.1.4.1.674.10892.1.600.60.1.14,MIB-Dell-10892::which,OCTET,read-only,,mandatory,,0600.0060.0001.0014 This attribute defines the date and time at
.1.3.6.1.4.1.674.10892.1.600.60.1.15,MIB-Dell-10892::based,Gauge32,read-only,,mandatory,,0600.0060.0001.0015 This attribute defines the system idle power
.1.3.6.1.4.1.674.10892.1.600.60.1.16,MIB-Dell-10892::based,Gauge32,read-only,,mandatory,,0600.0060.0001.0016 This attribute defines the system maximum potential
.1.3.6.1.4.1.674.10892.1.600.60.1.17,MIB-Dell-10892::powerUsagePowerCapCapabilities,INTEGER,read-only,,mandatory,enable(1):disable(2),0600.0060.0001.0017 This attribute defines the system power cap capabilities.
.1.3.6.1.4.1.674.10892.1.600.60.1.18,MIB-Dell-10892::powerUsagePowerCapSetting,INTEGER,read-only,,mandatory,enabled(1),0600.0060.0001.0018 This attribute defines the system power cap setting.
.1.3.6.1.4.1.674.10892.1.600.60.1.19,MIB-Dell-10892::(in,Gauge32,read-only,,mandatory,,0600.0060.0001.0019 This attribute defines the system power cap value
.1.3.6.1.4.1.674.10892.1.600.60.1.20,MIB-Dell-10892::the,Gauge32,read-only,,mandatory,,0600.0060.0001.0020 This attribute defines the system instantaneous
.1.3.6.1.4.1.674.10892.1.600.60.1.21,MIB-Dell-10892::supply,Gauge32,read-only,,mandatory,,0600.0060.0001.0021 This attribute defines the system peak headroom
.1.3.6.1.4.1.674.10892.1.600.70,MIB-Dell-10892::powerProfileTable,,not-accessible,,mandatory,,0600.0070 This object defines the Power Profile Table.
.1.3.6.1.4.1.674.10892.1.600.70.1,MIB-Dell-10892::powerProfileTableEntry,,not-accessible,powerProfileChassisIndex:powerProfileIndex,mandatory,,0600.0070.0001 This object defines the Power Profile Table Entry.
.1.3.6.1.4.1.674.10892.1.600.70.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0600.0070.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.70.1.2,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,,0600.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.600.70.1.3,MIB-Dell-10892::powerProfileSupportedProfiles,INTEGER,read-only,,mandatory,maxPerformance(1):osControl(2):activePowerController(4):custom(8),0600.0070.0001.0003 This attribute defines the supported power profiles.
.1.3.6.1.4.1.674.10892.1.600.70.1.4,MIB-Dell-10892::powerProfileSetting,INTEGER,read-only,,mandatory,maxPerformance(1):osControl(2):activePowerController(4):custom(8),0600.0070.0001.0004 This attribute defines the power profile setting.
.1.3.6.1.4.1.674.10892.1.600.70.1.5,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,maxPerformance(1):minPower(2):osDBPM(4):systemDBPM(8),0600.0070.0001.0005 This attribute defines the custom CPU power and
.1.3.6.1.4.1.674.10892.1.600.70.1.6,MIB-Dell-10892::performance,INTEGER,read-only,,mandatory,maxPerformance(1):minPower(2):osDBPM(4):systemDBPM(8),0600.0070.0001.0006 This attribute defines the custom CPU power and
.1.3.6.1.4.1.674.10892.1.600.70.1.7,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,maxPerformance(1):mhz1333(2):mhz1067(4):mhz800(8):minPower(16),0600.0070.0001.0007 This attribute defines the custom memory power and
.1.3.6.1.4.1.674.10892.1.600.70.1.8,MIB-Dell-10892::performance,INTEGER,read-only,,mandatory,maxPerformance(1):mhz1333(2):mhz1067(4):mhz800(8):minPower(16),0600.0070.0001.0008 This attribute defines the custom memory power and
.1.3.6.1.4.1.674.10892.1.600.70.1.9,MIB-Dell-10892::power,INTEGER,read-only,,mandatory,maxPerformance(1):minPower(2),0600.0070.0001.0009 This attribute defines the custom fan power and
.1.3.6.1.4.1.674.10892.1.600.70.1.10,MIB-Dell-10892::performance,INTEGER,read-only,,mandatory,maxPerformance(1):minPower(2),0600.0070.0001.0010 This attribute defines the custom fan power and
.1.3.6.1.4.1.674.10892.1.700,MIB-Dell-10892::thermalGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.700.10,MIB-Dell-10892::coolingUnitTable,,not-accessible,,mandatory,,0700.0010 This object defines the Cooling Unit Table.
.1.3.6.1.4.1.674.10892.1.700.10.1,MIB-Dell-10892::coolingUnitTableEntry,,not-accessible,coolingUnitchassisIndex:coolingUnitIndex,mandatory,,0700.0010.0001 This object defines the Cooling Unit Table Entry.
.1.3.6.1.4.1.674.10892.1.700.10.1.1,MIB-Dell-10892::assoicated,INTEGER,read-only,,mandatory,,0700.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.700.10.1.2,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.700.10.1.3,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0700.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.700.10.1.4,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0700.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.700.10.1.5,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0700.0010.0001.0005 This attribute defines the redundancy status of the
.1.3.6.1.4.1.674.10892.1.700.10.1.6,MIB-Dell-10892::required,INTEGER,read-only,,mandatory,,0700.0010.0001.0006 This attribute defines the total number of cooling devices
.1.3.6.1.4.1.674.10892.1.700.10.1.7,MIB-Dell-10892::coolingUnitName,OCTET,read-only,,mandatory,,0700.0010.0001.0007 This attribute defines the name of the cooling unit.
.1.3.6.1.4.1.674.10892.1.700.10.1.8,MIB-Dell-10892::coolingUnitStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0700.0010.0001.0008 This attribute defines the status of the cooling unit.
.1.3.6.1.4.1.674.10892.1.700.12,MIB-Dell-10892::coolingDeviceTable,,not-accessible,,mandatory,,0700.0012 This object defines the Cooling Device Table.
.1.3.6.1.4.1.674.10892.1.700.12.1,MIB-Dell-10892::coolingDeviceTableEntry,,not-accessible,coolingDevicechassisIndex:coolingDeviceIndex,mandatory,,0700.0012.0001 This object defines the Cooling Device Table Entry.
.1.3.6.1.4.1.674.10892.1.700.12.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0700.0012.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.700.12.1.2,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.700.12.1.3,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0700.0012.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.700.12.1.4,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0700.0012.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.700.12.1.5,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0700.0012.0001.0005 This attribute defines the probe status of the
.1.3.6.1.4.1.674.10892.1.700.12.1.6,MIB-Dell-10892::coolingDeviceSubTypeIsDiscrete,,INTEGER,read-only,,mandatory,,0700.0012.0001.0006 This attribute defines the reading for a cooling device
.1.3.6.1.4.1.674.10892.1.700.12.1.7,MIB-Dell-10892::coolingDeviceType,INTEGER,read-only,,mandatory,coolingDeviceTypeIsOther(1):coolingDeviceTypeIsUnknown(2):coolingDeviceTypeIsAFan(3):coolingDeviceTypeIsABlower(4):coolingDeviceTypeIsAChipFan(5):coolingDeviceTypeIsACabinetFan(6):coolingDeviceTypeIsAPowerSupplyFan(7):coolingDeviceTypeIsAHeatPipe(8):coolingDeviceTypeIsRefrigeration(9):coolingDeviceTypeIsActiveCooling(10):coolingDeviceTypeIsPassiveCooling(11),0700.0012.0001.0007 This attribute defines the type of the cooling device.
.1.3.6.1.4.1.674.10892.1.700.12.1.8,MIB-Dell-10892::cooling,OCTET,read-only,,mandatory,,0700.0012.0001.0008 This attribute defines the location name of the
.1.3.6.1.4.1.674.10892.1.700.12.1.9,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0009 This attribute defines the upper nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.700.12.1.10,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0010 This attribute defines the upper critical threshold
.1.3.6.1.4.1.674.10892.1.700.12.1.11,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0011 This attribute defines the upper noncritical threshold
.1.3.6.1.4.1.674.10892.1.700.12.1.12,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0012 This attribute defines the lower noncritical threshold
.1.3.6.1.4.1.674.10892.1.700.12.1.13,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0013 This attribute defines the lower critical threshold
.1.3.6.1.4.1.674.10892.1.700.12.1.14,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0014 This attribute defines the lower nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.700.12.1.15,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,,0700.0012.0001.0015 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.700.12.1.16,MIB-Dell-10892::coolingDeviceSubType,INTEGER,read-only,,mandatory,coolingDeviceSubTypeIsOther(1):coolingDeviceSubTypeIsUnknown(2):coolingDeviceSubTypeIsAFanThatReadsInRPM(3):coolingDeviceSubTypeIsAFanReadsONorOFF(4):coolingDeviceSubTypeIsAPowerSupplyFanThatReadsinRPM(5):coolingDeviceSubTypeIsAPowerSupplyFanThatReadsONorOFF(6):coolingDeviceSubTypeIsDiscrete(16),0700.0012.0001.0016 This attribute defines the subtype of the cooling device.
.1.3.6.1.4.1.674.10892.1.700.12.1.17,MIB-Dell-10892::cooling,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0700.0012.0001.0017 This attribute defines the probe capabilities of the
.1.3.6.1.4.1.674.10892.1.700.12.1.18,MIB-Dell-10892::is,INTEGER,read-only,,mandatory,coolingDeviceIsGood(1):coolingDeviceIsBad(2),0700.0012.0001.0018 This attribute defines the reading for a cooling device
.1.3.6.1.4.1.674.10892.1.700.20,MIB-Dell-10892::temperatureProbeTable,,not-accessible,,mandatory,,0700.0020 This object defines the Temperature Probe Table.
.1.3.6.1.4.1.674.10892.1.700.20.1,MIB-Dell-10892::temperatureProbeTableEntry,,not-accessible,temperatureProbechassisIndex:temperatureProbeIndex,mandatory,,0700.0020.0001 This object defines the Temperature Probe Table Entry.
.1.3.6.1.4.1.674.10892.1.700.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0700.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.700.20.1.2,MIB-Dell-10892::temperature,INTEGER,read-only,,mandatory,,0700.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.700.20.1.3,MIB-Dell-10892::temperature,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0700.0020.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.700.20.1.4,MIB-Dell-10892::temperature,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0700.0020.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.700.20.1.5,MIB-Dell-10892::temperature,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0700.0020.0001.0005 This attribute defines the probe status of the
.1.3.6.1.4.1.674.10892.1.700.20.1.6,MIB-Dell-10892::returned,INTEGER,read-only,,mandatory,,0700.0020.0001.0006 This attribute defines the reading for a temperature
.1.3.6.1.4.1.674.10892.1.700.20.1.7,MIB-Dell-10892::temperatureProbeType,INTEGER,read-only,,mandatory,temperatureProbeTypeIsOther(1):temperatureProbeTypeIsUnknown(2):temperatureProbeTypeIsAmbientESM(3):temperatureProbeTypeIsDiscrete(16),0700.0020.0001.0007 This attribute defines the type of the temperature probe.
.1.3.6.1.4.1.674.10892.1.700.20.1.8,MIB-Dell-10892::temperature,OCTET,read-only,,mandatory,,0700.0020.0001.0008 This attribute defines the location name of the
.1.3.6.1.4.1.674.10892.1.700.20.1.9,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0700.0020.0001.0009 This attribute defines the upper nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.700.20.1.10,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0700.0020.0001.0010 This attribute defines the upper critical threshold
.1.3.6.1.4.1.674.10892.1.700.20.1.11,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0700.0020.0001.0011 This attribute defines the upper noncritical threshold
.1.3.6.1.4.1.674.10892.1.700.20.1.12,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0700.0020.0001.0012 This attribute defines the lower noncritical threshold
.1.3.6.1.4.1.674.10892.1.700.20.1.13,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0700.0020.0001.0013 This attribute defines the lower critical threshold
.1.3.6.1.4.1.674.10892.1.700.20.1.14,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,0700.0020.0001.0014 This attribute defines the lower nonrecoverable threshold
.1.3.6.1.4.1.674.10892.1.700.20.1.15,MIB-Dell-10892::temperature,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0700.0020.0001.0015 This attribute defines the probe capabilities of the
.1.3.6.1.4.1.674.10892.1.700.20.1.16,MIB-Dell-10892::is,INTEGER,read-only,,mandatory,temperatureIsGood(1):temperatureIsBad(2),0700.0020.0001.0016 This attribute defines the reading for a temperature
.1.3.6.1.4.1.674.10892.1.800,MIB-Dell-10892::userSecurityGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.800.10,MIB-Dell-10892::userSecurityTable,,not-accessible,,mandatory,,0800.0010 This object defines the User Security Table.
.1.3.6.1.4.1.674.10892.1.800.10.1,MIB-Dell-10892::userSecurityTableEntry,,not-accessible,userSecuritychassisIndex:userSecurityIndex,mandatory,,0800.0010.0001 This object defines the User Security Table Entry.
.1.3.6.1.4.1.674.10892.1.800.10.1.1,MIB-Dell-10892::assoicated,INTEGER,read-only,,mandatory,,0800.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.800.10.1.2,MIB-Dell-10892::userSecurityIndex,INTEGER,read-only,,mandatory,,0800.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.800.10.1.3,MIB-Dell-10892::that,OCTET,read-only,,mandatory,,0800.0010.0001.0003 This attribute defines the name of the user
.1.3.6.1.4.1.674.10892.1.800.10.1.4,MIB-Dell-10892::that,OCTET,read-only,,mandatory,,0800.0010.0001.0004 This attribute defines the control string
.1.3.6.1.4.1.674.10892.1.800.10.1.5,MIB-Dell-10892::that,OCTET,read-only,,mandatory,,0800.0010.0001.0005 This attribute defines the request string
.1.3.6.1.4.1.674.10892.1.900,MIB-Dell-10892::remoteFlashBIOSGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.900.10,MIB-Dell-10892::remoteFlashBIOSTable,,not-accessible,,mandatory,,0900.0010 This object defines the Remote Flash BIOS Table.
.1.3.6.1.4.1.674.10892.1.900.10.1,MIB-Dell-10892::remoteFlashBIOSTableEntry,,not-accessible,remoteFlashBIOSchassisIndex:remoteFlashBIOSIndex,mandatory,,0900.0010.0001 This object defines the Remote Flash BIOS Table Entry.
.1.3.6.1.4.1.674.10892.1.900.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,0900.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.900.10.1.2,MIB-Dell-10892::remote,INTEGER,read-only,,mandatory,,0900.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.900.10.1.3,MIB-Dell-10892::remote,INTEGER,read-only,,mandatory,unknown(1):enableCapable(2):notReadyCapable(4):cancelCapable(8):enableAndCancelCapable(10),0900.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.900.10.1.4,MIB-Dell-10892::remote,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):canceled(8):pending(16):other(32),0900.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.900.10.1.5,MIB-Dell-10892::remote,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),0900.0010.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.900.10.1.6,MIB-Dell-10892::UTC,OCTET,read-only,,mandatory,,0900.0010.0001.0006 This attribute defines the date of last BIOS update. yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.900.10.1.7,MIB-Dell-10892::last,INTEGER,read-only,,mandatory,completionCodeIsOther(1):completionCodeIsUnknown(2):completionCodeIsOK(3):completionCodeIsBadImage(4):completionCodeIsNoFileAccess(5):completionCodeIsNotReady(6):completionCodeIsDisabled(7):completionCodeIsNoBattery(8):completionCodeIsNoChargedBattery(9):completionCodeIsNoExternalPower(10):completionCodeIsNo12VoltSet(11):completionCodeIsNo12VoltRemoval(12):completionCodeIsFlashMemoryFailed(13):completionCodeIsGeneralFailure(14):completionCodeIsDataMiscompare(15):completionCodeIsNoImageFound(16):completionCodeIsNoUpdatePerformed(17),0900.0010.0001.0007 This attribute defines the completion code of the
.1.3.6.1.4.1.674.10892.1.900.10.1.8,MIB-Dell-10892::memory,Gauge32,read-only,,mandatory,,0900.0010.0001.0008 This attribute defines the minimum size of contiguous
.1.3.6.1.4.1.674.10892.1.1000,MIB-Dell-10892::portGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1000.10,MIB-Dell-10892::pointingPortTable,,not-accessible,,mandatory,,1000.0010 This object defines the Pointing Port Table.
.1.3.6.1.4.1.674.10892.1.1000.10.1,MIB-Dell-10892::pointingPortTableEntry,,not-accessible,pointingPortchassisIndex:pointingPortIndex,mandatory,,1000.0010.0001 This object defines the Pointing Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.10.1.2,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,,1000.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.10.1.3,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.10.1.4,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.10.1.5,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0010.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.10.1.6,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0010.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.10.1.7,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsSerial(3):connectorPortTypeIsPS2(4):connectorPortTypeIsInfrared(5):connectorPortTypeIsHPHIL(6):connectorPortTypeIsBusMouse(7):connectorPortTypeIsADB(8):connectorPortTypeIsDB9(9):connectorPortTypeIsMicroDIN(10):connectorPortTypeIsAccessBusUSB(11):connectorPortTypeIsPC98(12),1000.0010.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.10.1.8,MIB-Dell-10892::pointingPortName,OCTET,read-only,,mandatory,,1000.0010.0001.0008 This attribute defines name of the pointing port.
.1.3.6.1.4.1.674.10892.1.1000.10.1.9,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,portConnectorTypeIsOther(1):portConnectorTypeIsNone(2):portConnectorTypeIsCentronics(3):portConnectorTypeIsMiniCentronics(4):portConnectorTypeIsProprietary(5):portConnectorTypeIsDB25Male(6):portConnectorTypeIsDB25Female(7):portConnectorTypeIsDB15Male(8):portConnectorTypeIsDB15Female(9):portConnectorTypeIsDB9Male(10):portConnectorTypeIsDB9Female(11):portConnectorTypeIsRJ11(12):portConnectorTypeIsRJ45(13):portConnectorTypeIsMiniSCSI50Pin(14):portConnectorTypeIsMiniDIN(15):portConnectorTypeIsMicroDIN(16):portConnectorTypeIsPS2(17):portConnectorTypeIsInfrared(18):portConnectorTypeIsHPHIL(19):portConnectorTypeIsAccessBussUSB(20):portConnectorTypeISSASCSI(21):portConnectorTypeIsCirdin8Male(22):portConnectorTypeIsCirdin8Female(23):portConnectorTypeIsIDE(24):portConnectorTypeIsFloppy(25):portConnectorTypeIsDIN9Pin(26):portConnectorTypeIsDIN25Pin(27):portConnectorTypeIsDIN50Pin(28):portConnectorTypeIsDIN68Pin(29):portConnectorTypeIsCDROMLineOut(30):portConnectorTypeIsMiniCentronics14(31):portConnectorTypeIsMiniCentronics26(32):portConnectorTypeIsMiniJack(33):portConnectorTypeIsBNC(34):portConnectorTypeIs1394(35):portConnectorTypeIsPC98(36):portConnectorTypeIsPC98Hireso(37):portConnectorTypeIsPCH98(38):portConnectorTypeIsPC98Note(39):portConnectorTypeIsPC98Full(40),1000.0010.0001.0009 This attribute defines the BIOS connector type of the
.1.3.6.1.4.1.674.10892.1.1000.20,MIB-Dell-10892::keyboardPortTable,,not-accessible,,mandatory,,1000.0020 This object defines the Keyboard Port Table.
.1.3.6.1.4.1.674.10892.1.1000.20.1,MIB-Dell-10892::keyboardPortTableEntry,,not-accessible,keyboardPortchassisIndex:keyboardPortIndex,mandatory,,1000.0020.0001 This object defines the Keyboard Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.20.1.2,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,,1000.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.20.1.3,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0020.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.20.1.4,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0020.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.20.1.5,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0020.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.20.1.6,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0020.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.20.1.7,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsMiniDIN(3):connectorPortTypeIsMicroDIN(4):connectorPortTypeIsPS2(5):connectorPortTypeIsInfrared(6):connectorPortTypeIsHPHIL(7):connectorPortTypeIsDB9(8):connectorPortTypeIsAccessBusUSB(9):connectorPortTypeIsPC98(10),1000.0020.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.20.1.8,MIB-Dell-10892::keyboardPortName,OCTET,read-only,,mandatory,,1000.0020.0001.0008 This attribute defines name of the keyboard port.
.1.3.6.1.4.1.674.10892.1.1000.20.1.9,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,portConnectorTypeIsOther(1):portConnectorTypeIsNone(2):portConnectorTypeIsCentronics(3):portConnectorTypeIsMiniCentronics(4):portConnectorTypeIsProprietary(5):portConnectorTypeIsDB25Male(6):portConnectorTypeIsDB25Female(7):portConnectorTypeIsDB15Male(8):portConnectorTypeIsDB15Female(9):portConnectorTypeIsDB9Male(10):portConnectorTypeIsDB9Female(11):portConnectorTypeIsRJ11(12):portConnectorTypeIsRJ45(13):portConnectorTypeIsMiniSCSI50Pin(14):portConnectorTypeIsMiniDIN(15):portConnectorTypeIsMicroDIN(16):portConnectorTypeIsPS2(17):portConnectorTypeIsInfrared(18):portConnectorTypeIsHPHIL(19):portConnectorTypeIsAccessBussUSB(20):portConnectorTypeISSASCSI(21):portConnectorTypeIsCirdin8Male(22):portConnectorTypeIsCirdin8Female(23):portConnectorTypeIsIDE(24):portConnectorTypeIsFloppy(25):portConnectorTypeIsDIN9Pin(26):portConnectorTypeIsDIN25Pin(27):portConnectorTypeIsDIN50Pin(28):portConnectorTypeIsDIN68Pin(29):portConnectorTypeIsCDROMLineOut(30):portConnectorTypeIsMiniCentronics14(31):portConnectorTypeIsMiniCentronics26(32):portConnectorTypeIsMiniJack(33):portConnectorTypeIsBNC(34):portConnectorTypeIs1394(35):portConnectorTypeIsPC98(36):portConnectorTypeIsPC98Hireso(37):portConnectorTypeIsPCH98(38):portConnectorTypeIsPC98Note(39):portConnectorTypeIsPC98Full(40),1000.0020.0001.0009 This attribute defines the BIOS connector type of the
.1.3.6.1.4.1.674.10892.1.1000.30,MIB-Dell-10892::processorPortTable,,not-accessible,,mandatory,,1000.0030 This object defines the Processor Port Table.
.1.3.6.1.4.1.674.10892.1.1000.30.1,MIB-Dell-10892::processorPortTableEntry,,not-accessible,processorPortchassisIndex:processorPortIndex,mandatory,,1000.0030.0001 This object defines the Processor Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.30.1.2,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,,1000.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.30.1.3,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0030.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.30.1.4,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0030.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.30.1.5,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0030.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.30.1.6,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0030.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.30.1.7,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsDaughterdBoard(3):connectorPortTypeIsZIFSocket(4):connectorPortTypeIsAPiggyBackBoard(5):connectorPortTypeIsNone(6):connectorPortTypeIsLIFSocket(7):connectorPortTypeIsSlot1(8):connectorPortTypeIsSlot2(9):connectorPortTypeIs370PinSocket(10),1000.0030.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.30.1.8,MIB-Dell-10892::processorPortName,OCTET,read-only,,mandatory,,1000.0030.0001.0008 This attribute defines name of the processor port.
.1.3.6.1.4.1.674.10892.1.1000.30.1.9,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,portConnectorTypeIsOther(1):portConnectorTypeIsNone(2):portConnectorTypeIsCentronics(3):portConnectorTypeIsMiniCentronics(4):portConnectorTypeIsProprietary(5):portConnectorTypeIsDB25Male(6):portConnectorTypeIsDB25Female(7):portConnectorTypeIsDB15Male(8):portConnectorTypeIsDB15Female(9):portConnectorTypeIsDB9Male(10):portConnectorTypeIsDB9Female(11):portConnectorTypeIsRJ11(12):portConnectorTypeIsRJ45(13):portConnectorTypeIsMiniSCSI50Pin(14):portConnectorTypeIsMiniDIN(15):portConnectorTypeIsMicroDIN(16):portConnectorTypeIsPS2(17):portConnectorTypeIsInfrared(18):portConnectorTypeIsHPHIL(19):portConnectorTypeIsAccessBussUSB(20):portConnectorTypeISSASCSI(21):portConnectorTypeIsCirdin8Male(22):portConnectorTypeIsCirdin8Female(23):portConnectorTypeIsIDE(24):portConnectorTypeIsFloppy(25):portConnectorTypeIsDIN9Pin(26):portConnectorTypeIsDIN25Pin(27):portConnectorTypeIsDIN50Pin(28):portConnectorTypeIsDIN68Pin(29):portConnectorTypeIsCDROMLineOut(30):portConnectorTypeIsMiniCentronics14(31):portConnectorTypeIsMiniCentronics26(32):portConnectorTypeIsMiniJack(33):portConnectorTypeIsBNC(34):portConnectorTypeIs1394(35):portConnectorTypeIsPC98(36):portConnectorTypeIsPC98Hireso(37):portConnectorTypeIsPCH98(38):portConnectorTypeIsPC98Note(39):portConnectorTypeIsPC98Full(40),1000.0030.0001.0009 This attribute defines the BIOS connector type of the
.1.3.6.1.4.1.674.10892.1.1000.40,MIB-Dell-10892::memoryDevicePortTable,,not-accessible,,mandatory,,1000.0040 This object defines the Memory Device Port Table.
.1.3.6.1.4.1.674.10892.1.1000.40.1,MIB-Dell-10892::memoryDevicePortTableEntry,,not-accessible,memoryDevicePortchassisIndex:memoryDevicePortIndex,mandatory,,1000.0040.0001 This object defines the Memory Device Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.2,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,,1000.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.3,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0040.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.4,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0040.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.5,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0040.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.6,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0040.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.7,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsSIMM(3):connectorPortTypeIsSIP(4):connectorPortTypeIsAChip(5):connectorPortTypeIsDIP(6):connectorPortTypeIsZIP(7):connectorPortTypeIsAProprietaryCard(8):connectorPortTypeIsDIMM(9):connectorPortTypeIsTSOP(10):connectorPortTypeIsARowOfChips(11):connectorPortTypeIsRIMM(12):connectorPortTypeIsSODIMM(13):connectorPortTypeIsSRIMM(14),1000.0040.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.8,MIB-Dell-10892::memoryDevicePortName,OCTET,read-only,,mandatory,,1000.0040.0001.0008 This attribute defines name of the memory device port.
.1.3.6.1.4.1.674.10892.1.1000.40.1.9,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,portConnectorTypeIsOther(1):portConnectorTypeIsNone(2):portConnectorTypeIsCentronics(3):portConnectorTypeIsMiniCentronics(4):portConnectorTypeIsProprietary(5):portConnectorTypeIsDB25Male(6):portConnectorTypeIsDB25Female(7):portConnectorTypeIsDB15Male(8):portConnectorTypeIsDB15Female(9):portConnectorTypeIsDB9Male(10):portConnectorTypeIsDB9Female(11):portConnectorTypeIsRJ11(12):portConnectorTypeIsRJ45(13):portConnectorTypeIsMiniSCSI50Pin(14):portConnectorTypeIsMiniDIN(15):portConnectorTypeIsMicroDIN(16):portConnectorTypeIsPS2(17):portConnectorTypeIsInfrared(18):portConnectorTypeIsHPHIL(19):portConnectorTypeIsAccessBussUSB(20):portConnectorTypeISSASCSI(21):portConnectorTypeIsCirdin8Male(22):portConnectorTypeIsCirdin8Female(23):portConnectorTypeIsIDE(24):portConnectorTypeIsFloppy(25):portConnectorTypeIsDIN9Pin(26):portConnectorTypeIsDIN25Pin(27):portConnectorTypeIsDIN50Pin(28):portConnectorTypeIsDIN68Pin(29):portConnectorTypeIsCDROMLineOut(30):portConnectorTypeIsMiniCentronics14(31):portConnectorTypeIsMiniCentronics26(32):portConnectorTypeIsMiniJack(33):portConnectorTypeIsBNC(34):portConnectorTypeIs1394(35):portConnectorTypeIsPC98(36):portConnectorTypeIsPC98Hireso(37):portConnectorTypeIsPCH98(38):portConnectorTypeIsPC98Note(39):portConnectorTypeIsPC98Full(40),1000.0040.0001.0009 This attribute defines the BIOS connector type of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.10,MIB-Dell-10892::same,Gauge32,read-only,,mandatory,,1000.0040.0001.0010 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.40.1.11,MIB-Dell-10892::same,Gauge32,read-only,,mandatory,,1000.0040.0001.0011 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.50,MIB-Dell-10892::monitorPortTable,,not-accessible,,mandatory,,1000.0050 This object defines the Monitor Port Table.
.1.3.6.1.4.1.674.10892.1.1000.50.1,MIB-Dell-10892::monitorPortTableEntry,,not-accessible,monitorPortchassisIndex:monitorPortIndex,mandatory,,1000.0050.0001 This object defines the Monitor Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.50.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.50.1.2,MIB-Dell-10892::monitor,INTEGER,read-only,,mandatory,,1000.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.50.1.3,MIB-Dell-10892::monitor,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0050.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.50.1.4,MIB-Dell-10892::monitor,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0050.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.50.1.5,MIB-Dell-10892::monitor,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0050.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.50.1.6,MIB-Dell-10892::monitor,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0050.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.50.1.7,MIB-Dell-10892::monitor,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsDB15PinMale(3):connectorPortTypeIsDB15PinFemale(4),1000.0050.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.50.1.8,MIB-Dell-10892::monitorPortName,OCTET,read-only,,mandatory,,1000.0050.0001.0008 This attribute defines name of the monitor port.
.1.3.6.1.4.1.674.10892.1.1000.50.1.9,MIB-Dell-10892::monitor,INTEGER,read-only,,mandatory,portConnectorTypeIsOther(1):portConnectorTypeIsNone(2):portConnectorTypeIsCentronics(3):portConnectorTypeIsMiniCentronics(4):portConnectorTypeIsProprietary(5):portConnectorTypeIsDB25Male(6):portConnectorTypeIsDB25Female(7):portConnectorTypeIsDB15Male(8):portConnectorTypeIsDB15Female(9):portConnectorTypeIsDB9Male(10):portConnectorTypeIsDB9Female(11):portConnectorTypeIsRJ11(12):portConnectorTypeIsRJ45(13):portConnectorTypeIsMiniSCSI50Pin(14):portConnectorTypeIsMiniDIN(15):portConnectorTypeIsMicroDIN(16):portConnectorTypeIsPS2(17):portConnectorTypeIsInfrared(18):portConnectorTypeIsHPHIL(19):portConnectorTypeIsAccessBussUSB(20):portConnectorTypeISSASCSI(21):portConnectorTypeIsCirdin8Male(22):portConnectorTypeIsCirdin8Female(23):portConnectorTypeIsIDE(24):portConnectorTypeIsFloppy(25):portConnectorTypeIsDIN9Pin(26):portConnectorTypeIsDIN25Pin(27):portConnectorTypeIsDIN50Pin(28):portConnectorTypeIsDIN68Pin(29):portConnectorTypeIsCDROMLineOut(30):portConnectorTypeIsMiniCentronics14(31):portConnectorTypeIsMiniCentronics26(32):portConnectorTypeIsMiniJack(33):portConnectorTypeIsBNC(34):portConnectorTypeIs1394(35):portConnectorTypeIsPC98(36):portConnectorTypeIsPC98Hireso(37):portConnectorTypeIsPCH98(38):portConnectorTypeIsPC98Note(39):portConnectorTypeIsPC98Full(40),1000.0050.0001.0009 This attribute defines the BIOS connector type of the
.1.3.6.1.4.1.674.10892.1.1000.60,MIB-Dell-10892::Port,,not-accessible,,mandatory,,1000.0060 This object defines the Small Computer Systems Interface (SCSI)
.1.3.6.1.4.1.674.10892.1.1000.60.1,MIB-Dell-10892::Port,,not-accessible,sCSIPortchassisIndex:sCSIPortIndex,mandatory,,1000.0060.0001 This object defines the Small Computer Systems Interface (SCSI)
.1.3.6.1.4.1.674.10892.1.1000.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.60.1.2,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,,1000.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.60.1.3,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0060.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.60.1.4,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0060.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.60.1.5,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0060.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.60.1.6,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0060.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.60.1.7,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsDIN25pin(3):connectorPortTypeIsDIN50pin(4):connectorPortTypeIsDIN68pin(5),1000.0060.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.60.1.8,MIB-Dell-10892::sCSIPortName,OCTET,read-only,,mandatory,,1000.0060.0001.0008 This attribute defines name of the SCSI port.
.1.3.6.1.4.1.674.10892.1.1000.60.1.9,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,portConnectorTypeIsOther(1):portConnectorTypeIsNone(2):portConnectorTypeIsCentronics(3):portConnectorTypeIsMiniCentronics(4):portConnectorTypeIsProprietary(5):portConnectorTypeIsDB25Male(6):portConnectorTypeIsDB25Female(7):portConnectorTypeIsDB15Male(8):portConnectorTypeIsDB15Female(9):portConnectorTypeIsDB9Male(10):portConnectorTypeIsDB9Female(11):portConnectorTypeIsRJ11(12):portConnectorTypeIsRJ45(13):portConnectorTypeIsMiniSCSI50Pin(14):portConnectorTypeIsMiniDIN(15):portConnectorTypeIsMicroDIN(16):portConnectorTypeIsPS2(17):portConnectorTypeIsInfrared(18):portConnectorTypeIsHPHIL(19):portConnectorTypeIsAccessBussUSB(20):portConnectorTypeISSASCSI(21):portConnectorTypeIsCirdin8Male(22):portConnectorTypeIsCirdin8Female(23):portConnectorTypeIsIDE(24):portConnectorTypeIsFloppy(25):portConnectorTypeIsDIN9Pin(26):portConnectorTypeIsDIN25Pin(27):portConnectorTypeIsDIN50Pin(28):portConnectorTypeIsDIN68Pin(29):portConnectorTypeIsCDROMLineOut(30):portConnectorTypeIsMiniCentronics14(31):portConnectorTypeIsMiniCentronics26(32):portConnectorTypeIsMiniJack(33):portConnectorTypeIsBNC(34):portConnectorTypeIs1394(35):portConnectorTypeIsPC98(36):portConnectorTypeIsPC98Hireso(37):portConnectorTypeIsPCH98(38):portConnectorTypeIsPC98Note(39):portConnectorTypeIsPC98Full(40),1000.0060.0001.0009 This attribute defines the BIOS connector type of the
.1.3.6.1.4.1.674.10892.1.1000.70,MIB-Dell-10892::parallelPortTable,,not-accessible,,mandatory,,1000.0070 This object defines the Parallel Port Table.
.1.3.6.1.4.1.674.10892.1.1000.70.1,MIB-Dell-10892::parallelPortTableEntry,,not-accessible,parallelPortchassisIndex:parallelPortIndex,mandatory,,1000.0070.0001 This object defines the Parallel Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.70.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0070.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.2,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,,1000.0070.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.3,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0070.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.4,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0070.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.5,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0070.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.6,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0070.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.7,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsDB25PinFemale(3):connectorPortTypeIsDB25PinMale(4):connectorPortTypeIsCentronics(5):connectorPortTypeIsMiniCentronics(6):connectorPortTypeIsProprietary(7):connectorPortTypeIsCentronics14(8):connectorPortTypeIsDB36PinFemale(9):connectorPortTypeIsMiniCentronics20(10),1000.0070.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.8,MIB-Dell-10892::parallel,OCTET,read-only,,mandatory,,1000.0070.0001.0008 This attribute defines the name of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.9,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,connectorPortPinoutIsOther(1):connectorPortPinoutIsUnknown(2):connectorPortPinoutIsXTorAT(3):connectorPortPinoutIsPS2(4):connectorPortPinoutIsIEEE1284(5):connectorPortPinoutIsProprietary(6):connectorPortPinoutIsPC98(7):connectorPortPinoutIsPC98Hireso(8):connectorPortPinoutIsPC98Note(9):connectorPortPinoutIsPC98Full(10),1000.0070.0001.0009 This attribute defines the pinout of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.10,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,unknown(1):atCapable(2):ps2Capable(4):ecpCapable(8):eppCapable(16):atOrPS2OrECPOrEPPCapable(30):pc98Capable(32):pc98HiresoCapable(64):pc98HCapable(128),1000.0070.0001.0010 This attribute defines the mode capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.70.1.11,MIB-Dell-10892::the,OCTET,read-only,,mandatory,,1000.0070.0001.0011 This attribute defines the base Input/Output address of
.1.3.6.1.4.1.674.10892.1.1000.70.1.12,MIB-Dell-10892::the,INTEGER,read-only,,mandatory,,1000.0070.0001.0012 This attribute defines the Interrupt Request Level of
.1.3.6.1.4.1.674.10892.1.1000.70.1.13,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,,1000.0070.0001.0013 This attribute defines if DMA is supported by the
.1.3.6.1.4.1.674.10892.1.1000.80,MIB-Dell-10892::serialPortTable,,not-accessible,,mandatory,,1000.0080 This object defines the Serial Port Table.
.1.3.6.1.4.1.674.10892.1.1000.80.1,MIB-Dell-10892::serialPortTableEntry,,not-accessible,serialPortchassisIndex:serialPortIndex,mandatory,,1000.0080.0001 This object defines the Serial Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.80.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0080.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.2,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,,1000.0080.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.3,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0080.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.4,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0080.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.5,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0080.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.6,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0080.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.7,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsDB9PinMale(3):connectorPortTypeIsDB9PinFemale(4):connectorPortTypeIsDB25PinMale(5):connectorPortTypeIsDB25PinFemale(6):connectorPortTypeIsRJ11(7):connectorPortTypeIsRJ45(8):connectorPortTypeIsProprietary(9):connectorPortTypeIsCirdin8Male(10):connectorPortTypeIsCirdin8Female(11):connectorPortTypeIsMiniCentronics14(12):connectorPortTypeIsMiniCentronics26(13),1000.0080.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.8,MIB-Dell-10892::serial,OCTET,read-only,,mandatory,,1000.0080.0001.0008 This attribute defines the name of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.9,MIB-Dell-10892::is,Gauge32,read-only,,mandatory,,1000.0080.0001.0009 This attribute defines the maximum speed the serial
.1.3.6.1.4.1.674.10892.1.1000.80.1.10,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,other(1):unknown(2):xtorATCapable(4):c16450Capable(8):c16550Capable(16):c16550aCapable(32):c8251Capable(64):c8251FIFOCapable(128),1000.0080.0001.0010 This attribute defines the mode capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.80.1.11,MIB-Dell-10892::the,OCTET,read-only,,mandatory,,1000.0080.0001.0011 This attribute defines the base Input/Output address of
.1.3.6.1.4.1.674.10892.1.1000.80.1.12,MIB-Dell-10892::the,INTEGER,read-only,,mandatory,,1000.0080.0001.0012 This attribute defines the Interrupt Request Level of
.1.3.6.1.4.1.674.10892.1.1000.90,MIB-Dell-10892::uSBPortTable,,not-accessible,,mandatory,,1000.0090 This object defines the Universal Serial Bus (USB) Port Table.
.1.3.6.1.4.1.674.10892.1.1000.90.1,MIB-Dell-10892::uSBPortTableEntry,,not-accessible,uSBPortchassisIndex:uSBPortIndex,mandatory,,1000.0090.0001 This object defines the USB Port Table Entry.
.1.3.6.1.4.1.674.10892.1.1000.90.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1000.0090.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.90.1.2,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,,1000.0090.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1000.90.1.3,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1000.0090.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1000.90.1.4,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1000.0090.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1000.90.1.5,MIB-Dell-10892::uSBPortStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1000.0090.0001.0005 This attribute defines the status of the USB port.
.1.3.6.1.4.1.674.10892.1.1000.90.1.6,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,other(1):unknown(2):none(3):externalIsDisabled(4):externalIsEnabled(5):bootByPass(6),1000.0090.0001.0006 This attribute defines the security state of the
.1.3.6.1.4.1.674.10892.1.1000.90.1.7,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,connectorPortTypeIsOther(1):connectorPortTypeIsUnknown(2):connectorPortTypeIsUSB(3),1000.0090.0001.0007 This attribute defines the connector type of the
.1.3.6.1.4.1.674.10892.1.1000.90.1.8,MIB-Dell-10892::uSBPortName,OCTET,read-only,,mandatory,,1000.0090.0001.0008 This attribute defines name of the USB port.
.1.3.6.1.4.1.674.10892.1.1000.90.1.9,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,portConnectorTypeIsOther(1):portConnectorTypeIsNone(2):portConnectorTypeIsCentronics(3):portConnectorTypeIsMiniCentronics(4):portConnectorTypeIsProprietary(5):portConnectorTypeIsDB25Male(6):portConnectorTypeIsDB25Female(7):portConnectorTypeIsDB15Male(8):portConnectorTypeIsDB15Female(9):portConnectorTypeIsDB9Male(10):portConnectorTypeIsDB9Female(11):portConnectorTypeIsRJ11(12):portConnectorTypeIsRJ45(13):portConnectorTypeIsMiniSCSI50Pin(14):portConnectorTypeIsMiniDIN(15):portConnectorTypeIsMicroDIN(16):portConnectorTypeIsPS2(17):portConnectorTypeIsInfrared(18):portConnectorTypeIsHPHIL(19):portConnectorTypeIsAccessBussUSB(20):portConnectorTypeISSASCSI(21):portConnectorTypeIsCirdin8Male(22):portConnectorTypeIsCirdin8Female(23):portConnectorTypeIsIDE(24):portConnectorTypeIsFloppy(25):portConnectorTypeIsDIN9Pin(26):portConnectorTypeIsDIN25Pin(27):portConnectorTypeIsDIN50Pin(28):portConnectorTypeIsDIN68Pin(29):portConnectorTypeIsCDROMLineOut(30):portConnectorTypeIsMiniCentronics14(31):portConnectorTypeIsMiniCentronics26(32):portConnectorTypeIsMiniJack(33):portConnectorTypeIsBNC(34):portConnectorTypeIs1394(35):portConnectorTypeIsPC98(36):portConnectorTypeIsPC98Hireso(37):portConnectorTypeIsPCH98(38):portConnectorTypeIsPC98Note(39):portConnectorTypeIsPC98Full(40),1000.0090.0001.0009 This attribute defines the BIOS connector type of the
.1.3.6.1.4.1.674.10892.1.1100,MIB-Dell-10892::deviceGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1100.10,MIB-Dell-10892::pointingDeviceTable,,not-accessible,,mandatory,,1100.0010 This object defines the Pointing Device Table.
.1.3.6.1.4.1.674.10892.1.1100.10.1,MIB-Dell-10892::pointingDeviceTableEntry,,not-accessible,pointingDevicechassisIndex:pointingDeviceIndex,mandatory,,1100.0010.0001 This object defines the Pointing Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.10.1.2,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,,1100.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.10.1.3,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.10.1.4,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.10.1.5,MIB-Dell-10892::pointingDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0010.0001.0005 This attribute defines the status of the pointing device.
.1.3.6.1.4.1.674.10892.1.1100.10.1.6,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0010.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.10.1.7,MIB-Dell-10892::pointingDeviceType,INTEGER,read-only,,mandatory,deviceTypeIsOther(1):deviceTypeIsUnknown(2):deviceTypeIsAMouse(3):deviceTypeIsATrackBall(4):deviceTypeIsATrackPoint(5):deviceTypeIsAGlidePoint(6):deviceTypeIsATouchPad(7),1100.0010.0001.0007 This attribute defines the type of the pointing device.
.1.3.6.1.4.1.674.10892.1.1100.10.1.8,MIB-Dell-10892::pointing,INTEGER,read-only,,mandatory,,1100.0010.0001.0008 This attribute defines the number of buttons on the
.1.3.6.1.4.1.674.10892.1.1100.20,MIB-Dell-10892::keyboardDeviceTable,,not-accessible,,mandatory,,1100.0020 This object defines the Keyboard Device Table.
.1.3.6.1.4.1.674.10892.1.1100.20.1,MIB-Dell-10892::keyboardDeviceTableEntry,,not-accessible,keyboardDevicechassisIndex:keyboardDeviceIndex,mandatory,,1100.0020.0001 This object defines the Keyboard Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.20.1.2,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,,1100.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.20.1.3,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0020.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.20.1.4,MIB-Dell-10892::keyboard,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0020.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.20.1.5,MIB-Dell-10892::keyboardDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0020.0001.0005 This attribute defines the status of the keyboard device.
.1.3.6.1.4.1.674.10892.1.1100.20.1.6,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0020.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.20.1.7,MIB-Dell-10892::keyboardDeviceTypeName,OCTET,read-only,,mandatory,,1100.0020.0001.0007 This attribute defines the name of the keyboard device
.1.3.6.1.4.1.674.10892.1.1100.20.1.8,MIB-Dell-10892::keyboardDeviceLayoutName,OCTET,read-only,,mandatory,,1100.0020.0001.0008 This attribute defines the name of the keyboard device
.1.3.6.1.4.1.674.10892.1.1100.30,MIB-Dell-10892::processorDeviceTable,,not-accessible,,mandatory,,1100.0030 This object defines the Processor Device Table.
.1.3.6.1.4.1.674.10892.1.1100.30.1,MIB-Dell-10892::processorDeviceTableEntry,,not-accessible,processorDevicechassisIndex:processorDeviceIndex,mandatory,,1100.0030.0001 This object defines the Processor Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.2,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,,1100.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.3,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0030.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.4,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0030.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.5,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0030.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.6,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0030.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.7,MIB-Dell-10892::processorDeviceType,INTEGER,read-only,,mandatory,deviceTypeIsOther(1):deviceTypeIsUnknown(2):deviceTypeIsCPU(3):deviceTypeIsMathProcessor(4):deviceTypeIsDSP(5):deviceTypeIsAVideoProcessor(6),1100.0030.0001.0007 This attribute defines the type of the processor device.
.1.3.6.1.4.1.674.10892.1.1100.30.1.8,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1100.0030.0001.0008 This attribute defines the name of the manufacturer
.1.3.6.1.4.1.674.10892.1.1100.30.1.9,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,other(1):unknown(2):enabled(3):userDisabled(4):biosDisabled(5):idle(6),1100.0030.0001.0009 This attribute defines the status state of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.10,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,deviceFamilyIsOther(1):deviceFamilyIsUnknown(2):deviceFamilyIs8086(3):deviceFamilyIs80286(4):deviceFamilyIsIntel386(5):deviceFamilyIsIntel486(6):deviceFamilyIs8087(7):deviceFamilyIs80287(8):deviceFamilyIs80387(9):deviceFamilyIs80487(10):deviceFamilyIsPentium(11):deviceFamilyIsPentiumPro(12):deviceFamilyIsPentiumII(13):deviceFamilyIsPentiumMMX(14):deviceFamilyIsCeleron(15):deviceFamilyIsPentiumIIXeon(16):deviceFamilyIsPentiumIII(17):deviceFamilyIsPentiumIIIXeon(18):deviceFamilyIsPentiumIIISpeedStep(19):deviceFamilyIsItanium(20):deviceFamilyIsIntelXeon(21):deviceFamilyIsPentium4(22):deviceFamilyIsIntelXeonMP(23):deviceFamilyIsIntelItanium2(24):deviceFamilyIsK5(25):deviceFamilyIsK6(26):deviceFamilyIsK6-2(27):deviceFamilyIsK6-3(28):deviceFamilyIsAMDAthlon(29):deviceFamilyIsAMD2900(30):deviceFamilyIsK6-2Plus(31):deviceFamilyIsPowerPC(32):deviceFamilyIsPowerPC601(33):deviceFamilyIsPowerPC603(34):deviceFamilyIsPowerPC603Plus(35):deviceFamilyIsPowerPC604(36):deviceFamilyIsPowerPC620(37):deviceFamilyIsPowerPCx704(38):deviceFamilyIsPowerPC750(39):deviceFamilyIsIntelCoreDuo(40):deviceFamilyIsIntelCoreDuoMobile(41):deviceFamilyIsIntelCoreSoloMobile(42):deviceFamilyIsIntelAtom(43):deviceFamilyIsAlpha(48):deviceFamilyIsAlpha21064(49):deviceFamilyIsAlpha21066(50):deviceFamilyIsAlpha21164(51):deviceFamilyIsAlpha21164PC(52):deviceFamilyIsAlpha21164a(53):deviceFamilyIsAlpha21264(54):deviceFamilyIsAlpha21364(55):deviceFamilyIsAMDTurionIIUltraDualMobileM(56):deviceFamilyIsAMDTurionIIDualMobileM(57):deviceFamilyIsAMDAthlonIIDualMobileM(58):deviceFamilyIsAMDOpteron6100(59):deviceFamilyIsAMDOpteron4100(60):deviceFamilyIsAMDOpteron6200(61):deviceFamilyIsAMDOpteron4200(62):deviceFamilyIsMIPS(64):deviceFamilyIsMIPSR4000(65):deviceFamilyIsMIPSR4200(66):deviceFamilyIsMIPSR4400(67):deviceFamilyIsMIPSR4600(68):deviceFamilyIsMIPSR10000(69):deviceFamilyIsSPARC(80):deviceFamilyIsSuperSPARC(81):deviceFamilyIsmicroSPARCII(82):deviceFamilyIsmicroSPARCIIep(83):deviceFamilyIsUltraSPARC(84):deviceFamilyIsUltraSPARCII(85):deviceFamilyIsUltraSPARCIIi(86):deviceFamilyIsUltraSPARCIII(87):deviceFamilyIsUltraSPARCIIIi(88):deviceFamilyIs68040(96):deviceFamilyIs68xxx(97):deviceFamilyIs68000(98):deviceFamilyIs68010(99):deviceFamilyIs68020(100):deviceFamilyIs68030(101):deviceFamilyIsAMDZen(107):deviceFamilyIsHobbit(112):deviceFamilyIsCrusoeTM5000(120):deviceFamilyIsCrusoeTM3000(121):deviceFamilyIsEfficeonTM8000(122):deviceFamilyIsWeitek(128):deviceFamilyIsIntelCeleronM(130):deviceFamilyIsAMDAthlon64(131):deviceFamilyIsAMDOpteron(132):deviceFamilyIsAMDSempron(133):deviceFamilyIsAMDTurion64Mobile(134):deviceFamilyIsDualCoreAMDOpteron(135):deviceFamilyIsAMDAthlon64X2DualCore(136):deviceFamilyIsAMDTurion64X2Mobile(137):deviceFamilyIsQuadCoreAMDOpteron(138):deviceFamilyIsThirdGenerationAMDOpteron(139):deviceFamilyIsAMDPhenomFXQuadCore(140):deviceFamilyIsAMDPhenomX4QuadCore(141):deviceFamilyIsAMDPhenomX2DualCore(142):deviceFamilyIsAMDAthlonX2DualCore(143):deviceFamilyIsPA-RISC(144):deviceFamilyIsPA-RISC8500(145):deviceFamilyIsPA-RISC8000(146):deviceFamilyIsPA-RISC7300LC(147):deviceFamilyIsPA-RISC7200(148):deviceFamilyIsPA-RISC7100LC(149):deviceFamilyIsPA-RISC7100(150):deviceFamilyIsV30(160):deviceFamilyIsQuadCoreIntelXeon3200(161):deviceFamilyIsDualCoreIntelXeon3000(162):deviceFamilyIsQuadCoreIntelXeon5300(163):deviceFamilyIsDualCoreIntelXeon5100(164):deviceFamilyIsDualCoreIntelXeon5000(165):deviceFamilyIsDualCoreIntelXeonLV(166):deviceFamilyIsDualCoreIntelXeonULV(167):deviceFamilyIsDualCoreIntelXeon7100(168):deviceFamilyIsQuadCoreIntelXeon5400(169):deviceFamilyIsQuadCoreIntelXeon(170):deviceFamilyIsDualCoreIntelXeon5200(171):deviceFamilyIsDualCoreIntelXeon7200(172):deviceFamilyIsQuadCoreIntelXeon7300(173):deviceFamilyIsQuadCoreIntelXeon7400(174):deviceFamilyIsMultiCoreIntelXeon7400(175):deviceFamilyIsM1(176):deviceFamilyIsM2(177):deviceFamilyIsIntelPentium4HT(179):deviceFamilyIsAS400(180):deviceFamilyIsAMDAthlonXP(182):deviceFamilyIsAMDAthlonMP(183):deviceFamilyIsAMDDuron(184):deviceFamilyIsIntelPentiumM(185):deviceFamilyIsIntelCeleronD(186):deviceFamilyIsIntelPentiumD(187):deviceFamilyIsIntelPentiumExtreme(188):deviceFamilyIsIntelCoreSolo(189):deviceFamilyIsIntelCore2(190):deviceFamilyIsIntelCore2Duo(191):deviceFamilyIsIntelCore2Solo(192):deviceFamilyIsIntelCore2Extreme(193):deviceFamilyIsIntelCore2Quad(194):deviceFamilyIsIntelCore2ExtremeMobile(195):deviceFamilyIsIntelCore2DuoMobile(196):deviceFamilyIsIntelCore2SoloMobile(197):deviceFamilyIsIntelCorei7(198):deviceFamilyIsDualCoreIntelCeleron(199):deviceFamilyIsIBM390(200):deviceFamilyIsG4(201):deviceFamilyIsG5(202):deviceFamilyIsESA390G6(203):deviceFamilyIszArchitectur(204):deviceFamilyIsIntelCorei5(205):deviceFamilyIsIntelCorei3(206):deviceFamilyIsVIAC7-M(210):deviceFamilyIsVIAC7-D(211):deviceFamilyIsVIAC7(212):deviceFamilyIsVIAEden(213):deviceFamilyIsMultiCoreIntelXeon(214):deviceFamilyIsDualCoreIntelXeon3xxx(215):deviceFamilyIsQuadCoreIntelXeon3xxx(216):deviceFamilyIsVIANano(217):deviceFamilyIsDualCoreIntelXeon5xxx(218):deviceFamilyIsQuadCoreIntelXeon5xxx(219):deviceFamilyIsDualCoreIntelXeon7xxx(221):deviceFamilyIsQuadCoreIntelXeon7xxx(222):deviceFamilyIsMultiCoreIntelXeon7xxx(223):deviceFamilyIsMultiCoreIntelXeon3400(224):deviceFamilyIsEmbeddedAMDOpertonQuadCore(230):deviceFamilyIsAMDPhenomTripleCore(231):deviceFamilyIsAMDTurionUltraDualCoreMobile(232):deviceFamilyIsAMDTurionDualCoreMobile(233):deviceFamilyIsAMDAthlonDualCore(234):deviceFamilyIsAMDSempronSI(235):deviceFamilyIsAMDPhenomII(236):deviceFamilyIsAMDAthlonII(237):deviceFamilyIsSixCoreAMDOpteron(238):deviceFamilyIsAMDSempronM(239):deviceFamilyIsi860(250):deviceFamilyIsi960(251),1100.0030.0001.0010 This attribute defines the family of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.11,MIB-Dell-10892::processor,Gauge32,read-only,,mandatory,,1100.0030.0001.0011 This attribute defines the maximum speed of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.12,MIB-Dell-10892::processor,Gauge32,read-only,,mandatory,,1100.0030.0001.0012 This attribute defines the current speed of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.13,MIB-Dell-10892::the,Gauge32,read-only,,mandatory,,1100.0030.0001.0013 This attribute defines the speed of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.14,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,,1100.0030.0001.0014 This attribute defines the voltage powering the
.1.3.6.1.4.1.674.10892.1.1100.30.1.15,MIB-Dell-10892::information,INTEGER,read-only,,mandatory,processorUpgradeIsOther(1):processorUpgradeIsUnknown(2):processorUpgradeIsByDaughterBoard(3):processorUpgradeIsByZIFSocket(4):processorUpgradeIsByReplacement(5):processorUpgradeIsNone(6):processorUpgradeIsByLIFSocket(7):processorUpgradeIsBySlot1(8):processorUpgradeIsBySlot2(9):processorUpgradeIsBy370PinSocket(10):processorUpgradeIsBySlotA(11):processorUpgradeIsBySlotM(12):processorUpgradeIsByScoket423(13):processorUpgradeIsBySocketA(14):processorUpgradeIsBySocket478(15):processorUpgradeIsBySocket754(16):processorUpgradeIsBySocket940(17):processorUpgradeIsBySocket939(18):processorUpgradeIsBySocketmPGA604(19):processorUpgradeIsBySocketLGA771(20):processorUpgradeIsBySocketLGA775(21):processorUpgradeIsBySocketS1(22):processorUpgradeIsBySocketAM2(23):processorUpgradeIsBySocketF(24):processorUpgradeIsBySocketLGA1366(25),1100.0030.0001.0015 This attribute defines the processor upgrade
.1.3.6.1.4.1.674.10892.1.1100.30.1.16,MIB-Dell-10892::contains,OCTET,read-only,,mandatory,,1100.0030.0001.0016 This attribute defines the version of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.17,MIB-Dell-10892::detected,Gauge32,read-only,,mandatory,,1100.0030.0001.0017 This attribute defines the number of processor cores
.1.3.6.1.4.1.674.10892.1.1100.30.1.18,MIB-Dell-10892::enabled,Gauge32,read-only,,mandatory,,1100.0030.0001.0018 This attribute defines the number of processor cores
.1.3.6.1.4.1.674.10892.1.1100.30.1.19,MIB-Dell-10892::detected,Gauge32,read-only,,mandatory,,1100.0030.0001.0019 This attribute defines the number of processor threads
.1.3.6.1.4.1.674.10892.1.1100.30.1.20,MIB-Dell-10892::be,INTEGER,read-only,,mandatory,,1100.0030.0001.0020 This attribute defines characteristics of the Bit Position Meaning if Set -------- -------------- Bit 0 Reserved Bit 1 Unknown Bit 2 64-bit capable Bit 3-15 Reserved
.1.3.6.1.4.1.674.10892.1.1100.30.1.21,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,,1100.0030.0001.0021 This attribute defines extended capabilities of the Bit Position Meaning if Set -------- -------------- Bit 0 Virtualization Technology (VT) supported Bit 1 Demand-Based Switching (DBS) supported Bit 2 eXecute Disable (XD) supported Bit 3 Hyper-Threading (HT) supported
.1.3.6.1.4.1.674.10892.1.1100.30.1.22,MIB-Dell-10892::defined,INTEGER,read-only,,mandatory,,1100.0030.0001.0022 This attribute defines extended settings of the Bit Position Meaning if Set -------- -------------- Bit 0 Virtualization Technology (VT) enabled Bit 1 Demand Based Switching (DBS) enabled Bit 2 eXecute Disable (XD) enabled Bit 3 Hyper-Threading (HT) enabled
.1.3.6.1.4.1.674.10892.1.1100.30.1.23,MIB-Dell-10892::processor,OCTET,read-only,,mandatory,,1100.0030.0001.0023 This attribute defines the brand of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.24,MIB-Dell-10892::processor,OCTET,read-only,,mandatory,,1100.0030.0001.0024 This attribute defines the model of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.25,MIB-Dell-10892::processor,OCTET,read-only,,mandatory,,1100.0030.0001.0025 This attribute defines the stepping of the
.1.3.6.1.4.1.674.10892.1.1100.30.1.26,MIB-Dell-10892::not,INTEGER,read-only,,mandatory,,1100.0030.0001.0021 This attribute defines deprecated capabilities of the Bit Position Meaning if Set -------- -------------- Bit 0 Virtualization Technology (VT) is deprecated Bit 1 Demand-Based Switching (DBS) is deprecated Bit 2 eXecute Disable (XD) is deprecated Bit 3 Hyper-Threading (HT) is deprecated
.1.3.6.1.4.1.674.10892.1.1100.32,MIB-Dell-10892::processorDeviceStatusTable,,not-accessible,,mandatory,,1100.0032 This object defines the Processor Device Status Table.
.1.3.6.1.4.1.674.10892.1.1100.32.1,MIB-Dell-10892::processorDeviceStatusTableEntry,,not-accessible,processorDeviceStatusChassisIndex:processorDeviceStatusIndex,mandatory,,1100.0032.0001 This object defines the Processor Device Status Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.32.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0032.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.32.1.2,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,,1100.0032.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.32.1.3,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0032.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.32.1.4,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0032.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.32.1.5,MIB-Dell-10892::the,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0032.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1100.32.1.6,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,internalError(1):thermalTrip(2):configurationError(32):processorPresent(128):processorDisabled(256):terminatorPresent(512):processorThrottled(1024),1100.0032.0001.0006 This attribute defines the reading of the
.1.3.6.1.4.1.674.10892.1.1100.32.1.7,MIB-Dell-10892::processor,OCTET,read-only,,mandatory,,1100.0032.0001.0007 This attribute defines the location name of the
.1.3.6.1.4.1.674.10892.1.1100.32.1.8,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0032.0001.0008 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.40,MIB-Dell-10892::cacheDeviceTable,,not-accessible,,mandatory,,1100.0040 This object defines the Cache Device Table.
.1.3.6.1.4.1.674.10892.1.1100.40.1,MIB-Dell-10892::cacheDeviceTableEntry,,not-accessible,cacheDevicechassisIndex:cacheDeviceIndex,mandatory,,1100.0040.0001 This object defines the Cache Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.2,MIB-Dell-10892::cache,INTEGER,read-only,,mandatory,,1100.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.3,MIB-Dell-10892::cache,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0040.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.4,MIB-Dell-10892::cache,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0040.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.5,MIB-Dell-10892::cacheDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0040.0001.0005 This attribute defines the status of the cache device.
.1.3.6.1.4.1.674.10892.1.1100.40.1.6,MIB-Dell-10892::processor,INTEGER,read-only,,mandatory,,1100.0040.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.7,MIB-Dell-10892::cacheDeviceType,INTEGER,read-only,,mandatory,deviceTypeIsOther(1):deviceTypeIsUnknown(2):deviceTypeIsInstruction(3):deviceTypeIsData(4):deviceTypeIsUnified(5),1100.0040.0001.0007 This attribute defines the type of cache device.
.1.3.6.1.4.1.674.10892.1.1100.40.1.8,MIB-Dell-10892::cacheDeviceLocation,INTEGER,read-only,,mandatory,deviceLocationIsOther(1):deviceLocationIsUnknown(2):deviceLocationIsInternal(3):deviceLocationIsExternal(4),1100.0040.0001.0008 This attribute defines the location of the cache device.
.1.3.6.1.4.1.674.10892.1.1100.40.1.9,MIB-Dell-10892::cache,INTEGER,read-only,,mandatory,other(1):unknown(2):enabled(3):userDisabled(4):biosDisabled(5),1100.0040.0001.0009 This attribute defines the status state of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.10,MIB-Dell-10892::name,OCTET,read-only,,mandatory,,1100.0040.0001.0010 This attribute defines the name of the external socket
.1.3.6.1.4.1.674.10892.1.1100.40.1.11,MIB-Dell-10892::cacheDeviceLevel,INTEGER,read-only,,mandatory,deviceLevelIsOther(1):deviceLevelIsUnknown(2):deviceLevelIsPrimary(3):deviceLevelIsSecondary(4):deviceLevelIsTertiary(5),1100.0040.0001.0011 This attribute defines the level of the cache device.
.1.3.6.1.4.1.674.10892.1.1100.40.1.12,MIB-Dell-10892::cache,Gauge32,read-only,,mandatory,,1100.0040.0001.0012 This attribute defines the maximum size of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.13,MIB-Dell-10892::cache,Gauge32,read-only,,mandatory,,1100.0040.0001.0013 This attribute defines the current size of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.14,MIB-Dell-10892::cache,Gauge32,read-only,,mandatory,,1100.0040.0001.0014 This attribute defines the speed of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.15,MIB-Dell-10892::cache,INTEGER,read-only,,mandatory,deviceWritePolicyIsOther(1):deviceWritePolicyIsUnknown(2):deviceWritePolicyIsWriteBack(3):deviceWritePolicyIsWriteThrough(4):deviceWritePolicyIsVariesByAddress(5):deviceWritePolicyIsDeterminedByIO(6),1100.0040.0001.0015 This attribute defines the write policy of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.16,MIB-Dell-10892::socketed,INTEGER,read-only,,mandatory,,1100.0040.0001.0016 This attribute defines if the cache device is
.1.3.6.1.4.1.674.10892.1.1100.40.1.17,MIB-Dell-10892::in,INTEGER,read-only,,mandatory,deviceECCTypeIsOther(1):deviceECCTypeIsUnknown(2):deviceECCTypeIsNone(3):deviceECCTypeIsParity(4):deviceECCTypeIsSingleBitECC(5):deviceECCTypeIsMultiBitECC(6):deviceECCTypeIsCRC(7),1100.0040.0001.0017 This attribute defines the type of error correction
.1.3.6.1.4.1.674.10892.1.1100.40.1.18,MIB-Dell-10892::in,INTEGER,read-only,,mandatory,deviceAssociativityIsOther(1):deviceAssociativityIsUnknown(2):deviceAssociativityIsDirectMapped(3):deviceAssociativityIsTwoWaySetAssociative(4):deviceAssociativityIsFourWaySetAssociative(5):deviceAssociativityIsFullyAssociative(6):deviceAssociativityIsEightWaySetAssociative(7):deviceAssociativityIsSixteenWaySetAssociative(8):deviceAssociativityIs12WaySetAssociative(9):deviceAssociativityIs24WaySetAssociative(10):deviceAssociativityIs32WaySetAssociative(11):deviceAssociativityIs48WaySetAssociative(12):deviceAssociativityIs64WaySetAssociative(13),1100.0040.0001.0018 This attribute defines the type of associativity
.1.3.6.1.4.1.674.10892.1.1100.40.1.19,MIB-Dell-10892::cache,INTEGER,read-only,,mandatory,deviceSRAMTypeIsOther(1):deviceSRAMTypeIsUnknown(2):deviceSRAMTypeIsNonBurst(3):deviceSRAMTypeIsBurst(4):deviceSRAMTypeIsPipeBurst(5):deviceSRAMTypeIsSynchronous(6):deviceSRAMTypeIsAsynchronous(7),1100.0040.0001.0019 This attribute defines the supported SRAM type of the
.1.3.6.1.4.1.674.10892.1.1100.40.1.20,MIB-Dell-10892::cache,INTEGER,read-only,,mandatory,deviceSRAMTypeIsOther(1):deviceSRAMTypeIsUnknown(2):deviceSRAMTypeIsNonBurst(3):deviceSRAMTypeIsBurst(4):deviceSRAMTypeIsPipeBurst(5):deviceSRAMTypeIsSynchronous(6):deviceSRAMTypeIsAsynchronous(7),1100.0040.0001.0020 This attribute defines the current SRAM type of the
.1.3.6.1.4.1.674.10892.1.1100.50,MIB-Dell-10892::memoryDeviceTable,,not-accessible,,mandatory,,1100.0050 This object defines the Memory Device Table.
.1.3.6.1.4.1.674.10892.1.1100.50.1,MIB-Dell-10892::memoryDeviceTableEntry,,not-accessible,memoryDevicechassisIndex:memoryDeviceIndex,mandatory,,1100.0050.0001 This object defines the Memory Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.50.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.2,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,,1100.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.3,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0050.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.4,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0050.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.5,MIB-Dell-10892::memoryDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0050.0001.0005 This attribute defines the status of the memory device.
.1.3.6.1.4.1.674.10892.1.1100.50.1.6,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,,1100.0050.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.7,MIB-Dell-10892::memoryDeviceType,INTEGER,read-only,,mandatory,deviceTypeIsOther(1):deviceTypeIsUnknown(2):deviceTypeIsDRAM(3):deviceTypeIsEDRAM(4):deviceTypeIsVRAM(5):deviceTypeIsSRAM(6):deviceTypeIsRAM(7):deviceTypeIsROM(8):deviceTypeIsFLASH(9):deviceTypeIsEEPROM(10):deviceTypeIsFEPROM(11):deviceTypeIsEPROM(12):deviceTypeIsCDRAM(13):deviceTypeIs3DRAM(14):deviceTypeIsSDRAM(15):deviceTypeIsSGRAM(16):deviceTypeIsRDRAM(17):deviceTypeIsDDR(18):deviceTypeIsDDR2(19):deviceTypeIsDDR2FBDIMM(20):deviceTypeIsDDR3(24):deviceTypeIsFBD2(25):deviceTypeIsDDR4(26),1100.0050.0001.0007 This attribute defines the type of the memory device.
.1.3.6.1.4.1.674.10892.1.1100.50.1.8,MIB-Dell-10892::memoryDeviceLocationName,OCTET,read-only,,mandatory,,1100.0050.0001.0008 This attribute defines the location of the memory device.
.1.3.6.1.4.1.674.10892.1.1100.50.1.9,MIB-Dell-10892::The,INTEGER,read-only,,deprecated,,1100.0050.0001.0009 This attribute defines the total number of ECC corrections
.1.3.6.1.4.1.674.10892.1.1100.50.1.10,MIB-Dell-10892::memory,OCTET,read-only,,mandatory,,1100.0050.0001.0010 This attribute defines the location of the bank for the
.1.3.6.1.4.1.674.10892.1.1100.50.1.11,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,deviceTypeDetailIsOther(2):deviceTypeDetailIsUnknown(4):deviceTypeDetailIsFastPaged(8):deviceTypeDetailIsStaticColumn(16):deviceTypeDetailIsPseudoStatic(32):deviceTypeDetailIsRAMBUS(64):deviceTypeDetailIsSynchronous(128):deviceTypeDetailIsCMOS(256):deviceTypeDetailIsEDO(512):deviceTypeDetailIsWindowDRAM(1024):deviceTypeDetailIsCacheDRAM(2048):deviceTypeDetailIsNonVolatile(4096):deviceTypeDetailIsRegistered(8192):deviceTypeDetailIsNonRegistered(16384),1100.0050.0001.0011 This attribute defines the detailed type of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.12,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,deviceFormFactorIsOther(1):deviceFormFactorIsUnknown(2):deviceFormFactorIsSIMM(3):deviceFormFactorIsSIP(4):deviceFormFactorIsAChip(5):deviceFormFactorIsDIP(6):deviceFormFactorIsZIP(7):deviceFormFactorIsAProprietaryCard(8):deviceFormFactorIsDIMM(9):deviceFormFactorIsTSOP(10):deviceFormFactorIsARowOfChips(11):deviceFormFactorIsRIMM(12):deviceFormFactorIsSODIMM(13):deviceFormFactorIsSRIMM(14):deviceFormFactorIsFBDIMM(15),1100.0050.0001.0012 This attribute defines the form factor of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.13,MIB-Dell-10892::it,Gauge32,read-only,,mandatory,,1100.0050.0001.0013 This attribute defines if the memory device is a part
.1.3.6.1.4.1.674.10892.1.1100.50.1.14,MIB-Dell-10892::**NOTE:,Gauge32,read-only,,deprecated,,1100.0050.0001.0014 This attribute defines the size in KBytes of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.15,MIB-Dell-10892::of,Gauge32,read-only,,mandatory,,1100.0050.0001.0015 This attribute defines the speed in nanoseconds
.1.3.6.1.4.1.674.10892.1.1100.50.1.16,MIB-Dell-10892::an,Gauge32,read-only,,mandatory,,1100.0050.0001.0016 This attribute defines the total number bits,
.1.3.6.1.4.1.674.10892.1.1100.50.1.17,MIB-Dell-10892::used,Gauge32,read-only,,mandatory,,1100.0050.0001.0017 This attribute defines the total number of data bits
.1.3.6.1.4.1.674.10892.1.1100.50.1.18,MIB-Dell-10892::The,INTEGER,read-only,,deprecated,,1100.0050.0001.0018 This attribute defines the total number of single bit
.1.3.6.1.4.1.674.10892.1.1100.50.1.19,MIB-Dell-10892::The,INTEGER,read-only,,deprecated,,1100.0050.0001.0019 This attribute defines the total number of multibit
.1.3.6.1.4.1.674.10892.1.1100.50.1.20,MIB-Dell-10892::used,INTEGER,read-only,,mandatory,eccSingleBitCorrectionWarningRate(1):eccSingleBitCorrectionFailureRate(2):eccMultiBitFault(4):eccSingleBitCorrectionLoggingDisabled(8):deviceDisabledBySpareActivation(16):nvdimmNotReady(32):nvdimmSaveError(64):nvdimmRestoreErrorOrTimeout(128):nvdimmIllegalConfiguration(256):nvdimmNotResponding(512):nvdimmArmFailureOrTimeout(1024):nvdimmsInWriteProtectMode(2048):nvmLifetimeExpired(4096):nvdimmPersistencyLost(8192):nvdimmPersistencyRestored(16384):nvmLifetimeLessThanFivePercent(32768):aepUnCorrectableError(65536):aepCorrectableError(131072):aepOperatingNormally(262144),1100.0050.0001.0020 This attribute defines the failure modes of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.21,MIB-Dell-10892::memory,OCTET,read-only,,mandatory,,1100.0050.0001.0021 This attribute defines the manufacturer of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.22,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1100.0050.0001.0022 This attribute defines the manufacturer's part number
.1.3.6.1.4.1.674.10892.1.1100.50.1.23,MIB-Dell-10892::memory,OCTET,read-only,,mandatory,,1100.0050.0001.0023 This attribute defines the serial number of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.24,MIB-Dell-10892::memory,OCTET,read-only,,mandatory,,1100.0050.0001.0024 This attribute defines the asset tag of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.25,MIB-Dell-10892::in,OCTET,read-only,,mandatory,,1100.0050.0001.0025 This attribute defines the speed of the memory device
.1.3.6.1.4.1.674.10892.1.1100.50.1.26,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,deviceRankIsUnknown(1):deviceRankIsSingle(2):deviceRankIsDual(4):deviceRankIsQuad(8):deviceRankIsOctal(16):deviceRankIsHexa(32),1100.0050.0001.0026 This attribute defines the Rank
.1.3.6.1.4.1.674.10892.1.1100.50.1.27,MIB-Dell-10892::**NOTE:,Gauge32,read-only,,mandatory,,1100.0050.0001.0027 This attribute defines the size in MBytes of the
.1.3.6.1.4.1.674.10892.1.1100.50.1.28,MIB-Dell-10892::memoryDeviceMemoryTechnology,INTEGER,read-only,,mandatory,other(1):unknown(2):dram(3):nvdimm-n(4):nvdimm-f(5):nvdimm-p(6):intelpersistentmemory(7),1100.0050.0001.0028 This attribute defines the Memory technology type of the memory device.
.1.3.6.1.4.1.674.10892.1.1100.50.1.29,MIB-Dell-10892::memoryDeviceNonVolatileSize,Gauge32,read-only,,mandatory,,1100.0050.0001.0029 This attribute defines the size of the Non-volatile portion of the memory device in MegaBytes.
.1.3.6.1.4.1.674.10892.1.1100.50.1.30,MIB-Dell-10892::memoryDeviceVolatileSize,Gauge32,read-only,,mandatory,,1100.0050.0001.0030 This attribute defines the size of the Volatile portion of the memory device in MegaBytes.
.1.3.6.1.4.1.674.10892.1.1100.50.1.31,MIB-Dell-10892::memoryDeviceCacheSize,Gauge32,read-only,,mandatory,,1100.0050.0001.0031 This attribute defines the size of the Cache portion of the memory device in MegaBytes.
.1.3.6.1.4.1.674.10892.1.1100.50.1.32,MIB-Dell-10892::For,Gauge32,read-only,,mandatory,,1100.0050.0001.0032 This attribute defines the Remaining Rated Write Endurance of the memory device.
.1.3.6.1.4.1.674.10892.1.1100.60,MIB-Dell-10892::memoryDeviceMappedAddressTable,,not-accessible,,mandatory,,1100.0060 This object defines the Memory Device Mapped Address Table.
.1.3.6.1.4.1.674.10892.1.1100.60.1,MIB-Dell-10892::Table,,not-accessible,memoryDeviceMappedAddresschassisIndex:memoryDeviceMappedAddressIndex,mandatory,,1100.0060.0001 This object defines the Memory Device Mapped Address
.1.3.6.1.4.1.674.10892.1.1100.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.60.1.2,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,,1100.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.60.1.3,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0060.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.60.1.4,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0060.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.60.1.5,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0060.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1100.60.1.6,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,,1100.0060.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.60.1.7,MIB-Dell-10892::2,147,483,647,Gauge32,read-only,,mandatory,,1100.0060.0001.0007 This attribute defines the position of the referenced
.1.3.6.1.4.1.674.10892.1.1100.60.1.8,MIB-Dell-10892::2,147,483,647,Gauge32,read-only,,mandatory,,1100.0060.0001.0008 This attribute defines the position of the referenced
.1.3.6.1.4.1.674.10892.1.1100.60.1.9,MIB-Dell-10892::2,147,483,647,Gauge32,read-only,,mandatory,,1100.0060.0001.0009 This attribute defines the maximum number of
.1.3.6.1.4.1.674.10892.1.1100.60.1.10,MIB-Dell-10892::in,OCTET,read-only,,mandatory,,1100.0060.0001.0010 This attribute defines the physical starting address
.1.3.6.1.4.1.674.10892.1.1100.60.1.11,MIB-Dell-10892::in,OCTET,read-only,,mandatory,,1100.0060.0001.0011 This attribute defines the physical ending address
.1.3.6.1.4.1.674.10892.1.1100.70,MIB-Dell-10892::genericDeviceTable,,not-accessible,,mandatory,,1100.0070 This object defines the Generic Device Table.
.1.3.6.1.4.1.674.10892.1.1100.70.1,MIB-Dell-10892::genericDeviceTableEntry,,not-accessible,genericDevicechassisIndex:genericDeviceIndex,mandatory,,1100.0070.0001 This object defines the Generic Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.70.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0070.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.70.1.2,MIB-Dell-10892::generic,INTEGER,read-only,,mandatory,,1100.0070.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.70.1.3,MIB-Dell-10892::generic,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0070.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.70.1.4,MIB-Dell-10892::generic,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0070.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.70.1.5,MIB-Dell-10892::generic,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0070.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1100.70.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,1100.0070.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.70.1.7,MIB-Dell-10892::genericDeviceType,INTEGER,read-only,,mandatory,deviceTypeIsOther(1):deviceTypeIsUnknown(2):deviceTypeIsAVideoDevice(3):deviceTypeIsASCSIController(4):deviceTypeIsAnEthernetDevice(5):deviceTypeIsTokenRingDevice(6):deviceTypeIsASoundDevice(7),1100.0070.0001.0007 This attribute defines the type of the generic device.
.1.3.6.1.4.1.674.10892.1.1100.70.1.8,MIB-Dell-10892::genericDeviceName,OCTET,read-only,,mandatory,,1100.0070.0001.0008 This attribute defines the name of the generic device.
.1.3.6.1.4.1.674.10892.1.1100.80,MIB-Dell-10892::pCIDeviceTable,,not-accessible,,mandatory,,1100.0080 This object defines the PCI Device Table.
.1.3.6.1.4.1.674.10892.1.1100.80.1,MIB-Dell-10892::pCIDeviceTableEntry,,not-accessible,pCIDevicechassisIndex:pCIDeviceIndex,mandatory,,1100.0080.0001 This object defines the PCI Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.80.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0080.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.80.1.2,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,,1100.0080.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.80.1.3,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0080.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.80.1.4,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0080.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.80.1.5,MIB-Dell-10892::pCIDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0080.0001.0005 This attribute defines the status of the PCI device.
.1.3.6.1.4.1.674.10892.1.1100.80.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,1100.0080.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.80.1.7,MIB-Dell-10892::of,Gauge32,read-only,,mandatory,,1100.0080.0001.0007 This attribute defines the width of the data bus
.1.3.6.1.4.1.674.10892.1.1100.80.1.8,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1100.0080.0001.0008 This attribute defines the name of the manufacturer
.1.3.6.1.4.1.674.10892.1.1100.80.1.9,MIB-Dell-10892::pCIDeviceDescriptionName,OCTET,read-only,,mandatory,,1100.0080.0001.0009 This attribute defines the description of the PCI device.
.1.3.6.1.4.1.674.10892.1.1100.80.1.10,MIB-Dell-10892::PCI,Gauge32,read-only,,mandatory,,1100.0080.0001.0010 This attribute defines the bus speed in MHz of the
.1.3.6.1.4.1.674.10892.1.1100.80.1.11,MIB-Dell-10892::a,INTEGER,read-only,,mandatory,,1100.0080.0001.0011 This attribute defines if the PCI device has detected
.1.3.6.1.4.1.674.10892.1.1100.82,MIB-Dell-10892::pCIDeviceConfigurationSpaceTable,,not-accessible,,mandatory,,1100.0082 This object defines the PCI Device Configuration Space Table.
.1.3.6.1.4.1.674.10892.1.1100.82.1,MIB-Dell-10892::pCIDeviceConfigurationSpaceTableEntry,,not-accessible,pCIDeviceConfigurationSpacechassisIndex:pCIDeviceConfigurationSpaceIndex,mandatory,,1100.0082.0001 This object defines the PCI Device Configuration Space Table
.1.3.6.1.4.1.674.10892.1.1100.82.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1100.0082.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.2,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,,1100.0082.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.3,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0082.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.4,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0082.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.5,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0082.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.6,MIB-Dell-10892::PCI,INTEGER,read-only,,mandatory,,1100.0082.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.7,MIB-Dell-10892::PCI,Gauge32,read-only,,mandatory,,1100.0082.0001.0007 This attribute defines the bus number of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.8,MIB-Dell-10892::PCI,Gauge32,read-only,,mandatory,,1100.0082.0001.0008 This attribute defines the device number of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.9,MIB-Dell-10892::PCI,Gauge32,read-only,,mandatory,,1100.0082.0001.0009 This attribute defines the function number of the
.1.3.6.1.4.1.674.10892.1.1100.82.1.10,MIB-Dell-10892::PCI,OCTET,read-only,,mandatory,,1100.0082.0001.0010 This attribute defines the header of the
.1.3.6.1.4.1.674.10892.1.1100.90,MIB-Dell-10892::networkDeviceTable,,not-accessible,,mandatory,,1100.0090 This object defines the Network Device Table.
.1.3.6.1.4.1.674.10892.1.1100.90.1,MIB-Dell-10892::networkDeviceTableEntry,,not-accessible,networkDeviceChassisIndex:networkDeviceIndex,mandatory,,1100.0090.0001 This object defines the Network Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.90.1.1,MIB-Dell-10892::chassis,INTEGER,read-only,,mandatory,,1100.0090.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.2,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1100.0090.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.3,MIB-Dell-10892::networkDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0090.0001.0003 This attribute defines the status of the network device.
.1.3.6.1.4.1.674.10892.1.1100.90.1.4,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,connected(1):disconnected(2):driverBad(3):driverDisabled(4):hardwareInitalizing(10):hardwareResetting(11):hardwareClosing(12):hardwareNotReady(13),1100.0090.0001.0004 This attribute defines the connection status of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.5,MIB-Dell-10892::network,OCTET,read-only,,mandatory,,1100.0090.0001.0005 This attribute defines the description of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.6,MIB-Dell-10892::network,OCTET,read-only,,mandatory,,1100.0090.0001.0006 This attribute defines the product name of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.7,MIB-Dell-10892::network,OCTET,read-only,,mandatory,,1100.0090.0001.0007 This attribute defines the name of the vendor of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.8,MIB-Dell-10892::network,OCTET,read-only,,mandatory,,1100.0090.0001.0008 This attribute defines the service name of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.9,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1100.0090.0001.0009 This attribute defines the path to the binary image
.1.3.6.1.4.1.674.10892.1.1100.90.1.10,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1100.0090.0001.0010 This attribute defines the version of the driver
.1.3.6.1.4.1.674.10892.1.1100.90.1.11,MIB-Dell-10892::network,IpAddress,read-only,,mandatory,,1100.0090.0001.0011 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.12,MIB-Dell-10892::IP,IpAddress,read-only,,mandatory,,1100.0090.0001.0012 This attribute defines the IP subnet mask for the
.1.3.6.1.4.1.674.10892.1.1100.90.1.13,MIB-Dell-10892::default,IpAddress,read-only,,mandatory,,1100.0090.0001.0013 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.14,MIB-Dell-10892::if,IpAddress,read-only,,mandatory,,1100.0090.0001.0014 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.15,MIB-Dell-10892::network,OCTET,read-only,,mandatory,,1100.0090.0001.0015 This attribute defines the current MAC address of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.16,MIB-Dell-10892::network,OCTET,read-only,,mandatory,,1100.0090.0001.0016 This attribute defines the permanent MAC address of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.17,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1100.0090.0001.0017 This attribute defines the PCI bus number of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.18,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1100.0090.0001.0018 This attribute defines the PCI device number of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.19,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1100.0090.0001.0019 This attribute defines the PCI function number of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.20,MIB-Dell-10892::of,Gauge32,read-only,,mandatory,,1100.0090.0001.0020 This attribute defines the interrupt request number
.1.3.6.1.4.1.674.10892.1.1100.90.1.21,MIB-Dell-10892::address,Gauge32,read-only,,mandatory,,1100.0090.0001.0021 This attribute defines the base input/outport port
.1.3.6.1.4.1.674.10892.1.1100.90.1.22,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,noTeam(1):teamingEnabled(2):adapterFaultToleranceMode(4):loadBalancingMode(8),1100.0090.0001.0022 This attribute defines the teaming features of the
.1.3.6.1.4.1.674.10892.1.1100.90.1.23,MIB-Dell-10892::capability,INTEGER,read-only,,mandatory,unknown(1):available(2):notAvailable(4):cannotBeDetermined(8):driverNotResponding(16),1100.0090.0001.0023 This attribute defines the TCP/IP Offload Engine (TOE)
.1.3.6.1.4.1.674.10892.1.1100.90.1.24,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1100.0090.0001.0024 This attribute defines if TOE is enabled for the
.1.3.6.1.4.1.674.10892.1.1100.90.1.25,MIB-Dell-10892::(RDMA),INTEGER,read-only,,mandatory,unknown(1):available(2):notAvailable(4):cannotBeDetermined(8):driverNotResponding(16),1100.0090.0001.0025 This attribute defines the Remote Direct Memory Access
.1.3.6.1.4.1.674.10892.1.1100.90.1.26,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1100.0090.0001.0026 This attribute defines if RDMA is enabled for the
.1.3.6.1.4.1.674.10892.1.1100.90.1.27,MIB-Dell-10892::System,INTEGER,read-only,,mandatory,unknown(1):available(2):notAvailable(4):cannotBeDetermined(8):driverNotResponding(16),1100.0090.0001.0027 This attribute defines the Internet Small Computer
.1.3.6.1.4.1.674.10892.1.1100.90.1.28,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1100.0090.0001.0028 This attribute defines if iSCSI is enabled for the
.1.3.6.1.4.1.674.10892.1.1100.90.1.29,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,supported(1):toe(2):iscsiOffload(4):fcoeOffload(8):unknown(16),1100.0090.0001.0029 This attribute defines the capabilities of the network device.
.1.3.6.1.4.1.674.10892.1.1100.90.1.30,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,disabled(1):enabled(2):unknown(3),1100.0090.0001.0030 This attribute defines if NParEP mode is enabled for the
.1.3.6.1.4.1.674.10892.1.1100.100,MIB-Dell-10892::managedSystemServicesDeviceTable,,not-accessible,,mandatory,,1100.0100 This object defines the Managed System Services Device Table.
.1.3.6.1.4.1.674.10892.1.1100.100.1,MIB-Dell-10892::managedSystemServicesDeviceTableEntry,,not-accessible,managedSystemServicesDeviceChassisIndex:managedSystemServicesDeviceIndex,mandatory,,1100.0100.0001 This object defines the Managed System Services Device Table
.1.3.6.1.4.1.674.10892.1.1100.100.1.1,MIB-Dell-10892::chassis,INTEGER,read-only,,mandatory,,1100.0100.0001.0001 This attribute defines the index (one-based) of the
.1.3.6.1.4.1.674.10892.1.1100.100.1.2,MIB-Dell-10892::managed,INTEGER,read-only,,mandatory,,1100.0100.0001.0002 This attribute defines the index (one-based) of the
.1.3.6.1.4.1.674.10892.1.1100.100.1.3,MIB-Dell-10892::managed,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0100.0001.0003 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1100.100.1.4,MIB-Dell-10892::managed,INTEGER,read-only,,mandatory,optionalDevice(1),1100.0100.0001.0004 This attribute defines the type of the
.1.3.6.1.4.1.674.10892.1.1100.100.1.5,MIB-Dell-10892::on,INTEGER,read-only,,mandatory,,1100.0100.0001.0005 This attribute defines whether storage is present
.1.3.6.1.4.1.674.10892.1.1100.100.1.6,MIB-Dell-10892::of,Gauge32,read-only,,mandatory,,1100.0100.0001.0006 This attribute defines the size in MB (megabytes)
.1.3.6.1.4.1.674.10892.1.1100.110,MIB-Dell-10892::sdCardUnitTable,,not-accessible,,mandatory,,1100.0110 This object defines the SD Card Unit Table.
.1.3.6.1.4.1.674.10892.1.1100.110.1,MIB-Dell-10892::sdCardUnitTableEntry,,not-accessible,sdCardUnitChassisIndex:sdCardUnitIndex,mandatory,,1100.0110.0001 This object defines the SD Card Unit Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.110.1.1,MIB-Dell-10892::chassis,INTEGER,read-only,,mandatory,,1100.0110.0001.0001 This attribute defines the index (one-based) of the
.1.3.6.1.4.1.674.10892.1.1100.110.1.2,MIB-Dell-10892::SD,INTEGER,read-only,,mandatory,,1100.0110.0001.0002 This attribute defines the index (one-based) of the
.1.3.6.1.4.1.674.10892.1.1100.110.1.3,MIB-Dell-10892::SD,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0110.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1100.110.1.4,MIB-Dell-10892::SD,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0110.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1100.110.1.5,MIB-Dell-10892::SD,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),1100.0110.0001.0005 This attribute defines the redundancy status of the
.1.3.6.1.4.1.674.10892.1.1100.110.1.6,MIB-Dell-10892::devices,INTEGER,read-only,,mandatory,,1100.0110.0001.0006 This attribute defines the total number of SD Card
.1.3.6.1.4.1.674.10892.1.1100.110.1.7,MIB-Dell-10892::sdCardUnitName,OCTET,read-only,,mandatory,,1100.0110.0001.0007 This attribute defines the name of the SD Card unit.
.1.3.6.1.4.1.674.10892.1.1100.110.1.8,MIB-Dell-10892::sdCardUnitStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0110.0001.0008 This attribute defines the status of the SD Card unit.
.1.3.6.1.4.1.674.10892.1.1100.112,MIB-Dell-10892::sdCardDeviceTable,,not-accessible,,mandatory,,1100.0112 This object defines the SD Card Device Table.
.1.3.6.1.4.1.674.10892.1.1100.112.1,MIB-Dell-10892::sdCardDeviceTableEntry,,not-accessible,sdCardDeviceChassisIndex:sdCardDeviceIndex,mandatory,,1100.0112.0001 This object defines the SD Card Device Table Entry.
.1.3.6.1.4.1.674.10892.1.1100.112.1.1,MIB-Dell-10892::chassis,INTEGER,read-only,,mandatory,,1100.0112.0001.0001 This attribute defines the index (one-based) of the
.1.3.6.1.4.1.674.10892.1.1100.112.1.2,MIB-Dell-10892::SD,INTEGER,read-only,,mandatory,,1100.0112.0001.0002 This attribute defines the index (one-based) of the
.1.3.6.1.4.1.674.10892.1.1100.112.1.3,MIB-Dell-10892::sdCardDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1100.0112.0001.0003 This attribute defines the status of the SD Card device.
.1.3.6.1.4.1.674.10892.1.1100.112.1.4,MIB-Dell-10892::sdCardDeviceType,INTEGER,read-only,,mandatory,other(1):unknown(2):hypervisor(3):vFlash(4),1100.0112.0001.0004 This attribute defines the type of the SD Card device.
.1.3.6.1.4.1.674.10892.1.1100.112.1.5,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,sdCapable(1):vFlashCapable(2),1100.0112.0001.0005 This attribute defines the configuration capabilities
.1.3.6.1.4.1.674.10892.1.1100.112.1.6,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,sdEnabled(1):vFlashEnabled(2),1100.0112.0001.0006 This attribute defines the configuration settings
.1.3.6.1.4.1.674.10892.1.1100.112.1.7,MIB-Dell-10892::sdCardDeviceLocationName,OCTET,read-only,,mandatory,,1100.0112.0001.0007 This attribute defines the location of the SD Card device.
.1.3.6.1.4.1.674.10892.1.1100.112.1.8,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,,1100.0112.0001.0008 This attribute defines whether the SD card is present
.1.3.6.1.4.1.674.10892.1.1100.112.1.9,MIB-Dell-10892::sdCardDeviceCardState,INTEGER,read-only,,mandatory,present(1):ipmiReady(2):fullReady(4):offline(8):failed(16):active(32):bootable(64):writeProtect(128):standby(256),1100.0112.0001.0009 This attribute defines the state of the SD card.
.1.3.6.1.4.1.674.10892.1.1100.112.1.10,MIB-Dell-10892::of,Gauge32,read-only,,mandatory,,1100.0112.0001.0010 This attribute defines the total storage size in MB (megabytes)
.1.3.6.1.4.1.674.10892.1.1100.112.1.11,MIB-Dell-10892::SD,INTEGER,read-only,,mandatory,,1100.0112.0001.0011 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.1100.112.1.12,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,1100.0112.0001.0012 This attribute defines the available storage size in MB (megabytes)
.1.3.6.1.4.1.674.10892.1.1100.112.1.13,MIB-Dell-10892::by,INTEGER,read-only,,mandatory,licensed(1),1100.0112.0001.0013 This attribute defines whether the SD card is licensed
.1.3.6.1.4.1.674.10892.1.1200,MIB-Dell-10892::slotGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1200.10,MIB-Dell-10892::systemSlotTable,,not-accessible,,mandatory,,1200.0010 This object defines the System Slot Table.
.1.3.6.1.4.1.674.10892.1.1200.10.1,MIB-Dell-10892::systemSlotTableEntry,,not-accessible,systemSlotchassisIndex:systemSlotIndex,mandatory,,1200.0010.0001 This object defines the System Slot Table Entry.
.1.3.6.1.4.1.674.10892.1.1200.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1200.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1200.10.1.2,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,,1200.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1200.10.1.3,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,systemSlotHotPlugIsUnknown(1):systemSlotHotPlugIsHotPluggableCapable(2):systemSlotHotPlugCanBePoweredOn(4):systemSlotHotPlugCanSignalAttention(8):systemSlotHotPlugCanSignalPowerFault(16):systemSlotHotPlugCanSignalAdapterPresent(32):systemSlotHotPlugCanSignalPowerButtonPressed(64):canSupportAllHotPlugCapabilities(126):systemSlotCanProvide5Volts(128):systemSlotCanProvide3Point3Volts(256):systemSlotCanSignalIfShared(512):systemSlotCanSupportCard16(1024):systemSlotCanSupportCardBus(2048):systemSlotCanSupportZoomVideo(4096):systemSlotCanSupportModemRingResume(8192):systemSlotCanSupportPMESignal(16384):canSupportAllSlotCapabilities(32640):canSupportAllSlotAndAllHotPlugCapabilities(32766),1200.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1200.10.1.4,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,systemSlotHotPlugIsUnknown(1):systemSlotHotPlugIsHotPluggable(2):systemSlotHotPlugIsPoweredOn(4):systemSlotHotPlugIsAtAttention(8):systemSlotHotPlugHasPowerFaulted(16):systemSlotHotPlugAdapterIsPresent(32):systemSlotHotPlugAdapterPresentAndPoweredOn(36):systemSlotHotPlugPowerButtonPressed(64):systemSlotProvides5Volts(128):systemSlotProvides3Point3Volts(256):systemSlotIsShared(512):systemSlotSupportsCard16(1024):systemSlotSupportsCardBus(2048):systemSlotSupportsZoomVideo(4096):systemSlotSupportsModemRingResume(8192):systemSlotSupportsPMESignal(16384):supportsPMEand3P3Vand5VandHotPluggable(16770):supportsPMEand3P3Vand5VhasAdapterOn(16804):supportsPMEand3P3Vand5VhasAdapterOnandisHotPluggable(16806):supportsPMEand3P3VIsSharedand5VhasAdapterOnandHotPlugable(17316),1200.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1200.10.1.5,MIB-Dell-10892::systemSlotStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1200.0010.0001.0005 This attribute defines the status of the system slot.
.1.3.6.1.4.1.674.10892.1.1200.10.1.6,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,systemSlotUsageIsOther(1):systemSlotUsageIsUnknown(2):systemSlotUsageIsAvailable(3):systemSlotUsageIsInUse(4):systemSlotUsageIsUnAvailable(5),1200.0010.0001.0006 This attribute defines the current usage of the
.1.3.6.1.4.1.674.10892.1.1200.10.1.7,MIB-Dell-10892::systemSlotType,INTEGER,read-only,,mandatory,systemSlotIsOther(1):systemSlotIsUnknown(2):systemSlotIsISA(3):systemSlotIsMCA(4):systemSlotIsEISA(5):systemSlotIsPCI(6):systemSlotIsPCMCIA(7):systemSlotIsVLVESA(8):systemSlotIsProprietary(9):systemSlotIsProcessorCard(10):systemSlotIsProprietaryMemory(11):systemSlotIsIORiserCard(12):systemSlotIsNuBUS(13):systemSlotIsPCI66MHz(14):systemSlotIsAGP(15):systemSlotIsAGP2X(16):systemSlotIsAGP4X(17):systemSlotIsPCIX(18):systemSlotIsAGP8X(19):systemSlotIsM2Socket1DP(20):systemSlotIsM2Socket1SD(21):systemSlotIsM2Socket2(22):systemSlotIsM2Socket3(23):systemSlotIsMXMT1(24):systemSlotIsMXMT2(25):systemSlotIsMXMT3SC(26):systemSlotIsMXMT3HEC(27):systemSlotIsMXMT4(28):systemSlotIsMXM3TA(29):systemSlotIsMXM3TB(30):systemSlotIsPCIEGEN2SFF8639(31):systemSlotIsPCIEGEN3SFF8639(32):systemSlotIsPCIEMINI52PWBK(33):systemSlotIsPCIEMINI52PWOBK(34):systemSlotIsPCIEMINI76P(35):systemSlotIsPC98C20(160):systemSlotIsPC98C24(161):systemSlotIsPC98E(162):systemSlotIsPC98LocalBus(163):systemSlotIsPC98Card(164):systemSlotIsPCIExpress(165):systemSlotIsPCIExpressX1(166):systemSlotIsPCIExpressX2(167):systemSlotIsPCIExpressX4(168):systemSlotIsPCIExpressX8(169):systemSlotIsPCIExpressX16(170):systemSlotIsPCIExpressGen2(171):systemSlotIsPCIExpressGen2X1(172):systemSlotIsPCIExpressGen2X2(173):systemSlotIsPCIExpressGen2X4(174):systemSlotIsPCIExpressGen2X8(175):systemSlotIsPCIExpressGen2X16(176):systemSlotIsPCIExpressGen3(177):systemSlotIsPCIExpressGen3X1(178):systemSlotIsPCIExpressGen3X2(179):systemSlotIsPCIExpressGen3X4(180):systemSlotIsPCIExpressGen3X8(181):systemSlotIsPCIExpressGen3X16(182):systemSlotIsPCIExpressGen4(184):systemSlotIsPCIExpressGen4X1(185):systemSlotIsPCIExpressGen4X2(186):systemSlotIsPCIExpressGen4X4(187):systemSlotIsPCIExpressGen4X8(188):systemSlotIsPCIExpressGen4X16(189),1200.0010.0001.0007 This attribute defines the type of the system slot.
.1.3.6.1.4.1.674.10892.1.1200.10.1.8,MIB-Dell-10892::connector,OCTET,read-only,,mandatory,,1200.0010.0001.0008 This attribute defines the name of the external
.1.3.6.1.4.1.674.10892.1.1200.10.1.9,MIB-Dell-10892::systemSlotLength,INTEGER,read-only,,mandatory,systemSlotLengthIsOther(1):systemSlotLengthIsUnknown(2):systemSlotLengthIsShort(3):systemSlotLengthIsLong(4):systemSlotLengthIs25dff(5):systemSlotLengthIs35dff(6),1200.0010.0001.0009 This attribute defines the length of the system slot.
.1.3.6.1.4.1.674.10892.1.1200.10.1.10,MIB-Dell-10892::of,Gauge32,read-only,,mandatory,,1200.0010.0001.0010 This attribute defines the slot identification number
.1.3.6.1.4.1.674.10892.1.1200.10.1.11,MIB-Dell-10892::systemSlotCategory,INTEGER,read-only,,mandatory,systemSlotCategoryIsOther(1):systemSlotCategoryIsUnknown(2):systemSlotCategoryIsBusConnector(3):systemSlotCategoryIsPCMCIA(4):systemSlotCategoryIsMotherboard(5),1200.0010.0001.0011 This attribute defines the category of the system slot.
.1.3.6.1.4.1.674.10892.1.1200.10.1.12,MIB-Dell-10892::system,INTEGER,read-only,,mandatory,busWidthIsOther(1):busWidthIsUnknown(2):busWidthIs8bits(3):busWidthIs16bits(4):busWidthIs32bits(5):busWidthIs64bits(6):busWidthIs128bits(7):busWidthIs1xOrx1(8):busWidthIs2xOrx2(9):busWidthIs4xOrx4(10):busWidthIs8xOrx8(11):busWidthIs12xOrx12(12):busWidthIs16xOrx16(13):busWidthIs32xOrx32(14),1200.0010.0001.0012 This attribute defines the bus width of the hot plug
.1.3.6.1.4.1.674.10892.1.1200.10.1.13,MIB-Dell-10892::hot,Gauge32,read-only,,mandatory,,1200.0010.0001.0013 This attribute defines the slot speed in MHz of the
.1.3.6.1.4.1.674.10892.1.1200.10.1.14,MIB-Dell-10892::hot,Gauge32,read-only,,mandatory,,1200.0010.0001.0014 This attribute defines the adapter speed in MHz of the
.1.3.6.1.4.1.674.10892.1.1300,MIB-Dell-10892::memoryGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1300.10,MIB-Dell-10892::physicalMemoryArrayTable,,not-accessible,,mandatory,,1300.0010 This object defines the Physical Memory Array Table.
.1.3.6.1.4.1.674.10892.1.1300.10.1,MIB-Dell-10892::physicalMemoryArrayTableEntry,,not-accessible,physicalMemoryArraychassisIndex:physicalMemoryArrayIndex,mandatory,,1300.0010.0001 This object defines the Physical Memory Array Table Entry.
.1.3.6.1.4.1.674.10892.1.1300.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1300.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.10.1.2,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,,1300.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.10.1.3,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1300.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1300.10.1.4,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1300.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1300.10.1.5,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1300.0010.0001.0005 This attribute defines the status of the physical
.1.3.6.1.4.1.674.10892.1.1300.10.1.6,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,memoryArrayUseIsOther(1):memoryArrayUseIsUnknown(2):memoryArrayUseIsSystemMemory(3):memoryArrayUseIsVideoMemory(4):memoryArrayUseIsFLASHMemory(5):memoryArrayUseIsNonVolatileRAMMemory(6):memoryArrayUseIsCacheMemory(7),1300.0010.0001.0006 This attribute defines the use of the physical
.1.3.6.1.4.1.674.10892.1.1300.10.1.7,MIB-Dell-10892::by,INTEGER,read-only,,mandatory,memoryArrayECCTypeIsOther(1):memoryArrayECCTypeIsUnknown(2):memoryArrayECCTypeIsNone(3):memoryArrayECCTypeIsParity(4):memoryArrayECCTypeIsSingleBitECC(5):memoryArrayECCTypeIsMultiBitECC(6):memoryArrayECCTypeIsCRC(7),1300.0010.0001.0007 This attribute defines the error correction type used
.1.3.6.1.4.1.674.10892.1.1300.10.1.8,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,memoryArrayLocationIsOther(1):memoryArrayLocationIsUnknown(2):memoryArrayLocationIsSystemOrMotherboard(3):memoryArrayLocationIsISA(4):memoryArrayLocationIsEISA(5):memoryArrayLocationIsPCI(6):memoryArrayLocationIsMCA(7):memoryArrayLocationIsPCMCIA(8):memoryArrayLocationIsProprietary(9):memoryArrayLocationIsNUBUS(10):memoryArrayLocationIsPC98C20(11):memoryArrayLocationIsPC98C24(12):memoryArrayLocationIsPC98E(13):memoryArrayLocationIsPC98LocalBus(14):memoryArrayLocationIsPC98Card(15),1300.0010.0001.0008 This attribute defines the location of the physical
.1.3.6.1.4.1.674.10892.1.1300.10.1.9,MIB-Dell-10892::**NOTE:,Gauge32,read-only,,deprecated,,1300.0010.0001.0009 This attribute defines the maximum size in KBytes
.1.3.6.1.4.1.674.10892.1.1300.10.1.10,MIB-Dell-10892::an,Gauge32,read-only,,mandatory,,1300.0010.0001.0010 This attribute defines the total number of memory
.1.3.6.1.4.1.674.10892.1.1300.10.1.11,MIB-Dell-10892::an,Gauge32,read-only,,mandatory,,1300.0010.0001.0011 This attribute defines the total number of memory
.1.3.6.1.4.1.674.10892.1.1300.10.1.12,MIB-Dell-10892::representing,INTEGER,read-only,,mandatory,,1300.0010.0001.0012 This attribute defines the value of the physical
.1.3.6.1.4.1.674.10892.1.1300.10.1.13,MIB-Dell-10892::representing,INTEGER,read-only,,mandatory,,1300.0010.0001.00013 This attribute defines the value of the physical
.1.3.6.1.4.1.674.10892.1.1300.10.1.14,MIB-Dell-10892::representing,INTEGER,read-only,,mandatory,,1300.0010.0001.00014 This attribute defines the value of the physical
.1.3.6.1.4.1.674.10892.1.1300.10.1.15,MIB-Dell-10892::memory,INTEGER,read-only,,mandatory,,1300.0010.0001.0015 This attribute defines the index to the associated
.1.3.6.1.4.1.674.10892.1.1300.10.1.16,MIB-Dell-10892::**NOTE:,OCTET,read-only,,mandatory,,1300.0010.0001.0016 This attribute defines the maximum size in Bytes
.1.3.6.1.4.1.674.10892.1.1300.20,MIB-Dell-10892::physicalMemoryArrayMappedTable,,not-accessible,,mandatory,,1300.0020 This object defines the Physical Memory Array Mapped Table.
.1.3.6.1.4.1.674.10892.1.1300.20.1,MIB-Dell-10892::Table,,not-accessible,physicalMemoryArrayMappedchassisIndex:physicalMemoryArrayMappedIndex,mandatory,,1300.0020.0001 This object defines the Physical Memory Array Mapped
.1.3.6.1.4.1.674.10892.1.1300.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1300.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.20.1.2,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,,1300.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.20.1.3,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1300.0020.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1300.20.1.4,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1300.0020.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1300.20.1.5,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1300.0020.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1300.20.1.6,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1300.0020.0001.0006 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.20.1.7,MIB-Dell-10892::in,OCTET,read-only,,mandatory,,1300.0020.0001.0007 This attribute defines the physical starting address
.1.3.6.1.4.1.674.10892.1.1300.20.1.8,MIB-Dell-10892::in,OCTET,read-only,,mandatory,,1300.0020.0001.0008 This attribute defines the physical ending address
.1.3.6.1.4.1.674.10892.1.1300.20.1.9,MIB-Dell-10892::indicates,Gauge32,read-only,,mandatory,,1300.0020.0001.0009 This attribute defines the number of memory devices
.1.3.6.1.4.1.674.10892.1.1300.30,MIB-Dell-10892::physicalMemoryConfigTable,,not-accessible,,mandatory,,1300.0030 This object defines the Physical Memory Configuration Table.
.1.3.6.1.4.1.674.10892.1.1300.30.1,MIB-Dell-10892::Table,,not-accessible,physicalMemoryConfigChassisIndex:physicalMemoryConfigIndex,mandatory,,1300.0030.0001 This object defines the Physical Memory Configuration
.1.3.6.1.4.1.674.10892.1.1300.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1300.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.30.1.2,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,,1300.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.30.1.3,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4),1300.0030.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1300.30.1.4,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):redundantMemoryIsActive(8):enabledAndRedundantMemoryIsActive(10),1300.0030.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1300.30.1.5,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1300.0030.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1300.30.1.6,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknownCapabilities(1):spareCapable(2):mirrorCapable(4):spareAndMirrorCapable(6):raidCapable(8):dddcCapable(16),1300.0030.0001.0006 This attribute defines the redundant capabilities of the
.1.3.6.1.4.1.674.10892.1.1300.30.1.7,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknown(1):spareEnabled(2):mirrorEnabled(4):raidEnabled(8):dddcEnabled(16),1300.0030.0001.0007 This attribute defines the redundant settings of the
.1.3.6.1.4.1.674.10892.1.1300.30.1.8,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):momOptimizerCapable(2):momSpareCapable(4):momMirrorCapable(8):momAdvancedECCCapable(16),1300.0030.0001.0008 This attribute defines the Memory Operating Mode capabilities
.1.3.6.1.4.1.674.10892.1.1300.30.1.9,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):momOptimizerEnabled(2):momSpareEnabled(4):momMirrorEnabled(8):momAdvancedECCEnabled(16),1300.0030.0001.0009 This attribute defines the Memory Operating Mode settings
.1.3.6.1.4.1.674.10892.1.1300.40,MIB-Dell-10892::physicalMemoryLoggingTable,,not-accessible,,mandatory,,1300.0040 This object defines the Physical Memory Logging Table.
.1.3.6.1.4.1.674.10892.1.1300.40.1,MIB-Dell-10892::physicalMemoryLoggingTableEntry,,not-accessible,physicalMemoryLoggingChassisIndex:physicalMemoryLoggingIndex,mandatory,,1300.0040.0001 This object defines the Physical Memory Logging Table Entry.
.1.3.6.1.4.1.674.10892.1.1300.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1300.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.40.1.2,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,,1300.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.40.1.3,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2),1300.0040.0001.0003 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.1300.40.1.4,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknown(1):enabled(2),1300.0040.0001.0004 This attribute defines the settings of the
.1.3.6.1.4.1.674.10892.1.1300.40.1.5,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1300.0040.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1300.50,MIB-Dell-10892::redundantMemoryUnitTable,,not-accessible,,mandatory,,1300.0050 This object defines the Redundant Memory Unit Table.
.1.3.6.1.4.1.674.10892.1.1300.50.1,MIB-Dell-10892::redundantMemoryUnitTableEntry,,not-accessible,redundantMemoryUnitChassisIndex:redundantMemoryUnitIndex,mandatory,,1300.0050.0001 This object defines the Redundant Memory Unit Table Entry.
.1.3.6.1.4.1.674.10892.1.1300.50.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1300.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.50.1.2,MIB-Dell-10892::redundant,INTEGER,read-only,,mandatory,,1300.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.50.1.3,MIB-Dell-10892::redundant,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1300.0050.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1300.50.1.4,MIB-Dell-10892::redundant,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1300.0050.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1300.50.1.5,MIB-Dell-10892::redundant,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),1300.0050.0001.0005 This attribute defines the redundancy status of the
.1.3.6.1.4.1.674.10892.1.1300.50.1.6,MIB-Dell-10892::redundant,OCTET,read-only,,mandatory,,1300.0050.0001.0006 This attribute defines the name of the
.1.3.6.1.4.1.674.10892.1.1300.50.1.7,MIB-Dell-10892::redundant,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1300.0050.0001.0007 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1300.60,MIB-Dell-10892::physicalMemoryCardTable,,not-accessible,,mandatory,,1300.0060 This object defines the Physical Memory Card Table.
.1.3.6.1.4.1.674.10892.1.1300.60.1,MIB-Dell-10892::physicalMemoryCardTableEntry,,not-accessible,physicalMemoryCardChassisIndex:physicalMemoryCardIndex,mandatory,,1300.0060.0001 This object defines the Physical Memory Card Table Entry.
.1.3.6.1.4.1.674.10892.1.1300.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1300.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.60.1.2,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,,1300.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1300.60.1.3,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1300.0060.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1300.60.1.4,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1300.0060.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1300.60.1.5,MIB-Dell-10892::physical,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1300.0060.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1300.60.1.6,MIB-Dell-10892::physical,OCTET,read-only,,mandatory,,1300.0060.0001.0006 This attribute defines the name of the
.1.3.6.1.4.1.674.10892.1.1300.60.1.7,MIB-Dell-10892::an,Gauge32,read-only,,mandatory,,1300.0060.0001.0007 This attribute defines the total number of memory
.1.3.6.1.4.1.674.10892.1.1300.60.1.8,MIB-Dell-10892::2,147,483,647,Gauge32,read-only,,mandatory,,1300.0060.0001.0008 This attribute defines the number of memory
.1.3.6.1.4.1.674.10892.1.1300.60.1.9,MIB-Dell-10892::same,INTEGER,read-only,,mandatory,,1300.0060.0001.0009 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400,MIB-Dell-10892::biosSetUpControlGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1400.10,MIB-Dell-10892::biosSetUpControlTable,,not-accessible,,mandatory,,1400.0010 This object defines the BIOS Setup Control Table.
.1.3.6.1.4.1.674.10892.1.1400.10.1,MIB-Dell-10892::biosSetUpControlTableEntry,,not-accessible,biosSetUpControlchassisIndex,mandatory,,1400.0010.0001 This object defines the BIOS Setup Control Table Entry.
.1.3.6.1.4.1.674.10892.1.1400.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.10.1.2,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1400.0010.0001.0002 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.3,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1400.0010.0001.0003 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.4,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0004 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.5,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0005 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.10.1.6,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1400.0010.0001.0006 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.7,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1400.0010.0001.0007 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.8,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0008 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.9,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0009 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.10.1.10,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1400.0010.0001.0010 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.11,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1400.0010.0001.0011 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.12,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0012 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.13,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0013 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.10.1.14,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):enableCapable(2):lowCapable(4):mediumCapable(8):highCapable(16):allVolumeCapable(30),1400.0010.0001.0014 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.15,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):enabled(2):low(4):medium(8):high(16),1400.0010.0001.0015 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.16,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0016 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.17,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0017 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.10.1.18,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):enableCapable(2):addInCardCapable(4):onBoardCapable(8):bothCapable(14),1400.0010.0001.0018 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.19,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):enabled(2):addInCard(4):onBoard(8):addInCardOrOnBoard(12),1400.0010.0001.0019 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.20,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0020 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.21,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0021 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.10.1.22,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,bootSequenceUnknown(1):bootFromDisketteFirstCapable(2):bootFromHardDriveFirstCapable(4):bootFromDisketteORHardDriveFirstCapable(6):bootFromDeviceListCapable(8):bootFromCDROMFirstCapable(16):allFirstCapable(30),1400.0010.0001.0022 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.23,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,bootSequenceUnknown(1):bootFromDisketteFirst(2):bootFromHardDriveFirst(4):bootFromDeviceList(8):bootFromCDROMFirst(16),1400.0010.0001.0023 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.24,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0024 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.25,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0025 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.10.1.26,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,passwordControlCapabilitiesUnknown(1):passwordControlEnableCapable(2):passwordControlJumperDisableCapable(4):passwordControlEnableAndJumperDisableCapable(6),1400.0010.0001.0026 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.27,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,passwordControlSettingsUnknown(1):passwordControlEnabled(2):passwordControlJumperDisabled(4),1400.0010.0001.0027 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.28,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0028 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.29,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0029 This attribute defines the BIOS setup control value
.1.3.6.1.4.1.674.10892.1.1400.10.1.30,MIB-Dell-10892::done,OCTET,read-only,,mandatory,,1400.0010.0001.0030 This attribute defines the BIOS setup control value
.1.3.6.1.4.1.674.10892.1.1400.10.1.31,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,passwordControlCapabilitiesUnknown(1):passwordControlEnableCapable(2):passwordControlJumperDisableCapable(4):passwordControlEnableAndJumperDisableCapable(6),1400.0010.0001.0031 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.32,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,passwordControlSettingsUnknown(1):passwordControlEnabled(2):passwordControlJumperDisabled(4),1400.0010.0001.0032 This attribute defines the BIOS setup control settings
.1.3.6.1.4.1.674.10892.1.1400.10.1.33,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0033 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.34,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0034 This attribute defines the BIOS setup control value
.1.3.6.1.4.1.674.10892.1.1400.10.1.35,MIB-Dell-10892::current,OCTET,read-only,,mandatory,,1400.0010.0001.0035 This attribute defines the BIOS setup control value
.1.3.6.1.4.1.674.10892.1.1400.10.1.36,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,offCapable(1):onWithPrebootMeasurementsCapable(2):onWithoutPrebootMeasurementsCapable(4),1400.0010.0001.0036 This attribute defines the BIOS setup control capabilities
.1.3.6.1.4.1.674.10892.1.1400.10.1.37,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,onWithPrebootMeasurements(1):onWithoutPrebootMeasurements(2),1400.0010.0001.0037 This attribute defines the BIOS setup control setting
.1.3.6.1.4.1.674.10892.1.1400.10.1.38,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0010.0001.0038 This attribute defines the BIOS setup control status
.1.3.6.1.4.1.674.10892.1.1400.10.1.39,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0010.0001.0039 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.20,MIB-Dell-10892::Control,,not-accessible,,mandatory,,1400.0020 This object defines the Small Computer Systems Interface (SCSI)
.1.3.6.1.4.1.674.10892.1.1400.20.1,MIB-Dell-10892::Control,,not-accessible,sCSIControlchassisIndex:sCSIControlIndex,mandatory,,1400.0020.0001 This object defines the Small Computer Systems Interface (SCSI)
.1.3.6.1.4.1.674.10892.1.1400.20.1.1,MIB-Dell-10892::assoicated,INTEGER,read-only,,mandatory,,1400.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.20.1.2,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,,1400.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.20.1.3,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1400.0020.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.20.1.4,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1400.0020.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1400.20.1.5,MIB-Dell-10892::SCSI,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0020.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1400.20.1.6,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0020.0001.0006 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.30,MIB-Dell-10892::parallelPortControlTable,,not-accessible,,mandatory,,1400.0030 This object defines the Parallel Port Control Table.
.1.3.6.1.4.1.674.10892.1.1400.30.1,MIB-Dell-10892::parallelPortControlTableEntry,,not-accessible,parallelPortControlchassisIndex:parallelPortControlIndex,mandatory,,1400.0030.0001 This object defines the Parallel Port Control Table Entry.
.1.3.6.1.4.1.674.10892.1.1400.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.30.1.2,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,,1400.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.30.1.3,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,unknown(1):enableCapable(2):lpt1Capable(4):lpt1andEnableCapable(6):lpt2Capable(8):lpt2andEnableCapable(10):lpt3Capable(16):lpt3andEnableCapable(18):allParallelPortCapable(30),1400.0030.0001.0003 This attribute defines the port capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.30.1.4,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,unknown(1):enabled(2):lpt1(4):lpt1Enabled(6):lpt2(8):lpt2Enabled(10):lpt3(16):lpt3Enabled(18),1400.0030.0001.0004 This attribute defines the port settings of the
.1.3.6.1.4.1.674.10892.1.1400.30.1.5,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0030.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1400.30.1.6,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0030.0001.0006 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.30.1.7,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,unknown(1):atCapable(2):ps2Capable(4):atAndPS2Capable(6):ecpCapable(8):eppCapable(16):allModeCapable(30),1400.0030.0001.0007 This attribute defines the mode capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.30.1.8,MIB-Dell-10892::parallel,INTEGER,read-only,,mandatory,unknown(1):atModeEnabled(2):ps2ModeEnabled(4):ecpModeEnabled(8):eppModeEnabled(16),1400.0030.0001.0008 This attribute defines the mode settings of the
.1.3.6.1.4.1.674.10892.1.1400.40,MIB-Dell-10892::serialPortControlTable,,not-accessible,,mandatory,,1400.0040 This object defines the Serial Port Control Table.
.1.3.6.1.4.1.674.10892.1.1400.40.1,MIB-Dell-10892::serialPortControlTableEntry,,not-accessible,serialPortControlchassisIndex:serialPortControlIndex,mandatory,,1400.0040.0001 This object defines the Serial Port Control Table Entry.
.1.3.6.1.4.1.674.10892.1.1400.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.40.1.2,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,,1400.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.40.1.3,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,unknown(1):enableCapable(2):com1Capable(4):enableAndCom1Capable(6):com2Capable(8):enableAndCom2Capable(10):com3Capable(16):enableAndCom3Capable(18):com4Capable(32):enableAndCom4Capable(34):autoConfigCapable(64):com1OrCom3CapableAndAutoConfigCapable(86):com2OrCom4CapableAndAutoConfigCapable(106):allcomCapable(126),1400.0040.0001.0003 This attribute defines the port capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.40.1.4,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,unknown(1):enabled(2):com1(4):com1Enabled(6):com2(8):com2Enabled(10):com3(16):com3Enabled(18):com4(32):com4Enabled(34):comPortsAutoConfig(64):enabledAndAutoConfig(66),1400.0040.0001.0004 This attribute defines the port settings of the
.1.3.6.1.4.1.674.10892.1.1400.40.1.5,MIB-Dell-10892::serial,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0040.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1400.40.1.6,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0040.0001.0006 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.50,MIB-Dell-10892::usbControlTable,,not-accessible,,mandatory,,1400.0050 This object defines the Universal Serial Bus (USB) Control Table.
.1.3.6.1.4.1.674.10892.1.1400.50.1,MIB-Dell-10892::Table,,not-accessible,usbControlchassisIndex:usbControlIndex,mandatory,,1400.0050.0001 This object defines the Universal Serial Bus (USB) Control
.1.3.6.1.4.1.674.10892.1.1400.50.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.50.1.2,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,,1400.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.50.1.3,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1400.0050.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.50.1.4,MIB-Dell-10892::USB,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1400.0050.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1400.50.1.5,MIB-Dell-10892::usbControlStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0050.0001.0005 This attribute defines the status of the USB control.
.1.3.6.1.4.1.674.10892.1.1400.50.1.6,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0050.0001.0006 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.60,MIB-Dell-10892::Control,,not-accessible,,mandatory,,1400.0060 This object defines the Integrated Device Electronics (IDE)
.1.3.6.1.4.1.674.10892.1.1400.60.1,MIB-Dell-10892::Control,,not-accessible,ideControlchassisIndex:ideControlIndex,mandatory,,1400.0060.0001 This object defines the Integrated Device Electronics (IDE)
.1.3.6.1.4.1.674.10892.1.1400.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.60.1.2,MIB-Dell-10892::IDE,INTEGER,read-only,,mandatory,,1400.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.60.1.3,MIB-Dell-10892::IDE,INTEGER,read-only,,mandatory,unknown(1):ideControlAutoConfigOrEnableCapable(2),1400.0060.0001.0003 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.60.1.4,MIB-Dell-10892::IDE,INTEGER,read-only,,mandatory,unknown(1):ideControlAutoConfigEnabledOrEnabled(2),1400.0060.0001.0004 This attribute defines the settings of the
.1.3.6.1.4.1.674.10892.1.1400.60.1.5,MIB-Dell-10892::ideControlStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0060.0001.0005 This attribute defines the state of the IDE control.
.1.3.6.1.4.1.674.10892.1.1400.60.1.6,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0060.0001.0006 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.70,MIB-Dell-10892::disketteControlTable,,not-accessible,,mandatory,,1400.0070 This object defines the Diskette Control Table.
.1.3.6.1.4.1.674.10892.1.1400.70.1,MIB-Dell-10892::disketteControlTableEntry,,not-accessible,disketteControlchassisIndex:disketteControlIndex,mandatory,,1400.0070.0001 This object defines the Diskette Control Table Entry.
.1.3.6.1.4.1.674.10892.1.1400.70.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0070.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.70.1.2,MIB-Dell-10892::diskette,INTEGER,read-only,,mandatory,,1400.0070.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.70.1.3,MIB-Dell-10892::diskette,INTEGER,read-only,,mandatory,unknown(1):disketteAutoConfigOrEnableCapable(2):disketteReadOnlyCapable(4):disketteAutoConfigOrEnableCapableandReadOnlyCapable(6),1400.0070.0001.0003 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.70.1.4,MIB-Dell-10892::diskette,INTEGER,read-only,,mandatory,unknown(1):disketteAutoConfigEnabledOrEnabled(2):disketteisReadOnly(4),1400.0070.0001.0004 This attribute defines the settings of the
.1.3.6.1.4.1.674.10892.1.1400.70.1.5,MIB-Dell-10892::diskette,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0070.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1400.70.1.6,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0070.0001.0006 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.80,MIB-Dell-10892::networkInterfaceControlTable,,not-accessible,,mandatory,,1400.0080 This object defines the Network Interface Control Table.
.1.3.6.1.4.1.674.10892.1.1400.80.1,MIB-Dell-10892::networkInterfaceControlTableEntry,,not-accessible,networkInterfaceControlchassisIndex:networkInterfaceControlIndex,mandatory,,1400.0080.0001 This object defines the Network Interface Control Table Entry.
.1.3.6.1.4.1.674.10892.1.1400.80.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0080.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.80.1.2,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,,1400.0080.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.80.1.3,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,unknown(1):enableCapable(2):enableWithoutPXECapable(4),1400.0080.0001.0003 This attribute defines the capabilities of the
.1.3.6.1.4.1.674.10892.1.1400.80.1.4,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,unknown(1):enabled(2):enabledWithoutPXE(4),1400.0080.0001.0004 This attribute defines the settings of the
.1.3.6.1.4.1.674.10892.1.1400.80.1.5,MIB-Dell-10892::network,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1400.0080.0001.0005 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1400.80.1.6,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1400.0080.0001.0006 This attribute defines the BIOS setup control name
.1.3.6.1.4.1.674.10892.1.1400.90,MIB-Dell-10892::biosSettingTable,,not-accessible,,mandatory,,1400.0090 This object defines the BIOS Setting Table.
.1.3.6.1.4.1.674.10892.1.1400.90.1,MIB-Dell-10892::biosSettingTableEntry,,not-accessible,biosSettingChassisIndex:biosSettingIndex,mandatory,,1400.0090.0001 This object defines the BIOS Setting Table Entry.
.1.3.6.1.4.1.674.10892.1.1400.90.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1400.0090.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.90.1.2,MIB-Dell-10892::BIOS,INTEGER,read-only,,mandatory,,1400.0090.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1400.90.1.3,MIB-Dell-10892::biosSettingName,OCTET,read-only,,mandatory,,1400.0090.0001.0003 This attribute defines the name of the BIOS setting.
.1.3.6.1.4.1.674.10892.1.1400.90.1.4,MIB-Dell-10892::biosSettingDisplayName,OCTET,read-only,,mandatory,,1400.0090.0001.0004 This attribute defines the display name of the BIOS setting.
.1.3.6.1.4.1.674.10892.1.1400.90.1.5,MIB-Dell-10892::biosSettingValueType,INTEGER,read-only,,mandatory,integer(1):string(2):enumeration(3):orderedList(4),1400.0090.0001.0005 This attribute defines the type of the BIOS setting value.
.1.3.6.1.4.1.674.10892.1.1400.90.1.6,MIB-Dell-10892::if,OCTET,read-only,,mandatory,,1400.0090.0001.0006 This attribute defines the current value of the BIOS setting.
.1.3.6.1.4.1.674.10892.1.1400.90.1.7,MIB-Dell-10892::if,OCTET,read-only,,mandatory,,1400.0090.0001.0007 This attribute defines the pending value of the BIOS setting.
.1.3.6.1.4.1.674.10892.1.1400.90.1.8,MIB-Dell-10892::if,OCTET,read-only,,mandatory,,1400.0090.0001.0008 This attribute defines the default value of the BIOS setting.
.1.3.6.1.4.1.674.10892.1.1400.90.1.9,MIB-Dell-10892::if,OCTET,read-only,,mandatory,,1400.0090.0001.0009 This attribute defines the possible values of the BIOS setting.
.1.3.6.1.4.1.674.10892.1.1400.90.1.10,MIB-Dell-10892::BIOS,Gauge32,read-only,,mandatory,,1400.0090.0001.0010 This attribute defines the recommended display order of the
.1.3.6.1.4.1.674.10892.1.1400.90.1.11,MIB-Dell-10892::group,OCTET,read-only,,mandatory,,1400.0090.0001.0011 This attribute defines the display name of the BIOS setting
.1.3.6.1.4.1.674.10892.1.1400.90.1.12,MIB-Dell-10892::(FQDD),OCTET,read-only,,mandatory,,1400.0090.0001.0012 This attribute defines the Fully Qualified Device Descriptor
.1.3.6.1.4.1.674.10892.1.1500,MIB-Dell-10892::lraGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1500.10,MIB-Dell-10892::lRAGlobalSettingsTable,,not-accessible,,mandatory,,1500.0010 This object defines the Local Response Agent (LRA) Global Settings
.1.3.6.1.4.1.674.10892.1.1500.10.1,MIB-Dell-10892::Settings,,not-accessible,lRAGlobalchassisIndex,mandatory,,1500.0010.0001 This object defines the Local Response Agent (LRA) Global
.1.3.6.1.4.1.674.10892.1.1500.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1500.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1500.10.1.2,MIB-Dell-10892::Local,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1500.0010.0001.0002 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1500.10.1.3,MIB-Dell-10892::that,Gauge32,read-only,,mandatory,,1500.0010.0001.0003 This attribute defines the timeout duration in seconds
.1.3.6.1.4.1.674.10892.1.1500.10.1.4,MIB-Dell-10892::that,INTEGER,read-only,,mandatory,speakerControlCapable(1):consoleAlertCapable(2):broadcastMessageCapable(4):osShutDownCapable(8):rebootCapable(16):powerCycleCapable(32):powerOFFCapable(64):executeApplicationCapable(256):lraFullyCapable(383),1500.0010.0001.0004 This attribute defines the global settings capabilities 
.1.3.6.1.4.1.674.10892.1.1500.10.1.5,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):warningCapable(4):enableOnWarningCapable(6):failureCapable(8):enableOnFailureCapable(10):enableOnWarningOrFailureCapable(14),1500.0010.0001.0005 This attribute defines the thermal shutdown capabilities 
.1.3.6.1.4.1.674.10892.1.1500.10.1.6,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,unknown(1):activatedOnWarning(6):activatedOnFailure(10),1500.0010.0001.0006 This attribute defines the thermal shutdown settings 
.1.3.6.1.4.1.674.10892.1.1500.20,MIB-Dell-10892::lRAActionTableTable,,not-accessible,,mandatory,,1500.0020 This object defines the Local Response Agent (LRA) Action Table.
.1.3.6.1.4.1.674.10892.1.1500.20.1,MIB-Dell-10892::Table,,not-accessible,lRAActionTablechassisIndex:lRAActionTableActionNumberIndex,mandatory,,1500.0020.0001 This object defines the Local Response Agent (LRA) Action
.1.3.6.1.4.1.674.10892.1.1500.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1500.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1500.20.1.2,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,,1500.0020.0001.0002 This attribute defines the action number index 160 temperature failure action definition 168 cooling device failure action definition 172 voltage failure action definition 200 temperature warning action definition 202 voltage warning action definition 204 cooling device warning action definition 206 amperage failure action definition 208 amperage warning action definition 210 redundancy unit redundancy lost action definition 212 redundancy unit redundancy degraded action definition 214 power supply failure action definition 220 chassis intrusion action definition 228 memory device noncritical action definition 474 memory device critical action definition 1006 automatic system recovery (ASR) action definition 1353 power supply warning action definition 1553 log near full action definition 1554 log full action definition 1603 processor warning action definition 1604 processor failure action definition 1703 battery warning action definition 1704 battery failure action definition
.1.3.6.1.4.1.674.10892.1.1500.20.1.3,MIB-Dell-10892::value,OCTET,read-only,,mandatory,,1500.0020.0001.0003 This attribute defines the name of the user application
.1.3.6.1.4.1.674.10892.1.1500.20.1.4,MIB-Dell-10892::lRAActionTableSettingsUnique,INTEGER,read-only,,mandatory,speakerControl(1):consoleAlert(2):broadcastMessage(4):osShutDown(8):reboot(16):powerCycle(32):powerOFF(64):executeApplication(256):allLRASettingsUnique(383),1500.0020.0001.0004 This attribute defines the settings for the LRA action.
.1.3.6.1.4.1.674.10892.1.1600,MIB-Dell-10892::cooGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1600.10,MIB-Dell-10892::cooTable,,not-accessible,,mandatory,,1600.0010 This object defines the Cost Of Ownership (COO) Table.
.1.3.6.1.4.1.674.10892.1.1600.10.1,MIB-Dell-10892::cooTableEntry,,not-accessible,coochassisIndex,mandatory,,1600.0010.0001 This object defines the Cost Of Ownership (COO) Table Entry.
.1.3.6.1.4.1.674.10892.1.1600.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.10.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0010.0001.0002 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.10.1.3,MIB-Dell-10892::cooAquisitionPurchaseCost,Gauge32,read-only,,mandatory,,1600.0010.0001.0003 This attribute defines the purchase cost of the system.
.1.3.6.1.4.1.674.10892.1.1600.10.1.4,MIB-Dell-10892::cooAquisitionWayBillNumber,Gauge32,read-only,,mandatory,,1600.0010.0001.0004 This attribute defines the waybill number of the system.
.1.3.6.1.4.1.674.10892.1.1600.10.1.5,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0010.0001.0005 This attribute defines the install date and time of the yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.10.1.6,MIB-Dell-10892::cooAquisitionPurchaseOrder,Gauge32,read-only,,mandatory,,1600.0010.0001.0006 This attribute defines the purchase order number of the
.1.3.6.1.4.1.674.10892.1.1600.10.1.7,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0010.0001.0007 This attribute defines the purchase date and time of the yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.10.1.8,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1600.0010.0001.0008 This attribute defines the name of the signing authority
.1.3.6.1.4.1.674.10892.1.1600.10.1.9,MIB-Dell-10892::was,INTEGER,read-only,,mandatory,,1600.0010.0001.0009 This attribute defines if the purchase of the system
.1.3.6.1.4.1.674.10892.1.1600.10.1.10,MIB-Dell-10892::cooOriginalMachineConfigurationVendorName,OCTET,read-only,,mandatory,,1600.0010.0001.0010 This attribute defines the name of the vendor of the
.1.3.6.1.4.1.674.10892.1.1600.10.1.11,MIB-Dell-10892::cooCostCenterInformationVendorName,OCTET,read-only,,mandatory,,1600.0010.0001.0011 This attribute defines the cost center name of the
.1.3.6.1.4.1.674.10892.1.1600.10.1.12,MIB-Dell-10892::cooUserInformationUserName,OCTET,read-only,,mandatory,,1600.0010.0001.0012 This attribute defines the name of the user of the
.1.3.6.1.4.1.674.10892.1.1600.10.1.13,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0010.0001.0013 This attribute defines the extended warranty start date yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.10.1.14,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0010.0001.0014 This attribute defines the extended warranty end date yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.10.1.15,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,1600.0010.0001.0015 This attribute defines the extended warranty cost
.1.3.6.1.4.1.674.10892.1.1600.10.1.16,MIB-Dell-10892::provider,OCTET,read-only,,mandatory,,1600.0010.0001.0016 This attribute defines the name of the extended warranty
.1.3.6.1.4.1.674.10892.1.1600.10.1.17,MIB-Dell-10892::cooOwnershipCode,INTEGER,read-only,,mandatory,other(1):unknown(2):owned(3):leased(4):rented(5):offOfLease(6):transfer(7),1600.0010.0001.0017 This attribute defines the ownership code for the system.
.1.3.6.1.4.1.674.10892.1.1600.10.1.18,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1600.0010.0001.0018 This attribute defines the name of the corporate owner
.1.3.6.1.4.1.674.10892.1.1600.10.1.19,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1600.0010.0001.0019 This attribute defines the hazardous waste code name
.1.3.6.1.4.1.674.10892.1.1600.10.1.20,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,1600.0010.0001.0020 This attribute defines the deployment time length
.1.3.6.1.4.1.674.10892.1.1600.10.1.21,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,unknown(1):hours(2):days(3),1600.0010.0001.0021 This attribute defines the deployment duration time unit
.1.3.6.1.4.1.674.10892.1.1600.10.1.22,MIB-Dell-10892::cooTrainingName,OCTET,read-only,,mandatory,,1600.0010.0001.0022 This attribute defines the training name for the system.
.1.3.6.1.4.1.674.10892.1.1600.10.1.23,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1600.0010.0001.0023 This attribute defines the outsourcing problem description
.1.3.6.1.4.1.674.10892.1.1600.10.1.24,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1600.0010.0001.0024 This attribute defines the outsourcing service fee
.1.3.6.1.4.1.674.10892.1.1600.10.1.25,MIB-Dell-10892::signing,OCTET,read-only,,mandatory,,1600.0010.0001.0025 This attribute defines the name of the person who has
.1.3.6.1.4.1.674.10892.1.1600.10.1.26,MIB-Dell-10892::charge,OCTET,read-only,,mandatory,,1600.0010.0001.0026 This attribute defines any additional outsourcing
.1.3.6.1.4.1.674.10892.1.1600.10.1.27,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1600.0010.0001.0027 This attribute defines the service level agreement
.1.3.6.1.4.1.674.10892.1.1600.10.1.28,MIB-Dell-10892::insuring,OCTET,read-only,,mandatory,,1600.0010.0001.0028 This attribute defines the name of the company
.1.3.6.1.4.1.674.10892.1.1600.10.1.29,MIB-Dell-10892::cooBoxAssetTagName,OCTET,read-only,,mandatory,,1600.0010.0001.0029 This attribute defines the name the system asset tag.
.1.3.6.1.4.1.674.10892.1.1600.10.1.30,MIB-Dell-10892::cooBoxSystemName,OCTET,read-only,,mandatory,,1600.0010.0001.0030 This attribute defines the name of the system.
.1.3.6.1.4.1.674.10892.1.1600.10.1.31,MIB-Dell-10892::number,OCTET,read-only,,mandatory,,1600.0010.0001.0031 This attribute defines the name of the CPU serial
.1.3.6.1.4.1.674.10892.1.1600.10.1.32,MIB-Dell-10892::on,OCTET,read-only,,mandatory,,1600.0010.0001.0032 This attribute defines the name the operating system
.1.3.6.1.4.1.674.10892.1.1600.10.1.33,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1600.0010.0001.0033 This attribute defines the operating system patch level
.1.3.6.1.4.1.674.10892.1.1600.10.1.34,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1600.0010.0001.0034 This attribute defines the operating system upgrade date
.1.3.6.1.4.1.674.10892.1.1600.10.1.35,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,1600.0010.0001.0035 This attribute defines the depreciation duration time
.1.3.6.1.4.1.674.10892.1.1600.10.1.36,MIB-Dell-10892::unit,INTEGER,read-only,,mandatory,unknown(1):months(4):years(5),1600.0010.0001.0036 This attribute defines the depreciation duration time
.1.3.6.1.4.1.674.10892.1.1600.10.1.37,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,1600.0010.0001.0037 This attribute defines the percentage of depreciation
.1.3.6.1.4.1.674.10892.1.1600.10.1.38,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1600.0010.0001.0038 This attribute defines the method of Depreciation
.1.3.6.1.4.1.674.10892.1.1600.10.1.39,MIB-Dell-10892::or,INTEGER,read-only,,mandatory,,1600.0010.0001.0039 This attribute defines if the system is registered
.1.3.6.1.4.1.674.10892.1.1600.20,MIB-Dell-10892::cooServiceContractTable,,not-accessible,,mandatory,,1600.0020 This object defines the Cost Of Ownership (COO) Service Contract
.1.3.6.1.4.1.674.10892.1.1600.20.1,MIB-Dell-10892::Contract,,not-accessible,cooServiceContractchassisIndex:cooServiceContractIndex,mandatory,,1600.0020.0001 This object defines the Cost Of Ownership (COO) Service
.1.3.6.1.4.1.674.10892.1.1600.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.20.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.20.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0020.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.20.1.4,MIB-Dell-10892::was,INTEGER,read-only,,mandatory,,1600.0020.0001.0004 This attribute defines if the COO service contract
.1.3.6.1.4.1.674.10892.1.1600.20.1.5,MIB-Dell-10892::COO,OCTET,read-only,,mandatory,,1600.0020.0001.0005 This attribute defines the name of the type of
.1.3.6.1.4.1.674.10892.1.1600.20.1.6,MIB-Dell-10892::COO,OCTET,read-only,,mandatory,,1600.0020.0001.0006 This attribute defines the name of the provider of the
.1.3.6.1.4.1.674.10892.1.1600.30,MIB-Dell-10892::cooCostEventLogTable,,not-accessible,,mandatory,,1600.0030 This object defines the Cost Of Ownership (COO) Cost Event Log
.1.3.6.1.4.1.674.10892.1.1600.30.1,MIB-Dell-10892::Log,,not-accessible,cooCostEventLogchassisIndex:cooCostEventLogIndex,mandatory,,1600.0030.0001 This object defines the Cost Of Ownership (COO) Cost Event
.1.3.6.1.4.1.674.10892.1.1600.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.30.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.30.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0030.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.30.1.4,MIB-Dell-10892::COO,Gauge32,read-only,,mandatory,,1600.0030.0001.0004 This attribute defines the duration of the
.1.3.6.1.4.1.674.10892.1.1600.30.1.5,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):hours(2):days(3),1600.0030.0001.0005 This attribute defines the duration type of the
.1.3.6.1.4.1.674.10892.1.1600.30.1.6,MIB-Dell-10892::COO,OCTET,read-only,,mandatory,,1600.0030.0001.0006 This attribute defines the description of the
.1.3.6.1.4.1.674.10892.1.1600.40,MIB-Dell-10892::cooWarrantyTable,,not-accessible,,mandatory,,1600.0040 This object defines the Cost Of Ownership (COO) Warranty Table.
.1.3.6.1.4.1.674.10892.1.1600.40.1,MIB-Dell-10892::Table,,not-accessible,cooWarrantychassisIndex:cooWarrantyIndex,mandatory,,1600.0040.0001 This object defines the Cost Of Ownership (COO) Warranty
.1.3.6.1.4.1.674.10892.1.1600.40.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.40.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.40.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0040.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.40.1.4,MIB-Dell-10892::cooWarrantyDuration,Gauge32,read-only,,mandatory,,1600.0040.0001.0004 This attribute defines the duration of the COO warranty.
.1.3.6.1.4.1.674.10892.1.1600.40.1.5,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):days(3):months(4),1600.0040.0001.0005 This attribute defines the duration type of the
.1.3.6.1.4.1.674.10892.1.1600.40.1.6,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0040.0001.0006 This attribute defines the end date of the COO warranty. yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.40.1.7,MIB-Dell-10892::cooWarrantyCost,Gauge32,read-only,,mandatory,,1600.0040.0001.0007 This attribute defines the cost of the COO warranty.
.1.3.6.1.4.1.674.10892.1.1600.50,MIB-Dell-10892::cooLeaseInformationTable,,not-accessible,,mandatory,,1600.0050 This object defines the Cost Of Ownership (COO) Lease Information
.1.3.6.1.4.1.674.10892.1.1600.50.1,MIB-Dell-10892::Information,,not-accessible,cooLeaseInformationchassisIndex:cooLeaseInformationIndex,mandatory,,1600.0050.0001 This object defines the Cost Of Ownership (COO) Lease
.1.3.6.1.4.1.674.10892.1.1600.50.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.50.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0050.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.50.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0050.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.50.1.4,MIB-Dell-10892::for,INTEGER,read-only,,mandatory,,1600.0050.0001.0004 This attribute defines if there are multiple schedules
.1.3.6.1.4.1.674.10892.1.1600.50.1.5,MIB-Dell-10892::cooLeaseInformationBuyOutAmount,Gauge32,read-only,,mandatory,,1600.0050.0001.0005 This attribute defines buy out amount for this lease.
.1.3.6.1.4.1.674.10892.1.1600.50.1.6,MIB-Dell-10892::cooLeaseInformationLeaseRateFactor,Gauge32,read-only,,mandatory,,1600.0050.0001.0006 This attribute defines the rate factor for this lease.
.1.3.6.1.4.1.674.10892.1.1600.50.1.7,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0050.0001.0007 This attribute defines the end date for this lease. yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.50.1.8,MIB-Dell-10892::for,Gauge32,read-only,,mandatory,,1600.0050.0001.0008 This attribute defines the fair market value
.1.3.6.1.4.1.674.10892.1.1600.50.1.9,MIB-Dell-10892::for,OCTET,read-only,,mandatory,,1600.0050.0001.0009 This attribute defines the name of the lessor
.1.3.6.1.4.1.674.10892.1.1600.60,MIB-Dell-10892::cooScheduleNumberTable,,not-accessible,,mandatory,,1600.0060 This object defines the Cost Of Ownership (COO) Schedule Number
.1.3.6.1.4.1.674.10892.1.1600.60.1,MIB-Dell-10892::Table,,not-accessible,cooScheduleNumberchassisIndex:cooScheduleNumberIndex,mandatory,,1600.0060.0001 This object defines the Cost Of Ownership (COO) Schedule Number
.1.3.6.1.4.1.674.10892.1.1600.60.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.60.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.60.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0060.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.60.1.4,MIB-Dell-10892::COO,Gauge32,read-only,,mandatory,,1600.0060.0001.0004 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.60.1.5,MIB-Dell-10892::COO,OCTET,read-only,,mandatory,,1600.0060.0001.0005 This attribute defines the description of the
.1.3.6.1.4.1.674.10892.1.1600.70,MIB-Dell-10892::cooOptionsTable,,not-accessible,,mandatory,,1600.0070 This object defines the Cost Of Ownership (COO) Options Table.
.1.3.6.1.4.1.674.10892.1.1600.70.1,MIB-Dell-10892::cooOptionsTableEntry,,not-accessible,cooOptionschassisIndex:cooOptionsIndex,mandatory,,1600.0070.0001 This object defines the Cost Of Ownership (COO) Options Table
.1.3.6.1.4.1.674.10892.1.1600.70.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0070.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.70.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0070.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.70.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0070.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.70.1.4,MIB-Dell-10892::COO,Gauge32,read-only,,mandatory,,1600.0070.0001.0004 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.70.1.5,MIB-Dell-10892::COO,OCTET,read-only,,mandatory,,1600.0070.0001.0005 This attribute defines the description of the
.1.3.6.1.4.1.674.10892.1.1600.80,MIB-Dell-10892::cooMaintenanceTable,,not-accessible,,mandatory,,1600.0080 This object defines the Cost Of Ownership (COO) Maintenance Table.
.1.3.6.1.4.1.674.10892.1.1600.80.1,MIB-Dell-10892::Table,,not-accessible,cooMaintenancechassisIndex:cooMaintenanceIndex,mandatory,,1600.0080.0001 This object defines the Cost Of Ownership (COO) Maintenance
.1.3.6.1.4.1.674.10892.1.1600.80.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0080.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.80.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0080.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.80.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0080.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.80.1.4,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0080.0001.0004 This attribute defines the start date of the yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.80.1.5,MIB-Dell-10892::+fff,OCTET,read-only,,mandatory,,1600.0080.0001.0005 This attribute defines the end date of the yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuu-fff
.1.3.6.1.4.1.674.10892.1.1600.80.1.6,MIB-Dell-10892::COO,OCTET,read-only,,mandatory,,1600.0080.0001.0006 This attribute defines the name of the provider of the
.1.3.6.1.4.1.674.10892.1.1600.80.1.7,MIB-Dell-10892::agreement,OCTET,read-only,,mandatory,,1600.0080.0001.0007 This attribute defines the text of the maintenance
.1.3.6.1.4.1.674.10892.1.1600.90,MIB-Dell-10892::cooRepairTable,,not-accessible,,mandatory,,1600.0090 This object defines the Cost Of Ownership (COO) Repair Table.
.1.3.6.1.4.1.674.10892.1.1600.90.1,MIB-Dell-10892::cooRepairTableEntry,,not-accessible,cooRepairchassisIndex:cooRepairIndex,mandatory,,1600.0090.0001 This object defines the Cost Of Ownership (COO) Repair Table
.1.3.6.1.4.1.674.10892.1.1600.90.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0090.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.90.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0090.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.90.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0090.0001.0003 This attribute defines the state setting of the
.1.3.6.1.4.1.674.10892.1.1600.90.1.4,MIB-Dell-10892::system,Gauge32,read-only,,mandatory,,1600.0090.0001.0004 This attribute defines the number of repairs this
.1.3.6.1.4.1.674.10892.1.1600.90.1.5,MIB-Dell-10892::cooRepairVendorName,OCTET,read-only,,mandatory,,1600.0090.0001.0005 This attribute defines the repair vendors's name.
.1.3.6.1.4.1.674.10892.1.1600.100,MIB-Dell-10892::Information,,not-accessible,,mandatory,,1600.0100 This object defines the Cost Of Ownership (COO) Support
.1.3.6.1.4.1.674.10892.1.1600.100.1,MIB-Dell-10892::Information,,not-accessible,cooSupportInformationchassisIndex:cooSupportInformationIndex,mandatory,,1600.0100.0001 This object defines the Cost Of Ownership (COO) Support
.1.3.6.1.4.1.674.10892.1.1600.100.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0100.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.100.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0100.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.100.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0100.0001.0003 This attribute defines the state setting of the
.1.3.6.1.4.1.674.10892.1.1600.100.1.4,MIB-Dell-10892::cooSupportInformationIsOutsourced,INTEGER,read-only,,mandatory,,1600.0100.0001.0004 This attribute defines if support is outsourced or not.
.1.3.6.1.4.1.674.10892.1.1600.100.1.5,MIB-Dell-10892::system,Gauge32,read-only,,mandatory,,1600.0100.0001.0005 This attribute defines the type of the conmponent,
.1.3.6.1.4.1.674.10892.1.1600.100.1.6,MIB-Dell-10892::information,OCTET,read-only,,mandatory,,1600.0100.0001.0006 This attribute defines the help desk support
.1.3.6.1.4.1.674.10892.1.1600.100.1.7,MIB-Dell-10892::the,OCTET,read-only,,mandatory,,1600.0100.0001.0007 This attribute defines the method used to fix
.1.3.6.1.4.1.674.10892.1.1600.110,MIB-Dell-10892::cooTroubleTicketTable,,not-accessible,,mandatory,,1600.0110 This object defines the Cost Of Ownership (COO) Trouble Ticket
.1.3.6.1.4.1.674.10892.1.1600.110.1,MIB-Dell-10892::Table,,not-accessible,cooTroubleTicketchassisIndex:cooTroubleTicketIndex,mandatory,,1600.0110.0001 This object defines the Cost Of Ownership (COO) Trouble Ticket
.1.3.6.1.4.1.674.10892.1.1600.110.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1600.0110.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.110.1.2,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,,1600.0110.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.110.1.3,MIB-Dell-10892::COO,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1600.0110.0001.0003 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1600.110.1.4,MIB-Dell-10892::COO,Gauge32,read-only,,mandatory,,1600.0110.0001.0004 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1600.110.1.5,MIB-Dell-10892::COO,OCTET,read-only,,mandatory,,1600.0110.0001.0005 This attribute defines the name of the
.1.3.6.1.4.1.674.10892.1.1700,DCS3RMT-MIB::remoteAccessGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1700.10,DCS3RMT-MIB::remoteAccessTable,,not-accessible,,mandatory,,1700.0010 This object defines the Remote Access table.
.1.3.6.1.4.1.674.10892.1.1700.10.1,DCS3RMT-MIB::remoteAccessTableEntry,,not-accessible,remoteAccessChassisIndex:remoteAccessAdapterIndex,mandatory,,1700.0010.0001 This object defines the Remote Access table entry.
.1.3.6.1.4.1.674.10892.1.1700.10.1.1,DCS3RMT-MIB::chassis,INTEGER,read-only,,mandatory,,1700.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.2,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.3,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,remoteAccessTypeIsOther(1):remoteAccessTypeIsUnknown(2):remoteAccessTypeIsDRACIII(3):remoteAccessTypeIsERA(4):remoteAccessTypeIsDRAC4(5):remoteAccessTypeIsDRAC5(6),1700.0010.0001.0003 This attribute defines the type of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.4,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1700.0010.0001.0004 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.5,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1700.0010.0001.0005 This attribute defines the state setting of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.6,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1700.0010.0001.0006 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.7,DCS3RMT-MIB::product,OCTET,read-only,,mandatory,,1700.0010.0001.0007 This attribute defines the name of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.8,DCS3RMT-MIB::product,OCTET,read-only,,mandatory,,1700.0010.0001.0008 This attribute defines the description of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.9,DCS3RMT-MIB::product,OCTET,read-only,,mandatory,,1700.0010.0001.0009 This attribute defines the version of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.10,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):logResetCapable(2):hardResetCapable(4):softResetCapable(8):gracefulResetCapable(16):defaultConfigResetCapable(32):allResetCapable(62):shutdownCapable(64):allResetAndShutdownCapable(126),1700.0010.0001.0010 This attribute defines the control capabilities of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.11,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):logReset(2):hardReset(4):softReset(8):gracefulReset(16):defaultConfigReset(32):shutdown(64),1700.0010.0001.0011 This attribute defines the control settings of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.12,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):extPwrSupplyMonitorIfConnectedCapable(2):extPwrSupplyMonitorAlwaysEnabledCapable(4):extPwrSupplyMonitorIfConnectedAndAlwaysEnabledCapable(6),1700.0010.0001.0012 This attribute defines the monitor capabilities of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.13,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):extPwrSupplyMonitorIfConnectedEnabled(2):extPwrSupplyMonitorAlwaysEnabledEnabled(4),1700.0010.0001.0013 This attribute defines the monitor settings of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.14,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):nicCapable(2):nicDHCPCapable(4):nicAndNicDHCPCapable(6),1700.0010.0001.0014 This attribute defines the LAN capabilities of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.15,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):nicEnabled(2):nicDHCPEnabled(4):nicAndNicDHCPEnabled(6),1700.0010.0001.0015 This attribute defines the LAN settings of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.16,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):smtpEmailCapable(2):tftpRemoteFloppyCapable(4):smtpEmailAndTftpRemoteFloppyCapable(6):tftpRemoteFwUpdateCapable(8):smtpEmailAndTftpRemoteFwUpdateCapable(10):tftpRemoteFloppyAndFwUpdateCapable(12):smtpEmailAndTftpRemoteFloppyAndFwUpdateCapable(14),1700.0010.0001.0016 This attribute defines the host capabilities of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.17,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):smtpEmailEnabled(2):tftpRemoteFloppyEnabled(4):smtpEmailAndTftpRemoteFloppyEnabled(6):tftpRemoteFwUpdateEnabled(8):smtpEmailAndTftpRemoteFwUpdateEnabled(10):tftpRemoteFloppyAndFwUpdateEnabled(12):smtpEmailAndTftpRemoteFloppyAndFwUpdateEnabled(14),1700.0010.0001.0017 This attribute defines the host settings of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.18,DCS3RMT-MIB::of,INTEGER,read-only,,mandatory,unknownCapabilities(1):oobSNMPAgentCapable(2):oobSNMPTrapsCapable(4):oobSNMPAgentAndTrapsCapable(6),1700.0010.0001.0018 This attribute defines the out-of-band SNMP capabilities
.1.3.6.1.4.1.674.10892.1.1700.10.1.19,DCS3RMT-MIB::of,INTEGER,read-write,,mandatory,unknown(1):oobSNMPAgentEnabled(2):oobSNMPTrapsEnabled(4):oobSNMPAgentAndTrapsEnabled(6),1700.0010.0001.0019 This attribute defines the out-of-band SNMP settings
.1.3.6.1.4.1.674.10892.1.1700.10.1.20,DCS3RMT-MIB::SMTP,IpAddress,read-write,,mandatory,,1700.0010.0001.0020 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.21,DCS3RMT-MIB::Remote,IpAddress,read-write,,mandatory,,1700.0010.0001.0021 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.22,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0010.0001.0022 This attribute defines the file name of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.23,DCS3RMT-MIB::Remote,IpAddress,read-write,,mandatory,,1700.0010.0001.0023 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.24,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0010.0001.0024 This attribute defines the file name of the
.1.3.6.1.4.1.674.10892.1.1700.10.1.25,DCS3RMT-MIB::by,IpAddress,read-write,,mandatory,,1700.0010.0001.0025 This attribute defines the static IP address to be used
.1.3.6.1.4.1.674.10892.1.1700.10.1.26,DCS3RMT-MIB::IP,IpAddress,read-write,,mandatory,,1700.0010.0001.0026 This attribute defines the netmask for the static
.1.3.6.1.4.1.674.10892.1.1700.10.1.27,DCS3RMT-MIB::by,IpAddress,read-write,,mandatory,,1700.0010.0001.0027 This attribute defines the IP address for the gateway
.1.3.6.1.4.1.674.10892.1.1700.10.1.28,DCS3RMT-MIB::PCMCIA,OCTET,read-only,,mandatory,,1700.0010.0001.0028 This attribute defines the information for the
.1.3.6.1.4.1.674.10892.1.1700.10.1.29,DCS3RMT-MIB::for,OCTET,read-write,,mandatory,,1700.0010.0001.0029 This attribute defines miscellaneous information
.1.3.6.1.4.1.674.10892.1.1700.10.1.30,DCS3RMT-MIB::by,IpAddress,read-only,,mandatory,,1700.0010.0001.0030 This attribute defines the IP address currently being used
.1.3.6.1.4.1.674.10892.1.1700.10.1.31,DCS3RMT-MIB::by,IpAddress,read-only,,mandatory,,1700.0010.0001.0031 This attribute defines the netmask currently being used
.1.3.6.1.4.1.674.10892.1.1700.10.1.32,DCS3RMT-MIB::currently,IpAddress,read-only,,mandatory,,1700.0010.0001.0032 This attribute defines the IP address for the gateway
.1.3.6.1.4.1.674.10892.1.1700.10.1.33,DCS3RMT-MIB::the,INTEGER,read-only,,mandatory,,1700.0010.0001.0033 This attribute defines if DHCP was used to obtain
.1.3.6.1.4.1.674.10892.1.1700.10.1.34,DCS3RMT-MIB::Remote,OCTET,read-only,,mandatory,,1700.0010.0001.0034 This attribute defines the URL for launching the
.1.3.6.1.4.1.674.10892.1.1700.20,DCS3RMT-MIB::remoteUserAdminTable,,not-accessible,,mandatory,,1700.0020 This object defines the Remote Access User Administration table.
.1.3.6.1.4.1.674.10892.1.1700.20.1,DCS3RMT-MIB::table,,not-accessible,remoteUserAdminChassisIndex:remoteUserAdminAdapterIndex:remoteUserAdminUserIndex,mandatory,,1700.0020.0001 This object defines the Remote Access User Administration
.1.3.6.1.4.1.674.10892.1.1700.20.1.1,DCS3RMT-MIB::chassis,INTEGER,read-only,,mandatory,,1700.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.20.1.2,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.20.1.3,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0020.0001.0003 This attribute defines the index (one based) of this
.1.3.6.1.4.1.674.10892.1.1700.20.1.4,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):numericPagerCapable(8):alphaPagerCapable(16):numericPagerAndAlphaPagerCapable(24):emailCapable(32):numericPagerAlphaPagerAndEmailCapable(56):privilegeCapable(64):numericPagerAlphaPagerEmailAndPrivilegeCapable(120),1700.0020.0001.0004 This attribute defines the state capabilities for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.5,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):enabled(2):notReady(4):numericPagerEnabled(8):enabledAndNumericPagerEnabled(10):alphaPagerEnabled(16):enabledAndAlphaPagerEnabled(18):enabledAndNumericPagerAndAlphaPagerEnabled(26):emailEnabled(32):enabledAndEmailEnabled(34):enabledAndNumericPagerAndEmailEnabled(42):enabledAndAlphaPagerAndEmailEnabled(50):enabledAndNumericPagerAlphaPagerAndEmailEnabled(58),1700.0020.0001.0005 This attribute defines the state settings for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.6,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1700.0020.0001.0006 This attribute defines the status for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.7,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0020.0001.0007 This attribute defines the name for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.8,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0020.0001.0008 This attribute defines the password for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.9,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0020.0001.0009 This attribute defines the privileges for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.10,DCS3RMT-MIB::Remote,OCTET,read-only,,mandatory,,1700.0020.0001.0010 This attribute defines the privilege capabilities for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.11,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,,1700.0020.0001.0011 This attribute defines the DRS events filter mask for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.12,DCS3RMT-MIB::for,INTEGER,read-write,,mandatory,,1700.0020.0001.0012 This attribute defines the system events filter mask
.1.3.6.1.4.1.674.10892.1.1700.20.1.13,DCS3RMT-MIB::for,INTEGER,read-only,,mandatory,,1700.0020.0001.0013 This attribute defines the DRS events filter capabilities
.1.3.6.1.4.1.674.10892.1.1700.20.1.14,DCS3RMT-MIB::for,INTEGER,read-only,,mandatory,,1700.0020.0001.0014 This attribute defines the system events filter capabilities
.1.3.6.1.4.1.674.10892.1.1700.20.1.15,DCS3RMT-MIB::for,OCTET,read-write,,mandatory,,1700.0020.0001.0015 This attribute defines the numeric pager number for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.16,DCS3RMT-MIB::pager,OCTET,read-write,,mandatory,,1700.0020.0001.0016 This attribute defines the message to send to the numeric
.1.3.6.1.4.1.674.10892.1.1700.20.1.17,DCS3RMT-MIB::for,INTEGER,read-write,,mandatory,,1700.0020.0001.0017 This attribute defines the numeric pager hangup delay
.1.3.6.1.4.1.674.10892.1.1700.20.1.18,DCS3RMT-MIB::for,OCTET,read-write,,mandatory,,1700.0020.0001.0018 This attribute defines the alphanumeric pager phone number
.1.3.6.1.4.1.674.10892.1.1700.20.1.19,DCS3RMT-MIB::alphanumeric,INTEGER,read-write,,mandatory,other(1):unknown(2):alpha7E0(3):alpha8N1(4),1700.0020.0001.0019 This attribute defines the protocol used by the
.1.3.6.1.4.1.674.10892.1.1700.20.1.20,DCS3RMT-MIB::alphanumeric,INTEGER,read-write,,mandatory,other(1):unknown(2):alphaBaud300(3):alphaBaud1200(4),1700.0020.0001.0020 This attribute defines the baud rate used by the
.1.3.6.1.4.1.674.10892.1.1700.20.1.21,DCS3RMT-MIB::alphanumeric,OCTET,read-write,,mandatory,,1700.0020.0001.0021 This attribute defines the message to be sent to the
.1.3.6.1.4.1.674.10892.1.1700.20.1.22,DCS3RMT-MIB::for,INTEGER,read-write,,mandatory,,1700.0020.0001.0022 This attribute defines the modem connection timeout
.1.3.6.1.4.1.674.10892.1.1700.20.1.23,DCS3RMT-MIB::alphanumeric,OCTET,read-write,,mandatory,,1700.0020.0001.0023 This attribute defines the ID to be sent to the
.1.3.6.1.4.1.674.10892.1.1700.20.1.24,DCS3RMT-MIB::alphanumeric,OCTET,read-write,,mandatory,,1700.0020.0001.0024 This attribute defines the password for the
.1.3.6.1.4.1.674.10892.1.1700.20.1.25,DCS3RMT-MIB::to,OCTET,read-write,,mandatory,,1700.0020.0001.0025 This attribute defines the initialization string
.1.3.6.1.4.1.674.10892.1.1700.20.1.26,DCS3RMT-MIB::for,INTEGER,read-write,,mandatory,,1700.0020.0001.0026 This attribute defines the port for the pager modem
.1.3.6.1.4.1.674.10892.1.1700.20.1.27,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0020.0001.0027 This attribute defines the email address for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.28,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0020.0001.0028 This attribute defines the email message to send to this
.1.3.6.1.4.1.674.10892.1.1700.20.1.29,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):numericPagerTestCapable(2):alphaPagerTestCapable(4):numericPagerTestAndAlphaPagerTestCapable(6):emailTestCapable(8):numericPagerTestAlphaPagerTestAndEmailTestCapable(14),1700.0020.0001.0029 This attribute defines the control capabilities for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.30,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):numericPagerTest(2):alphaPagerTest(4):emailTest(8),1700.0020.0001.0030 This attribute defines the control settings for this
.1.3.6.1.4.1.674.10892.1.1700.20.1.31,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,,1700.0020.0001.0031 This attribute defines the type of this
.1.3.6.1.4.1.674.10892.1.1700.30,DCS3RMT-MIB::remoteSNMPTrapTable,,not-accessible,,mandatory,,1700.0030 This object defines the Remote Access SNMP Trap Destination table.
.1.3.6.1.4.1.674.10892.1.1700.30.1,DCS3RMT-MIB::table,,not-accessible,remoteSNMPTrapChassisIndex:remoteSNMPTrapAdapterIndex:remoteSNMPTrapIndex,mandatory,,1700.0030.0001 This object defines the Remote Access SNMP Trap Destination
.1.3.6.1.4.1.674.10892.1.1700.30.1.1,DCS3RMT-MIB::chassis,INTEGER,read-only,,mandatory,,1700.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.30.1.2,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.30.1.3,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0030.0001.0003 This attribute defines the index (one based) of this
.1.3.6.1.4.1.674.10892.1.1700.30.1.4,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1700.0030.0001.0004 This attribute defines the state capabilities of this
.1.3.6.1.4.1.674.10892.1.1700.30.1.5,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1700.0030.0001.0005 This attribute defines the state settings of this
.1.3.6.1.4.1.674.10892.1.1700.30.1.6,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1700.0030.0001.0006 This attribute defines the status of this
.1.3.6.1.4.1.674.10892.1.1700.30.1.7,DCS3RMT-MIB::Remote,IpAddress,read-write,,mandatory,,1700.0030.0001.0007 This attribute defines the IP address of this
.1.3.6.1.4.1.674.10892.1.1700.30.1.8,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0030.0001.0008 This attribute defines the community for traps sent to this
.1.3.6.1.4.1.674.10892.1.1700.30.1.9,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,,1700.0030.0001.0009 This attribute defines the DRS events filter mask for this
.1.3.6.1.4.1.674.10892.1.1700.30.1.10,DCS3RMT-MIB::this,INTEGER,read-write,,mandatory,,1700.0030.0001.0010 This attribute defines the system events filter mask for
.1.3.6.1.4.1.674.10892.1.1700.30.1.11,DCS3RMT-MIB::for,INTEGER,read-only,,mandatory,,1700.0030.0001.0011 This attribute defines the DRS events filter capabilities
.1.3.6.1.4.1.674.10892.1.1700.30.1.12,DCS3RMT-MIB::capabilities,INTEGER,read-only,,mandatory,,1700.0030.0001.0012 This attribute defines the system events filter
.1.3.6.1.4.1.674.10892.1.1700.30.1.13,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):trapTestCapable(2),1700.0030.0001.0013 This attribute defines the control capabilities of this
.1.3.6.1.4.1.674.10892.1.1700.30.1.14,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):trapTest(2),1700.0030.0001.0014 This attribute defines the control settings of this
.1.3.6.1.4.1.674.10892.1.1700.40,DCS3RMT-MIB::remoteDialUpTable,,not-accessible,,mandatory,,1700.0040 This object defines the Remote Access Dial Up table.
.1.3.6.1.4.1.674.10892.1.1700.40.1,DCS3RMT-MIB::remoteDialUpTableEntry,,not-accessible,remoteDialUpChassisIndex:remoteDialUpAdapterIndex:remoteDialUpIndex,mandatory,,1700.0040.0001 This object defines the Remote Access Dial Up table entry.
.1.3.6.1.4.1.674.10892.1.1700.40.1.1,DCS3RMT-MIB::chassis,INTEGER,read-only,,mandatory,,1700.0040.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.40.1.2,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0040.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.40.1.3,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0040.0001.0003 This attribute defines the index (one based) of this
.1.3.6.1.4.1.674.10892.1.1700.40.1.4,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):dialInCapable(8):dialOutCapable(16):dialInDHCPCapable(32):dialInAuthAnyCapable(64):dialInAndOutAndDialInDHCPAndAuthAnyCapable(120):dialInAuthEncryptedCapable(128):dialInAndOutAndDialInDHCPAndAuthAnyAndEncryptedCapable(248):dialInAuthMschapCapable(256):dialInAndOutAndDialInDHCPAndAllAuthCapable(504),1700.0040.0001.0004 This attribute defines the state capabilities of this
.1.3.6.1.4.1.674.10892.1.1700.40.1.5,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):enabled(2):notReady(4):dialInEnabled(8):dialOutEnabled(16):dialInDHCPEnabled(32):dialInAuthAnyEnabled(64):enabledDialInAndOutAndDialInAuthAnyEnabled(90):enabledDialInAndOutAndDialInDHCPAndAuthAnyEnabled(122):dialInAuthEncryptedEnabled(128):enabledDialInAndOutAndDialInAuthEncryptedEnabled(154):enabledDialInAndOutAndDialInDHCPAndAuthEncryptedEnabled(186):dialInAuthMschapEnabled(256):enabledDialInAndOutAndDialInAuthMschapEnabled(282):enabledDialInAndOutAndDialInDHCPAndAuthMschapEnabled(314),1700.0040.0001.0005 This attribute defines the state settings of this
.1.3.6.1.4.1.674.10892.1.1700.40.1.6,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1700.0040.0001.0006 This attribute defines the status of this
.1.3.6.1.4.1.674.10892.1.1700.40.1.7,DCS3RMT-MIB::PPP,IpAddress,read-write,,mandatory,,1700.0040.0001.0007 This attribute defines the base IP address of the
.1.3.6.1.4.1.674.10892.1.1700.40.1.8,DCS3RMT-MIB::in,INTEGER,read-write,,mandatory,,1700.0040.0001.0008 This attribute defines the PPP idle timeout value
.1.3.6.1.4.1.674.10892.1.1700.40.1.9,DCS3RMT-MIB::in,INTEGER,read-write,,mandatory,,1700.0040.0001.0009 This attribute defines the PPP connect timeout value
.1.3.6.1.4.1.674.10892.1.1700.40.1.10,DCS3RMT-MIB::value,INTEGER,read-write,,mandatory,,1700.0040.0001.0010 This attribute defines the modem dial out connect timeout
.1.3.6.1.4.1.674.10892.1.1700.40.1.11,DCS3RMT-MIB::used,INTEGER,read-write,,mandatory,remoteDialUpIsOther(1):remoteDialUpIsUnknown(2):remoteDialUpIsTone(3):remoteDialUpIsPulse(4),1700.0040.0001.0011 This attribute defines the dial type for the modem
.1.3.6.1.4.1.674.10892.1.1700.40.1.12,DCS3RMT-MIB::to,OCTET,read-write,,mandatory,,1700.0040.0001.0012 This attribute defines the initialization string to be sent
.1.3.6.1.4.1.674.10892.1.1700.40.1.13,DCS3RMT-MIB::used,INTEGER,read-write,,mandatory,,1700.0040.0001.0013 This attribute defines the baud rate for the modem
.1.3.6.1.4.1.674.10892.1.1700.40.1.14,DCS3RMT-MIB::used,INTEGER,read-write,,mandatory,,1700.0040.0001.0014 This attribute defines the port for the modem
.1.3.6.1.4.1.674.10892.1.1700.50,DCS3RMT-MIB::remoteUserDialInCfgTable,,not-accessible,,mandatory,,1700.0050 This object defines the Remote Access User Dial In Configuration
.1.3.6.1.4.1.674.10892.1.1700.50.1,DCS3RMT-MIB::table,,not-accessible,remoteUserDialInCfgChassisIndex:remoteUserDialInCfgAdapterIndex:remoteUserDialInCfgUserIndex,mandatory,,1700.0050.0001 This object defines the Remote Access User Dial In Configuration
.1.3.6.1.4.1.674.10892.1.1700.50.1.1,DCS3RMT-MIB::chassis,INTEGER,read-only,,mandatory,,1700.0050.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.50.1.2,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0050.0001.0002 This attribute defines the index (one based) of
.1.3.6.1.4.1.674.10892.1.1700.50.1.3,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0050.0001.0003 This attribute defines the index (one based) of this
.1.3.6.1.4.1.674.10892.1.1700.50.1.4,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):dialInCallbackPresetNumberCapable(8):enableAndDialInCallbackPresetNumberCapable(10):dialInCallbackUserSpecifiedCapable(16):enableAndDialInCallbackUserSpecifiedCapable(18):dialInCallbackPresetNumberAndUserSpecifiedCapable(24):enableAndDialInCallbackPresetNumberAndUserSpecifiedCapable(26),1700.0050.0001.0004 This attribute defines the state capabilities of this
.1.3.6.1.4.1.674.10892.1.1700.50.1.5,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):enabled(2):notReady(4):dialInCallbackPresetNumberEnabled(8):enabledAndDialInCallbackPresetNumberEnabled(10):dialInCallbackUserSpecifiedEnabled(16):enabledAndDialInCallbackUserSpecifiedEnabled(18),1700.0050.0001.0005 This attribute defines the state settings of this
.1.3.6.1.4.1.674.10892.1.1700.50.1.6,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1700.0050.0001.0006 This attribute defines the status of this
.1.3.6.1.4.1.674.10892.1.1700.50.1.7,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0050.0001.0007 This attribute defines the PPP user name of this
.1.3.6.1.4.1.674.10892.1.1700.50.1.8,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0050.0001.0008 This attribute defines the PPP password for this
.1.3.6.1.4.1.674.10892.1.1700.50.1.9,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0050.0001.0009 This attribute defines the callback phone number for this
.1.3.6.1.4.1.674.10892.1.1700.60,DCS3RMT-MIB::remoteDialOutTable,,not-accessible,,mandatory,,1700.0060 This object defines the Remote Access Dial Out table.
.1.3.6.1.4.1.674.10892.1.1700.60.1,DCS3RMT-MIB::remoteDialOutTableEntry,,not-accessible,remoteDialOutChassisIndex:remoteDialOutAdapterIndex:remoteDialOutDialOutIndex,mandatory,,1700.0060.0001 This object defines the Remote Access Dial Out table entry.
.1.3.6.1.4.1.674.10892.1.1700.60.1.1,DCS3RMT-MIB::chassis,INTEGER,read-only,,mandatory,,1700.0060.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.60.1.2,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0060.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1700.60.1.3,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,,1700.0060.0001.0003 This attribute defines the index (one based) of this
.1.3.6.1.4.1.674.10892.1.1700.60.1.4,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):dialOutPPPAuthAnyCapable(8):dialOutPPPAuthEncryptedCapable(16):dialOutPPPAuthAnyAndEncryptedCapable(24):dialOutPPPAuthMschapCapable(32):dialOutPPPAuthAnyAndMschapCapable(40):dialOutPPPAuthEncryptedAndMschapCapable(48):dialOutPPPAuthAnyEncryptedAndMschapCapable(56),1700.0060.0001.0004 This attribute defines the state capabilities of this
.1.3.6.1.4.1.674.10892.1.1700.60.1.5,DCS3RMT-MIB::Remote,INTEGER,read-write,,mandatory,unknown(1):enabled(2):notReady(4):dialOutPPPAuthAnyEnabled(8):enabledAnddialOutPPPAuthAnyEnabled(10):dialOutPPPAuthEncryptedEnabled(16):enabledAnddialOutPPPAuthEncryptedEnabled(18):dialOutPPPAuthMschapEnabled(32):enabledAnddialOutPPPAuthMschapEnabled(34),1700.0060.0001.0005 This attribute defines the state settings of this
.1.3.6.1.4.1.674.10892.1.1700.60.1.6,DCS3RMT-MIB::Remote,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1700.0060.0001.0006 This attribute defines the status of this
.1.3.6.1.4.1.674.10892.1.1700.60.1.7,DCS3RMT-MIB::Remote,IpAddress,read-write,,mandatory,,1700.0060.0001.0007 This attribute defines the IP address for this
.1.3.6.1.4.1.674.10892.1.1700.60.1.8,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0060.0001.0008 This attribute defines the phone number for this
.1.3.6.1.4.1.674.10892.1.1700.60.1.9,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0060.0001.0009 This attribute defines the PPP user name for this
.1.3.6.1.4.1.674.10892.1.1700.60.1.10,DCS3RMT-MIB::Remote,OCTET,read-write,,mandatory,,1700.0060.0001.0010 This attribute defines the PPP password for this
.1.3.6.1.4.1.674.10892.1.1800,MIB-Dell-10892::clusterGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1800.10,MIB-Dell-10892::clusterTable,,not-accessible,,mandatory,,1800.0010 This object defines the Cluster Table.
.1.3.6.1.4.1.674.10892.1.1800.10.1,MIB-Dell-10892::clusterTableEntry,,not-accessible,clusterChassisIndex:clusterIndex,mandatory,,1800.0010.0001 This object defines the Cluster Table Entry.
.1.3.6.1.4.1.674.10892.1.1800.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1800.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1800.10.1.2,MIB-Dell-10892::clusterIndex,INTEGER,read-only,,mandatory,,1800.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1800.10.1.3,MIB-Dell-10892::clusterStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1800.0010.0001.0003 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1800.10.1.4,MIB-Dell-10892::clusterStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1800.0010.0001.0004 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1800.10.1.5,MIB-Dell-10892::clusterStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1800.0010.0001.0005 This attribute defines the status of the cluster.
.1.3.6.1.4.1.674.10892.1.1800.10.1.6,MIB-Dell-10892::clusterType,INTEGER,read-only,,mandatory,unknown(1):highAvailabilityCluster(2),1800.0010.0001.0006 This attribute defines the type of the cluster.
.1.3.6.1.4.1.674.10892.1.1800.10.1.7,MIB-Dell-10892::type,OCTET,read-only,,mandatory,,1800.0010.0001.0007 This attribute defines the description name for the
.1.3.6.1.4.1.674.10892.1.1800.10.1.8,MIB-Dell-10892::clusterName,OCTET,read-only,,mandatory,,1800.0010.0001.0008 This attribute defines the name of the cluster.
.1.3.6.1.4.1.674.10892.1.1900,MIB-Dell-10892::bmcGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.1900.10,MIB-Dell-10892::bmcTable,,not-accessible,,mandatory,,1900.0010 This object defines the Baseboard Management Controller (BMC)
.1.3.6.1.4.1.674.10892.1.1900.10.1,MIB-Dell-10892::Table,,not-accessible,bmcChassisIndex:bmcIndex,mandatory,,1900.0010.0001 This object defines the Baseboard Management Controller (BMC)
.1.3.6.1.4.1.674.10892.1.1900.10.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1900.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1900.10.1.2,MIB-Dell-10892::bmcIndex,INTEGER,read-only,,mandatory,,1900.0010.0001.0002 This attribute defines the index (one based) of the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.3,MIB-Dell-10892::bmcStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1900.0010.0001.0003 This attribute defines the state capabilities of the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.4,MIB-Dell-10892::bmcStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1900.0010.0001.0004 This attribute defines the state settings of the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.5,MIB-Dell-10892::bmcStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1900.0010.0001.0005 This attribute defines the status of the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.6,MIB-Dell-10892::bmcDisplayName,OCTET,read-only,,mandatory,,1900.0010.0001.0006 This attribute defines the display name of the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.7,MIB-Dell-10892::bmcDescriptionName,OCTET,read-only,,mandatory,,1900.0010.0001.0007 This attribute defines the description of the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.8,MIB-Dell-10892::that,OCTET,read-only,,mandatory,,1900.0010.0001.0008 This attribute defines the version of the
.1.3.6.1.4.1.674.10892.1.1900.10.1.9,MIB-Dell-10892::of,OCTET,read-only,,mandatory,,1900.0010.0001.0009 This attribute defines the Globally Unique ID (GUID)
.1.3.6.1.4.1.674.10892.1.1900.10.1.10,MIB-Dell-10892::bmcType,INTEGER,read-only,,mandatory,iDRAC(8):iDRAC6(10):iDRAC6Modular(11):iDRAC6BMC(13):iDRAC7(16):iDRAC7Modular(17):vrtxCMC(18):fx2CMC(19):iDRAC8(32):iDRAC8Modular(33):iDRAC8DCS(34):iDRAC9(48):iDRAC9Modular(49):iDRAC9DCS(50),1900.0010.0001.00010 This attribute defines the type of the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.11,MIB-Dell-10892::The,OCTET,read-only,,mandatory,,1900.0010.0001.0011 This attribute defines the module name for the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.12,MIB-Dell-10892::The,OCTET,read-only,,mandatory,,1900.0010.0001.0012 This attribute defines the IPv4 URL for the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.13,MIB-Dell-10892::The,OCTET,read-only,,mandatory,,1900.0010.0001.0013 This attribute defines the IPv6 URL for the BMC.
.1.3.6.1.4.1.674.10892.1.1900.10.1.14,MIB-Dell-10892::bmcBladeFormFactorName,INTEGER,read-only,,mandatory,formFactorTypeIsSingleWidthHalfHeight(1):formFactorTypeIsDualWidthHalfHeight(2):formFactorTypeIsSingleWidthFullHeight(3):formFactorTypeIsDualWidthFullHeight(4):formFactorTypeIsSingleWidthQuarterHeight(5):formFactorTypeIs1UHalfWidth(6):formFactorTypeIs1UQuarterWidth(7):formFactorTypeIs1UFullWidth(8):notApplicable(256),1900.0010.0001.0014 This attribute defines Blade FormFactor.
.1.3.6.1.4.1.674.10892.1.1900.20,MIB-Dell-10892::Serial,,not-accessible,,mandatory,,1900.0020 This object defines the Baseboard Management Controller (BMC)
.1.3.6.1.4.1.674.10892.1.1900.20.1,MIB-Dell-10892::Serial,,not-accessible,bmcSerialInterfaceChassisIndex:bmcSerialInterfaceBMCIndex:bmcSerialInterfaceIndex,mandatory,,1900.0020.0001 This object defines the Baseboard Management Controller (BMC)
.1.3.6.1.4.1.674.10892.1.1900.20.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1900.0020.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.2,MIB-Dell-10892::assoiciated,INTEGER,read-only,,mandatory,,1900.0020.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.3,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,,1900.0020.0001.0003 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.4,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1900.0020.0001.0004 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.5,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1900.0020.0001.0005 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.6,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1900.0020.0001.0006 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.7,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,,1900.0020.0001.0007 This attribute defines the BMC channel number of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.8,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,modemBasic(1):modemPPP(2):modemTerminal(4):directBasic(8):directPPP(16):directTerminal(32),1900.0020.0001.0008 This attribute defines the connection mode capabilities
.1.3.6.1.4.1.674.10892.1.1900.20.1.9,MIB-Dell-10892::of,INTEGER,read-only,,mandatory,modemBasic(1):modemPPP(2):modemTerminal(4):directBasic(8):directPPP(16):directTerminal(32),1900.0020.0001.0009 This attribute defines the connection mode settings
.1.3.6.1.4.1.674.10892.1.1900.20.1.10,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,rtsCts(1):xonXoff(2),1900.0020.0001.0010 This attribute defines the flow control type of the
.1.3.6.1.4.1.674.10892.1.1900.20.1.11,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,bps9600(6):bps19200(7):bps38400(8):bps57600(9):bps115200(10),1900.0020.0001.0011 This attribute defines the bit rate of the
.1.3.6.1.4.1.674.10892.1.1900.30,MIB-Dell-10892::LAN,,not-accessible,,mandatory,,1900.0030 This object defines the Baseboard Management Controller (BMC)
.1.3.6.1.4.1.674.10892.1.1900.30.1,MIB-Dell-10892::LAN,,not-accessible,bmcLANInterfaceChassisIndex:bmcLANInterfaceBMCIndex:bmcLANInterfaceIndex,mandatory,,1900.0030.0001 This object defines the Baseboard Management Controller (BMC)
.1.3.6.1.4.1.674.10892.1.1900.30.1.1,MIB-Dell-10892::associated,INTEGER,read-only,,mandatory,,1900.0030.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.2,MIB-Dell-10892::assoiciated,INTEGER,read-only,,mandatory,,1900.0030.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.3,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,,1900.0030.0001.0003 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.4,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1900.0030.0001.0004 This attribute defines the state capabilities of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.5,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1900.0030.0001.0005 This attribute defines the state settings of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.6,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),1900.0030.0001.0006 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.7,MIB-Dell-10892::BMC,INTEGER,read-only,,mandatory,,1900.0030.0001.0007 This attribute defines the BMC channel number of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.8,MIB-Dell-10892::IP,INTEGER,read-only,,mandatory,static(1):dhcp(2):biosOrSystemSoftware(3):other(4),1900.0030.0001.0008 This attribute defines the source type of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.9,MIB-Dell-10892::BMC,IpAddress,read-only,,mandatory,,1900.0030.0001.0009 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.10,MIB-Dell-10892::BMC,IpAddress,read-only,,mandatory,,1900.0030.0001.0010 This attribute defines the subnet mask of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.11,MIB-Dell-10892::default,IpAddress,read-only,,mandatory,,1900.0030.0001.0011 This attribute defines the IP address of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.12,MIB-Dell-10892::BMC,OCTET,read-only,,mandatory,,1900.0030.0001.0012 This attribute defines the MAC address of the
.1.3.6.1.4.1.674.10892.1.1900.30.1.13,MIB-Dell-10892::BMC,OCTET,read-only,,mandatory,,1900.0030.0001.0013 This attribute defines the SNMP community used for
.1.3.6.1.4.1.674.10892.1.2000,DCS3FRU-MIB::fruGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.2000.10,DCS3FRU-MIB::fruTable,,not-accessible,,mandatory,,2000.0010 This object defines the Field Replaceable Unit table.
.1.3.6.1.4.1.674.10892.1.2000.10.1,DCS3FRU-MIB::fruTableEntry,,not-accessible,fruChassisIndex:fruIndex,mandatory,,2000.0010.0001 This object defines the Field Replaceable Unit table entry.
.1.3.6.1.4.1.674.10892.1.2000.10.1.1,DCS3FRU-MIB::chassis,INTEGER,read-only,,mandatory,,2000.0010.0001.0001 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.2,DCS3FRU-MIB::field,INTEGER,read-only,,mandatory,,2000.0010.0001.0002 This attribute defines the index (one based) of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.3,DCS3FRU-MIB::field,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),2000.0010.0001.0003 This attribute defines the status of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.4,DCS3FRU-MIB::other,INTEGER,read-only,,mandatory,ok(1):notSupported(2):notAvailable(3):checksumInvalid(4):corrupted(5),2000.0010.0001.0004 This attribute defines the state of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.5,DCS3FRU-MIB::field,OCTET,read-only,,mandatory,,2000.0010.0001.0005 This attribute defines the device name of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.6,DCS3FRU-MIB::field,OCTET,read-only,,mandatory,,2000.0010.0001.0006 This attribute defines the manufacturer of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.7,DCS3FRU-MIB::field,OCTET,read-only,,mandatory,,2000.0010.0001.0007 This attribute defines the serial number of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.8,DCS3FRU-MIB::field,OCTET,read-only,,mandatory,,2000.0010.0001.0008 This attribute defines the part number of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.9,DCS3FRU-MIB::field,OCTET,read-only,,mandatory,,2000.0010.0001.0009 This attribute defines the revision of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.10,DCS3FRU-MIB::of,OCTET,read-only,,mandatory,,2000.0010.0001.0010 This attribute defines the manufacturing date of the
.1.3.6.1.4.1.674.10892.1.2000.10.1.11,DCS3FRU-MIB::field,OCTET,read-only,,mandatory,,2000.0010.0001.0011 This attribute defines the asset tag of the
.1.3.6.1.4.1.674.10892.1.5000,MIB-Dell-10892::alertGroup,,,,,,
.1.3.6.1.4.1.674.10892.1.5000.10,MIB-Dell-10892::alertVariables,,,,,,
.1.3.6.1.4.1.674.10892.1.5000.10.1,MIB-Dell-10892::alertSystem,OCTET,read-only,,mandatory,,5000.0010.0001 Name of the system generating the alert.
.1.3.6.1.4.1.674.10892.1.5000.10.2,MIB-Dell-10892::If,OBJECT,read-only,,mandatory,,5000.0010.0002 OID for the index attribute in the table that contains the object
.1.3.6.1.4.1.674.10892.1.5000.10.3,MIB-Dell-10892::alertMessage,OCTET,read-only,,mandatory,,5000.0010.0003 Message describing the alert.
.1.3.6.1.4.1.674.10892.1.5000.10.4,MIB-Dell-10892::alertCurrentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),5000.0010.0004 Current status of object causing the alert.
.1.3.6.1.4.1.674.10892.1.5000.10.5,MIB-Dell-10892::alertPreviousStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6):absent(7),5000.0010.0005 Previous status of object causing the alert.
.1.3.6.1.4.1.674.10892.1.5000.10.6,MIB-Dell-10892::alertData,OCTET,read-only,,mandatory,,5000.0010.0006 Alert data.
.1.3.6.1.4.1.674.10892.1.5000.10.7,MIB-Dell-10892::alertMsgID,OCTET,read-only,,mandatory,,5000.0010.0007 Alert message ID.
.1.3.6.1.4.1.674.10892.1.5000.10.8,MIB-Dell-10892::alertSystemFQDN,OCTET,read-only,,mandatory,,5000.0010.0008 Fully qualified domain name of the system generating the alert.
.1.3.6.1.4.1.674.10892.1.5000.10.9,MIB-Dell-10892::alertServiceTag,OCTET,read-only,,mandatory,,5000.0010.0009 Service tag of the system generating the alert.
.1.3.6.1.4.1.674.10892.1.5000.10.10,MIB-Dell-10892::alertChassisServiceTag,OCTET,read-only,,mandatory,,5000.0010.0010 Chassis service tag of the system generating the alert.
.1.3.6.1.4.1.674.10892.2,DCS3RMT-MIB::drsOutOfBandGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.0,DELL-RAC-MIB::drsOutofBandGroup#,,,,,,
.1.3.6.1.4.1.674.10892.2.0.1001,DELL-RAC-MIB::alertDrscTestTrapEvent,,,,,,The RAC generated a test trap event in response to a user request.
.1.3.6.1.4.1.674.10892.2.0.1002,DELL-RAC-MIB::alertDrscAuthError,,,,,,The RAC Authentication Failures during a time period have Exceeded a Threshold.
.1.3.6.1.4.1.674.10892.2.0.1003,DELL-RAC-MIB::alertDrscLostESM,,,,,,The RAC cannot communicate with the baseboard management controller (ESM).
.1.3.6.1.4.1.674.10892.2.0.1004,DELL-RAC-MIB::alertDrscFoundESM,,,,,,The RAC is communicating normally with the baseboard management controller (ESM).
.1.3.6.1.4.1.674.10892.2.0.1005,DELL-RAC-MIB::alertDrscPowerOff,,,,,,The RAC has detected a System power state change to powered-off.
.1.3.6.1.4.1.674.10892.2.0.1006,DELL-RAC-MIB::alertDrscPowerOn,,,,,,The RAC has detected a system power state change to powered-on.
.1.3.6.1.4.1.674.10892.2.0.1007,DELL-RAC-MIB::alertDrscWatchdogExpired,,,,,,The RAC has detected that the system watchdog has expired indicating a system hang.
.1.3.6.1.4.1.674.10892.2.0.1008,DELL-RAC-MIB::alertDrscBattLow,,,,,,The RAC Battery charge is below 25% indicating that the battery may only be able to power the DRSC for 8-10 minutes.
.1.3.6.1.4.1.674.10892.2.0.1009,DELL-RAC-MIB::alertDrscTempNormal,,,,,,The RAC Temperature probe has retured to a normal value.
.1.3.6.1.4.1.674.10892.2.0.1010,DELL-RAC-MIB::alertDrscTempWarning,,,,,,The RAC Temperature probe has detected a Warning value.
.1.3.6.1.4.1.674.10892.2.0.1011,DELL-RAC-MIB::alertDrscTempCritical,,,,,,The RAC Temperature probe has detected a failure (or critical) value.
.1.3.6.1.4.1.674.10892.2.0.1012,DELL-RAC-MIB::alertDrscVoltNormal,,,,,,The RAC voltage has returned to a normal value.
.1.3.6.1.4.1.674.10892.2.0.1013,DELL-RAC-MIB::alertDrscVoltWarning,,,,,,The RAC voltage probe has detected a warning value.
.1.3.6.1.4.1.674.10892.2.0.1014,DELL-RAC-MIB::alertDrscVoltCritical,,,,,,The RAC voltage probe has detected a failure (or critical) value.
.1.3.6.1.4.1.674.10892.2.0.1015,DELL-RAC-MIB::alertDrscSELWarning,,,,,,The RAC has detected a new event in the System Event Log with Severity: Warning.
.1.3.6.1.4.1.674.10892.2.0.1016,DELL-RAC-MIB::alertDrscSELCritical,,,,,,The RAC has detected a new event in the System Event Log with Severity: Critical.
.1.3.6.1.4.1.674.10892.2.0.1017,DELL-RAC-MIB::alertDrscSEL80percentFull,,,,,,The RAC has detected that the System Event Log is 80% full.
.1.3.6.1.4.1.674.10892.2.0.1018,DELL-RAC-MIB::alertDrscSEL90percentFull,,,,,,The RAC has detected that the System Event Log is 90% full.
.1.3.6.1.4.1.674.10892.2.0.1019,DELL-RAC-MIB::alertDrscSEL100percentFull,,,,,,The RAC has detected that the System Event Log is 100% full.
.1.3.6.1.4.1.674.10892.2.0.1020,DELL-RAC-MIB::alertDrscSELNormal,,,,,,The RAC has detected a new event in the System Event Log with Severity: Normal.
.1.3.6.1.4.1.674.10892.2.0.2000,DELL-RAC-MIB::alertCMCTestTrap,,,,,,The CMC has generated a test trap
.1.3.6.1.4.1.674.10892.2.0.2002,DELL-RAC-MIB::alertCMCNormalTrap,,,,,,The CMC reported a return-to-normal or informational event.
.1.3.6.1.4.1.674.10892.2.0.2003,DELL-RAC-MIB::alertCMCWarningTrap,,,,,,The CMC reported a warning event.
.1.3.6.1.4.1.674.10892.2.0.2004,DELL-RAC-MIB::alertCMCCriticalTrap,,,,,,The CMC reported a critical event.
.1.3.6.1.4.1.674.10892.2.0.2005,DELL-RAC-MIB::alertCMCNonRecoverableTrap,,,,,,The CMC reported a catastrophic event.
.1.3.6.1.4.1.674.10892.2.1,DELL-RAC-MIB::drsInformationGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.1.1,DELL-RAC-MIB::drsProductInfoGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.1.1.1,DELL-RAC-MIB::drsProductName,OCTET,read-only,,mandatory,,0001.0001.0001 This attribute defines the product name of a chassis management controller.
.1.3.6.1.4.1.674.10892.2.1.1.2,DELL-RAC-MIB::drsProductShortName,OCTET,read-only,,mandatory,,0001.0001.0002 This attribute defines the short product name of a chassis management controller. 
.1.3.6.1.4.1.674.10892.2.1.1.3,DELL-RAC-MIB::drsProductDescription,OCTET,read-only,,mandatory,,0001.0001.0003 This attribute defines the product description of a chassis management controller. 
.1.3.6.1.4.1.674.10892.2.1.1.4,DELL-RAC-MIB::drsProductManufacturer,OCTET,read-only,,mandatory,,0001.0001.0004 This attribute defines the product manufacturer of a chassis management controller. 
.1.3.6.1.4.1.674.10892.2.1.1.5,DELL-RAC-MIB::drsProductVersion,OCTET,read-only,,mandatory,,0001.0001.0005 This attribute defines the product version of a chassis management controller. 
.1.3.6.1.4.1.674.10892.2.1.1.6,DELL-RAC-MIB::drsChassisServiceTag,OCTET,read-only,,mandatory,,0001.0001.0007 This attribute defines the Service Tag of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.7,DELL-RAC-MIB::drsProductURL,OCTET,read-only,,mandatory,,0001.0001.0006 This attribute defines the out-of-band UI URL of a chassis management controller. 
.1.3.6.1.4.1.674.10892.2.1.1.8,DELL-RAC-MIB::drsProductChassisAssetTag,OCTET,read-only,,mandatory,,0001.0001.0008 This attribute defines the Asset Tag of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.9,DELL-RAC-MIB::drsProductChassisLocation,OCTET,read-only,,mandatory,,0001.0001.0009 This attribute defines the location of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.10,DELL-RAC-MIB::drsProductChassisName,OCTET,read-only,,mandatory,,0001.0001.0010 This attribute defines the name of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.11,DELL-RAC-MIB::drsSystemServiceTag,OCTET,read-only,,mandatory,,0001.0001.0011 This attribute defines the service tag of a system. 
.1.3.6.1.4.1.674.10892.2.1.1.12,DELL-RAC-MIB::drsProductSystemAssetTag,OCTET,read-only,,mandatory,,0001.0001.0012 This attribute defines the asset tag of a system. 
.1.3.6.1.4.1.674.10892.2.1.1.13,DELL-RAC-MIB::drsProductSystemSlot,OCTET,read-only,,mandatory,,0001.0001.0013 This attribute defines the slot number of a CMC. 
.1.3.6.1.4.1.674.10892.2.1.1.14,DELL-RAC-MIB::drsProductType,INTEGER,read-only,,mandatory,other(1):unknown(2):dracIII(3):era(4):drac4(5):drac5(6):drac5MC(7):cmc(8):idrac(9):idrac7monolithic(16):idrac7modular(17):vrtxCMC(18):fx2CMC(19):idrac8monolithic(32):idrac8modular(33),0001.0001.0014 This attribute defines type of a remote access card 
.1.3.6.1.4.1.674.10892.2.1.1.15,DELL-RAC-MIB::drsProductChassisDataCenter,OCTET,read-only,,mandatory,,0001.0001.0015 This attribute defines the Data Center locator of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.16,DELL-RAC-MIB::drsProductChassisAisle,OCTET,read-only,,mandatory,,0001.0001.0016 This attribute defines the Aisle locator of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.17,DELL-RAC-MIB::drsProductChassisRack,OCTET,read-only,,mandatory,,0001.0001.0017 This attribute defines the Rack locator of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.18,DELL-RAC-MIB::drsProductChassisRackSlot,OCTET,read-only,,mandatory,,0001.0001.0018 This attribute defines the Rack Slot locator of the chassis. 
.1.3.6.1.4.1.674.10892.2.1.1.19,DELL-RAC-MIB::drsProductChassisModel,OCTET,read-only,,mandatory,,0001.0001.0019 This attribute defines the Model of the chassis.
.1.3.6.1.4.1.674.10892.2.1.1.20,DELL-RAC-MIB::drsProductChassisExpressServiceCode,OCTET,read-only,,mandatory,,0001.0001.0020 This attribute defines the Express Service Code of the chassis.
.1.3.6.1.4.1.674.10892.2.1.1.21,DELL-RAC-MIB::drsProductChassisSystemID,INTEGER,read-only,,mandatory,,0001.0001.0021 This attribute defines the System ID of the chassis.
.1.3.6.1.4.1.674.10892.2.1.1.22,DELL-RAC-MIB::drsProductChassisSize,INTEGER,read-only,,mandatory,,0001.0001.0022 This attribute defines the size of the
.1.3.6.1.4.1.674.10892.2.1.2,DELL-RAC-MIB::drsFirmwareGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.1.2.1,DELL-RAC-MIB::drsFirmwareVersion,OCTET,read-only,,mandatory,,0001.0002.0001 This attribute defines the firmware version of chassis management controller 1.
.1.3.6.1.4.1.674.10892.2.1.2.2,DELL-RAC-MIB::drsiKVMFirmwareVersion,OCTET,read-only,,mandatory,,0001.0002.0002 This attribute defines the firmware version of the iKVM. 
.1.3.6.1.4.1.674.10892.2.1.2.3,DELL-RAC-MIB::drsFirmwareVersion2,OCTET,read-only,,mandatory,,0001.0002.0003 This attribute defines the firmware version of chassis management controller 2.
.1.3.6.1.4.1.674.10892.2.2,DELL-RAC-MIB::drsStatusGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.2.1,DELL-RAC-MIB::drsGlobalSystemStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0002.0001.0001 This attribute defines the overall chassis status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3,DELL-RAC-MIB::drsChassisStatusGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.3.1,DELL-RAC-MIB::drsStatusNowGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.3.1.1,DELL-RAC-MIB::drsGlobalCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0001 This attribute defines the overall chassis status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.2,DELL-RAC-MIB::drsIOMCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0002 This attribute defines the IOM subsystem status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.3,DELL-RAC-MIB::drsKVMCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0003 This attribute defines the iKVM subsystem health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.4,DELL-RAC-MIB::drsRedCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0004 This attribute defines the Redundancy status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.5,DELL-RAC-MIB::drsPowerCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0005 This attribute defines the power subsystem health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.6,DELL-RAC-MIB::drsFanCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0006 This attribute defines the Fan subsystem health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.7,DELL-RAC-MIB::drsBladeCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0007 This attribute defines the Blade subsystem health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.8,DELL-RAC-MIB::drsTempCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0008 This attribute defines the Temp Sensor subsystem health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.9,DELL-RAC-MIB::drsCMCCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0009 This attribute defines the CMC health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.10,DELL-RAC-MIB::drsChassisFrontPanelAmbientTemperature,INTEGER,read-only,,mandatory,,0003.0001.0010 This attribute defines the ambient temperature reading (in degrees Celsius) for the chassis front panel controller.
.1.3.6.1.4.1.674.10892.2.3.1.11,DELL-RAC-MIB::drsCMCAmbientTemperature,INTEGER,read-only,,mandatory,,0003.0001.0011 This attribute defines the ambient temperature reading (in degrees Celsius) for the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.1.12,DELL-RAC-MIB::drsCMCProcessorTemperature,INTEGER,read-only,,mandatory,,0003.0001.0012 This attribute defines the temperature reading (in degrees Celsius) for the chassis management card processor.
.1.3.6.1.4.1.674.10892.2.3.2,DELL-RAC-MIB::drsStatusPrevGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.3.2.1,DELL-RAC-MIB::drsGlobalPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0002.0001 This attribute defines the previous chassis status recorded by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.2,DELL-RAC-MIB::drsIOMPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0002.0002 This attribute defines the previous IOM subsystem status recorded by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.3,DELL-RAC-MIB::drsKVMPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0002.0003 This attribute defines the previous iKVM subsystem health status recorded by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.4,DELL-RAC-MIB::drsRedPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0002.0004 This attribute defines the previous Redundancy status recorded by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.5,DELL-RAC-MIB::drsPowerPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0002.0005 This attribute defines the previous power subsystem health status recorded by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.6,DELL-RAC-MIB::drsFanPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0002.0006 This attribute defines the previous Fan health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.7,DELL-RAC-MIB::drsBladePrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0002.0007 This attribute defines the previous Blade subsystem health status recorded by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.8,DELL-RAC-MIB::drsTempPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0008 This attribute defines the Temp Sensor health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.2.9,DELL-RAC-MIB::drsCMCPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0003.0001.0009 This attribute defines the CMC health status being monitored by the chassis management card.
.1.3.6.1.4.1.674.10892.2.3.3,DELL-RAC-MIB::drsStatusChangeGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.3.3.1,DELL-RAC-MIB::drsGlobalChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0001 This attribute defines the timestamp of the most recent  global status change.
.1.3.6.1.4.1.674.10892.2.3.3.2,DELL-RAC-MIB::drsIOMChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0002 This attribute defines the timestamp of the most recent  IOM status change.
.1.3.6.1.4.1.674.10892.2.3.3.3,DELL-RAC-MIB::drsKVMChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0003 This attribute defines the timestamp of the most recent  iKVM status change.
.1.3.6.1.4.1.674.10892.2.3.3.4,DELL-RAC-MIB::drsRedChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0004 This attribute defines the timestamp of the most recent  Redundancy status change.
.1.3.6.1.4.1.674.10892.2.3.3.5,DELL-RAC-MIB::drsPowerChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0005 This attribute defines the timestamp of the most recent  power health status change.
.1.3.6.1.4.1.674.10892.2.3.3.6,DELL-RAC-MIB::drsFanChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0006 This attribute defines the timestamp of the most recent  Fan health status change.
.1.3.6.1.4.1.674.10892.2.3.3.7,DELL-RAC-MIB::drsBladeChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0007 This attribute defines the timestamp of the most recent  Blade health status change.
.1.3.6.1.4.1.674.10892.2.3.3.8,DELL-RAC-MIB::drsTempChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0008 This attribute defines the timestamp of the most recent  Temp Sensor health status change.
.1.3.6.1.4.1.674.10892.2.3.3.9,DELL-RAC-MIB::drsCMCChangeTime,TimeTicks,read-only,,mandatory,,0003.0003.0009 This attribute defines the timestamp of the most recent  CMC health status change.
.1.3.6.1.4.1.674.10892.2.4,DELL-RAC-MIB::drsChassisPowerGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.4.1,DELL-RAC-MIB::drsCMCPowerTable,,not-accessible,,mandatory,,0004.0001 This object defines the CMC power table.
.1.3.6.1.4.1.674.10892.2.4.1.1,DELL-RAC-MIB::drsCMCPowerTableEntry,,not-accessible,drsChassisIndex,mandatory,,0004.0001.0001 This object defines the CMC power table entry.
.1.3.6.1.4.1.674.10892.2.4.1.1.1,DELL-RAC-MIB::drsChassisIndex,INTEGER,read-only,,mandatory,,0004.0001.0001.0001 This attribute defines the index
.1.3.6.1.4.1.674.10892.2.4.1.1.2,DELL-RAC-MIB::drsPotentialPower,OCTET,read-only,,mandatory,,0004.0001.0001.0002 This attribute defines the power (in Watts) required by
.1.3.6.1.4.1.674.10892.2.4.1.1.3,DELL-RAC-MIB::drsIdlePower,OCTET,read-only,,mandatory,,0004.0001.0001.0003 This attribute defines the power (in Watts) required by 
.1.3.6.1.4.1.674.10892.2.4.1.1.4,DELL-RAC-MIB::drsMaxPowerSpecification,OCTET,read-only,,mandatory,,0004.0001.0001.0004 This attribute defines the power limit (in Watts) 
.1.3.6.1.4.1.674.10892.2.4.1.1.5,DELL-RAC-MIB::drsPowerSurplus,OCTET,read-only,,mandatory,,0004.0001.0001.0005 This attribute defines the power surplus (in Watts)
.1.3.6.1.4.1.674.10892.2.4.1.1.6,DELL-RAC-MIB::drsKWhCumulative,OCTET,read-only,,mandatory,,0004.0001.0001.0006 This attribute defines the cumulative chassis power
.1.3.6.1.4.1.674.10892.2.4.1.1.7,DELL-RAC-MIB::drsKWhCumulativeTime,OCTET,read-only,,mandatory,,0004.0001.0001.0007 This attribute defines the timestamp of the most recent
.1.3.6.1.4.1.674.10892.2.4.1.1.8,DELL-RAC-MIB::drsWattsPeakUsage,OCTET,read-only,,mandatory,,0004.0001.0001.0008 This attribute defines the chassis peak power
.1.3.6.1.4.1.674.10892.2.4.1.1.9,DELL-RAC-MIB::drsWattsPeakTime,OCTET,read-only,,mandatory,,0004.0001.0001.0009 This attribute defines the timestamp of the most recent
.1.3.6.1.4.1.674.10892.2.4.1.1.10,DELL-RAC-MIB::drsWattsMinUsage,OCTET,read-only,,mandatory,,0004.0001.0001.0010 This attribute defines the chassis mimimum power
.1.3.6.1.4.1.674.10892.2.4.1.1.11,DELL-RAC-MIB::drsWattsMinTime,OCTET,read-only,,mandatory,,0004.0001.0001.0011 This attribute defines the timestamp of the most recent
.1.3.6.1.4.1.674.10892.2.4.1.1.12,DELL-RAC-MIB::drsWattsResetTime,OCTET,read-only,,mandatory,,0004.0001.0001.0012 This attribute defines the timestamp of the most recent
.1.3.6.1.4.1.674.10892.2.4.1.1.13,DELL-RAC-MIB::drsWattsReading,OCTET,read-only,,mandatory,,0004.0001.0001.0013 This attribute defines the instantaneous chassis power
.1.3.6.1.4.1.674.10892.2.4.1.1.14,DELL-RAC-MIB::drsAmpsReading,OCTET,read-only,,mandatory,,0004.0001.0001.0014 This attribute defines the instantaneous chassis current
.1.3.6.1.4.1.674.10892.2.4.2,DELL-RAC-MIB::drsCMCPSUTable,,not-accessible,,mandatory,,0004.0002 This object defines the CMC PSU table.
.1.3.6.1.4.1.674.10892.2.4.2.1,DELL-RAC-MIB::drsCMCPSUTableEntry,,not-accessible,drsPSUChassisIndex:drsPSUIndex,mandatory,,0004.0002.0001 This object defines the CMC PSU table entry.
.1.3.6.1.4.1.674.10892.2.4.2.1.1,DELL-RAC-MIB::drsPSUChassisIndex,INTEGER,read-only,,mandatory,,0004.0002.0001.0001 This attribute defines the index
.1.3.6.1.4.1.674.10892.2.4.2.1.2,DELL-RAC-MIB::drsPSUIndex,INTEGER,read-only,,mandatory,,0004.0002.0001.0002 This attribute defines the index
.1.3.6.1.4.1.674.10892.2.4.2.1.3,DELL-RAC-MIB::drsPSULocation,OCTET,read-only,,mandatory,,0004.0002.0001.0003 This attribute defines the location
.1.3.6.1.4.1.674.10892.2.4.2.1.4,DELL-RAC-MIB::drsPSUMonitoringCapable,INTEGER,read-only,,mandatory,absent(1):none(2):basic(3),0004.0002.0001.0004 This attribute defines the PSU Monitoring
.1.3.6.1.4.1.674.10892.2.4.2.1.5,DELL-RAC-MIB::drsPSUVoltsReading,OCTET,read-only,,mandatory,,0004.0002.0001.0005 This attribute defines the instantaneous
.1.3.6.1.4.1.674.10892.2.4.2.1.6,DELL-RAC-MIB::drsPSUAmpsReading,OCTET,read-only,,mandatory,,0004.0002.0001.0006 This attribute defines the instantaneous
.1.3.6.1.4.1.674.10892.2.4.2.1.7,DELL-RAC-MIB::drsPSUWattsReading,OCTET,read-only,,mandatory,,0004.0002.0001.0007 This attribute defines the instantaneous
.1.3.6.1.4.1.674.10892.2.5,DELL-RAC-MIB::drsChassisServerGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.5.1,DELL-RAC-MIB::drsCMCServerTable,,not-accessible,,mandatory,,0005.0001 This object defines the CMC server table.
.1.3.6.1.4.1.674.10892.2.5.1.1,DELL-RAC-MIB::drsCMCServerTableEntry,,not-accessible,drsServerIndex,mandatory,,0005.0001.0001 This object defines the CMC server table entry.
.1.3.6.1.4.1.674.10892.2.5.1.1.1,DELL-RAC-MIB::drsServerIndex,INTEGER,read-only,,mandatory,,0005.0001.0001.0001 This attribute defines the index
.1.3.6.1.4.1.674.10892.2.5.1.1.2,DELL-RAC-MIB::drsServerMonitoringCapable,INTEGER,read-only,,mandatory,absent(1):none(2):basic(3):off(4),0005.0001.0001.0002 This attribute defines the server monitoring
.1.3.6.1.4.1.674.10892.2.5.1.1.3,DELL-RAC-MIB::drsServerServiceTag,OCTET,read-only,,mandatory,,0005.0001.0001.0003 This attribute defines the Service Tag
.1.3.6.1.4.1.674.10892.2.5.1.1.4,DELL-RAC-MIB::drsServerSlotName,OCTET,read-only,,mandatory,,0005.0001.0001.0004 This attribute defines the Slot Name
.1.3.6.1.4.1.674.10892.2.5.1.1.5,DELL-RAC-MIB::drsServerSlotNumber,OCTET,read-only,,mandatory,,0005.0001.0001.0005 This attribute defines the Chassis
.1.3.6.1.4.1.674.10892.2.5.1.1.6,DELL-RAC-MIB::drsServerNodeID,OCTET,read-only,,mandatory,,0005.0001.0001.0006 This attribute defines the Node ID
.1.3.6.1.4.1.674.10892.2.5.1.1.7,DELL-RAC-MIB::drsServerModel,OCTET,read-only,,mandatory,,0005.0001.0001.0007 This attribute defines the Model
.1.3.6.1.4.1.674.10892.2.5.1.1.8,DELL-RAC-MIB::drsServerAssetTag,OCTET,read-only,,mandatory,,0005.0001.0001.0008 This attribute defines the Asset Tag
.1.3.6.1.4.1.674.10892.2.5.1.1.9,DELL-RAC-MIB::drsServerNumStorageControllers,INTEGER,read-only,,mandatory,,0005.0001.0001.0009 This attribute defines the number of
.1.3.6.1.4.1.674.10892.2.5.1.1.10,DELL-RAC-MIB::drsServerStorageMode,INTEGER,read-only,,mandatory,notApplicable(1):joined(2):splitDualHost(3):splitSingleHost(4):unknown(99),0005.0001.0001.0010 This attribute defines the Storage
.1.3.6.1.4.1.674.10892.2.5.1.1.11,DELL-RAC-MIB::drsServerIntrusionState,INTEGER,read-only,,mandatory,notApplicable(1):closed(2):open(3):unknown(99),0005.0001.0001.0011 This attribute defines the Intrusion
.1.3.6.1.4.1.674.10892.2.5.1.1.12,DELL-RAC-MIB::drsServerAssignedServerSlots,OCTET,read-only,,mandatory,,0005.0001.0001.0012 This attribute defines the the server
.1.3.6.1.4.1.674.10892.2.6,DELL-RAC-MIB::storageDetailsGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.6.1,DELL-RAC-MIB::software,,,,,,
.1.3.6.1.4.1.674.10892.2.6.1.20,DELL-RAC-MIB::storageManagement,,,,,,
.1.3.6.1.4.1.674.10892.2.6.1.20.130,DELL-RAC-MIB::physicalDevices,,,,,,
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1,DELL-RAC-MIB::controllerTable,,not-accessible,,mandatory,,A table of managed RAID controllers. The number of entries is related to number of RAID controllers discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1,DELL-RAC-MIB::controllerTableEntry,,not-accessible,controllerNumber,mandatory,,An entry in the table of RAID controllers. A row in this table  cannot be created or deleted by SNMP operations on columns of  the table.
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.1,DELL-RAC-MIB::controllerNumber,INTEGER,read-only,,mandatory,,Instance number of this controller entry.
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.2,DELL-RAC-MIB::controllerName,OCTET,read-only,,mandatory,,The controller's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.7,DELL-RAC-MIB::controllerRebuildRate,INTEGER,read-only,,mandatory,,The rebuild rate is the percentage of the controller's  resources dedicated to rebuilding a failed disk when a rebuild  is necessary. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.8,DELL-RAC-MIB::controllerFWVersion,OCTET,read-only,,mandatory,,The controller's current firmware version. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.9,DELL-RAC-MIB::controllerCacheSizeInMB,INTEGER,read-only,,mandatory,,The controller's current amount of cache memory in megabytes.  
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.37,DELL-RAC-MIB::controllerRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the controller state.  This is the combined status of the controller and its components. Possible values: 1: Other. 2: Unknown. 3: OK  4: Non-critical  5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.38,DELL-RAC-MIB::controllerComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the controller itself without the  propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK  4: Non-critical  5: Critical 6: Non-recoverable
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.41,DELL-RAC-MIB::controllerDriverVersion,OCTET,read-only,,mandatory,,Currently installed driver version for this controller on the host. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.42,DELL-RAC-MIB::controllerPCISlot,OCTET,read-only,,mandatory,,The PCI slot on the server where the controller is seated. This  data is not reported for embedded or integrated controllers,  
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.48,DELL-RAC-MIB::controllerReconstructRate,INTEGER,read-only,,mandatory,,The reconstruct rate is the percentage of the controller's resources  dedicated to reconstructing a disk group after adding a physical disk  or changing the RAID level of a virtual disk residing on the disk  group. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.49,DELL-RAC-MIB::controllerPatrolReadRate,INTEGER,read-only,,mandatory,,The patrol read rate is the percentage of the controller's  resources dedicated to perform a patrol read on disks participating in a virtual disk or hot spares. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.50,DELL-RAC-MIB::controllerBGIRate,INTEGER,read-only,,mandatory,,The background initialization (BGI) rate is the percentage of the  controller's resources dedicated to performing the background  initialization of a redundant virtual disk after it is created. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.51,DELL-RAC-MIB::controllerCheckConsistencyRate,INTEGER,read-only,,mandatory,,The check consistency rate is the percentage of the  controller's resources dedicated to performing a check consistency  on a redundant virtual disk. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.52,DELL-RAC-MIB::controllerPatrolReadMode,INTEGER,read-only,,mandatory,other(1):notSupported(2):disabled(3):auto(4):manual(5),Identifies the patrol read mode setting for the controller. Possible values: 1: Not one of the following or could not be determined. 2: Not Supported on this controller.  3: Disabled. 4: Automatic. 5: Manual. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.53,DELL-RAC-MIB::controllerPatrolReadState,INTEGER,read-only,,mandatory,other(1):stopped(2):active(3),This property displays the current state of the patrol read process. Possible values: 1: Not one of the following or could not be determined. 2: Patrol read is not running. 3: Patrol read is running. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.59,DELL-RAC-MIB::controllerPersistentHotSpare,INTEGER,read-only,,mandatory,,Indicates whether hot spare drives would be restored on insertion  into the same slot. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.60,DELL-RAC-MIB::controllerSpinDownUnconfiguredDrives,INTEGER,read-only,,mandatory,,Indicates whether un-configured drives would be put in power save mode by the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.61,DELL-RAC-MIB::controllerSpinDownHotSpareDrives,INTEGER,read-only,,mandatory,,Indicates whether hot spare drives would be put in power save mode by the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.62,DELL-RAC-MIB::controllerSpinDownTimeInterval,INTEGER,read-only,,mandatory,,The duration in minutes after which, the unconfigured or hot  spare drives will be spun down to power save mode. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.69,DELL-RAC-MIB::controllerPreservedCache,INTEGER,read-only,,mandatory,,Indicates whether preserved cache or pinned cache is  present on the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.70,DELL-RAC-MIB::controllerCheckConsistencyMode,INTEGER,read-only,,mandatory,other(1):unsupported(2):normal(3):stopOnError(4),The current check consistency mode setting  for the controller. Possible values: 1: Not one of the following. 2: Not supported on this controller. 3: Normal check consistency operation. 4: Check consistency operation will stop on encountering  an error. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.71,DELL-RAC-MIB::controllerCopyBackMode,INTEGER,read-only,,mandatory,other(1):unsupported(2):on(3):onWithSmart(4):off(5),The current copy back mode setting  for the controller. Possible values: 1: Not one of the following. 2: Not supported on this controller. 3: Disks assigned as spares could revert back to spare status. 4: Data from physical disk participating in a  virtual disk could be automatically copied to the assigned  hot spare in case former has a predictive failure event.  5: Copyback mode is disabled.  
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.72,DELL-RAC-MIB::controllerSecurityStatus,INTEGER,read-only,,mandatory,unknown(1):none(2):lkm(3),The controller's current security/encryption status.. Possible values: 1: The current status could not be determined. 2: Controller is not operating in an encryption mode. 3: Controller is operating in the Local Key Management (LKM) encryption mode. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.73,DELL-RAC-MIB::controllerEncryptionKeyPresent,INTEGER,read-only,,mandatory,,Indicates whether encryption key is assigned for the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.74,DELL-RAC-MIB::controllerEncryptionCapability,INTEGER,read-only,,mandatory,other(1):none(2):lkm(3),The type of encryption supported by the controller. Possible values: 1: Not one of the following. 2: No encryption supported,  3: Local Key Management, 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.75,DELL-RAC-MIB::controllerLoadBalanceSetting,INTEGER,read-only,,mandatory,other(1):unsupported(2):auto(3):none(4),The ability of the controller to automatically use both  controller ports (or connectors) connected to the same enclosure in  order to route I/O requests. Possible values: 1: Not one of the following. 2: Not supported. 3: Automatic load balancing is active. 4: Load balancing is inactive. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.76,DELL-RAC-MIB::controllerMaxCapSpeed,INTEGER,read-only,,mandatory,unknown(1):oneDotFiveGbps(2):threeGbps(3):sixGbps(4):twelveGbps(5),The maximum speed of the controller.in  Gigbits per second (Gbps). Possible values: 1: The speed could not be determined. 2. 1.5 Gbps 3: 3.0 Gbps 4: 6.0 Gbps 5: 12.0 Gbps 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.77,DELL-RAC-MIB::controllerSASAddress,OCTET,read-only,,mandatory,,The SAS address of the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.78,DELL-RAC-MIB::controllerFQDD,OCTET,read-only,,mandatory,,The controller's Fully Qualified Device Descriptor (FQDD) as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.79,DELL-RAC-MIB::controllerDisplayName,OCTET,read-only,,mandatory,,The controller's friendly FQDD as represented in Storage  Management.
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.80,DELL-RAC-MIB::controllerT10PICapability,INTEGER,read-only,,mandatory,other(1):capable(2):notCapable(3),Indicates whether the controller supports the T10 PI (Protection  Information). These protection fields are known as DIF (Data Integrity Fields). Possible values: 1: Not one of the following. 2: Capable of supporting T10 PI. 3: Not capable of supporting T10 PI. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.81,DELL-RAC-MIB::controllerRAID10UnevenSpansSupported,INTEGER,read-only,,mandatory,,Indicates whether uneven spans for RAID 10 virtual disk  is supported on the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.82,DELL-RAC-MIB::controllerEnhancedAutoImportForeignConfigMode,INTEGER,read-only,,mandatory,other(1):notSupported(2):disabled(3):enabled(4),Indicates the status of enhanced auto-import of foreign  configuration property of the controller. 1: Not one of the following. 2: Not Supported. 3: Disabled. 4: Enabled. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.83,DELL-RAC-MIB::controllerBootModeSupported,INTEGER,read-only,,mandatory,,Indicates whether headless boot mode settings are supported  on the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.84,DELL-RAC-MIB::controllerBootMode,INTEGER,read-only,,mandatory,notApplicable(1):user(2):contOnError(3):headlessContOnError(4):headlessSafe(5),Indicates the boot mode of the controller. Possible values: 1: Not applicable for this controller. 2: User mode: User interaction required for all boot messages (not  applicable for uEFI environments). 3: Continue Boot On Error. User interaction only required for  critical messages. 4: Headless Mode Continue On Error. User interaction is not required. Controller boot may halt on Error. 5: Headless Safe Mode. Controller shall boot to safe mode on critical errors. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.85,DELL-RAC-MIB::controllerHighAvailabilityMode,INTEGER,read-only,,mandatory,none(1):faultTolerantActivePassive(2):faultTolerantActiveActive(3):degraded(4),Indicates the fault-tolerant mode of the controller. Possible values: 1: None 2: Fault Tolerant(Active/Passive) 3: Fault Tolerant(Active/Active) 4: Degraded 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.86,DELL-RAC-MIB::controllerPeerController,OCTET,read-only,,mandatory,,The peer controller's Fully Qualified Device Descriptor (FQDD) as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.87,DELL-RAC-MIB::controllerEncryptionKeyIdentifier,OCTET,read-only,,mandatory,,Displays the encryption security key identifier of the controller, if the controller is encryption enabled and a security key is configured for the controller.
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3,DELL-RAC-MIB::enclosureTable,,not-accessible,,mandatory,,A table of managed enclosures/backplanes. The number of entries is  related to number of internal backplane(s) discovered in the system  and external storage enclosure(s) attached to the system.. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1,DELL-RAC-MIB::enclosureTableEntry,,not-accessible,enclosureNumber,mandatory,,An entry in the enclosure table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.1,DELL-RAC-MIB::enclosureNumber,INTEGER,read-only,,mandatory,,Instance number of this enclossre/backplane. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.2,DELL-RAC-MIB::enclosureName,OCTET,read-only,,mandatory,,The enclosure/backplane's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.4,DELL-RAC-MIB::enclosureState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5):foreign(6):offline(7):online(8):blocked(9),The current state of this enclosure/backplane. Possible states: 1: The current state could not be determined. 2: The enclosure is operating normally. 3: The enclosure has encountered a hardware problem or is not  responding. 4: The enclosure is no longer connected to the controller or  there exists a problem communicating to the enclosure. 5: The enclosure is unstable. 6: The enclosure is inactive due to being configured by another controller. 7: The enclosure is offline and inaccessible.  8: The enclosure is online and accessible. 9: The enclosure is currently blocked by another controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.8,DELL-RAC-MIB::enclosureServiceTag,OCTET,read-only,,mandatory,,Enclosure identification used when consulting customer support. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.9,DELL-RAC-MIB::enclosureAssetTag,OCTET,read-only,,mandatory,,The asset tag information for the enclosure.
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.19,DELL-RAC-MIB::enclosureConnectedPort,OCTET,read-only,,mandatory,,The port on the controller to which the  storage enclosure is connected. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.23,DELL-RAC-MIB::enclosureRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the enclosure/backplane state. This is the combined status of the enclosure and its sub-components. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical. 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.24,DELL-RAC-MIB::enclosureComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure/backplane.itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.26,DELL-RAC-MIB::enclosureFirmwareVersion,OCTET,read-only,,mandatory,,The firmware information for the enclosure/backplane. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.30,DELL-RAC-MIB::enclosureSASAddress,OCTET,read-only,,mandatory,,The SAS address of the enclosure/backplane. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.31,DELL-RAC-MIB::enclosureDriveCount,INTEGER,read-only,,mandatory,,The number of disks present in the enclosure/backplane. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.32,DELL-RAC-MIB::enclosureTotalSlots,INTEGER,read-only,,mandatory,,The total physical drive slots in a storage enclosure  or server backplane. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.40,DELL-RAC-MIB::enclosureFanCount,OCTET,read-only,,mandatory,,The number of fans present in the storage enclosure. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.41,DELL-RAC-MIB::enclosurePSUCount,OCTET,read-only,,mandatory,,The number of Power Supply Units (PSU) present  in the storage enclosure. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.42,DELL-RAC-MIB::enclosureEMMCount,OCTET,read-only,,mandatory,,The number of Enclosure Management Modules (EMM)  present in the storage enclosure. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.43,DELL-RAC-MIB::enclosureTempProbeCount,OCTET,read-only,,mandatory,,The number of temperature sensing devices  present in the storage enclosure. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.44,DELL-RAC-MIB::enclosureRedundantPath,OCTET,read-only,,mandatory,,Indicates whether the controller has multiply paths to  reach the storage enclosure. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.45,DELL-RAC-MIB::enclosurePosition,OCTET,read-only,,mandatory,,The possition of the storage enclosure within a daisy chain. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.46,DELL-RAC-MIB::enclosureBackplaneBayID,OCTET,read-only,,mandatory,,The unique bay ID of the backplane. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.47,DELL-RAC-MIB::enclosureFQDD,OCTET,read-only,,mandatory,,The enclosure/backplane's Fully Qualified Device Descriptor (FQDD)  as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.48,DELL-RAC-MIB::enclosureDisplayName,OCTET,read-only,,mandatory,,The enclosure/backplane's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.49,DELL-RAC-MIB::enclosureType,INTEGER,read-only,,mandatory,other(1):notApplicable(2):sassata(3):pcie(4):universal(5),The protocol supported by the backplane. Possible states: 1: Not one of the following or could not be determined. 2: Not applicable (i.e. object is not a backplane). 3: Supports SAS/SATA. 4: Supports PCIe. 5: Both SAS/SATA and PCIe. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4,DELL-RAC-MIB::physicalDiskTable,,not-accessible,,mandatory,,A table of managed physical disks. The number of entries is  related to number of physical Disks discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to  all entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1,DELL-RAC-MIB::physicalDiskTableEntry,,not-accessible,physicalDiskNumber,mandatory,,An entry in the physical Disk table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.1,DELL-RAC-MIB::physicalDiskNumber,INTEGER,read-only,,mandatory,,Instance number of this physical disk entry. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.2,DELL-RAC-MIB::physicalDiskName,OCTET,read-only,,mandatory,,The physical disk's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.3,DELL-RAC-MIB::physicalDiskManufacturer,OCTET,read-only,,mandatory,,The name of the physical disk's manufacturer. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.4,DELL-RAC-MIB::physicalDiskState,INTEGER,read-only,,mandatory,unknown(1):ready(2):online(3):foreign(4):offline(5):blocked(6):failed(7):nonraid(8):removed(9):readonly(10),The current state of this physical disk. Possible states: 1: The current state could not be determined. 2: The physical disk is available for use, but no RAID configuration  has been assigned.  3: A RAID configuration has been assigned to the physical disk. 4: The physical disk has been moved from another controller and contains all or some portion of a virtual disk. 5: The physical disk is not available to the RAID controller.  6: The physical disk is currently blocked by controller. 7: The physical disk is not operational. 8: The physical disk is not a RAID capable disk  9: The physical disk has been removed. 10:The physical disk media has been placed in read only mode. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.6,DELL-RAC-MIB::physicalDiskProductID,OCTET,read-only,,mandatory,,The model number of the physical disk. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.7,DELL-RAC-MIB::physicalDiskSerialNo,OCTET,read-only,,mandatory,,The physical disk's unique identification number  from the manufacturer. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.8,DELL-RAC-MIB::physicalDiskRevision,OCTET,read-only,,mandatory,,The firmware version of the physical disk. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.11,DELL-RAC-MIB::physicalDiskCapacityInMB,INTEGER,read-only,,mandatory,,The size of the physical disk in megabytes. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.17,DELL-RAC-MIB::physicalDiskUsedSpaceInMB,INTEGER,read-only,,mandatory,,The amount of used space in megabytes on the physical disk. This is not applicable for NVMe devices. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.19,DELL-RAC-MIB::physicalDiskFreeSpaceInMB,INTEGER,read-only,,mandatory,,The amount of free space in megabytes on the physical disk. This is not applicable for NVMe devices. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.21,DELL-RAC-MIB::physicalDiskBusType,INTEGER,read-only,,mandatory,unknown(1):scsi(2):sas(3):sata(4):fibre(5):pcie(6),The bus type of the physical disk. Possible values: 1: The bus type could not be determined. 2: Small Computer System Interface (SCSI). 3: Serial Attached SCSI (SAS). 4: Serial Advanced Technology Attachment (SATA). 5: Fibre channel. 6: PCIe. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.22,DELL-RAC-MIB::physicalDiskSpareState,INTEGER,read-only,,mandatory,notASpare(1):dedicatedHotSpare(2):globalHotSpare(3),The status of the disk as a spare. Possible values: 1: Physical disk is not a spare. 2: Physical disk is a dedicated hot spare. 3: Physical disk is a global hot spare. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.24,DELL-RAC-MIB::physicalDiskComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the physical disk itself without the  propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK  4: Non-critical  5: Critical 6: Non-recoverable 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.27,DELL-RAC-MIB::physicalDiskPartNumber,OCTET,read-only,,mandatory,,The part number of the disk. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.28,DELL-RAC-MIB::physicalDiskSASAddress,OCTET,read-only,,mandatory,,The SAS address of the physical disk. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.29,DELL-RAC-MIB::physicalDiskNegotiatedSpeed,INTEGER,read-only,,mandatory,unknown(1):oneDotFiveGbps(2):threeGbps(3):sixGbps(4):twelveGbps(5):fiveGTps(6):eightGTps(7),The data transfer speed that the disk negotiated while spinning up  in Gigbits per second (Gbps). Possible values: 1: The speed could not be determined. 2. 1.5 Gbps 3: 3.0 Gbps 4: 6.0 Gbps 5: 12.0 Gbps 6: 5 GT/s (applicable for NVMe devices). 7: 8 GT/s (applicable for NVMe devices). 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.30,DELL-RAC-MIB::physicalDiskCapableSpeed,INTEGER,read-only,,mandatory,unknown(1):oneDotFiveGbps(2):threeGbps(3):sixGbps(4):twelveGbps(5):fiveGTps(6):eightGTps(7),The maximum data transfer speed supported by the disk  in Gigbits per second (Gbps). Possible values: 1: The speed could not be determined. 2. 1.5 Gbps 3: 3.0 Gbps 4: 6.0 Gbps 5: 12.0 Gbps 6: 5 GT/s (applicable for NVMe devices). 7: 8 GT/s (applicable for NVMe devices). 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.31,DELL-RAC-MIB::physicalDiskSmartAlertIndication,INTEGER,read-only,,mandatory,,Indicates whether the physical disk has received a predictive  failure alert. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.32,DELL-RAC-MIB::physicalDiskManufactureDay,OCTET,read-only,,mandatory,,The day of the week (1=Sunday thru 7=Saturday)  on which the physical disk was manufactured. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.33,DELL-RAC-MIB::physicalDiskManufactureWeek,OCTET,read-only,,mandatory,,The week (1 thru 53) in which the physical disk  was manufactured. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.34,DELL-RAC-MIB::physicalDiskManufactureYear,OCTET,read-only,,mandatory,,The four digit year in which the physical disk was manufactured. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.35,DELL-RAC-MIB::physicalDiskMediaType,INTEGER,read-only,,mandatory,unknown(1):hdd(2):ssd(3),The media type of the physical disk. Possible Values: 1: The media type could not be determined. 2: Hard Disk Drive (HDD). 3: Solid State Device (SSD). 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.42,DELL-RAC-MIB::physicalDiskPowerState,INTEGER,read-only,,mandatory,other(1):spunUp(2):spunDown(3):transition(4):on(5),The power state of the physical disk. Possible Values: 1: Not one of the following. 2: The physical disk is in the spun up state. 3: The physical disk is in the spun down state. 4: The physical disk is changing from spun down state to spun up state or vice versa. 5: The Solid State Device (SSD) is powered on. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.49,DELL-RAC-MIB::physicalDiskRemainingRatedWriteEndurance,INTEGER,read-only,,mandatory,,This property is applicable to SSD media type only. This indicates  the wear-out percentage of the SSD. Typically it is a value between  0 to 100. However, if the value is not available or not applicable  (in the case of HDD media type) the value will be 255. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.50,DELL-RAC-MIB::physicalDiskOperationalState,INTEGER,read-only,,mandatory,notApplicable(1):rebuild(2):clear(3):copyback(4),The state of the physical disk when there are progressive operations ongoing. Possible values: 1: There is no active operation running. 2: Data from a redundant virtual disk is  currently being rebuilt onto the physical disk. 3: Data on the disk is being erased. 4: Data is being copied from a hot spare disk to  the physical disk or vice versa. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.51,DELL-RAC-MIB::physicalDiskProgress,INTEGER,read-only,,mandatory,,The progress percentage of the operation that is being  performed on the physical disk. This is applicable  only if there is a progressive operations ongoing 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.52,DELL-RAC-MIB::physicalDiskSecurityStatus,INTEGER,read-only,,mandatory,supported(1):notSupported(2):secured(3):locked(4):foreign(5),The security/encryption status of the physical disk. Possible Values: 1: The physical disk supports encryption. 2: The physical disk does not support encryption 3: The physical disk is encrypted. 4: The physical disk is locked by a key. 5: The physical disk is locked by a foreign key. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.53,DELL-RAC-MIB::physicalDiskFormFactor,INTEGER,read-only,,mandatory,unknown(1):oneDotEight(2):twoDotFive(3):threeDotFive(4),The form factor of the physical disk. Possible values: 1: The form factor could not be determined. 2: 1.8 inch. 3: 2.5 inch. 4: 3.5 inch. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.54,DELL-RAC-MIB::physicalDiskFQDD,OCTET,read-only,,mandatory,,The physical disk's Fully Qualified Device Descriptor (FQDD)  as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.55,DELL-RAC-MIB::physicalDiskDisplayName,OCTET,read-only,,mandatory,,The physical disk's friendly FQDD as represented in Storage  Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.57,DELL-RAC-MIB::physicalDiskT10PICapability,INTEGER,read-only,,mandatory,other(1):capable(2):notCapable(3),Indicates whether the physical disk supports the T10 PI (Protection  Information). These protection fields are known as DIF  (Data Integrity Fields). Possible values: 1: Not one of the following. 2: Capable of supporting T10 PI. 3: Not capable of supporting T10 PI. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.58,DELL-RAC-MIB::physicalDiskBlockSizeInBytes,INTEGER,read-only,,mandatory,,The block size (in bytes) of the physical disk. This is not  applicable for NVMe devices. Possible values: 1: 512. 2: 4096 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.59,DELL-RAC-MIB::physicalDiskProtocolVersion,OCTET,read-only,,mandatory,,Applicable for NVMe devices only. The NVMe protocol version supported  by the device. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.60,DELL-RAC-MIB::physicalDiskPCIeNegotiatedLinkWidth,INTEGER,read-only,,mandatory,other(1):notApplicable(2):byOne(3):byTwp(4):byFour(5):byEight(6):bySixteen(7):byThirtyTwp(8),Applicable for NVMe devices only. The PCIe link width negotiated with the host during device initialization. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.61,DELL-RAC-MIB::physicalDiskPCIeCapableLinkWidth,INTEGER,read-only,,mandatory,other(1):notApplicable(2):byOne(3):byTwp(4):byFour(5):byEight(6):bySixteen(7):byThirtyTwp(8),Applicable for NVMe devices only. The PCIe link widths the device is capable of  supporting. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.62,DELL-RAC-MIB::physicalDiskCurrentActiveController,OCTET,read-only,,mandatory,,Indicates the Fully Qualified Device Descriptor (FQDD) of  the current active controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.63,DELL-RAC-MIB::physicalDiskFailoverController,OCTET,read-only,,mandatory,,Indicates the Fully Qualified Device Descriptor (FQDD) of  the failover controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.64,DELL-RAC-MIB::physicalDiskForeignKeyIdentifier,OCTET,read-only,,mandatory,,Displays the encryption key identifier of the physical disk if it is in locked or foreign state.
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7,DELL-RAC-MIB::enclosureFanTable,,not-accessible,,mandatory,,A table of managed fans in the external storage enclosure(s).  The number of entries is related to number of fans discovered in  the enclosure(s). The maximum number of entries is implementation  dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1,DELL-RAC-MIB::enclosureFanTableEntry,,not-accessible,enclosureFanNumber,mandatory,,An entry in the fan table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.1,DELL-RAC-MIB::enclosureFanNumber,INTEGER,read-only,,mandatory,,Instance number of this fan. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.2,DELL-RAC-MIB::enclosureFanName,OCTET,read-only,,mandatory,,The fan's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.4,DELL-RAC-MIB::enclosureFanState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this fan. Possible states: 1: The current state could not be determined. 2: The fan is operating normally. 3: The fan has encountered a hardware problem or is not  responding. 4: The fan is no longer connected to the enclosure or  there exists a problem communicating to it. 5: The fan is unstable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.11,DELL-RAC-MIB::enclosureFanSpeed,INTEGER,read-only,,mandatory,,Indicates the current relative speed of the fan in RPMs. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.15,DELL-RAC-MIB::enclosureFanComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the fan itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.20,DELL-RAC-MIB::enclosureFanFQDD,OCTET,read-only,,mandatory,,The fan's Fully Qualified Device Descriptor (FQDD)  as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.21,DELL-RAC-MIB::enclosureFanDisplayName,OCTET,read-only,,mandatory,,The fan's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9,DELL-RAC-MIB::enclosurePowerSupplyTable,,not-accessible,,mandatory,,A table of managed Power Supply Units(PSU) in the external  storage enclosure(s). The number of entries is related to number  of power supply unit(s) discovered in the enclosure(s). The  maximum number of entries is implementation  dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1,DELL-RAC-MIB::enclosurePowerSupplyTableEntry,,not-accessible,enclosurePowerSupplyNumber,mandatory,,An entry in the power supply unit table. A row in this table cannot  be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.1,DELL-RAC-MIB::enclosurePowerSupplyNumber,INTEGER,read-only,,mandatory,,Instance number of this power supply unit. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.2,DELL-RAC-MIB::enclosurePowerSupplyName,OCTET,read-only,,mandatory,,The power supply unit's name as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.4,DELL-RAC-MIB::enclosurePowerSupplyState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this power supply unit. Possible states: 1: The current state could not be determined. 2: The power supply unit is operating normally. 3: The power supply unit has encountered a hardware problem  or is not responding. 4: The power supply unit is no longer connected to the enclosure  or there exists a problem communicating to it. 5: The power supply unit is unstable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.7,DELL-RAC-MIB::enclosurePowerSupplyPartNumber,OCTET,read-only,,mandatory,,The part number of the power supply unit.  
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.9,DELL-RAC-MIB::enclosurePowerSupplyComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the power supply unit itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.15,DELL-RAC-MIB::enclosurePowerSupplyFQDD,OCTET,read-only,,mandatory,,The power supply unit's Fully Qualified Device Descriptor (FQDD) as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.16,DELL-RAC-MIB::enclosurePowerSupplyDisplayName,OCTET,read-only,,mandatory,,The power supply unit's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11,DELL-RAC-MIB::enclosureTemperatureProbeTable,,not-accessible,,mandatory,,A table of managed temperature probes in the external storage enclosure(s). The number of entries is related to number of  temperature probes discovered in the enclosure(s). The maximum  number of entries is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1,DELL-RAC-MIB::enclosureTemperatureProbeTableEntry,,not-accessible,enclosureTemperatureProbeNumber,mandatory,,An entry in the temperature probe table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.1,DELL-RAC-MIB::enclosureTemperatureProbeNumber,INTEGER,read-only,,mandatory,,Instance number of this temperature probe. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.2,DELL-RAC-MIB::enclosureTemperatureProbeName,OCTET,read-only,,mandatory,,The temperature probe's name as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.4,DELL-RAC-MIB::enclosureTemperatureProbeState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5):overWarning(6):underWarning(7),The current state of this temperature probe. Possible states: 1: The current state could not be determined. 2: The temperature probe is operating normally. 3: The temperature probe has encountered a hardware problem  or is not responding. 4: The temperature probe is no longer connected to the enclosure  or there exists a problem communicating to it. 5: The temperature probe is unstable. 6: The temperature probe is Over Warning Temperature. 7: The temperature probe is Under Warning Temperature. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.7,DELL-RAC-MIB::enclosureTemperatureProbeMinWarningValue,INTEGER,read-only,,mandatory,,The minimum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.8,DELL-RAC-MIB::enclosureTemperatureProbeMinCriticalValue,INTEGER,read-only,,mandatory,,The minimum temperature that will force the probe into a error state. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.9,DELL-RAC-MIB::enclosureTemperatureProbeMaxWarningValue,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.10,DELL-RAC-MIB::enclosureTemperatureProbeMaxCriticalValue,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.11,DELL-RAC-MIB::enclosureTemperatureProbeCurValue,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.13,DELL-RAC-MIB::enclosureTemperatureProbeComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure management module.itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.15,DELL-RAC-MIB::enclosureTemperatureProbeFQDD,OCTET,read-only,,mandatory,,The temperature probe's Fully Qualified Device Descriptor (FQDD) as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.16,DELL-RAC-MIB::enclosureTemperatureProbeDisplayName,OCTET,read-only,,mandatory,,The temperature probe's friendly FQDD as represented  in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13,DELL-RAC-MIB::enclosureManagementModuleTable,,not-accessible,,mandatory,,A table of managed Enclosure Management Modules (EMM)  in the external storage enclosure(s). The number of  entries is related to number of enclosure management modules discovered in the enclosure(s). The maximum number of entries  is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1,DELL-RAC-MIB::enclosureManagementModuleTableEntry,,not-accessible,enclosureManagementModuleNumber,mandatory,,An entry in the enclosure management module table. A row in  this table cannot be created or deleted by SNMP operations  on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.1,DELL-RAC-MIB::enclosureManagementModuleNumber,INTEGER,read-only,,mandatory,,Instance number of this enclosure management module. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.2,DELL-RAC-MIB::enclosureManagementModuleName,OCTET,read-only,,mandatory,,The enclosure management module's name as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.4,DELL-RAC-MIB::enclosureManagementModuleState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this enclosure management module. Possible states: 1: The current state could not be determined. 2: The enclosure management module is operating normally. 3: The enclosure management module has encountered a  hardware problem or is not responding. 4: The enclosure management module is no longer connected to the enclosure or there exists a problem communicating to it. 5: The enclosure management module is unstable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.6,DELL-RAC-MIB::enclosureManagementModulePartNumber,OCTET,read-only,,mandatory,,The part number of the enclosure management module. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.8,DELL-RAC-MIB::enclosureManagementModuleFWVersion,OCTET,read-only,,mandatory,,Firmware version of the enclosure management module. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.11,DELL-RAC-MIB::enclosureManagementModuleComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure management module.itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.15,DELL-RAC-MIB::enclosureManagementModuleFQDD,OCTET,read-only,,mandatory,,The enclosure management module's Fully Qualified Device  Descriptor (FQDD) as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.16,DELL-RAC-MIB::enclosureManagementModuleDisplayName,OCTET,read-only,,mandatory,,The enclosure management module's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15,DELL-RAC-MIB::batteryTable,,not-accessible,,mandatory,,A table of managed batteries. The number of  entries is related to number of Batteries discovered in the system. The maximum number of entries  is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1,DELL-RAC-MIB::batteryTableEntry,,not-accessible,batteryNumber,mandatory,,An entry in the battery table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.1,DELL-RAC-MIB::batteryNumber,INTEGER,read-only,,mandatory,,Instance number of this battery entry. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.4,DELL-RAC-MIB::batteryState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):degraded(4):missing(5):charging(6):belowThreshold(7),Current state of battery. Possible values: 1: The current state could not be determined. 2: The battery is operating normally. 3: The battery has failed and needs to be replaced. 4: The battery temperature is high or charge level is depleting. 5: The battery is missing or not detected.  6: The battery is undergoing the re-charge phase. 7: The battery voltage or charge level is below the threshold. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.6,DELL-RAC-MIB::batteryComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the battery itself without the  propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK  4: Non-critical  5: Critical 6: Non-recoverable
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.10,DELL-RAC-MIB::batteryPredictedCapacity,INTEGER,read-only,,obsolete,unknown(1):failed(2):ready(3),This entry is obsolete. Use the batteryComponentStatus or  batteryState instead. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.20,DELL-RAC-MIB::batteryFQDD,OCTET,read-only,,mandatory,,The battery's Fully Qualified Device Descriptor (FQDD) as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.21,DELL-RAC-MIB::batteryDisplayName,OCTET,read-only,,mandatory,,The battery's friendly FQDD as represented in Storage Management.
.1.3.6.1.4.1.674.10892.2.6.1.20.140,DELL-RAC-MIB::logicalDevices,,,,,,
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1,DELL-RAC-MIB::virtualDiskTable,,not-accessible,,mandatory,,A table of managed virtual disks. The number of entries is related to number of virtual disks discovered in the system.  The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1,DELL-RAC-MIB::virtualDiskTableEntry,,not-accessible,virtualDiskNumber,mandatory,,An entry in the virtual disk table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.1,DELL-RAC-MIB::virtualDiskNumber,INTEGER,read-only,,mandatory,,Instance number of this virtual disk entry. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.2,DELL-RAC-MIB::virtualDiskName,OCTET,read-only,,mandatory,,The virtual disk's label as entered by the user. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.4,DELL-RAC-MIB::virtualDiskState,INTEGER,read-only,,mandatory,unknown(1):online(2):failed(3):degraded(4),The current state of this virtual disk (which includes any member physical disks.) Possible states: 1: The current state could not be determined. 2: The virtual disk is operating normally or optimally. 3: The virtual disk has encountered a failure. The data on disk  is lost or is about to be lost. 4: The virtual disk encounterd a failure with one or all of the  constituent redundant physical disks. The data on the virtual  disk might no longer be fault tolerant. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.6,DELL-RAC-MIB::virtualDiskSizeInMB,INTEGER,read-only,,mandatory,,The size of the virtual disk in megabytes. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.10,DELL-RAC-MIB::virtualDiskWritePolicy,INTEGER,read-only,,mandatory,writeThrough(1):writeBack(2):writeBackForce(3),The write policy used by the controller for write operations on  this virtual disk. Possible values: 1: Write Through. 2: Write Back. 3: Force Write Back. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.11,DELL-RAC-MIB::virtualDiskReadPolicy,INTEGER,read-only,,mandatory,noReadAhead(1):readAhead(2):adaptiveReadAhead(3),The read policy used by the controller for read operations on  this virtual disk. Possible values: 1: No Read Ahead. 2: Read Ahead. 3: Adaptive Read Ahead. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.13,DELL-RAC-MIB::virtualDiskLayout,INTEGER,read-only,,mandatory,other(1):r0(2):r1(3):r5(4):r6(5):r10(6):r50(7):r60(8):concatRaid1(9):concatRaid5(10),The virtual disk's RAID type. Possible values: 1: Not one of the following 2: RAID-0 3: RAID-1 4: RAID-5 5: RAID-6 6: RAID-10 7: RAID-50 8: RAID-60 9: Concatenated RAID 1 10: Concatenated RAID 5 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.14,DELL-RAC-MIB::virtualDiskStripeSize,INTEGER,read-only,,mandatory,other(1):default(2):fiveHundredAndTwelvebytes(3):oneKilobytes(4):twoKilobytes(5):fourKilobytes(6):eightKilobytes(7):sixteenKilobytes(8):thirtyTwoKilobytes(9):sixtyFourKilobytes(10):oneTwentyEightKilobytes(11):twoFiftySixKilobytes(12):fiveOneTwoKilobytes(13):oneMegabye(14):twoMegabytes(15):fourMegabytes(16):eightMegabytes(17):sixteenMegabytes(18),The stripe size of this virtual disk. Possible values: 1: Not one of the following 2: Default. 3: 512 bytes 4: 1 kB, 5: 2 kB, 6: 4 kB, 7: 8 kB, 8: 16 kB, 9: 32 kB, 10: 64 kB, 11: 128 kB, 12: 256 kB, 13: 512 kB, 14: 1 MB, 15: 2 MB, 16: 4 MB, 17: 8 MB, 18: 16 MB 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.20,DELL-RAC-MIB::virtualDiskComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the virtual disk itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.23,DELL-RAC-MIB::virtualDiskBadBlocksDetected,INTEGER,read-only,,mandatory,,Indicates whether the virtual disk has bad blocks. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.24,DELL-RAC-MIB::virtualDiskSecured,INTEGER,read-only,,mandatory,,Indicates whether the virtual disk is secured or not. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.25,DELL-RAC-MIB::virtualDiskIsCacheCade,INTEGER,read-only,,mandatory,,Indicates whether the virtual disk is being used as a secondary  cache by the controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.26,DELL-RAC-MIB::virtualDiskDiskCachePolicy,INTEGER,read-only,,mandatory,enabled(1):disabled(2):defullt(3),The cache policy of the physical disks that are  part of this virtual disk  Possible values: 1: Enabled. 2: Disabled. 3: Default. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.30,DELL-RAC-MIB::virtualDiskOperationalState,INTEGER,read-only,,mandatory,notApplicable(1):reconstructing(2):resynching(3):initializing(4):backgroundInit(5),The state of the virtual disk when there are progressive operations ongoing. Possible values: 1: There is no active operation running. 2: The virtual disk configuration has changed. The physical disks included in the virtual disk are being  modified to support the new configuration. 3: A Consistency Check (CC) is being performed  on the virtual disk. 4: The virtual disk is being initialized. 5: BackGround Initialization (BGI) is being performed  on the virtual disk. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.31,DELL-RAC-MIB::virtualDiskProgress,INTEGER,read-only,,mandatory,,The progress percentage of the operation that is being  performed on the virtual disk. This is applicable  only if there is a progressive operations ongoing 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.32,DELL-RAC-MIB::virtualDiskAvailableProtocols,OCTET,read-only,,mandatory,,List of protocols support by physical disks part of this virtual disk. For e.g. SAS for Serial Attached SCSI or SATA for  Serial Advanced Technology Attachment. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.33,DELL-RAC-MIB::virtualDiskMediaType,OCTET,read-only,,mandatory,,List of media types of the physical disks part of this virtual disk. For e.g. HDD for Hard Disk Drive or SSD for Solid State Device. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.34,DELL-RAC-MIB::virtualDiskRemainingRedundancy,INTEGER,read-only,,mandatory,,The number of physical disks which can be lost before the virtual disk loses its redundancy. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.35,DELL-RAC-MIB::virtualDiskFQDD,OCTET,read-only,,mandatory,,The virtual disk's Fully Qualified Device Descriptor (FQDD) as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.36,DELL-RAC-MIB::virtualDiskDisplayName,OCTET,read-only,,mandatory,,The virtual disk's friendly FQDD as represented in Storage  Management. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.37,DELL-RAC-MIB::virtualDiskT10PIStatus,INTEGER,read-only,,mandatory,other(1):enabled(2):disabled(3),Indicates whether the virtual disk supports the T10 PI (Protection  Information). These protection fields are known as DIF  (Data Integrity Fields). Possible values: 1: Not one of the following. 2: Enabled. 3: Disabled. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.38,DELL-RAC-MIB::virtualDiskBlockSizeInBytes,INTEGER,read-only,,mandatory,,The block size (in bytes) of the physical disk part of the virtual disk. Possible values: 1: 512. 2: 4096 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.39,DELL-RAC-MIB::virtualDiskAdapter1AccessPolicy,INTEGER,read-only,,mandatory,noAccess(1):fullAccess(2),Indicates the access policy of the virtual disk with the virtual adapters. Possible values: 1: No Access. 2: Full Access 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.40,DELL-RAC-MIB::virtualDiskAdapter2AccessPolicy,INTEGER,read-only,,mandatory,noAccess(1):fullAccess(2),Indicates the access policy of the virtual disk with the virtual adapters. Possible values: 1: No Access. 2: Full Access 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.41,DELL-RAC-MIB::virtualDiskAdapter3AccessPolicy,INTEGER,read-only,,mandatory,noAccess(1):fullAccess(2),Indicates the access policy of the virtual disk with the virtual adapters. Possible values: 1: No Access. 2: Full Access 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.42,DELL-RAC-MIB::virtualDiskAdapter4AccessPolicy,INTEGER,read-only,,mandatory,noAccess(1):fullAccess(2),Indicates the access policy of the virtual disk with the virtual adapters. Possible values: 1: No Access. 2: Full Access 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.43,DELL-RAC-MIB::virtualDiskCurrentActiveController,OCTET,read-only,,mandatory,,Indicates the Fully Qualified Device Descriptor (FQDD) of  the current active controller. 
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.44,DELL-RAC-MIB::virtualDiskFailoverController,OCTET,read-only,,mandatory,,Indicates the Fully Qualified Device Descriptor (FQDD) of  the failover controller. 
.1.3.6.1.4.1.674.10892.2.20,DELL-RAC-MIB::drsCMCAlertGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.20.10,DELL-RAC-MIB::drsChassisAlertVariables,,,,,,
.1.3.6.1.4.1.674.10892.2.20.10.1,DELL-RAC-MIB::drsCASubSystem,OCTET,read-only,,mandatory,,0020.0010.0001 This attribute defines the Sub-System Name of the CMC Alert
.1.3.6.1.4.1.674.10892.2.20.10.2,DELL-RAC-MIB::drsCASSCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0020.0010.0002 This attribute defines the Current Status of the Alerting  Sub-System
.1.3.6.1.4.1.674.10892.2.20.10.3,DELL-RAC-MIB::drsCASSPrevStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0020.0010.0003 This attribute defines the Previous Status of the Alerting  Sub-System
.1.3.6.1.4.1.674.10892.2.20.10.4,DELL-RAC-MIB::drsCASSChangeTime,TimeTicks,read-only,,mandatory,,0020.0010.0004 This attribute defines the Timestamp of Most Recent Change of  the Alerting Sub-System
.1.3.6.1.4.1.674.10892.2.20.10.5,DELL-RAC-MIB::drsCAMessage,OCTET,read-only,,mandatory,,0020.0010.0005 This attribute defines the CSSD message of the CMC Alert
.1.3.6.1.4.1.674.10892.2.21,DELL-RAC-MIB::drsCMCAlert2Group,,,,,,
.1.3.6.1.4.1.674.10892.2.21.0,DELL-RAC-MIB::drsCMCAlert2Group#,,,,,,
.1.3.6.1.4.1.674.10892.2.21.0.2153,DELL-RAC-MIB::alert2FanFailure,,,,,,Fan failure.
.1.3.6.1.4.1.674.10892.2.21.0.2154,DELL-RAC-MIB::alert2FanWarning,,,,,,Fan warning.
.1.3.6.1.4.1.674.10892.2.21.0.2155,DELL-RAC-MIB::alert2FanInformation,,,,,,Fan information.
.1.3.6.1.4.1.674.10892.2.21.0.2161,DELL-RAC-MIB::alert2TemperatureProbeFailure,,,,,,Temperature sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.2.21.0.2162,DELL-RAC-MIB::alert2TemperatureProbeWarning,,,,,,Temperature sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.2.21.0.2163,DELL-RAC-MIB::alert2TemperatureProbeNormal,,,,,,Temperature sensor value is within range.
.1.3.6.1.4.1.674.10892.2.21.0.2169,DELL-RAC-MIB::alert2VoltageProbeFailure,,,,,,Voltage sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.2.21.0.2170,DELL-RAC-MIB::alert2VoltageProbeWarning,,,,,,Voltage sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.2.21.0.2171,DELL-RAC-MIB::alert2VoltageProbeNormal,,,,,,Voltage sensor reading is within range.
.1.3.6.1.4.1.674.10892.2.21.0.2177,DELL-RAC-MIB::alert2AmperageProbeFailure,,,,,,Current sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.2.21.0.2178,DELL-RAC-MIB::alert2AmperageProbeWarning,,,,,,Current sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.2.21.0.2179,DELL-RAC-MIB::alert2AmperageProbeNormal,,,,,,Current sensor reading is within range.
.1.3.6.1.4.1.674.10892.2.21.0.2185,DELL-RAC-MIB::alert2PowerSupplyFailure,,,,,,Power supply has detected a failure.
.1.3.6.1.4.1.674.10892.2.21.0.2186,DELL-RAC-MIB::alert2PowerSupplyWarning,,,,,,Power supply has detected a warning.
.1.3.6.1.4.1.674.10892.2.21.0.2187,DELL-RAC-MIB::alert2PowerSupplyNormal,,,,,,Power supply has returned to normal.
.1.3.6.1.4.1.674.10892.2.21.0.2225,DELL-RAC-MIB::alert2BatteryFailure,,,,,,Battery has failed or battery is absent.
.1.3.6.1.4.1.674.10892.2.21.0.2226,DELL-RAC-MIB::alert2BatteryWarning,,,,,,Battery is low.
.1.3.6.1.4.1.674.10892.2.21.0.2227,DELL-RAC-MIB::alert2BatteryNormal,,,,,,Battery state has returned to normal; or battery presence had been detected.
.1.3.6.1.4.1.674.10892.2.21.0.2249,DELL-RAC-MIB::alert2LinkStatusFailure,,,,,,Link status failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.2250,DELL-RAC-MIB::alert2LinkStatusWarning,,,,,,Link status warning.
.1.3.6.1.4.1.674.10892.2.21.0.2251,DELL-RAC-MIB::alert2LinkStatusInformation,,,,,,Link status information.
.1.3.6.1.4.1.674.10892.2.21.0.2273,DELL-RAC-MIB::alert2PowerUsageFailure,,,,,,Power usage failure.
.1.3.6.1.4.1.674.10892.2.21.0.2274,DELL-RAC-MIB::alert2PowerUsageWarning,,,,,,Power usage warning.
.1.3.6.1.4.1.674.10892.2.21.0.2275,DELL-RAC-MIB::alert2PowerUsageInformation,,,,,,Power usage information.
.1.3.6.1.4.1.674.10892.2.21.0.2329,DELL-RAC-MIB::alert2HardwareConfigurationFailure,,,,,,Hardware configuration failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.2330,DELL-RAC-MIB::alert2HardwareConfigurationWarning,,,,,,Hardware configuration warning.
.1.3.6.1.4.1.674.10892.2.21.0.2331,DELL-RAC-MIB::alert2HardwareConfigurationInformation,,,,,,Hardware configuration information.
.1.3.6.1.4.1.674.10892.2.21.0.2337,DELL-RAC-MIB::alert2SoftwareConfigurationFailure,,,,,,Software configuration failure.
.1.3.6.1.4.1.674.10892.2.21.0.2338,DELL-RAC-MIB::alert2SoftwareConfigurationWarning,,,,,,Software configuration warning.
.1.3.6.1.4.1.674.10892.2.21.0.2339,DELL-RAC-MIB::alert2SoftwareConfigurationInformation,,,,,,Software configuration information.
.1.3.6.1.4.1.674.10892.2.21.0.2377,DELL-RAC-MIB::alert2SystemEventLogFailure,,,,,,System Event Log failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.2378,DELL-RAC-MIB::alert2SystemEventLogWarning,,,,,,System Event Log warning.
.1.3.6.1.4.1.674.10892.2.21.0.2379,DELL-RAC-MIB::alert2SystemEventLogInformation,,,,,,System Event Log information.
.1.3.6.1.4.1.674.10892.2.21.0.2385,DELL-RAC-MIB::alert2SecurityFailure,,,,,,Security failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.2386,DELL-RAC-MIB::alert2SecurityWarning,,,,,,Security warning.
.1.3.6.1.4.1.674.10892.2.21.0.2387,DELL-RAC-MIB::alert2SecurityInformation,,,,,,Security information.
.1.3.6.1.4.1.674.10892.2.21.0.2393,DELL-RAC-MIB::alert2CableFailure,,,,,,Cable failure.
.1.3.6.1.4.1.674.10892.2.21.0.2417,DELL-RAC-MIB::alert2PCIDeviceFailure,,,,,,PCI device failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.2418,DELL-RAC-MIB::alert2PCIDeviceWarning,,,,,,PCI device warning.
.1.3.6.1.4.1.674.10892.2.21.0.2419,DELL-RAC-MIB::alert2PCIDeviceInformation,,,,,,PCI device information.
.1.3.6.1.4.1.674.10892.2.21.0.2465,DELL-RAC-MIB::alert2PowerSupplyAbsent,,,,,,Power supply is absent.
.1.3.6.1.4.1.674.10892.2.21.0.2473,DELL-RAC-MIB::alert2RedundancyLost,,,,,,Redundancy is lost.
.1.3.6.1.4.1.674.10892.2.21.0.2474,DELL-RAC-MIB::alert2RedundancyDegraded,,,,,,Redundancy is degraded.
.1.3.6.1.4.1.674.10892.2.21.0.2475,DELL-RAC-MIB::alert2RedundancyInformation,,,,,,Redundancy information.
.1.3.6.1.4.1.674.10892.2.21.0.2545,DELL-RAC-MIB::alert2CMCFailure,,,,,,Chassis Management Controller detected an error.
.1.3.6.1.4.1.674.10892.2.21.0.2546,DELL-RAC-MIB::alert2CMCWarning,,,,,,Chassis Management Controller detected a warning.
.1.3.6.1.4.1.674.10892.2.21.0.2553,DELL-RAC-MIB::alert2IOVirtualizationFailure,,,,,,IO Virtualization failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.2554,DELL-RAC-MIB::alert2IOVirtualizationWarning,,,,,,IO Virtualization warning.
.1.3.6.1.4.1.674.10892.2.21.0.2555,DELL-RAC-MIB::alert2IOVirtualizationInformation,,,,,,IO Virtualization information.
.1.3.6.1.4.1.674.10892.2.21.0.4177,DELL-RAC-MIB::alert2StorageManagementFailure,,,,,,Storage Management has detected a device independent error condition. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.2.21.0.4178,DELL-RAC-MIB::alert2StorageManagementWarning,,,,,,Storage Management has detected a device independent warning condition. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.2.21.0.4179,DELL-RAC-MIB::alert2StorageManagementInformation,,,,,,Storage Management information. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.2.21.0.4201,DELL-RAC-MIB::alert2StorageFanFailure,,,,,,Storage Fan failure.
.1.3.6.1.4.1.674.10892.2.21.0.4202,DELL-RAC-MIB::alert2StorageFanWarning,,,,,,Storage Fan warning.
.1.3.6.1.4.1.674.10892.2.21.0.4203,DELL-RAC-MIB::alert2StorageFanInformation,,,,,,Storage Fan information.
.1.3.6.1.4.1.674.10892.2.21.0.4209,DELL-RAC-MIB::alert2StorageTemperatureProbeFailure,,,,,,Storage Temperature probe failure.
.1.3.6.1.4.1.674.10892.2.21.0.4210,DELL-RAC-MIB::alert2StorageTemperatureProbeWarning,,,,,,Storage Temperature probe warning.
.1.3.6.1.4.1.674.10892.2.21.0.4211,DELL-RAC-MIB::alert2StorageTemperatureProbeInformation,,,,,,Storage Temperature probe information.
.1.3.6.1.4.1.674.10892.2.21.0.4233,DELL-RAC-MIB::alert2StoragePowerSupplyFailure,,,,,,Storage Power supply failure.
.1.3.6.1.4.1.674.10892.2.21.0.4234,DELL-RAC-MIB::alert2StoragePowerSupplyWarning,,,,,,Storage Power supply warning.
.1.3.6.1.4.1.674.10892.2.21.0.4235,DELL-RAC-MIB::alert2StoragePowerSupplyInformation,,,,,,Storage Power supply information.
.1.3.6.1.4.1.674.10892.2.21.0.4273,DELL-RAC-MIB::alert2StorageBatteryFailure,,,,,,Storage Battery failure.
.1.3.6.1.4.1.674.10892.2.21.0.4274,DELL-RAC-MIB::alert2StorageBatteryWarning,,,,,,Storage Battery warning.
.1.3.6.1.4.1.674.10892.2.21.0.4275,DELL-RAC-MIB::alert2StorageBatteryInformation,,,,,,Storage Battery information.
.1.3.6.1.4.1.674.10892.2.21.0.4329,DELL-RAC-MIB::alert2StorageControllerFailure,,,,,,Storage Controller failure.
.1.3.6.1.4.1.674.10892.2.21.0.4330,DELL-RAC-MIB::alert2StorageControllerWarning,,,,,,Storage Controller warning.
.1.3.6.1.4.1.674.10892.2.21.0.4331,DELL-RAC-MIB::alert2StorageControllerInformation,,,,,,Storage Controller information.
.1.3.6.1.4.1.674.10892.2.21.0.4337,DELL-RAC-MIB::alert2StorageEnclosureFailure,,,,,,Storage Enclosure failure.
.1.3.6.1.4.1.674.10892.2.21.0.4338,DELL-RAC-MIB::alert2StorageEnclosureWarning,,,,,,Storage Enclosure warning.
.1.3.6.1.4.1.674.10892.2.21.0.4339,DELL-RAC-MIB::alert2StorageEnclosureInformation,,,,,,Storage Enclosure information.
.1.3.6.1.4.1.674.10892.2.21.0.4345,DELL-RAC-MIB::alert2StoragePhysicalDiskFailure,,,,,,Storage Physical disk failure.
.1.3.6.1.4.1.674.10892.2.21.0.4346,DELL-RAC-MIB::alert2StoragePhysicalDiskWarning,,,,,,Storage Physical disk warning.
.1.3.6.1.4.1.674.10892.2.21.0.4347,DELL-RAC-MIB::alert2StoragePhysicalDiskInformation,,,,,,Storage Physical disk information.
.1.3.6.1.4.1.674.10892.2.21.0.4353,DELL-RAC-MIB::alert2StorageVirtualDiskFailure,,,,,,Storage Virtual disk failure.
.1.3.6.1.4.1.674.10892.2.21.0.4354,DELL-RAC-MIB::alert2StorageVirtualDiskWarning,,,,,,Storage Virtual disk warning.
.1.3.6.1.4.1.674.10892.2.21.0.4355,DELL-RAC-MIB::alert2StorageVirtualDiskInformation,,,,,,Storage Virtual disk information.
.1.3.6.1.4.1.674.10892.2.21.0.4433,DELL-RAC-MIB::alert2StorageSecurityFailure,,,,,,Storage Security failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.4434,DELL-RAC-MIB::alert2StorageSecurityWarning,,,,,,Storage Security warning.
.1.3.6.1.4.1.674.10892.2.21.0.4435,DELL-RAC-MIB::alert2StorageSecurityInformation,,,,,,Storage Security information.
.1.3.6.1.4.1.674.10892.2.21.0.6314,DELL-RAC-MIB::alert2SoftwareChangeUpdateWarning,,,,,,Software change update warning.
.1.3.6.1.4.1.674.10892.2.21.0.8305,DELL-RAC-MIB::alert2IOMTemperatureExceeded,,,,,,I/O Module <iom slot name> temperature exceeded operating range.
.1.3.6.1.4.1.674.10892.2.21.0.8306,DELL-RAC-MIB::alert2Unable2ReadTemperatureSensors,,,,,,Unable to read planar board temperature sensors. The cooling has been increased to safeguard the system.
.1.3.6.1.4.1.674.10892.2.21.0.8329,DELL-RAC-MIB::alert2PowerSupplyAuditFailure,,,,,,Power Supply audit failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.8330,DELL-RAC-MIB::alert2PowerSupplyAuditWarning,,,,,,Power Supply audit warning.
.1.3.6.1.4.1.674.10892.2.21.0.8331,DELL-RAC-MIB::alert2PowerSupplyRedundancyPolicyChanged,,,,,,PSU redundancy policy changed.
.1.3.6.1.4.1.674.10892.2.21.0.8361,DELL-RAC-MIB::alert2SoftwareChangeAuditFailure,,,,,,Software change audit failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.8417,DELL-RAC-MIB::alert2PowerUsageAuditFailure,,,,,,Power usage audit failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.8418,DELL-RAC-MIB::alert2PowerUsageAuditWarning,,,,,,Power usage audit warning.
.1.3.6.1.4.1.674.10892.2.21.0.8419,DELL-RAC-MIB::alert2PowerUsageAuditInformation,,,,,,Power usage audit information.
.1.3.6.1.4.1.674.10892.2.21.0.8513,DELL-RAC-MIB::alert2LicenseFailure,,,,,,License failure.
.1.3.6.1.4.1.674.10892.2.21.0.8514,DELL-RAC-MIB::alert2LicenseWarning,,,,,,License warning.
.1.3.6.1.4.1.674.10892.2.21.0.8515,DELL-RAC-MIB::alert2LicenseInformation,,,,,,License information.
.1.3.6.1.4.1.674.10892.2.21.0.8562,DELL-RAC-MIB::alert2PCIDeviceAuditWarning,,,,,,PCI device audit warning.
.1.3.6.1.4.1.674.10892.2.21.0.8689,DELL-RAC-MIB::alert2CMCAuditFailure,,,,,,Chassis Management Controller audit failure or critical event.
.1.3.6.1.4.1.674.10892.2.21.0.8690,DELL-RAC-MIB::alert2CMCAuditWarning,,,,,,Chassis Management Controller audit warning.
.1.3.6.1.4.1.674.10892.2.21.0.8691,DELL-RAC-MIB::alert2CMCAuditInformation,,,,,,Chassis Management Controller audit information.
.1.3.6.1.4.1.674.10892.2.21.0.8698,DELL-RAC-MIB::alert2IOVirtualizationAuditWarning,,,,,,IO Virtualization audit warning.
.1.3.6.1.4.1.674.10892.2.21.0.10395,DELL-RAC-MIB::alert2CMCTestTrap,,,,,,Test trap generated by CMC in response to a user request.
.1.3.6.1.4.1.674.10892.2.21.0.10529,DELL-RAC-MIB::alert2SWCConfigurationFailure,,,,,,Software configuration failure.
.1.3.6.1.4.1.674.10892.2.21.0.10530,DELL-RAC-MIB::alert2SWCConfigurationWarning,,,,,,Software configuration warning.
.1.3.6.1.4.1.674.10892.2.21.0.10611,DELL-RAC-MIB::alert2PCIDeviceConfigurationInformation,,,,,,PCI device configuration information.
.1.3.6.1.4.1.674.10892.2.21.0.10746,DELL-RAC-MIB::alert2IOVConfigurationWarning,,,,,,IO Virtualization configuration warning.
.1.3.6.1.4.1.674.10892.2.21.0.10747,DELL-RAC-MIB::alert2IOVConfigurationInformation,,,,,,IO Virtualization configuration information.
.1.3.6.1.4.1.674.10892.2.21.10,DELL-RAC-MIB::drsChassisAlert2Variables,,,,,,
.1.3.6.1.4.1.674.10892.2.21.10.1,DELL-RAC-MIB::drsCA2MessageID,OCTET,read-only,,mandatory,,Message ID of the alert.
.1.3.6.1.4.1.674.10892.2.21.10.2,DELL-RAC-MIB::drsCA2Message,OCTET,read-only,,mandatory,,Message describing the alert.
.1.3.6.1.4.1.674.10892.2.21.10.3,DELL-RAC-MIB::drsCA2MessageArgs,OCTET,read-only,,mandatory,,Concatenated set of strings representing any message arguments that were used to construct the alert message. Each message argument string is enclosed in double quotes, and there is a comma after the ending double quote of each message argument string, except the last one. Any double quotes found within a message argument string were preprocessed and changed to single quotes.
.1.3.6.1.4.1.674.10892.2.21.10.4,DELL-RAC-MIB::drsCA2AlertStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Status of the alert.
.1.3.6.1.4.1.674.10892.2.21.10.5,DELL-RAC-MIB::drsCA2FQDD,OCTET,read-only,,mandatory,,Fully qualified device descriptor of device causing the alert.
.1.3.6.1.4.1.674.10892.2.5000,DELL-RAC-MIB::drsAlertGroup,,,,,,
.1.3.6.1.4.1.674.10892.2.5000.10,DELL-RAC-MIB::drsAlertVariables,,,,,,
.1.3.6.1.4.1.674.10892.2.5000.10.1,DELL-RAC-MIB::drsAlertSystem,OCTET,read-only,,mandatory,,5000.0010.0001 Name of the system generating the alert.
.1.3.6.1.4.1.674.10892.2.5000.10.2,DELL-RAC-MIB::drsAlertTableIndexOID,OBJECT,read-only,,mandatory,,5000.0010.0002 0.0
.1.3.6.1.4.1.674.10892.2.5000.10.3,DELL-RAC-MIB::drsAlertMessage,OCTET,read-only,,mandatory,,5000.0010.0003 Message describing the alert.
.1.3.6.1.4.1.674.10892.2.5000.10.4,DELL-RAC-MIB::drsAlertCurrentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),5000.0010.0004 Current status of object causing the alert.
.1.3.6.1.4.1.674.10892.2.5000.10.5,DELL-RAC-MIB::drsAlertPreviousStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),5000.0010.0005 Previous status of object causing the alert.
.1.3.6.1.4.1.674.10892.2.5000.10.6,DELL-RAC-MIB::drsAlertData,OCTET,read-only,,mandatory,,5000.0010.0006 Alert data.
.1.3.6.1.4.1.674.10892.5,IDRAC-MIB::outOfBandGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.1,IDRAC-MIB::informationGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.1.1,IDRAC-MIB::racInfoGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.1.1.1,IDRAC-MIB::racName,OCTET,read-only,,mandatory,,This attribute defines the product name of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.1.2,IDRAC-MIB::racShortName,OCTET,read-only,,mandatory,,This attribute defines the short product name of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.1.3,IDRAC-MIB::racDescription,OCTET,read-only,,mandatory,,This attribute defines the product description of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.1.4,IDRAC-MIB::racManufacturer,OCTET,read-only,,mandatory,,This attribute defines the product manufacturer of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.1.5,IDRAC-MIB::racVersion,OCTET,read-only,,mandatory,,This attribute defines the product version of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.1.6,IDRAC-MIB::racURL,OCTET,read-only,,mandatory,,This attribute defines the out-of-band UI URL of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.1.7,IDRAC-MIB::racType,INTEGER,read-only,,mandatory,other(1):unknown(2):idrac7monolithic(16):idrac7modular(17):idrac7DCS(21):idrac8monolithic(32):idrac8modular(33):idrac8DCS(34):idrac9Monolithic(48):idrac9Modular(49):idrac9DCS(50):idrac915GMonolithic(64):idrac915GModular(65):idrac915GDCS(66),This attribute defines the type of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.1.8,IDRAC-MIB::racFirmwareVersion,OCTET,read-only,,mandatory,,This attribute defines the firmware version of a remote access card.
.1.3.6.1.4.1.674.10892.5.1.2,IDRAC-MIB::chassisInfoGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.1.2.1,IDRAC-MIB::chassisServiceTag,OCTET,read-only,,mandatory,,This attribute defines the service tag of the modular chassis. The value is zero length if not a modular system.
.1.3.6.1.4.1.674.10892.5.1.2.2,IDRAC-MIB::chassisNameModular,OCTET,read-only,,mandatory,,This attribute defines the chassis name of the modular chassis. The value is zero length if not a modular system.
.1.3.6.1.4.1.674.10892.5.1.2.3,IDRAC-MIB::chassisModelModular,OCTET,read-only,,mandatory,,This attribute defines the model of the modular chassis. The value is zero length if not a modular system.
.1.3.6.1.4.1.674.10892.5.1.3,IDRAC-MIB::systemInfoGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.1.3.1,IDRAC-MIB::systemFQDN,OCTET,read-only,,mandatory,,This attribute defines the fully qualified domain name of the system. For example, hostname.domainname.
.1.3.6.1.4.1.674.10892.5.1.3.2,IDRAC-MIB::systemServiceTag,OCTET,read-only,,mandatory,,This attribute defines the service tag of the system.
.1.3.6.1.4.1.674.10892.5.1.3.3,IDRAC-MIB::systemExpressServiceCode,OCTET,read-only,,mandatory,,This attribute defines the express service code of the system.
.1.3.6.1.4.1.674.10892.5.1.3.4,IDRAC-MIB::systemAssetTag,OCTET,read-only,,mandatory,,This attribute defines the asset tag of the system.
.1.3.6.1.4.1.674.10892.5.1.3.5,IDRAC-MIB::systemBladeSlotNumber,OCTET,read-only,,mandatory,,This attribute defines the slot number of the system in the modular chassis.
.1.3.6.1.4.1.674.10892.5.1.3.6,IDRAC-MIB::systemOSName,OCTET,read-only,,mandatory,,This attribute defines the name of the operating system that the host is running.
.1.3.6.1.4.1.674.10892.5.1.3.7,IDRAC-MIB::systemFormFactor,INTEGER,read-only,,mandatory,other(1):unknown(2):u1(3):u2(4):u4(5):u7(6):singleWidthHalfHeight(7):dualWidthHalfHeight(8):singleWidthFullHeight(9):dualWidthFullHeight(10):singleWidthQuarterHeight(11):u5(12):u1HalfWidth(13):u1QuarterWidth(14):u1FullWidth(15),This attribute defines the form factor of the system.
.1.3.6.1.4.1.674.10892.5.1.3.8,IDRAC-MIB::systemDataCenterName,OCTET,read-only,,mandatory,,This attribute defines the Data Center locator of the system.
.1.3.6.1.4.1.674.10892.5.1.3.9,IDRAC-MIB::systemAisleName,OCTET,read-only,,mandatory,,This attribute defines the Aisle locator of the system.
.1.3.6.1.4.1.674.10892.5.1.3.10,IDRAC-MIB::systemRackName,OCTET,read-only,,mandatory,,This attribute defines the Rack locator of the system.
.1.3.6.1.4.1.674.10892.5.1.3.11,IDRAC-MIB::systemRackSlot,OCTET,read-only,,mandatory,,This attribute defines the Rack Slot locator of the system.
.1.3.6.1.4.1.674.10892.5.1.3.12,IDRAC-MIB::systemModelName,OCTET,read-only,,mandatory,,This attribute defines the model name of the system.
.1.3.6.1.4.1.674.10892.5.1.3.13,IDRAC-MIB::systemSystemID,INTEGER,read-only,,mandatory,,This attribute defines the system ID of the system.
.1.3.6.1.4.1.674.10892.5.1.3.14,IDRAC-MIB::systemOSVersion,OCTET,read-only,,mandatory,,This attribute defines the version of the operating system that the host is running.
.1.3.6.1.4.1.674.10892.5.1.3.15,IDRAC-MIB::systemRoomName,OCTET,read-only,,mandatory,,This attribute defines the Room locator of the system.
.1.3.6.1.4.1.674.10892.5.1.3.16,IDRAC-MIB::systemChassisSystemHeight,INTEGER,read-only,,mandatory,,This attribute defines the height of the system, in 'U's. A U is a standard unit of measure for the height of a rack or rack-mountable component. (If not applicable, a 'no such name' error is returned.)
.1.3.6.1.4.1.674.10892.5.1.3.17,IDRAC-MIB::systemBladeGeometry,INTEGER,read-only,,mandatory,other(1):unknown(2):singleWidthHalfHeight(3):dualWidthHalfHeight(4):singleWidthFullHeight(5):dualWidthFullHeight(6):singleWidthQuarterHeight(7):u1HalfWidth(8):u1QuarterWidth(9):u1FullWidth(10),This attribute defines the geometry for a modular system. (If not applicable, a 'no such name' error is returned.)
.1.3.6.1.4.1.674.10892.5.1.3.18,IDRAC-MIB::systemNodeID,OCTET,read-only,,mandatory,,This attribute defines the node ID of the system. The node ID provides a unique identifier for the system.
.1.3.6.1.4.1.674.10892.5.1.3.19,IDRAC-MIB::systemOEMOSVersion,OCTET,read-only,,mandatory,,This attribute defines the OEM version of the operating system .
.1.3.6.1.4.1.674.10892.5.1.3.20,IDRAC-MIB::systemLockdownMode,INTEGER,read-only,,mandatory,enabled(1):unknown(2),This attribute defines the system Lockdown mode is enabled or disabled.
.1.3.6.1.4.1.674.10892.5.2,IDRAC-MIB::statusGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.2.1,IDRAC-MIB::globalSystemStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the overall rollup status of all components in the system being monitored by the remote access card. Includes system, storage, IO devices, iDRAC, CPU, memory, etc.
.1.3.6.1.4.1.674.10892.5.2.2,IDRAC-MIB::systemLCDStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the system status as it is reflected by the LCD front panel. Not all system components may be included.
.1.3.6.1.4.1.674.10892.5.2.3,IDRAC-MIB::globalStorageStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the overall storage status being monitored by the remote access card.
.1.3.6.1.4.1.674.10892.5.2.4,IDRAC-MIB::systemPowerState,INTEGER,read-only,,mandatory,other(1):unknown(2):off(3):on(4),This attribute defines the power state of the system.
.1.3.6.1.4.1.674.10892.5.2.5,IDRAC-MIB::systemPowerUpTime,INTEGER,read-only,,mandatory,,This attribute defines the power-up time of the system in seconds.
.1.3.6.1.4.1.674.10892.5.3,IDRAC-MIB::alertGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.1,IDRAC-MIB::alertVariablesGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.1.1,IDRAC-MIB::alertMessageID,OCTET,read-only,,mandatory,,Message ID of the event.
.1.3.6.1.4.1.674.10892.5.3.1.2,IDRAC-MIB::alertMessage,OCTET,read-only,,mandatory,,Message describing the alert.
.1.3.6.1.4.1.674.10892.5.3.1.3,IDRAC-MIB::alertCurrentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Current status of object causing the alert, if applicable.
.1.3.6.1.4.1.674.10892.5.3.1.4,IDRAC-MIB::alertSystemServiceTag,OCTET,read-only,,mandatory,,Service tag of the system.
.1.3.6.1.4.1.674.10892.5.3.1.5,IDRAC-MIB::alertSystemFQDN,OCTET,read-only,,mandatory,,Fully qualified domain name of the system.
.1.3.6.1.4.1.674.10892.5.3.1.6,IDRAC-MIB::alertFQDD,OCTET,read-only,,mandatory,,Fully qualified device descriptor of the device.
.1.3.6.1.4.1.674.10892.5.3.1.7,IDRAC-MIB::alertDeviceDisplayName,OCTET,read-only,,mandatory,,Display name of the device/FQDD.
.1.3.6.1.4.1.674.10892.5.3.1.8,IDRAC-MIB::alertMessageArguments,OCTET,read-only,,mandatory,,Concatenated set of strings representing the message arguments of the event. Each message argument string is enclosed in double quotes, and there is a comma after the ending double quote of each message argument string, except the last one. Any double quotes found within a message argument string are preprocessed and changed to single quotes.
.1.3.6.1.4.1.674.10892.5.3.1.9,IDRAC-MIB::alertChassisServiceTag,OCTET,read-only,,mandatory,,For modular systems, the service tag of the enclosing chassis. For rack and tower systems, this varbind will be empty (zero length).
.1.3.6.1.4.1.674.10892.5.3.1.10,IDRAC-MIB::alertChassisName,OCTET,read-only,,mandatory,,For modular systems, the chassis name of the enclosing chassis. For rack and tower systems, this varbind will be empty (zero length).
.1.3.6.1.4.1.674.10892.5.3.1.11,IDRAC-MIB::alertRacFQDN,OCTET,read-only,,mandatory,,Fully qualified domain name of the remote access card.
.1.3.6.1.4.1.674.10892.5.3.2,IDRAC-MIB::alertTrapGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.1,IDRAC-MIB::systemAlertTrapGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.1.0,IDRAC-MIB::systemAlertTrapGroup#,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2089,IDRAC-MIB::alertNetworkFailure,,,,,,Network failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2090,IDRAC-MIB::alertNetworkWarning,,,,,,Network warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2091,IDRAC-MIB::alertNetworkInformation,,,,,,Network information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2153,IDRAC-MIB::alertFanFailure,,,,,,Fan failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2154,IDRAC-MIB::alertFanWarning,,,,,,Fan warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2155,IDRAC-MIB::alertFanInformation,,,,,,Fan information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2161,IDRAC-MIB::alertTemperatureProbeFailure,,,,,,Temperature sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2162,IDRAC-MIB::alertTemperatureProbeWarning,,,,,,Temperature sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2163,IDRAC-MIB::alertTemperatureProbeNormal,,,,,,Temperature sensor value is within range.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2169,IDRAC-MIB::alertVoltageProbeFailure,,,,,,Voltage sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2170,IDRAC-MIB::alertVoltageProbeWarning,,,,,,Voltage sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2171,IDRAC-MIB::alertVoltageProbeNormal,,,,,,Voltage sensor reading is within range.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2177,IDRAC-MIB::alertAmperageProbeFailure,,,,,,Current sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2178,IDRAC-MIB::alertAmperageProbeWarning,,,,,,Current sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2179,IDRAC-MIB::alertAmperageProbeNormal,,,,,,Current sensor reading is within range.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2185,IDRAC-MIB::alertPowerSupplyFailure,,,,,,Power supply has detected a failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2186,IDRAC-MIB::alertPowerSupplyWarning,,,,,,Power supply has detected a warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2187,IDRAC-MIB::alertPowerSupplyNormal,,,,,,Power supply has returned to normal.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2209,IDRAC-MIB::alertIntegratedDualSDModuleFailure,,,,,,Integrated Dual SD Module failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2210,IDRAC-MIB::alertIntegratedDualSDModuleWarning,,,,,,Integrated Dual SD Module warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2211,IDRAC-MIB::alertIntegratedDualSDModuleInformation,,,,,,Integrated Dual SD Module information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2225,IDRAC-MIB::alertBatteryFailure,,,,,,Battery has failed or battery is absent.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2226,IDRAC-MIB::alertBatteryWarning,,,,,,Battery is low.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2227,IDRAC-MIB::alertBatteryNormal,,,,,,Battery state has returned to normal; or battery presence had been detected.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2233,IDRAC-MIB::alertAutomaticSystemRecovery,,,,,,Automatic system recovery (ASR) was performed.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2241,IDRAC-MIB::alertProcessorDeviceStatusFailure,,,,,,Processor device status has detected a failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2242,IDRAC-MIB::alertProcessorDeviceStatusWarning,,,,,,Processor device status has detected a warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2243,IDRAC-MIB::alertProcessorDeviceStatusNormal,,,,,,Processor device status has returned to normal.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2249,IDRAC-MIB::alertLinkStatusFailure,,,,,,Link status failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2250,IDRAC-MIB::alertLinkStatusWarning,,,,,,Link status warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2251,IDRAC-MIB::alertLinkStatusInformation,,,,,,Link status information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2265,IDRAC-MIB::alertMemoryDeviceFailure,,,,,,Memory device status is critical.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2266,IDRAC-MIB::alertMemoryDeviceWarning,,,,,,Memory device status is noncritical.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2267,IDRAC-MIB::alertMemoryDeviceInformation,,,,,,Memory device informational event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2273,IDRAC-MIB::alertPowerUsageFailure,,,,,,The system halted because system power exceeds capacity; or the system performance degraded because power draw exceeds the power threshold.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2274,IDRAC-MIB::alertPowerUsageWarning,,,,,,System performance degraded.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2275,IDRAC-MIB::alertPowerUsageInformation,,,,,,System performance restored.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2297,IDRAC-MIB::alertPhysicalDiskFailure,,,,,,Physical disk failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2298,IDRAC-MIB::alertPhysicalDiskWarning,,,,,,Physical disk warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2299,IDRAC-MIB::alertPhysicalDiskInformation,,,,,,Physical disk information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2329,IDRAC-MIB::alertHardwareConfigurationFailure,,,,,,Hardware configuration failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2330,IDRAC-MIB::alertHardwareConfigurationWarning,,,,,,Hardware configuration warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2331,IDRAC-MIB::alertHardwareConfigurationInformation,,,,,,Hardware configuration information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2337,IDRAC-MIB::alertSoftwareConfigurationFailure,,,,,,Software configuration failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2338,IDRAC-MIB::alertSoftwareConfigurationWarning,,,,,,Software configuration warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2339,IDRAC-MIB::alertSoftwareConfigurationInformation,,,,,,Software configuration information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2377,IDRAC-MIB::alertSystemEventLogFailure,,,,,,System Event Log failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2378,IDRAC-MIB::alertSystemEventLogWarning,,,,,,System Event Log warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2379,IDRAC-MIB::alertSystemEventLogInformation,,,,,,System Event Log information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2385,IDRAC-MIB::alertSecurityFailure,,,,,,Security failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2386,IDRAC-MIB::alertSecurityWarning,,,,,,Security warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2387,IDRAC-MIB::alertSecurityInformation,,,,,,Security information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2393,IDRAC-MIB::alertCableFailure,,,,,,Cable failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2409,IDRAC-MIB::alertOSFailure,,,,,,A critical stop occurred during OS load; or a runtime critical stop occurred.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2411,IDRAC-MIB::alertOSInformation,,,,,,An OS graceful stop occurred; or an OS graceful shut-down occurred.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2417,IDRAC-MIB::alertPCIDeviceFailure,,,,,,An error was detected for a PCI device.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2418,IDRAC-MIB::alertPCIDeviceWarning,,,,,,A warning event was detected for a PCI device.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2419,IDRAC-MIB::alertPCIDeviceInformation,,,,,,An informational event was detected for a PCI device.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2425,IDRAC-MIB::alertBiosPostFailure,,,,,,System BIOS detected a failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2433,IDRAC-MIB::alertInternaliDRACMemoryUnresponsive,,,,,,Unable to communicate with internal iDRAC memory
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2435,IDRAC-MIB::alertServerIdleTime,,,,,,Server is either idle or underutilized
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2457,IDRAC-MIB::alertProcessorDeviceAbsent,,,,,,Processor device is absent.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2465,IDRAC-MIB::alertPowerSupplyAbsent,,,,,,Power supply is absent.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2473,IDRAC-MIB::alertRedundancyLost,,,,,,Redundancy is lost.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2474,IDRAC-MIB::alertRedundancyDegraded,,,,,,Redundancy is degraded.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2475,IDRAC-MIB::alertRedundancyInformation,,,,,,Redundancy information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2481,IDRAC-MIB::alertIntegratedDualSDModuleAbsent,,,,,,Integrated Dual SD Module is absent.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2489,IDRAC-MIB::alertIntegratedDualSDModuleRedundancyLost,,,,,,Integrated Dual SD Module redundancy is lost.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2490,IDRAC-MIB::alertIntegratedDualSDModuleRedundancyDegraded,,,,,,Integrated Dual SD Module redundancy is degraded.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2491,IDRAC-MIB::alertIntegratedDualSDModuleRedundancyInformation,,,,,,Integrated Dual SD Module redundancy information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2505,IDRAC-MIB::alertvFlashMediaDeviceFailure,,,,,,vFlash Media device failure.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2506,IDRAC-MIB::alertvFlashMediaDeviceWarning,,,,,,vFlash Media device warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2507,IDRAC-MIB::alertvFlashMediaDeviceInformation,,,,,,vFlash Media device information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2515,IDRAC-MIB::alertvFlashMediaDeviceAbsent,,,,,,vFlash Media device is absent.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2521,IDRAC-MIB::alertTemperatureStatisticsFailure,,,,,,Temperature has been above the warning or critical threshold level for a long enough period of time to be considered in a critical state.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2522,IDRAC-MIB::alertTemperatureStatisticsWarning,,,,,,Temperature has been above the warning or critical threshold level for a long enough period of time to be considered in a warning state.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2531,IDRAC-MIB::alertRACInformation,,,,,,RAC information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2537,IDRAC-MIB::alertFiberChannelFailure,,,,,,Fiber Channel failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2538,IDRAC-MIB::alertFiberChannelWarning,,,,,,Fiber Channel warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2539,IDRAC-MIB::alertFiberChannelInformation,,,,,,Fiber Channel information.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2545,IDRAC-MIB::alertCMCFailure,,,,,,Chassis Management Controller detected an error.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2546,IDRAC-MIB::alertCMCWarning,,,,,,Chassis Management Controller detected a warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2553,IDRAC-MIB::alertIOVirtualizationFailure,,,,,,IO Virtualization failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.2650,IDRAC-MIB::alertSystemPerformanceWarning,,,,,,System Performance warning.
.1.3.6.1.4.1.674.10892.5.3.2.1.0.3049,IDRAC-MIB::alertLiquidCoolingLeakFailure,,,,,,A large leak is detected on the device
.1.3.6.1.4.1.674.10892.5.3.2.1.0.3050,IDRAC-MIB::alertLiquidCoolingLeakWarning,,,,,,A small leak is detected on the device
.1.3.6.1.4.1.674.10892.5.3.2.1.0.3051,IDRAC-MIB::alertLiquidCoolingLeakInformational,,,,,,A small leak that was earlier detected on the device is now resolved.
.1.3.6.1.4.1.674.10892.5.3.2.2,IDRAC-MIB::storageAlertTrapGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.2.0,IDRAC-MIB::storageAlertTrapGroup#,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4177,IDRAC-MIB::alertStorageManagementFailure,,,,,,Storage Management has detected a device independent error condition. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4178,IDRAC-MIB::alertStorageManagementWarning,,,,,,Storage Management has detected a device independent warning condition. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4179,IDRAC-MIB::alertStorageManagementInformation,,,,,,Storage Management Information. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4201,IDRAC-MIB::alertStorageFanFailure,,,,,,Fan failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4202,IDRAC-MIB::alertStorageFanWarning,,,,,,Fan warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4203,IDRAC-MIB::alertStorageFanInformation,,,,,,Fan information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4209,IDRAC-MIB::alertStorageTemperatureProbeFailure,,,,,,Temperature probe failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4210,IDRAC-MIB::alertStorageTemperatureProbeWarning,,,,,,Temperature probe warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4211,IDRAC-MIB::alertStorageTemperatureProbeInformation,,,,,,Temperature probe information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4233,IDRAC-MIB::alertStoragePowerSupplyFailure,,,,,,Power supply failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4234,IDRAC-MIB::alertStoragePowerSupplyWarning,,,,,,Power supply warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4235,IDRAC-MIB::alertStoragePowerSupplyInformation,,,,,,Power supply information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4273,IDRAC-MIB::alertStorageBatteryFailure,,,,,,Battery failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4274,IDRAC-MIB::alertStorageBatteryWarning,,,,,,Battery warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4275,IDRAC-MIB::alertStorageBatteryInformation,,,,,,Battery information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4329,IDRAC-MIB::alertStorageControllerFailure,,,,,,Controller failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4330,IDRAC-MIB::alertStorageControllerWarning,,,,,,Controller warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4331,IDRAC-MIB::alertStorageControllerInformation,,,,,,Controller information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4337,IDRAC-MIB::alertStorageEnclosureFailure,,,,,,Enclosure failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4338,IDRAC-MIB::alertStorageEnclosureWarning,,,,,,Enclosure warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4339,IDRAC-MIB::alertStorageEnclosureInformation,,,,,,Enclosure information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4345,IDRAC-MIB::alertStoragePhysicalDiskFailure,,,,,,Physical disk failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4346,IDRAC-MIB::alertStoragePhysicalDiskWarning,,,,,,Physical disk warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4347,IDRAC-MIB::alertStoragePhysicalDiskInformation,,,,,,Physical disk information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4353,IDRAC-MIB::alertStorageVirtualDiskFailure,,,,,,Virtual disk failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4354,IDRAC-MIB::alertStorageVirtualDiskWarning,,,,,,Virtual disk warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4355,IDRAC-MIB::alertStorageVirtualDiskInformation,,,,,,Virtual disk information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4370,IDRAC-MIB::alertStorageSolidstateDrive,,,,,,SSD is less than the threshold value.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4433,IDRAC-MIB::alertStorageSecurityFailure,,,,,,Storage Security failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4434,IDRAC-MIB::alertStorageSecurityWarning,,,,,,Storage Security warning.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4435,IDRAC-MIB::alertStorageSecurityInformation,,,,,,Storage Security information.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4761,IDRAC-MIB::alertStorageSoftwareDefinedSubSystemFailure,,,,,,Software defined storage subsystem failure.
.1.3.6.1.4.1.674.10892.5.3.2.2.0.4762,IDRAC-MIB::alertStorageSoftwareDefinedSubSystemWarning,,,,,,Software defined storage subsystem warning.
.1.3.6.1.4.1.674.10892.5.3.2.3,IDRAC-MIB::updatesAlertTrapGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.3.0,IDRAC-MIB::updatesAlertTrapGroup#,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.3.0.6211,IDRAC-MIB::alertUpdateJobInformation,,,,,,Update job information
.1.3.6.1.4.1.674.10892.5.3.2.3.0.6314,IDRAC-MIB::alertSoftwareChangeUpdateWarning,,,,,,Software change update warning.
.1.3.6.1.4.1.674.10892.5.3.2.4,IDRAC-MIB::auditAlertTrapGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.4.0,IDRAC-MIB::auditAlertTrapGroup#,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8305,IDRAC-MIB::alertTemperatureProbeChangeFailure,,,,,,Temperature increase Error.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8306,IDRAC-MIB::alertTemperatureProbeReadWarning,,,,,,Unable to read Temperature Sensors
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8329,IDRAC-MIB::alertPowerSupplyAuditFailure,,,,,,Power Supply audit failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8330,IDRAC-MIB::alertPowerSupplyAuditWarning,,,,,,Power Supply audit warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8417,IDRAC-MIB::alertPowerUsageAuditFailure,,,,,,Power usage audit failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8418,IDRAC-MIB::alertPowerUsageAuditWarning,,,,,,Power usage audit warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8419,IDRAC-MIB::alertPowerUsageAuditInformation,,,,,,Power usage audit information.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8474,IDRAC-MIB::alertHWCAuditWarning,,,,,,Hardware configuration warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8475,IDRAC-MIB::alertHWCAuditInformation,,,,,,Hardware configuration audit information.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8490,IDRAC-MIB::alertUserTrackingWarning,,,,,,User Tracking warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8499,IDRAC-MIB::alertiDRACIPAddressChange,,,,,,iDRAC IP address has changed.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8513,IDRAC-MIB::alertLicenseFailure,,,,,,License failure.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8514,IDRAC-MIB::alertLicenseWarning,,,,,,License warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8515,IDRAC-MIB::alertLicenseInformation,,,,,,License information.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8562,IDRAC-MIB::alertPCIDeviceAuditWarning,,,,,,PCI device audit warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8579,IDRAC-MIB::alertSystemPowerStateChangeInformation,,,,,,Host is going through a power state change (powering on or powering off).
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8594,IDRAC-MIB::alertDebugWarning,,,,,,Debug authorization failed.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8595,IDRAC-MIB::alertDebugInformation,,,,,,Debug authorized.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8674,IDRAC-MIB::alertRacConfigurationChangewarning,,,,,,Configuration or state Change warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8675,IDRAC-MIB::alertRacConfigurationChangeInformation,,,,,,Configuration or state Change Information.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8689,IDRAC-MIB::alertCMCAuditFailure,,,,,,Chassis Management Controller audit failure or critical event.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8690,IDRAC-MIB::alertCMCAuditWarning,,,,,,Chassis Management Controller audit warning.
.1.3.6.1.4.1.674.10892.5.3.2.4.0.8691,IDRAC-MIB::alertCMCAuditInformation,,,,,,Chassis Management Controller audit information.
.1.3.6.1.4.1.674.10892.5.3.2.5,IDRAC-MIB::configurationAlertTrapGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.5.0,IDRAC-MIB::configurationAlertTrapGroup#,,,,,,
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10267,IDRAC-MIB::alertJobControlConfigurationInformation,,,,,,Job Control configuration information.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10298,IDRAC-MIB::alertPRDeviceDetectionWarning,,,,,,The indicated device is not detected.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10395,IDRAC-MIB::alertTestTrapEvent,,,,,,The iDRAC generated a test trap event in response to a user request.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10529,IDRAC-MIB::alertSWCConfigurationFailure,,,,,,Software configuration failure.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10530,IDRAC-MIB::alertSWCConfigurationWarning,,,,,,Software configuration warning.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10531,IDRAC-MIB::alertSWCConfigurationInformation,,,,,,Software configuration Information.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10547,IDRAC-MIB::alertIPAddressConfigurationInformation,,,,,,IP Address configuration information.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10578,IDRAC-MIB::alertSecurityConfigurationWarning,,,,,,Security configuration warning.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10611,IDRAC-MIB::alertPCIDeviceConfigurationInformation,,,,,,PCI device configuration information.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10635,IDRAC-MIB::alertAutoDiscoveryInformation,,,,,,Auto discovery information.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10770,IDRAC-MIB::alertNetworkConfigurationWarning,,,,,,Network configuration warning.
.1.3.6.1.4.1.674.10892.5.3.2.5.0.10771,IDRAC-MIB::alertNetworkConfigurationInformation,,,,,,Network configuration information.
.1.3.6.1.4.1.674.10892.5.4,IDRAC-MIB::systemDetailsGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.1,IDRAC-MIB::mIBVersionGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.1.1,IDRAC-MIB::mIBMajorVersionNumber,INTEGER,read-only,,mandatory,,0001.0001 This attribute defines the major version number for the version of this MIB supported by the iDRAC.
.1.3.6.1.4.1.674.10892.5.4.1.2,IDRAC-MIB::mIBMinorVersionNumber,INTEGER,read-only,,mandatory,,0001.0002 This attribute defines the minor version number for the version of this MIB supported by the iDRAC.
.1.3.6.1.4.1.674.10892.5.4.1.3,IDRAC-MIB::mIBMaintenanceVersionNumber,INTEGER,read-only,,mandatory,,0001.0003 This attribute defines the maintenance version number for the version of this MIB supported by the iDRAC.
.1.3.6.1.4.1.674.10892.5.4.200,IDRAC-MIB::systemStateGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.200.10,IDRAC-MIB::systemStateTable,,not-accessible,,mandatory,,0200.0010 This object defines the System State Table.
.1.3.6.1.4.1.674.10892.5.4.200.10.1,IDRAC-MIB::systemStateTableEntry,,not-accessible,systemStatechassisIndex,mandatory,,0200.0010.0001 This object defines the System State Table Entry.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.1,IDRAC-MIB::systemStatechassisIndex,INTEGER,read-only,,mandatory,,0200.0010.0001.0001 This attribute defines the index (one based) of this system chassis.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.2,IDRAC-MIB::systemStateGlobalSystemStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0002 This attribute defines the global system status of all system chassis being monitored by the systems management software.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.3,IDRAC-MIB::systemStateChassisState,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0200.0010.0001.0003 This attribute defines the state settings of this system chassis.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.4,IDRAC-MIB::systemStateChassisStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0004 This attribute defines the status of this system chassis.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.5,IDRAC-MIB::systemStatePowerUnitStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0005 This attribute lists the state settings of each power unit of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a power unit. The first byte returned represents the state settings of the first power unit, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.6,IDRAC-MIB::systemStatePowerUnitStatusRedundancy,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0200.0010.0001.0006 This attribute defines the combined redundancy status of all power units of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.7,IDRAC-MIB::systemStatePowerUnitStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0007 This attribute lists the redundancy status of each power unit of this system. The results are returned as a binary octet string where each byte of the octet string represents the redundancy status of a power unit. The first byte returned represents the redundancy status of the first power unit, etc. The bytes have the same definition type as StatusRedundancyEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.8,IDRAC-MIB::systemStatePowerSupplyStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0008 This attribute lists the state settings of each power supply of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a power supply. The first byte returned represents the state settings of the first power supply, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.9,IDRAC-MIB::systemStatePowerSupplyStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0009 This attribute defines the combined status of all power supplies of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.10,IDRAC-MIB::systemStatePowerSupplyStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0010 This attribute lists the status of each power supply of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a power supply. The first byte returned represents the status of the first power supply, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.11,IDRAC-MIB::systemStateVoltageStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0011 This attribute lists the state settings of each voltage probe of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a voltage probe. The first byte returned represents the state settings of the first voltage probe, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.12,IDRAC-MIB::systemStateVoltageStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0012 This attribute defines the combined status of all voltage probes of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.13,IDRAC-MIB::systemStateVoltageStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0013 This attribute lists the status of each voltage probe of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a voltage probe. The first byte returned represents the status of the first voltage probe, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.14,IDRAC-MIB::systemStateAmperageStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0014 This attribute lists the state settings of each amperage probe of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of an amperage probe. The first byte returned represents the state settings of the first amperage probe, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.15,IDRAC-MIB::systemStateAmperageStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0015 This attribute defines the combined status of all amperage probes of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.16,IDRAC-MIB::systemStateAmperageStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0016 This attribute lists the status of each amperage probe of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of an amperage probe. The first byte returned represents the status of the first amperage probe, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.17,IDRAC-MIB::systemStateCoolingUnitStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0017 This attribute lists the state settings of each cooling unit of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a cooling unit. The first byte returned represents the state settings of the first cooling unit, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.18,IDRAC-MIB::systemStateCoolingUnitStatusRedundancy,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0200.0010.0001.0018 This attribute defines the combined redundancy status of all cooling units of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.19,IDRAC-MIB::systemStateCoolingUnitStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0019 This attribute lists the redundancy status of each cooling unit of this system. The results are returned as a binary octet string where each byte of the octet string represents the redundancy status of a cooling unit. The first byte returned represents the redundancy status of the first cooling unit, etc. The bytes have the same definition type as StatusRedundancyEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.20,IDRAC-MIB::systemStateCoolingDeviceStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0020 This attribute lists the state settings of each cooling device of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a cooling device. The first byte returned represents the state settings of the first cooling device, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.21,IDRAC-MIB::systemStateCoolingDeviceStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0021 This attribute defines the combined status of all cooling devices of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.22,IDRAC-MIB::systemStateCoolingDeviceStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0022 This attribute lists the status of each cooling device of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a cooling device. The first byte returned represents the status of the first cooling device, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.23,IDRAC-MIB::systemStateTemperatureStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0023 This attribute lists the state settings of each temperature probe of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a temperature probe. The first byte returned represents the state settings of the first temperature probe, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.24,IDRAC-MIB::systemStateTemperatureStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0024 This attribute defines the combined status of all temperature probes of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.25,IDRAC-MIB::systemStateTemperatureStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0025 This attribute lists the status of each temperature probe of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a temperature probe. The first byte returned represents the status of the first temperature probe, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.26,IDRAC-MIB::systemStateMemoryDeviceStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0026 This attribute lists the state settings of each memory device of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a memory device. The first byte returned represents the state settings of the first memory device, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.27,IDRAC-MIB::systemStateMemoryDeviceStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0027 This attribute defines the combined status of all memory devices of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.28,IDRAC-MIB::systemStateMemoryDeviceStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0028 This attribute lists the status of each memory device of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a memory device. The first byte returned represents the status of the first memory device, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.29,IDRAC-MIB::systemStateChassisIntrusionStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0029 This attribute lists the state settings of each intrusion detection device of this system chassis. The results are returned as a binary octet string where each byte of the octet string represents the state settings of an intrusion detection device. The first byte returned represents the state settings of the first intrusion detection device, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.30,IDRAC-MIB::systemStateChassisIntrusionStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0030 This attribute defines the combined status of all intrusion detection devices of this system chassis.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.31,IDRAC-MIB::systemStateChassisIntrusionStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0031 This attribute lists the status of each intrusion detection device of this system chassis. The results are returned as a binary octet string where each byte of the octet string represents the status of an intrusion detection device. The first byte returned represents the status of the first intrusion detection device, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.42,IDRAC-MIB::systemStatePowerUnitStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0042 This attribute defines the combined status of all power units of this chassis.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.43,IDRAC-MIB::systemStatePowerUnitStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0043 This attribute lists the status of each power unit of this chassis. The results are returned as a binary octet string where each byte of the octet string represents the status of a power unit. The first byte returned represents the status of the first power unit, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.44,IDRAC-MIB::systemStateCoolingUnitStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0044 This attribute defines the combined status of all cooling units of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.45,IDRAC-MIB::systemStateCoolingUnitStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0045 This attribute lists the status of each cooling unit of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a cooling unit. The first byte returned represents the status of the first cooling unit, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.50,IDRAC-MIB::systemStateProcessorDeviceStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0050 This attribute defines the combined status of all processor devices of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.51,IDRAC-MIB::systemStateProcessorDeviceStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0051 This attribute lists the status of each processor device of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a processor device. The first byte returned represents the status of the first processor device, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.52,IDRAC-MIB::systemStateBatteryStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0052 This attribute defines the combined status of all batteries of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.53,IDRAC-MIB::systemStateBatteryStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0053 This attribute lists the status of each battery of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a battery. The first byte returned represents the status of the first battery, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.54,IDRAC-MIB::systemStateSDCardUnitStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0054 This attribute defines the combined status of all SD Card units of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.55,IDRAC-MIB::systemStateSDCardUnitStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0055 This attribute lists the status of each SD Card unit of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a SD Card unit. The first byte returned represents the status of the first SD Card unit, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.56,IDRAC-MIB::systemStateSDCardDeviceStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0056 This attribute defines the combined status of all SD Card devices of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.57,IDRAC-MIB::systemStateSDCardDeviceStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0057 This attribute lists the status of each SD Card device of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a SD Card device. The first byte returned represents the status of the first SD Card device, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.58,IDRAC-MIB::systemStateIDSDMCardUnitStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0058 This attribute defines the combined status of all IDSDM Card units of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.59,IDRAC-MIB::systemStateIDSDMCardUnitStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0059 This attribute lists the status of each IDSDM Card unit of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of an IDSDM Card unit. The first byte returned represents the status of the first IDSDM Card unit, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.60,IDRAC-MIB::systemStateIDSDMCardDeviceStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0060 This attribute defines the combined status of all IDSDM Card devices of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.61,IDRAC-MIB::systemStateIDSDMCardDeviceStatusList,OCTET,read-only,,mandatory,,0200.0010.0001.0061 This attribute lists the status of each IDSDM Card device of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of an IDSDM Card device. The first byte returned represents the status of the first IDSDM Card device, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.62,IDRAC-MIB::systemStateTemperatureStatisticsStateDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0062 This attribute lists the state settings of each temperature statistics object of this system. The results are returned as a binary octet string where each byte of the octet string represents the state settings of a temperature statistics object. The first byte returned represents the state settings of the first temperature statistics object, etc. The bytes have the same definition type as StateSettingsFlags.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.63,IDRAC-MIB::systemStateTemperatureStatisticsStatusCombined,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0063 This attribute defines the combined status of all temperature statistics objects of this system.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.64,IDRAC-MIB::systemStateTemperatureStatisticsStatusDetails,OCTET,read-only,,mandatory,,0200.0010.0001.0064 This attribute lists the status of each temperature statistics object of this system. The results are returned as a binary octet string where each byte of the octet string represents the status of a temperature statistics object. The first byte returned represents the status of the first temperature statistics object, etc. The bytes have the same definition type as ObjectStatusEnum.
.1.3.6.1.4.1.674.10892.5.4.200.10.1.65,IDRAC-MIB::systemStateCMCStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0010.0001.0065 This attribute defines the status of CMC.
.1.3.6.1.4.1.674.10892.5.4.300,IDRAC-MIB::chassisInformationGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.300.1,IDRAC-MIB::numEventLogEntries,INTEGER,read-only,,mandatory,,0300.0001.0000 This attribute provides the number of entries currently in the eventLogTable.
.1.3.6.1.4.1.674.10892.5.4.300.2,IDRAC-MIB::numLCLogEntries,INTEGER,read-only,,mandatory,,0300.0002.0000 This attribute provides the number of entries currently in the lcLogTable. Note: This attribute can only be accessed via SNMPv3 queries.
.1.3.6.1.4.1.674.10892.5.4.300.10,IDRAC-MIB::chassisInformationTable,,not-accessible,,mandatory,,0300.0010 This object defines the Chassis Information Table.
.1.3.6.1.4.1.674.10892.5.4.300.10.1,IDRAC-MIB::chassisInformationTableEntry,,not-accessible,chassisIndexChassisInformation,mandatory,,0300.0010.0001 This object defines the Chassis Information Table Entry.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.1,IDRAC-MIB::chassisIndexChassisInformation,INTEGER,read-only,,mandatory,,0300.0010.0001.0001 This attribute defines the index (one based) of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.2,IDRAC-MIB::chassisStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0010.0001.0002 This attribute defines the state capabilities of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.3,IDRAC-MIB::chassisStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0010.0001.0003 This attribute defines the state settings of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.4,IDRAC-MIB::chassisStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0300.0010.0001.0004 This attribute defines the status of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.5,IDRAC-MIB::chassisparentIndexReference,INTEGER,read-only,,mandatory,,0300.0010.0001.0005 This attribute defines the index (one based) to the parent system of this system chassis, if any.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.6,IDRAC-MIB::chassisType,INTEGER,read-only,,mandatory,other(1):unknown(2):desktop(3):lowProfileDesktop(4):pizzaBox(5):miniTower(6):tower(7):portable(8):lapTop(9):noteBook(10):handHeld(11):dockingStation(12):allInOne(13):subNoteBook(14):spaceSaving(15):lunchBox(16):mainSystemChassis(17):expansionChassis(18):subChassis(19):busExpansionChassis(20):peripheralChassis(21):raidChassis(22):rackMountChassis(23):sealedCasePC(24):multiSystemChassis(25),0300.0010.0001.0006 This attribute defines the system type of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.7,IDRAC-MIB::chassisName,OCTET,read-only,,mandatory,,0300.0010.0001.0007 This attribute defines the user-assigned name of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.8,IDRAC-MIB::chassisManufacturerName,OCTET,read-only,,mandatory,,0300.0010.0001.0008 This attribute defines the name of the manufacturer of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.9,IDRAC-MIB::chassisModelTypeName,OCTET,read-only,,mandatory,,0300.0010.0001.0009 This attribute defines the system model type of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.10,IDRAC-MIB::chassisAssetTagName,OCTET,read-only,,mandatory,,0300.0010.0001.0010 This attribute defines the asset tag name of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.11,IDRAC-MIB::chassisServiceTagName,OCTET,read-only,,mandatory,,0300.0010.0001.0011 This attribute defines the service tag name of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.12,IDRAC-MIB::chassisID,INTEGER,read-only,,mandatory,,0300.0010.0001.0012 This attribute defines the system ID. If the value is 254 (0xFE), the attribute systemIDExtension provides the system ID.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.13,IDRAC-MIB::chassisIDExtension,INTEGER,read-only,,mandatory,,0300.0010.0001.0013 This attribute defines the system ID extension.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.14,IDRAC-MIB::chassisSystemClass,INTEGER,read-only,,mandatory,other(1):unknown(2):workstationClass(3):serverClass(4):desktopClass(5):portableClass(6):netPCClass(7):storageClass(8),0300.0010.0001.0014 This attribute defines the system class.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.15,IDRAC-MIB::chassisSystemName,OCTET,read-only,,mandatory,,0300.0010.0001.0015 This attribute defines the host name of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.24,IDRAC-MIB::chassisLEDControlCapabilitiesUnique,INTEGER,read-only,,mandatory,unknown(1):alertOnErrorCapable(2):alertOnWarningAndErrorCapable(4):alertOnWarningOrErrorCapable(6),0300.0010.0001.0024 This attribute defines the capabilities of the LED control hardware in the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.25,IDRAC-MIB::chassisLEDControlSettingsUnique,INTEGER,read-only,,mandatory,unknown(1):alertOnError(2):alertOnWarningAndError(4),0300.0010.0001.0025 This attribute defines the reading and setting of the LED control hardware in the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.28,IDRAC-MIB::chassisIdentifyFlashControlCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):identifyCapable(8),0300.0010.0001.0028 This attribute defines if the system allows setting of the system front panel LED to flash.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.29,IDRAC-MIB::chassisIdentifyFlashControlSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):identifyChassis(8):identifyChassisAndEnable(10),0300.0010.0001.0029 This attribute setting causes the system front panel LED to flash.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.30,IDRAC-MIB::chassisLockPresent,INTEGER,read-only,,mandatory,,0300.0010.0001.0030 If true, a system lock is present on the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.31,IDRAC-MIB::chassishostControlCapabilitiesUnique,INTEGER,read-only,,mandatory,manualRebootCapable(1):manualPowerOFFCapable(2):manualPowerCycleCapable(4):manualAllExceptOperatingSystemShutdownCapable(7):manualOperatingSystemShutdownCapable(8):manualFullyCapable(15):manualRebootWithOSShutdownCapable(16):manualRebootWithoutOSShutdownCapable(32):manualPowerOffWithOSShutdownCapable(64):manualPowerOffWithoutOSShutdownCapable(128):manualPowerCycleWithOSShutdownCapable(256):manualPowerCycleWithoutOSShutdownCapable(512),0300.0010.0001.0031 This attribute defines the capabilities of the host control function.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.32,IDRAC-MIB::chassishostControlSettingsUnique,INTEGER,read-only,,mandatory,manualReboot(1):manualPowerOFF(2):manualPowerCycle(4):manualOperatingSystemShutdown(8):manualOperatingSystemShutdownThenReboot(9):manualOperatingSystemShutdownThenPowerOFF(10):manualOperatingSystemShutdownThenPowerCycle(12),0300.0010.0001.0032 This attribute defines the settings of the host control function.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.33,IDRAC-MIB::chassiswatchDogControlCapabilitiesUnique,INTEGER,read-only,,mandatory,automaticRebootCapable(1):automaticPowerCycleCapable(2):automaticNotificationCapable(4):automaticWatchDogTimerCapable(8):automaticPowerOffCapable(16):automaticAllExceptNotificationCapable(27):automaticFullyCapable(31),0300.0010.0001.0033 This attribute defines the capabilities of the watchdog control function.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.34,IDRAC-MIB::chassiswatchDogControlSettingsUnique,INTEGER,read-only,,mandatory,automaticRebootEnabled(1):automaticPowerCycleEnabled(2):automaticNotificationEnabled(4):automaticPowerOffEnabled(8),0300.0010.0001.0034 This attribute defines the settings of the watchdog control function.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.35,IDRAC-MIB::chassiswatchDogControlExpiryTimeCapabilitiesUnique,INTEGER,read-only,,mandatory,type1Capable(1):type2Capable(2):type3Capable(4),0300.0010.0001.0035 This attribute defines the capabilities of the watchdog control expiry timer function.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.36,IDRAC-MIB::chassiswatchDogControlExpiryTime,INTEGER,read-only,,mandatory,,0300.0010.0001.0036 This attribute defines the current watchdog timer value in seconds.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.38,IDRAC-MIB::chassisPowerButtonControlCapabilitiesUnique,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2),0300.0010.0001.0038 This attribute defines the capabilities of the power button control hardware in the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.39,IDRAC-MIB::chassisPowerButtonControlSettingsUnique,INTEGER,read-only,,mandatory,unknown(1):enabled(2):disabled(4),0300.0010.0001.0039 This attribute defines the reading and setting of the power button control hardware in the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.44,IDRAC-MIB::chassisNMIButtonControlCapabilitiesUnique,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2),0300.0010.0001.0044 This attribute defines the capabilities of the NMI button control hardware in the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.45,IDRAC-MIB::chassisNMIButtonControlSettingsUnique,INTEGER,read-only,,mandatory,unknown(1):enabled(2):disabled(4),0300.0010.0001.0045 This attribute defines the reading and setting of the NMI button control hardware in the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.46,IDRAC-MIB::chassisSystemProperties,INTEGER,read-only,,mandatory,energySmart(1),0300.0010.0001.0046 This attribute defines the properties of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.47,IDRAC-MIB::chassisSystemRevisionNumber,INTEGER,read-only,,mandatory,,0300.0010.0001.0047 This attribute defines the revision number of the system where zero indicates the original version of the system chassis. The revision number is not available on all systems.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.48,IDRAC-MIB::chassisSystemRevisionName,OCTET,read-only,,mandatory,,0300.0010.0001.0048 This attribute defines the revision name of the system, if applicable.
.1.3.6.1.4.1.674.10892.5.4.300.10.1.49,IDRAC-MIB::chassisExpressServiceCodeName,OCTET,read-only,,mandatory,,0300.0010.0001.0049 This attribute defines the Express Service Code of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.40,IDRAC-MIB::eventLogTable,,not-accessible,,mandatory,,0300.0040 This object defines the Event (ESM) Log Table.
.1.3.6.1.4.1.674.10892.5.4.300.40.1,IDRAC-MIB::eventLogTableEntry,,not-accessible,eventLogchassisIndex:eventLogRecordIndex,mandatory,,0300.0040.0001 This object defines the Event (ESM) Log Table Entry.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.1,IDRAC-MIB::eventLogchassisIndex,INTEGER,read-only,,mandatory,,0300.0040.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.2,IDRAC-MIB::eventLogRecordIndex,INTEGER,read-only,,mandatory,,0300.0040.0001.0002 This attribute defines the index (one based) of the event log record.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.3,IDRAC-MIB::eventLogStateCapabilitiesUnique,INTEGER,read-only,,mandatory,unknown(1):onlineCapable(2):notReadyCapable(4):resetCapable(8),0300.0040.0001.0003 This attribute defines the state capabilities of the object that is writing the event log.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.4,IDRAC-MIB::eventLogStateSettingsUnique,INTEGER,read-only,,mandatory,unknown(1):online(2):notReady(4):reset(8),0300.0040.0001.0004 This attribute defines the state settings of the object that is writing the event log.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.5,IDRAC-MIB::eventLogRecord,OCTET,read-only,,mandatory,,0300.0040.0001.0005 This attribute defines the data of the event log record.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.6,IDRAC-MIB::eventLogFormat,INTEGER,read-only,,mandatory,raw(1):ascii(2):uniCode(3),0300.0040.0001.0006 This attribute defines the format of the event log record.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.7,IDRAC-MIB::eventLogSeverityStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0300.0040.0001.0007 This attribute defines the severity of the event log record.
.1.3.6.1.4.1.674.10892.5.4.300.40.1.8,IDRAC-MIB::eventLogDateName,OCTET,read-only,,mandatory,,0300.0040.0001.0008 This attribute defines the date and time of the event log record.
.1.3.6.1.4.1.674.10892.5.4.300.50,IDRAC-MIB::systemBIOSTable,,not-accessible,,mandatory,,0300.0050 This object defines the System BIOS Table.
.1.3.6.1.4.1.674.10892.5.4.300.50.1,IDRAC-MIB::systemBIOSTableEntry,,not-accessible,systemBIOSchassisIndex:systemBIOSIndex,mandatory,,0300.0050.0001 This object defines the System BIOS Table Entry.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.1,IDRAC-MIB::systemBIOSchassisIndex,INTEGER,read-only,,mandatory,,0300.0050.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.2,IDRAC-MIB::systemBIOSIndex,INTEGER,read-only,,mandatory,,0300.0050.0001.0002 This attribute defines the index (one based) of the system BIOS.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.3,IDRAC-MIB::systemBIOSStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0050.0001.0003 This attribute defines the state capabilities of the system BIOS.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.4,IDRAC-MIB::systemBIOSStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0050.0001.0004 This attribute defines the state settings of the system BIOS.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.5,IDRAC-MIB::systemBIOSStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0300.0050.0001.0005 This attribute defines the status of the system BIOS.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.7,IDRAC-MIB::systemBIOSReleaseDateName,OCTET,read-only,,mandatory,,0300.0050.0001.0007 This attribute defines the release date name of the system BIOS.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.8,IDRAC-MIB::systemBIOSVersionName,OCTET,read-only,,mandatory,,0300.0050.0001.0008 This attribute defines the version name of the system BIOS.
.1.3.6.1.4.1.674.10892.5.4.300.50.1.11,IDRAC-MIB::systemBIOSManufacturerName,OCTET,read-only,,mandatory,,0300.0050.0001.0011 This attribute defines the name of the manufacturer of the system BIOS.
.1.3.6.1.4.1.674.10892.5.4.300.60,IDRAC-MIB::firmwareTable,,not-accessible,,mandatory,,0300.0060 This object defines the Firmware Table.
.1.3.6.1.4.1.674.10892.5.4.300.60.1,IDRAC-MIB::firmwareTableEntry,,not-accessible,firmwarechassisIndex:firmwareIndex,mandatory,,0300.0060.0001 This object defines the Firmware Table Entry.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.1,IDRAC-MIB::firmwarechassisIndex,INTEGER,read-only,,mandatory,,0300.0060.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.2,IDRAC-MIB::firmwareIndex,INTEGER,read-only,,mandatory,,0300.0060.0001.0002 This attribute defines the index (one based) of the firmware.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.3,IDRAC-MIB::firmwareStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0060.0001.0003 This attribute defines the state capabilities of the firmware.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.4,IDRAC-MIB::firmwareStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0060.0001.0004 This attribute defines the state settings of the firmware.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.5,IDRAC-MIB::firmwareStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0300.0060.0001.0005 This attribute defines the status of the firmware.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.6,IDRAC-MIB::firmwareSize,INTEGER,read-only,,mandatory,,0300.0060.0001.0006 This attribute defines the image size of the firmware in KBytes. Zero indicates size is unknown.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.7,IDRAC-MIB::firmwareType,INTEGER,read-only,,mandatory,other(1):unknown(2):lifecycleController(20):iDRAC7(21):iDRAC8(22):iDRAC9(23),0300.0060.0001.0007 This attribute defines the type of firmware.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.8,IDRAC-MIB::firmwareTypeName,OCTET,read-only,,mandatory,,0300.0060.0001.0008 This attribute defines the type name of the firmware.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.9,IDRAC-MIB::firmwareUpdateCapabilities,INTEGER,read-only,,mandatory,,0300.0060.0001.0009 This attribute defines the bitmap of supported methods for firmware update.
.1.3.6.1.4.1.674.10892.5.4.300.60.1.11,IDRAC-MIB::firmwareVersionName,OCTET,read-only,,mandatory,,0300.0060.0001.0011 This attribute defines the version of the firmware.
.1.3.6.1.4.1.674.10892.5.4.300.70,IDRAC-MIB::intrusionTable,,not-accessible,,mandatory,,0300.0070 This object defines the Intrusion Table.
.1.3.6.1.4.1.674.10892.5.4.300.70.1,IDRAC-MIB::intrusionTableEntry,,not-accessible,intrusionchassisIndex:intrusionIndex,mandatory,,0300.0070.0001 This object defines the Intrusion Table Entry.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.1,IDRAC-MIB::intrusionchassisIndex,INTEGER,read-only,,mandatory,,0300.0070.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.2,IDRAC-MIB::intrusionIndex,INTEGER,read-only,,mandatory,,0300.0070.0001.0002 This attribute defines the index (one based) of the intrusion sensor.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.3,IDRAC-MIB::intrusionStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0300.0070.0001.0003 This attribute defines the state capabilities of the intrusion sensor.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.4,IDRAC-MIB::intrusionStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0300.0070.0001.0004 This attribute defines the state settings of the intrusion sensor.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.5,IDRAC-MIB::intrusionStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0300.0070.0001.0005 This attribute defines the status of the intrusion sensor.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.6,IDRAC-MIB::intrusionReading,INTEGER,read-only,,mandatory,chassisNotBreached(1):chassisBreached(2):chassisBreachedPrior(3):chassisBreachSensorFailure(4),0300.0070.0001.0006 This attribute defines the reading of the intrusion sensor.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.7,IDRAC-MIB::intrusionType,INTEGER,read-only,,mandatory,chassisBreachDetectionWhenPowerON(1):chassisBreachDetectionWhenPowerOFF(2),0300.0070.0001.0007 This attribute defines the type of the intrusion sensor.
.1.3.6.1.4.1.674.10892.5.4.300.70.1.8,IDRAC-MIB::intrusionLocationName,OCTET,read-only,,mandatory,,0300.0070.0001.0008 This attribute defines the location of the intrusion sensor.
.1.3.6.1.4.1.674.10892.5.4.300.90,IDRAC-MIB::lcLogTable,,not-accessible,,mandatory,,0300.0090 This object defines the Lifecycle (LC) Log Table. Lifecycle (LC) Log table records are ordered from oldest to newest. Note: This table can only be accessed via SNMPv3 queries.
.1.3.6.1.4.1.674.10892.5.4.300.90.1,IDRAC-MIB::lcLogTableEntry,,not-accessible,lcLogChassisIndex:lcLogRecordIndex,mandatory,,0300.0090.0001 This object defines the Lifcycle (LC) Log Table Entry.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.1,IDRAC-MIB::lcLogChassisIndex,INTEGER,read-only,,mandatory,,0300.0090.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.2,IDRAC-MIB::lcLogRecordIndex,INTEGER,read-only,,mandatory,,0300.0090.0001.0002 This attribute defines the index (one based) of the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.3,IDRAC-MIB::lcLogSequenceNumber,INTEGER,read-only,,mandatory,,0300.0090.0001.0003 This attribute defines the LC Log sequence number of the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.4,IDRAC-MIB::lcLogCategory,INTEGER,read-only,,mandatory,system(1):storage(2):updates(3):audit(4):configuration(5):workNotes(6),0300.0090.0001.0004 This attribute defines the category of the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.5,IDRAC-MIB::lcLogSeverityStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0300.0090.0001.0005 This attribute defines the severity of the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.6,IDRAC-MIB::lcLogDateName,OCTET,read-only,,mandatory,,0300.0090.0001.0006 This attribute defines the date and time of the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.7,IDRAC-MIB::lcLogFQDD,OCTET,read-only,,mandatory,,0300.0090.0001.0007 Fully qualified device descriptor (FQDD) of the device associated with the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.8,IDRAC-MIB::lcLogMessageID,OCTET,read-only,,mandatory,,0300.0090.0001.0008 This attribute defines the Message ID of the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.9,IDRAC-MIB::lcLogMessage,OCTET,read-only,,mandatory,,0300.0090.0001.0009 This attribute defines the message of the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.10,IDRAC-MIB::lcLogDetailedDescription,OCTET,read-only,,mandatory,,0300.0090.0001.0010 This attribute defines the detailed description of the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.11,IDRAC-MIB::lcLogRecommededAction,OCTET,read-only,,mandatory,,0300.0090.0001.0011 This attribute defines an optional recommended action associated with the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.300.90.1.12,IDRAC-MIB::lcLogComment,OCTET,read-only,,mandatory,,0300.0090.0001.0012 This attribute defines an optional user comment associated with the event associated with the LC log record.
.1.3.6.1.4.1.674.10892.5.4.600,IDRAC-MIB::powerGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.600.10,IDRAC-MIB::powerUnitTable,,not-accessible,,mandatory,,0600.0010 This object defines the Power Unit Table.
.1.3.6.1.4.1.674.10892.5.4.600.10.1,IDRAC-MIB::powerUnitTableEntry,,not-accessible,powerUnitchassisIndex:powerUnitIndex,mandatory,,0600.0010.0001 This object defines the Power Unit Table Entry.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.1,IDRAC-MIB::powerUnitchassisIndex,INTEGER,read-only,,mandatory,,0600.0010.0001.0001 This attribute defines the index (one based) of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.2,IDRAC-MIB::powerUnitIndex,INTEGER,read-only,,mandatory,,0600.0010.0001.0002 This attribute defines the index (one based) of the power unit.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.3,IDRAC-MIB::powerUnitStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0010.0001.0003 This attribute defines the state capabilities of the power unit.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.4,IDRAC-MIB::powerUnitStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0010.0001.0004 This attribute defines the state settings of the power unit.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.5,IDRAC-MIB::powerUnitRedundancyStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0600.0010.0001.0005 This attribute defines the redundancy status of the power unit.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.6,IDRAC-MIB::powerSupplyCountForRedundancy,INTEGER,read-only,,mandatory,,0600.0010.0001.0006 This attribute defines the total number of power supplies required for this power unit to have full redundancy.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.7,IDRAC-MIB::powerUnitName,OCTET,read-only,,mandatory,,0600.0010.0001.0007 This attribute defines the name of the power unit.
.1.3.6.1.4.1.674.10892.5.4.600.10.1.8,IDRAC-MIB::powerUnitStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0600.0010.0001.0008 This attribute defines the status of the power unit.
.1.3.6.1.4.1.674.10892.5.4.600.12,IDRAC-MIB::powerSupplyTable,,not-accessible,,mandatory,,0600.0012 This object defines the Power Supply Table.
.1.3.6.1.4.1.674.10892.5.4.600.12.1,IDRAC-MIB::powerSupplyTableEntry,,not-accessible,powerSupplychassisIndex:powerSupplyIndex,mandatory,,0600.0012.0001 This object defines the Power Supply Table Entry.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.1,IDRAC-MIB::powerSupplychassisIndex,INTEGER,read-only,,mandatory,,0600.0012.0001.0001 This attribute defines the index (one based) of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.2,IDRAC-MIB::powerSupplyIndex,INTEGER,read-only,,mandatory,,0600.0012.0001.0002 This attribute defines the index (one based) of the power supply.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.3,IDRAC-MIB::powerSupplyStateCapabilitiesUnique,INTEGER,read-only,,mandatory,unknown(1):onlineCapable(2):notReadyCapable(4),0600.0012.0001.0003 This attribute defines the state capabilities of the power supply.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.4,IDRAC-MIB::powerSupplyStateSettingsUnique,INTEGER,read-only,,mandatory,unknown(1):onLine(2):notReady(4):fanFailure(8):onlineAndFanFailure(10):powerSupplyIsON(16):powerSupplyIsOK(32):acSwitchIsON(64):onlineandAcSwitchIsON(66):acPowerIsON(128):onlineAndAcPowerIsON(130):onlineAndPredictiveFailure(210):acPowerAndSwitchAreOnPowerSupplyIsOnIsOkAndOnline(242),0600.0012.0001.0004 This attribute defines the state settings of the power supply.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.5,IDRAC-MIB::powerSupplyStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0600.0012.0001.0005 This attribute defines the status of the power supply.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.6,IDRAC-MIB::powerSupplyOutputWatts,INTEGER,read-only,,mandatory,,0600.0012.0001.0006 This attribute defines the maximum sustained output wattage of the power supply (in tenths of Watts).
.1.3.6.1.4.1.674.10892.5.4.600.12.1.7,IDRAC-MIB::powerSupplyType,INTEGER,read-only,,mandatory,powerSupplyTypeIsOther(1):powerSupplyTypeIsUnknown(2):powerSupplyTypeIsLinear(3):powerSupplyTypeIsSwitching(4):powerSupplyTypeIsBattery(5):powerSupplyTypeIsUPS(6):powerSupplyTypeIsConverter(7):powerSupplyTypeIsRegulator(8):powerSupplyTypeIsAC(9):powerSupplyTypeIsDC(10):powerSupplyTypeIsVRM(11),0600.0012.0001.0007 This attribute defines the type of the power supply.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.8,IDRAC-MIB::powerSupplyLocationName,OCTET,read-only,,mandatory,,0600.0012.0001.0008 This attribute defines the location of the power supply.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.9,IDRAC-MIB::powerSupplyMaximumInputVoltage,INTEGER,read-only,,mandatory,,0600.0012.0001.0009 This attribute defines the maximum input voltage of the power supply (in Volts).
.1.3.6.1.4.1.674.10892.5.4.600.12.1.10,IDRAC-MIB::powerSupplypowerUnitIndexReference,INTEGER,read-only,,mandatory,,0600.0012.0001.0010 This attribute defines the index to the associated power unit if the power supply is part of a power unit.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.11,IDRAC-MIB::powerSupplySensorState,INTEGER,read-only,,mandatory,presenceDetected(1):psFailureDetected(2):predictiveFailure(4):psACLost(8):acLostOrOutOfRange(16):acOutOfRangeButPresent(32):configurationError(64),0600.0012.0001.0011 This attribute defines the state reported by the power supply sensor. This attribute supplements the attribute powerSupplyStateSettingsUnique.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.12,IDRAC-MIB::powerSupplyConfigurationErrorType,INTEGER,read-only,,mandatory,vendorMismatch(1):revisionMismatch(2):processorMissing(3),0600.0012.0001.0012 This attribute defines the type of configuration error reported by the power supply sensor. When the configurationError bit is on in the value for the attribute powerSupplySensorState, a value is returned for this attribute; otherwise, a value is not returned for this attribute.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.13,IDRAC-MIB::powerSupplyPowerMonitorCapable,INTEGER,read-only,,mandatory,,0600.0012.0001.0013 This attribute defines a boolean value that reports whether the power supply is capable of monitoring power consumption.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.14,IDRAC-MIB::powerSupplyRatedInputWattage,INTEGER,read-only,,mandatory,,0600.0012.0001.0014 This attribute defines the rated input wattage of the power supply (in tenths of Watts).
.1.3.6.1.4.1.674.10892.5.4.600.12.1.15,IDRAC-MIB::powerSupplyFQDD,OCTET,read-only,,mandatory,,0600.0012.0001.0015 Fully qualified device descriptor (FQDD) of the power supply.
.1.3.6.1.4.1.674.10892.5.4.600.12.1.16,IDRAC-MIB::powerSupplyCurrentInputVoltage,INTEGER,read-only,,mandatory,,0600.0012.0001.0016 This attribute defines the current input voltage to the power supply (in Volts).
.1.3.6.1.4.1.674.10892.5.4.600.20,IDRAC-MIB::voltageProbeTable,,not-accessible,,mandatory,,0600.0020 This object defines the Voltage Probe Table.
.1.3.6.1.4.1.674.10892.5.4.600.20.1,IDRAC-MIB::voltageProbeTableEntry,,not-accessible,voltageProbechassisIndex:voltageProbeIndex,mandatory,,0600.0020.001 This object defines the Voltage Probe Table Entry.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.1,IDRAC-MIB::voltageProbechassisIndex,INTEGER,read-only,,mandatory,,0600.0020.0001.0001 This attribute defines the index (one based) of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.2,IDRAC-MIB::voltageProbeIndex,INTEGER,read-only,,mandatory,,0600.0020.0001.0002 This attribute defines the index (one based) of the voltage probe.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.3,IDRAC-MIB::voltageProbeStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0020.0001.0003 This attribute defines the state capabilities of the voltage probe.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.4,IDRAC-MIB::voltageProbeStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0020.0001.0004 This attribute defines the state settings of the voltage probe.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.5,IDRAC-MIB::voltageProbeStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0600.0020.0001.0005 This attribute defines the probe status of the voltage probe.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.6,IDRAC-MIB::voltageProbeReading,INTEGER,read-only,,mandatory,,0600.0020.0001.0006 This attribute defines the reading for a voltage probe of type other than voltageProbeTypeIsDiscrete. When the value for voltageProbeType is other than voltageProbeTypeIsDiscrete, the value returned for this attribute is the voltage that the probe is reading in millivolts. When the value for voltageProbeType is voltageProbeTypeIsDiscrete, a value is not returned for this attribute.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.7,IDRAC-MIB::voltageProbeType,INTEGER,read-only,,mandatory,voltageProbeTypeIsOther(1):voltageProbeTypeIsUnknown(2):voltageProbeTypeIs1Point5Volt(3):voltageProbeTypeIs3Point3Volt(4):voltageProbeTypeIs5Volt(5):voltageProbeTypeIsMinus5Volt(6):voltageProbeTypeIs12Volt(7):voltageProbeTypeIsMinus12Volt(8):voltageProbeTypeIsIO(9):voltageProbeTypeIsCore(10):voltageProbeTypeIsFLEA(11):voltageProbeTypeIsBattery(12):voltageProbeTypeIsTerminator(13):voltageProbeTypeIs2Point5Volt(14):voltageProbeTypeIsGTL(15):voltageProbeTypeIsDiscrete(16):voltageProbeTypeIsGenericDiscrete(17):voltageProbeTypeIsPSVoltage(18):voltageProbeTypeIsMemoryStatus(19),0600.0020.0001.0007 This attribute defines the type of the voltage probe.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.8,IDRAC-MIB::voltageProbeLocationName,OCTET,read-only,,mandatory,,0600.0020.0001.0008 This attribute defines the location name of the voltage probe.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.9,IDRAC-MIB::voltageProbeUpperNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0600.0020.0001.0009 This attribute defines the upper nonrecoverable threshold of the voltage probe. The value is an integer representing the voltage of the threshold in millivolts.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.10,IDRAC-MIB::voltageProbeUpperCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0020.0001.0010 This attribute defines the upper critical threshold of the voltage probe. The value is an integer representing the voltage of the threshold in millivolts.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.11,IDRAC-MIB::voltageProbeUpperNonCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0020.0001.0011 This attribute defines the upper noncritical threshold of the voltage probe. The value is an integer representing the voltage of the threshold in millivolts.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.12,IDRAC-MIB::voltageProbeLowerNonCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0020.0001.0012 This attribute defines the lower noncritical threshold of the voltage probe. The value is an integer representing the voltage of the threshold in millivolts.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.13,IDRAC-MIB::voltageProbeLowerCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0020.0001.0013 This attribute defines the lower critical threshold of the voltage probe. The value is an integer representing the voltage of the threshold in millivolts.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.14,IDRAC-MIB::voltageProbeLowerNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0600.0020.0001.0014 This attribute defines the lower nonrecoverable threshold of the voltage probe. The value is an integer representing the voltage of the threshold in millivolts.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.15,IDRAC-MIB::voltageProbeProbeCapabilities,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0600.0020.0001.0015 This attribute defines the probe capabilities of the voltage probe.
.1.3.6.1.4.1.674.10892.5.4.600.20.1.16,IDRAC-MIB::voltageProbeDiscreteReading,INTEGER,read-only,,mandatory,voltageIsGood(1):voltageIsBad(2),0600.0020.0001.0016 This attribute defines the reading for a voltage probe of type voltageProbeTypeIsDiscrete. When the value for voltageProbeType is other than voltageProbeTypeIsDiscrete, a value is not returned for this attribute. When the value for voltageProbeType is voltageProbeTypeIsDiscrete, the value returned for this attribute is the discrete reading for the probe.
.1.3.6.1.4.1.674.10892.5.4.600.30,IDRAC-MIB::amperageProbeTable,,not-accessible,,mandatory,,0600.0030 This object defines the Amperage Probe Table.
.1.3.6.1.4.1.674.10892.5.4.600.30.1,IDRAC-MIB::amperageProbeTableEntry,,not-accessible,amperageProbechassisIndex:amperageProbeIndex,mandatory,,0600.0030.0001 This object defines the Amperage Probe Table Entry.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.1,IDRAC-MIB::amperageProbechassisIndex,INTEGER,read-only,,mandatory,,0600.0030.0001.0001 This attribute defines the index (one based) of the system chassis.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.2,IDRAC-MIB::amperageProbeIndex,INTEGER,read-only,,mandatory,,0600.0030.0001.0002 This attribute defines the index (one based) of the amperage probe.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.3,IDRAC-MIB::amperageProbeStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0030.0001.0003 This attribute defines the state capabilities of the amperage probe.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.4,IDRAC-MIB::amperageProbeStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0030.0001.0004 This attribute defines the state settings of the amperage probe.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.5,IDRAC-MIB::amperageProbeStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0600.0030.0001.0005 This attribute defines the probe status of the amperage probe.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.6,IDRAC-MIB::amperageProbeReading,INTEGER,read-only,,mandatory,,0600.0030.0001.0006 This attribute defines the reading for an amperage probe of type other than amperageProbeTypeIsDiscrete. When the value for amperageProbeType is amperageProbeTypeIsPowerSupplyAmps or amperageProbeTypeIsSystemAmps, the value returned for this attribute is the power usage that the probe is reading in tenths of Amps. When the value for amperageProbeType is amperageProbeTypeIsPowerSupplyWatts or amperageProbeTypeIsSystemWatts, the value returned for this attribute is the power usage that the probe is reading in Watts. When the value for amperageProbeType is other than amperageProbeTypeIsDiscrete, amperageProbeTypeIsPowerSupplyAmps, amperageProbeTypeIsPowerSupplyWatts, amperageProbeTypeIsSystemAmps or amperageProbeTypeIsSystemWatts, the value returned for this attribute is the amperage that the probe is reading in Milliamps. When the value for amperageProbeType is amperageProbeTypeIsDiscrete, a value is not returned for this attribute.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.7,IDRAC-MIB::amperageProbeType,INTEGER,read-only,,mandatory,amperageProbeTypeIsOther(1):amperageProbeTypeIsUnknown(2):amperageProbeTypeIs1Point5Volt(3):amperageProbeTypeIs3Point3volt(4):amperageProbeTypeIs5Volt(5):amperageProbeTypeIsMinus5Volt(6):amperageProbeTypeIs12Volt(7):amperageProbeTypeIsMinus12Volt(8):amperageProbeTypeIsIO(9):amperageProbeTypeIsCore(10):amperageProbeTypeIsFLEA(11):amperageProbeTypeIsBattery(12):amperageProbeTypeIsTerminator(13):amperageProbeTypeIs2Point5Volt(14):amperageProbeTypeIsGTL(15):amperageProbeTypeIsDiscrete(16):amperageProbeTypeIsPowerSupplyAmps(23):amperageProbeTypeIsPowerSupplyWatts(24):amperageProbeTypeIsSystemAmps(25):amperageProbeTypeIsSystemWatts(26),0600.0030.0001.0007 This attribute defines the type of the amperage probe.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.8,IDRAC-MIB::amperageProbeLocationName,OCTET,read-only,,mandatory,,0600.0030.0001.0008 This attribute defines the location of the amperage probe.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.9,IDRAC-MIB::amperageProbeUpperNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0600.0030.0001.0009 This attribute defines the upper nonrecoverable threshold of the amperage probe. The value is an integer representing the amperage of the threshold in milliamps.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.10,IDRAC-MIB::amperageProbeUpperCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0030.0001.0010 This attribute defines the upper critical threshold of the amperage probe. The value is an integer representing the amperage of the threshold in milliamps.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.11,IDRAC-MIB::amperageProbeUpperNonCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0030.0001.0011 This attribute defines the upper noncritical threshold of the amperage probe. The value is an integer representing the amperage of the threshold in milliamps.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.12,IDRAC-MIB::amperageProbeLowerNonCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0030.0001.0012 This attribute defines the lower noncritical threshold of the amperage probe. The value is an integer representing the amperage of the threshold in milliamps.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.13,IDRAC-MIB::amperageProbeLowerCriticalThreshold,INTEGER,read-only,,mandatory,,0600.0030.0001.0013 This attribute defines the lower critical threshold of the amperage probe. The value is an integer representing the amperage of the threshold in milliamps.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.14,IDRAC-MIB::amperageProbeLowerNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0600.0030.0001.0014 This attribute defines the lower nonrecoverable threshold of the amperage probe. The value is an integer representing the amperage of the threshold in milliamps.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.15,IDRAC-MIB::amperageProbeProbeCapabilities,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0600.0030.0001.0015 This attribute defines the probe capabilities of the amperage probe.
.1.3.6.1.4.1.674.10892.5.4.600.30.1.16,IDRAC-MIB::amperageProbeDiscreteReading,INTEGER,read-only,,mandatory,amperageIsGood(1):amperageIsBad(2),0600.0030.0001.0016 This attribute defines the reading for an amperage probe of type amperageProbeTypeIsDiscrete. When the value for amperageProbeType is other than amperageProbeTypeIsDiscrete, a value is not returned for this attribute. When the value for amperageProbeType is amperageProbeTypeIsDiscrete, the value returned for this attribute is the discrete reading for the probe.
.1.3.6.1.4.1.674.10892.5.4.600.50,IDRAC-MIB::systemBatteryTable,,not-accessible,,mandatory,,0600.0050 This object defines the System Battery Table.
.1.3.6.1.4.1.674.10892.5.4.600.50.1,IDRAC-MIB::systemBatteryTableEntry,,not-accessible,systemBatteryChassisIndex:systemBatteryIndex,mandatory,,0600.0050.0001 This object defines the System Battery Table Entry.
.1.3.6.1.4.1.674.10892.5.4.600.50.1.1,IDRAC-MIB::systemBatteryChassisIndex,INTEGER,read-only,,mandatory,,0600.0050.0001.0001 This attribute defines the index (one based) of the system chassis that contains the battery.
.1.3.6.1.4.1.674.10892.5.4.600.50.1.2,IDRAC-MIB::systemBatteryIndex,INTEGER,read-only,,mandatory,,0600.0050.0001.0002 This attribute defines the index (one based) of the battery.
.1.3.6.1.4.1.674.10892.5.4.600.50.1.3,IDRAC-MIB::systemBatteryStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0050.0001.0003 This attribute defines the state capabilities of the battery.
.1.3.6.1.4.1.674.10892.5.4.600.50.1.4,IDRAC-MIB::systemBatteryStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0050.0001.0004 This attribute defines the state settings of the battery.
.1.3.6.1.4.1.674.10892.5.4.600.50.1.5,IDRAC-MIB::systemBatteryStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0600.0050.0001.0005 This attribute defines the status of the battery.
.1.3.6.1.4.1.674.10892.5.4.600.50.1.6,IDRAC-MIB::systemBatteryReading,INTEGER,read-only,,mandatory,predictiveFailure(1):failed(2):presenceDetected(4),0600.0050.0001.0006 This attribute defines the reading of the battery.
.1.3.6.1.4.1.674.10892.5.4.600.50.1.7,IDRAC-MIB::systemBatteryLocationName,OCTET,read-only,,mandatory,,0600.0050.0001.0007 This attribute defines the location of the battery.
.1.3.6.1.4.1.674.10892.5.4.600.60,IDRAC-MIB::powerUsageTable,,not-accessible,,mandatory,,0600.0060 This object defines the Power Usage Table.
.1.3.6.1.4.1.674.10892.5.4.600.60.1,IDRAC-MIB::powerUsageTableEntry,,not-accessible,powerUsageChassisIndex:powerUsageIndex,mandatory,,0600.0060.0001 This object defines the Power Usage Table Entry.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.1,IDRAC-MIB::powerUsageChassisIndex,INTEGER,read-only,,mandatory,,0600.0060.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.2,IDRAC-MIB::powerUsageIndex,INTEGER,read-only,,mandatory,,0600.0060.0001.0002 This attribute defines the index (one based) of the power usage information.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.3,IDRAC-MIB::powerUsageStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0600.0060.0001.0003 This attribute defines the state capabilities of the power usage information.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.4,IDRAC-MIB::powerUsageStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0600.0060.0001.0004 This attribute defines the state settings of the power usage information.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.5,IDRAC-MIB::powerUsageStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0600.0060.0001.0005 This attribute defines the status of the power usage information.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.6,IDRAC-MIB::powerUsageEntityName,OCTET,read-only,,mandatory,,0600.0060.0001.0006 This attribute defines the name of the entity associated with this power usage information.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.7,IDRAC-MIB::powerUsageCumulativeWattage,INTEGER,read-only,,mandatory,,0600.0060.0001.0007 This attribute defines the total wattage used (in Watt-hours) by this entity since the date and time specified by the powerUsageCumulativeWattageStartDateName attribute.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.8,IDRAC-MIB::powerUsageCumulativeWattageStartDateName,OCTET,read-only,,mandatory,,0600.0060.0001.0008 This attribute defines the date and time at which the data collection started for the value reported by the  powerUsageCumulativeWattage attribute.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.9,IDRAC-MIB::powerUsagePeakWatts,INTEGER,read-only,,mandatory,,0600.0060.0001.0009 This attribute defines the peak wattage reading (in Watts) for this entity since the date and time specified by the powerUsagePeakWattsStartDateName attribute.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.10,IDRAC-MIB::powerUsagePeakWattsStartDateName,OCTET,read-only,,mandatory,,0600.0060.0001.0010 This attribute defines the date and time at which the data collection started for the value reported by the  powerUsagePeakWatts attribute.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.11,IDRAC-MIB::powerUsagePeakWattsReadingDateName,OCTET,read-only,,mandatory,,0600.0060.0001.0011 This attribute defines the date and time at which the value reported by the powerUsagePeakWatts attribute was measured.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.12,IDRAC-MIB::powerUsagePeakAmps,INTEGER,read-only,,mandatory,,0600.0060.0001.0012 This attribute defines the peak amperage reading (in tenths of Amps) for this entity since the date and time specified by the powerUsagePeakAmpsStartDateName attribute.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.13,IDRAC-MIB::powerUsagePeakAmpsStartDateName,OCTET,read-only,,mandatory,,0600.0060.0001.0013 This attribute defines the date and time at which the data collection started for the value reported by the  powerUsagePeakAmps attribute.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.14,IDRAC-MIB::powerUsagePeakAmpsReadingDateName,OCTET,read-only,,mandatory,,0600.0060.0001.0014 This attribute defines the date and time at which the value reported by the powerUsagePeakAmps attribute was measured.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.15,IDRAC-MIB::powerUsageIdlePower,INTEGER,read-only,,mandatory,,0600.0060.0001.0015 This attribute defines the system idle power (in Watts). This is the minimum power the system can consume based on the current hardware configuration.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.16,IDRAC-MIB::powerUsageMaxPotentialPower,INTEGER,read-only,,mandatory,,0600.0060.0001.0016 This attribute defines the system maximum potential power (in Watts). This is the maximum power the system can consume based on the current hardware configuration.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.17,IDRAC-MIB::powerUsagePowerCapCapabilities,INTEGER,read-only,,mandatory,enable(1):disable(2),0600.0060.0001.0017 This attribute defines the system power cap capabilities.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.18,IDRAC-MIB::powerUsagePowerCapSetting,INTEGER,read-only,,mandatory,enabled(1),0600.0060.0001.0018 This attribute defines the system power cap setting.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.19,IDRAC-MIB::powerUsagePowerCapValue,INTEGER,read-only,,mandatory,,0600.0060.0001.0019 This attribute defines the system power cap value (in Watts).
.1.3.6.1.4.1.674.10892.5.4.600.60.1.20,IDRAC-MIB::powerUsageInstantaneousHeadroom,INTEGER,read-only,,mandatory,,0600.0060.0001.0020 This attribute defines the system instantaneous headroom (in Watts). This is the theoretical maximum power drawn by the power supply minus instantaneous power draw.
.1.3.6.1.4.1.674.10892.5.4.600.60.1.21,IDRAC-MIB::powerUsagePeakHeadroom,INTEGER,read-only,,mandatory,,0600.0060.0001.0021 This attribute defines the system peak headroom (in Watts). This is the theoretical maximum power drawn by the power supply minus peak power draw.
.1.3.6.1.4.1.674.10892.5.4.700,IDRAC-MIB::thermalGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.700.10,IDRAC-MIB::coolingUnitTable,,not-accessible,,mandatory,,0700.0010 This object defines the Cooling Unit Table.
.1.3.6.1.4.1.674.10892.5.4.700.10.1,IDRAC-MIB::coolingUnitTableEntry,,not-accessible,coolingUnitchassisIndex:coolingUnitIndex,mandatory,,0700.0010.0001 This object defines the Cooling Unit Table Entry.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.1,IDRAC-MIB::coolingUnitchassisIndex,INTEGER,read-only,,mandatory,,0700.0010.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.2,IDRAC-MIB::coolingUnitIndex,INTEGER,read-only,,mandatory,,0700.0010.0001.0002 This attribute defines the index (one based) of the cooling unit.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.3,IDRAC-MIB::coolingUnitStateCapabilties,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0700.0010.0001.0003 This attribute defines the state capabilities of the cooling unit.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.4,IDRAC-MIB::coolingUnitStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0700.0010.0001.0004 This attribute defines the state settings of the cooling unit.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.5,IDRAC-MIB::coolingUnitRedundancyStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):full(3):degraded(4):lost(5):notRedundant(6):redundancyOffline(7),0700.0010.0001.0005 This attribute defines the redundancy status of the cooling unit.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.6,IDRAC-MIB::coolingDeviceCountForRedundancy,INTEGER,read-only,,mandatory,,0700.0010.0001.0006 This attribute defines the total number of cooling devices required for this cooling unit to have full redundancy.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.7,IDRAC-MIB::coolingUnitName,OCTET,read-only,,mandatory,,0700.0010.0001.0007 This attribute defines the name of the cooling unit.
.1.3.6.1.4.1.674.10892.5.4.700.10.1.8,IDRAC-MIB::coolingUnitStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0700.0010.0001.0008 This attribute defines the status of the cooling unit.
.1.3.6.1.4.1.674.10892.5.4.700.12,IDRAC-MIB::coolingDeviceTable,,not-accessible,,mandatory,,0700.0012 This object defines the Cooling Device Table.
.1.3.6.1.4.1.674.10892.5.4.700.12.1,IDRAC-MIB::coolingDeviceTableEntry,,not-accessible,coolingDevicechassisIndex:coolingDeviceIndex,mandatory,,0700.0012.0001 This object defines the Cooling Device Table Entry.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.1,IDRAC-MIB::coolingDevicechassisIndex,INTEGER,read-only,,mandatory,,0700.0012.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.2,IDRAC-MIB::coolingDeviceIndex,INTEGER,read-only,,mandatory,,0700.0012.0001.0002 This attribute defines the index (one based) of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.3,IDRAC-MIB::coolingDeviceStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0700.0012.0001.0003 This attribute defines the state capabilities of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.4,IDRAC-MIB::coolingDeviceStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0700.0012.0001.0004 This attribute defines the state settings of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.5,IDRAC-MIB::coolingDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0700.0012.0001.0005 This attribute defines the probe status of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.6,IDRAC-MIB::coolingDeviceReading,INTEGER,read-only,,mandatory,,0700.0012.0001.0006 This attribute defines the reading for a cooling device of subtype other than coolingDeviceSubTypeIsDiscrete. When the value for coolingDeviceSubType is other than coolingDeviceSubTypeIsDiscrete, the value returned for this attribute is the speed in RPM or the OFF/ON value of the cooling device. When the value for coolingDeviceSubType is coolingDeviceSubTypeIsDiscrete, a value is not returned for this attribute.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.7,IDRAC-MIB::coolingDeviceType,INTEGER,read-only,,mandatory,coolingDeviceTypeIsOther(1):coolingDeviceTypeIsUnknown(2):coolingDeviceTypeIsAFan(3):coolingDeviceTypeIsABlower(4):coolingDeviceTypeIsAChipFan(5):coolingDeviceTypeIsACabinetFan(6):coolingDeviceTypeIsAPowerSupplyFan(7):coolingDeviceTypeIsAHeatPipe(8):coolingDeviceTypeIsRefrigeration(9):coolingDeviceTypeIsActiveCooling(10):coolingDeviceTypeIsPassiveCooling(11),0700.0012.0001.0007 This attribute defines the type of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.8,IDRAC-MIB::coolingDeviceLocationName,OCTET,read-only,,mandatory,,0700.0012.0001.0008 This attribute defines the location name of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.9,IDRAC-MIB::coolingDeviceUpperNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0700.0012.0001.0009 This attribute defines the upper nonrecoverable threshold of the cooling device. The value is an integer representing fan speed in revolutions per minute (RPM). It is not applicable to OFF/ON type cooling devices or non-cooling device types.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.10,IDRAC-MIB::coolingDeviceUpperCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0012.0001.0010 This attribute defines the upper critical threshold of the cooling device. The value is an integer representing fan speed in revolutions per minute (RPM). It is not applicable to OFF/ON type cooling devices or non-cooling device types.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.11,IDRAC-MIB::coolingDeviceUpperNonCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0012.0001.0011 This attribute defines the upper noncritical threshold of the cooling device. The value is an integer representing fan speed in revolutions per minute (RPM). It is not applicable to OFF/ON type cooling devices or non-cooling device types.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.12,IDRAC-MIB::coolingDeviceLowerNonCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0012.0001.0012 This attribute defines the lower noncritical threshold of the cooling device. The value is an integer representing fan speed in revolutions per minute (RPM). It is not applicable to OFF/ON type cooling devices or non-cooling device types.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.13,IDRAC-MIB::coolingDeviceLowerCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0012.0001.0013 This attribute defines the lower critical threshold of the cooling device. The value is an integer representing fan speed in revolutions per minute (RPM). It is not applicable to OFF/ON type cooling devices or non-cooling device types.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.14,IDRAC-MIB::coolingDeviceLowerNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0700.0012.0001.0014 This attribute defines the lower nonrecoverable threshold of the cooling device. The value is an integer representing fan speed in revolutions per minute (RPM). It is not applicable to OFF/ON type cooling devices or non-cooling device types.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.15,IDRAC-MIB::coolingDevicecoolingUnitIndexReference,INTEGER,read-only,,mandatory,,0700.0012.0001.0015 This attribute defines the index to the associated cooling unit.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.16,IDRAC-MIB::coolingDeviceSubType,INTEGER,read-only,,mandatory,coolingDeviceSubTypeIsOther(1):coolingDeviceSubTypeIsUnknown(2):coolingDeviceSubTypeIsAFanThatReadsInRPM(3):coolingDeviceSubTypeIsAFanReadsONorOFF(4):coolingDeviceSubTypeIsAPowerSupplyFanThatReadsinRPM(5):coolingDeviceSubTypeIsAPowerSupplyFanThatReadsONorOFF(6):coolingDeviceSubTypeIsDiscrete(16),0700.0012.0001.0016 This attribute defines the subtype of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.17,IDRAC-MIB::coolingDeviceProbeCapabilities,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0700.0012.0001.0017 This attribute defines the probe capabilities of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.18,IDRAC-MIB::coolingDeviceDiscreteReading,INTEGER,read-only,,mandatory,coolingDeviceIsGood(1):coolingDeviceIsBad(2),0700.0012.0001.0018 This attribute defines the reading for a cooling device of type coolingDeviceSubTypeIsDiscrete. When the value for coolingDeviceSubType is other than coolingDeviceSubTypeIsDiscrete, a value is not returned for this attribute. When the value for coolingDeviceSubType is coolingDeviceSubTypeIsDiscrete, the value returned for this attribute is the discrete reading for the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.12.1.19,IDRAC-MIB::coolingDeviceFQDD,OCTET,read-only,,mandatory,,0700.0012.0001.0019 Fully qualified device descriptor (FQDD) of the cooling device.
.1.3.6.1.4.1.674.10892.5.4.700.20,IDRAC-MIB::temperatureProbeTable,,not-accessible,,mandatory,,0700.0020 This object defines the Temperature Probe Table.
.1.3.6.1.4.1.674.10892.5.4.700.20.1,IDRAC-MIB::temperatureProbeTableEntry,,not-accessible,temperatureProbechassisIndex:temperatureProbeIndex,mandatory,,0700.0020.0001 This object defines the Temperature Probe Table Entry.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.1,IDRAC-MIB::temperatureProbechassisIndex,INTEGER,read-only,,mandatory,,0700.0020.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.2,IDRAC-MIB::temperatureProbeIndex,INTEGER,read-only,,mandatory,,0700.0020.0001.0002 This attribute defines the index (one based) of the temperature probe.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.3,IDRAC-MIB::temperatureProbeStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),0700.0020.0001.0003 This attribute defines the state capabilities of the temperature probe.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.4,IDRAC-MIB::temperatureProbeStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),0700.0020.0001.0004 This attribute defines the state settings of the temperature probe.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.5,IDRAC-MIB::temperatureProbeStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCriticalUpper(4):criticalUpper(5):nonRecoverableUpper(6):nonCriticalLower(7):criticalLower(8):nonRecoverableLower(9):failed(10),0700.0020.0001.0005 This attribute defines the probe status of the temperature probe.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.6,IDRAC-MIB::temperatureProbeReading,INTEGER,read-only,,mandatory,,0700.0020.0001.0006 This attribute defines the reading for a temperature probe of type other than temperatureProbeTypeIsDiscrete. When the value for temperatureProbeType is other than temperatureProbeTypeIsDiscrete, the value returned for this attribute is the temperature that the probe is reading in tenths of degrees Centigrade. When the value for temperatureProbeType is temperatureProbeTypeIsDiscrete, a value is not returned for this attribute.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.7,IDRAC-MIB::temperatureProbeType,INTEGER,read-only,,mandatory,temperatureProbeTypeIsOther(1):temperatureProbeTypeIsUnknown(2):temperatureProbeTypeIsAmbientESM(3):temperatureProbeTypeIsDiscrete(16),0700.0020.0001.0007 This attribute defines the type of the temperature probe.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.8,IDRAC-MIB::temperatureProbeLocationName,OCTET,read-only,,mandatory,,0700.0020.0001.0008 This attribute defines the location name of the temperature probe.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.9,IDRAC-MIB::temperatureProbeUpperNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0700.0020.0001.0009 This attribute defines the upper nonrecoverable threshold of the temperature probe. The value is an integer representing the temperature of the threshold in tenths of degrees Centigrade.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.10,IDRAC-MIB::temperatureProbeUpperCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0020.0001.0010 This attribute defines the upper critical threshold of the temperature probe. The value is an integer representing the temperature of the threshold in tenths of degrees Centigrade.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.11,IDRAC-MIB::temperatureProbeUpperNonCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0020.0001.0011 This attribute defines the upper noncritical threshold of the temperature probe. The value is an integer representing the temperature of the threshold in tenths of degrees Centigrade.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.12,IDRAC-MIB::temperatureProbeLowerNonCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0020.0001.0012 This attribute defines the lower noncritical threshold of the temperature probe. The value is an integer representing the temperature of the threshold in tenths of degrees Centigrade.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.13,IDRAC-MIB::temperatureProbeLowerCriticalThreshold,INTEGER,read-only,,mandatory,,0700.0020.0001.0013 This attribute defines the lower critical threshold of the temperature probe. The value is an integer representing the temperature of the threshold in tenths of degrees Centigrade.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.14,IDRAC-MIB::temperatureProbeLowerNonRecoverableThreshold,INTEGER,read-only,,mandatory,,0700.0020.0001.0014 This attribute defines the lower nonrecoverable threshold of the temperature probe. The value is an integer representing the temperature of the threshold in tenths of degrees Centigrade.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.15,IDRAC-MIB::temperatureProbeProbeCapabilities,INTEGER,read-only,,mandatory,upperNonCriticalThresholdSetCapable(1):lowerNonCriticalThresholdSetCapable(2):upperNonCriticalThresholdDefaultCapable(4):lowerNonCriticalThresholdDefaultCapable(8),0700.0020.0001.0015 This attribute defines the probe capabilities of the temperature probe.
.1.3.6.1.4.1.674.10892.5.4.700.20.1.16,IDRAC-MIB::temperatureProbeDiscreteReading,INTEGER,read-only,,mandatory,temperatureIsGood(1):temperatureIsBad(2),0700.0020.0001.0016 This attribute defines the reading for a temperature probe of type temperatureProbeTypeIsDiscrete. When the value for temperatureProbeType is other than temperatureProbeTypeIsDiscrete, a value is not returned for this attribute. When the value for temperatureProbeType is temperatureProbeTypeIsDiscrete, the value returned for this attribute is the discrete reading for the probe.
.1.3.6.1.4.1.674.10892.5.4.1100,IDRAC-MIB::deviceGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.1100.30,IDRAC-MIB::processorDeviceTable,,not-accessible,,mandatory,,1100.0030 This object defines the Processor Device Table.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1,IDRAC-MIB::processorDeviceTableEntry,,not-accessible,processorDevicechassisIndex:processorDeviceIndex,mandatory,,1100.0030.0001 This object defines the Processor Device Table Entry.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.1,IDRAC-MIB::processorDevicechassisIndex,INTEGER,read-only,,mandatory,,1100.0030.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.2,IDRAC-MIB::processorDeviceIndex,INTEGER,read-only,,mandatory,,1100.0030.0001.0002 This attribute defines the index (one based) of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.3,IDRAC-MIB::processorDeviceStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0030.0001.0003 This attribute defines the state capabilities of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.4,IDRAC-MIB::processorDeviceStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0030.0001.0004 This attribute defines the state settings of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.5,IDRAC-MIB::processorDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1100.0030.0001.0005 This attribute defines the status of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.7,IDRAC-MIB::processorDeviceType,INTEGER,read-only,,mandatory,deviceTypeIsOther(1):deviceTypeIsUnknown(2):deviceTypeIsCPU(3):deviceTypeIsMathProcessor(4):deviceTypeIsDSP(5):deviceTypeIsAVideoProcessor(6),1100.0030.0001.0007 This attribute defines the type of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.8,IDRAC-MIB::processorDeviceManufacturerName,OCTET,read-only,,mandatory,,1100.0030.0001.0008 This attribute defines the name of the manufacturer of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.9,IDRAC-MIB::processorDeviceStatusState,INTEGER,read-only,,mandatory,other(1):unknown(2):enabled(3):userDisabled(4):biosDisabled(5):idle(6),1100.0030.0001.0009 This attribute defines the status state of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.10,IDRAC-MIB::processorDeviceFamily,INTEGER,read-only,,mandatory,deviceFamilyIsOther(1):deviceFamilyIsUnknown(2):deviceFamilyIs8086(3):deviceFamilyIs80286(4):deviceFamilyIsIntel386(5):deviceFamilyIsIntel486(6):deviceFamilyIs8087(7):deviceFamilyIs80287(8):deviceFamilyIs80387(9):deviceFamilyIs80487(10):deviceFamilyIsPentium(11):deviceFamilyIsPentiumPro(12):deviceFamilyIsPentiumII(13):deviceFamilyIsPentiumMMX(14):deviceFamilyIsCeleron(15):deviceFamilyIsPentiumIIXeon(16):deviceFamilyIsPentiumIII(17):deviceFamilyIsPentiumIIIXeon(18):deviceFamilyIsPentiumIIISpeedStep(19):deviceFamilyIsItanium(20):deviceFamilyIsIntelXeon(21):deviceFamilyIsPentium4(22):deviceFamilyIsIntelXeonMP(23):deviceFamilyIsIntelItanium2(24):deviceFamilyIsK5(25):deviceFamilyIsK6(26):deviceFamilyIsK6Dash2(27):deviceFamilyIsK6Dash3(28):deviceFamilyIsAMDAthlon(29):deviceFamilyIsAMD2900(30):deviceFamilyIsK6Dash2Plus(31):deviceFamilyIsPowerPC(32):deviceFamilyIsPowerPC601(33):deviceFamilyIsPowerPC603(34):deviceFamilyIsPowerPC603Plus(35):deviceFamilyIsPowerPC604(36):deviceFamilyIsPowerPC620(37):deviceFamilyIsPowerPCx704(38):deviceFamilyIsPowerPC750(39):deviceFamilyIsIntelCoreDuo(40):deviceFamilyIsIntelCoreDuoMobile(41):deviceFamilyIsIntelCoreSoloMobile(42):deviceFamilyIsIntelAtom(43):deviceFamilyIsAlpha(48):deviceFamilyIsAlpha21064(49):deviceFamilyIsAlpha21066(50):deviceFamilyIsAlpha21164(51):deviceFamilyIsAlpha21164PC(52):deviceFamilyIsAlpha21164a(53):deviceFamilyIsAlpha21264(54):deviceFamilyIsAlpha21364(55):deviceFamilyIsAMDTurionIIUltraDualMobileM(56):deviceFamilyIsAMDTurionIIDualMobileM(57):deviceFamilyIsAMDAthlonIIDualMobileM(58):deviceFamilyIsAMDOpteron6100(59):deviceFamilyIsAMDOpteron4100(60):deviceFamilyIsAMDOpteron6200(61):deviceFamilyIsAMDOpteron4200(62):deviceFamilyIsMIPS(64):deviceFamilyIsMIPSR4000(65):deviceFamilyIsMIPSR4200(66):deviceFamilyIsMIPSR4400(67):deviceFamilyIsMIPSR4600(68):deviceFamilyIsMIPSR10000(69):deviceFamilyIsSPARC(80):deviceFamilyIsSuperSPARC(81):deviceFamilyIsmicroSPARCII(82):deviceFamilyIsmicroSPARCIIep(83):deviceFamilyIsUltraSPARC(84):deviceFamilyIsUltraSPARCII(85):deviceFamilyIsUltraSPARCIIi(86):deviceFamilyIsUltraSPARCIII(87):deviceFamilyIsUltraSPARCIIIi(88):deviceFamilyIs68040(96):deviceFamilyIs68xxx(97):deviceFamilyIs68000(98):deviceFamilyIs68010(99):deviceFamilyIs68020(100):deviceFamilyIs68030(101):deviceFamilyIsAMDZen(107):deviceFamilyIsHobbit(112):deviceFamilyIsCrusoeTM5000(120):deviceFamilyIsCrusoeTM3000(121):deviceFamilyIsEfficeonTM8000(122):deviceFamilyIsWeitek(128):deviceFamilyIsIntelCeleronM(130):deviceFamilyIsAMDAthlon64(131):deviceFamilyIsAMDOpteron(132):deviceFamilyIsAMDSempron(133):deviceFamilyIsAMDTurion64Mobile(134):deviceFamilyIsDualCoreAMDOpteron(135):deviceFamilyIsAMDAthlon64X2DualCore(136):deviceFamilyIsAMDTurion64X2Mobile(137):deviceFamilyIsQuadCoreAMDOpteron(138):deviceFamilyIsThirdGenerationAMDOpteron(139):deviceFamilyIsAMDPhenomFXQuadCore(140):deviceFamilyIsAMDPhenomX4QuadCore(141):deviceFamilyIsAMDPhenomX2DualCore(142):deviceFamilyIsAMDAthlonX2DualCore(143):deviceFamilyIsPARISC(144):deviceFamilyIsPARISC8500(145):deviceFamilyIsPARISC8000(146):deviceFamilyIsPARISC7300LC(147):deviceFamilyIsPARISC7200(148):deviceFamilyIsPARISC7100LC(149):deviceFamilyIsPARISC7100(150):deviceFamilyIsV30(160):deviceFamilyIsQuadCoreIntelXeon3200(161):deviceFamilyIsDualCoreIntelXeon3000(162):deviceFamilyIsQuadCoreIntelXeon5300(163):deviceFamilyIsDualCoreIntelXeon5100(164):deviceFamilyIsDualCoreIntelXeon5000(165):deviceFamilyIsDualCoreIntelXeonLV(166):deviceFamilyIsDualCoreIntelXeonULV(167):deviceFamilyIsDualCoreIntelXeon7100(168):deviceFamilyIsQuadCoreIntelXeon5400(169):deviceFamilyIsQuadCoreIntelXeon(170):deviceFamilyIsDualCoreIntelXeon5200(171):deviceFamilyIsDualCoreIntelXeon7200(172):deviceFamilyIsQuadCoreIntelXeon7300(173):deviceFamilyIsQuadCoreIntelXeon7400(174):deviceFamilyIsMultiCoreIntelXeon7400(175):deviceFamilyIsM1(176):deviceFamilyIsM2(177):deviceFamilyIsIntelPentium4HT(179):deviceFamilyIsAS400(180):deviceFamilyIsAMDAthlonXP(182):deviceFamilyIsAMDAthlonMP(183):deviceFamilyIsAMDDuron(184):deviceFamilyIsIntelPentiumM(185):deviceFamilyIsIntelCeleronD(186):deviceFamilyIsIntelPentiumD(187):deviceFamilyIsIntelPentiumExtreme(188):deviceFamilyIsIntelCoreSolo(189):deviceFamilyIsIntelCore2(190):deviceFamilyIsIntelCore2Duo(191):deviceFamilyIsIntelCore2Solo(192):deviceFamilyIsIntelCore2Extreme(193):deviceFamilyIsIntelCore2Quad(194):deviceFamilyIsIntelCore2ExtremeMobile(195):deviceFamilyIsIntelCore2DuoMobile(196):deviceFamilyIsIntelCore2SoloMobile(197):deviceFamilyIsIntelCorei7(198):deviceFamilyIsDualCoreIntelCeleron(199):deviceFamilyIsIBM390(200):deviceFamilyIsG4(201):deviceFamilyIsG5(202):deviceFamilyIsESA390G6(203):deviceFamilyIszArchitectur(204):deviceFamilyIsIntelCorei5(205):deviceFamilyIsIntelCorei3(206):deviceFamilyIsVIAC7M(210):deviceFamilyIsVIAC7D(211):deviceFamilyIsVIAC7(212):deviceFamilyIsVIAEden(213):deviceFamilyIsMultiCoreIntelXeon(214):deviceFamilyIsDualCoreIntelXeon3xxx(215):deviceFamilyIsQuadCoreIntelXeon3xxx(216):deviceFamilyIsVIANano(217):deviceFamilyIsDualCoreIntelXeon5xxx(218):deviceFamilyIsQuadCoreIntelXeon5xxx(219):deviceFamilyIsDualCoreIntelXeon7xxx(221):deviceFamilyIsQuadCoreIntelXeon7xxx(222):deviceFamilyIsMultiCoreIntelXeon7xxx(223):deviceFamilyIsMultiCoreIntelXeon3400(224):deviceFamilyIsEmbeddedAMDOpertonQuadCore(230):deviceFamilyIsAMDPhenomTripleCore(231):deviceFamilyIsAMDTurionUltraDualCoreMobile(232):deviceFamilyIsAMDTurionDualCoreMobile(233):deviceFamilyIsAMDAthlonDualCore(234):deviceFamilyIsAMDSempronSI(235):deviceFamilyIsAMDPhenomII(236):deviceFamilyIsAMDAthlonII(237):deviceFamilyIsSixCoreAMDOpteron(238):deviceFamilyIsAMDSempronM(239):deviceFamilyIsi860(250):deviceFamilyIsi960(251),1100.0030.0001.0010 This attribute defines the family of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.11,IDRAC-MIB::processorDeviceMaximumSpeed,INTEGER,read-only,,mandatory,,1100.0030.0001.0011 This attribute defines the maximum speed of the processor device in MHz. Zero indicates the maximum speed is unknown.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.12,IDRAC-MIB::processorDeviceCurrentSpeed,INTEGER,read-only,,mandatory,,1100.0030.0001.0012 This attribute defines the current speed of the processor device in MHz. Zero indicates the current speed is unknown.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.13,IDRAC-MIB::processorDeviceExternalClockSpeed,INTEGER,read-only,,mandatory,,1100.0030.0001.0013 This attribute defines the speed of the external clock for the processor device in MHz. Zero indicates the external clock speed is unknown.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.14,IDRAC-MIB::processorDeviceVoltage,INTEGER,read-only,,mandatory,,1100.0030.0001.0014 This attribute defines the voltage powering the processor device in millivolts. Zero indicates the voltage is unknown.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.16,IDRAC-MIB::processorDeviceVersionName,OCTET,read-only,,mandatory,,1100.0030.0001.0016 This attribute defines the version of the processor device. On some systems, this value contains the brand and stepping information; on other systems, this value contains the model and stepping information.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.17,IDRAC-MIB::processorDeviceCoreCount,INTEGER,read-only,,mandatory,,1100.0030.0001.0017 This attribute defines the number of processor cores detected for the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.18,IDRAC-MIB::processorDeviceCoreEnabledCount,INTEGER,read-only,,mandatory,,1100.0030.0001.0018 This attribute defines the number of processor cores enabled for the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.19,IDRAC-MIB::processorDeviceThreadCount,INTEGER,read-only,,mandatory,,1100.0030.0001.0019 This attribute defines the number of processor threads detected for the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.20,IDRAC-MIB::processorDeviceCharacteristics,INTEGER,read-only,,mandatory,,1100.0030.0001.0020 This attribute defines characteristics of the processor device. This attribute is a bit field where a bit has the meaning defined below when set to 1 (one). NOTE: Bits 2-15 need to be examined in the context of bit 1. If bit 1 is set, the processor charactistics are unknown and bits 2-15 cannot be used to determine if the functions associated with the bits are supported. Bit Position Meaning if Set -------- -------------- Bit 0 Reserved Bit 1 Unknown Bit 2 64-bit capable Bit 3-15 Reserved
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.21,IDRAC-MIB::processorDeviceExtendedCapabilities,INTEGER,read-only,,mandatory,,1100.0030.0001.0021 This attribute defines extended capabilities of the processor device. This attribute is a bit field where a bit has the meaning defined below when set to 1 (one). Bit Position Meaning if Set -------- -------------- Bit 0 Virtualization Technology (VT) supported Bit 2 eXecute Disable (XD) supported Bit 3 Hyper-Threading (HT) supported Bit 4 Turbo Mode supported
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.22,IDRAC-MIB::processorDeviceExtendedSettings,INTEGER,read-only,,mandatory,,1100.0030.0001.0022 This attribute defines extended settings of the processor device. This attribute is a bit field where a bit has the meaning defined below when set to 1 (one). Bit Position Meaning if Set -------- -------------- Bit 0 Virtualization Technology (VT) enabled Bit 2 eXecute Disable (XD) enabled Bit 3 Hyper-Threading (HT) enabled Bit 4 Turbo Mode enabled
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.23,IDRAC-MIB::processorDeviceBrandName,OCTET,read-only,,mandatory,,1100.0030.0001.0023 This attribute defines the brand of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.30.1.26,IDRAC-MIB::processorDeviceFQDD,OCTET,read-only,,mandatory,,1100.0030.0001.0026 Fully qualified device descriptor (FQDD) of the processor device.
.1.3.6.1.4.1.674.10892.5.4.1100.32,IDRAC-MIB::processorDeviceStatusTable,,not-accessible,,mandatory,,1100.0032 This object defines the Processor Device Status Table.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1,IDRAC-MIB::processorDeviceStatusTableEntry,,not-accessible,processorDeviceStatusChassisIndex:processorDeviceStatusIndex,mandatory,,1100.0032.0001 This object defines the Processor Device Status Table Entry.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1.1,IDRAC-MIB::processorDeviceStatusChassisIndex,INTEGER,read-only,,mandatory,,1100.0032.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1.2,IDRAC-MIB::processorDeviceStatusIndex,INTEGER,read-only,,mandatory,,1100.0032.0001.0002 This attribute defines the index (one based) of the processor device status probe.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1.3,IDRAC-MIB::processorDeviceStatusStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0032.0001.0003 This attribute defines the state capabilities of the processor device status probe.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1.4,IDRAC-MIB::processorDeviceStatusStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0032.0001.0004 This attribute defines the state settings of the processor device status probe.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1.5,IDRAC-MIB::processorDeviceStatusStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1100.0032.0001.0005 This attribute defines the status of the processor device status probe. This status will be joined into the processorDeviceStatus attribute.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1.6,IDRAC-MIB::processorDeviceStatusReading,INTEGER,read-only,,mandatory,internalError(1):thermalTrip(2):configurationError(32):processorPresent(128):processorDisabled(256):terminatorPresent(512):processorThrottled(1024),1100.0032.0001.0006 This attribute defines the reading of the processor device status probe.
.1.3.6.1.4.1.674.10892.5.4.1100.32.1.7,IDRAC-MIB::processorDeviceStatusLocationName,OCTET,read-only,,mandatory,,1100.0032.0001.0007 This attribute defines the location name of the processor device status probe.
.1.3.6.1.4.1.674.10892.5.4.1100.50,IDRAC-MIB::memoryDeviceTable,,not-accessible,,mandatory,,1100.0050 This object defines the Memory Device Table.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1,IDRAC-MIB::memoryDeviceTableEntry,,not-accessible,memoryDevicechassisIndex:memoryDeviceIndex,mandatory,,1100.0050.0001 This object defines the Memory Device Table Entry.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.1,IDRAC-MIB::memoryDevicechassisIndex,INTEGER,read-only,,mandatory,,1100.0050.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.2,IDRAC-MIB::memoryDeviceIndex,INTEGER,read-only,,mandatory,,1100.0050.0001.0002 This attribute defines the index (one based) of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.3,IDRAC-MIB::memoryDeviceStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0050.0001.0003 This attribute defines the state capabilities of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.4,IDRAC-MIB::memoryDeviceStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0050.0001.0004 This attribute defines the state settings of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.5,IDRAC-MIB::memoryDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1100.0050.0001.0005 This attribute defines the status of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.7,IDRAC-MIB::memoryDeviceType,INTEGER,read-only,,mandatory,deviceTypeIsOther(1):deviceTypeIsUnknown(2):deviceTypeIsDRAM(3):deviceTypeIsEDRAM(4):deviceTypeIsVRAM(5):deviceTypeIsSRAM(6):deviceTypeIsRAM(7):deviceTypeIsROM(8):deviceTypeIsFLASH(9):deviceTypeIsEEPROM(10):deviceTypeIsFEPROM(11):deviceTypeIsEPROM(12):deviceTypeIsCDRAM(13):deviceTypeIs3DRAM(14):deviceTypeIsSDRAM(15):deviceTypeIsSGRAM(16):deviceTypeIsRDRAM(17):deviceTypeIsDDR(18):deviceTypeIsDDR2(19):deviceTypeIsDDR2FBDIMM(20):deviceTypeIsDDR3(24):deviceTypeIsFBD2(25):deviceTypeIsDDR4(26),1100.0050.0001.0007 This attribute defines the type of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.8,IDRAC-MIB::memoryDeviceLocationName,OCTET,read-only,,mandatory,,1100.0050.0001.0008 This attribute defines the location of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.10,IDRAC-MIB::memoryDeviceBankLocationName,OCTET,read-only,,mandatory,,1100.0050.0001.0010 This attribute defines the location of the bank for the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.14,IDRAC-MIB::memoryDeviceSize,INTEGER,read-only,,mandatory,,1100.0050.0001.0014 This attribute defines the size in KBytes of the memory device. Zero indicates no memory installed; 2,147,483,647 indicates an unknown memory size.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.15,IDRAC-MIB::memoryDeviceSpeed,INTEGER,read-only,,mandatory,,1100.0050.0001.0015 This attribute defines the maximum capable speed in megahertz (MHz) of the memory device. Zero indicates an unknown speed.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.21,IDRAC-MIB::memoryDeviceManufacturerName,OCTET,read-only,,mandatory,,1100.0050.0001.0021 This attribute defines the manufacturer of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.22,IDRAC-MIB::memoryDevicePartNumberName,OCTET,read-only,,mandatory,,1100.0050.0001.0022 This attribute defines the manufacturer's part number for the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.23,IDRAC-MIB::memoryDeviceSerialNumberName,OCTET,read-only,,mandatory,,1100.0050.0001.0023 This attribute defines the serial number of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.26,IDRAC-MIB::memoryDeviceFQDD,OCTET,read-only,,mandatory,,1100.0050.0001.0026 Fully qualified device descriptor (FQDD) of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.27,IDRAC-MIB::memoryDeviceCurrentOperatingSpeed,INTEGER,read-only,,mandatory,,1100.0050.0001.0027 This attribute defines the current operating speed in megahertz (MHz) of the memory device. Zero indicates an unknown speed.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.28,IDRAC-MIB::memoryDeviceTechnology,INTEGER,read-only,,mandatory,other(1):unknown(2):dram(3):nvdimm-n(4):nvdimm-f(5):nvdimm-p(6):intelpersistentmemory(7),1100.0050.0001.0028 This attribute defines the type or technology of the memory device.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.29,IDRAC-MIB::memoryDeviceVolatileSize,INTEGER,read-only,,mandatory,,1100.0050.0001.0029 This attribute defines the volatile size of the memory device in MBs.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.30,IDRAC-MIB::memoryDeviceNonVolatilesSize,INTEGER,read-only,,mandatory,,1100.0050.0001.0030 This attribute defines the Non Volatile size of the memory device in MBs.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.31,IDRAC-MIB::memoryDeviceCacheSize,INTEGER,read-only,,mandatory,,1100.0050.0001.0031 This attribute defines the Cache size of the memory device in MBs.
.1.3.6.1.4.1.674.10892.5.4.1100.50.1.32,IDRAC-MIB::memoryDeviceRemainingRatedWriteEndurance,INTEGER,read-only,,mandatory,notApplicable(255),1100.0050.0001.0032 This attribute defines the percent of remaining life for the memory device
.1.3.6.1.4.1.674.10892.5.4.1100.80,IDRAC-MIB::pCIDeviceTable,,not-accessible,,mandatory,,1100.0080 This object defines the PCI Device Table.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1,IDRAC-MIB::pCIDeviceTableEntry,,not-accessible,pCIDevicechassisIndex:pCIDeviceIndex,mandatory,,1100.0080.0001 This object defines the PCI Device Table Entry.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.1,IDRAC-MIB::pCIDevicechassisIndex,INTEGER,read-only,,mandatory,,1100.0080.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.2,IDRAC-MIB::pCIDeviceIndex,INTEGER,read-only,,mandatory,,1100.0080.0001.0002 This attribute defines the index (one based) of the PCI device.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.3,IDRAC-MIB::pCIDeviceStateCapabilities,INTEGER,read-only,,mandatory,unknownCapabilities(1):enableCapable(2):notReadyCapable(4):enableAndNotReadyCapable(6),1100.0080.0001.0003 This attribute defines the state capabilities of the PCI device.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.4,IDRAC-MIB::pCIDeviceStateSettings,INTEGER,read-only,,mandatory,unknown(1):enabled(2):notReady(4):enabledAndNotReady(6),1100.0080.0001.0004 This attribute defines the state settings of the PCI device.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.5,IDRAC-MIB::pCIDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1100.0080.0001.0005 This attribute defines the status of the PCI device.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.7,IDRAC-MIB::pCIDeviceDataBusWidth,INTEGER,read-only,,mandatory,,1100.0080.0001.0007 This attribute defines the width of the data bus of the PCI device. This attribute contains an enumeration value. The possible values and their meanings are defined below. Value Meaning ---------- -------------- 0x00000001 Other 0x00000002 Unknown 0x00000003 8 bit 0x00000004 16 bit 0x00000005 32 bit 0x00000006 64 bit 0x00000007 128 bit 0x00000008 1x or x1 0x00000009 2x or x2 0x0000000A 4x or x4 0x0000000B 8x or x8 0x0000000C 12x or x12 0x0000000D 16x or x16 0x0000000E 32x or x32
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.8,IDRAC-MIB::pCIDeviceManufacturerName,OCTET,read-only,,mandatory,,1100.0080.0001.0008 This attribute defines the name of the manufacturer of the PCI device.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.9,IDRAC-MIB::pCIDeviceDescriptionName,OCTET,read-only,,mandatory,,1100.0080.0001.0009 This attribute defines the description of the PCI device.
.1.3.6.1.4.1.674.10892.5.4.1100.80.1.12,IDRAC-MIB::pCIDeviceFQDD,OCTET,read-only,,mandatory,,1100.0080.0001.0012 Fully qualified device descriptor (FQDD) of the PCI device.
.1.3.6.1.4.1.674.10892.5.4.1100.90,IDRAC-MIB::networkDeviceTable,,not-accessible,,mandatory,,1100.0090 This object defines the Network Device Table.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1,IDRAC-MIB::networkDeviceTableEntry,,not-accessible,networkDeviceChassisIndex:networkDeviceIndex,mandatory,,1100.0090.0001 This object defines the Network Device Table Entry.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.1,IDRAC-MIB::networkDeviceChassisIndex,INTEGER,read-only,,mandatory,,1100.0090.0001.0001 This attribute defines the index (one based) of the system chassis that contains the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.2,IDRAC-MIB::networkDeviceIndex,INTEGER,read-only,,mandatory,,1100.0090.0001.0002 This attribute defines the index (one based) of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.3,IDRAC-MIB::networkDeviceStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1100.0090.0001.0003 This attribute defines the status of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.4,IDRAC-MIB::networkDeviceConnectionStatus,INTEGER,read-only,,mandatory,connected(1):disconnected(2):driverBad(3):driverDisabled(4):hardwareInitalizing(10):hardwareResetting(11):hardwareClosing(12):hardwareNotReady(13),1100.0090.0001.0004 This attribute defines the connection status of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.6,IDRAC-MIB::networkDeviceProductName,OCTET,read-only,,mandatory,,1100.0090.0001.0006 This attribute defines the product name of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.7,IDRAC-MIB::networkDeviceVendorName,OCTET,read-only,,mandatory,,1100.0090.0001.0007 This attribute defines the name of the vendor of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.15,IDRAC-MIB::networkDeviceCurrentMACAddress,OCTET,read-only,,mandatory,,1100.0090.0001.0015 This attribute defines the current MAC address of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.16,IDRAC-MIB::networkDevicePermanentMACAddress,OCTET,read-only,,mandatory,,1100.0090.0001.0016 This attribute defines the permanent MAC address of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.17,IDRAC-MIB::networkDevicePCIBusNumber,INTEGER,read-only,,mandatory,,1100.0090.0001.0017 This attribute defines the PCI bus number of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.18,IDRAC-MIB::networkDevicePCIDeviceNumber,INTEGER,read-only,,mandatory,,1100.0090.0001.0018 This attribute defines the PCI device number of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.19,IDRAC-MIB::networkDevicePCIFunctionNumber,INTEGER,read-only,,mandatory,,1100.0090.0001.0019 This attribute defines the PCI function number of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.23,IDRAC-MIB::networkDeviceTOECapabilityFlags,INTEGER,read-only,,mandatory,unknown(1):available(2):notAvailable(4):cannotBeDetermined(8):driverNotResponding(16),1100.0090.0001.0023 This attribute defines the TCP/IP Offload Engine (TOE) capability flags of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.27,IDRAC-MIB::networkDeviceiSCSICapabilityFlags,INTEGER,read-only,,mandatory,unknown(1):available(2):notAvailable(4):cannotBeDetermined(8):driverNotResponding(16),1100.0090.0001.0027 This attribute defines the Internet Small Computer System Interface (iSCSI) capability flags of the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.28,IDRAC-MIB::networkDeviceiSCSIEnabled,INTEGER,read-only,,mandatory,,1100.0090.0001.0028 This attribute defines if iSCSI is enabled for the network device.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.29,IDRAC-MIB::networkDeviceCapabilities,INTEGER,read-only,,mandatory,supported(1):toe(2):iscsiOffload(4):fcoeOffload(8),1100.0090.0001.0029 This attribute defines the capabilities of the network device. If this value is notSupported(0), the networkDeviceTOECapabilityFlags, networkDeviceiSCSICapabilityFlags and networkDeviceiSCSIEnabled attributes should be used to determine the network device capabilities. If the supported(1) bit is on, this attribute should be used to determine the network device capabilities, and the attributes mentioned above should not be used. NOTE: For a network device on Converged Network Adapter (CNA), this attribute provides capability information for the CNA and not for the network device. For more information read vendor documentation.
.1.3.6.1.4.1.674.10892.5.4.1100.90.1.30,IDRAC-MIB::networkDeviceFQDD,OCTET,read-only,,mandatory,,1100.0090.0001.0030 Fully qualified device descriptor (FQDD) of the network device.
.1.3.6.1.4.1.674.10892.5.4.1200,IDRAC-MIB::slotGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.1200.10,IDRAC-MIB::systemSlotTable,,not-accessible,,mandatory,,1200.0010 This object defines the System Slot Table.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1,IDRAC-MIB::systemSlotTableEntry,,not-accessible,systemSlotchassisIndex:systemSlotIndex,mandatory,,1200.0010.0001 This object defines the System Slot Table Entry.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.1,IDRAC-MIB::systemSlotchassisIndex,INTEGER,read-only,,mandatory,,1200.0010.0001.0001 This attribute defines the index (one based) of the associated system chassis.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.2,IDRAC-MIB::systemSlotIndex,INTEGER,read-only,,mandatory,,1200.0010.0001.0002 This attribute defines the index (one based) of the system slot.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.3,IDRAC-MIB::systemSlotStateCapabilitiesUnique,INTEGER,read-only,,mandatory,systemSlotHotPlugIsUnknown(1):systemSlotHotPlugIsHotPluggableCapable(2):systemSlotHotPlugCanBePoweredOn(4):systemSlotHotPlugCanSignalAttention(8):systemSlotHotPlugCanSignalPowerFault(16):systemSlotHotPlugCanSignalAdapterPresent(32):systemSlotHotPlugCanSignalPowerButtonPressed(64):canSupportAllHotPlugCapabilities(126):systemSlotCanProvide5Volts(128):systemSlotCanProvide3Point3Volts(256):systemSlotCanSignalIfShared(512):systemSlotCanSupportCard16(1024):systemSlotCanSupportCardBus(2048):systemSlotCanSupportZoomVideo(4096):systemSlotCanSupportModemRingResume(8192):systemSlotCanSupportPMESignal(16384):canSupportAllSlotCapabilities(32640):canSupportAllSlotAndAllHotPlugCapabilities(32766),1200.0010.0001.0003 This attribute defines the state capabilities of the system slot.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.4,IDRAC-MIB::systemSlotStateSettingsUnique,INTEGER,read-only,,mandatory,systemSlotHotPlugIsUnknown(1):systemSlotHotPlugIsHotPluggable(2):systemSlotHotPlugIsPoweredOn(4):systemSlotHotPlugIsAtAttention(8):systemSlotHotPlugHasPowerFaulted(16):systemSlotHotPlugAdapterIsPresent(32):systemSlotHotPlugAdapterPresentAndPoweredOn(36):systemSlotHotPlugPowerButtonPressed(64):systemSlotProvides5Volts(128):systemSlotProvides3Point3Volts(256):systemSlotIsShared(512):systemSlotSupportsCard16(1024):systemSlotSupportsCardBus(2048):systemSlotSupportsZoomVideo(4096):systemSlotSupportsModemRingResume(8192):systemSlotSupportsPMESignal(16384):supportsPMEand3P3Vand5VandHotPluggable(16770):supportsPMEand3P3Vand5VhasAdapterOn(16804):supportsPMEand3P3Vand5VhasAdapterOnandisHotPluggable(16806):supportsPMEand3P3VIsSharedand5VhasAdapterOnandHotPlugable(17316),1200.0010.0001.0004 This attribute defines the state settings of the system slot.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.5,IDRAC-MIB::systemSlotStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),1200.0010.0001.0005 This attribute defines the status of the system slot.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.6,IDRAC-MIB::systemSlotCurrentUsage,INTEGER,read-only,,mandatory,systemSlotUsageIsOther(1):systemSlotUsageIsUnknown(2):systemSlotUsageIsAvailable(3):systemSlotUsageIsInUse(4),1200.0010.0001.0006 This attribute defines the current usage of the system slot.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.7,IDRAC-MIB::systemSlotType,INTEGER,read-only,,mandatory,systemSlotIsOther(1):systemSlotIsUnknown(2):systemSlotIsISA(3):systemSlotIsMCA(4):systemSlotIsEISA(5):systemSlotIsPCI(6):systemSlotIsPCMCIA(7):systemSlotIsVLVESA(8):systemSlotIsProprietary(9):systemSlotIsProcessorCard(10):systemSlotIsProprietaryMemory(11):systemSlotIsIORiserCard(12):systemSlotIsNuBUS(13):systemSlotIsPCI66MHz(14):systemSlotIsAGP(15):systemSlotIsAGP2X(16):systemSlotIsAGP4X(17):systemSlotIsPC98C20(18):systemSlotIsPC98C24(19):systemSlotIsPC98E(20):systemSlotIsPC98LocalBus(21):systemSlotIsPC98Card(22):systemSlotIsPCIX(23):systemSlotIsPCIExpress(24):systemSlotIsAGP8X(25):systemSlotIsPCIExpressX1(166):systemSlotIsPCIExpressX2(167):systemSlotIsPCIExpressX4(168):systemSlotIsPCIExpressX8(169):systemSlotIsPCIExpressX16(170):systemSlotIsPCIExpressGen2(171):systemSlotIsPCIExpressGen2X1(172):systemSlotIsPCIExpressGen2X2(173):systemSlotIsPCIExpressGen2X4(174):systemSlotIsPCIExpressGen2X8(175):systemSlotIsPCIExpressGen2X16(176),1200.0010.0001.0007 This attribute defines the type of the system slot.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.8,IDRAC-MIB::systemSlotSlotExternalSlotName,OCTET,read-only,,mandatory,,1200.0010.0001.0008 This attribute defines the name of the external connector name of the system slot.
.1.3.6.1.4.1.674.10892.5.4.1200.10.1.11,IDRAC-MIB::systemSlotCategory,INTEGER,read-only,,mandatory,systemSlotCategoryIsOther(1):systemSlotCategoryIsUnknown(2):systemSlotCategoryIsBusConnector(3):systemSlotCategoryIsPCMCIA(4):systemSlotCategoryIsMotherboard(5),1200.0010.0001.0011 This attribute defines the category of the system slot.
.1.3.6.1.4.1.674.10892.5.4.2000,IDRAC-MIB::fruGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.4.2000.10,IDRAC-MIB::fruTable,,not-accessible,,mandatory,,2000.0010 This object defines the Field Replaceable Unit table.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1,IDRAC-MIB::fruTableEntry,,not-accessible,fruChassisIndex:fruIndex,mandatory,,2000.0010.0001 This object defines the Field Replaceable Unit table entry.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.1,IDRAC-MIB::fruChassisIndex,INTEGER,read-only,,mandatory,,2000.0010.0001.0001 This attribute defines the index (one based) of the system chassis containing the field replaceable unit.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.2,IDRAC-MIB::fruIndex,INTEGER,read-only,,mandatory,,2000.0010.0001.0002 This attribute defines the index (one based) of the field replaceable unit.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.3,IDRAC-MIB::fruInformationStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),2000.0010.0001.0003 This attribute defines the status of the field replaceable unit information.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.6,IDRAC-MIB::fruManufacturerName,OCTET,read-only,,mandatory,,2000.0010.0001.0006 This attribute defines the manufacturer of the field replaceable unit.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.7,IDRAC-MIB::fruSerialNumberName,OCTET,read-only,,mandatory,,2000.0010.0001.0007 This attribute defines the serial number of the field replaceable unit.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.8,IDRAC-MIB::fruPartNumberName,OCTET,read-only,,mandatory,,2000.0010.0001.0008 This attribute defines the part number of the field replaceable unit.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.9,IDRAC-MIB::fruRevisionName,OCTET,read-only,,mandatory,,2000.0010.0001.0009 This attribute defines the revision of the field replaceable unit.
.1.3.6.1.4.1.674.10892.5.4.2000.10.1.12,IDRAC-MIB::fruFQDD,OCTET,read-only,,mandatory,,2000.0010.0001.0012 Fully qualified device descriptor (FQDD) of the field replaceable unit.
.1.3.6.1.4.1.674.10892.5.5,IDRAC-MIB::storageDetailsGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.5.1,IDRAC-MIB::software,,,,,,
.1.3.6.1.4.1.674.10892.5.5.1.20,IDRAC-MIB::storageManagement,,,,,,
.1.3.6.1.4.1.674.10892.5.5.1.20.130,IDRAC-MIB::physicalDevices,,,,,,
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1,IDRAC-MIB::controllerTable,,not-accessible,,mandatory,,A table of managed RAID controllers. The number of entries is related to number of RAID controllers discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1,IDRAC-MIB::controllerTableEntry,,not-accessible,controllerNumber,mandatory,,An entry in the table of RAID controllers. A row in this table  cannot be created or deleted by SNMP operations on columns of  the table.
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.1,IDRAC-MIB::controllerNumber,INTEGER,read-only,,mandatory,,Instance number of this controller entry.
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.2,IDRAC-MIB::controllerName,OCTET,read-only,,mandatory,,The controller's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.7,IDRAC-MIB::controllerRebuildRate,INTEGER,read-only,,mandatory,,The rebuild rate is the percentage of the controller's  resources dedicated to rebuilding a failed disk when a rebuild  is necessary. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.8,IDRAC-MIB::controllerFWVersion,OCTET,read-only,,mandatory,,The controller's current firmware version. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.9,IDRAC-MIB::controllerCacheSizeInMB,INTEGER,read-only,,mandatory,,The controller's current amount of cache memory in megabytes.  
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.37,IDRAC-MIB::controllerRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the controller state.  This is the combined status of the controller and its components. Possible values: 1: Other. 2: Unknown. 3: OK  4: Non-critical  5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.38,IDRAC-MIB::controllerComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the controller itself without the  propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK  4: Non-critical  5: Critical 6: Non-recoverable
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.41,IDRAC-MIB::controllerDriverVersion,OCTET,read-only,,mandatory,,Currently installed driver version for this controller on the host. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.42,IDRAC-MIB::controllerPCISlot,OCTET,read-only,,mandatory,,The PCI slot on the server where the controller is seated. This  data is not reported for embedded or integrated controllers,  
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.48,IDRAC-MIB::controllerReconstructRate,INTEGER,read-only,,mandatory,,The reconstruct rate is the percentage of the controller's resources  dedicated to reconstructing a disk group after adding a physical disk  or changing the RAID level of a virtual disk residing on the disk  group. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.49,IDRAC-MIB::controllerPatrolReadRate,INTEGER,read-only,,mandatory,,The patrol read rate is the percentage of the controller's  resources dedicated to perform a patrol read on disks participating in a virtual disk or hot spares. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.50,IDRAC-MIB::controllerBGIRate,INTEGER,read-only,,mandatory,,The background initialization (BGI) rate is the percentage of the  controller's resources dedicated to performing the background  initialization of a redundant virtual disk after it is created. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.51,IDRAC-MIB::controllerCheckConsistencyRate,INTEGER,read-only,,mandatory,,The check consistency rate is the percentage of the  controller's resources dedicated to performing a check consistency  on a redundant virtual disk. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.52,IDRAC-MIB::controllerPatrolReadMode,INTEGER,read-only,,mandatory,other(1):notSupported(2):disabled(3):auto(4):manual(5),Identifies the patrol read mode setting for the controller. Possible values: 1: Not one of the following or could not be determined. 2: Not Supported on this controller.  3: Disabled. 4: Automatic. 5: Manual. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.53,IDRAC-MIB::controllerPatrolReadState,INTEGER,read-only,,mandatory,other(1):stopped(2):active(3),This property displays the current state of the patrol read process. Possible values: 1: Not one of the following or could not be determined. 2: Patrol read is not running. 3: Patrol read is running. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.59,IDRAC-MIB::controllerPersistentHotSpare,INTEGER,read-only,,mandatory,,Indicates whether hot spare drives would be restored on insertion  into the same slot. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.60,IDRAC-MIB::controllerSpinDownUnconfiguredDrives,INTEGER,read-only,,mandatory,,Indicates whether un-configured drives would be put in power save mode by the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.61,IDRAC-MIB::controllerSpinDownHotSpareDrives,INTEGER,read-only,,mandatory,,Indicates whether hot spare drives would be put in power save mode by the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.62,IDRAC-MIB::controllerSpinDownTimeInterval,INTEGER,read-only,,mandatory,,The duration in minutes after which, the unconfigured or hot  spare drives will be spun down to power save mode. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.69,IDRAC-MIB::controllerPreservedCache,INTEGER,read-only,,mandatory,,Indicates whether preserved cache or pinned cache is  present on the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.70,IDRAC-MIB::controllerCheckConsistencyMode,INTEGER,read-only,,mandatory,other(1):unsupported(2):normal(3):stopOnError(4),The current check consistency mode setting  for the controller. Possible values: 1: Not one of the following. 2: Not supported on this controller. 3: Normal check consistency operation. 4: Check consistency operation will stop on encountering  an error. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.71,IDRAC-MIB::controllerCopyBackMode,INTEGER,read-only,,mandatory,other(1):unsupported(2):on(3):onWithSmart(4):off(5),The current copy back mode setting  for the controller. Possible values: 1: Not one of the following. 2: Not supported on this controller. 3: Disks assigned as spares could revert back to spare status. 4: Data from physical disk participating in a  virtual disk could be automatically copied to the assigned  hot spare in case former has a predictive failure event.  5: Copyback mode is disabled.  
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.72,IDRAC-MIB::controllerSecurityStatus,INTEGER,read-only,,mandatory,unknown(1):none(2):lkm(3),The controller's current security/encryption status.. Possible values: 1: The current status could not be determined. 2: Controller is not operating in an encryption mode. 3: Controller is operating in the Local Key Management (LKM) encryption mode. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.73,IDRAC-MIB::controllerEncryptionKeyPresent,INTEGER,read-only,,mandatory,,Indicates whether encryption key is assigned for the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.74,IDRAC-MIB::controllerEncryptionCapability,INTEGER,read-only,,mandatory,other(1):none(2):lkm(3),The type of encryption supported by the controller. Possible values: 1: Not one of the following. 2: No encryption supported,  3: Local Key Management, 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.75,IDRAC-MIB::controllerLoadBalanceSetting,INTEGER,read-only,,mandatory,other(1):unsupported(2):auto(3):none(4),The ability of the controller to automatically use both  controller ports (or connectors) connected to the same enclosure in  order to route I/O requests. Possible values: 1: Not one of the following. 2: Not supported. 3: Automatic load balancing is active. 4: Load balancing is inactive. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.76,IDRAC-MIB::controllerMaxCapSpeed,INTEGER,read-only,,mandatory,unknown(1):oneDotFiveGbps(2):threeGbps(3):sixGbps(4):twelveGbps(5),The maximum speed of the controller.in  Gigbits per second (Gbps). Possible values: 1: The speed could not be determined. 2. 1.5 Gbps 3: 3.0 Gbps 4: 6.0 Gbps 5: 12.0 Gbps 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.77,IDRAC-MIB::controllerSASAddress,OCTET,read-only,,mandatory,,The SAS address of the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.78,IDRAC-MIB::controllerFQDD,OCTET,read-only,,mandatory,,The controller's Fully Qualified Device Descriptor (FQDD) as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.79,IDRAC-MIB::controllerDisplayName,OCTET,read-only,,mandatory,,The controller's friendly FQDD as represented in Storage  Management.
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.80,IDRAC-MIB::controllerT10PICapability,INTEGER,read-only,,mandatory,other(1):capable(2):notCapable(3),Indicates whether the controller supports the T10 PI (Protection  Information). These protection fields are known as DIF (Data Integrity Fields). Possible values: 1: Not one of the following. 2: Capable of supporting T10 PI. 3: Not capable of supporting T10 PI. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.81,IDRAC-MIB::controllerRAID10UnevenSpansSupported,INTEGER,read-only,,mandatory,,Indicates whether uneven spans for RAID 10 virtual disk  is supported on the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.82,IDRAC-MIB::controllerEnhancedAutoImportForeignConfigMode,INTEGER,read-only,,mandatory,other(1):notSupported(2):disabled(3):enabled(4),Indicates the status of enhanced auto-import of foreign  configuration property of the controller. 1: Not one of the following. 2: Not Supported. 3: Disabled. 4: Enabled. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.83,IDRAC-MIB::controllerBootModeSupported,INTEGER,read-only,,mandatory,,Indicates whether headless boot mode settings are supported  on the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.84,IDRAC-MIB::controllerBootMode,INTEGER,read-only,,mandatory,notApplicable(1):user(2):contOnError(3):headlessContOnError(4):headlessSafe(5),Indicates the boot mode of the controller. Possible values: 1: Not applicable for this controller. 2: User mode: User interaction required for all boot messages (not  applicable for uEFI environments). 3: Continue Boot On Error. User interaction only required for  critical messages. 4: Headless Mode Continue On Error. User interaction is not required. Controller boot may halt on Error. 5: Headless Safe Mode. Controller shall boot to safe mode on critical errors. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3,IDRAC-MIB::enclosureTable,,not-accessible,,mandatory,,A table of managed enclosures/backplanes. The number of entries is  related to number of internal backplane(s) discovered in the system  and external storage enclosure(s) attached to the system.. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1,IDRAC-MIB::enclosureTableEntry,,not-accessible,enclosureNumber,mandatory,,An entry in the enclosure table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.1,IDRAC-MIB::enclosureNumber,INTEGER,read-only,,mandatory,,Instance number of this enclossre/backplane. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.2,IDRAC-MIB::enclosureName,OCTET,read-only,,mandatory,,The enclosure/backplane's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.4,IDRAC-MIB::enclosureState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this enclosure/backplane. Possible states: 1: The current state could not be determined. 2: The enclosure is operating normally. 3: The enclosure has encountered a hardware problem or is not  responding. 4: The enclosure is no longer connected to the controller or  there exists a problem communicating to the enclosure. 5: The enclosure is unstable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.8,IDRAC-MIB::enclosureServiceTag,OCTET,read-only,,mandatory,,Enclosure identification used when consulting customer support. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.9,IDRAC-MIB::enclosureAssetTag,OCTET,read-only,,mandatory,,The asset tag information for the enclosure.
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.19,IDRAC-MIB::enclosureConnectedPort,OCTET,read-only,,mandatory,,The port on the controller to which the  storage enclosure is connected. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.23,IDRAC-MIB::enclosureRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the enclosure/backplane state. This is the combined status of the enclosure and its sub-components. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical. 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.24,IDRAC-MIB::enclosureComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure/backplane.itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.26,IDRAC-MIB::enclosureFirmwareVersion,OCTET,read-only,,mandatory,,The firmware information for the enclosure/backplane. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.30,IDRAC-MIB::enclosureSASAddress,OCTET,read-only,,mandatory,,The SAS address of the enclosure/backplane. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.31,IDRAC-MIB::enclosureDriveCount,INTEGER,read-only,,mandatory,,The number of disks present in the enclosure/backplane. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.32,IDRAC-MIB::enclosureTotalSlots,INTEGER,read-only,,mandatory,,The total physical drive slots in a storage enclosure  or server backplane. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.40,IDRAC-MIB::enclosureFanCount,OCTET,read-only,,mandatory,,The number of fans present in the storage enclosure. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.41,IDRAC-MIB::enclosurePSUCount,OCTET,read-only,,mandatory,,The number of Power Supply Units (PSU) present  in the storage enclosure. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.42,IDRAC-MIB::enclosureEMMCount,OCTET,read-only,,mandatory,,The number of Enclosure Management Modules (EMM)  present in the storage enclosure. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.43,IDRAC-MIB::enclosureTempProbeCount,OCTET,read-only,,mandatory,,The number of temperature sensing devices  present in the storage enclosure. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.44,IDRAC-MIB::enclosureRedundantPath,OCTET,read-only,,mandatory,,Indicates whether the controller has multiply paths to  reach the storage enclosure. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.45,IDRAC-MIB::enclosurePosition,OCTET,read-only,,mandatory,,The possition of the storage enclosure within a daisy chain. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.46,IDRAC-MIB::enclosureBackplaneBayID,OCTET,read-only,,mandatory,,The unique bay ID of the backplane. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.47,IDRAC-MIB::enclosureFQDD,OCTET,read-only,,mandatory,,The enclosure/backplane's Fully Qualified Device Descriptor (FQDD)  as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.48,IDRAC-MIB::enclosureDisplayName,OCTET,read-only,,mandatory,,The enclosure/backplane's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.49,IDRAC-MIB::enclosureType,INTEGER,read-only,,mandatory,other(1):notApplicable(2):sassata(3):pcie(4):universal(5),The protocol supported by the backplane. Possible states: 1: Not one of the following or could not be determined. 2: Not applicable (i.e. object is not a backplane). 3: Supports SAS/SATA. 4: Supports PCIe. 5: Both SAS/SATA and PCIe. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4,IDRAC-MIB::physicalDiskTable,,not-accessible,,mandatory,,A table of managed physical disks. The number of entries is  related to number of physical Disks discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to  all entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1,IDRAC-MIB::physicalDiskTableEntry,,not-accessible,physicalDiskNumber,mandatory,,An entry in the physical Disk table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.1,IDRAC-MIB::physicalDiskNumber,INTEGER,read-only,,mandatory,,Instance number of this physical disk entry. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.2,IDRAC-MIB::physicalDiskName,OCTET,read-only,,mandatory,,The physical disk's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.3,IDRAC-MIB::physicalDiskManufacturer,OCTET,read-only,,mandatory,,The name of the physical disk's manufacturer. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.4,IDRAC-MIB::physicalDiskState,INTEGER,read-only,,mandatory,unknown(1):ready(2):online(3):foreign(4):offline(5):blocked(6):failed(7):nonraid(8):removed(9):readonly(10),The current state of this physical disk. Possible states: 1: The current state could not be determined. 2: The physical disk is available for use, but no RAID configuration  has been assigned.  3: A RAID configuration has been assigned to the physical disk. 4: The physical disk has been moved from another controller and contains all or some portion of a virtual disk. 5: The physical disk is not available to the RAID controller.  6: The physical disk is currently blocked by controller. 7: The physical disk is not operational. 8: The physical disk is not a RAID capable disk  9: The physical disk has been removed. 10:The physical disk media has been placed in read only mode. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.6,IDRAC-MIB::physicalDiskProductID,OCTET,read-only,,mandatory,,The model number of the physical disk. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.7,IDRAC-MIB::physicalDiskSerialNo,OCTET,read-only,,mandatory,,The physical disk's unique identification number  from the manufacturer. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.8,IDRAC-MIB::physicalDiskRevision,OCTET,read-only,,mandatory,,The firmware version of the physical disk. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.11,IDRAC-MIB::physicalDiskCapacityInMB,INTEGER,read-only,,mandatory,,The size of the physical disk in megabytes. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.17,IDRAC-MIB::physicalDiskUsedSpaceInMB,INTEGER,read-only,,mandatory,,The amount of used space in megabytes on the physical disk. This is not applicable for NVMe devices. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.19,IDRAC-MIB::physicalDiskFreeSpaceInMB,INTEGER,read-only,,mandatory,,The amount of free space in megabytes on the physical disk. This is not applicable for NVMe devices. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.21,IDRAC-MIB::physicalDiskBusType,INTEGER,read-only,,mandatory,unknown(1):scsi(2):sas(3):sata(4):fibre(5):pcie(6):nvme(7),The bus type of the physical disk. Possible values: 1: The bus type could not be determined. 2: Small Computer System Interface (SCSI). 3: Serial Attached SCSI (SAS). 4: Serial Advanced Technology Attachment (SATA). 5: Fibre channel. 6: PCIe. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.22,IDRAC-MIB::physicalDiskSpareState,INTEGER,read-only,,mandatory,notASpare(1):dedicatedHotSpare(2):globalHotSpare(3),The status of the disk as a spare. Possible values: 1: Physical disk is not a spare. 2: Physical disk is a dedicated hot spare. 3: Physical disk is a global hot spare. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.24,IDRAC-MIB::physicalDiskComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the physical disk itself without the  propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK  4: Non-critical  5: Critical 6: Non-recoverable 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.27,IDRAC-MIB::physicalDiskPartNumber,OCTET,read-only,,mandatory,,The part number of the disk. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.28,IDRAC-MIB::physicalDiskSASAddress,OCTET,read-only,,mandatory,,The SAS address of the physical disk. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.29,IDRAC-MIB::physicalDiskNegotiatedSpeed,INTEGER,read-only,,mandatory,unknown(1):oneDotFiveGbps(2):threeGbps(3):sixGbps(4):twelveGbps(5):fiveGTps(6):eightGTps(7):sixteenGTps(8):thirtytwoGTps(9),The data transfer speed that the disk negotiated while spinning up  in Gigbits per second (Gbps). Possible values: 1: The speed could not be determined. 2. 1.5 Gbps 3: 3.0 Gbps 4: 6.0 Gbps 5: 12.0 Gbps 6: 5 GT/s (applicable for NVMe devices). 7: 8 GT/s (applicable for NVMe devices). 8: 16 GT/s (applicable for NVMe devices). 9: 32 GT/s (applicable for NVMe devices). 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.30,IDRAC-MIB::physicalDiskCapableSpeed,INTEGER,read-only,,mandatory,unknown(1):oneDotFiveGbps(2):threeGbps(3):sixGbps(4):twelveGbps(5):fiveGTps(6):eightGTps(7):sixteenGTps(8):thirtytwoGTps(9),The maximum data transfer speed supported by the disk  in Gigbits per second (Gbps). Possible values: 1: The speed could not be determined. 2. 1.5 Gbps 3: 3.0 Gbps 4: 6.0 Gbps 5: 12.0 Gbps 6: 5 GT/s (applicable for NVMe devices). 7: 8 GT/s (applicable for NVMe devices). 8: 16 GT/s (applicable for NVMe devices). 9: 32 GT/s (applicable for NVMe devices). 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.31,IDRAC-MIB::physicalDiskSmartAlertIndication,INTEGER,read-only,,mandatory,,Indicates whether the physical disk has received a predictive  failure alert. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.32,IDRAC-MIB::physicalDiskManufactureDay,OCTET,read-only,,mandatory,,The day of the week (1=Sunday thru 7=Saturday)  on which the physical disk was manufactured. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.33,IDRAC-MIB::physicalDiskManufactureWeek,OCTET,read-only,,mandatory,,The week (1 thru 53) in which the physical disk  was manufactured. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.34,IDRAC-MIB::physicalDiskManufactureYear,OCTET,read-only,,mandatory,,The four digit year in which the physical disk was manufactured. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.35,IDRAC-MIB::physicalDiskMediaType,INTEGER,read-only,,mandatory,unknown(1):hdd(2):ssd(3),The media type of the physical disk. Possible Values: 1: The media type could not be determined. 2: Hard Disk Drive (HDD). 3: Solid State Device (SSD). 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.42,IDRAC-MIB::physicalDiskPowerState,INTEGER,read-only,,mandatory,other(1):spunUp(2):spunDown(3):transition(4):on(5),The power state of the physical disk. Possible Values: 1: Not one of the following. 2: The physical disk is in the spun up state. 3: The physical disk is in the spun down state. 4: The physical disk is changing from spun down state to spun up state or vice versa. 5: The Solid State Device (SSD) is powered on. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.49,IDRAC-MIB::physicalDiskRemainingRatedWriteEndurance,INTEGER,read-only,,mandatory,,This property is applicable to SSD media type only. This indicates  the wear-out percentage of the SSD. Typically it is a value between  0 to 100. However, if the value is not available or not applicable  (in the case of HDD media type) the value will be 255. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.50,IDRAC-MIB::physicalDiskOperationalState,INTEGER,read-only,,mandatory,notApplicable(1):rebuild(2):clear(3):copyback(4),The state of the physical disk when there are progressive operations ongoing. Possible values: 1: There is no active operation running. 2: Data from a redundant virtual disk is  currently being rebuilt onto the physical disk. 3: Data on the disk is being erased. 4: Data is being copied from a hot spare disk to  the physical disk or vice versa. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.51,IDRAC-MIB::physicalDiskProgress,INTEGER,read-only,,mandatory,,The progress percentage of the operation that is being  performed on the physical disk. This is applicable  only if there is a progressive operations ongoing 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.52,IDRAC-MIB::physicalDiskSecurityStatus,INTEGER,read-only,,mandatory,supported(1):notSupported(2):secured(3):locked(4):foreign(5),The security/encryption status of the physical disk. Possible Values: 1: The physical disk supports encryption. 2: The physical disk does not support encryption 3: The physical disk is encrypted. 4: The physical disk is locked by a key. 5: The physical disk is locked by a foreign key. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.53,IDRAC-MIB::physicalDiskFormFactor,INTEGER,read-only,,mandatory,unknown(1):oneDotEight(2):twoDotFive(3):threeDotFive(4):edsffe1DotL(5),The form factor of the physical disk. Possible values: 1: The form factor could not be determined. 2: 1.8 inch. 3: 2.5 inch. 4: 3.5 inch. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.54,IDRAC-MIB::physicalDiskFQDD,OCTET,read-only,,mandatory,,The physical disk's Fully Qualified Device Descriptor (FQDD)  as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.55,IDRAC-MIB::physicalDiskDisplayName,OCTET,read-only,,mandatory,,The physical disk's friendly FQDD as represented in Storage  Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.57,IDRAC-MIB::physicalDiskT10PICapability,INTEGER,read-only,,mandatory,other(1):capable(2):notCapable(3),Indicates whether the physical disk supports the T10 PI (Protection  Information). These protection fields are known as DIF  (Data Integrity Fields). Possible values: 1: Not one of the following. 2: Capable of supporting T10 PI. 3: Not capable of supporting T10 PI. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.58,IDRAC-MIB::physicalDiskBlockSizeInBytes,INTEGER,read-only,,mandatory,,The block size (in bytes) of the physical disk. This is not  applicable for NVMe devices. Possible values: 1: 512. 2: 4096 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.59,IDRAC-MIB::physicalDiskProtocolVersion,OCTET,read-only,,mandatory,,Applicable for NVMe devices only. The NVMe protocol version supported  by the device. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.60,IDRAC-MIB::physicalDiskPCIeNegotiatedLinkWidth,INTEGER,read-only,,mandatory,other(1):notApplicable(2):byOne(3):byTwp(4):byFour(5):byEight(6):bySixteen(7):byThirtyTwp(8),Applicable for NVMe devices only. The PCIe link width negotiated with the host during device initialization. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.61,IDRAC-MIB::physicalDiskPCIeCapableLinkWidth,INTEGER,read-only,,mandatory,other(1):notApplicable(2):byOne(3):byTwp(4):byFour(5):byEight(6):bySixteen(7):byThirtyTwp(8),Applicable for NVMe devices only. The PCIe link widths the device is capable of  supporting. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7,IDRAC-MIB::enclosureFanTable,,not-accessible,,mandatory,,A table of managed fans in the external storage enclosure(s).  The number of entries is related to number of fans discovered in  the enclosure(s). The maximum number of entries is implementation  dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1,IDRAC-MIB::enclosureFanTableEntry,,not-accessible,enclosureFanNumber,mandatory,,An entry in the fan table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1.1,IDRAC-MIB::enclosureFanNumber,INTEGER,read-only,,mandatory,,Instance number of this fan. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1.2,IDRAC-MIB::enclosureFanName,OCTET,read-only,,mandatory,,The fan's name as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1.4,IDRAC-MIB::enclosureFanState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this fan. Possible states: 1: The current state could not be determined. 2: The fan is operating normally. 3: The fan has encountered a hardware problem or is not  responding. 4: The fan is no longer connected to the enclosure or  there exists a problem communicating to it. 5: The fan is unstable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1.11,IDRAC-MIB::enclosureFanSpeed,INTEGER,read-only,,mandatory,,Indicates the current relative speed of the fan. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1.15,IDRAC-MIB::enclosureFanComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the fan itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1.20,IDRAC-MIB::enclosureFanFQDD,OCTET,read-only,,mandatory,,The fan's Fully Qualified Device Descriptor (FQDD)  as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.7.1.21,IDRAC-MIB::enclosureFanDisplayName,OCTET,read-only,,mandatory,,The fan's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9,IDRAC-MIB::enclosurePowerSupplyTable,,not-accessible,,mandatory,,A table of managed Power Supply Units(PSU) in the external  storage enclosure(s). The number of entries is related to number  of power supply unit(s) discovered in the enclosure(s). The  maximum number of entries is implementation  dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1,IDRAC-MIB::enclosurePowerSupplyTableEntry,,not-accessible,enclosurePowerSupplyNumber,mandatory,,An entry in the power supply unit table. A row in this table cannot  be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.1,IDRAC-MIB::enclosurePowerSupplyNumber,INTEGER,read-only,,mandatory,,Instance number of this power supply unit. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.2,IDRAC-MIB::enclosurePowerSupplyName,OCTET,read-only,,mandatory,,The power supply unit's name as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.4,IDRAC-MIB::enclosurePowerSupplyState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this power supply unit. Possible states: 1: The current state could not be determined. 2: The power supply unit is operating normally. 3: The power supply unit has encountered a hardware problem  or is not responding. 4: The power supply unit is no longer connected to the enclosure  or there exists a problem communicating to it. 5: The power supply unit is unstable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.7,IDRAC-MIB::enclosurePowerSupplyPartNumber,OCTET,read-only,,mandatory,,The part number of the power supply unit.  
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.9,IDRAC-MIB::enclosurePowerSupplyComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the power supply unit itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.15,IDRAC-MIB::enclosurePowerSupplyFQDD,OCTET,read-only,,mandatory,,The power supply unit's Fully Qualified Device Descriptor (FQDD) as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.16,IDRAC-MIB::enclosurePowerSupplyDisplayName,OCTET,read-only,,mandatory,,The power supply unit's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11,IDRAC-MIB::enclosureTemperatureProbeTable,,not-accessible,,mandatory,,A table of managed temperature probes in the external storage enclosure(s). The number of entries is related to number of  temperature probes discovered in the enclosure(s). The maximum  number of entries is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1,IDRAC-MIB::enclosureTemperatureProbeTableEntry,,not-accessible,enclosureTemperatureProbeNumber,mandatory,,An entry in the temperature probe table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.1,IDRAC-MIB::enclosureTemperatureProbeNumber,INTEGER,read-only,,mandatory,,Instance number of this temperature probe. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.2,IDRAC-MIB::enclosureTemperatureProbeName,OCTET,read-only,,mandatory,,The temperature probe's name as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.4,IDRAC-MIB::enclosureTemperatureProbeState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this temperature probe. Possible states: 1: The current state could not be determined. 2: The temperature probe is operating normally. 3: The temperature probe has encountered a hardware problem  or is not responding. 4: The temperature probe is no longer connected to the enclosure  or there exists a problem communicating to it. 5: The temperature probe is unstable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.7,IDRAC-MIB::enclosureTemperatureProbeMinWarningValue,INTEGER,read-only,,mandatory,,The minimum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.8,IDRAC-MIB::enclosureTemperatureProbeMinCriticalValue,INTEGER,read-only,,mandatory,,The minimum temperature that will force the probe into a error state. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.9,IDRAC-MIB::enclosureTemperatureProbeMaxWarningValue,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.10,IDRAC-MIB::enclosureTemperatureProbeMaxCriticalValue,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.11,IDRAC-MIB::enclosureTemperatureProbeCurValue,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into a warning state. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.13,IDRAC-MIB::enclosureTemperatureProbeComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure management module.itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.15,IDRAC-MIB::enclosureTemperatureProbeFQDD,OCTET,read-only,,mandatory,,The temperature probe's Fully Qualified Device Descriptor (FQDD) as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.11.1.16,IDRAC-MIB::enclosureTemperatureProbeDisplayName,OCTET,read-only,,mandatory,,The temperature probe's friendly FQDD as represented  in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13,IDRAC-MIB::enclosureManagementModuleTable,,not-accessible,,mandatory,,A table of managed Enclosure Management Modules (EMM)  in the external storage enclosure(s). The number of  entries is related to number of enclosure management modules discovered in the enclosure(s). The maximum number of entries  is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1,IDRAC-MIB::enclosureManagementModuleTableEntry,,not-accessible,enclosureManagementModuleNumber,mandatory,,An entry in the enclosure management module table. A row in  this table cannot be created or deleted by SNMP operations  on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.1,IDRAC-MIB::enclosureManagementModuleNumber,INTEGER,read-only,,mandatory,,Instance number of this enclosure management module. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.2,IDRAC-MIB::enclosureManagementModuleName,OCTET,read-only,,mandatory,,The enclosure management module's name as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.4,IDRAC-MIB::enclosureManagementModuleState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):missing(4):degraded(5),The current state of this enclosure management module. Possible states: 1: The current state could not be determined. 2: The enclosure management module is operating normally. 3: The enclosure management module has encountered a  hardware problem or is not responding. 4: The enclosure management module is no longer connected to the enclosure or there exists a problem communicating to it. 5: The enclosure management module is unstable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.6,IDRAC-MIB::enclosureManagementModulePartNumber,OCTET,read-only,,mandatory,,The part number of the enclosure management module. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.8,IDRAC-MIB::enclosureManagementModuleFWVersion,OCTET,read-only,,mandatory,,Firmware version of the enclosure management module. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.11,IDRAC-MIB::enclosureManagementModuleComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure management module.itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.15,IDRAC-MIB::enclosureManagementModuleFQDD,OCTET,read-only,,mandatory,,The enclosure management module's Fully Qualified Device  Descriptor (FQDD) as represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.13.1.16,IDRAC-MIB::enclosureManagementModuleDisplayName,OCTET,read-only,,mandatory,,The enclosure management module's friendly FQDD as represented in  Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15,IDRAC-MIB::batteryTable,,not-accessible,,mandatory,,A table of managed batteries. The number of  entries is related to number of Batteries discovered in the system. The maximum number of entries  is implementation dependent. Note: The properties in this table may not be applicable to all  entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1,IDRAC-MIB::batteryTableEntry,,not-accessible,batteryNumber,mandatory,,An entry in the battery table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.1,IDRAC-MIB::batteryNumber,INTEGER,read-only,,mandatory,,Instance number of this battery entry. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.4,IDRAC-MIB::batteryState,INTEGER,read-only,,mandatory,unknown(1):ready(2):failed(3):degraded(4):missing(5):charging(6):belowThreshold(7),Current state of battery. Possible values: 1: The current state could not be determined. 2: The battery is operating normally. 3: The battery has failed and needs to be replaced. 4: The battery temperature is high or charge level is depleting. 5: The battery is missing or not detected.  6: The battery is undergoing the re-charge phase. 7: The battery voltage or charge level is below the threshold. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.6,IDRAC-MIB::batteryComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the battery itself without the  propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK  4: Non-critical  5: Critical 6: Non-recoverable
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.10,IDRAC-MIB::batteryPredictedCapacity,INTEGER,read-only,,obsolete,unknown(1):failed(2):ready(3),This entry is obsolete. Use the batteryComponentStatus or  batteryState instead. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.20,IDRAC-MIB::batteryFQDD,OCTET,read-only,,mandatory,,The battery's Fully Qualified Device Descriptor (FQDD) as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.21,IDRAC-MIB::batteryDisplayName,OCTET,read-only,,mandatory,,The battery's friendly FQDD as represented in Storage Management.
.1.3.6.1.4.1.674.10892.5.5.1.20.140,IDRAC-MIB::logicalDevices,,,,,,
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1,IDRAC-MIB::virtualDiskTable,,not-accessible,,mandatory,,A table of managed virtual disks. The number of entries is related to number of virtual disks discovered in the system.  The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1,IDRAC-MIB::virtualDiskTableEntry,,not-accessible,virtualDiskNumber,mandatory,,An entry in the virtual disk table. A row in this table cannot be created or deleted by SNMP operations on columns of the table. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.1,IDRAC-MIB::virtualDiskNumber,INTEGER,read-only,,mandatory,,Instance number of this virtual disk entry. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.2,IDRAC-MIB::virtualDiskName,OCTET,read-only,,mandatory,,The virtual disk's label as entered by the user. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.4,IDRAC-MIB::virtualDiskState,INTEGER,read-only,,mandatory,unknown(1):online(2):failed(3):degraded(4),The current state of this virtual disk (which includes any member physical disks.) Possible states: 1: The current state could not be determined. 2: The virtual disk is operating normally or optimally. 3: The virtual disk has encountered a failure. The data on disk  is lost or is about to be lost. 4: The virtual disk encounterd a failure with one or all of the  constituent redundant physical disks. The data on the virtual  disk might no longer be fault tolerant. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.6,IDRAC-MIB::virtualDiskSizeInMB,INTEGER,read-only,,mandatory,,The size of the virtual disk in megabytes. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.10,IDRAC-MIB::virtualDiskWritePolicy,INTEGER,read-only,,mandatory,writeThrough(1):writeBack(2):writeBackForce(3),The write policy used by the controller for write operations on  this virtual disk. Possible values: 1: Write Through. 2: Write Back. 3: Force Write Back. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.11,IDRAC-MIB::virtualDiskReadPolicy,INTEGER,read-only,,mandatory,noReadAhead(1):readAhead(2):adaptiveReadAhead(3),The read policy used by the controller for read operations on  this virtual disk. Possible values: 1: No Read Ahead. 2: Read Ahead. 3: Adaptive Read Ahead. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.13,IDRAC-MIB::virtualDiskLayout,INTEGER,read-only,,mandatory,other(1):r0(2):r1(3):r5(4):r6(5):r10(6):r50(7):r60(8):concatRaid1(9):concatRaid5(10),The virtual disk's RAID type. Possible values: 1: Not one of the following 2: RAID-0 3: RAID-1 4: RAID-5 5: RAID-6 6: RAID-10 7: RAID-50 8: RAID-60 9: Concatenated RAID 1 10: Concatenated RAID 5 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.14,IDRAC-MIB::virtualDiskStripeSize,INTEGER,read-only,,mandatory,other(1):default(2):fiveHundredAndTwelvebytes(3):oneKilobytes(4):twoKilobytes(5):fourKilobytes(6):eightKilobytes(7):sixteenKilobytes(8):thirtyTwoKilobytes(9):sixtyFourKilobytes(10):oneTwentyEightKilobytes(11):twoFiftySixKilobytes(12):fiveOneTwoKilobytes(13):oneMegabye(14):twoMegabytes(15):fourMegabytes(16):eightMegabytes(17):sixteenMegabytes(18),The stripe size of this virtual disk. Possible values: 1: Not one of the following 2: Default. 3: 512 bytes 4: 1 kB, 5: 2 kB, 6: 4 kB, 7: 8 kB, 8: 16 kB, 9: 32 kB, 10: 64 kB, 11: 128 kB, 12: 256 kB, 13: 512 kB, 14: 1 MB, 15: 2 MB, 16: 4 MB, 17: 8 MB, 18: 16 MB 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.20,IDRAC-MIB::virtualDiskComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the virtual disk itself without the  propagation of any contained component status. Possible values: 1: Other. 2: Unknown. 3: OK. 4: Non-critical . 5: Critical. 6: Non-recoverable. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.23,IDRAC-MIB::virtualDiskBadBlocksDetected,INTEGER,read-only,,mandatory,,Indicates whether the virtual disk has bad blocks. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.24,IDRAC-MIB::virtualDiskSecured,INTEGER,read-only,,mandatory,,Indicates whether the virtual disk is secured or not. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.25,IDRAC-MIB::virtualDiskIsCacheCade,INTEGER,read-only,,mandatory,,Indicates whether the virtual disk is being used as a secondary  cache by the controller. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.26,IDRAC-MIB::virtualDiskDiskCachePolicy,INTEGER,read-only,,mandatory,enabled(1):disabled(2):defullt(3),The cache policy of the physical disks that are  part of this virtual disk  Possible values: 1: Enabled. 2: Disabled. 3: Default. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.30,IDRAC-MIB::virtualDiskOperationalState,INTEGER,read-only,,mandatory,notApplicable(1):reconstructing(2):resynching(3):initializing(4):backgroundInit(5),The state of the virtual disk when there are progressive operations ongoing. Possible values: 1: There is no active operation running. 2: The virtual disk configuration has changed. The physical disks included in the virtual disk are being  modified to support the new configuration. 3: A Consistency Check (CC) is being performed  on the virtual disk. 4: The virtual disk is being initialized. 5: BackGround Initialization (BGI) is being performed  on the virtual disk. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.31,IDRAC-MIB::virtualDiskProgress,INTEGER,read-only,,mandatory,,The progress percentage of the operation that is being  performed on the virtual disk. This is applicable  only if there is a progressive operations ongoing 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.32,IDRAC-MIB::virtualDiskAvailableProtocols,OCTET,read-only,,mandatory,,List of protocols support by physical disks part of this virtual disk. For e.g. SAS for Serial Attached SCSI or SATA for  Serial Advanced Technology Attachment. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.33,IDRAC-MIB::virtualDiskMediaType,OCTET,read-only,,mandatory,,List of media types of the physical disks part of this virtual disk. For e.g. HDD for Hard Disk Drive or SSD for Solid State Device. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.34,IDRAC-MIB::virtualDiskRemainingRedundancy,INTEGER,read-only,,mandatory,,The number of physical disks which can be lost before the virtual disk loses its redundancy. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.35,IDRAC-MIB::virtualDiskFQDD,OCTET,read-only,,mandatory,,The virtual disk's Fully Qualified Device Descriptor (FQDD) as  represented in Storage Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.36,IDRAC-MIB::virtualDiskDisplayName,OCTET,read-only,,mandatory,,The virtual disk's friendly FQDD as represented in Storage  Management. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.37,IDRAC-MIB::virtualDiskT10PIStatus,INTEGER,read-only,,mandatory,other(1):enabled(2):disabled(3),Indicates whether the virtual disk supports the T10 PI (Protection  Information). These protection fields are known as DIF  (Data Integrity Fields). Possible values: 1: Not one of the following. 2: Enabled. 3: Disabled. 
.1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.38,IDRAC-MIB::virtualDiskBlockSizeInBytes,INTEGER,read-only,,mandatory,,The block size (in bytes) of the physical disk part of the virtual disk. Possible values: 1: 512. 2: 4096 
.1.3.6.1.4.1.674.10892.5.6,IDRAC-MIB-SMIv2::conformanceGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.6.1,IDRAC-MIB-SMIv2::conformanceMIBCompliances,,,,,,
.1.3.6.1.4.1.674.10892.5.6.2,IDRAC-MIB-SMIv2::conformanceMIBGroups,,,,,,
.1.3.6.1.4.1.674.10892.5.6.2.1,IDRAC-MIB-SMIv2::racInfoObjGroup,,,,,,A collection of objects providing information about the remote access card.
.1.3.6.1.4.1.674.10892.5.6.2.2,IDRAC-MIB-SMIv2::chassisInfoObjGroup,,,,,,A collection of objects providing information about the Chassis group.
.1.3.6.1.4.1.674.10892.5.6.2.3,IDRAC-MIB-SMIv2::systemInfoObjGroup,,,,,,A collection of objects providing information about the System group.
.1.3.6.1.4.1.674.10892.5.6.2.4,IDRAC-MIB-SMIv2::statusInfoObjGroup,,,,,,A collection of objects providing information about the status group.
.1.3.6.1.4.1.674.10892.5.6.2.5,IDRAC-MIB-SMIv2::alertInfoObjGroup,,,,,,A collection of objects providing information about the alert group.
.1.3.6.1.4.1.674.10892.5.6.2.6,IDRAC-MIB-SMIv2::mibVersionInfoObjGroup,,,,,,A collection of objects providing information about the mib version group.
.1.3.6.1.4.1.674.10892.5.6.2.7,IDRAC-MIB-SMIv2::systemStateTableInfoObjGroup,,,,,,A collection of objects providing information about the System State Table group.
.1.3.6.1.4.1.674.10892.5.6.2.8,IDRAC-MIB-SMIv2::chassisInformationObjGroup,,,,,,A collection of objects providing information about the System chassis information group.
.1.3.6.1.4.1.674.10892.5.6.2.9,IDRAC-MIB-SMIv2::chassisInformationTableObjGroup,,,,,,A collection of objects providing information about the System chassis information table group.
.1.3.6.1.4.1.674.10892.5.6.2.11,IDRAC-MIB-SMIv2::eventLogTableObjGroup,,,,,,A collection of objects providing information about the event log table group.
.1.3.6.1.4.1.674.10892.5.6.2.12,IDRAC-MIB-SMIv2::systemBiosTableObjGroup,,,,,,A collection of objects providing information about the system Bios table group.
.1.3.6.1.4.1.674.10892.5.6.2.13,IDRAC-MIB-SMIv2::firmwareTableObjGroup,,,,,,A collection of objects providing information about the firmware table group.
.1.3.6.1.4.1.674.10892.5.6.2.14,IDRAC-MIB-SMIv2::intrusionTableObjGroup,,,,,,A collection of objects providing information about the intrusion table group.
.1.3.6.1.4.1.674.10892.5.6.2.15,IDRAC-MIB-SMIv2::lcLogTableObjGroup,,,,,,A collection of objects providing information about the lc log table group.
.1.3.6.1.4.1.674.10892.5.6.2.16,IDRAC-MIB-SMIv2::powerUnitTableObjGroup,,,,,,A collection of objects providing information about the power unit table group.
.1.3.6.1.4.1.674.10892.5.6.2.17,IDRAC-MIB-SMIv2::powerSupplyTableObjGroup,,,,,,A collection of objects providing information about the power supply table group.
.1.3.6.1.4.1.674.10892.5.6.2.18,IDRAC-MIB-SMIv2::voltageProbeTableTableObjGroup,,,,,,A collection of objects providing information about the Voltage Probe Table group.
.1.3.6.1.4.1.674.10892.5.6.2.19,IDRAC-MIB-SMIv2::amperageProbeTableObjGroup,,,,,,A collection of objects providing information about the Amperage Probe Table group.
.1.3.6.1.4.1.674.10892.5.6.2.20,IDRAC-MIB-SMIv2::systemBatteryTableObjGroup,,,,,,A collection of objects providing information about the System Battery Table group.
.1.3.6.1.4.1.674.10892.5.6.2.21,IDRAC-MIB-SMIv2::powerUsageTableObjGroup,,,,,,A collection of objects providing information about the Power Usage Table group.
.1.3.6.1.4.1.674.10892.5.6.2.22,IDRAC-MIB-SMIv2::coolingUnitTableObjGroup,,,,,,A collection of objects providing information about the Cooling Unit Table group.
.1.3.6.1.4.1.674.10892.5.6.2.23,IDRAC-MIB-SMIv2::coolingDeviceTableObjGroup,,,,,,A collection of objects providing information about the Cooling Device Table group.
.1.3.6.1.4.1.674.10892.5.6.2.24,IDRAC-MIB-SMIv2::temperatureProbeTableObjGroup,,,,,,A collection of objects providing information about the Temperature Probe Table group.
.1.3.6.1.4.1.674.10892.5.6.2.25,IDRAC-MIB-SMIv2::processorDeviceTableObjGroup,,,,,,A collection of objects providing information about the Processor Device Table group.
.1.3.6.1.4.1.674.10892.5.6.2.26,IDRAC-MIB-SMIv2::processorDeviceStatusTableObjGroup,,,,,,A collection of objects providing information about the Processor Device Status Table group.
.1.3.6.1.4.1.674.10892.5.6.2.27,IDRAC-MIB-SMIv2::memoryDeviceTableObjGroup,,,,,,A collection of objects providing information about the Memory Device Table group.
.1.3.6.1.4.1.674.10892.5.6.2.28,IDRAC-MIB-SMIv2::pCIDeviceTableObjGroup,,,,,,A collection of objects providing information about the PCI Device Table group.
.1.3.6.1.4.1.674.10892.5.6.2.29,IDRAC-MIB-SMIv2::networkDeviceTableObjGroup,,,,,,A collection of objects providing information about the Network Device Table group.
.1.3.6.1.4.1.674.10892.5.6.2.30,IDRAC-MIB-SMIv2::systemSlotTableObjGroup,,,,,,A collection of objects providing information about the System Slot Table group.
.1.3.6.1.4.1.674.10892.5.6.2.31,IDRAC-MIB-SMIv2::fruTableObjGroup,,,,,,A collection of objects providing information about the Fru Table group.
.1.3.6.1.4.1.674.10892.5.6.2.32,IDRAC-MIB-SMIv2::batteryTableObjGroup,,,,,,A collection of objects providing information about the Battery Table group.
.1.3.6.1.4.1.674.10892.5.6.2.33,IDRAC-MIB-SMIv2::controllerTableObjGroup,,,,,,A collection of objects providing information about the Controller Table group.
.1.3.6.1.4.1.674.10892.5.6.2.34,IDRAC-MIB-SMIv2::physicalDiskTableObjGroup,,,,,,A collection of objects providing information about the Physical Disk Table group.
.1.3.6.1.4.1.674.10892.5.6.2.35,IDRAC-MIB-SMIv2::virtualDiskTableObjGroup,,,,,,A collection of objects providing information about the Virtual Disk Table group.
.1.3.6.1.4.1.674.10892.5.6.2.36,IDRAC-MIB-SMIv2::enclosureTableObjGroup,,,,,,A collection of objects providing information about the Enclosure Table group.
.1.3.6.1.4.1.674.10892.5.6.2.37,IDRAC-MIB-SMIv2::enclosureManagementModuleTableObjGroup,,,,,,A collection of objects providing information about the Enclosure Management Module Table group.
.1.3.6.1.4.1.674.10892.5.6.2.38,IDRAC-MIB-SMIv2::enclosureFanTableObjGroup,,,,,,A collection of objects providing information about the Enclosure Fan Table group.
.1.3.6.1.4.1.674.10892.5.6.2.39,IDRAC-MIB-SMIv2::enclosurePowerSupplyTableObjGroup,,,,,,A collection of objects providing information about the Enclosure Power Supply Table group.
.1.3.6.1.4.1.674.10892.5.6.2.40,IDRAC-MIB-SMIv2::enclosureTemperatureProbeTableObjGroup,,,,,,A collection of objects providing information about the Enclosure Temperature Probe Table group.
.1.3.6.1.4.1.674.10892.5.6.4,IDRAC-MIB-SMIv2::conformanceMIBnotificationGroup,,,,,,
.1.3.6.1.4.1.674.10892.5.6.4.1,IDRAC-MIB-SMIv2::alertnotification,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.2,IDRAC-MIB-SMIv2::alertAutomaticSystemRecoveryTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.3,IDRAC-MIB-SMIv2::alertBatteryTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.4,IDRAC-MIB-SMIv2::cableTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.5,IDRAC-MIB-SMIv2::cmcTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.6,IDRAC-MIB-SMIv2::processorDeviceStatusTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.7,IDRAC-MIB-SMIv2::processorDeviceAbsentTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.8,IDRAC-MIB-SMIv2::fanTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.9,IDRAC-MIB-SMIv2::fiberChannelTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.10,IDRAC-MIB-SMIv2::hardwareConfigurationTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.11,IDRAC-MIB-SMIv2::ioVirtualizationTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.12,IDRAC-MIB-SMIv2::linkStatusTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.13,IDRAC-MIB-SMIv2::memoryDeviceTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.14,IDRAC-MIB-SMIv2::nicTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.15,IDRAC-MIB-SMIv2::osTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.16,IDRAC-MIB-SMIv2::pciDeviceTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.17,IDRAC-MIB-SMIv2::physicaldiskTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.18,IDRAC-MIB-SMIv2::biosPOSTTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.19,IDRAC-MIB-SMIv2::powerSupplyTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.20,IDRAC-MIB-SMIv2::powerSupplyAbsentTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.21,IDRAC-MIB-SMIv2::powerUsageTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.22,IDRAC-MIB-SMIv2::redundancyTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.23,IDRAC-MIB-SMIv2::integratedDualSDModuleTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.24,IDRAC-MIB-SMIv2::integratedDualSDModuleAbsentTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.25,IDRAC-MIB-SMIv2::integratedDualSDModuleRedundancyTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.26,IDRAC-MIB-SMIv2::securityEventTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.27,IDRAC-MIB-SMIv2::systemEventLogTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.28,IDRAC-MIB-SMIv2::softwareConfigurationTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.29,IDRAC-MIB-SMIv2::temperatureProbeTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.30,IDRAC-MIB-SMIv2::temperatureStatisticsTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.31,IDRAC-MIB-SMIv2::vFlashMediaDeviceTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.32,IDRAC-MIB-SMIv2::vFlashMediaDeviceAbsentTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.33,IDRAC-MIB-SMIv2::voltageProbeTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.34,IDRAC-MIB-SMIv2::racTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.35,IDRAC-MIB-SMIv2::systemPerformanceTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.36,IDRAC-MIB-SMIv2::batteryTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.37,IDRAC-MIB-SMIv2::storageControllerTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.38,IDRAC-MIB-SMIv2::enclosureTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.39,IDRAC-MIB-SMIv2::fanStorageTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.40,IDRAC-MIB-SMIv2::physicalDiskTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.41,IDRAC-MIB-SMIv2::storagePowerSupplyTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.42,IDRAC-MIB-SMIv2::alertStorageSecurityTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.43,IDRAC-MIB-SMIv2::alertStorageManagementTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.44,IDRAC-MIB-SMIv2::alertStorageTemperatureProbeTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.45,IDRAC-MIB-SMIv2::alertStorageVirtualDiskTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.46,IDRAC-MIB-SMIv2::alertUpdateJobTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.47,IDRAC-MIB-SMIv2::alertSoftwareChangeUpdateNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.48,IDRAC-MIB-SMIv2::alertCMCAuditNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.49,IDRAC-MIB-SMIv2::alertDebugNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.50,IDRAC-MIB-SMIv2::alertiDRACIPAddressChangeNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.51,IDRAC-MIB-SMIv2::alertLicenseNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.52,IDRAC-MIB-SMIv2::alertPCIDeviceAuditNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.53,IDRAC-MIB-SMIv2::alertPowerSupplyAuditNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.54,IDRAC-MIB-SMIv2::alertPowerUsageAuditNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.55,IDRAC-MIB-SMIv2::alertSystemPowerStateChangeNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.56,IDRAC-MIB-SMIv2::alertUserTrackingNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.57,IDRAC-MIB-SMIv2::alertAutoDiscoveryNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.58,IDRAC-MIB-SMIv2::alertNetworkConfigurationNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.59,IDRAC-MIB-SMIv2::alertIPAddressConfigurationNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.60,IDRAC-MIB-SMIv2::alertJobControlConfigurationNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.61,IDRAC-MIB-SMIv2::alertPCIDeviceConfigurationNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.62,IDRAC-MIB-SMIv2::alertSecurityConfigurationNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.63,IDRAC-MIB-SMIv2::alertSWCConfigurationNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.64,IDRAC-MIB-SMIv2::alertTestTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.65,IDRAC-MIB-SMIv2::alertInternaliDRACMemoryUnresponsiveTrapNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.66,IDRAC-MIB-SMIv2::storageSolidstateDriveTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.67,IDRAC-MIB-SMIv2::alertConfigurationChangeAuditNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.68,IDRAC-MIB-SMIv2::alertServerIdleTimeNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.69,IDRAC-MIB-SMIv2::alertHWCAuditNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.70,IDRAC-MIB-SMIv2::liquidCoolingTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.71,IDRAC-MIB-SMIv2::alertStorageSoftwareDefinedSubSystemTrapsNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.72,IDRAC-MIB-SMIv2::alertTemparatureProbeAuditNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.5.6.4.73,IDRAC-MIB-SMIv2::alertPRDeviceDetectionNotificationGroup,,,,,,The one notification which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10892.6,DELL-MM-MIB::dmmOutOfBandGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.1,DELL-MM-MIB::dmmInformationGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.1.1,DELL-MM-MIB::dmmProductInfoGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.1.1.1,DELL-MM-MIB::dmmProductName,OCTET,read-only,,mandatory,,This attribute defines the product name of a chassis management module.
.1.3.6.1.4.1.674.10892.6.1.1.2,DELL-MM-MIB::dmmProductShortName,OCTET,read-only,,mandatory,,This attribute defines the short product name of a chassis management module. 
.1.3.6.1.4.1.674.10892.6.1.1.3,DELL-MM-MIB::dmmProductDescription,OCTET,read-only,,mandatory,,This attribute defines the product description of a chassis management module. 
.1.3.6.1.4.1.674.10892.6.1.1.4,DELL-MM-MIB::dmmProductManufacturer,OCTET,read-only,,mandatory,,This attribute defines the product manufacturer of a chassis management module. 
.1.3.6.1.4.1.674.10892.6.1.1.5,DELL-MM-MIB::dmmProductVersion,OCTET,read-only,,mandatory,,This attribute defines the product version of a chassis management module. 
.1.3.6.1.4.1.674.10892.6.1.1.6,DELL-MM-MIB::dmmChassisServiceTag,OCTET,read-only,,mandatory,,This attribute defines the Service Tag of the chassis. 
.1.3.6.1.4.1.674.10892.6.1.1.7,DELL-MM-MIB::dmmProductURL,OCTET,read-only,,mandatory,,This attribute defines the out-of-band UI URL of a chassis management module. 
.1.3.6.1.4.1.674.10892.6.1.1.8,DELL-MM-MIB::dmmProductChassisAssetTag,OCTET,read-only,,mandatory,,This attribute defines the Asset Tag of the chassis. 
.1.3.6.1.4.1.674.10892.6.1.1.9,DELL-MM-MIB::dmmProductChassisName,OCTET,read-only,,mandatory,,This attribute defines the name of the chassis. 
.1.3.6.1.4.1.674.10892.6.1.1.10,DELL-MM-MIB::dmmProductType,INTEGER,read-only,,mandatory,other(1):unknown(2):mxMM(3),This attribute defines type of a remote management module 
.1.3.6.1.4.1.674.10892.6.1.1.11,DELL-MM-MIB::dmmProductChassisDataCenter,OCTET,read-only,,mandatory,,This attribute defines the Data Center locator of the chassis. 
.1.3.6.1.4.1.674.10892.6.1.1.12,DELL-MM-MIB::dmmProductChassisAisle,OCTET,read-only,,mandatory,,This attribute defines the Aisle locator of the chassis. 
.1.3.6.1.4.1.674.10892.6.1.1.13,DELL-MM-MIB::dmmProductChassisRack,OCTET,read-only,,mandatory,,This attribute defines the Rack locator of the chassis. 
.1.3.6.1.4.1.674.10892.6.1.1.14,DELL-MM-MIB::dmmProductChassisRackSlot,OCTET,read-only,,mandatory,,This attribute defines the Rack Slot locator of the chassis. 
.1.3.6.1.4.1.674.10892.6.1.1.15,DELL-MM-MIB::dmmProductChassisModel,OCTET,read-only,,mandatory,,This attribute defines the Model of the chassis.
.1.3.6.1.4.1.674.10892.6.1.1.16,DELL-MM-MIB::dmmProductChassisExpressServiceCode,OCTET,read-only,,mandatory,,This attribute defines the Express Service Code of the chassis.
.1.3.6.1.4.1.674.10892.6.1.1.17,DELL-MM-MIB::dmmProductChassisSystemID,INTEGER,read-only,,mandatory,,This attribute defines the System ID of the chassis.
.1.3.6.1.4.1.674.10892.6.1.2,DELL-MM-MIB::dmmFirmwareGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.1.2.1,DELL-MM-MIB::dmmFirmwareVersion,OCTET,read-only,,mandatory,,This attribute defines the firmware version of chassis management module 1.
.1.3.6.1.4.1.674.10892.6.1.2.2,DELL-MM-MIB::dmmFirmwareVersion2,OCTET,read-only,,mandatory,,This attribute defines the firmware version of chassis management module 2.
.1.3.6.1.4.1.674.10892.6.2,DELL-MM-MIB::dmmStatusGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.2.1,DELL-MM-MIB::dmmGlobalSystemStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the overall chassis status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3,DELL-MM-MIB::dmmChassisStatusGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.3.1,DELL-MM-MIB::dmmStatusNowGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.3.1.1,DELL-MM-MIB::dmmIOMCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the IOM subsystem status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3.1.2,DELL-MM-MIB::dmmRedCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the Redundancy status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3.1.3,DELL-MM-MIB::dmmPowerCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the power subsystem health status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3.1.4,DELL-MM-MIB::dmmFanCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the Fan subsystem health status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3.1.5,DELL-MM-MIB::dmmBladeCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the Blade subsystem health status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3.1.6,DELL-MM-MIB::dmmTempCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the Temp Sensor subsystem health status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3.1.7,DELL-MM-MIB::dmmMMCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the health status being monitored by the chassis management module.
.1.3.6.1.4.1.674.10892.6.3.1.8,DELL-MM-MIB::dmmChassisFrontPanelAmbientTemperature,INTEGER,read-only,,mandatory,,This attribute defines the ambient temperature reading (in degrees Celsius) for the chassis front panel module.
.1.3.6.1.4.1.674.10892.6.4,DELL-MM-MIB::dmmChassisPowerGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.4.1,DELL-MM-MIB::dmmPowerTable,,not-accessible,,mandatory,,This object defines the power table.
.1.3.6.1.4.1.674.10892.6.4.1.1,DELL-MM-MIB::dmmPowerTableEntry,,not-accessible,dmmPowerChassisIndex,mandatory,,This object defines the power table entry.
.1.3.6.1.4.1.674.10892.6.4.1.1.1,DELL-MM-MIB::dmmPowerChassisIndex,INTEGER,read-only,,mandatory,,This attribute defines the index
.1.3.6.1.4.1.674.10892.6.4.1.1.2,DELL-MM-MIB::dmmPowerIdlePower,OCTET,read-only,,mandatory,,This attribute defines the power (in Watts) required by 
.1.3.6.1.4.1.674.10892.6.4.1.1.3,DELL-MM-MIB::dmmPowerKWhCumulative,OCTET,read-only,,mandatory,,This attribute defines the cumulative chassis power
.1.3.6.1.4.1.674.10892.6.4.1.1.4,DELL-MM-MIB::dmmPowerKWhCumulativeTime,OCTET,read-only,,mandatory,,This attribute defines the timestamp of the most recent
.1.3.6.1.4.1.674.10892.6.4.1.1.5,DELL-MM-MIB::dmmPowerWattsPeakUsage,OCTET,read-only,,mandatory,,This attribute defines the chassis peak power
.1.3.6.1.4.1.674.10892.6.4.1.1.6,DELL-MM-MIB::dmmPowerWattsPeakTime,OCTET,read-only,,mandatory,,This attribute defines the timestamp of the most recent
.1.3.6.1.4.1.674.10892.6.4.1.1.7,DELL-MM-MIB::dmmPowerWattsMinUsage,OCTET,read-only,,mandatory,,This attribute defines the chassis mimimum power
.1.3.6.1.4.1.674.10892.6.4.1.1.8,DELL-MM-MIB::dmmPowerWattsMinTime,OCTET,read-only,,mandatory,,This attribute defines the timestamp of the most recent
.1.3.6.1.4.1.674.10892.6.4.1.1.9,DELL-MM-MIB::dmmPowerWattsReading,OCTET,read-only,,mandatory,,This attribute defines the instantaneous chassis power
.1.3.6.1.4.1.674.10892.6.4.2,DELL-MM-MIB::dmmPSUTable,,not-accessible,,mandatory,,This object defines the PSU table.
.1.3.6.1.4.1.674.10892.6.4.2.1,DELL-MM-MIB::dmmPSUTableEntry,,not-accessible,dmmPSUChassisIndex:dmmPSUIndex,mandatory,,This object defines the PSU table entry.
.1.3.6.1.4.1.674.10892.6.4.2.1.1,DELL-MM-MIB::dmmPSUChassisIndex,INTEGER,read-only,,mandatory,,This attribute defines the index
.1.3.6.1.4.1.674.10892.6.4.2.1.2,DELL-MM-MIB::dmmPSUIndex,INTEGER,read-only,,mandatory,,This attribute defines the index
.1.3.6.1.4.1.674.10892.6.4.2.1.3,DELL-MM-MIB::dmmPSULocation,OCTET,read-only,,mandatory,,This attribute defines the location
.1.3.6.1.4.1.674.10892.6.4.2.1.4,DELL-MM-MIB::dmmPSUState,OCTET,read-only,,mandatory,,This attribute defines the enabled state of
.1.3.6.1.4.1.674.10892.6.4.2.1.5,DELL-MM-MIB::dmmPSUType,OCTET,read-only,,mandatory,,This attribute defines the type
.1.3.6.1.4.1.674.10892.6.4.2.1.6,DELL-MM-MIB::dmmPSUCapacity,OCTET,read-only,,mandatory,,This attribute defines the capacity in watts
.1.3.6.1.4.1.674.10892.6.4.2.1.7,DELL-MM-MIB::dmmPSUVoltage,OCTET,read-only,,mandatory,,This attribute defines the input voltage
.1.3.6.1.4.1.674.10892.6.4.2.1.8,DELL-MM-MIB::dmmPSUCurrStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),This attribute defines the current status
.1.3.6.1.4.1.674.10892.6.5,DELL-MM-MIB::dmmChassisAlert2Group,,,,,,
.1.3.6.1.4.1.674.10892.6.5.0,DELL-MM-MIB::dmmChassisAlert2Group#,,,,,,
.1.3.6.1.4.1.674.10892.6.5.0.2153,DELL-MM-MIB::alert2FanFailure,,,,,,Fan failure.
.1.3.6.1.4.1.674.10892.6.5.0.2154,DELL-MM-MIB::alert2FanWarning,,,,,,Fan warning.
.1.3.6.1.4.1.674.10892.6.5.0.2155,DELL-MM-MIB::alert2FanInformation,,,,,,Fan information.
.1.3.6.1.4.1.674.10892.6.5.0.2161,DELL-MM-MIB::alert2TemperatureProbeFailure,,,,,,Temperature sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.6.5.0.2162,DELL-MM-MIB::alert2TemperatureProbeWarning,,,,,,Temperature sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.6.5.0.2163,DELL-MM-MIB::alert2TemperatureProbeNormal,,,,,,Temperature sensor value is within range.
.1.3.6.1.4.1.674.10892.6.5.0.2169,DELL-MM-MIB::alert2VoltageProbeFailure,,,,,,Voltage sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.6.5.0.2170,DELL-MM-MIB::alert2VoltageProbeWarning,,,,,,Voltage sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.6.5.0.2171,DELL-MM-MIB::alert2VoltageProbeNormal,,,,,,Voltage sensor reading is within range.
.1.3.6.1.4.1.674.10892.6.5.0.2177,DELL-MM-MIB::alert2AmperageProbeFailure,,,,,,Current sensor has detected a failure value.
.1.3.6.1.4.1.674.10892.6.5.0.2178,DELL-MM-MIB::alert2AmperageProbeWarning,,,,,,Current sensor has detected a warning value.
.1.3.6.1.4.1.674.10892.6.5.0.2179,DELL-MM-MIB::alert2AmperageProbeNormal,,,,,,Current sensor reading is within range.
.1.3.6.1.4.1.674.10892.6.5.0.2185,DELL-MM-MIB::alert2PowerSupplyFailure,,,,,,Power supply has detected a failure.
.1.3.6.1.4.1.674.10892.6.5.0.2186,DELL-MM-MIB::alert2PowerSupplyWarning,,,,,,Power supply has detected a warning.
.1.3.6.1.4.1.674.10892.6.5.0.2187,DELL-MM-MIB::alert2PowerSupplyNormal,,,,,,Power supply has returned to normal.
.1.3.6.1.4.1.674.10892.6.5.0.2225,DELL-MM-MIB::alert2BatteryFailure,,,,,,Battery has failed or battery is absent.
.1.3.6.1.4.1.674.10892.6.5.0.2226,DELL-MM-MIB::alert2BatteryWarning,,,,,,Battery is low.
.1.3.6.1.4.1.674.10892.6.5.0.2227,DELL-MM-MIB::alert2BatteryNormal,,,,,,Battery state has returned to normal; or battery presence had been detected.
.1.3.6.1.4.1.674.10892.6.5.0.2249,DELL-MM-MIB::alert2LinkStatusFailure,,,,,,Link status failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.2250,DELL-MM-MIB::alert2LinkStatusWarning,,,,,,Link status warning.
.1.3.6.1.4.1.674.10892.6.5.0.2251,DELL-MM-MIB::alert2LinkStatusInformation,,,,,,Link status information.
.1.3.6.1.4.1.674.10892.6.5.0.2273,DELL-MM-MIB::alert2PowerUsageFailure,,,,,,Power usage failure.
.1.3.6.1.4.1.674.10892.6.5.0.2274,DELL-MM-MIB::alert2PowerUsageWarning,,,,,,Power usage warning.
.1.3.6.1.4.1.674.10892.6.5.0.2275,DELL-MM-MIB::alert2PowerUsageInformation,,,,,,Power usage information.
.1.3.6.1.4.1.674.10892.6.5.0.2329,DELL-MM-MIB::alert2HardwareConfigurationFailure,,,,,,Hardware configuration failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.2330,DELL-MM-MIB::alert2HardwareConfigurationWarning,,,,,,Hardware configuration warning.
.1.3.6.1.4.1.674.10892.6.5.0.2331,DELL-MM-MIB::alert2HardwareConfigurationInformation,,,,,,Hardware configuration information.
.1.3.6.1.4.1.674.10892.6.5.0.2337,DELL-MM-MIB::alert2SoftwareConfigurationFailure,,,,,,Software configuration failure.
.1.3.6.1.4.1.674.10892.6.5.0.2338,DELL-MM-MIB::alert2SoftwareConfigurationWarning,,,,,,Software configuration warning.
.1.3.6.1.4.1.674.10892.6.5.0.2339,DELL-MM-MIB::alert2SoftwareConfigurationInformation,,,,,,Software configuration information.
.1.3.6.1.4.1.674.10892.6.5.0.2377,DELL-MM-MIB::alert2SystemEventLogFailure,,,,,,System Event Log failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.2378,DELL-MM-MIB::alert2SystemEventLogWarning,,,,,,System Event Log warning.
.1.3.6.1.4.1.674.10892.6.5.0.2379,DELL-MM-MIB::alert2SystemEventLogInformation,,,,,,System Event Log information.
.1.3.6.1.4.1.674.10892.6.5.0.2385,DELL-MM-MIB::alert2SecurityFailure,,,,,,Security failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.2386,DELL-MM-MIB::alert2SecurityWarning,,,,,,Security warning.
.1.3.6.1.4.1.674.10892.6.5.0.2387,DELL-MM-MIB::alert2SecurityInformation,,,,,,Security information.
.1.3.6.1.4.1.674.10892.6.5.0.2393,DELL-MM-MIB::alert2CableFailure,,,,,,Cable failure.
.1.3.6.1.4.1.674.10892.6.5.0.2465,DELL-MM-MIB::alert2PowerSupplyAbsent,,,,,,Power supply is absent.
.1.3.6.1.4.1.674.10892.6.5.0.2473,DELL-MM-MIB::alert2RedundancyLost,,,,,,Redundancy is lost.
.1.3.6.1.4.1.674.10892.6.5.0.2474,DELL-MM-MIB::alert2RedundancyDegraded,,,,,,Redundancy is degraded.
.1.3.6.1.4.1.674.10892.6.5.0.2475,DELL-MM-MIB::alert2RedundancyInformation,,,,,,Redundancy information.
.1.3.6.1.4.1.674.10892.6.5.0.2545,DELL-MM-MIB::alert2CMCFailure,,,,,,Chassis Management Module detected an error.
.1.3.6.1.4.1.674.10892.6.5.0.2546,DELL-MM-MIB::alert2CMCWarning,,,,,,Chassis Management Module detected a warning.
.1.3.6.1.4.1.674.10892.6.5.0.2553,DELL-MM-MIB::alert2IOVirtualizationFailure,,,,,,IO Virtualization failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.2554,DELL-MM-MIB::alert2IOVirtualizationWarning,,,,,,IO Virtualization warning.
.1.3.6.1.4.1.674.10892.6.5.0.2555,DELL-MM-MIB::alert2IOVirtualizationInformation,,,,,,IO Virtualization information.
.1.3.6.1.4.1.674.10892.6.5.0.4177,DELL-MM-MIB::alert2StorageManagementFailure,,,,,,Storage Management has detected a device independent error condition. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.6.5.0.4178,DELL-MM-MIB::alert2StorageManagementWarning,,,,,,Storage Management has detected a device independent warning condition. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.6.5.0.4179,DELL-MM-MIB::alert2StorageManagementInformation,,,,,,Storage Management information. There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10892.6.5.0.4201,DELL-MM-MIB::alert2StorageFanFailure,,,,,,Storage Fan failure.
.1.3.6.1.4.1.674.10892.6.5.0.4202,DELL-MM-MIB::alert2StorageFanWarning,,,,,,Storage Fan warning.
.1.3.6.1.4.1.674.10892.6.5.0.4203,DELL-MM-MIB::alert2StorageFanInformation,,,,,,Storage Fan information.
.1.3.6.1.4.1.674.10892.6.5.0.4209,DELL-MM-MIB::alert2StorageTemperatureProbeFailure,,,,,,Storage Temperature probe failure.
.1.3.6.1.4.1.674.10892.6.5.0.4210,DELL-MM-MIB::alert2StorageTemperatureProbeWarning,,,,,,Storage Temperature probe warning.
.1.3.6.1.4.1.674.10892.6.5.0.4211,DELL-MM-MIB::alert2StorageTemperatureProbeInformation,,,,,,Storage Temperature probe information.
.1.3.6.1.4.1.674.10892.6.5.0.4233,DELL-MM-MIB::alert2StoragePowerSupplyFailure,,,,,,Storage Power supply failure.
.1.3.6.1.4.1.674.10892.6.5.0.4234,DELL-MM-MIB::alert2StoragePowerSupplyWarning,,,,,,Storage Power supply warning.
.1.3.6.1.4.1.674.10892.6.5.0.4235,DELL-MM-MIB::alert2StoragePowerSupplyInformation,,,,,,Storage Power supply information.
.1.3.6.1.4.1.674.10892.6.5.0.4273,DELL-MM-MIB::alert2StorageBatteryFailure,,,,,,Storage Battery failure.
.1.3.6.1.4.1.674.10892.6.5.0.4274,DELL-MM-MIB::alert2StorageBatteryWarning,,,,,,Storage Battery warning.
.1.3.6.1.4.1.674.10892.6.5.0.4275,DELL-MM-MIB::alert2StorageBatteryInformation,,,,,,Storage Battery information.
.1.3.6.1.4.1.674.10892.6.5.0.4329,DELL-MM-MIB::alert2StorageControllerFailure,,,,,,Storage Controller failure.
.1.3.6.1.4.1.674.10892.6.5.0.4330,DELL-MM-MIB::alert2StorageControllerWarning,,,,,,Storage Controller warning.
.1.3.6.1.4.1.674.10892.6.5.0.4331,DELL-MM-MIB::alert2StorageControllerInformation,,,,,,Storage Controller information.
.1.3.6.1.4.1.674.10892.6.5.0.4337,DELL-MM-MIB::alert2StorageEnclosureFailure,,,,,,Storage Enclosure failure.
.1.3.6.1.4.1.674.10892.6.5.0.4338,DELL-MM-MIB::alert2StorageEnclosureWarning,,,,,,Storage Enclosure warning.
.1.3.6.1.4.1.674.10892.6.5.0.4339,DELL-MM-MIB::alert2StorageEnclosureInformation,,,,,,Storage Enclosure information.
.1.3.6.1.4.1.674.10892.6.5.0.4345,DELL-MM-MIB::alert2StoragePhysicalDiskFailure,,,,,,Storage Physical disk failure.
.1.3.6.1.4.1.674.10892.6.5.0.4346,DELL-MM-MIB::alert2StoragePhysicalDiskWarning,,,,,,Storage Physical disk warning.
.1.3.6.1.4.1.674.10892.6.5.0.4347,DELL-MM-MIB::alert2StoragePhysicalDiskInformation,,,,,,Storage Physical disk information.
.1.3.6.1.4.1.674.10892.6.5.0.4353,DELL-MM-MIB::alert2StorageVirtualDiskFailure,,,,,,Storage Virtual disk failure.
.1.3.6.1.4.1.674.10892.6.5.0.4354,DELL-MM-MIB::alert2StorageVirtualDiskWarning,,,,,,Storage Virtual disk warning.
.1.3.6.1.4.1.674.10892.6.5.0.4355,DELL-MM-MIB::alert2StorageVirtualDiskInformation,,,,,,Storage Virtual disk information.
.1.3.6.1.4.1.674.10892.6.5.0.4433,DELL-MM-MIB::alert2StorageSecurityFailure,,,,,,Storage Security failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.4434,DELL-MM-MIB::alert2StorageSecurityWarning,,,,,,Storage Security warning.
.1.3.6.1.4.1.674.10892.6.5.0.4435,DELL-MM-MIB::alert2StorageSecurityInformation,,,,,,Storage Security information.
.1.3.6.1.4.1.674.10892.6.5.0.6314,DELL-MM-MIB::alert2SoftwareChangeUpdateWarning,,,,,,Software change update warning.
.1.3.6.1.4.1.674.10892.6.5.0.8329,DELL-MM-MIB::alert2PowerSupplyAuditFailure,,,,,,Power Supply audit failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.8330,DELL-MM-MIB::alert2PowerSupplyAuditWarning,,,,,,Power Supply audit warning.
.1.3.6.1.4.1.674.10892.6.5.0.8361,DELL-MM-MIB::alert2SoftwareChangeAuditFailure,,,,,,Software change audit failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.8417,DELL-MM-MIB::alert2PowerUsageAuditFailure,,,,,,Power usage audit failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.8418,DELL-MM-MIB::alert2PowerUsageAuditWarning,,,,,,Power usage audit warning.
.1.3.6.1.4.1.674.10892.6.5.0.8419,DELL-MM-MIB::alert2PowerUsageAuditInformation,,,,,,Power usage audit information.
.1.3.6.1.4.1.674.10892.6.5.0.8513,DELL-MM-MIB::alert2LicenseFailure,,,,,,License failure.
.1.3.6.1.4.1.674.10892.6.5.0.8514,DELL-MM-MIB::alert2LicenseWarning,,,,,,License warning.
.1.3.6.1.4.1.674.10892.6.5.0.8515,DELL-MM-MIB::alert2LicenseInformation,,,,,,License information.
.1.3.6.1.4.1.674.10892.6.5.0.8562,DELL-MM-MIB::alert2PCIDeviceAuditWarning,,,,,,PCI device audit warning.
.1.3.6.1.4.1.674.10892.6.5.0.8689,DELL-MM-MIB::alert2CMCAuditFailure,,,,,,Chassis Management Module audit failure or critical event.
.1.3.6.1.4.1.674.10892.6.5.0.8690,DELL-MM-MIB::alert2CMCAuditWarning,,,,,,Chassis Management Module audit warning.
.1.3.6.1.4.1.674.10892.6.5.0.8691,DELL-MM-MIB::alert2CMCAuditInformation,,,,,,Chassis Management Module audit information.
.1.3.6.1.4.1.674.10892.6.5.0.8698,DELL-MM-MIB::alert2IOVirtualizationAuditWarning,,,,,,IO Virtualization audit warning.
.1.3.6.1.4.1.674.10892.6.5.0.10395,DELL-MM-MIB::alert2CMCTestTrap,,,,,,Test trap generated in response to a user request.
.1.3.6.1.4.1.674.10892.6.5.0.10529,DELL-MM-MIB::alert2SWCConfigurationFailure,,,,,,Software configuration failure.
.1.3.6.1.4.1.674.10892.6.5.0.10530,DELL-MM-MIB::alert2SWCConfigurationWarning,,,,,,Software configuration warning.
.1.3.6.1.4.1.674.10892.6.5.0.10611,DELL-MM-MIB::alert2PCIDeviceConfigurationInformation,,,,,,PCI device configuration information.
.1.3.6.1.4.1.674.10892.6.5.0.10746,DELL-MM-MIB::alert2IOVConfigurationWarning,,,,,,IO Virtualization configuration warning.
.1.3.6.1.4.1.674.10892.6.5.0.10747,DELL-MM-MIB::alert2IOVConfigurationInformation,,,,,,IO Virtualization configuration information.
.1.3.6.1.4.1.674.10892.6.5.1,DELL-MM-MIB::dmmChassisAlert2Variables,,,,,,
.1.3.6.1.4.1.674.10892.6.5.1.1,DELL-MM-MIB::dmmCA2MessageID,OCTET,read-only,,mandatory,,Message ID of the alert.
.1.3.6.1.4.1.674.10892.6.5.1.2,DELL-MM-MIB::dmmCA2Message,OCTET,read-only,,mandatory,,Message describing the alert.
.1.3.6.1.4.1.674.10892.6.5.1.3,DELL-MM-MIB::dmmCA2MessageArgs,OCTET,read-only,,mandatory,,Concatenated set of strings representing any message arguments that were used to construct the alert message. Each message argument string is enclosed in double quotes, and there is a comma after the ending double quote of each message argument string, except the last one. Any double quotes found within a message argument string were preprocessed and changed to single quotes.
.1.3.6.1.4.1.674.10892.6.5.1.4,DELL-MM-MIB::dmmCA2AlertStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Status of the alert.
.1.3.6.1.4.1.674.10892.6.5.1.5,DELL-MM-MIB::dmmCA2FQDD,OCTET,read-only,,mandatory,,Fully qualified device descriptor of device causing the alert.
.1.3.6.1.4.1.674.10892.6.6,DELL-MM-MIB::dmmGenericAlertGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.6.0,DELL-MM-MIB::dmmGenericAlertGroup#,,,,,,
.1.3.6.1.4.1.674.10892.6.6.0.100,DELL-MM-MIB::alertGenericCritical,,,,,,MM generic critical system alert.
.1.3.6.1.4.1.674.10892.6.6.0.200,DELL-MM-MIB::alertGenericWarning,,,,,,MM generic warning system alert.
.1.3.6.1.4.1.674.10892.6.6.0.300,DELL-MM-MIB::alertGenericNormal,,,,,,MM generic normal system alert.
.1.3.6.1.4.1.674.10892.6.6.0.400,DELL-MM-MIB::alertGenericInformational,,,,,,MM generic information system alert.
.1.3.6.1.4.1.674.10892.6.6.0.500,DELL-MM-MIB::alertGenericTestTrapEvent,,,,,,MM Generated a test trap event in response to a user request.
.1.3.6.1.4.1.674.10892.6.6.1,DELL-MM-MIB::dmmGenericAlertVariables,,,,,,
.1.3.6.1.4.1.674.10892.6.6.1.1,DELL-MM-MIB::dmmDeviceServiceTag,OCTET,read-only,,mandatory,,Service tag of the device.
.1.3.6.1.4.1.674.10892.6.7,DELL-MM-MIB-SMIv2::conformanceGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.7.1,DELL-MM-MIB-SMIv2::conformanceMIBGroups,,,,,,
.1.3.6.1.4.1.674.10892.6.7.1.1,DELL-MM-MIB-SMIv2::dmmProductInfoObjGroup,,,,,,A collection of objects providing information about the chassis management module.
.1.3.6.1.4.1.674.10892.6.7.1.2,DELL-MM-MIB-SMIv2::dmmFirmwareObjGroup,,,,,,A collection of objects providing information about the chassis firmware version.
.1.3.6.1.4.1.674.10892.6.7.1.3,DELL-MM-MIB-SMIv2::dmmStatusObjGroup,,,,,,Object is providing information about the overall chassis status.
.1.3.6.1.4.1.674.10892.6.7.1.4,DELL-MM-MIB-SMIv2::dmmStatusNowObjGroup,,,,,,A collection of objects providing information about the chassis subsystem status.
.1.3.6.1.4.1.674.10892.6.7.1.5,DELL-MM-MIB-SMIv2::dmmChassisPowerObjGroup,,,,,,A collection of objects providing information about the chassis Power.
.1.3.6.1.4.1.674.10892.6.7.1.6,DELL-MM-MIB-SMIv2::dmmPowerTableObjEntry,,,,,,A collection of objects providing information about the chassis Power Information.
.1.3.6.1.4.1.674.10892.6.7.1.7,DELL-MM-MIB-SMIv2::dmmPSUTableObjEntry,,,,,,A collection of objects providing information about the chassis Power Supply.
.1.3.6.1.4.1.674.10892.6.7.1.8,DELL-MM-MIB-SMIv2::dmmChassisAlert2VariablesObj,,,,,,A collection of objects providing information about the chassis Alerts.
.1.3.6.1.4.1.674.10892.6.7.1.9,DELL-MM-MIB-SMIv2::dmmGenericAlertVariablesObj,,,,,,A collection of objects providing information about the chassis Alerts.
.1.3.6.1.4.1.674.10892.6.7.2,DELL-MM-MIB-SMIv2::conformanceMIBnotificationGroup,,,,,,
.1.3.6.1.4.1.674.10892.6.7.2.1,DELL-MM-MIB-SMIv2::dmmChassisAlert2NotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to
.1.3.6.1.4.1.674.10892.6.7.2.2,DELL-MM-MIB-SMIv2::dmmGenericAlertNotificationGroup,,,,,,The two notifications which an SNMPv2 entity is required to implement.
.1.3.6.1.4.1.674.10893,StorageManagement-MIB::storage,,,,,,
.1.3.6.1.4.1.674.10893.1,StorageManagement-MIB::software,,,,,,
.1.3.6.1.4.1.674.10893.1.20,StorageManagement-MIB::storageManagement,,,,,,
.1.3.6.1.4.1.674.10893.1.20.1,StorageManagement-MIB::softwareVersion,OCTET,read-only,,mandatory,,Version number of the storage management component of the systems management software.
.1.3.6.1.4.1.674.10893.1.20.2,StorageManagement-MIB::globalStatus,INTEGER,read-only,,mandatory,critical(1):warning(2):normal(3):unknown(4),Global health information for the subsystem managed by
.1.3.6.1.4.1.674.10893.1.20.3,StorageManagement-MIB::softwareManufacturer,OCTET,read-only,,mandatory,,Manufacturer information for the Storage Management software.
.1.3.6.1.4.1.674.10893.1.20.4,StorageManagement-MIB::softwareProduct,OCTET,read-only,,mandatory,,Product information for the Storage Management software.
.1.3.6.1.4.1.674.10893.1.20.5,StorageManagement-MIB::softwareDescription,OCTET,read-only,,mandatory,,Product Description for the Storage Management software.
.1.3.6.1.4.1.674.10893.1.20.100,StorageManagement-MIB::storageManagementInfo,,,,,,
.1.3.6.1.4.1.674.10893.1.20.100.1,StorageManagement-MIB::displayName,OCTET,read-only,,mandatory,,Name of this management software for display purposes.
.1.3.6.1.4.1.674.10893.1.20.100.2,StorageManagement-MIB::description,OCTET,read-only,,mandatory,,A short description of this management software.
.1.3.6.1.4.1.674.10893.1.20.100.3,StorageManagement-MIB::agentVendor,OCTET,read-only,,mandatory,,The name of the management software manufacturer.
.1.3.6.1.4.1.674.10893.1.20.100.4,StorageManagement-MIB::agentVersion,OCTET,read-only,,obsolete,,This entry is obsolete. Refer to softwareVersion.
.1.3.6.1.4.1.674.10893.1.20.110,StorageManagement-MIB::globalData,,,,,,
.1.3.6.1.4.1.674.10893.1.20.110.1,StorageManagement-MIB::agentSystemGlobalStatus,INTEGER,read-only,,obsolete,normal(1):warning(2):nonCriticalError(3):failure(4):unknown(5),This entry is obsolete. Please use the value: agentGlobalSystemStatus.
.1.3.6.1.4.1.674.10893.1.20.110.2,StorageManagement-MIB::agentLastGlobalStatus,INTEGER,read-only,,obsolete,normal(1):warning(2):nonCriticalError(3):failure(4):unknown(5),This entry is obsolete. Please use the value: agentLastGlobalSystemStatus.
.1.3.6.1.4.1.674.10893.1.20.110.3,StorageManagement-MIB::agentTimeStamp,INTEGER,read-only,,mandatory,,The last time that the agent values have been updated.
.1.3.6.1.4.1.674.10893.1.20.110.4,StorageManagement-MIB::agentGetTimeout,INTEGER,read-only,,mandatory,,Suggested timeout value in milliseconds for how long 
.1.3.6.1.4.1.674.10893.1.20.110.5,StorageManagement-MIB::agentModifiers,INTEGER,read-only,,mandatory,,Agent functional modifiers, when set the modifier is active.
.1.3.6.1.4.1.674.10893.1.20.110.6,StorageManagement-MIB::agentRefreshRate,INTEGER,read-only,,mandatory,,The rate, given in seconds, at which the cached data for SNMP is refreshed.
.1.3.6.1.4.1.674.10893.1.20.110.7,StorageManagement-MIB::agentHostname,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.110.8,StorageManagement-MIB::agentIPAddress,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.110.9,StorageManagement-MIB::agentSoftwareStatus,INTEGER,read-only,,obsolete,databaseUp(1):databaseDown(2),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.110.10,StorageManagement-MIB::agentSnmpVersion,OCTET,read-only,,obsolete,,This entry is obsolete. Refer to softwareVersion.
.1.3.6.1.4.1.674.10893.1.20.110.11,StorageManagement-MIB::agentMibVersion,OCTET,read-only,,mandatory,,Version of the Storage Management MIB.
.1.3.6.1.4.1.674.10893.1.20.110.12,StorageManagement-MIB::agentManagementSoftwareURLName,OCTET,read-only,,mandatory,,The Universal Resource Locator (URL) of the systems management software.
.1.3.6.1.4.1.674.10893.1.20.110.13,StorageManagement-MIB::agentGlobalSystemStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Global health information for the subsystem managed by
.1.3.6.1.4.1.674.10893.1.20.110.14,StorageManagement-MIB::agentLastGlobalSystemStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The previous global status of the system managed by the Storage Management software.
.1.3.6.1.4.1.674.10893.1.20.110.15,StorageManagement-MIB::agentSmartThermalShutdown,INTEGER,read-only,,mandatory,enabled(1):disabled(2):notApplicable(3),Indicates the status of smart thermal shutdown for PV220S and PV221S enclosures.
.1.3.6.1.4.1.674.10893.1.20.130,StorageManagement-MIB::physicalDevices,,,,,,
.1.3.6.1.4.1.674.10893.1.20.130.1,StorageManagement-MIB::controllerTable,,not-accessible,,mandatory,,A table of managed RAID controllers. The number of entries
.1.3.6.1.4.1.674.10893.1.20.130.1.1,StorageManagement-MIB::controllerEntry,,not-accessible,controllerNumber,mandatory,,An entry in the table of RAID controllers. A row in this table cannot
.1.3.6.1.4.1.674.10893.1.20.130.1.1.1,StorageManagement-MIB::controllerNumber,INTEGER,read-only,,mandatory,,Instance number of this controller entry.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.2,StorageManagement-MIB::controllerName,OCTET,read-only,,mandatory,,The name of the controller in this subsystem as represented in Storage Management. 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.3,StorageManagement-MIB::controllerVendor,OCTET,read-only,,mandatory,,The controller's (re)seller's name.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.4,StorageManagement-MIB::controllerType,INTEGER,read-only,,mandatory,scsi(1):pv660F(2):pv662F(3):ide(4):sata(5):sas(6):pciessd(9),The type of this controller:
.1.3.6.1.4.1.674.10893.1.20.130.1.1.5,StorageManagement-MIB::controllerState,INTEGER,read-only,,mandatory,ready(1):failed(2):online(3):offline(4):degraded(6),The current condition of the controller's subsystem 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.6,StorageManagement-MIB::controllerSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.7,StorageManagement-MIB::controllerRebuildRateInPercent,INTEGER,read-only,,mandatory,,The percent of the compute cycles dedicated to rebuilding 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.8,StorageManagement-MIB::controllerFWVersion,OCTET,read-only,,mandatory,,The controller's current firmware version.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.9,StorageManagement-MIB::controllerCacheSizeInMB,INTEGER,read-only,,mandatory,,The controller's current amount of cache memory in megabytes. 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.10,StorageManagement-MIB::controllerCacheSizeInBytes,INTEGER,read-only,,mandatory,,The controller's current amount of cache memory that is less than a megabyte. This combined with the 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.11,StorageManagement-MIB::controllerPhysicalDeviceCount,INTEGER,read-only,,mandatory,,Number of physical devices on the controller channel including both disks and the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.12,StorageManagement-MIB::controllerLogicalDeviceCount,INTEGER,read-only,,mandatory,,Number of virtual disks on the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.13,StorageManagement-MIB::controllerPartnerStatus,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.14,StorageManagement-MIB::controllerHostPortCount,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.15,StorageManagement-MIB::controllerMemorySizeInMB,INTEGER,read-only,,mandatory,,Size of memory in megabytes on the controller. If this size is 0, it is less than a megabyte. This attribute is only supported on Adaptec controllers. 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.16,StorageManagement-MIB::controllerMemorySizeInBytes,INTEGER,read-only,,mandatory,,Size of memory on the controller that is less than a megabyte. This combined with the controllerMemorySizeInMB
.1.3.6.1.4.1.674.10893.1.20.130.1.1.17,StorageManagement-MIB::controllerDriveChannelCount,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.18,StorageManagement-MIB::controllerFaultTolerant,INTEGER,read-only,,mandatory,yes(1),This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.19,StorageManagement-MIB::controllerC0Port0WWN,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.20,StorageManagement-MIB::controllerC0Port0Name,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.21,StorageManagement-MIB::controllerC0Port0ID,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.22,StorageManagement-MIB::controllerC0Target,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.23,StorageManagement-MIB::controllerC0Channel,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.24,StorageManagement-MIB::controllerC0OSController,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.25,StorageManagement-MIB::controllerC0BatteryState,INTEGER,read-only,,obsolete,ok(1):failed(2):reconditioning(7):high(9):low(10):charging(12):missing(21),This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.26,StorageManagement-MIB::controllerC1Port0WWN,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.27,StorageManagement-MIB::controllerC1Port0Name,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.28,StorageManagement-MIB::controllerC1Port0ID,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.29,StorageManagement-MIB::controllerC1Target,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.30,StorageManagement-MIB::controllerC1Channel,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.31,StorageManagement-MIB::controllerC1OSController,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.32,StorageManagement-MIB::controllerC1BatteryState,INTEGER,read-only,,obsolete,ok(1):failed(2):reconditioning(7):high(9):low(10):charging(12):missing(21),This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.33,StorageManagement-MIB::controllerNodeWWN,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.34,StorageManagement-MIB::controllerC0Port1WWN,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.35,StorageManagement-MIB::controllerC1Port1WWN,OCTET,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.36,StorageManagement-MIB::controllerBatteryChargeCount,INTEGER,read-only,,obsolete,,This entry is obsolete.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.37,StorageManagement-MIB::controllerRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the controller state. 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.38,StorageManagement-MIB::controllerComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the controller itself without the 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.39,StorageManagement-MIB::controllerNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.40,StorageManagement-MIB::controllerAlarmState,INTEGER,read-only,,mandatory,enabled(1):disabled(2):not-applicable(3),State, or setting for the controller's alarm.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.41,StorageManagement-MIB::controllerDriverVersion,OCTET,read-only,,mandatory,,Currently installed driver version for this controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.42,StorageManagement-MIB::controllerPCISlot,OCTET,read-only,,mandatory,,The PCI slot number or embedded number for controllers on the motherboard.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.43,StorageManagement-MIB::controllerClusterMode,INTEGER,read-only,,mandatory,enabled(1):disabled(2):active(3):notApplicable(99),Identifies if the controller is in cluster mode.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.44,StorageManagement-MIB::controllerMinFWVersion,OCTET,read-only,,mandatory,,The minimum firmware version for Storage Management to support the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.45,StorageManagement-MIB::controllerMinDriverVersion,OCTET,read-only,,mandatory,,The minimum driver version for Storage Management to support the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.46,StorageManagement-MIB::controllerSCSIInitiatorID,INTEGER,read-only,,mandatory,,The SCSI ID of the initiator.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.47,StorageManagement-MIB::controllerChannelCount,INTEGER,read-only,,mandatory,,Number of channels on the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.48,StorageManagement-MIB::controllerReconstructRate,INTEGER,read-only,,mandatory,,The rate for reconstruct on the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.49,StorageManagement-MIB::controllerPatrolReadRate,INTEGER,read-only,,mandatory,,The rate for patrol read on the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.50,StorageManagement-MIB::controllerBGIRate,INTEGER,read-only,,mandatory,,The rate for background initialization on the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.51,StorageManagement-MIB::controllerCheckConsistencyRate,INTEGER,read-only,,mandatory,,The rate for check consistency on the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.52,StorageManagement-MIB::controllerPatrolReadMode,INTEGER,read-only,,mandatory,automatic(1):manual(2):disabled(3),Identifies the patrol read mode.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.53,StorageManagement-MIB::controllerPatrolReadState,INTEGER,read-only,,mandatory,stopped(1):ready(2):active(4):aborted(8),The state of the patrol read.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.54,StorageManagement-MIB::controllerPatrolReadIterations,INTEGER,read-only,,mandatory,,The number of times Patrol Read has been run on this controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.55,StorageManagement-MIB::controllerStorportDriverVersion,OCTET,read-only,,mandatory,,Provide current Windows OS storport driver version. Not applicable for Linux.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.56,StorageManagement-MIB::controllerMinRequiredStorportVer,OCTET,read-only,,mandatory,,Provides minimum required storport driver version for Windows OS only. 
.1.3.6.1.4.1.674.10893.1.20.130.1.1.57,StorageManagement-MIB::controllerEncryptionCapable,INTEGER,read-only,,mandatory,,Indicates Encryption capability of the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.58,StorageManagement-MIB::controllerEncryptionKeyPresent,INTEGER,read-write,,mandatory,,Indicates presence of Encryption Key for the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.59,StorageManagement-MIB::controllerPersistentHotSpare,INTEGER,read-only,,mandatory,,Indicates Persistent Hot Spare capability of the controller
.1.3.6.1.4.1.674.10893.1.20.130.1.1.60,StorageManagement-MIB::controllerSpinDownUnconfiguredDrives,INTEGER,read-only,,mandatory,,Indicates controller capability to put unconfigured drives in power save mode.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.61,StorageManagement-MIB::controllerSpinDownHotSpareDrives,INTEGER,read-only,,mandatory,,Indicates controller capability to put hot spare drives in power save mode.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.62,StorageManagement-MIB::controllerSpinDownTimeInterval,INTEGER,read-write,,mandatory,,Shows the duration in minutes after which, the unconfigured or hot spare drives will be spun down to power save mode.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.63,StorageManagement-MIB::controllerEncryptionMode,INTEGER,read-only,,mandatory,,Indicates the current encryption mode of the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.64,StorageManagement-MIB::controllerCacheCade,INTEGER,read-only,,mandatory,,Indicates if the controller is CacheCade capable or not.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.65,StorageManagement-MIB::controllerSpinDownConfiguredDrives,INTEGER,read-only,,mandatory,,Indicates controller capability to spin down configured physical disks.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.66,StorageManagement-MIB::controllerAutomaticPowerSaving,INTEGER,read-only,,mandatory,,Indicates controller capability for automatic power saving.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.67,StorageManagement-MIB::controllerConfiguredDrivesSpinUpTime,OCTET,read-only,,mandatory,,Indicates configured drives spin up start time.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.68,StorageManagement-MIB::controllerConfiguredDrivesSpinUpTimeInterval,INTEGER,read-only,,mandatory,,Indicates configured drives spin up time interval in hours. This value is added with configured drives start time to arrive at time window in which configured drives are always spin up.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.69,StorageManagement-MIB::controllerPreservedCache,INTEGER,read-only,,mandatory,,Indicates if preserved cache is present on the controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.70,StorageManagement-MIB::controllerPIEnable,INTEGER,read-only,,mandatory,,Indicates if T10 PI is enabled on a controller.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.71,StorageManagement-MIB::controllerCurrentMode,OCTET,read-only,,mandatory,,Shows the current controller mode.
.1.3.6.1.4.1.674.10893.1.20.130.1.1.72,StorageManagement-MIB::frontChassisSlot,INTEGER,read-only,,mandatory,,Shows the physical slot on the chassis for stash .
.1.3.6.1.4.1.674.10893.1.20.130.1.1.73,StorageManagement-MIB::controllerInstance,INTEGER,read-only,,mandatory,,Shows the current instance of the controller for stash .
.1.3.6.1.4.1.674.10893.1.20.130.1.1.74,StorageManagement-MIB::controllerNonRAIDdiskCachePolicy,OCTET,read-only,,mandatory,,Displays the current disk write cache policy for Non-RAID disks.
.1.3.6.1.4.1.674.10893.1.20.130.2,StorageManagement-MIB::channelTable,,not-accessible,,mandatory,,A table of controller channels. The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.2.1,StorageManagement-MIB::channelEntry,,not-accessible,channelNumber,mandatory,,An entry in the channel table. A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.2.1.1,StorageManagement-MIB::channelNumber,INTEGER,read-only,,mandatory,,Instance number of this channel entry.
.1.3.6.1.4.1.674.10893.1.20.130.2.1.2,StorageManagement-MIB::channelName,OCTET,read-only,,mandatory,,The name of the channel as represented in Storage Management. 
.1.3.6.1.4.1.674.10893.1.20.130.2.1.3,StorageManagement-MIB::channelState,INTEGER,read-only,,mandatory,ready(1):failed(2):online(3):offline(4):degraded(6),The current condition of the channel.
.1.3.6.1.4.1.674.10893.1.20.130.2.1.4,StorageManagement-MIB::channelSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.2.1.5,StorageManagement-MIB::channelTermination,INTEGER,read-only,,mandatory,wide(1):narrow(2):notTerminated(3),The type of SCSI termination on this channel. 
.1.3.6.1.4.1.674.10893.1.20.130.2.1.6,StorageManagement-MIB::channelSCSIID,INTEGER,read-only,,mandatory,,The SCSI ID of the controller to which the channel belongs.
.1.3.6.1.4.1.674.10893.1.20.130.2.1.7,StorageManagement-MIB::channelRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the channel state.
.1.3.6.1.4.1.674.10893.1.20.130.2.1.8,StorageManagement-MIB::channelComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the channel itself with out without the 
.1.3.6.1.4.1.674.10893.1.20.130.2.1.9,StorageManagement-MIB::channelNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this channel.
.1.3.6.1.4.1.674.10893.1.20.130.2.1.10,StorageManagement-MIB::channelDataRate,OCTET,read-only,,mandatory,,The data rate (SCSI speed) of the channel. Example: Ultra 320M SCSI
.1.3.6.1.4.1.674.10893.1.20.130.2.1.11,StorageManagement-MIB::channelBusType,INTEGER,read-only,,mandatory,scsi(1):ide(2):fibreChannel(3):ssa(4):usb(6):sata(7):sas(8):pcie(9),The bus type of the channel.
.1.3.6.1.4.1.674.10893.1.20.130.3,StorageManagement-MIB::enclosureTable,,not-accessible,,mandatory,,A table of managed Enclosures. The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.3.1,StorageManagement-MIB::enclosureEntry,,not-accessible,enclosureNumber,mandatory,,An entry in the Enclosure table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.3.1.1,StorageManagement-MIB::enclosureNumber,INTEGER,read-only,,mandatory,,Instance number of the enclosure entry.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.2,StorageManagement-MIB::enclosureName,OCTET,read-only,,mandatory,,The enclosure's name as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.3,StorageManagement-MIB::enclosureVendor,OCTET,read-only,,mandatory,,The enclosure's (re)seller's name.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.4,StorageManagement-MIB::enclosureState,INTEGER,read-only,,mandatory,ready(1):failed(2):online(3):offline(4):degraded(6),The current condition of the enclosure
.1.3.6.1.4.1.674.10893.1.20.130.3.1.5,StorageManagement-MIB::enclosureSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.6,StorageManagement-MIB::enclosureID,OCTET,read-only,,mandatory,,Represents unique id for an enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.7,StorageManagement-MIB::enclosureProcessorVersion,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.8,StorageManagement-MIB::enclosureServiceTag,OCTET,read-only,,mandatory,,Enclosure identification used when consulting customer support.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.9,StorageManagement-MIB::enclosureAssetTag,OCTET,read-only,,mandatory,,User definable asset tag for the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.10,StorageManagement-MIB::enclosureAssetName,OCTET,read-only,,mandatory,,User definable asset name of the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.11,StorageManagement-MIB::enclosureSplitBusPartNumber,OCTET,read-only,,mandatory,,The enclosure's split bus part number.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.12,StorageManagement-MIB::enclosureProductID,OCTET,read-only,,mandatory,,The enclosure's product identification. This also corresponds to the enclosure type. 
.1.3.6.1.4.1.674.10893.1.20.130.3.1.13,StorageManagement-MIB::enclosureKernelVersion,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.14,StorageManagement-MIB::enclosureESM1PartNumber,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.15,StorageManagement-MIB::enclosureESM2PartNumber,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.16,StorageManagement-MIB::enclosureType,INTEGER,read-only,,mandatory,internal(1):dELLPV200SPV201S(2):dELLPV210SPV211S(3):dELLPV220SPV221S(4):dELLPV660F(5):dELLPV224F(6):dELLPV660F224F(7):md1000(8):md1120(9):md1200(10):md1220(11):md1400(12):md1420(13):mx5016s(14),The type of this enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.17,StorageManagement-MIB::enclosureProcessor2Version,OCTET,read-only,,mandatory,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.18,StorageManagement-MIB::enclosureConfig,INTEGER,read-only,,mandatory,joined(1):splitBus(2):clustered(3):unified(4),The current configuration of the enclosure's backplane.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.19,StorageManagement-MIB::enclosureChannelNumber,INTEGER,read-only,,mandatory,,The channel number, or bus, to which the enclosure is connected.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.20,StorageManagement-MIB::enclosureAlarm,INTEGER,read-only,,mandatory,disabled(1):enabled(2),The current status of the enclosure's alarm (PV220S, and PV221S only.)
.1.3.6.1.4.1.674.10893.1.20.130.3.1.21,StorageManagement-MIB::enclosureBackplanePartNumber,OCTET,read-only,,mandatory,,The part number of the enclosure's backplane.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.22,StorageManagement-MIB::enclosureSCSIID,INTEGER,read-only,,mandatory,,The SCSI ID of the controller to which this enclosure is attached.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.23,StorageManagement-MIB::enclosureRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the enclosure state.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.24,StorageManagement-MIB::enclosureComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure itself without the 
.1.3.6.1.4.1.674.10893.1.20.130.3.1.25,StorageManagement-MIB::enclosureNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.26,StorageManagement-MIB::enclosureFirmwareVersion,OCTET,read-only,,mandatory,,The firmware version of the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.27,StorageManagement-MIB::enclosureSCSIRate,OCTET,read-only,,mandatory,,Actual SCSI rate in the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.28,StorageManagement-MIB::enclosurePartNumber,OCTET,read-only,,mandatory,,The part number of the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.29,StorageManagement-MIB::enclosureSerialNumber,OCTET,read-only,,mandatory,,Serial number of the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.30,StorageManagement-MIB::enclosureSASAddress,OCTET,read-only,,mandatory,,The specified SAS address if this is a SAS enclosure. 
.1.3.6.1.4.1.674.10893.1.20.130.3.1.31,StorageManagement-MIB::enclosureOccupiedSlotCount,INTEGER,read-only,,mandatory,,Shows the number of physical disk slots occupied in a storage enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.32,StorageManagement-MIB::enclosureTotalSlots,INTEGER,read-only,,mandatory,,Shows the total number of physical slots in a storage enclosure; it includes total count of occupied and empty slots.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.33,StorageManagement-MIB::enclosureEmptySlotCount,INTEGER,read-only,,mandatory,,Shows the number of empty physical disk slots in a storage enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.3.1.34,StorageManagement-MIB::enclosureExpressServiceCode,OCTET,read-only,,mandatory,,Express Service Code (ESC) is base10 converted numerical value of service tag.
.1.3.6.1.4.1.674.10893.1.20.130.4,StorageManagement-MIB::arrayDiskTable,,not-accessible,,mandatory,,A table of managed Array Disks. The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.4.1,StorageManagement-MIB::arrayDiskEntry,,not-accessible,arrayDiskNumber,mandatory,,An entry in the Array Disk table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.4.1.1,StorageManagement-MIB::arrayDiskNumber,INTEGER,read-only,,mandatory,,Instance number of this array disk entry.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.2,StorageManagement-MIB::arrayDiskName,OCTET,read-only,,mandatory,,The name of the array disk as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.3,StorageManagement-MIB::arrayDiskVendor,OCTET,read-only,,mandatory,,The array disk's manufacturer's name.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.4,StorageManagement-MIB::arrayDiskState,INTEGER,read-only,,mandatory,ready(1):failed(2):online(3):offline(4):degraded(6):recovering(7):removed(11):non-raid(13):notReady(14):resynching(15):replacing(22):spinningDown(23):rebuild(24):noMedia(25):formatting(26):diagnostics(28):predictiveFailure(34):initializing(35):foreign(39):clear(40):unsupported(41):incompatible(53):readOnly(56),The current condition of the array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.5,StorageManagement-MIB::arrayDiskSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.6,StorageManagement-MIB::arrayDiskProductID,OCTET,read-only,,mandatory,,The model number of the array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.7,StorageManagement-MIB::arrayDiskSerialNo,OCTET,read-only,,mandatory,,The array disk's unique identification number from the manufacturer.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.8,StorageManagement-MIB::arrayDiskRevision,OCTET,read-only,,mandatory,,The firmware version of the array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.9,StorageManagement-MIB::arrayDiskEnclosureID,OCTET,read-only,,mandatory,,The SCSI ID of the enclosure processor to which this array disk belongs.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.10,StorageManagement-MIB::arrayDiskChannel,INTEGER,read-only,,mandatory,,The bus to which this array disk is connected.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.11,StorageManagement-MIB::arrayDiskLengthInMB,INTEGER,read-only,,mandatory,,The size in megabytes of the array disk. If this size is 0, it is smaller than a megabyte.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.12,StorageManagement-MIB::arrayDiskLengthInBytes,INTEGER,read-only,,mandatory,,The size of the array disk in bytes that is less than 
.1.3.6.1.4.1.674.10893.1.20.130.4.1.13,StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB,INTEGER,read-only,,mandatory,,The size in megabytes of the largest contiguous free space
.1.3.6.1.4.1.674.10893.1.20.130.4.1.14,StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes,INTEGER,read-only,,mandatory,,The size of the largest contiguous free space on this
.1.3.6.1.4.1.674.10893.1.20.130.4.1.15,StorageManagement-MIB::arrayDiskTargetID,INTEGER,read-only,,mandatory,,The SCSI target ID which this array disk is assigned. 
.1.3.6.1.4.1.674.10893.1.20.130.4.1.16,StorageManagement-MIB::arrayDiskLunID,INTEGER,read-only,,mandatory,,The array disk's logical unit number. 
.1.3.6.1.4.1.674.10893.1.20.130.4.1.17,StorageManagement-MIB::arrayDiskUsedSpaceInMB,INTEGER,read-only,,mandatory,,The amount in megabytes of the used space on the array
.1.3.6.1.4.1.674.10893.1.20.130.4.1.18,StorageManagement-MIB::arrayDiskUsedSpaceInBytes,INTEGER,read-only,,mandatory,,The size in bytes of the used space on the array disk
.1.3.6.1.4.1.674.10893.1.20.130.4.1.19,StorageManagement-MIB::arrayDiskFreeSpaceInMB,INTEGER,read-only,,mandatory,,The amount in megabytes of the free space on the array
.1.3.6.1.4.1.674.10893.1.20.130.4.1.20,StorageManagement-MIB::arrayDiskFreeSpaceInBytes,INTEGER,read-only,,mandatory,,The size in bytes of the free space on the array disk
.1.3.6.1.4.1.674.10893.1.20.130.4.1.21,StorageManagement-MIB::arrayDiskBusType,INTEGER,read-only,,mandatory,scsi(1):ide(2):fibre(3):ssa(4):usb(6):sata(7):sas(8):pcie(9),The bus type of the array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.22,StorageManagement-MIB::arrayDiskSpareState,INTEGER,read-only,,mandatory,memberVD(1):memberDG(2):globalHotSpare(3):dedicatedHotSpare(4):notASpare(5):notApplicable(99),The status of the array disk as a spare.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.23,StorageManagement-MIB::arrayDiskRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the array disk state.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.24,StorageManagement-MIB::arrayDiskComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the array disk itself without the 
.1.3.6.1.4.1.674.10893.1.20.130.4.1.25,StorageManagement-MIB::arrayDiskDeviceName,OCTET,read-only,,mandatory,,The operating system device name for this disk. This property is only applicable to array disks attached to a RAID controller.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.26,StorageManagement-MIB::arrayDiskNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.27,StorageManagement-MIB::arrayDiskPartNumber,OCTET,read-only,,mandatory,,The part number of the disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.28,StorageManagement-MIB::arrayDiskSASAddress,OCTET,read-only,,mandatory,,The specified SAS address if this is a SAS disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.29,StorageManagement-MIB::arrayDiskNegotiatedSpeed,INTEGER,read-only,,mandatory,,The speed at which the drive is actually running in MPS (megabytes per second).
.1.3.6.1.4.1.674.10893.1.20.130.4.1.30,StorageManagement-MIB::arrayDiskCapableSpeed,INTEGER,read-only,,mandatory,,The maximum speed at which the drive is capable of negotiating in MPS (megabytes per second).
.1.3.6.1.4.1.674.10893.1.20.130.4.1.31,StorageManagement-MIB::arrayDiskSmartAlertIndication,INTEGER,read-only,,mandatory,no(1):yes(2),Indicated whether the disk has received a predictive failure.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.32,StorageManagement-MIB::arrayDiskManufactureDay,OCTET,read-only,,mandatory,,The day of the week (1=Sunday thru 7=Saturday) on which this disk was manufactured.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.33,StorageManagement-MIB::arrayDiskManufactureWeek,OCTET,read-only,,mandatory,,The week (1 thru 53) in which this disk was manufactured.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.34,StorageManagement-MIB::arrayDiskManufactureYear,OCTET,read-only,,mandatory,,The four digit year in which this disk was manufactured.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.35,StorageManagement-MIB::arrayDiskMediaType,INTEGER,read-only,,mandatory,unknown(1):hdd(2):ssd(3),The Media type of the array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.36,StorageManagement-MIB::arrayDiskDellCertified,INTEGER,read-only,,mandatory,,Indicates if array disk is certified by Dell.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.37,StorageManagement-MIB::arrayDiskAltaVendorId,OCTET,read-only,,obsolete,,Provides vendor information for Alta interposer.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.38,StorageManagement-MIB::arrayDiskAltaProductId,OCTET,read-only,,obsolete,,Provides product id for Alta interposer.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.39,StorageManagement-MIB::arrayDiskAltaRevisionId,OCTET,read-only,,obsolete,,Provides revision id for Alta interposer.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.40,StorageManagement-MIB::arrayDiskEncryptionCapable,INTEGER,read-only,,mandatory,,Indicates if physical disk is Encryption capable.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.41,StorageManagement-MIB::arrayDiskEncrypted,INTEGER,read-only,,mandatory,,Indicates if the physical disk has encryption enabled.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.42,StorageManagement-MIB::arrayDiskPowerState,INTEGER,read-only,,mandatory,,Indicates power state of a physical drive.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.43,StorageManagement-MIB::arrayDiskDriveWriteCache,INTEGER,read-only,,mandatory,,Indicates drive write cache capability for PCIe SSD devices.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.44,StorageManagement-MIB::arrayDiskModelNumber,OCTET,read-only,,mandatory,,Provides PCIe SSD device model number.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.45,StorageManagement-MIB::arrayDiskLifeRemaining,INTEGER,read-only,,mandatory,,Provides PCIe SSD device life remaining in percentage.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.46,StorageManagement-MIB::arrayDiskDriverVersion,OCTET,read-only,,mandatory,,Provides PCIe SSD device driver version.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.47,StorageManagement-MIB::arrayDiskDeviceLifeStatus,INTEGER,read-only,,mandatory,,Provides PCIe SSD device life status.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.48,StorageManagement-MIB::arrayDiskReadOnly,OCTET,read-only,,mandatory,,Provides PCIe SSD's Read Only attribute.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.49,StorageManagement-MIB::arrayDiskRemainingRatedWriteEndurance,OCTET,read-only,,mandatory,,Provides PCIe SSD device Remaining Rated Write Endurance
.1.3.6.1.4.1.674.10893.1.20.130.4.1.50,StorageManagement-MIB::arrayDiskSectorSize,INTEGER,read-only,,mandatory,,Provides the information regarding sector size of array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.51,StorageManagement-MIB::arrayDiskPICapable,INTEGER,read-only,,mandatory,,Provides the information regarding T10 PI capability of Array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.52,StorageManagement-MIB::arrayDiskMaxLinkWidth,INTEGER,read-only,,mandatory,,Provides the information regarding Max Link Width of Array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.53,StorageManagement-MIB::arrayDiskNegotiatedLinkWidth,INTEGER,read-only,,mandatory,,Provides the information regarding Negtioated Link Width of Array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.54,StorageManagement-MIB::nonRAIDdiskCachePolicy,OCTET,read-only,,mandatory,,Displays the current disk write cache policy of the NonRAID disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.55,StorageManagement-MIB::arraydiskCachePolicy,OCTET,read-only,,mandatory,,Displays the current disk write cache policy of the array disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.56,StorageManagement-MIB::arraydiskISECapable,INTEGER,read-only,,mandatory,,A boolean value depicitng if the disk is Instant Secure Erase Capable or not.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.57,StorageManagement-MIB::arraydiskWWN,OCTET,read-only,,mandatory,,Displays WWN for a disk.
.1.3.6.1.4.1.674.10893.1.20.130.4.1.58,StorageManagement-MIB::arraydiskEncryptionProtocol,INTEGER,read-only,,mandatory,,Displays Encrption Protocol for a disk. 
.1.3.6.1.4.1.674.10893.1.20.130.5,StorageManagement-MIB::arrayDiskEnclosureConnectionTable,,not-accessible,,mandatory,,A table of the connections between array disks, their enclosure, 
.1.3.6.1.4.1.674.10893.1.20.130.5.1,StorageManagement-MIB::arrayDiskEnclosureConnectionEntry,,not-accessible,arrayDiskEnclosureConnectionNumber,mandatory,,An entry in the Array Disk Enclosure Connection table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.5.1.1,StorageManagement-MIB::arrayDiskEnclosureConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this array disk connection entry.
.1.3.6.1.4.1.674.10893.1.20.130.5.1.2,StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName,OCTET,read-only,,mandatory,,The name of the array disk in this connection as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.5.1.3,StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber,INTEGER,read-only,,mandatory,,The instance number of the array disk in the arrayDiskTable
.1.3.6.1.4.1.674.10893.1.20.130.5.1.4,StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName,OCTET,read-only,,mandatory,,The name of the enclosure as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.5.1.5,StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber,INTEGER,read-only,,mandatory,,The instance number in the enclosureTable of the enclosure 
.1.3.6.1.4.1.674.10893.1.20.130.5.1.6,StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName,OCTET,read-only,,mandatory,,The name of the controller as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.5.1.7,StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber,INTEGER,read-only,,mandatory,,The instance number in the controllerTable of the controller 
.1.3.6.1.4.1.674.10893.1.20.130.6,StorageManagement-MIB::arrayDiskChannelConnectionTable,,not-accessible,,mandatory,,A table of the connections between array disks, their channel, and 
.1.3.6.1.4.1.674.10893.1.20.130.6.1,StorageManagement-MIB::arrayDiskChannelConnectionEntry,,not-accessible,arrayDiskChannelConnectionNumber,mandatory,,An entry in the Array Disk Channel Connection table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.6.1.1,StorageManagement-MIB::arrayDiskChannelConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this array disk connection entry.
.1.3.6.1.4.1.674.10893.1.20.130.6.1.2,StorageManagement-MIB::arrayDiskChannelConnectionArrayDiskName,OCTET,read-only,,mandatory,,The name of the array disk in this connection
.1.3.6.1.4.1.674.10893.1.20.130.6.1.3,StorageManagement-MIB::arrayDiskChannelConnectionArrayDiskNumber,INTEGER,read-only,,mandatory,,The instance number of the array disk in the arrayDiskTable
.1.3.6.1.4.1.674.10893.1.20.130.6.1.4,StorageManagement-MIB::arrayDiskChannelConnectionChannelName,OCTET,read-only,,mandatory,,The name of the channel as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.6.1.5,StorageManagement-MIB::arrayDiskChannelConnectionChannelNumber,INTEGER,read-only,,mandatory,,The instance number of the channel in the channelTable to 
.1.3.6.1.4.1.674.10893.1.20.130.6.1.6,StorageManagement-MIB::arrayDiskChannelConnectionControllerName,OCTET,read-only,,mandatory,,The name of the controller as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.6.1.7,StorageManagement-MIB::arrayDiskChannelConnectionControllerNumber,INTEGER,read-only,,mandatory,,The instance number in the controllerTable of the controller 
.1.3.6.1.4.1.674.10893.1.20.130.7,StorageManagement-MIB::fanTable,,not-accessible,,mandatory,,A table of managed Fans. The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.7.1,StorageManagement-MIB::fanEntry,,not-accessible,fanNumber,mandatory,,An entry in the Fan table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.7.1.1,StorageManagement-MIB::fanNumber,INTEGER,read-only,,mandatory,,Instance number of this fan entry.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.2,StorageManagement-MIB::fanName,OCTET,read-only,,mandatory,,The fan's name as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.3,StorageManagement-MIB::fanVendor,OCTET,read-only,,mandatory,,The fan's (re)seller's name.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.4,StorageManagement-MIB::fanState,INTEGER,read-only,,mandatory,ready(1):failed(2):degraded(6):removed(11):missing(21),The current condition of the fan.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.5,StorageManagement-MIB::fanSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.6,StorageManagement-MIB::fanProbeUnit,OCTET,read-only,,obsolete,,This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.7,StorageManagement-MIB::fanProbeMinWarning,OCTET,read-only,,obsolete,,This entry is obsolete. This setting is not supported
.1.3.6.1.4.1.674.10893.1.20.130.7.1.8,StorageManagement-MIB::fanProbeMinCritical,OCTET,read-only,,obsolete,,This entry is obsolete. This setting is not supported
.1.3.6.1.4.1.674.10893.1.20.130.7.1.9,StorageManagement-MIB::fanProbeMaxWarning,OCTET,read-only,,obsolete,,This entry is obsolete. This setting is not supported
.1.3.6.1.4.1.674.10893.1.20.130.7.1.10,StorageManagement-MIB::fanProbeMaxCritical,OCTET,read-only,,obsolete,,This entry is obsolete. This setting is not supported
.1.3.6.1.4.1.674.10893.1.20.130.7.1.11,StorageManagement-MIB::fanProbeCurrValue,OCTET,read-only,,mandatory,,The current speed of the fan.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.12,StorageManagement-MIB::fan1PartNumber,OCTET,read-only,,mandatory,,The part number of the fan in the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.13,StorageManagement-MIB::fan2PartNumber,OCTET,read-only,,obsolete,,This entry is obsolete. This setting is not supported
.1.3.6.1.4.1.674.10893.1.20.130.7.1.14,StorageManagement-MIB::fanRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the fan state.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.15,StorageManagement-MIB::fanComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the fan itself without the 
.1.3.6.1.4.1.674.10893.1.20.130.7.1.16,StorageManagement-MIB::fanNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this fan.
.1.3.6.1.4.1.674.10893.1.20.130.7.1.17,StorageManagement-MIB::fanRevision,OCTET,read-only,,mandatory,,The revision number of the fan in the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.8,StorageManagement-MIB::fanConnectionTable,,not-accessible,,mandatory,,A table of the connections between each fan on 
.1.3.6.1.4.1.674.10893.1.20.130.8.1,StorageManagement-MIB::fanConnectionEntry,,not-accessible,fanConnectionNumber,mandatory,,An entry in the Fan Connection table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.8.1.1,StorageManagement-MIB::fanConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this fan connection entry.
.1.3.6.1.4.1.674.10893.1.20.130.8.1.2,StorageManagement-MIB::fanConnectionFanName,OCTET,read-only,,mandatory,,The name of the fan in this connection as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.8.1.3,StorageManagement-MIB::fanConnectionFanNumber,INTEGER,read-only,,mandatory,,The instance number of the fan in the fanTable in this connection.
.1.3.6.1.4.1.674.10893.1.20.130.8.1.4,StorageManagement-MIB::fanConnectionEnclosureName,OCTET,read-only,,mandatory,,The name of the enclosure as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.8.1.5,StorageManagement-MIB::fanConnectionEnclosureNumber,INTEGER,read-only,,mandatory,,The instance number of the enclosure in the enclosureTable
.1.3.6.1.4.1.674.10893.1.20.130.9,StorageManagement-MIB::powerSupplyTable,,not-accessible,,mandatory,,A table of managed Power Supplies. The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.9.1,StorageManagement-MIB::powerSupplyEntry,,not-accessible,powerSupplyNumber,mandatory,,An entry in the Power Supply table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.9.1.1,StorageManagement-MIB::powerSupplyNumber,INTEGER,read-only,,mandatory,,Instance number of this power supply entry.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.2,StorageManagement-MIB::powerSupplyName,OCTET,read-only,,mandatory,,The power supply's name as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.3,StorageManagement-MIB::powerSupplyVendor,OCTET,read-only,,mandatory,,The power supply's (re)seller's name.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.4,StorageManagement-MIB::powerSupplyState,INTEGER,read-only,,mandatory,ready(1):failed(2):notInstalled(5):degraded(6):removed(11):missing(21),The current condition of the power supply.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.5,StorageManagement-MIB::powerSupplySeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.6,StorageManagement-MIB::powerSupply1PartNumber,OCTET,read-only,,mandatory,,The part number of the power supply of the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.7,StorageManagement-MIB::powerSupply2PartNumber,OCTET,read-only,,obsolete,,This entry is obsolete. This setting is not supported
.1.3.6.1.4.1.674.10893.1.20.130.9.1.8,StorageManagement-MIB::powerSupplyRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the power supply state.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.9,StorageManagement-MIB::powerSupplyComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the power supply itself without the 
.1.3.6.1.4.1.674.10893.1.20.130.9.1.10,StorageManagement-MIB::powerSupplyNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this power supply.
.1.3.6.1.4.1.674.10893.1.20.130.9.1.11,StorageManagement-MIB::powerSupplyRevision,OCTET,read-only,,mandatory,,The revision number of the power supply in the enclosure.
.1.3.6.1.4.1.674.10893.1.20.130.10,StorageManagement-MIB::powerSupplyConnectionTable,,not-accessible,,mandatory,,A table of the connections between each power 
.1.3.6.1.4.1.674.10893.1.20.130.10.1,StorageManagement-MIB::powerSupplyConnectionEntry,,not-accessible,powerSupplyConnectionNumber,mandatory,,An entry in the Power Supply Connection table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.10.1.1,StorageManagement-MIB::powerSupplyConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this power supply connection entry.
.1.3.6.1.4.1.674.10893.1.20.130.10.1.2,StorageManagement-MIB::powerSupplyConnectionPowersupplyName,OCTET,read-only,,mandatory,,The name of the power supply in this connection 
.1.3.6.1.4.1.674.10893.1.20.130.10.1.3,StorageManagement-MIB::powerSupplyConnectionPowersupplyNumber,INTEGER,read-only,,mandatory,,This instance number in the powersupplyTable
.1.3.6.1.4.1.674.10893.1.20.130.10.1.4,StorageManagement-MIB::powerSupplyConnectionEnclosureName,OCTET,read-only,,mandatory,,The name of the enclosure to which this power supply is
.1.3.6.1.4.1.674.10893.1.20.130.10.1.5,StorageManagement-MIB::powerSupplyConnectionEnclosureNumber,INTEGER,read-only,,mandatory,,The instance number of the enclosure in the enclosureTable
.1.3.6.1.4.1.674.10893.1.20.130.10.1.6,StorageManagement-MIB::powerSupplyConnectionFirmwareVersion,OCTET,read-only,,mandatory,,Displays power supply connection firmware version.
.1.3.6.1.4.1.674.10893.1.20.130.11,StorageManagement-MIB::temperatureProbeTable,,not-accessible,,mandatory,,A table of managed Temperature Probes. The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.11.1,StorageManagement-MIB::temperatureProbeEntry,,not-accessible,temperatureProbeNumber,mandatory,,An entry in the Temperature Probe table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.11.1.1,StorageManagement-MIB::temperatureProbeNumber,INTEGER,read-only,,mandatory,,Instance number of this temperature probe entry.
.1.3.6.1.4.1.674.10893.1.20.130.11.1.2,StorageManagement-MIB::temperatureProbeName,OCTET,read-only,,mandatory,,Name of this temperature probe as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.11.1.3,StorageManagement-MIB::temperatureProbeVendor,OCTET,read-only,,mandatory,,Temperature probe's (re)seller's name.
.1.3.6.1.4.1.674.10893.1.20.130.11.1.4,StorageManagement-MIB::temperatureProbeState,INTEGER,read-only,,mandatory,ready(1):failed(2):offline(4):degraded(6):inactive(9):missing(21),The current condition of the temperature probe.
.1.3.6.1.4.1.674.10893.1.20.130.11.1.5,StorageManagement-MIB::temperatureProbeSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.11.1.6,StorageManagement-MIB::temperatureProbeUnit,OCTET,read-only,,mandatory,,The units that will be used to display temperatures for this 
.1.3.6.1.4.1.674.10893.1.20.130.11.1.7,StorageManagement-MIB::temperatureProbeMinWarning,INTEGER,read-only,,mandatory,,The minimum temperature that will force the probe into
.1.3.6.1.4.1.674.10893.1.20.130.11.1.8,StorageManagement-MIB::temperatureProbeMinCritical,INTEGER,read-only,,mandatory,,The minimum temperature that will force the probe into
.1.3.6.1.4.1.674.10893.1.20.130.11.1.9,StorageManagement-MIB::temperatureProbeMaxWarning,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into
.1.3.6.1.4.1.674.10893.1.20.130.11.1.10,StorageManagement-MIB::temperatureProbeMaxCritical,INTEGER,read-only,,mandatory,,The maximum temperature that will force the probe into
.1.3.6.1.4.1.674.10893.1.20.130.11.1.11,StorageManagement-MIB::temperatureProbeCurValue,INTEGER,read-only,,mandatory,,The current temperature of this probe.
.1.3.6.1.4.1.674.10893.1.20.130.11.1.12,StorageManagement-MIB::temperatureProbeRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the temperature probe state.
.1.3.6.1.4.1.674.10893.1.20.130.11.1.13,StorageManagement-MIB::temperatureProbeComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the temperature probe itself without the propagation
.1.3.6.1.4.1.674.10893.1.20.130.11.1.14,StorageManagement-MIB::temperatureProbeNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this temperature probe.
.1.3.6.1.4.1.674.10893.1.20.130.12,StorageManagement-MIB::temperatureConnectionTable,,not-accessible,,mandatory,,A table of the connections between each 
.1.3.6.1.4.1.674.10893.1.20.130.12.1,StorageManagement-MIB::temperatureConnectionEntry,,not-accessible,temperatureConnectionNumber,mandatory,,An entry in the Temperature Probe Connection table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.12.1.1,StorageManagement-MIB::temperatureConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this temperature probe connection entry.
.1.3.6.1.4.1.674.10893.1.20.130.12.1.2,StorageManagement-MIB::temperatureConnectionTemperatureName,OCTET,read-only,,mandatory,,The name of the temperature probe in this connection as 
.1.3.6.1.4.1.674.10893.1.20.130.12.1.3,StorageManagement-MIB::temperatureConnectionTemperatureNumber,INTEGER,read-only,,mandatory,,The instance number in the temperatureTable of the temperature probe in this connection.
.1.3.6.1.4.1.674.10893.1.20.130.12.1.4,StorageManagement-MIB::temperatureConnectionEnclosureName,OCTET,read-only,,mandatory,,The name of the enclosure as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.12.1.5,StorageManagement-MIB::temperatureConnectionEnclosureNumber,INTEGER,read-only,,mandatory,,The instance number of the enclosure in the enclosureTable
.1.3.6.1.4.1.674.10893.1.20.130.13,StorageManagement-MIB::enclosureManagementModuleTable,,not-accessible,,mandatory,,A table of managed Enclosure Management Modules. The number of 
.1.3.6.1.4.1.674.10893.1.20.130.13.1,StorageManagement-MIB::enclosureManagementModuleEntry,,not-accessible,enclosureManagementModuleNumber,mandatory,,An entry in the Enclosure Management Module table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.13.1.1,StorageManagement-MIB::enclosureManagementModuleNumber,INTEGER,read-only,,mandatory,,Instance number of this enclosure memory module entry.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.2,StorageManagement-MIB::enclosureManagementModuleName,OCTET,read-only,,mandatory,,Name of this enclosure memory module as represented in 
.1.3.6.1.4.1.674.10893.1.20.130.13.1.3,StorageManagement-MIB::enclosureManagementModuleVendor,OCTET,read-only,,mandatory,,The management module's (re)seller's name.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.4,StorageManagement-MIB::enclosureManagementModuleState,INTEGER,read-only,,mandatory,ready(1):failed(2):online(3):offline(4):notInstalled(5):degraded(6):missing(21),The current condition of the enclosure management 
.1.3.6.1.4.1.674.10893.1.20.130.13.1.5,StorageManagement-MIB::enclosureManagementModuleSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.6,StorageManagement-MIB::enclosureManagementModulePartNumber,OCTET,read-only,,mandatory,,The part number of the enclosure memory module.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.7,StorageManagement-MIB::enclosureManagementModuleType,INTEGER,read-only,,mandatory,eMM(1):terminationCard(2),The type of the enclosure management module.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.8,StorageManagement-MIB::enclosureManagementModuleFWVersion,OCTET,read-only,,mandatory,,Firmware version of the enclosure memory module.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.9,StorageManagement-MIB::enclosureManagementModuleMaxSpeed,OCTET,read-only,,mandatory,,The maximum bus speed of the enclosure management module.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.10,StorageManagement-MIB::enclosureManagementModuleRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the enclosure management module state.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.11,StorageManagement-MIB::enclosureManagementModuleComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the enclosure management module itself 
.1.3.6.1.4.1.674.10893.1.20.130.13.1.12,StorageManagement-MIB::enclosureManagementModuleNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this EMM.
.1.3.6.1.4.1.674.10893.1.20.130.13.1.13,StorageManagement-MIB::enclosureManagementModuleRevision,OCTET,read-only,,mandatory,,The revision number of the enclosure management module.
.1.3.6.1.4.1.674.10893.1.20.130.14,StorageManagement-MIB::enclosureManagementModuleConnectionTable,,not-accessible,,mandatory,,A table of the connections between each enclosure management module 
.1.3.6.1.4.1.674.10893.1.20.130.14.1,StorageManagement-MIB::enclosureManagementModuleConnectionEntry,,not-accessible,enclosureManagementModuleConnectionNumber,mandatory,,An entry in the Enclosure Management Module Connection table . A row in this 
.1.3.6.1.4.1.674.10893.1.20.130.14.1.1,StorageManagement-MIB::enclosureManagementModuleConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this enclosure management module
.1.3.6.1.4.1.674.10893.1.20.130.14.1.2,StorageManagement-MIB::enclosureManagementModuleConnectionEMMName,OCTET,read-only,,mandatory,,The name of the enclosure management module in this 
.1.3.6.1.4.1.674.10893.1.20.130.14.1.3,StorageManagement-MIB::enclosureManagementModuleConnectionEMMNumber,INTEGER,read-only,,mandatory,,The instance number of the enclosure management module in 
.1.3.6.1.4.1.674.10893.1.20.130.14.1.4,StorageManagement-MIB::enclosureManagementModuleConnectionEnclosureName,OCTET,read-only,,mandatory,,The name of the enclosure as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.14.1.5,StorageManagement-MIB::enclosureManagementModuleConnectionEnclosureNumber,INTEGER,read-only,,mandatory,,The instance number of the enclosure in the enclosureTable
.1.3.6.1.4.1.674.10893.1.20.130.15,StorageManagement-MIB::batteryTable,,not-accessible,,mandatory,,A table of managed Batteries. The number of 
.1.3.6.1.4.1.674.10893.1.20.130.15.1,StorageManagement-MIB::batteryEntry,,not-accessible,batteryNumber,mandatory,,An entry in the Battery table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.15.1.1,StorageManagement-MIB::batteryNumber,INTEGER,read-only,,mandatory,,Instance number of this battery entry.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.2,StorageManagement-MIB::batteryName,OCTET,read-only,,mandatory,,The battery's name as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.3,StorageManagement-MIB::batteryVendor,OCTET,read-only,,mandatory,,The battery's (re)seller's name.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.4,StorageManagement-MIB::batteryState,INTEGER,read-only,,mandatory,ready(1):failed(2):degraded(6):reconditioning(7):high(9):low(10):charging(12):missing(21):learning(36),Current state of battery.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.5,StorageManagement-MIB::batteryRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the battery state.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.6,StorageManagement-MIB::batteryComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the battery itself without the 
.1.3.6.1.4.1.674.10893.1.20.130.15.1.7,StorageManagement-MIB::batteryChargeCount,INTEGER,read-only,,mandatory,,The number of charges that have been applied to the battery.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.8,StorageManagement-MIB::batteryMaxChargeCount,INTEGER,read-only,,mandatory,,The maximum number of charges that can be applied to the battery.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.9,StorageManagement-MIB::batteryNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this battery.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.10,StorageManagement-MIB::batteryPredictedCapacity,INTEGER,read-only,,obsolete,failed(1):ready(2):unknown(4),This property displays the battery's ability to be charged.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.11,StorageManagement-MIB::batteryNextLearnTime,INTEGER,read-only,,deprecated,,Time next learn cycle must be executed (in hours.)
.1.3.6.1.4.1.674.10893.1.20.130.15.1.12,StorageManagement-MIB::batteryLearnState,INTEGER,read-only,,deprecated,failed(1):active(2):timedOut(4):requested(8):idle(16):due(32),Specifies the learn state activity of the battery.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.13,StorageManagement-MIB::batteryID,INTEGER,read-only,,mandatory,,Represents unique id for battery.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.14,StorageManagement-MIB::batteryMaxLearnDelay,INTEGER,read-only,,deprecated,,The maximum amount of time (in hours) that the battery learn cycle can be delayed.
.1.3.6.1.4.1.674.10893.1.20.130.15.1.15,StorageManagement-MIB::batteryLearnMode,INTEGER,read-write,,deprecated,auto(1):warn(2):autowarn(4):unknown(8),Indicates current learn mode of the battery.
.1.3.6.1.4.1.674.10893.1.20.130.16,StorageManagement-MIB::batteryConnectionTable,,not-accessible,,mandatory,,A table of the connections between each 
.1.3.6.1.4.1.674.10893.1.20.130.16.1,StorageManagement-MIB::batteryConnectionEntry,,not-accessible,batteryConnectionNumber,mandatory,,An entry in the Battery Connection table . A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.16.1.1,StorageManagement-MIB::batteryConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this battery connection entry.
.1.3.6.1.4.1.674.10893.1.20.130.16.1.2,StorageManagement-MIB::batteryConnectionBatteryName,OCTET,read-only,,mandatory,,The name of the battery in this connection as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.16.1.3,StorageManagement-MIB::batteryConnectionBatteryNumber,INTEGER,read-only,,mandatory,,The instance number in the batteryTable of the battery in this connection.
.1.3.6.1.4.1.674.10893.1.20.130.16.1.4,StorageManagement-MIB::batteryConnectionControllerName,OCTET,read-only,,mandatory,,The name of the controller as represented in Storage Management
.1.3.6.1.4.1.674.10893.1.20.130.16.1.5,StorageManagement-MIB::batteryConnectionControllerNumber,INTEGER,read-only,,mandatory,,The instance number of the controller in the controllerTable
.1.3.6.1.4.1.674.10893.1.20.130.17,StorageManagement-MIB::tapeDriveTable,,not-accessible,,mandatory,,A table of listed Tape Drives The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.17.1,StorageManagement-MIB::tapeDriveEntry,,not-accessible,tapeDriveNumber,mandatory,,An entry in the Tape Library table. A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.17.1.1,StorageManagement-MIB::tapeDriveNumber,INTEGER,read-only,,mandatory,,Instance number of this tape drive entry.
.1.3.6.1.4.1.674.10893.1.20.130.17.1.2,StorageManagement-MIB::tapeDriveName,OCTET,read-only,,mandatory,,The name of the tape drive as represented in Storage Management.
.1.3.6.1.4.1.674.10893.1.20.130.17.1.3,StorageManagement-MIB::tapeDriveVendor,OCTET,read-only,,mandatory,,The tape drive's manufacturer's name.
.1.3.6.1.4.1.674.10893.1.20.130.17.1.4,StorageManagement-MIB::tapeDriveProductID,OCTET,read-only,,mandatory,,The model number of the tape drive
.1.3.6.1.4.1.674.10893.1.20.130.17.1.5,StorageManagement-MIB::tapeDriveNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this tape drive
.1.3.6.1.4.1.674.10893.1.20.130.17.1.6,StorageManagement-MIB::tapeDriveBusType,INTEGER,read-only,,mandatory,sas(8),The bus type of the tape drive.
.1.3.6.1.4.1.674.10893.1.20.130.17.1.7,StorageManagement-MIB::tapeDriveSASAddress,OCTET,read-only,,mandatory,,The specified SAS address if this is a SAS tape drive.
.1.3.6.1.4.1.674.10893.1.20.130.17.1.8,StorageManagement-MIB::tapeDriveMediaType,INTEGER,read-only,,mandatory,tape(4),The Media type of the tape drive.
.1.3.6.1.4.1.674.10893.1.20.130.18,StorageManagement-MIB::nvmeAdapterTable,,not-accessible,,mandatory,,A table of listed NVME Adapter cards. The number of entries is 
.1.3.6.1.4.1.674.10893.1.20.130.18.1,StorageManagement-MIB::nvmeAdapterEntry,,not-accessible,nvmeAdapterNumber,mandatory,,An entry in the NvmeAdapter table. A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.130.18.1.1,StorageManagement-MIB::nvmeAdapterNumber,INTEGER,read-only,,mandatory,,Instance number of this NVME Adapter entry.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.2,StorageManagement-MIB::nvmeAdapterState,INTEGER,read-only,,mandatory,,The current state of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.3,StorageManagement-MIB::nvmeAdapterControllerNum,INTEGER,read-only,,mandatory,,The PCIeSSD subsystem Id to which the NVMe Adapter belongs to.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.4,StorageManagement-MIB::nvmeAdapterPCISlot,INTEGER,read-only,,mandatory,,The PCI slot of the system where the adapter card is connected.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.5,StorageManagement-MIB::nvmeAdapterDeviceName,OCTET,read-only,,mandatory,,The device name of the NVMe Adapter as it is represented in OMSA and also the operating system.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.6,StorageManagement-MIB::nvmeAdapterVendor,OCTET,read-only,,mandatory,,NVMe Adapter manufacturer.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.7,StorageManagement-MIB::nvmeAdapterProductID,OCTET,read-only,,mandatory,,The product id or part number of the NVMe Adapter 
.1.3.6.1.4.1.674.10893.1.20.130.18.1.8,StorageManagement-MIB::nvmeAdapterSerialNumber,OCTET,read-only,,mandatory,,Product serial number of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.9,StorageManagement-MIB::nvmeAdapterRevision,OCTET,read-only,,mandatory,,The NVMe Adapter revision.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.10,StorageManagement-MIB::nvmeAdapterDriverVersion,OCTET,read-only,,mandatory,,NVMe Adapter driver version.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.11,StorageManagement-MIB::nvmeAdapterPCIBusNo,INTEGER,read-only,,mandatory,,The PCI Bus number of the NVMe adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.12,StorageManagement-MIB::nvmeAdapterPCIDeviceNum,INTEGER,read-only,,mandatory,,The PCI device number of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.13,StorageManagement-MIB::nvmeAdapterPCIFuncNum,INTEGER,read-only,,mandatory,,The PCI device number of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.14,StorageManagement-MIB::nvmeAdapterNexusID,OCTET,read-only,,mandatory,,Nexus ID of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.15,StorageManagement-MIB::nvmeAdapterBusProtocolType,INTEGER,read-only,,mandatory,,The Bus protocol for NVMe device, expected value: 9 (PCIeSSD).
.1.3.6.1.4.1.674.10893.1.20.130.18.1.16,StorageManagement-MIB::nvmeAdapterMediaType,INTEGER,read-only,,mandatory,,NVMe Adapter media type.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.17,StorageManagement-MIB::nvmeAdapterLengthInMegaBytes,INTEGER,read-only,,mandatory,,Size in megabytes of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.18,StorageManagement-MIB::nvmeAdapterLengthOffsetBytes,INTEGER,read-only,,mandatory,,No of bytes after total number of megabytes have been subtracted from the total size of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.19,StorageManagement-MIB::nvmeAdapterDeviceID,INTEGER,read-only,,mandatory,,The device Id of the NVMe Adapter.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.20,StorageManagement-MIB::nvmeAdapterModelNumber,OCTET,read-only,,mandatory,,Model number of the NVMe Adapter as per the manufacturer.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.21,StorageManagement-MIB::nvmeAdapterNegotiatedSpeed,INTEGER,read-only,,mandatory,,The negotiated speed of the NVMe adapter in GT/s.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.22,StorageManagement-MIB::nvmeAdapterCapableSpeed,INTEGER,read-only,,mandatory,,The maximum rated speed of the NVMe adapter in GT/s.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.23,StorageManagement-MIB::nvmeAdapterRemainingRatedWrEnd,INTEGER,read-only,,mandatory,,The remaining percentage of writes on the NVME device
.1.3.6.1.4.1.674.10893.1.20.130.18.1.24,StorageManagement-MIB::nvmeAdapterFormFactor,INTEGER,read-only,,mandatory,,The form factor of the NVMe Adapter. 
.1.3.6.1.4.1.674.10893.1.20.130.18.1.25,StorageManagement-MIB::nvmeAdapterSupportedSpec,OCTET,read-only,,mandatory,,The NVMe specification supported by the device.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.26,StorageManagement-MIB::nvmeAdapterMaxLinkWidth,INTEGER,read-only,,mandatory,,The maximum bus width of NVME Adapter
.1.3.6.1.4.1.674.10893.1.20.130.18.1.27,StorageManagement-MIB::nvmeAdapterNegotiatedLinkWidth,INTEGER,read-only,,mandatory,,The negotiated bus width of NVME Adapter. 
.1.3.6.1.4.1.674.10893.1.20.130.18.1.28,StorageManagement-MIB::nvmeAdapterSubVendor,OCTET,read-only,,mandatory,,Sub vendor of the NVMe Adapter device.
.1.3.6.1.4.1.674.10893.1.20.130.18.1.29,StorageManagement-MIB::nvmeAdapterAvailableSpare,INTEGER,read-only,,mandatory,,The remaining available spare space on the NVME device
.1.3.6.1.4.1.674.10893.1.20.140,StorageManagement-MIB::logicalDevices,,,,,,
.1.3.6.1.4.1.674.10893.1.20.140.1,StorageManagement-MIB::virtualDiskTable,,not-accessible,,mandatory,,A table of managed Virtual Disks. The number of entries is related
.1.3.6.1.4.1.674.10893.1.20.140.1.1,StorageManagement-MIB::virtualDiskEntry,,not-accessible,virtualDiskNumber,mandatory,,An entry in the Virtual Disk table. A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.140.1.1.1,StorageManagement-MIB::virtualDiskNumber,INTEGER,read-only,,mandatory,,Instance number of this virtual disk entry.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.2,StorageManagement-MIB::virtualDiskName,OCTET,read-only,,mandatory,,The virtual disk's label generated by Storage Management or entered
.1.3.6.1.4.1.674.10893.1.20.140.1.1.3,StorageManagement-MIB::virtualDiskDeviceName,OCTET,read-only,,mandatory,,Device name used by this virtual disk's member disks.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.4,StorageManagement-MIB::virtualDiskState,INTEGER,read-only,,mandatory,ready(1):failed(2):online(3):offline(4):degraded(6):verifying(7):resynching(15):regenerating(16):failedRedundancy(18):rebuilding(24):formatting(26):reconstructing(32):initializing(35):backgroundInit(36):permanentlyDegraded(52),The current condition of this virtual disk
.1.3.6.1.4.1.674.10893.1.20.140.1.1.5,StorageManagement-MIB::virtualDiskSeverity,INTEGER,read-only,,obsolete,warning(1):error(2):failure(3),This entry is obsolete for Storage Management.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.6,StorageManagement-MIB::virtualDiskLengthInMB,INTEGER,read-only,,mandatory,,The size of this virtual disk in megabytes. If this size
.1.3.6.1.4.1.674.10893.1.20.140.1.1.7,StorageManagement-MIB::virtualDiskLengthInBytes,INTEGER,read-only,,mandatory,,The portion of the virtual disk in bytes that is smaller
.1.3.6.1.4.1.674.10893.1.20.140.1.1.8,StorageManagement-MIB::virtualDiskFreeSpaceInMB,INTEGER,read-only,,obsolete,,This entry is obsolete. This property is not supported for virtual disks managed under Storage Management.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.9,StorageManagement-MIB::virtualDiskFreeSpaceInBytes,INTEGER,read-only,,obsolete,,This entry is obsolete. This property is not supported for virtual disks managed under Storage Management.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.10,StorageManagement-MIB::virtualDiskWritePolicy,INTEGER,read-only,,mandatory,enabled(1):disabled(2):writeBack(3):writeThrough(4):enabledAlways(5):forceWriteback(6):enabledAlwaysSAS(7):notApplicable(9),Indicates whether the controller's write cache will be used 
.1.3.6.1.4.1.674.10893.1.20.140.1.1.11,StorageManagement-MIB::virtualDiskReadPolicy,INTEGER,read-only,,mandatory,enabled(1):disabled(2):readAhead(3):adaptiveReadAhead(4):noReadAhead(5):notApplicable(9),Indicates whether the controller's read cache will be used 
.1.3.6.1.4.1.674.10893.1.20.140.1.1.12,StorageManagement-MIB::virtualDiskCachePolicy,INTEGER,read-only,,mandatory,directIO(1):cachedIO(2):not-applicable(99),Indicates whether the controller's cache is used when 
.1.3.6.1.4.1.674.10893.1.20.140.1.1.13,StorageManagement-MIB::virtualDiskLayout,INTEGER,read-only,,mandatory,concatenated(1):raid-0(2):raid-1(3):raid-2(4):raid-3(5):raid-4(6):raid-5(7):raid-6(8):raid-7(9):raid-10(10):raid-30(11):raid-50(12):addSpares(13):deleteLogical(14):transformLogical(15):raid-0-plus-1(18):concatRaid-1(19):concatRaid-5(20):noRaid(21):volume(22):raidMorph(23):raid-60(24):cacheCade(25),The virtual disk's RAID type.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.14,StorageManagement-MIB::virtualDiskCurStripeSizeInMB,INTEGER,read-only,,mandatory,,The stripe size of this virtual disk in megabytes. If this
.1.3.6.1.4.1.674.10893.1.20.140.1.1.15,StorageManagement-MIB::virtualDiskCurStripeSizeInBytes,INTEGER,read-only,,mandatory,,The portion of the stripe size in bytes that is smaller 
.1.3.6.1.4.1.674.10893.1.20.140.1.1.16,StorageManagement-MIB::virtualDiskChannel,INTEGER,read-only,,obsolete,,This entry is obsolete. This property is not supported
.1.3.6.1.4.1.674.10893.1.20.140.1.1.17,StorageManagement-MIB::virtualDiskTargetID,INTEGER,read-only,,mandatory,,Unique ID for the virtual disk.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.18,StorageManagement-MIB::virtualDiskLunID,INTEGER,read-only,,obsolete,,This entry is obsolete. This property is not supported
.1.3.6.1.4.1.674.10893.1.20.140.1.1.19,StorageManagement-MIB::virtualDiskRollUpStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),Severity of the virtual disk state.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.20,StorageManagement-MIB::virtualDiskComponentStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),The status of the virtual disk itself without 
.1.3.6.1.4.1.674.10893.1.20.140.1.1.21,StorageManagement-MIB::virtualDiskNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this virtual disk.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.22,StorageManagement-MIB::virtualDiskArrayDiskType,INTEGER,read-only,,mandatory,sas(1):sata(2):scsi(3):ide(4):unknown(99),Identifies the type of array (physical) disks used to create the virtual disk.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.23,StorageManagement-MIB::virtualDiskBadBlocksDetected,INTEGER,read-only,,mandatory,,Indicates if virtual disk has bad blocks.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.24,StorageManagement-MIB::virtualDiskEncrypted,INTEGER,read-only,,mandatory,,Indicates if virtual disk is encrypted.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.25,StorageManagement-MIB::virtualDiskIsCacheCade,INTEGER,read-only,,mandatory,,Indicates if this virtual disk is configured as CacheCade.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.26,StorageManagement-MIB::virtualDiskDiskCachePolicy,INTEGER,read-only,,mandatory,unchanged(1):enabled(2):disabled(4):default(8):undetermined(10),Indicates disk cache policy of the logical device.
.1.3.6.1.4.1.674.10893.1.20.140.1.1.27,StorageManagement-MIB::virtualDiskAssociatedFluidCacheStatus,INTEGER,read-only,,mandatory,,Indicates the status of the associated fluid cache status
.1.3.6.1.4.1.674.10893.1.20.140.1.1.28,StorageManagement-MIB::virtualDiskPIEnable,INTEGER,read-only,,mandatory,,Indicates if T10 PI is enabled on a virtual disk.
.1.3.6.1.4.1.674.10893.1.20.140.2,StorageManagement-MIB::virtualDiskPartitionTable,,not-accessible,,mandatory,,A table of managed Virtual Disk Partitions. The number of entries is related
.1.3.6.1.4.1.674.10893.1.20.140.2.1,StorageManagement-MIB::virtualDiskPartitionEntry,,not-accessible,virtualDiskPartitionNumber,mandatory,,An entry in the Virtual Disk Partition table. A row in this table cannot be
.1.3.6.1.4.1.674.10893.1.20.140.2.1.1,StorageManagement-MIB::virtualDiskPartitionNumber,INTEGER,read-only,,mandatory,,Instance number of this partition entry
.1.3.6.1.4.1.674.10893.1.20.140.2.1.2,StorageManagement-MIB::virtualDiskPartitionDeviceName,OCTET,read-only,,mandatory,,Device name of the partition given by the operating system.
.1.3.6.1.4.1.674.10893.1.20.140.2.1.3,StorageManagement-MIB::virtualDiskPartitionState,INTEGER,read-only,,mandatory,active(1):no(2):removing(3):failed(4),State of the partition. This is mapped stated of the associate virtual disk.
.1.3.6.1.4.1.674.10893.1.20.140.2.1.4,StorageManagement-MIB::virtualDiskPartitionSize,INTEGER,read-only,,mandatory,,Size of the Partition in GB.
.1.3.6.1.4.1.674.10893.1.20.140.2.1.5,StorageManagement-MIB::virtualDiskPartitionFluidCacheStatus,OCTET,read-only,,mandatory,,Indicates if the partition has associated fluidcache
.1.3.6.1.4.1.674.10893.1.20.140.2.1.6,StorageManagement-MIB::virtualDiskPartitionNexusID,OCTET,read-only,,mandatory,,Durable unique ID for this partition. This comprises the controllerID, virtualDisk ID and hash mapped WWN number of this partition
.1.3.6.1.4.1.674.10893.1.20.140.3,StorageManagement-MIB::arrayDiskLogicalConnectionTable,,not-accessible,,mandatory,,A table of the connections between array disks, the 
.1.3.6.1.4.1.674.10893.1.20.140.3.1,StorageManagement-MIB::arrayDiskLogicalConnectionEntry,,not-accessible,arrayDiskLogicalConnectionNumber,mandatory,,An entry in the Array Disk Logical Connection table . A row in this table 
.1.3.6.1.4.1.674.10893.1.20.140.3.1.1,StorageManagement-MIB::arrayDiskLogicalConnectionNumber,INTEGER,read-only,,mandatory,,Instance number of this array disk logical connection entry.
.1.3.6.1.4.1.674.10893.1.20.140.3.1.2,StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName,OCTET,read-only,,mandatory,,The name of the array disk in this logical connection.
.1.3.6.1.4.1.674.10893.1.20.140.3.1.3,StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber,INTEGER,read-only,,mandatory,,The instance number of the array disk in this logical connection.
.1.3.6.1.4.1.674.10893.1.20.140.3.1.4,StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName,OCTET,read-only,,mandatory,,The name of the virtual disk to which this array disk belongs.
.1.3.6.1.4.1.674.10893.1.20.140.3.1.5,StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber,INTEGER,read-only,,mandatory,,The instance number of the virtual disk to which this array disk 
.1.3.6.1.4.1.674.10893.1.20.140.3.1.6,StorageManagement-MIB::arrayDiskLogicalConnectionDiskName,OCTET,read-only,,mandatory,,The name of the disk group to with this array disk belongs.
.1.3.6.1.4.1.674.10893.1.20.140.3.1.7,StorageManagement-MIB::arrayDiskLogicalConnectionDiskNumber,INTEGER,read-only,,mandatory,,This instance number of the disk group to with this array disk belongs.
.1.3.6.1.4.1.674.10893.1.20.140.4,StorageManagement-MIB::fluidCacheTable,,not-accessible,,mandatory,,A table of managed FluidCache. The number of entries is related to FluidCache discovered in the system. 
.1.3.6.1.4.1.674.10893.1.20.140.4.1,StorageManagement-MIB::fluidCacheEntry,,not-accessible,fluidCacheNumber,mandatory,,An entry in the Fluid Cache table.
.1.3.6.1.4.1.674.10893.1.20.140.4.1.1,StorageManagement-MIB::fluidCacheNumber,INTEGER,read-only,,mandatory,,Instance number of this fluid cache entry
.1.3.6.1.4.1.674.10893.1.20.140.4.1.2,StorageManagement-MIB::fluidCacheName,OCTET,read-only,,mandatory,,The name of the fluidcache in this subsystem as represented in Storage Management. 
.1.3.6.1.4.1.674.10893.1.20.140.4.1.3,StorageManagement-MIB::fluidCacheLicenseState,OCTET,read-only,,mandatory,,License state of the associated fluid cache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.4,StorageManagement-MIB::fluidCacheLicenseValidity,INTEGER,read-only,,mandatory,,This entry displays the number of days the fluid cache license is valid. It has to be read in parallel to license type.
.1.3.6.1.4.1.674.10893.1.20.140.4.1.5,StorageManagement-MIB::fluidCacheLicenseEntitlementID,OCTET,read-only,,mandatory,,Indiactes the Entitlement Identifier for the license of the fluid cache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.6,StorageManagement-MIB::fluidCacheLicenseDuration,OCTET,read-only,,mandatory,,Indicates the duration of the the license validity
.1.3.6.1.4.1.674.10893.1.20.140.4.1.7,StorageManagement-MIB::fluidCacheLicenseCapacity,OCTET,read-only,,mandatory,,Indicates the capacity of the license of fluidcache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.8,StorageManagement-MIB::fluidCacheLicenseRemaining,OCTET,read-write,,mandatory,,Indicates the remaining days of the license validity
.1.3.6.1.4.1.674.10893.1.20.140.4.1.9,StorageManagement-MIB::fluidCacheLicenseType,OCTET,read-only,,mandatory,,Indicates the type of the license of the fluidcache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.10,StorageManagement-MIB::fluidCacheLicenseVendor,OCTET,read-only,,mandatory,,Indicates the license vendor for the fluidcache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.11,StorageManagement-MIB::fluidCacheLicenseProductId,OCTET,read-only,,mandatory,,Indicates the product ID of the license of the fluidcache susbsytem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.12,StorageManagement-MIB::fluidCacheLicenseDateSold,OCTET,read-only,,mandatory,,Indicates the date on which the license for the fluidcache subsystem is sold
.1.3.6.1.4.1.674.10893.1.20.140.4.1.13,StorageManagement-MIB::fluidCacheLicenseGeneration,OCTET,read-only,,mandatory,,Indicates the generation of the license for the fluidcache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.14,StorageManagement-MIB::fluidCacheLicenseFeatureID,OCTET,read-only,,mandatory,,Indicates the license feature ID of the fluidcache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.15,StorageManagement-MIB::fluidCacheLicenseFeatureDescription,OCTET,read-only,,mandatory,,Provides the description of the license feature of fluidcache subsystem
.1.3.6.1.4.1.674.10893.1.20.140.4.1.16,StorageManagement-MIB::fluidCacheNexus,OCTET,read-only,,mandatory,,Indicates the unique ID of the fludicache component
.1.3.6.1.4.1.674.10893.1.20.140.5,StorageManagement-MIB::fluidCacheDiskTable,,not-accessible,,mandatory,,Indicates the Disk Table of the fludicache component
.1.3.6.1.4.1.674.10893.1.20.140.5.1,StorageManagement-MIB::fluidCacheDiskEntry,,not-accessible,fluidCacheDiskNumber,mandatory,,Indicates the Disk Number of the fludicache component
.1.3.6.1.4.1.674.10893.1.20.140.5.1.1,StorageManagement-MIB::fluidCacheDiskNumber,INTEGER,read-only,,mandatory,,Instance number of the fluidCacheDisk entry
.1.3.6.1.4.1.674.10893.1.20.140.5.1.2,StorageManagement-MIB::fluidCacheDiskName,OCTET,read-only,,mandatory,,Name of the Fluid Cache Disk Name as seen by storage management
.1.3.6.1.4.1.674.10893.1.20.140.5.1.3,StorageManagement-MIB::fluidCacheDiskState,INTEGER,read-only,,mandatory,,State of the FluidCacheDisk entry
.1.3.6.1.4.1.674.10893.1.20.140.5.1.4,StorageManagement-MIB::fluidCacheDiskBackendDeviceType,INTEGER,read-only,,mandatory,,This displays the type of the backend device beneath the fluid cache disk.
.1.3.6.1.4.1.674.10893.1.20.140.5.1.5,StorageManagement-MIB::fluidCacheDiskBackendDeviceName,OCTET,read-only,,mandatory,,Device name of the backend device as seen by the operating system
.1.3.6.1.4.1.674.10893.1.20.140.5.1.6,StorageManagement-MIB::fluidCacheDiskBackendDeviceSize,INTEGER,read-only,,mandatory,,Size of the Backend device. Size is indicated in GB
.1.3.6.1.4.1.674.10893.1.20.140.5.1.7,StorageManagement-MIB::fluidCacheDiskOperatingMode,INTEGER,read-only,,mandatory,,Operating mode of the FluidCache. Values are 
.1.3.6.1.4.1.674.10893.1.20.140.5.1.8,StorageManagement-MIB::fluidCacheDiskConfiguredMode,INTEGER,read-only,,mandatory,,Configured Mode of the FluidCache. The values are 
.1.3.6.1.4.1.674.10893.1.20.140.5.1.9,StorageManagement-MIB::fluidCacheDiskNexus,OCTET,read-write,,mandatory,,Durable Unique ID of the fluidcache disk
.1.3.6.1.4.1.674.10893.1.20.140.5.1.10,StorageManagement-MIB::fluidCacheDiskStatus,INTEGER,read-only,,mandatory,,Severity of the fluid cache disk state.
.1.3.6.1.4.1.674.10893.1.20.140.6,StorageManagement-MIB::fluidCachePoolTable,,not-accessible,,mandatory,,Indicates the Pool Table of the fludicache component
.1.3.6.1.4.1.674.10893.1.20.140.6.1,StorageManagement-MIB::fluidCachePoolEntry,,not-accessible,fluidCachePoolNumber,mandatory,,Indicates the Pool Number of the fludicache component
.1.3.6.1.4.1.674.10893.1.20.140.6.1.1,StorageManagement-MIB::fluidCachePoolNumber,INTEGER,read-only,,mandatory,,Instance number of the fluid cachepool entry
.1.3.6.1.4.1.674.10893.1.20.140.6.1.2,StorageManagement-MIB::fluidCachePoolStoreCount,INTEGER,read-only,,mandatory,,Number of flash devices that are part of the fluidcache pool
.1.3.6.1.4.1.674.10893.1.20.140.6.1.3,StorageManagement-MIB::fluidCachePoolUUID,OCTET,read-only,,mandatory,,UUID of the fluidcache pool
.1.3.6.1.4.1.674.10893.1.20.140.6.1.4,StorageManagement-MIB::fluidCachePoolLicenseState,OCTET,read-only,,mandatory,,State of the fluid cache license.
.1.3.6.1.4.1.674.10893.1.20.140.6.1.5,StorageManagement-MIB::fluidCachePoolSize,INTEGER,read-only,,mandatory,,Size of the fluidcache pool in GiB
.1.3.6.1.4.1.674.10893.1.20.140.6.1.6,StorageManagement-MIB::fluidCachePoolHighAvailabilityState,OCTET,read-only,,mandatory,,Indicates if the fluidcache pool is operating in high availability mode.
.1.3.6.1.4.1.674.10893.1.20.140.6.1.7,StorageManagement-MIB::fluidCachePoolNexus,OCTET,read-only,,mandatory,,Durable unique ID of the fluidcache pool entry
.1.3.6.1.4.1.674.10893.1.20.140.6.1.8,StorageManagement-MIB::fluidCachePoolStatus,INTEGER,read-only,,mandatory,,Severity of the fluid cache pool table state.
.1.3.6.1.4.1.674.10893.1.20.200,StorageManagement-MIB::storageManagementEvent,,,,,,
.1.3.6.1.4.1.674.10893.1.20.200.0,StorageManagement-MIB::storageManagementEvent#,,,,,,
.1.3.6.1.4.1.674.10893.1.20.200.0.101,StorageManagement-MIB::alertStorageManagementInformation,,,,,,Storage Management Information
.1.3.6.1.4.1.674.10893.1.20.200.0.102,StorageManagement-MIB::alertStorageManagementNormal,,,,,,There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10893.1.20.200.0.103,StorageManagement-MIB::alertStorageManagementWarning,,,,,,Storage Management has detected a device independent warning condition.
.1.3.6.1.4.1.674.10893.1.20.200.0.104,StorageManagement-MIB::alertStorageManagementFailure,,,,,,Storage Management has detected a device independent error condition.
.1.3.6.1.4.1.674.10893.1.20.200.0.105,StorageManagement-MIB::alertStorageManagementNonRecoverable,,,,,,Storage Management has detected a device independent non-recoverable condition.
.1.3.6.1.4.1.674.10893.1.20.200.0.751,StorageManagement-MIB::alertControllerInformation,,,,,,Controller information.
.1.3.6.1.4.1.674.10893.1.20.200.0.752,StorageManagement-MIB::alertControllerNormal,,,,,,Controller has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.753,StorageManagement-MIB::alertControllerWarning,,,,,,Controller warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.754,StorageManagement-MIB::alertControllerFailure,,,,,,Controller failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.755,StorageManagement-MIB::alertControllerNonRecoverable,,,,,,Controller is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.801,StorageManagement-MIB::alertChannelInformation,,,,,,Channel information.
.1.3.6.1.4.1.674.10893.1.20.200.0.802,StorageManagement-MIB::alertChannelNormal,,,,,,Channel has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.803,StorageManagement-MIB::alertChannelWarning,,,,,,Channel warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.804,StorageManagement-MIB::alertChannelFailure,,,,,,Channel failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.805,StorageManagement-MIB::alertChannelNonRecoverable,,,,,,Channel is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.851,StorageManagement-MIB::alertEnclosureInformation,,,,,,Enclosure information.
.1.3.6.1.4.1.674.10893.1.20.200.0.852,StorageManagement-MIB::alertEnclosureNormal,,,,,,Enclosure has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.853,StorageManagement-MIB::alertEnclosureWarning,,,,,,Enclosure warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.854,StorageManagement-MIB::alertEnclosureFailure,,,,,,Enclosure failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.855,StorageManagement-MIB::alertEnclosureNonRecoverable,,,,,,Enclosure is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.901,StorageManagement-MIB::alertArrayDiskInformation,,,,,,Array disk information.
.1.3.6.1.4.1.674.10893.1.20.200.0.902,StorageManagement-MIB::alertArrayDiskNormal,,,,,,Array disk has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.903,StorageManagement-MIB::alertArrayDiskWarning,,,,,,Array disk warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.904,StorageManagement-MIB::alertArrayDiskFailure,,,,,,Array disk failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.905,StorageManagement-MIB::alertArrayDiskNonRecoverable,,,,,,Array disk is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.951,StorageManagement-MIB::alertEMMInformation,,,,,,EMM information.
.1.3.6.1.4.1.674.10893.1.20.200.0.952,StorageManagement-MIB::alertEMMNormal,,,,,,EMM has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.953,StorageManagement-MIB::alertEMMWarning,,,,,,EMM warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.954,StorageManagement-MIB::alertEMMFailure,,,,,,EMM failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.955,StorageManagement-MIB::alertEMMNonRecoverable,,,,,,EMM is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.1001,StorageManagement-MIB::alertPowerSupplyInformation,,,,,,Power supply information.
.1.3.6.1.4.1.674.10893.1.20.200.0.1002,StorageManagement-MIB::alertPowerSupplyNormal,,,,,,Power supply has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.1003,StorageManagement-MIB::alertPowerSupplyWarning,,,,,,Power supply warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1004,StorageManagement-MIB::alertPowerSupplyFailure,,,,,,Power supply failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1005,StorageManagement-MIB::alertPowerSupplyNonRecoverable,,,,,,Power supply is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.1051,StorageManagement-MIB::alertTemperatureProbeInformation,,,,,,Temperature probe information.
.1.3.6.1.4.1.674.10893.1.20.200.0.1052,StorageManagement-MIB::alertTemperatureProbeNormal,,,,,,Temperature probe has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.1053,StorageManagement-MIB::alertTemperatureProbeWarning,,,,,,Temperature probe warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1054,StorageManagement-MIB::alertTemperatureProbeFailure,,,,,,Temperature probe failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1055,StorageManagement-MIB::alertTemperatureProbeNonRecoverable,,,,,,Temperature probe is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.1101,StorageManagement-MIB::alertFanInformation,,,,,,Fan information.
.1.3.6.1.4.1.674.10893.1.20.200.0.1102,StorageManagement-MIB::alertFanNormal,,,,,,Fan has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.1103,StorageManagement-MIB::alertFanWarning,,,,,,Fan warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1104,StorageManagement-MIB::alertFanFailure,,,,,,Fan failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1105,StorageManagement-MIB::alertFanNonRecoverable,,,,,,Fan is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.1151,StorageManagement-MIB::alertBatteryInformation,,,,,,Battery information.
.1.3.6.1.4.1.674.10893.1.20.200.0.1152,StorageManagement-MIB::alertBatteryNormal,,,,,,Battery has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.1153,StorageManagement-MIB::alertBatteryWarning,,,,,,Battery warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1154,StorageManagement-MIB::alertBatteryFailure,,,,,,Battery failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1155,StorageManagement-MIB::alertBatteryNonRecoverable,,,,,,Battery is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.1201,StorageManagement-MIB::alertVirtualDiskInformation,,,,,,Virtual disk information.
.1.3.6.1.4.1.674.10893.1.20.200.0.1202,StorageManagement-MIB::alertVirtualDiskNormal,,,,,,Virtual disk has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.1203,StorageManagement-MIB::alertVirtualDiskWarning,,,,,,Virtual disk warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1204,StorageManagement-MIB::alertVirtualDiskFailure,,,,,,Virtual disk failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1205,StorageManagement-MIB::alertVirtualDiskNonRecoverable,,,,,,Virtual disk is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.1304,StorageManagement-MIB::alertRedundancyNormal,,,,,,Redundancy has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.1305,StorageManagement-MIB::alertRedundancyDegraded,,,,,,Redundancy has been degraded.
.1.3.6.1.4.1.674.10893.1.20.200.0.1306,StorageManagement-MIB::alertRedundancyLost,,,,,,Redundancy has been lost.
.1.3.6.1.4.1.674.10893.1.20.200.0.1401,StorageManagement-MIB::alertFluidCacheDiskInformation,,,,,,Fluid Cache Disk Information
.1.3.6.1.4.1.674.10893.1.20.200.0.1403,StorageManagement-MIB::alertfluidCacheDiskWarning,,,,,,Fluid Cache Disk warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1404,StorageManagement-MIB::alertFluidCacheDisklFailure,,,,,,Fluid Cache Disk failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1501,StorageManagement-MIB::alertVirtualDiskPartitionInformation,,,,,,Virtual Disk Partition Information
.1.3.6.1.4.1.674.10893.1.20.200.0.1503,StorageManagement-MIB::alertVirtualDiskPartitionWarning,,,,,,Virtual Disk Partition warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1504,StorageManagement-MIB::alertVirtualDiskPartitionFailure,,,,,,Virtual Disk Partition failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1601,StorageManagement-MIB::alertFluidCacheInformation,,,,,,Fluid Cache Information
.1.3.6.1.4.1.674.10893.1.20.200.0.1603,StorageManagement-MIB::alertfluidCacheWarning,,,,,,Fluid Cache warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1604,StorageManagement-MIB::alertFluidCacheFailure,,,,,,Fluid Cache failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.1701,StorageManagement-MIB::alertFluidCachePoolInformation,,,,,,Fluid Cache Pool Information
.1.3.6.1.4.1.674.10893.1.20.200.0.1703,StorageManagement-MIB::alertfluidCachePoolWarning,,,,,,Fluid Cache Pool warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.1704,StorageManagement-MIB::alertFluidCachePoolFailure,,,,,,Fluid Cache Pool failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.10100,StorageManagement-MIB::alertEEMIStorageManagementInformation,,,,,,Storage Management Information
.1.3.6.1.4.1.674.10893.1.20.200.0.10200,StorageManagement-MIB::alertEEMIStorageManagementNormal,,,,,,There is no global status change associated with this trap.
.1.3.6.1.4.1.674.10893.1.20.200.0.10300,StorageManagement-MIB::alertEEMIStorageManagementWarning,,,,,,Storage Management has detected a device independent warning condition.
.1.3.6.1.4.1.674.10893.1.20.200.0.10400,StorageManagement-MIB::alertEEMIStorageManagementFailure,,,,,,Storage Management has detected a device independent error condition.
.1.3.6.1.4.1.674.10893.1.20.200.0.10500,StorageManagement-MIB::alertEEMIStorageManagementNonRecoverable,,,,,,Storage Management has detected a device independent non-recoverable condition.
.1.3.6.1.4.1.674.10893.1.20.200.0.75100,StorageManagement-MIB::alertEEMIControllerInformation,,,,,,Controller information.
.1.3.6.1.4.1.674.10893.1.20.200.0.75200,StorageManagement-MIB::alertEEMIControllerNormal,,,,,,Controller has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.75300,StorageManagement-MIB::alertEEMIControllerWarning,,,,,,Controller warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.75400,StorageManagement-MIB::alertEEMIControllerFailure,,,,,,Controller failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.75500,StorageManagement-MIB::alertEEMIControllerNonRecoverable,,,,,,Controller is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.80100,StorageManagement-MIB::alertEEMIChannelInformation,,,,,,Channel information.
.1.3.6.1.4.1.674.10893.1.20.200.0.80200,StorageManagement-MIB::alertEEMIChannelNormal,,,,,,Channel has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.80300,StorageManagement-MIB::alertEEMIChannelWarning,,,,,,Channel warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.80400,StorageManagement-MIB::alertEEMIChannelFailure,,,,,,Channel failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.80500,StorageManagement-MIB::alertEEMIChannelNonRecoverable,,,,,,Channel is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.85100,StorageManagement-MIB::alertEEMIEnclosureInformation,,,,,,Enclosure information.
.1.3.6.1.4.1.674.10893.1.20.200.0.85200,StorageManagement-MIB::alertEEMIEnclosureNormal,,,,,,Enclosure has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.85300,StorageManagement-MIB::alertEEMIEnclosureWarning,,,,,,Enclosure warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.85400,StorageManagement-MIB::alertEEMIEnclosureFailure,,,,,,Enclosure failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.85500,StorageManagement-MIB::alertEEMIEnclosureNonRecoverable,,,,,,Enclosure is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.90100,StorageManagement-MIB::alertEEMIArrayDiskInformation,,,,,,Array disk information.
.1.3.6.1.4.1.674.10893.1.20.200.0.90200,StorageManagement-MIB::alertEEMIArrayDiskNormal,,,,,,Array disk has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.90300,StorageManagement-MIB::alertEEMIArrayDiskWarning,,,,,,Array disk warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.90400,StorageManagement-MIB::alertEEMIArrayDiskFailure,,,,,,Array disk failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.90500,StorageManagement-MIB::alertEEMIArrayDiskNonRecoverable,,,,,,Array disk is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.95100,StorageManagement-MIB::alertEMMEMMInformation,,,,,,EMM information.
.1.3.6.1.4.1.674.10893.1.20.200.0.95200,StorageManagement-MIB::alertEEMIEMMNormal,,,,,,EMM has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.95300,StorageManagement-MIB::alertEEMIEMMWarning,,,,,,EMM warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.95400,StorageManagement-MIB::alertEEMIEMMFailure,,,,,,EMM failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.95500,StorageManagement-MIB::alertEEMIEMMNonRecoverable,,,,,,EMM is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.100100,StorageManagement-MIB::alertEEMIPowerSupplyInformation,,,,,,Power supply information.
.1.3.6.1.4.1.674.10893.1.20.200.0.100200,StorageManagement-MIB::alertEEMIPowerSupplyNormal,,,,,,Power supply has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.100300,StorageManagement-MIB::alertEEMIPowerSupplyWarning,,,,,,Power supply warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.100400,StorageManagement-MIB::alertEEMIPowerSupplyFailure,,,,,,Power supply failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.100500,StorageManagement-MIB::alertEEMIPowerSupplyNonRecoverable,,,,,,Power supply is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.105100,StorageManagement-MIB::alertEEMITemperatureProbeInformation,,,,,,Temperature probe information.
.1.3.6.1.4.1.674.10893.1.20.200.0.105200,StorageManagement-MIB::alertEEMITemperatureProbeNormal,,,,,,Temperature probe has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.105300,StorageManagement-MIB::alertEEMITemperatureProbeWarning,,,,,,Temperature probe warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.105400,StorageManagement-MIB::alertEEMITemperatureProbeFailure,,,,,,Temperature probe failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.105500,StorageManagement-MIB::alertEEMITemperatureProbeNonRecoverable,,,,,,Temperature probe is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.110100,StorageManagement-MIB::alertEEMIFanInformation,,,,,,Fan information.
.1.3.6.1.4.1.674.10893.1.20.200.0.110200,StorageManagement-MIB::alertEEMIFanNormal,,,,,,Fan has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.110300,StorageManagement-MIB::alertEEMIFanWarning,,,,,,Fan warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.110400,StorageManagement-MIB::alertEEMIFanFailure,,,,,,Fan failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.110500,StorageManagement-MIB::alertEEMIFanNonRecoverable,,,,,,Fan is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.115100,StorageManagement-MIB::alertEEMIBatteryInformation,,,,,,Battery information.
.1.3.6.1.4.1.674.10893.1.20.200.0.115200,StorageManagement-MIB::alertEEMIBatteryNormal,,,,,,Battery has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.115300,StorageManagement-MIB::alertEEMIBatteryWarning,,,,,,Battery warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.115400,StorageManagement-MIB::alertEEMIBatteryFailure,,,,,,Battery failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.115500,StorageManagement-MIB::alertEEMIBatteryNonRecoverable,,,,,,Battery is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.120100,StorageManagement-MIB::alertEEMIVirtualDiskInformation,,,,,,Virtual disk information.
.1.3.6.1.4.1.674.10893.1.20.200.0.120200,StorageManagement-MIB::alertEEMIVirtualDiskNormal,,,,,,Virtual disk has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.120300,StorageManagement-MIB::alertEEMIVirtualDiskWarning,,,,,,Virtual disk warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.120400,StorageManagement-MIB::alertEEMIVirtualDiskFailure,,,,,,Virtual disk failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.120500,StorageManagement-MIB::alertEEMIVirtualDiskNonRecoverable,,,,,,Virtual disk is non-recoverable.
.1.3.6.1.4.1.674.10893.1.20.200.0.130400,StorageManagement-MIB::alertEEMIRedundancyNormal,,,,,,Redundancy has returned to normal.
.1.3.6.1.4.1.674.10893.1.20.200.0.130500,StorageManagement-MIB::alertEEMIRedundancyDegraded,,,,,,Redundancy has been degraded.
.1.3.6.1.4.1.674.10893.1.20.200.0.130600,StorageManagement-MIB::alertEEMIRedundancyLost,,,,,,Redundancy has been lost.
.1.3.6.1.4.1.674.10893.1.20.200.0.140100,StorageManagement-MIB::alertEEMIFluidCacheDiskInformation,,,,,,Fluid Cache Disk Information
.1.3.6.1.4.1.674.10893.1.20.200.0.140300,StorageManagement-MIB::alertEEMIfluidCacheDiskWarning,,,,,,Fluid Cache Disk warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.140400,StorageManagement-MIB::alertEEMIFluidCacheDisklFailure,,,,,,Fluid Cache Disk failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.150100,StorageManagement-MIB::alertEEMIVirtualDiskPartitionInformation,,,,,,Virtual Disk Partition Information
.1.3.6.1.4.1.674.10893.1.20.200.0.150300,StorageManagement-MIB::alertEEMIVirtualDiskPartitionWarning,,,,,,Virtual Disk Partition warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.150400,StorageManagement-MIB::alertEEMIVirtualDiskPartitionFailure,,,,,,Virtual Disk Partition failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.160100,StorageManagement-MIB::alertEEMIFluidCacheInformation,,,,,,Fluid Cache Information
.1.3.6.1.4.1.674.10893.1.20.200.0.160300,StorageManagement-MIB::alertEEMIfluidCacheWarning,,,,,,Fluid Cache warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.160400,StorageManagement-MIB::alertEEMIFluidCacheFailure,,,,,,Fluid Cache failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.170100,StorageManagement-MIB::alertEEMIFluidCachePoolInformation,,,,,,Fluid Cache Pool Information
.1.3.6.1.4.1.674.10893.1.20.200.0.170300,StorageManagement-MIB::alertEEMIfluidCachePoolWarning,,,,,,Fluid Cache Pool warning.
.1.3.6.1.4.1.674.10893.1.20.200.0.170400,StorageManagement-MIB::alertEEMIFluidCachePoolFailure,,,,,,Fluid Cache Pool failure.
.1.3.6.1.4.1.674.10893.1.20.200.0.170401,StorageManagement-MIB::alertRRWEThresholdSASSATASSD,,,,,,Storage Management Information
.1.3.6.1.4.1.674.10893.1.20.200.0.170402,StorageManagement-MIB::alertRRWEThresholdPCIeSSD,,,,,,Storage Management Information
.1.3.6.1.4.1.674.10893.1.20.200.1,StorageManagement-MIB::messageIDEvent,INTEGER,read-only,,mandatory,,0200.0001 Storage Management alert (event) message number.
.1.3.6.1.4.1.674.10893.1.20.200.2,StorageManagement-MIB::descriptionEvent,OCTET,read-only,,mandatory,,0200.0002 Storage Management event message text describing the alert.
.1.3.6.1.4.1.674.10893.1.20.200.3,StorageManagement-MIB::locationEvent,OCTET,read-only,,mandatory,,0200.0003 Additional information identifying the location of the object causing the alert.
.1.3.6.1.4.1.674.10893.1.20.200.4,StorageManagement-MIB::objectNameEvent,OCTET,read-only,,mandatory,,0200.0004 Name of the object as represented in Storage Management causing the alert.
.1.3.6.1.4.1.674.10893.1.20.200.5,StorageManagement-MIB::objectOIDEvent,OCTET,read-only,,mandatory,,0200.0005 MIB OID of the object causing the alert.
.1.3.6.1.4.1.674.10893.1.20.200.6,StorageManagement-MIB::objectNexusEvent,OCTET,read-only,,mandatory,,0200.0006 Durable, unique ID of the object causing the alert.
.1.3.6.1.4.1.674.10893.1.20.200.7,StorageManagement-MIB::currentStatusEvent,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0007 Current status of object causing the alert, if applicable.
.1.3.6.1.4.1.674.10893.1.20.200.8,StorageManagement-MIB::previousStatusEvent,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):nonCritical(4):critical(5):nonRecoverable(6),0200.0008 Previous status of object causing the alert if applicable.
.1.3.6.1.4.1.674.10893.1.20.200.9,StorageManagement-MIB::enhancedMessageIDEvent,OCTET,read-only,,mandatory,,0200.0001 Enhanced Storage Management Message ID.
.1.3.6.1.4.1.674.10893.1.20.200.10,StorageManagement-MIB::systemFQDNEvent,OCTET,read-only,,mandatory,,0200.0008 System FQDN of object causing the alert if applicable.
.1.3.6.1.4.1.674.10893.1.20.200.11,StorageManagement-MIB::serviceTagEvent,OCTET,read-only,,mandatory,,0200.0008 Service Tag of object causing the alert if applicable.
.1.3.6.1.4.1.674.10893.1.20.200.12,StorageManagement-MIB::chassisServiceTagEvent,OCTET,read-only,,mandatory,,0200.0008 Chassis Service Tag of object causing the alert if applicable.
.1.3.6.1.4.1.674.10895,Dell-Vendor-MIB::dellLan,,,,,,
.1.3.6.1.4.1.674.10895.3000,Dell-Vendor-MIB::powerConnectVendorMIB,,,,,,The private MIB module definition for the Dell Networking Devices. This MIB allows Dell Networking devices to be integrated into Dell ITA management system.
.1.3.6.1.4.1.674.10895.3000.1,Dell-Vendor-MIB::dellVendorMIBObjects,,,,,,
.1.3.6.1.4.1.674.10895.3000.1.2,Dell-Vendor-MIB::hardware,,,,,,
.1.3.6.1.4.1.674.10895.3000.1.2.100,Dell-Vendor-MIB::productIdentification,,,,,,
.1.3.6.1.4.1.674.10895.3000.1.2.100.1,Dell-Vendor-MIB::productIdentificationDisplayName,OCTET,read-only,,current,,Name of this product for display purposes.
.1.3.6.1.4.1.674.10895.3000.1.2.100.2,Dell-Vendor-MIB::productIdentificationDescription,OCTET,read-only,,current,,A short description of this product such as: Ethernet Router Switch.
.1.3.6.1.4.1.674.10895.3000.1.2.100.3,Dell-Vendor-MIB::productIdentificationVendor,OCTET,read-only,,current,,The name of the product manufacturer, such as: Dell Inc.
.1.3.6.1.4.1.674.10895.3000.1.2.100.4,Dell-Vendor-MIB::productIdentificationVersion,OCTET,read-only,,current,,The version of this product.
.1.3.6.1.4.1.674.10895.3000.1.2.100.5,Dell-Vendor-MIB::productIdentificationBuildNumber,OCTET,read-only,,current,,The software build number of the product.
.1.3.6.1.4.1.674.10895.3000.1.2.100.6,Dell-Vendor-MIB::productIdentificationURL,OCTET,read-only,,current,,The URL of the web-based application to manage this device, should the device provide one. The format of the value held by this object is: http://<device IP address>.
.1.3.6.1.4.1.674.10895.3000.1.2.100.7,Dell-Vendor-MIB::productIdentificationDeviceNetworkName,OCTET,read-only,,current,,Device Name.
.1.3.6.1.4.1.674.10895.3000.1.2.100.8,Dell-Vendor-MIB::productIdentificationPerUnitTable,,not-accessible,,current,,Identification specific to product instance and, in case of stackable products, per unit. If the product is not stackable, it will be considered a stack of one unit and therefore this table will contain one conceptual row only.
.1.3.6.1.4.1.674.10895.3000.1.2.100.8.1,Dell-Vendor-MIB::productIdentificationPerUnitEntry,,not-accessible,productIdentificationPerBoxIndex,current,,This row applies to a unit in a stackable product. 
.1.3.6.1.4.1.674.10895.3000.1.2.100.8.1.1,Dell-Vendor-MIB::productIdentificationPerBoxIndex,INTEGER,read-only,,current,,The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product.
.1.3.6.1.4.1.674.10895.3000.1.2.100.8.1.2,Dell-Vendor-MIB::productIdentificationSerialNumber,OCTET,read-only,,current,,Serial number of the product.
.1.3.6.1.4.1.674.10895.3000.1.2.100.8.1.3,Dell-Vendor-MIB::productIdentificationAssetTag,OCTET,read-only,,current,,Asset tag of the product.
.1.3.6.1.4.1.674.10895.3000.1.2.100.8.1.4,Dell-Vendor-MIB::productIdentificationServiceTag,OCTET,read-only,,current,,Service tag of the product.
.1.3.6.1.4.1.674.10895.3000.1.2.100.8.1.6,Dell-Vendor-MIB::productIdentificationBootromVersion,OCTET,read-only,,current,,The boot image version of the product.
.1.3.6.1.4.1.674.10895.3000.1.2.100.9,Dell-Vendor-MIB::productIdentificationBannerMotdAckMode,INTEGER,read-write,,current,enable(1):disable(2),If enable is selected, user will be required to acknowledge the banner displayed on the console. The user would have
.1.3.6.1.4.1.674.10895.3000.1.2.110,Dell-Vendor-MIB::productStatus,,,,,,
.1.3.6.1.4.1.674.10895.3000.1.2.110.1,Dell-Vendor-MIB::productStatusGlobalStatus,INTEGER,read-only,,current,ok(3):non-critical(4):critical(5),Current status of the product.This is a rollup for the entire product. The status is intended to give initiative to a snmp monitor to get further data when this status is abnormal. This variable can take the following values: 3: OK If fans and power supplies are functioning and the system did not reboot because of a HW watchdog failure or a SW fatal error condition. 4: Non-critical If at least one power supply is not functional or the system rebooted at least once because of a HW watchdog failure or a SW fatal error condition. 5: Critical If at least one fan is not functional, possibly causing a dangerous warming up of the device.
.1.3.6.1.4.1.674.10895.3000.1.2.110.2,Dell-Vendor-MIB::productStatusLastGlobalStatus,INTEGER,read-only,,current,ok(3):non-critical(4):critical(5),The status before the current status which induced an initiative to issue a global status change trap.
.1.3.6.1.4.1.674.10895.3000.1.2.110.3,Dell-Vendor-MIB::productStatusTimeStamp,TimeTicks,read-only,,current,,The last time that the product global status has been updated. The time will be given in TimeTicks
.1.3.6.1.4.1.674.10895.3000.1.2.110.4,Dell-Vendor-MIB::productStatusGetTimeOut,INTEGER,read-only,,current,,Suggested time out value in milliseconds for how long the SNMP getter should wait while attempting to poll the product SNMP service.
.1.3.6.1.4.1.674.10895.3000.1.2.110.5,Dell-Vendor-MIB::productStatusRefreshRate,INTEGER,read-only,,current,,Rate in seconds at which the SNMP service cached data is being updated.
.1.3.6.1.4.1.674.10895.3000.1.2.110.6,Dell-Vendor-MIB::productStatusGeneratingTrapsFlag,INTEGER,read-only,,current,true(1):false(2):disabled(3),Indicates if this SNMP service is generating SNMP Traps. This variable can take the following values: 1: true - The device is capable and currently configured to generate traps if necessary. 2: false - The device is not capable of generating traps. 3: disabled - The device is capable but not configured to generate traps. 
.1.3.6.1.4.1.674.10895.3000.1.2.110.7,Dell-Vendor-MIB::productStatusEnvironment,,,,,,
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.1,Dell-Vendor-MIB::envMonFanStatusTable,,not-accessible,,current,,The table of fan status maintained by the environmental monitor. Not Supported by Dell Modular Blade Server switches.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.1.1,Dell-Vendor-MIB::envMonFanStatusEntry,,not-accessible,envMonFanStatusIndex,current,,An entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor.  Not Supported by Dell Modular Blade Server switches.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.1.1.1,Dell-Vendor-MIB::envMonFanStatusIndex,INTEGER,read-only,,current,,Unique index for the fan being instrumented. This index is  for SNMP purposes only, and has no intrinsic meaning. Not  Supported by Dell Modular Blade Server switches.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.1.1.2,Dell-Vendor-MIB::envMonFanStatusDescr,OCTET,read-only,,current,,Textual description of the fan being instrumented. This description is a short textual label, suitable  as a human-sensible identification for the rest of  the information in the entry. Not Supported by Dell  Modular Blade Server switches.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.1.1.3,Dell-Vendor-MIB::envMonFanState,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the fan being instrumented.  Not Supported by Dell Modular Blade Server switches.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.1.1.4,Dell-Vendor-MIB::envMonFanSpeed,INTEGER,read-only,,current,,Speed of the fan being instrumented. Not  Supported by Dell Modular Blade Server switches.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2,Dell-Vendor-MIB::envMonSupplyStatusTable,,not-accessible,,current,,The table of power supply status maintained by the environmental monitor card.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1,Dell-Vendor-MIB::envMonSupplyStatusEntry,,not-accessible,envMonSupplyStatusIndex,current,,An entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1.1,Dell-Vendor-MIB::envMonSupplyStatusIndex,INTEGER,read-only,,current,,Unique index for the power supply being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1.2,Dell-Vendor-MIB::envMonSupplyStatusDescr,OCTET,read-only,,current,,Textual description of the power supply being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1.3,Dell-Vendor-MIB::envMonSupplyState,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notPresent(5):notFunctioning(6),The mandatory state of the power supply being instrumented.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1.4,Dell-Vendor-MIB::envMonSupplySource,INTEGER,read-only,,current,unknown(1):ac(2):dc(3):externalPowerSupply(4):internalRedundant(5),The power supply source. unknown - Power supply source unknown ac - AC power supply dc - DC power supply externalPowerSupply - External power supply internalRedundant - Internal redundant power supply 
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1.5,Dell-Vendor-MIB::envMonSupplyCurrentPower,INTEGER,read-only,,current,,Current power consumption of the power supply being instrumented. 0 - indicates that Current power is not available for related supply.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1.6,Dell-Vendor-MIB::envMonSupplyAveragePower,INTEGER,read-only,,current,,Average power consumption of the power supply being instrumented. 0 - indicates that Average power is not available for related supply.
.1.3.6.1.4.1.674.10895.3000.1.2.110.7.2.1.7,Dell-Vendor-MIB::envMonSupplyAvgStartTime,OCTET,read-only,,current,,The power supply data start. 0 - indicates that power and related start time is not available for supply.
.1.3.6.1.4.1.674.10895.3000.2,Dell-Vendor-MIB::dellVendorNotifications,,,,,,
.1.3.6.1.4.1.674.10895.3000.2.1,Dell-Vendor-MIB::dellVendorTraps,,,,,,
.1.3.6.1.4.1.674.10895.3000.2.1.0,Dell-Vendor-MIB::dellVendorTrapsPrefix,,,,,,
.1.3.6.1.4.1.674.10895.3000.2.1.0.1,Dell-Vendor-MIB::productStatusGlobalStatusChange,,,,,,This trap is sent when the product global status changes.
.1.3.6.1.4.1.674.10895.3010,DELL-REF-MIB::dell6224Switch,,,,,,
.1.3.6.1.4.1.674.10895.3011,DELL-REF-MIB::dell6248Switch,,,,,,
.1.3.6.1.4.1.674.10895.3012,DELL-REF-MIB::dell6224PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3013,DELL-REF-MIB::dell6248PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3014,DELL-REF-MIB::dell6224FSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3015,DELL-REF-MIB::dellM6220Switch,,,,,,
.1.3.6.1.4.1.674.10895.3022,DELL-REF-MIB::dellM8024Switch,,,,,,
.1.3.6.1.4.1.674.10895.3023,DELL-REF-MIB::dell8024Switch,,,,,,
.1.3.6.1.4.1.674.10895.3024,DELL-REF-MIB::dell8024FSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3025,DELL-REF-MIB::dellM6384Switch,,,,,,
.1.3.6.1.4.1.674.10895.3034,DELL-REF-MIB::dell7024Switch,,,,,,
.1.3.6.1.4.1.674.10895.3035,DELL-REF-MIB::dell7048Switch,,,,,,
.1.3.6.1.4.1.674.10895.3036,DELL-REF-MIB::dell7024PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3037,DELL-REF-MIB::dell7048PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3038,DELL-REF-MIB::dell7024FSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3039,DELL-REF-MIB::dell7048RSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3040,DELL-REF-MIB::dell7048RRASwitch,,,,,,
.1.3.6.1.4.1.674.10895.3041,DELL-REF-MIB::dellM8024KSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3042,DELL-REF-MIB::dellN4032Switch,,,,,,
.1.3.6.1.4.1.674.10895.3044,DELL-REF-MIB::dellN4032FSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3045,DELL-REF-MIB::dellN4064Switch,,,,,,
.1.3.6.1.4.1.674.10895.3046,DELL-REF-MIB::dellN4064FSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3053,DELL-REF-MIB::dellN2024Switch,,,,,,
.1.3.6.1.4.1.674.10895.3054,DELL-REF-MIB::dellN2048Switch,,,,,,
.1.3.6.1.4.1.674.10895.3055,DELL-REF-MIB::dellN2024PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3056,DELL-REF-MIB::dellN2048PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3057,DELL-REF-MIB::dellN3024Switch,,,,,,
.1.3.6.1.4.1.674.10895.3058,DELL-REF-MIB::dellN3048Switch,,,,,,
.1.3.6.1.4.1.674.10895.3059,DELL-REF-MIB::dellN3024PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3060,DELL-REF-MIB::dellN3048PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3061,DELL-REF-MIB::dellN3024FSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3063,DELL-REF-MIB::dellN1524Switch,,,,,,
.1.3.6.1.4.1.674.10895.3064,DELL-REF-MIB::dellN1524PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3065,DELL-REF-MIB::dellN1548Switch,,,,,,
.1.3.6.1.4.1.674.10895.3066,DELL-REF-MIB::dellN1548PSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3076,DELL-REF-MIB::dellN3132PXSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3077,DELL-REF-MIB::dellN2128PXSwitch,,,,,,
.1.3.6.1.4.1.674.10895.3084,DELL-REF-MIB::dellN3048EP-ONSwitch,,,,,,
.1.3.6.1.4.1.674.10895.5000,Dell-Vendor-MIB::dellLanStandard,,,,,,
.1.3.6.1.4.1.674.10895.5000.1,Dell-Vendor-MIB::dellLanCommon,,,,,,
.1.3.6.1.4.1.674.10895.5000.2,Dell-Vendor-MIB::dellLanExtension,,,,,,
.1.3.6.1.4.1.674.10895.5000.2.6132,DELL-REF-MIB::lvl7,,,,,,
.1.3.6.1.4.1.674.10895.5000.2.6132.1,DELL-REF-MIB::lvl7Products,,,,,,
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1,DELL-REF-MIB::dnOS,,,,,,
.1.3.6.1.4.1.674.10895.5001,DELL-WLAN-MIB::w-650,,,,,,
.1.3.6.1.4.1.674.10895.5002,DELL-WLAN-MIB::w-651,,,,,,
.1.3.6.1.4.1.674.10895.5003,DELL-WLAN-MIB::w-3200,,,,,,
.1.3.6.1.4.1.674.10895.5004,DELL-WLAN-MIB::w-3400,,,,,,
.1.3.6.1.4.1.674.10895.5005,DELL-WLAN-MIB::w-3600,,,,,,
.1.3.6.1.4.1.674.10895.5006,DELL-WLAN-MIB::w-AP92,,,,,,
.1.3.6.1.4.1.674.10895.5007,DELL-WLAN-MIB::w-AP93,,,,,,
.1.3.6.1.4.1.674.10895.5008,DELL-WLAN-MIB::w-AP105,,,,,,
.1.3.6.1.4.1.674.10895.5009,DELL-WLAN-MIB::w-AP124,,,,,,
.1.3.6.1.4.1.674.10895.5010,DELL-WLAN-MIB::w-AP125,,,,,,
.1.3.6.1.4.1.674.10895.5011,DELL-WLAN-MIB::w-RAP5,,,,,,
.1.3.6.1.4.1.674.10895.5012,DELL-WLAN-MIB::w-RAP5WN,,,,,,
.1.3.6.1.4.1.674.10895.5013,DELL-WLAN-MIB::w-RAP2,,,,,,
.1.3.6.1.4.1.674.10895.5014,DELL-WLAN-MIB::w-620,,,,,,
.1.3.6.1.4.1.674.10895.5015,DELL-WLAN-MIB::w-6000M3,,,,,,
.1.3.6.1.4.1.674.10895.5016,DELL-WLAN-MIB::w-AP68,,,,,,
.1.3.6.1.4.1.674.10895.5017,DELL-WLAN-MIB::w-AP68P,,,,,,
.1.3.6.1.4.1.674.10895.5018,DELL-WLAN-MIB::w-AP175P,,,,,,
.1.3.6.1.4.1.674.10895.5019,DELL-WLAN-MIB::w-AP175AC,,,,,,
.1.3.6.1.4.1.674.10895.5020,DELL-WLAN-MIB::w-AP175DC,,,,,,
.1.3.6.1.4.1.674.10895.5021,DELL-WLAN-MIB::w-AP134,,,,,,
.1.3.6.1.4.1.674.10895.5022,DELL-WLAN-MIB::w-AP135,,,,,,
.1.3.6.1.4.1.674.10895.5023,DELL-WLAN-MIB::w-AP93H,,,,,,
.1.3.6.1.4.1.674.10895.5024,DELL-WLAN-MIB::w-AP104,,,,,,
.1.3.6.1.4.1.674.10895.5025,DELL-WLAN-MIB::w-IAP3WN,,,,,,
.1.3.6.1.4.1.674.10895.5026,DELL-WLAN-MIB::w-IAP3WNP,,,,,,
.1.3.6.1.4.1.674.10895.5027,DELL-WLAN-MIB::w-7210,,,,,,
.1.3.6.1.4.1.674.10895.5028,DELL-WLAN-MIB::w-7220,,,,,,
.1.3.6.1.4.1.674.10895.5029,DELL-WLAN-MIB::w-7240,,,,,,
.1.3.6.1.4.1.674.10895.5031,DELL-WLAN-MIB::w-IAP108,,,,,,
.1.3.6.1.4.1.674.10895.5032,DELL-WLAN-MIB::w-IAP109,,,,,,
.1.3.6.1.4.1.674.10895.5033,DELL-WLAN-MIB::w-AP224,,,,,,
.1.3.6.1.4.1.674.10895.5034,DELL-WLAN-MIB::w-AP225,,,,,,
.1.3.6.1.4.1.674.10895.5035,DELL-WLAN-MIB::w-IAP155,,,,,,
.1.3.6.1.4.1.674.10895.5036,DELL-WLAN-MIB::w-IAP155P,,,,,,
.1.3.6.1.4.1.674.10895.5037,DELL-WLAN-MIB::w-AP114,,,,,,
.1.3.6.1.4.1.674.10895.5038,DELL-WLAN-MIB::w-AP115,,,,,,
.1.3.6.1.4.1.674.10895.5039,DELL-WLAN-MIB::w-AP274,,,,,,
.1.3.6.1.4.1.674.10895.5040,DELL-WLAN-MIB::w-AP275,,,,,,
.1.3.6.1.4.1.674.10895.5041,DELL-WLAN-MIB::w-AP214,,,,,,
.1.3.6.1.4.1.674.10895.5042,DELL-WLAN-MIB::w-AP215,,,,,,
.1.3.6.1.4.1.674.10895.5043,DELL-WLAN-MIB::w-7005,,,,,,
.1.3.6.1.4.1.674.10895.5044,DELL-WLAN-MIB::w-7010,,,,,,
.1.3.6.1.4.1.674.10895.5045,DELL-WLAN-MIB::w-AP103,,,,,,
.1.3.6.1.4.1.674.10895.5046,DELL-WLAN-MIB::w-AP103H,,,,,,
.1.3.6.1.4.1.674.10895.5047,DELL-WLAN-MIB::w-AP204,,,,,,
.1.3.6.1.4.1.674.10895.5048,DELL-WLAN-MIB::w-AP205,,,,,,
.1.3.6.1.4.1.674.10895.5049,DELL-WLAN-MIB::w-7030,,,,,,
.1.3.6.1.4.1.674.10895.5050,DELL-WLAN-MIB::w-7205,,,,,,
.1.3.6.1.4.1.674.10895.5051,DELL-WLAN-MIB::w-7024,,,,,,
.1.3.6.1.4.1.674.10895.5052,DELL-WLAN-MIB::w-AP277,,,,,,
.1.3.6.1.4.1.674.10895.5054,DELL-WLAN-MIB::w-AP228,,,,,,
.1.3.6.1.4.1.674.10895.5055,DELL-WLAN-MIB::w-AP205H,,,,,,
.1.3.6.1.4.1.674.10899,MIB-Dell-CM::cm,,,,,,
.1.3.6.1.4.1.674.10899.1,MIB-Dell-CM::inventoryGroup,,,,,,
.1.3.6.1.4.1.674.10899.1.1,MIB-Dell-CM::inventoryLocale,OCTET,read-only,,mandatory,,This attribute defines the locale for the system.
.1.3.6.1.4.1.674.10899.1.2,MIB-Dell-CM::inventorySchemaVersion,OCTET,read-only,,mandatory,,This attribute defines the version of the inventory schema implemented by this system.
.1.3.6.1.4.1.674.10899.1.3,MIB-Dell-CM::inventorySystemID,OCTET,read-only,,mandatory,,This attribute defines the System ID for the system.
.1.3.6.1.4.1.674.10899.1.5,MIB-Dell-CM::deviceTable,,not-accessible,,mandatory,,This defines a table of versioned devices as inventoried by the product.
.1.3.6.1.4.1.674.10899.1.5.1,MIB-Dell-CM::deviceEntry,,not-accessible,deviceIndex,mandatory,,This defines a row of versioned devices as inventoried by the product.
.1.3.6.1.4.1.674.10899.1.5.1.1,MIB-Dell-CM::deviceIndex,INTEGER,read-only,,mandatory,,This attribute defines the unique index for this device.
.1.3.6.1.4.1.674.10899.1.5.1.2,MIB-Dell-CM::deviceComponentID,INTEGER,read-only,,mandatory,,This attribute defines an optional component id field for the device.
.1.3.6.1.4.1.674.10899.1.5.1.3,MIB-Dell-CM::deviceDisplayString,OCTET,read-only,,mandatory,,This attribute provides a displayable string that describes the device.
.1.3.6.1.4.1.674.10899.1.5.1.4,MIB-Dell-CM::deviceVendorID,OCTET,read-only,,mandatory,,This attribute represents the ID for the vendor supplying the device.
.1.3.6.1.4.1.674.10899.1.5.1.5,MIB-Dell-CM::deviceDeviceID,OCTET,read-only,,mandatory,,This attribute represents the ID for the device.
.1.3.6.1.4.1.674.10899.1.5.1.6,MIB-Dell-CM::deviceSubID,OCTET,read-only,,mandatory,,This attribute provides additional device identification information.
.1.3.6.1.4.1.674.10899.1.5.1.7,MIB-Dell-CM::deviceSubVendorID,OCTET,read-only,,mandatory,,This attribute provides additional vendor identification information.
.1.3.6.1.4.1.674.10899.1.6,MIB-Dell-CM::applicationTable,,not-accessible,,mandatory,,This defines a table of application information for the system.
.1.3.6.1.4.1.674.10899.1.6.1,MIB-Dell-CM::applicationEntry,,not-accessible,applicationIndex,mandatory,,This defines a row of application information for the system.
.1.3.6.1.4.1.674.10899.1.6.1.1,MIB-Dell-CM::applicationIndex,INTEGER,read-only,,mandatory,,This attribute defines the unique index for this application.
.1.3.6.1.4.1.674.10899.1.6.1.2,MIB-Dell-CM::applicationDeviceIndex,INTEGER,read-only,,mandatory,,This attribute defines a cross-index to the device table for the application.
.1.3.6.1.4.1.674.10899.1.6.1.3,MIB-Dell-CM::applicationComponentType,OCTET,read-only,,mandatory,,This attribute identifies the type of application reported.
.1.3.6.1.4.1.674.10899.1.6.1.4,MIB-Dell-CM::applicationVersion,OCTET,read-only,,mandatory,,This attribute identifies the version of the application.
.1.3.6.1.4.1.674.10899.1.6.1.5,MIB-Dell-CM::applicationDisplayString,OCTET,read-only,,mandatory,,This attribute provides a user visible display string that describes the application.
.1.3.6.1.4.1.674.10899.1.6.1.6,MIB-Dell-CM::applicationSubComponentID,OCTET,read-only,,mandatory,,This attribute provides the sub component id for the application. This is usually valid on ESM device reporting.
.1.3.6.1.4.1.674.10899.2,MIB-Dell-CM::operatingSystemGroup,,,,,,
.1.3.6.1.4.1.674.10899.2.1,MIB-Dell-CM::operatingSystemVendor,OCTET,read-only,,mandatory,,This attribute defines the vendor of the Operating System.
.1.3.6.1.4.1.674.10899.2.2,MIB-Dell-CM::operatingSystemMajorVersion,OCTET,read-only,,mandatory,,This attribute defines the major version of the Operating System.
.1.3.6.1.4.1.674.10899.2.3,MIB-Dell-CM::operatingSystemMinorVersion,OCTET,read-only,,mandatory,,This attribute defines the minor version of the Operating System.
.1.3.6.1.4.1.674.10899.2.5,MIB-Dell-CM::operatingSystemSPMajorVersion,OCTET,read-only,,mandatory,,This attribute defines the Operating System's Service Pack major version.
.1.3.6.1.4.1.674.10899.2.6,MIB-Dell-CM::operatingSystemSPMinorVersion,OCTET,read-only,,mandatory,,This attribute defines the Operating System's Service Pack minor version.
.1.3.6.1.4.1.674.10899.2.7,MIB-Dell-CM::operatingSystemArchitecture,OCTET,read-only,,mandatory,,This attribute defines the Operating System's architecture.
.1.3.6.1.4.1.674.10899.100,MIB-Dell-CM::productID,,,,,,
.1.3.6.1.4.1.674.10899.100.1,MIB-Dell-CM::productIDDisplayName,OCTET,read-only,,mandatory,,This attribute defines the display name of the product.
.1.3.6.1.4.1.674.10899.100.2,MIB-Dell-CM::productIDDescription,OCTET,read-only,,mandatory,,This attribute defines a short description of the product.
.1.3.6.1.4.1.674.10899.100.3,MIB-Dell-CM::productIDVendor,OCTET,read-only,,mandatory,,This attribute defines the name of the manufacturer of the product.
.1.3.6.1.4.1.674.10899.100.4,MIB-Dell-CM::productIDVersion,OCTET,read-only,,mandatory,,This attribute defines the version of the product.
.1.3.6.1.4.1.674.10899.100.5,MIB-Dell-CM::productIDBuildNumber,OCTET,read-only,,obsolete,,This attribute defines the software build number of the product.
.1.3.6.1.4.1.674.11000,DELLEMC-OS10-SMI-MIB::enterpriseSW,,,,,,
.1.3.6.1.4.1.674.11000.1000,MIB-Dell-OME::sysMgmtBranch,,,,,,
.1.3.6.1.4.1.674.11000.1000.100,MIB-Dell-OME::omEssentialsMIB,,,,,,
.1.3.6.1.4.1.674.11000.1000.100.1,MIB-Dell-OME::omEssentialsTrap,,,,,,
.1.3.6.1.4.1.674.11000.1000.100.1.0,MIB-Dell-OME::omEssentialsTrap#,,,,,,
.1.3.6.1.4.1.674.11000.1000.100.1.0.1,MIB-Dell-OME::omeTestAlert,,,,,,Test alert forwarded from OM Essentials.
.1.3.6.1.4.1.674.11000.1000.100.1.0.1000,MIB-Dell-OME::omeAlertSystemUp,,,,,,System up message from OM Essentials. Sent when OM Essentials detects a device has come online.
.1.3.6.1.4.1.674.11000.1000.100.1.0.1001,MIB-Dell-OME::omeAlertSystemDown,,,,,,System down message from OM Essentials. Sent when OM Essentials detects a device has gone offline.
.1.3.6.1.4.1.674.11000.1000.100.1.0.2000,MIB-Dell-OME::omeAlertForwardedAlert,,,,,,Forwarded alert from OM Essentials. The event may have originated as an SNMP trap or CIM indication to the OM Essentials Console. The alert format is normalized.
.1.3.6.1.4.1.674.11000.1000.100.1.0.3001,MIB-Dell-OME::omeAlertUnknownStatus,,,,,,System monitoring alert from Essentials. Sent when status of the remote device is Unknown.
.1.3.6.1.4.1.674.11000.1000.100.1.0.3002,MIB-Dell-OME::omeAlertNormalStatus,,,,,,System monitoring alert from Essentials. Sent when status of the remote device is Normal.
.1.3.6.1.4.1.674.11000.1000.100.1.0.3003,MIB-Dell-OME::omeAlertWarningStatus,,,,,,System monitoring alert from Essentials. Sent when status of the remote device is Warning.
.1.3.6.1.4.1.674.11000.1000.100.1.0.3004,MIB-Dell-OME::omeAlertCriticalStatus,,,,,,System monitoring alert from Essentials. Sent when status of the remote device is Critical.
.1.3.6.1.4.1.674.11000.1000.100.1.1,MIB-Dell-OME::omeAlertMessage,OCTET,read-only,,mandatory,,Message in the alert.
.1.3.6.1.4.1.674.11000.1000.100.1.2,MIB-Dell-OME::omeAlertDevice,OCTET,read-only,,mandatory,,Name of the device where alert originated.
.1.3.6.1.4.1.674.11000.1000.100.1.3,MIB-Dell-OME::omeAlertSeverity,OCTET,read-only,,mandatory,,Original severity of the alert.
.1.3.6.1.4.1.674.11000.1000.100.1.4,MIB-Dell-OME::omeAlertDataSources,OCTET,read-only,,mandatory,,List of the data sources for which change in health status has been observed.
.1.3.6.1.4.1.674.11000.1000.100.1.5,MIB-Dell-OME::omeRawAlertInfo,OCTET,read-only,,mandatory,,Message string capturing the overall status update indication. 
.1.3.6.1.4.1.674.11000.2000,FLUIDFS-MIB::storageMgmt,,,,,,
.1.3.6.1.4.1.674.11000.2000.200,FLUIDFS-MIB::fluidFS,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.1,FLUIDFS-MIB::fluidFSProduct,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.1.1,FLUIDFS-MIB::activeDirectoryStatus,,not-accessible,,current,,Active Directory status
.1.3.6.1.4.1.674.11000.2000.200.1.1.1,FLUIDFS-MIB::activeDirectoryStatusEntry,,not-accessible,activeDirectoryStatusTenantId,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.1.1.1,FLUIDFS-MIB::activeDirectoryStatusConfigured,OCTET,read-only,,deprecated,,Indicates whether the cluster is configured to be joined to Active Directory
.1.3.6.1.4.1.674.11000.2000.200.1.1.1.2,FLUIDFS-MIB::activeDirectoryStatusStatus,OCTET,read-only,,deprecated,,Indicates whether the Active Directory is able to access the Domain
.1.3.6.1.4.1.674.11000.2000.200.1.1.1.3,FLUIDFS-MIB::activeDirectoryStatusDomain,OCTET,read-only,,current,,The DNS domain name that the cluster is joined to
.1.3.6.1.4.1.674.11000.2000.200.1.1.1.4,FLUIDFS-MIB::activeDirectoryStatusConfiguredEnumType,,read-only,,current,,Indicates whether the cluster is configured to be joined to Active Directory
.1.3.6.1.4.1.674.11000.2000.200.1.1.1.5,FLUIDFS-MIB::activeDirectoryStatusStatusEnumType,,read-only,,current,,Indicates whether the Active Directory is able to access the Domain
.1.3.6.1.4.1.674.11000.2000.200.1.1.1.6,FLUIDFS-MIB::activeDirectoryStatusTenantId,Integer32,read-only,,current,,Indicates the instance id
.1.3.6.1.4.1.674.11000.2000.200.1.6,FLUIDFS-MIB::fluidFsCifsShare,,not-accessible,,current,, Snmp interface for Example
.1.3.6.1.4.1.674.11000.2000.200.1.6.1,FLUIDFS-MIB::fluidFsCifsShareEntry,,not-accessible,fluidFsCifsShareIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.6.1.1,FLUIDFS-MIB::fluidFsCifsShareIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.6.1.2,FLUIDFS-MIB::fluidFsCifsShareVolumeName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.6.1.3,FLUIDFS-MIB::fluidFsCifsShareShareName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.6.1.4,FLUIDFS-MIB::fluidFsCifsSharePath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.6.1.5,FLUIDFS-MIB::fluidFsCifsShareAccessBasedEnumEnumType,,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.9,FLUIDFS-MIB::clusterName,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.1.9.1,FLUIDFS-MIB::clusterNameClusterName,OCTET,read-only,,current,,FluidFS cluster name
.1.3.6.1.4.1.674.11000.2000.200.1.12,FLUIDFS-MIB::externalServerState,,not-accessible,,current,,Accessibility status to external servers (like: NIS servers, LDAP servers, Antivirus servers, etc.
.1.3.6.1.4.1.674.11000.2000.200.1.12.1,FLUIDFS-MIB::externalServerStateEntry,,not-accessible,externalServerStateIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.12.1.1,FLUIDFS-MIB::externalServerStateIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.12.1.2,FLUIDFS-MIB::externalServerStateHost,OCTET,read-only,,current,,The host name or IP address of the external server
.1.3.6.1.4.1.674.11000.2000.200.1.12.1.3,FLUIDFS-MIB::externalServerStateType,OCTET,read-only,,deprecated,,The type of the external server
.1.3.6.1.4.1.674.11000.2000.200.1.12.1.4,FLUIDFS-MIB::externalServerStateState,OCTET,read-only,,deprecated,,The accessibility status to the external server
.1.3.6.1.4.1.674.11000.2000.200.1.12.1.5,FLUIDFS-MIB::externalServerStateTypeEnumType,,read-only,,current,,The type of the external server
.1.3.6.1.4.1.674.11000.2000.200.1.12.1.6,FLUIDFS-MIB::externalServerStateStateEnumType,,read-only,,current,,The accessibility status to the external server
.1.3.6.1.4.1.674.11000.2000.200.1.16,FLUIDFS-MIB::nASAppliance,,not-accessible,,current,,NAS appliances status
.1.3.6.1.4.1.674.11000.2000.200.1.16.1,FLUIDFS-MIB::nASApplianceEntry,,not-accessible,nASApplianceIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.1,FLUIDFS-MIB::nASApplianceIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.2,FLUIDFS-MIB::nASApplianceId,Integer32,read-only,,current,,The NAS appliance ID
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.3,FLUIDFS-MIB::nASApplianceApplianceServiceTag,OCTET,read-only,,current,,The NAS appliance service tag
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.4,FLUIDFS-MIB::nASApplianceFileSystemMember,OCTET,read-only,,deprecated,,Indicates whether this appliance part of the file-system (or will be)
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.5,FLUIDFS-MIB::nASApplianceStatus,OCTET,read-only,,deprecated,,NAS appliance overall status. Summarizes networks, power, fans, and controllers status
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.6,FLUIDFS-MIB::nASApplianceModel,OCTET,read-only,,deprecated,,NAS appliance platform model
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.7,FLUIDFS-MIB::nASApplianceFileSystemMemberEnumType,,read-only,,current,,Indicates whether this appliance part of the file-system (or will be)
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.8,FLUIDFS-MIB::nASApplianceStatusEnumType,,read-only,,current,,NAS appliance overall status. Summarizes networks, power, fans, and controllers status
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.9,FLUIDFS-MIB::nASApplianceModelEnumType,,read-only,,current,,NAS appliance platform model
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.10,FLUIDFS-MIB::nASApplianceApplianceID,Integer32,read-only,,current,,The appliance number
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.11,FLUIDFS-MIB::nASApplianceWriteThroughModeEnumType,,read-only,,current,,0 - mirroring, 1 - journaling
.1.3.6.1.4.1.674.11000.2000.200.1.16.1.12,FLUIDFS-MIB::nASApplianceWriteCachUsage,Integer32,read-only,,current,,percentage of cache usage
.1.3.6.1.4.1.674.11000.2000.200.1.32,FLUIDFS-MIB::storageSubsystem,,not-accessible,,current,,Accessibility status to storage sub-system
.1.3.6.1.4.1.674.11000.2000.200.1.32.1,FLUIDFS-MIB::storageSubsystemEntry,,not-accessible,storageSubsystemIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.32.1.1,FLUIDFS-MIB::storageSubsystemIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.32.1.2,FLUIDFS-MIB::storageSubsystemLunsAccessibility,OCTET,read-only,,deprecated,,Accessibility status to the storage sub-system
.1.3.6.1.4.1.674.11000.2000.200.1.32.1.3,FLUIDFS-MIB::storageSubsystemLunsAccessibilityEnumType,,read-only,,current,,Accessibility status to the storage sub-system
.1.3.6.1.4.1.674.11000.2000.200.1.36,FLUIDFS-MIB::systemServiceMode,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.1.36.1,FLUIDFS-MIB::systemServiceModeState,OCTET,read-only,,deprecated,,System serviceability mode
.1.3.6.1.4.1.674.11000.2000.200.1.36.2,FLUIDFS-MIB::systemServiceModeStateEnumType,,read-only,,current,,System serviceability mode
.1.3.6.1.4.1.674.11000.2000.200.1.37,FLUIDFS-MIB::systemTrafficStatistics,,not-accessible,,current,,System traffic statistics
.1.3.6.1.4.1.674.11000.2000.200.1.37.1,FLUIDFS-MIB::systemTrafficStatisticsEntry,,not-accessible,systemTrafficStatisticsIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.1,FLUIDFS-MIB::systemTrafficStatisticsIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.2,FLUIDFS-MIB::systemTrafficStatisticsTimestamp,OCTET,read-only,,current,,Timestamp of the system traffic statistics
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.3,FLUIDFS-MIB::systemTrafficStatisticsNFSReadMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was read through NFS protocol in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.4,FLUIDFS-MIB::systemTrafficStatisticsNFSWriteMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was written through NFS protocol in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.5,FLUIDFS-MIB::systemTrafficStatisticsNDMPReadMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was read through NDMP protocol in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.6,FLUIDFS-MIB::systemTrafficStatisticsNDMPWriteMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was written through NDMP protocol in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.7,FLUIDFS-MIB::systemTrafficStatisticsCIFSReadMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was read through CIFS protocol in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.8,FLUIDFS-MIB::systemTrafficStatisticsCIFSWriteMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was written through CIFS protocol in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.9,FLUIDFS-MIB::systemTrafficStatisticsReplicationReadMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was read by the replication process in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.10,FLUIDFS-MIB::systemTrafficStatisticsReplicationWriteMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was written by the replication process in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.11,FLUIDFS-MIB::systemTrafficStatisticsNetworkOverheadReadMBsPerSec,Integer32,read-only,,current,,Amount of outgoing network overhead (in MBs) in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.12,FLUIDFS-MIB::systemTrafficStatisticsNetworkOverheadWriteMBsPerSec,Integer32,read-only,,current,,Amount of incoming network overhead (in MBs) in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.13,FLUIDFS-MIB::systemTrafficStatisticsStorageSubSystemReadMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was read from the storage sub-system in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.14,FLUIDFS-MIB::systemTrafficStatisticsStorageSubSystemWriteMBsPerSec,Integer32,read-only,,current,,Amount of data (in MBs) that was written to the storage sub-system in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.15,FLUIDFS-MIB::systemTrafficStatisticsNFSIOPSRead,Integer32,read-only,,current,,Number of NFS read IO operations in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.16,FLUIDFS-MIB::systemTrafficStatisticsNFSIOPSWrite,Integer32,read-only,,current,,Number of NFS write IO operations in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.17,FLUIDFS-MIB::systemTrafficStatisticsNFSIOPSOther,Integer32,read-only,,current,,Number of NFS IO operations (except read and write) in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.18,FLUIDFS-MIB::systemTrafficStatisticsCIFSIOPSRead,Integer32,read-only,,current,,Number of CIFS read IO operations in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.19,FLUIDFS-MIB::systemTrafficStatisticsCIFSIOPSWrite,Integer32,read-only,,current,,Number of CIFS write IO operations in one second
.1.3.6.1.4.1.674.11000.2000.200.1.37.1.20,FLUIDFS-MIB::systemTrafficStatisticsCIFSIOPSOther,Integer32,read-only,,current,,Number of CIFS IO operations (except read and write) in one second
.1.3.6.1.4.1.674.11000.2000.200.1.38,FLUIDFS-MIB::nASPool,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.1.38.1,FLUIDFS-MIB::nASPoolTotalCapacityMB,OCTET,read-only,,current,,Total NAS pool capacity (in MBs)
.1.3.6.1.4.1.674.11000.2000.200.1.38.2,FLUIDFS-MIB::nASPoolTotalReservedMB,OCTET,read-only,,current,,Amount of NAS volumes reserved space (in MBs) from the entire NAS pool
.1.3.6.1.4.1.674.11000.2000.200.1.38.3,FLUIDFS-MIB::nASPoolTotalUsedMB,OCTET,read-only,,current,,Amount of used space (in MBs) in all NAS volumes
.1.3.6.1.4.1.674.11000.2000.200.1.38.4,FLUIDFS-MIB::nASPoolTotalUnusedMB,OCTET,read-only,,current,,Amount of unused space (in MBs) in all NAS volumes
.1.3.6.1.4.1.674.11000.2000.200.1.38.5,FLUIDFS-MIB::nASPoolTotalUnusedReservedMB,OCTET,read-only,,current,,Amount of unused reserved space (in MBs) in all NAS volumes
.1.3.6.1.4.1.674.11000.2000.200.1.38.6,FLUIDFS-MIB::nASPoolTotalUnusedUnreservedMB,OCTET,read-only,,current,,Amount of unused unreserved space (in MBs) in all NAS volumes
.1.3.6.1.4.1.674.11000.2000.200.1.38.7,FLUIDFS-MIB::nASPoolTotalOverCommittedMB,OCTET,read-only,,current,,Amount of over committed space (in MBs) in all NAS volumes
.1.3.6.1.4.1.674.11000.2000.200.1.38.8,FLUIDFS-MIB::nASPoolTotalOptimizationSavedSpaceMB,OCTET,read-only,,current,,Amount of data (in MBs) which was saved by the data reduction
.1.3.6.1.4.1.674.11000.2000.200.1.38.9,FLUIDFS-MIB::nASPoolNumberOfVirtualVolumes,Integer32,read-only,,current,,Total number of NAS volumes
.1.3.6.1.4.1.674.11000.2000.200.1.38.10,FLUIDFS-MIB::nASPoolNumberOfVirtualVolumesWithSnapshots,Integer32,read-only,,current,,Number of NAS volumes which have snapshots
.1.3.6.1.4.1.674.11000.2000.200.1.38.11,FLUIDFS-MIB::nASPoolNumberOfVirtualVolumesWithReplication,Integer32,read-only,,current,,Number of NAS volumes which part of the replication (as source or destination NAS volume)
.1.3.6.1.4.1.674.11000.2000.200.1.38.12,FLUIDFS-MIB::nASPoolNumberOfVirtualVolumesWithDataReduction,Integer32,read-only,,current,,Number of NAS volumes which are defined with data reduction
.1.3.6.1.4.1.674.11000.2000.200.1.38.13,FLUIDFS-MIB::nASPoolNumberOfNfsExports,Integer32,read-only,,current,,Total number of NFS exports
.1.3.6.1.4.1.674.11000.2000.200.1.38.14,FLUIDFS-MIB::nASPoolNumberOfCifsShares,Integer32,read-only,,current,,Total number of CIFS shares
.1.3.6.1.4.1.674.11000.2000.200.1.38.15,FLUIDFS-MIB::nASPoolNumberOfSnapshots,Integer32,read-only,,current,,Total number of snapshots
.1.3.6.1.4.1.674.11000.2000.200.1.38.16,FLUIDFS-MIB::nASPoolNumberOfClonedVolumes,Integer32,read-only,,current,,Total number of cloned NAS volumes
.1.3.6.1.4.1.674.11000.2000.200.1.39,FLUIDFS-MIB::clusterPartenrships,,not-accessible,,current,,Cluster partnerships
.1.3.6.1.4.1.674.11000.2000.200.1.39.1,FLUIDFS-MIB::clusterPartenrshipsEntry,,not-accessible,clusterPartenrshipsIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.39.1.1,FLUIDFS-MIB::clusterPartenrshipsIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.39.1.2,FLUIDFS-MIB::clusterPartenrshipsClusterName,OCTET,read-only,,current,,Name of the the partner cluster
.1.3.6.1.4.1.674.11000.2000.200.1.39.1.3,FLUIDFS-MIB::clusterPartenrshipsClusterIP,OCTET,read-only,,current,,IP address of the partner cluster
.1.3.6.1.4.1.674.11000.2000.200.1.39.1.4,FLUIDFS-MIB::clusterPartenrshipsStatus,OCTET,read-only,,deprecated,,Accessibility status to the partner cluster
.1.3.6.1.4.1.674.11000.2000.200.1.39.1.6,FLUIDFS-MIB::clusterPartenrshipsStatusEnumType,,read-only,,current,,Accessibility status to the partner cluster
.1.3.6.1.4.1.674.11000.2000.200.1.41,FLUIDFS-MIB::nASVolume,,not-accessible,,current,,NAS volumes status
.1.3.6.1.4.1.674.11000.2000.200.1.41.1,FLUIDFS-MIB::nASVolumeEntry,,not-accessible,nASVolumeIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.1,FLUIDFS-MIB::nASVolumeIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.2,FLUIDFS-MIB::nASVolumeVolumeName,OCTET,read-only,,current,,NAS volume name
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.3,FLUIDFS-MIB::nASVolumeSizeMB,OCTET,read-only,,current,,The size of the NAS volume (in MB)
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.4,FLUIDFS-MIB::nASVolumeUsedSpaceMB,OCTET,read-only,,current,,The used space of the NAS volume (in MB)
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.5,FLUIDFS-MIB::nASVolumeSecurityStyleEnumType,,read-only,,current,,Defines how the system will maintain and verify file access security. Set to NTFS to have file access governed by NT ACL in all of the protocols. Set to UNIX to have file access governed by UNIX permissions in all of the protocols
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.6,FLUIDFS-MIB::nASVolumeIsCloneEnumType,,read-only,,current,,Indicates whether this volume is clone or not
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.7,FLUIDFS-MIB::nASVolumeMetadataRedundancyEnabledEnumType,,read-only,,current,,Enable meta data redundancy feature for better resilience or disable for higher performance volume
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.8,FLUIDFS-MIB::nASVolumeOptimizationSavedSpaceMB,OCTET,read-only,,current,,Space saved by optimization for this virtual volume (in MB). This should vary between the used space size and 0
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.9,FLUIDFS-MIB::nASVolumeNumberOfSnapshots,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.41.1.10,FLUIDFS-MIB::nASVolumeReplicationStatusEnumType,,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.46,FLUIDFS-MIB::fluidFsNfsExport,,not-accessible,,current,, Snmp interface for Example
.1.3.6.1.4.1.674.11000.2000.200.1.46.1,FLUIDFS-MIB::fluidFsNfsExportEntry,,not-accessible,fluidFsNfsExportIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.46.1.1,FLUIDFS-MIB::fluidFsNfsExportIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.46.1.2,FLUIDFS-MIB::fluidFsNfsExportVolumeName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.46.1.3,FLUIDFS-MIB::fluidFsNfsExportPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.47,FLUIDFS-MIB::version,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.1.47.1,FLUIDFS-MIB::versionVersion,OCTET,read-only,,current,,Current version of FluidFS
.1.3.6.1.4.1.674.11000.2000.200.1.47.2,FLUIDFS-MIB::versionProductName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.47.3,FLUIDFS-MIB::versionProductDescription,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.47.4,FLUIDFS-MIB::versionProductVendor,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.99999,FLUIDFS-MIB::example,,not-accessible,,current,, Snmp interface for Example
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1,FLUIDFS-MIB::exampleEntry,,not-accessible,exampleIndex,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.1,FLUIDFS-MIB::exampleIndex,Integer32,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.2,FLUIDFS-MIB::exampleShareName,OCTET,read-only,,current,,Snmp key for Example.ShareName
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.3,FLUIDFS-MIB::examplePath,OCTET,read-only,,current,,Snmp key for Example.Path
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.4,FLUIDFS-MIB::exampleComment,OCTET,read-only,,current,,Snmp key for Example.Comment
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.5,FLUIDFS-MIB::exampleHideFiles,OCTET,read-only,,current,,Snmp key for Example.HideFiles
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.6,FLUIDFS-MIB::exampleAllowGuests,OCTET,read-only,,deprecated,,Snmp key for Example.AllowGuests
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.7,FLUIDFS-MIB::exampleLocking,OCTET,read-only,,deprecated,,Snmp key for Example.Locking
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.8,FLUIDFS-MIB::exampleAntiVirus,OCTET,read-only,,deprecated,,Snmp key for Example.AntiVirus
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.9,FLUIDFS-MIB::exampleAvPolicy,OCTET,read-only,,deprecated,,Snmp key for Example.AvPolicy
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.10,FLUIDFS-MIB::exampleAvExtensions,OCTET,read-only,,deprecated,,Snmp key for Example.AvExtensions
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.11,FLUIDFS-MIB::exampleAvExtensionsPolicy,OCTET,read-only,,deprecated,,Snmp key for Example.AvExtensionsPolicy
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.12,FLUIDFS-MIB::exampleAvExcludeDirs,OCTET,read-only,,current,,Snmp key for Example.AvExcludeDirs
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.13,FLUIDFS-MIB::exampleGenericField,Integer32,read-only,,current,,Snmp key for Example.GenericField
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.14,FLUIDFS-MIB::exampleAllowGuestsEnumType,,read-only,,current,,Snmp key for Example.AllowGuests
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.15,FLUIDFS-MIB::exampleLockingEnumType,,read-only,,current,,Snmp key for Example.Locking
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.16,FLUIDFS-MIB::exampleAntiVirusEnumType,,read-only,,current,,Snmp key for Example.AntiVirus
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.17,FLUIDFS-MIB::exampleAvPolicyEnumType,,read-only,,current,,Snmp key for Example.AvPolicy
.1.3.6.1.4.1.674.11000.2000.200.1.99999.1.19,FLUIDFS-MIB::exampleAvExtensionsPolicyEnumType,,read-only,,current,,Snmp key for Example.AvExtensionsPolicy
.1.3.6.1.4.1.674.11000.2000.200.1.99999.20,FLUIDFS-MIB::exampleStaticValue,OCTET,read-only,,current,,Example of static value
.1.3.6.1.4.1.674.11000.2000.200.1.99999.21,FLUIDFS-MIB::exampleRestrictedStaticValue1,OCTET,read-only,,current,,Example of restricted static value 1
.1.3.6.1.4.1.674.11000.2000.200.1.99999.22,FLUIDFS-MIB::exampleRestrictedStaticValue2,OCTET,read-only,,current,,Example of restricted static value 2
.1.3.6.1.4.1.674.11000.2000.200.1.99999.23,FLUIDFS-MIB::exampleRestrictedStaticValue3,OCTET,read-only,,current,,Example of restricted static value 3
.1.3.6.1.4.1.674.11000.2000.200.1.99999.24,FLUIDFS-MIB::exampleRestrictedStaticValue4,OCTET,read-only,,current,,Example of restricted static value 4
.1.3.6.1.4.1.674.11000.2000.200.2,FluidFS-MIB::fluidFSCluster,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.2.1,FluidFS-MIB::fluidFSCluName,OCTET,read-write,,current,,The name of the cluster.
.1.3.6.1.4.1.674.11000.2000.200.2.4,FluidFS-MIB::anonymous#0,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.2.4.1,FluidFS-MIB::anonymous#1,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.2.4.1.2,FluidFS-MIB::fluidFSCluNodeName,OCTET,read-only,,current,,The name of the node.
.1.3.6.1.4.1.674.11000.2000.200.2.5,FluidFS-MIB::anonymous#4,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.2.5.1,FluidFS-MIB::anonymous#5,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.2.5.1.2,FluidFS-MIB::fluidFSCluResourceName,OCTET,read-only,,current,,The name of the resource. It must be unique within the cluster.
.1.3.6.1.4.1.674.11000.2000.200.2.5.1.4,FluidFS-MIB::fluidFSCluResourceOwnerNode,OCTET,read-only,,current,,The node in the cluster where the group of the resource is
.1.3.6.1.4.1.674.11000.2000.200.10,FluidFS-MIB::fluidFSGenEventDesc,OCTET,read-only,,current,,A string describing the general event.
.1.3.6.1.4.1.674.11000.2000.200.11,FluidFS-MIB::fluidFSFileName,OCTET,read-only,,current,,The file name.
.1.3.6.1.4.1.674.11000.2000.200.20,FluidFS-MIB::fluidFSEvents,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.1,FluidFS-MIB::fluidFSEventsAdmin,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.1.1,FluidFS-MIB::fluidFSEventAdminGeneralFutureTenantScopeEventInfo,,,,,,Tenant scope event. Tenant {{TenantName}} (ID={{TenantId}}): {{generalEventText}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.11,FluidFS-MIB::fluidFSEventAdminGeneralFutureVolumeScopeEventInfo,,,,,,NAS Volume scope event. NAS Volume {{VolumeName}} (ID={{FSID}}): {{generalEventText}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.102,FluidFS-MIB::fluidFSEventAdminPauseReplication,,,,,,The user {{username}} paused the replication from {{replicationSource}} to {{replicationDestination}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.103,FluidFS-MIB::fluidFSEventAdminResumeReplication,,,,,,The user {{username}} resumed the replication from {{replicationSource}} to {{replicationDestination}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.104,FluidFS-MIB::fluidFSEventAdminStartedImmediateReplication,,,,,,The user {{username}} started immediate replication from {{replicationSource}} to {{replicationDestination}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.105,FluidFS-MIB::fluidFSEventAdminDetachReplication,,,,,,The user {{username}} detached the destination NAS volume {{replicationDestination}} from source NAS volume {{replicationSource}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.106,FluidFS-MIB::fluidFSEventAdminAttachReplication,,,,,,The user {{username}} attached the destination NAS volume {{replicationDestinationVolume}}@{{replicationDestinationCluster}} to NAS volume {{replicationSourceVolume}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.110,FluidFS-MIB::fluidFSEventAdminAddTrustedCluster,,,,,,The user {{username}} added a new replication partner named {{trustedCluster}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.111,FluidFS-MIB::fluidFSEventAdminUpdateTrustedClusterConf,,,,,,The user {{username}} updated the replication partner configuration for {{trustedCluster}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.112,FluidFS-MIB::fluidFSEventAdminRemoveTrustedCluster,,,,,,The user {{username}} removed the cluster {{trustedCluster}} from the list of replication partners.
.1.3.6.1.4.1.674.11000.2000.200.20.1.122,FluidFS-MIB::fluidFSEventAdminSpInstalled,,,,,,{{packageName}} bundle installation completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.1.154,FluidFS-MIB::fluidFSEventAdminServicePackStarted,,,,,,Firmware DellFluidFS-{{spVersion}} installation started Description: Firmware DellFluidFS-{{spVersion}} installation started Action Items: You should follow the installation process in the CLI / WUI and the event log to verify it successfully completes
.1.3.6.1.4.1.674.11000.2000.200.20.1.155,FluidFS-MIB::fluidFSEventAdminServicePackFailed,,,,,,Firmware DellFluidFS-{{spVersion}} failed to install. Description: Firmware DellFluidFS-{{spVersion}} failed to install, reason: {{spError}}. Action Items: System may be in inconsistent state, please check system validation in CLI / WUI.[[nl]]If system is in unstable state (i.e. some controllers are reported down) then escalate to resolve the situation.
.1.3.6.1.4.1.674.11000.2000.200.20.1.156,FluidFS-MIB::fluidFSEventAdminServicePackFinished,,,,,,Successfully upgraded to firmware DellFluidFS-{{spVersion}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.162,FluidFS-MIB::fluidFSEventAdminGeneralFutureEventInfo,,,,,,{{generalEventText}}
.1.3.6.1.4.1.674.11000.2000.200.20.1.163,FluidFS-MIB::fluidFSEventAdminGeneralFutureEventMajor,,,,,,{{generalEventText}}
.1.3.6.1.4.1.674.11000.2000.200.20.1.164,FluidFS-MIB::fluidFSEventAdminGeneralFutureEventCrit,,,,,,{{generalEventText}}
.1.3.6.1.4.1.674.11000.2000.200.20.1.165,FluidFS-MIB::fluidFSEventAdminGeneralFutureEventWarning,,,,,,{{generalEventText}}
.1.3.6.1.4.1.674.11000.2000.200.20.1.167,FluidFS-MIB::fluidFSEventAdminCancelReplication,,,,,,{{username}} cancelled the replication from {{replicationSource}} to {{replicationDestination}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.170,FluidFS-MIB::fluidFSEventAdminDisableReplication,,,,,,Replication-policy of NAS volumes {{replicationSource}} and {{replicationDestination}} was disabled. Description: The user {{username}} disabled the replication-policy of the destination NAS volume {{replicationDestination}} and the source NAS volume {{replicationSource}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.171,FluidFS-MIB::fluidFSEventAdminEnableReplication,,,,,,Replication-policy of NAS volumes {{replicationSourceVolume}} and {{replicationDestinationVolume}} was enabled. Description: The user {{username}} enabled replication: re-attached NAS volume {{replicationDestinationVolume}} on cluster {{replicationDestinationCluster}} to local NAS volume {{replicationSourceVolume}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.180,FluidFS-MIB::fluidFSEventAdminAdminLoggedInToInterface,,,,,,The user {{username}} logged in to {{ui}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.181,FluidFS-MIB::fluidFSEventAdminFormatFileSystemMkfsFailed,,,,,,Format failed during execution of File System Structures Initialization phase. Internal Information: mkfs.sh failed with error code {{ErrCode}}
.1.3.6.1.4.1.674.11000.2000.200.20.1.182,FluidFS-MIB::fluidFSEventAdminIncrementalFormatFileSystemMkfsFailed,,,,,,Incremental Format failed during execution of File System Structures Initialization phase. Internal Information: mkfs.sh failed with error code {{ErrCode}}
.1.3.6.1.4.1.674.11000.2000.200.20.1.185,FluidFS-MIB::fluidFSEventAdminControllerAutoAttachStart,,,,,,Auto attach of NAS controller {{controllerId}} in appliance {{applianceId}} has started. Action Items: You should follow the attachment process in the CLI / WUI to verify it successfully completes.
.1.3.6.1.4.1.674.11000.2000.200.20.1.186,FluidFS-MIB::fluidFSEventAdminControllerAutoDetachStart,,,,,,Auto detach of NAS controller {{controllerId}} in appliance {{applianceId}} has started. Action Items: You should follow the detachment process in the CLI / WUI to verify it successfully completes.
.1.3.6.1.4.1.674.11000.2000.200.20.1.187,FluidFS-MIB::fluidFSEventAdminApplianceCreateStart,,,,,,Create of NAS Appliance {{applianceId}} ({{applianceServiceTag}}) has started. Action Items: You should follow the appliance create process in the CLI / WUI to verify it successfully completes.
.1.3.6.1.4.1.674.11000.2000.200.20.1.188,FluidFS-MIB::fluidFSEventAdminEnableEscalationAccess,,,,,,Escalation access was enabled for {{escalationPeriodInMinutes}} minutes.
.1.3.6.1.4.1.674.11000.2000.200.20.1.189,FluidFS-MIB::fluidFSEventAdminConfigurationObjectSoftLimitExceeded,,,,,,User {{username}} created {{objectName}} exceeding the maximum recommended count {{recommendedMaxCount}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.190,FluidFS-MIB::fluidFSEventAdminControllerAttachStart,,,,,,Attach of NAS controller {{controllerId}} has started by {{username}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.191,FluidFS-MIB::fluidFSEventAdminControllerAttachEnd,,,,,,Attach of NAS controller {{controllerId}} has completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.1.192,FluidFS-MIB::fluidFSEventAdminControllerDetachStart,,,,,,Detach of NAS controller {{controllerId}} was started by {{username}}.
.1.3.6.1.4.1.674.11000.2000.200.20.1.193,FluidFS-MIB::fluidFSEventAdminControllerDetachEnd,,,,,,Detach of NAS controller {{controllerId}} has completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.1.194,FluidFS-MIB::fluidFSEventAdminApplianceJoinStart,,,,,,Join of NAS Appliance {{applianceId}} was started by {{username}}. Action Items: You should follow the appliance join process in the CLI / WUI to verify it successfully completes.
.1.3.6.1.4.1.674.11000.2000.200.20.1.195,FluidFS-MIB::fluidFSEventAdminApplianceJoinEnd,,,,,,Join of NAS Appliance {{applianceId}} has completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.2,FluidFS-MIB::fluidFSEventsHardware,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.2.1,FluidFS-MIB::fluidFSEventHardwareNoPacketLossInSubnetHost,,,,,,NAS Controller {{nodeId}} has no packet loss to host {{hostName}} on {{subnetName}} subnet.
.1.3.6.1.4.1.674.11000.2000.200.20.2.4,FluidFS-MIB::fluidFSEventHardwarePacketLossInSubnet,,,,,,NAS Controller {{nodeId}} had packet loss to {{subnetName}}. Description: NAS Controller {{nodeId}} had {{packetLoss}}% packet loss to IP address {{subnetName}} on host {{hostName}}. Subnet identifier {{network_id}}, prefix {{prefix}}, vlan tag id {{vlanTag}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.6,FluidFS-MIB::fluidFSEventHardwareNoPacketLossInSubnet,,,,,,NAS Controller {{nodeId}} has no packet loss on {{subnetName}}. Description: NAS Controller {{nodeId}} has no packet loss to IP address {{subnetName}} on host {{hostName}}. Subnet identifier {{network_id}}, prefix {{prefix}}, vlan tag id {{vlanTag}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.7,FluidFS-MIB::fluidFSEventHardwareNoPacketLossJumboInSubnetHost,,,,,,NAS Controller {{nodeId}} has no packet loss (using jumbo frames) to host {{hostName}} on {{subnetName}} subnet.
.1.3.6.1.4.1.674.11000.2000.200.20.2.8,FluidFS-MIB::fluidFSEventHardwarePacketLossJumboInSubnet,,,,,,NAS Controller {{nodeId}} had jumbo packet loss. Description: NAS Controller {{nodeId}} had {{packetLoss}}% packet loss to IP address {{subnetName}} on host {{hostName}} (using jumbo frames). Subnet identifier {{network_id}}, prefix {{prefix}}, vlan tag id {{vlanTag}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.12,FluidFS-MIB::fluidFSEventHardwareNoPacketLossJumboInSubnet,,,,,,NAS Controller {{nodeId}} has no jumbo packet loss. Description: NAS Controller {{nodeId}} has no packet loss to IP address {{subnetName}} on host {{hostName}} (using jumbo frames). Subnet identifier {{network_id}}, prefix {{prefix}}, vlan tag id {{vlanTag}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.13,FluidFS-MIB::fluidFSEventHardwareCantReachSubnet,,,,,,NAS Controller {{nodeId}} cannot reach IP {{subnetName}} Description: NAS Controller {{nodeId}} cannot reach IP address {{subnetName}} on host {{hostName}}. Subnet identifier {{network_id}}, prefix {{prefix}}, vlan tag id {{vlanTag}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.18,FluidFS-MIB::fluidFSEventHardwareCantReachJumboSubnet,,,,,,NAS Controller {{nodeId}} cannot reach IP using (jumbo frames) Description: NAS Controller {{nodeId}} cannot reach IP address {{subnetName}} on host {{hostName}} (using jumbo frames). Subnet identifier {{network_id}}, prefix {{prefix}}, vlan tag id {{vlanTag}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.35,FluidFS-MIB::fluidFSEventHardwareEthHasErrors,,,,,,{{ethName}} (part of {{bondName}}) on NAS Controller {{nodeId}} has errors.
.1.3.6.1.4.1.674.11000.2000.200.20.2.36,FluidFS-MIB::fluidFSEventHardwareEthHasDrops,,,,,,{{ethName}} (part of {{bondName}}) on NAS Controller {{nodeId}} has drops.
.1.3.6.1.4.1.674.11000.2000.200.20.2.38,FluidFS-MIB::fluidFSEventHardwareCantReachDefaultGateway,,,,,,NAS Controller{{nodeId}} cannot reach default gateway {{ip}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.39,FluidFS-MIB::fluidFSEventHardwareCanReachDefaultGateway,,,,,,NAS Controller{{nodeId}} can reach default gateway {{ip}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.56,FluidFS-MIB::fluidFSEventHardwarePacketLossInSubnetHost,,,,,,NAS Controller {{nodeId}} had {{packetLoss}}% packet loss to host {{hostName}} on {{subnetName}} subnet.
.1.3.6.1.4.1.674.11000.2000.200.20.2.57,FluidFS-MIB::fluidFSEventHardwareNoLinkInEthOnController,,,,,,Eth{{ethName}} which belongs to NAS Controller {{nodeId}} is down.
.1.3.6.1.4.1.674.11000.2000.200.20.2.58,FluidFS-MIB::fluidFSEventHardwareEthLinkRestoredOnController,,,,,,Eth{{ethName}} which belongs to NAS Controller {{nodeId}} is restored.
.1.3.6.1.4.1.674.11000.2000.200.20.2.59,FluidFS-MIB::fluidFSEventHardwarePacketLossJumboInSubnetHost,,,,,,NAS Controller {{nodeId}} had {{packetLoss}}% packet loss (using jumbo frames) to host {{hostName}} on {{subnetName}} subnet.
.1.3.6.1.4.1.674.11000.2000.200.20.2.60,FluidFS-MIB::fluidFSEventHardwareCantReachSubnetHost,,,,,,NAS Controller {{nodeId}} cannot reach host {{hostName}} on {{subnetName}} subnet.
.1.3.6.1.4.1.674.11000.2000.200.20.2.61,FluidFS-MIB::fluidFSEventHardwareCantReachJumboSubnetHost,,,,,,NAS Controller {{nodeId}} cannot reach (using jumbo frames) host {{hostName}} on {{subnetName}} subnet.
.1.3.6.1.4.1.674.11000.2000.200.20.2.109,FluidFS-MIB::fluidFSEventHardwareBpsAccessibilityNormal,,,,,,NAS Controller{{nodeId}} BPS reachability is back to normal (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.110,FluidFS-MIB::fluidFSEventHardwareBpsNormal,,,,,,BPS on NAS Controller{{nodeId}} is back to normal operation. Charge is {{bpsBatteryCharge}}% (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.120,FluidFS-MIB::fluidFSEventHardwareProcessorCoresCountFailed,,,,,,Failed to validate CPU cores count is equal in NAS Controller {{firstNodeId}} and NAS Controller {{secondNodeId}} (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.121,FluidFS-MIB::fluidFSEventHardwareProcessorCoresCountOk,,,,,,CPU cores count test successful. Count is equal in NAS Controller {{firstNodeId}} and NAS Controller {{secondNodeId}} (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.124,FluidFS-MIB::fluidFSEventHardwareMemoryNotOptimal,,,,,,Memory device status in NAS Controller{{nodeId}} is not optimal (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.125,FluidFS-MIB::fluidFSEventHardwareMemoryError,,,,,,Memory device status in NAS Controller{{nodeId}} is critical (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.126,FluidFS-MIB::fluidFSEventHardwareMemoryBackToNormal,,,,,,Memory device in NAS Controller{{nodeId}} returned to normal operation (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.127,FluidFS-MIB::fluidFSEventHardwareMemoryTempWarn,,,,,,Memory device temperature sensors in NAS Controller{{nodeId}} report warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.128,FluidFS-MIB::fluidFSEventHardwareMemoryTempNormal,,,,,,Memory device temperature sensors in NAS Controller{{nodeId}} report normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.129,FluidFS-MIB::fluidFSEventHardwareMemoryTempCritical,,,,,,Memory device temperature sensors in NAS Controller{{nodeId}} report critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.130,FluidFS-MIB::fluidFSEventHardwareMemorySizeCountFailed,,,,,,Failed to validate memory size is equal in NAS Controller {{firstNodeId}} and NAS Controller {{secondNodeId}} (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.131,FluidFS-MIB::fluidFSEventHardwareMemorySizeCountOk,,,,,,Memory size test successful. Size is equal in NAS Controller {{firstNodeId}} and NAS Controller {{secondNodeId}} (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.132,FluidFS-MIB::fluidFSEventHardwareMemoryInfoNotAvailable,,,,,,Memory device status in NAS Controller{{nodeId}} is not available. Internal error in memory monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.133,FluidFS-MIB::fluidFSEventHardwareMemoryInfoIsAvailable,,,,,,Memory device status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.135,FluidFS-MIB::fluidFSEventHardwareControllerStatusNotAvailable,,,,,,NAS Controller{{nodeId}} hardware status is not available. Internal error in controller status analysis (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.136,FluidFS-MIB::fluidFSEventHardwareControllerStatusAvailable,,,,,,NAS Controller{{nodeId}} hardware status is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.143,FluidFS-MIB::fluidFSEventHardwareLocalDisksInfoNotAvailable,,,,,,Local storage status in NAS Controller{{nodeId}} is not available. S.M.A.R.T. info is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.144,FluidFS-MIB::fluidFSEventHardwareLocalDisksInfoIsAvailable,,,,,,Local storage status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.153,FluidFS-MIB::fluidFSEventHardwareApplianceIntrusionWarning,,,,,,Chassis cover for NAS Appliance{{applianceId}} is open (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.154,FluidFS-MIB::fluidFSEventHardwareApplianceIntrusionOk,,,,,,Chassis cover for NAS Controller {{applianceId}} was closed (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.168,FluidFS-MIB::fluidFSEventHardwareAppFanSystemInfoNotAvailable,,,,,,Fans set overall status in NAS Appliance {{applianceId}} is not available. Internal error in fans monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.169,FluidFS-MIB::fluidFSEventHardwareAppFanSystemInfoIsAvailable,,,,,,Fans set overall status in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.170,FluidFS-MIB::fluidFSEventHardwareAppFanError,,,,,,Fan {{componentName}} in NAS Appliance {{applianceId}} has critical status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.171,FluidFS-MIB::fluidFSEventHardwareAppFanWarning,,,,,,Fan {{componentName}} in NAS Appliance {{applianceId}} has warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.172,FluidFS-MIB::fluidFSEventHardwareAppFanBackToNormal,,,,,,Fan {{componentName}} in NAS Appliance {{applianceId}} returned to normal operation (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.173,FluidFS-MIB::fluidFSEventHardwareAppFanInfoNotAvailable,,,,,,Fan {{componentName}} status in NAS Appliance {{applianceId}} is not available. Internal error in fans monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.174,FluidFS-MIB::fluidFSEventHardwareAppFanInfoIsAvailable,,,,,,Fan {{componentName}} status in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.178,FluidFS-MIB::fluidFSEventHardwarePowerSupplyInfoNotAvailable,,,,,,Power supply status in NAS Controller{{nodeId}} is not available. Internal error in power supply monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.179,FluidFS-MIB::fluidFSEventHardwarePowerSupplyInfoIsAvailable,,,,,,Power supply status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.180,FluidFS-MIB::fluidFSEventHardwarePsuError,,,,,,Power supply unit {{componentName}} in NAS Controller{{nodeId}} has failure status, power supply redundancy lost (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.181,FluidFS-MIB::fluidFSEventHardwarePsuWarning,,,,,,Power supply unit {{componentName}} in NAS Controller{{nodeId}} has warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.182,FluidFS-MIB::fluidFSEventHardwarePsuBackToNormal,,,,,,Power supply unit {{componentName}} in NAS Controller{{nodeId}} returned to normal operation (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.183,FluidFS-MIB::fluidFSEventHardwarePsuInfoNotAvailable,,,,,,Power supply unit {{componentName}} status in NAS Controller{{nodeId}} is not available. Internal error in power supply monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.184,FluidFS-MIB::fluidFSEventHardwarePsuInfoIsAvailable,,,,,,Power supply unit {{componentName}} status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.188,FluidFS-MIB::fluidFSEventHardwareAppPowerSupplyInfoNotAvailable,,,,,,Power supply status in NAS Appliance {{applianceId}} is not available. Internal error in power supply monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.189,FluidFS-MIB::fluidFSEventHardwareAppPowerSupplyInfoIsAvailable,,,,,,Power supply status in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.190,FluidFS-MIB::fluidFSEventHardwareAppPsuError,,,,,,Power supply unit {{componentName}} in NAS Appliance {{applianceId}} has failure status, power supply redundancy lost (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.191,FluidFS-MIB::fluidFSEventHardwareAppPsuWarning,,,,,,Power supply unit {{componentName}} in NAS Appliance {{applianceId}} has warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.192,FluidFS-MIB::fluidFSEventHardwareAppPsuBackToNormal,,,,,,Power supply unit {{componentName}} in NAS Appliance {{applianceId}} returned to normal operation (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.193,FluidFS-MIB::fluidFSEventHardwareAppPsuInfoNotAvailable,,,,,,Power supply unit {{componentName}} status in NAS Appliance {{applianceId}} is not available. Internal error in power supply monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.194,FluidFS-MIB::fluidFSEventHardwareAppPsuInfoIsAvailable,,,,,,Power supply unit {{componentName}} status in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.195,FluidFS-MIB::fluidFSEventHardwareAppPsuAmperageError,,,,,,Current sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports critical status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.196,FluidFS-MIB::fluidFSEventHardwareAppPsuAmperageWarning,,,,,,Current sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.197,FluidFS-MIB::fluidFSEventHardwareAppPsuAmperageNormal,,,,,,Current sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports normal status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.201,FluidFS-MIB::fluidFSEventHardwareAppPsuTempError,,,,,,Temperature sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.202,FluidFS-MIB::fluidFSEventHardwareAppPsuTempWarning,,,,,,Temperature sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.203,FluidFS-MIB::fluidFSEventHardwareAppPsuTempNormal,,,,,,Temperature sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.207,FluidFS-MIB::fluidFSEventHardwareAppPsuVoltageError,,,,,,Voltage sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports critical status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.208,FluidFS-MIB::fluidFSEventHardwareAppPsuVoltageWarning,,,,,,Voltage sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.209,FluidFS-MIB::fluidFSEventHardwareAppPsuVoltageNormal,,,,,,Voltage sensor in power supply unit {{componentName}} in NAS Appliance {{applianceId}} reports normal status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.213,FluidFS-MIB::fluidFSEventHardwareMotherBoardAmperageError,,,,,,NAS Controller{{nodeId}} system board current sensors report critical status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.214,FluidFS-MIB::fluidFSEventHardwareMotherBoardAmperageWarning,,,,,,NAS Controller{{nodeId}} system board current sensors report warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.215,FluidFS-MIB::fluidFSEventHardwareMotherBoardAmperageNormal,,,,,,NAS Controller{{nodeId}} system board current sensors report normal status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.216,FluidFS-MIB::fluidFSEventHardwareMotherBoardTempError,,,,,,NAS Controller{{nodeId}} system board temperature sensors report critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.217,FluidFS-MIB::fluidFSEventHardwareMotherBoardTempWarning,,,,,,NAS Controller{{nodeId}} system board temperature sensors report warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.218,FluidFS-MIB::fluidFSEventHardwareMotherBoardTempNormal,,,,,,NAS Controller{{nodeId}} system board temperature sensors report normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.219,FluidFS-MIB::fluidFSEventHardwareMotherBoardVoltageError,,,,,,NAS Controller{{nodeId}} system board voltage sensors report critical status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.220,FluidFS-MIB::fluidFSEventHardwareMotherBoardVoltageWarning,,,,,,NAS Controller{{nodeId}} system board voltage sensors report warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.221,FluidFS-MIB::fluidFSEventHardwareMotherBoardVoltageNormal,,,,,,NAS Controller{{nodeId}} system board voltage sensors report normal status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.222,FluidFS-MIB::fluidFSEventHardwareMotherBoardInfoNotAvailable,,,,,,Controller system board status in NAS Controller{{nodeId}} is not available. Internal error in system board monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.223,FluidFS-MIB::fluidFSEventHardwareMotherBoardInfoIsAvailable,,,,,,Controller system board status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.224,FluidFS-MIB::fluidFSEventHardwareNetworksInfoNotAvailable,,,,,,Network status in NAS Controller{{nodeId}} is not available. Internal error in network monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.225,FluidFS-MIB::fluidFSEventHardwareNetworksInfoIsAvailable,,,,,,Network status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.229,FluidFS-MIB::fluidFSEventHardwareNetworkInfoNotAvailable,,,,,,{{networkName}} network status in NAS Controller{{nodeId}} is not available. Internal error in network monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.230,FluidFS-MIB::fluidFSEventHardwareNetworkInfoIsAvailable,,,,,,{{networkName}} network status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.240,FluidFS-MIB::fluidFSEventHardwareApplianceStatusNotAvailable,,,,,,NAS Appliance {{applianceId}} hardware status is not available. Internal error in appliance status analysis (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.241,FluidFS-MIB::fluidFSEventHardwareApplianceStatusAvailable,,,,,,NAS Appliance {{applianceId}} hardware status is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.245,FluidFS-MIB::fluidFSEventHardwareLocalIPMIBackToNormal,,,,,,NAS Controller{{nodeId}} IPMI is back to normal (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.246,FluidFS-MIB::fluidFSEventHardwarePeerIPMIBackToNormal,,,,,,NAS Controller{{nodeId}} peer IPMI is reachable again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.247,FluidFS-MIB::fluidFSEventHardwareLocalIPMIStatusNotAvailable,,,,,,NAS Controller{{nodeId}} local IPMI status is not available. Internal error in IPMI status monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.248,FluidFS-MIB::fluidFSEventHardwareLocalIPMIStatusAvailable,,,,,,NAS Controller{{nodeId}} local IPMI status is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.249,FluidFS-MIB::fluidFSEventHardwarePeerIPMIStatusNotAvailable,,,,,,NAS Controller{{nodeId}} peer IPMI status is not available. Internal error in IPMI status monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.250,FluidFS-MIB::fluidFSEventHardwarePeerIPMIStatusAvailable,,,,,,NAS Controller{{nodeId}} peer IPMI status is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.251,FluidFS-MIB::fluidFSEventHardwarePsuNotDetected,,,,,,Power supply unit {{componentName}} in NAS Controller{{nodeId}} is not detected, power supply redundancy lost. Please make sure the unit is attached properly (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.252,FluidFS-MIB::fluidFSEventHardwarePsuDetected,,,,,,Power supply unit {{componentName}} in NAS Controller{{nodeId}} is detected (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.253,FluidFS-MIB::fluidFSEventHardwareAppPsuNotDetected,,,,,,Power supply unit {{componentName}} in NAS Appliance {{applianceId}} is not detected, power supply redundancy lost. Please make sure the unit is attached properly (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.254,FluidFS-MIB::fluidFSEventHardwareAppPsuDetected,,,,,,Power supply unit {{componentName}} in NAS Appliance {{applianceId}} is detected (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.257,FluidFS-MIB::fluidFSEventHardwareBpsNotAccessible,,,,,,NAS Controller{{nodeId}} failed to reach its BPS (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.258,FluidFS-MIB::fluidFSEventHardwareNoLinkInReplicationRelatedEthOnController,,,,,,Eth{{ethName}} which belongs to NAS Controller{{nodeId}} is down, therefore replication related connectivity may be affected.
.1.3.6.1.4.1.674.11000.2000.200.20.2.259,FluidFS-MIB::fluidFSEventHardwarePsuNoInput,,,,,,Power supply unit {{componentName}} in NAS Controller{{nodeId}} has no input. Please make sure the unit cable is attached properly (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.260,FluidFS-MIB::fluidFSEventHardwarePsuInputDetected,,,,,,Power supply unit {{componentName}} in NAS Controller{{nodeId}} input detected (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.261,FluidFS-MIB::fluidFSEventHardwareAppPsuNoInput,,,,,,Power supply unit {{componentName}} in NAS Appliance {{applianceId}} has no input. Please make sure the unit cable is attached properly (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.262,FluidFS-MIB::fluidFSEventHardwareAppPsuInputDetected,,,,,,Power supply unit {{componentName}} in NAS Appliance {{applianceId}} input detected (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.264,FluidFS-MIB::fluidFSEventHardwarePeerIPMIReachability,,,,,,NAS Controller{{nodeId}} cannot reach peer IPMI (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.265,FluidFS-MIB::fluidFSEventHardwareLocalIPMIReachability,,,,,,NAS Controller{{nodeId}} IPMI is not working (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.267,FluidFS-MIB::fluidFSEventHardwareChassisIntrusionAlert,,,,,,Chassis cover for NAS Controller{{nodeId}} is open (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.268,FluidFS-MIB::fluidFSEventHardwareChassisIntrusionBackToNormal,,,,,,Chassis cover for NAS Controller{{nodeId}} was closed (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.269,FluidFS-MIB::fluidFSEventHardwareBpsCalibrationCycleNotAvailable,,,,,,Battery Calibration Cycle status in NAS Controller{{nodeId}} is not available. Internal error in Battery monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.270,FluidFS-MIB::fluidFSEventHardwareBpsCalibrationCycleIsAvailable,,,,,,Battery Calibration Cycle status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.271,FluidFS-MIB::fluidFSEventHardwareBpsCalibrationCycleInProgress,,,,,,Battery Calibration Cycle is in progress. Description: A Battery Calibration Cycle in NAS Controller{{nodeId}} is in progress. The Battery Pack will go through charge and discharge cycles, therefore battery error events during this process are normal. This process may take up to 7 days from first notification to complete. (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.272,FluidFS-MIB::fluidFSEventHardwareBpsForcedCalibrationCyclePending,,,,,,Forced BPS Calibration pending, performance impact expected. Description: Calibration Cycle will be forced in 30 days from first notification. Could not perform normal battery calibration cycle in NAS Controller{{nodeId}} since peer controller battery is not in an optimal condition. If peer battery is not repaired before the Calibration Cycle is forced, then during portions of the Calibration Cycle the file system will move to journaling mode, which may cause a performance impact (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.273,FluidFS-MIB::fluidFSEventHardwareBpsForcedCalibrationCycleNotNeeded,,,,,,The Forced Battery Calibration Cycle in NAS Controller{{nodeId}} is no longer required (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.274,FluidFS-MIB::fluidFSEventHardwareBpsCalibrationCycleIdle,,,,,,The Battery Calibration Cycle in NAS Controller{{nodeId}} is idle (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.275,FluidFS-MIB::fluidFSEventHardwareBpsCalibrationLowBattery,,,,,,BPS on NAS Controller{{nodeId}} is not operating properly. This is expected as the battery is under calibration cycle. Charge is {{bpsBatteryCharge}}% (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.276,FluidFS-MIB::fluidFSEventHardwareStandardFrameDisconnected,,,,,,{{ethName}} on NAS Controller{{firstNodeId}} cannot access {{targetEthName}} on NAS Controller{{secondNodeId}} (service tag: {{contextBasedServiceTag}}). Check that these interfaces are connected to the same switch, and are properly tagged.
.1.3.6.1.4.1.674.11000.2000.200.20.2.277,FluidFS-MIB::fluidFSEventHardwareStandardFrameConnected,,,,,,{{ethName}} on NAS Controller{{firstNodeId}} can access {{targetEthName}} on NAS Controller{{secondNodeId}} (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.278,FluidFS-MIB::fluidFSEventHardwareLargeFrameLDisconnected,,,,,,{{ethName}} on NAS Controller{{firstNodeId}} cannot access {{targetEthName}} on NAS Controller{{secondNodeId}} using large frames (service tag: {{contextBasedServiceTag}}). Check that jumbo-frames are enabled for these interfaces in the switch.
.1.3.6.1.4.1.674.11000.2000.200.20.2.279,FluidFS-MIB::fluidFSEventHardwareLargeFrameConnected,,,,,,{{ethName}} on NAS Controller {{firstNodeId}} can access {{targetEthName}} on NAS Controller {{secondNodeId}} using large frames (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.282,FluidFS-MIB::fluidFSEventHardwareBpsLowBattery,,,,,,BPS charge on NAS Controller{{nodeId}} is too low ({{bpsBatteryCharge}}%). BPS is not operating properly (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.283,FluidFS-MIB::fluidFSEventHardwareExtServerJumboFramePacketLoss,,,,,,NAS Controller{{nodeId}} had {{packetLoss}}% packet loss to {{extSrvType}} {{ip}}. Please make sure the {{extSrvType}} allows jumbo frames.
.1.3.6.1.4.1.674.11000.2000.200.20.2.284,FluidFS-MIB::fluidFSEventHardwareCantReachExtServeJumboFrame,,,,,,NAS Controller{{nodeId}} cannot reach {{extSrvType}} {{ip}}. Please make sure the {{extSrvType}} allows jumbo frames.
.1.3.6.1.4.1.674.11000.2000.200.20.2.285,FluidFS-MIB::fluidFSEventHardwareCantReachStaticRoute,,,,,,NAS Controller{{nodeId}} cannot reach the gateway {{ip}} to network {{destinationNetwork}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.286,FluidFS-MIB::fluidFSEventHardwareCanReachStaticRoute,,,,,,NAS Controller{{nodeId}} can reach the gateway {{ip}} to network {{destinationNetwork}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.287,FluidFS-MIB::fluidFSEventHardwareClusterCantSeeAllFormattedLuns,,,,,,FluidFS cannot access any formatted LUN. Please make sure the backend storage is on and appropriately connected to FluidFS.
.1.3.6.1.4.1.674.11000.2000.200.20.2.288,FluidFS-MIB::fluidFSEventHardwareClusterSeesAllFormattedLuns,,,,,,FluidFS connection to all the formatted LUNs is fully restored.
.1.3.6.1.4.1.674.11000.2000.200.20.2.289,FluidFS-MIB::fluidFSEventHardwareNodeCantSeeFormattedLunsMajor,,,,,,NAS Controller{{nodeId}} cannot reach all the formatted LUNs. The system may not be serving. Please make sure that this Controller is properly connected to a storage.
.1.3.6.1.4.1.674.11000.2000.200.20.2.290,FluidFS-MIB::fluidFSEventHardwareNodeCantSeeFormattedLunsWarning,,,,,,NAS Controller{{nodeId}} cannot reach all the formatted LUNs. The performance may be degraded. Please make sure that this Controller is properly connected to a storage.
.1.3.6.1.4.1.674.11000.2000.200.20.2.291,FluidFS-MIB::fluidFSEventHardwareNodeSeesFormattedLuns,,,,,,NAS Controller{{nodeId}} restored connection to all the formatted LUNs.
.1.3.6.1.4.1.674.11000.2000.200.20.2.292,FluidFS-MIB::fluidFSEventHardwareClusterCantSeeFormattedLun,,,,,,LUN {{lunId}} is not reachable from FluidFS. Please make sure the LUN exists and is properly mapped from the backend storage.
.1.3.6.1.4.1.674.11000.2000.200.20.2.293,FluidFS-MIB::fluidFSEventHardwareClusterSeesFormattedLun,,,,,,LUN {{lunId}} is now fully reachable from FluidFS.
.1.3.6.1.4.1.674.11000.2000.200.20.2.294,FluidFS-MIB::fluidFSEventHardwareNodeCantSeeLunMajor,,,,,,FluidFS Controller{{nodeId}} can not reach formatted LUN {{lunId}}. The system may not be serving. Please check that this LUN has appropriate permissions to be seen by this FluidFS Controller.
.1.3.6.1.4.1.674.11000.2000.200.20.2.295,FluidFS-MIB::fluidFSEventHardwareNodeCantSeeLunWarning,,,,,,FluidFS Controller{{nodeId}} can not reach formatted LUN {{lunId}}. The performance may be degraded. Please check that this LUN has appropriate permissions to be seen by this FluidFS Controller.
.1.3.6.1.4.1.674.11000.2000.200.20.2.296,FluidFS-MIB::fluidFSEventHardwareMeshDisconnected,,,,,,node{{fromNode}}.{{fromEth}} cannot reach node{{toNode}}.{{toEth}} in vlan {{vlanTag}} Description: {{fromEth}} on NAS Controller{{fromNode}} cannot access {{toEth}} on NAS Controller{{toNode}} with vlan tag {{vlanTag}}. Action Items: Check that these interfaces are connected to the same switch, and are properly tagged.
.1.3.6.1.4.1.674.11000.2000.200.20.2.297,FluidFS-MIB::fluidFSEventHardwareMeshConnected,,,,,,node{{fromNode}}.{{fromEth}} can reach node{{toNode}}.{{toEth}} in vlan {{vlanTag}} Description: {{fromEth}} on NAS Controller{{fromNode}} can access {{toEth}} on NAS Controller{{toNode}} with vlan tag {{vlanTag}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.298,FluidFS-MIB::fluidFSEventHardwareTapeDeviceNotAccessibleFromNode,,,,,,Tape device {{tapeName}} is not accessible from NAS Controller{{nodeId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.299,FluidFS-MIB::fluidFSEventHardwareTapeDeviceNotAccessibleFromAllNodes,,,,,,Tape device {{tapeName}} is not accessible from all NAS Controllers.
.1.3.6.1.4.1.674.11000.2000.200.20.2.300,FluidFS-MIB::fluidFSEventHardwareTapeDeviceAccessibleFromNode,,,,,,Tape device {{tapeName}} is accessible from NAS Controller{{nodeId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.2.301,FluidFS-MIB::fluidFSEventHardwareDifferentFcHbaSpeedOnController,,,,,,Fibre Channel port speeds in NAS Controller{{nodeId}} are not identical.
.1.3.6.1.4.1.674.11000.2000.200.20.2.302,FluidFS-MIB::fluidFSEventHardwareBpsAccessibilityNotAvailable,,,,,,BPS reachability in NAS Controller{{nodeId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.303,FluidFS-MIB::fluidFSEventHardwareBpsAccessibilityIsAvailable,,,,,,BPS reachability in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.304,FluidFS-MIB::fluidFSEventHardwareBpsInfoNotAvailable,,,,,,BPS status info in NAS Controller{{nodeId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.305,FluidFS-MIB::fluidFSEventHardwareBpsInfoIsAvailable,,,,,,BPS status info in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.306,FluidFS-MIB::fluidFSEventHardwareProcessorNotOptimal,,,,,,Processor {{cpuName}} status in NAS Controller{{nodeId}} is not optimal (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.307,FluidFS-MIB::fluidFSEventHardwareProcessorError,,,,,,Processor {{cpuName}} status in NAS Controller{{nodeId}} is critical (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.308,FluidFS-MIB::fluidFSEventHardwareProcessorBackToNormal,,,,,,Processor {{cpuName}} in NAS Controller{{nodeId}} returned to normal operation (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.309,FluidFS-MIB::fluidFSEventHardwareProcessorTempNotAvailable,,,,,,Processor {{cpuName}} temprature sensor info in NAS Controller{{nodeId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.310,FluidFS-MIB::fluidFSEventHardwareProcessorTempIsAvailable,,,,,,Processor {{cpuName}} temprature sensor info in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.311,FluidFS-MIB::fluidFSEventHardwareProcessorTempWarn,,,,,,Processor {{cpuName}} temperature sensor in NAS Controller{{nodeId}} reports warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.312,FluidFS-MIB::fluidFSEventHardwareProcessorTempNormal,,,,,,Processor {{cpuName}} temperature sensors in NAS Controller{{nodeId}} report normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.313,FluidFS-MIB::fluidFSEventHardwareProcessorTempCritical,,,,,,Processor {{cpuName}} temperature sensors in NAS Controller{{nodeId}} report critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.314,FluidFS-MIB::fluidFSEventHardwareProcessorVoltageNotAvailable,,,,,,Processor {{cpuName}} voltage sensor info in NAS Controller{{nodeId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.315,FluidFS-MIB::fluidFSEventHardwareProcessorVoltageIsAvailable,,,,,,Processor {{cpuName}} voltage sensor info in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.316,FluidFS-MIB::fluidFSEventHardwareProcessorVoltageWarn,,,,,,Processor {{cpuName}} voltage sensors in NAS Controller{{nodeId}} report warning status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.317,FluidFS-MIB::fluidFSEventHardwareProcessorVoltageNormal,,,,,,Processor {{cpuName}} voltage sensors in NAS Controller{{nodeId}} report normal status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.318,FluidFS-MIB::fluidFSEventHardwareProcessorVoltageCritical,,,,,,Processor {{cpuName}} voltage sensors in NAS Controller{{nodeId}} report critical status (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.319,FluidFS-MIB::fluidFSEventHardwareProcessorInfoNotAvailable,,,,,,Processor {{cpuName}} status in NAS Controller{{nodeId}} is not available. Internal error in processor monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.320,FluidFS-MIB::fluidFSEventHardwareProcessorInfoIsAvailable,,,,,,Processor {{cpuName}} status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.321,FluidFS-MIB::fluidFSEventHardwareProcessorDisabled,,,,,,Processor {{cpuName}} in NAS Controller{{nodeId}} is disabled (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.322,FluidFS-MIB::fluidFSEventHardwareProcessorEnabled,,,,,,Processor {{cpuName}} in NAS Controller{{nodeId}} is enabled again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.323,FluidFS-MIB::fluidFSEventHardwareMemoryTempNotAvailable,,,,,,Memory device temperature sensors info in NAS Controller{{nodeId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.324,FluidFS-MIB::fluidFSEventHardwareMemoryTempIsAvailable,,,,,,Memory device temperature sensors info in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.325,FluidFS-MIB::fluidFSEventHardwareBpsError,,,,,,BPS on Controller{{nodeId}} (service tag: {{contextBasedServiceTag}}) is not operating properly - battery reports failed state (charge: {{bpsBatteryCharge}}%). Description: BPS on NAS Controller{{nodeId}} (service tag: {{contextBasedServiceTag}}) is not operating properly - battery reports failed state (charge: {{bpsBatteryCharge}}%). This could be the result of a recent calibration process - if you receive this event again after a few days for this specific controller, please contact Support.
.1.3.6.1.4.1.674.11000.2000.200.20.2.326,FluidFS-MIB::fluidFSEventHardwareLocalDiskWearingOut,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) in NAS Controller{{nodeId}} is wearing out. Consider disk replacement. Overall reads/writes: {{diskOverallReads}} / {{diskOverallWrites}} MB. (service tag: {{contextBasedServiceTag}})
.1.3.6.1.4.1.674.11000.2000.200.20.2.327,FluidFS-MIB::fluidFSEventHardwareLocalDiskLotOfBadSectors,,,,,,Local disk {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) in NAS Controller{{nodeId}} has a lot of bad sectors. Consider disk replacement. Bad sectors count: {{badSectorsCount}} (service tag: {{contextBasedServiceTag}})
.1.3.6.1.4.1.674.11000.2000.200.20.2.328,FluidFS-MIB::fluidFSEventHardwareLocalDiskBadSectorsCount,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) in NAS Controller{{nodeId}} bad sectors count: {{badSectorsCount}} (service tag: {{contextBasedServiceTag}})
.1.3.6.1.4.1.674.11000.2000.200.20.2.329,FluidFS-MIB::fluidFSEventHardwareLocalDiskLotOfFailedWrites,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) in NAS Controller{{nodeId}} has a lot of failed writes. Consider disk replacement. Failed writes count: {{failedWritesCount}} (service tag: {{contextBasedServiceTag}})
.1.3.6.1.4.1.674.11000.2000.200.20.2.330,FluidFS-MIB::fluidFSEventHardwareLocalDiskFailedWritesCount,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) in NAS Controller{{nodeId}} failed writes count: {{failedWritesCount}} (service tag: {{contextBasedServiceTag}})
.1.3.6.1.4.1.674.11000.2000.200.20.2.331,FluidFS-MIB::fluidFSEventHardwareLocalDiskBad,,,,,,S.M.A.R.T. self test is failed for local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) in NAS Controller{{nodeId}}. Disk may need a replacement. (service tag: {{contextBasedServiceTag}})
.1.3.6.1.4.1.674.11000.2000.200.20.2.332,FluidFS-MIB::fluidFSEventHardwareLocalDiskBackToNormal,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) in NAS Controller{{nodeId}} returned to normal operation (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.333,FluidFS-MIB::fluidFSEventHardwareLocalDiskModelNotSupported,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) is not supported in NAS Controller{{nodeId}}. Disk monitoring may not work properly. Suppoerted modles are: {{supportedModels}}. (service tag: {{contextBasedServiceTag}})
.1.3.6.1.4.1.674.11000.2000.200.20.2.334,FluidFS-MIB::fluidFSEventHardwareLocalDiskInfoNotAvailable,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) status in NAS Controller{{nodeId}} is not available. Internal error in local storage monitoring (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.335,FluidFS-MIB::fluidFSEventHardwareLocalDiskInfoIsAvailable,,,,,,Local storage disk drive {{diskName}} (Model: {{diskModel}}; Serial: {{diskSerial}}) status in NAS Controller{{nodeId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.336,FluidFS-MIB::fluidFSEventHardwareApplianceIntrusionNotAvailable,,,,,,Intrusion info for NAS Appliance{{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.337,FluidFS-MIB::fluidFSEventHardwareApplianceIntrusionIsAvailable,,,,,,Intrusion info for NAS Appliance{{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.338,FluidFS-MIB::fluidFSEventHardwareAppPsuAmperageNotAvailable,,,,,,Current sensor info in power supply unit {{componentName}} in NAS Appliance {{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.339,FluidFS-MIB::fluidFSEventHardwareAppPsuAmperageIsAvailable,,,,,,Current sensor info in power supply unit {{componentName}} in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.340,FluidFS-MIB::fluidFSEventHardwareAppPsuTempNotAvailable,,,,,,Temperature sensor info in power supply unit {{componentName}} in NAS Appliance {{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.341,FluidFS-MIB::fluidFSEventHardwareAppPsuTempIsAvailable,,,,,,Temperature sensor info in power supply unit {{componentName}} in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.342,FluidFS-MIB::fluidFSEventHardwareAppPsuVoltageNotAvailable,,,,,,Voltage sensor info in power supply unit {{componentName}} in NAS Appliance {{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.343,FluidFS-MIB::fluidFSEventHardwareAppPsuVoltageIsAvailable,,,,,,Voltage sensor info in power supply unit {{componentName}} in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.344,FluidFS-MIB::fluidFSEventHardwareAppTopControllerTempNotAvailable,,,,,,Temperature sensor info in top controller in NAS Appliance {{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.345,FluidFS-MIB::fluidFSEventHardwareAppTopControllerTempIsAvailable,,,,,,Temperature sensor info in top controller in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.346,FluidFS-MIB::fluidFSEventHardwareAppTopControllerTempNormal,,,,,,Temperature sensor in top controller in NAS Appliance {{applianceId}} reports normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.347,FluidFS-MIB::fluidFSEventHardwareAppTopControllerTempWarning,,,,,,Temperature sensor in top controller in NAS Appliance {{applianceId}} reports warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.348,FluidFS-MIB::fluidFSEventHardwareAppTopControllerTempError,,,,,,Temperature sensor in top controller in NAS Appliance {{applianceId}} reports critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.349,FluidFS-MIB::fluidFSEventHardwareAppBottomControllerTempNotAvailable,,,,,,Temperature sensor info in bottom controller in NAS Appliance {{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.350,FluidFS-MIB::fluidFSEventHardwareAppBottomControllerTempIsAvailable,,,,,,Temperature sensor info in bottom controller in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.351,FluidFS-MIB::fluidFSEventHardwareAppBottomControllerTempNormal,,,,,,Temperature sensor in bottom controller in NAS Appliance {{applianceId}} reports normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.352,FluidFS-MIB::fluidFSEventHardwareAppBottomControllerTempWarning,,,,,,Temperature sensor in bottom controller in NAS Appliance {{applianceId}} reports warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.353,FluidFS-MIB::fluidFSEventHardwareAppBottomControllerTempError,,,,,,Temperature sensor in bottom controller in NAS Appliance {{applianceId}} reports critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.354,FluidFS-MIB::fluidFSEventHardwareAppLeftRaiserCardTempNotAvailable,,,,,,Temperature sensor info in left raiser card in NAS Appliance {{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.355,FluidFS-MIB::fluidFSEventHardwareAppLeftRaiserCardTempIsAvailable,,,,,,Temperature sensor info in left raiser card in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.356,FluidFS-MIB::fluidFSEventHardwareAppLeftRaiserCardTempNormal,,,,,,Temperature sensor in left raiser card in NAS Appliance {{applianceId}} reports normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.357,FluidFS-MIB::fluidFSEventHardwareAppLeftRaiserCardTempWarning,,,,,,Temperature sensor in left raiser card in NAS Appliance {{applianceId}} reports warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.358,FluidFS-MIB::fluidFSEventHardwareAppLeftRaiserCardTempError,,,,,,Temperature sensor in left raiser card in NAS Appliance {{applianceId}} reports critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.359,FluidFS-MIB::fluidFSEventHardwareAppRightRaiserCardTempNotAvailable,,,,,,Temperature sensor info in right raiser card in NAS Appliance {{applianceId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.360,FluidFS-MIB::fluidFSEventHardwareAppRightRaiserCardTempIsAvailable,,,,,,Temperature sensor info in right raiser card in NAS Appliance {{applianceId}} is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.361,FluidFS-MIB::fluidFSEventHardwareAppRightRaiserCardTempNormal,,,,,,Temperature sensor in right raiser card in NAS Appliance {{applianceId}} reports normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.362,FluidFS-MIB::fluidFSEventHardwareAppRightRaiserCardTempWarning,,,,,,Temperature sensor in right raiser card in NAS Appliance {{applianceId}} reports warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.363,FluidFS-MIB::fluidFSEventHardwareAppRightRaiserCardTempError,,,,,,Temperature sensor in right raiser card in NAS Appliance {{applianceId}} reports critical status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.364,FluidFS-MIB::fluidFSEventHardwareMotherBoardAmperageNotAvailable,,,,,,NAS Controller{{nodeId}} system board current sensors info is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.365,FluidFS-MIB::fluidFSEventHardwareMotherBoardAmperageIsAvailable,,,,,,NAS Controller{{nodeId}} system board current sensors info is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.366,FluidFS-MIB::fluidFSEventHardwareMotherBoardTempNotAvailable,,,,,,NAS Controller{{nodeId}} system board temprature sensors info is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.367,FluidFS-MIB::fluidFSEventHardwareMotherBoardTempIsAvailable,,,,,,NAS Controller{{nodeId}} system board temprature sensors info is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.368,FluidFS-MIB::fluidFSEventHardwareMotherBoardVoltageNotAvailable,,,,,,NAS Controller{{nodeId}} system board voltage sensors info is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.369,FluidFS-MIB::fluidFSEventHardwareMotherBoardVoltageIsAvailable,,,,,,NAS Controller{{nodeId}} system board voltage sensors info is available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.370,FluidFS-MIB::fluidFSEventHardwareNetworkInterfaceDown,,,,,,{{networkName}} network interface {{ethName}} in NAS Controller{{nodeId}} is down.
.1.3.6.1.4.1.674.11000.2000.200.20.2.371,FluidFS-MIB::fluidFSEventHardwareNetworkInterfaceBackUp,,,,,,{{networkName}} network interface {{ethName}} in NAS Controller{{nodeId}} is back up.
.1.3.6.1.4.1.674.11000.2000.200.20.2.372,FluidFS-MIB::fluidFSEventHardwareNetworkInterfaceUnknown,,,,,,{{networkName}} network interface {{ethName}} in NAS Controller{{nodeId}} has unknown status.
.1.3.6.1.4.1.674.11000.2000.200.20.2.373,FluidFS-MIB::fluidFSEventHardwareFibreChannelPortDown,,,,,,Fibre Channel port {{ethName}} in NAS Controller{{nodeId}} is down.
.1.3.6.1.4.1.674.11000.2000.200.20.2.374,FluidFS-MIB::fluidFSEventHardwareFibreChannelPortUp,,,,,,Fibre Channel port {{ethName}} in NAS Controller{{nodeId}} is back up.
.1.3.6.1.4.1.674.11000.2000.200.20.2.375,FluidFS-MIB::fluidFSEventHardwareFibreChannelPortUnknown,,,,,,Fibre Channel port {{ethName}} in NAS Controller{{nodeId}} has unknown status.
.1.3.6.1.4.1.674.11000.2000.200.20.2.376,FluidFS-MIB::fluidFSEventHardwareSameFcHbaSpeedOnController,,,,,,Fibre Channel port speeds in NAS Controller{{nodeId}} are identical again.
.1.3.6.1.4.1.674.11000.2000.200.20.2.377,FluidFS-MIB::fluidFSEventHardwareSameEthSpeedOnNetworkNode,,,,,,Eth speeds on {{networkName}} network in NAS Controller{{nodeId}} are identical again.
.1.3.6.1.4.1.674.11000.2000.200.20.2.378,FluidFS-MIB::fluidFSEventHardwareAllIfsAreDown,,,,,,All {{subnetName}} network interfaces on NAS Controller{{nodeId}} are down.
.1.3.6.1.4.1.674.11000.2000.200.20.2.379,FluidFS-MIB::fluidFSEventHardwareEthSpeedOnSubnetNodeNotEqual,,,,,,Eth speeds on {{subnetName}} network in NAS Controller{{nodeId}} are not identical.
.1.3.6.1.4.1.674.11000.2000.200.20.2.380,FluidFS-MIB::fluidFSEventHardwareBpsTempNotAvailable,,,,,,BPS temperature sensor info in NAS Controller{{nodeId}} is not available (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.381,FluidFS-MIB::fluidFSEventHardwareBpsTempIsAvailable,,,,,,BPS temperature sensor info in NAS Controller{{nodeId}} is not available again (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.382,FluidFS-MIB::fluidFSEventHardwareBpsTempNormal,,,,,,Temperature sensor in BPS in NAS Controller{{nodeId}} reports normal status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.383,FluidFS-MIB::fluidFSEventHardwareBpsTempWarning,,,,,,Temperature sensor in BPS in NAS Controller{{nodeId}} reports warning status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.384,FluidFS-MIB::fluidFSEventHardwareBpsTempError,,,,,,Temperature sensor in BPS in NAS Controller{{nodeId}} reports error status (Ambient temperature: {{temperature}} degrees Celsius) (service tag: {{contextBasedServiceTag}}).
.1.3.6.1.4.1.674.11000.2000.200.20.2.385,FluidFS-MIB::fluidFSEventHardwarePSUfirmwareUpgradeFail,,,,,,Firmware upgarade for {{id}} failed
.1.3.6.1.4.1.674.11000.2000.200.20.2.386,FluidFS-MIB::fluidFSEventHardwarePSUfirmwareUpgradeSuccess,,,,,,Firmware upgrade for {{id}} finished successfuly
.1.3.6.1.4.1.674.11000.2000.200.20.2.387,FluidFS-MIB::fluidFSEventHardwareUnsupportedNic,,,,,,Unsupported card installed on Controller{{nodeId}}. Description: An unsupported PCI card was detected in slot {{pciSlot}} on NAS Controller{{nodeId}}: {{pciCard}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3,FluidFS-MIB::fluidFSEventsNdmp,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.3.6,FluidFS-MIB::fluidFSEventNdmpNdmpError,,,,,,{{Detail}}
.1.3.6.1.4.1.674.11000.2000.200.20.3.7,FluidFS-MIB::fluidFSEventNdmpNdmpWarn,,,,,,{{Detail}}
.1.3.6.1.4.1.674.11000.2000.200.20.3.8,FluidFS-MIB::fluidFSEventNdmpNdmpInfo,,,,,,{{Detail}}
.1.3.6.1.4.1.674.11000.2000.200.20.3.9,FluidFS-MIB::fluidFSEventNdmpAuthenticationFailure,,,,,,Failed to authenticate: {{Detail}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.10,FluidFS-MIB::fluidFSEventNdmpBackupStarted,,,,,,The backup session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} started. Description: The backup session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} started. The source path is {{Path}} and it is executed on controller {{ExecutedOnNode}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.11,FluidFS-MIB::fluidFSEventNdmpBackupFinished,,,,,,The backup session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} finished. Description: The backup session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} finished. The source path is {{Path}} and it is executed on controller {{ExecutedOnNode}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.12,FluidFS-MIB::fluidFSEventNdmpRestoreStarted,,,,,,The restore session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} started. Description: The restore session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} started. The target path is {{Path}} and it is executed on controller {{ExecutedOnNode}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.13,FluidFS-MIB::fluidFSEventNdmpRestoreFinished,,,,,,The restore session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} finished. Description: The restore session by ID {{SessionId}} initiated by DMA {{InitiatorDMAServer}} on {{StartTimestamp}} finished. The target path is {{Path}} and it is executed on controller {{ExecutedOnNode}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.14,FluidFS-MIB::fluidFSEventNdmpSessionFailed,,,,,,The session by ID {{SessionId}} failed: {{Detail}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.15,FluidFS-MIB::fluidFSEventNdmpSessionTerminated,,,,,,The session by ID {{SessionId}} was terminated: {{Detail}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.16,FluidFS-MIB::fluidFSEventNdmpConfigurationValidationError,,,,,,Failed to validate configuration: {{Detail}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.17,FluidFS-MIB::fluidFSEventNdmpIOError,,,,,,IO error: {{Detail}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.18,FluidFS-MIB::fluidFSEventNdmpNetworkError,,,,,,Network error: {{Detail}}.
.1.3.6.1.4.1.674.11000.2000.200.20.3.19,FluidFS-MIB::fluidFSEventNdmpSnapshotError,,,,,,Snapshot error: {{Detail}}.
.1.3.6.1.4.1.674.11000.2000.200.20.4,FluidFS-MIB::fluidFSEventsQuota,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.4.7,FluidFS-MIB::fluidFSEventQuotaSystemFreeSpaceThresholdExceeded,,,,,,Low system available space. Description: System available space is less than {{systemThreshold}}. Action Items: Add more storage to your system.
.1.3.6.1.4.1.674.11000.2000.200.20.4.8,FluidFS-MIB::fluidFSEventQuotaSystemUsedSpaceThresholdExceeded,,,,,,System usage is higher than {{systemThreshold}}%. Description: System usage is higher than threshold {{systemThreshold}}% of system capacity {{systemCapacity}}. Action Items: Add more storage to your system.
.1.3.6.1.4.1.674.11000.2000.200.20.4.10,FluidFS-MIB::fluidFSEventQuotaSystemLeakageBufferThresholdExceeded,,,,,,Internal storage reservation is running low. Description: Internal storage reservation is running low. The system capacity is {{systemCapacity}}. Please contact Support. 
.1.3.6.1.4.1.674.11000.2000.200.20.4.13,FluidFS-MIB::fluidFSEventQuotaSystemOutOfFreeSpace,,,,,,System is out of available space. Description: System is out of available space. Action Items: Add more storage to your system.
.1.3.6.1.4.1.674.11000.2000.200.20.4.14,FluidFS-MIB::fluidFSEventQuotaSystemUsedSpaceOverwhelmed,,,,,,System usage reached system capacity of {{systemCapacity}}. Description: System usage reached system capacity of {{systemCapacity}}. Action Items: Add more storage to your system.
.1.3.6.1.4.1.674.11000.2000.200.20.4.16,FluidFS-MIB::fluidFSEventQuotaSnapshotThresholdExceeded,,,,,,Snapshots space exceeded threshold for NAS volume {{virtualVolumeName}}. Description: NAS volume {{virtualVolumeName}} - Snapshots space exceeded the defined snapshots threshold {{snapshotsSpaceThreshold}}% of the total size {{volumeSize}}.
.1.3.6.1.4.1.674.11000.2000.200.20.4.17,FluidFS-MIB::fluidFSEventQuotaSnapshotAvailableSpaceBelowThreshold,,,,,,Low space is available for snapshots in NAS Volume {{virtualVolumeName}}. Description: NAS Volume {{virtualVolumeName}} - Space available for snapshots is less than {{snapshotsSpaceThreshold}}% of the total size {{volumeSize}}.
.1.3.6.1.4.1.674.11000.2000.200.20.4.18,FluidFS-MIB::fluidFSEventQuotaUserQuotaExceeded,,,,,,User soft quota exceeded. User {{userNameName}}, NAS volume {{virtualVolumeName}}. Description: User {{userNameName}} on NAS volume {{virtualVolumeName}} has exceeded its soft limit. Soft limit is {{quotaThreshold}} MB. Action Items: First determine whether this is the outcome of default quota or specific user quota defined for this NAS volume. If there is a fit between the current definition and the required quota enforcement, contact the user and warn him/her that future writes might be denied due to quota violation. If there is a special user requirement, and this is the outcome of a default quota definition, you might consider defining specific user quota for this user.
.1.3.6.1.4.1.674.11000.2000.200.20.4.19,FluidFS-MIB::fluidFSEventQuotaGroupQuotaExceeded,,,,,,Group soft quota exceeded. Group {{groupNameName}}, NAS volume {{virtualVolumeName}}. Description: Group {{groupNameName}} on NAS volume {{virtualVolumeName}} has exceeded its soft limit. Soft limit is {{quotaThreshold}} MB. Action Items: First determine whether this is the outcome of default quota or specific group quota defined for this NAS volume. If there is a fit between the current definition and the required quota enforcement, contact the group manager and warn him/her that future writes might be denied due to quota violation. If there is a special group requirement, and this is the outcome of a default quota definition, you might consider defining specific group quota for this group.
.1.3.6.1.4.1.674.11000.2000.200.20.4.20,FluidFS-MIB::fluidFSEventQuotaVolumeFreeSpaceThresholdExceeded,,,,,,Available space on NAS volume {{virtualVolumeName}} is running low. Description: NAS volume {{virtualVolumeName}} - Volume available space is less than {{volumeSpaceThreshold}}. Please note that writes to the NAS volume's clones will fail if its base Volume reaches full capacity. Action Items: See if the space shortage is caused by system space shortage or the volume is almost full. If the volume is thick or the shortage is at the volume level, you should consider removing old snapshots, cleanup the volume or increase the volume size. If the volume is thin and it is far from being full, consider removing snapshots and files in other thin volumes that are using unreserved space, purchase more storage and expand LUNs.
.1.3.6.1.4.1.674.11000.2000.200.20.4.21,FluidFS-MIB::fluidFSEventQuotaVolumeUsedSpaceThresholdExceeded,,,,,,NAS volume {{virtualVolumeName}} exceeded used space threshold. Description: NAS volume {{virtualVolumeName}} - Used space exceeded {{volumeSpaceThreshold}}% of the total size {{volumeSize}}. Please note that writes to the NAS volume's clones will fail if its base volume reaches full capacity.
.1.3.6.1.4.1.674.11000.2000.200.20.4.22,FluidFS-MIB::fluidFSEventQuotaVolumeOutOfFreeSpace,,,,,,NAS volume {{virtualVolumeName}} is out of available space. Description: NAS volume {{virtualVolumeName}} - Volume is out of available space. Please note that writes to the NAS volume and its clones will fail. Action Items: See if the space shortage is caused by system space shortage or the volume is full. If the volume is thick or the shortage is at the volume level, you should consider removing old snapshots, cleanup the volume or increase the volume size. If the volume is thin and it is far from being full, consider removing snapshots and files in other thin volumes that are using unreserved space, purchase more storage and expand LUNs.
.1.3.6.1.4.1.674.11000.2000.200.20.4.23,FluidFS-MIB::fluidFSEventQuotaVolumeUsedSpaceOverwhelmed,,,,,,NAS volume {{virtualVolumeName}} used space reached the volume size (no space). Description: NAS volume {{virtualVolumeName}} - Used space reached the volume size {{volumeSize}}. Please note that writes to the NAS volume and its clones will fail. Action Items: See if the space shortage is caused by system space shortage or the volume is full. If the volume is thick or the shortage is at the volume level, you should consider removing old snapshots, cleanup the volume or increase the volume size. If the volume is thin and it is far from being full, consider removing snapshots and files in other thin volumes that are using unreserved space, purchase more storage and expand LUNs.
.1.3.6.1.4.1.674.11000.2000.200.20.4.24,FluidFS-MIB::fluidFSEventQuotaDirectoryQuotaExceeded,,,,,,Directory Quota '{{quotaDirPath}}' in volume {{virtualVolumeName}} exceeded the soft limit Description: Directory Quota '{{quotaDirPath}}' in volume {{virtualVolumeName}} exceeded the soft limit of {{quotaThreshold}} MB. Action Items: Advise the users to clear some space from the directory or consider extending the quota limit.
.1.3.6.1.4.1.674.11000.2000.200.20.5,FluidFS-MIB::fluidFSEventsReplication,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.5.14,FluidFS-MIB::fluidFSEventReplicationDisconnection,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The connection between source and destination systems was lost. The replication will continue automatically when the connection is restored.
.1.3.6.1.4.1.674.11000.2000.200.20.5.15,FluidFS-MIB::fluidFSEventReplicationInternalError,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: There was an internal error (err: {{errorCode}}), please contact Support.
.1.3.6.1.4.1.674.11000.2000.200.20.5.16,FluidFS-MIB::fluidFSEventReplicationSourceFSIsDown,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The file system of source NAS volume is down. The replication will continue automatically when the file-system is started.
.1.3.6.1.4.1.674.11000.2000.200.20.5.17,FluidFS-MIB::fluidFSEventReplicationSourceFSIsNotOptimal,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The file-system of the source NAS volume is not optimal. The replication will continue automatically when the file-system recovers.
.1.3.6.1.4.1.674.11000.2000.200.20.5.18,FluidFS-MIB::fluidFSEventReplicationDestinationFSIsNotOptimal,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The file-system of the destination NAS volume is not optimal. The replication will continue automatically when the file-system recovers.
.1.3.6.1.4.1.674.11000.2000.200.20.5.19,FluidFS-MIB::fluidFSEventReplicationDestinationFSIsDown,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The file system of destination NAS volume is down. The replication will continue automatically when the file-system is started.
.1.3.6.1.4.1.674.11000.2000.200.20.5.20,FluidFS-MIB::fluidFSEventReplicationConfigurationError,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The source and destination systems resources are not balanced. Please consider to add new applience to the destination system.
.1.3.6.1.4.1.674.11000.2000.200.20.5.26,FluidFS-MIB::fluidFSEventReplicationMngConVipChanged,,,,,,Cluster VIP {{oldMngConVip}} was changed to {{newMngConVip}}. Please update partnership systems with this change.
.1.3.6.1.4.1.674.11000.2000.200.20.5.49,FluidFS-MIB::fluidFSEventReplicationMngConVipChangedDestination,,,,,,Manage console VIP {{oldMngConVip}} was changed to {{newMngConVip}}. Please, update partnership systems with this change.
.1.3.6.1.4.1.674.11000.2000.200.20.5.55,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeIsDetached,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The destination NAS volume disconnected from the source NAS volume. Please perform the disconnect action also from the source NAS volume, and if you would like, reconnect the NAS volumes again to allow replication.
.1.3.6.1.4.1.674.11000.2000.200.20.5.56,FluidFS-MIB::fluidFSEventReplicationDestinationClusterIsBusy,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: Temporarily the destination cluster is not available to serve the required replication.
.1.3.6.1.4.1.674.11000.2000.200.20.5.57,FluidFS-MIB::fluidFSEventReplicationIncompatibleVersions,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The system version of source NAS volume is higher than the system version of the destination system. Please upgrade the destination system to same version as source system.
.1.3.6.1.4.1.674.11000.2000.200.20.5.58,FluidFS-MIB::fluidFSEventReplicationNotEnoughSpaceInDestination,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: There is not enough space in the destination NAS volume. Please increase the destination NAS volume size.
.1.3.6.1.4.1.674.11000.2000.200.20.5.59,FluidFS-MIB::fluidFSEventReplicationSourceVolumeBusyWithReclaiming,,,,,,Replication between {{sourceVolumeName}}@{{sourceCluster}} and {{destinationVolume}}@{{destinationCluster}} experienced a temporary failure. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} experienced a temporary failure because of the following reason: The source NAS volume is busy freeing space. The replication will continue automatically when space is available.
.1.3.6.1.4.1.674.11000.2000.200.20.5.60,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeBusyWithReclaiming,,,,,,Replication between {{sourceVolumeName}}@{{sourceCluster}} and {{destinationVolume}}@{{destinationCluster}} experienced a temporary failure. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} experienced a temporary failure because of the following reason: The destination NAS volume is busy freeing space. The replication will continue automatically when space is available.
.1.3.6.1.4.1.674.11000.2000.200.20.5.61,FluidFS-MIB::fluidFSEventReplicationSourceFSIsBusy,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The file-system of the source NAS volume is busy with replication of other NAS volumes. The replication will continue automatically when the file-system releases part of the resources.
.1.3.6.1.4.1.674.11000.2000.200.20.5.62,FluidFS-MIB::fluidFSEventReplicationDestinationFSIsBusy,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The file-system of the destination NAS volume is busy with replication of other NAS volumes. The replication will continue automatically when the file-system releases part of the resources.
.1.3.6.1.4.1.674.11000.2000.200.20.5.63,FluidFS-MIB::fluidFSEventReplicationJumboFramesBlocked,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: Jumbo frames are blocked over the network.
.1.3.6.1.4.1.674.11000.2000.200.20.5.64,FluidFS-MIB::fluidFSEventReplicationRecoveredReplication,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} finished. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} successfully recovered from the problem and finished.
.1.3.6.1.4.1.674.11000.2000.200.20.5.65,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeShrink,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} succeeded. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} succeeded but resizing of the destination volume failed.
.1.3.6.1.4.1.674.11000.2000.200.20.5.66,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeIsDisabled,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The replication policy status on the destination volume is currently promoted. Please perform the promote action also from the source NAS volume, and demote to allow replication.
.1.3.6.1.4.1.674.11000.2000.200.20.5.67,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeDedupParams,,,,,,Optimization policy configuration is not updated. Description: As part of replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} the optimization policy configuration has failed to update.
.1.3.6.1.4.1.674.11000.2000.200.20.5.68,FluidFS-MIB::fluidFSEventReplicationRollbackSnapCloneBase,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: rollback snapshot failed due to clone snapshot base.
.1.3.6.1.4.1.674.11000.2000.200.20.5.69,FluidFS-MIB::fluidFSEventReplicationReplicationFinished,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} finished. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} which start at {{startTime}} has transferred {{totalTransferredSize}} MB of data and finished successfully at {{endTime}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.5.70,FluidFS-MIB::fluidFSEventReplicationDisconnectionDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The connection between source and destination systems was lost. The replication will continue automatically when the connection is restored.
.1.3.6.1.4.1.674.11000.2000.200.20.5.71,FluidFS-MIB::fluidFSEventReplicationInternalErrorDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: There was an internal error (err: {{errorCode}}), please contact the support team
.1.3.6.1.4.1.674.11000.2000.200.20.5.72,FluidFS-MIB::fluidFSEventReplicationSourceFSIsDownDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The file system of source NAS volume is down. The replication will continue automatically when the file-system is started.
.1.3.6.1.4.1.674.11000.2000.200.20.5.73,FluidFS-MIB::fluidFSEventReplicationSourceFSIsNotOptimalDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The file-system of the source NAS volume is not optimal. The replication will continue automatically when the file-system recovers.
.1.3.6.1.4.1.674.11000.2000.200.20.5.74,FluidFS-MIB::fluidFSEventReplicationDestinationFSIsNotOptimalDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The file-system of the destination NAS volume is not optimal. The replication will continue automatically when the file-system recovers.
.1.3.6.1.4.1.674.11000.2000.200.20.5.75,FluidFS-MIB::fluidFSEventReplicationDestinationFSIsDownDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The file system of destination NAS volume is down. The replication will continue automatically when the file-system is started.
.1.3.6.1.4.1.674.11000.2000.200.20.5.76,FluidFS-MIB::fluidFSEventReplicationConfigurationErrorDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The source and destination systems resources are not balanced. Please consider to add new applience to the destination system.
.1.3.6.1.4.1.674.11000.2000.200.20.5.77,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeIsDetachedDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The destination NAS volume disconnected from the source NAS volume, please perform the disconnect action also from the source NAS volume and if you would like reconnect the NAS volumes again.
.1.3.6.1.4.1.674.11000.2000.200.20.5.78,FluidFS-MIB::fluidFSEventReplicationDestinationClusterIsBusyDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: Temporarily the destination cluster is not available to serve the required replication.
.1.3.6.1.4.1.674.11000.2000.200.20.5.79,FluidFS-MIB::fluidFSEventReplicationIncompatibleVersionsDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The system version of source NAS volume is higher than the system version of the destination system. Please upgrade the destination system to same version as source system.
.1.3.6.1.4.1.674.11000.2000.200.20.5.80,FluidFS-MIB::fluidFSEventReplicationNotEnoughSpaceInDestinationDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: There is not enough space in the destination NAS volume, Please increase the destination NAS volume size.
.1.3.6.1.4.1.674.11000.2000.200.20.5.81,FluidFS-MIB::fluidFSEventReplicationSourceVolumeBusyWithReclaimingDestination,,,,,,Replication between {{sourceVolume}}@{{sourceCluster}} and {{destinationVolumeName}}@{{destinationCluster}} experienced a temporary failure Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} experienced a temporary failure because of the following reason: The source NAS volume is busy freeing space. The replication will continue automatically when space is available.
.1.3.6.1.4.1.674.11000.2000.200.20.5.82,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeBusyWithReclaimingDestination,,,,,,Replication between {{sourceVolume}}@{{sourceCluster}} and {{destinationVolumeName}}@{{destinationCluster}} experienced a temporary failure Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} experienced a temporary failure because of the following reason: The destination NAS volume is busy freeing space. The replication will continue automatically when space is available.
.1.3.6.1.4.1.674.11000.2000.200.20.5.83,FluidFS-MIB::fluidFSEventReplicationSourceFSIsBusyDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The file-system of the source NAS volume is busy with replication of other NAS volumes. The replication will continue automatically when the file-system releases part of the resources .
.1.3.6.1.4.1.674.11000.2000.200.20.5.84,FluidFS-MIB::fluidFSEventReplicationDestinationFSIsBusyDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The file-system of the destination NAS volume does not have enough resources to proceed with replication of other NAS volumes. The replication will continue automatically when the file-system releases part of the resources.
.1.3.6.1.4.1.674.11000.2000.200.20.5.85,FluidFS-MIB::fluidFSEventReplicationJumboFramesBlockedDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: Jumbo frames are blocked over the network.
.1.3.6.1.4.1.674.11000.2000.200.20.5.86,FluidFS-MIB::fluidFSEventReplicationRecoveredReplicationDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} finished. Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} successfully recovered from the problem and finished.
.1.3.6.1.4.1.674.11000.2000.200.20.5.87,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeShrinkDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} succeeded Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} succeeded but resizing of the desination volume failed.
.1.3.6.1.4.1.674.11000.2000.200.20.5.88,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeIsDisabledDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The replication policy status on the destination volume is currently promoted, please perform the promote action also from the source NAS volume, and demote allow replication.
.1.3.6.1.4.1.674.11000.2000.200.20.5.89,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeDedupParamsDestination,,,,,,Optimization policy configuration is not updated Description: As part of replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} the optimization policy configuration has failed to update.
.1.3.6.1.4.1.674.11000.2000.200.20.5.90,FluidFS-MIB::fluidFSEventReplicationRollbackSnapCloneBaseDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: rollback snapshot failed due to clone snapshot base.
.1.3.6.1.4.1.674.11000.2000.200.20.5.91,FluidFS-MIB::fluidFSEventReplicationReplicationFinishedDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} finished. Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} which start at {{startTime}} has transferred {{totalTransferredSize}} MB of data and finished successfully at {{endTime}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.5.92,FluidFS-MIB::fluidFSEventReplicationNotEnoughSpaceInDestinationRehydSrcVolSize,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: There is not enough space in the destination NAS volume. Please increase the destination NAS volume size to be at least {{rehydratedVolumeSize}} MBs.
.1.3.6.1.4.1.674.11000.2000.200.20.5.93,FluidFS-MIB::fluidFSEventReplicationReplicationFinishedInDomain,,,,,,Replication {{sourceVolumeName}}, {{destinationVolume}}@{{destinationCluster}} finished in domain {{domainId}} s-{{snapshotId}}. Description: Replication {{sourceVolumeName}}, {{destinationVolume}}@{{destinationCluster}} finished in domain {{domainId}} s-{{snapshotId}}. {{domainReplicationStats}} 
.1.3.6.1.4.1.674.11000.2000.200.20.5.94,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeIsReplicating,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} failed because of the following reason: The destination NAS volume is in the middle of replicating to another NAS volume. Please temporarily disable the outgoing replications from the destination NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.5.95,FluidFS-MIB::fluidFSEventReplicationDestinationVolumeIsReplicatingDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed. Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} failed because of the following reason: The destination NAS volume is in the middle of replicating to another NAS volume. Please temporarily disable the outgoing replications from the destination NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.5.96,FluidFS-MIB::fluidFSEventReplicationReplicationFinishedWithCompression,,,,,,Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} finished. Description: Replication between NAS volume {{sourceVolumeName}}@{{sourceCluster}} and NAS volume {{destinationVolume}}@{{destinationCluster}} which start at {{startTime}} has transferred {{totalTransferredSize}} MB of data with {{savingsPercent}}% savings due to data reduction and finished successfully at {{endTime}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.5.97,FluidFS-MIB::fluidFSEventReplicationReplicationFinishedWithCompressionDestination,,,,,,Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} finished. Description: Replication between NAS volume {{sourceVolume}}@{{sourceCluster}} and NAS volume {{destinationVolumeName}}@{{destinationCluster}} which start at {{startTime}} has transferred {{totalTransferredSize}} MB of data with {{savingsPercent}}% savings due to data reduction and finished successfully at {{endTime}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.7,FluidFS-MIB::fluidFSEventsSnapshot,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.7.1,FluidFS-MIB::fluidFSEventSnapshotFailedCreateSnapshot,,,,,,The snapshot scheduler failed to create {{snapshotName}} snapshot in volume {{volumeName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.7.2,FluidFS-MIB::fluidFSEventSnapshotFailedDeleteSnapshot,,,,,,The snapshot scheduler failed to delete snapshots in volume {{volumeName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.7.3,FluidFS-MIB::fluidFSEventSnapshotScheduleDeleteSnapshotBySpace,,,,,,The snapshot named {{snapshotName}} on {{volumeName}} NAS volume was scheduled for deletion by snapshots space auto-deletion mechanism.
.1.3.6.1.4.1.674.11000.2000.200.20.7.8,FluidFS-MIB::fluidFSEventSnapshotFailedToInitVMSnapshotsCreation,,,,,,Failed initializing the VM snapshot(s) creation Description: Failed to initiate VM snapshot(s) creation on VMWare server(s), thus {{snapshotName}} snapshot of {{FSIDName}} NAS volume will not be consistent from VMWare perspective Action Items: Please check network availability and current load on related VMWare server(s) Internal Information: One (or more) VMWare servers may be unavailable or responds with errors to FluidFS requests
.1.3.6.1.4.1.674.11000.2000.200.20.7.9,FluidFS-MIB::fluidFSEventSnapshotFailedToPerformVMSnapshotsCreation,,,,,,Failed to create VM snapshot(s) on VMWare server(s) Description: Failed to create VM snapshot(s), thus {{snapshotName}} snapshot of {{FSIDName}} NAS volume will not be consistent from VMWare perspective Action Items: Please check network availability and current load on related VMWare server(s) Internal Information: One (or more) VMWare servers may be unavailable or responds with errors to FluidFS requests
.1.3.6.1.4.1.674.11000.2000.200.20.7.10,FluidFS-MIB::fluidFSEventSnapshotFailedToPerformVMSnapshotsCleanup,,,,,,Failed removing the VM snapshot(s), created by FluidFS Description: Failed to perform a cleanup of VM snapshot(s), previously created by FluidFS on VMWare server(s) during {{snapshotName}} snapshot of {{FSIDName}} NAS volume creation Action Items: Please check network availability and current load on related VMWare server(s). Try to delete the redundant VM snapshot(s) manually in the vSphere user interface Internal Information: One (or more) VMWare servers may be unavailable or responds with errors to FluidFS requests
.1.3.6.1.4.1.674.11000.2000.200.20.7.11,FluidFS-MIB::fluidFSEventSnapshotSnapshotIsNotVMConsistent,,,,,,The {{snapshotName}} snapshot is not consistent from VMWare perspective Description: NAS volume {{FSIDName}} had been restored to the {{snapshotName}} snapshot recovery point, which is not consistent from VMWare perspective Action Items: In case {{FSIDName}} NAS volume indeed serves as VMWare Datastore, please try to restore the volume to a consistent snapshot recovery point
.1.3.6.1.4.1.674.11000.2000.200.20.7.12,FluidFS-MIB::fluidFSEventSnapshotSnapshotDeltaFailed,,,,,,Snapshot delta process on volume {{FSIDName}} failed Description: NAS volume {{FSIDName}} did not finish properly and therefore aborted Action Items: Please restart the process
.1.3.6.1.4.1.674.11000.2000.200.20.7.13,FluidFS-MIB::fluidFSEventSnapshotSnapshotDeltaSucceded,,,,,,Snapshot delta process on volume {{FSIDName}} succeded Description: NAS volume {{FSIDName}} has finished properly and file {{outputFileName}} was created in path {{outputPath}} on volume {{outputFSIDName}} Action Items: file {{outputFileName}} was created in path {{outputPath}} on volume {{outputFSIDName}} and is available now for reading
.1.3.6.1.4.1.674.11000.2000.200.20.7.14,FluidFS-MIB::fluidFSEventSnapshotSnapshotDeltaStarted,,,,,,Snapshot delta process on volume {{FSIDName}} started Description: NAS volume {{FSIDName}} has started with output file {{outputFileName}} in path {{outputPath}} on volume {{outputFSIDName}} Action Items: file {{outputFileName}} will be created in path {{outputPath}} on volume {{outputFSIDName}} 
.1.3.6.1.4.1.674.11000.2000.200.20.9,FluidFS-MIB::fluidFSEventsHealth,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.9.4,FluidFS-MIB::fluidFSEventHealthNodeFailed,,,,,,NAS controller {{nodeName}} is unavailable.
.1.3.6.1.4.1.674.11000.2000.200.20.9.5,FluidFS-MIB::fluidFSEventHealthNodeOK,,,,,,NAS controller {{nodeName}} is available.
.1.3.6.1.4.1.674.11000.2000.200.20.9.6,FluidFS-MIB::fluidFSEventHealthLocalPartitionIsFull,,,,,,The used space of local file system partition {{partitionName}} on NAS controller {{nodeName}} is high ({{percentOfUsedSpace}}%). Please contact support.
.1.3.6.1.4.1.674.11000.2000.200.20.9.7,FluidFS-MIB::fluidFSEventHealthHighUseOfSwap,,,,,,The usage of swap memory on NAS controller {{nodeName}} is high ({{percentOfUsedSwap}}%).
.1.3.6.1.4.1.674.11000.2000.200.20.9.8,FluidFS-MIB::fluidFSEventHealthHighUseOfMemory,,,,,,The memory usage on NAS controller {{nodeName}} is high.
.1.3.6.1.4.1.674.11000.2000.200.20.9.9,FluidFS-MIB::fluidFSEventHealthHighUseOfFileDescriptors,,,,,,File descriptors usage on NAS controller {{nodeName}} is high ({{percentOfUsedFileDescriptors}}%).
.1.3.6.1.4.1.674.11000.2000.200.20.9.10,FluidFS-MIB::fluidFSEventHealthPairPowerProblem,,,,,,The system switched Write-Through mode on (journaling). Description: NAS controller {{thisNodeId}} BPS is not functioning properly and its peer controller {{peerNodeId}} has health problems as well. Switched Write-Through mode on (journaling).
.1.3.6.1.4.1.674.11000.2000.200.20.9.11,FluidFS-MIB::fluidFSEventHealthPairPowerProblemRecovered,,,,,,The system switched Write-Through mode off (mirroring). Description: NAS controller {{thisNodeId}} verified the power system reliability and switched Write-Through mode off (mirroring).
.1.3.6.1.4.1.674.11000.2000.200.20.9.12,FluidFS-MIB::fluidFSEventHealthSafeShutdownBegins,,,,,,The power button of NAS controller {{thisNodeId}} was pressed. Description: The power button of NAS controller {{thisNodeId}} was pressed. The NAS controller's cache is being flushed and will orderly shut down in approximately 5 minutes. Please allow it to finish. Action Items: If this process takes longer than expected, don't try to workaround by manually shutting down the NAS controller. Please contact Support.
.1.3.6.1.4.1.674.11000.2000.200.20.9.13,FluidFS-MIB::fluidFSEventHealthSafeShutdownEnds,,,,,,NAS controller {{thisNodeId}} cache was flushed and it is shutting down.
.1.3.6.1.4.1.674.11000.2000.200.20.9.14,FluidFS-MIB::fluidFSEventHealthPairTemperatureProblem,,,,,,The system switched Write-Through mode on (journaling). Description: The system switched Write-Through mode on (journaling) because both NAS controllers' temperature appears high (or cannot be verified), on the controller pair with IDS {{thisNodeId}} and {{peerNodeId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.9.15,FluidFS-MIB::fluidFSEventHealthPairTemperatureProblemRecovered,,,,,,The system switched Write-Through mode off (mirroring). Description: NAS controller {{thisNodeId}} verified the temperature system reliability and switched Write-Through mode off (mirroring).
.1.3.6.1.4.1.674.11000.2000.200.20.9.16,FluidFS-MIB::fluidFSEventHealthClientsOnFailback,,,,,,There are clients ({{numberOfClients}}) that are waiting for manual failback.
.1.3.6.1.4.1.674.11000.2000.200.20.9.21,FluidFS-MIB::fluidFSEventHealthCacheLossOfUserFiles,,,,,,Latest user writes might have been lost. Description: The system identified that some of the latest user writes might have been lost. This might have been caused by a reboot of two NAS controllers in the same NAS appliance simultaneously. The system will start an automatic recovery procedure and in few minutes you should receive a completion event. During that time you will have partial or no service, SMB clients will be disconnected and NFS clients will be forced to remount. After the system is fully functional, please check your applications integrity and repeat the latest writes if needed. Action Items: In case repeating the latest writes is not possible or you still experience any difficulties, consider recovering the data from the latest snapshots or from backup. Internal Information: Domain {{domainId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.22,FluidFS-MIB::fluidFSEventHealthCacheLossOfMetadata,,,,,,File System process failed to recover. Description: The system identified that at least one of its File System processes has restarted and failed to recover it. The system will provide limited service. Please contact Support for further assistance. Action Items: Search product Knowledge Base for further information. Internal Information: Domain {{domainId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.23,FluidFS-MIB::fluidFSEventHealthCacheLossRecovered,,,,,,File system recovery successfully finished. Description: File system recovery successfully finished. Action Items: Data written in the day prior to the event might be compromised and should be verified.
.1.3.6.1.4.1.674.11000.2000.200.20.9.24,FluidFS-MIB::fluidFSEventHealthStoreAccessProblem,,,,,,Lost communication to storage from NAS controller {{nodeId}}. Description: The system identified a communication problem between NAS controller {{nodeId}} and the storage controllers which may affect system performance. Action Items: The system constantly monitors the validity of communication between NAS controllers and Storage controller. This event is issued once the system identifies a communication issue. If the system was recently deployed or any of its components were recently moved, verify that all connections and configurations are according to the recommendations. If the system was functioning optimally for a while and this is a new event it is most likely due to a physical problem (like a bad/loose cable) or a change in network configuration which affects the components communication. Verify that all the network cables are correctly connected to the relevant NAS controller. Verify that all the iSCSI switches are up and running. If any change was introduced to the environment (new physical switch, new switch configuration), try to revert this change in order to understand the cause of the problem. Verify that the iSCSI switch is configured according to the recommendation. If the problem is persistent after verifying all the above, it is recommended to power cycle the problematic NAS controller using the UI. Internal Information: Domain {{domainId}} setId {{setId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.25,FluidFS-MIB::fluidFSEventHealthLunVerificationFailure,,,,,,NAS controller {{nodeId}} encountered a problem accessing a NAS storage pool. Action Items: Please contact Support. Internal Information: Domain {{domainId}} LUN {{lunId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.27,FluidFS-MIB::fluidFSEventHealthFileSystemMajorAccessibilityProblem,,,,,,Clients may encounter a long period of partial data access. Description: The file system identified that clients may have partial data access in the last {{timeout}} minutes. Action Items: The NAS file system constantly verifies that it is accessible for read/write operations. This event is issued once it identifies that some operations took more time than expected or failed completely in the last {{timeout}} minutes. This could be caused by an intermittent issue of a HW failure like failed disk or disconnected network port. Verify that no RAID is being rebuilt and you do not have a recently failed drive. Verify that the cluster is connected according to the recommended cabling method and switch configuration.
.1.3.6.1.4.1.674.11000.2000.200.20.9.28,FluidFS-MIB::fluidFSEventHealthFileSystemAccessibilityRevival,,,,,,File system back to optimal state. Description: The File System has overcome its accessibility problem and returned back to full functionality.
.1.3.6.1.4.1.674.11000.2000.200.20.9.47,FluidFS-MIB::fluidFSEventHealthFSMultipleRmapChecksumError,,,,,,Multiple erroneous file system blocks were identified and fixed. Action Items: If the problem recurs, verify system hardware health.
.1.3.6.1.4.1.674.11000.2000.200.20.9.48,FluidFS-MIB::fluidFSEventHealthFSSystemUnrecoverableRmapChecksumError,,,,,,Unrecoverable erroneous block was identified. Description: Unrecoverable erroneous block was identified. The file system is partially serving. Action Items: Contact Support. Internal Information: File {{dsid}} mapping {{fileMapping}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.50,FluidFS-MIB::fluidFSEventHealthFSMultipleUserMetaDataMissing,,,,,,Multiple directory entries were identified as missing. Action Items: Recover them from backup.
.1.3.6.1.4.1.674.11000.2000.200.20.9.53,FluidFS-MIB::fluidFSEventHealthFSLowOnLunSpace,,,,,,High NAS pool capacity. Performance might be affected. Description: NAS pool capacity usage has reached high watermark which will affect performance. Action Items: Expand the NAS pool capacity, or free some space.
.1.3.6.1.4.1.674.11000.2000.200.20.9.65,FluidFS-MIB::fluidFSEventHealthBadClientLoadBalancing,,,,,,Bad {{protocol}} clients distribution: ({{connectionsVector}}). Description: Bad {{protocol}} clients distribution: ({{connectionsVector}}). Each pair in this set represents NAS controller ID and number of connections separated by a colon. Use the mass rebalance feature available via the clients connections screen.
.1.3.6.1.4.1.674.11000.2000.200.20.9.66,FluidFS-MIB::fluidFSEventHealthCifsLockingInconsistancy,,,,,,Inconsistent locks interrupted SMB service. Description: SMB service is interrupted due to inconsistencies in locking mechanism, starting recovery process. Internal Information: Domain {{domainId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.67,FluidFS-MIB::fluidFSEventHealthCifsLockingInconsistancyRecovered,,,,,,Inconsistent locks recovered. Description: SMB locking inconsistencies recovery was successfully finished.
.1.3.6.1.4.1.674.11000.2000.200.20.9.72,FluidFS-MIB::fluidFSEventHealthFSReclaimerOverload,,,,,,High load in snapshots space reclaiming process. Description: The file system has been recently engaged in reclaiming the space of deleted snapshots or NAS volumes. This could be the result of the deletion of a NAS volume and/or multiple snapshots. Action Items: If this event recurs on a daily basis, the file system performance can be improved; Reducing the frequency of snapshot scheduling will make more resources available for clients activity. Internal Information: Domain {{domainId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.75,FluidFS-MIB::fluidFSEventHealthPairStoreSetProblem,,,,,,System switched Write-Through mode on (journaling). Description: NAS controller {{thisNodeId}} has lost connection to storage subsystem and its peer NAS controller {{peerNodeId}} has health problems as well. Switched Write-Through mode on (journaling).
.1.3.6.1.4.1.674.11000.2000.200.20.9.76,FluidFS-MIB::fluidFSEventHealthPairStoreSetProblemRecovered,,,,,,System switched Write-Through mode off (mirroring). Description: NAS controller {{thisNodeId}} verified connection to storage subsystem and switched Write-Through mode off (mirroring).
.1.3.6.1.4.1.674.11000.2000.200.20.9.77,FluidFS-MIB::fluidFSEventHealthPairPowerSuppliesProblem,,,,,,The system switched Write-Through mode on (journaling). Description: NAS controller {{thisNodeId}} has lost full power supplies redundancy and its peer NAS controller {{peerNodeId}} has health problems as well. Switched Write-Through mode on (journaling).
.1.3.6.1.4.1.674.11000.2000.200.20.9.78,FluidFS-MIB::fluidFSEventHealthPairPowerSuppliesRecovered,,,,,,The system switched Write-Through mode off (mirroring). Description: NAS controller {{thisNodeId}} full power supplies redundancy was restored and switched Write-Through mode off (mirroring).
.1.3.6.1.4.1.674.11000.2000.200.20.9.85,FluidFS-MIB::fluidFSEventHealthPairFansProblem,,,,,,The system switched Write-Through mode on (journaling). Description: NAS controller {{thisNodeId}} fans are not working properly and its peer NAS controller {{peerNodeId}} has health problems as well. Switched Write-Through mode on (journaling).
.1.3.6.1.4.1.674.11000.2000.200.20.9.86,FluidFS-MIB::fluidFSEventHealthPairFansRecovered,,,,,,The system switched Write-Through mode off (mirroring). Description: NAS controller {{thisNodeId}} fans are working properly. Switched Write-Through mode off (mirroring).
.1.3.6.1.4.1.674.11000.2000.200.20.9.87,FluidFS-MIB::fluidFSEventHealthProtocolsStateInconsistancy,,,,,,Inconsistent state interrupted SMB/NFSv4 service. Description: SMB/NFSv4 services are interrupted due to inconsistencies in locking mechanism, starting recovery process. Internal Information: Domain {{domainId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.88,FluidFS-MIB::fluidFSEventHealthProtocolsStateInconsistancyRecovered,,,,,,Inconsistent locks recovered. Description: SMB/NFSv4 locking inconsistencies recovery was successfully finished.
.1.3.6.1.4.1.674.11000.2000.200.20.9.91,FluidFS-MIB::fluidFSEventHealthFSDedupSpaceMarginReached,,,,,,Optimization paused on volume {{virtualVolume}} - insufficient space. Description: Volume {{virtualVolume}} doesn't have the required free {{dedupSpaceMarginMb}} MB needed for optimization. Action Items: Make sure volume {{virtualVolume}} has at least {{dedupSpaceMarginMb}} MB free.
.1.3.6.1.4.1.674.11000.2000.200.20.9.92,FluidFS-MIB::fluidFSEventHealthStoreAccessRestored,,,,,,Restored communication to storage from NAS controller {{nodeId}}. Description: The system identified that a communication problem between NAS controller {{nodeId}} and the storage controllers was resolved. Internal Information: Domain {{domainId}} setId {{setId}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.102,FluidFS-MIB::fluidFSEventHealthDuplicateIp,,,,,,Duplicate IP address {{ipAddr}} in use on the node {{nodeId}}. Description: On node {{nodeId}} an ip address {{ipAddr}} in use on this system is being used by another system with mac address {{macAddr}}. Action Items: Either change the address {{ipAddr}} on node {{nodeId}}, or on the other device.
.1.3.6.1.4.1.674.11000.2000.200.20.9.103,FluidFS-MIB::fluidFSEventHealthUnmapIsNotSupportedOnLuns,,,,,,Unmap is not supported by some of the LUNs Description: The following LUNs doesn't support the unmap functionallity: {{LunsList}}. Action Items: Please consider to upgrade the listed LUNs to the newest version.
.1.3.6.1.4.1.674.11000.2000.200.20.9.110,FluidFS-MIB::fluidFSEventHealthPairHWProblem,,,,,,The system switched Write-Through mode on (journaling). Description: NAS controller {{thisNodeId}} hardware is not working properly and its peer NAS controller {{peerNodeId}} has health problems as well. Switched Write-Through mode on (journaling).
.1.3.6.1.4.1.674.11000.2000.200.20.9.111,FluidFS-MIB::fluidFSEventHealthPairHWRecovered,,,,,,The system switched Write-Through mode off (mirroring). Description: NAS controller {{thisNodeId}} hardware is working properly. Switched Write-Through mode off (mirroring).
.1.3.6.1.4.1.674.11000.2000.200.20.9.112,FluidFS-MIB::fluidFSEventHealthUnresponsiveVmwareServerOnAllNodes,,,,,,VMWare service is unavailable on all NAS-Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.113,FluidFS-MIB::fluidFSEventHealthUnresponsiveVmwareServerOnNodes,,,,,,VMWare service is unavailable on all NAS-Controllers {{nodeIds}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.114,FluidFS-MIB::fluidFSEventHealthResponsiveVmwareServerOnAllNodes,,,,,,VMWare service is available on all NAS-Controlles
.1.3.6.1.4.1.674.11000.2000.200.20.9.115,FluidFS-MIB::fluidFSEventHealthCouldNotAllocateProtectedMemory,,,,,,Problem with allocating protected memory Description: Memory detector could not allocate the protected memory Action Items: Please contact support
.1.3.6.1.4.1.674.11000.2000.200.20.9.116,FluidFS-MIB::fluidFSEventHealthInvalidSizeOfProtectedMemory,,,,,,Problem with allocating protected memory Description: The model's predefined size of protected memory is not equal to allocated Action Items: Please contact support
.1.3.6.1.4.1.674.11000.2000.200.20.9.117,FluidFS-MIB::fluidFSEventHealthCouldNotAllocateUnProtectedMemory,,,,,,Problem with allocating unprotected memory Description: Preallocation script could not allocate the unprotected memory Action Items: Please contact support
.1.3.6.1.4.1.674.11000.2000.200.20.9.118,FluidFS-MIB::fluidFSEventHealthUnresponsiveIscsiPortalsOnAllNodes,,,,,,iSCSI portals are unavailable on all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.119,FluidFS-MIB::fluidFSEventHealthUnresponsiveIscsiPortalsOnNodes,,,,,,iSCSI portals are unavailable on NAS Controllers {{nodeIds}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.120,FluidFS-MIB::fluidFSEventHealthResponsiveIscsiPortalsOnAllNodes,,,,,,iSCSI portals are available on all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.121,FluidFS-MIB::fluidFSEventHealthUnavailableNtpServiceOnAllNodes,,,,,,NTP service is unavailable on all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.122,FluidFS-MIB::fluidFSEventHealthAvailableNtpServiceOnAllNodes,,,,,,NTP service become available on all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.123,FluidFS-MIB::fluidFSEventHealthUnavailableNtpServiceOnNodes,,,,,,NTP service is unavailable on NAS Controllers {{nodeIds}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.124,FluidFS-MIB::fluidFSEventHealthUnavailableAntivirusOnAllNodes,,,,,,Antivirus is unavailable on all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.125,FluidFS-MIB::fluidFSEventHealthAvailableAntivirusOnAllNodes,,,,,,Antivirus become available on all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.126,FluidFS-MIB::fluidFSEventHealthUnavailableAntivirusOnNodes,,,,,,Antivirus is unavailable on NAS Controllers {{nodeIds}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.127,FluidFS-MIB::fluidFSEventHealthUnavailableAuditingServicesOnAllNodes,,,,,,Auditing subscribers became unavailable for all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.128,FluidFS-MIB::fluidFSEventHealthAvailableAuditingServicesOnAllNodes,,,,,,Auditing subscribers became available for all NAS Controllers
.1.3.6.1.4.1.674.11000.2000.200.20.9.129,FluidFS-MIB::fluidFSEventHealthUnavailableAuditingServicesOnNodes,,,,,,Auditing subscribers became unavailable for NAS Controller/s: {{nodeIds}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.130,FluidFS-MIB::fluidFSEventHealthPairCacheArmingProblem,,,,,,System switched Write-Through mode on (journaling). Description: NAS controller {{thisNodeId}} has problems with arming the protected memory, as well as it's peer. Switched Write-Through mode on (journaling).
.1.3.6.1.4.1.674.11000.2000.200.20.9.131,FluidFS-MIB::fluidFSEventHealthPairCacheArmingProblemRecovered,,,,,,System switched Write-Through mode off (mirroring). Description: NAS controller {{thisNodeId}} succeeded arming the protected memory, and switched Write-Through mode off (mirroring) .
.1.3.6.1.4.1.674.11000.2000.200.20.9.132,FluidFS-MIB::fluidFSEventHealthCouldNotArmProtectedMemoryRegion,,,,,,Problem with arming of protected memory regions Description: Memory detector could not arm protected memory region Action Items: Please contact support
.1.3.6.1.4.1.674.11000.2000.200.20.9.133,FluidFS-MIB::fluidFSEventHealthFSUserMetaDataMissing,,,,,,Directory entry was identified as missing; Entry {{dirEntry}} in {{parentDirDsidPath}}. Action Items: Recover it from backup. Internal Information: File {{dsid}} volume {{FSIDName}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.134,FluidFS-MIB::fluidFSEventHealthUnresponsiveLdapServersOnAllNodes,,,,,,LDAP servers, used by {{TenantName}}, are not responding. Description: All LDAP servers ({{serverNames}}), used by {{TenantName}}, are not responding on all NAS Controllers. For each server please check: its server logs for any event that caused it not to respond to requests; that it responds to ping requests from clients on the same subnetwork; that it responds to LDAP requests from clients on the same subnetwork.
.1.3.6.1.4.1.674.11000.2000.200.20.9.135,FluidFS-MIB::fluidFSEventHealthUnresponsiveLdapServersOnSomeNodes,,,,,,All LDAP servers ({{serverNames}}), used by {{TenantName}}, are unresponsive on some NAS Controllers: {{nodeIds}}.
.1.3.6.1.4.1.674.11000.2000.200.20.9.136,FluidFS-MIB::fluidFSEventHealthResponsiveLdapServerOnAllNodes,,,,,,Found responsive LDAP server(s) among ({{serverNames}}), used by {{TenantName}}, on all NAS Controllers.
.1.3.6.1.4.1.674.11000.2000.200.20.9.137,FluidFS-MIB::fluidFSEventHealthUnresponsiveNisServersOnAllNodes,,,,,,NIS servers, used by {{TenantName}}, are not responding. Description: All NIS servers ({{serverNames}}), used by {{TenantName}}, are not responding on all NAS Controllers. For each server please check: its server logs for any event that caused it not to respond to requests; that it responds to ping requests from clients on the same subnetwork; that it responds to NIS requests from clients on the same subnetwork.
.1.3.6.1.4.1.674.11000.2000.200.20.9.138,FluidFS-MIB::fluidFSEventHealthResponsiveNisServerOnAllNodes,,,,,,Found responsive NIS server(s) among ({{serverNames}}), used by {{TenantName}}, on all NAS Controllers.
.1.3.6.1.4.1.674.11000.2000.200.20.9.139,FluidFS-MIB::fluidFSEventHealthUnresponsiveNisServersOnSomeNodes,,,,,,All NIS servers ({{serverNames}}), used by {{TenantName}}, are unresponsive on some NAS Controllers: {{nodeIds}}.
.1.3.6.1.4.1.674.11000.2000.200.20.9.140,FluidFS-MIB::fluidFSEventHealthUnresponsiveDnsServersOnAllNodes,,,,,,DNS servers, used by {{TenantName}}, are not responding. Description: All DNS servers ({{serverIps}}), used by {{TenantName}}, are not responding on all NAS Controllers. For each server please check: its server logs for any event that caused it not to respond to requests; that it responds to ping requests from clients on the same subnetwork; that it responds to DNS requests from clients on the same subnetwork.
.1.3.6.1.4.1.674.11000.2000.200.20.9.141,FluidFS-MIB::fluidFSEventHealthResponsiveDnsServerOnAllNodes,,,,,,Found responsive DNS server(s) among ({{serverIps}}), used by {{TenantName}}, on all NAS Controllers.
.1.3.6.1.4.1.674.11000.2000.200.20.9.142,FluidFS-MIB::fluidFSEventHealthUnresponsiveDnsServersOnSomeNodes,,,,,,All DNS servers ({{serverIps}}), used by {{TenantName}}, are unresponsive on some NAS Controllers: {{nodeIds}}.
.1.3.6.1.4.1.674.11000.2000.200.20.9.143,FluidFS-MIB::fluidFSEventHealthUnresponsiveAdServer,,,,,,Active Directory, used by {{TenantName}}, is not responsive. Description: Active Directory domain {{domainName}}, used by {{TenantName}}, is not reachable. For each domain controller please check: its logs for any event that caused it not to respond to requests; that it responds to ping requests from clients on the same subnetwork; that it responds to AD requests from clients on the same subnetwork.
.1.3.6.1.4.1.674.11000.2000.200.20.9.144,FluidFS-MIB::fluidFSEventHealthResponsiveAdServer,,,,,,Active Directory domain {{domainName}}, used by {{TenantName}}, is reachable.
.1.3.6.1.4.1.674.11000.2000.200.20.9.145,FluidFS-MIB::fluidFSEventHealthSlowResponse,,,,,,Slow response time from {{serverKind}} to {{TenantName}}. Description: Response time from {{serverKind}} servers ({{serverList}}) of {{responseTime}} seconds exceeds {{criticalResponseTime}} seconds on {{TenantName}}. Action Items: Check availability of all {{serverKind}} servers. This error is usually the outcome of a communication error between the NAS and the external server. It could be caused by a network issue, external server overload or a software malfunction in one of environment components. Internal Information: {{internalInfo}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.146,FluidFS-MIB::fluidFSEventHealthAdCriticalClockSkew,,,,,,AD (used by {{TenantName}}) and NAS controller {{nodeId}} clocks aren't synchronized Description: Clock of NAS controller {{nodeId}} and AD clock, used by {{TenantName}} (domain {{DomainControllerName}}), are not synchronized (skew of {{adClockSkew}} seconds exceeds critical threshold of {{maxAdClockSkew}} seconds). Kerberos authentication may fail. Fix system clock/Fix AD clock. Enter the time configuration screen and get the configured NTP host. If no NTP is configured, it is recommended to configure one by either using the organization's NTP or the same IP/name used for joining the NAS to the AD.
.1.3.6.1.4.1.674.11000.2000.200.20.9.147,FluidFS-MIB::fluidFSEventHealthCIFSAttachedACLCorruption,,,,,,Failed to read a file ACL's. Description: ACL of file {{dsidPath}} can not be read. Access will be denied to all users. Action Items: Please reset the file ACL
.1.3.6.1.4.1.674.11000.2000.200.20.9.149,FluidFS-MIB::fluidFSEventHealthFSUserUnrecoverableRmapChecksumError,,,,,,Unrecoverable erroneous block in user file. Description: Unrecoverable erroneous block was identified in {{dsidPath}} and it is inaccessible. Action Items: Move this file/directory to a different name, and recover it from backup. Internal Information: Mapping {{fileMapping}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.150,FluidFS-MIB::fluidFSEventHealthFSVolumeUnrecoverableRmapChecksumError,,,,,,NAS Volume {{FSIDName}} is partially serving. Description: Unrecoverable erroneous block was identified in volume {{FSIDName}}. This volume is partially serving. Action Items: Run the file system diagnostics and contact Support. Internal Information: File {{dsid}} mapping {{fileMapping}}
.1.3.6.1.4.1.674.11000.2000.200.20.9.151,FluidFS-MIB::fluidFSEventHealthFSRehydrationSpaceMarginReached,,,,,,Rehydration paused on volume {{FSIDName}} - insufficient space. Description: Volume {{FSIDName}} doesn't have the required free {{dedupSpaceMarginMb}} MB needed for rehydration. Action Items: Make sure volume {{FSIDName}} has at least {{dedupSpaceMarginMb}} MB free.
.1.3.6.1.4.1.674.11000.2000.200.20.9.154,FluidFS-MIB::fluidFSEventHealthFSLowOnLunSpaceDedupPostponed,,,,,,High NAS pool space usage. Data Reduction paused on cluster. Description: Cluster does not have the required NAS pool free space needed for Data Reduction Action Items: Please perform one of the following actions to increase NAS pool free space : expand your NAS pool; Delete old Snapshots; Delete redundant NAS volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.9.155,FluidFS-MIB::fluidFSEventHealthFSLowOnLunSpaceDedupResumed,,,,,,Data Reduction resumed on cluster. Description: NAS pool free space increased. Data reduction is resumed
.1.3.6.1.4.1.674.11000.2000.200.20.9.156,FluidFS-MIB::fluidFSEventHealthFSLowOnLunSpaceFSNotAccessible,,,,,,High NAS pool space usage. File system access is limited Description: High NAS pool space usage. File system is accessible only using NFS3. Action Items: Please perform one of the following actions to increase NAS pool free space : expand your NAS pool; Delete old Snapshots; Delete redundant NAS volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.9.157,FluidFS-MIB::fluidFSEventHealthFSLowOnLunSpaceFSAccessible,,,,,,File system access is back to normal. Description: NAS pool free space increased. File system can be accessed by all protocols 
.1.3.6.1.4.1.674.11000.2000.200.20.9.158,FluidFS-MIB::fluidFSEventHealthLocalTimeDesynchronizedToNtp,,,,,,Local time on node {{nodeId}} is desynchronized by {{timeDiffSec}} seconds.
.1.3.6.1.4.1.674.11000.2000.200.20.10,FluidFS-MIB::fluidFSEventsAntivirus,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.10.16,FluidFS-MIB::fluidFSEventAntivirusAntivirusHostUp,,,,,,Antivirus host {{host}}:{{port}} accessibility is restored. Description: Antivirus host {{host}}:{{port}} accessibility is restored.
.1.3.6.1.4.1.674.11000.2000.200.20.10.17,FluidFS-MIB::fluidFSEventAntivirusAntivirusHostDown,,,,,,Antivirus host {{host}}:{{port}} is not accessible. Description: Antivirus host {{host}}:{{port}} is not accessible.
.1.3.6.1.4.1.674.11000.2000.200.20.10.18,FluidFS-MIB::fluidFSEventAntivirusAntivirusLicenseError,,,,,, Antivirus host {{host}}:{{port}} returns license error. Description: Antivirus host {{host}}:{{port}} returns license error.
.1.3.6.1.4.1.674.11000.2000.200.20.10.19,FluidFS-MIB::fluidFSEventAntivirusAntivirusAllDown,,,,,,No antivirus hosts are accessible. Description: No antivirus hosts are accessible. Virus scanning is not possible. SMB Shares with AV scan configured will not be accessible.
.1.3.6.1.4.1.674.11000.2000.200.20.10.27,FluidFS-MIB::fluidFSEventAntivirusAntivirusServersNotConfigured,,,,,,AntiVirus servers are not configured. Description: SMB share {{shareName}} is configured to use antivirus checking but no AV servers are configured yet. Access to the files inside the share is denied. Action Items: AntiVirus servers must be configured to provide AntiVirus facility
.1.3.6.1.4.1.674.11000.2000.200.20.10.31,FluidFS-MIB::fluidFSEventAntivirusAntivirusScanWasTooLong2,,,,,,Antivirus scan for file {{FSIDName}}/{{dsidPath}} took too long Description: Scanning for viruses for file {{dsidPath}} on NAS volume {{FSIDName}} accessed via SMB share {{shareName}} took too long: {{scanningDuration}} seconds (must be less than {{scanningDurationThreshold}}), scanning facility '{{scanningFacility}}'. Action Items: Please check network availability and current load on problematic AntiVirus facility.
.1.3.6.1.4.1.674.11000.2000.200.20.10.32,FluidFS-MIB::fluidFSEventAntivirusAccessDenied,,,,,,Virus was found in file {{FSIDName}}/{{dsidPath}} but quarantine is not applicable. Description: Virus ({{virusDescription}}) was found in file {{dsidPath}} on NAS volume {{FSIDName}} accessed via SMB share {{shareName}}. Quarantine action is not possible for this file, access to file is denied. Internal Information: Reason why quarantine action is not possible: {{accessDeniedReason}}
.1.3.6.1.4.1.674.11000.2000.200.20.10.33,FluidFS-MIB::fluidFSEventAntivirusAccessDeniedDueInternalError,,,,,,An error occurred while scanning the file {{FSIDName}}/{{dsidPath}} for viruses. Description: An error occurred during AV scan of the file {{dsidPath}} on NAS volume {{FSIDName}} accessed via SMB share {{shareName}}. Access to file is denied. Internal Information: Error details: {{accessDeniedReason}}
.1.3.6.1.4.1.674.11000.2000.200.20.10.34,FluidFS-MIB::fluidFSEventAntivirusUnexpectedAvResponse,,,,,,Error occurred while scanning for viruses. Description: AV server returned unexpected error during the scan for file {{dsidPath}} on NAS volume {{FSIDName}} accessed via SMB share {{shareName}}. Access is denied. Internal Information: ICAP protocol issue: unexpected ICAP status code {{icapStatus}} returned by facility {{server}}:{{port}}
.1.3.6.1.4.1.674.11000.2000.200.20.10.35,FluidFS-MIB::fluidFSEventAntivirusQuarantineActionFailed,,,,,,Virus was found in file {{FSIDName}}/{{dsidPath}} but quarantine action has failed. Description: Virus ({{virusDescription}}) was found in file {{dsidPath}} on NAS volume {{FSIDName}} accessed via SMB share {{shareName}}. Quarantine action failed for this file, access to file is denied. Internal Information: Quarantine action error details: {{accessDeniedReason}}
.1.3.6.1.4.1.674.11000.2000.200.20.10.36,FluidFS-MIB::fluidFSEventAntivirusInfectedFileQuarantined2,,,,,,Virus was found in file {{FSIDName}}/{{filePath}}, quarantine action is applied. Description: Virus ({{virusDescription}}) was found in file {{filePath}} on NAS volume {{FSIDName}} accessed via SMB share {{shareName}}. File is moved to quarantine (new path is {{dsidPath}}).
.1.3.6.1.4.1.674.11000.2000.200.20.10.37,FluidFS-MIB::fluidFSEventAntivirusInfectedFileRepaired,,,,,,Infected file {{FSIDName}}/{{dsidPath}} was repaired. Description: Virus ({{virusDescription}}) was found in file {{dsidPath}} on NAS volume {{FSIDName}} accessed via SMB share {{shareName}}. The file was repaired automatically.
.1.3.6.1.4.1.674.11000.2000.200.20.10.38,FluidFS-MIB::fluidFSEventAntivirusAccessDeniedLargeFileNotScanned,,,,,,Access denied: file {{FSIDName}}/{{dsidPath}} is too large for AV verification. Description: File {{dsidPath}} (which is {{fileSizeMb}} MB) on NAS volume {{FSIDName}} accessed via SMB share {{shareName}} cannot be scanned for viruses because it exceeds the maximum scan size ({{largeFileSizeLimitMb}} Mb). This share is configured to block access to un-scanned files. Action Items: Increase the maximum scan size for AV scanning or change the policy to allow un-scanned files for access. Please note, Anti-virus scan of large files may delay the initial open request.
.1.3.6.1.4.1.674.11000.2000.200.20.10.39,FluidFS-MIB::fluidFSEventAntivirusLargeFileNotScanned,,,,,,Access allowed: file {{FSIDName}}/{{dsidPath}} was opened without AV verification. Description: File {{dsidPath}} (which is {{fileSizeMb}} MB) on NAS volume {{FSIDName}} accessed via SMB share {{shareName}} was not scanned for viruses because it exceeds the maximum scan size ({{largeFileSizeLimitMb}} MB). Action Items: Increase the maximum file size for AV scan or change the policy to deny un-scanned files for access. Please note, Anti-virus scan of large files may delay the initial open request.
.1.3.6.1.4.1.674.11000.2000.200.20.11,FluidFS-MIB::fluidFSEventsClientAccess,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.11.6,FluidFS-MIB::fluidFSEventClientAccessMountFailureInternalError,,,,,,NFS mount failure. Internal mount error {{mountPath}}. Description: NFS mount failure: Internal mount error for the client {{clientIpAddr}} while mounting path {{mountPath}}. Internal Information: NFS error code: {{nfsErrorCode}} 
.1.3.6.1.4.1.674.11000.2000.200.20.11.51,FluidFS-MIB::fluidFSEventClientAccessResetAdminPasswordFromConsole,,,,,,Administrator password was reset from the console. Description: Administrator password was reset from the console.
.1.3.6.1.4.1.674.11000.2000.200.20.11.54,FluidFS-MIB::fluidFSEventClientAccessSMBMemThreshold1,,,,,,Due to SMB high resource usage disabling Large MTU. Description: Due to SMB high resource usage disabling Large MTU on NAS controller {{nasControllerId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.55,FluidFS-MIB::fluidFSEventClientAccessSMBMemThreshold2,,,,,,Due to SMB high resource usage new connections not allowed. Description: Due to SMB high resource usage new connections are not allowed on NAS controller {{nasControllerId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.58,FluidFS-MIB::fluidFSEventClientAccessLockDBOutOfResources,,,,,,File open or lock denied due to lack of internal resources. Description: NAS controller {{nodeId}} is low on resources and cannot serve SMB and NFSv4 file open and lock requests. Disconnect existing connections to free resources.
.1.3.6.1.4.1.674.11000.2000.200.20.11.59,FluidFS-MIB::fluidFSEventClientAccessSessionDBOutOfResources,,,,,,NFSv4 session was denied. Too many sessions currently in use Description: No resources available for new NFSv4 sessions as too many sessions are currently in use. NAS controller {{nodeId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.70,FluidFS-MIB::fluidFSEventClientAccessUsersProxyNoService,,,,,,NFS/SMB partial service Description: Access to {{serverKind}} directory service is limited or service is temporary unavailable Action Items: This scenario usually happens after directory changes (UNIX database re-configuration, Active Directory join, etc). The problem can occur due poor performance of newly configured directory; please wait some time until new directory will be fully initialized. In case of unexpected or persistent problem please check the operability of directory and network connectivity to directory service. Also problems with '{{service}}' internal service can cause this issue - please check for problematic services.
.1.3.6.1.4.1.674.11000.2000.200.20.11.71,FluidFS-MIB::fluidFSEventClientAccessSecChangeErrorBypassOn,,,,,,Security change errors bypassed Description: Errors due to chmod/chown/chgrp on volumes with windows security style now bypassed
.1.3.6.1.4.1.674.11000.2000.200.20.11.72,FluidFS-MIB::fluidFSEventClientAccessSecChangeErrorBypassOff,,,,,,Security change errors returned Description: Errors due to chmod/chown/chgrp on volumes with windows security style now returned
.1.3.6.1.4.1.674.11000.2000.200.20.11.80,FluidFS-MIB::fluidFSEventClientAccessFluidFsNotifyEventsDroppedDue2InternalIssues,,,,,,File Access Notifications were dropped. Description: {{droppedNotificationsCounter}} File Access Notifications were dropped due to internal issues
.1.3.6.1.4.1.674.11000.2000.200.20.11.81,FluidFS-MIB::fluidFSEventClientAccessFluidFsNotifyEventsDroppedDue2ServerIssues,,,,,,File Access Notifications were dropped. Description: {{droppedNotificationsCounter}} File Access Notifications were dropped due to auditing server issues
.1.3.6.1.4.1.674.11000.2000.200.20.11.82,FluidFS-MIB::fluidFSEventClientAccessFluidFsNotifyEncryptionFailure,,,,,,File Access Notification encryption failed Description: Failed initializing encrypted connection to the auditing server. encryption credentials configuration may be invalid
.1.3.6.1.4.1.674.11000.2000.200.20.11.89,FluidFS-MIB::fluidFSEventClientAccessMountFromInsecurePort,,,,,,NFS mount failure. Wrong port was used for secure export {{nfsExport}}. Description: NFS mount failure: Client {{clientIpAddr}} attempted to mount the secure export {{nfsExport}} on NAS Volume {{nasContainerIdIntegerName}} but used port {{nfsClientPort}} instead of a well-known port (under 1024) on the client side. Action Items: Secure exports require that the client accessing them will perform the mount using a well-known port (under 1024). This is done as a security measure.
.1.3.6.1.4.1.674.11000.2000.200.20.11.90,FluidFS-MIB::fluidFSEventClientAccessMountExportDoesntExist,,,,,,NFS mount failure. The path {{mountPath}} is not exported by {{TenantName}}. Description: NFS mount failure: Client {{clientIpAddr}} attempted to mount the path ({{mountPath}}) from {{TenantName}} which is not exported to NFS clients. Action Items: This failure is commonly caused by spelling mistakes done on the client machine or when accessing the wrong server. List all available exports on the NAS and verify everything is as expected, all the needed exports exist and nothing has been changed unintentionally.
.1.3.6.1.4.1.674.11000.2000.200.20.11.91,FluidFS-MIB::fluidFSEventClientAccessMountPathDoesntExist,,,,,,NFS mount failure. Non existent mount path {{mountPath}}. Description: NFS mount failure: Client {{clientIpAddr}} tried to mount nonexistent mount path {{mountPath}} on NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.92,FluidFS-MIB::fluidFSEventClientAccessMountFailurePermissionDenied,,,,,,NFS mount failure. Access denied during mount {{mountPath}}. Description: NFS mount failure: Access denied for the client {{clientIpAddr}} while mounting path {{mountPath}} on NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.93,FluidFS-MIB::fluidFSEventClientAccessMountFailedDueExportOptions,,,,,,NFS mount failure. Access attempt to limited export {{nfsExport}} Description: NFS mount failure: Client {{clientIpAddr}} is not allowed to access export {{nfsExport}} on NAS Volume {{nasContainerIdIntegerName}}, with defined export options: {{nfsExportOptions}}. Action Items: This error is caused by a client which accesses a limited export. The export was defined with clients limitations (network or netgroup or IP) that did not include the accessing client.
.1.3.6.1.4.1.674.11000.2000.200.20.11.94,FluidFS-MIB::fluidFSEventClientAccessMountFailedDueNetgroupFailure,,,,,,NFS mount failure. Netgroups could not be attained {{nfsExport}}. Description: NFS mount failure: Client {{clientIpAddr}} failed to mount export {{nfsExport}} on NAS Volume {{nasContainerIdIntegerName}} since the required netgroup information could not be attained. Export options: {{nfsExportOptions}}. Action Items: Check availability of NIS/LDAP server. This error is usually the outcome of a communication error between the NAS and the NIS/LDAP server. It could be caused by a network issue, directory server overload or a software malfunction in one of environment components.
.1.3.6.1.4.1.674.11000.2000.200.20.11.95,FluidFS-MIB::fluidFSEventClientAccessClientClockSkew,,,,,,Client authentication failed on {{TenantName}} due to client clock skew. Description: Kerberos authentication failed because of the client clock skew between client {{clientIpAddr}} and NAS controller {{nasControllerId}} of {{TenantName}}. Action Items: Fix client clock. Your client clock must be within 5 minutes range from the Kerberos server (i.e. AD) clock. Configure the used AD as an NTP server for this client to avoid clock skews errors.
.1.3.6.1.4.1.674.11000.2000.200.20.11.96,FluidFS-MIB::fluidFSEventClientAccessSharePathNotFound,,,,,,Client connect failure. Share {{cifsShare}} points to invalid directory. Description: SMB client connection failure: Client {{clientIpAddr}} accessed a nonexistent share {{cifsShare}} which refers to an inexistent directory {{nasContainerPath}} in NAS Volume {{nasContainerIdIntegerName}}. Action Items: List all available shares on the NAS and identify the problematic share. It should have an indication that it is not accessible.
.1.3.6.1.4.1.674.11000.2000.200.20.11.97,FluidFS-MIB::fluidFSEventClientAccessIncorrectUserPassword,,,,,,SMB client login to {{TenantName}} failed. Wrong password for user {{userName}}. Description: SMB client login failure: Client {{clientIpAddr}} with user name '{{userName}}' supplied the wrong password. NAS Controller {{nasControllerId}} of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.98,FluidFS-MIB::fluidFSEventClientAccessLoginFailure,,,,,,SMB client login to {{TenantName}} failed. Authorization failed for user {{userName}}. Description: Authorization for user '{{userName}}' failed, client {{clientIpAddr}}, NAS controller {{nasControllerId}} of {{TenantName}}. Internal Information: {{internalInfo}} 
.1.3.6.1.4.1.674.11000.2000.200.20.11.99,FluidFS-MIB::fluidFSEventClientAccessShareDoesntExist,,,,,,SMB client connection failure. Unavailable share {{cifsShare}} on {{TenantName}}. Description: SMB client connection failure: Client {{clientIpAddr}} attempted to connect to an unavailable share {{cifsShare}} of {{TenantName}}. Action Items: This failure is commonly caused by spelling mistakes done on the client machine or by a user trying to access the home share of a different user.
.1.3.6.1.4.1.674.11000.2000.200.20.11.100,FluidFS-MIB::fluidFSEventClientAccessNfsAccessDenied,,,,,,NFS user {{nfsUserName}} access to a file denied. Insufficient permissions. Description: NFS access denied: user {{nfsUserName}} does not have sufficient permissions for the file {{dsidPath}} on NAS Volume {{nasContainerIdIntegerName}}. Desired/granted access mask: {{desiredNfsAccessMaskHrf}} / {{grantedNfsAccessMaskHrf}}. Internal Information: {{internalInfo}} 
.1.3.6.1.4.1.674.11000.2000.200.20.11.101,FluidFS-MIB::fluidFSEventClientAccessNfsModificationOfRoExport,,,,,,NFS access denied. Attempt to modify a read-only export {{nfsExport}}. Description: NFS Access Denied: User {{nfsUserName}} accessing from {{clientIpAddr}} tried to perform modifications on a read-only export: {{nfsExport}}, NAS Volume {{nasContainerIdIntegerName}}. Action Items: Verify that the relevant export definition of read-only was done intentionally. Contact the user who is responsible for this access or for application access to understand the reason for using read-only export with write operations.
.1.3.6.1.4.1.674.11000.2000.200.20.11.102,FluidFS-MIB::fluidFSEventClientAccessNfsAccessFromInsecurePortToSecureExport,,,,,,NFS access denied. Secured port must be used; export {{nfsExport}}. Description: NFS Access Denied: User {{nfsUserName}} tried to access from {{clientIpAddr}} to a secure export {{nfsExport}}, NAS Volume {{nasContainerIdIntegerName}} using a non secure port {{nfsClientPort}}. Action Items: Secure exports require that the client accessing them will use a well-known port (under 1024). This is done as a security measure. Identify the relevant export and the checkbox that marks it as secure/requires secure port. If there is no need for a secure export (e.g. the network is not public) make the export insecure by unchecking the secure export option and try again. If the export must remain secure, please refer to the NFS client documentation in order to change the currently used NFS client port to a well-known port (under 1024).
.1.3.6.1.4.1.674.11000.2000.200.20.11.103,FluidFS-MIB::fluidFSEventClientAccessModificationOfRoVolume,,,,,,Access denied. Attempt to modify a read-only NAS volume {{nasContainerIdIntegerName}}. Description: Access denied: User {{nfsUserName}} accessing from client {{clientIpAddr}} tried to modify the file {{dsidPath}} with operation '{{nfsOp}}' on a read-only NAS volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.104,FluidFS-MIB::fluidFSEventClientAccessModifyAccessToSnapshot,,,,,,Access denied. Attempt to modify a snapshot; NAS volume {{nasContainerIdIntegerName}}. Description: Access denied: User {{nfsUserName}} accessing from client {{clientIpAddr}} tried to modify the file {{dsidPath}} on NAS volume {{nasContainerIdIntegerName}} that is located in a snapshot. Action Items: Snapshot is an exact representation of the NAS volume data at the time of the snapshot creation. For that reason, and by definition, snapshot data can't be modified. Contact the user and instruct him to limit any modifications to the current work area in the NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.11.105,FluidFS-MIB::fluidFSEventClientAccessNfsOpNotAllowedDueVolumeStyle,,,,,,NFS access denied. Operation not permitted on {{volumeStyle}} volume {{nasContainerIdIntegerName}}. Description: NFS access denied: User {{nfsUserName}} accessing from client {{clientIpAddr}} tried to '{{nfsOp}}' on a {{volumeStyle}} NAS volume {{nasContainerIdIntegerName}}, file {{dsidPath}}. [[nl]] Choosing a volume security style dictates which protocol will be used to set permissions on files in this volume. This also sets certain limitations on operations which are not allowed for this security style: [[nl]]1. Setting an ACL for a file in a NAS volume defined with UNIX Security style. [[nl]]2. Setting mode for a file in a NAS volume defined with NTFS Security style. [[nl]]3. Changing the read-only flag for a file in a NAS volume defined with UNIX Security style. [[nl]]4. Setting SID/GSID ownership on UNIX Security style [[nl]]5. Setting UID/GID ownership on NTFS Security style. [[nl]]A user might try to perform one of the above actions and get an 'Access denied' error without understanding why. Action Items: The NAS Volume security style should be chosen according to the main intended usage. If a user needs to perform a security related activity which is forbidden, consider splitting the data into two separate NAS Volumes based on the access pattern.
.1.3.6.1.4.1.674.11000.2000.200.20.11.106,FluidFS-MIB::fluidFSEventClientAccessNotAnOwner,,,,,,NFS access denied. User {{nfsUserName}} not owner of file. Description: NFS Access Denied: User {{nfsUserName}} accessing from client {{clientIpAddr}} can't perform owner restricted operation {{nfsOp}} on file {{dsidPath}}, NAS Volume {{nasContainerIdIntegerName}}, file owner {{userOwnerName}} : {{groupOwnerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.107,FluidFS-MIB::fluidFSEventClientAccessGiveUidOwnershipAwayDenied,,,,,,NFS access denied. Root privileges needed to give ownership. Description: NFS Access Denied: User {{nfsUserName}} accessing from client {{clientIpAddr}} can't give ownership away by operation {{nfsOp}} on file {{dsidPath}} to {{userOwnerName}} because root privileges are required for that, NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.108,FluidFS-MIB::fluidFSEventClientAccessGiveGidOwnershipAwayDenied,,,,,,NFS access denied. Root privileges needed to give ownership. Description: NFS Access Denied: User {{nfsUserName}} accessing from client {{clientIpAddr}} can't give ownership away by operation {{nfsOp}} on file {{dsidPath}} to {{groupOwnerName}} because root privileges are required for that, NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.109,FluidFS-MIB::fluidFSEventClientAccessOwnerOfDifferentTypes,,,,,,NFS access denied. File and group owner are inconsistent. Description: NFS Access Denied: both file owner and group owner must be from the same identity type (NTFS vs UNIX), attempt to set different identity types was detected. Client {{clientIpAddr}} User: {{nfsUserName}}, file {{dsidPath}} on NAS Volume {{nasContainerIdIntegerName}}, setting ownership: {{userOwnerName}} ({{userIdentityType}}) : {{groupOwnerName}} ({{groupIdentityType}}). Action Items: It is impossible to change file owner id to UID if the original file ownership is SID/GSID. If the user wants to change the ownership of the file to UNIX ownership, he must set UID and GID at same time. For example: user chown michael:group and not chown michael.
.1.3.6.1.4.1.674.11000.2000.200.20.11.110,FluidFS-MIB::fluidFSEventClientAccessCifsOpNotAllowedDueVolumeStyle,,,,,,SMB access denied. Operation not permitted on {{volumeStyle}} volume. Description: Access Denied: User {{nfsUserName}} tried to '{{nfsOp}}' on a {{volumeStyle}} NAS Volume {{nasContainerIdIntegerName}}, file {{dsidPath}}. [[nl]]Choosing a volume security style dictates which protocol will be used to set permissions on files in this volume. This also sets certain limitations on operations which are not allowed for this security style: [[nl]]1. Setting an ACL for a file in a NAS volume defined with UNIX Security style. [[nl]]2. Setting mode for a file in a NAS volume defined with NTFS Security style. [[nl]]3. Changing the read-only flag for a file in a NAS volume defined with UNIX Security style. [[nl]]4. Setting SID/GSID ownership on UNIX Security style [[nl]]5. Setting UID/GID ownership on NTFS Security style. [[nl]]A user might try to perform one of the above actions and get an 'Access denied' error without understanding why. Action Items: The NAS Volume security style should be chosen according to the main intended usage. If a user needs to perform a security related activity which is forbidden, consider splitting the data into two separate NAS Volumes based on the access pattern.
.1.3.6.1.4.1.674.11000.2000.200.20.11.111,FluidFS-MIB::fluidFSEventClientAccessConnectionFailurePermissionDenied,,,,,,Share {{cifsShare}} ACL's denied access to user {{userName}}. Description: Connection for user '{{userName}}' to share {{cifsShare}} denied due to share ACL permissions, client {{clientIpAddr}}, NAS Controller {{nasControllerId}}, NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.112,FluidFS-MIB::fluidFSEventClientAccessGeneralAccessDenied,,,,,,Access denied. Insufficient permissions, user {{userName}}. Description: Access denied on '{{cifsOp}}' operation. Desired access mask: {{desiredCifsAccessMaskName}}, missing bits: {{missedCifsAccessBitsName}}, client: {{clientIpAddr}}, user: {{userName}}, file '{{dsidPath}}' on NAS Volume {{nasContainerIdIntegerName}}. Internal Information: {{internalInfo}} 
.1.3.6.1.4.1.674.11000.2000.200.20.11.113,FluidFS-MIB::fluidFSEventClientAccessNfs4WritePseudoFS,,,,,,Write Access to pseudo-fs of {{TenantName}}, user {{userName}}. Description: Write Access denied to user {{userName}}. Attempted modification of NFS4 Pseudo File System of {{TenantName}}). Client IP: {{clientIpAddr}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.114,FluidFS-MIB::fluidFSEventClientAccessAccessDeniedOpenModeConflict,,,,,,Access Denied. Open mode conflict; user {{userName}}. Description: Access Denied on '{{operation}}' operation due open mode conflict. Desired access mask: {{desiredCifsAccessMaskName}}, open mode mask: {{openModeAccessBitsName}}, client: {{clientIpAddr}}, user: {{userName}}, file '{{dsidPath}}' on NAS Volume {{nasContainerIdIntegerName}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.11.115,FluidFS-MIB::fluidFSEventClientAccessAccessDeniedShareModeConflict,,,,,,Access Denied. Conflict with share mode; NAS Volume {{nasContainerIdIntegerName}}. Description: Access Denied: User {{userName}} accessing from client {{clientIpAddr}} tried to open file {{dsidPath}} on NAS Volume {{nasContainerIdIntegerName}}, which is opened with conflicting share mode by another user.
.1.3.6.1.4.1.674.11000.2000.200.20.11.116,FluidFS-MIB::fluidFSEventClientAccessDeleteOnCloseIsSet,,,,,,Access denied. File marked for deletion; File {{dsidPath}}. Description: Access denied: the file is marked for deletion. Client: {{clientIpAddr}}, user: {{userName}}, file {{dsidPath}} on NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.117,FluidFS-MIB::fluidFSEventClientAccessUserPasswordExpired,,,,,,SMB client login to {{TenantName}} failed. Password expired for user {{userName}}. Description: SMB client login failure: Password expired for client {{clientIpAddr}} user name '{{userName}}'. NAS Controller {{nasControllerId}} of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.118,FluidFS-MIB::fluidFSEventClientAccessNoSuchUser,,,,,,SMB client login to {{TenantName}} failed. The user {{userName}} could not be found. Description: SMB client login failure: The login username '{{userName}}' could not be found for client {{clientIpAddr}}. NAS Controller {{nasControllerId}} of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.119,FluidFS-MIB::fluidFSEventClientAccessCifsAccessDeniedDueShareLevelPerms2,,,,,,Share-level permissions denied access; share {{cifsShare}}. Description: SMB access denied on '{{cifsOp}}' operation: share-level permission applied for the share {{cifsShare}} prohibits such actions. Desired access mask: {{desiredCifsAccessMaskName}}, client: {{clientIpAddr}}, user: {{userName}}, file '{{nasContainerPath}}' on NAS Volume {{nasContainerIdIntegerName}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.11.120,FluidFS-MIB::fluidFSEventClientAccessCifsDotSnapshotsAccessDeniedDueToRestriction,,,,,,Snapshot Access denied due to restriction Description: SMB snapshot access to share {{cifsShare}} was denied due to 
.1.3.6.1.4.1.674.11000.2000.200.20.11.121,FluidFS-MIB::fluidFSEventClientAccessNfsDotSnapshotsAccessDeniedDueToRestriction,,,,,,Snapshot Access denied due to restriction Description: NFS snapshot access to file: {{nasContainerIdIntegerName}}/{{dsidPath}} for user {{nfsUserName}} was denied due to 
.1.3.6.1.4.1.674.11000.2000.200.20.11.122,FluidFS-MIB::fluidFSEventClientAccessCifsUserHasNoPrivileges2,,,,,,SMB access denied. User {{cifsUser2Name}} has insufficient privileges. Description: SMB access denied: accessing user does not have required privileges {{cifsPrivileges}} to perform '{{cifsOp}}', client: {{clientIpAddr}}, user: {{cifsUser2Name}}, file '{{nasContainerPath}}' on NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.123,FluidFS-MIB::fluidFSEventClientAccessCifsUserHasNoPrivileges3,,,,,,SMB access denied. User {{cifsUser2Name}} has insufficient privileges Description: SMB access denied: accessing user does not have required privileges {{cifsPrivileges}} to perform '{{cifsOp}}', client: {{clientIpAddr}}, user: {{cifsUser2Name}}, file '{{dsidPath}}' on NAS Volume {{nasContainerIdIntegerName}}
.1.3.6.1.4.1.674.11000.2000.200.20.11.124,FluidFS-MIB::fluidFSEventClientAccessNestedNetgroupNotFound,,,,,,Missing netgroup '{{netgroupName}}' could not be found by {{TenantName}}. Description: Nested netgroup '{{netgroupName}}' of parent netgroup '{{parentNetgroupName}}' was not found while resolving recursive definitions of export access list during NFS mount operation on {{TenantName}}. Missing netgroup was ignored. Action Items: Please check the content of the NIS/LDAP external repository and fix the definition of broken netgroup.
.1.3.6.1.4.1.674.11000.2000.200.20.11.125,FluidFS-MIB::fluidFSEventClientAccessNetgroupRecursionIsTooDeep,,,,,,Netgroup '{{netgroupName}}' has too many levels of nesting on {{TenantName}}. Description: Circular netgroup definitions alert: netgroup has too many levels of nesting. Netgroup '{{netgroupName}}' exceeded the limit of {{netgroupThreshold}} levels of nesting on {{TenantName}}. Action Items: Consider reviewing your NIS/LDAP external repository for circular netgroup definitions.
.1.3.6.1.4.1.674.11000.2000.200.20.11.126,FluidFS-MIB::fluidFSEventClientAccessSMBMemThreshold3,,,,,,Due to SMB high memory access denied on open file operation Description: SMB access denied on open file operation for user: {{cifsUser2Name}}, file '{{nasContainerPath}}' on NAS Volume {{nasContainerIdIntegerName}} due to SMB high memory consumption on NAS controller {{nasControllerId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.127,FluidFS-MIB::fluidFSEventClientAccessSMBMemThreshold4,,,,,,Due to SMB high resource usage new sessions not allowed. Description: Due to SMB high resource usage new sessions are not allowed on NAS controller {{nasControllerId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.128,FluidFS-MIB::fluidFSEventClientAccessRpcSecGssAuthFailure,,,,,,NFS RPCSECGSS user authentication failure for user {{userName}} on {{TenantName}}. Description: NFS RPCSECGSS authentication for user '{{userName}}' failed, client {{clientIpAddr}}, NAS controller {{nasControllerId}} of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.129,FluidFS-MIB::fluidFSEventClientAccessSMBMaxOpenFilesThreshold,,,,,,Due to SMB too many open files denied open file operation. Description: SMB access denied on open file operation due to SMB too many open files on NAS controller {{nasControllerId}}. Allowed number of open files per node is {{maxOpenFilesPerNode}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.130,FluidFS-MIB::fluidFSEventClientAccessExtensionIsDeniedOnShare,,,,,,SMB access denied. Extension {{fileExtension}} is denied on share {{cifsShare}}. Description: SMB access denied: Extension based access is configured on share {{cifsShare}} on NAS volume {{nasContainerIdIntegerName}}, and extension {{fileExtension}} of file {{nasContainerPath}} is denied. User {{cifsUser2Name}} is not a member of the users groups to be excluded from filtering.
.1.3.6.1.4.1.674.11000.2000.200.20.11.131,FluidFS-MIB::fluidFSEventClientAccessAutoHomeDirCreationError,,,,,,Error on creation home directory for user {{cifsUser2Name}}. Description: Auto home directory creation failed for user {{cifsUser2Name}} on NAS volume {{nasContainerIdIntegerName}} with path {{nasContainerPath}}. NT error code {{cifsErrorCode}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.132,FluidFS-MIB::fluidFSEventClientAccessMountDeniedOnVip,,,,,,NFS mount Denied. Path denied {{mountPath}} on subnet {{clusterVIP}} Description: NFS client {{clientIpAddr}} was trying to mount NFS export with path {{mountPath}} via cluster VIP {{clusterVIP}} but access from this subnet is not allowed by this NFS export. Access was denied. Client was accessing the export in blind mode that can be considered as security issue.
.1.3.6.1.4.1.674.11000.2000.200.20.11.133,FluidFS-MIB::fluidFSEventClientAccessCifsTreeConnectDeniedOnVip,,,,,,Access from disallowed subnet to share {{cifsShare}} was denied Description: Connection for user '{{userName}}' to share {{cifsShare}} denied because access from this subnet is not allowed by SMB share settings, client {{clientIpAddr}}, NAS Controller {{nasControllerId}}, NAS Volume {{nasContainerIdIntegerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.134,FluidFS-MIB::fluidFSEventClientAccessNoRootForOperation,,,,,,NFS access denied. Root privileges on export needed for {{operation}}. Description: NFS Access Denied: Client {{clientIpAddr}} can't execute operation {{operation}} with volume {{nasContainerIdIntegerName}} because root privileges are required for the client in the relevant NFS export.
.1.3.6.1.4.1.674.11000.2000.200.20.11.135,FluidFS-MIB::fluidFSEventClientAccessFtpLoginFailed,,,,,,FTP user log-in to {{TenantName}} failed Description: FTP access to {{TenantName}} from {{clientIpAddr}} is denied for user {{userName}}. Action Items: When the client attempts FTP connection but provides bad account details, this event is generated. Possible reasons: wrong password, bad username, disabled anonymous access, account is disabled, password is expired and needs to be changed. The user should verify account details.
.1.3.6.1.4.1.674.11000.2000.200.20.11.136,FluidFS-MIB::fluidFSEventClientAccessFtpLoginAccountProblem,,,,,,FTP user log-in to {{TenantName}} failed due to problematic account Description: FTP client {{clientIpAddr}} user {{userName}} log-in to {{TenantName}} failed due to problematic account Action Items: When the client makes FTP connection but provided account has problems, this event is generated. Possible reasons: account is locked, account is expired, logon with this account is disabled. System administrator might provide support to the user to fix the account problem.
.1.3.6.1.4.1.674.11000.2000.200.20.11.137,FluidFS-MIB::fluidFSEventClientAccessFtpLoginInternalProblem,,,,,,FTP user log-in to {{TenantName}} failed due to an internal problem Description: FTP client {{clientIpAddr}} user {{userName}} log-in to {{TenantName}} failed due to internal problem Internal Information: {{internalInfo}}
.1.3.6.1.4.1.674.11000.2000.200.20.11.138,FluidFS-MIB::fluidFSEventClientAccessFtpLoginSucceeded,,,,,,FTP user logged into {{TenantName}} Description: FTP client {{clientIpAddr}} user {{userName}} logged into {{TenantName}} Action Items: When the client makes FTP connection and successfully logs in, this event is generated
.1.3.6.1.4.1.674.11000.2000.200.20.11.139,FluidFS-MIB::fluidFSEventClientAccessFtpAnonymousLoggedIn,,,,,,FTP Anonymous user logged into {{TenantName}} Description: FTP Anonymous user logged into {{TenantName}} with email {{userEmail}} from {{clientIpAddr}}. Action Items: We register an event for every anonymous user logins.
.1.3.6.1.4.1.674.11000.2000.200.20.11.140,FluidFS-MIB::fluidFSEventClientAccessFtpTlsHandshakeVerMismatch,,,,,,FTP user log-in to {{TenantName}} failed due to wrong TLS version Description: FTP client {{clientIpAddr}} log-in to {{TenantName}} failed due to TLS protocol version mismatch Action Items: Please make sure FTP client software supports encryption method version TLS 1.{{tlsVersion}}
.1.3.6.1.4.1.674.11000.2000.200.20.11.141,FluidFS-MIB::fluidFSEventClientAccessMaxFtpConnectionsReached,,,,,,Reached Maximum FTP connections on NAS controller {{nasControllerId}} of {{TenantName}}. Maximum connection allowed per controller is {{maxConnections}} Action Items: This failure is common when there are too many FTP connections to the same fsd.
.1.3.6.1.4.1.674.11000.2000.200.20.11.142,FluidFS-MIB::fluidFSEventClientAccessFtpMissingBaseLandingDir,,,,,,FTP user log-in to {{TenantName}} failed due to missing landing path Description: FTP client {{clientIpAddr}} user {{userName}} log-in to {{TenantName}} failed due to missing landing directory '{{baseLandingPath}}' on volume {{nasContainerIdIntegerName}}}. Action Items: When the client makes FTP connection and successfully logs in but landing directory does not exist, this event is generated. Please create the landing directory.
.1.3.6.1.4.1.674.11000.2000.200.20.11.143,FluidFS-MIB::fluidFSEventClientAccessFtpMissingHomeLandingDir,,,,,,FTP user log-in to {{TenantName}} failed due to missing home landing path Description: FTP client {{clientIpAddr}} user {{userName}} log-in to {{TenantName}} failed due to missing home directory '{{suffixLandingPath}}' within base landing directory '{{baseLandingPath}}' on volume {{nasContainerIdIntegerName}} Action Items: When the client makes FTP connection and successfully logs in but home landing directory does not exist, this event is generated. FTP does not create home folders automatically. Please create them manually.
.1.3.6.1.4.1.674.11000.2000.200.20.11.144,FluidFS-MIB::fluidFSEventClientAccessHdfsMaxConnectionsReached,,,,,,Reached maximum HDFS connections Description: Reached Maximum HDFS connections. Action Items: This failure is common when there are too many HDFS connections to the same fsd.
.1.3.6.1.4.1.674.11000.2000.200.20.11.145,FluidFS-MIB::fluidFSEventClientAccessHdfsUserNotFound,,,,,,HDFS user name was not found in any of the repositories of {{TenantName}} Description: HDFS access from {{clientIpAddr}} provided the user name {{userName}}, but a corresponding user was not found in any of the repositories of {{TenantName}}
.1.3.6.1.4.1.674.11000.2000.200.20.11.146,FluidFS-MIB::fluidFSEventClientAccessHdfsDotSnapshotsAccessDeniedDueToRestriction,,,,,,Snapshot Access denied by {{TenantName}} due to restriction Description: Snapshot access to the HDFS landing directory of NAS Volume {{nasContainerIdIntegerName}} of {{TenantName}} was denied due to '.snapshots' restriction. client: {{clientIpAddr}}, user: {{userName}}, path: '{{baseLandingPath}}'. 
.1.3.6.1.4.1.674.11000.2000.200.20.11.147,FluidFS-MIB::fluidFSEventClientAccessGpoExecutionTimeoutFailure,,,,,,GPO Policy was not applied on {{TenantName}}. Took too much time. Description: Policy {{policyGuid}} {{policyName}} was not applied on {{TenantName}}. Took to much time.
.1.3.6.1.4.1.674.11000.2000.200.20.11.148,FluidFS-MIB::fluidFSEventClientAccessGpoOtherFailure,,,,,,GPO Policy was not applied on {{TenantName}} due to system error. Description: Policy {{policyGuid}} {{policyName}} was not applied on {{TenantName}} due to system error.
.1.3.6.1.4.1.674.11000.2000.200.20.11.149,FluidFS-MIB::fluidFSEventClientAccessGpoSuccess,,,,,,GPO Policy was applied successfully on {{TenantName}}. Description: Policy {{policyGuid}} {{policyName}} was applied successfully on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.150,FluidFS-MIB::fluidFSEventClientAccessGpoFileSecurityPolicyFailure,,,,,,GPO Policy on target on {{TenantName}} was not applied due to system error Description: Policy {{policyGuid}} {{policyName}} on target {{policyTargetPath}} was not applied due to system error on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.151,FluidFS-MIB::fluidFSEventClientAccessGpoFileSecurityPolicyDoNotReplaceFailure,,,,,,GPO Do Not Replace was not applied on {{TenantName}} due to system error. Description: Do not replace logic was not applied in Policy {{policyGuid}} {{policyName}} on target {{policyTargetPath}} due to system error on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.152,FluidFS-MIB::fluidFSEventClientAccessGpoInfFileReadFailure,,,,,,GPO Policy .inf file read failure on {{TenantName}}. Description: {{TenantName}} failed to read the .inf file {{filePath}} of the Policy {{policyGuid}} {{policyName}}
.1.3.6.1.4.1.674.11000.2000.200.20.11.153,FluidFS-MIB::fluidFSEventClientAccessCapLdapQueryFailure,,,,,,Central Access Policy LDAP query failure on {{TenantName}}. Description: LDAP query for Central Access Policy objects {{searchedObjects}} failed on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.154,FluidFS-MIB::fluidFSEventClientAccessCapCentralAccessRuleParsingFailure,,,,,,Central Access Policy rule parsing failure on {{TenantName}}. Description: Parsing of the Central Access Policy rule {{ruleDN}} of the policy {{policyDN}} failed on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.11.155,FluidFS-MIB::fluidFSEventClientAccessCapCentralAccessPolicyParsingFailure,,,,,,Central Access policy parsing failure on {{TenantName}}. Description: Parsing of the Central Access policy {{policyDN}} failed on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.13,FluidFS-MIB::fluidFSEventsLicensing,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.13.14,FluidFS-MIB::fluidFSEventLicensingEulaNotApprovedByUser,,,,,,End-user license agreement (EULA) was not accepted by user. Description: FluidFS version {{FluidFsVersion}} has a new end user license agreement. You must accept this agreement in order to use the system. Action Items: To accept the end user agreement go to User Interface System menu.
.1.3.6.1.4.1.674.11000.2000.200.20.14,FluidFS-MIB::fluidFSEventsExaminer,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.14.1,FluidFS-MIB::fluidFSEventExaminerSystemCorruption,,,,,,FluidFS Health Scan found an inconsistency in the system. Description: FluidFS Health Scan found an inconsistency in the system. Please contact Support. Internal Information: FluidFS Health Scan has found an error in {{category}} on level {{level}}
.1.3.6.1.4.1.674.11000.2000.200.20.14.3,FluidFS-MIB::fluidFSEventExaminerExaminingCycleFinished,,,,,,FluidFS Health Scan finished a scanning cycle. Description: FluidFS Health Scan finished a scanning cycle of the entire system
.1.3.6.1.4.1.674.11000.2000.200.20.15,FluidFS-MIB::fluidFSEventsComponent,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.15.3,FluidFS-MIB::fluidFSEventComponentExampleCreateSuccess,,,,,,Example {{Name}} was created by {{userName}}. Result: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.4,FluidFS-MIB::fluidFSEventComponentExampleCreateFailed,,,,,,Failed to create Example {{Name}} by {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.5,FluidFS-MIB::fluidFSEventComponentExampleCreateWarning,,,,,,Example {{Name}} was created by {{userName}}, but with a warning: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.6,FluidFS-MIB::fluidFSEventComponentExampleModifySuccess,,,,,,Example {{Name}} was modified by {{userName}}. Result: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.7,FluidFS-MIB::fluidFSEventComponentExampleModifyFailed,,,,,,Failed to modify Example {{Name}} by {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.8,FluidFS-MIB::fluidFSEventComponentExampleModifyWarning,,,,,,Example {{Name}} was modified by {{userName}}, but with a warning: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.9,FluidFS-MIB::fluidFSEventComponentExampleDeleteSuccess,,,,,,Example {{Name}} was deleted by {{userName}}. Result: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.10,FluidFS-MIB::fluidFSEventComponentExampleDeleteFailed,,,,,,Failed to delete {{Name}} by {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.11,FluidFS-MIB::fluidFSEventComponentExampleDeleteWarning,,,,,,Example {{Name}} was deleted by {{userName}}, but with a warning: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.12,FluidFS-MIB::fluidFSEventComponentTimeModifySuccess,,,,,,Time configuration was modified by {{userName}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.13,FluidFS-MIB::fluidFSEventComponentTimeModifyFailed,,,,,,Failed to modify time configuration by {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.14,FluidFS-MIB::fluidFSEventComponentRouteRulesCreateSuccess,,,,,,Route to {{destinationNetworkID}}/{{destinationPrefix}} with gateway IP {{routeGateway}} was successfully created by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.15,FluidFS-MIB::fluidFSEventComponentSnmpModifySuccess,,,,,,SNMP configuration was modified by {{userName}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.15.16,FluidFS-MIB::fluidFSEventComponentSnmpModifyFailed,,,,,,Failed to modify SNMP by {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.30,FluidFS-MIB::fluidFSEventComponentRouteRulesModifySuccess,,,,,,Route to {{destinationNetworkID}}/{{destinationPrefix}} with gateway IP {{routeGateway}} was successfully modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.31,FluidFS-MIB::fluidFSEventComponentMailConfModifySuccess,,,,,,Mail configuration was modified by {{userName}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.15.32,FluidFS-MIB::fluidFSEventComponentSystemServiceModeChangedSuccess,,,,,,The System Service Mode is changed to {{systemServiceState}}. Description: The System Service Mode is changed to {{systemServiceState}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.15.35,FluidFS-MIB::fluidFSEventComponentSystemServiceModeChangedFailed,,,,,,Failed to change System Service Mode. Description: The System Service Mode failed to be changed to {{systemServiceState}}: {{retcodeString}}. 
.1.3.6.1.4.1.674.11000.2000.200.20.15.36,FluidFS-MIB::fluidFSEventComponentNasAppliancesCreateSuccess,,,,,,NAS Appliance {{applianceId}} ({{applianceServiceTag}}) was successfully created by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.37,FluidFS-MIB::fluidFSEventComponentNasAppliancesCreateFailed,,,,,,NAS Appliance {{applianceId}} ({{applianceServiceTag}}) could not be created by user {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.38,FluidFS-MIB::fluidFSEventComponentNasAppliancesModifySuccess,,,,,,NAS Appliance {{applianceId}} ({{applianceServiceTag}}) was successfully modified by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.39,FluidFS-MIB::fluidFSEventComponentNasAppliancesModifyFailed,,,,,,NAS Appliance {{applianceId}} ({{applianceServiceTag}}) could not be modified by user {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.40,FluidFS-MIB::fluidFSEventComponentNasAppliancesDeleteSuccess,,,,,,NAS Appliance {{applianceId}} ({{applianceServiceTag}}) was successfully deleted by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.41,FluidFS-MIB::fluidFSEventComponentNasAppliancesDeleteFailed,,,,,,NAS Appliance {{applianceId}} ({{applianceServiceTag}}) could not be deleted by user {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.42,FluidFS-MIB::fluidFSEventComponentRestoreClusterCompletedSuccessfully,,,,,,The configuration of the cluster was restored successfully by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.43,FluidFS-MIB::fluidFSEventComponentRestoreClusterFinishedWithErrors,,,,,,Restore of cluster configuration finished with errors. Description: The configuration of the cluster was restored by user {{userName}} with errors: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.44,FluidFS-MIB::fluidFSEventComponentRestoreSystemCompletedSuccessfully,,,,,,The configuration of the system was restored successfully by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.45,FluidFS-MIB::fluidFSEventComponentRestoreSystemFinishedWithErrors,,,,,,Restore of system configuration finished with errors. Description: The configuration of the system was restored by user {{userName}} with errors: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.48,FluidFS-MIB::fluidFSEventComponentRestoreSystemFromFilesCompletedSuccessfully,,,,,,The configuration of the system was restored from files successfully by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.49,FluidFS-MIB::fluidFSEventComponentRestoreSystemFromFilesFinishedWithErrors,,,,,,Restore of system configuration finished with errors. Description: The configuration of the system was restored from files by user {{userName}} with errors: {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.62,FluidFS-MIB::fluidFSEventComponentStorageSubsystemCreateSuccess,,,,,,NAS pool was successfully created by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.63,FluidFS-MIB::fluidFSEventComponentStorageSubsystemCreateFailed,,,,,,NAS pool could not be created by {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.64,FluidFS-MIB::fluidFSEventComponentStorageSubsystemModifySuccess,,,,,,NAS pool was successfully expanded by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.65,FluidFS-MIB::fluidFSEventComponentStorageSubsystemModifyFailed,,,,,,NAS pool could not be expanded by {{userName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.72,FluidFS-MIB::fluidFSEventComponentAuthenticateAdministratorFailure,,,,,,User {{Domain}}\{{Name}} failed login to FluidFS {{UserInterfaceType}} from {{UserInterfaceClient}} client.
.1.3.6.1.4.1.674.11000.2000.200.20.15.73,FluidFS-MIB::fluidFSEventComponentServicePackRunSuccessEvent,,,,,,{{userName}} successfully upgraded with service pack file {{servicePackFileName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.74,FluidFS-MIB::fluidFSEventComponentServicePackRunFailedEvent,,,,,,{{userName}} failed upgrade with service pack file {{servicePackFileName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.75,FluidFS-MIB::fluidFSEventComponentEulaApproveSuccessEvent,,,,,,{{userName}} approved the EULA.
.1.3.6.1.4.1.674.11000.2000.200.20.15.76,FluidFS-MIB::fluidFSEventComponentAuthenticateAdministratorSuccess,,,,,,User {{Domain}}\{{Name}} logged in to FluidFS {{UserInterfaceType}} from {{UserInterfaceClient}} client.
.1.3.6.1.4.1.674.11000.2000.200.20.15.77,FluidFS-MIB::fluidFSEventComponentSetCurrentTimeActionEvent,,,,,,{{userName}} changed the current time.
.1.3.6.1.4.1.674.11000.2000.200.20.15.79,FluidFS-MIB::fluidFSEventComponentDataReductionConfigurationModifySuccess,,,,,,The user {{userName}} updated the configuration of Data Reduction schedule policy.
.1.3.6.1.4.1.674.11000.2000.200.20.15.93,FluidFS-MIB::fluidFSEventComponentClientNetworkInterfaceModifySuccess,,,,,,Client network interface was successfully modified to MTU {{clientNetworkInterfaceMtu}} and bonding mode {{clientNetworkInterfaceBondMode}} by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.94,FluidFS-MIB::fluidFSEventComponentEqlFabricCreateSuccess,,,,,,EQL fabric created by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.95,FluidFS-MIB::fluidFSEventComponentEqlFabricCreateWarning,,,,,,EQL fabric created by {{userName}}. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.96,FluidFS-MIB::fluidFSEventComponentEqlFabricModifySuccess,,,,,,EQL fabric modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.97,FluidFS-MIB::fluidFSEventComponentEqlFabricModifyWarning,,,,,,EQL fabric modified by {{userName}}. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.98,FluidFS-MIB::fluidFSEventComponentEqlFabricDeleteSuccess,,,,,,EQL fabric deleted by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.99,FluidFS-MIB::fluidFSEventComponentEqlFabricRoutesCreateSuccess,,,,,,EQL fabric route {{networkId}} created by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.100,FluidFS-MIB::fluidFSEventComponentEqlFabricRoutesModifySuccess,,,,,,EQL fabric route {{networkId}} modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.101,FluidFS-MIB::fluidFSEventComponentEqlFabricRoutesDeleteSuccess,,,,,,EQL fabric route {{networkId}} deleted by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.102,FluidFS-MIB::fluidFSEventComponentFabricIscsiV4CreateSuccess,,,,,,iSCSI IPv4 fabric {{Name}} created by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.103,FluidFS-MIB::fluidFSEventComponentFabricIscsiV4CreateWarning,,,,,,iSCSI IPv4 fabric {{Name}} created by {{userName}}. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.104,FluidFS-MIB::fluidFSEventComponentFabricIscsiV4ModifySuccess,,,,,,iSCSI IPv4 fabric {{Name}} modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.105,FluidFS-MIB::fluidFSEventComponentFabricIscsiV4ModifyWarning,,,,,,iSCSI IPv4 fabric {{Name}} modified by {{userName}}. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.106,FluidFS-MIB::fluidFSEventComponentFabricIscsiV4DeleteSuccess,,,,,,iSCSI IPv4 fabric {{Name}} deleted by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.107,FluidFS-MIB::fluidFSEventComponentStorageEqlGroupModifySuccess,,,,,,EQL storage group modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.108,FluidFS-MIB::fluidFSEventComponentStorageIscsiPortalsModifySuccess,,,,,,iSCSI storage portals modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.109,FluidFS-MIB::fluidFSEventComponentStorageIscsiPortalsModifyFailure,,,,,,Failure to modify iSCSI storage portals by {{userName}}. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.122,FluidFS-MIB::fluidFSEventComponentNasApplianceBlinkSuccess,,,,,,User {{userName}} set the appliance ID {{applianceId}} blink state for the 1st controller to {{blink1}} and the 2nd controller to {{blink2}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.123,FluidFS-MIB::fluidFSEventComponentRebootNasControllerSuccess,,,,,,User {{userName}} rebooted NAS controller {{controllerId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.124,FluidFS-MIB::fluidFSEventComponentMoveClientActionSuccess,,,,,,Client or router with {{ClientIp}} IP, which referred to {{AccessIp}} IP, was moved to controller{{NodeId}} by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.125,FluidFS-MIB::fluidFSEventComponentPinClientActionSuccess,,,,,,Client or router with {{ClientIp}} IP, which referred to {{AccessIp}} IP was restricted to the required controller (pin state is {{PinState}}) by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.126,FluidFS-MIB::fluidFSEventComponentClientLoadBalancingMassFailbackSuccess,,,,,,{{userName}} had performed failback of all the clients to their preferred controller.
.1.3.6.1.4.1.674.11000.2000.200.20.15.127,FluidFS-MIB::fluidFSEventComponentClientLoadBalancingMassRebalancingSuccess,,,,,,{{userName}} had performed a rebalance of all the clients between the controllers.
.1.3.6.1.4.1.674.11000.2000.200.20.15.128,FluidFS-MIB::fluidFSEventComponentNDMPConfigurationModifySuccess,,,,,,NDMP configuration was modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.134,FluidFS-MIB::fluidFSEventComponentAntiVirusHostsModifySuccess,,,,,,The user {{userName}} updated the antivirus hosts.
.1.3.6.1.4.1.674.11000.2000.200.20.15.136,FluidFS-MIB::fluidFSEventComponentClusterIdModifySuccess,,,,,,The user {{userName}} updated the cluster identifier.
.1.3.6.1.4.1.674.11000.2000.200.20.15.137,FluidFS-MIB::fluidFSEventComponentClusterNameModifySuccess,,,,,,The user {{userName}} renamed the cluster to {{ClusterName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.138,FluidFS-MIB::fluidFSEventComponentBackupConfigurationObjectsToFileSuccess,,,,,,The user {{userName}} backed up the cluster configuration to file.
.1.3.6.1.4.1.674.11000.2000.200.20.15.140,FluidFS-MIB::fluidFSEventComponentDestroyClusterSuccess,,,,,,The user {{userName}} destroyed the cluster.
.1.3.6.1.4.1.674.11000.2000.200.20.15.141,FluidFS-MIB::fluidFSEventComponentEMRecipientsModifySuccess,,,,,,The user {{userName}} updated the Enterprise Manager recipients.
.1.3.6.1.4.1.674.11000.2000.200.20.15.142,FluidFS-MIB::fluidFSEventComponentFabricFcCreateSuccess,,,,,,The user {{userName}} created {{FabricName}} Fibre Channel fabric.
.1.3.6.1.4.1.674.11000.2000.200.20.15.143,FluidFS-MIB::fluidFSEventComponentFabricFcModifySuccess,,,,,,The user {{userName}} updated {{FabricName}} Fibre Channel fabric.
.1.3.6.1.4.1.674.11000.2000.200.20.15.144,FluidFS-MIB::fluidFSEventComponentFabricFcDeleteSuccess,,,,,,The user {{userName}} deleted {{FabricName}} Fibre Channel fabric.
.1.3.6.1.4.1.674.11000.2000.200.20.15.147,FluidFS-MIB::fluidFSEventComponentFTPConfigurationModifySuccess,,,,,,The user {{userName}} updated the FTP configuration.
.1.3.6.1.4.1.674.11000.2000.200.20.15.148,FluidFS-MIB::fluidFSEventComponentHealthScanConfigurationModifySuccess,,,,,,The user {{userName}} updated the file system health scan configuration.
.1.3.6.1.4.1.674.11000.2000.200.20.15.150,FluidFS-MIB::fluidFSEventComponentLanguageModifySuccess,,,,,,The user {{userName}} updated the language of the cluster.
.1.3.6.1.4.1.674.11000.2000.200.20.15.152,FluidFS-MIB::fluidFSEventComponentLogoffActiveNdmpSessionSuccess,,,,,,The user {{userName}} killed {{NDMPSessionId}} NDMP session on NAS controller{{controllerId}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.154,FluidFS-MIB::fluidFSEventComponentNasPoolConfigurationModifySuccess,,,,,,The user {{userName}} updated the NAS pool thresholds.
.1.3.6.1.4.1.674.11000.2000.200.20.15.155,FluidFS-MIB::fluidFSEventComponentSupportAccessModifySuccess,,,,,,The user {{userName}} updated the support access settings.
.1.3.6.1.4.1.674.11000.2000.200.20.15.156,FluidFS-MIB::fluidFSEventComponentSystemConfigurationStateModifySuccess,,,,,,The user {{userName}} updated the system configuration state.
.1.3.6.1.4.1.674.11000.2000.200.20.15.158,FluidFS-MIB::fluidFSEventComponentTriggerFabricDiscoverySuccess,,,,,,The user {{userName}} triggered LUNs discovery.
.1.3.6.1.4.1.674.11000.2000.200.20.15.159,FluidFS-MIB::fluidFSEventComponentTrustedSystemCreateSuccess,,,,,,The user {{userName}} created partnership with {{PartnerIp}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.160,FluidFS-MIB::fluidFSEventComponentTrustedSystemModifySuccess,,,,,,The user {{userName}} updated partnership with {{PartnerIp}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.161,FluidFS-MIB::fluidFSEventComponentTrustedSystemDeleteSuccess,,,,,,The user {{userName}} deleted partnership with {{PartnerIp}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.162,FluidFS-MIB::fluidFSEventComponentUIConfigurationModifySuccess,,,,,,The user {{userName}} updated the UI settings.
.1.3.6.1.4.1.674.11000.2000.200.20.15.170,FluidFS-MIB::fluidFSEventComponentRunFileSystemDiagnosticSuccess,,,,,,The user {{userName}} ran core file system diagnostic. Description: The user {{userName}} ran core file system diagnostic.
.1.3.6.1.4.1.674.11000.2000.200.20.15.171,FluidFS-MIB::fluidFSEventComponentRunGeneralSystemDiagnosticSuccess,,,,,,The user {{userName}} ran general system diagnostic. Description: The user {{userName}} ran general system diagnostic.
.1.3.6.1.4.1.674.11000.2000.200.20.15.172,FluidFS-MIB::fluidFSEventComponentRunNetworkDiagnosticSuccess,,,,,,The user {{userName}} ran networking diagnostic. Description: The user {{userName}} ran networking diagnostic.[[nl]]Diagnostic arguments:[[nl]]ClientIP - {{RunNetworkDiagnosticClientIP}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.174,FluidFS-MIB::fluidFSEventComponentRunPerformanceDiagnosticSuccess,,,,,,The user {{userName}} ran performance diagnostic. Description: The user {{userName}} ran performance diagnostic.[[nl]]Diagnostic arguments:[[nl]]FSID - {{RunPerformanceDiagnosticFSID}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.178,FluidFS-MIB::fluidFSEventComponentRunFileSystemDiagnosticActionFailure,,,,,,File System diagnostic failed. Description: File System diagnostic, which was run by user {{userName}} failed.[[nl]]{{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.179,FluidFS-MIB::fluidFSEventComponentRunGeneralSystemDiagnosticActionFailure,,,,,,General System diagnostic failed. Description: General System diagnostic, which was run by user {{userName}} failed.[[nl]]{{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.180,FluidFS-MIB::fluidFSEventComponentRunNetworkDiagnosticActionFailure,,,,,,Network diagnostic failed. Description: Network diagnostic, which was run by user {{userName}} failed.[[nl]]Diagnostic arguments:[[nl]]ClientIP - {{RunNetworkDiagnosticClientIP}}[[nl]]{{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.182,FluidFS-MIB::fluidFSEventComponentRunPerformanceDiagnosticActionFailure,,,,,,Performance diagnostic failed. Description: Performance diagnostic, which was run by user {{userName}} failed.[[nl]]Diagnostic arguments:[[nl]]FSID - {{RunPerformanceDiagnosticFSID}}[[nl]]{{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.189,FluidFS-MIB::fluidFSEventComponentFileSystemCoreDiagnosticsFailed,,,,,,Failed to generate diagnostics package for 'FileSystemCoreDiagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.190,FluidFS-MIB::fluidFSEventComponentFileSystemCoreDiagnosticsFailesOk,,,,,,Package generation for 'FileSystemCoreDiagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.191,FluidFS-MIB::fluidFSEventComponentGeneralSystemDiagnosticsFailed,,,,,,Failed to generate diagnostics package for 'GeneralSystemDiagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.192,FluidFS-MIB::fluidFSEventComponentGeneralSystemDiagnosticsOk,,,,,,Package generation for 'GeneralSystemDiagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.193,FluidFS-MIB::fluidFSEventComponentNetworkDiagnosticsFailed,,,,,,Failed to generate diagnostics package for 'NetworkDiagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.194,FluidFS-MIB::fluidFSEventComponentNetworkDiagnosticsOk,,,,,,Package generation for 'NetworkDiagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.197,FluidFS-MIB::fluidFSEventComponentPerformanceDiagnosticsFailed,,,,,,Failed to generate diagnostics package for 'PerformanceDiagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.198,FluidFS-MIB::fluidFSEventComponentPerformanceDiagnosticsOk,,,,,,Package generation for 'PerformanceDiagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.201,FluidFS-MIB::fluidFSEventComponentExampleCreateStart,,,,,,Example {{Name}} create started by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.203,FluidFS-MIB::fluidFSEventComponentPostUpgradeActionsEvent,,,,,,System was successfully upgraded to version {{servicePackVersion}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.204,FluidFS-MIB::fluidFSEventComponentRouteRulesDeleteSuccess,,,,,,Route to {{destinationNetworkID}}/{{destinationPrefix}} with gateway IP {{routeGateway}} was successfully deleted by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.205,FluidFS-MIB::fluidFSEventComponentSecureConsoleAccessModifySuccess,,,,,,The user {{userName}} had modified the Secure Console Access settings Description: The user {{userName}} had modified the Secure Console Access settings
.1.3.6.1.4.1.674.11000.2000.200.20.15.206,FluidFS-MIB::fluidFSEventComponentSecureConsoleAccessModifyFailure,,,,,,{{userName}} failed to modify the Secure Console Access settings Description: The user {{userName}} had failed to modify the Secure Console Access settings due to the following error: {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.207,FluidFS-MIB::fluidFSEventComponentSecureConsoleAccessModifyWarning,,,,,,{{userName}} failed to modify the Secure Console Access settings Description: The user {{userName}} had failed to modify the Secure Console Access settings due to the following error: {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.209,FluidFS-MIB::fluidFSEventComponentExampleBackgroundCreateSuccess,,,,,,ExampleBackground {{Name}} was created .
.1.3.6.1.4.1.674.11000.2000.200.20.15.211,FluidFS-MIB::fluidFSEventComponentFilesystemCreatedStartingDomainMigration,,,,,,The NAS appliance is now part of the file-system. Starting resource optimization using domain migration.
.1.3.6.1.4.1.674.11000.2000.200.20.15.212,FluidFS-MIB::fluidFSEventComponentStartingJoinNASAppliance,,,,,,The system is starting to join the NAS appliance to the file-system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.213,FluidFS-MIB::fluidFSEventComponentFilesystemCreatedNoDomainMigrationRequired,,,,,,The NAS appliance is now part of the file-system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.214,FluidFS-MIB::fluidFSEventComponentEventsStoreFilterModifySuccess,,,,,,Events filter configuration was modified by {{userName}} Description: Events filter configuration was modified by {{userName}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.215,FluidFS-MIB::fluidFSEventComponentEventsStoreFilterModifyFailure,,,,,,{{userName}} had failed to modify the Events filter configuration Description: {{userName}} had failed to modify the Events filter configuration. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.216,FluidFS-MIB::fluidFSEventComponentPhoneHomeModifySuccess,,,,,,{{userName}} updated phone home settings Description: {{userName}} updated phone home settings
.1.3.6.1.4.1.674.11000.2000.200.20.15.219,FluidFS-MIB::fluidFSEventComponentBMCNetworkConfigurationModifySuccess,,,,,,The user {{userName}} updated the BMC network configuration.
.1.3.6.1.4.1.674.11000.2000.200.20.15.220,FluidFS-MIB::fluidFSEventComponentFSStorageConfigurationModifySuccess,,,,,,The user {{userName}} updated the file system storage configuration.
.1.3.6.1.4.1.674.11000.2000.200.20.15.223,FluidFS-MIB::fluidFSEventComponentUpgradeStandbyNodeSuccessEvent,,,,,,{{userName}} successfully flashed standby node with service pack file {{servicePackFileName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.224,FluidFS-MIB::fluidFSEventComponentUpgradeStandbyNodeFailedEvent,,,,,,{{userName}} failed to flash standby node with service pack file {{servicePackFileName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.225,FluidFS-MIB::fluidFSEventComponentPostUpgradeActionsWarningEvent,,,,,,Upgraded with warnings: {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.226,FluidFS-MIB::fluidFSEventComponentServicePackValidateSuccessEvent,,,,,,{{userName}} successfully validated service pack file {{servicePackFileName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.227,FluidFS-MIB::fluidFSEventComponentServicePackValidateFailedEvent,,,,,,{{userName}}: Failed validation of service pack file {{servicePackFileName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.228,FluidFS-MIB::fluidFSEventComponentCloneVMSuccess,,,,,,The user {{userName}} successfully created {{numberOfClones}} cloned virtual machines from {{sourceVMName}}. on server {{vmWareServerName}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.229,FluidFS-MIB::fluidFSEventComponentCreateVMWareServerSuccess,,,,,,The user {{userName}} created VMWare server {{vmWareServerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.230,FluidFS-MIB::fluidFSEventComponentModifyVMWareServerSuccess,,,,,,The user {{userName}} modified VMWare server {{vmWareServerName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.231,FluidFS-MIB::fluidFSEventComponentEnableMetadataRedundancyForNewVolumes,,,,,,Metadata redundancy for new NAS volumes was enabled by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.232,FluidFS-MIB::fluidFSEventComponentDisableMetadataRedundancyForNewVolumes,,,,,,Metadata redundancy for new NAS volumes was disabled by {{userName}}. Be aware that newly created NAS Volumes will be less resistant to failure
.1.3.6.1.4.1.674.11000.2000.200.20.15.234,FluidFS-MIB::fluidFSEventComponentModifyVMWareSettingsSuccess,,,,,,The user {{userName}} modified VMWare settings
.1.3.6.1.4.1.674.11000.2000.200.20.15.236,FluidFS-MIB::fluidFSEventComponentRunNdmpDiagnosticSuccess,,,,,,The user {{userName}} ran NDMP diagnostic. Description: The user {{userName}} ran NDMP diagnostic.
.1.3.6.1.4.1.674.11000.2000.200.20.15.237,FluidFS-MIB::fluidFSEventComponentRunNdmpDiagnosticActionFailure,,,,,,Ndmp diagnostic failed. Description: Ndmp diagnostic, which was run by user {{userName}} failed.[[nl]]{{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.238,FluidFS-MIB::fluidFSEventComponentNdmpDiagnosticsFailed,,,,,,Failed to generate diagnostics package for 'NdmpDiagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.239,FluidFS-MIB::fluidFSEventComponentNdmpDiagnosticsOk,,,,,,Package generation for 'NdmpDiagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.241,FluidFS-MIB::fluidFSEventComponentRediscoverLunsSuccess,,,,,,The system sucessfully triggered iSCSI targets discovery.
.1.3.6.1.4.1.674.11000.2000.200.20.15.247,FluidFS-MIB::fluidFSEventComponentFileAccessNotificationConfigModifySuccess,,,,,,File Access Notification settings updated Description: File Access Notification settings updated
.1.3.6.1.4.1.674.11000.2000.200.20.15.248,FluidFS-MIB::fluidFSEventComponentFileAccessNotificationPolicyModifySuccess,,,,,,File Access Notification Policy changed Description: File Access Notification Policy changed
.1.3.6.1.4.1.674.11000.2000.200.20.15.249,FluidFS-MIB::fluidFSEventComponentFileAccessNotificationSubscriberModifySuccess,,,,,,File Access Notifications Subscribers changed Description: File Access Notifications Subscribers changed
.1.3.6.1.4.1.674.11000.2000.200.20.15.250,FluidFS-MIB::fluidFSEventComponentTapeDeviceConfigurationCreateSuccess,,,,,,The user {{userName}} created a new tape device with name {{tapeDeviceName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.251,FluidFS-MIB::fluidFSEventComponentTapeDeviceConfigurationModifySuccess,,,,,,The user {{userName}} modified a tape device name to {{tapeDeviceName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.252,FluidFS-MIB::fluidFSEventComponentTapeDeviceConfigurationDeleteSuccess,,,,,,The user {{userName}} deleted a tape device with name {{tapeDeviceName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.253,FluidFS-MIB::fluidFSEventComponentInternalStorageReservationSetSuccess,,,,,,The user {{userName}} set the internal storage reservation Description: The user {{userName}} set the internal storage reservation. Current configuration: events - {{eventsSpace}} MB
.1.3.6.1.4.1.674.11000.2000.200.20.15.254,FluidFS-MIB::fluidFSEventComponentBwLimiterCreateSuccess,,,,,,The user {{userName}} created Bw Limiter {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.255,FluidFS-MIB::fluidFSEventComponentBwLimiterModifySuccess,,,,,,The user {{userName}} updated the configuration of BW Limiter {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.256,FluidFS-MIB::fluidFSEventComponentBwLimiterDeleteSuccess,,,,,,The user {{userName}} deleted BW Limiter {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.258,FluidFS-MIB::fluidFSEventComponentStorageDevicesRescanSuccessEvent,,,,,,The user {{userName}} performed rescan storage devices.
.1.3.6.1.4.1.674.11000.2000.200.20.15.264,FluidFS-MIB::fluidFSEventComponentVAppCloningSuccess,,,,,,The user {{userName}} has successfully cloned VMware Virtual Appliance
.1.3.6.1.4.1.674.11000.2000.200.20.15.265,FluidFS-MIB::fluidFSEventComponentTenantCreateSuccess,,,,,,The user {{userName}} created Tenant {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.266,FluidFS-MIB::fluidFSEventComponentTenantModifySuccess,,,,,,The user {{userName}} updated the configuration of {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.267,FluidFS-MIB::fluidFSEventComponentTenantDeleteSuccess,,,,,,The user {{userName}} deleted Tenant {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.268,FluidFS-MIB::fluidFSEventComponentVirtualVolumeCreateSuccess,,,,,,The user {{userName}} created NAS volume {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.269,FluidFS-MIB::fluidFSEventComponentVirtualVolumeModifySuccess,,,,,,The user {{userName}} updated the configuration of NAS volume {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.270,FluidFS-MIB::fluidFSEventComponentVirtualVolumeDeleteSuccess,,,,,,The user {{userName}} deleted NAS volume {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.271,FluidFS-MIB::fluidFSEventComponentSnapshotsRestoreSuccess,,,,,,The user {{userName}} restored snapshot {{SnapshotID}} - {{Name}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.272,FluidFS-MIB::fluidFSEventComponentSnapshotModifySuccess,,,,,,The user {{userName}} modified snapshot {{SnapshotID}} on NAS volume {{FSIDName}} to name {{Name}} and expiry {{Expiry}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.273,FluidFS-MIB::fluidFSEventComponentSnapshotModifyFailure,,,,,,The user {{userName}} failed to rename snapshot {{SnapshotID}} on NAS volume {{FSIDName}} to name {{Name}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.274,FluidFS-MIB::fluidFSEventComponentSnapshotDeleteSuccess,,,,,,The user {{userName}} deleted snapshot {{SnapshotID}} - {{Name}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.275,FluidFS-MIB::fluidFSEventComponentSnapshotDeleteFailure,,,,,,The user {{userName}} failed to delete snapshot {{SnapshotID}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.276,FluidFS-MIB::fluidFSEventComponentSnapshotCreateSuccess,,,,,,The user {{userName}} created snapshot {{SnapshotID}} - {{Name}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.277,FluidFS-MIB::fluidFSEventComponentSnapshotCreateFailure,,,,,,The user {{userName}} failed to create snapshot {{SnapshotID}} - {{Name}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.278,FluidFS-MIB::fluidFSEventComponentSnapshotMakeManualSuccess,,,,,,The user {{userName}} set NDMP lock on snapshot {{SnapshotID}} on NAS volume {{FSIDName}} to {{NdmpLock}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.279,FluidFS-MIB::fluidFSEventComponentDnsModifySuccess,,,,,,DNS configuration of {{TenantName}} was modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.280,FluidFS-MIB::fluidFSEventComponentDnsModifyWarning,,,,,,DNS configuration of {{TenantName}} was modified by {{userName}}. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.281,FluidFS-MIB::fluidFSEventComponentSnapshotsRestoreSuccessName,,,,,,Snapshot {{SnapshotID}} - {{Name}} was restored on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.282,FluidFS-MIB::fluidFSEventComponentSnapshotsRestoreFailureName,,,,,,Snapshot {{SnapshotID}} - {{Name}} failed to be restored on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.283,FluidFS-MIB::fluidFSEventComponentRestoreVirtualVolumeCompletedSuccessfully,,,,,,The configuration of the NAS volume {{FSIDName}} was restored successfully by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.284,FluidFS-MIB::fluidFSEventComponentRestoreVirtualVolumeFinishedWithErrors,,,,,,Restore NAS container configuration {{FSIDName}} finished with errors. Description: The configuration of the NAS container {{FSIDName}} was restored by user {{userName}} with errors: {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.285,FluidFS-MIB::fluidFSEventComponentRestoreVirtualVolumeFromFilesCompletedSuccessfully,,,,,,The configuration of the NAS volume {{FSIDName}} was restored from files successfully by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.286,FluidFS-MIB::fluidFSEventComponentRestoreVirtualVolumeFromFilesFinishedWithErrors,,,,,,Restore NAS volume {{FSIDName}} configuration finished with errors. Description: The configuration of the NAS volume {{FSIDName}} was restored from files by user {{userName}} with errors: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.287,FluidFS-MIB::fluidFSEventComponentAdministratorCreateSuccess,,,,,,The user {{userName}} created new administrator {{AdminName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.288,FluidFS-MIB::fluidFSEventComponentAdministratorModifySuccess,,,,,,The user {{userName}} modified the configuration of administrator {{AdminName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.289,FluidFS-MIB::fluidFSEventComponentAdministratorDeleteSuccess,,,,,,The user {{userName}} deleted administrator {{AdminName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.290,FluidFS-MIB::fluidFSEventComponentCifsShareCreateSuccess,,,,,,The user {{userName}} created the {{shareName}} SMB share on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.291,FluidFS-MIB::fluidFSEventComponentCifsShareModifySuccess,,,,,,The user {{userName}} updated the configuration of {{shareName}} SMB share on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.292,FluidFS-MIB::fluidFSEventComponentCifsShareDeleteSuccess,,,,,,The user {{userName}} deleted the {{shareName}} SMB share on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.293,FluidFS-MIB::fluidFSEventComponentCifsHomeShareModifySuccess,,,,,,The user {{userName}} updated the configuration of home SMB share on {{FSIDName}} NAS volume of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.294,FluidFS-MIB::fluidFSEventComponentNfsExportCreateSuccess,,,,,,The user {{userName}} created the {{NFSExportPath}} NFS export on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.295,FluidFS-MIB::fluidFSEventComponentNfsExportModifySuccess,,,,,,The user {{userName}} updated the configuration of {{NFSExportPath}} NFS export on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.296,FluidFS-MIB::fluidFSEventComponentNfsExportDeleteSuccess,,,,,,The user {{userName}} deleted {{NFSExportPath}} NFS export on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.297,FluidFS-MIB::fluidFSEventComponentSnapshotScheduleCreateSuccess,,,,,,The user {{userName}} created the {{Name}} snapshot schedule on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.298,FluidFS-MIB::fluidFSEventComponentSnapshotScheduleModifySuccess,,,,,,The user {{userName}} updated the configuration of {{Name}} snapshot schedule on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.299,FluidFS-MIB::fluidFSEventComponentSnapshotScheduleDeleteSuccess,,,,,,The user {{userName}} deleted the {{Name}} snapshot schedule on {{FSIDName}} NAS volume.
.1.3.6.1.4.1.674.11000.2000.200.20.15.300,FluidFS-MIB::fluidFSEventComponentReplicationScheduleCreateSuccess,,,,,,The user {{userName}} created the {{Name}} schedule for replication between {{FSIDName}} and {{remoteVolumeName}}@{{remoteClusterName}} NAS volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.15.301,FluidFS-MIB::fluidFSEventComponentReplicationScheduleModifySuccess,,,,,,The user {{userName}} updated the configuration of {{Name}} schedule for replication between {{FSIDName}} and {{remoteVolumeName}}@{{remoteClusterName}} NAS volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.15.302,FluidFS-MIB::fluidFSEventComponentReplicationScheduleDeleteSuccess,,,,,,The user {{userName}} deleted the {{Name}} schedule for replication between {{FSIDName}} and {{remoteVolumeName}}@{{remoteClusterName}} NAS volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.15.303,FluidFS-MIB::fluidFSEventComponentSnapshotDeleteSuccessNoName,,,,,,The user {{userName}} deleted snapshot {{SnapshotID}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.304,FluidFS-MIB::fluidFSEventComponentReplicationActionAttachSuccess,,,,,,The user {{userName}} has connected {{FSIDName}} volume to {{remoteVolume}} volume of {{remoteSystemName}} system. Description: The user {{userName}} has connected NAS volume to {{remoteVolume}} NAS volume of {{remoteSystemName}} system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.305,FluidFS-MIB::fluidFSEventComponentReplicationActionDetachSuccess,,,,,,The user {{userName}} has disconnected {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} volumes. Description: The user {{userName}} has disconnected the replication between {{FSIDName}} NAS volume and {{remoteVolume}} NAS volume of {{remoteSystemName}} system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.306,FluidFS-MIB::fluidFSEventComponentReplicationActionPauseSuccess,,,,,,The user {{userName}} has disabled replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} volumes. Description: The user {{userName}} has disabled the replication between {{FSIDName}} NAS volume and {{remoteVolume}} NAS volume of {{remoteSystemName}} system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.307,FluidFS-MIB::fluidFSEventComponentReplicationActionResumeSuccess,,,,,,The user {{userName}} has enabled replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} volumes. Description: The user {{userName}} has enabled the replication between {{FSIDName}} NAS volume and {{remoteVolume}} NAS volume of {{remoteSystemName}} system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.308,FluidFS-MIB::fluidFSEventComponentReplicationActionPromoteSuccess,,,,,,The user {{userName}} has promoted replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} volumes. Description: The user {{userName}} has promoted replication between {{FSIDName}} NAS volume and {{remoteVolume}} NAS volume of {{remoteSystemName}} system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.309,FluidFS-MIB::fluidFSEventComponentReplicationActionDemoteSuccess,,,,,,The user {{userName}} has demoted replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} volumes. Description: The user {{userName}} has demoted replication between {{FSIDName}} NAS volume and {{remoteVolume}} NAS volume of {{remoteSystemName}} system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.310,FluidFS-MIB::fluidFSEventComponentReplicationActionStartSuccess,,,,,,The user {{userName}} has started replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} volumes. Description: The user {{userName}} has started replication from {{FSIDName}} NAS volume to {{remoteVolume}} NAS volume of {{remoteSystemName}} system.
.1.3.6.1.4.1.674.11000.2000.200.20.15.311,FluidFS-MIB::fluidFSEventComponentCreateBlockStorageSuccess,,,,,,BlockStorage {{storageId}} was successfully created.
.1.3.6.1.4.1.674.11000.2000.200.20.15.312,FluidFS-MIB::fluidFSEventComponentModifyBlockStorageSuccess,,,,,,Client subnet {{storageId}} was successfully modified.
.1.3.6.1.4.1.674.11000.2000.200.20.15.313,FluidFS-MIB::fluidFSEventComponentDeleteBlockStorageSuccess,,,,,,Client subnet {{storageId}} was successfully deleted.
.1.3.6.1.4.1.674.11000.2000.200.20.15.314,FluidFS-MIB::fluidFSEventComponentSubnetsCreateSuccess,,,,,,Client subnet {{networkId}}/{{prefix}} was successfully created by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.315,FluidFS-MIB::fluidFSEventComponentSubnetsModifySuccess,,,,,,Client subnet {{networkId}}/{{prefix}} was successfully modified by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.316,FluidFS-MIB::fluidFSEventComponentSubnetsDeleteSuccess,,,,,,Client subnet {{networkId}}/{{prefix}} was successfully deleted by {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.317,FluidFS-MIB::fluidFSEventComponentActiveDirectoryJoinSuccess,,,,,,The user {{userName}} has successfully joined {{TenantName}} to Active Directory domain '{{Domain}}'.
.1.3.6.1.4.1.674.11000.2000.200.20.15.318,FluidFS-MIB::fluidFSEventComponentActiveDirectoryJoinWarning,,,,,,The user {{userName}} has joined {{TenantName}} to Active Directory domain '{{Domain}}', but with a warning: {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.319,FluidFS-MIB::fluidFSEventComponentActiveDirectoryLeaveSuccess,,,,,,The user {{userName}} has successfully left {{TenantName}} from Active Directory domain.
.1.3.6.1.4.1.674.11000.2000.200.20.15.320,FluidFS-MIB::fluidFSEventComponentLocalUsersCreateSuccess,,,,,,The user {{userName}} has successfully added new Local User '{{localAccountName}}' to {{TenantName}} cluster repository.
.1.3.6.1.4.1.674.11000.2000.200.20.15.321,FluidFS-MIB::fluidFSEventComponentLocalUsersDeleteSuccess,,,,,,The user {{userName}} has successfully deleted Local User '{{localAccountName}}' from {{TenantName}} cluster repository.
.1.3.6.1.4.1.674.11000.2000.200.20.15.322,FluidFS-MIB::fluidFSEventComponentLocalUsersModifySuccess,,,,,,The user {{userName}} has successfully modified Local User '{{localAccountName}}' in {{TenantName}} cluster repository.
.1.3.6.1.4.1.674.11000.2000.200.20.15.323,FluidFS-MIB::fluidFSEventComponentLocalGroupsCreateSuccess,,,,,,The user {{userName}} has successfully added new Local Group '{{localAccountName}}' to {{TenantName}} cluster repository.
.1.3.6.1.4.1.674.11000.2000.200.20.15.324,FluidFS-MIB::fluidFSEventComponentLocalGroupsDeleteSuccess,,,,,,The user {{userName}} has successfully deleted Local Group '{{localAccountName}}' from {{TenantName}} cluster repository.
.1.3.6.1.4.1.674.11000.2000.200.20.15.325,FluidFS-MIB::fluidFSEventComponentLocalGroupsModifySuccess,,,,,,The user {{userName}} has successfully modified Local Group '{{localAccountName}}' in {{TenantName}} cluster repository.
.1.3.6.1.4.1.674.11000.2000.200.20.15.326,FluidFS-MIB::fluidFSEventComponentUserDatabaseModifySuccess,,,,,,The user {{userName}} has successfully re-configured UNIX external repository of {{TenantName}} to use '{{userDatabaseType}}' accounts database.
.1.3.6.1.4.1.674.11000.2000.200.20.15.327,FluidFS-MIB::fluidFSEventComponentMappingPolicyModifySuccess,,,,,,The user {{userName}} has successfully re-configured users mapping policy of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.328,FluidFS-MIB::fluidFSEventComponentManualMappingsCreateSuccess,,,,,,The user {{userName}} has successfully added new manual mapping rule between Windows user '{{windowsUserName}}' and UNIX user '{{unixUserName}}' on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.329,FluidFS-MIB::fluidFSEventComponentManualMappingsDeleteSuccess,,,,,,The user {{userName}} has successfully deleted manual mapping rule between Windows user '{{windowsUserName}}' and UNIX user '{{unixUserName}}' on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.330,FluidFS-MIB::fluidFSEventComponentManualMappingsModifySuccess,,,,,,The user {{userName}} has successfully modified manual mapping rule between Windows user '{{windowsUserName}}' and UNIX user '{{unixUserName}}' on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.331,FluidFS-MIB::fluidFSEventComponentQuotaRuleCreateSuccess,,,,,,The user {{userName}} created quota rule on volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.332,FluidFS-MIB::fluidFSEventComponentQuotaRuleModifySuccess,,,,,,The user {{userName}} modified quota rule on volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.333,FluidFS-MIB::fluidFSEventComponentQuotaRuleDeleteSuccess,,,,,,The user {{userName}} deleted quota rule on volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.334,FluidFS-MIB::fluidFSEventComponentCifsProtocolModifySuccess,,,,,,The user {{userName}} updated the general local users settings of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.335,FluidFS-MIB::fluidFSEventComponentFileCloningSuccess,,,,,,The user {{userName}} cloned ({{FSIDName}}){{SourceFilePath}} to ({{FSIDName}}){{DestinationDir}}/{{DestinationFileName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.336,FluidFS-MIB::fluidFSEventComponentFolderCreateSuccess,,,,,,The user {{userName}} created {{DestinationParentDir}}/{{DestinationDir}} directory on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.337,FluidFS-MIB::fluidFSEventComponentNfsProtocolModifySuccess,,,,,,The user {{userName}} updated the general NFS settings of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.338,FluidFS-MIB::fluidFSEventComponentVirtualVolumeFolderCreateSuccess,,,,,,The user {{userName}} created {{VirtualVolumeFolderName}} NAS volumes folder on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.339,FluidFS-MIB::fluidFSEventComponentVirtualVolumeFolderModifySuccess,,,,,,The user {{userName}} updated {{VirtualVolumeFolderName}} NAS volumes folder on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.340,FluidFS-MIB::fluidFSEventComponentVirtualVolumeFolderDeleteSuccess,,,,,,The user {{userName}} deleted {{VirtualVolumeFolderName}} NAS volumes folder on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.341,FluidFS-MIB::fluidFSEventComponentRunHdfsDiagnosticSuccess,,,,,,The user {{userName}} ran HDFS diagnostic. Description: The user {{userName}} ran HDFS diagnostic.
.1.3.6.1.4.1.674.11000.2000.200.20.15.342,FluidFS-MIB::fluidFSEventComponentRunHdfsDiagnosticActionFailure,,,,,,Hdfs diagnostic failed. Description: Hdfs diagnostic, which was run by user {{userName}} failed.[[nl]]{{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.343,FluidFS-MIB::fluidFSEventComponentReplicationModifyRetPolicy,,,,,,The user {{userName}} has modified the replication snapshot retention. Description: The user {{userName}} has modified the replication snapshot retention policy for replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.15.344,FluidFS-MIB::fluidFSEventComponentHdfsDiagnosticsFailed,,,,,,Failed to generate diagnostics package for 'HdfsDiagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.345,FluidFS-MIB::fluidFSEventComponentHdfsDiagnosticsOk,,,,,,Package generation for 'HdfsDiagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.346,FluidFS-MIB::fluidFSEventComponentActiveDirectoryPreferredDcSuccess,,,,,,The user {{userName}} has successfully configured preferred domain controllers of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.347,FluidFS-MIB::fluidFSEventComponentFileCopySuccess,,,,,,The user {{userName}} copied {{SourceFSIDName}}\{{SourceFilePath}} to {{DestinationFSIDName}}\{{DestinationFilePath}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.348,FluidFS-MIB::fluidFSEventComponentFileCopyFailure,,,,,,The user {{userName}} failed to copy {{SourceFSIDName}}\{{SourceFilePath}} to {{DestinationFSIDName}}\{{DestinationFilePath}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.349,FluidFS-MIB::fluidFSEventComponentLogoffActiveProtocolSessionGeneralSuccess,,,,,,NAS Administrator '{{administrator}}' closed {{ClientProtocol}} connection(s) on {{TenantName}}. Filter details: {{ClientProtocolDetails}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.350,FluidFS-MIB::fluidFSEventComponentCloseOpenFileGeneralSuccess,,,,,,NAS Administrator '{{administrator}}' closed file(s) on {{TenantName}}. Filter details: {{ClientProtocolDetails}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.351,FluidFS-MIB::fluidFSEventComponentFlashClusterSuccessEvent,,,,,,{{userName}} successfully flashed cluster with service pack file {{servicePackFileName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.352,FluidFS-MIB::fluidFSEventComponentFlashClusterFailedEvent,,,,,,{{userName}} failed to flash cluster with service pack file {{servicePackFileName}}. {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.353,FluidFS-MIB::fluidFSEventComponentSmbShareSecurityDescriptorModifySuccess,,,,,,The user {{userName}} modified ACL on the root folder of SMB share {{shareName}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.354,FluidFS-MIB::fluidFSEventComponentRedirectionFolderAddSuccess,,,,,,The user {{userName}} added redirection on the folder {{FolderPath}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.355,FluidFS-MIB::fluidFSEventComponentRedirectionFolderModifySuccess,,,,,,The user {{userName}} modified redirection on the folder {{DSIDPath}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.356,FluidFS-MIB::fluidFSEventComponentRedirectionFolderDeleteSuccess,,,,,,The user {{userName}} deleted redirection on the folder {{DSIDPath}} on NAS volume {{FSIDName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.357,FluidFS-MIB::fluidFSEventComponentFtpProtocolModifySuccess,,,,,,The user {{userName}} updated the FTP configuration of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.358,FluidFS-MIB::fluidFSEventComponentReplicationActionModifyBwLimiterSuccess,,,,,,The user {{userName}} has modified the BW limiter for replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} NAS volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.15.359,FluidFS-MIB::fluidFSEventComponentGpoModifySuccess,,,,,,GPO configuration of {{TenantName}} was modified successfully Description: The user {{userName}} has successfully modified the GPO configuration of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.360,FluidFS-MIB::fluidFSEventComponentGpoTriggerSuccess,,,,,,Group policy polling was triggered successfully on {{TenantName}} Description: The user {{userName}} has triggered group policy polling successfully on {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.361,FluidFS-MIB::fluidFSEventComponentTenantPublicIPsModifySuccess,,,,,,The user {{userName}} updated the configuration of {{TenantName}} client network Public IPs.
.1.3.6.1.4.1.674.11000.2000.200.20.15.362,FluidFS-MIB::fluidFSEventComponentReplicationActionModifyCompressionAndDedupSuccess,,,,,,The user {{userName}} has modifyed the compression and deduplication mode for replication between {{FSIDName}} and {{remoteVolume}}@{{remoteSystemName}} NAS volumes.
.1.3.6.1.4.1.674.11000.2000.200.20.15.363,FluidFS-MIB::fluidFSEventComponentExampleActionSyncSuccess,,,,,,Example action with sync succeeded.
.1.3.6.1.4.1.674.11000.2000.200.20.15.364,FluidFS-MIB::fluidFSEventComponentExampleActionSyncFailed,,,,,,Failed to perform example action with sync. Error: {{retcodeString}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.365,FluidFS-MIB::fluidFSEventComponentAdminSubnetModifySuccess,,,,,,Management subnet {{networkId}}/{{prefix}} was successfully modified by {{userName}}. State is {{state}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.366,FluidFS-MIB::fluidFSEventComponentTriggerPhoneHomeSuccess,,,,,,The user {{userName}} triggered phone home.
.1.3.6.1.4.1.674.11000.2000.200.20.15.367,FluidFS-MIB::fluidFSEventComponentInterfaceRolesModifySuccess,,,,,,Interface Roles for NAS Appliance {{applianceId}} were successfully modified by user {{userName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.368,FluidFS-MIB::fluidFSEventComponentSmbDiagnosticOk,,,,,,Package generation for 'SMB Diagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.369,FluidFS-MIB::fluidFSEventComponentSmbDiagnosticFailed,,,,,,Failed to generate diagnostics package for 'SMB Diagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.370,FluidFS-MIB::fluidFSEventComponentNfsDiagnosticOk,,,,,,Package generation for 'NFS Diagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.371,FluidFS-MIB::fluidFSEventComponentNfsDiagnosticFailed,,,,,,Failed to generate diagnostics package for 'NFS Diagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.372,FluidFS-MIB::fluidFSEventComponentFtpDiagnosticOk,,,,,,Package generation for 'FTP Diagnostics' completed successfully.
.1.3.6.1.4.1.674.11000.2000.200.20.15.373,FluidFS-MIB::fluidFSEventComponentFtpDiagnosticFailed,,,,,,Failed to generate diagnostics package for 'FTP Diagnostics'. {{retcodeString}}
.1.3.6.1.4.1.674.11000.2000.200.20.15.374,FluidFS-MIB::fluidFSEventComponentActiveDirectorySetKrbCompoundAuthSuccess,,,,,,The user {{userName}} has successfully configured Kerberos Compound Authentication support for the cluster {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.15.375,FluidFS-MIB::fluidFSEventComponentHdfsProtocolModifySuccess,,,,,,The user {{userName}} updated the HDFS configuration of {{TenantName}}.
.1.3.6.1.4.1.674.11000.2000.200.20.16,FluidFS-MIB::fluidFSEventsSupportShell,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.16.4,FluidFS-MIB::fluidFSEventSupportShellSecureConsoleAccessDisabledReservation,,,,,,Secure Console Access on NAS Controller {{node}} cannot be enabled Description: Secure Console Access session on NAS Controller {{node}} had been disconnected from the server side or the system is disabled on the reservation web server
.1.3.6.1.4.1.674.11000.2000.200.20.16.5,FluidFS-MIB::fluidFSEventSupportShellSecureConsoleAccessSshTunnelFailure,,,,,,Secure Console Access failure on NAS Controller {{node}} Description: Secure Console Access session on NAS Controller {{node}} had been disconnected due to SSH tunnel failure
.1.3.6.1.4.1.674.11000.2000.200.20.16.6,FluidFS-MIB::fluidFSEventSupportShellSecureConsoleAccessSessionStartFailed,,,,,,Failed to establish the Secure Console Access session Description: Failed to establish the Secure Console Access session on NAS Controller {{node}} due to error response from the reservation web server
.1.3.6.1.4.1.674.11000.2000.200.20.16.7,FluidFS-MIB::fluidFSEventSupportShellSecureConsoleAccessSessionExpired,,,,,,Secure Console Access session on NAS Controller {{node}} had expired Description: Secure Console Access session on NAS Controller {{node}} had been disconnected due to TTL expiry
.1.3.6.1.4.1.674.11000.2000.200.20.16.8,FluidFS-MIB::fluidFSEventSupportShellSupportShellLogin,,,,,,User logged-in into Support Shell Description: User {{userName}} logged-in into support shell in NAS Controller {{node}}
.1.3.6.1.4.1.674.11000.2000.200.20.16.9,FluidFS-MIB::fluidFSEventSupportShellSupportShellLogout,,,,,,User logged-out from Support Shell Description: User {{userName}} logged-out from support shell in NAS Controller {{node}}
.1.3.6.1.4.1.674.11000.2000.200.20.16.10,FluidFS-MIB::fluidFSEventSupportShellSupportShellCommandInvokation,,,,,,User executed command in Support Shell Description: User {{userName}} executed command {{command}}
.1.3.6.1.4.1.674.11000.2000.200.20.17,FluidFS-MIB::fluidFSEventsAuditing,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.17.23,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditWrite,,,,,,Successful Write by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful write operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.24,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditRead,,,,,,Successful Read by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful read operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.25,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditDelete,,,,,,Successful Delete by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful delete operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.26,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditReadAttr,,,,,,Successful Read Attributes by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful read attributes operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.27,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditWriteAttr,,,,,,Successful Write Attributes by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful write attributes operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.28,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditWriteOwner,,,,,,Successful Change Owner by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful change owner operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.29,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditWriteDACL,,,,,,Successful Change permissions by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful write to DACL operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.30,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditAccessSACL,,,,,,Successful System Security Access by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful access to SACL operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.31,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditReadCtl,,,,,,Successful Read Security Descriptor by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a successful read security descriptor operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.32,FluidFS-MIB::fluidFSEventAuditingFailedAuditWrite,,,,,,Failed Write by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed write operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.33,FluidFS-MIB::fluidFSEventAuditingFailedAuditRead,,,,,,Failed Read by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed read operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.34,FluidFS-MIB::fluidFSEventAuditingFailedAuditDelete,,,,,,Failed Delete by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed delete operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.35,FluidFS-MIB::fluidFSEventAuditingFailedAuditReadAttr,,,,,,Failed Read Attributes by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed read attributes operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.36,FluidFS-MIB::fluidFSEventAuditingFailedAuditWriteAttr,,,,,,Failed Write Attributes by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed write attributes operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.37,FluidFS-MIB::fluidFSEventAuditingFailedAuditWriteOwner,,,,,,Failed Change Owner by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed change owner operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.38,FluidFS-MIB::fluidFSEventAuditingFailedAuditWriteDACL,,,,,,Failed Change permissions by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed write to DACL operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.39,FluidFS-MIB::fluidFSEventAuditingFailedAuditAccessSACL,,,,,,Failed Access to SACL by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed access to SACL operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.40,FluidFS-MIB::fluidFSEventAuditingFailedAuditReadCtl,,,,,,Failed Read Security Descriptor by {{uName}} on {{nName}}/{{dPath}} Description: The User {{uName}} performed a failed read security descriptor operation on file {{nName}}/{{dPath}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.41,FluidFS-MIB::fluidFSEventAuditingFailedAuditDeleteName,,,,,,Failed Delete by {{uName}} on {{nName}}/{{name}} Description: The User {{uName}} performed a failed delete operation on file {{nName}}/{{name}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.17.42,FluidFS-MIB::fluidFSEventAuditingSuccessfulAuditDeleteName,,,,,,Successful Delete by {{uName}} on {{nName}}/{{name}} Description: The User {{uName}} performed a successful delete operation on file {{nName}}/{{name}}. The Desired access mask: {{desiredCifsAccessMaskName}}
.1.3.6.1.4.1.674.11000.2000.200.20.18,FluidFS-MIB::fluidFSEventsUpgrade,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.20.18.1,FluidFS-MIB::fluidFSEventUpgradeFailedToReadFileInformation,,,,,,Fail to read information of file {{servicePackName}} while checking for new service pack. File was removed
.1.3.6.1.4.1.674.11000.2000.200.20.18.2,FluidFS-MIB::fluidFSEventUpgradeFailedToGetFileSize,,,,,,Fail to get size of file {{servicePackName}} while checking for new service pack. File was removed
.1.3.6.1.4.1.674.11000.2000.200.20.18.3,FluidFS-MIB::fluidFSEventUpgradeInvalidFileFormatOrChecksum,,,,,,File {{servicePackName}} is not a valid package for upgrade. File was removed
.1.3.6.1.4.1.674.11000.2000.200.20.18.4,FluidFS-MIB::fluidFSEventUpgradeServicePackIsOlderThanCurrentVersion,,,,,,The service pack {{servicePackName}} was removed because its version is older than current one
.1.3.6.1.4.1.674.11000.2000.200.20.18.5,FluidFS-MIB::fluidFSEventUpgradeServicePackHasOldVersion,,,,,,The service pack {{servicePackName}} was removed because its version is older than available versions on the current node
.1.3.6.1.4.1.674.11000.2000.200.20.18.6,FluidFS-MIB::fluidFSEventUpgradeServicePackAlreadyExists,,,,,,The service pack {{servicePackName}} was removed because file with the same version already exists
.1.3.6.1.4.1.674.11000.2000.200.20.18.7,FluidFS-MIB::fluidFSEventUpgradeMonitoringDataCorruption,,,,,,Failed to recover the monitored data after upgrade because of corruption
.1.3.6.1.4.1.674.11000.2000.200.20.18.8,FluidFS-MIB::fluidFSEventUpgradeServicePackDownloaded,,,,,,New service pack {{servicePackName}} downloaded
.1.3.6.1.4.1.674.11000.2000.200.21,FluidFS-MIB::fluidFSEventsParams,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.1,FluidFS-MIB::fluidFSEventsParamsAdmin,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.1.1,FluidFS-MIB::fluidFSEventsParamsAdminUsername,OCTET,read-only,,current,,User name which performed the operation
.1.3.6.1.4.1.674.11000.2000.200.21.1.2,FluidFS-MIB::fluidFSEventsParamsAdminAdministrator,OCTET,read-only,,current,,System administrator
.1.3.6.1.4.1.674.11000.2000.200.21.1.3,FluidFS-MIB::fluidFSEventsParamsAdminLocaluser,OCTET,read-only,,current,,Local user name
.1.3.6.1.4.1.674.11000.2000.200.21.1.4,FluidFS-MIB::fluidFSEventsParamsAdminLocalgroup,OCTET,read-only,,current,,Local group name
.1.3.6.1.4.1.674.11000.2000.200.21.1.5,FluidFS-MIB::fluidFSEventsParamsAdminTenantId,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.1.6,FluidFS-MIB::fluidFSEventsParamsAdminVirtualVolume,OCTET,read-only,,current,,NAS volume
.1.3.6.1.4.1.674.11000.2000.200.21.1.7,FluidFS-MIB::fluidFSEventsParamsAdminHost,OCTET,read-only,,current,,Antivirus host
.1.3.6.1.4.1.674.11000.2000.200.21.1.8,FluidFS-MIB::fluidFSEventsParamsAdminPort,INTEGER,read-only,,current,,Antivirus port
.1.3.6.1.4.1.674.11000.2000.200.21.1.9,FluidFS-MIB::fluidFSEventsParamsAdminShareName,OCTET,read-only,,current,,SMB share name
.1.3.6.1.4.1.674.11000.2000.200.21.1.10,FluidFS-MIB::fluidFSEventsParamsAdminNodeId,INTEGER,read-only,,current,,Node id
.1.3.6.1.4.1.674.11000.2000.200.21.1.11,FluidFS-MIB::fluidFSEventsParamsAdminPid,INTEGER,read-only,,current,,Process id
.1.3.6.1.4.1.674.11000.2000.200.21.1.12,FluidFS-MIB::fluidFSEventsParamsAdminVirtualInterface,OCTET,read-only,,current,,Virtual interface
.1.3.6.1.4.1.674.11000.2000.200.21.1.13,FluidFS-MIB::fluidFSEventsParamsAdminClusterName,OCTET,read-only,,current,,Cluster name
.1.3.6.1.4.1.674.11000.2000.200.21.1.14,FluidFS-MIB::fluidFSEventsParamsAdminSnapshotName,OCTET,read-only,,current,,Snapshot name
.1.3.6.1.4.1.674.11000.2000.200.21.1.15,FluidFS-MIB::fluidFSEventsParamsAdminNewSnapshotName,OCTET,read-only,,current,,New snapshot name
.1.3.6.1.4.1.674.11000.2000.200.21.1.16,FluidFS-MIB::fluidFSEventsParamsAdminStaticRoutes,OCTET,read-only,,current,,Static routes list
.1.3.6.1.4.1.674.11000.2000.200.21.1.17,FluidFS-MIB::fluidFSEventsParamsAdminNFSExportPath,OCTET,read-only,,current,,Path of NFS export
.1.3.6.1.4.1.674.11000.2000.200.21.1.18,FluidFS-MIB::fluidFSEventsParamsAdminQuotaUserName,OCTET,read-only,,current,,User name on which the quota is defined
.1.3.6.1.4.1.674.11000.2000.200.21.1.19,FluidFS-MIB::fluidFSEventsParamsAdminQuotaGroupName,OCTET,read-only,,current,,Group name on which the quota is defined
.1.3.6.1.4.1.674.11000.2000.200.21.1.20,FluidFS-MIB::fluidFSEventsParamsAdminFileLevelReplicationSchedule,OCTET,read-only,,current,,Scheduling configuration of file level replication
.1.3.6.1.4.1.674.11000.2000.200.21.1.21,FluidFS-MIB::fluidFSEventsParamsAdminReplicationSource,OCTET,read-only,,current,,Source volume of block level replication (volume@cluster)
.1.3.6.1.4.1.674.11000.2000.200.21.1.22,FluidFS-MIB::fluidFSEventsParamsAdminReplicationDestination,OCTET,read-only,,current,,Destination volume of block level replication (volume@cluster)
.1.3.6.1.4.1.674.11000.2000.200.21.1.23,FluidFS-MIB::fluidFSEventsParamsAdminReplicationSourceVolume,OCTET,read-only,,current,,Source volume of block level replication
.1.3.6.1.4.1.674.11000.2000.200.21.1.24,FluidFS-MIB::fluidFSEventsParamsAdminReplicationDestinationVolume,OCTET,read-only,,current,,Destination volume of block level replication
.1.3.6.1.4.1.674.11000.2000.200.21.1.25,FluidFS-MIB::fluidFSEventsParamsAdminReplicationDestinationCluster,OCTET,read-only,,current,,Destination cluster of block level replication
.1.3.6.1.4.1.674.11000.2000.200.21.1.26,FluidFS-MIB::fluidFSEventsParamsAdminFileLevelReplicationTask,OCTET,read-only,,current,,Task name of file level replication
.1.3.6.1.4.1.674.11000.2000.200.21.1.27,FluidFS-MIB::fluidFSEventsParamsAdminTrustedCluster,OCTET,read-only,,current,,Trusted cluster name
.1.3.6.1.4.1.674.11000.2000.200.21.1.28,FluidFS-MIB::fluidFSEventsParamsAdminPackageName,OCTET,read-only,,current,,Package name
.1.3.6.1.4.1.674.11000.2000.200.21.1.29,FluidFS-MIB::fluidFSEventsParamsAdminCIFSShareNames,OCTET,read-only,,current,,CIFSShareNames
.1.3.6.1.4.1.674.11000.2000.200.21.1.30,FluidFS-MIB::fluidFSEventsParamsAdminSubnetName,OCTET,read-only,,current,,Subnet name
.1.3.6.1.4.1.674.11000.2000.200.21.1.31,FluidFS-MIB::fluidFSEventsParamsAdminSrcUsername,OCTET,read-only,,current,,Source user for user mapping
.1.3.6.1.4.1.674.11000.2000.200.21.1.32,FluidFS-MIB::fluidFSEventsParamsAdminDstUsername,OCTET,read-only,,current,,Destination user for user mapping
.1.3.6.1.4.1.674.11000.2000.200.21.1.33,FluidFS-MIB::fluidFSEventsParamsAdminGuestAccountUsername,OCTET,read-only,,current,,Protocols guest account
.1.3.6.1.4.1.674.11000.2000.200.21.1.34,FluidFS-MIB::fluidFSEventsParamsAdminUsersRepositoryType,OCTET,read-only,,current,,Users repository type (Windows/Unix...)
.1.3.6.1.4.1.674.11000.2000.200.21.1.35,FluidFS-MIB::fluidFSEventsParamsAdminComponent,OCTET,read-only,,current,,The API component
.1.3.6.1.4.1.674.11000.2000.200.21.1.36,FluidFS-MIB::fluidFSEventsParamsAdminArgsList,OCTET,read-only,,current,,The input arguments
.1.3.6.1.4.1.674.11000.2000.200.21.1.37,FluidFS-MIB::fluidFSEventsParamsAdminNodeIdEven,OCTET,read-only,,current,,Even Controller id
.1.3.6.1.4.1.674.11000.2000.200.21.1.38,FluidFS-MIB::fluidFSEventsParamsAdminNodeIdOdd,OCTET,read-only,,current,,Odd Controller id
.1.3.6.1.4.1.674.11000.2000.200.21.1.39,FluidFS-MIB::fluidFSEventsParamsAdminNewSize,OCTET,read-only,,current,,Size being added to the FS (GB)
.1.3.6.1.4.1.674.11000.2000.200.21.1.40,FluidFS-MIB::fluidFSEventsParamsAdminLunsList,OCTET,read-only,,current,,List of LUN id's
.1.3.6.1.4.1.674.11000.2000.200.21.1.41,FluidFS-MIB::fluidFSEventsParamsAdminSpVersion,OCTET,read-only,,current,,SP Version
.1.3.6.1.4.1.674.11000.2000.200.21.1.42,FluidFS-MIB::fluidFSEventsParamsAdminUnsignedNodeId,OCTET,read-only,,current,,Node id
.1.3.6.1.4.1.674.11000.2000.200.21.1.43,FluidFS-MIB::fluidFSEventsParamsAdminOldSize,OCTET,read-only,,current,,Current size of the FS (GB)
.1.3.6.1.4.1.674.11000.2000.200.21.1.44,FluidFS-MIB::fluidFSEventsParamsAdminSpError,OCTET,read-only,,current,,SP Error reason
.1.3.6.1.4.1.674.11000.2000.200.21.1.45,FluidFS-MIB::fluidFSEventsParamsAdminGeneralEventText,OCTET,read-only,,current,,A general free text parameter, that can be sent to EQL which does not support it yet
.1.3.6.1.4.1.674.11000.2000.200.21.1.46,FluidFS-MIB::fluidFSEventsParamsAdminNewAtimeValue,OCTET,read-only,,current,,New value of atime granularity
.1.3.6.1.4.1.674.11000.2000.200.21.1.47,FluidFS-MIB::fluidFSEventsParamsAdminDiagnosticName,OCTET,read-only,,current,,The diagnostic name
.1.3.6.1.4.1.674.11000.2000.200.21.1.48,FluidFS-MIB::fluidFSEventsParamsAdminWWNPort1,OCTET,read-only,,current,,WWN Port1
.1.3.6.1.4.1.674.11000.2000.200.21.1.49,FluidFS-MIB::fluidFSEventsParamsAdminWWNPort2,OCTET,read-only,,current,,WWN Port2
.1.3.6.1.4.1.674.11000.2000.200.21.1.50,FluidFS-MIB::fluidFSEventsParamsAdminNumLuns,OCTET,read-only,,current,,Number of LUNs added to the FS
.1.3.6.1.4.1.674.11000.2000.200.21.1.51,FluidFS-MIB::fluidFSEventsParamsAdminUi,OCTET,read-only,,current,,The interface name
.1.3.6.1.4.1.674.11000.2000.200.21.1.52,FluidFS-MIB::fluidFSEventsParamsAdminErrCode,INTEGER,read-only,,current,,Internal code of error
.1.3.6.1.4.1.674.11000.2000.200.21.1.53,FluidFS-MIB::fluidFSEventsParamsAdminControllerId,OCTET,read-only,,current,,Controller ID
.1.3.6.1.4.1.674.11000.2000.200.21.1.54,FluidFS-MIB::fluidFSEventsParamsAdminApplianceId,OCTET,read-only,,current,,NAS appliance ID
.1.3.6.1.4.1.674.11000.2000.200.21.1.55,FluidFS-MIB::fluidFSEventsParamsAdminApplianceServiceTag,OCTET,read-only,,current,,NAS appliance service tag
.1.3.6.1.4.1.674.11000.2000.200.21.1.56,FluidFS-MIB::fluidFSEventsParamsAdminEscalationPeriodInMinutes,OCTET,read-only,,current,,Escalation Expiration Period (Minutes)
.1.3.6.1.4.1.674.11000.2000.200.21.1.57,FluidFS-MIB::fluidFSEventsParamsAdminObjectName,OCTET,read-only,,current,,Name of the configuration object
.1.3.6.1.4.1.674.11000.2000.200.21.1.58,FluidFS-MIB::fluidFSEventsParamsAdminRecommendedMaxCount,INTEGER,read-only,,current,,recommended maximum amount of the configuration object
.1.3.6.1.4.1.674.11000.2000.200.21.1.59,FluidFS-MIB::fluidFSEventsParamsAdminFSID,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.1.60,FluidFS-MIB::fluidFSEventsParamsAdminTenantName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.1.61,FluidFS-MIB::fluidFSEventsParamsAdminVolumeName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2,FluidFS-MIB::fluidFSEventsParamsHardware,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.1,FluidFS-MIB::fluidFSEventsParamsHardwareNodeName,OCTET,read-only,,current,,Controller name
.1.3.6.1.4.1.674.11000.2000.200.21.2.2,FluidFS-MIB::fluidFSEventsParamsHardwareNetworkId,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.3,FluidFS-MIB::fluidFSEventsParamsHardwarePrefix,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.4,FluidFS-MIB::fluidFSEventsParamsHardwareCpuName,OCTET,read-only,,current,,CPU name in the controller
.1.3.6.1.4.1.674.11000.2000.200.21.2.5,FluidFS-MIB::fluidFSEventsParamsHardwareCpuTemperature,OCTET,read-only,,current,,CPU temprature
.1.3.6.1.4.1.674.11000.2000.200.21.2.6,FluidFS-MIB::fluidFSEventsParamsHardwareVlanTag,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.7,FluidFS-MIB::fluidFSEventsParamsHardwareDestinationNetwork,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.8,FluidFS-MIB::fluidFSEventsParamsHardwareCpuSpeed,INTEGER,read-only,,current,,CPU speed
.1.3.6.1.4.1.674.11000.2000.200.21.2.9,FluidFS-MIB::fluidFSEventsParamsHardwareAverageSpeed,INTEGER,read-only,,current,,Average CPU speed
.1.3.6.1.4.1.674.11000.2000.200.21.2.10,FluidFS-MIB::fluidFSEventsParamsHardwareNodeId,INTEGER,read-only,,current,,Controller id
.1.3.6.1.4.1.674.11000.2000.200.21.2.11,FluidFS-MIB::fluidFSEventsParamsHardwareNetworkName,OCTET,read-only,,current,,Network name
.1.3.6.1.4.1.674.11000.2000.200.21.2.12,FluidFS-MIB::fluidFSEventsParamsHardwarePacketLoss,INTEGER,read-only,,current,,Packet loss percentage
.1.3.6.1.4.1.674.11000.2000.200.21.2.13,FluidFS-MIB::fluidFSEventsParamsHardwareEthName,OCTET,read-only,,current,,Eth name
.1.3.6.1.4.1.674.11000.2000.200.21.2.14,FluidFS-MIB::fluidFSEventsParamsHardwareLunId,OCTET,read-only,,current,,LUN SCSI ID
.1.3.6.1.4.1.674.11000.2000.200.21.2.15,FluidFS-MIB::fluidFSEventsParamsHardwareFromNode,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.16,FluidFS-MIB::fluidFSEventsParamsHardwareToNode,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.17,FluidFS-MIB::fluidFSEventsParamsHardwareFromEth,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.18,FluidFS-MIB::fluidFSEventsParamsHardwareToEth,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.19,FluidFS-MIB::fluidFSEventsParamsHardwareTapeName,OCTET,read-only,,current,,Tape device name
.1.3.6.1.4.1.674.11000.2000.200.21.2.20,FluidFS-MIB::fluidFSEventsParamsHardwareBatteryPercentage,INTEGER,read-only,,current,,BPS battery percentage
.1.3.6.1.4.1.674.11000.2000.200.21.2.21,FluidFS-MIB::fluidFSEventsParamsHardwareBatteryRemainTime,INTEGER,read-only,,current,,BPS battery remaining time
.1.3.6.1.4.1.674.11000.2000.200.21.2.22,FluidFS-MIB::fluidFSEventsParamsHardwareSubnetName,OCTET,read-only,,current,,Subnet name
.1.3.6.1.4.1.674.11000.2000.200.21.2.23,FluidFS-MIB::fluidFSEventsParamsHardwareHostName,OCTET,read-only,,current,,Host name
.1.3.6.1.4.1.674.11000.2000.200.21.2.24,FluidFS-MIB::fluidFSEventsParamsHardwareBatteryLastReplace,INTEGER,read-only,,current,,Battery Last Replace
.1.3.6.1.4.1.674.11000.2000.200.21.2.25,FluidFS-MIB::fluidFSEventsParamsHardwareDeviceTypeName,OCTET,read-only,,current,,Device Type Name
.1.3.6.1.4.1.674.11000.2000.200.21.2.26,FluidFS-MIB::fluidFSEventsParamsHardwareDeviceName,OCTET,read-only,,current,,Device Name
.1.3.6.1.4.1.674.11000.2000.200.21.2.27,FluidFS-MIB::fluidFSEventsParamsHardwareTemperature,INTEGER,read-only,,current,,Temperature
.1.3.6.1.4.1.674.11000.2000.200.21.2.28,FluidFS-MIB::fluidFSEventsParamsHardwareMeltingDistance,INTEGER,read-only,,current,,Melting Distance
.1.3.6.1.4.1.674.11000.2000.200.21.2.29,FluidFS-MIB::fluidFSEventsParamsHardwareDeviceState,OCTET,read-only,,current,,Device State
.1.3.6.1.4.1.674.11000.2000.200.21.2.30,FluidFS-MIB::fluidFSEventsParamsHardwareFirstNodeId,INTEGER,read-only,,current,,First Controller ID
.1.3.6.1.4.1.674.11000.2000.200.21.2.31,FluidFS-MIB::fluidFSEventsParamsHardwareSecondNodeId,INTEGER,read-only,,current,,Second Controller ID
.1.3.6.1.4.1.674.11000.2000.200.21.2.32,FluidFS-MIB::fluidFSEventsParamsHardwareBondName,OCTET,read-only,,current,,Bond Name
.1.3.6.1.4.1.674.11000.2000.200.21.2.33,FluidFS-MIB::fluidFSEventsParamsHardwareBandwidth,INTEGER,read-only,,current,,Bandwidth
.1.3.6.1.4.1.674.11000.2000.200.21.2.34,FluidFS-MIB::fluidFSEventsParamsHardwareDiskName,OCTET,read-only,,current,,Local disk name
.1.3.6.1.4.1.674.11000.2000.200.21.2.35,FluidFS-MIB::fluidFSEventsParamsHardwareMemoryFirstNode,OCTET,read-only,,current,,Memory on first controller
.1.3.6.1.4.1.674.11000.2000.200.21.2.36,FluidFS-MIB::fluidFSEventsParamsHardwareMemorySecondNode,OCTET,read-only,,current,,Memory on second controller
.1.3.6.1.4.1.674.11000.2000.200.21.2.37,FluidFS-MIB::fluidFSEventsParamsHardwareActualMtu,INTEGER,read-only,,current,,Actual MTU
.1.3.6.1.4.1.674.11000.2000.200.21.2.38,FluidFS-MIB::fluidFSEventsParamsHardwareOptimalMtu,INTEGER,read-only,,current,,Optimal Mtu
.1.3.6.1.4.1.674.11000.2000.200.21.2.39,FluidFS-MIB::fluidFSEventsParamsHardwareBpsLogInfo,OCTET,read-only,,current,,Bps Log Info
.1.3.6.1.4.1.674.11000.2000.200.21.2.40,FluidFS-MIB::fluidFSEventsParamsHardwareBpsAlarm,OCTET,read-only,,current,,BPS Alarm message
.1.3.6.1.4.1.674.11000.2000.200.21.2.41,FluidFS-MIB::fluidFSEventsParamsHardwarePowerSuppliesRedundancyStatus,OCTET,read-only,,current,,power supplies redundancy status
.1.3.6.1.4.1.674.11000.2000.200.21.2.42,FluidFS-MIB::fluidFSEventsParamsHardwarePowerSuppliesElementStatus,OCTET,read-only,,current,,power supplies element status
.1.3.6.1.4.1.674.11000.2000.200.21.2.43,FluidFS-MIB::fluidFSEventsParamsHardwarePowerSuppliesElementLocation,OCTET,read-only,,current,,power supplies element location
.1.3.6.1.4.1.674.11000.2000.200.21.2.44,FluidFS-MIB::fluidFSEventsParamsHardwarePowerSuppliesElementsCount,INTEGER,read-only,,current,,The number of power supplies elements
.1.3.6.1.4.1.674.11000.2000.200.21.2.45,FluidFS-MIB::fluidFSEventsParamsHardwareChassisID,OCTET,read-only,,current,,Appliance chassis ID
.1.3.6.1.4.1.674.11000.2000.200.21.2.46,FluidFS-MIB::fluidFSEventsParamsHardwareTemperatureSensorName,OCTET,read-only,,current,,Temperature sensor name
.1.3.6.1.4.1.674.11000.2000.200.21.2.47,FluidFS-MIB::fluidFSEventsParamsHardwareTemperatureSensorStatus,OCTET,read-only,,current,,Temperature sensor status
.1.3.6.1.4.1.674.11000.2000.200.21.2.48,FluidFS-MIB::fluidFSEventsParamsHardwareTemperatureSensorValue,INTEGER,read-only,,current,,Temperature sensor value
.1.3.6.1.4.1.674.11000.2000.200.21.2.49,FluidFS-MIB::fluidFSEventsParamsHardwareTemperatureSensorErrorThreshold,INTEGER,read-only,,current,,Temperature sensor error threshold
.1.3.6.1.4.1.674.11000.2000.200.21.2.50,FluidFS-MIB::fluidFSEventsParamsHardwareTemperatureSensorWarningThreshold,INTEGER,read-only,,current,,Temperature sensor warning threshold
.1.3.6.1.4.1.674.11000.2000.200.21.2.51,FluidFS-MIB::fluidFSEventsParamsHardwarePowerSupplyName,OCTET,read-only,,current,,Power supply name
.1.3.6.1.4.1.674.11000.2000.200.21.2.52,FluidFS-MIB::fluidFSEventsParamsHardwarePowerSupplyStatus,OCTET,read-only,,current,,Power supply status
.1.3.6.1.4.1.674.11000.2000.200.21.2.53,FluidFS-MIB::fluidFSEventsParamsHardwareBpsName,OCTET,read-only,,current,,BPS name
.1.3.6.1.4.1.674.11000.2000.200.21.2.54,FluidFS-MIB::fluidFSEventsParamsHardwareBpsStatus,OCTET,read-only,,current,,BPS status
.1.3.6.1.4.1.674.11000.2000.200.21.2.55,FluidFS-MIB::fluidFSEventsParamsHardwareBpsBatteryRuntime,INTEGER,read-only,,current,,BPS battery runtime
.1.3.6.1.4.1.674.11000.2000.200.21.2.56,FluidFS-MIB::fluidFSEventsParamsHardwareBpsBatteryCharge,INTEGER,read-only,,current,,BPS battery charge
.1.3.6.1.4.1.674.11000.2000.200.21.2.57,FluidFS-MIB::fluidFSEventsParamsHardwareComponentIndex,INTEGER,read-only,,current,,Component index in group of components
.1.3.6.1.4.1.674.11000.2000.200.21.2.58,FluidFS-MIB::fluidFSEventsParamsHardwareChassisId,OCTET,read-only,,current,,deprecated - a duplication of above parameter chassisID
.1.3.6.1.4.1.674.11000.2000.200.21.2.59,FluidFS-MIB::fluidFSEventsParamsHardwareApplianceServiceTag,OCTET,read-only,,current,,Appliance service tag
.1.3.6.1.4.1.674.11000.2000.200.21.2.60,FluidFS-MIB::fluidFSEventsParamsHardwareApplianceId,INTEGER,read-only,,current,,Appliance index
.1.3.6.1.4.1.674.11000.2000.200.21.2.61,FluidFS-MIB::fluidFSEventsParamsHardwareFcHbaName,OCTET,read-only,,current,,Fibre channel HBA port name
.1.3.6.1.4.1.674.11000.2000.200.21.2.62,FluidFS-MIB::fluidFSEventsParamsHardwareComponentName,OCTET,read-only,,current,,Component name in group of components
.1.3.6.1.4.1.674.11000.2000.200.21.2.63,FluidFS-MIB::fluidFSEventsParamsHardwareContextBasedServiceTag,OCTET,read-only,,current,,Contrller or appliance service tag
.1.3.6.1.4.1.674.11000.2000.200.21.2.64,FluidFS-MIB::fluidFSEventsParamsHardwareTargetEthName,OCTET,read-only,,current,,Target eth name in mesh connectivity monitoring
.1.3.6.1.4.1.674.11000.2000.200.21.2.65,FluidFS-MIB::fluidFSEventsParamsHardwareIp,OCTET,read-only,,current,,Monitored external server ip
.1.3.6.1.4.1.674.11000.2000.200.21.2.66,FluidFS-MIB::fluidFSEventsParamsHardwareExtSrvType,OCTET,read-only,,current,,Monitored external server ip
.1.3.6.1.4.1.674.11000.2000.200.21.2.67,FluidFS-MIB::fluidFSEventsParamsHardwareDiskModel,OCTET,read-only,,current,,Local disk model name
.1.3.6.1.4.1.674.11000.2000.200.21.2.68,FluidFS-MIB::fluidFSEventsParamsHardwareDiskSerial,OCTET,read-only,,current,,Local disk serial number
.1.3.6.1.4.1.674.11000.2000.200.21.2.69,FluidFS-MIB::fluidFSEventsParamsHardwareDiskOverallReads,OCTET,read-only,,current,,Disk overall reads in MB
.1.3.6.1.4.1.674.11000.2000.200.21.2.70,FluidFS-MIB::fluidFSEventsParamsHardwareDiskOverallWrites,OCTET,read-only,,current,,Disk overall writes in MB
.1.3.6.1.4.1.674.11000.2000.200.21.2.71,FluidFS-MIB::fluidFSEventsParamsHardwareBadSectorsCount,OCTET,read-only,,current,,HDD bad sectors count
.1.3.6.1.4.1.674.11000.2000.200.21.2.72,FluidFS-MIB::fluidFSEventsParamsHardwareFailedWritesCount,OCTET,read-only,,current,,SSD failed writes count
.1.3.6.1.4.1.674.11000.2000.200.21.2.73,FluidFS-MIB::fluidFSEventsParamsHardwareSupportedModels,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.74,FluidFS-MIB::fluidFSEventsParamsHardwareId,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.2.75,FluidFS-MIB::fluidFSEventsParamsHardwarePciSlot,INTEGER,read-only,,current,,Slot number
.1.3.6.1.4.1.674.11000.2000.200.21.2.76,FluidFS-MIB::fluidFSEventsParamsHardwarePciCard,OCTET,read-only,,current,,Full description of a PCI card
.1.3.6.1.4.1.674.11000.2000.200.21.3,FluidFS-MIB::fluidFSEventsParamsNdmp,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.3.1,FluidFS-MIB::fluidFSEventsParamsNdmpSessionId,INTEGER,read-only,,current,,NDMP job session id
.1.3.6.1.4.1.674.11000.2000.200.21.3.2,FluidFS-MIB::fluidFSEventsParamsNdmpJobType,OCTET,read-only,,current,,NDMP job type (backup/restore)
.1.3.6.1.4.1.674.11000.2000.200.21.3.3,FluidFS-MIB::fluidFSEventsParamsNdmpPath,OCTET,read-only,,current,,Target path
.1.3.6.1.4.1.674.11000.2000.200.21.3.4,FluidFS-MIB::fluidFSEventsParamsNdmpStartTimestamp,OCTET,read-only,,current,,NDMP session start timestamp
.1.3.6.1.4.1.674.11000.2000.200.21.3.5,FluidFS-MIB::fluidFSEventsParamsNdmpInitiatorDMAServer,OCTET,read-only,,current,,DMA server that initiated the session
.1.3.6.1.4.1.674.11000.2000.200.21.3.6,FluidFS-MIB::fluidFSEventsParamsNdmpExecutedOnNode,INTEGER,read-only,,current,,Node that executes the job
.1.3.6.1.4.1.674.11000.2000.200.21.3.7,FluidFS-MIB::fluidFSEventsParamsNdmpNDMPMessage,OCTET,read-only,,current,,Event message sent from NDMP
.1.3.6.1.4.1.674.11000.2000.200.21.3.8,FluidFS-MIB::fluidFSEventsParamsNdmpDetail,OCTET,read-only,,current,,Event message sent from NDMP
.1.3.6.1.4.1.674.11000.2000.200.21.4,FluidFS-MIB::fluidFSEventsParamsQuota,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.4.1,FluidFS-MIB::fluidFSEventsParamsQuotaVirtualVolume,OCTET,read-only,,current,,NAS volume FSID
.1.3.6.1.4.1.674.11000.2000.200.21.4.2,FluidFS-MIB::fluidFSEventsParamsQuotaUserName,OCTET,read-only,,current,,User name
.1.3.6.1.4.1.674.11000.2000.200.21.4.3,FluidFS-MIB::fluidFSEventsParamsQuotaGroupName,OCTET,read-only,,current,,Group name
.1.3.6.1.4.1.674.11000.2000.200.21.4.4,FluidFS-MIB::fluidFSEventsParamsQuotaVolumeSize,OCTET,read-only,,current,,Volume size
.1.3.6.1.4.1.674.11000.2000.200.21.4.5,FluidFS-MIB::fluidFSEventsParamsQuotaVolumeSpaceThreshold,OCTET,read-only,,current,,Volume space threshold
.1.3.6.1.4.1.674.11000.2000.200.21.4.6,FluidFS-MIB::fluidFSEventsParamsQuotaSnapshotsSpaceThreshold,OCTET,read-only,,current,,Snapshots space threshold
.1.3.6.1.4.1.674.11000.2000.200.21.4.7,FluidFS-MIB::fluidFSEventsParamsQuotaQuotaThreshold,OCTET,read-only,,current,,Quota threshold for user or group
.1.3.6.1.4.1.674.11000.2000.200.21.4.8,FluidFS-MIB::fluidFSEventsParamsQuotaVolumeFreeSpace,OCTET,read-only,,current,,Volume free space
.1.3.6.1.4.1.674.11000.2000.200.21.4.9,FluidFS-MIB::fluidFSEventsParamsQuotaSystemCapacity,OCTET,read-only,,current,,Capacity of the system
.1.3.6.1.4.1.674.11000.2000.200.21.4.10,FluidFS-MIB::fluidFSEventsParamsQuotaSystemThreshold,OCTET,read-only,,current,,System threshold
.1.3.6.1.4.1.674.11000.2000.200.21.4.11,FluidFS-MIB::fluidFSEventsParamsQuotaQuotaDirPath,OCTET,read-only,,current,,The path of the Directory Quota
.1.3.6.1.4.1.674.11000.2000.200.21.4.13,FluidFS-MIB::fluidFSEventsParamsQuotaVirtualVolumeName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.4.14,FluidFS-MIB::fluidFSEventsParamsQuotaUserNameName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.4.15,FluidFS-MIB::fluidFSEventsParamsQuotaGroupNameName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.5,FluidFS-MIB::fluidFSEventsParamsReplication,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.5.1,FluidFS-MIB::fluidFSEventsParamsReplicationSourceVolume,OCTET,read-only,,current,,Source NAS volume FSID
.1.3.6.1.4.1.674.11000.2000.200.21.5.2,FluidFS-MIB::fluidFSEventsParamsReplicationSourceCluster,OCTET,read-only,,current,,Source cluster
.1.3.6.1.4.1.674.11000.2000.200.21.5.3,FluidFS-MIB::fluidFSEventsParamsReplicationDestinationVolume,OCTET,read-only,,current,,Destination NAS volume
.1.3.6.1.4.1.674.11000.2000.200.21.5.4,FluidFS-MIB::fluidFSEventsParamsReplicationDestinationCluster,OCTET,read-only,,current,,Destination cluster
.1.3.6.1.4.1.674.11000.2000.200.21.5.5,FluidFS-MIB::fluidFSEventsParamsReplicationErrorCode,INTEGER,read-only,,current,,Error code
.1.3.6.1.4.1.674.11000.2000.200.21.5.6,FluidFS-MIB::fluidFSEventsParamsReplicationTaskName,OCTET,read-only,,current,,Task name of file level replication
.1.3.6.1.4.1.674.11000.2000.200.21.5.7,FluidFS-MIB::fluidFSEventsParamsReplicationErrorDesc,OCTET,read-only,,current,,Error description
.1.3.6.1.4.1.674.11000.2000.200.21.5.8,FluidFS-MIB::fluidFSEventsParamsReplicationOldMngConVip,OCTET,read-only,,current,,Old manage console VIP
.1.3.6.1.4.1.674.11000.2000.200.21.5.9,FluidFS-MIB::fluidFSEventsParamsReplicationNewMngConVip,OCTET,read-only,,current,,New manage console VIP
.1.3.6.1.4.1.674.11000.2000.200.21.5.10,FluidFS-MIB::fluidFSEventsParamsReplicationStartTime,OCTET,read-only,,current,,replication start time
.1.3.6.1.4.1.674.11000.2000.200.21.5.11,FluidFS-MIB::fluidFSEventsParamsReplicationEndTime,OCTET,read-only,,current,,replication end time
.1.3.6.1.4.1.674.11000.2000.200.21.5.12,FluidFS-MIB::fluidFSEventsParamsReplicationTotalTransferredSize,OCTET,read-only,,current,,total transferred size
.1.3.6.1.4.1.674.11000.2000.200.21.5.13,FluidFS-MIB::fluidFSEventsParamsReplicationRehydratedVolumeSize,OCTET,read-only,,current,,rehydrated volume size
.1.3.6.1.4.1.674.11000.2000.200.21.5.16,FluidFS-MIB::fluidFSEventsParamsReplicationDomainId,OCTET,read-only,,current,,domain Id
.1.3.6.1.4.1.674.11000.2000.200.21.5.17,FluidFS-MIB::fluidFSEventsParamsReplicationSnapshotId,OCTET,read-only,,current,,snapshot Id
.1.3.6.1.4.1.674.11000.2000.200.21.5.18,FluidFS-MIB::fluidFSEventsParamsReplicationDomainReplicationStats,OCTET,read-only,,current,,domain replication stats
.1.3.6.1.4.1.674.11000.2000.200.21.5.19,FluidFS-MIB::fluidFSEventsParamsReplicationSavingsPercent,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.5.20,FluidFS-MIB::fluidFSEventsParamsReplicationSourceVolumeName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.5.21,FluidFS-MIB::fluidFSEventsParamsReplicationDestinationVolumeName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.7,FluidFS-MIB::fluidFSEventsParamsSnapshot,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.7.1,FluidFS-MIB::fluidFSEventsParamsSnapshotSnapshotName,OCTET,read-only,,current,,Snapshot name
.1.3.6.1.4.1.674.11000.2000.200.21.7.2,FluidFS-MIB::fluidFSEventsParamsSnapshotVolumeName,OCTET,read-only,,current,,Volume name
.1.3.6.1.4.1.674.11000.2000.200.21.7.3,FluidFS-MIB::fluidFSEventsParamsSnapshotFSID,INTEGER,read-only,,current,,NAS volume id
.1.3.6.1.4.1.674.11000.2000.200.21.7.4,FluidFS-MIB::fluidFSEventsParamsSnapshotOutputFileName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.7.5,FluidFS-MIB::fluidFSEventsParamsSnapshotOutputFSID,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.7.6,FluidFS-MIB::fluidFSEventsParamsSnapshotOutputPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.7.7,FluidFS-MIB::fluidFSEventsParamsSnapshotFSIDName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.7.8,FluidFS-MIB::fluidFSEventsParamsSnapshotOutputFSIDName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9,FluidFS-MIB::fluidFSEventsParamsHealth,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.1,FluidFS-MIB::fluidFSEventsParamsHealthPercentOfUsedSpace,OCTET,read-only,,current,,Percentage of system used space
.1.3.6.1.4.1.674.11000.2000.200.21.9.2,FluidFS-MIB::fluidFSEventsParamsHealthNodeName,OCTET,read-only,,current,,Node name
.1.3.6.1.4.1.674.11000.2000.200.21.9.3,FluidFS-MIB::fluidFSEventsParamsHealthService,OCTET,read-only,,current,,Service name
.1.3.6.1.4.1.674.11000.2000.200.21.9.4,FluidFS-MIB::fluidFSEventsParamsHealthPartitionName,OCTET,read-only,,current,,Local partition name
.1.3.6.1.4.1.674.11000.2000.200.21.9.5,FluidFS-MIB::fluidFSEventsParamsHealthPercentOfUsedSwap,INTEGER,read-only,,current,,Percent of used swap memory
.1.3.6.1.4.1.674.11000.2000.200.21.9.6,FluidFS-MIB::fluidFSEventsParamsHealthNodeIds,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.7,FluidFS-MIB::fluidFSEventsParamsHealthPercentOfUsedFileDescriptors,INTEGER,read-only,,current,,Percent of used file descriptors
.1.3.6.1.4.1.674.11000.2000.200.21.9.8,FluidFS-MIB::fluidFSEventsParamsHealthThisNodeId,OCTET,read-only,,current,,Node id of the current node
.1.3.6.1.4.1.674.11000.2000.200.21.9.9,FluidFS-MIB::fluidFSEventsParamsHealthPeerNodeId,OCTET,read-only,,current,,Node id of the peer node
.1.3.6.1.4.1.674.11000.2000.200.21.9.10,FluidFS-MIB::fluidFSEventsParamsHealthVirtualVolume,OCTET,read-only,,current,,NAS volume name
.1.3.6.1.4.1.674.11000.2000.200.21.9.11,FluidFS-MIB::fluidFSEventsParamsHealthFSID,INTEGER,read-only,,current,,NAS volume id
.1.3.6.1.4.1.674.11000.2000.200.21.9.12,FluidFS-MIB::fluidFSEventsParamsHealthMinFreeSpaceInBytes,INTEGER,read-only,,current,,Free space in bytes
.1.3.6.1.4.1.674.11000.2000.200.21.9.13,FluidFS-MIB::fluidFSEventsParamsHealthModuleName,OCTET,read-only,,current,,The BMR module name
.1.3.6.1.4.1.674.11000.2000.200.21.9.14,FluidFS-MIB::fluidFSEventsParamsHealthNumberOfClients,INTEGER,read-only,,current,,Number of clients
.1.3.6.1.4.1.674.11000.2000.200.21.9.15,FluidFS-MIB::fluidFSEventsParamsHealthDomainId,INTEGER,read-only,,current,,Id of the domain from which the event was raised
.1.3.6.1.4.1.674.11000.2000.200.21.9.16,FluidFS-MIB::fluidFSEventsParamsHealthServiceName,OCTET,read-only,,current,,The name of the service
.1.3.6.1.4.1.674.11000.2000.200.21.9.17,FluidFS-MIB::fluidFSEventsParamsHealthSynchronizedServiceName,OCTET,read-only,,current,,The name of the service being synchronized
.1.3.6.1.4.1.674.11000.2000.200.21.9.18,FluidFS-MIB::fluidFSEventsParamsHealthTimeout,INTEGER,read-only,,current,,The timeout in minutes
.1.3.6.1.4.1.674.11000.2000.200.21.9.19,FluidFS-MIB::fluidFSEventsParamsHealthStorageId,INTEGER,read-only,,current,,Internal id of a storage
.1.3.6.1.4.1.674.11000.2000.200.21.9.20,FluidFS-MIB::fluidFSEventsParamsHealthSynchronizedStorageId,INTEGER,read-only,,current,,Internal id of a storage being synchronized
.1.3.6.1.4.1.674.11000.2000.200.21.9.21,FluidFS-MIB::fluidFSEventsParamsHealthNodeId,INTEGER,read-only,,current,,Id of a node
.1.3.6.1.4.1.674.11000.2000.200.21.9.22,FluidFS-MIB::fluidFSEventsParamsHealthSetId,INTEGER,read-only,,current,,Id of a LUNs' set
.1.3.6.1.4.1.674.11000.2000.200.21.9.23,FluidFS-MIB::fluidFSEventsParamsHealthLunId,INTEGER,read-only,,current,,Id of a LUN
.1.3.6.1.4.1.674.11000.2000.200.21.9.24,FluidFS-MIB::fluidFSEventsParamsHealthHealthyNodeId,OCTET,read-only,,current,,Healthy NAS controller id
.1.3.6.1.4.1.674.11000.2000.200.21.9.25,FluidFS-MIB::fluidFSEventsParamsHealthFaultyNodeId,OCTET,read-only,,current,,Faulty NAS controller id
.1.3.6.1.4.1.674.11000.2000.200.21.9.26,FluidFS-MIB::fluidFSEventsParamsHealthFmsAdminCmd,OCTET,read-only,,current,,FMS Admin command
.1.3.6.1.4.1.674.11000.2000.200.21.9.27,FluidFS-MIB::fluidFSEventsParamsHealthQuorumIP,OCTET,read-only,,current,,FMS Quorum IP
.1.3.6.1.4.1.674.11000.2000.200.21.9.28,FluidFS-MIB::fluidFSEventsParamsHealthFmsState,OCTET,read-only,,current,,FMS NAS controller State
.1.3.6.1.4.1.674.11000.2000.200.21.9.29,FluidFS-MIB::fluidFSEventsParamsHealthFsdInstance,INTEGER,read-only,,current,,FS Daemon instance in the node
.1.3.6.1.4.1.674.11000.2000.200.21.9.30,FluidFS-MIB::fluidFSEventsParamsHealthErrorDescription,OCTET,read-only,,current,,Description of the error
.1.3.6.1.4.1.674.11000.2000.200.21.9.31,FluidFS-MIB::fluidFSEventsParamsHealthBacktrace,OCTET,read-only,,current,,Debug backtrace information
.1.3.6.1.4.1.674.11000.2000.200.21.9.32,FluidFS-MIB::fluidFSEventsParamsHealthDsid,OCTET,read-only,,current,,DSID (internal filesystem ID) of file or directory. Use dsid2name utility to translate dsid to path via command line, also dsid2path translator is designed to do it automatically for events
.1.3.6.1.4.1.674.11000.2000.200.21.9.33,FluidFS-MIB::fluidFSEventsParamsHealthFileMapping,OCTET,read-only,,current,,FS mapping from file range to disk range (hex offsets)
.1.3.6.1.4.1.674.11000.2000.200.21.9.34,FluidFS-MIB::fluidFSEventsParamsHealthParentDirDsid,OCTET,read-only,,current,,Parent directory file id
.1.3.6.1.4.1.674.11000.2000.200.21.9.35,FluidFS-MIB::fluidFSEventsParamsHealthDirEntry,OCTET,read-only,,current,,Directory entry pointing to a file
.1.3.6.1.4.1.674.11000.2000.200.21.9.36,FluidFS-MIB::fluidFSEventsParamsHealthPacketLossThresholdPercent,INTEGER,read-only,,current,,Percents threashold for interconnect packet loss
.1.3.6.1.4.1.674.11000.2000.200.21.9.37,FluidFS-MIB::fluidFSEventsParamsHealthFsLogicalErrorDescription,OCTET,read-only,,current,,Internal description of logical error found in the FS layout
.1.3.6.1.4.1.674.11000.2000.200.21.9.38,FluidFS-MIB::fluidFSEventsParamsHealthLowCacheThresholdPercent,INTEGER,read-only,,current,,Percents threashold for low on cache
.1.3.6.1.4.1.674.11000.2000.200.21.9.39,FluidFS-MIB::fluidFSEventsParamsHealthProtocol,OCTET,read-only,,current,,Protocol
.1.3.6.1.4.1.674.11000.2000.200.21.9.40,FluidFS-MIB::fluidFSEventsParamsHealthConnectionsVector,OCTET,read-only,,current,,Connections per nodes
.1.3.6.1.4.1.674.11000.2000.200.21.9.41,FluidFS-MIB::fluidFSEventsParamsHealthAdClockSkew,INTEGER,read-only,,current,,Skew between NAS controller and AD clocks
.1.3.6.1.4.1.674.11000.2000.200.21.9.42,FluidFS-MIB::fluidFSEventsParamsHealthMaxAdClockSkew,INTEGER,read-only,,current,,Critical skew between NAS controller and AD clocks
.1.3.6.1.4.1.674.11000.2000.200.21.9.43,FluidFS-MIB::fluidFSEventsParamsHealthServerKind,OCTET,read-only,,current,,Server kind
.1.3.6.1.4.1.674.11000.2000.200.21.9.44,FluidFS-MIB::fluidFSEventsParamsHealthResponseTime,OCTET,read-only,,current,,Response time
.1.3.6.1.4.1.674.11000.2000.200.21.9.45,FluidFS-MIB::fluidFSEventsParamsHealthCriticalResponseTime,OCTET,read-only,,current,,Critical response time
.1.3.6.1.4.1.674.11000.2000.200.21.9.46,FluidFS-MIB::fluidFSEventsParamsHealthInternalInfo,OCTET,read-only,,current,,Internal failure info for RnD troubleshooting, for example slow request details
.1.3.6.1.4.1.674.11000.2000.200.21.9.47,FluidFS-MIB::fluidFSEventsParamsHealthServerIps,OCTET,read-only,,current,,List of server IPs
.1.3.6.1.4.1.674.11000.2000.200.21.9.48,FluidFS-MIB::fluidFSEventsParamsHealthOldQuorumIP,OCTET,read-only,,current,,FMS old Quorum IP
.1.3.6.1.4.1.674.11000.2000.200.21.9.49,FluidFS-MIB::fluidFSEventsParamsHealthDedupSpaceMarginMb,INTEGER,read-only,,current,,Free space needed for optimization of a volume, in Megabytes
.1.3.6.1.4.1.674.11000.2000.200.21.9.50,FluidFS-MIB::fluidFSEventsParamsHealthOldNumberOfVirtualDomains,INTEGER,read-only,,current,,Old number of Virtual Domains
.1.3.6.1.4.1.674.11000.2000.200.21.9.51,FluidFS-MIB::fluidFSEventsParamsHealthNewNumberOfVirtualDomains,INTEGER,read-only,,current,,New number of Virtual Domains
.1.3.6.1.4.1.674.11000.2000.200.21.9.52,FluidFS-MIB::fluidFSEventsParamsHealthNumberOfDomainsInPreviousDistribution,INTEGER,read-only,,current,,Number of virtual domains in the file's previous distribution
.1.3.6.1.4.1.674.11000.2000.200.21.9.53,FluidFS-MIB::fluidFSEventsParamsHealthNumberOfDomainsInNewDistribution,INTEGER,read-only,,current,,Number of virtual domains in the file's new distribution
.1.3.6.1.4.1.674.11000.2000.200.21.9.54,FluidFS-MIB::fluidFSEventsParamsHealthVirtualDomain,INTEGER,read-only,,current,,The number of the virtual domain
.1.3.6.1.4.1.674.11000.2000.200.21.9.55,FluidFS-MIB::fluidFSEventsParamsHealthCurrentPhysicalDomain,INTEGER,read-only,,current,,The number of the physical domain that is currently holds the virtual domain
.1.3.6.1.4.1.674.11000.2000.200.21.9.56,FluidFS-MIB::fluidFSEventsParamsHealthNewPhysicalDomain,INTEGER,read-only,,current,,The number of the physical domain that will hold the virtual domain after the hot migration process ends
.1.3.6.1.4.1.674.11000.2000.200.21.9.57,FluidFS-MIB::fluidFSEventsParamsHealthIpAddr,OCTET,read-only,,current,,IP Address
.1.3.6.1.4.1.674.11000.2000.200.21.9.58,FluidFS-MIB::fluidFSEventsParamsHealthMacAddr,OCTET,read-only,,current,,mac address
.1.3.6.1.4.1.674.11000.2000.200.21.9.59,FluidFS-MIB::fluidFSEventsParamsHealthLunsList,OCTET,read-only,,current,,A list of LUNs, comma separated
.1.3.6.1.4.1.674.11000.2000.200.21.9.60,FluidFS-MIB::fluidFSEventsParamsHealthTenantId,OCTET,read-only,,current,,Tenant unique identifier
.1.3.6.1.4.1.674.11000.2000.200.21.9.61,FluidFS-MIB::fluidFSEventsParamsHealthServerNames,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.62,FluidFS-MIB::fluidFSEventsParamsHealthDomainName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.63,FluidFS-MIB::fluidFSEventsParamsHealthServerList,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.64,FluidFS-MIB::fluidFSEventsParamsHealthDomainControllerName,OCTET,read-only,,current,,Active Directory domain name
.1.3.6.1.4.1.674.11000.2000.200.21.9.65,FluidFS-MIB::fluidFSEventsParamsHealthFsid,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.66,FluidFS-MIB::fluidFSEventsParamsHealthTimeDiffSec,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.67,FluidFS-MIB::fluidFSEventsParamsHealthFSIDName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.68,FluidFS-MIB::fluidFSEventsParamsHealthParentDirDsidPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.69,FluidFS-MIB::fluidFSEventsParamsHealthTenantName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.9.70,FluidFS-MIB::fluidFSEventsParamsHealthDsidPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.10,FluidFS-MIB::fluidFSEventsParamsAntivirus,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.10.1,FluidFS-MIB::fluidFSEventsParamsAntivirusShareName,OCTET,read-only,,current,,cifs share where scanning occurs
.1.3.6.1.4.1.674.11000.2000.200.21.10.2,FluidFS-MIB::fluidFSEventsParamsAntivirusVirusDescription,OCTET,read-only,,current,,brief virus description
.1.3.6.1.4.1.674.11000.2000.200.21.10.3,FluidFS-MIB::fluidFSEventsParamsAntivirusFilePath,OCTET,read-only,,current,,path of the scanned file
.1.3.6.1.4.1.674.11000.2000.200.21.10.4,FluidFS-MIB::fluidFSEventsParamsAntivirusQuarantinedPath,OCTET,read-only,,current,,path of the quarantined file
.1.3.6.1.4.1.674.11000.2000.200.21.10.5,FluidFS-MIB::fluidFSEventsParamsAntivirusInfectedAction,OCTET,read-only,,current,,action applied to infected file
.1.3.6.1.4.1.674.11000.2000.200.21.10.6,FluidFS-MIB::fluidFSEventsParamsAntivirusAdsName,OCTET,read-only,,current,,name of the ADS
.1.3.6.1.4.1.674.11000.2000.200.21.10.7,FluidFS-MIB::fluidFSEventsParamsAntivirusSnapName,OCTET,read-only,,current,,name of the snapshot for previous version
.1.3.6.1.4.1.674.11000.2000.200.21.10.8,FluidFS-MIB::fluidFSEventsParamsAntivirusHost,OCTET,read-only,,current,,antivirus host hostname or IP address
.1.3.6.1.4.1.674.11000.2000.200.21.10.9,FluidFS-MIB::fluidFSEventsParamsAntivirusPort,INTEGER,read-only,,current,,antivirus host port
.1.3.6.1.4.1.674.11000.2000.200.21.10.10,FluidFS-MIB::fluidFSEventsParamsAntivirusScanningFacility,OCTET,read-only,,current,,actual antivirus host and port used for scanning
.1.3.6.1.4.1.674.11000.2000.200.21.10.11,FluidFS-MIB::fluidFSEventsParamsAntivirusScanningDuration,OCTET,read-only,,current,,scanning duration, real number in seconds with enough precision
.1.3.6.1.4.1.674.11000.2000.200.21.10.12,FluidFS-MIB::fluidFSEventsParamsAntivirusScanningDurationThreshold,INTEGER,read-only,,current,,critical scanning duration in seconds used as the threshold for event
.1.3.6.1.4.1.674.11000.2000.200.21.10.13,FluidFS-MIB::fluidFSEventsParamsAntivirusDsid,OCTET,read-only,,current,,DSID (internal filesystem ID) of file or directory. Use dsid2name utility to translate dsid to path via command line, also dsid2path translator is designed to do it automatically for events
.1.3.6.1.4.1.674.11000.2000.200.21.10.14,FluidFS-MIB::fluidFSEventsParamsAntivirusFSID,INTEGER,read-only,,current,,NAS volume id
.1.3.6.1.4.1.674.11000.2000.200.21.10.15,FluidFS-MIB::fluidFSEventsParamsAntivirusAccessDeniedReason,OCTET,read-only,,current,,Extended details about reason of returned ACCESS_DENIED error
.1.3.6.1.4.1.674.11000.2000.200.21.10.16,FluidFS-MIB::fluidFSEventsParamsAntivirusFileSizeMb,INTEGER,read-only,,current,,Size (in Megabytes) of the file to be scanned for viruses
.1.3.6.1.4.1.674.11000.2000.200.21.10.17,FluidFS-MIB::fluidFSEventsParamsAntivirusLargeFileSizeLimitMb,INTEGER,read-only,,current,,Limit of the file size (in Megabytes) of the file to be scanned for viruses. Larger files are not scanned.
.1.3.6.1.4.1.674.11000.2000.200.21.10.18,FluidFS-MIB::fluidFSEventsParamsAntivirusIcapStatus,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.10.19,FluidFS-MIB::fluidFSEventsParamsAntivirusServer,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.10.21,FluidFS-MIB::fluidFSEventsParamsAntivirusFSIDName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.10.22,FluidFS-MIB::fluidFSEventsParamsAntivirusDsidPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11,FluidFS-MIB::fluidFSEventsParamsClientAccess,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.1,FluidFS-MIB::fluidFSEventsParamsClientAccessMaxConnections,INTEGER,read-only,,current,,maximal number of connections
.1.3.6.1.4.1.674.11000.2000.200.21.11.2,FluidFS-MIB::fluidFSEventsParamsClientAccessNfsExport,OCTET,read-only,,current,,NFS export name, as defined on cluster
.1.3.6.1.4.1.674.11000.2000.200.21.11.3,FluidFS-MIB::fluidFSEventsParamsClientAccessMountPath,OCTET,read-only,,current,,NFS mount path as specified by user for mount command
.1.3.6.1.4.1.674.11000.2000.200.21.11.4,FluidFS-MIB::fluidFSEventsParamsClientAccessNfsClientPort,INTEGER,read-only,,current,,NFS client port number
.1.3.6.1.4.1.674.11000.2000.200.21.11.5,FluidFS-MIB::fluidFSEventsParamsClientAccessNfsExportOptions,OCTET,read-only,,current,,NFS export options, as defined on cluster
.1.3.6.1.4.1.674.11000.2000.200.21.11.6,FluidFS-MIB::fluidFSEventsParamsClientAccessClientIpAddr,OCTET,read-only,,current,,Client IP address
.1.3.6.1.4.1.674.11000.2000.200.21.11.7,FluidFS-MIB::fluidFSEventsParamsClientAccessNfsUser,OCTET,read-only,,current,,User ID as seen from NFS server, either UID or SID. Will be translated to username by 'uidOrSid2name' translator automatically
.1.3.6.1.4.1.674.11000.2000.200.21.11.8,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsUser,INTEGER,read-only,,current,,User ID as seen from Samba - TUID. Will be translated to username by 'tuid2name' translator automatically
.1.3.6.1.4.1.674.11000.2000.200.21.11.9,FluidFS-MIB::fluidFSEventsParamsClientAccessUserName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.10,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsShare,OCTET,read-only,,current,,SMB share name, as defined on cluster
.1.3.6.1.4.1.674.11000.2000.200.21.11.11,FluidFS-MIB::fluidFSEventsParamsClientAccessDsid,OCTET,read-only,,current,,DSID (internal filesystem ID) of file or directory. Use dsid2name utility to translate dsid to path.
.1.3.6.1.4.1.674.11000.2000.200.21.11.12,FluidFS-MIB::fluidFSEventsParamsClientAccessNfsOp,OCTET,read-only,,current,,NFS operation (NFS verb, command, etc)
.1.3.6.1.4.1.674.11000.2000.200.21.11.13,FluidFS-MIB::fluidFSEventsParamsClientAccessVolumeStyle,OCTET,read-only,,current,,Volume style - NTFS, UNIX or MIXED
.1.3.6.1.4.1.674.11000.2000.200.21.11.14,FluidFS-MIB::fluidFSEventsParamsClientAccessUserOwner,OCTET,read-only,,current,,User owner for a file
.1.3.6.1.4.1.674.11000.2000.200.21.11.15,FluidFS-MIB::fluidFSEventsParamsClientAccessGroupOwner,OCTET,read-only,,current,,Group owner for a file
.1.3.6.1.4.1.674.11000.2000.200.21.11.16,FluidFS-MIB::fluidFSEventsParamsClientAccessUserIdentityType,OCTET,read-only,,current,,User type (NTFS or UNIX, i.e. UID or SID)
.1.3.6.1.4.1.674.11000.2000.200.21.11.17,FluidFS-MIB::fluidFSEventsParamsClientAccessGroupIdentityType,OCTET,read-only,,current,,6roup type (NTFS or UNIX, i.e. GID or GSID)
.1.3.6.1.4.1.674.11000.2000.200.21.11.18,FluidFS-MIB::fluidFSEventsParamsClientAccessDesiredNfsAccessMask,OCTET,read-only,,current,,7esired access mask
.1.3.6.1.4.1.674.11000.2000.200.21.11.19,FluidFS-MIB::fluidFSEventsParamsClientAccessGrantedNfsAccessMask,OCTET,read-only,,current,,Granted (maximal) access mask
.1.3.6.1.4.1.674.11000.2000.200.21.11.20,FluidFS-MIB::fluidFSEventsParamsClientAccessDesiredCifsAccessMask,INTEGER,read-only,,current,,Desired access mask
.1.3.6.1.4.1.674.11000.2000.200.21.11.21,FluidFS-MIB::fluidFSEventsParamsClientAccessGrantedCifsAccessMask,INTEGER,read-only,,current,,Granted (maximal) access mask
.1.3.6.1.4.1.674.11000.2000.200.21.11.22,FluidFS-MIB::fluidFSEventsParamsClientAccessMissedCifsAccessBits,INTEGER,read-only,,current,,Missed access bits (mask)
.1.3.6.1.4.1.674.11000.2000.200.21.11.23,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsOp,OCTET,read-only,,current,,SMB operation (SMB verb, VFS verb, generic command, etc)
.1.3.6.1.4.1.674.11000.2000.200.21.11.24,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsPrivileges,OCTET,read-only,,current,,SMB User privileges
.1.3.6.1.4.1.674.11000.2000.200.21.11.25,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsGuestAccount,OCTET,read-only,,current,,SMB guest account as configured on the cluster
.1.3.6.1.4.1.674.11000.2000.200.21.11.26,FluidFS-MIB::fluidFSEventsParamsClientAccessNasContainerId,OCTET,read-only,,current,,NAS Volume (volume name)
.1.3.6.1.4.1.674.11000.2000.200.21.11.27,FluidFS-MIB::fluidFSEventsParamsClientAccessNasContainerPath,OCTET,read-only,,current,,Path related to specified NAS Volume
.1.3.6.1.4.1.674.11000.2000.200.21.11.28,FluidFS-MIB::fluidFSEventsParamsClientAccessNasControllerId,OCTET,read-only,,current,,NAS controller ID (node ID)
.1.3.6.1.4.1.674.11000.2000.200.21.11.29,FluidFS-MIB::fluidFSEventsParamsClientAccessNasContainerIdInteger,INTEGER,read-only,,current,,NAS Volume ID (volume ID, i.e. FSID uint32 value). Will be translated to volume name by translator
.1.3.6.1.4.1.674.11000.2000.200.21.11.30,FluidFS-MIB::fluidFSEventsParamsClientAccessLockingUser,INTEGER,read-only,,current,,User identity who holds the lock on requested file and causing access conflict
.1.3.6.1.4.1.674.11000.2000.200.21.11.31,FluidFS-MIB::fluidFSEventsParamsClientAccessInternalInfo,OCTET,read-only,,current,,Internal failure info for RnD troubleshooting, for example access decision flow or client disconnection reason
.1.3.6.1.4.1.674.11000.2000.200.21.11.32,FluidFS-MIB::fluidFSEventsParamsClientAccessNfsErrorCode,INTEGER,read-only,,current,,NFSERR_x code for troubleshooting purpose (as the part of internal info)
.1.3.6.1.4.1.674.11000.2000.200.21.11.33,FluidFS-MIB::fluidFSEventsParamsClientAccessOpenModeAccessBits,INTEGER,read-only,,current,,Open mode access bits(mask) used during file open
.1.3.6.1.4.1.674.11000.2000.200.21.11.34,FluidFS-MIB::fluidFSEventsParamsClientAccessShareLevelPermissionsMode,OCTET,read-only,,current,,Share-level permission mode applied for current connection, like NONE, READ, CHANGE or FULL-CONTROL
.1.3.6.1.4.1.674.11000.2000.200.21.11.35,FluidFS-MIB::fluidFSEventsParamsClientAccessOperation,OCTET,read-only,,current,,operation being executed
.1.3.6.1.4.1.674.11000.2000.200.21.11.36,FluidFS-MIB::fluidFSEventsParamsClientAccessUser,OCTET,read-only,,current,,User ID (will undergo transformation as required)
.1.3.6.1.4.1.674.11000.2000.200.21.11.37,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsUser2,OCTET,read-only,,current,,User SID as seen by likewise/cifs_server
.1.3.6.1.4.1.674.11000.2000.200.21.11.38,FluidFS-MIB::fluidFSEventsParamsClientAccessNetgroupName,OCTET,read-only,,current,,UNIX external repository netgroup name
.1.3.6.1.4.1.674.11000.2000.200.21.11.39,FluidFS-MIB::fluidFSEventsParamsClientAccessParentNetgroupName,OCTET,read-only,,current,,UNIX external repository netgroup name
.1.3.6.1.4.1.674.11000.2000.200.21.11.40,FluidFS-MIB::fluidFSEventsParamsClientAccessNetgroupThreshold,INTEGER,read-only,,current,,Critical threshold of netgroup metric (like size or nesting level)
.1.3.6.1.4.1.674.11000.2000.200.21.11.41,FluidFS-MIB::fluidFSEventsParamsClientAccessNodeId,INTEGER,read-only,,current,,Node Id (NAS controller ID)
.1.3.6.1.4.1.674.11000.2000.200.21.11.42,FluidFS-MIB::fluidFSEventsParamsClientAccessMaxOpenFilesPerNode,INTEGER,read-only,,current,,maximal number of open files per node
.1.3.6.1.4.1.674.11000.2000.200.21.11.43,FluidFS-MIB::fluidFSEventsParamsClientAccessAdProviderName,OCTET,read-only,,current,,Name of active directory provider
.1.3.6.1.4.1.674.11000.2000.200.21.11.44,FluidFS-MIB::fluidFSEventsParamsClientAccessDomainName,OCTET,read-only,,current,,Domain name
.1.3.6.1.4.1.674.11000.2000.200.21.11.45,FluidFS-MIB::fluidFSEventsParamsClientAccessFileExtension,OCTET,read-only,,current,,File extension
.1.3.6.1.4.1.674.11000.2000.200.21.11.46,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsErrorCode,INTEGER,read-only,,current,,Cifs code for troubleshooting purpose (as the part of internal info)
.1.3.6.1.4.1.674.11000.2000.200.21.11.47,FluidFS-MIB::fluidFSEventsParamsClientAccessClusterVIP,OCTET,read-only,,current,,Server VIP address
.1.3.6.1.4.1.674.11000.2000.200.21.11.48,FluidFS-MIB::fluidFSEventsParamsClientAccessServerKind,OCTET,read-only,,current,,Server kind
.1.3.6.1.4.1.674.11000.2000.200.21.11.49,FluidFS-MIB::fluidFSEventsParamsClientAccessService,OCTET,read-only,,current,,Service name
.1.3.6.1.4.1.674.11000.2000.200.21.11.50,FluidFS-MIB::fluidFSEventsParamsClientAccessUserEmail,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.51,FluidFS-MIB::fluidFSEventsParamsClientAccessDroppedNotificationsCounter,INTEGER,read-only,,current,,counts how many events were dropped
.1.3.6.1.4.1.674.11000.2000.200.21.11.52,FluidFS-MIB::fluidFSEventsParamsClientAccessPolicyName,OCTET,read-only,,current,,Policy name
.1.3.6.1.4.1.674.11000.2000.200.21.11.53,FluidFS-MIB::fluidFSEventsParamsClientAccessPolicyGuid,OCTET,read-only,,current,,Policy guid
.1.3.6.1.4.1.674.11000.2000.200.21.11.54,FluidFS-MIB::fluidFSEventsParamsClientAccessPolicyTargetPath,OCTET,read-only,,current,,Path
.1.3.6.1.4.1.674.11000.2000.200.21.11.55,FluidFS-MIB::fluidFSEventsParamsClientAccessTenantId,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.56,FluidFS-MIB::fluidFSEventsParamsClientAccessTlsVersion,INTEGER,read-only,,current,,Version of TLS protocol
.1.3.6.1.4.1.674.11000.2000.200.21.11.57,FluidFS-MIB::fluidFSEventsParamsClientAccessBaseLandingPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.58,FluidFS-MIB::fluidFSEventsParamsClientAccessSuffixLandingPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.59,FluidFS-MIB::fluidFSEventsParamsClientAccessFilePath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.60,FluidFS-MIB::fluidFSEventsParamsClientAccessSearchedObjects,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.61,FluidFS-MIB::fluidFSEventsParamsClientAccessRuleDN,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.62,FluidFS-MIB::fluidFSEventsParamsClientAccessPolicyDN,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.63,FluidFS-MIB::fluidFSEventsParamsClientAccessNasContainerIdIntegerName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.64,FluidFS-MIB::fluidFSEventsParamsClientAccessTenantName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.65,FluidFS-MIB::fluidFSEventsParamsClientAccessNfsUserName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.66,FluidFS-MIB::fluidFSEventsParamsClientAccessDsidPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.67,FluidFS-MIB::fluidFSEventsParamsClientAccessDesiredNfsAccessMaskHrf,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.68,FluidFS-MIB::fluidFSEventsParamsClientAccessGrantedNfsAccessMaskHrf,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.69,FluidFS-MIB::fluidFSEventsParamsClientAccessUserOwnerName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.70,FluidFS-MIB::fluidFSEventsParamsClientAccessGroupOwnerName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.71,FluidFS-MIB::fluidFSEventsParamsClientAccessDesiredCifsAccessMaskName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.72,FluidFS-MIB::fluidFSEventsParamsClientAccessMissedCifsAccessBitsName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.73,FluidFS-MIB::fluidFSEventsParamsClientAccessOpenModeAccessBitsName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.11.74,FluidFS-MIB::fluidFSEventsParamsClientAccessCifsUser2Name,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.13,FluidFS-MIB::fluidFSEventsParamsLicensing,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.13.1,FluidFS-MIB::fluidFSEventsParamsLicensingFileName,OCTET,read-only,,current,,Name of the license xml file 
.1.3.6.1.4.1.674.11000.2000.200.21.13.2,FluidFS-MIB::fluidFSEventsParamsLicensingInstalledFeatures,OCTET,read-only,,current,,List of the features which were installed, seperated by commas
.1.3.6.1.4.1.674.11000.2000.200.21.13.3,FluidFS-MIB::fluidFSEventsParamsLicensingNumOfDays,INTEGER,read-only,,current,,Number of days till expiration of feature
.1.3.6.1.4.1.674.11000.2000.200.21.13.4,FluidFS-MIB::fluidFSEventsParamsLicensingFluidFsVersion,OCTET,read-only,,current,,FluidFS software version
.1.3.6.1.4.1.674.11000.2000.200.21.14,FluidFS-MIB::fluidFSEventsParamsExaminer,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.14.1,FluidFS-MIB::fluidFSEventsParamsExaminerCategory,OCTET,read-only,,current,,Corruption category
.1.3.6.1.4.1.674.11000.2000.200.21.14.2,FluidFS-MIB::fluidFSEventsParamsExaminerLevel,OCTET,read-only,,current,,Level of the error
.1.3.6.1.4.1.674.11000.2000.200.21.15,FluidFS-MIB::fluidFSEventsParamsComponent,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.1,FluidFS-MIB::fluidFSEventsParamsComponentUserName,OCTET,read-only,,current,,User name
.1.3.6.1.4.1.674.11000.2000.200.21.15.2,FluidFS-MIB::fluidFSEventsParamsComponentObjectId,OCTET,read-only,,current,,objectId
.1.3.6.1.4.1.674.11000.2000.200.21.15.3,FluidFS-MIB::fluidFSEventsParamsComponentTimezone,OCTET,read-only,,current,,timezone
.1.3.6.1.4.1.674.11000.2000.200.21.15.4,FluidFS-MIB::fluidFSEventsParamsComponentName,OCTET,read-only,,current,,Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.5,FluidFS-MIB::fluidFSEventsParamsComponentRetcodeString,OCTET,read-only,,current,,RetCode string
.1.3.6.1.4.1.674.11000.2000.200.21.15.6,FluidFS-MIB::fluidFSEventsParamsComponentRemoteVolume,OCTET,read-only,,current,,Remote Volume
.1.3.6.1.4.1.674.11000.2000.200.21.15.7,FluidFS-MIB::fluidFSEventsParamsComponentSystemServiceState,OCTET,read-only,,current,,System Service Mode
.1.3.6.1.4.1.674.11000.2000.200.21.15.8,FluidFS-MIB::fluidFSEventsParamsComponentAdministrator,OCTET,read-only,,current,,System administrator
.1.3.6.1.4.1.674.11000.2000.200.21.15.9,FluidFS-MIB::fluidFSEventsParamsComponentFSID,OCTET,read-only,,current,,NAS volume id
.1.3.6.1.4.1.674.11000.2000.200.21.15.10,FluidFS-MIB::fluidFSEventsParamsComponentSnapshotID,OCTET,read-only,,current,,Snapshot id
.1.3.6.1.4.1.674.11000.2000.200.21.15.11,FluidFS-MIB::fluidFSEventsParamsComponentNdmpLock,OCTET,read-only,,current,,NdmpLock
.1.3.6.1.4.1.674.11000.2000.200.21.15.12,FluidFS-MIB::fluidFSEventsParamsComponentExpiry,OCTET,read-only,,current,,Expiry
.1.3.6.1.4.1.674.11000.2000.200.21.15.13,FluidFS-MIB::fluidFSEventsParamsComponentShareName,OCTET,read-only,,current,,Name of the SMB share
.1.3.6.1.4.1.674.11000.2000.200.21.15.14,FluidFS-MIB::fluidFSEventsParamsComponentNFSExportPath,OCTET,read-only,,current,,Path that is exported by NFS filesystem
.1.3.6.1.4.1.674.11000.2000.200.21.15.15,FluidFS-MIB::fluidFSEventsParamsComponentDomain,OCTET,read-only,,current,,Domain
.1.3.6.1.4.1.674.11000.2000.200.21.15.16,FluidFS-MIB::fluidFSEventsParamsComponentUserInterfaceType,OCTET,read-only,,current,,User interface type
.1.3.6.1.4.1.674.11000.2000.200.21.15.17,FluidFS-MIB::fluidFSEventsParamsComponentUserInterfaceClient,OCTET,read-only,,current,,User interface client
.1.3.6.1.4.1.674.11000.2000.200.21.15.18,FluidFS-MIB::fluidFSEventsParamsComponentRemoteSystemName,OCTET,read-only,,current,,System (cluster) name
.1.3.6.1.4.1.674.11000.2000.200.21.15.19,FluidFS-MIB::fluidFSEventsParamsComponentApplianceServiceTag,OCTET,read-only,,current,,NAS appliance service tag
.1.3.6.1.4.1.674.11000.2000.200.21.15.20,FluidFS-MIB::fluidFSEventsParamsComponentServicePackFileName,OCTET,read-only,,current,,Service pack file name
.1.3.6.1.4.1.674.11000.2000.200.21.15.21,FluidFS-MIB::fluidFSEventsParamsComponentNetworkId,OCTET,read-only,,current,,Network IP address
.1.3.6.1.4.1.674.11000.2000.200.21.15.22,FluidFS-MIB::fluidFSEventsParamsComponentNetmask,OCTET,read-only,,current,,Network netmask
.1.3.6.1.4.1.674.11000.2000.200.21.15.23,FluidFS-MIB::fluidFSEventsParamsComponentSubnetAccess,OCTET,read-only,,current,,Subnet Access type
.1.3.6.1.4.1.674.11000.2000.200.21.15.24,FluidFS-MIB::fluidFSEventsParamsComponentRouteName,OCTET,read-only,,current,,Route Rules unique name
.1.3.6.1.4.1.674.11000.2000.200.21.15.25,FluidFS-MIB::fluidFSEventsParamsComponentRouteGateway,OCTET,read-only,,current,,Route Rules Gateway IP
.1.3.6.1.4.1.674.11000.2000.200.21.15.26,FluidFS-MIB::fluidFSEventsParamsComponentClientNetworkInterfaceMtu,OCTET,read-only,,current,,MTU
.1.3.6.1.4.1.674.11000.2000.200.21.15.27,FluidFS-MIB::fluidFSEventsParamsComponentClientNetworkInterfaceBondMode,OCTET,read-only,,current,,Bonding mode
.1.3.6.1.4.1.674.11000.2000.200.21.15.28,FluidFS-MIB::fluidFSEventsParamsComponentLocalAccountName,OCTET,read-only,,current,,Local user/group name
.1.3.6.1.4.1.674.11000.2000.200.21.15.29,FluidFS-MIB::fluidFSEventsParamsComponentUserDatabaseType,OCTET,read-only,,current,,Type of external UNIX accounts repository: NIS, LDAP or None.
.1.3.6.1.4.1.674.11000.2000.200.21.15.30,FluidFS-MIB::fluidFSEventsParamsComponentWindowsUser,OCTET,read-only,,current,,User name from Windows repository
.1.3.6.1.4.1.674.11000.2000.200.21.15.31,FluidFS-MIB::fluidFSEventsParamsComponentUnixUser,OCTET,read-only,,current,,User name from UNIX repository
.1.3.6.1.4.1.674.11000.2000.200.21.15.32,FluidFS-MIB::fluidFSEventsParamsComponentBlink1,OCTET,read-only,,current,,Blink first controller
.1.3.6.1.4.1.674.11000.2000.200.21.15.33,FluidFS-MIB::fluidFSEventsParamsComponentBlink2,OCTET,read-only,,current,,Blink second controller
.1.3.6.1.4.1.674.11000.2000.200.21.15.34,FluidFS-MIB::fluidFSEventsParamsComponentControllerId,OCTET,read-only,,current,,The controller ID
.1.3.6.1.4.1.674.11000.2000.200.21.15.35,FluidFS-MIB::fluidFSEventsParamsComponentClientIp,OCTET,read-only,,current,,Client Ip
.1.3.6.1.4.1.674.11000.2000.200.21.15.36,FluidFS-MIB::fluidFSEventsParamsComponentAccessIp,OCTET,read-only,,current,,Access Ip
.1.3.6.1.4.1.674.11000.2000.200.21.15.37,FluidFS-MIB::fluidFSEventsParamsComponentNodeId,OCTET,read-only,,current,,Node Id
.1.3.6.1.4.1.674.11000.2000.200.21.15.38,FluidFS-MIB::fluidFSEventsParamsComponentNetworkInterface,OCTET,read-only,,current,,Network Interface
.1.3.6.1.4.1.674.11000.2000.200.21.15.39,FluidFS-MIB::fluidFSEventsParamsComponentPinState,OCTET,read-only,,current,,Pin or Unpin client to specific controller
.1.3.6.1.4.1.674.11000.2000.200.21.15.40,FluidFS-MIB::fluidFSEventsParamsComponentApplianceId,OCTET,read-only,,current,,Appliance Id
.1.3.6.1.4.1.674.11000.2000.200.21.15.41,FluidFS-MIB::fluidFSEventsParamsComponentClusterName,OCTET,read-only,,current,,Cluster Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.42,FluidFS-MIB::fluidFSEventsParamsComponentLicensedFeature,OCTET,read-only,,current,,Licensed Feature
.1.3.6.1.4.1.674.11000.2000.200.21.15.43,FluidFS-MIB::fluidFSEventsParamsComponentFabricName,OCTET,read-only,,current,,Fabric Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.44,FluidFS-MIB::fluidFSEventsParamsComponentSourceFilePath,OCTET,read-only,,current,,Source File Path
.1.3.6.1.4.1.674.11000.2000.200.21.15.45,FluidFS-MIB::fluidFSEventsParamsComponentDestinationDir,OCTET,read-only,,current,,Destination Directory
.1.3.6.1.4.1.674.11000.2000.200.21.15.46,FluidFS-MIB::fluidFSEventsParamsComponentDestinationFileName,OCTET,read-only,,current,,Destination File Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.47,FluidFS-MIB::fluidFSEventsParamsComponentDestinationParentDir,OCTET,read-only,,current,,Destination Parent Directory
.1.3.6.1.4.1.674.11000.2000.200.21.15.48,FluidFS-MIB::fluidFSEventsParamsComponentNDMPSessionId,OCTET,read-only,,current,,NDMP Session ID
.1.3.6.1.4.1.674.11000.2000.200.21.15.49,FluidFS-MIB::fluidFSEventsParamsComponentClientComputerName,OCTET,read-only,,current,,Client Computer Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.50,FluidFS-MIB::fluidFSEventsParamsComponentClientUserName,OCTET,read-only,,current,,Client User Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.51,FluidFS-MIB::fluidFSEventsParamsComponentPartnerIp,OCTET,read-only,,current,,Partner IP
.1.3.6.1.4.1.674.11000.2000.200.21.15.52,FluidFS-MIB::fluidFSEventsParamsComponentVirtualVolumeFolderName,OCTET,read-only,,current,,Virtual Volume Folder Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.53,FluidFS-MIB::fluidFSEventsParamsComponentPrefix,OCTET,read-only,,current,,Network prefix
.1.3.6.1.4.1.674.11000.2000.200.21.15.54,FluidFS-MIB::fluidFSEventsParamsComponentRunCifsFileAccessibilityDiagnosticShareName,OCTET,read-only,,current,,RunCifsFileAccessibilityDiagnosticShareName
.1.3.6.1.4.1.674.11000.2000.200.21.15.55,FluidFS-MIB::fluidFSEventsParamsComponentRunCifsFileAccessibilityDiagnosticClientIP,OCTET,read-only,,current,,RunCifsFileAccessibilityDiagnosticClientIP
.1.3.6.1.4.1.674.11000.2000.200.21.15.56,FluidFS-MIB::fluidFSEventsParamsComponentRunCifsFileAccessibilityDiagnosticPath,OCTET,read-only,,current,,RunCifsFileAccessibilityDiagnosticPath
.1.3.6.1.4.1.674.11000.2000.200.21.15.57,FluidFS-MIB::fluidFSEventsParamsComponentRunClientConnectivityDiagnosticClientIP,OCTET,read-only,,current,,RunClientConnectivityDiagnosticClientIP
.1.3.6.1.4.1.674.11000.2000.200.21.15.58,FluidFS-MIB::fluidFSEventsParamsComponentRunClientConnectivityDiagnosticProtocol,OCTET,read-only,,current,,RunClientConnectivityDiagnosticProtocol
.1.3.6.1.4.1.674.11000.2000.200.21.15.59,FluidFS-MIB::fluidFSEventsParamsComponentRunNetworkDiagnosticClientIP,OCTET,read-only,,current,,RunNetworkDiagnosticClientIP
.1.3.6.1.4.1.674.11000.2000.200.21.15.60,FluidFS-MIB::fluidFSEventsParamsComponentRunNfsFileAccessibilityDiagnosticExportPath,OCTET,read-only,,current,,RunNfsFileAccessibilityDiagnosticExportPath
.1.3.6.1.4.1.674.11000.2000.200.21.15.61,FluidFS-MIB::fluidFSEventsParamsComponentRunNfsFileAccessibilityDiagnosticFSID,OCTET,read-only,,current,,RunNfsFileAccessibilityDiagnosticFSID
.1.3.6.1.4.1.674.11000.2000.200.21.15.62,FluidFS-MIB::fluidFSEventsParamsComponentRunNfsFileAccessibilityDiagnosticClientIP,OCTET,read-only,,current,,RunNfsFileAccessibilityDiagnosticClientIP
.1.3.6.1.4.1.674.11000.2000.200.21.15.63,FluidFS-MIB::fluidFSEventsParamsComponentRunNfsFileAccessibilityDiagnosticPath,OCTET,read-only,,current,,RunNfsFileAccessibilityDiagnosticPath
.1.3.6.1.4.1.674.11000.2000.200.21.15.64,FluidFS-MIB::fluidFSEventsParamsComponentRunPerformanceDiagnosticFSID,OCTET,read-only,,current,,RunPerformanceDiagnosticFSID
.1.3.6.1.4.1.674.11000.2000.200.21.15.65,FluidFS-MIB::fluidFSEventsParamsComponentFilePath,OCTET,read-only,,current,,File path
.1.3.6.1.4.1.674.11000.2000.200.21.15.66,FluidFS-MIB::fluidFSEventsParamsComponentSourceFSID,OCTET,read-only,,current,,Source NAS volume id
.1.3.6.1.4.1.674.11000.2000.200.21.15.67,FluidFS-MIB::fluidFSEventsParamsComponentDestinationFSID,OCTET,read-only,,current,,Destination NAS volume id
.1.3.6.1.4.1.674.11000.2000.200.21.15.68,FluidFS-MIB::fluidFSEventsParamsComponentDestinationFilePath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.69,FluidFS-MIB::fluidFSEventsParamsComponentClientProtocol,OCTET,read-only,,current,,NFS/SMB protocol
.1.3.6.1.4.1.674.11000.2000.200.21.15.70,FluidFS-MIB::fluidFSEventsParamsComponentClientProtocolDetails,OCTET,read-only,,current,,Session or opened file details
.1.3.6.1.4.1.674.11000.2000.200.21.15.71,FluidFS-MIB::fluidFSEventsParamsComponentSourceVMName,OCTET,read-only,,current,,Source VM Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.72,FluidFS-MIB::fluidFSEventsParamsComponentVmWareServerName,OCTET,read-only,,current,,VMWare Server Name
.1.3.6.1.4.1.674.11000.2000.200.21.15.73,FluidFS-MIB::fluidFSEventsParamsComponentNumberOfClones,OCTET,read-only,,current,,Number Of Clones
.1.3.6.1.4.1.674.11000.2000.200.21.15.74,FluidFS-MIB::fluidFSEventsParamsComponentServicePackVersion,OCTET,read-only,,current,,Version of a service pack
.1.3.6.1.4.1.674.11000.2000.200.21.15.75,FluidFS-MIB::fluidFSEventsParamsComponentDestinationNetworkID,OCTET,read-only,,current,,Route Rules route ip address
.1.3.6.1.4.1.674.11000.2000.200.21.15.76,FluidFS-MIB::fluidFSEventsParamsComponentDestinationPrefix,OCTET,read-only,,current,,Route Rules route ip prefix
.1.3.6.1.4.1.674.11000.2000.200.21.15.77,FluidFS-MIB::fluidFSEventsParamsComponentFolderPath,OCTET,read-only,,current,,Folder path
.1.3.6.1.4.1.674.11000.2000.200.21.15.78,FluidFS-MIB::fluidFSEventsParamsComponentDSID,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.79,FluidFS-MIB::fluidFSEventsParamsComponentTapeDeviceName,OCTET,read-only,,current,,Configured name of tape device
.1.3.6.1.4.1.674.11000.2000.200.21.15.80,FluidFS-MIB::fluidFSEventsParamsComponentEventsSpace,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.81,FluidFS-MIB::fluidFSEventsParamsComponentGpoTimeout,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.82,FluidFS-MIB::fluidFSEventsParamsComponentTenantId,OCTET,read-only,,current,,Tenant unique identifier
.1.3.6.1.4.1.674.11000.2000.200.21.15.84,FluidFS-MIB::fluidFSEventsParamsComponentUID,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.85,FluidFS-MIB::fluidFSEventsParamsComponentRemoteClusterId,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.86,FluidFS-MIB::fluidFSEventsParamsComponentRemoteFSID,INTEGER,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.87,FluidFS-MIB::fluidFSEventsParamsComponentStorageId,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.90,FluidFS-MIB::fluidFSEventsParamsComponentState,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.91,FluidFS-MIB::fluidFSEventsParamsComponentFSIDName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.92,FluidFS-MIB::fluidFSEventsParamsComponentTenantName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.93,FluidFS-MIB::fluidFSEventsParamsComponentAdminName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.94,FluidFS-MIB::fluidFSEventsParamsComponentRemoteClusterName,OCTET,read-only,,current,,Name of the partner system
.1.3.6.1.4.1.674.11000.2000.200.21.15.95,FluidFS-MIB::fluidFSEventsParamsComponentRemoteVolumeName,OCTET,read-only,,current,,Name of the remote NAS volume
.1.3.6.1.4.1.674.11000.2000.200.21.15.96,FluidFS-MIB::fluidFSEventsParamsComponentWindowsUserName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.97,FluidFS-MIB::fluidFSEventsParamsComponentUnixUserName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.98,FluidFS-MIB::fluidFSEventsParamsComponentSourceFSIDName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.99,FluidFS-MIB::fluidFSEventsParamsComponentDestinationFSIDName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.15.100,FluidFS-MIB::fluidFSEventsParamsComponentDSIDPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.16,FluidFS-MIB::fluidFSEventsParamsSupportShell,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.16.1,FluidFS-MIB::fluidFSEventsParamsSupportShellNode,OCTET,read-only,,current,,Node name
.1.3.6.1.4.1.674.11000.2000.200.21.16.2,FluidFS-MIB::fluidFSEventsParamsSupportShellCommand,OCTET,read-only,,current,,Command executed in support shell
.1.3.6.1.4.1.674.11000.2000.200.21.16.3,FluidFS-MIB::fluidFSEventsParamsSupportShellUserName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.17,FluidFS-MIB::fluidFSEventsParamsAuditing,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.17.1,FluidFS-MIB::fluidFSEventsParamsAuditingU,OCTET,read-only,,current,,User ID as seen from Samba - TUID. Will be translated to username by 'tuid2name' translator automatically
.1.3.6.1.4.1.674.11000.2000.200.21.17.2,FluidFS-MIB::fluidFSEventsParamsAuditingD,OCTET,read-only,,current,,DSID (internal filesystem ID) of file or directory. Use dsid2name utility to translate dsid to path.
.1.3.6.1.4.1.674.11000.2000.200.21.17.3,FluidFS-MIB::fluidFSEventsParamsAuditingN,INTEGER,read-only,,current,,NAS Volume ID (volume ID, i.e. FSID uint32 value). Will be translated to volume name by translator
.1.3.6.1.4.1.674.11000.2000.200.21.17.4,FluidFS-MIB::fluidFSEventsParamsAuditingDesiredCifsAccessMask,INTEGER,read-only,,current,,Desired access mask
.1.3.6.1.4.1.674.11000.2000.200.21.17.5,FluidFS-MIB::fluidFSEventsParamsAuditingName,OCTET,read-only,,current,,Name
.1.3.6.1.4.1.674.11000.2000.200.21.17.6,FluidFS-MIB::fluidFSEventsParamsAuditingUName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.17.7,FluidFS-MIB::fluidFSEventsParamsAuditingNName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.17.8,FluidFS-MIB::fluidFSEventsParamsAuditingDPath,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.17.9,FluidFS-MIB::fluidFSEventsParamsAuditingDesiredCifsAccessMaskName,OCTET,read-only,,current,,
.1.3.6.1.4.1.674.11000.2000.200.21.18,FluidFS-MIB::fluidFSEventsParamsUpgrade,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.21.18.1,FluidFS-MIB::fluidFSEventsParamsUpgradeServicePackName,OCTET,read-only,,current,,File name of the Service Pack
.1.3.6.1.4.1.674.11000.2000.200.22,FluidFS-MIB::fluidFSEventsGeneralParams,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.22.1,FluidFS-MIB::sysName,OCTET,read-only,,current,,General system name
.1.3.6.1.4.1.674.11000.2000.200.23,FluidFS-MIB::fluidFSGeneralEvents,,,,,,
.1.3.6.1.4.1.674.11000.2000.200.23.1,FluidFS-MIB::fluidFSCluOK,,,,,,This trap will be sent any time the condition of the cluster
.1.3.6.1.4.1.674.11000.2000.200.23.2,FluidFS-MIB::fluidFSCluDegraded,,,,,,This trap will be sent any time the condition of the cluster
.1.3.6.1.4.1.674.11000.2000.200.23.3,FluidFS-MIB::fluidFSCluFailed,,,,,,This trap will be sent any time the condition of the cluster
.1.3.6.1.4.1.674.11000.2000.200.23.4,FluidFS-MIB::fluidFSCluNodeOK,,,,,,This trap will be sent any time the condition of a node in
.1.3.6.1.4.1.674.11000.2000.200.23.5,FluidFS-MIB::fluidFSCluNodeDegraded,,,,,,This trap will be sent any time the condition of a node in
.1.3.6.1.4.1.674.11000.2000.200.23.6,FluidFS-MIB::fluidFSCluNodeFailed,,,,,,This trap will be sent any time the condition of a node in
.1.3.6.1.4.1.674.11000.2000.200.23.7,FluidFS-MIB::fluidFSCluResourceOK,,,,,,This trap will be sent any time the condition of a cluster
.1.3.6.1.4.1.674.11000.2000.200.23.8,FluidFS-MIB::fluidFSCluResourceDegraded,,,,,,This trap will be sent any time the condition of a cluster
.1.3.6.1.4.1.674.11000.2000.200.23.9,FluidFS-MIB::fluidFSCluResourceFailed,,,,,,This trap will be sent any time the condition of a cluster
.1.3.6.1.4.1.674.11000.2000.200.23.14,FluidFS-MIB::fluidFSGenNormalEvent,,,,,,This trap will be sent for normal events.
.1.3.6.1.4.1.674.11000.2000.200.23.15,FluidFS-MIB::fluidFSGenMinorEvent,,,,,,This trap will be sent for minor events.
.1.3.6.1.4.1.674.11000.2000.200.23.16,FluidFS-MIB::fluidFSGenMajorEvent,,,,,,This trap will be sent for major events.
.1.3.6.1.4.1.674.11000.2000.200.23.17,FluidFS-MIB::fluidFSGenCriticalEvent,,,,,,This trap will be sent for critical events.
.1.3.6.1.4.1.674.11000.2000.200.23.18,FluidFS-MIB::fluidFSAntiVirusEvent,,,,,,The antivirus software on or connected to system detected a virus.
.1.3.6.1.4.1.674.11000.2000.200.100,FLUIDFS-MIB::fluidFSMIBIdentity,,,,,,FluidFS Snmp read interface..  Copyright (c) 2004-2013 by Dell, Inc.  All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc. 
.1.3.6.1.4.1.674.11000.5000,DELLEMC-OS10-SMI-MIB::networking,,,,,,
.1.3.6.1.4.1.674.11000.5000.100,DELLEMC-OS10-SMI-MIB::os10,,,,,,Dell EMC Networking OS10 subtree's OID.
.1.3.6.1.4.1.674.11000.5000.100.1,DELLEMC-OS10-TC-MIB::os10TextualConventionsMib,,,,,,The Textual Convention of Dell EMC Networking OS10 MIB.
.1.3.6.1.4.1.674.11000.5000.100.2,DELLEMC-OS10-PRODUCTS-MIB::os10Products,,,,,,This mib module defines system Object Identifier values for sysObjectID.0 for network elements manufactured and sold by Dell EMC Networking.
.1.3.6.1.4.1.674.11000.5000.100.2.1,DELLEMC-OS10-PRODUCTS-MIB::os10SSeriesProducts,,,,,,This object identifier roots Dell EMC Networking OS10 S-Series product object identifiers.
.1.3.6.1.4.1.674.11000.5000.100.2.1.1,DELLEMC-OS10-PRODUCTS-MIB::s6000on,,,,,,Dell EMC Networking OS10 S6000 ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.2,DELLEMC-OS10-PRODUCTS-MIB::s4048on,,,,,,Dell EMC Networking OS10 S4048 ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.3,DELLEMC-OS10-PRODUCTS-MIB::s4048Ton,,,,,,Dell EMC Networking OS10 S4048T ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.4,DELLEMC-OS10-PRODUCTS-MIB::s3048on,,,,,,Dell EMC Networking OS10 S3048 ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.5,DELLEMC-OS10-PRODUCTS-MIB::s6010on,,,,,,Dell EMC Networking 0S S6010 ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.6,DELLEMC-OS10-PRODUCTS-MIB::s4148Fon,,,,,,Dell EMC Networking OS10 S4148F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.7,DELLEMC-OS10-PRODUCTS-MIB::s4128Fon,,,,,,Dell EMC Networking OS10 S4128F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.8,DELLEMC-OS10-PRODUCTS-MIB::s4148Ton,,,,,,Dell EMC Networking OS10 S4148T ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.9,DELLEMC-OS10-PRODUCTS-MIB::s4128Ton,,,,,,Dell EMC Networking OS10 S4128T ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.10,DELLEMC-OS10-PRODUCTS-MIB::s4148FEon,,,,,,Dell EMC Networking OS10 S4148FE ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.11,DELLEMC-OS10-PRODUCTS-MIB::s4148Uon,,,,,,Dell EMC Networking OS10 S4148U ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.12,DELLEMC-OS10-PRODUCTS-MIB::s4200on,,,,,,Deprecated: Dell EMC Networking OS10 S4200 ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.13,DELLEMC-OS10-PRODUCTS-MIB::s5148Fon,,,,,,Dell EMC Networking OS10 S5148F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.14,DELLEMC-OS10-PRODUCTS-MIB::s4248FBon,,,,,,Dell EMC Networking OS10 S4248FB ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.15,DELLEMC-OS10-PRODUCTS-MIB::s4248FBLon,,,,,,Dell EMC Networking OS10 S4248FBL ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.16,DELLEMC-OS10-PRODUCTS-MIB::s4112Fon,,,,,,Dell EMC Networking OS10 S4112F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.17,DELLEMC-OS10-PRODUCTS-MIB::s4112Ton,,,,,,Dell EMC Networking OS10 S4112T ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.18,DELLEMC-OS10-PRODUCTS-MIB::s5212Fon,,,,,,Dell EMC Networking OS10 S5212F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.19,DELLEMC-OS10-PRODUCTS-MIB::s5224Fon,,,,,,Dell EMC Networking OS10 S5224F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.20,DELLEMC-OS10-PRODUCTS-MIB::s5232Fon,,,,,,Dell EMC Networking OS10 S5232F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.21,DELLEMC-OS10-PRODUCTS-MIB::s5248Fon,,,,,,Dell EMC Networking OS10 S5248F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.1.22,DELLEMC-OS10-PRODUCTS-MIB::s5296Fon,,,,,,Dell EMC Networking OS10 S5296F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.2,DELLEMC-OS10-PRODUCTS-MIB::os10MSeriesProducts,,,,,,This object identifier roots Dell EMC Networking OS10 M-Series product object identifiers.
.1.3.6.1.4.1.674.11000.5000.100.2.2.1,DELLEMC-OS10-PRODUCTS-MIB::mx5108Non,,,,,, Dell EMC Networking OS10 MX5108N-ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.2.2,DELLEMC-OS10-PRODUCTS-MIB::mx9116Non,,,,,, Dell EMC Networking OS10 MX9116N-ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.3,DELLEMC-OS10-PRODUCTS-MIB::os10ZSeriesProducts,,,,,,This object identifier roots Dell EMC Networking OS10 Z-Series product object identifiers.
.1.3.6.1.4.1.674.11000.5000.100.2.3.1,DELLEMC-OS10-PRODUCTS-MIB::z9100on,,,,,,Dell EMC Networking OS10 Z9100 ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.3.2,DELLEMC-OS10-PRODUCTS-MIB::z9264Fon,,,,,,Dell EMC Networking OS10 Z9264F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.3.3,DELLEMC-OS10-PRODUCTS-MIB::z9232Fon,,,,,,Dell EMC Networking OS10 Z9232F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.3.4,DELLEMC-OS10-PRODUCTS-MIB::z9332Fon,,,,,,Dell EMC Networking OS10 Z9332F ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.2.4,DELLEMC-OS10-PRODUCTS-MIB::os10NSeriesProducts,,,,,,This object identifier roots Dell EMC Networking OS10 N-Series product object identifiers.
.1.3.6.1.4.1.674.11000.5000.100.2.4.1,DELLEMC-OS10-PRODUCTS-MIB::n3248TEon,,,,,, Dell EMC Networking OS10 N3248TE-ON access switch.
.1.3.6.1.4.1.674.11000.5000.100.4,DELLEMC-OS10-CHASSIS-MIB::os10ChassisMib,,,,,,Dell EMC Networking OS10 Chassis MIB.
.1.3.6.1.4.1.674.11000.5000.100.4.1,DELLEMC-OS10-CHASSIS-MIB::os10SysObject,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.4.1.1,DELLEMC-OS10-CHASSIS-MIB::os10ChassisObject,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.1,DELLEMC-OS10-CHASSIS-MIB::os10NumChassis,Unsigned32,read-only,,current,,The total number of chassis configured on the cluster.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.2,DELLEMC-OS10-CHASSIS-MIB::os10MaxNumChassis,Unsigned32,read-only,,current,,Indicates the maximum allowed chassis configurable on the cluster.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3,DELLEMC-OS10-CHASSIS-MIB::os10ChassisTable,,not-accessible,,current,,A list of chassis in a cluster. The chassis table contains the information of  each chassis in the cluster.  
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1,DELLEMC-OS10-CHASSIS-MIB::os10ChassisEntry,,not-accessible,os10ChassisIndex,current,,A list of chassis entries containing information  for the chassis. 
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.1,DELLEMC-OS10-CHASSIS-MIB::os10ChassisIndex,Unsigned32,not-accessible,,current,,A unique index for each chassis within  the cluster. This value is the chassisId assigned to the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.2,DELLEMC-OS10-CHASSIS-MIB::os10ChassisType,INTEGER,read-only,,current,s6000on(1):s4048on(2):s4048Ton(3):s3048on(4):s6010on(5):s4148Fon(6):s4128Fon(7):s4148Ton(8):s4128Ton(9):s4148FEon(10):s4148Uon(11):s4200on(12):mx5108Non(13):mx9116Non(14):s5148Fon(15):z9100on(16):s4248FBon(17):s4248FBLon(18):s4112Fon(19):s4112Ton(20):z9264Fon(21):z9224Fon(22):s5212Fon(23):s5224Fon(24):s5232Fon(25):s5248Fon(26):s5296Fon(27):z9332Fon(28):n3248TEon(29):unknown(9999),The Dell EMC Networking Model number of the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.3,DELLEMC-OS10-CHASSIS-MIB::os10ChassisMacAddr,OCTET,read-only,,current,,A 6-octet MAC Address assigned to this chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.4,DELLEMC-OS10-CHASSIS-MIB::os10ChassisPartNum,OCTET,read-only,,current,,The chassis manufacturer's part number.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.5,DELLEMC-OS10-CHASSIS-MIB::os10ChassisPPID,OCTET,read-only,,current,,The chassis manufacturer's PPID.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.6,DELLEMC-OS10-CHASSIS-MIB::os10ChassisHwRev,OCTET,read-only,,current,,The chassis hardware revision number.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.7,DELLEMC-OS10-CHASSIS-MIB::os10ChassisServiceTag,OCTET,read-only,,current,,The chassis's service tag.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.8,DELLEMC-OS10-CHASSIS-MIB::os10ChassisExpServiceCode,OCTET,read-only,,current,,The chassis's express service code.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.9,DELLEMC-OS10-CHASSIS-MIB::os10ChassisNumFanTrays,Unsigned32,read-only,,current,,Number of fan trays in the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.10,DELLEMC-OS10-CHASSIS-MIB::os10ChassisNumPowerSupplies,Unsigned32,read-only,,current,,Number of power supplies in the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.11,DELLEMC-OS10-CHASSIS-MIB::os10ChassisTemp,Integer32,read-only,,current,,Temperature of the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.12,DELLEMC-OS10-CHASSIS-MIB::os10ChassisProductBase,OCTET,read-only,,current,,The solution id product base
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.13,DELLEMC-OS10-CHASSIS-MIB::os10ChassisProductSN,OCTET,read-only,,current,,The solution id product serial number
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.14,DELLEMC-OS10-CHASSIS-MIB::os10ChassisProductPN,OCTET,read-only,,current,,The solution id product part number
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4,DELLEMC-OS10-CHASSIS-MIB::os10CardTable,,not-accessible,,current,,A list of line cards resident in the chassis. This table contains the information on each RPM and linecards in the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1,DELLEMC-OS10-CHASSIS-MIB::os10CardEntry,,not-accessible,os10ChassisIndex:os10CardIndex,current,,Entry for each card in the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.1,DELLEMC-OS10-CHASSIS-MIB::os10CardIndex,Unsigned32,not-accessible,,current,,A unique index for each card in the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.2,DELLEMC-OS10-CHASSIS-MIB::os10CardType,INTEGER,read-only,,current,notPresent(0):s6000on(1):s4048on(2):s4048Ton(3):s3048on(4):s6010on(5):s4148Fon(6):s4128Fon(7):s4148Ton(8):s4128Ton(9):s4148FEon(10):s4148Uon(11):s4200on(12):mx5108Non(13):mx9116Non(14):s5148Fon(15):z9100on(16):s4248FBon(17):s4248FBLon(18):s4112Fon(19):s4112Ton(20):z9264Fon(21):z9232Fon(22):s5212Fon(23):s5224Fon(24):s5232Fon(25):s5248Fon(26):s5296Fon(27):z9332Fon(28):n3248TEon(29):unknown(9999),Card's type.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.3,DELLEMC-OS10-CHASSIS-MIB::os10CardDescription,OCTET,read-only,,current,,A short description of the card.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.4,DELLEMC-OS10-CHASSIS-MIB::os10CardStatus,INTEGER,read-only,,current,ready(1):cardMisMatch(2):cardProblem(3):diagMode(4):cardAbsent(5):offline(6),The current operational state of the card.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.5,DELLEMC-OS10-CHASSIS-MIB::os10CardTemp,Integer32,read-only,,current,,Temperature of the card.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.6,DELLEMC-OS10-CHASSIS-MIB::os10CardPartNum,OCTET,read-only,,current,,The card's part number
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.7,DELLEMC-OS10-CHASSIS-MIB::os10CardPPID,OCTET,read-only,,current,,The card's PPID.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.8,DELLEMC-OS10-CHASSIS-MIB::os10CardHwRev,OCTET,read-only,,current,,The card's manufacturer hardware revision number.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.9,DELLEMC-OS10-CHASSIS-MIB::os10CardServiceTag,OCTET,read-only,,current,,The card's service tag.
.1.3.6.1.4.1.674.11000.5000.100.4.1.1.4.1.10,DELLEMC-OS10-CHASSIS-MIB::os10CardExpServiceCode,OCTET,read-only,,current,,The card's express service code.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2,DELLEMC-OS10-CHASSIS-MIB::os10SystemComponent,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyTable,,not-accessible,,current,,A list of power supplies resident  in the device.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyEntry,,not-accessible,os10PowerSupplyIndex,current,,A power supply entry provides all attributes of  that power supply.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.1,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyIndex,Unsigned32,not-accessible,,current,,The unique index of the power supply.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.2,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyDevice,INTEGER,read-only,,current,chassis(1):stack(2):rpm(3):supervisor(4):linecard(5),Identify the type of device the power supply unit resides (chassis,line card etc..)
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.3,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyDeviceIndex,Unsigned32,read-only,,current,,A unique value indentifying a specific os10PowerSupplyDeviceType.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.4,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7):failed(8),The status of the power supply.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.5,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyType,INTEGER,read-only,,current,unknown(1):ac(2):dc(3),The type of the power supply.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.6,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyPPID,OCTET,read-only,,current,,The power supply's PPID.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.7,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyServiceTag,OCTET,read-only,,current,,The power supply's service tag.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.1.1.8,DELLEMC-OS10-CHASSIS-MIB::os10PowerSupplyExpServiceCode,OCTET,read-only,,current,,The power supply's express service code.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayTable,,not-accessible,,current,,A list of fan trays resident in the device.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayEntry,,not-accessible,os10FanTrayIndex,current,,A fan entry containing objects for a particular fan tray.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1.1,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayIndex,Unsigned32,not-accessible,,current,,The unique index of the fan tray.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1.2,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayDevice,INTEGER,read-only,,current,chassis(1):stack(2):rpm(3):supervisor(4):linecard(5),Identify the type of device this fan tray unit resides (chassis,line card etc..)
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1.3,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayDeviceIndex,Unsigned32,read-only,,current,,A unique value indentifying a specific os10FanTrayDevice.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1.4,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7):failed(8),The status of the fan tray.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1.5,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayPPID,OCTET,read-only,,current,,The fan tray's PPID.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1.6,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayServiceTag,OCTET,read-only,,current,,The fan tray's service tag.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.2.1.7,DELLEMC-OS10-CHASSIS-MIB::os10FanTrayExpServiceCode,OCTET,read-only,,current,,The fan tray's express service code.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3,DELLEMC-OS10-CHASSIS-MIB::os10FanTable,,not-accessible,,current,,A list of fans installed in the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1,DELLEMC-OS10-CHASSIS-MIB::os10FanEntry,,not-accessible,os10FanIndex,current,,A fan entry containing objects for a particular fan in the chassis.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1.1,DELLEMC-OS10-CHASSIS-MIB::os10FanIndex,Unsigned32,not-accessible,,current,,The unique value for each fan in the device.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1.2,DELLEMC-OS10-CHASSIS-MIB::os10FanDevice,INTEGER,read-only,,current,chassis(1):stack(2):rpm(3):supervisor(4):linecard(5),Identify the type of device this fan resides. (chassis,line card etc..)
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1.3,DELLEMC-OS10-CHASSIS-MIB::os10FanDeviceIndex,Unsigned32,read-only,,current,,A unique value indentifying a specific os10FanDevice.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1.4,DELLEMC-OS10-CHASSIS-MIB::os10FanEntity,INTEGER,read-only,,current,psu(1):fanTray(2),Identify the type of system componet where the fan is installed.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1.5,DELLEMC-OS10-CHASSIS-MIB::os10FanEntitySlot,Unsigned32,read-only,,current,,A unique value indentifying a specific os10FanEntity.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1.6,DELLEMC-OS10-CHASSIS-MIB::os10FanId,Unsigned32,read-only,,current,,A unique value indentifying a specific fan in a specific os10FanEntity.
.1.3.6.1.4.1.674.11000.5000.100.4.1.2.3.1.7,DELLEMC-OS10-CHASSIS-MIB::os10FanOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7):failed(8),The status of the fan.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3,DELLEMC-OS10-CHASSIS-MIB::os10AlmObjects,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1,DELLEMC-OS10-CHASSIS-MIB::os10AlmMibNotifications,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.1,DELLEMC-OS10-CHASSIS-MIB::os10AlmMinorTempHigh,,,,,,The agent generates this trap when the chassis's temperature is exceeding the minor threshold.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.2,DELLEMC-OS10-CHASSIS-MIB::os10AlmMinorTempClr,,,,,,The agent generates this trap when the chassis's temperature is within the minor threshold.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.3,DELLEMC-OS10-CHASSIS-MIB::os10AlmMajorTempHigh,,,,,,The agent generates this trap when the chassis's temperature is exceeding the mjaor threshold.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.4,DELLEMC-OS10-CHASSIS-MIB::os10AlmMajorTempClr,,,,,,The agent generates this trap when the chassis's temperature is within the mjaor threshold.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.5,DELLEMC-OS10-CHASSIS-MIB::os10AlmPowerSupplyDown,,,,,,The agent generates this trap when a power supply is not operational.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.6,DELLEMC-OS10-CHASSIS-MIB::os10AlmPowerSupplyClr,,,,,,The agent generates this trap when a power supply is now operational.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.7,DELLEMC-OS10-CHASSIS-MIB::os10AlmMajorPowerSupply,,,,,,The agent generates this trap when a power supply major alarm is issued.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.8,DELLEMC-OS10-CHASSIS-MIB::os10AlmMajorPowerSupplyClr,,,,,,The agent generates this trap when a power supply major alarm is cleared.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.9,DELLEMC-OS10-CHASSIS-MIB::os10AlmMinorPowerSupply,,,,,,The agent generates this trap when a power supply minor alarm is issued.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.10,DELLEMC-OS10-CHASSIS-MIB::os10AlmMinorPowerSupplyClr,,,,,,The agent generates this trap when a power supply minor alarm is cleared.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.11,DELLEMC-OS10-CHASSIS-MIB::os10AlmFanTrayDown,,,,,,The agent generates this trap when a fan tray is missing or not operational.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.12,DELLEMC-OS10-CHASSIS-MIB::os10AlmFanTrayClr,,,,,,The agent generates this trap when a fan tray is now operational.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.13,DELLEMC-OS10-CHASSIS-MIB::os10AlmMinorFanTray,,,,,,The agent generates this trap when a minor fan tray alarm is issued.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.1.14,DELLEMC-OS10-CHASSIS-MIB::os10AlmMinorFanTrayClr,,,,,,The agent generates this trap when a theminor fan tray alarm is cleared.
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.2,DELLEMC-OS10-CHASSIS-MIB::os10AlmVariable,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.2.1,DELLEMC-OS10-CHASSIS-MIB::os10AlmVarInteger,Integer32,accessible-for-notify,,current,,An generic integer value in the TRAP object
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.2.2,DELLEMC-OS10-CHASSIS-MIB::os10AlmVarString,OCTET,accessible-for-notify,,current,,An generic string value in the TRAP object
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.2.3,DELLEMC-OS10-CHASSIS-MIB::os10AlmVarChassisId,Integer32,accessible-for-notify,,current,,The Chassis ID. For the traps that does not have Chassis information the value will be -1 in the TRAP PDU. For Non-ON based platforms, the value is 0 based and for ON Based platform it is 1 based in the Trap PDU.  
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.2.4,DELLEMC-OS10-CHASSIS-MIB::os10AlmVarSlot,Integer32,accessible-for-notify,,current,,The chassis slot number. For the traps that does not have slot information the value will -1 in the TRAP PDU. 
.1.3.6.1.4.1.674.11000.5000.100.4.1.3.2.5,DELLEMC-OS10-CHASSIS-MIB::os10AlmVarPort,Integer32,accessible-for-notify,,current,,The chassis port number. For the traps that does not have port information the value will -1 in the TRAP PDU. 
.1.3.6.1.4.1.674.11000.5000.100.5,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityMib,,,,,,The Mib module for managing Dell Networking L2 Port Security feature.
.1.3.6.1.4.1.674.11000.5000.100.5.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityMibObjects,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.5.1.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalObjects,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.5.1.1.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalEnable,INTEGER,read-write,,current,true(1):false(2),This object is used to enable or disable  port security feature globally on the device.
.1.3.6.1.4.1.674.11000.5000.100.5.1.1.2,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalTotalSecureAddresses,Integer32,read-only,,current,,The total number of MAC addresses secured in the device.
.1.3.6.1.4.1.674.11000.5000.100.5.1.1.3,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalTotalSecureDynamicAddresses,Integer32,read-only,,current,,The total number of secure dynamic MAC addresses in the device.
.1.3.6.1.4.1.674.11000.5000.100.5.1.1.4,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalTotalSecureStickyAddresses,Integer32,read-only,,current,,The total number of secure sticky MAC addresses in the device.
.1.3.6.1.4.1.674.11000.5000.100.5.1.1.5,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalTotalSecureStaticAddresses,Integer32,read-only,,current,,The total number of secure static MAC addresses in the device.
.1.3.6.1.4.1.674.11000.5000.100.5.1.1.6,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalClearSecureMacAddresses,INTEGER,read-write,,current,none(0):dynamic(1):sticky(2):all(3),This object is used to delete all the secure MAC addresses in the device based on the specified type.
.1.3.6.1.4.1.674.11000.5000.100.5.1.1.7,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalResetViolation,INTEGER,read-write,,current,none(0):macLimitViolation(1):stmvViolation(2),This object is used to reset the selected violation type
.1.3.6.1.4.1.674.11000.5000.100.5.1.2,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityInterfaceObjects,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfConfigTable,,not-accessible,,current,,A table for Port Security configuration entries.  The number of entries is determined by the number of  interfaces in the system that can support the  port security feature.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfConfigEntry,,not-accessible,os10PortSecurityIfIndex,current,,Entry containing port security information for a  particular interface.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfIndex,Integer32,not-accessible,,current,,Index to this table. 
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.2,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfPortSecurityEnable,INTEGER,read-write,,current,true(1):false(2),This Mib object specifies if the port  security feature is enabled or not on an interface.  The value of this object has no effect when the value of os10PortSecurityGlobalEnable is set to 'false'.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.3,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfViolationStatus,INTEGER,read-only,,current,normal(1):macLearnLimitErrDisable(2):stationMoveErrDisable(3),This object represents the port security status of an interface. normal(1) - This indicates port is operating normally without any violation. macLearnLimitErrDisable(2) - This indicates that the port is shutdown due to mac learn limit violation when the object  os10PortSecurityIfMacViolationAction is of type 'shutdown'. stationMoveErrDisable(3) - This indicates that the port is shutdown due to station move violation  when the object os10PortSecurityIfStmvViolationAction is of type 'shutdownOrig' or  'shutdownOffending' or 'shutdownBoth'.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.4,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfSecureMacLearnLimit,Unsigned32,read-write,,current,,The maximum number of MAC addresses to be secured on the interface. User can secure a minimum of one and maximum of 3072 mac addresses on a port.  i.e set operation is allowed only with in range 1-3072. If the newly configured mac learning limit value is smaller than already learnt secure MAC addresses, then all the secure MAC addresses learnt so far (secure sticky or secure dynamic) will be flushed. In case, total  number of secure static mac addresses (configured) count is  greater than newly specified mac learn limit, configuration  will be rejected. Administrator has to delete the extra secure  static addresses or mac learn limit should be modified to accomodate  existing secure static mac addresses. User can remove the mac learing limit  restriction by setting value 4294967295.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.5,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfStationMoveEnable,INTEGER,read-write,,current,true(1):false(2),This object is used to enable or disable station movement on the dynamically secured mac addresses learnt on the interface. By default, this is set to false. It is not possible to enable the station movement on a port with sticky feature enabled
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.6,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfMacViolationAction,INTEGER,read-write,,current,drop(1):dropAndNotify(2):shutdown(3):forward(4),Determines the action to be taken when mac limit violation occurs in the system. drop(1) - No further MAC learning is allowed on the interface. Packets received with a source MAC address which is not in the secured MAC address list will be dropped. dropAndNotify(2) - No further MAC learning is allowed on the interface and a syslog message or an event is emitted to notify  about port security violation. shutdown(3) - The interface will be shut down. forward(4) - No further MAC learning is allowed on the interface. Packets received with a source MAC address which is not in the secured MAC address list will be flooded or forwarded.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.7,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfStmvViolationAction,INTEGER,read-write,,current,drop(1):dropAndNotify(2):shutdownOrigPort(3):shutDownOffendingPort(4):shutdownBoth(5),Determines the action to be taken when a secure dynamic mac address move violation occurs drop(1) - The MAC address that triggered the violation shall not be learned on the new port (offending port). The packets that triggered the violation shall be dropped. dropAndNotify(2) - Raises a syslog to notify about station movement violation. The log will contain MAC causing violation, vlanId, original interface name and offending interface name. shutdownOrigPort(3) - The original interface on which MAC is learnt will be shutdown. shutdownOffendigPort(4) - The offending interface causing  station move will be shutdown.  shutdowBoth(5) - Both the original and offending interfaces will be shutdown.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.8,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfStickyEnable,INTEGER,read-write,,current,true(1):false(2),Set to 'true' to enable and 'false' to disable Sticky port security feature on this interface. Enabling this feature allows the  device to secure learnt MAC addresses on this interface permanently.  In order to remove the sticky addresses on this interface, user has to  manually delete the sticky MAC address(es) or disable the sticky feature itself.  Manual deletion of all addresses can be accomplished by  os10PortSecurityIfClearSecureMacAddresses object. It is possible to enable sticky feature on a port only if mac learning limit restriction  is enabled with os10PortSecurityIfSecureMacLearnLimit.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.9,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfClearSecureMacAddresses,INTEGER,read-write,,current,none(0):dynamic(1):sticky(2):all(3),This object is used to delete secure MAC addresses based on the specified type.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.10,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfSecureMacAgeEnable,INTEGER,read-write,,current,true(1):false(2),This object is used to enable aging of  the dynamically secured mac addresses learnt  on the interface. Sticky and static macs will  never age out. It is not possible to enable aging on a port on which sticky feature is enabled. By default, this is set to false.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.11,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfTotalSecureAddresses,Integer32,read-only,,current,,The total number of secured MAC addresses learnt (dynamic or stickt) 
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.12,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfTotalSecureDynamicAddresses,Integer32,read-only,,current,,The total number of secure dynamic MAC addresses learnt on a particular interface.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.13,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfTotalSecureStickyAddresses,Integer32,read-only,,current,,The total number of secure sticky MAC addresses learnt on a particular interface.
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.14,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfTotalSecureStaticAddresses,Integer32,read-only,,current,,The total number of secure static MAC addresses configured on a particular interface.
.1.3.6.1.4.1.674.11000.5000.100.5.1.3,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityMacObjects,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.5.1.3.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacAddrTable,,not-accessible,,current,,A table containing the list of secure MAC addresses.
.1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacAddrEntry,,not-accessible,os10PortSecuritySecureMacVlanId:os10PortSecuritySecureMacAddress,current,,Entry containing secure MAC address  information for a particular interface.
.1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacVlanId,Unsigned32,not-accessible,,current,,This is the vlan on which the os10PortSecuritySecureMacAddress is configured or learnt.
.1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.2,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacAddress,OCTET,not-accessible,,current,,This is a secure MAC address configured or learnt on an interface.
.1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.3,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacIfIndex,Integer32,read-only,,current,,This is the interface on which the os10PortSecuritySecureMacAddress is configured or learnt.
.1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.4,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacAddrType,INTEGER,read-only,,current,static(1):dynamic(2):sticky(3),This object indicates if the secure MAC address is a configured 'static' or learnt 'dynamic' or learnt and retained across reboots 'sticky'.
.1.3.6.1.4.1.674.11000.5000.100.5.2,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityMibConformance,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.5.2.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityCompliances,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.5.2.1.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityMibConform,,,,,,The compliance statement for the Dell Networking OS Port Security Mib.
.1.3.6.1.4.1.674.11000.5000.100.5.2.2,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGroups,,,,,,
.1.3.6.1.4.1.674.11000.5000.100.5.2.2.1,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityGlobalGroup,,,,,,A set of global objects for use with the Port Security feature.
.1.3.6.1.4.1.674.11000.5000.100.5.2.2.2,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityInterfaceGroup,,,,,,A set of interface level objects for use with the Port Security feature.
.1.3.6.1.4.1.674.11000.5000.100.5.2.2.3,DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacAddrGroup,,,,,,Static secure MAC addresss configuration parameters on an interface.
.1.3.6.1.4.1.674.11000.5000.200,DELLEMC-OS10-SMI-MIB::os10Experiment,,,,,,Dell EMC Networking OS10Experiment subtree's OID.
.1.3.6.1.4.1.674.11000.5000.200.1,DELLEMC-OS10-BGP4V2-MIB::os10Bgp4V2Mib,,,,,,The MIB module for the BGP-4 protocol.
.1.3.6.1.4.1.674.11000.5000.200.1.0,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2Notifications,,,,,,
.1.3.6.1.4.1.674.11000.5000.200.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2Objects,,,,,,
.1.3.6.1.4.1.674.11000.5000.200.1.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2DiscontinuityTable,,not-accessible,,current,,Table of BGP-4 discontinuities. Discontinuities that have external visibility occur on a per-BGP instance basis. Transitions by a given BGP peer will result in a consistent BGP view within that instance and thus do not represent a discontinuity from a protocol standpoint.
.1.3.6.1.4.1.674.11000.5000.200.1.1.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2DiscontinuityEntry,,not-accessible,os10bgp4V2PeerInstance,current,,Entry repsenting information about a discontinuity event for a given BGP instance.
.1.3.6.1.4.1.674.11000.5000.200.1.1.1.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2DiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime at the most recent occasion at which this BGP management instance has suffered a discontinuity.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerTable,,not-accessible,,current,,BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerEntry,,not-accessible,os10bgp4V2PeerInstance:os10bgp4V2PeerRemoteAddrType:os10bgp4V2PeerRemoteAddr,current,,Entry containing information about the connection with a remote BGP peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerInstance,Unsigned32,not-accessible,,current,,The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes routers running BGP/MPLS IP Virtual Private Networks. Implementations that do not support multiple routing instances should return 1 for this object.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLocalAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address family of the local end of the peering session.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.3,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLocalAddr,OCTET,read-only,,current,,The local IP address of this entry's BGP connection. An implementation is required to support IPv4 peering sessions in which case the length of this object is 4. An implementation MAY support IPv6 peering sessions in which case the length of this object is 16. IPv6 link-local peering sessions MAY be supported by this MIB. In this case the length of this object is 20.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.4,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerRemoteAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address family of the remote end of the peering session. An implementation is required to support IPv4 peering sessions in which case the length of this object is 4. An implementation MAY support IPv6 peering sessions in which case the length of this object is 16. IPv6 link-local peering sessions MAY be supported by this MIB. In this case the length of this object is 20.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.5,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerRemoteAddr,OCTET,not-accessible,,current,,The remote IP address of this entry's BGP peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.6,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLocalPort,Unsigned32,read-only,,current,,The local port for the TCP connection between the BGP peers.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.7,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLocalAs,Unsigned32,read-only,,current,,Some implementations of BGP can represent themselves as multiple ASes. This is the AS that this peering session is representing itself as to the remote peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.8,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLocalIdentifier,OCTET,read-only,,current,,The BGP Identifier of the local system for this peering session. It is REQUIRED that all os10bgp4V2PeerLocalIdentifier values for the same os10bgp4V2PeerInstance be identical.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.9,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerRemotePort,Unsigned32,read-only,,current,,The remote port for the TCP connection between the BGP peers. Note that the objects os10bgp4V2PeerLocalAddr, os10bgp4V2PeerLocalPort, os10bgp4V2PeerRemoteAddr and os10bgp4V2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table, or even the ipv6 TCP MIB as in RFC 4022.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.10,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerRemoteAs,Unsigned32,read-only,,current,,The remote autonomous system number received in the BGP OPEN message.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.11,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerRemoteIdentifier,OCTET,read-only,,current,,The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the os10bgp4V2PeerState is in the openconfirm or the established state.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.12,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerAdminStatus,INTEGER,read-only,,current,halted(1):running(2),Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The os10bgp4V2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.13,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerState,INTEGER,read-only,,current,idle(1):connect(2):active(3):opensent(4):openconfirm(5):established(6),The BGP peer connection state.
.1.3.6.1.4.1.674.11000.5000.200.1.1.2.1.14,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerDescription,OCTET,read-only,,current,,A user configured description identifying this peer. When this object is not the empty string, this object SHOULD contain a description that is unique within a given BGP instance for this peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerErrorsTable,,not-accessible,,current,,On a per-peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerErrorsEntry,,not-accessible,,current,,Each entry contains information about errors sent and received for a particular BGP peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorCodeReceived,Unsigned32,read-only,,current,,The last error code received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorSubCodeReceived,Unsigned32,read-only,,current,,The last subcode received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.3,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorReceivedTime,TimeTicks,read-only,,current,,The timestamp that the last NOTIFICATION was received from this peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.4,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorReceivedText,OCTET,read-only,,current,,This object contains an implementation specific explanation of the error that was reported.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.5,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorReceivedData,OCTET,read-only,,current,,The last error code's data seen by this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this data may be truncated.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.6,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorCodeSent,Unsigned32,read-only,,current,,The last error code sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.7,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorSubCodeSent,Unsigned32,read-only,,current,,The last subcode sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.8,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorSentTime,TimeTicks,read-only,,current,,The timestamp that the last NOTIFICATION was sent to this peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.9,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorSentText,OCTET,read-only,,current,,This object contains an implementation specific explanation of the error that is being reported.
.1.3.6.1.4.1.674.11000.5000.200.1.1.3.1.10,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerLastErrorSentData,OCTET,read-only,,current,,The last error code's data sent to this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this data may be truncated.
.1.3.6.1.4.1.674.11000.5000.200.1.1.4,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerEventTimesTable,,not-accessible,,current,,A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the established state.
.1.3.6.1.4.1.674.11000.5000.200.1.1.4.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerEventTimesEntry,,not-accessible,,current,,Each row contains a set of statistics about time spent and events encountered in the peer session established state.
.1.3.6.1.4.1.674.11000.5000.200.1.1.4.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerFsmEstablishedTime,Gauge32,read-only,,current,,This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set to zero when a new peer is configured or when the router is booted. If the peer has never reached the established state, the value remains zero.
.1.3.6.1.4.1.674.11000.5000.200.1.1.4.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerInUpdatesElapsedTime,Gauge32,read-only,,current,,Elapsed time (in seconds) since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is set to zero (0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.5,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerConfiguredTimersTable,,not-accessible,,current,,Per peer management data on BGP session timers.
.1.3.6.1.4.1.674.11000.5000.200.1.1.5.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerConfiguredTimersEntry,,not-accessible,,current,,Each entry corresponds to the current state of BGP timers on a given peering session.
.1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerConnectRetryInterval,Unsigned32,read-only,,current,,Time interval (in seconds) for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
.1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerHoldTimeConfigured,Unsigned32,read-only,,current,,Time interval (in seconds) for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker, using the smaller of the values in bgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at least three seconds if it is not zero (0). If the Hold Timer has not been established with the peer this object MUST have a value of zero (0). If the bgpPeerHoldTimeConfigured object has a value of (0), then this object MUST have a value of (0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.3,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAliveConfigured,Unsigned32,read-only,,current,,Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive. A reasonable maximum value for this timer would be one third of that of bgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodic KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
.1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.4,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerMinASOrigInterval,Unsigned32,read-only,,current,,Time interval (in seconds) for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
.1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.5,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerMinRouteAdverInterval,Unsigned32,read-only,,current,,Time interval (in seconds) for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds for EBGP connections and 5 seconds for IBGP connections.
.1.3.6.1.4.1.674.11000.5000.200.1.1.6,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerNegotiatedTimersTable,,not-accessible,,current,,Configured values of per-peer timers are seen in the os10bgp4V2PeerConfiguredTimersTable. Values in this table reflect the current operational values, after negotiation from values derived from initial configuration.
.1.3.6.1.4.1.674.11000.5000.200.1.1.6.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerNegotiatedTimersEntry,,not-accessible,,current,,Each entry reflects a value of the currently operational, negotiated timer as reflected in the Os10Bgp4V2PeerNegotiatedTimersEntry.
.1.3.6.1.4.1.674.11000.5000.200.1.1.6.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerHoldTime,Unsigned32,read-only,,current,,The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and os10bgp4V2PeerHoldTimeConfigured for this peer. If the peer is not in the established state, the value of this object is zero (0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.6.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAlive,Unsigned32,read-only,,current,,Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with os10bgp4V2PeerHoldTime, it has the same proportion as what os10bgp4V2PeerKeepAliveConfigured has when compared with os10bgp4V2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of os10bgp4V2PeerKeepAliveConfigured is zero (0). If the peer is not in the established state, the value of this object is zero (0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.7,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerCountersTable,,not-accessible,,current,,The counters associated with a BGP Peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.7.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerCountersEntry,,not-accessible,,current,,Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session.
.1.3.6.1.4.1.674.11000.5000.200.1.1.7.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerInUpdates,Counter32,read-only,,current,,The number of BGP UPDATE messages received on this connection.
.1.3.6.1.4.1.674.11000.5000.200.1.1.7.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerOutUpdates,Counter32,read-only,,current,,The number of BGP UPDATE messages transmitted on this connection.
.1.3.6.1.4.1.674.11000.5000.200.1.1.7.1.3,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerInTotalMessages,Counter32,read-only,,current,,The total number of messages received from the remote peer on this connection.
.1.3.6.1.4.1.674.11000.5000.200.1.1.7.1.4,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerOutTotalMessages,Counter32,read-only,,current,,The total number of messages transmitted to the remote peer on this connection.
.1.3.6.1.4.1.674.11000.5000.200.1.1.7.1.5,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerFsmEstablishedTransitions,Counter32,read-only,,current,,The total number of times the BGP FSM transitioned into the established state for this peer.
.1.3.6.1.4.1.674.11000.5000.200.1.1.8,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PrefixGaugesTable,,not-accessible,,current,,Additional per-peer, per AFI-SAFI counters for prefixes
.1.3.6.1.4.1.674.11000.5000.200.1.1.8.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PrefixGaugesEntry,,not-accessible,os10bgp4V2PeerInstance:os10bgp4V2PeerRemoteAddrType:os10bgp4V2PeerRemoteAddr:os10bgp4V2PrefixGaugesAfi:os10bgp4V2PrefixGaugesSafi,current,,Entry containing information about a bgp-peers prefix counters.
.1.3.6.1.4.1.674.11000.5000.200.1.1.8.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PrefixGaugesAfi,INTEGER,not-accessible,,current,ipv4(1):ipv6(2),The AFI index of the per-peer, per prefix counters
.1.3.6.1.4.1.674.11000.5000.200.1.1.8.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PrefixGaugesSafi,INTEGER,not-accessible,,current,unicast(1):multicast(2):mpls(4),The SAFI index of the per-peer, per prefix counters
.1.3.6.1.4.1.674.11000.5000.200.1.1.8.1.3,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PrefixInPrefixes,Gauge32,read-only,,current,,The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer. Note that this number does not reflect prefixes that have been discarded due to policy.
.1.3.6.1.4.1.674.11000.5000.200.1.1.8.1.4,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PrefixInPrefixesAccepted,Gauge32,read-only,,current,,The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib.
.1.3.6.1.4.1.674.11000.5000.200.1.1.8.1.5,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PrefixOutPrefixes,Gauge32,read-only,,current,,The number of prefixes for a peer that are installed in that peer's Adj-Ribs-Out.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriTable,,not-accessible,,current,,The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where os10bgp4V2NlriBest is true represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriEntry,,not-accessible,os10bgp4V2PeerInstance:os10bgp4V2NlriAfi:os10bgp4V2NlriSafi:os10bgp4V2NlriPrefixType:os10bgp4V2NlriPrefix:os10bgp4V2NlriPrefixLen:os10bgp4V2PeerRemoteAddrType:os10bgp4V2PeerRemoteAddr:os10bgp4V2NlriIndex,current,,Information about a path to a network.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriIndex,Unsigned32,not-accessible,,current,,This index allows for multiple instances of a base prefix for a certain AFI-SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAfi,INTEGER,not-accessible,,current,ipv4(1):ipv6(2),The address family of the prefix for this NLRI. Note that the AFI is not necessarily equivalent to the an InetAddressType.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.3,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriSafi,INTEGER,not-accessible,,current,unicast(1):multicast(2):mpls(4),The subsequent address family of the prefix for this NLRI
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.4,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriPrefixType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the os10bgp4V2NlriAfi field. Where an appropriate InetAddressType is not available, the value of the object must be unknown(0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.5,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriPrefix,OCTET,not-accessible,,current,,An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by os10bgp4V2NlriPrefixLen. Any bits beyond the length specified by os10bgp4V2NlriPrefixLen are zeroed. An implementation is required to support IPv4 prefixes. In this case, the object length is (0..4). An implementation MAY support IPv6 prefixes. In this case, the object length is (0..16)
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.6,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriPrefixLen,Unsigned32,not-accessible,,current,,Length in bits of the address prefix in the Network Layer Reachability Information field.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.7,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriBest,INTEGER,read-only,,current,true(1):false(2),An indication of whether or not this route was chosen as the best BGP4 route for this destination.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.8,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriCalcLocalPref,Unsigned32,read-only,,current,,The degree of preference calculated by the receiving BGP4 speaker for an advertised route. In the case where this prefix is ineligible, the value of this object will be zero (0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.9,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriOrigin,INTEGER,read-only,,current,igp(1):egp(2):incomplete(3),The ultimate origin of the path information.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.10,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriNextHopAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address family of the address for the border router that should be used to access the destination network.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.11,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriNextHopAddr,OCTET,read-only,,current,,The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet associated with this prefix. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. bgpPathAttrLinkLocalNextHop will contain the linklocal scope nexthop, if it is present. In the case a mechanism is developed to use only a link local nexthop, os10bgp4V2NlriNextHopAddr will contain the link local nexthop.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.12,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriLinkLocalNextHopAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type for IPv6 link local addresses. This is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP implementations that do not support IPv6. When no IPv6 link local nexthop is present, the value of this object should be unknown(0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.13,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriLinkLocalNextHopAddr,OCTET,read-only,,current,,This value contains an IPv6 link local address and is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP implementations that do not support IPv6. When no IPv6 link local nexthop is present, the length of this object should be zero.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.14,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriLocalPrefPresent,INTEGER,read-only,,current,true(1):false(2),This value is true when the LOCAL_PREF value was sent in the UPDATE message.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.15,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriLocalPref,Unsigned32,read-only,,current,,The originating BGP4 speakers degree of preference for an advertised route.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.16,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriMedPresent,INTEGER,read-only,,current,true(1):false(2),This value is true when the MED value was sent in the UPDATE message.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.17,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriMed,Unsigned32,read-only,,current,,This metric is used to discriminate between multiple exit points to an adjacent autonomous system. When the MED value is absent but has a calculated default value, this object will contain the calculated value.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.18,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAtomicAggregate,INTEGER,read-only,,current,true(1):false(2),This value is true when the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.19,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAggregatorPresent,INTEGER,read-only,,current,true(1):false(2),This value is true when the AGGREGATOR path attribute was sent in the UPDATE message.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.20,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAggregatorAS,Unsigned32,read-only,,current,,The AS number of the last BGP4 speaker that performed route aggregation. When os10bgp4V2NlriAggregatorPresent is false, the value of this object should be zero (0).
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.21,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAggregatorAddr,OCTET,read-only,,current,,The IP address of the last BGP4 speaker that performed route aggregation. When os10bgp4V2NlriAggregatorPresent is false, the value of this object should be 0.0.0.0
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.22,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAsPathCalcLength,Unsigned32,read-only,,current,,This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.23,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAsPathString,OCTET,read-only,,current,,This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability. Note that SnmpAdminString is only capable of representing a maximum of 255 characters. This may lead to the string being truncated in the presence of a large AS Path. It is RECOMMENDED that when this object's contents will be truncated that the final 3 octets be reserved for the ellipses string, '...'. os10bgp4V2NlriAsPath may give access to the full AS Path.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.24,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriAsPath,OCTET,read-only,,current,,In order to provide a canonicalized form of the BGP-4 AS_PATH along with the human-readable os10bgp4V2NlriAsPathString, which may be truncated, this object contains the contents of the BGP-4 AS_PATH Path Attribute. This object may be parsed using the rules defined for Four-octet ASes as defined in RFC 4893. RFC 4271, Section 4.3, 'Path Attributes: b) AS_PATH' as amended by RFC 5065, Section 3 defines the general format of the AS_PATH path attribute and its code points. In brief, the AS_PATH is composed of a sequence of AS Segments. Each AS Segment is represented by a triple: <path segment type, path segment length, path segment value>. The path segment type and path segment length fields are one octet in length each. The path segment type field may be one of: 1 - AS_SET (RFC 4721, Section 4.3) 2 - AS_SEQUENCE (RFC 4721, Section 4.3) 3 - AS_CONFED_SEQUENCE (RFC 3065, Section 5) 4 - AS_CONFED_SET (RFC 3065, Section 5) The path segment length field contains the number of ASes (not the number of octets) in the path segment value field. The path segment value field contains one or more AS numbers, each encoded as a 4-octet length field in network byte order. Note that since an SNMP agent may truncate this object to less than its maximum theoretical length of 4072 octets users of this object should be prepared to deal with a truncated and thus malformed AS_PATH. It is RECOMMENDED that when such truncation would occur on the boundary of an encoded AS that the partial AS be discarded from this object and the object's size be adjusted accordingly. Further, it is also RECOMMENDED that when such truncation, either alone or in conjuction with the truncation of a partially encoded AS described previously, would yield an empty path segment value field that the path segment type and path segment length components of the truncated AS_PATH also be discarded and the object's size be adjusted accordingly.
.1.3.6.1.4.1.674.11000.5000.200.1.1.9.1.25,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2NlriPathAttrUnknown,OCTET,read-only,,current,,Path Attributes not understood by this implementation SHOULD be be presented in this object. Those Path Attributes use the type, length, value encoding documented in RFC 4271, Section 4.3, 'Path Attributes'. Note that since an SNMP agent may truncate this object to less than its maximum theoretical length of 4072 octets users of this object should be prepared to deal with a truncated and thus malformed Path Attribute.
.1.3.6.1.4.1.674.11000.5000.200.1.1.10,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2AdjRibsOutTable,,not-accessible,,current,,This table contains on a per-peer basis one or more routes from the os10bgp4V2NlriTable that have been placed in this peer's Adj-Ribs-Out.
.1.3.6.1.4.1.674.11000.5000.200.1.1.10.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2AdjRibsOutEntry,,not-accessible,os10bgp4V2PeerInstance:os10bgp4V2NlriAfi:os10bgp4V2NlriSafi:os10bgp4V2NlriPrefixType:os10bgp4V2NlriPrefix:os10bgp4V2NlriPrefixLen:os10bgp4V2PeerRemoteAddrType:os10bgp4V2PeerRemoteAddr:os10bgp4V2AdjRibsOutIndex,current,,List of BGP routes that have been placed into a peer's Adj-Ribs-Out.
.1.3.6.1.4.1.674.11000.5000.200.1.1.10.1.1,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2AdjRibsOutIndex,Unsigned32,not-accessible,,current,,Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them.
.1.3.6.1.4.1.674.11000.5000.200.1.1.10.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2AdjRibsOutRoute,OBJECT,read-only,,current,,This object points to the route in the os10bgp4V2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process.
.1.3.6.1.4.1.674.11000.5000.200.1.2,DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2Conformance,,,,,,
.1.3.6.1.4.1.3183,DELL-ASF-MIB::wiredformgmt,,,,,,
.1.3.6.1.4.1.3183.1,DELL-ASF-MIB::pet,,,,,,
.1.3.6.1.4.1.3183.1.1,DELL-ASF-MIB::asfPetEvts,,,,,,
.1.3.6.1.4.1.3183.1.1.0,DELL-ASF-MIB::asfPetEvts#,,,,,,
.1.3.6.1.4.1.3183.1.1.0.1001,DELL-ASF-MIB::asfTrapIPMIAlertTest,,,,,,IPMI Alert Configuration Test
.1.3.6.1.4.1.3183.1.1.0.65792,DELL-ASF-MIB::asfTrapUnderTemperatureWarning,,,,,,Under-Temperature Warning (Lower Non-Critical - going low)
.1.3.6.1.4.1.3183.1.1.0.65794,DELL-ASF-MIB::asfTrapUnderTemperature,,,,,,Under-Temperature Problem (Lower Critical - going low)
.1.3.6.1.4.1.3183.1.1.0.65799,DELL-ASF-MIB::asfTrapOverTemperatureWarning,,,,,,Over-Temperature Warning (Upper Non-Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.65801,DELL-ASF-MIB::asfTrapOverTemperature,,,,,,Over-Temperature Problem (Upper Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.65920,DELL-ASF-MIB::asfTrapUnderTemperatureWarningCleared,,,,,,Under-Temperature Warning Cleared
.1.3.6.1.4.1.3183.1.1.0.65922,DELL-ASF-MIB::asfTrapUnderTemperatureCleared,,,,,,Under-Temperature Problem Cleared
.1.3.6.1.4.1.3183.1.1.0.65927,DELL-ASF-MIB::asfTrapOverTemperatureWarningCleared,,,,,,Over-Temperature Warning Cleared
.1.3.6.1.4.1.3183.1.1.0.65929,DELL-ASF-MIB::asfTrapOverTemperatureCleared,,,,,,Over-Temperature Problem Cleared
.1.3.6.1.4.1.3183.1.1.0.1076994,DELL-ASF-MIB::asfTrapSelCleared,,,,,,System Event Log (SEL) Cleared
.1.3.6.1.4.1.3183.1.1.0.1076996,DELL-ASF-MIB::asfTrapSelFull,,,,,,System Event Log (SEL) Full (Logging Disabled)
.1.3.6.1.4.1.3183.1.1.0.12611334,DELL-ASF-MIB::asfTrapSystemPowerExceedsError,,,,,,System Power Exceeds than PSU Wattage (Error)
.1.3.6.1.4.1.3183.1.1.0.12611462,DELL-ASF-MIB::asfTrapSystemPowerExceedsCleared,,,,,,System Power Exceeds Error Cleared
.1.3.6.1.4.1.3183.1.1.0.131328,DELL-ASF-MIB::asfTrapUnderVoltageWarning,,,,,,Under-Voltage Warning (Lower Non Critical - going low)
.1.3.6.1.4.1.3183.1.1.0.131330,DELL-ASF-MIB::asfTrapUnderVoltage,,,,,,Under-Voltage Problem (Lower Critical - going low)
.1.3.6.1.4.1.3183.1.1.0.131335,DELL-ASF-MIB::asfTrapOverVoltageWarning,,,,,,Over-Voltage Warning (Upper Non Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.131337,DELL-ASF-MIB::asfTrapOverVoltage,,,,,,Over-Voltage Problem (Upper Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.131456,DELL-ASF-MIB::asfTrapUnderVoltageWarningCleared,,,,,,Under-Voltage Warning Cleared
.1.3.6.1.4.1.3183.1.1.0.131458,DELL-ASF-MIB::asfTrapUnderVoltageCleared,,,,,,Under-Voltage Problem Cleared
.1.3.6.1.4.1.3183.1.1.0.131463,DELL-ASF-MIB::asfTrapOverVoltageWarningCleared,,,,,,Over-Voltage Warning Cleared
.1.3.6.1.4.1.3183.1.1.0.131465,DELL-ASF-MIB::asfTrapVoltageCleared,,,,,,Over-Voltage Problem Cleared
.1.3.6.1.4.1.3183.1.1.0.13175552,DELL-ASF-MIB::asfTrapInternalDualSDModuleRedundant,,,,,,Internal Dual SD Module is redundant
.1.3.6.1.4.1.3183.1.1.0.13175553,DELL-ASF-MIB::asfTrapInternalDualSDModuleRedundancyLost,,,,,,Internal Dual SD Module redundancy is lost
.1.3.6.1.4.1.3183.1.1.0.13175555,DELL-ASF-MIB::asfTrapInternalDualSDModuleNotRedundant,,,,,,Internal Dual SD Module is not redundant
.1.3.6.1.4.1.3183.1.1.0.131840,DELL-ASF-MIB::asfTrapCriticalDiscreteVoltageCleared,,,,,,Generic Critical Voltage Problem Cleared
.1.3.6.1.4.1.3183.1.1.0.131841,DELL-ASF-MIB::asfTrapCriticalDiscreteVoltage,,,,,,Generic Critical Voltage Problem
.1.3.6.1.4.1.3183.1.1.0.13201152,DELL-ASF-MIB::asfTrapInternalDualSDModulePresent,,,,,,Internal Dual SD Module is present
.1.3.6.1.4.1.3183.1.1.0.13201153,DELL-ASF-MIB::asfTrapInternalDualSDModuleOffline,,,,,,Internal Dual SD Module is offline
.1.3.6.1.4.1.3183.1.1.0.13201154,DELL-ASF-MIB::asfTrapInternalDualSDModuleFailure,,,,,,Failure detected on Internal Dual SD Module
.1.3.6.1.4.1.3183.1.1.0.13201155,DELL-ASF-MIB::asfTrapInternalDualSDModuleWriteProtected,,,,,,Internal Dual SD Module is write protected
.1.3.6.1.4.1.3183.1.1.0.13201280,DELL-ASF-MIB::asfTrapInternalDualSDModuleAbsent,,,,,,Internal Dual SD Module is absent
.1.3.6.1.4.1.3183.1.1.0.13201281,DELL-ASF-MIB::asfTrapInternalDualSDModuleOnline,,,,,,Internal Dual SD Module is online
.1.3.6.1.4.1.3183.1.1.0.13201282,DELL-ASF-MIB::asfTrapInternalDualSDModuleNormal,,,,,,Internal Dual SD Module is operating normally
.1.3.6.1.4.1.3183.1.1.0.13201283,DELL-ASF-MIB::asfTrapInternalDualSDModuleWriteable,,,,,,Internal Dual SD Module is writable
.1.3.6.1.4.1.3183.1.1.0.1379072,DELL-ASF-MIB::asfTrapSDFullRedundancy,,,,,,SD Card redundancy Has Returned to Normal
.1.3.6.1.4.1.3183.1.1.0.1379073,DELL-ASF-MIB::asfTrapSDRedundancyLost,,,,,,SD Card redundancy has been lost
.1.3.6.1.4.1.3183.1.1.0.1379074,DELL-ASF-MIB::asfTrapSDRedundancyDegraded,,,,,,SD Card redundancy has been degraded
.1.3.6.1.4.1.3183.1.1.0.1404928,DELL-ASF-MIB::asfTrapModuleSDCardNotPresent,,,,,,Module SD Card not Present 
.1.3.6.1.4.1.3183.1.1.0.1404932,DELL-ASF-MIB::asfTrapModuleSDCardFailedError,,,,,,Module SD Card Failure Error
.1.3.6.1.4.1.3183.1.1.0.1404935,DELL-ASF-MIB::asfTrapModuleSDWriteProtectWarning,,,,,,Module SD Card Write Protect Warning
.1.3.6.1.4.1.3183.1.1.0.1405056,DELL-ASF-MIB::asfTrapModuleSDCardPresence,,,,,,Module SD Card Present (SD Card Presence Detected)
.1.3.6.1.4.1.3183.1.1.0.196871,DELL-ASF-MIB::asfTrapOverCurrentWarning,,,,,,Over-Current Warning (Upper Non-Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.196999,DELL-ASF-MIB::asfTrapUnderCurrentCleared,,,,,,Under-Current Problem Cleared
.1.3.6.1.4.1.3183.1.1.0.2322176,DELL-ASF-MIB::asfTrapASRTimeout,,,,,,ASR (Automatic System Recovery) Timer Expired
.1.3.6.1.4.1.3183.1.1.0.2322177,DELL-ASF-MIB::asfTrapASROsReset,,,,,,ASR (Automatic System Recovery) Reset Occurred
.1.3.6.1.4.1.3183.1.1.0.2322178,DELL-ASF-MIB::asfTrapASRPowerDown,,,,,,ASR (Automatic System Recovery) Power Down Occurred
.1.3.6.1.4.1.3183.1.1.0.2322179,DELL-ASF-MIB::asfTrapASRPowerCycle,,,,,,ASR (Automatic System Recovery) Power Cycle Occurred
.1.3.6.1.4.1.3183.1.1.0.2322180,DELL-ASF-MIB::asfTrapOverSystemPowerWarning,,,,,,Over-System Power Utilization Warning (Upper Non-Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.2322181,DELL-ASF-MIB::asfTrapOverSystemPowerWarningCleared,,,,,,Over-System Power Utilization Warning Cleared
.1.3.6.1.4.1.3183.1.1.0.2322182,DELL-ASF-MIB::asfTrapOverSystemPowerCritical,,,,,,Over-System Power Utilization Problem (Upper Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.2322183,DELL-ASF-MIB::asfTrapOverSystemPowerCriticalCleared,,,,,,Over-System Power Utilization Problem Cleared
.1.3.6.1.4.1.3183.1.1.0.262400,DELL-ASF-MIB::asfTrapFanSpeedWarning,,,,,,Generic Predictive Fan Failure ( predictive failure asserted )
.1.3.6.1.4.1.3183.1.1.0.262402,DELL-ASF-MIB::asfTrapFanSpeedProblem,,,,,,Generic Critical Fan Failure
.1.3.6.1.4.1.3183.1.1.0.262528,DELL-ASF-MIB::asfTrapFanSPeedWarningCleared,,,,,,Generic Predictive Fan Failure Cleared
.1.3.6.1.4.1.3183.1.1.0.262530,DELL-ASF-MIB::asfTrapFanSPeedProblemCleared,,,,,,Generic Critical Fan Failure Cleared
.1.3.6.1.4.1.3183.1.1.0.264960,DELL-ASF-MIB::asfTrapFanFullRedundancy,,,,,,Fan redundancy Has Returned to Normal
.1.3.6.1.4.1.3183.1.1.0.264961,DELL-ASF-MIB::asfTrapFanRedundancyLost,,,,,,Fan redundancy has been lost
.1.3.6.1.4.1.3183.1.1.0.264962,DELL-ASF-MIB::asfTrapFanRedundancyDegraded,,,,,,Fan redundancy has been degraded
.1.3.6.1.4.1.3183.1.1.0.2715392,DELL-ASF-MIB::asfTrapBatteryLowWarning,,,,,,Battery Low (Predictive Failure)
.1.3.6.1.4.1.3183.1.1.0.2715393,DELL-ASF-MIB::asfTrapBatteryFailure,,,,,,Battery Failure
.1.3.6.1.4.1.3183.1.1.0.2715520,DELL-ASF-MIB::asfTrapBatteryLowWarningCleared,,,,,,Battery Low (Predictive Failure) Cleared
.1.3.6.1.4.1.3183.1.1.0.2715521,DELL-ASF-MIB::asfTrapBatteryFailCleared,,,,,,Battery Failure Cleared
.1.3.6.1.4.1.3183.1.1.0.356096,DELL-ASF-MIB::asfTrapCaseIntrusion,,,,,,Chassis Intrusion - Physical Security Violation
.1.3.6.1.4.1.3183.1.1.0.356224,DELL-ASF-MIB::asfTrapCaseIntrusionCleared,,,,,,Chassis Intrusion (Physical Security Violation) Event Cleared
.1.3.6.1.4.1.3183.1.1.0.460550,DELL-ASF-MIB::asfTrapSMBIOSUncorrectableCPU,,,,,,SM BIOS Uncorrectable CPU-complex Error
.1.3.6.1.4.1.3183.1.1.0.487168,DELL-ASF-MIB::asfTrapCpuIErr,,,,,,CPU Internal Error
.1.3.6.1.4.1.3183.1.1.0.487169,DELL-ASF-MIB::asfTrapCpuThermalTrip,,,,,,CPU Thermal Trip (Over Temperature Shutdown)
.1.3.6.1.4.1.3183.1.1.0.487170,DELL-ASF-MIB::asfTrapCpuBistError,,,,,,CPU BIST (Built In Self Test) Failure
.1.3.6.1.4.1.3183.1.1.0.487173,DELL-ASF-MIB::asfTrapCpuConfigError,,,,,,CPU Configuration Error
.1.3.6.1.4.1.3183.1.1.0.487175,DELL-ASF-MIB::asfTrapCpuPresence,,,,,,CPU Presence (Processor Presence Detected)
.1.3.6.1.4.1.3183.1.1.0.487176,DELL-ASF-MIB::asfTrapCpuDisabled,,,,,,CPU Disabled (Processor Disabled)
.1.3.6.1.4.1.3183.1.1.0.487178,DELL-ASF-MIB::asfTrapCpuThrottle,,,,,,CPU Throttle (Processor Speed Reduced)
.1.3.6.1.4.1.3183.1.1.0.487180,DELL-ASF-MIB::asfTrapCpuCorrectableError,,,,,,CPU correctable error
.1.3.6.1.4.1.3183.1.1.0.487296,DELL-ASF-MIB::asfTrapCpuIErrCleared,,,,,,CPU Internal Error Cleared
.1.3.6.1.4.1.3183.1.1.0.487297,DELL-ASF-MIB::asfTrapCpuThermalTripCleared,,,,,,CPU Thermal Trip (Over Temperature Shutdown) Cleared
.1.3.6.1.4.1.3183.1.1.0.487298,DELL-ASF-MIB::asfTrapCpuBistErrorCleared,,,,,,CPU BIST (Built In Self Test) Failure Cleared
.1.3.6.1.4.1.3183.1.1.0.487301,DELL-ASF-MIB::asfTrapCpuConfigErrorCleared,,,,,,CPU Configuration Error Cleared
.1.3.6.1.4.1.3183.1.1.0.487303,DELL-ASF-MIB::asfTrapCpuNotPresent,,,,,,CPU Not Present (Processor Not Present)
.1.3.6.1.4.1.3183.1.1.0.487304,DELL-ASF-MIB::asfTrapCpuEnabled,,,,,,CPU Enabled (Processor Enabled)
.1.3.6.1.4.1.3183.1.1.0.487306,DELL-ASF-MIB::asfTrapCpuThrottleCleared,,,,,,CPU Throttle Cleared (Normal Processor Speed)
.1.3.6.1.4.1.3183.1.1.0.527104,DELL-ASF-MIB::asfTrapPSFullRedundancy,,,,,,Power Supply Redundancy Has Returned to Normal
.1.3.6.1.4.1.3183.1.1.0.527105,DELL-ASF-MIB::asfTrapPSRedundancyLost,,,,,,Power Supply Redundancy Lost
.1.3.6.1.4.1.3183.1.1.0.527106,DELL-ASF-MIB::asfTrapPSRedundancyDegraded,,,,,,Power Supply Redundancy Degraded
.1.3.6.1.4.1.3183.1.1.0.527107,DELL-ASF-MIB::asfTrapPSNonRedundantSufficientResources,,,,,,Non-redundant:Sufficient Resources from Redundant
.1.3.6.1.4.1.3183.1.1.0.552704,DELL-ASF-MIB::asfTrapPsPresenceDeteced,,,,,,Power Supply Inserted
.1.3.6.1.4.1.3183.1.1.0.552705,DELL-ASF-MIB::asfTrapPsFailure,,,,,,Power Supply Failure
.1.3.6.1.4.1.3183.1.1.0.552706,DELL-ASF-MIB::asfTrapPsPredictiveFailure,,,,,,Power Supply Warning
.1.3.6.1.4.1.3183.1.1.0.552707,DELL-ASF-MIB::asfTrapPsAcLost,,,,,,Power Supply AC Lost
.1.3.6.1.4.1.3183.1.1.0.552710,DELL-ASF-MIB::asfTrapPSUMismatch,,,,,,Power Supply Mismatch (Configuration Error)
.1.3.6.1.4.1.3183.1.1.0.552711,DELL-ASF-MIB::asfTrapSystemPowerExceedsWarning,,,,,,System Power Exceeds than PSU Wattage (Warning)
.1.3.6.1.4.1.3183.1.1.0.552832,DELL-ASF-MIB::asfTrapPsPresenceRemoved,,,,,,Power Supply Removed
.1.3.6.1.4.1.3183.1.1.0.552833,DELL-ASF-MIB::asfTrapPsFailureCleared,,,,,,Power Supply Failure Cleared
.1.3.6.1.4.1.3183.1.1.0.552834,DELL-ASF-MIB::asfTrapPsPredictiveFailureCleared,,,,,,Power Supply Warning Cleared
.1.3.6.1.4.1.3183.1.1.0.552835,DELL-ASF-MIB::asfTrapPsAcBack,,,,,,Power Supply AC Restored
.1.3.6.1.4.1.3183.1.1.0.552838,DELL-ASF-MIB::asfTrapPSUMismatchNormal,,,,,,Power Supply Mismatch Error Cleared (Configuration Error Cleared)
.1.3.6.1.4.1.3183.1.1.0.552839,DELL-ASF-MIB::asfTrapSystemPowerNormal,,,,,,System Power Exceeds Warning Cleared
.1.3.6.1.4.1.3183.1.1.0.721159,DELL-ASF-MIB::asfTrapOverUsageSensorWarning,,,,,,Usage Sensor Over Utilization Warning (Upper Non-Critical - going high)
.1.3.6.1.4.1.3183.1.1.0.721664,DELL-ASF-MIB::asfTrapSensorUnresponsive,,,,,,Generic Sensor Unresponsive or bad
.1.3.6.1.4.1.3873,QLASP-Config-MIB::qlogic,,,,,,
.1.3.6.1.4.1.3873.1,QLASP-Config-MIB::enet,,,,,,
.1.3.6.1.4.1.3873.1.2,QLASP-Config-MIB::qlasp,,,,,,
.1.3.6.1.4.1.3873.1.2.1,QLASP-Config-MIB::qlaspConfig,,,,,,
.1.3.6.1.4.1.3873.1.2.1.1,QLASP-Config-MIB::qlaspTeam,,,,,,
.1.3.6.1.4.1.3873.1.2.1.1.1,QLASP-Config-MIB::btTeamNumber,INTEGER,read-only,,mandatory,,The number of loadbalance teams present on this system.
.1.3.6.1.4.1.3873.1.2.1.1.2,QLASP-Config-MIB::btTeamTable,,not-accessible,,mandatory,,A list of team entries. The number of teams is given by the value of teamNumber.
.1.3.6.1.4.1.3873.1.2.1.1.2.1,QLASP-Config-MIB::btTeamEntry,,not-accessible,btTeamIndex,mandatory,,An entry containing team objects at the target system.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.1,QLASP-Config-MIB::btTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team. The value for  each team must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.2,QLASP-Config-MIB::btTeamName,OCTET,read-only,,mandatory,,A textual string containing name of the team
.1.3.6.1.4.1.3873.1.2.1.1.2.1.3,QLASP-Config-MIB::btTeamType,INTEGER,read-only,,mandatory,team-SLB(100):team-FEC-GEC(101):team-802-3-AD(102):team-SLB-AFD(104),The type of team, distinguished according to the attribute assigned. When team has only one physical member, the team type is ignored
.1.3.6.1.4.1.3873.1.2.1.1.2.1.4,QLASP-Config-MIB::btTeamMacAddress,OCTET,read-only,,mandatory,,Mac address of the team. Mac address is  assigned to a team when the team type is team-FEC-GEC(101) or team-802-3-AD(102)
.1.3.6.1.4.1.3873.1.2.1.1.2.1.5,QLASP-Config-MIB::btPhyNumber,INTEGER,read-only,,mandatory,,Number of physical adapters in the team
.1.3.6.1.4.1.3873.1.2.1.1.2.1.6,QLASP-Config-MIB::btVirNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters in the team 
.1.3.6.1.4.1.3873.1.2.1.1.2.1.7,QLASP-Config-MIB::btMode,INTEGER,read-only,,mandatory,primaryMode(1):standby(2),mode of this team, PrimaryMode(0) or  Standby(1). For team type other than  team-SLB(100), this should always be  PrimaryMode(0).
.1.3.6.1.4.1.3873.1.2.1.1.2.1.8,QLASP-Config-MIB::btLiveLinkEnable,INTEGER,read-only,,mandatory,disabled(1):enabled(2),LiveLink is enabled or not. Probe packet can  be enabled only for team-SLB(100) and team-SLB-AFD(104).
.1.3.6.1.4.1.3873.1.2.1.1.2.1.9,QLASP-Config-MIB::btLinkPacketFrequency,INTEGER,read-only,,mandatory,,For LiveLink feature: The frequency in  milliseconds that a link packet is to be sent.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.10,QLASP-Config-MIB::btLinkMaxRetry,INTEGER,read-only,,mandatory,,For LiveLink feature: The maximum number of  retries before failing a team member.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.11,QLASP-Config-MIB::btLinkRetryFrequency,INTEGER,read-only,,mandatory,,For LiveLink feature: The frequency (milliseconds)  a link packet is to be sent after a dropped link  packet is detected.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.12,QLASP-Config-MIB::btLinkTargetIpAddress1,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. Only the first one is mandatory  for LiveLink. All 0 is not available.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.13,QLASP-Config-MIB::btLinkTargetIpAddress2,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. This one is optional for  LiveLink. All 0 is not available.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.14,QLASP-Config-MIB::btLinkTargetIpAddress3,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. This one is optional for  LiveLink. All 0 is not available.
.1.3.6.1.4.1.3873.1.2.1.1.2.1.15,QLASP-Config-MIB::btLinkTargetIpAddress4,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. This one is optional for  LiveLink. All 0 is not available.
.1.3.6.1.4.1.3873.1.2.1.2,QLASP-Config-MIB::qlaspPhyAdapter,,,,,,
.1.3.6.1.4.1.3873.1.2.1.2.1,QLASP-Config-MIB::btPhyAdapterNumber,INTEGER,read-only,,mandatory,,Number of physical adapters presented in the physical adapter table.
.1.3.6.1.4.1.3873.1.2.1.2.2,QLASP-Config-MIB::btPhyAdapterTable,,not-accessible,,mandatory,,The phyMember tables contain the physical  adapter members of loadbalance teams.
.1.3.6.1.4.1.3873.1.2.1.2.2.1,QLASP-Config-MIB::btPhyAdapterEntry,,not-accessible,btpTeamIndex:btpAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.3873.1.2.1.2.2.1.1,QLASP-Config-MIB::btpTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.3873.1.2.1.2.2.1.2,QLASP-Config-MIB::btpAdapterIndex,INTEGER,not-accessible,,mandatory,,A value for each adapter within a team.
.1.3.6.1.4.1.3873.1.2.1.2.2.1.3,QLASP-Config-MIB::btpAdapterDesc,OCTET,read-only,,mandatory,, A textual string containing name of the adapter
.1.3.6.1.4.1.3873.1.2.1.2.2.1.4,QLASP-Config-MIB::btpMemberType,INTEGER,read-only,,mandatory,load-balance(100):standby(101),The type of adapter member.
.1.3.6.1.4.1.3873.1.2.1.2.2.1.5,QLASP-Config-MIB::btpMacAddress,OCTET,read-only,,mandatory,,Mac address of the adapter.
.1.3.6.1.4.1.3873.1.2.1.2.2.1.6,QLASP-Config-MIB::btpMemberState,INTEGER,read-only,,mandatory,unknown(1):link-up-not-join-traffic(2):disable-not-join-traffic(3):join-traffic(4),State of the interface in the team.
.1.3.6.1.4.1.3873.1.2.1.2.2.1.7,QLASP-Config-MIB::btpLiveLinkIp,IpAddress,read-only,,mandatory,,IP address for LiveLink.
.1.3.6.1.4.1.3873.1.2.1.3,QLASP-Config-MIB::qlaspVirAdapter,,,,,,
.1.3.6.1.4.1.3873.1.2.1.3.1,QLASP-Config-MIB::btVirAdapterNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters presented in the virtual adapter table.
.1.3.6.1.4.1.3873.1.2.1.3.2,QLASP-Config-MIB::btVirAdapterTable,,not-accessible,,mandatory,,The virMember tables contain the VLAN  members of loadbalance teams.
.1.3.6.1.4.1.3873.1.2.1.3.2.1,QLASP-Config-MIB::btVirAdapterEntry,,not-accessible,btvTeamIndex:btvAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.3873.1.2.1.3.2.1.1,QLASP-Config-MIB::btvTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.3873.1.2.1.3.2.1.2,QLASP-Config-MIB::btvAdapterIndex,INTEGER,not-accessible,,mandatory,,A unique value for each virtual adapter in a team.
.1.3.6.1.4.1.3873.1.2.1.3.2.1.3,QLASP-Config-MIB::btvAdapterDesc,OCTET,read-only,,mandatory,, A textual string containing name of the VLAN
.1.3.6.1.4.1.3873.1.2.1.3.2.1.4,QLASP-Config-MIB::btvVlanId,INTEGER,read-only,,mandatory,,802.1Q VLAN ID of the virtual adapter.
.1.3.6.1.4.1.3873.1.2.1.3.2.1.5,QLASP-Config-MIB::btvLinkStatus,INTEGER,read-only,,mandatory,link-up(1):link-fail(2),Virtual adapter link status
.1.3.6.1.4.1.3873.1.2.1.3.2.1.6,QLASP-Config-MIB::btvIPAddress,IpAddress,read-only,,mandatory,,IP address of the virtual adapter.
.1.3.6.1.4.1.3873.1.2.1.3.2.1.7,QLASP-Config-MIB::btvSubnetMask,IpAddress,read-only,,mandatory,,IP subnet Mask of the virtual adapter.
.1.3.6.1.4.1.3873.1.2.1.3.2.1.8,QLASP-Config-MIB::btvPhysAddress,OCTET,read-only,,mandatory,,MAC address of the virtual adapter.
.1.3.6.1.4.1.3873.1.2.1.3.2.1.9,QLASP-Config-MIB::btvLineSpeed,OCTET,read-only,,mandatory,,A textual string displays the operating speed  of the virtual adapter.
.1.3.6.1.4.1.3873.1.2.2,QLASP-Statistics-MIB::qlaspStat,,,,,,
.1.3.6.1.4.1.3873.1.2.2.1,QLASP-Statistics-MIB::qlaspTeamStat,,,,,,
.1.3.6.1.4.1.3873.1.2.2.1.1,QLASP-Statistics-MIB::btsTeamNumber,INTEGER,read-only,,mandatory,,The number of loadbalance teams present on this system.
.1.3.6.1.4.1.3873.1.2.2.1.2,QLASP-Statistics-MIB::btsTeamTable,,not-accessible,,mandatory,,A list of team entries. The number of teams is given by the value of teamNumber.
.1.3.6.1.4.1.3873.1.2.2.1.2.1,QLASP-Statistics-MIB::btsTeamEntry,,not-accessible,btsTeamIndex,mandatory,,An entry containing team statistics objects  at the target system.
.1.3.6.1.4.1.3873.1.2.2.1.2.1.1,QLASP-Statistics-MIB::btsTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.  The value for each team must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.4.1.3873.1.2.2.1.2.1.2,QLASP-Statistics-MIB::btsTeamName,OCTET,read-only,,mandatory,, A textual string containing name of the team
.1.3.6.1.4.1.3873.1.2.2.1.2.1.3,QLASP-Statistics-MIB::btsPhyNumber,INTEGER,read-only,,mandatory,,Number of physical adapters in the team
.1.3.6.1.4.1.3873.1.2.2.1.2.1.4,QLASP-Statistics-MIB::btsVirNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters in the team 
.1.3.6.1.4.1.3873.1.2.2.1.2.1.5,QLASP-Statistics-MIB::btsPacketSends,Counter32,read-only,,mandatory,,number of send packets that are forwarded to the team members, derived from physical adapter statistics.
.1.3.6.1.4.1.3873.1.2.2.1.2.1.6,QLASP-Statistics-MIB::btsPacketSendDiscardeds,Counter32,read-only,,mandatory,,number of send packets that are discarded, derived from physical adapter statistics.
.1.3.6.1.4.1.3873.1.2.2.1.2.1.7,QLASP-Statistics-MIB::btsPacketSendQueueds,Counter32,read-only,,mandatory,,number of send packets queued by driver waiting for resource
.1.3.6.1.4.1.3873.1.2.2.1.2.1.8,QLASP-Statistics-MIB::btsPacketRecvs,Counter32,read-only,,mandatory,,number of receive packets that are indicated to upper layer, derived from physical adapter statistics.
.1.3.6.1.4.1.3873.1.2.2.1.2.1.9,QLASP-Statistics-MIB::btsPacketRecvDiscardeds,Counter32,read-only,,mandatory,,number of receive packets discarded, derived from physical adapter statistics.
.1.3.6.1.4.1.3873.1.2.2.1.2.1.10,QLASP-Statistics-MIB::btsLinkPacketsSents,Counter32,read-only,,mandatory,,For LiveLink feature: Number of link packets sent  across all adapters for the team - Expressed as a  quantity.
.1.3.6.1.4.1.3873.1.2.2.1.2.1.11,QLASP-Statistics-MIB::btsLinkPacketsRetrieds,Counter32,read-only,,mandatory,,For LiveLink feature: The number of retry packets  sent across all adapters for the team - Expressed  as a quantity.
.1.3.6.1.4.1.3873.1.2.2.2,QLASP-Statistics-MIB::qlaspPhyAdapterStat,,,,,,
.1.3.6.1.4.1.3873.1.2.2.2.1,QLASP-Statistics-MIB::btsPhyAdapterNumber,INTEGER,read-only,,mandatory,,Number of physical adapters presented in the physical adapter table.
.1.3.6.1.4.1.3873.1.2.2.2.2,QLASP-Statistics-MIB::btsPhyAdapterStatTable,,not-accessible,,mandatory,,The phyMember tables contain the physical  adapter members of loadbalance teams.
.1.3.6.1.4.1.3873.1.2.2.2.2.1,QLASP-Statistics-MIB::btsPhyAdapterStatEntry,,not-accessible,btspTeamIndex:btspAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.3873.1.2.2.2.2.1.1,QLASP-Statistics-MIB::btspTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.3873.1.2.2.2.2.1.2,QLASP-Statistics-MIB::btspAdapterIndex,INTEGER,not-accessible,,mandatory,,A value for each adapter within a team.
.1.3.6.1.4.1.3873.1.2.2.2.2.1.3,QLASP-Statistics-MIB::btspAdapterDesc,OCTET,read-only,,mandatory,, A textual string containing name of the physical member
.1.3.6.1.4.1.3873.1.2.2.2.2.1.4,QLASP-Statistics-MIB::btspPacketSends,Counter32,read-only,,mandatory,,number of send request completed by miniport .
.1.3.6.1.4.1.3873.1.2.2.2.2.1.5,QLASP-Statistics-MIB::btspPacketSendDiscardeds,Counter32,read-only,,mandatory,,number of send request discarded.
.1.3.6.1.4.1.3873.1.2.2.2.2.1.6,QLASP-Statistics-MIB::btspPacketRecvs,Counter32,read-only,,mandatory,,number of receive packets that are indicated to upper layer.
.1.3.6.1.4.1.3873.1.2.2.2.2.1.7,QLASP-Statistics-MIB::btspPacketRecvDiscardeds,Counter32,read-only,,mandatory,, number of receive packets discarded.
.1.3.6.1.4.1.3873.1.2.2.2.2.1.8,QLASP-Statistics-MIB::btspLinkPacketsSents,Counter32,read-only,,mandatory,,For LiveLink feature: Number of link packets  sent vis the adapters for the team -  Expressed as a quantity.
.1.3.6.1.4.1.3873.1.2.2.2.2.1.9,QLASP-Statistics-MIB::btspLinkPacketsRetrieds,Counter32,read-only,,mandatory,,For LiveLink feature: The number of retry packets  sent via the adapters for the team - Expressed  as a quantity.
.1.3.6.1.4.1.3873.1.2.2.3,QLASP-Statistics-MIB::qlaspVirAdapterStat,,,,,,
.1.3.6.1.4.1.3873.1.2.2.3.1,QLASP-Statistics-MIB::btsVirAdapterNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters presented in the virtual adapter table.
.1.3.6.1.4.1.3873.1.2.2.3.2,QLASP-Statistics-MIB::btsVirAdapterStatTable,,not-accessible,,mandatory,,The phyMember tables contain the physical  adapter members of loadbalance teams.
.1.3.6.1.4.1.3873.1.2.2.3.2.1,QLASP-Statistics-MIB::btsVirAdapterStatEntry,,not-accessible,btsvTeamIndex:btsvAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.3873.1.2.2.3.2.1.1,QLASP-Statistics-MIB::btsvTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.3873.1.2.2.3.2.1.2,QLASP-Statistics-MIB::btsvAdapterIndex,INTEGER,not-accessible,,mandatory,,A value for each adapter within a team.
.1.3.6.1.4.1.3873.1.2.2.3.2.1.3,QLASP-Statistics-MIB::btsvAdapterDesc,OCTET,read-only,,mandatory,,A textual string containing name of the virtual member
.1.3.6.1.4.1.3873.1.2.2.3.2.1.4,QLASP-Statistics-MIB::btsvPacketSends,Counter32,read-only,,mandatory,,number of send request completed .
.1.3.6.1.4.1.3873.1.2.2.3.2.1.5,QLASP-Statistics-MIB::btsvPacketSendQueueds,Counter32,read-only,,mandatory,,number of send request being queued by driver waiting for resource
.1.3.6.1.4.1.3873.1.2.2.3.2.1.6,QLASP-Statistics-MIB::btsvPacketRecvs,Counter32,read-only,,mandatory,, number of receive indicated to upper layer successfully.
.1.3.6.1.4.1.3873.1.2.3,QLGC-QLASPTrap-MIB::qlaspTrap,,,,,,
.1.3.6.1.4.1.3873.1.2.3.0,QLGC-QLASPTrap-MIB::qlaspTrap#,,,,,,
.1.3.6.1.4.1.3873.1.2.3.0.1,QLGC-QLASPTrap-MIB::failoverEvent,,,,,,This trap is generated to indicate that adapter Fail-Over  event has occured
.1.3.6.1.4.1.3873.1.2.3.1,QLGC-QLASPTrap-MIB::trapAdapterName,OCTET,read-only,,mandatory,,The adapter name.
.1.3.6.1.4.1.3873.1.2.3.2,QLGC-QLASPTrap-MIB::trapTeamName,OCTET,read-only,,mandatory,,The team name.
.1.3.6.1.4.1.3873.1.2.3.3,QLGC-QLASPTrap-MIB::trapCauseDirection,INTEGER,read-only,,mandatory,adapterActive(1):adapterInactive(2),Event caused by failover condition.
.1.3.6.1.4.1.3873.1.2.3.4,QLGC-QLASPTrap-MIB::trapAdapterActivityCause,INTEGER,read-only,,mandatory,none(1):linkChange(2):adapterEnabledOrDisabled(3):adapterAddedOrRemoved(4),Addition explanation for the Event trapCauseDirection.
.1.3.6.1.4.1.3873.1.3,QLGC-adapterInfo-MIB::ifControllers,,,,,,
.1.3.6.1.4.1.3873.1.3.1,QLGC-adapterInfo-MIB::ifiNumber,INTEGER,read-only,,mandatory,,The number of QLogic network interfaces (regardless of their current state) present on this system.
.1.3.6.1.4.1.3873.1.3.2,QLGC-adapterInfo-MIB::ifiTable,,not-accessible,,mandatory,,A list of QLogic network interface entries.  The number of entries is given by the ifiNumber.
.1.3.6.1.4.1.3873.1.3.2.1,QLGC-adapterInfo-MIB::ifiEntry,,not-accessible,ifiIndex,mandatory,,An entry containing statistics objects of a QLogic network interface in this system.
.1.3.6.1.4.1.3873.1.3.2.1.1,QLGC-adapterInfo-MIB::ifiIndex,INTEGER,not-accessible,,mandatory,,An unique value for each QLogic interface. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.4.1.3873.1.3.2.1.2,QLGC-adapterInfo-MIB::ifName,OCTET,read-only,,mandatory,, A textual string containing name of the adapter or team
.1.3.6.1.4.1.3873.1.3.2.1.3,QLGC-adapterInfo-MIB::ifiDescr,OCTET,read-only,,mandatory,, A textual string containing the adapter or team description
.1.3.6.1.4.1.3873.1.3.2.1.4,QLGC-adapterInfo-MIB::ifNetworkAddress,IpAddress,read-only,,mandatory,,IP address of the adapter.
.1.3.6.1.4.1.3873.1.3.2.1.5,QLGC-adapterInfo-MIB::ifSubnetMask,IpAddress,read-only,,mandatory,,IP subnet Mask of the adapter.
.1.3.6.1.4.1.3873.1.3.2.1.6,QLGC-adapterInfo-MIB::ifiPhysAddress,OCTET,read-only,,mandatory,,MAC address of the adapter.
.1.3.6.1.4.1.3873.1.3.2.1.7,QLGC-adapterInfo-MIB::ifPermPhysAddress,OCTET,read-only,,mandatory,,Permanent MAC address of the adapter.
.1.3.6.1.4.1.3873.1.3.2.1.8,QLGC-adapterInfo-MIB::ifLinkStatus,INTEGER,read-only,,mandatory,link-up(1):link-fail(2), Adapter link status, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.9,QLGC-adapterInfo-MIB::ifState,INTEGER,read-only,,mandatory,normal-mode(1):diagnotic-mode(2):adapter-removed(3):lowpower-mode(4),The operating mode of the driver, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.10,QLGC-adapterInfo-MIB::ifLineSpeed,INTEGER,read-only,,mandatory,unknown(1):speed-10-Mbps(2):speed-100-Mbps(3):speed-1000-Mbps(4):speed-2500-Mbps(5):speed-10-Gbps(6), The operating speed of the adapter, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.11,QLGC-adapterInfo-MIB::ifDuplexMode,INTEGER,read-only,,mandatory,unknown(1):half-duplex(2):full-duplex(3), Adapter duplex mode, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.12,QLGC-adapterInfo-MIB::ifMemBaseLow,OCTET,read-only,,mandatory,, memory low range of the adapter, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.13,QLGC-adapterInfo-MIB::ifMemBaseHigh,OCTET,read-only,,mandatory,, memory high range of the adapter, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.14,QLGC-adapterInfo-MIB::ifInterrupt,INTEGER,read-only,,mandatory,, IRQ value for the adapter, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.15,QLGC-adapterInfo-MIB::ifBusNumber,INTEGER,read-only,,mandatory,, PCI Bus Number where the Adapter is situated, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.16,QLGC-adapterInfo-MIB::ifDeviceNumber,INTEGER,read-only,,mandatory,, PCI Device Number of the adapter, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.17,QLGC-adapterInfo-MIB::ifFunctionNumber,INTEGER,read-only,,mandatory,, PCI Function Number of the adapter, this information only applicable to the QLogic adapter
.1.3.6.1.4.1.3873.1.3.2.1.18,QLGC-adapterInfo-MIB::ifIpv6NetworkAddress,OCTET,read-only,,mandatory,,IPv6 address of the adapter.
.1.3.6.1.4.1.4413,BASP-Config-MIB::broadcom,,,,,,
.1.3.6.1.4.1.4413.1,BASP-Config-MIB::enet,,,,,,
.1.3.6.1.4.1.4413.1.2,BASP-Config-MIB::basp,,,,,,
.1.3.6.1.4.1.4413.1.2.1,BASP-Config-MIB::baspConfig,,,,,,
.1.3.6.1.4.1.4413.1.2.1.1,BASP-Config-MIB::baspTeam,,,,,,
.1.3.6.1.4.1.4413.1.2.1.1.1,BASP-Config-MIB::btTeamNumber,INTEGER,read-only,,mandatory,,The number of loadbalance teams present on this system.
.1.3.6.1.4.1.4413.1.2.1.1.2,BASP-Config-MIB::btTeamTable,,not-accessible,,mandatory,,A list of team entries. The number of teams is given by the value of teamNumber.
.1.3.6.1.4.1.4413.1.2.1.1.2.1,BASP-Config-MIB::btTeamEntry,,not-accessible,btTeamIndex,mandatory,,An entry containing team objects at the target system.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.1,BASP-Config-MIB::btTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team. The value for  each team must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.2,BASP-Config-MIB::btTeamName,OCTET,read-only,,mandatory,,A textual string containing name of the team
.1.3.6.1.4.1.4413.1.2.1.1.2.1.3,BASP-Config-MIB::btTeamType,INTEGER,read-only,,mandatory,team-SLB(100):team-FEC-GEC(101):team-802-3-AD(102):team-SLB-AFD(104),The type of team, distinguished according to the attribute assigned. When team has only one physical member, the team type is ignored
.1.3.6.1.4.1.4413.1.2.1.1.2.1.4,BASP-Config-MIB::btTeamMacAddress,OCTET,read-only,,mandatory,,Mac address of the team. Mac address is  assigned to a team when the team type is team-FEC-GEC(101) or team-802-3-AD(102)
.1.3.6.1.4.1.4413.1.2.1.1.2.1.5,BASP-Config-MIB::btPhyNumber,INTEGER,read-only,,mandatory,,Number of physical adapters in the team
.1.3.6.1.4.1.4413.1.2.1.1.2.1.6,BASP-Config-MIB::btVirNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters in the team 
.1.3.6.1.4.1.4413.1.2.1.1.2.1.7,BASP-Config-MIB::btMode,INTEGER,read-only,,mandatory,primaryMode(1):standby(2),mode of this team, PrimaryMode(0) or  Standby(1). For team type other than  team-SLB(100), this should always be  PrimaryMode(0).
.1.3.6.1.4.1.4413.1.2.1.1.2.1.8,BASP-Config-MIB::btLiveLinkEnable,INTEGER,read-only,,mandatory,disabled(1):enabled(2),LiveLink is enabled or not. Probe packet can  be enabled only for team-SLB(100) and team-SLB-AFD(104).
.1.3.6.1.4.1.4413.1.2.1.1.2.1.9,BASP-Config-MIB::btLinkPacketFrequency,INTEGER,read-only,,mandatory,,For LiveLink feature: The frequency in  milliseconds that a link packet is to be sent.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.10,BASP-Config-MIB::btLinkMaxRetry,INTEGER,read-only,,mandatory,,For LiveLink feature: The maximum number of  retries before failing a team member.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.11,BASP-Config-MIB::btLinkRetryFrequency,INTEGER,read-only,,mandatory,,For LiveLink feature: The frequency (milliseconds)  a link packet is to be sent after a dropped link  packet is detected.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.12,BASP-Config-MIB::btLinkTargetIpAddress1,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. Only the first one is mandatory  for LiveLink. All 0 is not available.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.13,BASP-Config-MIB::btLinkTargetIpAddress2,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. This one is optional for  LiveLink. All 0 is not available.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.14,BASP-Config-MIB::btLinkTargetIpAddress3,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. This one is optional for  LiveLink. All 0 is not available.
.1.3.6.1.4.1.4413.1.2.1.1.2.1.15,BASP-Config-MIB::btLinkTargetIpAddress4,IpAddress,read-only,,mandatory,,For LiveLink feature: The target IP address that  a link packet is sent to. A DNS name cannot be  specified since there is no reliable method to  resolve the DNS name without introducing  unacceptable risk. This one is optional for  LiveLink. All 0 is not available.
.1.3.6.1.4.1.4413.1.2.1.2,BASP-Config-MIB::baspPhyAdapter,,,,,,
.1.3.6.1.4.1.4413.1.2.1.2.1,BASP-Config-MIB::btPhyAdapterNumber,INTEGER,read-only,,mandatory,,Number of physical adapters presented in the physical adapter table.
.1.3.6.1.4.1.4413.1.2.1.2.2,BASP-Config-MIB::btPhyAdapterTable,,not-accessible,,mandatory,,The phyMember tables contain the physical  adapter members of loadbalance teams.
.1.3.6.1.4.1.4413.1.2.1.2.2.1,BASP-Config-MIB::btPhyAdapterEntry,,not-accessible,btpTeamIndex:btpAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.4413.1.2.1.2.2.1.1,BASP-Config-MIB::btpTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.4413.1.2.1.2.2.1.2,BASP-Config-MIB::btpAdapterIndex,INTEGER,not-accessible,,mandatory,,A value for each adapter within a team.
.1.3.6.1.4.1.4413.1.2.1.2.2.1.3,BASP-Config-MIB::btpAdapterDesc,OCTET,read-only,,mandatory,, A textual string containing name of the adapter
.1.3.6.1.4.1.4413.1.2.1.2.2.1.4,BASP-Config-MIB::btpMemberType,INTEGER,read-only,,mandatory,load-balance(100):standby(101),The type of adapter member.
.1.3.6.1.4.1.4413.1.2.1.2.2.1.5,BASP-Config-MIB::btpMacAddress,OCTET,read-only,,mandatory,,Mac address of the adapter.
.1.3.6.1.4.1.4413.1.2.1.2.2.1.6,BASP-Config-MIB::btpMemberState,INTEGER,read-only,,mandatory,unknown(1):link-up-not-join-traffic(2):disable-not-join-traffic(3):join-traffic(4),State of the interface in the team.
.1.3.6.1.4.1.4413.1.2.1.2.2.1.7,BASP-Config-MIB::btpLiveLinkIp,IpAddress,read-only,,mandatory,,IP address for LiveLink.
.1.3.6.1.4.1.4413.1.2.1.3,BASP-Config-MIB::baspVirAdapter,,,,,,
.1.3.6.1.4.1.4413.1.2.1.3.1,BASP-Config-MIB::btVirAdapterNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters presented in the virtual adapter table.
.1.3.6.1.4.1.4413.1.2.1.3.2,BASP-Config-MIB::btVirAdapterTable,,not-accessible,,mandatory,,The virMember tables contain the VLAN  members of loadbalance teams.
.1.3.6.1.4.1.4413.1.2.1.3.2.1,BASP-Config-MIB::btVirAdapterEntry,,not-accessible,btvTeamIndex:btvAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.4413.1.2.1.3.2.1.1,BASP-Config-MIB::btvTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.4413.1.2.1.3.2.1.2,BASP-Config-MIB::btvAdapterIndex,INTEGER,not-accessible,,mandatory,,A unique value for each virtual adapter in a team.
.1.3.6.1.4.1.4413.1.2.1.3.2.1.3,BASP-Config-MIB::btvAdapterDesc,OCTET,read-only,,mandatory,, A textual string containing name of the VLAN
.1.3.6.1.4.1.4413.1.2.1.3.2.1.4,BASP-Config-MIB::btvVlanId,INTEGER,read-only,,mandatory,,802.1Q VLAN ID of the virtual adapter.
.1.3.6.1.4.1.4413.1.2.1.3.2.1.5,BASP-Config-MIB::btvLinkStatus,INTEGER,read-only,,mandatory,link-up(1):link-fail(2),Virtual adapter link status
.1.3.6.1.4.1.4413.1.2.1.3.2.1.6,BASP-Config-MIB::btvIPAddress,IpAddress,read-only,,mandatory,,IP address of the virtual adapter.
.1.3.6.1.4.1.4413.1.2.1.3.2.1.7,BASP-Config-MIB::btvSubnetMask,IpAddress,read-only,,mandatory,,IP subnet Mask of the virtual adapter.
.1.3.6.1.4.1.4413.1.2.1.3.2.1.8,BASP-Config-MIB::btvPhysAddress,OCTET,read-only,,mandatory,,MAC address of the virtual adapter.
.1.3.6.1.4.1.4413.1.2.1.3.2.1.9,BASP-Config-MIB::btvLineSpeed,OCTET,read-only,,mandatory,,A textual string displays the operating speed  of the virtual adapter.
.1.3.6.1.4.1.4413.1.2.2,BASP-Statistics-MIB::baspStat,,,,,,
.1.3.6.1.4.1.4413.1.2.2.1,BASP-Statistics-MIB::baspTeamStat,,,,,,
.1.3.6.1.4.1.4413.1.2.2.1.1,BASP-Statistics-MIB::btsTeamNumber,INTEGER,read-only,,mandatory,,The number of loadbalance teams present on this system.
.1.3.6.1.4.1.4413.1.2.2.1.2,BASP-Statistics-MIB::btsTeamTable,,not-accessible,,mandatory,,A list of team entries. The number of teams is given by the value of teamNumber.
.1.3.6.1.4.1.4413.1.2.2.1.2.1,BASP-Statistics-MIB::btsTeamEntry,,not-accessible,btsTeamIndex,mandatory,,An entry containing team statistics objects  at the target system.
.1.3.6.1.4.1.4413.1.2.2.1.2.1.1,BASP-Statistics-MIB::btsTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.  The value for each team must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.4.1.4413.1.2.2.1.2.1.2,BASP-Statistics-MIB::btsTeamName,OCTET,read-only,,mandatory,, A textual string containing name of the team
.1.3.6.1.4.1.4413.1.2.2.1.2.1.3,BASP-Statistics-MIB::btsPhyNumber,INTEGER,read-only,,mandatory,,Number of physical adapters in the team
.1.3.6.1.4.1.4413.1.2.2.1.2.1.4,BASP-Statistics-MIB::btsVirNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters in the team 
.1.3.6.1.4.1.4413.1.2.2.1.2.1.5,BASP-Statistics-MIB::btsPacketSends,Counter32,read-only,,mandatory,,number of send packets that are forwarded to the team members, derived from physical adapter statistics.
.1.3.6.1.4.1.4413.1.2.2.1.2.1.6,BASP-Statistics-MIB::btsPacketSendDiscardeds,Counter32,read-only,,mandatory,,number of send packets that are discarded, derived from physical adapter statistics.
.1.3.6.1.4.1.4413.1.2.2.1.2.1.7,BASP-Statistics-MIB::btsPacketSendQueueds,Counter32,read-only,,mandatory,,number of send packets queued by driver waiting for resource
.1.3.6.1.4.1.4413.1.2.2.1.2.1.8,BASP-Statistics-MIB::btsPacketRecvs,Counter32,read-only,,mandatory,,number of receive packets that are indicated to upper layer, derived from physical adapter statistics.
.1.3.6.1.4.1.4413.1.2.2.1.2.1.9,BASP-Statistics-MIB::btsPacketRecvDiscardeds,Counter32,read-only,,mandatory,,number of receive packets discarded, derived from physical adapter statistics.
.1.3.6.1.4.1.4413.1.2.2.1.2.1.10,BASP-Statistics-MIB::btsLinkPacketsSents,Counter32,read-only,,mandatory,,For LiveLink feature: Number of link packets sent  across all adapters for the team - Expressed as a  quantity.
.1.3.6.1.4.1.4413.1.2.2.1.2.1.11,BASP-Statistics-MIB::btsLinkPacketsRetrieds,Counter32,read-only,,mandatory,,For LiveLink feature: The number of retry packets  sent across all adapters for the team - Expressed  as a quantity.
.1.3.6.1.4.1.4413.1.2.2.2,BASP-Statistics-MIB::baspPhyAdapterStat,,,,,,
.1.3.6.1.4.1.4413.1.2.2.2.1,BASP-Statistics-MIB::btsPhyAdapterNumber,INTEGER,read-only,,mandatory,,Number of physical adapters presented in the physical adapter table.
.1.3.6.1.4.1.4413.1.2.2.2.2,BASP-Statistics-MIB::btsPhyAdapterStatTable,,not-accessible,,mandatory,,The phyMember tables contain the physical  adapter members of loadbalance teams.
.1.3.6.1.4.1.4413.1.2.2.2.2.1,BASP-Statistics-MIB::btsPhyAdapterStatEntry,,not-accessible,btspTeamIndex:btspAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.4413.1.2.2.2.2.1.1,BASP-Statistics-MIB::btspTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.4413.1.2.2.2.2.1.2,BASP-Statistics-MIB::btspAdapterIndex,INTEGER,not-accessible,,mandatory,,A value for each adapter within a team.
.1.3.6.1.4.1.4413.1.2.2.2.2.1.3,BASP-Statistics-MIB::btspAdapterDesc,OCTET,read-only,,mandatory,, A textual string containing name of the physical member
.1.3.6.1.4.1.4413.1.2.2.2.2.1.4,BASP-Statistics-MIB::btspPacketSends,Counter32,read-only,,mandatory,,number of send request completed by miniport .
.1.3.6.1.4.1.4413.1.2.2.2.2.1.5,BASP-Statistics-MIB::btspPacketSendDiscardeds,Counter32,read-only,,mandatory,,number of send request discarded.
.1.3.6.1.4.1.4413.1.2.2.2.2.1.6,BASP-Statistics-MIB::btspPacketRecvs,Counter32,read-only,,mandatory,,number of receive packets that are indicated to upper layer.
.1.3.6.1.4.1.4413.1.2.2.2.2.1.7,BASP-Statistics-MIB::btspPacketRecvDiscardeds,Counter32,read-only,,mandatory,, number of receive packets discarded.
.1.3.6.1.4.1.4413.1.2.2.2.2.1.8,BASP-Statistics-MIB::btspLinkPacketsSents,Counter32,read-only,,mandatory,,For LiveLink feature: Number of link packets  sent vis the adapters for the team -  Expressed as a quantity.
.1.3.6.1.4.1.4413.1.2.2.2.2.1.9,BASP-Statistics-MIB::btspLinkPacketsRetrieds,Counter32,read-only,,mandatory,,For LiveLink feature: The number of retry packets  sent via the adapters for the team - Expressed  as a quantity.
.1.3.6.1.4.1.4413.1.2.2.3,BASP-Statistics-MIB::baspVirAdapterStat,,,,,,
.1.3.6.1.4.1.4413.1.2.2.3.1,BASP-Statistics-MIB::btsVirAdapterNumber,INTEGER,read-only,,mandatory,,Number of virtual adapters presented in the virtual adapter table.
.1.3.6.1.4.1.4413.1.2.2.3.2,BASP-Statistics-MIB::btsVirAdapterStatTable,,not-accessible,,mandatory,,The phyMember tables contain the physical  adapter members of loadbalance teams.
.1.3.6.1.4.1.4413.1.2.2.3.2.1,BASP-Statistics-MIB::btsVirAdapterStatEntry,,not-accessible,btsvTeamIndex:btsvAdapterIndex,mandatory,,A team entry containing objects at the target system.
.1.3.6.1.4.1.4413.1.2.2.3.2.1.1,BASP-Statistics-MIB::btsvTeamIndex,INTEGER,not-accessible,,mandatory,,An unique value for each team.
.1.3.6.1.4.1.4413.1.2.2.3.2.1.2,BASP-Statistics-MIB::btsvAdapterIndex,INTEGER,not-accessible,,mandatory,,A value for each adapter within a team.
.1.3.6.1.4.1.4413.1.2.2.3.2.1.3,BASP-Statistics-MIB::btsvAdapterDesc,OCTET,read-only,,mandatory,,A textual string containing name of the virtual member
.1.3.6.1.4.1.4413.1.2.2.3.2.1.4,BASP-Statistics-MIB::btsvPacketSends,Counter32,read-only,,mandatory,,number of send request completed .
.1.3.6.1.4.1.4413.1.2.2.3.2.1.5,BASP-Statistics-MIB::btsvPacketSendQueueds,Counter32,read-only,,mandatory,,number of send request being queued by driver waiting for resource
.1.3.6.1.4.1.4413.1.2.2.3.2.1.6,BASP-Statistics-MIB::btsvPacketRecvs,Counter32,read-only,,mandatory,, number of receive indicated to upper layer successfully.
.1.3.6.1.4.1.4413.1.2.3,Brcm-BASPTrap-MIB::baspTrap,,,,,,
.1.3.6.1.4.1.4413.1.2.3.0,Brcm-BASPTrap-MIB::baspTrap#,,,,,,
.1.3.6.1.4.1.4413.1.2.3.0.1,Brcm-BASPTrap-MIB::failoverEvent,,,,,,This trap is generated to indicate that adapter Fail-Over  event has occured
.1.3.6.1.4.1.4413.1.2.3.1,Brcm-BASPTrap-MIB::trapAdapterName,OCTET,read-only,,mandatory,,The adapter name.
.1.3.6.1.4.1.4413.1.2.3.2,Brcm-BASPTrap-MIB::trapTeamName,OCTET,read-only,,mandatory,,The team name.
.1.3.6.1.4.1.4413.1.2.3.3,Brcm-BASPTrap-MIB::trapCauseDirection,INTEGER,read-only,,mandatory,adapterActive(1):adapterInactive(2),Event caused by failover condition.
.1.3.6.1.4.1.4413.1.2.3.4,Brcm-BASPTrap-MIB::trapAdapterActivityCause,INTEGER,read-only,,mandatory,none(1):linkChange(2):adapterEnabledOrDisabled(3):adapterAddedOrRemoved(4),Addition explanation for the Event trapCauseDirection.
.1.3.6.1.4.1.4413.1.3,Brcm-adapterInfo-MIB::ifControllers,,,,,,
.1.3.6.1.4.1.4413.1.3.1,Brcm-adapterInfo-MIB::ifiNumber,INTEGER,read-only,,mandatory,,The number of Broadcom network interfaces (regardless of their current state) present on this system.
.1.3.6.1.4.1.4413.1.3.2,Brcm-adapterInfo-MIB::ifiTable,,not-accessible,,mandatory,,A list of Broadcom network interface entries.  The number of entries is given by the ifiNumber.
.1.3.6.1.4.1.4413.1.3.2.1,Brcm-adapterInfo-MIB::ifiEntry,,not-accessible,ifiIndex,mandatory,,An entry containing statistics objects of a Broadcom network interface in this system.
.1.3.6.1.4.1.4413.1.3.2.1.1,Brcm-adapterInfo-MIB::ifiIndex,INTEGER,not-accessible,,mandatory,,An unique value for each Broadcom interface. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.4.1.4413.1.3.2.1.2,Brcm-adapterInfo-MIB::ifName,OCTET,read-only,,mandatory,, A textual string containing name of the adapter or team
.1.3.6.1.4.1.4413.1.3.2.1.3,Brcm-adapterInfo-MIB::ifiDescr,OCTET,read-only,,mandatory,, A textual string containing the adapter or team description
.1.3.6.1.4.1.4413.1.3.2.1.4,Brcm-adapterInfo-MIB::ifNetworkAddress,IpAddress,read-only,,mandatory,,IP address of the adapter.
.1.3.6.1.4.1.4413.1.3.2.1.5,Brcm-adapterInfo-MIB::ifSubnetMask,IpAddress,read-only,,mandatory,,IP subnet Mask of the adapter.
.1.3.6.1.4.1.4413.1.3.2.1.6,Brcm-adapterInfo-MIB::ifiPhysAddress,OCTET,read-only,,mandatory,,MAC address of the adapter.
.1.3.6.1.4.1.4413.1.3.2.1.7,Brcm-adapterInfo-MIB::ifPermPhysAddress,OCTET,read-only,,mandatory,,Permanent MAC address of the adapter.
.1.3.6.1.4.1.4413.1.3.2.1.8,Brcm-adapterInfo-MIB::ifLinkStatus,INTEGER,read-only,,mandatory,link-up(1):link-fail(2), Adapter link status, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.9,Brcm-adapterInfo-MIB::ifState,INTEGER,read-only,,mandatory,normal-mode(1):diagnotic-mode(2):adapter-removed(3):lowpower-mode(4),The operating mode of the driver, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.10,Brcm-adapterInfo-MIB::ifLineSpeed,INTEGER,read-only,,mandatory,unknown(1):speed-10-Mbps(2):speed-100-Mbps(3):speed-1000-Mbps(4):speed-2500-Mbps(5):speed-10-Gbps(6), The operating speed of the adapter, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.11,Brcm-adapterInfo-MIB::ifDuplexMode,INTEGER,read-only,,mandatory,unknown(1):half-duplex(2):full-duplex(3), Adapter duplex mode, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.12,Brcm-adapterInfo-MIB::ifMemBaseLow,OCTET,read-only,,mandatory,, memory low range of the adapter, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.13,Brcm-adapterInfo-MIB::ifMemBaseHigh,OCTET,read-only,,mandatory,, memory high range of the adapter, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.14,Brcm-adapterInfo-MIB::ifInterrupt,INTEGER,read-only,,mandatory,, IRQ value for the adapter, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.15,Brcm-adapterInfo-MIB::ifBusNumber,INTEGER,read-only,,mandatory,, PCI Bus Number where the Adapter is situated, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.16,Brcm-adapterInfo-MIB::ifDeviceNumber,INTEGER,read-only,,mandatory,, PCI Device Number of the adapter, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.17,Brcm-adapterInfo-MIB::ifFunctionNumber,INTEGER,read-only,,mandatory,, PCI Function Number of the adapter, this information only applicable to the Broadcom adapter
.1.3.6.1.4.1.4413.1.3.2.1.18,Brcm-adapterInfo-MIB::ifIpv6NetworkAddress,OCTET,read-only,,mandatory,,IPv6 address of the adapter.
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
.1.3.6.1.6.3.1,SNMPv2-MIB::snmpMIB,,,,,,The MIB module for SNMP entities. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3418; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.1.1,SNMPv2-MIB::snmpMIBObjects,,,,,,
.1.3.6.1.6.3.1.1.4,SNMPv2-MIB::snmpTrap,,,,,,
.1.3.6.1.6.3.1.1.4.1,SNMPv2-MIB::snmpTrapOID,OBJECT,accessible-for-notify,,current,,The authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU.
.1.3.6.1.6.3.1.1.4.3,SNMPv2-MIB::snmpTrapEnterprise,OBJECT,accessible-for-notify,,current,,The authoritative identification of the enterprise associated with the trap currently being sent. When an SNMP proxy agent is mapping an RFC1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind.
.1.3.6.1.6.3.1.1.5,SNMPv2-MIB::snmpTraps,,,,,,
.1.3.6.1.6.3.1.1.5.1,SNMPv2-MIB::coldStart,,,,,,A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
.1.3.6.1.6.3.1.1.5.2,SNMPv2-MIB::warmStart,,,,,,A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.1.5.3,IF-MIB::linkDown,,,,,,A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.4,IF-MIB::linkUp,,,,,,A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.5,SNMPv2-MIB::authenticationFailure,,,,,,An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
.1.3.6.1.6.3.1.1.6,SNMPv2-MIB::snmpSet,,,,,,
.1.3.6.1.6.3.1.1.6.1,SNMPv2-MIB::snmpSetSerialNo,INTEGER,read-write,,current,,An advisory lock used to allow several cooperating command generator applications to coordinate their use of the SNMP set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.
.1.3.6.1.6.3.1.2,SNMPv2-MIB::snmpMIBConformance,,,,,,
.1.3.6.1.6.3.1.2.1,SNMPv2-MIB::snmpMIBCompliances,,,,,,
.1.3.6.1.6.3.1.2.1.2,SNMPv2-MIB::snmpBasicCompliance,,,,,,The compliance statement for SNMPv2 entities which implement the SNMPv2 MIB. This compliance statement is replaced by snmpBasicComplianceRev2.
.1.3.6.1.6.3.1.2.1.3,SNMPv2-MIB::snmpBasicComplianceRev2,,,,,,The compliance statement for SNMP entities which implement this MIB module.
.1.3.6.1.6.3.1.2.2,SNMPv2-MIB::snmpMIBGroups,,,,,,
.1.3.6.1.6.3.1.2.2.5,SNMPv2-MIB::snmpSetGroup,,,,,,A collection of objects which allow several cooperating command generator applications to coordinate their use of the set operation.
.1.3.6.1.6.3.1.2.2.6,SNMPv2-MIB::systemGroup,,,,,,The system group defines objects which are common to all managed systems.
.1.3.6.1.6.3.1.2.2.7,SNMPv2-MIB::snmpBasicNotificationsGroup,,,,,,The basic notifications implemented by an SNMP entity supporting command responder applications.
.1.3.6.1.6.3.1.2.2.8,SNMPv2-MIB::snmpGroup,,,,,,A collection of objects providing basic instrumentation and control of an SNMP entity.
.1.3.6.1.6.3.1.2.2.9,SNMPv2-MIB::snmpCommunityGroup,,,,,,A collection of objects providing basic instrumentation of a SNMP entity which supports community-based authentication.
.1.3.6.1.6.3.1.2.2.10,SNMPv2-MIB::snmpObsoleteGroup,,,,,,A collection of objects from RFC 1213 made obsolete by this MIB module.
.1.3.6.1.6.3.1.2.2.11,SNMPv2-MIB::snmpWarmStartNotificationGroup,,,,,,An additional notification for an SNMP entity supporting command responder applications, if it is able to reinitialize itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.2.2.12,SNMPv2-MIB::snmpNotificationGroup,,,,,,These objects are required for entities which support notification originator applications.
.1.3.6.1.6.3.10,SNMP-FRAMEWORK-MIB::snmpFrameworkMIB,,,,,,The SNMP Management Architecture MIB Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3411; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.10.1,SNMP-FRAMEWORK-MIB::snmpFrameworkAdmin,,,,,,
.1.3.6.1.6.3.10.1.1,SNMP-FRAMEWORK-MIB::snmpAuthProtocols,,,,,,Registration point for standards-track authentication protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.1.2,SNMP-FRAMEWORK-MIB::snmpPrivProtocols,,,,,,Registration point for standards-track privacy protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBObjects,,,,,,
.1.3.6.1.6.3.10.2.1,SNMP-FRAMEWORK-MIB::snmpEngine,,,,,,
.1.3.6.1.6.3.10.2.1.1,SNMP-FRAMEWORK-MIB::snmpEngineID,OCTET,read-only,,current,,An SNMP engine's administratively-unique identifier. This information SHOULD be stored in non-volatile storage so that it remains constant across re-initializations of the SNMP engine. 
.1.3.6.1.6.3.10.2.1.2,SNMP-FRAMEWORK-MIB::snmpEngineBoots,INTEGER,read-only,,current,,The number of times that the SNMP engine has (re-)initialized itself since snmpEngineID was last configured. 
.1.3.6.1.6.3.10.2.1.3,SNMP-FRAMEWORK-MIB::snmpEngineTime,INTEGER,read-only,,current,,The number of seconds since the value of the snmpEngineBoots object last changed. When incrementing this object's value would cause it to exceed its maximum, snmpEngineBoots is incremented as if a re-initialization had occurred, and this object's value consequently reverts to zero. 
.1.3.6.1.6.3.10.2.1.4,SNMP-FRAMEWORK-MIB::snmpEngineMaxMessageSize,INTEGER,read-only,,current,,The maximum length in octets of an SNMP message which this SNMP engine can send or receive and process, determined as the minimum of the maximum message size values supported among all of the transports available to and supported by the engine. 
.1.3.6.1.6.3.10.3,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBConformance,,,,,,
.1.3.6.1.6.3.10.3.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliances,,,,,,
.1.3.6.1.6.3.10.3.1.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance,,,,,,The compliance statement for SNMP engines which implement the SNMP Management Framework MIB. 
.1.3.6.1.6.3.10.3.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBGroups,,,,,,
.1.3.6.1.6.3.10.3.2.1,SNMP-FRAMEWORK-MIB::snmpEngineGroup,,,,,,A collection of objects for identifying and determining the configuration and current timeliness values of an SNMP engine. 
